Comparison of 125 Open Spec, Hacker Friendly Single Board Computers -- June 2019
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Cubietruck – Mini PC
SPRZĘT Cubietruck – mini PC Rynek komputerków jednopłytkowych opartych o procesory ARM zapoczątkowany przez Raspberry Pi rozwija się doskonale. Może nie jak grzyby po deszczu, ale systematycznie pojawiają się nowe rozwiązania: BeagleBoard, Marsboard, Cubieboard, Olinuxino itp. Różnią się one wyposażeniem, wydajnością, dostępnością dokumentacji oraz wsparciem technicznym. Ciekawie rozwija się propozycja Cubieboard. mocujących. Niby nic, ale te trzy kawałki two- org, zapoczątkowana płytką Cubieboard A10 rzywa i paczka tulejek umożliwiają poskładanie Fotografi a 3. Obudowa Cubietruck (opisaną w EP06/2013) i Cubieboard2 zgod- samodzielnego systemu mini-PC wyposażo- ną mechanicznie, ale zbudowaną w oparciu nego w dysk HDD 2,5”, wystarczająco zabez- rolę domowego centrum multimedialnego lub o nowszy, dwurdzeniowy procesor A20, zwięk- pieczając mechanicznie jego elementy. Osłony Linuxowego komputera PC. Jedyne zastrzeżenie szający wydajność Cubie i paletę jej zastosowań w odpowiednich miejscach mają wyfrezowane można mieć do kilku różnokolorowych LED, (fotografi a 1). Najnowsza propozycja to Cubie- otwory umożliwiające korzystanie z GPIO bez bezlitośnie informujących nasze oczy o stanie truck (Cubieboard3), oparty podobnie jak Cu- zdejmowania obudowy. pracy Cubie. bieboard2 (fotografi a 2) o procesor Allwinner Ciekawą propozycją dla osób wykorzy- Cubieboard3 oparty jest o SoC w architektu- A20, lecz mający znacznie bogatsze wyposaże- stujących Cubieboard3 w roli samodzielnego rze ARM7 – Allwinner A20, który w połączeniu nie, co niestety wiąże się z wyższą ceną. Porów- mini-PC, jest pełna obudowa pokazana na fo- ze sporej wielkości dyskiem NAND Flash oraz nanie parametrów poszczególnych komputer- tografi i 3. W swoim wnętrzu mieści swobodnie zwiększoną pamięcią RAM bezproblemowo ków Cubieboard umieszczono w tabeli 1. płytkę Cubieboard3, dysk HDD 2,5” (fotogra- sprawdza się w roli komputera PC pracującego Podobnie jak w przypadku poprzednich fi a 4) i przewody połączeniowe. -
Reverse Engineering Power Management on NVIDIA Gpus - Anatomy of an Autonomic-Ready System Martin Peres
Reverse Engineering Power Management on NVIDIA GPUs - Anatomy of an Autonomic-ready System Martin Peres To cite this version: Martin Peres. Reverse Engineering Power Management on NVIDIA GPUs - Anatomy of an Autonomic-ready System. ECRTS, Operating Systems Platforms for Embedded Real-Time appli- cations 2013, Jul 2013, Paris, France. hal-00853849 HAL Id: hal-00853849 https://hal.archives-ouvertes.fr/hal-00853849 Submitted on 23 Aug 2013 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Reverse engineering power management on NVIDIA GPUs - Anatomy of an autonomic-ready system Martin Peres Ph.D. student at LaBRI University of Bordeaux Hobbyist Linux/Nouveau Developer Email: [email protected] Abstract—Research in power management is currently limited supported nor documented by NVIDIA. As GPUs are leading by the fact that companies do not release enough documentation the market in terms of performance-per-Watt [3], they are or interfaces to fully exploit the potential found in modern a good candidate for a reverse engineering effort of their processors. This problem is even more present in GPUs despite power management features. The choice of reverse engineering having the highest performance-per-Watt ratio found in today’s NVIDIA’s power management features makes sense as they processors. -
Monitoring Dan Kontrol Sistem Irigasi Berbasis Iot Menggunakan Banana Pi
