Introduction • • Secondary Security • • Escape Hardware • Access Control Mortice Locks • • • Door Closers • • Rim Locks Furniture Cylinders Padlocks Hinges Introduction Introduction Product Catalogue

Catalogue Index

Cylinders Padlocks Furniture & Fittings Hinges

Mortice Locks Secondary Security Door Closers Index by Part No

Rim Locks Access Control Escape Hardware Contacting us Introduction Product Catalogue

Standards & Approvals

Chubb recognises that in addition to it’s own high quality standards Products endorsed with the UL mark have The Chubb name has been synonymous with the approval of it’s products by independent organisations is needed passed strict testing procedures under the excellence in security systems for over one control of the Underwriters Laboratories to meet the requirements of many regulations in today’s market. Incorporated. hundred and seventy five years. The consistently high standards of In order to help simplify all of these standards we have provided in engineering of its locks had already made each section of the catalogue a reference page showing each of the The ANSI reference can be claimed when a Chubb a household name by the beginning of standards. Additionally we have where applicable noted against each product conforms to the relevant American Standards Institute Specification. the twentieth century. product which standards apply to that product. Today, we may be in a new century but Chubb is still the premier name in security now Shown below are the independent standards organisation with a brief description to the meaning and reference of each. The Loss Prevention Certification Board offering high security products for both the provides approval and certification home and commercial use. As part of our marking on a range of security fittings. ongoing policy of only offering products that meet the highest levels of quality Chubb is accredited with and meets the requirements These pan-European standards classify The Master Locksmiths Association provides of BS EN ISO 9001: 1994. products into grades based on a series guidelines covering minimum security of exacting tests. levels for domestic properties.

Chubb is accredited with and meets the requirements of The Association of British Insurers provides BS EN ISO 9001: 1994. minimum security recommendations for external doors and windows.

Products endorsed with the Kitemark have passed a strict testing procedure We have made every effort to ensure that at under the control of the British The National House Building Council offers Standards Institution. general guidance on security for dwellings, time of going to print all information shown flats and maisonettes. in this catalogue is correct. However, in our efforts to continually improve our products and offer only the highest levels of security and quality we reserve Products that meet MOBH3PS have been tested to the performance specifications the right to make alterations to the issued by the Property Services Agency. product specifications shown in this catalogue. A BS reference can be claimed when a product conforms to the relevant British Standard. The application of the CE mark is currently restricted to products covered by the low voltage and EMC Directives. Introduction Product Catalogue

Security Features

Chubb have developed a series of icons to enable the 1 7 process of product specification to be simplified. We Protected Section Products are available as an option Tamper Resistant believe that these icons represent the most important Built in protection against tampering. features when looking to specify architectural hardware on a patented key section. or security products.

Throughout this whole catalogue constant reference 2 8 will be made to each of these icons. Each icon represents Drill Resistant Corrosion Resistant a feature that, irrespective of what type of product it Hardened protection against drill Products conform to appropriate relates to, can be used to identify any relevant security attack. anti-corrosion requirements. features.

Chubb, simplifying the 3 9 specification process Saw Resistant Fire Resistant Hardened protection against saw Products conform to appropriate fire attack. test requirements.

4 10 Force Resistant Escape Built in strength against force attack. Products for use on an escape door.

5 11 Pick Resistant Key Control Built in protection to resist picking. The products can be included in a key control system.

6 12 Guarantee Torque Resistant Products are guaranteed for a period Built in strength against torque of time. (Unless specified otherwise attack. this will be one year) Introduction Product Catalogue

How to Use the Catalogue

This catalogue is divided into sections by product range. Each section has been developed so that it can be used in isolation and will provide all the information required to assist when specifying from the Chubb range.

Each product range brochure has three areas of information:

1 Product Range Introduction Chubb have developed a series of Product Range Overview icons to enable the process of 2 specification to be simplified. Throughout the whole catalogue 3 Product Specifications The index is included to constant reference will be made guide you through each to these icons. section.

This page also provides explanations of terminology This page details how each of the and shows product options relevant icons are applicable to such as finishes and locking the product range shown within mechanisms. each section.

Product Range Introduction The product range introduction firstly shows the standards and In each product range introduction we have included security icons reference page information which helps to together with a page detailing explain the features, functions features and functions to be found and applications of the products 1within the range within the section. Introduction Product Catalogue

How to Use the Catalogue

This page of the catalogue shows a photo gallery of the product Product Range Overview range, which can be cross- referenced, to the specification The second area of information to be table shown on the page below. found within each product range brochure is the range overview. The double page spread acts both as a contents page for the brochure but also provides product information via the specification table which also provides a product range comparison. 2 The product specification pages contain all the relevant information to assist when specifying from the Chubb range.

The right hand side of the specification table provides all the essential information The left hand side of the relating to the features, specification table provides all the functions and finishes available essential information relating to in each individual product. how the icons apply to each individual product. Introduction Product Catalogue

How to Use the Catalogue

Each product is represented by a colour photograph.

The upper section of the specification table provides information relating to the series of security icons. 3Product Specifications The greater part of each catalogue section is devoted to providing more detailed information about each individual product. Each product is represented both with a photograph and dimensional drawing together The lower section of the with some key features and specification table provides specification table. information relating to product features and functions together with finish options.

A diagram of each product is shown providing all essential dimensional detail. Introduction Product Catalogue

Handing of Doors

Hinged doors can open in one of four ways and this will determine whether the door is Likewise double rebated doors can open in one of four ways and this will determine left or right hand. Double doors with plain meeting stiles are also handed in this manner. whether the door is left or right hand.

Single Doors Inward Opening Double Rebated Doors Inward Opening

UK Left Hand UK Right Hand UK Left Hand UK Right Hand

Outside Outside Outside Outside

Single Doors Outward Opening Double Rebated Doors Outward Opening

UK Left Hand UK Right Hand UK Left Hand UK Right Hand

Outside Outside Outside Outside Introduction Product Catalogue

Key Control Systems

There are various types of key control systems from simple key alike systems to Keyed Alike complicated grand master key suites. This refers to a number of locks It is most important that the keying requirements of a building are accurately each operated by the same key. and correctly detailed to provide security and accessibility for the keyholders of This is also referred to as alike the building. Any recommendations must relate the security of the system to the change, locks to pass or keyed to convenience of movement within the building. pass; Example Too much reliance on one side of the security, convenience balance will either sacrifice the security offered or lose the convenience factor. It is thus vitally important to strike the right balance. SECURITY CONVENIENCE 3 different locks all keyed alike Secure our help Chubb have trained technical staff who offer a free service to help with the planning of masterkey suites. Lock 1Lock 2 Lock 3

Master Keyed Grand Master Keyed This is the simplest form of master keying. Each individual A Grand master key is a control key which operates a particular number of locks which are grouped into 2 or more sets lock is operated by its own unique key and in addition a of suites (known as sub-suites) control key, (master key) operates all the locks in the suite. In this example Sub-suites A and B are in fact master-suites that are linked to a higher authority, the Grand Master Key 3 different locks each with The individual keys which will operate the individual locks are known as change keys/servant keys or differ keys and their individual key will only operate their particular lock. Chubb cylinders can be master keyed to give maximum flexibility of design and ensure that the Grand Master Key balance between security and Example Master Key convenience can be maintained. Sub-Master Key A Sub-Master Key B Example

Lock 1 Lock 2 Lock 3 Lock 1 Lock 2 Lock 3 Lock 4 Lock 5 Lock 6 introduction Product Catalogue

Key Control Systems

Keying Groups

Throughout the catalogue you will see a column headed Group Products

Key Control A Cylinders (TX mechanism)

The information shown under this heading can help you identify which products can be Keyed Alike or Masterkeyed. The products that can be B Window Locks (large hex key mechanism) keyed to work with other products are given a group code. It works in the following way: C Window Locks (lever key mechanism) KA - means the product can be Keyed Alike with more of the same product. D Window Locks (tubular key mechanism)

MK - means the product can be Masterkeyed with more of the same product. E Window Locks and Security Door Fittings (spline key mechanism)

A GROUP LETTER (eg A) - means the product can be Keyed Alike or F Window Locks and Security Door Fittings (pin tumbler mechanism) Masterkeyed with more of the same product AND with other products listed in the same group. G Mortice Locks (Detainer mechanism) eg, a window lock in group E could be made to work from the same key as a security door fitting in group E. H Padlocks (Ava mechanism) The table shows an overview of the product keying groups; • TX

• 6 Pin

• Security Roses Cylinders

Cylinders Cylinders

Cylinders Index Introduction How to Specify Security Features

Chubb offers a very comprehensive range of Chubb have developed a series of icons to enable 1 • Introduction C2 cylinders to suit most applications. They are the process of product specification to be Protected Section available in the most common styles to enable the simplified. Products are available as an option on a • BSEN103 Classification C3 patented key section. customer to utilise their existing ironmongery. From today you can specifically detail your 2 • Features and Functions C3 The patent protection on the new TX system will requirements for a product, therefore ensuring that help secure your system from illicit key duplication, it includes particular security features. Drill Resistant • Photo Gallery C4 and is available with the new Fast Response Centre Hardened protection against drill attack. Example: If you require a cylinder that is Drill Service Support. • Range Table C5 Resistant look for the Drill icon (2) in the range 3 For the most comprehensive and flexible range of table. Saw Resistant cylinders, Chubb has the solution. • Euro Profile Cylinders C6 Hardened protection against saw attack. Chubb, Simplifying the Specification Process. Single Cylinders 4 Chubb is accredited with and meets the Force Resistant Double Cylinders requirements of BS EN ISO 9001: 1994. Built in strength against force attack.

Turn & Key Cylinders Standards & Approvals 5 Pick Resistant • Oval Profile Cylinders C7 Keying Groups Built in protection to resist picking. Single Cylinders These pan-European standards classify 6 Throughout the catalogue you will see a column products into grades on a series of Torque Resistant Double Cylinders headed. exacting tests. Built in strength against torque attack. Key Control Turn & Key Cylinders 7 The information shown under this heading can Rim Cylinders C8 The Association of British Insurers Tamper Resistant • help you identify which products can be Keyed Built in protection against Tampering. Alike or Masterkeyed. provides minimum security • Mortice Screw in Cylinders C8 recommendations for external doors and The products that can be keyed to work with other windows. 8 products are given a group code. Corrosion Resistant • Scandanavian Cylinders C9 Products conform to appropriate KA - means the product can be Keyed Alike with anti-corrosion requirements. Inner Cylinder more of the same product. 9 MK - means the product can be Masterkeyed with Fire Resistant Outer Cylinder more of the same product. Products conform to appropriate fire test A Group Letter (eg A) means the product can be requirements. • Security Escutcheons C9 Keyed Alike or Masterkeyed with more of the same 10 product and with other products listed in the same Escape group. Products for use on an escape door. For the complete range of products and their Note: We have made every effort to ensure that at keying groups, see the chart in the introduction 11 the time of going to print all information shown in section. Key Control this catalogue is correct. However, in our efforts to The products can be included in a key continually improve our products and offer only the control system. highest levels of security and quality we reserve the right to make alterations to the product 12 specifications shown in this catalogue. All Keys Guarantee dimensions provided within this catalogue are Products are guaranteed for a period of approximate and for guidance only. 2 keys are supplied as standard, however see the time. price list for any variations.

C2 Cylinders

BSEN1303 Classification Features and Functions

This standard classifies cylinders using a 7 digit coding system. Products meet the Protected Section Each digit refers to a particular feature of the product measured against the standard’s minimum ABI security Available on a patented key section. performance requirements. recommendations. Digit 1 - Category of use - grade 1: Suitable for use at extremes of temperature Drill Resistant Hardened Steel Inserts in the - 20˚C to +80˚C. Products have been cylinder body and plug. Digit 2 - Durability - grade 4: 25 000 cycles completed. tested to EN1303 Force Resistant - grade 5: 50 000 cycles completed. and graded. Security roses or correct length - grade 6: 100 000 cycles completed. cylinders prevent force attacks. Digit 3 - Door mass No requirement. Pick Resistant Digit 4 - Fire resistance - grade 0: No requirement. Mushroom pins in the cylinder - grade 1: Cylinders shall be fire tested in accordance inhibiting picking. with current fire test requirements of prEN 1634-1. Torque Resistant Side lugs, security roses or correct Digit 5 - Safety No requirement. length cylinders prevent twisting. Digit 6 - Corrosion resistance - grade 0: No requirement. - grade 1: Conforms to grade 3 of BS EN 1670 Corrosion Resistant Products have successfully as a minimum. completed an anti-corrosion test. Digit 7 - Security Cylinders will be classified in grades 1 to 5, where 5 is the highest. The grade of security can differ from one Key Systems Key Control Cylinders using the same key side of a double cylinder to the other. systems can be supplied Grades Keyed Alike, or Masterkeyed. 123 45 Guarantee Min. no. of effective differs 100 300 15 000 30 000 100 000 Guarantee period applicable Min. no. of movable pins 2 3 5 6 6 when used with original Chubb Direct coding on key YES YES NO NO NO keys and maintenance instructions followed. Max. net drill time (mins.) - - - 3 5 Total drill test time (mins) - - - 5 10 Chisel attack resistance (No. of blows) - - - 30 40 TX * Newly patented High Cylinder extraction resistance - - - 15kN 15kN Security locking Reversible key *Cylinder torque resistance (Nm) 2.5 5 15 20 30 system. The system The TX key can be Example operates on 3 rows inserted into the The following marking denotes a cylinder meeting the of pins totalling 10 6 PIN cylinder either way up 16-0-14 required category of use, durability grade 6 (100 000 cycles) pins in all. The 2 Convenient system and still operate. with no fire resistance requirement, grade 1 corrosion resistance and grade 4 security. sensor pins in the for general cylinder interact with applications. * Note: To gain chisel or torque sensor pins in the System operates on Security Rose resitance it is important that either, 1 2 key. The key is a flat a row of six lateral Number of Keys (1) the correct length of cylinder dimple type key. pins. 2 keys are supplied as is used to be flush with the door/ standard, however see handle face OR (2) a high security the price list for any rose is used to cover any variations. Finishes: Brass Satin Nickel cylinder protrusion.

Ideal for Use with: Rim Locks, Mortice Locks, Access Control, Panic Hardware, Multipoint Locks. ▼

C3 Cylinders

Euro Profile Cylinders Rim Cylinders

Page Page Page Page TXES C6 TXED C6 TXET C6 TXR C8

Oval Profile Cylinders Rim Cylinders

Page Page Page Page TXOS C7 TXOD C7 TXOT C7 4LC C8

Screw In Cylinders Scandinavian Oval Cylinders Security Roses

Page Page Page Page Page TXTC C8 TXSCI C9 TXSCO C9 3C14E & 3CE C9 3C13CE C9

C4 Security Features

Standards Key Systems Features & Functions Finish Options Cylinders TX 6 Pin Std. Cam Reversible Satin Pick Key Brass Drill Force Torque Position Key Nickel ProtectedSection Corrosion Control ProtectedSection Resistant Resistant Resistant Resistant Resistant Guarantee Euro Profile Cylinders

TXES3010 Euro Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXES3510 Euro Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXES4010 Euro Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXES4510 Euro Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXED3030 Euro Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXED3535 Euro Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXED4040 Euro Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXED4545 Euro Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXET3030 Euro Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXET3535 Euro Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXET4040 Euro Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXET4545 Euro Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●●

Oval Profile Cylinders

TXOS3010 Oval Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOS3510 Oval Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOS4010 Oval Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOS4510 Oval Profile Single Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOD3030 Oval Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOD3535 Oval Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOD4040 Oval Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOD4545 Oval Profile Double Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOT3030 Oval Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOT3535 Oval Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOT4040 Oval Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●● TXOT4545 Oval Profile Turn & Key Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● 25° ● ●●

Rim Cylinders

TXR Rim Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● ● ●● 4LC Rim Cylinder 1 6 - 0 - 1 3 ●●●KA 10 ● ●

Mortice Screw-in Cylinders

TXTC Screw In Cylinder ● 1 6 - 0 - 1 5 ●●●●●●A10 ● ● ●●

Scandinavian Oval Cylinders

TXSCI25 Scandanavian Oval Cylinder Inner ● 1 6 - 0 - 1 5 ●●●●●●A10 ● ● ●● TXSCO25 Scandanavian Oval Cylinder Outer ● 1 6 - 0 - 1 5 ●●●●●●A10 ● ● ●● TXSCI30 Scandanavian Oval Cylinder Inner ● 1 6 - 0 - 1 5 ●●●●●●A10 ● ● ●● TXSCO30 Scandanavian Oval Cylinder Outer ● 1 6 - 0 - 1 5 ●●●●●●A10 ● ● ●●

C5 Cylinders

Euro Profile Single Cylinders TXES TXED TXET TXES Standards

• For use with Euro profile lock cases. LIST LENGTH LENGTH LENGTH ●●● • Gives key access from one side of a door. No. A B C TXES3010 30 10 40 B A 17 16-0-15 16-0-15 16-0-15 TXES3510 35 10 45 TXES4010 40 10 50 Security Features TXES4510 45 10 55

33 Protected ● ● ● Section

C Drill ● ● ● Resistant

Force ● ● ● Euro Profile Double Cylinders Resistant TXED Pick ● ● ● Resistant • For use with Euro profile lock cases. LIST LENGTH LENGTH LENGTH No. A B C • Gives key access from both sides of a door. Torque TXED3030 30 30 60 ● ● ● A B 17 Resistant TXED3535 35 35 70 TXED4040 40 40 80 Corrosion ● ● ● TXED4545 45 45 90 Resistant 33 Key Control A A A

C Guarantee 10 10 10

Euro Profile Key & Turn Cylinders Key Systems TXET TX ●●●

6 Pin • For use with Euro profile lock cases. LIST LENGTH LENGTH LENGTH No. A B C • Gives key access from one side of a door and thumbturn operation from the other. Features & Functions • Turn suitable for people with Impaired Mobility. TXET3030 30 30 60 A B 17 TXET3535 35 35 70 Std. Cam Position 25˚ 25˚ 25˚ TXET4040 40 40 80 TXET4545 45 45 90 Reversible Key ●●● Finish Options 33 Brass ●●●

C Satin Nickel ●●●

C6 Cylinders

Oval Profile Single Cylinders TXOS TXOD TXOT TXOS Standards

• For use with Oval profile lock cases. LIST LENGTH LENGTH LENGTH ●●● No. A B C • Gives key access from one side of a door. TXOS3010 30 10 40 16-0-15 16-0-15 16-0-15 BA 17.6 TXOS3510 35 10 45 TXOS4010 40 10 50 Security Features TXOS4510 45 10 55

31.6 Protected ● ● ● Section

C Drill ● ● ● Resistant

Force ● ● ● Oval Profile Double Cylinders Resistant TXOD Pick ● ● ● Resistant • For use with Oval profile lock cases. LIST LENGTH LENGTH LENGTH No. A B C • Gives key access from both sides of a door. Torque ● ● ● TXOD3030 30 30 60 Resistant 17.6 AB TXOD3535 35 35 70 TXOD4040 40 40 80 Corrosion ● ● ● TXOD4545 45 45 90 Resistant

31.6 Key Control A A A

C Guarantee 10 10 10

Oval Profile Key & Turn Cylinders Key Systems TXOT TX ●●●

6 Pin • For use with Oval profile lock cases. LIST LENGTH LENGTH LENGTH No. A B C • Gives key access from one side of a door and thumbturn operation from the other. Features & Functions TXOT3030 30 30 60 • Turn suitable for people with Impaired Mobility. A B 17.6 TXOT3535 35 35 70 Std. Cam Position 25˚ 25˚ 25˚ TXOT4040 40 40 80 TXOT4545 45 45 90 Reversible Key ●●● Finish Options 31.6 Brass ●●●

C Satin Nickel ●●●

C7 Cylinders

Rim Cylinders TXR 4LC TXTC TXR Standards

• For use with surface mounted locks operating from a tailbar. ●●● • Provide key access from one side of a door. • Suitable for doors from 38mm to 57mm in thickness. 16-0-15 16-0-13 16-0-15 71mm 32mm

Security Features

32mm Ø Protected ● ● Section

Drill ● ● Resistant

Force ● ● Rim Cylinders Resistant 4LC Pick ● ● ● Resistant • For use with surface mounted locks operating from a tailbar. • Provide key access from one side of a door. Torque ● ● ● Resistant • Suitable for doors from 38mm to 57mm in thickness. 47.5mm 32mm

Corrosion ● ● ● Resistant

46mm Ø Key Control A KA A

Guarantee 10 10 10

Mortice Screw in Cylinders Key Systems TXTC TX ●●

6 Pin ● • For use with American stile or narrow stile mortice locks operating from a 29mm threaded cylinder. Features & Functions • Provide key access from one side of a door. Std. Cam Position

Reversible Key ●●

29mm Ø Barrel 32mm Ø Finish Options

Brass ●●● 32mm Satin Nickel ●●

C8 Cylinders

Scandinavian Oval Cylinders TXSCI TXSCO TXSCI Standards

●● • For use with Scandinavian oval profile lock cases. LIST LENGTH • Provides key access from the inside of a door. No. A Bolt through fixings. TXSCI25 25 • A 20 16-0-15 16-0-15 TXSCI30 30 Security Features

Protected ● ● 35 Section

Drill ● ● Resistant

Force ● ● Scandinavian Oval Cylinders Resistant TXSCO Pick ● ● Resistant • For use with Scandinavian oval profile lock cases. LIST LENGTH Provides key access from the outside of the door. No. A • Torque ● ● TXSC025 25 Resistant • Bolt through fixings. A 20 TXSC030 30

Corrosion ● ● Resistant

35 Key Control A A

Guarantee 10 10

High Security Cylinder Escutcheons Key Systems 3C14E • 3CE 3C13CE TX ●●

13mm 6 Pin • For use with Euro profile cylinders. 3C14E • For use with Euro profile cylinders.

• Helps prevent against Torque and Force attacks. 51mm • Helps prevent against Torque and Force attacks. Features & Functions • Brass or Satin Finish. • Brass or Satin Finish. • Bolt through fixing. • Bolt through fixing. Std. Cam Position 38mm • Escutcheon covers cylinder for extra protection. Reversible Key ●● 10mm 7mm 3CE Finish Options

54mm 62.5 46mm mm Brass ●●

3C14E 3CE 38mm Satin Nickel ●● 13.5mm

C9 Cylinders

Notes

C10 • Lever Mortice

• Cylinder Mortice

• Architectural Mortice

• Rebate Sets

• Latches

• Key Blanks Mortice Locks

Mortice Locks Mortice Locks

Mortice Locks Index Introduction How to Specify Security Features

The Chubb name has been synonymous with Chubb have developed a series of icons to enable 1 • Introduction M2 mortice locks for over one hundred and seventy five the process of product specification to be Protected Section Products are available as an option on a • Features and Functions M3 years. simplified. patented key section.

Lever Mortice Locks High Today Chubb offer a comprehensive range for both From today you can specifically detail your 2 Security Range architectural specification and residential use. requirements for a product, therefore ensuring that it includes particular security features. Drill Resistant • Photo Gallery M4 These include lever, detainer and cylinder locks, Hardened protection against drill attack. some kitemarked to BS3621 for use on external Example: If you require a mortice lock that has • Range Table M5 doors as well as standard variants for internal and hardened protection against drill attack, look for 3 general purpose doors. the Drill Resistant icon (number 2) in the range Saw Resistant • Range Details M6 - 9 table. Hardened protection against saw attack. • Rebate Sets M9 Chubb is accredited with and meets the Chubb, Simplifying the Specification Process. 4 Lever Mortice Locks requirements of BS EN ISO 9001: 1994 Force Resistant Security Range Built in strength against force attack. • Photo Gallery M10 Standards & Approvals 5 • Range Table M11 Pick Resistant Keying Groups Built in protection to resist picking. • Range Details M12 - 15 Products endorsed with the Kitemark have passed a strict testing procedure under the • Rebate Sets M15 Throughout the catalogue you will see a column control of the British Standards Institution. 6 headed. Torque Resistant Cylinder Mortice Locks Key Control The Master Locksmiths Association provides Built in strength against torque attack. guidelines covering minimum security levels • Photo Gallery M16 7 The information shown under this heading can for domestic properties. • Range Table M16 help you identify which products can be Keyed Tamper Resistant Alike or Masterkeyed. Built in protection against Tampering. • Range Details M17 - 18 The Association of British Insurers provides The products that can be keyed to work with other minimum security recommendations for 8 • Rebate Sets M18 products are given a group code. external doors and windows. Corrosion Resistant KA - means the product can be Keyed Alike with Products conform to appropriate Architectural Mortice Locks more of the same product. The National House Building Council offers anti-corrosion requirements. general guidance on security for dwellings, Photo Gallery M19 • MK - means the product can be Masterkeyed with flats and maisonettes. 9 more of the same product. Fire Resistant • Range Table M19 Products conform to appropriate fire test A Group Letter (eg A) means the product can be requirements. • Range Details M20 - 22 Keyed Alike or Masterkeyed with more of the same product and with other products listed in the same 10 Security Roses M23 group. Patented Key Systems Escape Products for use on an escape door. Notes Page M23 For the complete range of products and their Due to recent changes to UK copyright laws, the best way keying groups, see the chart in the introduction to prevent illicit copying of keys is to use a patented system. Note: We have made every effort to ensure that at 11 the time of going to print all information shown in section. A selected number of Chubb Mortice Key Control this catalogue is correct. However, in our efforts to Locks are available on a restricted key The products can be included in a key continually improve our products and offer only the system. Additional keys are only available control system. highest levels of security and quality we reserve the through authorised Chubb RKS centres. right to make alterations to the product 12 specifications shown in this catalogue. All Keys Chubb TX: The Chubb cylinder mortice lock cases can be Guarantee dimensions provided within this catalogue are used with the Chubb TX patented cylinder system, (see Products are guaranteed for a period of 2 keys are supplied as standard, however see the time. approximate and for guidance only. Cylinder Catalogue). price list for any variations. Mortice Locks

What Type of Door ? Features and Functions

• A comprehensive range of locks for both exterior Locking Mechanism = Easy Reversible Latch and interior glass panelled or solid timber doors. the means by which the door is held closed ● BS3621 L DB G Thief Resistant Locks. T Latch Deadbolt Recommended by the Police and the Insurance Door Types Bolt Through Fixing Companies DL/L HB T Solid Timber ● Deadlocking Hookbolt Handles Latch G Glass Panelled ▲ Security Rose R Rollerbolt Protected Section Available on a patented key section.

Drill Resistant What is Backset? Selected hardened or tough materials to resist drill attack.

• This is the measurement from Saw Resistant the edge of the door to the Hardened steel bolt, plates or centre of the keyhole. hardened rollers. Deadlocking Force Resistant • Locks with different backsets Locking the bolt so that Box Strike to protect the bolts. are available depending upon it cannot be forced back. application. Pick Resistant Automatic Locking mechanism incorporates (every time the pick resistant device(s). door is closed it is Edge deadlocked) Escape Backset of door A single action withdraws all the bolts simultaneously

Key Key Control (external operation) Products are Masterkeyble (MK) What are Centres? or able to be Keyed Alike (KA).

Key Operating Mechanism= Guarantee • This is the measurement from (internal operation) Guarantee period applicable The means by which the lock is operated the centre of the ‘follower’, when used with original Chubb Keys and maintenance which operates the handles, to Thumbturn Lever or Detainer Cylinder instructions followed. the centre of the keyhole. • In the UK this is commonly Centres 57mm, although other sizes are available. Finishes: Brass Satin *All locks are supplied complete with minimum of two keys as standard.

Ideal for Use with: Cylinder Rimlocks & Access Control Systems ▼ Lever Mortice: High Security Range

Detainer 7 Lever

Page Page Page Page Page Page 3G135 M6 3G110 M6 3G117 M6 3G227 M6 3K77 M7 3K277 M7

5 Lever

Page Page Page Page Page 3G114E3G114 M87 3K74E3K74 M87 3U114 M8 3U74 M8 3G220 M9

M4 Security Features

Security Features Door Specification Case Finishes

Lever Mortice Locks Locking Bolt Easily Deadlocking Case Back Centres Pick Key Drill Saw Force Brass Satin Other Escape Mechanism Through Rev. Internal External Size Set ProtectedSection Control ProtectedSection Resistant Resistant Resistant Resistant Guarantee Fixings Latch Security Detainer

3G135 15 DB n/a Key Key 73mm 44mm n/a

Security Detainer

3G110 G15 DB n/a Key Key 73mm 44mm n/a

BS3621

7 Lever

3G117 KA 15 DB n/a Key Key 67mm 40mm n/a

BS3621

3G227 KA 15 DB n/a Key Key 67mm 40mm n/a

BS3621

3K77 KA 15 R/DB Roller Key Key 67mm 40mm 57mm

BS3621

3K277 KA 15 L/DB Roller Key Key 67mm 40mm 57mm

BS3621

Security 5 Lever

3G114 O KA 15 DB n/a Key Key 67/80mm 40/53mm n/a

BS3621

3K74 O KA 15 R/DB Roller Key Key 67/80mm 40/53mm 57mm

BS3621

3U114 KA 15 DB n/a Key Key 67/80mm 44/57mm n/a

BS3621

3U74 KA 15 L/DB Key Key 67/80mm 44/57mm n/a

BS3621

3G220 KA 15 DB n/a Key Key 54mm 36mm n/a

BS3621

Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, DB = Deadbolt, L = Latch Bolt Through Fixings - = Handles MK = Masterkeyable KA = Keyed Alike Only G = Masterkey Grouping

M5 Lever Mortice: High Security Range

Detainer 3G135 3G110 3G117 3G227 3G135 Deadlock 3G110 Deadlock Security Features

Protected • Key operation from both sides of the door. • Kitemarked to BS3621. Recommended by insurance Section O • 74,000 key variations. Extra keys only available companies and the police. direct from Chubb. • Key operation from both sides of the door. Drill BS3621: 1980 Resistant • Available on patented Chubb RKS system. • Master keyable with other detainer locks.

• Can be supplied with microswitches for alarm systems. Saw Resistant 25mm 29mm • Available on patented Chubb RKS system.

73mm 25mm 29mm Force 73mm Resistant 14mm

14mm Pick Resistant

122mm 178mm 178mm Escape

14mm 122mm 178mm 178mm Escape 14mm Key G G KA KA Control 19mm 44mm 15 15 15 15

19mm Guarantee 44mm

Security Features

7 Lever Locking Mechanism DB DB DB DB

3G117 Deadlock 3G227 Deadlock Bolt Through Fixings

• Kitemarked to BS3621. Recommended by insurance • Kitemarked to BS3621. Recommended by insurance Deadlocking Internal Key Key Key Key companies and the police. companies and the police. Deadlocking External Key Key Key Key • Key operation from both sides of the door. BS3621: 1980 • Key operation from both sides of the door. BS3621: 1980 • 7 lever mechanism generating in excess of 6000 key variations. • 7 lever mechanism generating in excess of 6000 key variations. Door Specification • Extra long deadbolt with 20mm throw. 29mm 29mm 25mm Case Size (mm) 73 73 67 67 25mm 67mm 67mm Backset (mm) 44 44 40 40 20mm 14mm Centres (mm) n/a n/a n/a n/a 152mm 76mm 133mm 76mm 200mm 178mm Case Finishes 14mm 14mm Brass 19mm 19mm 40mm 40mm Satin

Other

M6 Lever Mortice: High Security Range

7 Lever 3K77 3K277 3K77 Sashlock 3K277 Sashlock Security Features

Kitemarked to BS3621. Recommended by insurance Kitemarked to BS3621. Recommended by insurance Protected • • Section companies and the police. companies and the police.

