Wind Farm Capabilities

WIND FARM CAPABILITIES

SERVICING AUSTRALIA’S RENEWABLE ENERGY SECTOR CONCRETE PRODUCTS FOR RENEWABLE ENERGY

WIND FARM CAPABILITIES Danterr is a national concrete and construction products supply company. We source and distribute products to Australia’s largest construction projects – projects that are meeting Australia’s infrastructure, and renewable energy needs. Our sphere of influence includes no less than 15 Australian Wind Farms, plus public transport initiatives, major road upgrades, transport tunnels, sporting venues, bridges and rail lines just to name a few.

Our approach is to research and investigate the specific nature of each individual project and its requirements, and then, work with reliable local and overseas suppliers to ensure that our clients’ needs are fulfilled.

Our passion to be at the leading edge of Australian construction capabilities is also a reason why so many building and construction companies choose Danterr. We never waiver from sourcing and supplying the best of the best products, not to mention the most revolutionary.

Additionally, Danterr has a strong emphasis on sustainability and understand that the alignment of ‘greener’ outcome parameters is essential to the success of projects in an ever-evolving commercial market place regarding environmental sustainability. Danterr approaches all projects with a determination to seek the best solution, which adheres to strict building and construction requirements, and is commercially viable for the client.

Recent projects include…

03 PROJECTS

Coopers Gap Cattle Hill Granville Harbour With up to 123 turbines, Coopers Gap Construction of Goldwind Australia’s The Granville Harbour Wind Farm will be one of Australia’s largest wind 144 MW Cattle Hill Wind Farm on will comprise of 31 wind turbines farms upon its completion in 2020. the eastern shore of Lake Echo in the that will have the potential to produce southern side of the Central Plateau 112 MW of clean, renewable energy. The Coopers Gap Wind Farm will have of Tasmania, has been slated to be a capacity of 453 MW and produce finished by late-2019. This is enough kinetically generated around 1,510,000 MWh of renewable electricity to power around 46,000 energy – powering approximately Once operational, Cattle Hill Wind averaged sized Tasmanian family 264,000 average Australian homes. Farm will produce enough clean homes. Granville Harbour Wind Farm energy to power approximately will capitalise on Tasmania’s enviable Coopers Gap Wind Farm is 250 km 63,500 Tasmanian homes. wind potential whilst becoming one north-west of Brisbane near Cooranga of the corner stones in the goal of North, between Dalby and Kingaroy. Approvals have been received from Tasmania becoming 100 percent The site is located on land that’s Council, State and Commonwealth reliant on renewable energy by 2022. mainly used for cattle grazing and Regulators for the construction and other farming activities. It will connect operation of 48 wind turbine generators For this ground-breaking Tasmanian to a new Powerlink substation along and associated infrastructure. project, Danterr supplied the sacrificial the Western Downs to Halys 275 kV formwork solution Pecafil® which transmission line built by Powerlink. Danterr has supplied high strength has been successful in assisting each Pagel Grout for this massive renewable turbine to be ‘back-filled’ against which Danterr has supplied high strength energy undertaking. This tremendous allows for more stability in each Pagel Grout for this massive renewable cementitious product will achieve turbine base. energy undertaking. This tremendous 140MPa in 28 days thus ensuring cementitious product will achieve absolute stability in wind turbine bases. Led by a specialist project team, 140MPa in 28 days thus ensuring the wind farm is expected to be absolute stability in wind turbine bases. complete by mid-2020. Vestas has been appointed as the project’s primary Engineering, Procurement and Construction (EPC) Contractor.

WIND FARM CAPABILITIES 05 WIND FARM REINFORCING / FORMWORK

Concrete Rail Spacers Concrete Spacers Square / Triangle Cast concrete spacers ensure that Concrete Rail Spacers are used the specified concrete cover to the to ensure that specified concrete reinforcement for structures and cover to the reinforcement is structural elements is achieved, achieved. They come in a range both before and during concreting. of profiles; square, round, square Concrete spacers are commonly with groove and triangle. Custom- used for the walls, columns and made spacers are available. foundations in civil concreting applications.

WIND FARM CAPABILITIES Pecafil® Tie Wire Coils ‘Pecafil® is the perfect formwork Tie wire coils come in a standard solution for the in-ground diameter of 1.57mm which is the construction of pile caps and industry standard required to cover ground beams as to provide fast various civil concreting applications. and accurate formwork installation. Wire comes in a galvanized, Pecafil® is suitable for a range of stainless or black finish as to resist applications, using standard or corrosion; coils are convenient custom-manufactured elements. enough to carry yet contain enough In circular formwork applications, wire for a huge number of ties. virtually any radius can be accommodated.