JURNAL TEKNIK ITS Vol. 7, No. 2, (2018) ISSN: 2337-3539 (2301-9271 Print) A288 Monitoring dan Kontrol Sistem Irigasi Berbasis IoT Menggunakan Banana Pi Andrie Wijaya, dan Muhammad Rivai Departemen Teknik Elektro, Fakultas Teknologi Elektro, Institut Teknologi Sepuluh Nopember (ITS) e-mail: [email protected] Abstrak— Saat ini metode pengaliran air atau irigasi dilakukan memperhatikan kondisi kelembaban tanah juga mengakibatkan secara manual. Petani harus menyiram tanaman satu persatu penggunaan air yang tidak tepat. Penggunaan air yang sehingga tidak efisien dalam hal energi, waktu, dan ketersediaan berlebihan akan mempengaruhi ketersediaan sumber air yang air sehingga dapat menurukan hasil panen. Internet of Things semakin menurun. merupakan konsep dan metode untuk kontrol jarak jauh, Tugas akhir ini bertujuan untuk menciptakan sistem monitoring, pengiriman data, dan berbagai tugas lainnya. IoT terhubung dengan suatu jaringan sehingga dapat di akses di irigasi berbasis internet of things [2][3], dan [4]. Pada sistem mana saja yang dapat mempermudah berbagai hal. IoT dapat ini petani dapat memonitoring kondisi kelembaban tanah dan dimanfaatkan di berbagai bidang, salah satunya adalah bidang mengkontrol debit air yang akan disiram pada tanaman pertanian. Pada bidang ini IoT dapat digunakan untuk memantau Sehingga meningkatkan hasil panen dan mengoptimalkan dan mengatur berbagai hal untuk menunjang pertanian. Pada penggunaan air. penelitian ini akan dibuat suatu peralatan yang digunakan untuk Sistem ini menggunakan sensor kelembaban tanah atau monitoring dan kontrol sistem irigasi berbasis IOT. Single Board higrometer [5][6]yang akan di proses di Single Board Computer Banana Pi digunakan sebagai prosesor utama yang Computer (SBC) Banana Pi [7]. SBC yang terhubung dengan terhubung dengan jaringan internet yang mengirim data dari sensor ke pengguna. -
Alberta Government Services ______Corporate Registry ______
Alberta Government Services ____________________ Corporate Registry ____________________ Registrar’s Periodical REGISTRAR’S PERIODICAL, SEPTEMBER 15, 2006 ALBERTA GOVERNMENT SERVICES Corporate Registrations, Incorporations, and Continuations (Business Corporations Act, Cemetery Companies Act, Companies Act, Cooperatives Act, Credit Union Act, Loan and Trust Corporations Act, Religious Societies’ Land Act, Rural Utilities Act, Societies Act, Partnership Act) 0751152 B.C. LTD. Other Prov/Territory Corps 1256866 ALBERTA LTD. Numbered Alberta Registered 2006 AUG 11 Registered Address: 600, Corporation Incorporated 2006 AUG 14 Registered 12220 STONY PLAIN ROAD, EDMONTON Address: 314 CARMICHAEL WYND, EDMONTON ALBERTA, T5N 3Y4. No: 2112610379. ALBERTA, T6R 2K6. No: 2012568669. 101026957 SASKATCHEWAN LTD. Other 1256869 ALBERTA LTD. Numbered Alberta Prov/Territory Corps Registered 2006 AUG 15 Corporation Incorporated 2006 AUG 03 Registered Registered Address: SUITE 300, 255 - 17 AVE SW, Address: BOX #8, 125 8170 50 ST NW, EDMONTON CALGARY ALBERTA, T2S 2T8. No: 2112616210. ALBERTA, T6B 1E6. No: 2012568693. 101075855 SASKATCHEWAN LTD. Other 1257443 ALBERTA LTD. Numbered Alberta Prov/Territory Corps Registered 2006 AUG 15 Corporation Incorporated 2006 AUG 15 Registered Registered Address: 5105 - 49 STREET, Address: 1314 RIVERDALE AVENUE SW, LLOYDMINSTER ALBERTA, T9V 0K3. No: CALGARY ALBERTA, T2S 0Y8. No: 2012574436. 2112617788. 1258360 ALBERTA LTD. Numbered Alberta 101086914 SASKATCHEWAN LTD. Other Corporation Incorporated 2006 AUG 01 Registered Prov/Territory Corps Registered 2006 AUG 10 Address: 303-9811 34 AVE, EDMONTON ALBERTA, Registered Address: 176 STRATTEN WAY SE, T6E 5X9. No: 2012583601. MEDICINE HAT ALBERTA, T1B 3R3. No: 2112605619. 1258478 ALBERTA LTD. Numbered Alberta Corporation Incorporated 2006 AUG 01 Registered 10K CONSULTING LTD. Named Alberta Corporation Address: 282 TUSCANY VALLEY VIEW NW, Incorporated 2006 AUG 04 Registered Address: 2529-7 CALGARY ALBERTA, T3L 2K8. -
Comparison of 116 Open Spec, Hacker Friendly Single Board Computers -- June 2018
Comparison of 116 Open Spec, Hacker Friendly Single Board Computers -- June 2018 Click on the product names to get more product information. In most cases these links go to LinuxGizmos.com articles with detailed product descriptions plus market analysis. HDMI or DP- USB Product Price ($) Vendor Processor Cores 3D GPU MCU RAM Storage LAN Wireless out ports Expansion OSes 86Duino Zero / Zero Plus 39, 54 DMP Vortex86EX 1x x86 @ 300MHz no no2 128MB no3 Fast no4 no5 1 headers Linux Opt. 4GB eMMC; A20-OLinuXino-Lime2 53 or 65 Olimex Allwinner A20 2x A7 @ 1GHz Mali-400 no 1GB Fast no yes 3 other Linux, Android SATA A20-OLinuXino-Micro 65 or 77 Olimex Allwinner A20 2x A7 @ 1GHz Mali-400 no 1GB opt. 4GB NAND Fast