• Key and handle operation from both sides of the door. • Key and handle operation from both sides of the door. Drill BS3621: 1980 BS3621: 1980 Resistant • 7 lever mechanism generating in excess of 6000 • 7 lever mechanism generating in excess of 6000 key variations. key variations. • Extra long deadbolt with 20mm throw. Saw Resistant • Bolt through fixings. • Easily reversible latchbolt. 29mm 25mm 29mm 25mm 67mm 67/80mm Force 159mm Resistant 159mm

108mm Pick Resistant

152mm 57mm 108mm 153mm 159mm Escape 57mm Escape 12mm 14mm Key KA KA Control 20mm 18mm 40mm Guarantee 15 15 40/53mm

Security Features

5 Lever Locking Mechanism R/DB L/DB

3G114E Deadlock NEW 3K74E Mortice Lock NEW Bolt Through Fixings

• Kitemarked to BS3621. Recommended by insurance • Kitemarked to BS3621. Recommended by insurance Deadlocking Internal Key Key companies and the police. companies and the police. • Key operation from both sides of the door. • Key and handle operation from both sides of the door. Deadlocking External Key Key BS3621: 1980 BS3621: 1980 • Can be supplied to pass and are available with either • Can be supplied to pass and are available with either single or double pole microswitch. single or double pole microswitch. Door Specification • Available on patented Chubb RKS System. RKS • Available on patented Chubb RKS System. RKS • Extra long deadbolt with 20mm throw. • Extra long deadbolt with 20mm throw. Case Size (mm) 67 67/80

Backset (mm) 40 40

Centres (mm) 57 57

Case Finishes

Brass

Satin

Other

M7 Lever Mortice: High Security Range

5 Lever 3G114 3K74 3U114 3U74

3G114 Deadlock 3K74 Sashlock Security Features • Kitemarked to BS3621. Recommended by insurance • Kitemarked to BS3621. Recommended by insurance Protected O O companies and the police. companies and the police. Section • Key operation from both sides of the door. BS3621: 1980 • Key and handle operation from both sides of the door. BS3621: 1980 Drill ● ● ● ● • Can be supplied to pass and is available with • Can be supplied to pass. Available with Resistant either single or double pole microswitch. either single or double pole microswitch. Saw ● ● ● ● • Available on patented Chubb RKS System. • Available on patented Chubb RKS System. Resistant 29mm 25mm 29mm 25mm Force ● ● ● ● Resistant 67/80mm 67/80mm

Pick ● ● ● ● 14mm Resistant

77mm 133mm 178mm Escape 57mm 153mm 159mm

108mm Key KA KA KA KA Control 14mm

40/53mm Guarantee 15 15 15 15 40/53mm

Security Features

5 Lever Locking Mechanism DB R/DB DB L/DB 3U114 Deadlock 3U74 Sashlock Bolt Through Fixings ● • Kitemarked to BS3621. Recommended by Insurance • Kitemarked to BS3621. Recommended by Insurance companies and the police. companies and the police. Deadlocking Internal Key Key Key Key • Key operation from both sides of the door. • Key and handle operation from both sides of the door. BS3621: 1980 BS3621: 1980 Deadlocking External Key Key Key Key • Ideal as an upgrade lock as it will replace most • Ideal as an upgrade lock as it will replace most other lever mortice deadlocks with the minimum other lever mortice sashlocks with the minimum Door Specification of carpentry. of carpentry. 30mm 25mm Case Size (mm) 67/80 67/80 67/80 67/80 30mm 67/80mm 25mm 67/80mm Backset (mm) 40/53 40/53 44/57 44/57

108mm 15mm Centres (mm) n/a 57 n/a 57 15mm 177mm 200mm 70mm 145mm 160mm 57mm Case Finishes

Brass ● ● ● ●

Satin ● ● ● ●

44/57mm 44/57mm Other Lever Mortice: High Security Range

5 Lever 3G220 3G220 Deadlock Security Features

Kitemarked to BS3621. 25mm 28mm Protected • 54mm Section Recommended by insurance companies and the police. Drill ● 20mm Resistant • Key operation from both sides of the door. BS3621: 1980 • Narrow stile is particularly suited to doors Saw ● where the width is restricted, eg french doors. Resistant 131mm 180mm 178mm • Extra long deadbolt with 20mm throw. Force ● Resistant

Pick ● 18mm Resistant

36mm Escape

Key KA Control Rebate Sets Guarantee 15

Security Features • Different size rebate sets are available to suit the range of Chubb Lever Mortice Locks. • Available in either satin or brass finish. Locking Mechanism DB

Bolt Through Fixings

Deadlocking Internal Key

Deadlocking External Key

Door Specification

Case Size (mm) 54

Backset (mm) 36 • Only suitable for • Only suitable for • Only suitable for • Only suitable for • Only suitable for 3G135 & 3G110. 3G277. 3U114. 3U74 3G220 Centres (mm) n/a

• Details of Rebate sets for 3G117, 3K77, 3G114, & 3K74 are included on page M15. Case Finishes Size 3G135 3G110 3G117 3G227 3K77 3U277 3G114 3K74 3U114 3U74 3G220 Brass ● 13mm ✔ ✔ ✔ ✔ ✔ - ✔ ✔ ✔ ✔ ✔ 19mm ✔ ✔ ✔ - ✔ - ✔ ✔ ✔ ✔ - Satin ● 25mm ✔ ✔ ✔ - ✔ - ✔ ✔ ✔ ✔ - Other Lever Mortice: Security Range

Detainer

Page Page Page Page Page Page 3R35 M12 3R35X M12 3J60 M12 3K70 M12 3M50 M13 3M51 M13

5 Lever For Internal Doors NEW

Page Page Page Page Page Page Page 3G115 M13 3K75 M13 3U115 M14 3U75 M14 3U177 M14 3U277 M14 3U677 M15

M10 Security Features

Security Features Door Specification Case Finishes

Lever Mortice Locks Locking Bolt Easily Deadlocking 20mm Case Back Centres Other Pick Key Brass Satin Drill Saw Force Mechanism Through Rev. Internal External Throw Size Set Escape ProtectedSection Control ProtectedSection Resistant Resistant Resistant Resistant Guarantee Fixings Latch Deadbolt Detainer

3R35 O G10 D/L L Auto Auto 80mm 50mm 56mm

3R35X G10 D/L L Auto Auto 80mm 50mm 56mm

3J60 O G10 L, DB Key Key 165mm 83mm n/a

3K70 O G10 L, DB Key Key 73mm 44mm 56mm

Sim 3M50 O G10 Hookbolt Key Key 70mm 43mm n/a Brass

Sim 3M51 O G10 Hookbolt Key Key 70mm 43mm 56mm Brass

5 Lever

3G115 KA 10 DB n/a Key Key 67/80mm 40/53mm n/a

3K75 KA 10 R, DB Roller Key Key 67/80mm 40/53mm 57mm

3U115 KA 10 DB n/a Key Key 67/80mm 44/57mm n/a

3U75 KA 10 L, DB Key Key 67/80mm 44/57mm 57mm

3 Lever

3U177 NEW KA 10 DB n/a Key Key 65/77mm 44/57mm n/a

3U277 NEW KA 10 L, DB Key Key 65/77mm 44/57mm 57mm

3U677 NEW 10 L 65/77mm 44/57mm n/a

Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, D/LL = Deadlocking Latch, DB = Deadbolt, L = Latch Bolt Through Fixings - = Handles KA = Keyed Alike Only G = Master Keyed Grouping Finish - Sim Brass = Simulated Brass M11 Lever Mortice: Security Range

Detainer 3R35 3R35X 3J60 3K70 3R35/3R35X Deadlocking Latch Security Features

Protected • 5 Detainer mortice deadlocking latch suitable for external wooden doors where slam action is required. Section O O • The door is secured by an automatic deadlocking action, whilst the snib can be used to hold back when the door needs to be left ajar. Drill • Operating handle on the inside can be secured by key from either side. Also increases security of deadlocking. Resistant

• Masterkeyable with other detainer locks. 25mm 80mm 29mm Saw ● ● • Can be modified for use as a fire escape lock (3R35X) Resistant by inhibiting the facility to lock the handle. 10 • Key operation from both sides, handle from either side, Force ● ● ● ● Resistant • Handle fitted to one side only (inside) 3R35X. 38 Pick ● ● ● ● 15 178mm Resistant 56

200mm Escape ● 148mm

19 Key G G G G Control 44mm

Guarantee 10 10 10 10

Security Features

Detainer Locking Mechanism DL/L DL/L L/DB L/DB

3J60 Horizontal 2-bolt Lock 3K70 Sashlock Bolt Through Fixings

• 5 Detainer Horizontal • 5 Detainer mortice lock combining a key operated deadlocking Deadlocking Internal Auto Auto Key Key mortice lock for main action with the facility for using handles. entrance or inter- • Key and handle operation from both sides of the door. Deadlocking External Auto Auto Key Key communicating doors • Masterkeyable with other detainer locks. where door knobs are Door Specification preferred and a key 25mm operated deadlocking 73mm 29mm action is required. Case Size (mm) 80 80 165 73 • Key and handle/knob Backset (mm) 50 50 83 44 operation from both sides 200mm of the door. 29mm Centres (mm) 56 56 n/a 56 • Masterkeyable with 165mm 56 other detainer locks. 14mm 178mm 148mm 14mm Case Finishes

98mm 143 Brass ● ● ● 15 178mm 19 Satin 19 ● ● ● ● 44mm 67mm 83mm Other Lever Mortice: Security Range

Detainer 3M50 3M51 3G115 3K75 3M50 Hook Bolt 3M51 Clutch Bolt Security Features

Protected • 5 Detainer mortice lock for sliding or hinged doors. • 5 Detainer mortice lock which is suitable for sliding doors requiring Section • The hook bolt clutches the lock to the door frame, whilst a an automatic closing action. ‘steady’ bolt prevents the door being lifted to release the hook. • Handles can be fitted to one or both sides and the key can be used Drill Resistant • Key operation from both sides of the door. on either side to secure both the bolt and handle(s) & release hook. • A projecting stump on the forend engages into the locking plate to • Masterkeyable with other detainer locks. Saw prevent the door being lifted from the frame in the closed position. Resistant • Available on patented Chubb RKS system. 29mm 25mm • Bolt through fixing also provided. 70mm Force • Masterkeyable with other detainer locks. Resistant 25mm • Available on 29mm 15mm 70mm patented Chubb Pick RKS system. Resistant 178mm

144mm 225mm Escape 225mm 144mm 178mm Escape 15 Key G G Control

Guarantee 10 10 10 10 43mm 43mm Security Features

5 Lever Locking Mechanism Hookbolt Hookbolt DB R, DB

3G115 Deadlock 3K75 Sashlock Bolt Through Fixings

• 5 Lever mechanism suitable for use on external doors. • 5 Lever mechanism suitable for use on external doors. Deadlocking Internal Key Key Key Key • Key operation from both sides of the door. • Key and handle operation from both sides of the door. Deadlocking External Key Key Key Key 29mm 25mm 30mm

25mm 67/80mm Door Specification 67/80mm Case Size (mm) 70 70 67/80 67/80

Backset (mm) 43 43 40/53 40/53 77mm 133mm 178mm 108mm 153mm 159mm Centres (mm) n/a 57 n/a 57 14mm 14mm Case Finishes

40/53mm 40/53mm Brass

Satin

Other Sim. Brass Sim. Brass

M13 Lever Mortice: Security Range

5 Lever 3U115 3U75 3U177 3U277 3U115 Deadlock 3U75 Sashlock Security Features

5 Lever mechanism suitable for use on external doors. Protected • 5 Lever mechanism suitable for use on external doors. • Section • Key operation from both sides of the door. • Key and handle operation from both sides of the door. Drill • Ideal as an upgrade lock as it will replace most other lever • Ideal as an upgrade lock as it will replace most other lever Resistant mortice deadlocks with the minimum of carpentry. mortice sashlocks with the minimum of carpentry. Saw ● ● ● ● Resistant 25mm 30mm 25mm 30mm 67/80mm 67/80mm Force ● ● Resistant 14mm 108mm 14mm Pick 145mm 160mm Resistant 70mm 177mm 168mm 57mm Escape

Key 44/57mm Control 44/57mm

Guarantee 10 10 10 10

Security Features

3 Lever Locking Mechanism DB L, DB DB L, DB

3U177 Deadlock NEW 3U277 Sashlock NEW Bolt Through Fixings ● ●

• 3 Lever mechanism suitable for internal doors. • 3 Lever mechanism suitable for internal doors. Deadlocking Internal Key Key Key Key • Key operation from both sides of the door. • Key and handle operation from both sides of the door. • Ideal as an upgrade lock as it will replace most other 3 lever • Ideal as an upgrade lock as it will replace most other 3 lever Deadlocking External Key Key Key Key mortice deadlocks with the minimum of carpentry. mortice Sashlocks with the minimum of carpentry. 30mm Door Specification 25mm 30mm 25mm 65/77mm 65/77mm Case Size (mm) 67/80 67/80 65/77 65/77

Backset (mm) 44/57 44/57 44/57 44/57 12.5mm 108mm

12.5mm Centres (mm) n/a 57 n/a 57 70mm 145mm 160mm 177mm 200mm 57mm Case Finishes

Brass ● ● ● ●

44/57mm 44/57mm Satin ● ● ● ●

Other Lever Mortice: Security Range

Rebate Sets

• Different size rebate sets are available to suit the range of Chubb Lever Mortice Locks. • Available in either satin or brass finish.

• Only suitable for • Only suitable for • Only suitable for • Only suitable for • Only suitable for • Only suitable for • Only suitable for 3R35. 3J60. 3K70, 3C20. 3G114, 3G115, 3G117. 3K74, 3K75, 3K77. 3U115. 3U75.

Size 3R35 3R35X 3J60 3K70 3M50 3M51 3G115 3K75 3U115 3U75 3U177 3U277 13mm ✔ ✔ Satin only ✔ - - ✔ ✔ ✔ ✔ - - 19mm ✔ ✔ Satin only ✔ - - ✔ ✔ ✔ ✔ - - 25mm ✔ ✔ Satin only ✔ - - ✔ ✔ ✔ ✔ - -

3U677 Mortice Latch NEW Patented Key Systems

• Medium duty latch. A selected number of Chubb Mortice Locks are available on a restricted key system. • Handle operation from either side of the door. This offers extra protection against unauthorised key duplication. Additional keys are only available through authorised Chubb RKS Centres. • Suitable for use with unsprung handles. 25.5mm 65/77mm 16mm 24mm System Available on the following System Available on the following 11mm 3G114 ✔ 3R35 ✔ ✔ 57mm 3K74 70mm 120.5mm

System Available on the following 3K70 ✔

44/57mm Cylinder Mortice Locks

High Security Security Case Only

Page Page Page Page Page Page 3C14/C M17 3C24/C M17 3C14 M17 3C24 M17 3C10 M18 3C20 M18

Security Features

Security Features Door Specification Case Finishes

Cylinder Mortice Locks Locking Bolt Deadlocking Case Back Centres Other Pick Key Brass Satin Drill Saw Force Mechanism Through Internal External Size Set Escape ProtectedSection Control ProtectedSection Resistant Resistant Resistant Resistant Guarantee Fixings High Security

3C14/C 15 DB Key Key 67mm 40mm n/a

BS3621

3C24/C 15 L, DB Key Key 67mm 40mm 48mm BS3621

Security Case Only

3C14 n/a 15 DB Key/Turn Key 67mm 40mm n/a

3C24 n/a 15 L, DB Key/Turn Key 67mm 40mm 48mm

3C10 n/a 15 DB Key/Turn Key 73mm 44mm n/a

3C20 n/a 15 L, DB Key/Turn Key 73mm 44mm 53mm

Key: Protected Section - O = Optional Locking Mechanism - R = Rollerbolt, DB = Deadbolt, L = Latch Bolt Through Fixings - = Handles, = Security Rose M16 Cylinder Mortice Locks

High Security 3C14/C 3C24/C 3C14 3C24 3C14/C Deadlock 3C24/C Sashlock Security Features

Kitemarked to BS3621. Recommended by Insurance companies Kitemarked to BS3621. Recommended by Insurance companies Protected • • Section and the Police. and the Police.

• Key operation from both sides of the door. • Key and handle operation from both sides of the door. Drill • Supplied complete with security escutcheon and 6 pin euro • Easily reversible latchbolt. Resistant profile cylinder. • Supplied complete with security escutcheon and 6 pin euro Saw • Extra long deadbolt with 20mm throw. profile cylinder. Resistant 29mm • Case size 67mm only. 29mm • Extra long deadbolt with 20mm throw. 25mm 25mm Case size 67mm only. Force • 67mm Resistant 67mm

Pick n/a n/a Resistant 20mm 108mm 20mm 153mm 200mm 76mm 153mm 200mm 48mm Escape

Escape Key Control

40mm Guarantee 15 15 15 15 40mm

Security Features

Security Case Only Locking Mechanism DB L, DB DB L, DB

3C14 Deadlock 3C24 Sashlock Bolt Through Fixings

• Manufactured to the same high security specifications as the • Manufactured to the same high security specifications as the 3C24/C. Deadlocking Internal Key Key Key/Turn Key/Turn 3C14/C. • This heavy duty mortice lock case accommodates most euro • This heavy duty mortice deadlock case accommodates most profile cylinders. Deadlocking External Key Key Key Key euro profile cylinders. • Easily reversible latchbolt. • Extra long deadbolt with 20mm throw. • Extra long deadbolt with 20mm throw. Door Specification • Case size 67mm only. 29mm 29mm • Case size 67mm only. 25mm Case Size (mm) 67 67 67 67 25mm 67mm

67mm Backset (mm) 40 40 40 40

20mm 108mm Centres (mm) n/a 48 n/a 48 20mm 200mm Case Finishes 76mm 153mm 200mm 48mm 153mm Brass

Satin

40mm 40mm Other

M17 Cylinder Mortice Locks

Security Case Only 3C10 3C20 3C10 Deadlock 3C20 Sashlock Security Features

Protected • This heavy duty mortice deadlock case accommodates most • This heavy duty mortice deadlock case accommodates most Section O O euro profile cylinders. euro profile cylinders. • Suitable for hinged wooden doors of not less than 40mm thick. Suitable for hinged wooden doors where handle operation is Drill • Resistant • Two independently operated levers within the case control required. deadlocking of the bolt and will frustrate manipulation at the • 64mm (21/2”) and 76mm (3”) case sizes available. Saw ● ● locking mechanism by attempting to by-pass the cylinder. Resistant 29mm • Bolt through fixings. 29mm • Bolt through fixings. 25mm 73mm Force ● ● 25mm Resistant 73mm

Pick n/a n/a 14mm Resistant 148mm 178mm Escape 200mm 122mm 178mm 178mm 53mm 14mm Key Control

Guarantee 15 15

44mm 44mm Security Features

Rebate Sets Locking Mechanism DB L, DB

Bolt Through Fixings ● ●

• Different size rebate sets are available to suit the range of Chubb Lever Mortice Locks. Deadlocking Internal Key/Turn Key/Turn • Available in either satin or brass finish. Deadlocking External Key Key

Door Specification

Case Size (mm) 73 73

Backset (mm) 44 44

Centres (mm) n/a 53 • Only suitable for • Only suitable for • Only suitable for 3C14. 3C10. 3C20. Case Finishes

Size 3C14/C 3C24/C 3C14 3C24 3C10 3C20 Brass ● ● 13mm ✔ - ✔ - ✔ ✔ Satin ● ● 19mm - - - - ✔ ✔ 25mm - - - - ✔ ✔ Other Architectural Cylinder Mortice Locks

Architectural Case Only

Page Page Page Page Page Page Page Page C2422 M20 C2454 M20 C2420 M20 C2455 M20 C2465 M21 C2421 M21 C2486 M21 C2424 M21

Security Features

Security Features Door Specification Case Finishes

Mortice Locks Locking Bolt Deadlocking Case Back Centres Other Pick Key Brass Satin Drill Saw Force Mechanism Through Internal External Size Set Escape ProtectedSection Control ProtectedSection Resistant Resistant Resistant Resistant Guarantee Fixings Architectural Case

C2422 Sashlock O ●● 10 L, DB ●▲ Key/Turn Key 92mm 60mm 72mm St. Steel

C2454 Deadlock O ●● 10 DB ▲ Key/Turn Key 92mm 60mm St. Steel

C2420 Sashlock O 10 L, DB ●▲ Key/Turn Key 92mm 60mm 72mm St. Steel

C2455 Deadlock O 10 DB ▲ Key/Turn Key 92mm 60mm St. Steel

C2465 Latch O 10 L ● 92mm 60mm 72mm St. Steel

C2421 Deadlocking Latch O 10 DL/L ●▲ Auto Auto 92mm 60mm 72mm St. Steel

C2486 Bathroom Lock 10 L, DB ● Turn 92mm 60mm St. Steel

C2424 Escape Lock O ●●10 L, DB ●▲ Key/Turn Key 92mm 60mm 72mm St. Steel

Key: Protected Section - O = Optional Locking Mechanism - L = Latchbolt, DL/L = Deadlocking Latch, DB = Deadbolt Bolt Through Fixings - ● = Handles, ▲ = Security Rose Finish - St. Steel = Stainless Steel Architectural Cylinder Mortice Locks

Security Case Only C2422 C2454 C2420 C2455 C2422 Sashlock NEW C2454 Deadlock NEW Security Features

Protected • European size 72mm centres mortice lock case which • European size mortice lock case which accommodates most Section O O O O accommodates most euro-profile cylinders. europrofile cylinders.

• Key and handle operation from both sides of the door. • Key operation from both sides of the door. Drill ● ● Resistant Latchbolt operated by key. • Extra long deadbolt with 20mm throw. • Extra long deadbolt with 20mm throw. Saw ● ● • Easily reversible latchbolt. Resistant 24mm 92mm 24mm 18mm 24mm 22mm 92mm Force Resistant

20mm 165mm Pick 90mm Resistant 166mm 20mm 72mm 235mm 159mm 72mm Escape

Key Control 60mm

Guarantee 10 10 10 10 60mm

Security Features

Standard Case Only Locking Mechanism L, DB DB L, DB DB

C2420 Sashlock NEW C2455 Deadlock NEW Bolt Through Fixings ●▲ ▲ ●▲ ▲

• European size 72mm centres mortice lock case which • European size mortice lock case which accommodates most Deadlocking Internal Key/Turn Key/Turn Key/Turn Key/Turn accomodates most euro-profile cylinders. europrofile cylinders. • Key and handle operation from both sides of the door. • Key operation from both sides of the door. Deadlocking External Key Key Key Key Latchbolt operated by key. • 14mm throw deadbolt • 14mm throw deadbolt. Door Specification • Easily reversible latchbolt. 24mm 24mm 92mm Case Size (mm) 92 92 92 92 92mm 18mm 24mm Backset (mm) 60 60 60 60 22mm

165mm Centres (mm) 72 72 166mm 14mm 14mm 90mm 165mm 235mm Case Finishes 72mm 235mm

Brass

Satin

60mm 60mm Other St. Steel St. Steel St. Steel St. Steel Architectural Cylinder Mortice Locks

Standard Case Only C2465 C2421 C2486 C2424 C2465 Mortice Latch NEW C2421 Deadlocking Latch NEW Security Features

European size 72mm centres mortice lock case which European size 72mm centres mortice lock case which Protected • • Section O O O accomodates most euro-profile cylinders. accomodates most euro-profile cylinders. • Handle operation from both sides of the door. • Key and handle operation from both sides of the door. Drill • Easily reversible latchbolt. Latchbolt operated by key. Resistant • Autodeadlocking latch, everytime the door is closed it is locked. Saw ● 24mm • Easily reversible latchbolt. Resistant 92mm 24mm 18mm 24mm 92mm 18mm 24mm Force Resistant

165mm 79mm 165mm Pick 166mm Resistant 235mm 72mm 235mm ● 72mm Escape

Key Control

60mm Guarantee 10 10 10 10 60mm

Security Features

Standard Case Only Locking Mechanism L DL/L L, DB L, DB

C2486 Bathroom Lock NEW C2424 Escape Lock NEW Bolt Through Fixings ● ●▲ ● ●▲

• European size 72mm centres mortice lock case. • European size 72mm centres mortice lock case which Deadlocking Internal Auto Turn Key/Turn • Handle operation from both sides of the door. accommodates most euro-profile cylinders. • Easily reversible latchbolt. • Key and handle operation from both sides of the door. Deadlocking External Auto Key Latchbolt operated by key. • Extra long deadbolt with 20mm throw. Door Specification 24mm • Single action escape action. One downwards movement of the 92mm 18mm 24mm handle withdraws both the bolts simultaneously. Case Size (mm) 92 92 92 92 Easily reversible latchbolt. • 24mm 92mm 18mm 24mm Backset (mm) 60 60 60 60 165mm 166mm 14mm Centres (mm) 72 72 72 166mm 165mm 235mm 20mm Case Finishes 235mm 72mm Brass

Satin 60mm 60mm Other St. Steel St. Steel St. Steel St. Steel Cylinder Mortice Locks

Security Roses 3C14/E 3CE Keyblanks

• Ideal for use with euro-profile cylinder mortice lock cases. • The following chart provides details of the various mortice keyblanks available. 3C14E 10mm 3CE 10mm

Key Number Suitable For:

54mm 54mm K521 Detainer Range Mortice Locks K722 BS and Non BS Range Lever Mortice Locks K727 6 Pin Cylinder Range 3C14E RKS Blank 3G114, 3K74 38mm 38mm RKS Blank 3G110, 3R35, 3K70

Notes

M22 • High Security

• Double Security

• Drawback Lock

• Security Range

• Traditional Security Rim Locks

Rim Locks Rim Locks

Rim Locks Index Introduction How to Specify Security Features

Chubb offer a comprehensive range of cylinder rim Chubb have developed a series of icons to enable 1 • Introduction RL2 Protected Section locks which are ideal for both architectural the process of product specification to be Products are available as an option on a • What Type of Door ? RL3 application and residential use. simplified. patented key section.

From today you can specifically detail your 2 • What is Backset ? RL3 The range includes a high security variant, kitemarked to BS3621, for use on external doors, as requirements for a product, therefore ensuring that Drill Resistant • Features and Functions RL3 well as standard variants for internal doors or when it includes particular security features. Hardened protection against drill attack. used with a Chubb mortice deadlock on external Example: If you require a rimlock that has hardened 3 • Photo Gallery RL4 doors. protection against drill attack, look for the Drill Resistant icon (number 2) in the range table. Saw Resistant • Range Table RL5 Hardened protection against saw attack. Chubb, Simplifying the Specification Process. • High Security RL6 4 Chubb is accredited with and Force Resistant • Double Security RL6 meets the requirements of Built in strength against force attack. BS EN ISO 9001: 1994. • Drawback Lock RL7 5 Standards & Approvals Pick Resistant • Security RL7 Built in protection to resist picking.

• Traditional Security RL8 Products endorsed with the Kitemark 6 have passed a strict testing procedure under the control of the British Standards Torque Resistant • Replacement Cylinder RL8 Built in strength against torque attack. Keying Groups Institution. • Cylinder Pull RL8 BS3621 7 Throughout the catalogue you will see a column • Multi-Point RL9 Tamper Resistant headed. The Master Locksmiths Association Built in protection against Tampering. Key Control Notes Page RL10 provides guidelines covering minimum • 8 RL11 security levels for domestic properties. The information shown under this heading can Corrosion Resistant Products conform to appropriate help you identify which products can be Keyed anti-corrosion requirements. Alike or Masterkeyed. The Association of British Insurers 9 The products that can be keyed to work with other provides minimum security Fire Resistant products are given a group code. recommendations for external doors and Products conform to appropriate fire test requirements. KA - means the product can be Keyed Alike with windows. more of the same product. 10 Escape MK - means the product can be Masterkeyed with Products for use on an escape door. more of the same product. The National House Building Council offers general guidance on security for A Group Letter (eg A) means the product can be Note: We have made every effort to ensure that at dwellings, flats and maisonettes. 11 the time of going to print all information shown in Keyed Alike or Masterkeyed with more of the same Key Control this catalogue is correct. However, in our efforts to product and with other products listed in the same The products can be included in a key control system. continually improve our products and offer only the group. highest levels of security and quality we reserve the 12 right to make alterations to the product For the complete range of products and their specifications shown in this catalogue. All Keys Guarantee dimensions provided within this catalogue are keying groups, see the chart in the introduction Products are guaranteed for a period of approximate and for guidance only. section. At least 2 keys are supplied as standard, however see time. the price list for any variations.

RL2 Rim Locks

What Type of Door ? Features and Functions

• A comprehensive range of locks for both exterior Lockable Handle = Locking Mechanism = and interior glass panelled or solid timber doors. Prevents someone reaching in and the means by which the door is held closed opening the door DL/L MP T G ● BS3621 Deadlocking Multi-Point Internal handle Recommended by Latch (by turn of key in handle) the Police and the Door Types Insurance DB ▲ Companies T Solid Timber Deadbolt Key in outside G Glass Panelled cylinder L Latch

Protected Section Available on a patented key section. • Variants available for outward opening doors. Drill Resistant • Locks available to suit doors between 38mm and Hardened Steel Inserts in the 57mm thick. outside cylinder.

Saw Resistant Hardened steel bolt, plates or hardened rollers.

