This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store.

Listed below are all approved and published ISO standards as of 9/6/2019. All ISO documents are available in electronic format (PDF) via ANSI's Electronic Standards Store (ESS) at http://webstore.ansi.org.

CIE IIW

ISO 11664-2:2007 ISO 14270:2016 Colorimetry - Part 2: CIE standard illuminants Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized ISO 15469:2004 peel testing resistance spot, seam and embossed Spatial distribution of daylight - CIE standard general projection welds sky ISO 14271:2017 ISO 16508:1999 Resistance welding - Vickers hardness testing (low- Road traffic lights - Photometric properties of 200 mm force and microhardness) of resistance spot, projection, roundel signals and seam welds ISO 23539:2005 ISO 14272:2016 Photometry - The CIE system of physical photometry Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension ISO 23603:2005 testing of resistance spot and embossed projection Standard method of assessing the spectral quality of welds daylight simulators for visual appraisal and measurement of colour ISO 14273:2016 Resistance welding - Destructive testing of welds - ISO/CIE 11664-1:2019 Specimen dimensions and procedure for tensile shear Colorimetry - Part 1: CIE standard colorimetric testing resistance spot and embossed projection welds observers ISO 14324:2003 ISO/CIE 11664-3:2019 Resistance spot welding - Destructive tests of welds - Colorimetry - Part 3: CIE tristimulus values Method for the fatigue testing of spot welded joints ISO/CIE 11664-4:2019 ISO 14329:2003 Colorimetry - Part 4: CIE 1976 L*a*b* colour space Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, ISO/CIE 11664-5:2016 seam and projection welds Colorimetry - Part 5: CIE 1976 L*u*v* colour space and u, v uniform chromaticity scale diagram ISO 14346:2013 Static design procedure for welded hollow-section joints ISO/CIE 11664-6:2014 - Recommendations Colorimetry - Part 6: CIEDE2000 Colour-difference formula ISO 14347:2008 Fatigue - Design procedure for welded hollow-section ISO/CIE 17166:2019 joints - Recommendations Erythema reference action spectrum and standard erythema dose ISO 16432:2006 Resistance welding - Procedure for projection welding of ISO/CIE 19476:2014 uncoated and coated low carbon steels using embossed Characterization of the performance of illuminance projection(s) meters and luminance meters ISO 16433:2006 ISO/CIE 28077:2016 Resistance welding - Procedure for seam welding of Photocarcinogenesis action spectrum (non-melanoma uncoated and coated low carbon steels skin cancers) ISO 18211:2016 Non-destructive testing - Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation ISO 18785-1:2018 Friction stir spot welding - Aluminium - Part 1: Vocabulary 1 ISO 18785-2:2018 ISO/TR 13393:2009 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Friction stir spot welding - Aluminium - Part 2: Design of Welding consumables - Hardfacing classification - weld joints Microstructures ISO 18785-3:2018 ISO/TR 14345:2012 Friction stir spot welding - Aluminium - Part 3: Fatigue - Fatigue testing of welded components - Qualification of welding personnel Guidance ISO 18785-4:2018 ISO/TR 18786:2014 Friction stir spot welding - Aluminium - Part 4: Health and safety in welding - Guidelines for risk Specification and qualification of welding procedures assessment of welding fabrication activities ISO 18785-5:2018 ISO/TR 22281:2018 Friction stir spot welding - Aluminium - Part 5: Quality Welding consumables - International Institute of Welding and inspection requirements (IIW) position statement on the use of trace element analyses in welding consumable specifications ISO 19675:2017 Non-destructive testing - Ultrasonic testing - ISO/TR 22824:2003 Specification for a calibration block for phased array Welding consumables - Predicted and measured FN in testing (PAUT) specifications - A position statement of the experts of IIW Commission IX ISO 24497-1:2007 Non-destructive testing - Metal magnetic memory - Part ISO/TS 20273:2017 1: Vocabulary Guidelines on weld quality in relationship to fatigue strength ISO 24497-2:2007 Non-destructive testing - Metal magnetic memory - Part ISO/CASCO 2: General requirements ISO 24497-3:2007 ISO 17034:2016 Non-destructive testing - Metal magnetic memory - Part General requirements for the competence of reference 3: Inspection of welded joints material producers ISO 25239-1:2011 ISO Guide 27:1983 Friction stir welding - Aluminium - Part 1: Vocabulary Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of ISO 25239-2:2011 conformity Friction stir welding - Aluminium - Part 2: Design of weld joints ISO/IEC 17000:2004 Conformity assessment - Vocabulary and general ISO 25239-3:2011 principles Friction stir welding - Aluminium - Part 3: Qualification of welding operators ISO/IEC 17007:2009 Conformity assessment - Guidance for drafting ISO 25239-4:2011 normative documents suitable for use for conformity Friction stir welding - Aluminium - Part 4: Specification assessment and qualification of welding procedures ISO/IEC 17011:2017 ISO 25239-5:2011 Conformity assessment - Requirements for accreditation Friction stir welding - Aluminium - Part 5: Quality and bodies accrediting conformity assessment bodies inspection requirements ISO/IEC 17020:2012 ISO 3690:2018 Conformity assessment - Requirements for the Welding and allied processes - Determination of operation of various types of bodies performing hydrogen content in arc weld metal inspection ISO 6847:2013 ISO/IEC 17021-1:2015 Welding consumables - Deposition of a weld metal pad Conformity assessment - Requirements for bodies for chemical analysis providing audit and certification of management systems - Part 1: Requirements ISO 8249:2018 Welding - Determination of Ferrite Number (FN) in ISO/IEC 17021-2:2016 austenitic and duplex ferritic-austenitic Cr-Ni stainless Conformity assessment - Requirements for bodies steel weld metals providing audit and certification of management systems - Part 2: Competence requirements for auditing and ISO/TR 13392:2014 certification of environmental management systems Health and safety in welding and allied processes - Arc welding fume components