no yes 3 other Linux, Android Debian Linux A33-OLinuXino 42 or 52 Olimex Allwinner A33 4x A7 @ 1.2GHz Mali-400 no 1GB opt. 4GB NAND no no no 1 dual 40-pin 3.4.39, Android 4.4 4GB (opt. 16GB A64-OLinuXino 47 to 88 Olimex Allwinner A64 4x A53 @ 1.2GHz Mali-400 MP2 no 1GB GbE WiFi, BT yes 1 40-pin custom Linux eMMC) Banana Pi BPI-M2 Berry 36 SinoVoip Allwinner V40 4x A7 Mali-400 MP2 no 1GB SATA GbE WiFi, BT yes 4 Pi 40 Linux, Android 8GB eMMC (opt. up Banana Pi BPI-M2 Magic 21 SinoVoip Allwinner A33 4x A7 Mali-400 MP2 no 512MB no Wifi, BT no 2 Pi 40 Linux, Android to 64GB) 8GB to 64GB eMMC; Banana Pi BPI-M2 Ultra 56 SinoVoip Allwinner R40 4x A7 Mali-400 MP2 no 2GB GbE WiFi, BT yes 4 Pi 40 Linux, Android SATA Banana Pi BPI-M2 Zero 21 SinoVoip Allwinner H2+ 4x A7 @ 1.2GHz Mali-400 MP2 no 512MB no no WiFi, BT yes 1 Pi 40 Linux, Android Banana -
Development Boards This Product Is Rohs Compliant
Development Boards This product is RoHS compliant. PANDABOARD DEVELOPMENT PLATFORM Features: • Core Logic: OMAP4460 applications Processor • Interface: (1) General Purpose Expansion Header • Wireless Connectivity: 802.11 b/g/n (WiLink™ 6.0) • Memory: 1GB DDR2 RAM (I2C, GPMC, USB, MMC, DSS, ETM) • Debug options: JTAG, UART/RS-232, 1 GPIO button NTL • Full Size SD/MMC card port • Camera Expansion Header • Graphics APIs: OpenGL ES v2.0, OpenGL ES v1.1, • 10/100 Ethernet • Display Connectors: HDMI v1.3, DVI-D. LCD Expansion OpenVGv1.1, and EGL v1.3 • USB: (1) USB 2.0 OTG port, (2) USB 2.0 High-speed port • Audio Connectors: 3.5" In/Out, HDMI audio out For quantities greater than listed, call for quote. MOUSER Pandaboard Price Description STOCK NO. Part No. Each 595-PANDABOARD UEVM4430G-01-00-00 Pandaboard ARM Cortex-A9 MPCore 1GHz OMAP4430 SoC Platform 179.00 595-PANDABOARD-ES UEVM4460G-02-01-00 Pandaboard ARM Cortex-A9 MPCore 1GHz OMAP4460 SoC Platform 185.00 Embedded Modules Embedded BEAGLEBOARD SOC PLATFORMS BeagleBoard.org develops low-cost, fan-less single-board computers based on low-power Texas Instruments processors featuring the ARM Cortex-A8 core with all of the expandability of today's desktop machines, but without the bulk, expense, or noise. BeagleBoard.org provides an open source development platform for A B the creation of high-performance embedded designs. Beagleboard C4 Features: Beagleboard xM Features: Beaglebone Features: • Over 1,200 Dhrystone MIPS using the superscalar • Over 2,000 Dhrystone MIPS using the Super-scalar -
Improving the Beaglebone Board with Embedded Ubuntu, Enhanced GPMC Driver and Python for Communication and Graphical Prototypes
Final Master Thesis Improving the BeagleBone board with embedded Ubuntu, enhanced GPMC driver and Python for communication and graphical prototypes By RUBÉN GONZÁLEZ MUÑOZ Directed by MANUEL M. DOMINGUEZ PUMAR FINAL MASTER THESIS 30 ECTS, JULY 2015, ELECTRICAL AND ELECTRONICS ENGINEERING Abstract Abstract BeagleBone is a low price, small size Linux embedded microcomputer with a full set of I/O pins and processing power for real-time applications, also expandable with cape pluggable boards. The current work has been focused on improving the performance of this board. In this case, the BeagleBone comes with a pre-installed Angstrom OS and with a cape board using a particular software “overlay” and applications. Due to a lack of support, this pre-installed OS has been replaced by Ubuntu. As a consequence, the cape software and applications need to be adapted. Another necessity that emerges from the stated changes is to improve the communications through a GPMC interface. The depicted driver has been built for the new system as well as synchronous variants, also developed and tested. Finally, a set of applications in Python using the cape functionalities has been developed. Some extra graphical features have been included as example. Contents Contents Abstract ..................................................................................................................................................................................... 5 List of figures ......................................................................................................................................................................... -
