Select the playback file type when a disc contains 1 Media type You can change the dynamic range while playing different types of files. 2 Playback status Dolby Audio encoded discs. • Audio: Plays back audio files. 3 Current playback item information • Wide: Reproduces powerful sound at a low • Still image: Plays back still picture files. (title no./chapter no./folder no./file no./track no.) volume level with its full dynamic range. • Video: Plays back video files. 4 Playing time • Normal: Reduces the dynamic range a little. • Audio&Video (Initial): Plays back audio files and 5 IN indicator (lights up while a disc is inserted) • Dialog (Initial): Reproduces movie dialog more video files. 6 Playback mode indicator (Repeat/Random) clearly. 7 File type indicator *1 For list of language codes, see page 59. *2 For playable file types, see page 57. If the disc contains no files of the selected type, the existing files are played in the following priority: audio, video, then still picture. You can change these settings only while playback is stopped.ENGLISH 11
00_DDX_2019ST_KN_RN.indb 11 31/5/2018 2:44:22 PM Video
Video menu control operations Touching the operation keys performs the following [Picture Displays the picture adjustment screen. You can display the video menu control during video actions: Adjust] 1 Touch [DIM ON] or [DIM OFF] to playback. 1 turn on or off the dimmer. • Available operation keys differ depend on the [ZOOM]*1 Displays the picture size selection 2 Touch [+]/[–] to adjust the other selected disc type and file type. screen. items. 1 Touch [ Zoom] to change the • : Adjusts the brightness Video playback except VCD magnification level of the picture (−15 to +15). • : Adjusts the contrast Menu Control (Zoom1, Zoom2, Zoom3, Full: Initial). (−10 to +10). 2 Touch [J] [K] [H] [I] to move the • : Adjusts the blackness zooming frame. (−10 to +10). • : Adjusts the color [Aspect] Displays the aspect ratio selection (−10 to +10). screen. • : Adjusts the tint (−10 to +10). Touch [ Aspect] to select the aspect • : Adjusts the sharpness ratio. E.g. Video menu control screen for DDX396 (−2 to +2). *2: For 16:9 original pictures 4:3 signal 16:9 signal [Audio] Selects the audio type. [Subtitle] Selects the subtitle type. [Angle] Selects the view angle. : For viewing 4:3 pictures *1 When [Aspect] is set to or , the picture is naturally on the wide screen zoomed with the aspect ratio of the setting. 4:3 signal 16:9 signal This feature may not be used for some video sources. *2 Only for DDX419BT: While DivX is played back with set to [16:9] (Page 11 for discs/Page 14 for USB), *2: For 4:3 original pictures the aspect ratio may not be set correctly. 4:3 signal 16:9 signal
: For “DISC” source and “USB” source only: The aspect ratio is automatically selected to match the incoming signals.
12 ENGLISH
00_DDX_2019ST_KN_RN.indb 12 31/5/2018 2:44:22 PM Video USB
2 Touching the operation keys performs the following You can connect a USB mass storage class device such actions: as a USB memory, digital audio player, etc. to the unit. [ MENU] Displays the disc menu (DVD). 1 • For playable file types and other information, see [T MENU] Displays the disc menu (DVD). pages 57 and 60. [ZOOM] [Highlight] Switches to the direct disc menu mode. • You cannot connect a PC or portable HDD to the Touch the target item to select. [Aspect] Refer to “Video playback except VCD” on USB input terminal. page 12. [CUR] Displays the menu/scene selection [Picture • You cannot connect a USB device via a USB hub. screen. Adjust] J K H I • [ ] [ ] [ ] [ ]: Selects an item. 2 Connecting a USB device • [Enter]: Confirms the selection. USB device* (commercially available) • [Return]: Returns to the previous [ MENU] Displays the disc menu. screen. [Audio] Selects the audio channel (ST: stereo, L: left, R: right). Video playback for VCD [Direct]* Displays or hides the direct selection buttons. Menu Control Rear panel 1 Touch [DIR/CLR] to select a track directly on a VCD. 2 Touch the numbers ([0], [1] to [9]) to select the desired track. 3 Touch [Enter] to confirm.
To delete the last entry, touch [DIR/ E.g. Video menu control screen for DDX396 CLR]. [Return] Displays the previous screen or menu. * You need to stop playback to deactivate the PBC function when The source changes to “USB” and playback starts. playing a VCD with PBC activated. • All tracks in the USB device will be played repeatedly until you change the source or disconnect the USB device.
* Use CA-U1EX for extending the cable if necessary. (Max 500 mA, 5V)
ENGLISH 13
00_DDX_2019ST_KN_RN.indb 13 31/5/2018 2:44:22 PM USB
Playback operations Selecting a folder/track on the list 2 Enter the alphabet to search. Touch the first letter you want to search for, then Playback information and key operation 1 Display the folder/track list. touch [OK]. • For playback information, see “Source control screen” On the source control screen, touch as follows: on page 8. Settings for USB playback • For key operations on the touch panel, see “Common operation keys on source control screen” on 1 Display the screen. page 8. 2 Select the folder (1), then the item (2) in On the source control screen, touch as follows: the selected folder. Selecting the file type to play USB
You can specify the file type to play. Folder Name 1 File Name 1 Folder Name 2 File Name 2 USB Folder Name 3 File Name 3 2 Make the settings. Folder Name 4 File Name 4 Folder Name 5 File Name 5 USB Mode Screen Ratio 16:9 Drive Select Next File type Audio E.g. USB list screen for DDX396 Select an item in each layer until you reach and select the desired file. E.g. USB source control screen for DDX396
Select the file type as follows: Selecting a folder/track using alphabet search [Audio] Plays back audio files. Select the monitor type to watch a wide screen (Applicable only for audio file type) picture on the external monitor. [Video] Plays back video files. You can search for a folder or an audio file by entering 16:9 (Initial) 4:3 LB 4:3 PS [Photo] Plays back still picture files. the first letter you want to search for. If the USB contains no files of the selected type, the existing files are played in the following priority: audio, 1 Select the list (folder or track) to search. On the USB list screen, touch as follows: video, then still picture. You can change these settings only while playback is stopped. • Next: Switch between internal memory and the memory source of the connected device (such as a mobile phone). • [ ]: Folder list • [ ]: Track list 14 ENGLISH
03_DDX_2019ST_KNRN_Body01.indd 14 31/5/2018 4:48:41 PM Android iPod/iPhone
Connecting an Android device Playback operations Connecting an iPod/iPhone This unit supports Android OS 4.1 and above. Playback information and key operation • For playable iPod/iPhone types and other information, see page 60. Android (commercially available) Android • You cannot watch video. HANDMODE
Wired connection iPod/iPhone iPod/iPhone 30-pin STIW Lightning model connector model (commercially available) (commercially available) USB cable (commercially available) E.g. Android source control screen for DDX396
Touching the operation keys performs the following actions: [S]/[T] Selects an audio file. USB Audio cable USB Audio cable [IW] Starts/pauses playback. Rear panel for iPod/iPhone: for iPod/iPhone: KCA-iP103 (optional KCA-iP102 (optional accessory) accessory)
Rear panel
When connecting an Android device, “HAND MODE” is shown. You can control Android device using a media player application installed in the Android device.
The source changes to “iPod” and playback starts.
ENGLISH 15
00_DDX_2019ST_KN_RN.indb 15 31/5/2018 2:44:22 PM iPod/iPhone Radio
Bluetooth connection 2 Select a category (1), then select a Listening to the radio Pair the iPod/iPhone with this unit via Bluetooth. desired item (2). (Page 33) iPod The unit switches to FM alarm scene automatically
Artist 000000001 when receiving an alarm signal from FM broadcast. Selecting the playback device via the Playlists Artist Artist 000000002 Playback information on the source control connection method Album Artist 000000003 screen See on page 46 for more Songs Artist 000000004 information. Podcasts Artist 000000005 Radio Playback operations Select an item in each layer until you reach and select the desired file. Playback information and key operation • Available categories differ depending on the type • For playback information, see “Source control screen” of iPod/iPhone. on page 8. • For key operations on the touch panel, see “Common Settings for iPod/iPhone playback operation keys on source control screen” on page 8. 1 Display the screen. 1 Selects the band (AM/FM1/FM2/FM3) On the source control screen, touch as follows: Additional keys operations. Touching the operation 2 Current station frequency/RBDS status keys performs the following actions: 3 Text information • Touching [<] scrolls the text if not all of the text [ ] Switches the device on screen. (Page 46) • Touching [Radio Text] switches the information 2 Make the settings. between Radio Text, Radio Text Plus and PTY iPod Mode code. Selecting an audio file from the menu Artwork ON OFF 4 Displays the preset stations window (Page 18) 1 Display the audio menu. 5 [P1] – [P5] On the source control screen, touch as follows: • (Touch) Selects a preset station. • (Hold) Presets the current station. • ON (Initial): Shows the artworks of the playing files. • OFF: Hides the artworks of the playing files.
16 ENGLISH
00_DDX_2019ST_KN_RN.indb 16 31/5/2018 2:44:22 PM Radio
6 Displays/hides other available operation keys* • If the TI indicator lights up in orange, Presetting stations in the memory 7 TI indicator tune into another station providing 8 ST/MONO indicator Radio Broadcast Data System signals. You can preset five stations for each band. The ST indicator lights up when receiving an FM • The volume adjustment for Traffic stereo broadcast with sufficient signal strength. Information is automatically Automatic presetting — AME (Auto 9 Seek mode indicator memorized. The next time the unit Memory) p Operation keys* switches to Traffic Information, the On the source control screen, touch as follows: volume is set to the memorized level. See the following “Operation keys on source control screen”. • To deactivate, touch [TI] again.
Operation keys on source control screen p (Hold) • The appearance of the operation keys may differ, [PTY]* (For FM RBDS features) The local stations with the strongest signals are found however the similar operation keys have the same Enters PTY search mode. and stored automatically. operations. 1 Touch [PTY]. • See also “Common operation keys on source control 2 Touch and hold a PTY code to search Manual presetting screen” on page 8. for. If there is a station broadcasting a 1 Tune in to a station you want to preset. Touching the operation keys performs the following program of the same PTY code as you actions: have selected, that station is tuned in. 6 [SEEK] Changes the seek mode for [S]/[T]. • AUTO1 (Initial): Auto search [AME ] (Hold) Presets stations automatically. • AUTO2: Tunes in preset stations one 2 Select a preset number to store into.
[MONO]* Activates monaural mode for better FM after another Radio
reception (stereo effect will be lost). • MANU: Manual search P1 • The MONO indicator lights up while [S]/[T] Searches for a station. monaural mode is activated. • The search method differs according • To deactivate, touch [MONO] again. to the selected seek mode (see above). [TI]* (For FM RBDS features) (Hold) Activates TI standby reception mode. * Appears only when FM is selected as the source. • When TI is activated, the unit is ready to switch to traffic information if E.g. Radio source control screen for DDX396 available. The TI indicator lights up in white. The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected.
ENGLISH 17
00_DDX_2019ST_KN_RN.indb 17 31/5/2018 2:44:23 PM Radio SiriusXM® Satellite Radio (Only for DDX396/DDX376BT/DDX276BT/DDX26BT)
Selecting a preset station Only SiriusXM® brings you more of what you love Activating subscription to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, 1 Select the band, then display the preset 1 Check your Radio ID. news, talk, comedy and entertainment. Welcome to station window. The SiriusXM Satellite Radio ID is required the world of satellite radio. A SiriusXM Connect Vehicle for activation and can be found by tuning to On the source control screen, touch as follows: Tuner and subscription are required. Channel 0 as well as on the label found on the For more information, visit . SiriusXM Connect Vehicle Tuner and its packaging. • The Radio ID does not include the letters I, O, S or Preparation F. 2 Select a preset station. Connecting the SiriusXM Connect Vehicle 2 Activate the subscription. For users in the U.S.A: Radio Tuner • Online: Visit P1 Perform this installation when you install the unit for • Phone: Call SiriusXM Listener Care at the first time. 1-866-635-2349 Antenna For users in Canada: • Online: Visit SiriusXM Connect Vehicle • Phone: Call XM Customer Care at 1-877-438-9677 Tuner (commercially 3 Confirm the activation. E.g. Preset station window for DDX396 available) A confirmation message appears. Touch [Return]. Rear panel To hide the window: Touch [ ]. Listening to the SiriusXM® Satellite Radio Playback information on the source control screen
SiriusXM
18 ENGLISH
00_DDX_2019ST_KN_RN.indb 18 31/5/2018 2:44:23 PM SiriusXM® Satellite Radio
1 Displays/hides other available operation keys* Operation keys on source control screen q 2 Selects the band (SXM1/SXM2/SXM3/SXM4) • See also “Common operation keys on source control [ ] Displays the screen. 3 Channel number screen” on page 8. 4 Text information [IW] Starts/pauses the content replay. • Touching [ ] scrolls the text if not all of the text Touching the operation keys performs the following [CHJ]/[CHK] Selects the channel. is shown. actions: • To select a channel, make sure • Touching [Song Title]/[Info]/[Category] 1 “SEEK1” is selected as the seek switches the information. mode. 5 Displays the preset channel window [MODE] Displays the screen. • To select a preset channel, make • To hide the window, touch [ ]. sure “SEEK2” is selected as the seek (Hold) Registers the current artist to 6 [P1] – [P5] [ ] mode. • (Touch) Selects a preset channel. the alert contents. • (Hold) Presets the current channel. [ ] (Hold) Registers the current song to 7 Playback status and time code for the buffered data the alert contents. Selecting a channel on the list and replay mode [ ] Activates or deactivates the content You can obtain information on channels or select a • The time code shows you the point in the Replay alert for traffic and weather. channel to listen to. buffer you are listening to. (E.g. “–5:00” means [SEEK] Changes the seek mode for [CHJ]/ that you are listening to audio that is 5 minutes 1 Display the screen. [CHK]. behind the current broadcast.) On the source control screen, touch as follows: • SEEK1 (Initial): Skips to another 8 Replay time bar for replay mode available channel. • Black: The remaining capacity • SEEK2: Skips to another preset • Blue: The amount of buffered contents channel. 9 Signal strength indicator 2 Select a category (1), and then select a [SCAN] Starts TuneScan™. p Seek mode indicator channel (2). q Operation keys* [S]/[T]/ Performs playback operations during Channel List Channel [Live] content replay. * See the following “Operation keys on source control screen”. All Channels 100Ch Channel Name [ ] Changes the page in the window to Category Name 1 105Ch Channel Name display other operation keys. Category Name 2 110Ch Channel Name Category Name 3 115Ch Channel Name Category Name 4 120Ch Channel Name
ENGLISH 19
00_DDX_2019ST_KN_RN.indb 19 31/5/2018 2:44:23 PM SiriusXM® Satellite Radio
• To list all the channels, touch [All Channels]. Selecting a preset channel Replaying content • Touch the info change key above the list ([Channel]/[Artist]/[Song Title]/[Info]) to You can pause, rewind and replay the contents from 1 Select the band, then display the preset display other information in the following order: the currently tuned channel. Channel, Artist, Song Title, Content Info. channel window. • The SiriusXM Connect Vehicle Tuner continually On the source control screen, touch as follows: buffers up to 60 minutes of audio. Presetting channels in the memory • If you change to another channel during playback, the buffered contents will be lost. You can preset five channels for each band. • The time code is updated every second. 1 Tune in to a channel you want to preset. 2 Select a preset channel. 1 Display the operation keys for replay. On the source control screen, touch as follows: SiriusXM
P1 Channel Name 100Ch Channel Name 105Ch 2 Select a preset number to store into. Channel Name 110Ch Channel Name SiriusXM 115Ch 2 Perform the replay operations. P1 Channel Name 100Ch 120Ch SiriusXM
105Ch • You can also select a preset channel by touching 110Ch [P1]–[P5]. 115Ch (Hold) 120Ch To hide the window: Touch [ ]. The channel selected in step 1 is stored into the 3 Select “SEEK2” as the seek mode to jump preset number [P1] to [P5] you have selected. to the selected preset channel.