What is Backset? Force Resistant Meets the force requirements Deadlocking = • This is the measurement from the edge of the of BS3621. Locking the bolt so that door to the centre of the keyhole. Pick Resistant it cannot be forced back. Locking mechanism incorporates pick resistant device(s). Automatic (every time the door is Torque Resistant closed it is deadlocked) Side lugs restricting twisting of cylinder. Edge Key of (by a reverse turn of the key Tamper Resistant door Concealed fixings when door is in the outside cylinder) Bolt Hold Back closed. Snib Internal Either a slide, push button Key Control Backset (Internal Can be Masterkeyed or Keyed Key or turn of pull back handle snib button) to hold the bolt in the case. Alike (KA). • Locks are commonly supplied with either a Guarantee *All locks are supplied complete with at least two keys as standard. Guarantee period applicable 40mm or 60mm backset. when used with original Chubb • Locks with a 40mm backset are normally used Keys and maintenance Finishes: Brasslux Grey Champagne Gold White Gold Enamelled Chrome Plated instructions followed. where there is restricted space, such as on a glass panelled door. Ideal for Use with: Mortice Deadlocks & Access Control Systems ▼

RL3 Rim Locks

High Security Double Security Cylinder Multi-Point

Page Page Page Page 4L67 RL6 4L73 RL6 4L74 RL6 4LC RL8

Drawback Lock Traditional Cylinder Pull

Page Page Page Page 4L69 RL7 4L70 RL7 4L75 RL8 4LP RL8

Security Drawback Lock

Page Page Page Page Page 4L71 RL7 4L72 RL7 CTS10TX RL9 CTS30TX RL9 CTS50TX RL9

RL4 Security Features

Features / Functions Door Specification Case Finishes

Locking Lockable Bolt Hold Deadlocking Door Backset Type of Champagne Pick Key Brasslux Other Drill Saw Force Gold Rim Locks Torque Tamper Mechanism Handle/Knob Back Internal External Thickness Door ProtectedSection Control ProtectedSection Resistant Resistant Resistant Resistant Resistant Resistant Guarantee

High Security

4L67 Standard ●●●●●● 10 DB ●●Auto Auto 38-57mm 60mm T, GP ● BS3621

Double Security 4L73 Narrow ●●●●10 DL/L ●●Auto Auto 38-57mm 40mm T, GP ●●White

4L74 Standard ●●●●10 DL/L ●●Auto Auto 38-57mm 60mm T, GP ●●White

Drawback Lock 4L69 Standard ●●● 10 DB/L ● Key Key 38-57mm 60mm T, GP ●●

4L70 Narrow ●●● 10 DB/L ● Key Key 38-57mm 50mm T, GP ●●

Security

4L71 Narrow ●●● 10 DL/L ▲●Auto Auto 38-57mm 40mm T, GP ●●White

4L72 Standard ●●● 10 DL/L ▲●Auto Auto 38-57mm 60mm T, GP ●●White

Traditional 4L75 Standard ●● 10 DL/L ▲●Snib Key 38-57mm 60mm T, GP ●●

Multi-Point CTS10TX NEW ●●● ●● 10 DB,L ● Key Key up to 48mm 53mm T, GP Gold Enamelled

CTS30TX NEW ●●● ●● 10 MP ● Key Key up to 45mm 53mm T, GP Gold Enamelled

CTS50TX NEW ●●● ●● 10 MP ● Key Key up to 45mm 53mm T, GP Gold Enamelled

Key: Locking Mechanism - L = Latchbolt, DL/L = Deadlocking Latch, DB = Deadbolt, MB = Multi-Bolt, MP = Multi-Point Lockable Handle - ● From Inside, ▲ From Outside only Type of Door - T = Timber, GP = Glass Panelled

RL5 Rim Locks

High Security 4L67 4L73 4L74 4L67 Security Features

Protected • Kitemarked to BS3621. Recommended by Insurance companies and the police. Section • High Security 10 disc Ava mechanism providing a high level of protection against Drill ● picking and manipulation. Resistant • Hardened steel deadbolt which 25mm 53mm automatically deadlocks on closing Saw ● ● ● Resistant the door. 27mm 27mm • Key operation from the outside. Force ● Resistant Key lockable knob operation 26mm from inside. 37mm Pick ● ● ● • Keyblank number, B-K734-M. 60mm Resistant 4L67 Torque ● ● ● Resistant

70mm 70mm Tamper ● ● ● Resistant BS3621: 1980 18mm Key Control 85mm

Guarantee 10 10 10

Double Security Features / Functions 4L73 4L74 Locking Mechanism DB DL/L DL/L Lockable Handle ● ● ● • Latchbolt automatically deadlocks on closing the door. AB Bolt Hold Back ● ● ● • Key operation from outside. Key lockable lever handle operation from inside. 4L73 65mm 40mm 4L74 85mm 60mm • Keyblank number, B-K727. Deadlocking Internal Auto Auto Auto 22mm 57mm Deadlocking External Auto Auto Auto

Door Specification 29mm 29mm

Door Thickness 38-57mm 38-57mm 38-57mm 20mm 30mm Backset 60mm 40mm 60mm B Type of Door T, GP T, GP T, GP

88mm 4L73 4L74 Case Finish 88mm Champagne Gold ● ●

16mm Brasslux ● ● ●

13mm A Other White White

RL6 Rim Locks

Drawback Lock 4L69 4L70 4L71 4L72 4L69 4L70 Security Features

Protected • Double throw deadbolt giving 20mm projection. AB Section • Key operated deadbolt from either side. 4L69 92mm 60mm 4L70 73mm 50mm Drill • Latchbolt key operated from outside, handle operated from inside. Resistant Keyblank number, B-K727. • 22mm Saw ● ● 47mm B Resistant

27mm 31mm Force Resistant

29mm Pick ● ● ● ● Resistant

Torque ● ● ● ● 4L69 4L70 Resistant 74mm 20mm 74mm 12mm Tamper ● ● Resistant

Key 10mm A Control

Guarantee 10 10 10 10

Security Functions 4L71 4L72 Locking Mechanism DB, L DB, L DL/L DL/L Lockable Handle ▲ ▲ • Latchbolt automatically deadlocks on closing the door. AB Bolt Hold Back ● ● ● ● • Key operation from outside. Lever handle operation from inside. 4L71 60mm 40mm 4L72 92mm 60mm • Security lock with deadlocking by reverse turn of key in outside cylinder. Deadlocking Internal Key Key Auto Auto 22mm • Keyblank number, B-K727. Deadlocking External Key Key Auto Auto 45mm Door Specification 25mm 25mm Door Thickness 38-57mm 38-57mm 38-57mm 38-57mm

5mm 30mm Backset 60mm 50mm 40mm 60mm B Type of Door T, GP T, GP T, GP T, GP

4L71 4L72 Finishes

74mm 74mm Champagne Gold ● ● ● ●

Brasslux ● ● ● ● 15mm

A Other White White

RL7 Rim Locks

Traditional Security 4L75 4LC 4L75 Security Features

Protected • Classic styling with deadlocking by snib. Section Optional • Key operation from the outside. Lever/knob handle Drill operation from inside. Resistant • Security lock with deadlocking by 25mm Saw reverse turn of the key in outside 41mm Resistant cylinder. 24mm 24mm Keyblank number, B-K727. Force • Resistant 19mm 4mm 60mm Pick ● ● Resistant 4L75 Torque ● ● Resistant 68mm 68mm

Tamper Resistant 15mm

92mm Key Control

Guarantee 10 10

Replacement Cylinder Cylinder pull Functions 4LC 4LP Locking Mechanism DL/L Lockable Handle ▲ • Spare or replacement pin tumbler rim cylinder. • Provides an easy means of closing a door from the outside. Bolt Hold Back ● • Available as 6 pin as standard. • Suitable for use with all Chubb Cylinder Rim Locks. • Keyblank number, 6 pin = B-K727. • Available in brass. Deadlocking Internal Snib

47mm 5mm Deadlocking External Key

For use with: Door Specification

4L71 ✓ Door Thickness 38-57mm 38-57mm 4L72 ✓ 70mm Backset 60mm 4L75 ✓ Type of Door T, GP

• Also available on Finishes Chubb TX Champagne Gold ● patented system. 18mm List number TXR, 46mm Ø (see cylinder Brasslux ● ● catalogue). 32mm Other

RL8 Rim Locks

Multi Point Drawback Lock CTS10TX CTS30TX CTS50TX CTS30TX, CTS50TX NEW CTS10TX NEW Security Features

• Multiple locking points from 3 to 5. • Supplied complete with High Security Protected ● ● ● CTS30TX CTS50TX Section Patented TX System and security rose. CTS30TX = 3 CTS50TX = 5 • Key operation from outside, key and pull Drill ● ● ● Resistant • Supplied complete with High Security Patented TX handle from inside. System and security rose. • Keyblank number TXRKB Saw ● ● ● • Key operation from outside, key and lever from Resistant inside. Force • Keyblank number CTXRKB Resistant

Door Size CTS30TX CTS50TX Pick ● ● ● Resistant Standard 2215mm 2215mm

Max. Std. 2215mm 2215mm Torque ● ● ● Resistant Max. Special 2460mm 2460mm Minimum 1850mm 1850mm Tamper Resistant

Key CTS30TX CTS50TX Control

518mm Guarantee 10 10 10

35mm Functions 31mm 980mm 100mm Locking Mechanism DB, L MP MP

Lockable Handle 12.5mm 362mm 35mm 35mm Bolt Hold Back ● ● ● 35mm 12.5mm 35mm 12.5mm

179mm 53mm Deadlocking Internal Key Key Key 53mm 53mm 2215mm 179mm 179mm 179mm Deadlocking External Key Key Key 45mm 45mm 45mm 2215mm Door Specification 20mm 20mm

35mm 20mm Door Thickness up to 48mm up to 45mm up to 45mm 424mm 62mm 35mm Backset 53mm 53mm 53mm

1056mm 100mm Type of Door T, GP T,GP T, GP

Finishes

532mm Champagne Gold

Brasslux

Other Gold Enamelled

RL9 • Conquest

• Steel

• Aluminium

• Laminated Steel

• Brass

• Hasps and Staples Padlocks

Padlocks

P1 Padlocks

Padlocks Index Introduction How to Specify Security Features

Chubb offer a comprehensive range of padlocks How to Specify 1 • Introduction P2 which are ideal for commercial, industrial and Chubb have developed a series of icons to enable Protected Section residential use. Products are available as an option on a • Padlock Choice P3 the process of product specification to be patented key section. The range includes open, close and extra close simplified. 2 • Shackle Information P3 variants to suit the particular application, together From today you can specifically detail your with a choice of hardened steel or stainless steel requirements for a product, therefore ensuring that Drill Resistant Hardened protection against drill attack. • Features and Functions P3 shackle. it includes particular security features. • Photo Gallery P4 In addition, a range of hasps and staples is available 3 to complement the padlock range. Example: If you require a padlock that has Saw Resistant • Range Table P5 hardened protection against drill attack, look for Hardened protection against saw attack. the Drill Resistant icon (number 2) in the range • Conquest Range P6 table on page 5 and then on subsequent pages 4 where further product information is supplied. Force Resistant • Battleship P7 Chubb is accredited with and Built in strength against force attack. meets the requirements of • Cruiser P7 BS EN ISO 9001: 1994. Chubb, Simplifying the Specification Process. 5 Pick Resistant • Hercules P7 Built in protection to resist picking.

• Ava Brass P7 6 Torque Resistant • Steel Range P8 Built in strength against torque attack.

• Aluminium Range P9 Keying Groups Testing 7

Laminated Steel Range P9 Throughout the catalogue you will see a column As part of the Chubb commitment to provide Tamper Resistant • Built in protection against Tampering. headed. product to meet customer requirements, Chubb Brass Range P10-11 Key Control • padlocks are subjected to exacting test 8 programmes. Corrosion Resistant The information shown under this heading can • Hasps and Staples Gallery P12 These test padlocks for operating durability, Products conform to appropriate help you identify which products can be Keyed anti-corrosion requirements. resistance to corrosion as well as strength against • Hasps and Staples Range Table P12 Alike or Masterkeyed. different forms of attack such as drilling, sawing 9 The products that can be keyed to work with other Fire Resistant • Padbars P13 and twisting. products are given a group code. Products conform to appropriate fire test requirements. • Hasps and Staples P14 KA - means the product can be Keyed Alike with more of the same product. 10 • Notes Page P15 Escape MK - means the product can be Masterkeyed with Products for use on an escape door. more of the same product.

Note: We have made every effort to ensure that at A Group Letter (eg A) means the product can be 11 the time of going to print all information shown in Keyed Alike or Masterkeyed with more of the same Key Control this catalogue is correct. However, in our efforts to product and with other products listed in the same The products can be included in a key continually improve our products and offer only the control system. highest levels of security and quality we reserve the group. right to make alterations to the product 12 specifications shown in this catalogue. All Example: Guarantee dimensions provided within this catalogue are A padlock in group H could be made to work from Products are guaranteed for a period of approximate and for guidance only. the same key as other products in group H. time.

P2 Padlocks

Padlock Choice Features and Functions

• Choice of padlock is based upon specific application Body Materials Shackle Materials Protected Section and the relative degree of risk associated with that Available on a patented key location. section. Hardened Hardened Stainless • These factors determine whether an open shackle, Steel Steel Steel Drill Resistant Selected hardened or tough close shackle or rectangular padlock is required materials to resist drill attack. and whether a sprung or unsprung mechanism is preferred. Aluminium Saw Resistant Hardened steel shackle or staple • Choice of hasp or staple is also dependent upon not less than 8mm diameter. application and the relative degree of risk associated Force Resistant with that location. Laminated Robust construction to resist Steel determined attack.

Pick Resistant Locking mechanism incorporates Brass pick resistant device(s).

Shackle Information Torque Resistant Rigid construction to resist Type Stainless twisting. Steel 5 common types offering different clearances Tamper Resistant and therefore different security features and Concealed fixings (Hasps only). application opportunities. Corrossion Resistant Shackle Type Successfully completed neutral Diameter (D) salt spray test. The shackle is the fixing point of the padlock Open Key Control Products are Masterkeyble or and the diameter is critical to ensuring the right able to be Keyed Alike. level of security is offered and the padlock is Guarantee ideal for the application where it is Close F Guarantee period applicable going to be used. when used with original Chubb D Keys and maintenance instructions followed. Clearance (C) (F) Concealed Key Retention = The clearance here is the C When the padlock is open the key cannot be removed. vertical (C) or horizontal Yes ● No Optional O (F) clearance as shown. Rectangular Operating Mechanism Rekeyable = Locking Padlock key combination can be changed by local dealer. Long Key Snap Chubb, simplyfying the Yes ● No specification process

Ideal for Use with: Hasps and Staples and Security Chains ▼

P3 Padlocks

Conquest Battleship Cruiser

Page Page Page Page Page Page Page 1K12 P6 1K13 P6 1K22 P6 1K23 P6 1K23/GB P6 1K11P7 1K21 P7

Hercules Brass Steel Aluminium

Page Page Page Page Page Page Page 1K57 P7 1K42 P7 1K941 P8 1K950 Range P8 1K952 P8 1KD01 P8 1K240 & 1K250P9

Laminated Brass

Page Page Page Page Page Page 1K840, 1K841 1K360 & 1K375 1K730, 1K740 & 1K850 P9 1K600 Range P10 1K642 & 1K652P10 P10 & 1K750 P11 1K401& 1K501P11

P4 Security Features

Features / Functions Specification Shackle Material

Padlocks Key Re- Vertical (C) Shackle Shackle Shackle Locking Hardened Pick Key Other Drill Saw Force Steel Torque Tamper Retention Keyable Type DiameterClearance Mechanism ProtectedSection Corrosion Control ProtectedSection Resistant Resistant Resistant Resistant Resistant Resistant Resistant Guarantee Heavy Duty

1K12C or A (Conquest) ●●●●●N/A ● H* 10 ● ● (not A) Close 14mm 15mm Key ● 1K13C (Conquest) ●●●●●N/A ● KA 10 ●● Close 14mm 15mm Key ● 1K22C or A (Conquest) ●●●●●N/A ● H* 10 ●●(not A) Open 14mm 30mm Key ● 1K23C (Conquest) ●●●●●N/A ● KA 10 ●● Open 12.5mm 30mm Key ● 1K23C/GB (Conquest) ●●●●●N/A ● H* 10 ●● Close 12.5mm 24mm Key ● 1K11 (Battleship) ●●●●N/A KA 10 Close 12.5mm 17mm Key ● 1K21 (Cruiser) ●●●●N/A KA 10 Close 12.5mm 17mm Key ● 1K57C or A (Hercules) ●●●●●N/A ● H* 10 ●●(not A) Concealed 16mm N/A Key ● 1K42 (Ava Brass) ●●●●N/A ● H* 10 ● Open 8mm 24mm Key ●

Steel

1K941 ●●N/A ● 5 ● Open 6mm 50mm Snap ● 1K945 ●● ● N/A ● 5 ● Open 8mm 27mm Snap ● 1K950 ●●●●●N/A ● 5 ● Open 9.5mm 27mm Snap ● 1K960 ●●●●●N/A ● 5 ● Open 11mm 27mm Snap ● 1K952 ●●●●●N/A ● 5 ● Close 9mm 28mm Snap ● 1KD01 (Discus) ●● ●N/A ● 5 ● Close 10mm 17mm Key ●

Aluminium 1K240 ● N/A ● 5 ● Open 6mm 25mm Snap Stainless 1K250 ● N/A ● 5 ● Open 9.5mm 25mm Snap Stainless

Laminated Steel 1K840 N/A 5 Open 6mm 22mm Snap ● 1K841 N/A 5 Open 6mm 62mm Snap ● 1K850 ●●N/A 5 Open 9mm 26mm Snap ●

Brass 1K625 N/A ● 5 Open 4mm 14mm Snap ● 1K630 N/A ● KA 5 Open 5mm 19mm Snap ● 1K640 N/A ● KA 5 Open 6mm 23mm Snap ● 1K641 N/A ● 5 Open 6mm 62mm Snap ● 1K642 N/A ● 5 Close 7mm 19mm Snap ● 1K650 ● N/A ● 5 Open 8mm 30mm Snap ● 1K652 ● N/A ● 5 Close 9mm 21mm Snap ● 1K660 ● N/A ● 5 Open 9.5mm 35mm Snap ● 1K360 ●●N/A ● 5 Close 10mm 12mm Snap ● 1K375 ●● ●N/A ● 5 Close 11mm 13mm Snap ● 1K730 N/A ● 5 Open 5mm 18mm Snap Stainless 1K740 N/A ● KA 5 Open 6mm 22mm Snap Stainless 1K750 ● N/A ● 5 Open 8mm 29mm Snap Stainless 1K401 ● N/A ● 5 Open 7.5mm 25mm Snap ● 1K501 ● N/A ● 5 Open 9mm 30mm Snap ● Key: H*= Masterkey grouping which only applies to the Ava versions. Non Ava are KA only. P5 Padlocks

Conquest 1K12 1K13C 1K22 1K23C1K23C/GB 1K12C • 1K12A 1K13C Security Features

Protected • Close shackle heavy duty padlock for use in the more • Close shackle heavy duty padlock with extra high shoulders Section demanding of applications. providing additional protection against bolt cropper attack. Key to lock, key to unlock. Double locking. Ideal for the most demanding of applications Drill ● ● ● ● ● • Resistant • Key retention when the padlock is unlocked. • Key to lock, key to unlock. Double locking. Hardened steel unsprung shackle. • Key retention when the padlock is unlocked. Saw ● ● ● ● ● • Resistant • Hardened steel unsprung shackle. 18mm 18mm Force ● ● ● ● ● Resistant

14mm 14mm Pick ● ● ● ● ●

QUE Resistant N S

15mm O T

C

15mm C

O T

N S E Q U

QUE N S O T

C C

O

T Torque

N S

E Q U ● ● ● ● ● 92mm 111mm Resistant

Tamper Resistant N/A N/A N/A N/A N/A

Corrosion ● ● ● ● ● Resistant 1K12C 68mm 34mm 1K13C 68mm 34mm Key Control H* KA H* KA H*

Conquest Guarantee 10 10 10 10 10

1K22C • 1K22A 1K23C · 1K23C/GB Features / Functions

• Open shackle heavy duty padlock for use on the majority of • A heavy duty modular design enabling the padlock to be used as Key Retention ● ● ● ● ● security applications. open shackle or close shackle with the ‘Shackle Guard’. ● ● ● ● ● • Key to lock, key to unlock. Double locking. • Key to lock, key to unlock. Double locking. Re-Keyable (not A) (not A) • Key retention when the padlock is unlocked. • Key retention when the padlock is unlocked. Specification • Hardened steel unsprung shackle. • Hardened steel unsprung shackle. Loose shackle option available. Shackle Type Close Close Open Open Close 1K23CGB 30mm 29mm Shackle Diameter 14mm 14mm 14mm 12.5mm 12.5mm

14mm 12.5mm Shackle Clearance 15mm 15mm 30mm 30mm 24mm 30mm 30mm Locking Mechanism Key Key Key Key Key QUE N S QUE N S O T O T

C

C C C

O

T

O

T

N S

N S E Q U E Q U Shackle Material 64mm 62mm

Hard Steel ● ● ● ● ●

68mm 34mm 65mm 1K22C 1K23C 25mm Other

P6 Padlocks

Battleship Cruiser 1K11 1K21 1K57 1K42 1K11 1K21 Security Features

Protected • Close shackle tough padlock for use on security applications. • Tough padlock for use in security applications. Section • 6 lever mechanism, key to lock, key to unlock. • 5 lever mechanism, key to lock, key to unlock. Drill ● • Non-key retaining. • Non-key retaining. Resistant • Hardened steel unsprung shackle. • Hardened steel unsprung shackle. 17mm Saw ● ● ● ● 17mm Resistant

1K11 12.5mm 1K21 12.5mm Force ● ● ● ● Resistant 17mm 17mm

Pick ● ● ● ● Resistant 95mm 86mm

Torque ● ● ● ● Resistant

Tamper Resistant N/A N/A N/A N/A 74mm 65mm 27mm 27mm Corrosion ● ● Resistant

Key Control KA KA H* H*

Hercules Ava Brass Guarantee 10 10 10 10

1K57C • 1K57A 1K42 Features / Functions

• Robust padlock, totally concealed when locked. • 10 disc Ava brass padlock providing Key Retention ● ● • Vertical sliding shackle which comes through the staple hole a high level of protection against picking making direct attack impossible. and manipulation. Re-Keyable ● (not A) Available with either Ava 10 disc or 6 pin locking mechanism. • Key retention when the padlock is unlocked. • Specification • Key retention when the padlock is unlocked. • Hardened steel unsprung shackle. Hardened steel unsprung shackle. Shackle Type Close Close Concealed Open • 25mm • Suitable for use with Chubb 7B018 and 7B020 padlocks. Shackle Diameter 12.5mm 12.5mm 16mm 8mm 1K42 8mm 1K57 Shackle Clearance 17mm 17mm N/A 24mm 24mm

Locking Mechanism Key Key Key Key 110mm

42mm Shackle Material

Hard Steel ● ● ● ●

50mm 69mm 50mm 23mm Other

P7 Padlocks

Steel 1K941 1K945 1K950 1K960 1K952 1KD01 1K941 · 1K945 · 1K950 · 1K960 Security Features

Protected • Open shackle steel padlocks for use on the majority of security applications. (mm) 1K941 1K945 1K950 1K960 Section • Snaplocking, key to unlock. Double locking. • Non -key retaining. A 45 46 46 52 Drill ● ● ● ● ● • Hardened steel sprung shackle, complete with unique shackle changing facility. B 38 45 50 63 Resistant C 50 27 27 27 F D 6 8 9.5 11 Saw ● ● ● ● ● Resistant E 19 19 19 25 1K960 D F 20 20 20 32 Force ● ● ● ● Resistant C Pick ● ● ● ● ● Resistant

Torque ● ● ● ● Resistant A Tamper Resistant N/A N/A N/A N/A N/A N/A

Corrosion ● ● ● ● ● ● Resistant B E Key Control

Steel Discus Steel Guarantee 5 5 5 5 5 5

1K952 1KD01 Features / Functions

• Steel padlock for security applications requiring a close • Stainless steel padlock for medium security applications Key Retention ● shackle option. requiring a close shackle option. ● ● ● ● ● • Snaplocking, key to unlock. • Non - key retaining. • Key to lock, key to unlock. Re-Keyable • Hardened steel sprung shackle, complete with unique shackle • Key retention when the padlock is unlocked. Specification changing facility. • Hardened steel unsprung shackle. 20mm Shackle Type Open Open Open Open Close Close 20mm Shackle Diameter 6mm 8mm 9.5mm 11mm 9mm 10mm 1KD01 10mm 1K952 9mm 17mm Shackle Clearance 50mm 27mm 27mm 27mm 28mm 17mm 28mm 70mm Locking Mechanism Snap Snap Snap Snap Snap Key 79mm

Shackle Material

Hard Steel ● ● ● ● ● ● 70mm 26mm 50mm 19mm Other

P8 Padlocks

Aluminium 1K240 1K250 1K840 1K841 1K850 1K240 · 1K250 Security Features

Protected • Open shackle aluminium padlocks for use in the majority (mm) 1K240 1K250 Section of applications. Ideal for use in harsh environments where A 46 46 corrosion resistance is of prime concern. Drill B 38 50 Resistant • Snaplocking, key to unlock. Double locking. F C 25 25 Non -key retaining. D 6 9.5 Saw ● • Resistant D E 19 19 Stainless steel sprung 1K250 • F 20 20 shackle, complete with Force unique shackle changing C Resistant facility. Pick ● ● Resistant

Torque ● A Resistant

Tamper Resistant N/A N/A N/A N/A N/A

Corrosion ● ● B E Resistant

Key Control

Laminated Steel Guarantee 5 5 5 5 5

1K840 · 1K841 · 1K850 Features / Functions

• Open shackle laminated steel padlocks for use in general applications. (mm) 1K840 1K841 1K850 Key Retention A 36 36 39 • Snaplocking, key to unlock. Double locking. Re-Keyable ● ● B 40 40 50 • Non-key retaining • Hardened steel sprung shackle. C 22 62 26 Specification F D 66 9 E 22 22 25 Shackle Type Open Open Open Open Open 1K850 D F 20 20 20 Shackle Diameter 6mm 9.5mm 6mm 6mm 9mm C Shackle Clearance 25mm 25mm 22mm 62mm 26mm

Locking Mechanism Snap Snap Snap Snap Snap A Shackle Material

Hard Steel ● ● ●

B E Other Stainless Stainless

P9 Padlocks

1K600 Brass Range 1K642 1K652 1K360 1K375 1K625 · 1K630 · 1K640 · 1K650 · 1K660 Security Features

Open shackle brass padlocks for general applications. Protected • (mm) 1K625 1K630 1K640 1K641 1K650 1K660 Section • Snaplocking, key to unlock. A 25 28 33 33 40 42 Drill • Non -key retaining. B 25 30 40 40 50 60 Resistant • Hardened steel sprung shackle. C 14 19 23 62 30 35 D 4 5 6 6 8 9.5 Saw ● ● ● F Resistant 1K660 E 12 12 14 14 16 18 D F 13 16 22 22 28 35 Force ● Resistant Please C Pick Resistant refer to page 5 Torque ● ● Resistant for details A Tamper Resistant N/A N/A N/A N/A

Corrosion ● ● ● ● Resistant B E Key Control

Brass Guarantee 5 5 5 5

1K642 · 1K652 1K360 · 1K375 Features / Functions

• Close shackle brass padlocks for general applications. • Close shackle brass padlocks for general applications. Key Retention Snaplocking, key to unlock. Snaplocking, key to unlock. • (mm) 1K642 1K652 • (mm) 1K360 1K375 Re-Keyable Non -key retaining. A 52 63 Non -key retaining. • • A 73 78 Hardened steel sprung shackle. B 40 50 Hardened steel sprung shackle. Specification • • B 43 48 C 19 21 C 12 13 D 79 Shackle Type Close Close Close Close D 10 11 1K642 E 14 17 E 18 18 Shackle Diameter 7mm 9mm 10mm 11mm F 14 19 F 18 24 F Shackle Clearance 19mm 21mm 12mm 13mm F D D Locking Mechanism Snap Snap Snap Snap 1K360 C Shackle Material C A B Hard Steel ● ● ● ● ●

B E A E Other

P10 Padlocks

Brass Weatherproof 1K730 1K740 1K750 1K401 1K501 1K730 · 1K740 · 1K750 Security Features

Protected • Open shackle brass padlocks for general applications. (mm) 1K730 1K740 1K750 Section • Stainless steel sprung shackle, therefore ideal for use in harsh environments where anti-corrosion A 28 33 40 is of prime concern. Drill B 30 40 50 Resistant • Snaplocking, key to unlock. C 18 22 29 Non -key retaining. D 56 8 Saw ● ● ● • F Resistant E 12 15 16 1K740 D F 16 23 28 Force Resistant

C Pick Resistant

Torque Resistant A 1K730 Tamper Resistant N/A N/A N/A N/A N/A

Corrosion ● ● ● ● ● B E Resistant

Key Control KA

Brass Guarantee 5 5 5 5 5

1K401 · 1K501 Features / Functions

Key Retention • Open shackle 6 pin brass padlock for general applications, complete with black outer sleeve. (mm) 1K401 1K501 Snaplocking, key to unlock. A 38 45 • Re-Keyable • Non -key retaining. B 46 55 F • Hardened steel sprung shackle. C 25 30 Specification D 7.5 9 D E 20 22 Shackle Type Open Open Open Open Open 1K401 F 24 28 C Shackle Diameter 5mm 6mm 8mm 7.5mm 9mm

Shackle Clearance 18mm 22mm 29mm 25mm 30mm

Locking Mechanism Snap Snap Snap Snap Snap A Shackle Material

Hard Steel ● ●

B E Other Stainless Stainless Stainless

P11 Hasps and Staples

Conquest

Page Page Page 7B020 P13 7B018 P13 7007 P13

Hasps & Staples

Page Page Page Page 7100 P14 7155 P14 7195 P14 7009 P13

Security Features

Features / Functions Specification Finishes

Key Re- Door Shackle Hasp Staple Grey Other Hasps and Staples Pick Key Drill Saw Force Retention Keyable Torque Tamper Thickness Diameter Material Material ProtectedSection Corrosion Control ProtectedSection Resistant Resistant Resistant Resistant Resistant Resistant Resistant Guarantee Padbars

7B020 N/A ●●●N/A ●●●N/A 10 N/A N/A up to 100mm 16mm Hard Steel Hard Steel ● 7B018 N/A ●●N/A ●●N/A 10 N/A N/A 38mm-70mm 16mm Steel Hard Steel ● 7007 N/A ●●N/A ● N/A 10 N/A N/A 38mm-70mm 16mm Steel Hard Steel ● 7009 N/A ●●N/A ● N/A 10 N/A N/A 38mm-70mm 16mm Steel Hard Steel ●

Hasps & Staples

7100 N/A ●●N/A ● N/A 5 N/A N/A up to 40mm 11mm Hard Steel Hard Steel Black 7155 N/A N/A ● N/A 5 N/A N/A up to 40mm 9.5mm Steel Hard Steel Black 7195 N/A N/A ● N/A 5 N/A N/A up to 40mm 9.5mm Steel Hard Steel Black

P12 Hasps and Staples

Padbars 7B020 7B018 7007 7009 7B020 7B018 Security Features

Protected • An extra high security heavy duty padbar designed to • A high grade malleable iron padbar with a hardened steel staple. Section N/A N/A N/A N/A complement the Conquest range of padlocks. • Secured with high tensile clutch head screws fixed through heavy Manufactured from an energy absorbent elastomeric polymer duty steel thrust plates to resist unauthorised removal. Drill ● ● ● ● • Resistant core and a special case hardened design which will minimise drill • Horizontal or vertical fitting. penetration. • For use with padlocks up to 16mm diameter shackle. Saw ● • Rotating shackle design accommodates both vertical and Resistant horizontal shackle padlocks and prevents torque attack on padlock. 7B018 Force ● ● ● ● • For use with padlocks up to 16mm diameter shackle. Resistant

Pick Resistant N/A N/A N/A N/A 146mm 129mm 101mm Torque Resistant ● 80mm

227mm Tamper ● ● ● ● 7B020 16mm 16mm Resistant

26mm 32mm Corrosion ● ● 14mm Resistant

Key Control N/A N/A N/A N/A

Padbars Guarantee 10 10 10 10

7007 7009 Features / Functions

• A durable padbar with a hardened steel staple that bolts directly • A durable padbar with a hardened steel staple that bolts directly Key Retention N/A N/A N/A N/A to the door. to the door. • Horizontal fitting. • Vertical fitting. Re-Keyable N/A N/A N/A N/A 57mm 80mm • For use with padlocks up to 16mm diameter shackle. • For use with padlocks up to 16mm diameter shackle. Specification 7007 up to 38mm- 38mm- 38mm- Door Thickness 100mm 70mm 70mm 70mm

CHUBB Shackle Diameter 16mm 16mm 16mm 16mm Hard Hasp Material Steel Steel Steel 240mm 80mm 184mm 87mm Steel

CHUBB CHUBB Staple Material Hard Hard Hard Hard Steel Steel Steel Steel 65mm 87mm

Finishes CHUBB

●●●● 16mm 52mm Grey 7009 6mm 16mm 52mm

6mm Other

P13 Hasps and Staples

Hasps and Staples 7100 7155 7195 7100 Security Features

Protected • A medium duty security hasp. Section N/A N/A N/A 112mm 77mm • Hardened steel straight bar construction. Drill ● • Suitable for left or right hand doors. Resistant

• For use with padlocks up to 11mm diameter shackle. 43mm 46mm Saw Resistant

Force ● Resistant DEN

R E

A D 10mm H 40mm Pick Resistant N/A N/A N/A

7100 Torque Resistant

Tamper ● ● ● Resistant

Corrosion Hasps and Staples Resistant Key N/A N/A N/A 7155 7195 Control

• A general purpose single hinge hasp. • A general purpose double hinge hasp. Guarantee 5 5 5 Fits around corners or angles or can be used on double doors. Fits around corners or angles or can be used on double doors. • • Features / Functions • Suitable for left or right hand doors. • Suitable for left or right hand doors. • For use with padlocks up to 9.5mm diameter shackle. • For use with padlocks up to 9.5mm diameter shackle. Key Retention N/A N/A N/A

Re-Keyable N/A N/A N/A

Specification

up to up to up to Door Thickness 40mm 40mm 40mm

7155 7195 Shackle Diameter 11mm 9.5mm 9.5mm

162mm 200mm Hard Hasp Material Steel Steel Steel

Staple Material Hard Hard Hard Steel Steel Steel 44mm 44mm Finishes

D E N D E N R E R E A A D D 9mm 9mm H H Grey 32mm 32mm

Other Black Black Black

P14 Window Security

• Locks for Hinged Windows

• Locks for Sliding Sash Windows

Door Security

• Security Fittings for Hinged Doors

• Security Fiittings for Sliding Doors SecondarySecurity

Secondary Security Secondary Security

Secondary Introduction How to Specify Security Features

Security Index Chubb have a very comprehensive range of high Chubb have developed a series of icons to enable 1 quality secondary security products to improve the the process of product specification to be Protected Section Products are available as an option on a • Introduction SS2 security on doors and windows. simplified. patented key section. Window Security Locks are available to suit wooden, metal and From today you can specifically detail your 2 requirements for a product, therefore ensuring that plastic windows that help to secure hinged or Drill Resistant • Window Types SS3 sliding window types. it includes particular security features. These will Hardened protection against drill attack. give confidence when specifying and ensure that Additional security fittings for all types of doors are • Features and Functions SS3 the right products are used on the right application. 3 available in the Chubb range. Bolts, viewers and • Photo Gallery SS4 Example: If you require a door lock that is Tamper Saw Resistant chains are designed to fit standard hinged doors Hardened protection against saw attack. and locks are available to secure aluminium and Resistant look for the screwdriver icon (7) in the • Range Table SS5 range table. wooden sliding patio doors. 4 • Locks for Hinged Windows SS6 - 9 Force Resistant Built in strength against force attack. • Locks for Sliding Windows SS10 -11 Chubb is accredited with and meets Chubb, Simplifying the Specification Process. Door Security the requirements of BSEN9001 5 Pick Resistant • Door Types SS11 Built in protection to resist picking.