Suzanne's Microcluster Slides
csinparallel.org Microclusters for teaching PDC Suzanne J. Matthews (West Point) 1 csinparallel.org What is a Microcluster? • A personal, highly portable Beowulf cluster • Enables highly interactive and tactile experiential learning • Notable early examples: – Ultimate Linux Lunch Box (Ron Minnich and Mitch Williams, Sandia National Labs) – LittleFe (Charlie Peck, Earlham College) – Microwulf (Joel Adams, Calvin College) 2 csinparallel.org Single Board Computers (SBCs) 3 csinparallel.org Student Pi (West Point) Suzanne J. Matthews Raspberry Pi nodes - Prototype: Raspberry Pi B nodes - Initial: Raspberry Pi B+ nodes - Current: Raspberry Pi 2 nodes - 900 Mhz quad-core CPU, 1 GB of RAM, HDMI, USB, 10/100 Ethernet - Raspbian Linux June 2014 - ~$40 p/node - Materials: - http://suzannejmatthews.com/private/cluster.html October 2014 May 2016 4 csinparallel.org Student Parallella (West Point) Suzanne J. Matthews Parallella nodes - dual-core ARM A9 CPU, 16-core Epiphany co-processor, 1 GB of RAM, μHDMI, μUSB, Gigabit Ethernet - Linaro Linux - ~$145 p/node - Materials: - http://suzannejmatthews.com/private/cluster.html - http://suzannejmatthews.github.io/ October 2014 April 2016 January 2015 5 csinparallel.org Half ShoeBox Clusters (Centre College) David Toth Cubieboard/ODROID nodes (2-node clusters) - Prototype: Cubieboard2: dual-core ARM Cortex A7, 1 GB of RAM, HDMI, USB, 10/100 Ethernet - Latest: ODROID C2: 2Ghz quad-core A53, 2 GB of RAM, HDMI, USB, Gigabit Ethernet, - Android/Ubuntu Linux - ~ $150-$200 p/cluster - Materials: Early 2014 - http://web.centre.edu/david.toth/portablecluster/index.html -
Jumpstarting the Onion Omega2
Jumpstarting the Onion Omega2 An Introduction to a New Low-Cost Internet of Things Computer WOLFRAM DONAT JUMPSTARTING the Onion Omega2 AN INTRODUCTION TO A NEW LOW-COST INTERNET OF THINGS COMPUTER Wolfram Donat Maker Media, Inc. San Francisco Copyright © 2018 Wolfram Donat. All rights reserved. Published by Maker Media, Inc. 1700 Montgomery Street, Suite 240 San Francisco, CA 94111 Maker Media books may be purchased for educational, business, or sales promotional use. Online editions are also available for most titles (safari- booksonline.com). For more information, contact our corporate/institutional sales department: 800-998-9938 or [email protected]. Editorial Director: Roger Stewart Editor: Patrick DiJusto Copy Editor: Elizabeth Welch, Happenstance Type-O-Rama Proofreader: Scout Festa, Happenstance Type-O-Rama Cover and Interior Designer: Maureen Forys, Happenstance Type-O-Rama All the circuit and component diagrams in this book are created using Fritz- ing (http://fritzing.org/home). June 2018: First Edition Revision History for the First Edition 2018-06-18 First Release See oreilly.com/catalog/errata.csp?isbn=9781680455229 for release details. Make:, Maker Shed, and Maker Faire are registered trademarks of Maker Media, Inc. The Maker Media logo is a trademark of Maker Media, Inc. Jumpstarting the Onion Omega2 and related trade dress are trademarks of Maker Media, Inc. Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and Maker Media, Inc. was aware of a trademark claim, the designations have been printed in caps or initial caps. While the publisher and the author have used good faith efforts to ensure that the information and instructions contained in this work are accurate, the publisher and the author disclaim all responsibility for errors or omis- sions, including without limitation responsibility for damages resulting from the use of or reliance on this work. -
Openbricks Embedded Linux Framework - User Manual I