2 ISO/IEC 17021-3:2017 ISO/IEC TS 17021-10:2018 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Conformity assessment - Requirements for bodies Conformity assessment - Requirements for bodies providing audit and certification of management systems providing audit and certification of management systems - Part 3: Competence requirements for auditing and - Part 10: Competence requirements for auditing and certification of quality management systems certification of occupational health and safety management systems ISO/IEC 17024:2012 Conformity assessment - General requirements for ISO/IEC TS 17021-11:2018 bodies operating certification of persons Conformity assessment - Requirements for bodies providing audit and certification of management systems ISO/IEC 17025:2017 - Part 11: Competence requirements for auditing and General requirements for the competence of testing and certification of facility management (FM) management calibration laboratories systems ISO/IEC 17030:2003 ISO/IEC TS 17021-4:2013 Conformity assessment - General requirements for Conformity assessment - Requirements for bodies third-party marks of conformity providing audit and certification of management systems - Part 4: Competence requirements for auditing and ISO/IEC 17040:2005 certification of event sustainability management systems Conformity assessment - General requirements for peer assessment of conformity assessment bodies and ISO/IEC TS 17021-5:2014 accreditation bodies Conformity assessment - Requirements for bodies providing audit and certification of management systems ISO/IEC 17043:2010 - Part 5: Competence requirements for auditing and Conformity assessment - General requirements for certification of asset management systems proficiency testing ISO/IEC TS 17021-6:2014 ISO/IEC 17050-1:2004 Conformity assessment - Requirements for bodies Conformity assessment - Suppliers declaration of providing audit and certification of management systems conformity - Part 1: General requirements - Part 6: Competence requirements for auditing and certification of business continuity management systems ISO/IEC 17050-2:2004 Conformity assessment - Suppliers declaration of ISO/IEC TS 17021-7:2014 conformity - Part 2: Supporting documentation Conformity assessment - Requirements for bodies providing audit and certification of management systems ISO/IEC 17065:2012 - Part 7: Competence requirements for auditing and Conformity assessment - Requirements for bodies certification of road traffic safety management systems certifying products, processes and services ISO/IEC TS 17021-8:2019 ISO/IEC 17067:2013 Conformity assessment - Requirements for bodies Conformity assessment - Fundamentals of product providing audit and certification of management systems certification and guidelines for product certification - Part 8: Competence requirements for auditing and schemes certification of management systems for sustainable development in communities ISO/IEC Guide 23:1982 Methods of indicating conformity with standards for ISO/IEC TS 17021-9:2016 third-party certification systems Conformity assessment - Requirements for bodies providing audit and certification of management systems ISO/IEC Guide 60:2004 - Part 9: Competence requirements for auditing and Conformity assessment - Code of good practice certification of anti-bribery management systems ISO/IEC Guide 68:2002 ISO/IEC TS 17023:2013 Arrangements for the recognition and acceptance of Conformity assessment - Guidelines for determining the conformity assessment results duration of management system certification audits ISO/IEC TR 17026:2015 ISO/IEC TS 17027:2014 Conformity assessment - Example of a certification Conformity assessment - Vocabulary related to scheme for tangible products competence of persons used for certification of persons ISO/IEC TR 17028:2017 ISO/TS 17033:2019 Conformity assessment - Guidelines and examples of a Ethical claims and supporting information - Principles certification scheme for services and requirements

3 ISO 2775:1977 ISO/COPOLCOThis is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Office machines and printing machines used for information processing - Widths of one-time paper or ISO/IEC Guide 14:2018 plastic printing ribbons and marking to indicate the end Products and related services - Information for of the ribbons consumers ISO 2784:1974 ISO/IEC Guide 37:2012 Continuous forms used for information processing - Instructions for use of products by consumers Sizes and sprocket feed holes ISO/IEC Guide 41:2018 ISO 3540:1976 Packaging - Recommendations for addressing Paper or plastic printing ribbons - Characteristics of consumer needs cores ISO/IEC Guide 46:2017 ISO 3791:1976 Comparative testing of consumer products and related Office machines and data processing equipment - services - General principles Keyboard layouts for numeric applications ISO/IEC Guide 50:2014 ISO 3792:1976 Safety aspects - Guidelines for child safety in standards Adding machines - Layout of function keyboard and other specifications ISO 3802:1976 ISO/IEC Guide 51:2014 Information processing - General purpose reels with 8 Safety aspects - Guidelines for their inclusion in mm (5/16 in) centre hole for magnetic tape for standards interchange instrumentation applications ISO/IEC Guide 74:2004 ISO 3866:1977 Graphical symbols - Technical guidelines for the Office machines and printing machines used for consideration of consumers needs information processing - Widths of fabric printing ribbons on spools exceeding 19 mm ISO/IEC Guide 76:2008 Development of service standards - Recommendations ISO 3883:1977 for addressing consumer issues Office machines - Line and character capacity of address masters ISO/IEC JTC 1 ISO 4341:1978 ISO 1538:1984 Information processing - Magnetic tape cassette and cartridge labelling and file structure for information Programming languages - ALGOL 60 interchange ISO 1730:1980 ISO 4882:1979 Dictation equipment - Basic operating requirements Office machines and data processing equipment - Line ISO 1858:1977 spacings and character spacings Information processing - General purpose hubs and ISO 6068:1985 reels, with 76 mm (3 in) centrehole, for magnetic tape Information processing - Recording characteristics of used in interchange instrumentation applications instrumentation magnetic tape (including telemetry ISO 1859:1973 systems) - Interchange requirements Information processing - Unrecorded magnetic tapes for ISO 6093:1985 interchange instrumentation applications - General Information processing - Representation of numerical dimensional requirements values in character strings for information interchange ISO 1860:1986 ISO 7297:1985 Information processing - Precision reels for magnetic Information processing - Magnetic disk for data storage tape used in interchange instrumentation applications devices - 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter ISO 2257:1980 Office machines and printing machines used for ISO 7298:1985 information processing - Widths of fabric printing ribbons Information processing - Magnetic disk for data storage on spools devices - 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter ISO 2258:1976 Printing ribbons - Minimum markings to appear on ISO 7487-3:1986/Cor 1:1991 containers Corrigendum