Deck Rail Spacers Fibreglass Reinforcement Deck Rail Spacers are a continuous Fibreglass rebar has extensive spacer for formwork applications. strength capacity due to its form The male and female connections at and offers a maximum bond with either end will join rail on rail to any the concrete. The biggest benefit given length. Once connected, the of fibreglass reo is its high clip will not separate. Clipping bar corrosion resistance. Concrete chairs onto the reinforcement after absorbs water and therefore iron the reinforcement has been placed is reo can corrode. Fibreglass reo has now eliminated. a very low corrosion rate and will last for approx. 200 years in any concrete slab.

Lanotec Form Oil Formply A ready to use concrete release Formply is made with a radiata pine agent for formwork, precast and core with a harder density surface. tilt-up panel applications. Both hardwood surfaces are faced with a high-density resin finish, that is usually black in colour and very smooth. Formply is ideally suited for use in concrete formwork and can be constantly reused.

07 WIND FARM CONCRETE PLACEMENT

Curing Blanket Curing Compound Concrete curing blankets Danterr supplies the following effectively trap water, providing variances of Concrete Curing improved hydration and a more Compound - Aliphatic Alcohol evenly cured concrete slab. Evaporation Retardant, Bituminous, Water Based XDS, Water Based Acrylic and Wax Based.

WIND FARM CAPABILITIES Trowel Machine Concrete Vibrator Power Trowels create a level, Vibrators with a flexible shaft are smooth finish on a large, flat area built with the improved pendulum of concrete. These machines are design. Concrete vibrators are powered by genuine Honda motors suitable for use in all types of and come with a smooth pitch concrete and a wide variety of control for even finishing. They construction sites. Vibration also feature an emergency engine parameters have been optimised kill for operator safety (if handle leading to a maximum output. is released during trowelling), a lifting bar, lifting hook and a chrome guard for ease of cleaning.

Screeds Bull Floats Danterr provides lightweight Bull Floats are adjustable and aluminium screeds with an easy to controlled by twisting the handle. clean powder-coated finish. Screeds This enables the tilt of the blade to include a reversible clamped handle, accomplish the prime finish to the which essentially doubles the life of the concrete. A tilted blade on an angle screed. Internal strength support bars produces a smoother result. Raising and a rounded edge for floating are nor lowering of the handle is needed; also features as is the screed’s sharp simply twist for optimum results. edge for cutting. A built-in vial in the handle allows you to screed and level in the same stroke.

Drive Units Gumboots Portable Drive Units are used to Danterr supplied Stimela Gumboots drive / power vibration shafts and have a steel toe cap, steel midsole submersible pumps. Units are and metatarsal protection. With an fitted with either genuine Honda average weight of 2.4kg, they are GX160 or Hatz diesel engines. hard wearing and have excellent grip All units are fitted with a and sole support. three-claw coupling.

09 WIND FARM GROUT INSTALL

Pagel Grout Pagelastic Sealer Kit Danterr has exclusive access to the Pagelastic Sealer Kits are crack entire Pagel Grout High Strength bridging floor and wall coatings range including V1/30HF and V1/50. suitable for substrates of These grout products achieve a concrete, mortar and masonry. high MPa rating in 24 hours before The kit provides protection further strengthening occurs in seven against penetration of thawing- days. Pagel Grout will achieve up to salt within splashing zones. 140MPa in 28 days and is therefore the highest performing cementitious product of the 21st century.

WIND FARM CAPABILITIES Paddle Mixer and Grout Pump Grout Cubes For large size grouting jobs we Grout Cubes are available in moulds recommend using a grout pump - constructed of plastic or various either PA-BEC I,II or PA-BEC V. metals. Metal moulds are rugged and meet specific ASTM and AASHTO standards. The light-weight plastic moulds perform well with internal quality control programs.

Grout Install Service MPa Testing Danterr provide a grout installation The MPa of new concrete / high expert when sites are pouring strength grout is determined grout. Our experts have decades of using a cylinder-testing process. experience regarding high strength Danterr have the capacity to bore grout and Wind Turbines. cylinders after the surface has dried, or cured, for select periods up to 28 days. The cylinders must be transported carefully to testing labs, where they are placed on testing machines.

Bunded Pallets Curing Compound Bunded pallets can support 4x 205 Danterr supplies the following litre drums and are engineered to variances of Concrete Curing contain spillage of most materials. Compound - Aliphatic Alcohol Bunded pallets come with a formed Evaporation Retardant, Bituminous, internal draining floor with a holding Water Based XDS, Water Based capacity of 240 litres of spilled liquid. Acrylic and Wax Based. A galvanized structural platform provides stability. All pallets have a 50mm threaded drain plug for easy drainage.

11 T: 1800 262 383 E: [email protected] www.danterr.com