20 ENGLISH
00_DDX_2019ST_KN_RN.indb 20 31/5/2018 2:44:23 PM SiriusXM® Satellite Radio
[IW] Starts/pauses playback. TuneStart™ Content Alert S T [ ]/[ ] Skips the current track/segment. When you select a SmartFavorites channel, you can The unit informs you when receiving the content you S • Touching [ ] within 2 seconds listen to the current song from the beginning. are interested in, such as music, information about a of the beginning of the current 1 Display the screen. sports team, weather and traffic information. track/segment returns to the On the source control screen, touch as follows: previous track. Registering items for Contents Alert • Touching [S] after 2 seconds or more of the current track returns You can register your favorite artists, songs or teams. to the beginning of the track. Up to 50 contents can be registered. (Hold) Reverses/forwards search. 2 Activate TuneStart™. For artists/songs [Live] Returns to the live position. On screen, touch as follows: While listening to your favorite artist/song: : [ON] On the source control screen, touch as follows: SiriusXM Satellite Radio features To deactivate TuneStart: Touch [OFF] in step 2. SmartFavorites TuneScan™ (Hold) User stored channels (P1 to P5) of the current band You can get a short preview of the songs you have are recognized as SmartFavorites channels. SiriusXM missed on each of your SmartFavorites music channels Touching the operation keys performs the following Connect Vehicle Tuner automatically buffers their and the currently tuned music channel. actions: broadcast content in the background. When you select Activate TuneScan™ to start scanning the first a SmartFavorite channel, you can rewind and replay up 6 seconds of the recorded music contents. [ ] (Hold) Registers the artist of the current to 30 minutes of any of the missed news, talk, sports or song. music content. On the source control screen, touch as follows: [ ] (Hold) Registers the current song. • SmartFavorites is available only when you connect an SXV200 or later SiriusXM Connect Vehicle Tuner. • If you change to another band, the buffered content is cleared and new channels in the current band will start buffering. The unit starts scanning. • To select the previous/next content, touch [S] or [T]. • To end scanning and continue listening to the current song/content, touch [SCAN] again. • To exit scanning, touch and hold [SCAN].
ENGLISH 21
00_DDX_2019ST_KN_RN.indb 21 31/5/2018 2:44:24 PM SiriusXM® Satellite Radio
For teams Selecting items for Content Alert To delete the registered items: Touch and hold the item you want to delete in step 2. 1 Display the screen. You can select items (artists/songs/teams) from the The [ ] icon and a check mark appear beside the On the source control screen, touch as follows: registered items on the list to inform you once the unit selected item. Touch the [ ] icon to delete. receives the information. To delete all registered contents: Touch and hold For artists/songs/teams [All Clear ] for in Then, on the screen, touch as 1 Display the step 1. follows: screen. : [Enter] On the source control screen, touch as follows: For traffic and weather information 2 Select the league (1) and the team (2), 1 Display the screen. then register into the content alert (3). On the source control screen, touch as follows:
Alert Team Select
League1 Team1 Then, on the screen, touch as League2 Team2 follows: League3 Team3 : [Set] League4 Team4 2 Select the city you desire traffic and League5 Team5 2 Select the category (1), then the item (2). weather information for.
Content Alerts Contents Set SiriusXM Mode Content Alerts ON OFF Artist 000Ch Ch Name Content Alerts Contents Set Set All Clear Title 000Ch Ch Name Alert Team Select Enter Team 000Ch Ch Name Traffic Weather Jump City Select 000Ch Ch Name Los Angeles 000Ch Ch Name SiriusXM Reset Reset
A check mark appears beside the selected item. • When traffic and weather broadcast is received, the • To show the details of the item, touch [<]. unit automatically switches the channel.
22 ENGLISH
00_DDX_2019ST_KN_RN.indb 22 31/5/2018 2:44:24 PM SiriusXM® Satellite Radio
Activating Content Alert Switching to registered content Setting reception restrictions For artists/songs/teams When an artist/song/team registered for Content Alert You can limit access to SiriusXM channels, such as is being broadcasted, an alert appears on the screen. 1 Display the screen. those with mature content. On the source control screen, touch as follows: Touch [Jump], then select the item to jump to on the screen. Setting or changing the parental code • The initial setting is “0000”. Content Alerts • Changing the code does not change the Artist 1/ Channel Name / settings. On screen, touch as follows: Song 2/ Channel Name Team 1/ Channel Name 1 Display the : [ON] Team 2/ Channel Name screen. On the source control screen, touch as follows: To deactivate Content Alert: Touch [OFF] in step 2. • To show the details of the item, touch [<]. For traffic and weather information Make sure is set to [ON], then on the source control screen, touch as follows: Then, on the screen, touch as follows: : [Change] 2 Enter the initial four-digit code (0000) (1), • When a traffic and weather broadcast for the and then touch [Enter] (2) to confirm.
selected city is received, the unit automatically Parental Code Check switches the channel. **** Clear 123 To deactivate the Content Alert: Touch [ ] again. 456 789 Cancel 0 Enter
• To clear the last entry, touch [Clear]. • To cancel setting the code, touch [Cancel].
ENGLISH 23
00_DDX_2019ST_KN_RN.indb 23 31/5/2018 2:44:24 PM SiriusXM® Satellite Radio
3 Enter a new four-digit code, then touch Parental Lock channel selection To deactivate parental lock for all locked channels: [Enter] to confirm. Select [All Clear] for in step 1, then enter the parental code. 4 Repeat step 3 above to confirm the new to be locked by the parental control feature. code. • You can only change the setting if Skipping unwanted channels is set to [User]. If you do not want to receive some channels, you can Activating parental control 1 Display the screen. You can set the parental control feature to lock any 1 Display the SiriusXM channels or automatically lock all channels On the source control screen, touch as follows: screen. classified as “mature” by SiriusXM®. On the source control screen, touch as follows: 1 Display the screen. On the source control screen, touch as follows: Then, on the screen, touch as follows: [SET] Then, on the screen, touch as follows: 2 Enter the parental code. : [SET] 2 Select the desired mode for screen Control>. appears. 2 Select a category (1), then a channel (2). A check mark appears beside the selected channel. [OFF] Deactivates parental control. 3 Select a category (1), then a channel (2). Skip Channel Selection [Mature] Locks channels classified as “mature” A check mark appears beside the selected channel. All Channels 100Ch Channel Name Parental Lock Channel Selection by SiriusXM®. Category Name 1 105Ch Channel Name [User] Locks selected channels. All Channels 100Ch Channel Name Category Name 2 110Ch Channel Name Category Name 1 105Ch Channel Name Category Name 3 115Ch Channel Name
Category Name 2 110Ch Channel Name Category Name 4 120Ch Channel Name 3 Enter the parental code to confirm your Category Name 3 115Ch Channel Name selection. Category Name 4 120Ch Channel Name • To list all the channels, select [All Channels].
• To list all the channels, select [All Channels]. 3 Repeat step 2 to skip multiple channels.
4 Repeat step 3 to set the parental lock on To clear the channel skipping for all skipped multiple channels. channels: Touch and hold [All Clear ] for in step 1.
24 ENGLISH
00_DDX_2019ST_KN_RN.indb 24 31/5/2018 2:44:24 PM SiriusXM® Satellite Radio Pandora® (Only for DDX396/DDX376BT/DDX276BT/DDX26BT)
Resetting the SiriusXM Satellite Radio You can stream Pandora from iPhone/iPod touch or Install the latest version of the Pandora application on Android devices. your smartphone. settings • Pandora is only available in certain countries. For • For Android devices: Search for “Pandora” in Google You can reset all the SiriusXM settings you made and more information, visit . Play to find and install the most recent version. restore the initial settings. • Because Pandora is a third-party service, the • For iPhone/iPod touch: Search for “Pandora” in the specifications are subject to change without Apple iTunes App Store to find and install the most 1 Display the screen. prior notice. Accordingly, compatibility may be recent version. On the source control screen, touch as follows: impaired or some or all of the services may become unavailable. Connecting the device • Some functions of Pandora cannot be operated from For Android devices this unit. Pair the Android device with this unit via Bluetooth. • For issues using the application, contact Pandora at (Page 33) 2 Reset the setting. . On the screen, touch and hold For iPhone/iPod touch as follows: Preparation • Via USB input terminal: Connect iPhone/iPod touch : [Reset ] with the cable. (Page 15) Installing the application – For Lightning models: Use KCA-iP103 (optional Your smartphone must has built in Bluetooth and the accessory). following profiles must be supported: – For 30-pin connector models: Use KCA-iP102 • SPP (Serial Port Profile) (optional accessory). • A2DP (Advanced Audio Distribution Profile) • Via Bluetooth: Pair the iPhone/iPod touch with this Establish an Internet connection using LTE, 3G, EDGE, unit. (Page 33) or WiFi. Ensure you are logged in to your smartphone Selecting the device application. If you do not have a Pandora account, you For selecting the playback device via the connection can create one for free from your smartphone or at method to use, see on . page 46.
ENGLISH 25
00_DDX_2019ST_KN_RN.indb 25 31/5/2018 2:44:25 PM Pandora®
Playback operations Operation keys on source control screen Selecting a station from the list • The appearance of the operation keys may differ, Playback information and key operation however the similar operation keys have the same 1 Display the list selection screen. operations. On the source control screen, touch as follows: • See also “Common operation keys on source control Pandora screen” on page 8.
Touching the operation keys performs the following actions: 2 Select the list type.
1 Pandora [ ] Adds the current artist to the station list. [ ] Adds the current track to the station list. Station List Genre List You can also operate Pandora with optional remote [ ] Bookmarks the current track. controller, KNA-RCDV331. [ ] Switches the device on screen. (Page 46) remote controller. [Station List] Selects from the station names. 4 1 Displays/hides other available operation keys* [Genre List] Selects from the genres. [ ] Displays the list selection screen. 2 Picture data 3 Track information [ ] Thumbs down to the current track and • Touching [<] scrolls the text if not all of the text skips to the next track. is shown. [ ] Registers the current track as a favorite. 4 Operation keys* IW 5 Playing time/playback status [ ] Starts/pauses playback. [T] Skips the current track. * See the following “Operation keys on source control screen”. • Not available when the Pandora skip reaches its limit.
26 ENGLISH
00_DDX_2019ST_KN_RN.indb 26 31/5/2018 2:44:25 PM Pandora® iHeartRadio (Only for DDX396/DDX376BT/DDX276BT/DDX26BT)
3 Select a station from the list. iHeartRadio is a free, all-in-one digital radio service that Install the latest version of the iHeartRadio application On the station list: lets you listen to your favorite live stations or create on your smartphone. commercial-free, all-music custom stations featuring • For Android devices: Search for “iHeartRadio for Auto” Pandora songs from the artists you select and similar music. in Google Play to find and install the most recent Shuffle By Date Station Name version. By Name Station Name You can stream iHeartRadio from iPhone/iPod touch or • For iPhone/iPod touch: Search for “iHeartRadio for Station Name Android devices. Auto” in the Apple iTunes App Store to find and Station Name • Because iHeartRadio is a third-party service, the install the most recent version. Station Name specifications are subject to change without prior notice. Accordingly, compatibility may be Connecting the device impaired or some or all of the services may become • To play all the songs in the registered stations For Android devices randomly, touch [Shuffle]. unavailable. Pair the Android device with this unit via Bluetooth. • To sort the list in reverse chronological order, • Some functions of iHeartRadio cannot be operated (Page 33) touch [By Date]. from this unit. • For issues using the application, contact iHeartRadio • To sort the list in alphabetical order, touch [By For iPhone/iPod touch Name]. at
Pandora Your smartphone must has built in Bluetooth and the (optional accessory). Genre Name 1 Song Name 1 following profiles must be supported: • Via Bluetooth: Pair the iPhone/iPod touch with this Genre Name 2 Song Name 2 • SPP (Serial Port Profile) unit. (Page 33) Genre Name 3 Song Name 3 • A2DP (Advanced Audio Distribution Profile) Genre Name 4 Song Name 4 Establish an Internet connection using LTE, 3G, EDGE, Selecting the device Genre Name 5 Song Name 5 or WiFi. For selecting the playback device via the connection Ensure you are logged in to your smartphone method to use, see on application. If you do not have a iHeartRadio account, page 46. 1 Select a genre. you can create one for free from your smartphone or at 2 Select a station.