4 ISO 7498-2:1989 ISO 8571-4:1988/Amd 2:1993 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information processing systems - Open Systems - Amendment 2: Overlapped access Interconnection - Basic Reference Model - Part 2: Security Architecture ISO 8571-4:1988/Amd 4:1992 - Amendment 4 ISO 7665:1983 Information processing - File structure and labelling of ISO 8571-4:1988/Amd 4:1992/Cor 1:1995 flexible disk cartridges for information interchange Corrigendum ISO 7929:1985 ISO 8571-4:1988/Cor 1:1992 Information processing - Magnetic disk for data storage Corrigendum devices - 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter ISO 8630-3:1987/Cor 1:1992 Corrigendum ISO 8571-1:1988 Information processing systems - Open Systems ISO 8860-1:1987/Cor 1:1990 Interconnection - File Transfer, Access and Corrigendum Management - Part 1: General introduction ISO 8860-2:1987/Cor 1:1990 ISO 8571-1:1988/Amd 1:1992 Corrigendum - Amendment 1: Filestore Management ISO/IEC 10026-1:1998 ISO 8571-1:1988/Amd 2:1993 - Open Systems Interconnection - Amendment 2: Overlapped access - Distributed Transaction Processing - Part 1: OSI TP Model ISO 8571-1:1988/Cor 1:1991 Corrigendum ISO/IEC 10026-2:1998 Information technology - Open Systems Interconnection ISO 8571-2:1988 - Distributed Transaction Processing - Part 2: OSI TP Information processing systems - Open Systems Service Interconnection - File Transfer, Access and Management - Part 2: Virtual Filestore Definition ISO/IEC 10026-3:1998 Information technology - Open Systems Interconnection ISO 8571-2:1988/Amd 1:1992 - Distributed Transaction Processing - Part 3: Protocol - Amendment 1: Filestore Management specification ISO 8571-2:1988/Amd 2:1993 ISO/IEC 10026-4:1995 - Amendment 2: Overlapped access Information technology - Open Systems Interconnection - Distributed Transaction Processing: Protocol ISO 8571-2:1988/Cor 1:1991 Implementation Conformance Statement (PICS) Corrigendum proforma ISO 8571-3:1988 ISO/IEC 10026-5:1998 Information processing systems - Open Systems Information technology - Open Systems Interconnection Interconnection - File Transfer, Access and - Distributed Transaction Processing - Part 5: Management - Part 3: File Service Definition Application context proforma and guidelines when using OSI TP ISO 8571-3:1988/Amd 1:1992 - Amendment 1: Filestore Management ISO/IEC 10026-6:1995 Information technology - Open Systems Interconnection ISO 8571-3:1988/Amd 2:1993 - Distributed Transaction Processing - Part 6: - Amendment 2: Overlapped access Unstructured Data Transfer ISO 8571-3:1988/Cor 1:1991 ISO/IEC 10035-2:1995 Corrigendum Information technology - Open Systems Interconnection - Connectionless protocol for the Association Control ISO 8571-3:1988/Cor 2:1992 Service Element: Protocol Implementation Conformance Corrigendum Statement (PICS) proforma ISO 8571-4:1988 ISO/IEC 10040:1998 Information processing systems - Open Systems Information technology - Open Systems Interconnection Interconnection - File Transfer, Access and - Systems management overview Management - Part 4: File Protocol Specification ISO/IEC 10164-1:1993 ISO 8571-4:1988/Amd 1:1992 Information technology - Open Systems Interconnection - Amendment 1: Filestore Management - Systems Management: Object Management Function

5 ISO/IEC 10164-1:1993/Amd 1:1996 ISO/IEC 10164-14:1996/Cor 2:2002 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. - Amendment 1: Implementation conformance Corrigendum statement proformas ISO/IEC 10164-14:1996/Cor 3:2002 ISO/IEC 10164-1:1993/Amd 1:1996/Cor 1:1996 Corrigendum Corrigendum ISO/IEC 10164-15:2002 ISO/IEC 10164-10:1995 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Systems management: Scheduling function - Systems Management: Usage metering function for accounting purposes ISO/IEC 10164-16:1997 Information technology - Open Systems Interconnection ISO/IEC 10164-10:1995/Amd 1:1998 - Systems Management: Management knowledge - Amendment 1: Implementation conformance management function statement proformas ISO/IEC 10164-16:1997/Amd 1:1998 ISO/IEC 10164-10:1995/Cor 1:1999 - Amendment 1: Extension for General Relationship Corrigendum Model ISO/IEC 10164-10:1995/Cor 2:2002 ISO/IEC 10164-16:1997/Cor 1:2002 Corrigendum Corrigendum ISO/IEC 10164-11:1994 ISO/IEC 10164-17:1996 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Systems Management: Metric objects and attributes - Systems Management: Change over function ISO/IEC 10164-11:1994/Amd 1:1998 ISO/IEC 10164-17:1996/Cor 1:1999 - Amendment 1: Implementation conformance Corrigendum statement proformas ISO/IEC 10164-17:1996/Cor 2:2002 ISO/IEC 10164-11:1994/Cor 1:1999 Corrigendum Corrigendum ISO/IEC 10164-18:1997 ISO/IEC 10164-12:1994 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Systems Management: Software management function - Systems Management: Test Management Function ISO/IEC 10164-18:1997/Cor 1:1999 ISO/IEC 10164-12:1994/Cor 1:1998 Corrigendum Corrigendum ISO/IEC 10164-18:1997/Cor 2:2002 ISO/IEC 10164-12:1994/Cor 2:1999 Corrigendum Corrigendum ISO/IEC 10164-18:1997/Cor 3:2002 ISO/IEC 10164-12:1994/Cor 3:2002 Corrigendum Corrigendum ISO/IEC 10164-19:1998 ISO/IEC 10164-13:1995 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Systems Management: Management domain and - Systems Management: Summarization Function management policy management function ISO/IEC 10164-13:1995/Amd 1:1997 ISO/IEC 10164-2:1993 - Amendment 1: Implementation conformance Information technology - Open Systems Interconnection statement proformas - Systems Management: State Management Function ISO/IEC 10164-13:1995/Cor 1:1999 ISO/IEC 10164-2:1993/Amd 1:1996 Corrigendum - Amendment 1: Implementation conformance statement proformas ISO/IEC 10164-13:1995/Cor 2:2002 Corrigendum ISO/IEC 10164-2:1993/Amd 1:1996/Cor 1:1996 Corrigendum ISO/IEC 10164-14:1996 Information technology - Open Systems Interconnection ISO/IEC 10164-2:1993/Amd 2:2002 - Systems Management: Confidence and diagnostic test - Amendment 2: Amendment to support lifecycle state categories ISO/IEC 10164-2:1993/Cor 1:1996 ISO/IEC 10164-14:1996/Cor 1:1999 Corrigendum Corrigendum