• Features and Functions SS11 6

• Photo Gallery SS12 Torque Resistant Keying Groups Built in strength against torque attack. • Range Table SS13 7 Throughout the catalogue you will see a column headed. Key Control Security for Hinged Doors Tamper Resistant Built in protection against Tampering. • Door Bolts SS14 The information shown under this heading can help you identify which products can be Keyed Alike or Masterkeyed. 8 • Door Viewers SS15 Many products in the Chubb Secondary Security Range have the same keying mechanism and so can be Corrosion Resistant Products conform to appropriate • Door Chains SS16 conveniently operated from a single key. Locks offering this option will either have a universal key operation OR anti-corrosion requirements. a group code reference which matches it to other • Hinge Bolts SS16 products in the same group - eg. the 8K13 is a unique 9 key in key control group F, so it could be keyed alike to Fire Resistant Security for Sliding Doors SS17 -18 Products conform to appropriate fire test any other product in group F, like the 8K114. requirements.

• Notes SS19 10 For the complete list of Chubb product keying groups, Escape see the chart in the introduction section. Products for use on an escape door.

Note: We have made every effort to ensure that at 11 the time of going to print all information shown in Key Control this catalogue is correct. However, in our efforts to The products can be included in a key continually improve our products and offer only the Trade and Multi Pack Options control system. highest levels of security and quality we reserve the Keys right to make alterations to the product 12 specifications shown in this catalogue. All Products are available with or Guarantee Various pack sizes and formats are available, see the dimensions provided within this catalogue are without keys. Products are guaranteed for a period of approximate and for guidance only. price list for details. time. See the price list for details.

SS2 Window Security

Window Types Features and Functions

Hinged Tamper Resistant Casement Ventilation Position Concealed fixings. Some locks allow the window to Windows be locked both in the closed and Key Control in a slightly open position It is possible to make locks in the same keying group work allowing ventilation. from the same key. Materials Guarantee T Timber Guarantee period applicable when used with original Chubb M Metal Keys and maintenance instructions followed. P PVCu

Narrow Frame Many Chubb locks have a body Fitting Aids of 20mm or less Many products are Wedge and are therefore supplied with Ease of suitable for a For tapered frames a Fitting in mind and are narrow frame wedge is supplied to supplied with fitting aids square up the lock to as standard. the window section. Sliding Sash Drill Bit To help make Windows sure your lock fixings are secure the correct size bit is pre-packed. Universal or Unique Key Universal key means there is one standard key that works the lock. Unique Key means that variations of the key shape provide a different number of keys to the lock.

Finishes: Brass White Brown

Additional Security: On windows larger than 0.5 metre sq. it is recommended that 2 locks are fitted to help against a force attack ▼

SS3 Window Security

Locks for Hinged Windows

Page Page Page Page Page Page 8001 SS6 8K100 SS6 8K101 SS6 8K102 SS7 8K109 SS7 8K113 SS7

Locks for Hinged Windows

Page Page Page Page Page 8K118 SS8 8K120 SS8 8012 SS8 8K106 SS9 8K123 SS9

Locks for Sliding Sash Windows

Page Page Page Page Page 8013 SS9 8K104 SS9 8K108 SS10 8K114 SS10 WS1 SS10

SS4 Security Features

Features/Functions Window Specification Case Finishes Window Security Universal/ Locking Method Locks Existing Ventilation Fitting Aids Window Suited to Key Brass White Brown Tamper Unique Key Key Manual Automatic Fastener Position Supplied Material Narrow Frame Control Resistant Guarantee Locks for Pivoted Windows

8001 Window Bolt ● E10 Universal ● T ●●

8K100 Window Lock ● C10 Unique ●● DB TM ● ●

8K101 Window Lock ● B10 Universal ● T ● ●●●

8K102 Window Lock ● 10 Universal ● WED T ● ●●●

8K109 Window Lock ● 10 Universal ● WED T ● ●

8K113 Window Lock ● F10 Unique ● WED T ● ●

8K118 Window Lock B10 Universal ● T ● ●●

8K120 Window Lock ● 10 Universal ● WED T ● ●●●

8012 Window Lock ● C10 Unique ●● M ● ●

8K106 Window Lock ● B10 Universal ● DB M ● ●

8K123 Window Lock ● B10 Universal ● DB P ● ●

Locks for Sliding Sash Windows

8013 Window Bolt D10 Universal ● T ● ●

8K104 Window Bolt ● D10 Universal ● DB T ● ●

8K108 Window Lock ● 10 Universal ● T ●

8K114 Window Lock ● F10 Unique ●●T ●

WS1 Ventilation Lock 10 Universal ●●T ●

Key: Fixings Supplied: WED = Wedge, DB = Drill Bit.

SS5 Window Security

Locks for Hinged Windows 8001 8K100 8K101 8001 Window Bolt Security Features

• Mortice bolt that fits into the Tamper ● ● ● window section and is shot into Resistant the frame. Key E C B Control 16 13 41

Guarantee 10 10 10

33 19 Features/Functions

Universal/Unique Key Universal Unique Universal

● ● ● 8K100 Window Lock Key

Locking Lock for surface fixing onto the 32 Manual ● • Method window section. Bolt is thrown into the fixed frame by turning the catch, the bolt is then unlocked Automatic with the key.

70 Locks Existing Fastener

Ventilation Position

Fitting Aids Supplied DB 22 20 Window Specification 8K101 Window Lock Window Material T TM T • Lock is surface fixed onto the window section and is locked Suited to Narrow Frame ● ● around the frame fixed staple by use of the key. Case Finishes • A clenching action helps to pull the 52 window to the frame. Brass ● ●

White ●●●

28 20

Brown ●

SS6 Window Security

Locks for Hinged Windows 8K102 8K109 8K113 8K102 Window Lock Security Features

• Lock for surface fixing to the fixed Tamper ● ● ● frame which is locked onto the lock Resistant plate on the window section by pushing the lock barrel. Key F • Easy to use ‘Push to lock’ system. Control • Released by key. 38 Guarantee 10 10 10

Features/Functions

27 20 Universal/Unique Key Universal Universal Unique

● ● 8K109 Window Lock Key

Locking • Lock is surface fixed onto the Manual ● window section, locking into the Method fixed frame by use of the key. Automatic

36 Locks Existing Fastener

Ventilation Position

21 18 Fitting Aids Supplied WED WED WED

Window Specification 8K113 Window Lock Window Material T T T • Surface fixed lock which locks on an oval locking plate with the turn Suited to Narrow Frame ● ● ● of the key. Lock is mounted on the fixed frame. Case Finishes 41 41

Brass ●

21 25 White ● ●●

Brown ●

SS7 Window Security

Locks for Hinged Windows 8K118 8K120 8012 8K118 Window Lock Security Features

• Lock is surface fixed onto the Tamper ● ● window section and is locked into Resistant the striking plate on the fixed 16 15 frame by use of the key. Key B C Control • Simple and cost effective.

42 43 Guarantee 10 10 10

Features/Functions

21 Universal/Unique Key Universal Universal Unique

● 8K120 Window Lock Key

Locking • Lock is surface fitted to the fixed Manual ● frame and is automatically locked Method on closing the window. The window and locking plate are Automatic ● released by use of the key. 38 Locks Existing Fastener ●

Ventilation Position

27 20 Fitting Aids Supplied WED

Window Specification 8012 Window Lock Window Material T T M 19 14 • A surface fitted lock for securing a window handle cockspur fastener. Suited to Narrow Frame ● ● ● The lock slides into position to restrict the handle movement and is released by use of the key. Case Finishes

119 Brass ● ● ●

White ● ●

Brown ● 17

SS8 Window Security

Locks for Hinged Windows 8K106 8K123 8013 8K104 8K106 Window Lock Security Features

• Lock is surface fixed onto the Tamper ● ● ● window section and is locked Resistant around the frame fixed staple by use of the key. Key B B D D • For use on metal windows only. Control 52 42

Guarantee 10 10 10 10

Features/Functions 28 32 Universal/Unique Key Universal Universal Universal Universal 8K123 Window Lock Key ● ● ● ● • Lock for surface fixing onto the window section which is locked Locking Manual around the frame fixed staple by Method use of the key.

• For use on PVCu windows only. 61 53 Automatic

Locks Existing Fastener

49 37 Ventilation Position

Fitting Aids Supplied DB DB DB

Locks for Sliding Sash Windows Window Specification 8013 Window Bolt 8K104 Window Bolt Window Material M P T T • The threaded lock barrel is fixed into the inner frame and the • The tap in fitting lock barrel is fixed into the inner frame and the window is secured by locking the inner bolt into the barrel and window is secured by locking the inner bolt into the barrel and ● ● frame using the key. frame using the key. Suited to Narrow Frame ● ● • Can also be used in hinged windows. • Can also be used in hinged windows. Case Finishes • Screw in fitting barrel. • Tap in fitting barrel and keep.

5.5 11 5.5 10 Brass ●● 35

64 64 White ●● 13 19

Brown

SS9 Window Security

Locks for Sliding Sash Windows 8K108 8K114 WS1 8K108 Window Lock Security Features

• Lock is surface fixed accross the Tamper ● ● window sections and the case is Resistant locked to the lock plate using the key. Key F Control 24 24

Guarantee 10 10 10

42 45 Features/Functions

Universal/Unique Key Universal Unique Universal

● ● ● 8K114 Window Lock Key

Locking • Lock is surface fitted and secured Manual by a locking bar which locks both Method window sections in place. The bar is secured and released by the key. Automatic • Handy storage for locking bar when not in use. Locks Existing Fastener • One way security screws. 109 26

Ventilation Position ● ● 23 74

Fitting Aids Supplied

Window Specification WS1 Ventilation Lock Window Material T T T • A key operated bolt is morticed into the outer window frame Suited to Narrow Frame which when locked out will 21 25 prevent the inner window from opening. Case Finishes

Brass ● 48 19 48

White ●●

29 Brown

SS10 Door Security

What Type of Door ? Features and Functions

• A comprehensive T T Angle of Vision Drill Resistant range of security All door viewers have a viewing area in Metal sleeve for drill protection. devices for which to see movement. This is measured in degrees. Saw Resistant both,exterior and Hardened pin in bolt for sawing interior glass protection. panelled or solid Angle of Tamper Resistant doors. Concealed fixings. Vision

Key Control It is possible to make locks in the same keying group, work Door Types from the same key.

T Timber Guarantee Guarantee period applicable M Metal M when used with original Chubb P keys and maintanance P PVCu instructions followed. Unlocked Indicator Some products have a method of showing whether the lock is in the locked or unlocked position.

Fitting Aids Many products are supplied with Ease of Fitting in mind and are supplied with fitting aids as standard • Sliding Patio Doors Drill Bit To help make Universal or Unique Key sure your lock fixings are Universal key means there is one secure the standard key that works the lock. Unique Key means that variations correct size bit of the key shape provide a different is pre-packed number of keys to the lock.

Finishes: Brass Satin Chrome White Brown

Additional Security: Where mortice bolts and/or hinge bolts are used, 2 per door are recommended to help against a force attack. ▼

SS11 Door Security

Security for Hinged Doors

Page Page Page Page Page Page 8002 SS14 8004 SS14 8006 SS14 8K117 SS15 8V001 SS15 WS8 SS15

Security for Hinged Doors

Page Page Page Page Page Page WS9 SS15 WS13 SS15 WS6 SS16 WS16 SS16 WS12 SS16 WS14 SS16

Security for Sliding Doors

Page Page Page Page 8K107 SS17 8K119 SS17 8K116 SS17 8K122 SS18

SS12 Security Features

Features / Functions Door Specification Finish Options

Door Door Universal/ Approx. Angle Locking Method Extended Key Fitting Aids Other Brass Chrome Other Door Security Drill Saw Key Material Thickness mm Tamper Unique Key of Vision Key Manual Option Supplied Features Control Resistant Resistant Resistant Guarantee Security for Hinged Doors

8002 Security Door Bolt ● E10 Univ ●● T ● White

8004 Economy Door Bolt ● E10 Univ ●● T ● White

8006 High Security Door Bolt ●●●E10 Univ ●● T ● White

8K117 Door Bolt Upgrade Cylinder F10 Uniq ● T ● White

8V001 Door Viewer 10 170˚ M,T,P 27 to 57 ●●

WS8 Door Viewer 10 130˚ M,T,P 25 to 57 ●●

WS9 Door Viewer 10 170˚ M,T,P 40 to 95 ●●

WS13 Door Viewer 10 130˚ M,T,P 35 to 57 ●●

WS6 Door Chain 10 ● T ●●

WS16 Door Chain and Bolt 10 ● T ●

White ● T WS12 Security Hinge Bolt 10 Brown

WS14 Security Hinge Bolt ● 10 T ●

Security for Sliding Doors

8K107 Sliding Door Lock ● KA 10 Uniq ● DB M ●

8K119 Sliding Door Indicator Lock ● F10 Uniq ● UI M ● White

8K116 Multi Purpose Door Bolt ● F10 Uniq ● DB OS M,T ● Silver

8K122 Anti-Lift Device ● 10 M,P White

Key: Fittings Supplied: DB = Drill Bit Other Features: OS = One way Screws UI = Unlocked Indicator

SS13 Door Security

Security for Hinged Doors 8002 8004 8006 8002 Security Door Bolt Security Features

Drill • Mortice fixing with bolt throwing into the frame. Resistant ● • Lock is invisible from outside of door. Saw Resistant ●

16 13 41 Tamper Resistant ● ● ●

Key Control E E E 61 19

Guarantee 10 10 10

Features & Functions 8004 Economy Door Bolt Universal/Unique Key Univ Univ Univ • Mortice fixing with bolt throwing into the door frame. • Lock is invisible from the outside of door. Approx. Angle of Vision • Cost effective plastic body. Key ●●● Locking Method 16 13 41 Manual

Extended Key Option ●●●

61 19 Fitting Aids Supplied

Other Features

8006 High Security Door Bolt Door Specification

• As the 8002 with additional Security. Door Material T T T • Hardened bolt giving added sawing protection. • Metal sleeve around key mechanism giving added Door Thickness (mm) drilling protection. Finish Options

16 13 41 Brass ●●●

Chrome 61 19

Other White White White

SS14 Door Security

Security for Hinged Doors 8K117 8V001 WS8 WS9 WS13 8K117 Door Bolt upgrade Cylinder Security Features

Drill • Provides a security upgrade from a universal key to Resistant a unique key mechanism for a mortice door bolt. 33 31 Saw Resistant

Tamper Resistant

60 Key Control F

Guarantee 10 10 10 10 10

Features & Functions 8V001 Door Viewer WS8 Door Viewer Universal/Unique Key Unique • Adjustable to suit various door thicknesses. • Adjustable to suit various door thicknesses. Approx. Angle of Vision 170˚ 130˚ 170˚ 130˚

Key ● Locking Method Manual

25 - 57 15 27 - 57 17 Extended Key Option

Fitting Aids Supplied 12 12 Other Features WS9 Door Viewer WS13 Door Viewer Door Specification

• Adjustable to suit various door thicknesses. • Adjustable to suit various door thicknesses. Door Material T M,T,P M,T,P M,T,P M,T,P

Door Thickness (mm) 27 to 57 25 to 57 40 to 95 35 to 57

Finish Options

Brass ●●●●● 40 - 95 30 35 - 57 15

Chrome ●●● ●

12 27 Other White

SS15 Door Security

Security for Hinged Doors WS6 WS16 WS12 WS14 WS6 Door Chain Security Features

13 • Simple to install and easy to use. Drill 48 Resistant • Helps to hold the door in the slightly open position, restraining against a force attack. Saw Resistant • Helps you to identify a caller before the 57 38 door is fully released. Tamper Resistant ● ●

Key Control

Guarantee 10 10 10 10

Features & Functions WS16 Combined Door Chain and Bolt Universal/Unique Key

• Integral steel dead bolt for additional security. 26 78 • Heavy Duty Chain helps protect against Approx. Angle of Vision cropping attack.

• Safe caller identification. 50 Key 50 Locking • Angled fixing screws help door restraint Method against a force attack. Manual ●● • Handy chain holder supplied as standard. Extended Key Option

Fitting Aids Supplied

Other Features

WS12 Hinge Bolts WS14 Hinge Bolts Door Specification

• Hinge bolts help keep the door in the frame on the • Hinge bolts help keep the door in the frame on the Door Material T T T T hinged side aiding protection against a force attack. hinged side aiding protection against a force attack. • Recommended for use in outward opening doors. • Recommended for use in outward opening doors. Door Thickness (mm)

25 Finish Options 24

19 13 Brass ●● 38 70 60 Chrome ●● 44 56 White Other Satin Brown

SS16 Door Security

Security for Sliding Doors 8K107 8K119 8K116 8K107 Sliding Door Lock Security Features

Suitable for securing single or double aluminium sliding doors. Drill • 30 30 Resistant • Simple push to lock action. • A key differing mechanism releases the lock (8K107 has 2000 Saw key variations). Resistant 36 • 8K107 features Tap-tite screws. 22 Tamper Resistant ●

30 Key Control KA F F

28 Guarantee 10 10 10

Features & Functions 8K119 Indicator Lock Universal/Unique Key Unique Unique Unique • Suitable for securing single or double aluminium sliding doors. • Simple push to lock action. 18 Approx. Angle of Vision • A key differing mechanism releases the lock. Key ● Locking Method 69 Manual ●●●

Extended Key Option

Fitting Aids Supplied DB 23 25 Other Features UI OS

8K116 Multi Purpose Door Bolt Door Specification

• Suitable for securing single or double aluminium Door Material M M M,T sliding doors by means of the steel locking bar. • Also suitable for hinged doors. 30 26 Door Thickness (mm) • Simple push to lock action. 52 • A key differing mechanism releases the bar from the frame. Finish Options

• Screws suitable for timber or metal doors supplied as standard. 41 144 Brass 82 30 8

Chrome ●● 10

White Other White Brown

SS17 Door Security

Security for Sliding Doors 8K122 8K122 Anti-Lift Device Security Features

Drill • Helps to prevent sliding patio doors from being lifted out of their Resistant frames. 77 • Easy to install. Saw Resistant • Variable thickness feature to enable fitting in most applications. 20 Tamper Resistant ●

10 15 Key 5 Control 5

Guarantee 10

Features & Functions

Universal/Unique Key

Approx. Angle of Vision

Variations Key Locking Keying Groups Method Manual • Many locks in the Chubb range have interchangeable keys and so can be conveniently operated from a single key. Locks Extended Key Option offering this option will have either a universal key operation OR a key alike reference which matches it to other products in Fitting Aids Supplied the same group; eg. the 8K113 is a unique key, in key alike group F, so it could be keyed alike to any other product in group F, like the 8K114. Other Features • For the complete list of Chubb product keying groups, see the Door Specification chart in the introduction section. Door Material M,P

Door Thickness (mm)

Finish Options

Brass

Extra Length Keys Chrome

• For applications where extended key lengths would be useful packs of extra long keys are available, see the price list for details. Other White

SS18 Access Control • • • • Electronic Strikes Motorised Locks Magnetic Locks Solenoid Locks • Accessories • AccessAccessReaders ControlControl Access Control

Access Control Index Introduction How to Specify Security Features

Chubb offers a very comprehensive range of Access Chubb have developed a series of icons to enable 1 • Introduction AC2 Control products. They cover readers and locks, the process of product specification to be Protected Section which together open up many options for simplified. Products are available as an option on a • Motorised Locks patented key section. Features and Functions AC3 electronically controlling peoples access. From today you can specifically detail your 2 Photo Gallery AC4 Keypads, Cardswipes and Proximity readers offer requirements for a product, therefore ensuring that Range Table AC5 methods of entry control which require people to Drill Resistant Motorised Locks AC6 it meets a particular standard or approval. punch in an access code, swipe a reader card or Hardened protection against drill attack. Control Unit AC6 In addition you can now ask for specific security offer up a proximity card or tag. features to be included in the product you specify. 3 • Solenoid Locks The locks are available as motorised and solenoid Features and Functions AC7 Example: If you require a keypad reader that has Saw Resistant variants that automatically withdraw the bolt. Hardened protection against saw attack. Photo Gallery & Range Table AC8 Electronic strikes which allow the release of a tamper resistance look for the screw driver icon Solenoid Locks AC9 (number 7) in the range. mortice or rim locks’ bolt from the frame. 4 • Electric Strikes Magnetic force that use magnetic force to lock the Chubb, Simplifying the Specification Process. Force Resistant Features and Functions AC10 door. Built in strength against force attack. Photo Gallery & Range Table AC11 Mortice Strikes AC12 5 Rim Strikes AC12 Chubb is accredited with and meets the Standards & Approvals Pick Resistant Built in protection to resist picking. • Magnetic Locks requirements of BS EN ISO 9001: 1994 The application of the CE mark is currently Features and Functions AC13 restricted to products covered by the low Photo Gallery AC14 voltage and EMC Directives. 6 Range Table AC15 Torque Resistant Surface Mounted Locks AC16-17 Built in strength against torque attack. Flush Mounted locks AC17 Brackets AC18 7 Tamper Resistant • Readers Built in protection against Tampering. Features and Functions AC19 Photo Gallery AC20 8 Range Table AC21 Corrosion Resistant Keypads AC22 Products conform to appropriate Card Readers AC23 anti-corrosion requirements. Proximity Readers AC23 Reader Cards AC24 9 Fire Resistant • Accessories Products conform to appropriate fire test Door Loop AC25 Motorised Locks Solenoid Locks Electric Strikes requirements. Power Supply 10 Release Button Escape Products for use on an escape door. • Notes AC26-27

Note: We have made every effort to ensure that at 11 the time of going to print all information shown in Key Control this catalogue is correct. However, in our efforts to The products can be included in a key continually improve our products and offer only the control system. highest levels of security and quality we reserve the right to make alterations to the product 12 specifications shown in this catalogue. All Guarantee dimensions provided within this catalogue are Products are guaranteed for a period of approximate and for guidance only. time. Magnetic Locks Readers Accessories

AC2 Access Control - Motorised Locks

What Type of Door ? Features and Functions

Input Voltage Control Output Corrosion Resistant • A comprehensive range of locks for both exterior Successfully completed a 96 and interior solid timber doors. All chubb motorised locks operate The locks are permanently hour salt spray test. on a 12Vdc power supply. controlled by the control unit which supplies the open and Guarantee Products carrying the CE mark Guarantee period applicable T close commands. comply to the requirements when used with original Chubb of the CE regulations. Cylinders and maintenance instructions followed. Auto Re-Lock Monitored Bolt If the door is in the closed The bolt position is position and has not monitored to allow the Door Types been opened after an control unit to identify T Solid Timber open command the bolt the lock status. will automatically re-lock. M Metal P PVCu

Key Overide At any time the bolt can be withdrawn or thrown • Can be used with outward opening doors. by a key when a Euro Alignment Locator profile cylinder is fitted To make sure the bolt is to the lock. always thrown into the strike, a special alignment locator is What is Backset? fitted to the lock faceplate and the strike.

Power Failure Mode • This is the measurement Any loss of electrical power will leave the lock in one of Bolt Options from the edge of the two modes: door to the centre of the FL SB keyhole. Fail Locked Door remains locked until Anti-Side Load ASL Swingbolt power is applied. This feature prevents pressure RTE Input Fail Unlocked FU applied to the door being DB A Request To Exit switch Door remains unlocked transferred to the bolt Deadbolt can be connected to the until power is applied. creating excess friction. controller.

Edge Finish: Chrome Plated Backset of door Ideal for Use with: Keypad / Cardswipe / Proximity Readers. ▼

AC3 Access Control - Motorised Locks

Motorised Locks Control Unit

Page CMLC1 AC6

Power Supply

Page Page Page CMLS1 AC6 CMLD1 AC6 CPS5 AC25

AC4 Security Features

Standards Features / Functions Door Features Finish Options Access Control Bolt Throw Input OutputCurrent Consumption Lock/Strike Automatic Key Monitored Power Other Case Case Face Plate Backset White Chrome mm Volatge Voltage Peak Holding Alignment Re-Locking Overide Bolt Failure Mode FeaturesDepth Width Width Corrosion Resistant Guarantee Motorised Locks

CMLS1 Mortice Swing Bolt ● ● 5 40 12Vdc 4A n/a ● 1 Sec. ●● FL 32mm 29mm 30mm 20mm ●

CMLD1 Mortice Dead Bolt ● ● 5 30 12Vdc 4A n/a ● 1 Sec. ●● FL ASL 82mm 25mm 30mm 50mm ●

Features / Functions Door Features

Bolt Throw Input OutputCurrent Consumption Open Signal Open Close Fault Other RTE Case Case Case mm Voltage Voltage Peak Holding Input Command Command Signal Features Input Depth Width Height Output Output Output Control Units

CMLC1 Single Door Unit ● 5 N/A 12Vdc 12Vdc 4A 80mA ●●ACCS ● BBF ● 55mm 125mm 85mm ●

Features / Functions

Bolt Throw Input Output Other Current mm Voltage Voltage Features Ouput Power Supply

CPS5 Power Supply ● 1 N/A 240Vac 12Vdc BBF 5A 80mm 330mm 330mm ●

Key: ASL = Anti -Side Load ACCS = Automatic Continuous Close Signal BBF = Battery Backup Function FL = Fail Locked

AC5 Access Control - Motorised Locks

Motorised Locks CMLS1 CMLD1 CMLC1 CMLS1 Mortice Swing Bolt CMLD1 Mortice Dead Bolt Standards

• For use on single doors where bolt release is to be • For use on single doors where bolt release is to ●●● electronically controlled. be electronically controlled. • Must be used with the controller unit. • Must be used with the controller unit. Security Features

Corrosion ●● 151mm Resistant

111mm Guarantee 555

111mm Features/Functions

236.5mm Bolt Throw (mm) 40 30 n/a 440mm Input Voltage 12Vdc 12Vdc 12Vdc 66mm 30mm 17mm 440mm 40mm 216mm Output Voltage 12Vdc 12Vdc 12Vdc 129mm 70mm 140 Current Peak 4A 4A 4A 232mm 17mm 75mm Consumption Holding n/a n/a 1 14mm 12mm 82mm Lock/Strike Alignment ● ● n/a 35mm 129mm Automatic Re-locking 1 Sec. 1 Sec. n/a 3mm 49mm 30mm 30mm Key Overide ● ● n/a

50mm ● ● 30mm 3mm Monitored Bolt n/a 82mm 3mm 30mm Power Failure Mode FL FL n/a 29mm 29mm Open Signal Input n/a n/a ● Open Command Output n/a n/a ● Close Command Output n/a n/a ACCS Fault Signal Output n/a n/a ● Control Unit Other Features ASL BBF RTE Output n/a n/a ● CMLC1 Single Door Unit Door Features

• Used for controlling the Motorised Locks. Case Depth (mm) 32 82 55 • Option to run off of battery back-up in case of power failure Case Width(mm) 29 25 125 • Connection to Access Control Reader device available such as a keypad for external operation. Face Plate Width (mm) 30 30 20 50 • Automatic Continuous Close Signal sent to the lock, and close 85mm Backset (mm) signal sent after 8 seconds if the open command is sent but Chrome the door is not opened. Finish Options • Connection to request to exit button available for internal ● White operation. 125mm 55mm • Emergency status output. • For connection to an external alarm device (eg a sounder). Chrome ● ●

AC6 Access Control - Solenoid Locks

What Type of Door ? Features and Functions

• A comprehensive range of locks for both exterior Auto Re-Lock Input Voltage Corrosion Resistant and interior doors. Successfully completed a 96 If the door is in the closed All Chubb soleniod bolts operate hour salt spray test. T M P position and has not been on a 12Vdc power supply. opened after an open Products carrying the CE mark Escape command the bolt will comply to the requirements The fail Unlocked version of this lock is ideal for use on escape of the CE regulations. automatically re-lock. Monitored Bolt doors if used with a micro switched panic bar. The bolt position is monitored to allow the control unit to Guarantee identify the lock status. Guarantee period applicable when used with original Chubb Cylinders and maintenance Power Failure Mode instructions followed. Any loss of electrical power will leave the lock in one of two modes: Door Types Fail Locked FL T Solid Timber Door remains locked until • Variants available for outward M Metal power is applied. Fail Unlocked FU Bolt Options opening doors. P PVCu Door remains unlocked DB until power is applied. Deadbolt

What is Backset? LB Latchbolt Key Overide At any time the bolt can be withdrawn or thrown • This is the measurement by a key when a Euro from the edge of the profile cylinder is fitted door to the centre of the to the lock. Tkeyhole. = Timber GP = Glass Panelled M = P = PVCu

Power Rating Door Status RTE Input The lock is continuously rated Built in Magnetic contact A Request To Exit switch allowing the lock to be held in senses the door open / closed can be connected to the the constantly open position. status for bolt re-locking. controller.