ENGLISH 27
00_DDX_2019ST_KN_RN.indb 27 31/5/2018 2:44:25 PM iHeartRadio
Playback operations Operation keys on source control screen *1 Appears only for the custom station screen. • The appearance of the operation keys may differ, *2 Appears only for the live station screen. Playback information and keys operation however the similar operation keys have the same operations. Selecting the variety level for your custom • See also “Common operation keys on source control station iHeartRadio screen” on page 8. 1 Display the variety level selection screen. Touching the operation keys performs the following On the source control screen, touch as follows: actions: 1 [ ] Creates a custom station from the currently playing track content information. 2 Select the variety type. You can also operate iHeartRadio with optional remote [ ] Saves the current station to the Discovery Tuner controller, KNA-RCDV331. list. Familiar Less Familiar You can only control play, pause and skip with the [ ]*1 Displays the variety level selection remote controller. screen. [ ] Switches the device on screen. (Page 46) 2 Picture data 3 Track information 4 [Familiar] Distributes well-known tracks. • Touching [<] scrolls the text if not all of the text [ ] Displays the screen is shown. or the station list. [Mixed] Distributes a mix of artists and 4 Operation keys* track names. 5 [ ] Dislikes the currently playing content. Playback status [Less Familiar] Distributes a wide variety of [ ] Likes the currently playing content. tracks including lesser-known * See the following “Operation keys on source control screen”. [Io]*2 Starts/stops playback. ones. [IW]*1 Starts/pauses playback. [SCAN]*2 Scans stations randomly. [T]*1 Skips the current track.
28 ENGLISH
00_DDX_2019ST_KN_RN.indb 28 31/5/2018 2:44:25 PM iHeartRadio Spotify
Searching for a station Editing the list With Spotify, your music is everywhere. Working out, partying or relaxing, the right music is always at your 1 Display the screen. 1 Display the screen. fingertips. There are millions of songs on Spotify—from On the source control screen, touch as follows: On the source control screen, touch as follows: old favorites to the latest hits. Just choose the music you love, or let Spotify surprise you.
You can stream Spotify from iPhone/iPod touch or Android devices. 2 Select a station. Then, on the screen, touch as • Because Spotify is a third-party service, the • The items displayed on the follows: specifications are subject to change without screen differ depending on the information sent prior notice. Accordingly, compatibility may be from iHeartRadio. impaired or some or all of the services may become
Station Search unavailable. Favorites • Some functions of Spotify cannot be operated from Recent Stations 2 Select stations (1), then delete the this unit. Live Radio 2 • For issues using the application, contact Spotify at Artist Radio selected stations ( ). . Podcasts • A check mark appears beside the selected station.
Station Edit Station 01 Preparation Station 02 • To return to the top layer, touch [ ]. Station 03 Installing the application • To return to the upper layer, touch [ ]. Station 04 Your smartphone must has built in Bluetooth and the Station 05 Station 06 following profiles must be supported: • SPP (Serial Port Profile) • A2DP (Advanced Audio Distribution Profile) • To return to the top layer, touch [ ]. Establish an Internet connection using LTE, 3G, EDGE, • To return to the upper layer, touch [ ]. or WiFi. Ensure you are logged in to your smartphone application. If you do not have an Spotify account, you can create one for free from your smartphone or at .
ENGLISH 29
00_DDX_2019ST_KN_RN.indb 29 31/5/2018 2:44:25 PM Spotify
Install the latest version of the Spotify application on Playback operations Operation keys on source control screen your smartphone. • The appearance of the operation keys may differ, • For Android devices: Search for “Spotify” in Google Playback information and key operation however the similar operation keys have the same Play to find and install the most recent version. operations. • For iPhone/iPod touch: Search for “Spotify” in the • See also “Common operation keys on source control Apple iTunes App Store to find and install the most Spotify screen” on page 8. recent version. Touching the operation keys performs the following Connecting the device actions: For Android devices 1 Pair the Android device with this unit via Bluetooth. [ ]*3 Thumbs down to the current track and (Page 33) skips to the next track.
For iPhone/iPod touch [ ]*3 Registers the current track as a favorite. You can also operate Spotify with a remote controller, • Via USB input terminal: Connect iPhone/iPod touch [ ]*4 *5 Activates/deactivates the shuffle RC-DV340*1. with the cable. (Page 15) playback mode. – For Lightning models: Use KCA-iP103 (optional You can only control play, pause and skip with the remote controller. [ ]*4 Repeats all tracks/cancels the repeat accessory). playback. – For 30-pin connector models: Use KCA-iP102 1 [ ]*4 *5 Repeats the current track/cancels the (optional accessory). Displays/hides other available operation keys*2 2 repeat playback. • Via Bluetooth: Pair the iPhone/iPod touch with this Picture data 3 unit. (Page 33) Track information [ ] Creates a new station. • Touching [<] scrolls the text if not all of the text is shown. [ ] Switches the device on screen. (Page 46) For selecting the playback device via the connection information between artist ( ) and album ( ). 4 method to use, see on 4 Operation keys*2 page 46. 5 Playing time/playback status [ ] Displays the Spotify menu screen. 6 Progress bar [ ]*5 [ ] Selects a track.
*1 For DDX396/DDX376BT/DDX276BT/DDX26BT: Purchase optional [ ][ ] Starts (I)/pauses (W) playback. remote controller, KNA-RCDV331. [ ] Saves the current track/artist to .
30 ENGLISH
03_DDX_2019ST_KNRN_Body01.indd 30 20/8/2018 4:21:33 PM Spotify Other External
*3 Not available for tracks in a playlist. Selecting a track Components *4 Not available for tracks in the Radio. *5 Available only for premium account users. 1 Display the Spotify menu screen. AV-IN On the source control screen, touch as follows: Creating your station (Start Radio) Connecting an external component Start Radio is to start a radio channel based on the See page 57 for more information. currently played track. 2 Select the list type, then select a desired Starting playback Create your station. item. On the source control screen, touch as follows: • The list types displayed differ depending on the 1 Select “AV-IN” as the source. information sent from Spotify. 2 Turn on the connected component and Spotify start playing the source. Your Library Browse Station is created and playback starts automatically. Radio Changing the AV-IN name • You can personalize your station using thumb up You can change the AV-IN name displayed on the ([ ]) or thumb down ([ ]). source control screen. – You cannot thumb up or down while playing tracks • This setting does not affect the source name in a playlist. displayed on the Home screen. – Personalizing stations may not be available • To return to the top layer, touch [ ]. 1 Display the screen. depending on the track. • To return to the upper layer, touch [ ]. On the source control screen, touch as follows:
2 Select an AV-IN name.
VIDEO Mode
AV-IN Name VIDEO
ENGLISH 31
03_DDX_2019ST_KNRN_Body01.indd 31 20/8/2018 4:21:44 PM Other External Components
Rear view camera Operations while the camera screen is Using an external component via ADS Install the rear view camera (separately purchased) in displayed adapter—OEM Features the appropriate position according to the instructions To adjust the picture (Only for DDX396/DDX376BT/DDX276BT) supplied with the rear view camera. Touch the area shown below. By connecting this unit to the bus system of the vehicle using iDataLink (commercially available), this Connecting a rear view camera unit can access the satellite radio source provided for See page 57 for more information. the vehicle and vehicle information can be displayed • To use the rear view camera, a reverse lead (REVERSE) on this unit. connection is required. (Page 56) Video menu control is shown. For details, see “Video • Displayable screens, button names, and screen menu control operations” on page 12. names vary depending on the type of the connected Using the rear view camera • To exit video menu control, touch the same area iDataLink and the model of the vehicle. • For details, visit on again. page 45. To display parking guide line Connecting an ADS adapter To display the rear view camera screen Set to [ON] (Page 45) or See page 57 for more information. The rear view screen is displayed by shifting the gear touch the area shown below. to the reverse (R) position when is set to [ON]. (Page 45) adapter • A caution message appears on the screen. To • For settings to use an ADS adapter, see page 46. remove the caution message, touch the screen. • To close the parking guidelines, touch the same area 1 Select “OEM Features” as the source. You can also display the picture from the rear view again. On the Home screen, touch as follows: camera manually without shifting the gear to the reverse (R) position. To exit the camera screen Press HOME on the monitor panel or touch the area On the pop-up short-cut menu, touch as follows: shown below. 2 Turn on the connected component and start playing the source.
32 ENGLISH
00_DDX_2019ST_KN_RN.indb 32 31/5/2018 2:44:26 PM Other External Components Bluetooth®
[Satellite Displays the control screen of the Information Connection Radio] satellite radio source provided for the vehicle. Bluetooth is a short-range wireless radio When you connect a Bluetooth device to the unit for communication technology for mobile devices such as the first time: [Media Displays the control screen of the mobile phones, portable PCs and other devices. 1 Register the device by pairing the unit and the Player] media player source provided for the Bluetooth devices can be connected without cables device. vehicle. and communicate with each other. 2 Connect the device to the unit. (Page 34) [TEL] Displays the control screen of the Bluetooth Hands Free function Note Registering a new Bluetooth device provided for the vehicle. • While driving, do not perform complicated Pairing allows Bluetooth devices to communicate with [BT Displays the control screen of the operations such as dialing numbers, using the phone each other. Streaming] Bluetooth streaming function book, etc. When you perform these operations, stop • The pairing method differs depending on the provided for the vehicle. your car in a safe place. Bluetooth version of the device. [Gauges] Displays the information about the • Some Bluetooth devices may not connect to this unit – For devices with Bluetooth 2.1: instruments such as a speedometer. depending on the Bluetooth version of the device. You can pair the device and the unit using SSP • This unit may not work for some Bluetooth devices. [Climate] Displays the information about the air (Secure Simple Pairing) which only requires • Connecting conditions may vary depending on your conditioner of the vehicle. confirmation. environment. [Parking Displays the information about – For devices with Bluetooth 2.0: • For some Bluetooth devices, the device is You need to enter a PIN code both on the device Assist] the Parking Distance Sensor of the disconnected when the unit is turned off. vehicle. and unit for pairing. • If your mobile phone supports PBAP (Phone Book • Once the connection is established, it is registered in [Vehicle Info] Displays the information about the Access Profile), you can display the following items the unit even if you reset the unit. Up to five devices tire pressures of the vehicle. on the touch panel when the mobile phone is can be registered in total. [Radar Displays the information about the connected. • Two devices for Bluetooth phone and one for Detector] Radar Detector. – Phone book Bluetooth audio can be connected at a time. – Dialed calls, received calls, and missed calls (up to However, when “BT Audio” is selected as the source, 10 entries in total) you can connect up to five Bluetooth audio devices and switch between these five devices. Preparation • To use the Bluetooth function, you need to turn on the Bluetooth function of the device. Connect and install the microphone beforehand. For details, see page 56.
ENGLISH 33
00_DDX_2019ST_KN_RN.indb 33 31/5/2018 2:44:27 PM Bluetooth®
Auto pairing Pairing a Bluetooth device using a PIN code 4 Select the unit (“DDX3eX”/“DDX3”/ When is set to [ON] (page 39), (for Bluetooth 2.0) “DDX2”/“DDX4”) on your Bluetooth iOS (such as iPhone) devices are automatically paired 1 Display the screen. device. when connected via USB. On the Home screen, touch as follows: • If a PIN code is required, enter “0000” (initial) or new PIN code you have entered in step 2. Pairing a Bluetooth device using SSP • When pairing is completed, the device is (for Bluetooth 2.1) registered on the screen. When the Bluetooth device is compatible with Bluetooth 2.1, a pairing request is sent from the Then, on the screen, touch as follows: Note available device. [System] : [Enter] • The PIN code is initially set to “0000”. 1 Search for the unit (“DDX3eX”/“DDX3”/ • The maximum number of digits in the PIN code is 15. On the screen, touch as “DDX2”/“DDX4”) from your Bluetooth follows: device. : [0000] Connecting/disconnecting a registered Bluetooth device 2 Confirm the request both on the device 2 Change the PIN code. and the unit. If you wish to skip changing the PIN code, go to 1 Display the screen. On the device: step 3. On the Home screen, touch as follows:
PIN Code Set
0000 123 456 Then, on the screen, touch as follows: 789 [System] : [Enter] 0 Enter Clear On the unit: On the screen, touch as follows: • To delete the last entry, touch [Clear]. : [Enter] • To delete the PIN code, touch and hold [Clear]. 3 Search for the unit (“DDX3eX”/“DDX3”/ “DDX2”/“DDX4”) from your Bluetooth device.
To reject the request: Touch [Cancel].