6 ISO/IEC 10164-2:1993/Cor 2:2002 ISO/IEC 10164-6:1993 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Corrigendum Information technology - Open Systems Interconnection - Systems Management: Log control function ISO/IEC 10164-20:1999 Information technology - Open Systems Interconnection ISO/IEC 10164-6:1993/Amd 1:1996 - Systems Management: Time management function - Amendment 1: Implementation conformance statement proformas ISO/IEC 10164-20:1999/Cor 1:2002 Corrigendum ISO/IEC 10164-6:1993/Amd 1:1996/Cor 1:1996 Corrigendum ISO/IEC 10164-21:1998 Information technology - Open Systems Interconnection ISO/IEC 10164-6:1993/Cor 1:2003 - Systems Management: Command sequencer for Corrigendum Systems Managenment ISO/IEC 10164-7:1992 ISO/IEC 10164-22:2000 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Systems Management: Security alarm reporting - Systems Management: Response time monitoring function function ISO/IEC 10164-7:1992/Amd 1:1995 ISO/IEC 10164-3:1993 - Amendment 1: Implementation conformance Information technology - Open Systems Interconnection statement proformas - Systems Management: Attributes for representing relationships ISO/IEC 10164-7:1992/Amd 1:1995/Cor 1:1996 Corrigendum ISO/IEC 10164-3:1993/Amd 1:1996 - Amendment 1: Implementation conformance ISO/IEC 10164-8:1993 statement proformas Information technology - Open Systems Interconnection - Systems Management: Security audit trail function ISO/IEC 10164-3:1993/Amd 1:1996/Cor 1:1996 Corrigendum ISO/IEC 10164-8:1993/Cor 1:1995 Corrigendum ISO/IEC 10164-4:1992 Information technology - Open Systems Interconnection ISO/IEC 10164-8:1993/Cor 2:1996 - Systems Management: Alarm reporting function Corrigendum ISO/IEC 10164-4:1992/Amd 1:1995 ISO/IEC 10164-8:1993/Cor 3:1999 - Amendment 1: Implementation conformance Corrigendum statement proformas ISO/IEC 10164-9:1995 ISO/IEC 10164-4:1992/Amd 1:1995/Cor 1:1996 Information technology - Open Systems Interconnection Corrigendum - Systems Management: Objects and attributes for access control ISO/IEC 10164-4:1992/Cor 1:1994 Corrigendum ISO/IEC 10164-9:1995/Cor 1:1996 Corrigendum ISO/IEC 10164-4:1992/Cor 2:1999 Corrigendum ISO/IEC 10164-9:1995/Cor 2:1999 Corrigendum ISO/IEC 10164-5:1993 Information technology - Open Systems Interconnection ISO/IEC 10164-9:1995/Cor 3:2002 - Systems management: Event Report Management Corrigendum Function ISO/IEC 10165-1:1993 ISO/IEC 10164-5:1993/Amd 1:1995 Information technology - Open Systems Interconnection - Amendment 1: Implementation conformance - Management Information Services - Structure of statement proformas management information: Management Information Model ISO/IEC 10164-5:1993/Amd 1:1995/Cor 1:1996 Corrigendum ISO/IEC 10165-1:1993/Amd 1:1996 - Amendment 1: Generalization of Terms ISO/IEC 10164-5:1993/Cor 1:1994 Corrigendum ISO/IEC 10165-1:1993/Cor 1:1994 Corrigendum ISO/IEC 10164-5:1993/Cor 2:1999 Corrigendum

7 ISO/IEC 10165-2:1992 ISO/IEC 10181-1:1996 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Structure of management information: Definition of - Security frameworks for open systems: Overview management information ISO/IEC 10181-2:1996 ISO/IEC 10165-2:1992/Cor 1:1994 Information technology - Open Systems Interconnection Corrigendum - Security frameworks for open systems: framework ISO/IEC 10165-2:1992/Cor 2:1996 Corrigendum ISO/IEC 10181-3:1996 Information technology - Open Systems Interconnection ISO/IEC 10165-2:1992/Cor 3:1999 - Security frameworks for open systems: Access control Corrigendum framework ISO/IEC 10165-4:1992 ISO/IEC 10181-4:1997 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Structure of management information - Part 4: - Security frameworks for open systems: Non- Guidelines for the definition of managed objects repudiation framework ISO/IEC 10165-4:1992/Amd 1:1996 ISO/IEC 10181-5:1996 - Amendment 1: Set by Create and Component Information technology - Open Systems Interconnection Registration - Security frameworks for open systems: Confidentiality framework ISO/IEC 10165-4:1992/Amd 2:1998 - Amendment 2: Addition of the NO-MODIFY syntax ISO/IEC 10181-6:1996 element and guideline extensions Information technology - Open Systems Interconnection - Security frameworks for open systems: Integrity ISO/IEC 10165-4:1992/Amd 3:1998 framework - Amendment 3: Guidelines for the use of Z in formalizing the behaviour of managed objects ISO/IEC 10181-7:1996 Information technology - Open Systems Interconnection ISO/IEC 10165-4:1992/Cor 1:1996 - Security frameworks for open systems: Security audit Corrigendum and alarms framework ISO/IEC 10165-4:1992/Cor 2:2003 ISO/IEC 10731:1994 Corrigendum Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition ISO/IEC 10165-5:1994 of OSI services Information technology - Open Systems Interconnection - Structure of management information: Generic ISO/IEC 10745:1995 management information Information technology - Open Systems Interconnection - Upper layers security model ISO/IEC 10165-5:1994/Cor 1:1998 Corrigendum ISO/IEC 11578:1996 Information technology - Open Systems Interconnection ISO/IEC 10165-5:1994/Cor 2:2002 - Remote Procedure Call (RPC) Corrigendum ISO/IEC 11586-1:1996 ISO/IEC 10165-6:1997 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Generic upper layers security: Overview, models and - Structure of management information: Requirements notation and guidelines for implementation conformance statement proformas associated with OSI management ISO/IEC 11586-2:1996 Information technology - Open Systems Interconnection ISO/IEC 10165-7:1996 - Generic upper layers security: Security Exchange Information technology - Open Systems Interconnection Service Element (SESE) service definition - Structure of management information: General relationship model ISO/IEC 11586-3:1996 Information technology - Open Systems Interconnection ISO/IEC 10165-8:2000 - Generic upper layers security: Security Exchange Information technology - Open Systems Interconnection Service Element (SESE) protocol specification - Structure of management information: Managed objects for supporting upper layers ISO/IEC 11586-4:1996 Information technology - Open Systems Interconnection ISO/IEC 10165-9:2000 - Generic upper layers security: Protecting transfer Information technology - Open Systems Interconnection syntax specification - Structure of management information: Systems management application layer managed objects