Edge Finish: Chrome Backset of door Ideal for Use with: Keypad / Cardswipe / Proximity Readers. ▼

AC7 Access Control - Solenoid Locks

Solenoid Bolts Power Supply

Page Page Page CSDB100 • CSDB100U AC9 CSLB200 AC9 CPS3 AC25

Security Features

Finish Standards Features / Functions Door Features Options Access Control Bolt RTE InputCurrent Consumption Power Open Automatic Key Monitored Power Other Case Case Face Plate Backset Chrome Throw Input Voltage Peak Holding Rating Signal Re-Locking Overide Bolt Failure Features Escape Depth Width Width Corrosion Resistant Guarantee (mm) Input Mode Solenoid Locks

CSDB100 Mort. Solenoid D/Bolt ● ● 1 22 ● 12/24Vdc 3A/1.8A 250mA C ● 1 Sec. ●●FL 35mm 22mm 25mm 25mm ●

CSDB100U Mort. Solenoid D/Bolt ● ●●1 22 ● 12/24Vdc 3A/1.8A 250mA C ● 1 Sec. ●●FU 35mm 22mm 25mm 25mm ●

CSLB200 Mort. Solenoid L/Bolt ● ● 1 16.5 ● 12/24Vdc 3A/1.8A 250mA C ● 6 Sec. ●●FL 35mm 22mm 25mm 25mm ●

Key: FL = Fail Locked FU = Fail Unlocked C = Constant

Security Features

Finish Standards Features / Functions Door Features Options

Input Output Other Current Case Case Case osion White Volatge Voltage Features Output Depth Width Height

Resistant Guarantee Power Supply

● CPS3 Power Supply 5 240Vac 12Vdc BBF 3A 80mm 250mm 215mm ●

Key: BBF = Battery Backup Function AC8 Access Control - Solenoid Locks

Solenoid Locks CSDB100 CSDB100U CSLB200 CSDB100 • CSDB100U Mortice Solenoid Deadbolt CSLB200 Mortice Solenoid Latch Bolt Standards

●●● • For use on a single door where bolt release • For use on a single door where bolt release is to be electronically controlled. is to be electronically controlled. Security Features • Narrow style lock case. • Narrow style lock case. Connection to an access control reader • • Connection to an access control reader Corrosion ●●● device , such as a keypad, for external device , such as a keypad, for external Resistant operation. operation. • Connection to a request to exit button for • Connection to a request to exit button for Escape ● internal operation. internal operation. • CSBD100 - Fail Locked. • Fail Locked. CSBD100U - Fail Unlocked. • Guarantee 111

Features/Functions

Bolt Throw (mm) 20 20 18

RTE Input ● ● ●

45mm 45mm Input Voltage 12/24Vdc 12/24Vdc 12/24Vdc

Current Peak 3A/1.8A 3A/1.8A 3A/1.8A 44.4 44.4 52mm 52mm Consumption Holding 250mA 250mA 250mA

Power Rating C C C 18mm 320mm 160mm 320mm 160mm 21mm 18mm 21mm Open Signal Input ● ● ● 22mm

16.5mm Automatic Re-Locking 1 Sec. 1 Sec. 6 Sec. 94.6 94.6 230mm 230mm Key Overide ● ● ●

2.5mm ● ● ● 25mm Monitored Bolt Power Failure Mode FL FU FL 2.5mm 25mm 45mm Other Features

45mm Door Features 25mm

35mm Case Depth (mm) 35 35 35 25mm Case Width(mm) 22 22 22 25mm 35mm Face Plate Width (mm) 25 25 25 25mm

22mm Backset (mm) 25 25 25

Finish Options

22mm Chrome ● ● ●

AC9 Access Control - Electric Strikes

What Type of Door ? Features and Functions

• A comprehensive range of strikes for both exterior Holding Force Input Voltage Force Resistant and interior doors. Strong bolt design provides A measurement is given (kg) All Chubb strikes operate on a resistance to side load force. for the amount of sideload an 12Vdc power supply. T M P electric strike will take and Products carrying the CE mark Tamper Resistant comply to the requirements When the door is locked, all hold the door locked. fixings are hidden. of the CE regulations. Corrosion Resistant Release Operation Successfully completed a 96hour salt spray test. Connection of a reader, such as a keypad, allows the strike Escape to be released on entry. The fail Unlocked version of this strike is ideal for use on escape doors if used with a micro switched panic bar.

Guarantee Guarantee period applicable when Chubb maintenance instructions are followed. Door Types T Solid Timber M Metal P PVCu

Operation Power Failure Mode Any loss of electrical power will • When the strike is released it allows the door to be leave the strike in one of two pushed, forcing the bolt of the strike to open. modes: Power Rating Fail Locked FL The strike is continuously rated allowing it to be held in Door remains locked until power is Handing the constantly open position. applied. All Chubb strikes are Fail Unlocked FU reversible to suit either left or Door remains unlocked until power right handed doors. is applied.

Finishes: Dark Metallic Grey Brass

IDEAL FOR USE WITH:Mortice Locks, Rim Locks, Keypad / Cardswipe / Proximity Readers ▼

AC10 Access Control - Electric Strikes

Electric Strikes

Page Page CMES400 • CMES400U AC12 CRES100 • CRES100U AC12

Security Features

Door Finish Standards Features / Functions Features Options Access Control InputCurrent Consumption Power Open Signal Holding Power Other Handing Inward DMG Brass Force Tamper Escape Voltage Peak Holding Rating Input Force Failure Mode Features Opening Corrosion Resistant Resistant Resistant Guarantee Electric Strikes ● ● CMES400 Mort. Electric Strike ● ●●● 1 12/24Vdc 300mA 300mA C ● 400kg FL REV

● ● CMES400U Mort. Electric Strike ● ●●●●1 12/24Vdc 300mA 300mA C ● 400kg FU REV

● ● ● CRES100 Rim Electric Strike ● ●●● 1 12/24Vdc 300mA 300mA C ● 380kg FL REV

● ● ● CRES100U Rim Electric Strike ● ●●●●1 12/24Vdc 300mA 300mA C ● 380kg FU REV

Key: FL = Fail Locked FU = Fail Unlocked REV = Reversible Handing C = Constant

AC11 Access Control - Electric Strikes

Electric Mortice Strikes CMES400 CMES400U CRES100 CRES100U CMES400 • CMES400U Standards

• For use with a mortice latch. ●●●● • Continuously rated. • For inward opening door applications. Security Features • Metal shroud around release latch for tidy Force installation. Resistant ●●●● CMES400 - Fail Locked. • Tamper • CMES400U - Fail Unlocked. Resistant ●●●●

30 mm 30 mm Corrosion 69 mm 150 mm Resistant ●●●●

Escape ● ●

Guarantee 1111

Features/Functions 10 mm 16 mm 28 mm Input Voltage 12Vdc 12Vdc 12Vdc 12Vdc

Peak 300mA 300mA 300mA 300mA Current Consumption Holding 300mA 300mA 300mA 300mA Electric Rim Strikes Power Rating C C C C

CRES100 • CRES100U Open Signal Input ● ● ● ● • For use with a rim nightlatch. Automatic Locking 1 Sec 1 Sec 1 Sec 1 Sec • Continuously rated. Side Load Force 400kg 400kg 380kg 380kg • For inward opening door applications. Resistance 28 mm 31 mm • CRES100 - Fail Locked. Power Failure Mode FL FU FL FU • CRES100U - Fail Unlocked. Other Features REV REV REV REV

Door Features 104 mm 40 mm Handing REV REV REV REV 80 mm 106 mm

Inward Opening ● ● ● ●

Finishes

DMG 63 mm 47 mm

Brass

AC12 Access Control - Magnetic Locks

Door Types Features and Functions

Fixing Types Input Voltage Corrosion Resistant Successfully completed a 96hr Surface Mount Single voltage units accept a salt spray test. Magnet is fixed to the door 12Vdc power supply. transom. Products carrying the CE mark Escape Dual voltage units accept either The Magnetic Locks are ideal for comply to the requirements Flush Mount a 12Vdc or 24Vdc power supply. use on escape doors if used with of the CE regulations. a micro switched panic bar. Magnet is morticed into the door and frame or transom. Guarantee Single Door Single Door with Full Guarantee period applicable Width Housing when Chubb maintenance instructions are followed.

Power Failure Mode Any loss of electrical power will leave the magnet in the fail unlocked state. Fixing Brackets A range of brackets and accessories are available Double Door to suit most applications. Z & L Brackets for inward opening Installation Options applications.

Outward Opening Outward Opening

Frame Frame 100mm wide 75mm wide Monitoring Magnets are available in two states: Monitored M Door Door A 2 wire output from a 24v, 1amp volt free change over contact allows a signal to be sent to a relay or Holding Force Adjustable Transom control device to show that the magnet is in the A measurement is given (in kgs) Bracket for applications Outward Opening Inward Opening fully locked or unlocked state (hall effect). for the amount of direct force a with a narrow frame or Adjustable Unmonitored U magnetic lock will take and hold no frame reveal. transom Frame Frame bracket No signal is available to show the status of magnet. the door locked. 50mm wide

Door Z bracket Finishes: Satin Silver Anodised Door IDEAL FOR USE WITH:Keypad / Cardswipe / Proximity Readers ▼

AC13 Access Control - Magnetic Locks

Magnetic Locks - Surface Mounted

Page CM1DSU • CM1DSM AC16

Page Page CM1SSU • CM1SSM AC16 CM2DSU-2M • CM2DSM-2M AC17

Magnetic Locks - Surface Mounted Shear Locks - Flush Mounted

Page Page Page CM2SSU-1M • CM2SSM-1M AC16 CM3SSU • CM3SSM AC17 CM4SSM • CM4SFM AC17

AC14 Access Control - Magnetic Locks

Security Features

Finish Standards Features / Functions Door Features Options

Satin Access Control Holding Monitoring Type Input Voltage Current Consumption (Per Coil) Power Fixing Type Case Case Case Silver Force (kg) Failure Mode Escape Monitored Unmonitored Peak Holding Surface Flush Length Height Anodised Corrosion Resistant Guarantee Magnetic Locks

CM1SSU1M Single Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 280mm 33mm 44mm

CM1SSM Single Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 280mm 33mm 44mm

CM1DSU2M Double Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 540mm 33mm 44mm

CM1DSM Double Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 540mm 33mm 44mm

CM2SSU-1M Single Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 1000mm 33mm 44mm

CM2SSM-1M Single Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 2000mm 33mm 44mm

CM2DSU-2M Double Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 2000mm 33mm 44mm

CM2DSM-2M Double Magnet 5 Up to 310 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 2000mm 33mm 44mm

CM3SSU Single Magnet 5 Up to 630 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 267mm 73mm 40mm

CM3SSM Single Magnet 5 Up to 630 12Vdc/24Vdc 250mA/500mA 250mA/500mA FU 267mm 73mm 40mm

CM4SSM Single Shear Magnet 5 Up to 1000 12Vdc/24Vdc 900mA/1200mA 450mA/280mA FU 180mm 30mm 25mm

CM4SSM Single Shear Magnet 5 Up to 1000 12Vdc/24Vdc 900mA/1200mA 450mA/280mA FU 180mm 30mm 25mm

Key: FU = Fail Unlocked

AC15 Access Control - Magnetic Locks

Magnetic Locks - Surface Mounted CM1SSU/M CM1DSU/M CM2SSU-1M/M CM1SSU • CM1SSM Standards

• For use on single doors. ● ●● • Surface mount (super mini) design. 272 33 Security Features • Variable cable entry position. Corrosion ● ●● • Suits Inward and outward opening 44 44 Resistant doors. • Dual voltage capability. Escape ● ●● • CM1SSU - Unmonitored. 40 • CM1SSM - Monitored. 12 Guarantee 555

Features/Functions CM1DSU • CM1DSM Hoding Force (kg) Up to 310 Up to 310 Up to 310

• For use on double doors. • Dual voltage capability. ● ● ● Monitoring Monitored • Surface mount (super mini) design. • CM1DSU - Unmonitored. Type Unmonitored ● ● ● • Variable cable entry position. • CM1DSM - Monitored. • Suits Inward and outward opening doors. Input Voltage 12Vdc/24Vdc 12Vdc/24Vdc 12Vdc/24Vdc 540 33 Current Peak 250mA/500mA 250mA/500mA 250mA/500mA Consumption 44 44 (Per Coil) Holding 250mA/500mA 250mA/500mA 250mA/500mA

Power Failure Mode FU FU FU 40 40

12 12 Other Features

CM2SSU-1M • CM2SSM-1M Door Features Surface ● ● ● • For use on single doors. Flush • Surface mount (super slim) design. • 1m housing length for full door Case Length (mm) 280 540 1000 width fitting. Case Height (mm) 33 33 33 • Suits Inward and outward opening doors. 1000 33 Case Depth (mm) 44 44 44 • CM2SSU - Unmonitored. 44 44 Finish Options • CM2SSM - Monitored.

40 ●● Satin Silver Anodised ● 12

AC16 Access Control - Magnetic Locks

Magnetic Locks - Surface Mounted CM2DSU-2M/M CM3SSU/M CM4SSM/FM CM2DSU-2M • CM2DSM-2M Standards

• For use on double doors. ● ●● 33 Surface mount (super slim) design. 2000 • Security Features • 2m housing length for full door 44 44 width fitting. 40 Corrosion ● ●● 40 Resistant • Suits Inward and outward opening 12 12 doors. ● • CM2DSU-2M - Unmonitored. Escape ●● • CM2DSM-2M - Monitored.

Guarantee 5 55

CM3SSU • CM3SSM Features/Functions

• For use on single doors. 267 40 Hoding Force (kg) Up to 310 Up to 630 Up to 1000 Surface mount (super power) design. • ● ● ● Monitoring Monitored • Unmonitored. 73 73 Type ● ● • Suits Inward and outward opening Unmonitored doors. Input Voltage 12Vdc/24Vdc 12Vdc/24Vdc 12Vdc/24Vdc • CM3SSU - Unmonitored. Current Peak 250mA/500mA 250mA/500mA 900mA/1200mA • CM3SSM - Monitored. 63 Consumption (Per Coil) Holding 250mA/500mA 250mA/500mA 900mA/1200mA 12 Power Failure Mode FU FU FU

Other Features Shear Locks - Flush Mounted Door Features CM4SFU • CM4SFM Surface ● ● CM4SSM For use on single or double doors. 25mm • 163mm Flush CM4SFM • Flush mount (shear force) design for Case Length (mm) 2000 267 163 improved holding force (1000kg of 30mm shear force). Case Height (mm) 33 73 30 • Suitable for Inward or outward opening doors or bi-directional doors. 25mm Case Depth (mm) 44 40 25 • Can be fitted in the horizontal or 163mm vertical axis. Finish Options 30mm • CM4SSM - Surface Mount. ●●● • CM4SFM - Flush Mount. Satin Silver Anodised

AC17 Access Control - Magnetic Locks

Magnetic Lock Brackets & Accessories Z and L Brackets

• Suitable for use on inward opening doors. A Z Bracket A B C D CZB1 190mm 50mm 50mm 100mm CZB3 190mm 75mm 75mm 150mm B • CZB1 - For use with CM1 and CM2 magnets.

D • CZB3 - For use with CM3 magnets.

C

A L Bracket A B C CLB1 250mm 50mm 38mm CLB3 266mm 75mm 38mm B • CLB1 - For use with CM1 and CM2 magnets. • CLB3 - For use with CM3 magnets. C

Adjustable Transom Bracket Accessories

• Bracket allows adjustable positioning of the magnet. Adjustable Transom Bracket A B C • Adhesive for glass mounting. • Suitable for applications witha flush door and a frame CADJTB for CM1, 2+3 266mm 50mm 38mm (CMADHESIVE) with little or no reveal. (CMACTIVATOR)

C

B

A

AC18 Access Control - Readers

Features and Functions

Non Volatile Memory Tamper Resistant Reader Systems Security screws and anti-tamper Cardswipe Reader This means the programmed switches help secure the units. information in the reader is Pre-encoded magnetic stripe cards control retained in the event of Products carrying the CE mark Corrosion Resistant access. comply to the requirements of Successfully completed testing power loss. to ISP53 weather protection. the CE regulations. Keypad Guarantee Push button coded entry controls access. Guarantee period applicable when used with original Chubb Proximity Reader cards, tags and maintenance instructions followed. Pre-encoded cards or tags placed near the reader control access.

Programming Method Programming the readers is achieved via the keypad or with use of the program card.

Hold Open Input Voltage RTE Input The reader can send an output signal to hold the All chubb Readers operate Connection of a on a 12Vdc power supply. door in the open position for Request to Exit switch a required length of time. will allow for instant egress operation without the use of a card, code or tag. Hierarchy There are two levels of operation: Master Status Display Visual Display The reader operates Alarm Output stand alone. LED’s show the status of the reader. The connection of a Slave warning device (a bell) Number of Users The reader is ‘dumb’ and Audible Display allows the output to Each system has a limit Power Failure Mode Capability requires connection to a Tones announce the trigger it in the event of an of programmable Readers can support fail locked master controller. status of the reader. alarm status. codes for users. and fail unlocked systems.

Finishes: Dark Metallic Grey Dark Grey

IDEAL FOR USE WITH: Motorised Locks, Solenoid Locks, Electric Strikes, Magnetic Strikes. ▼

AC19 Access Control - Readers

Keypads Card readers

Page Page Page CEK200 AC22 CIK100 • CSK150 AC22 CMC400 • CSC450 AC23

Proximity Reader Cards and Tags

Page Page CPX100 AC23 CPX10UCP • CPX10MC • CPX10T • CICP • CUCP • CCPC AC24

AC20 Access Control - Readers

Security Features

Door Finish Standards Features/Functions Features Options Access Control Doors Number Hierachy Programming Input Current Hold RTE Alarm Status Power Failure Retentive Lock release Incorrect Door Reader DMG DG Controlled of Users Master Slave Method VoltageConsumption Open InputOutput Time Visual AudibleCompatability Memory Code Contact Range Keypad Single Multi Keypad Card Peak Hold Output Output FL FU Lockout Monitoring

CEK200 External Keypad ● ●● 5 ● 4 codes ● ● 12Vdc 40mA 40mA 12Vdc ● ● ● ● ● ● ● ● 3, out Contact ●

CIK100 Internal Keypad ● 5 ● 4 codes ● ● 12Vdc 40mA 40mA 12Vdc ● ● ● ● ● ● ● ● 3, out Contact ●

CSK150* Slave Keypad ● ● 5 ● 4000 ● ●●12Vdc 90mA 90mA n/a ● ● ● ● ● ● 3, out Contact ●

Cardswipe

CMC400 Card Reader ● ● ● 5 ● 10 4000 ● ●12Vdc 40mA 40mA 12Vdc ● ● ● ● ● ● 3, out Contact ●

CSC450* Slave Card Reader ● ● ● 5 ● 10 4000 ● ●12Vdc 30mA 30mA 12Vdc ● ● ● ● ● ● 3, out Contact ●

Proximity

CPX100 Proximity Reader ●●5 ● 2000 ● ● 12Vdc 200mA200mA200mA ●● ● ●● ● ● 6, out ● Up to ● 20cm

*Note - Features & Functions when connected to a Master reader. For information on Cards and Tags see page AC24.

AC21 Access Control - Readers

Keypads CEK200 CIK100 CSK150 CEK200 Standards

• Ideal for External and Internal use. ● ●●

• Robust design with hardwearing Security Features stainless steel buttons. Corrosion ● • Weather protected to IP53 rating. Resistant 128 mm • low current option available for powering from batteries. Tamper ●● Resistant

Guarantee 5 55

41mm 70mm Features/Functions

Number of Users 4 codes 4 codes 4000 CIK100 Master ●● Hierachy Slave ● • Ideal for Internal use or in areas Keypad ●●● sheltered from the weather. Programming Method Card ● Hardwearing zinc alloy casing. • Input Voltage 12Vdc 12Vdc 12Vdc • Low current option available for Current Peak 40mA 40mA 90mA 128 mm Consumption powering from batteries. Holding 40mA 40mA 90mA Hold Open Output 12Vdc 12Vdc n/a RTE Input ●●● Alarm Output ●● Lock Release Time Ouput ●● Status Visual 41mm 70mm ●●● Supply Audible ●●● Power Faliure Fail Locked ●●● Compatability CSK150 Fail Unlocked ●●● Retentive Memory ●●● • Slave keypad for use with the Incorrect Code Lockout CMC400 to give the added secuity of Door Contact Monitoring 3, out 3, out 3, out the requirement for both a card and Reader Range code on entry. Contact Contact Contact • Hardwearing zinc alloy casing. 128 mm Door Features

Doors Single ●●● Controlled Multi

Finish Options

●●● 41mm 70mm DMG DG

AC22 Access Control - Readers

Card Readers CMC400 CSC450 CPX100 CMC400 Standards

• Ideal for Internal use or areas sheltered ● ●● from the weather. 35 mm Security Features • Pr-wired cable with reader for easy fit. • Simple programming from cards, no Corrosion ● ● need for programming devices or Resistant centrally controlled computers. 128 mm 125 m Tamper ●● • Master card reader (built in controller). 128 mm Resistant

Guarantee 5 55

38 mm 50 mm Features/Functions

Number of Users 4000 4000 2000 CSC450 Master ●● Hierachy Slave ● • Ideal for Internal use or areas sheltered Programming Keypad ● from the weather. 35 mm Method Card ● ● Slave card reader (requires connection • Input Voltage 12Vdc 12Vdc 12Vdc to a controller, such as the CMC400). Current Peak 40mA 40mA 200mA Consumption • Ideal for Internal use or areas sheltered Holding 30mA 30mA 200mA from the weather. Gives cost effective Hold Open Output 12Vdc 12Vdc 200mA card swipe access from both sides of a 128 mm 125 m 128 mm RTE Input door when linked with the CMC400. ● Alarm Output ● Lock Release Time Ouput ●●● Status Visual ●●● Supply Audible 38 mm 50 mm ●●● Power Faliure Fail Locked ●●● Compatability Fail Unlocked ●●● Proximity Reader Retentive Memory ●● Incorrect Code Lockout CPX100 Door Contact Monitoring 3, out 3, out 6, out Reader Range ●

15mm • Ideal for external and Internal use. 86mm Contact Contact Up to 20cm 60mm Pre-wired cable with reader for easy fit. • Door Features • Simple programming from cards, no need for programming devices or centrally Doors Single ●●● Controlled controlled computers. 86mm Multi 10 10

• Master Proximity reader (built in Finish Options controller). DMG ●● • Includes ‘start up’ quantity of Master and ● User Cards/tokens. DG

AC23 Access Control - Readers

Card Reader Cards Cards are availabe in packs for the CMC400 and CSC450

Initialisation Pack CICP This pack consists of two identical cards used to initialise the reader after installation. The card can be swiped through multiple readers enabling them to function as an integral system.

User Card Pack CUCP This pack consists of one program card and a set of user cards. Swiping the program card through a reader validates all the user cards in the pack. Cards are available in pack sizes of 20 or 50 cards. In every pack, a user card has a corresponding shadow card. As user cards are issued, the user identification is written on the shadow card and stored in a safe place. Swiping a shadow card eliminates its corresponding user card from the reader. Useful when a user card is lost or stolen.

Control Card Pack CCCP This pack of cards extends the flexibility of the system and is needed for the following functions; Hold open, Lock open time 10 seconds, Lock open time 4 seconds, Fail Locked/Fail Unlocked, Mute, Keypad code settings (for slave keypad when used with a master card reader), and Card Reader and keypad (to allow the master card reader to operate alongside a slave keypad, only allowing entry with the correct card and access code).

Proximity Reader Cards and Tags CPX10UCP • CPX10MC • CPX10T The reader is supplied with 10 user cards or tokens and 2 master cards for programming. Additional Cards or Tags are available for the CPX100 (Sold individually).

Notes

AC24 Access Control Accessories

Accessories Release Button CRB Door Loop CDL Power Supply CPS3 • CPS5 CPS3 • Used for remote release of the motorised locks. • Used to connect frame mounted units to the motorised locks. • Red/Green light signal of lock status. • Mortice casing for added protection with flexible stainless • Used to power the Solenoid locks. steel spring for wiring. • 3A current output. CPS5 25mm • Used to power the Motorised locks. • 5A current output.

83mm 55mm • Both models have built in accommodation for backup battery to supply temporary power in cases of mains failure.

95mm 330mm

17mm

Security Features

Standards Features / Functions Door Features Finish Options Access Control Input Output Other Current Case Case Case osion White Chrome Voltage Voltage Features Output Depth Width Height esistant Guarantee Accessories

CRB Release Button 5 240Vac LSL ●

CDL Door Loop 10 12Vdc 12Vdc ●

● CPS3 Power Supply 5 240Vac 12Vdc BBF 3A 80mm 250mm 215mm ●

● CPS5 Power Supply 5 240Vac 12Vdc BBF 5A 80mm 330mm 330mm ●

Key: LSL = Lock Status Lights (Red/Green) BBF = Battery Backup Function

AC25 `•Stainless Steel

• Brass

• Nylon

• Aluminium Fittings Furniture &

Furniture & Fittings Furniture & Fittings

Furniture & Fittings Index Introduction How to Specify Security Features

Chubb offers a very comprehensive range of Chubb have developed a series of icons to enable 1 • Introduction FF2 Furniture and Fittings. Lever handles are available the process of product specification to be Protected Section Stainless Steel in various forms to offer both contemporary and simplified. Products are available as an option on a • Features and Functions FF3 patented key section. classic styles. A large range of finishes offer the From today you can specifically detail your • Photo Gallery FF4 2 ability to match other products on a door - such as requirements for a product, therefore ensuring that • Range Table FF5 door closers or panic hardware. it meets a particular standard or approval. Drill Resistant Lever Handles The Fittings range includes pull handles, roses and Hardened protection against drill attack. In addition you can now ask for specific security • Return to Door FF6 escutcheons, push plates, door stops, and various features to be included in the product you specify. 3 • Straight FF6 accessories. Saw Resistant Fittings FF7 - FF8 Designed to last, the furniture and fittings range Chubb, Simplifying the Specification Process. Hardened protection against saw attack. are available made from Stainless Steel, Brass, Brass Nylon or Aluminium. 4 • Features and Functions FF11 • Photo Gallery FF12 Force Resistant Standards & Approvals Built in strength against force attack. • Range Table FF13 Chubb is accredited with and meets Lever Handles the requirements of BSEN9001 Products that meet PSAMOBH3PS have been tested to 5 • Round Bar FF14 the performance specifications issued by the Property Pick Resistant Services Agency. • Georgian Style FF14 Built in protection to resist picking. • Victorian Style FF15 6 Fittings FF16 - FF19 Torque Resistant Nylon Built in strength against torque attack. • Features and Functions FF20 7 • Photo Gallery & Range Table FF21 Lever Handles Tamper Resistant Built in protection against Tampering. • Round Bar FF22 Fittings FF22 - FF26 8 Corrosion Resistant Aluminium Products conform to appropriate • Features and Functions FF27 anti-corrosion requirements. • Photo Gallery FF28 9 • Range Table FF29 Stainless Steel Brass Fire Resistant Products conform to appropriate fire test Lever Handles requirements. • Round Bar FF30 10 • Straight FF30 Escape • Large Backplate FF31 Products for use on an escape door. Fittings FF32 - FF35

Note: We have made every effort to ensure that at 11 the time of going to print all information shown in Key Control this catalogue is correct. However, in our efforts to The products can be included in a key continually improve our products and offer only the control system. highest levels of security and quality we reserve the right to make alterations to the product 12 specifications shown in this catalogue. All Guarantee dimensions provided within this catalogue are Products are guaranteed for a period of approximate and for guidance only. time. Nylon Aluminium

FF2 Furniture - Stainless Steel

Styling Features and Functions

The furniture is available in two styles: Fixing Types Concealed Fixing Guarantee Guarantee period applicable when The furniture can be fixed to the Some products feature clip on cover original Chubb maintenance door in two ways. plates which cover the fixings. instructions are followed. Rose Style Bolt Through The handle and The inside and outside furniture cylinder escutcheon are bolted together with a pair of special bolts that pass through the Products that meet MOBH3PS have are available been tested to the performance lock and door. separately on a rose. specifications issued by the Property Face Fix Services Agency. The furniture is screw fixed to the surface of the door.

Backplate Style Lever Furniture Variations The handle and The furniture is available to suit cylinder cut out are mortice locks and latches, either on a single backplate. using roses and escutcheons or backplates - lever key, euro profile, oval profile, bathroom and latch types are included. Latch (LA) Handle Fixing For use with tubular latches. Round bar levers are fixed to the Lever Lock (LO) spindle with a grubscrew. For use with mortice locks operated by a lever key. Spindle Fixings Euro (PE) All furniture is supplied with an All fixings, such as screws and bolts are supplied. For use with cylinder mortice locks 8mm spindle. operating with a Euro Profile cylinder Springing Oval (PO) What are Centres? Sprung For use with cylinder mortice locks • This is the measurement The lever returns to the rest operating with an Oval Profile position irrespective of any spring cylinder. from the centre of the action in the lock. Bathroom (PB) ‘follower’, which operates Unsprung the handles, to the centre For use with mortice locks that The lever returns to rest on the incorporate a spindle of the keyhole. Centres spring action of the lock only. thrown deadbolt. • In the UK this is commonly 57mm, although other Finish: Satin Stainless Steel Polished Stainless Steel sizes are available. Ideal for use with: Mortice locks & latches ▼

FF3 Furniture - Stainless Steel

Lever Handles - Return to Door Lever Handles - Straight

Page Page Page CS400 RangeFF6 CS402 Range FF6 CS403 Range FF6

Page Page Page CS400RRS FF6 CS402RRS FF6 CS403RRS FF6

FF4 Security Features

Features / Functions Finish Options Furniture & Fittings Styling Variation Fixing Concealed Springing SSS PSS Backplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung

Lever Handles - Return to Door CS400RRS 20mm Round Bar handle 5 CS400LA 20mm Round Bar handle 5 57mm CS400LO 20mm Round Bar handle 5 48mm CS400PE 20mm Round Bar handle 5 5 48mm CS400PO 20mm Round Bar handle 5 57mm CS400PB 20mm Round Bar handle

Lever Handles - Straight

CS402RRS 20mm Round Bar handle 5

CS402LA 20mm Round Bar handle 5

CS402LO 20mm Round Bar handle 5 57mm CS402PE 20mm Round Bar handle 5 5 48mm CS402PO 20mm Round Bar handle 5 CS402PB 20mm Round Bar handle 5 48mm CS403RRS 20mm Shaped Round Bar Handle 5 CS403LA 20mm Shaped Round Bar Handle 5 57mm CS403LO 20mm Shaped Round Bar Handle 5 CS403PE 20mm Shaped Round Bar Handle 5 CS403PO 20mm Shaped Round Bar Handle 5 CS403PB 20mm Shaped Round Bar Handle

FF5 Furniture - Stainless Steel

Lever Handles - Return to Door 20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

• Ideal for heavy duty applications. 44mm 67mm • Ideal for heavy duty applications.

52mm 8mm Model Centres 20mm 165mm 20mm CS400LA n/a CS400LO 57mm 67mm CS400PE 48mm 8mm CS400RRS CS400LO CS400PE CS400PO CS400PB CS400PO 48mm CS400PB 57mm 140mm CS400LA 140mm Lever Handles - Straight 20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

• Ideal for heavy duty applications. 44mm 67mm • Ideal for heavy duty applications.

52mm 8mm Model Centres 20mm 165mm 20mm CS402LA n/a CS402LO 57mm 67mm 8mm CS402PE 48mm CS402LO CS402PE CS402PO CS402PB CS402RRS CS402PO 48mm CS402PB 57mm 130mm CS402LA 130mm

20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

• Ideal for heavy duty applications. 44mm 59mm • Ideal for heavy duty applications.