34 ENGLISH
00_DDX_2019ST_KN_RN.indb 34 31/5/2018 2:44:27 PM Bluetooth®
2 Select the device (1) you want to connect, • The status is shown as follows: During a call... then select [Connection] (2). : Connection is in progress. 1 2 : A connection has been established. Device Name 1 Device Name 2 Paired Device List : A connection can be established. Talking... Name 1234XXXXXX Device Name 1 : Disconnection is in progress. NR LEVEL – +0 Device Name 2 : No connection is established. Device Name 3 OK • When a Bluetooth mobile phone is connected, the EC LEVEL – +0 Device Name 4 Connection signal strength and battery level are displayed when DTMF MIC LEVEL – +0 Device Name 5 Remove the information is acquired from the device.
To delete the registered device: Perform step 1, Touching the operation keys performs the following 1 3 Select the device ( ) to connect, then select the device you want to delete in step 2, then actions: return to the (2). touch [Remove].
BT Connection Settings • A confirmation message appears. Touch [Yes]. [ ] Ends a call. Device Name [ ]/ Switches between handsfree mode and Connected ON OFF Bluetooth mobile phone [ ] phone mode. Connect Ready ON OFF When a call comes in... [DTMF] Enters DTMF (Dual Tone Multi Frequency), then sends text using the 1 2 Device Name 1 Device Name 2 keypad. Incoming Call NR LEVEL Adjusts the noise reduction level. Name [–] / [+] (–5 to 5) Select [ON] (to connect) or [OFF] (to disconnect). 1234XXXXXX : Mobile phone EC LEVEL Adjusts the echo volume level. : Audio device [–] / [+] (–5 to 5) MIC LEVEL Adjusts the volume level of the 4 Connect the selected device. Touching the operation keys performs the following [–] / [+] microphone. (–10 to 10) Paired Device List actions: Perform the following actions on the monitor panel to Device Name 1 adjust the volume of the call or earpiece. Device Name 2 [ ] Answers a call. Device Name 3 OK DDX396/DDX376BT: Turn the volume knob. J K Device Name 4 Connection [ ] Rejects a call. DDX276BT/DDX26BT/DDX419BT: Press volume / Device Name 5 Remove button. • Call information is displayed if acquired. • Phone operation is not available while the picture from the rear view camera is displayed.
ENGLISH 35
00_DDX_2019ST_KN_RN.indb 35 31/5/2018 2:44:27 PM Bluetooth®
Making a call 3 Select a contact (1), then make a call (2). When item 4 is selected in step 2: When item 1, 2 or 3 is selected in step 2: Enter the phone number (1), then make a 1 Display the phone control screen. 1 2 Device Name 1 Device Name 2 call (2). On the Home screen, touch as follows: Name 1 1 2 1234XXXXXX Device Name 1 Device Name 2 Name 2 2345XXXXXX 1234XXXXXX X Name 3 3456XXXXXX 12 3 A-Z Name 4 45 6 4567XXXXXX 78 9 Name 5 2 Select a method to make a call. 8901XXXXXX * 0/+ #
1 2 Device Name 1 Device Name 2 To use alphabet search in the phone book 1234XXXXXX X 1 Touch [ A-Z ]. • To enter “+”, touch and hold [0/+]. 12 3 2 Touch the first letter you want to search for on • To delete the last entry, touch [ X ]. 45 6 the keypad. 78 9 To search for a number, touch [1,2,3...]. * 0/+ # When item 5 is selected in step 2: 3 Select a contact you want call from the list. Say the name of the person you want to call. 1 From the call history* (missed calls/received Phone book search results: • Available only when the connected mobile calls/dialed calls) “Sort order”, “display order” or any other equivalent phone has a voice recognition system. 2 From the phone book* settings of the phone may affect and show • If the unit cannot find the target, “Please speak 3 From the preset list (Page 37) different search results (page display) of the phone into the microphone” appears. Touch [Start], 4 Use direct number entry book shown on the main unit. then say the name again. 5 Use voice dialling To display other phone numbers in the same • To cancel voice dialling, touch [Cancel]. * Applicable only for mobile phone compatible with PBAP (Phone contact Book Access Profile). You can store up to 10 phone numbers per contact. 1 Touch [ ]. 2 Select a contact you want call from the list.
36 ENGLISH
03_DDX_2019ST_KNRN_Body01.indd 36 20/8/2018 4:28:45 PM Bluetooth®
Switching between two connected devices Presetting phone numbers Bluetooth audio player You can change the device to use when 2 devices are You can preset up to five phone numbers. connected. KENWOOD Music Mix 1 Display the phone control screen. On the Home screen, touch as follows: When “BT Audio” is selected as the source, you can On the phone control screen: connect up to five Bluetooth audio devices at the 1 2 same time. You can easily switch between these five Device Name 1 Device Name 2 1234XXXXXX X devices by playing music from the device.
12 3 45 6 78 9 2 Select call history or phone book calling * 0/+ # method (1), then select a contact (2) to preset.
1 2 Device Name 1 Device Name 2 The active device is highlighted. Name 1 1234XXXXXX Name 2 2345XXXXXX Name 3 3456XXXXXX A-Z Name 4 4567XXXXXX Name 5 8901XXXXXX
BT Audio 3 Select a preset number to store into.
1 2 Device Name 1 Device Name 2
1234XXXXXX
2345XXXXXX
3456XXXXXX
No preset
No preset (Hold)
To delete the contact in the preset number: Touch [ ] besides the contact on the preset list.
ENGLISH 37
00_DDX_2019ST_KN_RN.indb 37 31/5/2018 2:44:27 PM Bluetooth®
1 Tag data* (current track title/artist name/album Selecting an audio file from the menu Bluetooth settings title) • Pressing [<] scrolls the text if not all of the text is 1 Display the audio menu. You can change various settings for using Bluetooth shown. On the source control screen, touch as follows: devices on the screen. 2 Signal strength and battery level 1 Display the screen. (Appear only when the information is acquired On the Home screen, touch as follows: from the device.) 3 Playing time*/playback status* 4 Connected device name 2 Select a category (1), then select a • Touching the device name switches to another desired item (2). connected Bluetooth audio device. Then, on the screen, touch as follows: BT Audio [System] : [Enter] * Available only for devices compatible with AVRCP 1.3. Playlists Artist 2 Make the settings. Album Bluetooth Setup Playback information and key operation Songs Paired Device List Enter • For playback information, see “Source control screen” Genre PIN Code 0000 on page 8. Device Name DDX3eX • For key operations on the touch panel, see “Common Device Address 01:20:03:40:05:60:07 operation keys on source control screen” on Auto Connect ON OFF BT Audio page 8. Bluetooth HF/Audio Front Only All Artist 1 Additional keys operations. Touching the operation Artist 2 Artist 3 keys performs the following actions: Artist 4 Display the list of registered devices. You can Artist 5 [ ] Displays screen. connect a device or delete registered devices. Change the PIN code of the unit. Select an item in each layer until you reach and select the desired file. Show the device name of this unit to be shown on the Bluetooth device — “DDX3eX”/“DDX2”/ “DDX3”/“DDX4”. Show the device address of the unit.
38 ENGLISH
00_DDX_2019ST_KN_RN.indb 38 31/5/2018 2:44:28 PM Bluetooth® Settings
Audio settings • ON (Initial): Automatically establishes a The following adjustments are memorized for each connection with the last connected Bluetooth Display the screen. source until you adjust the sound again. If the source device when the unit is turned on. On the Home screen, touch as follows: is a disc, the adjustments are stored for each of the • OFF: Cancels. following categories. • DVD/VCD Select the speakers used for Bluetooth mobile • CD • DivX*1/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC phones and Bluetooth audio players. Then, on the screen, touch [Audio]. • Front Only: Front speakers only. You cannot adjust the sound when the unit is in • All (Initial): All speakers. Setup standby. Audio Equalizer Enter Display Sound Effect Enter • ON: The unit answers the incoming calls Selecting a preset sound mode Input Fader / Balance Enter automatically in 5 seconds. System Speaker / X’over Enter Select a preset sound mode on the • OFF (Initial): The unit does not answer the calls Time Alignment Enter screen. automatically. Answer the calls manually. • Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/ Powerful/User
• ON (Initial): Establishes pairing automatically E.g. Audio settings screen for DDX396 Equalizer SRC Name with an iOS device (such as iPhone) connected Preset Natural Q factor 1.5 [dB] +9 via USB. (Auto pairing may not work for some You cannot change the screen in the +7 +5 +3 0 devices depending on the iOS version.) following situations: -3 -5 -7 • OFF: Cancels. • When the AV source is turned off. -9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz] • When the Bluetooth phone is used (making or Bass EXT ON OFF EQ INIT Touch and hold [Enter] to reset all settings you receiving a call, during a call, or while voice dialling). SW LEVEL 0 ALL SRC have made for using Bluetooth mobile phones and Bluetooth audio players. • To apply the adjusted equalizer to all playback sources, touch [ALL SRC], then touch [OK] to confirm.
ENGLISH 39
00_DDX_2019ST_KN_RN.indb 39 31/5/2018 2:44:28 PM Settings
Store your own sound adjustments Moves the center of the sound to the lower or higher Adjust the sound effect. 1 Select a preset sound mode. point. Select the height. • OFF (Initial)/Low/Middle/High 2 Select a band (1) and adjust the level (2), Adjusts loudness. then adjust the sound (3). *1 You cannot change the setting when “Radio” is selected as the • OFF (Initial)/Low/High Equalizer SRC Name source. Preset Natural Q factor 1.5 *2 This function works only when “DISC”/ “USB”/ “iPod”/ [dB] +9 +7 “Android™” is selected as the source. +5 +3 Selects the bass boost level. 0 -3 -5 -7 • OFF (Initial)/Level 1/Level 2/Level 3/Level 4/ -9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz] Level 5 Bass EXT ON OFF EQ INIT Touch [J]/[K]/[H]/[I] or drag the mark to adjust. SW LEVEL 0 ALL SRC Reduces the driving noise by raising the bandwidth. • OFF (Initial)/ON Adjusts the front and rear speaker output balance. Adjust the sound as follows: When using a two-speaker system, set the fader to the *1 center (0). Virtually enhances the sound space using the Digital • F15 to R15 (Initial: 0) Adjusts the width of the frequency. Signal Processor (DSP) system. Select the enhance • 1.35/1.5 (Initial)/2.0 level. • OFF (Initial)/Small/Medium/Large Adjusts the left and right speaker output balance. Activates/deactivates bass. • L15 to R15 (Initial: 0) • ON/OFF (Initial) *2 Restores the sound lost due to audio compression to a To clear the adjustment: Touch [Center]. Adjusts the subwoofer level.*2 realistic sound. • –50 to +10 (Initial: 0) • OFF/ON (Initial) • To clear the adjustment, touch [EQ INIT]. 3 Repeat step 2 to adjust the level of other Virtually makes the sound more realistic using the bands. Digital Signal Processor (DSP) system. Select the sound level. *1 Only for DDX419BT. • OFF (Initial)/Level 1/Level 2/Level 3 *2 Not adjustable when is selected for subwoofer on the screen. (Page 41)
40 ENGLISH
00_DDX_2019ST_KN_RN.indb 40 31/5/2018 2:44:28 PM Settings
4 Select the crossover network mode. 2 Select the speaker type (1), select the size Crossover network mode settings [2way] Select this when connecting speakers of the selected speaker (2), then display (Only for DDX396/DDX419BT) in a 2-way system (front/rear). the screen (3). Before making any settings for the speakers and [3way] Select this when connecting speakers crossover frequency, select the appropriate crossover in a 3-way system (tweeter/mid network mode according to the speaker system (2-way range/woofer). speaker system or 3-way speaker system). A confirmation message appears. Touch [Yes] to • Connecting 3-way speakers with 2-way crossover confirm. network mode selected may damage the speakers.
1 Display the source/option selection screen. Setting the speakers and crossover On the Home screen, touch as follows: frequency • If a speaker is not connected, select . 1 Select a car type (1), select the location • When setting the front speakers, also select the of the speakers (2), then display the speaker size for . screen (3). 2 Put the unit in standby. On the source/option selection screen, touch as follows:
3 Press the following buttons/knob on the monitor panel at the same time to display • Only for DDX396/DDX419BT: Speaker location the screen. selection is available only when is set to [2way]. • DDX419BT: MENU button and CAM button
ENGLISH 41
00_DDX_2019ST_KN_RN.indb 41 31/5/2018 2:44:28 PM Settings
3 Adjust the crossover frequency of the Determining the value for selected speaker. Make fine adjustments to the delay time of the speaker adjustment • Adjustable items vary depending on the selected output to create a more suitable environment for your If you specify the distance from the center of the speaker type/speaker size/crossover settings. car. currently set listening position to every speaker, the delay time will be automatically computed and set. / Select the listening position (1), select 1 Determines the center of the currently set Adjusts the output volume of the tweeter (left/ [Distance] or [Gain](2) to make an listening position as the reference point. right). 2 adjustment , then adjust each speaker Measures the distances from the reference point to the speakers. setting (3). Adjusts the crossover frequency for the tweeter. 3 Calculates the differences between the distance of the furthest speaker and other speakers. Adjusts the output volume of the selected speaker. 4 Sets the DTA value calculated in step 3 for individual speakers. 5 Adjusts the crossover frequency for the front or rear Adjusts gain for individual speakers. speakers (high pass filter). E.g. When is selected as the listening position Adjusts the crossover frequency for the speaker (low pass filter). 1 Select from , , or . +3.5 ft Adjusts the crossover slope. • Only for DDX396/DDX419BT: is selectable only when is set to Selects the phase for the speaker. [2way]. (Page 41) 1.4 ft 2 Select an item to adjust. 2.45 ft [Distance] Adjusts the digital time alignment value. 4.9 ft +2.45 ft [Gain] Adjusts the output volume of the selected speaker.