8 ISO/IEC 11586-5:1997 ISO/IEC 13346-1:1995 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - Open Systems Interconnection Information technology - Volume and file structure of - Generic upper layers security: Security Exchange write-once and rewritable media using non-sequential Service Element (SESE) Protocol Implementation recording for information interchange - Part 1: General Conformance Statement (PICS) proforma ISO/IEC 13346-2:1999 ISO/IEC 11586-6:1997 Information technology - Volume and file structure of Information technology - Open Systems Interconnection write-once and rewritable media using non-sequential - Generic upper layers security: Protecting transfer recording for information interchange - Part 2: Volume syntax Protocol Implementation Conformance and boot block recognition Statement (PICS) proforma ISO/IEC 13346-3:1999 ISO/IEC 11587:1996 Information technology - Volume and file structure of Information technology - Open Systems Interconnection write-once and rewritable media using non-sequential - Application Context for Systems Management with recording for information interchange - Part 3: Volume Transaction Processing structure ISO/IEC 11889-1:2009 ISO/IEC 13346-4:1999 Information technology - - Part Information technology - Volume and file structure of 1: Overview write-once and rewritable media using non-sequential recording for information interchange - Part 4: File ISO/IEC 11889-1:2015 structure Information technology - Trusted platform module library - Part 1: Architecture ISO/IEC 13346-5:1995 Information technology - Volume and file structure of ISO/IEC 11889-2:2009 write-once and rewritable media using non-sequential Information technology - Trusted Platform Module - Part recording for information interchange - Part 5: Record 2: Design principles structure ISO/IEC 11889-2:2015 ISO/IEC 13490-1:1995 Information technology - Trusted Platform Module Information technology - Volume and file structure of Library - Part 2: Structures read-only and write-once compact disk media for information interchange - Part 1: General ISO/IEC 11889-3:2009 Information technology - Trusted Platform Module - Part ISO/IEC 13490-2:1995 3: Structures Information technology - Volume and file structure of read-only and write-once compact disk media for ISO/IEC 11889-3:2015 information interchange - Part 2: Volume and file Information technology - Trusted Platform Module structure Library - Part 3: Commands ISO/IEC 13712-1:1995 ISO/IEC 11889-4:2009 Information technology - Remote Operations: Concepts, Information technology - Trusted Platform Module - Part model and notation 4: Commands ISO/IEC 13712-1:1995/Amd 1:1996 ISO/IEC 11889-4:2015 - Amendment 1: Built-in operations Information technology - Trusted Platform Module Library - Part 4: Supporting Routines ISO/IEC 13712-1:1995/Cor 1:1996 Corrigendum ISO/IEC 12034-1:2017 Information technology - Archive eXchange Format ISO/IEC 13712-2:1995 (AXF) - Part 1: Structure and semantics Information technology - Remote Operations: OSI realizations - Remote Operations Service Element ISO/IEC 12139-1:2009 (ROSE) service definition Information technology - Telecommunications and information exchange between systems - Powerline ISO/IEC 13712-2:1995/Amd 1:1996 communication (PLC) - High speed PLC medium - Amendment 1: Mapping to A-UNIT-DATA and built-in access control (MAC) and physical layer (PHY) - Part 1: operations General requirements ISO/IEC 13712-3:1995 ISO/IEC 13244:1998 Information technology - Remote Operations: OSI Information technology - Open Distributed Management realizations - Remote Operations Service Element Architecture (ROSE) protocol specification ISO/IEC 13244:1998/Amd 1:1999 ISO/IEC 13712-3:1995/Amd 1:1996 - Amendment 1: Support using Common Object - Amendment 1: Mapping to A-UNIT-DATA and built-in Request Broker Architecture (CORBA) operations

9 ISO/IEC 13712-3:1995/Cor 1:1996 ISO/IEC 17341:2009 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Corrigendum Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: ISO/IEC 13714:1995 4,7 Gbytes and 1,46 Gbytes per side (recording speed Information technology - Document processing and up to 4X) related communication - User interface to telephone- based services - Voice messaging applications ISO/IEC 17344:2009 Information technology - Data interchange on 120 mm ISO/IEC 13800:1996 and 80 mm optical disk using +R format - Capacity: 4,7 Information technology - Procedure for the registration Gbytes and 1,46 Gbytes per side (recording speed up to of identifiers and attributes for volume and file structure 16X) ISO/IEC 14476-4:2010 ISO/IEC 17826:2016 Information technology - Enhanced communications Information technology - Cloud Data Management transport protocol: Specification of QoS management for Interface (CDMI) duplex multicast transport ISO/IEC 17998:2012 ISO/IEC 14476-6:2010 Information technology - SOA Governance Framework Information technology - Enhanced communications transport protocol: Specification of QoS management for ISO/IEC 18026:2009 n-plex multicast transport Information technology - Spatial Reference Model (SRM) ISO/IEC 14496-1:2010 Information technology - Coding of audio-visual objects - ISO/IEC 18180:2013 Part 1: Systems Information technology - Specification for the Extensible Configuration Checklist Description Format (XCCDF) ISO/IEC 14662:2010 Version 1.2 Information technology - Open-edi reference model ISO/IEC 19099:2014 ISO/IEC 14834:1996 Information technology - Virtualization Management Information technology - Distributed Transaction Specification Processing - The XA Specification ISO/IEC 19464:2014 ISO/IEC 14863:1996 Information technology - Advanced Message Queuing Information technology - System-Independent Data Protocol (AMQP) v1.0 specification Format (SIDF) ISO/IEC 19507:2012 ISO/IEC 15944-1:2011 Information technology - Object Management Group Information technology - Business operational view - Object Constraint Language (OCL) Part 1: Operational aspects of open-edi for implementation ISO/IEC 19508:2014 Information technology - Object Management Group ISO/IEC 15953:1999 Meta Object Facility (MOF) Core Information technology - Open Systems Interconnection - Service definition for the Application Service Object ISO/IEC 19509:2014 Association Control Service Element Information technology - Object Management Group XML Metadata Interchange (XMI) ISO/IEC 15954:1999 Information technology - Open Systems Interconnection ISO/IEC 19510:2013 - Connection-mode protocol for the Application Service Information technology - Object Management Group Object Association Control Service Element Business Process Model and Notation ISO/IEC 15955:1999 ISO/IEC 19513:2017 Information technology - Open Systems Interconnection Information technology - Object Management Group - Connectionless protocol for the Application Service Unified Profile for DoDAF and MODAF (UPDM), 2.1.1 Object Association Control Service Element ISO/IEC 19514:2017 ISO/IEC 16512-1:2016 Information technology - Object management group Information technology - Relayed Multicast Control systems modeling language (OMG SysML) Protocol (RMCP) - Framework ISO/IEC 19515:2019 ISO/IEC 16512-2:2016 Information technology - Object Management Group Information technology - Relayed multicast protocol: Automated Function Points (AFP), 1.0 Specification for simplex group applications ISO/IEC 19678:2015 ISO/IEC 16680:2012 Information Technology - BIOS Protection Guidelines Information technology - The Open Group Service Integration Maturity Model (OSIMM)