52mm 8mm Model Centres 20mm 165mm 20mm CS403LA n/a CS403LO 57mm

67mm 8mm CS403PE 48mm CS403RRS CS403LO CS403PE CS403PO CS403PB CS403PO 48mm

CS403PB 57mm 124mm CS403LA 125mm

FF6 Fittings - Stainless Steel

Fittings Escutcheons & Turn Indicator Cylinder Pulls

• Ideal for use with the round rose handle. • Ideal for heavy duty applications.

52mm

52mm 78mm 78mm 7mm CS416TU CS416LO 7mm

CS448B 43mm CS448R 43mm

52mm 52mm 78mm 78mm

CS416PE CS416PO 7mm 7mm CS448E 43mm CS448O 43mm

Pull Handles Pull Handles

• Bolt Fix. • Back to Back Fix.

60mm 60mm

A 19mm 19mm A

Model A Model A CS417/1BF 150mm CS419/1BB 150mm CS417/2BF 225mm CS419/2BB 225mm CS417/3BF 300mm CS419/3BB 300mm

FF7 Fittings - Stainless Steel

Fittings Pull Handles Pull Handles

• Pull handle mounted on Backplate, Screw Fix. • Concealed Fix. 52mm

B A A CS320/1P 19mm

Model A B C Model A CS420/1P 165mm 150mm 155mm CS418/1CF 150mm CS420/2P 300mm 225mm 75mm CS418/2CF 225mm CS420/3P 350mm 300mm 75mm CS418/3CF 300mm C

Letter Plate & Door Tidy Towel Rail

100mm

CS450

332mm CS452 600mm

75mm

52mm CS453 300mm

FF8 Fittings - Stainless Steel

Fittings Finger Plates & Kicking Plates Toilet Roll Holder

75mm

sized to order

sized to order CS467 300mm 70mm

CS449

135mm CS468 CS469

Bell Push Hand Rail Bracket

CS464 52mm 52mm 76mm CS465

Flush Bolt Signs

• Lever Action. • Dimensions of 100mm x 150mm.

100mm 100mm 100mm

CS462

150mm 150mm 150mm

19mm

250mm CS446MS CS446FS CS446DS

FF9 Fittings - Stainless Steel

Fittings Wall Mounted Door Stops Floor Mounted Door Stops

Concealed Fix Oval Shielded Concealed Fix Bumper Secret Fix Secret Fix

CS445OFS CS445FC CS445FB

CS442

75mm A Model A CS444/5 50mm CS444/7 75mm 50mm 50mm 30mm

Hooks CS445 Range

Wardrobe Hook Hat & Coat Hook

62mm 85mm

CS446 19mm 28mm CS447 19mm 28mm Notes

FF10 Furniture - Brass

Styling Features and Functions

The furniture is available in two styles: Fixing Types Concealed Fixing Guarantee Guarantee period applicable when The furniture can be fixed to the Some products feature clip on cover original Chubb maintenance Rose Style door in two ways. plates which cover the fixings. instructions are followed. The handle and Bolt Through cylinder escutcheon The inside and outside furniture are available are bolted together with a pair of separately on a rose. special bolts that pass through the lock and door. Backplate Style Face Fix Lever Furniture Variations The handle and The furniture is screw fixed to the The furniture is available to suit surface of the door. mortice locks and latches, either cylinder cut out are using roses and escutcheons or on a single backplate. backplates - lever key, euro profile, oval profile, bathroom, privacy and latch types are included. Latch (LA) For use with tubular latches. Lever Lock (LO) For use with mortice locks • In addition to the contemporary round bar range, operated by a lever key. Chubb also have a range of classic Georgian and Euro (PE) Victorian styles available. Handle Fixing For use with cylinder mortice locks Round bar levers are fixed to the operating with a Euro Profile spindle with a grubscrew. cylinder Oval (PO) Fixings Spindle For use with cylinder mortice locks All furniture is supplied with an All fixings, such as screws and bolts are supplied. operating with an Oval Profile 8mm spindle. cylinder. Bathroom (PB) Springing For use with mortice locks that What are Centres? Sprung incorporate a spindle thrown deadbolt. • This is the measurement The lever returns to the rest position irrespective of any spring Privacy (PR) from the centre of the action in the lock. ‘follower’, which operates For use with tubular larches where Unsprung the handle requires locking. the handles, to the centre The lever returns to rest on the of the keyhole. spring action of the lock only. Centres • In the UK this is commonly 57mm, although other Finish: Polished Brass sizes are available. Ideal for use with: Mortice locks & latches. ▼

FF11 Furniture - Brass

Lever Handles - Return to Door Lever Handles - Georgian Style Lever Handles - Victorian Style

Page Page Page Page CBR200 Range FF14 CBR207 Range FF14 CBR205 Range FF15 CBR206 Range • CBR208 Range FF15

Page Page Page Page CBR200RR FF14 CBR207PR FF14 CBR205PR FF15 CBR206PR FF15

FF12 Security Features

Finish Features / Functions Options Furniture & Fittings Styling Variation Fixing Concealed Springing Polished Backplate Rose Latch Lock Euro Oval Bathroom Privacy Centres Face Fix Bolt Through Fixing Sprung Un Sprung OtherBrass

Lever Handles - Return to Door CBR200RR 20mm Round Bar handle 5 CBR200LA 20mm Round Bar handle 5 57mm CBR200LO 20mm Round Bar handle 5 48mm CBR200PE 20mm Round Bar handle 5 5 48mm CBR200PO 20mm Round Bar handle 5 57mm CBR200PB 20mm Round Bar handle

Lever Handles - Georgian Style

CBR207LA Georgian Handle 5 SB

CBR207LO Georgian Handle 5 57mm

CBR207PB Georgian Handle 5 57mm CBR207PR Georgian Handle 5 SB

Lever Handles - Victorian Style

CBR205LA Victorian Straight 5 SB

CBR205LO Victorian Straight 5 57mm

CBR205PB Victorian Straight 5 57mm CBR205PR Victorian Straight 5 SB 5 SB CBR206LA Victorian Scroll 5 57mm CBR206LO Victorian Scroll 5 57mm CBR206PB Victorian Scroll 5 SB CBR206PR Victorian Scroll 5 SB CBR208LA Victorian Shaped Scroll 5 57mm CBR208LO Victorian Shaped Scroll 5 57mm CBR208PB Victorian Shaped Scroll

Key: SB = Short Backplate

FF13 Furniture - Brass

Lever Handles - Return to Door 20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

• Bathroom version has inside turn and outside emergency release. • Ideal for heavy duty applications. • Ideal for heavy duty applications. • See fittings for matching eschutcheons.

129mm 63mm

CBR200RR 180mm Model Centres 51mm CBR200LA n/a 7mm CBR200LO CBR200PE CBR200LO 57mm CBR200PE 48mm 63mm CBR200PO 48mm 40mm 11mm CBR200PB 57mm CBR200PO CBR200PB CBR200LA 129mm Lever Handles - Georgian Style Georgian Handle on Backplate Georgian Privacy Handle

• Ideal for medium/heavy duty applications. • Bathroom version has inside turn and outside emergency release. • Ideal for heavy duty applications. 96mm • For use with tubular latches. Inside turn locks handle, emergency release on outside handle. •••• • 110mm •••• •••••• •••••• 96mm 55mm •••••••••••• • • 96mm

55mm

•••••• 110mm •••••••••••• ••• ••••• •••••• ••••• •••••• • ••••••••••••• • • •••••••• • 50mm

CBR207LA 55mm CBR207LO 120mm Short Backplate CBR207PB Long Backplate 9mm

Model Centres 50mm Outside Handle CBR207LA n/a CBR207PR CBR207LA CBR207LO CBR207PB CBR207LO 57mm 50mm 9mm CBR207PB 57mm 9mm

FF14 Furniture - Brass

Lever Handles - Victorian Style Straight Handle on Backplate Straight Privacy Handle

• Ideal for medium/heavy duty applications. 105mm • Ideal for medium/heavy duty applications. • Bathroom version has inside turn and outside emergency release. • For use with tubular latches. • Inside turn locks handle, emergency release on outside handle. 120mm 105mm 33mm 105mm 33mm

42mm 120mm CBR205LA 33mm 120mm CBR205LO Short Backplate CBR205PB Long Backplate 10mm 42mm Model Centres Outside Handle CBR205LA n/a CBR205LA CBR205LO CBR205PB 42mm 10mm CBR205LO 57mm CBR205PB 57mm CBR205PR 10mm

Scroll Handle on Backplate Scroll Privacy Handle

• Ideal for medium/heavy duty applications. • Ideal for medium/heavy duty applications. • Bathroom version has inside turn and outside emergency release. Victorian Shaped Scroll • For use with tubular latches. Inside turn locks handle, emergency release 98mm Victorian Scroll • • on outside handle. handle on a 98mm shaped backplate (203mm x 50mm).

120mm • Available in Latch, Lock and 46mm 120mm Bathroom variations. 46mm

CBR208 Range 42mm

CBR206LA 42mm Short Backplate Model Ctr. Outside Handle CBR206LA CBR208LA n/a CBR206LA CBR206LO CBR206PB CBR206LO • CBR206PB CBR208LA CBR208LO CBR208PB Long Backplate CBR206LO CBR208LO 57mm 150mm long 10mm CBR206PB CBR208PB 57mm CBR206PR 10mm

FF15 Fittings - Brass

Fittings Escutcheons and Turn Indicator Cylinder Pulls

• Ideal for use with the round rose handle. 7mm

7mm

52mm 78mm 78mm

52mm

CBR216TU

CBR248B CBR248R CBR215LO 52mm 43mm 43mm

7mm 7mm

78mm 78mm 52mm 52mm

CBR215PE CBR215PO CBR248PE CBR248PO 43mm 43mm

Pull Handles Pull Handles

• Bolt fix handle. • Cranked pull handle, screw fix. 60mm 60mm 50mm

A A 19mm

Model A

CBR217/1BF 150mm Model A CBR217/2BF 225mm CBR238/2 225mm CBR217/3BF 300mm CBR238/3 300mm

FF16 Fittings - Brass

Fittings Pull Handles Pull Handles

• Pull handle mounted on backplate, screw fix. • Concealed fix. 52mm

CBR220/IP B A A 19mm

Model A B C Model A CBR220/1P 165mm 150mm 155mm CBR218/1CF 150mm CBR220/2P 300mm 225mm 75mm CBR218/2CF 225mm CBR220/3P 350mm 300mm 75mm CBR218/3CF 300mm C

Pull Handles Finger Plates & Kicking Plate

• Ideal for heavy duty applications. • Back to Back fix. 60mm 75mm

sized to order

CBR267 sized to order 300mm 19mm A

CBR268 Model A CBR219/1BB 150mm CBR219/2BB 225mm CBR269 CBR219/3BB 300mm

FF17 Fittings - Brass

Fittings Indicator Bolt Signs

100mm 100mm 100mm

150mm 150mm 150mm 41mm

CBR263 57mm 63mm CBR266MS CBR266FS CBR266DS

Letter Plate & Door Tidy Toilet Roll Holder Bell Push

CBR252 CBR255 70mm

50mm 75mm CBR249 135mm CBR264 52mm 227mm 300mm

Hand Rail Bracket Towel Rail

600mm

CBR265 52mm CBR250 55mm 80mm

Hooks Wardrobe Hook Hat & Coat Hook Cabin Hooks Model A

CBR259/1 76mm CBR246 62mm CBR259/2 102mm CBR247 50mm CBR259/3 152mm CBR259/4 204mm CBR259/5 254mm A 28mm CBR259/6 305mm

FF18 Fittings - Brass

Fittings Wall Mounted Door Stops Floor Mounted Door Stops

Concealed Fix Oval Sheilded Round Shielded Bumper Secret Fix Secret Fix

CBR245OFS CBR245FS CBR245FB

CBR242

75mm A Model A CBR244/5 50mm

CBR244/7 75mm 50mm 41mm 30mm

Bolts Casement Stay

Barrell Bolts Lever Action Flush Bolts

A A

Model A Model A Model A A CBR258/2 100mm CBR262/1 150mm CBR256/2 254mm CBR258/3 150mm CBR262/2 200mm CBR256/3 300mm

Knob Furniture & Cabinet Handle Casement Fasteners

• Supplied with 8mm spindle. 37mm Wedge Type Hook Type

CBR257W

A 9.5mm CBR260

Model A 110mm CBR240/10 100mm CBR240/15 152mm CBR257H 90mm CBR240 105mm

FF19 Furniture - Nylon

Styling Features and Functions

The furniture is available in two styles: Fixing Types Concealed Fixing Guarantee Guarantee period applicable when The furniture can be fixed to the Some products feature clip on cover original Chubb maintenance door in two ways. plates which cover the fixings. instructions are followed. Bolt Through Rose Style Fire Resistant The handle and The inside and outside furniture Certain products have been included cylinder escutcheon are bolted together with a pair of in a successful fire test to BS 476 PT22 special bolts that pass through the are available lock and door. Products that meet PSAMOBH3PS separately on a rose. Face Fix have been tested to the performance specifications issued by the Property The furniture is screw fixed to the Services Agency. surface of the door.

Steel Cored Backplate Style Lever Furniture Variations The handle and Steel core of the handle helps to increase the strength. The furniture is available to suit cylinder cut out are mortice locks and latches, either on a single backplate. using roses and escutcheons or backplates - lever key, euro profile, oval profile, bathroom and latch types are included. Latch (LA) Handle Fixing For use with tubular latches. Round bar levers are fixed to the Lever Lock (LO) spindle with a grub screw. For use with mortice locks operated by a lever key. Spindle Fixings Euro (PE) All furniture is supplied with an All fixings, such as screws and bolts are supplied. For use with cylinder mortice locks 8mm spindle. operating with a Euro Profile cylinder Springing Oval (PO) What are Centres? Sprung For use with cylinder mortice locks • This is the measurement The lever returns to the rest operating with an Oval Profile position irrespective of any spring cylinder. from the centre of the action in the lock. Bathroom (PB) ‘follower’, which operates Unsprung the handles, to the centre For use with mortice locks that The lever returns to rest on the of the keyhole. incorporate a spindle Centres spring action of the lock only. thrown deadbolt. • In the UK this is commonly 57mm, although other Finish: Black RAL 9005 White RAL 9016 Blue RAL 5002 Dark Blue RAL 5003 Red RAL 3003 Dark Red RAL 3005 sizes are available. Light Grey RAL 7036 Dark Grey RAL 7043 Green RAL 6016 Yellow RAL 1004 Brown RAL 8017

FF20FF3 Furniture - Nylon

Lever Handles - Return to Door

Page Page CN100RR FF22 CN100 Range FF22

Security Features

Features / Functions Finish Options Furniture & Fittings Styling Variation Fixing Concealed Springing 9005 9016 5002 5003 3003 3005 7036 7043 6016 1004 8017 Backplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung

Lever Handles - Return to Door ●●●● CN100RR Steel Core Round Bar ● 5 ● ●● ●●●●● ●●● ●● ● ● ● CN100LA Steel Core Round Bar 5 ● ●● ●●●●● ●●● ●● 57mm ●●● CN100LO Steel Core Round Bar 5 ● ●● ●●●●● ●●● ●●48mm ●●●● ●● ●●●●● ●●● CN100PE Steel Core Round Bar 5 5 ●●48mm ●●●● ●● ●●●●● ●●● CN100PO Steel Core Round Bar 5 ●●57mm ●●●● ●● ●●●●● ●●● CN100PB Steel Core Round Bar

FF21 Furniture & Fittings - Nylon

Lever Handles - Return to Door 21mm Round Bar Handle on Backplate 21mm Round Bar Round Rose Handle

46mm 73mm

CN100RR 52mm 225mm 21mm Model Centres 21mm CN100LA n/a CN100LO 57mm CN100LO CN100PE CN100PO CN100PB CN100PE 48mm 64mm CN100PO 48mm

CN100LA 135mm CN100PB 57mm 135mm

Fittings Escutcheons and Turn & Indicator Cylinder Pulls

52mm 78mm 78mm 52mm

CN116TU 9mm

CN148B 43mm CN148R 43mm CN115LO 9mm

78mm 78mm 52mm 52mm

CN115PE 9mm CN115PO 9mm CN148PE 43mm CN148PO 43mm

FF22 Fittings - Nylon

Fittings Pull Handles Pull Handles

• Bolt Fix. • Back to Back Fix. B

85mm

34mm

C A 34mm A

Model A B C CN131/1BF 165mm 64mm 23mm Model A CN131/2BF 220mm 85mm 34mm CN133/2BB 220mm CN131/3BF 300mm 85mm 34mm CN133/3BB 300mm

Pull Handles Pull Handles

• Concealed Fix. • CN134 Range are Bolt Fix. • CN135 Range are Concealed Fix.

70mm

B

A C

A 34mm Model A Model A B C CN134/2CBF 200mm CN132/1CF 165mm 52mm 23mm CN134/3CBF 300mm CN132/2CF 220mm 70mm 34mm CN135/2CBF 200mm CN132/3CF 300mm 70mm 34mm CN135/3CBF 300mm 120mm

FF23 Fittings - Nylon

Fittings Pull Handles Pull Handles

• CN137/3SBF is Bolt Fix. • CN137/3SCF is Concealed Fix. • CN136/3TBF is Bolt Fix. • CN136/3TCF is Concealed Fix.

235mm 70mm A A

300mm 300mm 34mm

70mm Model A Model A CN137/3SBF 88mm CN136/3TBF 85mm 246mm CN137/3SCF 98mm CN136/3TCF 97mm

Finger Plates & Kicking Plates Letter Plate & Door Tidy

75mm 75mm 90mm

380mm CN152LP sized to order

300mm 300mm sized to order

90mm

CN169 CN152DT 380mm CN167 CN168

FF24 Fittings - Nylon

Fittings Toilet Roll Holder Towel Ring & Towel Rail

50mm 50mm

50mm CN150TR

160mm 126mm 20mm

220mm CN150R CN149TH 450mm 160mm

Bell Push Cupboard Knob Cabinet Handles

A

40mm C B Model A B C CN141/6CH 32mm 64mm 10mm CN164BP 52mm 40mm 17mm CN161CK CN141/9CH 38mm 96mm 12mm

Barrel Bolts Flush Bolt

CN162FB

25mm Model A 19mm

CN158/1 152mm 203mm A CN158/2 200mm

FF25 Fittings - Nylon

Fittings Signs & Symbols

100mm 100mm 100mm

150mm 150mm 150mm

CN165DS CN165FS CN165MS CN166DS CN166FS CN166MS

• Rigid Plastic - Screw fixing. Available as Rigid Plastic - Screw fixing, or Vinyl Self Adhesive. • Rigid Plastic - Screw fixing. • All exit signs feature running person icon. • CNSBA Fire door keep closed CNSBB Fire door keep locked CNSBC Automatic fire door Sign shown is: CN165DS CNSFE FIRE EXIT ì CNSBD Close this door at night CNSBE This door is alarmed CNSGFA FIRE EXIT è CNSGEF EXIT è CNSBF Alarm will sound if bar is pushed CNSGFB FIRE EXIT ç CNSGEG EXIT ç CNSBG This door must be kept closed CNSGFC FIRE EXIT ê CNSGEH EXIT ê Sign shown is: CNSBH Gangway keep clear CNSGFD FIRE EXIT é CNSGEJ EXIT é CNSBJ Fire exit keep clear CNSBJ Fire escape keep clear CNSGFE FIRE EXIT ì CNSGEK EXIT ì CNSBK Fire exit keep clear

Door Stops Hooks

Hat & Coat Hook - Concealed Fix Hat & Coat Hook -Face Fix Wardrobe Hook 80mm 63mm Secret Fix Wall Mounted Concealed Fix Floor Mounted

CN142 40mm 145mm 164mm 62mm

52mm CN145FC 75mm CN146W 35mm CN147CF 35mm CN147FF 35mm

FF26 Furniture - Aluminium

Styling Features and Functions

The furniture is available in two styles: Fixing Types Guarantee Guarantee period applicable when The furniture can be fixed to the original Chubb maintenance door in two ways. instructions are followed. Rose Style Bolt Through The handle and The inside and outside furniture cylinder escutcheon are bolted together with a pair of special bolts that pass through the are available lock and door. separately on a rose. Face Fix The furniture is screw fixed to the surface of the door.

Satin Anodised Backplate Style Lever Furniture Variations The handle and The furniture is available to suit cylinder cut out are Textured Silver mortice locks and latches, either on a single backplate. using roses and escutcheons or backplates - lever key, euro profile, oval profile, bathroom and latch types are included. Latch (LA) Handle Fixing For use with tubular latches. Round bar levers are fixed to the Lever Lock (LO) spindle with a grub screw. For use with mortice locks operated by a lever key. Fixings Spindle Euro (PE) All furniture is supplied with an All fixings, such as screws and bolts are supplied. For use with cylinder mortice locks 8mm spindle. operating with a Euro Profile cylinder Springing Oval (PO) What are Centres? Sprung For use with cylinder mortice locks • This is the measurement The lever returns to the rest operating with an Oval Profile position irrespective of any spring cylinder. from the centre of the action in the lock. Bathroom (PB) ‘follower’, which operates Unsprung Concealed Fixing the handles, to the centre For use with mortice locks that The lever returns to rest on the Some products feature clip on cover of the keyhole. incorporate a spindle Centres spring action of the lock only. plates which cover the fixings. thrown deadbolt. • In the UK this is commonly 57mm, although other Finish: Satin Anodised Textured Silver sizes are available. Ideal for use with: Mortice locks & latches ▼

FF27FF3 Furniture - Aluminium

Lever Handles - Return to Door Lever Handles - Straight

Page 3K70 FF30

Page Page Page CA300 Range • CA304 Range FF30 CA302 Range FF30 3R35 FF30

Page Page Page CA300RR • CA304RR FF30 CA302RR FF30 3CF FF30

FF28 Security Features

Features / Functions Finish Options Furniture & Fittings Style Variation Fixing Concealed Springing Satin Textured Backplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung OtherAnodised Silver

Lever Handles - Return to Door ● ●● ● ● CA300RR 20mm Round Bar Handle 5 ●● ●● ●● ● ● CA300LA 20mm Round Bar Handle 5 ●● ●● 57mm ●● ● ● CA300LO 20mm Round Bar Handle 5 ●● ●●48mm ●● ● ● ●● CA300PE 20mm Round Bar Handle 5 ●●●● ● ● 5 48mm ●● CA300PO 20mm Round Bar Handle ● ● ●● ● ● 5 57mm ●● CA300PB 20mm Round Bar Handle 5 ●● ●● ● ● RCB ● CA301RLA 20mm Round Bar Handle 5 ●● 57mm ●● ● ● RCB ● CA301RLO 20mm Round Bar Handle 5 ● ● 57mm ●● ● ● RCB ● CA301RPB 20mm Round Bar Handle 5 ● ●● ● ● ● CA304RR 22mm Round Bar Handle 5 ●● ●● ● ● ● CA304LA 22mm Round Bar Handle 5 ●● 57mm ●● ● ● ● CA304LO 22mm Round Bar Handle 5 ●●48mm ●● ● ● ● CA304PE 22mm Round Bar Handle 5 ●●48mm ●● ● ● ● CA304PO 22mm Round Bar Handle 5 ● ● 57mm ●● ● ● ● CA304PB 22mm Round Bar Handle

Lever Handles - Straight

3K70 Straight Handle 5 ●● 57mm ●● ● ● ● ● 3R35L Straight Handle 5 ●● 57mm ●● ● ● LH ● 3R35R Straight Handle 5 ●● 57mm ●● ● ● RH ●● ●● ● ● ● 3CF Straight Handle 5 53mm 5 ● ●● ● ● ● CA302RR 20mm Round Bar Handle 5 ●● ●● ● ● ● CA302LA 20mm Round Bar Handle ● 5 ●● 57mm ●● ● ● CA302LO 20mm Round Bar Handle ● 5 ●●48mm ●● ● ● CA302PE 20mm Round Bar Handle ● 5 ●●48mm ●● ● ● CA302PO 20mm Round Bar Handle ● 5 ● ● 57mm ●● ● ● CA302PB 20mm Round Bar Handle

Key: RCB = Radius Cornered Backplate LH = Left Hand RH = Right Hand

FF29 Furniture - Aluminium

Lever Handles - Return to Door Round Bar Handle on Backplate Round Bar Round Rose Handle

• CA300 Range available in Textured Silver finish. 40mm 65mm Model A Rounded Backplate • CA300 Range 20mm (RCB). CA301R & CA304 Ranges22mm 52mm 154mm A CA301R Range Model Centres A LA n/a LO 57mm Model A PE 48mm CA300RR 20mm 63mm PO 48mm CA304RR 22mm PB 57mm 126mm CA300LA CA300LO CA300PE CA300PO CA300PB 132mm CA304LA CA304LO CA304PE CA304PO CA304PB Lever Handles - Straight 20mm Round Bar Handle on Backplate 20mm Round Bar Round Rose Handle

40mm 65mm

154mm 52mm 20mm Model Centres 20mm CA302LA n/a CA302RR CA302LO 57mm CA302PE 48mm CA302PO 48mm 62mm CA302PB 57mm CA302LA CA302LO CA302PE CA302PO CA302PB 120mm 120mm

3K70 3R35 3CF

• 57mm Centres. 40mm • 57mm Centres. 40mm • 53mm Centres. 40mm • For use with the 3R35 mortice lock.

200mm 102mm 200mm 102mm 200mm 102mm

10mm 10mm 10mm

FF30 Furniture - Aluminium

Lever Handles - Return to Door Lever Handles - Return to Door on Large Backplates

• Available in two Backplate sizes. Model A • 160 x 64 Backplate. CA311 Range 20mm • Available in Lock, Euro, CA312 Range 22mm Oval & Bathroom styles. CA313 Range 20mm CA314 Range 22mm

CA311 Range • CA312 Range

A Model Centres 160mm LA n/a LO 57mm PE 48mm CA311LO CA311PE CA311PO CA311PB CA312LO CA312PE CA312PO CA312PB see table below PO 48mm CA311LA • CA312LA CA313LO CA313PE CA313PO CA313PB PB 57mm CA313LA • CA314LA CA314LO CA314PE CA314PO CA314PB

Security Features

Features / Functions Finish Options Furniture & Fittings Style Variation Fixing Concealed Springing Satin Anodised Backplate Rose Latch Lock Euro Oval Bathroom Centres Face Fix Bolt Through Fixing Sprung Un Sprung Other (mm) Lever Handles - On Large Backplates

CA311LA* (20mm) ● CA312LA* (22mm) 5 160 x 64 ● ●●● ● CA311LO*(20mm) ● CA312LO* (22mm) 5 160 x 64 ● 57mm ●● ● ●●● CA311PE* (20mm) ● CA312PE* (22mm) 5 160 x 64 48mm ● ●●● CA311PO*(20mm) ● CA312PO* (22mm) 5 160 x 64 48mm ● ●●● CA311PB* (20mm) ● CA312PB* (22mm) 5 160 x 64 57mm LH/RH 5 160 x 160 ● ●●● CA313LA* (20mm) ● CA314LA* (22mm) 5 160 x 160 ● 57mm ●●● CA313LO*(20mm) ● CA314LO* (22mm) 5 160 x 160 ● 48mm ●●● CA313PE* (20mm) ● CA314PE* (22mm) 5 160 x 160 ● 48mm ●●● CA313PO*(20mm) ● CA314PO* (22mm) 5 160 x 160 ● 57mm ●●LH/RH ● CA313PB* (20mm) ● CA314PB* (22mm) Key: * Round Bar Handle LH = Left Hand RH = Right Hand

FF31 Fittings - Aluminium

Fittings Escutcheons & Indicator Turn Cylinder Pulls

• Also available in Textured Silver finish.

52mm 78mm 78mm 52mm

7mm CA316TU 43mm CA315LO 7mm CA348B CA348R 43mm

78mm 78mm 52mm 52mm

CA315PE CA315PO 7mm 7mm CA348PE 43mm CA348PO 43mm

Pull Handles Pull Handles

• Bolt Fix. • CA317 is also available in Textured Silver finish. • Concealed Fix.

Model A Model A CA317/1BF 150mm CA318/1CF 150mm CA317/2BF 225mm CA318/2CF 225mm CA317/3BF 300mm CA318/3CF 300mm

Model A Model A CA323/1BF 150mm CA324/1CF 150mm B A B A CA323/2BF 225mm CA324/2CF 225mm CA323/3BF 300mm CA324/3CF 300mm

Model B Model B CA317 Range 19mm CA318 Range 19mm CA323 Range 22mm CA324 Range 22mm

F32 Fittings - Aluminium

Fittings Pull Handles Pull Handles

• Back to Back Fix. • Cranked Pull Handle, Screw Fix. Model A 60mm CA319/1BB 150mm 60mm 50mm CA319/2BB 225mm CA319/3BB 300mm

Model A CA325/1BB 150mm B A 225mm CA325/2BB A CA325/3BB 300mm

Model B Model A CA319 Range 19mm CA338 /2 225mm CA325 Range 22mm CA338/3 300mm

Pull Handles Pull Handles

• Pull Handle mounted on Backplate, Screw Fix. • CA322 & CA328 are Back to Back Fix versions of CA321 & CA327.

C Model A CA322/2CBB 225mm CA322/3CBB 300mm

Model B Model A CA320 Range 19mm A B CA321/2CBF 225mm B CA326 Range 22mm CA320/1P A CA321/3CBF 300mm D Model A B C

CA326/1P • CA320/1P 165mm 150mm 155mm Model B CA326/2P • CA320/2P 300mm 225mm 75mm CA321 & CA322 Range 19mm 107mm CA326/3P • CA320/3P 350mm 300mm 75mm CA327 & CA328 Range 22mm

FF33 Fittings - Aluminium

Fittings Finger Plates & Kicking Plates Toilet Roll Holder

75mm CA369

CA467 70mm 300mm sized to order CA349 135mm CA468 sized to order

Letter Plate & Door Tidy Towel Rail

52mm

CA355 CA355 CA350 600mm

50mm 79mm

227mm 300mm

Bell Push Hand Rail Bracket

CA364 52mm 10mm 52mm 76mm CA365

FF34 Fittings - Aluminium

Fittings Flush Bolts & Barrel Bolts Signs

100mm 100mm 100mm

A A 150mm 150mm 150mm

Model A Model A CA362/1 150mm CA358/1 75mm CA366MS CA366DS CA362/2 200mm CA358/2 100mm CA366FS CA358/3 150mm

Wall Mounted Door Stops Floor Mounted Door Stops

Wall Mounted Secret Fix Concealed Fix Oval Shielded Round Shielded

CA342

A

Model A 50mm 50mm CA345OFS CA345FS CA344/5 50mm 75mm CA344/7 75mm

Hooks CS445 Range Wardrobe Hook Hat & Coat Hook • CA347 Available in buffered finish (CA347B) 60mm 75mm

65mm 92mm

CA346 CA347

FF35 • Overhead Door Closers

• Electro-Mag Door Closers

• Floorsprings

• Automatic Door Systems Door Closers

Door Closers Overhead Door Closers P

Door Closers Index Introduction How to Specify Security Features

1 • Introduction D2 Chubb offer a comprehensive range of Door Closers Chubb have developed a series of icons to enable for architectural specification. the process of product specification to be simplified. Protected Section Overhead Closers Products are available as an option on a The range includes overhead closers, electro- From today you can specifically detail your patented key section. magnetic closers, floor springs and automatics. • BS EN 1154 Classification D3 requirements for a product, therefore ensuring that 2 it includes particular security features. • Features and Functions D3 Drill Resistant Hardened protection against drill attack. • Cover Designs D4 Chubb is accredited with and meets the Example 1: If you require an overhead closer that requirements of BS EN ISO 9001: 1994. meets BS EN 1154 look for the relevant logo. 3 • Cover Finishes D4 Example 2: If this closer then needs to conform to Saw Resistant • Range Table D5 Hardened protection against saw attack. There are a choice of 2 cover designs and a variety appropriate fire test requirements, look for icon 9. • Power Adjustable Closers D6 - 9 of power engines sourced from the worlds’ leading 4 Chubb, Simplifying the Specification Process. • Transom Concealed Closer D10 closer manufacturers. A comprehensive range of Force Resistant finishes are available to complement the furniture Built in strength against force attack. Electro-Mag Closers ranges. 5 • BS EN 1155 Classification D11 Pick Resistant • Features and Functions D11 Built in protection to resist picking. Fitting Configurations • Photo Gallery D12 6 • Range Table D12 Torque Resistant Built in strength against torque attack. • Electro Mags D13 - 14 Figure 1 Figure 66 7 Floor Springs Tamper Resistant • BS EN 1154 Classification D15 Built in protection against Tampering.