3 To determine the adjustment value, see the +0 ft following “Determining the value for adjustment”.
To initialize the setting value: Touch [Initialize].
42 ENGLISH
00_DDX_2019ST_KN_RN.indb 42 31/5/2018 2:44:28 PM Settings
Only for DDX396/DDX376BT/DDX419BT: : Change the illumination color of the Adjust and store the auto-adjustment volume level for • Auto (Initial): Dims the screen and button buttons on the monitor panel. each source. If the source is a disc, the adjustment is illumination when you turn on the headlights. stored for each of the following categories: – The ILLUMI lead connection is required. • DVD/VCD (Page 56) • CD • ON: Activates dimmer. • DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC • OFF: Deactivates dimmer.
The volume level will automatically increase or decrease when you change the source. You can change the display design. While playing a • –15 to +6 (Initial: 00) video or picture, you can capture an image and use • You can also adjust the illumination color yourself. the captured image as a background. Touch [Edit] to display the illumination color * Only for DDX419BT. • You cannot capture copyrighted content and adjustment screen, then select the dimmer setting images. and adjust the color. The adjustment is saved in Display settings • When using a JPEG file as the background, make sure [User]. that the resolution is 800 x 480 pixels. • Selecting [Scan] changes the illumination color Display the screen. • The color of the captured image may look different gradually. On the Home screen, touch as follows: from that of the actual scene. Storing your own scene for the background : Change the background design. image
Then, on the screen, touch [Display]. 1 While playing a video or picture, display the screen. Setup On the screen, touch as follows: Audio Dimmer Auto : [Enter] Display User Customize Enter Input OSD Clock ON OFF 2 Display the background design selection System Demonstration ON OFF screen, then touch [ Capture]. Scroll ON Once OFF
E.g. Display settings screen for DDX396
ENGLISH 43
00_DDX_2019ST_KN_RN.indb 43 31/5/2018 2:44:29 PM Settings
3 Adjust the image (1), then capture the image (2). • ON (Initial): Activates the display demonstration. Adjust the brightness and blackness of the screen. • OFF: Deactivates the display demonstration. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off), then change the following settings: • ON (Initial): Scrolls the displayed information Adjusts brightness. repeatedly. • –15 to +15 (Initial: 0 for dimmer on, +15 for dimmer Capture Cancel • Once: Scrolls the displayed information once. off) • OFF: Cancels. Touching [<] scrolls the text regardless of this setting. E.g. Image adjustment screen for DDX396 Adjusts blackness. • –10 to +10 (Initial: 0) [J][K][H][I] Moves the zooming frame. [ ] Magnifies the scene. Arrange the items to display on the Home screen. /// Select the color system of the external monitor. 1 Select an item ( ) to replace, then select the • NTSC (Initial)/PAL [IW]* Starts/pauses playback. item (2) you want to display in the selected position. [ ]* Advances scenes frame by frame. “Please Power Off” appears when the setting is Repeat this step to place icons for other items. changed. Turn off the power, then turn on to enable A confirmation message appears. Touch [Yes] • Only selectable sources are shown. the change. to store the newly captured image. (The existing image is replaced with the new one.) HOME Pandora Customize • To return to the previous screen, touch [No]. • To cancel the capture, touch [Cancel]. Select the viewing angle in relation to the monitor to make the image on the screen easier to see. * Not displayed when playing an external component connected to • Under 0° (Initial)/5°/10°/15°/20° the AV-IN input terminal. iPod TEL RadioRdi
E.g. Home customize screen for DDX396 • ON: Displays the clock while a video source is playing. • OFF (Initial): Cancels.
44 ENGLISH
00_DDX_2019ST_KN_RN.indb 44 31/5/2018 2:44:29 PM Settings
Input settings Adjust the parking guidelines according to the size of Select where information about obstacles is displayed Display the screen. Then, on the screen, touch [Input]. On the Home screen, touch as follows: Setup
Audio Rear Camera Enter Display Parking Assist Enter Input Then, on the screen, touch [System]. System Initialize Setup
Audio Language English Display Clock Enter E.g. Input settings screen for DDX396 Input Smartphone Setup Enter Make sure that A and B are horizontally parallel, and System Bluetooth Setup Enter that C and D are the same length. OEM Setup Enter • Touch and hold [Initialize ] for 2 seconds to set all Configure the rear view camera settings. the marks to the initial default position. E.g. System settings screen for DDX396 • ON: Displays the picture from the rear view camera (Only for DDX396/DDX376BT/DDX276BT) when you shift the gear to the reverse (R) position. Select the text language used for on-screen – A caution message appears on the screen. To information. For details, see “Initial settings” on Configure settings for using the ADS adapter. remove the caution message, touch the screen. page 5. • OFF (Initial): Select this when no camera is “Please Power Off” appears when the setting is connected. When an ADS adapter is connected, you can display changed. Turn off the power, then turn on to enable information about obstacles around the car. the change. • ON: Always displays information. • ON (Initial): Displays the parking guidelines. • Dyn. (Initial): Displays information when the sensor • OFF: Hides the parking guidelines. detects obstacles. • OFF: Cancels. Set the clock. For details, see “Clock settings” on page 6.
ENGLISH 45
00_DDX_2019ST_KN_RN.indb 45 31/5/2018 2:44:29 PM Settings
If [Android/Other] is selected in step 1: Specify the connection method of Android/iPod/ Smartphone Setup (Only for DDX396/DDX376BT/DDX276BT) iPhone. Bluetooth Get information, and change the settings for using the 1 Select the device type (1), then touch ADS adapter. [Change] (2).
Smartphone Setup Next Initial Information For DDX396/DDX419BT, this setting is available only Device Type iPod / iPhone when 2-way speaker system is selected. (Page 41) Connection Type Bluetooth The screen appears. Go to Device Name Device Name • ON (Initial): Activates the key-touch tone. step 3. Device Type Select • OFF: Deactivates the key-touch tone. iPod / iPhone Android / Other Change 3 When selecting [Bluetooth] as the connection method: Select the device (1), then press [OK] (2) to connect. Memorize, recall, or clear the settings you have made. 2 Select the connection method (1), then • If the device is already connected, skip step 1. • The memorized settings are kept even when the unit confirm the selection ([OK] or [Next]) (2). Paired Device List is reset.
If [iPod/iPhone] is selected in step 1: Device Name 1 • Available only when is set to Smartphone Setup Device Name 2 [Unlock] (selected initially). Device Name 3 OK USB 1 Wire Bluetooth Device Name 4 Connection Touch [Yes] to display the setting screen, then select Device Name 5 Remove an operation: • Recall: Recalls the memorized settings. OK • Memory: Memorizes the current settings. • Clear: Clears the currently memorized settings and return to the factory (initial) settings. Configure settings for using a Bluetooth device, such • Cancel: Cancels. [USB 1 Wire] Select this when the device is as connection and other general operations. For connected via the USB input details, see “Bluetooth settings” on page 38. A confirmation message appears. Touch [Yes]. terminal (cable from the rear panel). You can also set to lock the from being changed. Touch [Lock] to lock the settings. [Bluetooth] Select this when the device is • Some items in menu, e.g. , cannot be adjusted when [Lock] is step 3.) selected.
46 ENGLISH
04_DDX_2019ST_KNRN_Body02.indd 46 31/5/2018 4:49:47 PM Settings
• To reset the touch position, touch [Reset]. 4 Repeat steps 2 and 3 to register other • To cancel the current operation, touch [Cancel]. (Only for DDX419BT) buttons. This unit has its own Registration Code. Once you 5 Touch [Done] to finish the procedure. have played back a file with the Registration Code • The unit can register/change all of the buttons’ recorded, this unit’s Registration Code is overwritten (Only for DDX419BT) functions at the same time. To do this, press all for copyright protection. Assign functions to the keys of the remote controller buttons in turn and after pressing all of them, touch • Touch [Enter] to display the information. on the steering wheel. [Done] on the • To return to the previous screen, touch [OK]. • This function is available only when your car is screen. However, new functions cannot be learned equipped with the electrical steering remote after this operation. controller. • When changing the functions already learned, touch • You can only register/change the functions while (Only for DDX419BT) the assigned function you want to change in step 3 you are parked. and then touch to select the new function from the Register the security code for the unit. (Page 6) • If your steering remote controller is not compatible, function list. learning may not be completed and an error • Confirm the contents of the settable functions in the message may appear. function list. You cannot edit the function list. (Only for DDX396/DDX376BT/DDX276BT/DDX26BT) • For connection, see page 57 for more information. Displays the serial number. 1 Touch [Set] for to display the setting screen. . • A confirmation message appears. Touch [Yes]. 2 Press and hold a button on the steering – To cancel the initialization, touch [No]. Adjust the touch positions of the buttons on the remote controller to register or change. screen. 3 Select a function to assign to the selected Touch the center of the marks at the upper left (1), button. the lower center (2), then the upper right (3) as Steering Remote Control Setting instructed. Please select the function to assign to the button. Touch Panel Adjust VOL VOL ATT
Done SRC
Cancel Reset
ENGLISH 47
00_DDX_2019ST_KN_RN.indb 47 31/5/2018 2:44:29 PM Settings Remote Controller
• For DDX419BT: This unit can be operated using the CAUTION remote controller (RC-DV340) supplied with this unit. Update the system by connecting a USB device • For DDX396/DDX376BT/DDX276BT/DDX26BT: • Put the Remote Controller in a place where it will containing an update file. Optional remote controller KNA-RCDV331 is not move during braking or other operations. A • To obtain the update file, visit designed for controlling this unit. Refer to the dangerous situation could result if the Remote with water and consult a physician. Updates the system application. • Place the battery out of reach of children. In the unlikely event that a child swallows the battery, Updates the system. immediately consult a physician. • If you turned the power off then on or turn the * DO NOT expose the remote sensor to bright ignition switch off then on after selecting , light (direct sunlight or artificial lighting). the unit will reset. Updates the DVD system application. The system update starts. It may take a while. If the update has been completed successfully, “Update Completed” appears, then reset the unit. RC-DV340 • Do not disconnect the USB device while updating. • If the update has failed, turn the power off and then on, and retry the update.
Shows the Open Source Licenses.
48 ENGLISH
00_DDX_2019ST_KN_RN.indb 48 31/5/2018 2:44:30 PM Remote Controller
Preparation Remote Controller mode switch Basic operations for RC-DV340 (supplied) Battery installation The functions operated from the remote controller Common operations (AUD mode) differ depending on the position of the mode switch. Use two “AAA”/“R03”-size SRC • Selects the source. batteries. • Hangs up the incoming/current call. Insert the batteries with the + AUD and – poles aligned properly, t J/K VOL Adjusts the volume level. AUDt DVD t following the illustration inside DVDt TV t ATT Attenuates/restores the sound. TVt t the case. NAV • Always insert batteries from DISP/V.SEL Switches to the current source control – poles to avoid bending the screen. springs. • AUD mode: Switch to this mode when controlling a ENTER Enters options. • If the Remote Controller selected source or tuner source, etc. Answers incoming calls. operates only over shorter distances or does not • DVD mode: Switch to this mode when playing DVDs operate at all, it is possible that the batteries are or CDs etc. with the player integrated in this unit. FNC/PBC/ Switches the control screen. depleted. In such instances, replace both batteries • TV mode: Not used. MENU with new ones. • NAV mode: Not used. MODE/TOP Changes the aspect ratio. • The position of the remote control mode switch is MENU • The aspect ratio changes each time indicated in the title of each mode, e.g., “AUD mode”. you press this key. • When controlling a player that is not integrated in OPEN Not used for this unit. the unit, select “AUD” mode.
ENGLISH 49
00_DDX_2019ST_KN_RN.indb 49 31/5/2018 2:44:30 PM Remote Controller
DVD/VCD (DVD mode) DIRECT Enters direct search mode. iPod/Android (AUD mode) CLEAR Deletes a character while in direct J/K/H/I Moves the cursor when displaying a S/T Selects music/videos. search mode. menu. I/W Starts/pauses playback. S/T Selects a track. I/W Starts/pauses playback. Music Disc/Audio file/Video file/Picture file (AUD mode) USB (AUD mode) o Stops and memorizes the point where the disc stops. AM –/FM + Selects a folder. AM –/FM + Selects a folder. 0 – 9 • Specifies the number to search for S/T Selects a track/file. S/T Selects a file. in direct search. I W I W • 1/2: Fast forwards/backwards. / Starts/pauses playback. / Starts/pauses playback. – Fast forward/backward speed 0 – 9 Specifies the number to search for in changes each time you press this direct search. Searching for an item directly key. DIRECT Enters direct search mode. • 4/5: Slow forwards/backwards While listening to the radio or during disc playback, during pause. you can search for a station frequency/chapter/title/ folder/file/track directly using the number buttons. MODE/TOP Shows the disc top menu. Radio (AUD mode) • To search for a track from the VCD menu, perform MENU during PBC playback. FNC/PBC/ Shows the disc menu. AM –/FM + Selects the band. MENU S/T Searches for stations.* 1 Press DIRECT to enter the search mode. • Each time you press DIRECT, the item to search SUBTITLE Changes the subtitle language. I W / Changes the seek mode (AUTO1, for changes. ZOOM Changes the zoom ratio. AUTO2, MANU). • The zoom ratio changes each time 0 – 9 • Specifies preset number. (1-5) 2 Press a number button to select a desired you press this key. • Specifies the frequency of the item (station frequency/chapter/title/ ANGLE Changes the picture angle. station to receive to search for in folder/file/track). • The picture angle changes each direct search. • To erase a misentry, press CLEAR. time you press this key. DIRECT Enters direct search mode. 3 Confirm the selection. AUDIO Changes the voice language. • For station frequency: Press S/T. * The search method differs according to the selected seek mode. • The voice language changes each • For others: Press ENTER. time you press this key. To exit the search mode: Press DIRECT.