10 ISO/IEC 19831:2015 ISO/IEC 22275:2018 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Cloud Infrastructure Management Interface (CIMI) Information technology - Programming languages, their Model and RESTful HTTP-based Protocol - An Interface environments, and system software interfaces - for Managing Cloud Infrastructure ECMAScript® Specification Suite ISO/IEC 19845:2015 ISO/IEC 23681:2019 Information technology - Universal business language Information technology - Self-contained Information version 2.1 (UBL v2.1) Retention Format (SIRF) Specification ISO/IEC 19987:2017 ISO/IEC 2382:2015 Information technology - EPC Information Services Information technology - Vocabulary (EPCIS) Standard ISO/IEC 24570:2018 ISO/IEC 19988:2017 Software engineering - NESMA functional size Information technology - Core Business Vocabulary measurement method - Definitions and counting Standard guidelines for the application of function point analysis ISO/IEC 20243-1:2018 ISO/IEC 25185-1:2016 Information technology - Open Trusted Technology Identification cards - card ProviderTM Standard (O-TTPS) - Mitigating maliciously authentication protocols - Part 1: Protocol for tainted and counterfeit products - Part 1: Requirements Lightweight Authentication of Identity and recommendations ISO/IEC 26925:2009 ISO/IEC 20243-2:2018 Information technology - Data interchange on 120 mm Information technology - Open Trusted Technology and 80 mm optical disk using +RW HS format - ProviderTM Standard (O-TTPS) - Mitigating maliciously Capacity: 4,7 Gbytes and 1,46 Gbytes per side tainted and counterfeit products - Part 2: Assessment (recording speed 8X) procedures for the O-TTPS and ISO/IEC 20243-1:2018 ISO/IEC 29124:2010 ISO/IEC 20648:2016 Information technology - Programming languages, their Information technology - TLS specification for storage environments and system software interfaces - systems Extensions to the ++ Library to support mathematical special functions ISO/IEC 20802-1:2016 Information technology - (OData) ISO/IEC 29341-1-1:2011 v4.0 - Part 1: Core Information technology - UPnP Device Architecture - Part 1-1: UPnP Device Architecture Version 1.1 ISO/IEC 20802-2:2016 Information technology - Open data protocol (OData) ISO/IEC 29341-1-2:2017 v4.0 - Part 2: OData JSON Format Information technology - UPnP Device Architecture - Part 1-2: UPnP Device Architecture Version 2.0 ISO/IEC 20919:2016 Information technology - Linear Tape File System ISO/IEC 29341-1:2011 (LTFS) Format Specification Information technology - UPnP Device Architecture - Part 1: UPnP Device Architecture Version 1.0 ISO/IEC 20922:2016 Information technology - Message Queuing Telemetry ISO/IEC 29341-10-1:2008 Transport (MQTT) v3.1.1 Information technology - UPnP Device Architecture - Part 10-1: Quality of Service Device Control Protocol - ISO/IEC 20933:2019 Quality of Service Architecture Information technology - Distributed application platforms and services (DAPS) - Framework for ISO/IEC 29341-10-10:2008 distributed real-time access systems Information technology - UPnP Device Architecture - Part 10-10: Quality of Service Device Control Protocol - ISO/IEC 21964-1:2018 Quality of Service Device Service Information technology - Destruction of data carriers - Part 1: Principles and definitions ISO/IEC 29341-10-11:2008 Information technology - UPnP Device Architecture - ISO/IEC 21964-2:2018 Part 10-11: Quality of Service Device Control Protocol - Information technology - Destruction of data carriers - Quality of Service Manager Service Part 2: Requirements for equipment for destruction of data carriers ISO/IEC 29341-10-12:2008 Information technology - UPnP Device Architecture - ISO/IEC 21964-3:2018 Part 10-12: Quality of Service Device Control Protocol - Information technology - Destruction of data carriers - Quality of Service Policy Holder Service Part 3: Process of destruction of data carriers

11 ISO/IEC 29341-11-1:2008 ISO/IEC 29341-15-10:2011 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 11-1: Quality of Service Device Control Protocol - Part 15-10: Content Synchronization Device Control Level 2 - Quality of Service Architecture Protocol - Content Synchronization Service ISO/IEC 29341-11-10:2008 ISO/IEC 29341-16-1:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 11-10: Quality of Service Device Control Protocol - Part 16-1: Low Power Device Control Protocol - Low Level 2 - Quality of Service Device Service Power Architecture ISO/IEC 29341-11-11:2008 ISO/IEC 29341-16-10:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 11-11: Quality of Service Device Control Protocol - Part 16-10: Low Power Device Control Protocol - Low Level 2 - Quality of Service Manager Service Power Proxy Service ISO/IEC 29341-11-12:2008 ISO/IEC 29341-16-11:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 11-12: Quality of Service Device Control Protocol - Part 16-11: Low Power Device Control Protocol - Low Level 2 - Quality of Service Policy Holder Service Power Service ISO/IEC 29341-11-2:2008 ISO/IEC 29341-17-1:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 11-2: Quality of Service Device Control Protocol - Part 17-1: Quality of Service Device Control Protocol - Level 2 - Quality of Service Schemas Level 3 - Quality of Service Architecture ISO/IEC 29341-12-1:2015 ISO/IEC 29341-17-10:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 12-1: Remote User Interface Device Control Part 17-10: Quality of Service Device Control Protocol - Protocol - Remote User Interface Client Device Level 3 - Quality of Service Device Service ISO/IEC 29341-12-10:2015 ISO/IEC 29341-17-11:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 12-10: Remote User Interface Device Control Part 17-11: Quality of Service Device Control Protocol - Protocol - Remote User Interface Client Service Level 3 - Quality of Service Manager Service ISO/IEC 29341-12-11:2015 ISO/IEC 29341-17-12:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 12-11: Remote User Interface Device Control Part 17-12: Quality of Service Device Control Protocol - Protocol - Remote User Interface Server Service Level 3 - Quality of Service Policy Holder Service ISO/IEC 29341-12-2:2015 ISO/IEC 29341-17-13:2011 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 12-2: Remote User Interface Device Control Part 17-13: Quality of Service Device Control Protocol - Protocol - Remote User Interface Server Device Level 3 - Quality of Service Device Service - Underlying Technology Interfaces ISO/IEC 29341-13-10:2008 Information technology - UPnP Device Architecture - ISO/IEC 29341-18-1:2011 Part 13-10: Device Security Device Control Protocol - Information technology - UPnP Device Architecture - Device Security Service Part 18-1: Remote Access Device Control Protocol - Remote Access Architecture ISO/IEC 29341-13-11:2008 Information technology - UPnP Device Architecture - ISO/IEC 29341-18-10:2011 Part 13-11: Device Security Device Control Protocol - Information technology - UPnP Device Architecture - Security Console Service Part 18-10: Remote Access Device Control Protocol - Remote Access Inbound Connection Configuration ISO/IEC 29341-14-12:2011 Service Information technology - UPnP Device Architecture - Part 14-12: Audio Video Device Control Protocol - Level ISO/IEC 29341-18-11:2011 3 - Audio Video Content Directory Service Information technology - UPnP Device Architecture - Part 18-11: Remote Access Device Control Protocol - ISO/IEC 29341-14-3:2011 Remote Access Discovery Agent Service Information technology - UPnP Device Architecture - Part 14-3: Audio Video Device Control Protocol - Level 3 ISO/IEC 29341-18-12:2011 - Media Server Device Information technology - UPnP Device Architecture - Part 18-12: Remote Access Device Control Protocol - Remote Access Discovery Agent Synchronization Service