OpenBricks Embedded Linux Framework - User Manual i OpenBricks Embedded Linux Framework - User Manual OpenBricks Embedded Linux Framework - User Manual ii Contents 1 OpenBricks Introduction 1 1.1 What is it ?......................................................1 1.2 Who is it for ?.....................................................1 1.3 Which hardware is supported ?............................................1 1.4 What does the software offer ?............................................1 1.5 Who’s using it ?....................................................1 2 List of supported features 2 2.1 Key Features.....................................................2 2.2 Applicative Toolkits..................................................2 2.3 Graphic Extensions..................................................2 2.4 Video Extensions...................................................3 2.5 Audio Extensions...................................................3 2.6 Media Players.....................................................3 2.7 Key Audio/Video Profiles...............................................3 2.8 Networking Features.................................................3 2.9 Supported Filesystems................................................4 2.10 Toolchain Features..................................................4 3 OpenBricks Supported Platforms 5 3.1 Supported Hardware Architectures..........................................5 3.2 Available Platforms..................................................5 3.3 Certified Platforms..................................................7 -
Hacking Roomba®
Hacking Roomba® Tod E. Kurt Wiley Publishing, Inc. Hacking Roomba® Published by Wiley Publishing, Inc. 10475 Crosspoint Boulevard Indianapolis, IN 46256 www.wiley.com Copyright © 2007 by Wiley Publishing, Inc., Indianapolis, Indiana Published simultaneously in Canada ISBN-13: 978-0-470-07271-4 ISBN-10: 0-470-07271-7 Manufactured in the United States of America 10 9 8 7 6 5 4 3 2 1 No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8600. Requests to the Publisher for permission should be addressed to the Legal Department, Wiley Publishing, Inc., 10475 Crosspoint Blvd., Indianapolis, IN 46256, (317) 572-3447, fax (317) 572-4355, or online at http://www.wiley.com/go/permissions. Limit of Liability/Disclaimer of Warranty: The publisher and the author make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation warranties of fitness for a particular purpose. No warranty may be created or extended by sales or promotional materials. The advice and strategies contained herein may not be suitable for every situation. This work is sold with the understanding that the publisher is not engaged in rendering legal, accounting, or other professional services. -
Building a Datacenter with ARM Devices
Building a Datacenter with ARM Devices Taylor Chien1 1SUNY Polytechnic Institute ABSTRACT METHODS THE CASE CURRENT RESULTS The ARM CPU is becoming more prevalent as devices are shrinking and Physical Custom Enclosure Operating Systems become embedded in everything from medical devices to toasters. Build a fully operational environment out of commodity ARM devices using Designed in QCAD and laser cut on hardboard by Ponoko Multiple issues exist with both Armbian and Raspbian, including four However, Linux for ARM is still in the very early stages of release, with SBCs, Development Boards, or other ARM-based systems Design was originally only for the Raspberry Pis, Orange Pi Ones, Udoo critical issues that would prevent them from being used in a datacenter many different issues, challenges, and shortcomings. Have dedicated hard drives and power system for mass storage, including Quads, PINE64, and Cubieboard 3 multiple drives for GlusterFS operation, and an Archive disk for backups and Issue OS In order to test what level of service commodity ARM devices have, I Each device sits on a tray which can be slid in and out at will rarely-used storage Kernel and uboot are not linked together after a Armbian decided to build a small data center with these devices. This included Cable management and cooling are on the back for easy access Build a case for all of these devices that will protect them from short circuits version update building services usually found in large businesses, such as LDAP, DNS, Designed to be solid and not collapse under its own weight and dust Operating system always performs DHCP request Raspbian Mail, and certain web applications such as Roundcube webmail, Have devices hooked up to a UPS for power safety Design Flaws Allwinner CPUs crash randomly when under high Armbian ownCloud storage, and Drupal content management.