• Features and Functions D15 8 Corrosion Resistant • Photo Gallery D16 Products conform to appropriate anti-corrosion requirements. • Range Table D16 Figure 61 Slide Track 9 • Floor Springs D17-19 Fire Resistant Products conform to appropriate fire test Automatic Door Systems requirements.

• Automatic Door Systems D20 - 21 10 Notes Page Escape • D22 - 23 Products for use on an escape door.

Standards & Approvals 11 Note: We have made every effort to ensure that at Key Control the time of going to print all information shown in The products can be included in a key this catalogue is correct. However, in our efforts to control system. Classifies electrically continually improve our products and offer only the Classifies door powered hold-open highest levels of security and quality we reserve the closers using a 6 12 right to make alterations to the product devices using a 6 digit coding system. Guarantee specifications shown in this catalogue. All digit coding system. Products are guaranteed for a period of dimensions provided within this catalogue are time. approximate and for guidance only. BS EN 1154 BS EN 1155

D2 Overhead Door Closers

BS EN 1154 Classification Features and Functions

This standard classifies door closers using a 6 digit coding system. Each digit relates Power Adjust Covers Fire Resistant to a particular feature of the product measured against the standards performance Suitable for use on fire / smoke Only available on higher specification Two cover designs are available to requirements. doors. models, this function provides power suit all but the 1000 series closer. adjustment of the closer when fitted Both are available in a wide choice of Guarantee Digit 1 - Category of use • Grade 3: For closing doors from at least 105˚. which allows the power of the closer to architectural finishes. Guarantee period applicable • Grade 4: For closing doors from 180˚ open. be matched exactly to the requirements when maintenance instructions of the door. followed. Covers Digit 2 - Durability • Grade 8: 500,000 test cycles completed. Products successfully type- tested for conformity to Adjustable Latch BS EN 1154. Arm Digit 3 - Test door mass/size Seven grades are identified as shown in the table Provides adjustable speed control over Either screw or slide the last few degrees of closing below where a closer provides a range of power adjustable arm as allowing either slowing down the sizes both the minimum and maximum sizes shall standard. be shown. door to provide a cushioning effect or speeding up to overcome a latch.

Digit 4 - Fire behaviour • Grade 0: Not suitable for use on fire/smoke doors. Bracket • Grade 1: Suitable for use on fire/smoke doors. The provision of a bracket This is assessed outside of BS EN 1154. allows the closer to be mounted in the Parallel Digit 5 - Safety • Grade 1: All door closers are required to satisfy the arm position. essential requirement of safety in use.

Digit 6 - Corrosion resistance Five grades are identified according to BS EN1670. • Grade 0: No defined corrosion resistance. • Grade 1: Mild resistance. • Grade 2: Moderate resistance. • Grade 3: High resistance • Grade 4: Very high resistance. Test door mass/size

Test door mass/size Door Closer Test door Recommended door Backcheck Power Adjust Shoe Door Closer Action power size mass Kg leaf width mm. Provides an adjustable cushioning On certain models the power of the 1 20 750 effect when the door is thrown open. closer can be increased by up to 15% by the positioning of the armset shoe. 2 40 850 Latch

3 60 950 Delayed Action Delay 4 80 1100 Sweep Provides an adjustable time delay in Adjustable Sweep Normal 5 100 1250 the closing cycle of the door allowing Allows adjustment over the closing Opening Backcheck 6 120 1400 the disabled, elderly or trolleys to speed of a door during the sweep 7 160 1600 pass through the door unhindered. phase.

Example The following marking denotes a closer capable of opening to at least 105˚, with a power size of 3, Finishes: Silver Gold Satin Stainless SteelPolished Stainless Steel Brown Bronze which is suitable for use on fire/smoke doors. 383110 Textured Silver Polished Brass Satin ChromePolished Chrome RAL

D3 Cover Designs

New Wave Cover (NW) Finishes

• New style cover for use on Chubb range of closers. • Metal construction, fixing via backplate.

• Silver • Red RAL 3003 68mm

• Gold • Dark Red RAL 3005

66mm • Satin Stainless Steel • Green RAL 6016

285mm • Polished Stainless Steel • Yellow RAL 1004

Standard Cover (STD) • Brown Bronze • Light Grey RAL 7036 ////////////////// • Metal construction cover for use on Chubb range of closers. • Textured Silver • Dark Grey RAL 7043 • Fixing via backplate.

52mm • Polished Brass • Black RAL 9005

• Satin Chrome • White RAL 9016

66mm • Polished Chrome • Blue RAL 5002

285mm • Brown RAL 8017 • Dark Blue RAL 5003

Note: Examples of covers are shown throughout the catalogue. D4 Security Features

Standards Cover Designs Features & Functions Finishes Overhead Door Closers sion /////////// Fire New Standard Power Adj. Adj. Backcheck Delayed Hold Arm S G SSS PSS BB ///////////TS PB SC PC RAL sistant Wave (STD) Size Latch Sweep Action Open Resitant Guarantee (NW) BS EN 1154 Fixed Power

C1000 ● 10 2/3 ●● 1, 61, 66 ●

Fixed Power

C2003 ● 10 ●● 3 ●● 1, 61, 66 ●●●●●●●●●●

Power Adjustable

4 C2501BCM 48 110 ● ●● 1/2/3/4 ●● ● O 1, 61, 66 ●●●●●●●●●● 1 10

4 C2501DLM 48 110 ● ●● 1/2/3/4 ●● ● ●O 1, 61, 66 ●●●●●●●●●● 1 10

4 C2511BCM 48 110 ● ●● 1/2/3/4 ●● ● ●ST ●●●●●●●●●● 1 10

Power Adjustable

4 48 11411 ● ●● 2/3/4 ●● O 1, 61, 66 ●●●●●●●●●● C2600 2 10

4 C2700 48 11411 ● 10 ●● 3/4 ●● OO1, 61, 66 ●●●●●●●●●● 3

Power Adjustable

5 48 11311 ● ●● ●● ●●●●●●●●●● C2800 2 10 2/3/4/5 OOO1, 61, 66

Power Adjustable

C2900 ● 10 ●● 3/4/5/6 ●● ● 1, 61, 66 ●●●●●●●●●●

C3000 ● 10 ●● 3/4/5/6 ●● ● O ST ●●●●●●●●●●

Transom Concealed 382014 383014 ●● ● ● C3100 384014 10 N/A N/A 2/3/4 O –

Key: ST = Slide Track O = Optional Finishes: S = Silver G = Gold SSS = Satin Stainless Steel PSS = Polished Stainless Steel BE = Brown Bronze TS = Textured Silver PB = Polished Brass SC = Satin Chrome PC = Polished Chrome RAL = Various RAL Colours. * When ordering Door Closers please suffix Pattern Number with Cover Design ie New Wave (NW) or Standard (STD) and Finish. D5 Overhead Door Closers

Fixed Power C1000 C2003 C1000 Standards

• Surface mounted overhead door closer for single action doors. 210mm • Fixed power: BS EN 1154 spring size 2/3. BS EN 1154 • 180˚ angle of opening. • Screw adjustable armset. • Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount. Security Features • Suitable for both left and right handed doors opening either in or out. • Independent adjustable sweep and latch valves. Fire • Tested for durability to 100,000 cycles. Resistant

Guarantee 10 10

Covers

38mm New Wave

Standard

Features & Functions

40mm Power 2/3 3

Latch Fixed Power Sweep Backcheck C2003 Delay Surface mounted overhead door closer for single action doors. • Hold Open • Fixed power: BS EN 1154 size 3. 219mm 49mm • 180˚ angle of opening. Arm 1, 61, 66 1, 61, 66 • Universal fitting - 1 regular, 61 transom, and 66 parallel Finish Options arm mount. • Suitable for both left and right handed doors opening either 44mm Silver in or out. Gold • Independent adjustable sweep and latch valves. Satin Stainless Steel

Polished Stainless Steel

Brown Bronze

Textured Silver

Polished Brass

Satin Chrome

Polished Chrome

RAL

D6 Overhead Door Closers

C2501BCM Power Adjustable C2501DLM C2511BCM C2600 C2501BCM • C2501DLM • C2511BCM Standards

• Surface mounted overhead door closer for single action doors. • Successfully type-tested for conformity to all the requirements of BS EN 1154. 4 4 4 BS EN 1154 48 110 48 110 48 114 • Adjustable power: BS EN 1154 size 1/2/3/4. 219mm 49mm 1 1 2 • 180˚ angle of opening. • Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount. • Suitable for both left and right handed doors opening either in or out. Security Features • Backcheck as standard. 44mm • Independent adjustable sweep and latch valves. Fire ● ● ● Resistant • Adjustable hold open arm optional. • Optional slide adjustable armset. BS EN 1154 • Delayed action variant available (C2501DLM). Guarantee 10 10 10

Covers

New Wave ●●●

Standard ●●●

Features & Functions

Power 1/2/3/4 1/2/3/4 2/3/4

Latch ●●● Power Adjustable Sweep ●●● Backcheck ●● C2600 Using Dorma Power Unit Delay ● (DLM) • Surface mounted overhead door closer for single action doors. 255 - 370mm Hold Open O ● O • Successfully type-tested for conformity to all the requirements of BS EN 1154. Arm 1, 61, 66 ST 1, 61, 66 Adjustable power: BS EN 1154 size 2/3/4. • Finish Options • 180˚ angle of opening. Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount. Silver ●●● • 69mm • Suitable for both left and right handed doors opening either in or out. Gold ●●● Independent adjustable sweep and latch valves. • ●●● Adjustable hold open arm optional. Satin Stainless Steel • BS EN 1154 223mm Polished Stainless Steel ●●● • Closer uses Dorma Power Unit TS72. 47.5mm Brown Bronze ●●●

Textured Silver ●●●

Polished Brass ●●●

Satin Chrome ●●●

Polished Chrome ●●●

RAL ●●●

D7 Overhead Door Closers

Power Adjustable C2700 C2800 C2700 Using Dorma Power Unit Standards

• Surface mounted overhead door closer for single action doors. 4 5 Successfully type-tested for conformity to all the requirements of BS EN 1154. 48 11411 48 11311 • BS EN 1154 3 2 • Adjustable power: BS EN 1154 size 3/4. 255 - 370mm • 180˚ angle of opening. • Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount. Security Features • Suitable for both left and right handed doors opening either in or out. Independent adjustable sweep and latch valves. • Fire ● ● • Screw adjustable armset. 60mm Resistant • Adjustable hold open arm optional. BS EN 1154 • Delayed action available (C2700DL). Guarantee 10 10 • Closer uses Dorma Power Unit TS73N. 208mm 42.5mm Covers

New Wave ●●

Standard ●●

Features & Functions

Power 3/4 2/3/4/5

Latch ●● Power Adjustable Sweep ●● Backcheck O (C2800BC) C2800 Using Jebron Power Unit Delay O (C2700DL) O (C2800DL)

• Surface mounted overhead door closer for single action doors. Hold Open OO (C2800HO) • Successfully type-tested for conformity to all the requirements of BS EN 1154. Arm 1, 61, 66 1, 61, 66 • Adjustable power: BS EN 1154 size 2/3/4/5. 55mm 60mm • 180˚ angle of opening. Finish Options Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount. • ●● • Suitable for both left and right handed doors opening either in or out. 269mm Silver • Independent adjustable sweep and latch valves. Gold ●● 92mm • Backcheck as option available. Satin Stainless Steel ●● Adjustable hold open arm optional. BS EN 1154 • ●● • Optional slide arm. Polished Stainless Steel • Closer uses Jebron Power Unit 9900. Brown Bronze ●● 260mm Textured Silver ●●

Polished Brass ●●

Satin Chrome ●●

Polished Chrome ●●

RAL ●●

D8 Overhead Door Closers

Power Adjustable C2900 C3000 C2900 Standards

• Surface mounted overhead door closer for single action doors.

• To DIN 18263, Part 2. 32mm BS EN 1154 • Adjustable power: BS EN 1154 size 3/4/5/6. 102mm • 180˚ angle of opening. 66mm • Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount. Security Features

• Suitable for both left and right handed doors opening either in or out. Fire ● ● Resistant • Independent adjustable sweep and latch valves. 52mm 285mm Guarantee 10 10

Covers

New Wave ●●

Standard ●●

Features & Functions

Power 3/4/5/6 3/4/5/6

Latch ●● Power Adjustable Sweep ●● ●● C3000 Backcheck Delay O Surface mounted overhead door closer for single action doors. • Hold Open • To DIN 18263, Part 2. 39mm Arm 1, 61, 66 ST • Adjustable power: BS EN 1154 size 3/4/5/6. 510mm • 180˚ angle of opening. 32mm Finish Options • Slide track arm as standard. Silver ●● 102mm • Suitable for both left and right handed doors opening either in or out. Gold ●● 66mm • Independent adjustable sweep, latch and backcheck valves. Satin Stainless Steel ●● • Variant with delayed action available. Polished Stainless Steel ●● 285mm • Electro-mag variant available. 52mm Brown Bronze ●● • Electro-mag and smoke detector variant available. Textured Silver ●●

Polished Brass ●●

Satin Chrome ●●

Polished Chrome ●●

RAL ●●

D9 Overhead Door Closers

Transom Concealed C3100 C3100 Using Dorma Power Unit Standards

• Transom concealed door closer. Accessories for double action and centre pivoted single action 382014 BS EN 1154 doors (70mm pivot point) • Suitable for single and double action doors. BS EN 1154 383014 • Fully controlled closing with adjustable speed. Side Load Installation (SL) End Load Installation (EL) 384014 • Adjustable final closing. Progressive mechanical backstop. • Security Features • Door opening angle max. 130° on both sides. • Hold-open points - depending on model (optional) 105° or 90°. Fire Resistant • Closer uses Dorma RTS85 Power Unit. 56.5mm 70mm Guarantee 10

Covers 84mm 94mm 73mm New Wave N/A

Standard N/A

38.5mm 250mm Features & Functions

328.5mm 20.5mm Power 2 - 4 1 Closer arm with arm channel C3110AC-SL C3110AC-EL Latch ● 2 Closer arm with angle bracket C3120AB-SL C3120AB-EL 3 Floor pivot set, total height 27mm C3127FP-SL C3127FP-EL ● C3100 Sweep Floor pivot set, total height 57mm C3157FP-SL C3157FP-EL Closing Force Size 2 3 4 4 Threshhold pivot set - channel depth 25mm C3125PS-SL C3125PS-EL Backcheck ● Spring Strength (Nm) 20 30 40 Threshhold pivot set - channel depth 40mm C3140PS-SL Delay

Hold Open O

Notes Arm

Finish Options

Silver ●

Gold

Satin Stainless Steel

Polished Stainless Steel

Brown Bronze

Textured Silver

Polished Brass

Satin Chrome

Polished Chrome

RAL

D10 Electro-Mag Closers

BS EN 1155 Classification Features and Functions

This standard classifies electrically powered hold-open devices using a 6 digit coding Where do i use an Electromagnetic Closer ? Fire Resistant system. Each digit relates to a particular feature of the product measured against the Suitable for use on fire / smoke To hold open fire doors where linked to a suitable fire alarm system. Where standards performance requirements. doors. the power source is cut off when the alarm is triggered the fIre door fitted with a standard door closer is released as the de-energised magnet and the Guarantee Digit 1 - Category of use • Grade 3: For doors for use by the public. door shuts automatically. Guarantee period applicable when maintenance instructions followed. Digit 2 - Durability • Grade 5: 50,000 test cycles completed for electrically powered hold-open devices. • Grade 8: 500,000 test cycles completed for electrically powered hold-open and free swing door closers and devices that contain operating arms.

Digit 3 - Test door mass/size Five grades and related hold-open power sizes are identified as shown in the table below. Where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown.

Digit 4 - Fire resistance • Grade 1: Suitable for use on fire/smoke doors. This is assessed outside of BS EN 1155.

Digit 5 - Safety • Grade 1: All door closers are required to satisfy the essential requirement of safety in use.

Digit 6 - Corrosion resistance Five grades are identified according to BS EN1670. • Grade 0: No defined corrosion resistance. • Grade 1: Mild resistance. • Grade 2: Moderate resistance. • Grade 3: High resistance • Grade 4: Very high resistance.

Door Closer Actions Test door mass/size Hold-open Test door Recommended door power size mass Kg leaf width mm. 3 60 950 Latch Delay 4 80 1100 Sweep 5 100 1250 Normal Opening 6 120 1400 Backcheck Covers 7 160 1600 Two cover designs are available in a wide choice of For a description of door closer actions architectural finishes. see page D3. Example The following marking denotes a separate hold-open device power size 4 with high Finishes: Silver Gold Satin Stainless SteelPolished Stainless Steel Brown Bronze resistance to corrosion, 354113 which is suitable for use on fire/smoke doors. Textured Silver Polished Brass Satin ChromePolished Chrome RAL

D11 Electro-Mag Closers

Electro-Mag Closers

Page Page Page Page C3200EM D13 C3300EM D13 C3400EM D14 C3510/50 D14

Security Features

Standards Covers Features & Functions Finishes Electro-Mag Closers sion /////////// Fire New Standard Power Adj. Adj. Backcheck Delayed Hold Arm S G SSS PSS BB ///////////TS PB SC PC RAL sistant Wave Size Latch Sweep Action Open Resitant Guarantee Electro-Mag Closers BS EN 1155

C3200EM ● 10 ●● 2/3/4/5 ●● ● O ST ●●●●●●●●●●

Electro-Mag Closers 4 38 113 C3300EM 3 ● 10 ●● 3/4 ●● O 1, 61, 66 ●●●●●●●●●●

Electro-Mag Closers

C3400EM 484114 ● 10 4 ●● ●1, 61, 66 ●● C3510G for wall and floorfixing 10 N/A N/A N/A N/A N/A N/A N/A N/A N/A C3550G for wall and floorfixing 10 N/A N/A N/A N/A N/A N/A N/A N/A N/A C3510U for concealed fixing 10 N/A N/A N/A N/A N/A N/A N/A N/A N/A C3550U for concealed fixing 10 N/A N/A N/A N/A N/A N/A N/A N/A N/A C3510A with test push button 10 N/A N/A N/A N/A N/A N/A N/A N/A N/A C3550A with test push button 10 N/A N/A N/A N/A N/A N/A N/A N/A N/A

Key: O = Optional Finishes: S = Silver G = Gold SSS = Satin Stainless Steel PSS = Polished Stainless Steel BE = Brown Bronze TS = Textured Silver PB = Polished Brass SC = Satin Chrome PC = Polished Chrome RAL = Various RAL Colours. D12 Electro-Mag Closers

Electro-Mag C3200EM C3300EM C3200EM Standards

• As C3000 except for: 4 38 113 • C3200-EM with electro-magnetic brake stay. BS EN 1155 3 • C3200EM-R with electro-magnetic brake stay and integrated smoke detector with mains receiver. Security Features 39mm 510mm Fire ● ● 32mm Resistant

Guarantee 10 10 102mm

66mm Covers

New Wave ●● 285mm 52mm Standard ●●

Features & Functions

Power 2/3/4/5 3/4

Latch ●● Electro-Mag Sweep ●● Backcheck ● C3300EM Using Jebron Power Unit Delay O

• Successfully type-tested for conformity to all the requirements of BS EN 1155. Hold Open O • Hold-open and free swing door control. • Fixed power BS EN 3/4. Arm ST 1, 61, 66 • Universal fitting - 1 regular, 61 transom, and 66 parallel arm mount. Finish Options • Non-handed. Silver ●● • Latch and closing speed control. 55mm 60mm • Hold-open from 70° to 180°. BS EN 1155 Gold ●● • Closer uses Jebron Power Unit 9870. Satin Stainless Steel ●● 269mm Polished Stainless Steel ●●

Brown Bronze ●●

Textured Silver ●● 92mm Polished Brass ●●

Satin Chrome ●● ●● 260mm Polished Chrome RAL ●●

D13 Electro-Mag Closers

Electro-Mag C3400EM C3400EM Using Dorma Power Unit Standards

• Combination of hydraulic door closer and electro-magnetic hold-open. • Door hold-open at opening angles between 75° and 180°. BS EN 1155 484114 • Suitable for standard doors up to 1250 mm. • Complies with DIN 18263 for fire doors up to 1125 mm. Security Features • Optional free-swing arm assembly. • Closer uses Dorma Power Fire ● BS EN 1155 293mm Resistant Unit TS73EMF.

Guarantee 10

Covers

Standard N/A 60mm New Wave N/A

Features & Functions

45.5mm Power 4

Latch ● Magnets Sweep ● Backcheck C3500 Range from Dorma for Fire Prevention Delay

• C3510G, C3550G for wall and floor fixing. Hold Open ● • C3510U, C3550U for concealed fixing. • C3510A, C3550A with test push button. Arm 1, 61, 66 • Complete with polarity reversal protection. Finish Options • For floor fixing use floor bracket (supplied as accessory). ● • Protector category: IP40, C3510A. C355OA in conjunction Silver with floor bracket: IP43. Gold ● • Power input: 1.5 W. C3510G C3510U C3510A C3550G C3550U C3550A Satin Stainless Steel • Holding Force: 500 Nm C3550G, C3550U, C3550A 100 Nm C3510G, C3510U, C3510A Polished Stainless Steel • The hold-open can also be released by simply giving the Brown Bronze door a sharp tug in the closing direction (100Nm only). Textured Silver • Magnetic armature plates: Polished Brass - CMAG ball jointed, self adjusting to the door opening angle. - CMAT telescopic, for relatively large distances between wall Satin Chrome CMAG and door. Length of travel approx. 20mm. CMAT CMAW Polished Chrome - CMAW, for extreme angles. Adjustment range ±60°. RAL

D14 Floorsprings

BS EN 1154 Classification Features and Functions

This standard classifies door closers using a 6 digit coding system. Each digit relates Single / Double Swing Floor Springs Fire Resistant to a particular feature of the product measured against the standards performance Suitable for use on fire / smoke • Floor mounted door control for single /double swing applications. requirements. doors. • Successfully type-tested for conformity to all the requirements of BS EN 1154. Guarantee Digit 1 - Category of use • Grade 3: For closing doors from at least 105˚. Guarantee period applicable • Grade 4: For closing doors from 180˚ open. when maintenance instructions Electromagnetic Action (4) Universal Fitting followed. Digit 2 - Durability • Grade 8: 500,000 test cycles completed. Variants available. Suitable for left or right hand single action and centre pivoted double action doors. Digit 3 - Test door mass/size Seven grades are identified as shown in the table below where a closer provides a range of power sizes both the minimum and maximum sizes shall Cement Box be shown. Adjustable.

Digit 4 - Fire behaviour • Grade 0: Not suitable for use on fire/smoke doors. Interchangeable Spindles • Grade 1: Suitable for use on fire/smoke doors. Site interchangeable for This is assessed outside of BS EN 1154. ease of installation.

Digit 5 - Safety • Grade 1: All door closers are required to satisfy the essential requirement of safety in use. Universal Cover Plate Adjustable for right or left hand Digit 6 - Corrosion resistance Five grades are identified according to BS EN1670. single hand applications. • Grade 0: No defined corrosion resistance. • Grade 1: Mild resistance. • Grade 2: Moderate resistance. Hydraulic Closing • Grade 3: High resistance 2 speed action from • Grade 4: Very high resistance. approximately 180°. Single Swing Components Double Swing Components Test door mass/size Backcheck (2) Electromagnetic Action Test door mass/size Adjustable Delayed Action (3) Mechanical backcheck Door Closer Test door Recommended door Variants available. power size mass Kg leaf width mm. Selective between at approx 85° and 165°. 180° and 70° (C3700FS) 1 20 750 105° and 75° (C3600FS). Floorspring Actions 2 40 850 3 60 950 Closing Speeds (1) 4 80 1100 15 or 28 Nm (C3700FS) 5 100 1250 15, 32 or 53 Nm (C3600FS). 6 120 1400 7 160 1600 Optional Hold Open (3) 90° standard hold open Example (C3700FS) between 75° and The following marking denotes a closer capable of 175° (C3600FS). opening to at least 105˚, with a power size of 3, which is suitable for use on fire/smoke doors. 383110 Finishes: Polished Brass Satin Stainless Steel Polished Stainless Steel

D15 Floorsprings

Floorsprings

Page Page Page Page C3600FS D17 C3600EM-FS D17 C3700FS D18 C3800FS • C3900FS D18

Security Features

Standards Covers Features & Functions Finishes Floorsprings /////////// osion Fire New Standard Power Adj. Adj. Backcheck Delayed Hold Arm S G SSS PSS BB ///////////TS PB SC PC RAL Wave Size Latch Sweep Action Open Resitant Resistant Guarantee BS EN 1154 Floorsprings

C3600FS 384014 10 n/a n/a 4 ●● ● ●●n/a ●● ●

C3600EM-FS 484114 ● 10 n/a n/a 4 ●● ● ●n/a ●● ● (BS EN 1155)

4 38 114 ● ●● ● ●● ● C3700FS 1 10 n/a n/a 1 - 4 n/a

7 38 014 ●● ● ● ●● ● C3700FS (Hold Open) 5 10 n/a n/a 5 - 7 n/a

Floorsprings

4 38 113 C3800FS 1 ● 10 n/a n/a 1 - 4 ●● ● O n/a ●● ●

C3900FS 384113 ● 10 n/a n/a 4 ●● ● O n/a ●● ●

D16 Floorsprings

Floorsprings C3600FS C3600EM-FS C3600FS Using Dorma Power Unit Standards

• Universal Floorspring for all types of standard doors. BS EN 1154 384014 484114 • Fixed power: BS EN 4. (BS EN 1155) • Non-handed model. Security Features • Adjustable closing speed, (15, 32 or 53Nm). • Mechanical backcheck. Fire Resistant ● • Adjustable latching action. • Floorspring uses Dorma Power Unit BTS80. 341mm Guarantee 10 10

Covers 10 10

60mm New wave n/a n/a

Standard n/a n/a

78mm Features & Functions

Power 4 4

Latch ●●

Sweep ●●

Electro-Mag Floorspring Backcheck ●● C3600EM-FS Using Dorma Power Unit Delay ●

• Complete with electro-hydraulic hold-open. Hold Open ●● • Enables fire and smoke check doors to be held open at opening angles between approx. 75° and 175° with only Arm n/a n/a very slight fall-back. Finish Options • In the event of an alarm or power failure, the hold-open is released and the door closer closes the door. Silver • The hold-open can also be released by simply giving the Gold door a sharp tug in the closing direction. 341mm ●● • Floorspring uses Dorma Power Unit BTS80EMB. Satin Stainless Steel Polished Stainless Steel ●●

Brown Bronze 60mm Textured Silver

Polished Brass ●●

78mm Satin Chrome

Polished Chrome

RAL

D17 Floorsprings

Floorsprings C3700FS C3700FS Using Dorma Power Unit Standards

4 Ideal for all single and double action doors with widths of up to 1100mm. BS EN 1155 38 114 • 1 • Adjustable screw for easy setting of the closing force. • Variable power: BS EN 1 - 4. Security Features • Non-handed model. • Adjustable closing speed, (15 or 28Nm). Fire Resistant ● • Mechanical backcheck. • Optional variant with 90° or 105° hold-open available. • Floorspring uses Dorma Power Unit BTS75V. Guarantee 10 275mm Covers 10 10

New wave n/a

50mm Standard n/a

Features & Functions

82mm Power 1 - 4

Latch ●

Sweep ●

Accessories Backcheck ● Accessories for C3600, C3700 Ranges Delay

Double Action Accessories for Steel, Aluminium and Timber Doors Accessories for Single Action Timber Doors, for Flush Closing Doors Hold Open • Double action top centre. No. C3610DTC • Single action top centre, non-handed. No. C3640STC Arm n/a • Cover plate. No. C3620CP • Single action door straps. No. C3650SDS Finish Options • Double action bottom strap, for door • Standard spindles up to + 50mm weights up to 300kg. No. C3630DAS available on request. Silver Gold

Satin Stainless Steel ●

Polished Stainless Steel ●

Brown Bronze

Textured Silver

Polished Brass ●

Satin Chrome

Polished Chrome

RAL

D18 Floorsprings

Floorspring C3800FS C3800EM-FS C3800FS Using Jebron Power Unit Standards

4 Manually operated universal floorspring for double swing 307mm 38 113 384113 • EN1155 1 and single swing applications. Variable power: BS EN 1 - 4. • Security Features • Non-handed model 180° opening. Adjustable closing speed. 105mm Fire • ● ● • Backcheck at 90°. Resistant • Floorspring uses Jebron Power Unit 2950. Guarantee 10 10

Covers 10 10

50mm New wave n/a n/a

Standard n/a n/a 105mm Features & Functions

Power 1 - 4 4

Electro-Mag Floorspring Latch ●●

C3800EM-FS Sweep ●●

Backcheck ●● • Electro-magnetic floorspring. Accessories: Suitable for both C3800FS and C3800EM-FS • Double action top centre, SS or PB finishes - C3810DTC As C3800FS but with the following additions: Delay OO • Cover plates, SS or PB finishes - C3820CP. - Alarm activated electro-magnetic hold-open, with size 4 power. • Double action strap, zinc plated - C3830DAS. Hold Open - Supplied with 1m conduit and 3m flexible cable complete Single action top centre, SS or PB finishes - C3840STC. with connections. • Arm n/a n/a • Single action strap and cover, SS or PB finishes - C3850SAC. - Operating voltage: 24.V.dc power consumption 2.0w. Finish Options - Not suitable for external or wet area applications. Universal Cover Plate Silver

307mm Single Swing Gold Double Swing Satin Stainless Steel ●●

105mm ●● Series Unit Polished Stainless Steel Brown Bronze

Textured Silver

Cement Polished Brass ●● Box Satin Chrome 50mm FP/SL Polished Chrome

105mm Spindles 5 - 50mm S5 S10 S20 S30 S40 S50 RAL

D19 Automatic Door Systems from

What Type of Door? from In association with Dorma, Chubb are pleased Sliding Doors Swing Doors Space Saving Doors to offer the supply and installation of: Straight Curved Automatic Low Energy Folding Swivelling • Automatic door operators and complete door packages • Revolving doors • Glass partition and door systems

Why specify automatic doors? • Aesthetically pleasing and inviting modern entrance. • Improved access for all door users. • Easy access for those with young children, pushing prams, pushchairs etc. • Unhindered access and increased Straight - ES range Automatic - ED 200 range Folding - FFT independence for people with walking • Available in single sliding, bi-parting or telescopic • ED200 offers a closer with a range of arm types. • Ideal for a restricted opening or awkward layout. difficulties, elderly people and disabled configurations. Optional breakout safety system. • ED200i offers a concealed closer with no arm. people. Swivelling - RST Curved - BST Low Energy - ED800 • Unique swivelling action. • Option of controlled access via remote • Individually designed from gentle curves to semi- • Offers assisted opening of swing doors. • Combines excellent space-saving with elegant operation. curves. • Ideal for use by elderly or disabled people. design. • Option of secure access via cardswipe, numeric keypad etc.