12 ISO/IEC 29341-18-13:2011 ISO/IEC 29341-20-3:2017 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 18-13: Remote Access Device Control Protocol - Part 20-3: Audio video device control protocol - Level 4 - Remote Access Transport Agent Configuration Service Media server device ISO/IEC 29341-18-2:2011 ISO/IEC 29341-20-4:2017 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 18-2: Remote Access Device Control Protocol - Part 20-4: Audio video device control protocol - Level 4 - Remote Access Client Device Datastructure template ISO/IEC 29341-18-3:2011 ISO/IEC 29341-24-1:2017 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 18-3: Remote Access Device Control Protocol - Part 24-1: Internet gateway device control protocol - Remote Access Server Device Level 2 - Internet gateway device ISO/IEC 29341-18-4:2011 ISO/IEC 29341-24-10:2017 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 18-4: Remote Access Device Control Protocol - Part 24-10: Internet gateway device control protocol - Remote Access Discovery Agent Device Level 2 - Wide area network internet protocol - Connection service ISO/IEC 29341-19-1:2011 Information technology - UPnP Device Architecture - ISO/IEC 29341-24-11:2017 Part 19-1: Solar Protection Blind Device Control Information technology - UPnP Device Architecture - Protocol - Solar Protection Blind Device Part 24-11: Internet gateway device control protocol - Level 2 - Wide area network internet protocol v6 - ISO/IEC 29341-19-10:2011 Firewall control service Information technology - UPnP Device Architecture - Part 19-10: Solar Protection Blind Device Control ISO/IEC 29341-24-2:2017 Protocol - Two Way Motion Motor Service Information technology - UPnP Device Architecture - Part 24-2: Internet gateway device control protocol - ISO/IEC 29341-2:2008 Level 2 - Wide area network connection device Information technology - UPnP Device Architecture - Part 2: Basic Device Control Protocol - Basic Device ISO/IEC 29341-24-3:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-20-1:2017 Part 24-3: Internet gateway device control protocol - Information technology - UPnP Device Architecture - Level 2 - Wide area network device Part 20-1: Audio video device control protocol - Level 4 - Audio video architecture ISO/IEC 29341-26-1:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-20-10:2017 Part 26-1: Telephony device control protocol - Level 2 - Information technology - UPnP Device Architecture - Telephony architecture Part 20-10: Audio video device control protocol - Level 4 - Audio video transport service ISO/IEC 29341-26-10:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-20-11:2017 Part 26-10: Telephony device control protocol - Level 2 - Information technology - UPnP Device Architecture - Call management service Part 20-11: Audio video device control protocol - Level 4 - Connection manager service ISO/IEC 29341-26-11:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-20-12:2017 Part 26-11: Telephony device control protocol - Level 2 - Information technology - UPnP Device Architecture - Media management service Part 20-12: Audio video device control protocol - Level 4 - Content directory service ISO/IEC 29341-26-12:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-20-13:2017 Part 26-12: Telephony device control protocol - Level 2 - Information technology - UPnP Device Architecture - Messaging service Part 20-13: Audio video device control protocol - Level 4 - Rendering control service ISO/IEC 29341-26-13:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-20-14:2017 Part 26-13: Telephony device control protocol - Level 2 - Information technology - UPnP Device Architecture - Phone management service Part 20-14: Audio video device control protocol - Level 4 - Scheduled recording service ISO/IEC 29341-26-14:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-20-2:2017 Part 26-14: Telephony device control protocol - Level 2 - Information technology - UPnP Device Architecture - Address book service Part 20-2: Audio video device control protocol - Level 4 - Media renderer device