50 ENGLISH
00_DDX_2019ST_KN_RN.indb 50 31/5/2018 2:44:30 PM Remote Controller
Basic operations for KNA-RCDV331 MAP DIR/OPEN Not used for this unit. * +/CLEAR Deletes a character while in direct search mode. (optionally purchased) NAV/DISP Not used for this unit. # BS/DIRECT Enters direct search mode. ZOOM OUT/IN Not used for this unit. ROUTE M/ Shows the disc top menu. 2 ZONE Not used for this unit. MODE/ R.VOL Not used for this unit. TOP MENU VOICE/FNC/ • Shows the disc menu. * Available only when the AUD mode is selected. MENU/PBC • Turns the playback control on or off while playing VCD. DVD/VCD (DVD mode) CANCEL/ Displays previous screen. RETURN J/K/H/I Moves the cursor when displaying a menu. AUDIO Changes the voice language. • The voice language changes H/S / T/I Selects a track. each time you press this key. J/FM+ / K/AM− Selects a folder. Common operations (AUD/DVD mode) SUBTITLE Changes the subtitle language. POSITION/IW Starts/pauses playback. ANGLE Changes the picture angle. SRC* • Selects the source. MENU/o Stops and memorizes the point • The picture angle changes each • Hangs up the incoming/current where the disc stops. time you press this key. call. 0 – 9 • Specifies the number to search ZOOM Changes the zoom ratio. J K VOL / Adjusts the volume level. for in direct search. • The zoom ratio changes each ATT Attenuates/restores the sound. • 1/2: Fast forwards/backwards. time you press this key. • 4/5: Slow forwards/backwards. VOICE/FNC/ For discs/USB/iPod: Switches to the (For DVD only) MENU/PBC* current source control screen. – Slow forward/backward speed ENTER Enters options. changes each time you press Answers incoming calls. this key. ROUTE M/ Changes the aspect ratio. MODE/ • The aspect ratio changes each TOP MENU* time you press this key. VIEW/AV OUT Switches the AV source to be output.
ENGLISH 51
00_DDX_2019ST_KN_RN.indb 51 31/5/2018 2:44:30 PM Remote Controller
Music Disc/Audio file/Video file/Picture file iPod/Android (AUD mode) Searching for an item directly (AUD mode) While listening to the radio or during disc playback, H/S / T/I Selects music/videos. you can search for a station frequency/chapter/title/ J/FM+ / K/AM− Selects a folder. POSITION/IW Starts/pauses playback. folder/file/track directly using the number buttons. H/S / T/I Selects a track/file. • To search for a track from the VCD menu, perform during PBC playback. POSITION/IW Starts/pauses playback. USB (AUD mode) 1 Press # BS/DIRECT to enter the search 0 – 9 Specifies the number to search for J K in direct search. /FM+ / /AM− Selects a folder. mode. • Each time you press # BS/DIRECT, the item to H/S / T/I Selects a file. # BS/DIRECT Enters direct search mode. search for changes. POSITION/IW Starts/pauses playback. 2 Press a number button to select a desired Radio/SiriusXM*1 (AUD mode) item (station frequency/chapter/title/ folder/file/track). J K /FM+ / /AM− Selects the band. • To erase a misentry, press * +/CLEAR. H S T I / / / Searches for stations.*2 3 Confirm the selection. POSITION/IW Changes the seek mode (AUTO1, • For station frequency: Press H/S / T/I. AUTO2, MANU). • For others: Press ENTER. 0 – 9 • Specifies preset number. (1-5) • Specifies the frequency of the To exit the search mode: Press # BS/DIRECT. station to receive to search for in direct search. # BS/DIRECT Enters direct search mode.
*1 Only for DDX396/DDX376BT/DDX276BT/DDX26BT. *2 The search method differs according to the selected seek mode.
52 ENGLISH
00_DDX_2019ST_KN_RN.indb 52 31/5/2018 2:44:30 PM Remote Controller Installation and Connection
KENWOOD Remote APP WARNINGS Before installation KENWOOD Remote is an application that connects • DO NOT connect the ignition wire (red) and the Precautions on installation and connection and controls compatible KENWOOD car receivers via battery wire (yellow) to the car chassis (ground), you Bluetooth® like a wireless remote control. may cause a short circuit, that in turn may start a fire. • Mounting and wiring this product requires skills and • DO NOT cut out the fuse from the ignition wire (red) experience. For best safety, leave the mounting and You can also operate this unit from a Smartphone and the battery wire (yellow). The power supply must wiring work to professionals. using KENWOOD Remote APP. be connected to the wires via the fuse. • Mount the unit so that the mounting angle is 30° or This application can display the source information • Always connect the ignition wire (red) and the less. of this unit on the smartphone’s screen, and enables battery wire (yellow) to the power source running • Make sure to ground the unit to a negative 12 V DC the user to make an audio setting using the graphic through the fuse box. power supply. user interface of this application. • Do not install the unit in a location exposed to direct sunlight or excessive heat or humidity. Also avoid This application also works as a free standalone CAUTIONS music player application, when your Smartphone is places with too much dust or the possibility of water not connected to this unit. • Install this unit in the console of your car. splashing. • For details, visit
ENGLISH 53
00_DDX_2019ST_KN_RN.indb 53 31/5/2018 2:44:30 PM Installation and Connection
• If your car’s ignition does not have an ACC position, Parts list for installation Installation procedure connect the ignition wires to a power source that Note: This parts list does not include all the package can be turned on and off with the ignition key. If you 1 Remove the key from the ignition and contents. connect the ignition wire to a power source with a disconnect the · battery. constant voltage supply, such as with battery wires, ¥ Wiring harness (× 1) the battery may be drained. ø Extension wire, 2 m (× 1) 2 Make the proper input and output wire • If the fuse blows, first make sure the wires are not π Flat head screws, M5 × 8 mm (× 6) connections for each unit. [ Round head screws, M5 x 8 mm (× 6) touching to cause a short circuit, then replace the old 3 Connect the speaker wires of the wiring fuse with one with the same rating. “ Microphone, 3 m (× 1) harness. • Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not Only for DDX396/DDX419BT 4 Connect the wires of the wiring harness remove the caps and do not let the cable out at the ] Trim plate (× 1) in the following order: ground, battery, ends of the unconnected wires or the terminals. ignition. • Secure the wires with cable clamps and wrap vinyl Only for DDX396 tape around the wires that comes into contact with ‘ Mounting sleeve (× 1) 5 Connect the wiring harness to the unit. metal parts to protect the wires and to prevent short \ Extraction keys (× 2) 6 Install the unit in your car. circuit. Make sure that the unit is installed securely in place. Only for • Connect the speaker wires correctly to the terminals DDX419BT If the unit is unstable, it may malfunction (e.g., the « Audio and video cable (× 1) to which they correspond. The unit may be damaged sound may skip). or fail to work if you share the · wires or ground Å Steering remote cable (× 1) · them to any metal part in the car. 7 Reconnect the battery. • When only two speakers are being connected to the 8 Press the reset button on the monitor system, connect both connectors either to the front panel. (Page 4) output terminals or to the rear output terminals (do not mix front and rear). For example, if you connect 9 Configure . (Page 5) the ª connector of the left speaker to a front output terminal, do not connect the · connector to a rear output terminal.
54 ENGLISH
04_DDX_2019ST_KNRN_Body02.indd 54 20/8/2018 4:29:56 PM Installation and Connection
Installing the unit Installing the trim plate 2 Remove from the upper two catches of the trim plate (]). Installing the unit using the mounting (Only for DDX396/DDX419BT) bracket removed from the car ] π / [
The frame can be removed from the top side in the Car bracket same manner. π / [ 3 Remove the unit by inserting the two Removing the unit extraction keys (\), then pulling them as Note: Select the appropriate screws (supplied) for the (Only for DDX396) mounting bracket. illustrated. 1 Engage the catch pins on the extraction Installing the unit using the mounting keys (\) and remove the two locks on the \ sleeve lower part of the trim plate (]). (Only for DDX396) ] Catch Lock ‘
Be careful to avoid injury from the catch pins on \ the extraction key.
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
ENGLISH 55
00_DDX_2019ST_KN_RN.indb 55 31/5/2018 2:44:31 PM Installation and Connection
Wiring connection
10 A fuse *1 Only for DDX396/DDX376BT/DDX276BT/ DDX26BT. “ *2 Only for DDX396/DDX376BT/DDX276BT. *3 Only for DDX419BT. *4 Only for DDX396/DDX419BT: For 3-way speaker system connection, see also page 57.
Connect the antenna cord to the antenna terminal
*1 *2 *3 USB input terminal (1 m) Purple with white stripe REVERSE To the car’s reverse lamp harness when using the optional rear view camera Light green To the car’s parking brake detection switch harness ¥ PRK SW Extension wire ( ø ) (For best safety, be sure to connect the parking sensor.) White ] / White with black stripe [ To front speakers/mid range speakers*4 (left) Gray ] / Gray with black stripe [ To front speakers/mid range speakers*4 (right) Green ] / Green with black stripe [ To rear speakers/tweeter speakers*4 (left) Purple ] / Purple with black stripe [ To rear speakers/tweeter speakers*4 (right) Brown MUTE Not used. Orange with white stripe ILLUMI To the car light control switch
STEERING WHEEL Light blue with yellow stripe REMOTE INPUT REMOTE CONT To the OE remote adapter (not supplied) which is compatible with your car
Blue with white stripe (12 V 350 mA) ANT.CONT To the power control terminal when using the optional power amplifier (Or) P.CONT To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Red (Ignition wire) Ignition key switch Yellow (Battery wire) Car fuse Black (Ground wire) Car battery To the car chassis
56 ENGLISH
04_DDX_2019ST_KNRN_Body02.indd 56 20/8/2018 4:34:58 PM Installation and Connection References
Connecting external components 7 Rear view camera input (R-CAM) Maintenance 8 Output terminals*5 • Left output (White) Cleaning the unit • Right output (Red) • Do not use any solvent (for example, thinner, REAR: Rear speaker preouts benzine, etc.), detergent, or insecticide. This may FRONT: Front speaker preouts damage the monitor or the unit. SW: Subwoofer preouts • Gently wipe the panel with a soft, dry cloth. For 3-way crossover*6: Handling discs REAR: Tweeter preouts • Do not touch the recording surface of the disc. FRONT: Mid-range speaker preouts • Do not stick tape etc. on the disc, or use a disc with SW: Woofer preouts tape stuck on it. • Do not use any accessories for the disc. *1 Only for DDX396/DDX376BT/DDX276BT/DDX26BT. • Clean from the center of the disc and move outward. *2 Only for DDX396/DDX376BT/DDX276BT. • Clean the disc with a dry silicone or soft cloth. Do not *3 Only for DDX419BT. 1 use any solvents. Expansion port for connecting SiriusXM Connect *4 Use the audio and video cable («: supplied for DDX419BT) to • When removing discs from this unit, pull them out Vehicle Tuner (EXT I/F) (commercially available)*1 connect an external component. 2 horizontally. iDatalink input for connecting an ADS adapter *5 When connecting an external amplifier, connect its ground wire • Remove burrs from the center hole and disc edge (commercially available)*2 to the chassis of the car; otherwise the unit may be damaged. 3 before inserting a disc. Steering wheel remote controller input *6 Only for DDX396/DDX419BT. (REMO-IN)*3 • Connect to the car’s steering remote harness More information using the steering remote cable (Å). Contact your KENWOOD dealer for details. About playable files 4 Microphone input (MIC) (Page 56) Audio files 5 Audio video input (AV-IN)*4 • This unit can play back the following files with Connect the following type of 4-pole mini plug: following codec and extension code: 1 1 3 Left audio – For disc: MP3 (.mp3), WMA (.wma), WAV (.wav), 2 Right audio AAC (.m4a) 3 24 Ground – For USB mass storage class device: MP3 (.mp3), 4 Composite video WMA (.wma), WAV (.wav), AAC (.aac, .m4a), 6 Video output (V-OUT) FLAC (.flac)
ENGLISH 57
04_DDX_2019ST_KNRN_Body02.indd 57 20/8/2018 4:35:10 PM References
• This unit can play back files that meet the conditions – AAC files copy-protected with FairPlay (except Picture files below: those stored on an iPod/iPhone). • This unit can play back the following files with – Bit rate: – Files which have data such as AIFF, ATRAC3, etc. following codec and extension code: MP3: 8 kbps – 320 kbps – JPEG (.jpg, .jpeg) WMA: For disc: 5 kbps – 320 kbps Video files • Other playable conditions: For USB : 32 kbps – 192 kbps • This unit can play back the following files with – Resolution: 32 × 32 to 8 192 × 7 680 (It may take AAC: 16 kbps – 320 kbps following codec and extension code: time to display the file depending on its resolution.) – Sampling frequency: – DivX* (.divx, .div, .avi) regardless of the letter case— – Baseline JPEG files MP3: 16 kHz – 48 kHz upper/lower • This unit cannot play back the following files: WMA: 8 kHz – 48 kHz – MPEG1/MPEG2 (.mpg, .mpeg) – Progressive JPEG files WAV: 44.1 kHz • Streams that conform to: – Lossless JPEG files AAC: 32 kHz – 48 kHz – DivX*: FLAC: 8 kHz – 96 kHz Audio: MP3 or Dolby Audio About disc playback – Files recorded in VBR (variable bit rate), and have a – MPEG1/MPEG2: Playable disc types Audio: MPEG1 Audio Layer-2 or Dolby Audio discrepancy in elapsed time indication • CD-DA: Audio CD, CD Text Video: MPEG system/program stream • This unit can show or display the following: • DVD Video: Region code: 1 or 4 (depending on the • Other playable conditions: – Tag: country and sales area) – Video file size: Less than 2 GB MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.4) • Dual Disc: DVD side – DivX*: Bit rate: 8 Mbps (maximum for average video WMA Tag • VCD: Video CD (PBC compatible) signals) WAV Tag • DVD Recordable/Rewritable (DVD-R/-RW, +R/+RW) – MPEG1/MPEG2: File format: MP@ML (Main Profile at AAC Tag – DVD Video: UDF bridge Main Level)/SP@ML (Simple Profile at Main Level)/ FLAC Tag – ISO 9660 level 1, level 2, Romeo, Joliet MP@LL (Main Profile at Low Level) – Jacket picture: – Other playable formats: • This unit cannot play back the following files: Picture size: 32 × 32 to 1 232 × 672 resolution DVD-R recorded in multi-border format (except for – DivX files encoded in the interlaced scanning Data size: Less than 500 KB dual layer discs) mode. File type: JPEG Finalized +R/+RW (Video format only) • This unit cannot play back the following files: • CD Recordable/Rewritable (CD-R/-RW): * Only for DDX419BT. – MP3 files encoded with MP3i and MP3 PRO format. – ISO 9660 level 1, level 2, Romeo, Joliet – MP3 files encoded with Layer 1/2. • Other informations: – WMA files encoded with lossless, professional, and – While playing a DVD Video, DTS sound cannot be voice format. reproduced or emitted from this unit. – WMA files which are not based upon Windows Media® Audio. – WMA/AAC files copy-protected with DRM.