What about safety? Typical Applications All DORMA automatic doors come with comprehensive safety systems as standard to ensure that the doors open and close safely at all times. All DORMA installations are CE certified and are carried out by our qualified engineers to comply with BS 7036.

What about quality? All DORMA automatic door operators are individually and rigorously tested before leaving the manufacturing plant in Ennepetal, Germany (ISO9002/BS 5750 Pt.2.) All DORMA automatic door operators are offered with a 12 month guarantee. DORMA offers a comprehensive range of maintenance programmes covering automatic, manual and industrial doors.

D20 Door Service and Maintenance from

British Standards

from

Dorma offer:

• Wide selection of systems to suit your particular application.

• Maintenance for all door products.

• Nationwide coverage throughout the UK.

• Customer service telephone back-up.

• Guaranteed product.

Why is maintenance important? Every door needs to be maintained if it is to operate correctly and safely. It reduces breakdowns and inconvenience. “To ensure safe operation, long term reliability and working efficiency, a powered door “Self closing devices should be examined at six monthly intervals to ensure installation (including safety devices and safety systems) should be: that the door is closing properly and any necessary adjustments made to the If a preventable accident occurs you could be 1. Regularly maintained to the manufacturer’s specification by the powered door closing and latching speeds”. held accountable. system authorised technician. British Standard BSB214 “Building Components (Ironmongery) It makes economic sense reducing the long term 2. Annually inspected in accordance with the recommendations of this standard by cost of operating the door. completion of the authorised technician checklist...” British Standard BS7036 April 1996 “Safety at powered doors for pedestrian use”

Notes Door Closers

Notes

D22 Door Closers

Notes

D23 Escape Hardware • Outside Access Device • • • Single Panic Bolt • Double Rebated Push Pad Latch Panic Set EscapePanic Latch Hardware Escape Hardware

Escape Hardware Introduction How to Specify Security Features

Index Chubb offer a comprehensive range of Escape Chubb have developed a series of icons to enable 1 Hardware which are ideal for commercial and the process of product specification to be simplified. Protected Section • Introduction E2 Products are available as an option on a industrial use. From today you can specifically detail your patented key section. The range includes variants for single doors and requirements for a product, therefore ensuring that • BS EN 1125 Classification E3 2 double rebated doors as well as outside access it includes particular security features. devices. Drill Resistant • BS EN 179 Classification E3 Example 1: If you require a panic bolt for a double Hardened protection against drill attack. A comprehensive choice of finishes are available to rebated door that has a 10 year Guarantee, look for • Features and Functions E3 meet customer requirements. the Guarantee icon (number 12) in the range table 3 on page 4 and then on subsequent pages where Saw Resistant • Photo Gallery E4 further information is supplied. Hardened protection against saw attack. Chubb is accredited with and Example 2: If this panic bolt then needs to provide • Range Table E4 meets the requirements of 4 particular resistance to Corrosion, look for icon 8. BS EN ISO 9001: 1994. • Single Panic Bolt E5 Force Resistant Chubb, Simplifying the Specification Process. Built in strength against force attack.

• Double Rebated Panic Set E5 5 • Panic Latch E6 Pick Resistant Built in protection to resist picking. • Panic Pad Latch E6 Keying Groups Standards & Approvals 6 • Outside Access Devices E6 Throughout the catalogue you will see a column Torque Resistant headed. Built in strength against torque attack. • Notes Page E7 Key Control 7 Pan-European standard which classifies panic exit devices. Tamper Resistant The information shown under this heading can Built in protection against Tampering. help you identify which products can be Keyed 8 Alike or Masterkeyed. BS EN 1125 Corrosion Resistant Products conform to appropriate The products that can be keyed to work with other anti-corrosion requirements. products are given a group code. 9 KA - means the product can be Keyed Alike with Fire Resistant Products conform to appropriate fire test more of the same product. Pan-European standard which classifies requirements. emergency exit devices. MK - means the product can be Masterkeyed with 10 more of the same product. Escape Products for use on an escape door. A Group Letter (eg A) means the product can be BS EN 179 Note: We have made every effort to ensure that at Keyed Alike or Masterkeyed with more of the same 11 the time of going to print all information shown in product and with other products listed in the same Key Control The products can be included in a key this catalogue is correct. However, in our efforts to group. continually improve our products and offer only the control system. highest levels of security and quality we reserve the right to make alterations to the product For the complete range of products and their Keys 12 specifications shown in this catalogue. All keying groups, see the chart in the introduction Guarantee dimensions provided within this catalogue are section. 2 keys are supplied as standard, however see the Products are guaranteed for a period of approximate and for guidance only. time. price list for any variations.

E2 Escape Hardware

BSEN1125 Classification Features and Functions Escape Hardware This standard classifies panic exit devices by using a 9 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements. Products that meet BS EN 179 (i.e. emergency exit device) should only be used where building occupants are familiar with the emergency exit and its hardware and where panic situations are not foreseen. If there is any doubt about conditions relating Digit 1 - Category of use to the building occupancy, then devices covered by BS EN 1125 (i.e. Panic devices) should be used. • Grade 3: High frequency use by public and others with little incentive to exercise care. Digit 2 - Durability Types of Escape Hardware Protected Section • Grade 6: 100,000 test cycles completed. • Grade 7: 200,000 test cycles completed. Product can be used on a patented key system, (outside access device only). Digit 3 - Test door mass/size Single Panic Bolt • Grade 5: Up to 100kg. • Grade 6: Up to 200kg. Two point locking for single doors. Tamper Protection Digit 4 - Fire behaviour Concealed fixings (outside access • Grade 0: Not approved for use on fire/smoke door assemblies. devices only). • Grade 1: Suitable for use on fire/smoke door assemblies. This is assessed outside of EN1125. Double Rebated Panic Set Digit 5 - Safety For double rebated doors. Corrosion Resistant Products meet Grade 3 according to • Grade 1: All exit devices are required to satisfy the essential requirement of safety in use. EN1670. Digit 6 - Corrosion resistance Panic Pad Latch Two grades are identified according to EN1670. Single point locking for single doors. • Grade 3: High resistance. • Grade 4: Very high resistance. Digit 7 - Security • Grade 2 Panic devices are primarily for the operation of a door from the inside. Safety Push Pad Latch Emergency escape device considerations will always be given priority over security. for single doors. Digit 8 - Projection of device • Grade 1: Projection up to 150mm (standard). • Grade 2: Projection up to 100mm (low projection). Digit 9 - Type of device • Type A: Panic device with push bar operation. • Type B: Panic device with touch bar operation. Example The following marking denotes a panic exit device 376 11 42 2B tested to 200,000 operations for a door mass up to Fire Resistant 200kg. Suitable for fire door use with high corrosion resistance and low push bar projection. Suitable for use on fire / smoke door Outside Access Devices assemblies.

Oval Square BSEN179 Classification Knob Knob Escape Handle Handle Products for use on escape door. Classification for BS EN 179 as BS EN 1125 above with the exception of points below. Digit 4 - Fire behaviour Dogging Key Control • Grade 1: Suitable for use on fire/smoke door assemblies. This is assessed outside of EN179. Products can be masterkeyed or keyed Once the pushbar has been alike (outside access devices). Digit 7 - Security depressed the bolts are Devices to provide resistance to: held in the open position Guarantee • Grade 2: 1,000N. • Grade 3: 2,000N. • Grade 4: 3,000N. until the door is closed. Guarantee period applicable when Digit 9 - Type of device used with original Chubb keys (outside access devices) and maintenance • Type A: Emergency device with lever handle operation. Universal Handing instructions followed. • Type B: Emergency device with push pad operation. Product is suitable for left or right Example hand doors, (outward opening only). The following marking denotes an emergency exit device tested to 200,000 operations for a door mass 376 11 32 2B up to 200kg. Suitable for fire door use with high corrosion resistance and low push bar projection. Finishes: Silver Gold //////////////////Textured Silver Polished Brass Satin Chrome Polished Chrome RAL

E3 Escape Hardware

Escape Hardware

Page Page Page Page Page C801 E5 C802 E5 C803 E6 C804 E6 C805 • C806 E6

Security Features

Standards Features & Functions Finishes Escape Hardware ///////////////Tetured Polished Satin Polished Silver Gold RAL Fire Key //////////////Silver Brass Chrome Chrome Tamper Escape Protected Corrosion Resitant Control Universal ‘Dogging’ Rebated BS EN1125 BS EN179 Section Resistant resistant Guarantee Handed Doors Single Panic Bolt

C801 3 7 6 1 1 3 2 2 A n/a n/a ●● ●n/a 10 ● ● ● ● ● ● ● ● ●

Double Rebated Panic Set

C802 3 7 6 0 1 3 2 2 A n/a n/a ●●n/a 10 ● ●● ● ● ● ● ● ● ●

Panic Latch

C803 3 7 6 1 1 3 2 2 A n/a n/a ●● ●n/a 10 ● ● ● ● ● ● ● ●

Push Pad Latch

C804 3 7 6 1 1 3 4 2 B n/a n/a ●● ●n/a 10 ● ● ● ● ● ● ● ●

Outside Access Devices

C805 O ●● ●A10 ● ● ● ● ● ● ● ● C806 O ●● ●A10 ● ● ● ● ● ● ● ● Key: A = Masterkey Grouping E4 Escape Hardware

Single Panic Bolt C801 C802 C801 Standards

• Suitable for outward opening doors. BS EN 1125 3 7 6 1 1 3 2 2 A 3 7 6 0 1 3 2 2 A • Suitable for timber and metal doors. • Non-handed for maximum flexibility. • Can be operated from outside with outside BS EN 179 access device. 55mm • Self adjusting trip action device. Security Features • 20mm top and bottom bolt throw. 155mm Protected Section n/a n/a 2440mm Tamper Resistant n/a n/a

98mm Corrosion resistant ● ●

Fire ● 840mm Resistant

Escape ● ●

Key n/a n/a Double Rebated Panic Set Control Guarantee C802 10 10 Features & Functions • Suitable for use on double rebated outward opening doors. • Suitable for timber and metal doors. Universal Handed ●● • Non-handed for maximum flexibility. ‘Dogging’ ●● • Can be operated from outside with outside access device. ● • Self adjusting trip action device. Rebated Doors 55mm 55mm 55mm Finishes

Silver ●●

155mm Gold ●●

//////////////////////////////////Textured Silver ●● 98mm Polished Brass ●●

Satin Chrome ●●

2440mm Polished Chrome ●● 840mm 840mm RAL ●●

E5 Escape Hardware

Panic LatchStandards Panic Pad Latch C803 C804 C805 C806 C803 C804 Standards

• Suitable for outward opening doors. • Suitable for outward opening doors. BS EN 1125 3 7 6 1 1 3 2 2 A • Suitable for timber and metal doors. • Suitable for timber and metal doors. • Non-handed for maximum flexibility. • Non-handed for maximum flexibility. • Can be operated from outside with outside access device. • Can be operated from outside with outside access BS EN 179 3 7 6 1 1 3 4 2 B Security Featuresdevice. Security Features 55mm 55mm 55mm Protected ● ● Section n/a n/a

Tamper ● ● 155mm Resistant n/a n/a 155mm

Corrosion ● ● ● ● resistant

840mm 98mm Fire ● ● Resistant

Escape ● ● ● ●

Key n/a n/a A A Outside Access Device Control Guarantee 10 10 10 10 C805 C806 Features & Functions • Non-handed for maximum flexibility. • Non-handed for maximum flexibility. • Oval knob handle for easy operation. • Square style knob handle for easy operation. Universal Handed ●● ●● • Suitable for use with C801, C802, C803, and C804. • Suitable for use with C801, C802, C803, and C804. ‘Dogging’ • Concealed fixing. • Concealed fixing. Finish Options Rebated Doors

60mm 29mm 60mm 32mm Finishes

Silver ●●●●

Gold ●●●●

136mm //////////////////////////////////Textured Silver ●●●● 136mm Polished Brass ●●●●

Satin Chrome ●●●●

78mm Polished Chrome ●●●● 74mm

RAL ●●●●

E6 • Brass

• Stainless Steel

• Zinc Plated

• Electro Brassed

• Colour Coated Hinges

Hinges Hinges

Hinges Index Introduction How to Specify Standards & Approvals

Chubb offer a comprehensive range of hinges Chubb have developed a series of icons to enable the Products endorsed with the Kitemark have • Introduction H2 for both architectural specification and process of product specification to be simplified. passed a strict testing procedure under the residential use. control of the British Standards Institution. • BS7352: 1990 H3 From today you can specifically detail your These include Steel, Stainless Steel, Brass and requirements for a product, therefore ensuring that it • Features & Functions H3 heavy duty variants to suit various weights of includes particular security features. doors. • Photo Gallery H4 Example: 1) If you require a hinge that conforms to BS7352, • Range Table H5 simply check the standards column to see which grades are available. • Product Details H6-9 2) If this hinge then needs to provide particular • Notes H10-11 resistance to fire, look for icon number 9.

BS7352: 1990 Chubb, Simplifying the Specification Process. Chubb is accredited with and meets the requirements of BS EN ISO 9001: 1994

Security Features

1 5 9 Protected Section Fire Resistant Products are available as an option on a Pick Resistant Products conform to appropriate fire Built in protection to resist picking. patented key section. test requirements.

2 6 10 Drill Resistant Torque Resistant Escape Hardened protection against drill attack. Built in strength against torque attack. Products for use on an escape door.

3 7 11 Key Control Saw Resistant Tamper Resistant The products can be included in a key Hardened protection against saw attack. Built in protection against Tampering. control system. Note: We have made every effort to ensure that at the time of going to print all information shown in this catalogue is correct. However, in our efforts to continually improve our products and offer only the 4 8 12 highest levels of security and quality we reserve the right to make alterations to the product Corrosion Resistant Guarantee Force Resistant Products conform to appropriate Products are guaranteed for a period of specifications shown in this catalogue. All Built in strength against force attack. dimensions provided within this catalogue are anti-corrosion requirements. time. approximate and for guidance only.

H2 Hinges

BS7352:1990 Features and Functions

Classification of Hinges Washer Type Max. Weight Max. Annual Washered hinges are of a Class of Door Operations high grade and recommended for 1 10KG 5,000 medium to heavy duty 2 20KG 5,000 applications. 3 20KG 25,000 4 40KG 25,000 5 40KG 200,000 6 40KG 500,000 Ball Bearing 7 60KG 500,000 Ball bearing hinges are of a very high grade and are 8 80KG 200,000 recommended for use with door closers and 9 120KG 200,000 heavy duty applications

• BS7352 Classification applies when 3 hinges are fitted. Fire Resistant • When non backcheck closers are fitted 20% Pin Material Products successfully completed must be added to the effective door weight and a fire test. The choice of material for the hinge, the weight should be doubled when a pin is dependant on the environment Guarantee ‘backcheck’ closer is fitted. Guarantee period applicable in which the hinges are to be fitted. when maintenance and instructions followed.

Key Finishes Aluminium Self Colour Polished Brass Stainless Steel Polished Stainless Steel D.S.W. = Double Steel Washered

D.S.S.W. = Double Stainless Steel Washered Chrome Zinc Plate Electro Brass Brown RAL 8017 Red RAL 3003 D.P.B.W. = Double Phosphor Bronze Washered Dark Red RAL 3005 Green RAL 6016 Yellow RAL 1004 Light Grey RAL 7038 Dark Grey RAL 7043 H.D. = Heavy Duty

Black RAL 9005 White RAL 9016 Blue RAL 5002 Dark Blue RAL 5003

H3 Hinges

Self Colour Solid Self Colour H.D. Solid Drawn Polished Brass Solid Drawn P.B. Self Colour Solid Drawn Drawn Brass Butt Solid Drawn Brass Butt Butts c/w Screws Counter Flap Hinge Brass Stormproof Butt

3 CH500/1 = 1” x /4” CH502/1 = 1” x 3/4” 1 2 7 8 CH500/2 = 1 / ” x / ” 1 7 CH500/3 = 2” x 11/8” CH502/2 = 1 /2” x /8” CH500/4 = 21/2” x 13/8” CH502/3 = 2” x 11/8” 5 CH501/1 = 3” x 15/8” CH500/5 = 3” x 1 /8” 1 3 1 3 CH502/4 = 2 /2” x 1 /8” CH504 = 2 /2” CH500/6 = 4” x 2 /8” CH501/2 = 4” x 25/8” CH500/7 = 4” x 25/8” CH502/5 = 3” x 15/8” CH500/8 = 4” x 3” CH502/6 = 3” x 2” CH500/9 = 5” x 3” CH503 = 11/4” x 4” CH500/10 = 6” x 3” CH502/7 = 4” x 25/8” Page Page Page Page Page P CH500 H6 CH501 H6 CH502 H6 CH503 H6 CH504 H6

Solid Drawn Polished Brass Self Colour D.S.W. D.P.B.W. Polished D.S.S.W. Aluminium Parliament Hinge Brass Butts Polished Brass D.S.W. Butts Brass Butts Butts c/w Screws

CH508/1 = 3” x 2” CH506/1 = 3” x 2” CH507/1 = 3” x 2” CH509/1 = CH505/1 = 4” x 2” x 4mm CH508/2 = 4” x 25/8” CH506/2 = 4” x 25/8” CH507/2 = 4” x 25/8” 3” x 2” x 3mm CH505/2 = 4” x 3” x 5mm CH508/3 = 4” x 3” CH506/3 = 4” x 3” CH507/3 = 4” x 3” CH509/2 = CH505/3 = 4” x 4” x 6mm CH508/4 = 4” x 4” CH506/4 = 5” x 3” CH507/4 = 5” x 3” 4” x 25/8” x 3mm CH508/5 = 6” x 4”

Page Page Page Page Page P CH505 H6 CH506 H7 CH507 H7 CH508 H7 CH509 H7

D.S.S.W. Polished D.P.B.W. Polished 4 Ball Bearing Brass Stainless Steel Plain Butts S. Steel Washered Brass Butts Brass Butts Butts c/w Screws c/w Screws Butts c/w Screws

CH510/1 = CH511/1 = 3” x 2” x 3mm 3” x 2” x 3mm CH512/1 = CH513/1 = CH510/2 = CH511/2 = 4” x 3” x 3mm 3” x 2” x 1.5mm CH514 = 4” x 25/8” x 3mm 4” x 25/8” x 3.5mm CH512/2 = CH513/2 = 4” x 3” x 2mm CH510/3 = CH511/3 = 4” x 4” x 3mm 4” x 3” x 2mm 4” x 3” x 4mm 4” x 3” x 4mm

Page Page Page Page Page P P CH510 H7 CH511 H7 CH512 H8 CH513 H8 CH514 H8

S. Steel 2 Ball Bearing Chrome Plated D.P.B.W. Light Butts Z.P. - E.B. Strong Butts Z.P. - E.B. Rising Butt Hinge Butt c/w Screws Butts c/w Screws or Colour Coated or Colour Coated Z.P. and E.B.

CH515/1 = CH516/1 = 4” x 3” x 2.5mm 3” x 2” x 3mm CH517/1 = 3” x 2” CH518/1 = 3” x 2” CH519/1 = 3” x 23/4” CH515/2 = CH516/2 = CH517/2 = 4” x 25/8” CH518/2 = 4” x 25/8” CH519/2 = 4” x 23/4” 4” x 3” x 3mm 4” x 25/8” x 3mm

Page Page Page Page Page P P CH515 H8 CH516 H8 CH517 H8 CH518 H9 CH519 H9 *Details of metric sizes are supplied on page H9. H4 Security Features

Standards Features/ Functions Finishes

Hinges Polished Brass Stainless Steel Handed C.W. RAL Self Polished Zinc Electro Stainless Chrome Stainless Aluminium Fire Pins Pins Pins Screws Colours Colour Brass Plate Brass Steel Plated Resitant Steel Guarantee BS7352 Hinges

CH500 Self colour solid drawn brass 1

CH501 Self colour heavy duty solid drawn brass 1

CH502 Solid drawn polished brass butts 1

CH503 Solid drawn polished brass counter flap hinge 1

CH504 Self colour solid drawn brass stormproof butt 1

CH505 Solid drawn polished brass parliament hinge 1

CH506 Self colour D.S.W. brass butts 1

CH507 Polished brass D.S.W. butts 1

CH508 Polished brass D.P.B.W. butts 1

CH509 D.S.S.W. Aluminium butts 1

CH510 D.S.S.W. Polished brass butts 8 ❒ 2

CH511 D.P.B.W. Polished brass butts ❒ 2

CH512 4 Ball bearing pol. brass butts 8 ❒ 3

CH513 Stainless Steel; plain butts ❒ 2

CH514 Stainless Steel washered butts 3

CH515 Stainless Steel 2 ball bearing butts 8 ❒ 3

CH516 Chrome plated D.P.B.W. butts screws 2

CH517 Light butts 1

CH518 Strong butts 1

CH519 Rising butt hinge 1

Key: Fire Resistant - ❒ = Depending on specific variant. D.S.W. = Double Steel Washered D.S.S.W. = Double Stainless Steel Washered D.P.B.W. = Double Phosphor Bronze Washered H.D. = Heavy Duty

H5 Hinges

Hinges CH500 CH501 CH502 CH503 CH504 CH505 CH500 - Self Colour Solid Drawn Brass Butt CH503 - Solid Drawn P.B. Counter Flap Hinge Standards

Classification Line No. A B Line No. A B 3 CH500/1 1” /4” CH503 11/4”4” CH500/2 13/4” 7/8” Security Features B CH500/3 2” 11/8” CH500/4 21/2”13/8” Fire Resitant CH500/5 3” 15/8” B CH500/6 4” 23/8” 5 CH500/7 4” 2 /8” A Guarantee 1 year 1 year 1 year 1 year 1 year 1 year CH500/8 4” 3” A CH500/9 5” 3” Features CH500/10 6” 3” Brass Pins ● ●●●●●

Steel Pins CH501 - Self Colour H.D. Solid Drawn Brass Butts CH504 - S.C. Solid Drawn Brass Stormproof Butt Stainless pins Line No. A B Line No. A CH501/1 3” 15/8” CH504 21/2” c/w Screws ● 5 CH501/2 4” 2 /8”. B

Handed

Finishes A A RAL Coloured

Self Colour ●● ●

Polished Brass ●● ●

CH502 - Solid Drawn Pol. Brass Butts c/w Screws CH505 - Solid Drawn Pol. Brass Parliament Hinge Zinc Plate

Line No. A B Line No. A B C Electro Brass CH502/1 1” 3/4” CH505/1 4” 2” 3mm CH502/2 11/2” 7/8” B CH505/2 4” 3” 5mm CH502/3 2” 11/8” CH505/3 4” 4” 6mm Stainless Steel CH502/4 21/2”13/8” CH502/5 3” 15/8” B Polished Stainless Steel CH502/6 3” 2” A CH502/7 4” 25/8” A Chrome

Aluminium C

H6 Hinges

Hinges CH506 CH507 CH508 CH509 CH510 CH511 CH506 - Self Colour D.S.W. Brass Butts CH509 - D.S.S.W. Aluminium Butts c/w Screws Standards

Classification 8 Line No. A B Line No. A B C CH506/1 3” 2” CH509/1 3” 2” 3mm B Security Features CH506/2 4” 25/8” CH509/2 4” 25/8” 3mm B CH506/3 4” 3” Fire ❒ ❒ CH506/4 5” 3” Resistant

A A Guarantee 1 year 1 year 1 year 1 year 2 years 2 years

Features

C Brass Pins ● ●

Steel Pins ● ● CH507 - Polished Brass D.S.W. Butts CH510 - D.S.S.W. Polished Brass Butts Stainless pins ● ● Line No. A B Line No. A B C CH507/1 3” 2” CH510/1 3” 2” 3mm ● B B c/w Screws CH507/2 4” 25/8” CH510/2 4” 25/8” 3mm CH507/3 4” 3” CH510/3 4” 3” 4mm Handed CH507/4 5” 3” CH510/3: Fire Tested

A A Finishes

RAL Coloured

C Self Colour ●

Polished Brass ●● ●●

CH508 - D.P.B.W. Polished Brass Butts CH511 - D.P.B.W. Polished Brass Butts Zinc Plate

Line No. A B Line No. A B C CH508/1 3” 2” CH511/1 3” 2” 3mm Electro Brass B B CH508/2 4” 25/8” CH511/2 4” 25/8” 3.5mm CH508/3 4” 3” CH511/3 4” 3” 4mm Stainless Steel CH508/4 4” 4” CH511/3: Fire Tested CH508/5 6” 4” A A Polished Stainless Steel

Chrome

C Aluminium ●

H7 Hinges

Hinges CH512 CH513 CH514 CH515 CH516 CH517 CH512 - 4 Ball Bearing Brass Butts c/w Screws CH515 - S. Steel 2 Ball Bearing Butt c/w Screws Standards

Line No. A B C Line No. A B C Classification 88 CH512/1 4” 3” 3mm CH515/1 4” 3” 2.5mm CH512/2 4” 4” 3mm CH515/2 4” 3” 3mm Security Features B B CH512/1: Fire Tested CH515/1: Fire Tested Fire ❒ ❒ ● ❒ Resistant

A A Guarantee 3 years 2 years 3 years 3 years 2 years 1 year

Features

C C Brass Pins ● ●

Steel Pins ● CH513 - S. Steel Plain Butts c/w Screws CH516 - Chrome Plated D.P.B.W. Butts c/w Screws Stainless pins ● ● ● Line No. A B C Line No. A B C CH513/1 3” 2” 1.5mm CH516/1 3” 2” 3mm c/w Screws ● ● ● ● ● CH513/2 4” 3” 2mm CH516/2 4” 25/8” 3mm B CH513/2: Fire Tested B Handed

Finishes A A RAL Coloured ●

Self Colour C C

Polished Brass ●

CH514 - S. Steel Washered Butts c/w Screws CH517 - Light Butts Z.P. - E.B. or Colour Coated Zinc Plate ●

Line No. A B C Line No. A B Electro Brass ● CH514 4” 3” 2mm CH517/1 3” 2” B CH517/2 4” 25/8”. CH514: Fire Tested B Stainless Steel ●●●

Polished Stainless Steel A A

Chrome ●

C Aluminium

H8 Hinges

Hinges CH518 CH519 CH518 - Strong Butts Z.P. E.B. or Colour Coating CH519 - Rising Butt Hinge Z.P. and E.B. Standards

Classification Line No. A B Line No. A B CH518/1 3” 2” CH519/1 3” 23/4” Security Features CH518/2 4” 25/8”. CH519/2 4” 23/4”.

Fire B B Resistant

Guarantee 1 year 1 year A A

Features

Brass Pins

Details of metric sizes Steel Pins ● ● MM MM MM CH500 CH500/1 25.4 x 19.05 CH506 CH506/1 76.2 x 50.8 CH513 CH513/1 76.2 x 50.8 x 1.5 Stainless pins CH500/2 38.1 x 22.22 CH506/2 101.6 x 66.67 CH513/2 101.6 x 76.2 x 2 CH500/3 50.8 x 28.57 CH506/3 101.6 x 76.2 c/w Screws CH500/4 63.5 x 34.92 CH506/4 127 x 76.2 CH514 CH514 101.6 x 76.2 x 2 CH500/5 76.2 x 41.27 ● CH500/6 101.6 x 60.32 CH507 CH507/1 76.2 x 50.8 CH515 CH515/1 101.6 x 76.2 x 2.5 Handed CH500/7 101.6 x 66.67 CH507/2 101.6 x 66.67 CH515/2 101.6 x 76.2 x 3 CH500/8 101.6 x 76.2 CH507/3 101.6 x 76.2 Finishes CH500/9 127 x 76.2 CH507/4 127 x 76.2 CH516 CH516/1 76.2 x 50.8 x 3 ● CH500/10 152.4 x 76.2 CH516/2 101.6 x 66.67 x 3 RAL Coloured CH508 CH508/1 76.2 x 50.8 CH501 CH501/1 76.2 x 41.27 CH508/2 101.6 x 66.67 CH517 CH517/1 76.2 x 50.8 Self Colour CH501/2 101.6 x 66.67 CH508/3 101.6 x 76.2 CH517/2 101.6 x 66.67 CH508/4 101.6 x 101.6 Polished Brass CH502 CH502/1 25.4 x 19.05 CH508/5 152.4 x 101.6 CH518 CH518/1 76.2 x 50.8 CH502/2 38.1 x 22.22 CH518/2 101.6 x 66.67 CH502/3 50.8 x 28.57 CH509 CH509/1 76.2 x50.8 x 3 Zinc Plate ● ● CH502/4 63.5 x 34.92 CH509/2 101.6 x 66.67 x 3 CH519 CH519/1 76.2 x 69.85 CH502/5 76.2 x 41.27 CH519/2 101.6 x 69.85 Electro Brass ● ● CH502/6 76.2 x 50.8 CH510 CH510/1 76.2 x 50.8 x 3 CH502/7 101.6 x 66.67 CH510/2 101.6 x 66.67 x 3 Stainless Steel CH510/3 101.6 x 76.2 x 4 CH503 CH503 31.75 x 101.6 CH511 CH511/1 76.2 x 50.8 x 3 Polished Stainless Steel CH504 CH504 63.5 CH511/2 101.6 x 66.67 x 3.5 CH511/3 101.6 x 76.2 x 4 Chrome CH505 CH505/1 101.6 x 50.8 x 4 CH505/2 101.6 x 76.2 x 5 CH512 CH512/1 101.6 x 76.2 x 3 CH505/3 101.6 101.6 x 6 CH512/2 101.6 x 101.6 x 3 Aluminium

H9 Welcome to the Chubb CD catalogue - We hope you will find it useful. If you have not already done so, please take a minute to fill in, print and send this reply-paid form which will ensure that you are kept up to date with future issues.

We look forward to hearing from you

Yours faithfully

Iain MacKenzie Marketing Manager

Yale Security Products UK Limited, Wood Street, Willenhall, West Midlands, England, WV13 1LA Tel: +44 (0) 1902 366 911 Fax: +44 (0) 1902 368 535, www.chubblocks.co.uk email: [email protected]

1 fold first ------

If you do not return the reply form you will not receive updates or replacements in the future.

Click on a dotted lined field below, type in the information and when complete press the Print button. Select 'Current Page' in the Print dialogue box before pressing 'OK'. Fold on the lines shown, staple the bottom and post.

Your details:

Title ...... Initial ...... Surname ...... Company ...... Position ...... Address ...... Town ...... County ...... Post Code ...... Tel: ...... Fax: ...... Email: ......

Chubb ® is a registered Trademark. © 2000 Yale Security Products UK Ltd. All rights reserved.

1 fold second ------

BUSINESS REPLY SERVICE Licence No. WV 500

Marketing Department Yale Security Products UK Limited PO BOX 196 WILLENHALL West Midlands WV13 1BR BUSINESS REPLY SERVICE Licence No. WV 500

Staple here ------Wood Street, Willenhall, West Midlands, United Kingdom, WV13 1LA Tel: +44 (0) 1902 366 911 Fax: +44 (0) 1902 368 535 www.chubblocks.co.uk

C/H/00/01-1