58 ENGLISH
00_DDX_2019ST_KN_RN.indb 58 31/5/2018 2:44:31 PM References
– This unit can recognize a total of 5 000 files and Language codes (for DVD language selection) LV Latvian, Lettish SM Samoan 250 folders (a maximum of 999 files per folder) in a AA Afar GD Scots Gaelic MG Malagasy SN Shona recordable/rewritable disc. AB Abkhazian GL Galician MI Maori SO Somali – Use only “finalized” recordable/rewritable discs. AF Afrikaans GN Guarani MK Macedonian SQ Albanian – This unit can play back multi-session recordable/ AM Ameharic GU Gujarati ML Malayalam SR Serbian rewritable discs; however, unclosed sessions will be AR Arabic HA Hausa MN Mongolian SS Siswati skipped while playing. AS Assamese HI Hindi MO Moldavian ST Sesotho AY Aymara HR Croatian Unplayable disc types and formats MR Marathi SU Sundanese • DVD-Audio/DVD-ROM discs AZ Azerbaijani HU Hungarian MS Malay (MAY) SW Swahili • SVCD (Super Video CD), CD-ROM, CD-I (CD-I Ready), BA Bashkir HY Armenian MT Maltese TA Tamil DTS-CD BE Byelorussian IA Interlingua MY Burmese TE Telugu • MPEG4/DivX*/AAC (.aac)/FLAC/MKV/DVD–VR/ BG Bulgarian IE Interlingue NA Nauru TG Tajik DVD+VR/DVD-RAM recorded on DVD-R/RW or BH Bihari IK Inupiak NE Nepali TH Thai +R/+RW BI Bislama IN Indonesian NO Norwegian TI Tigrinya • MPEG4/DivX*/AAC (.aac)/FLAC/MKV recorded on BN Bengali, Bangla IS Icelandic OC Occitan TK Turkmen CD-R/RW BO Tibetan IW Hebrew OM (Afan) Oromo TL Tagalog • DVD-RW dual layer discs BR Breton JA Japanese OR Oriya TN Setswana • +RW double layer discs CA Catalan JI Yiddish PA Panjabi TO Tonga • Non-DVD side of a “DualDisc” which does not comply CO Corsican JW Javanese PL Polish TR Turkish with the “Compact Disc Digital Audio” standard CS Czech KA Georgian PS Pashto, Pushto TS Tsonga • Discs that are not round. CY Welsh KK Kazakh QU Quechua TT Tatar • Discs with coloring on the recording surface or discs DZ Bhutani KL Greenlandic RM Rhaeto-Romance TW Twi that are dirty. EL Greek KM Cambodian • Recordable/Rewritable discs that have not been RN Kirundi UK Ukrainian finalized. EO Esperanto KN Kannada RO Rumanian UR Urdu • 3 inch discs. Attempting to insert these discs using ET Estonian KO Korean (KOR) RW Kinyarwanda UZ Uzbek an adapter may cause a malfunction. EU Basque KS Kashmiri SA Sanskrit VI Vietnamese • Some recordable/rewritable discs or files may not be FA Persian KU Kurdish SD Sindhi VO Volapuk played back due to their characteristics or recording FI Finnish KY Kirghiz SG Sangho WO Wolof conditions. FJ Fiji LA Latin SH Serbo-Croatian XH Xhosa FO Faroese LN Lingala SI Singhalese YO Yoruba * Only for DDX396/DDX376BT/DDX276BT/DDX26BT. FY Frisian LO Laothian SK Slovak ZU Zulu GA Irish LT Lithuanian SL Slovenian
ENGLISH 59
00_DDX_2019ST_KN_RN.indb 59 31/5/2018 2:44:31 PM References
About USB playback • Electrostatic shock at connecting a USB device may iPod/iPhone that can be connected cause abnormal playback of the device. In this case, • Via the USB terminal: Important disconnect the USB device then reset this unit and Made for Make sure all important data has been backed up to the USB device. – iPod nano (7th Generation) avoid losing the data. • Do not pull out and connect the USB device – iPod touch (5th and 6th Generation) We bear no responsibility for any loss of data stored in repeatedly while “Reading” is shown on the screen. – iPhone 4S, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, the devices while using this unit. • Operation and power supply may not work as 7 Plus, 8, 8 Plus, X intended for some USB devices. • Via Bluetooth: Playable files on a USB device • Do not leave a USB device in the car, or expose to Made for • This unit can play the following types of files stored direct sunlight or high temperatures to prevent – iPod touch (5th and 6th Generation) in a USB mass storage class device. deformation or damage to the device. – iPhone 4S, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, – JPEG/Divx*/MPEG1/MPEG2/MP3/WMA/WAV/AAC 7 Plus, 8, 8 Plus, X (.aac/.m4a)/FLAC Unplayable USB device • This unit can recognize: • This unit may not play back files in a USB device Notes on using an iPod/iPhone – A total of 5 000 files properly when using a USB extension cable. • When operating an iPod/iPhone, some operations – 250 folders for video files and a maximum of 999 • USB devices equipped with special functions such as may not be performed correctly or as intended. In files per folder data security functions cannot be used with the unit. this case, visit the following KENWOOD web site: – 250 folders for photo files and a maximum of 999 • Do not use a USB device with 2 or more partitions.
60 ENGLISH
00_DDX_2019ST_KN_RN.indb 60 31/5/2018 2:44:31 PM Troubleshooting
What appears to be trouble is not always serious. “Learning Process Failed” appears.*2 Tracks on the recordable/rewritable discs are not Check the following points before calling a service Your steering remote controller is not compatible, played back as you have intended them to play. center. learning may not be completed. Consult your car Playback order may differ from the one played back • For operations with external components, refer also audio dealer for details. using other players. to the instructions supplied with the adapters used *1 For DDX396/DDX376BT/DDX276BT/DDX26BT: Purchase optional “Region Code Error” appears. for connection (as well as the instructions supplied remote controller, KNA-RCDV331. You have inserted a DVD Video disc of an incorrect with the external components). *2 Only for DDX419BT. region code. Insert a correct region code disc. General Discs USB No sound comes out of the speakers. Recordable/Rewritable discs cannot be played back. “Reading” does not disappear from the screen. Adjust the volume to the optimum level. Insert a finalized disc. Turn the power off and on again. Check the cords and connections. Finalize the discs with the component which you While playing a track, sound is sometimes No picture is displayed on the screen. used for recording. interrupted. Turn on the screen. (Page 4) Tracks on the Recordable/Rewritable discs cannot The tracks are not properly copied into the USB The unit does not work at all. be skipped. device. Copy the tracks again, and try again. Reset the unit. (Page 4) Insert a finalized disc. Finalize the discs with the component which you Tracks are not played back as you have intended The remote controller*1 does not work. used for recording. them to play. Replace the battery. Playback order may differ from the one played back Playback does not start. using other players. “No Signal”/“No Video Signal” appears. The format of files is not supported by the unit. Start playback on the external component The source does not change to “USB” when you connected to the AV-IN input terminal. No picture appears on the external monitor. connect a USB device while listening to another Check the cords and connections. Connect the video cord correctly. source or “USB Device Error” appears when you Signal input is too weak. Select the correct input on the external monitor. connect a USB device. The USB port is drawing more power than the “Miswiring DC Offset Error”/“Warning DC Offset DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC discs design limit. Error” appears. cannot be played back. Turn the power off and unplug the USB device. A speaker cord has shorted or it has come into Record the tracks using a compatible application Then, turn on the power and reattach the USB contact with the car chassis. Wire or insulate the on the appropriate discs. (Page 58) device. speaker cord as appropriate, then reset the unit. Add appropriate extension codes to the file names. If the above does not solve the problem, turn “Parking off” appears. * Only for DDX419BT. the power off and on (or reset the unit) before No playback picture is shown when the parking replacing with another USB device. brake is not engaged.
ENGLISH 61
00_DDX_2019ST_KN_RN.indb 61 31/5/2018 2:44:31 PM Troubleshooting
Android Sound is distorted. “Please update Pandora App” appears. Deactivate the equalizer either on this unit or the The Pandora application on your iPod touch/ Sound cannot be heard during playback. iPod/iPhone. iPhone/Android is not the latest version. Update Reconnect the Android device. the application. Launch any media player application on the A lot of noise is generated. Android device and start playback. Turn off (uncheck) “VoiceOver” on the iPod/ iPhone. “Please check device.” appears. For details, visit . The Pandora application on your iPod touch/ Sound output only from the Android device. iPhone/Android has not started up. Use another media player application. No operations are available when playing back a The Pandora application is not installed on the Restart the Android device. track containing artwork. connected device. If this does not solve the problem, the connected Operate the unit after the artwork has loaded. An error has occurred on the Pandora application. Android device is unable to route the audio signal “Authorization Error” appears. to unit. “Login Error” appears. Check whether the connected iPod/iPhone is If USB connection does not work, connect the You have not been signed into Pandora. Android device via Bluetooth or through the AV-IN compatible with this unit. (Page 60) jack on the rear panel. “No skips remaining” appears. Radio No more songs can be skipped. “NO DEVICE” or “READING” keeps flashing. AME automatic presetting does not work. Reconnect the Android device. “Failed to save your thumb rating” appears. Store stations manually. (Page 17) If USB connection does not work, connect the Thumb-up/down is prohibited. Android device via Bluetooth or through the AV-IN Static noise while listening to the radio. “No Station” appears. jack on the rear panel. Connect the antenna firmly. No station is available.
iPod/iPhone AV-IN “No Active Station” appears. No station is being played. No sound comes out of the speakers. No picture appears on the screen. Disconnect the iPod/iPhone, then connect it again. Turn on the video component if it is not on. “Station limit reached” appears. Select another source, then reselect “iPod”. Connect the video component correctly. The station list is full and no more stations can be registered. The iPod/iPhone does not turn on or does not work. Pandora*/iHeartRadio*/Spotify “Failed to save your bookmark” appears. Check the connection. The application does not work. The unit has failed to save a bookmark. Try the Update the firmware version. The application on your iPod touch/iPhone/ operation again. Charge the battery. Android is not the latest version. Update the Reset the iPod/iPhone. application.
62 ENGLISH
04_DDX_2019ST_KNRN_Body02.indd 62 5/6/2018 4:33:38 PM Troubleshooting
“Limited Connectivity” appears. “SXM Check Tuner” appears. Bluetooth The connection with the Pandora application Make sure the SiriusXM Connect Vehicle Tuner is Phone sound quality is poor. cannot be established. connected to the unit. Reduce the distance between the unit and the “Pandora not available” appears. “SXM Chan Unavailable” appears. Bluetooth mobile phone. You cannot use the Pandora application from (Appears on the screen for about 5 seconds, then Move the car to a place where you can get a better the area where you are currently trying to access returns to the previous channel): signal reception. Pandora. The selected channel is no longer available. Select The sound is interrupted or skipped while using a another channel or continue listening to the “Try again later” appears. Bluetooth audio player. previous channel. The Pandora server is under maintenance. Reduce the distance between the unit and the “SXM Ch Unsubscribed” appears. Bluetooth audio player. Disconnect the device “Station does not exist” appears. (Appears on the screen for about 5 seconds, then connected for Bluetooth phone. The selected station has been deleted by another returns to the previous channel) Turn off, then turn on the unit. device or has expired. The selected channel is not part of your current (When the sound is not yet restored) connect the “Cannot create a Station” appears. subscription plan. Call 1-866-635-2349 to subscribe. player again. You cannot create a station during the read- “SXM Subscription Updated – Press Return to The connected audio player cannot be controlled. only mode or when network connection is not Continue” appears. Check whether the connected audio player established. Your subscription has been updated. Press the supports AVRCP (Audio/Video Remote Control * Only for DDX396/DDX376BT/DDX276BT/DDX26BT. appropriate button to continue. Profile). “SXM Channel Locked” appears. The Bluetooth device does not detect the unit. SiriusXM Satellite Radio* The selected channel has been locked by the Search from the Bluetooth device again. “SXM No Signal” appears. parental controls. Enter the unlock code when you The unit does not pair with the Bluetooth device. Make sure the SiriusXM Satellite Radio antenna is are asked. For devices compatible with Bluetooth 2.1: mounted outside the car. Move the car to an area Register the device using a PIN code. (Page 34) with a clear view of the sky. “SXM Incorrect Lock Code” appears. The selected channel is a mature or parental lock For devices compatible with Bluetooth 2.0: “SXM Check Antenna” appears. channel, and locked by the parental lock or user Enter the same PIN code for both the unit and Check the SiriusXM Satellite Radio antenna lock code. Enter the correct lock code. target device. If the PIN code of the device is not connection, and make sure the antenna is firmly indicated in its instructions, try “0000” or “1234.” * Only for DDX396/DDX376BT/DDX276BT/DDX26BT. attached to the tuner. Turn off, then turn on the Bluetooth device. Check whether the SiriusXM Satellite Radio antenna cable is bent or broken. If it is damaged, replace the whole antenna unit.
ENGLISH 63
00_DDX_2019ST_KN_RN.indb 63 31/5/2018 2:44:31 PM Troubleshooting Specifications
Echo or noise occurs. “Hung Up Error” appears. Monitor section Adjust the microphone unit position. The call has not ended yet. Park your car, and use Adjust the echo volume or noise reduction volume. the connected mobile phone to end the call. Picture Size (W × H) 6.2 inches (diagonal) wide (Page 35) 137.5 mm × 77.2 mm “Pick Up Error” appears. (5-7/16" × 3-1/16") The unit does not respond when you try to copy The unit has failed to receive a call. the phone book to the unit. Display System Transparent TN LCD panel The Bluetooth connection between the Bluetooth You may have tried to copy the same entries (as Drive System TFT active matrix system device and the unit is unstable. stored) to the unit. Number of Pixels 1 152 000 Delete the unused registered Bluetooth device (800H × 480V × RGB) “Connection Error” appears. from the unit. (Page 35) The device is registered but the connection has Effective Pixels 99.99% failed. Connect the registered device. (Page 34) Pixel Arrangement RGB striped arrangement “Please Wait...” appears. Back Lighting LED The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and USB interface section turn on the unit, then connect the device again (or reset the unit). USB Standard USB 2.0 Full Speed/High Speed “No Voice Device” appears. The connected mobile phone does not have a Compatible Device Mass Storage Class voice recognition system. File System FAT 16/32 Maximum Power “No Data” appears. DC 5 V 1.5 A Supply Current No phone book data is contained in the connected Bluetooth phone. D/A Converter 24 bit Audio Decoder MP3/WMA/AAC (.aac/.m4a)/ “Initialize Error” appears. WAV/FLAC The unit has failed to initialize the Bluetooth module. Try the operation again. Video Decoder DivX*/MPEG1/MPEG2/JPEG “Dial Error” appears. * Only for DDX419BT. Dialing has failed. Try the operation again.
64 ENGLISH
04_DDX_2019ST_KNRN_Body02.indd 64 6/6/2018 9:19:16 AM Specifications
DVD player section Bluetooth section 2 Way X'Over Tweeter: Frequency (Hz): D/A Converter 24 bit Technology Bluetooth V3.0 1k/1.6k/2.5k/4k/5k/6.3k/8k/ Audio Decoder Linear PCM/Dolby Audio/ Frequency 2.402 GHz to 2.480 GHz 10k/12.5k MP3/WMA/WAV/AAC (.m4a) RF Output Power +4 dBm (MAX), Power Class 2 Gain (dB): Video Decoder DivX*/MPEG1/MPEG2/JPEG (E.I.R.P.) –8/–7/–6/–5/–4/–3/–2/–1/0 Wow & Flutter Below Measurable Limit Maximum Line of sight approx. 10 m Front/Rear (HPF): Frequency (Hz): Frequency Response 96 kHz Sampling: Communication (32.8 ft) Through/30/40/50/60/70/ 20 Hz to 22 000 Hz Range 80/90/100/120/150/180/ 48 kHz Sampling: Audio Codec SBC/AAC 220/250 20 Hz to 22 000 Hz Profile HFP (Hands Free Profile) 1.6 Slope (dB/Oct.): 44.1 kHz Sampling: A2DP (Advanced Audio −6/−12/−18/−24 20 Hz to 20 000 Hz Distribution Profile) 1.3 Gain (dB): Total Harmonic 0.010% (1 kHz) AVRCP (Audio/Video Remote –8/–7/–6/–5/–4/–3/–2/–1/0 Distortion Control Profile) 1.5 Subwoofer (LPF): Frequency (Hz): Signal to Noise Ratio 90 dB GAP (Generic Access Profile) 30/40/50/60/70/80/90/100/ PBAP (PhoneBook Access 120/150/180/220/250/ Dynamic Range 90 dB Profile) 1.2 Through Disc Format DVD-Video/VIDEO-CD/CD-DA SDP (Service Discovery Profile) Slope (dB/Oct.): Sampling Frequency 44.1 kHz/48 kHz/96 kHz SPP (Serial Port Profile) 1.2 −6/−12/−18/−24 Quantifying Bit 16 bit/20 bit/24 bit Phase: Normal/Reverse Number Gain (dB): DSP section –8/–7/–6/–5/–4/–3/–2/–1/0 * Only for DDX419BT. Equalizer Band: 13 Band Frequency (Hz) (BAND1–13): 62.5/100/160/250/400/630/ 1k/1.6k/2.5k/4k/6.3k/10k/ 16k Gain (dB): –9/−8/−7/−6/−5/−4/−3/−2/ −1/0/1/2/3/4/5/6/7/8/9 Q factor: 1.35/1.5/2.0
ENGLISH 65
00_DDX_2019ST_KN_RN.indb 65 31/5/2018 2:44:32 PM Specifications
3 Way X'Over * Position AM tuner section Tweeter (HPF): Frequency (Hz): 2 Way X'over: Front/Rear/Subwoofer Delay Frequency Range 530 kHz to 1 700 kHz (10 kHz) 1k/1.6k/2.5k/4k/5k/6.3k/8k/ 0 ft to 20 ft (0.07 ft Step) 10k/12.5k 3 Way X'over *: Tweeter/Mid Range/ Usable Sensitivity 29 dBμ Slope (dB/Oct.): Subwoofer Delay 0 ft to 20 ft (0.07 ft Step) −6/−12 Video section Phase: Normal/Reverse Gain: −8 dB to 0 dB Gain (dB): Subwoofer Level −50 dB to +10 dB Color System of NTSC/PAL –8/–7/–6/–5/–4/–3/–2/–1/0 External Video Input * Only for DDX396/DDX419BT. Mid Range (HPF): Frequency (Hz): External Video Input 1 Vp-p/75 Ω Level (mini jack) Through/30/40/50/60/70/ FM tuner section 80/90/100/120/150/180/ External Audio Max 2 V/25 kΩ 220/250 Frequency Range DDX396/DDX376BT/ Input Level (mini Slope (dB/Oct.): DDX276BT/DDX26BT: jack) −6/−12 87.9 MHz to 107.9 MHz Video Input Level for 1 Vp-p/75 Ω (200 kHz) Mid Range (LPF): Frequency (Hz): Rear Camera (RCA DDX419BT: 1k/1.6k/2.5k/4k/5k/6.3k/8k/ jack) 10k/12.5k/Through 87.5 MHz to 108.0 MHz Video Output Level 1 Vp-p/75 Ω Slope (dB/Oct.): (50 kHz) (RCA jack) −6/−12 Usable Sensitivity 7.2 dBf (0.63 μV/75 Ω) Phase: Normal/Reverse (S/N: 30 dB) Gain (dB): Quieting Sensitivity 15.2 dBf (1.58 μV/75 Ω) –8/–7/–6/–5/–4/–3/–2/–1/0 (DIN S/N: 46 dB) Subwoofer (LPF): Frequency (Hz): Frequency Response 30 Hz to 15 kHz Through/30/40/50/60/70/ (±3.0 dB) 80/90/100/120/150/180/ Signal to Noise Ratio 68 dB (MONO) 220/250 Slope (dB/Oct.): Selectivity > 80 dB (±400 kHz) −6/−12 Stereo Separation 40 dB (1 kHz) Phase: Normal/Reverse Gain (dB): –8/–7/–6/–5/–4/–3/–2/–1/0
66 ENGLISH
00_DDX_2019ST_KN_RN.indb 66 31/5/2018 2:44:32 PM Specifications
Audio section General Maximum Power 50 W × 4 Operating Voltage 12 V DC car battery (Front & Rear) Installation DDX396: Full Bandwidth 22 W × 4 (at less than 1% Dimensions With sleeve: Power (Front & Rear) THD) (W × H × D) 182 mm × 111 mm Preout Level DDX396: × 160 mm 5 V/10 kΩ (7-3/16" × 4-3/8" × 6-5/16") Without sleeve: DDX376BT: 178 mm × 100 mm × 4 V/10 kΩ 162 mm DDX276BT/DDX26BT/ (7" × 3-15/16" × 6-3/8") DDX419BT: DDX376BT/DDX276BT/ 2.5 V/10 kΩ DDX26BT/DDX419BT: Preout Impedance ≤ 600 Ω 178 mm × 100 mm × 162 mm Speaker Impedance 4 Ω to 8 Ω (7" × 3-15/16" × 6-3/8") Weight (Main Unit) DDX396: 2.0 kg (4.4 lbs) (including trim plate and sleeve) DDX376BT/DDX276BT/ DDX26BT: 1.7 kg (3.8 lbs) DDX419BT: 1.8 (4.0 lbs) (including trim plate)
Design and specifications are subject to change without notice.
ENGLISH 67
00_DDX_2019ST_KN_RN.indb 67 31/5/2018 2:44:32 PM Specifications
Trademarks and licenses • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT and/or other materials provided with the PORTFOLIO LICENSE FOR THE PERSONAL USE OF A distribution. • Dolby, Dolby Audio and the double-D symbol are CONSUMER OR OTHER USES IN WHICH IT DOES NOT – Neither the name of the Xiph.org Foundation trademarks of Dolby Laboratories. RECEIVE REMUNERATION TO nor the names of its contributors may be used to • “DVD Logo” is a trademark of DVD Format/Logo (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC endorse or promote products derived from this Licensing Corporation registered in the US, Japan STANDARD ("AVC VIDEO") AND/OR (ii) DECODE software without specific prior written permission. and other countries. AVC VIDEO THAT WAS ENCODED BY A CONSUMER THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT • The “AAC” logo is a trademark of Dolby Laboratories. ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS HOLDERS AND CONTRIBUTORS “AS IS” AND ANY • Microsoft and Windows Media are either registered OBTAINED FROM A VIDEO PROVIDER LICENSED TO EXPRESS OR IMPLIED WARRANTIES, INCLUDING, trademarks or trademarks of Microsoft Corporation in PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF the United States and/or other countries. SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL MERCHANTABILITY AND FITNESS FOR A PARTICULAR • Use of the Made for Apple badge means that an INFORMATION MAY BE OBTAINED FROM MPEG LA, PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL accessory has been designed to connect specifically L.L.C. SEE HTTP://WWW.MPEGLA.COM THE FOUNDATION OR CONTRIBUTORS BE LIABLE to the Apple product(s) identified in the badge, and • Sirius, XM and all related marks and logos are FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, has been certified by the developer to meet Apple trademarks of Sirius XM Radio Inc. All rights reserved. EXEMPLARY, OR CONSEQUENTIAL DAMAGES performance standards. Apple is not responsible for • Pandora, the Pandora logo, and the Pandora trade (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT the operation of this device or its compliance with dress are trademarks or registered trademarks of OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, safety and regulatory standards. Please note that Pandora Media, Inc., used with permission. DATA, OR PROFITS; OR BUSINESS INTERRUPTION) the use of this accessory with an Apple product may • SPOTIFY and the Spotify logo are among the HOWEVER CAUSED AND ON ANY THEORY OF affect wireless performance. registered trademarks of Spotify AB. LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, • Apple, iPhone, iPod, iPod nano, iPod touch, and • iHeartRadio® and iHeartAuto™ are trademarks owned OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) Lightning are trademarks of Apple Inc., registered in by iHeartMedia, Inc. All uses are authorized under ARISING IN ANY WAY OUT OF THE USE OF THIS the U.S. and other countries. license. SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF • This item incorporates copy protection technology • libFLAC SUCH DAMAGE. that is protected by U.S. patents and other Copyright (C) 2000-2009 Josh Coalson • DIVX intellectual property rights of Rovi Corporation. Copyright (C) 2011-2013 Xiph.Org Foundation – This DivX Certified® device can play DivX® Home Reverse engineering and disassembly are prohibited. Redistribution and use in source and binary forms, Theater video files up to 576p (including .avi, .divx). • Font for this product is designed by Ricoh . with or without modification, are permitted provided Download free software at www.divx.com to • Android is a trademark of Google LLC. that the following conditions are met: create, play and cast digital videos. • The Bluetooth® word mark and logos are registered – Redistributions of source code must retain the – DivX®, DivX Certified® and associated logos are trademarks owned by the Bluetooth SIG, Inc. and any above copyright notice, this list of conditions and trademarks of DivX, LLC and are used under license. use of such marks by JVC KENWOOD Corporation is the following disclaimer. under license. Other trademarks and trade names are – Redistributions in binary form must reproduce the those of their respective owners. above copyright notice, this list of conditions and the following disclaimer in the documentation
68 ENGLISH
00_DDX_2019ST_KN_RN.indb 68 31/5/2018 2:44:32 PM 00_DDX_2019ST_KN_RN.indb 69 31/5/2018 2:44:32 PM For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website:
00_DDX_2019ST_KN_RN.indb 1 31/5/2018 2:44:32 PM