13 ISO/IEC 29341-26-15:2017 ISO/IEC 29341-3-12:2008 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 26-15: Telephony device control protocol - Level 2 - Part 3-12: Audio Video Device Control Protocol - Calendar service Content Directory Service ISO/IEC 29341-26-16:2017 ISO/IEC 29341-3-13:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 26-16: Telephony device control protocol - Level 2 - Part 3-13: Audio Video Device Control Protocol - Presence service Rendering Control Service ISO/IEC 29341-26-2:2017 ISO/IEC 29341-3-2:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 26-2: Telephony device control protocol - Level 2 - Part 3-2: Audio Video Device Control Protocol - Media Telephony client device Renderer Device ISO/IEC 29341-26-3:2017 ISO/IEC 29341-3-3:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 26-3: Telephony device control protocol - Level 2 - Part 3-3: Audio Video Device Control Protocol - Media Telephony server device Server Device ISO/IEC 29341-27-1:2017 ISO/IEC 29341-30-1:2017 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 27-1: Friendly device control protocol - Friendly Part 30-1: IoT management and control device control information update service protocol - IoT management and control architecture overview ISO/IEC 29341-28-1:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-30-10:2017 Part 28-1: Multiscreen device control protocol - Information technology - UPnP Device Architecture - Multiscreen architecture Part 30-10: IoT management and control device control protocol - Data store service ISO/IEC 29341-28-10:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-30-11:2017 Part 28-10: Multiscreen device control protocol - Information technology - UPnP Device Architecture - Application management service Part 30-11: IoT management and control device control protocol - IoT management and control ISO/IEC 29341-28-2:2017 service Information technology - UPnP Device Architecture - Part 28-2: Multiscreen device control protocol - Screen ISO/IEC 29341-30-12:2017 device Information technology - UPnP Device Architecture - Part 30-12: IoT management and control device control ISO/IEC 29341-29-10:2017 protocol - IoT management and control transport Information technology - UPnP Device Architecture - generic service Part 29-10: Multiscreen device control protocol - Level 2 - Application management service ISO/IEC 29341-30-2:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-29-2:2017 Part 30-2: IoT management and control device control Information technology - UPnP Device Architecture - protocol - IoT management and control device Part 29-2: Multiscreen device control protocol - Level 2 - Screen device ISO/IEC 29341-31-1:2017 Information technology - UPnP Device Architecture - ISO/IEC 29341-3-1:2011 Part 31-1: Energy management device control protocol - Information technology - UPnP Device Architecture - Energy management service Part 3-1: Audio Video Device Control Protocol - Audio Video Architecture ISO/IEC 29341-4-10:2011 Information technology - UPnP Device Architecture - ISO/IEC 29341-3-10:2015 Part 4-10: Audio Video Device Control Protocol - Level 2 Information technology - UPnP Device Architecture - - Audio Video Transport Service Part 3-10: Audio Video Device Control Protocol - Audio Video Transport Service ISO/IEC 29341-4-11:2011 Information technology - UPnP Device Architecture - ISO/IEC 29341-3-11:2008 Part 4-11: Audio Video Device Control Protocol - Level 2 Information technology - UPnP Device Architecture - - Connection Manager Service Part 3-11: Audio Video Device Control Protocol - Connection Manager Service ISO/IEC 29341-4-12:2008 Information technology - UPnP Device Architecture - Part 4-12: Audio Video Device Control Protocol - Level 2 - Content Directory Service

14 ISO/IEC 29341-4-13:2011 ISO/IEC 29341-6-13:2008 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 4-13: Audio Video Device Control Protocol - Level 2 Part 6-13: Heating, Ventilation, and Air Conditioning - Rendering Control Service Device Control Protocol - House Status Service ISO/IEC 29341-4-14:2011 ISO/IEC 29341-6-14:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 4-14: Audio Video Device Control Protocol - Level 2 Part 6-14: Heating, Ventilation, and Air Conditioning - Scheduled Recording Service Device Control Protocol - Setpoint Schedule Service ISO/IEC 29341-4-2:2011 ISO/IEC 29341-6-15:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 4-2: Audio Video Device Control Protocol - Level 2 Part 6-15: Heating, Ventilation, and Air Conditioning - Media Renderer Device Device Control Protocol - Temperature Sensor Service ISO/IEC 29341-4-3:2008 ISO/IEC 29341-6-16:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 4-3: Audio Video Device Control Protocol - Level 2 Part 6-16: Heating, Ventilation, and Air Conditioning - Media Server Device Device Control Protocol - Temperature Setpoint Service ISO/IEC 29341-4-4:2011 ISO/IEC 29341-6-17:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 4-4: Audio Video Device Control Protocol - Level 2 Part 6-17: Heating, Ventilation, and Air Conditioning - Audio Video Data Structures Device Control Protocol - User Operating Mode Service ISO/IEC 29341-5-1:2008 ISO/IEC 29341-6-2:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 5-1: Digital Security Camera Device Control Part 6-2: Heating, Ventilation, and Air Conditioning Protocol - Digital Security Camera Device Device Control Protocol - Zone Thermostat Device ISO/IEC 29341-5-10:2008 ISO/IEC 29341-7-1:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 5-10: Digital Security Camera Device Control Part 7-1: Lighting Device Control Protocol - Binary Light Protocol - Digital Security Camera Motion Image Device Service ISO/IEC 29341-7-10:2008 ISO/IEC 29341-5-11:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 7-10: Lighting Device Control Protocol - Dimming Part 5-11: Digital Security Camera Device Control Service Protocol - Digital Security Camera Settings Service ISO/IEC 29341-7-11:2015 ISO/IEC 29341-5-12:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 7-11: Lighting Device Control Protocol - Switch Part 5-12: Digital Security Camera Device Control Power Service Protocol - Digital Security Camera Still Image Service ISO/IEC 29341-7-2:2008 ISO/IEC 29341-6-1:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 7-2: Lighting Device Control Protocol - Dimmable Part 6-1: Heating, Ventilation, and Air Conditioning Light Device Device Control Protocol - System Device ISO/IEC 29341-8-1:2008 ISO/IEC 29341-6-10:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 8-1: Internet Gateway Device Control Protocol - Part 6-10: Heating, Ventilation, and Air Conditioning Internet Gateway Device Device Control Protocol - Control Valve Service ISO/IEC 29341-8-10:2008 ISO/IEC 29341-6-11:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 8-10: Internet Gateway Device Control Protocol - Part 6-11: Heating, Ventilation, and Air Conditioning Local Area Network Host Configuration Management Device Control Protocol - Fan Operating Mode Service Service ISO/IEC 29341-6-12:2008 ISO/IEC 29341-8-11:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 6-12: Heating, Ventilation, and Air Conditioning Part 8-11: Internet Gateway Device Control Protocol - Device Control Protocol - Fan Speed Service Layer 3 Forwarding Service

15 ISO/IEC 29341-8-12:2008 ISO/IEC 29341-8-4:2008 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 8-12: Internet Gateway Device Control Protocol - Part 8-4: Internet Gateway Device Control Protocol - Link Authentication Service Wide Area Network Connection Device ISO/IEC 29341-8-13:2008 ISO/IEC 29341-8-5:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 8-13: Internet Gateway Device Control Protocol - Part 8-5: Internet Gateway Device Control Protocol - Radius Client Service Wireless Local Area Network Access Point Device ISO/IEC 29341-8-14:2008 ISO/IEC 29341-9-1:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 8-14: Internet Gateway Device Control Protocol - Part 9-1: Imaging Device Control Protocol - Printer Wide Area Network Cable Link Configuration Service Device ISO/IEC 29341-8-15:2008 ISO/IEC 29341-9-10:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 8-15: Internet Gateway Device Control Protocol - Part 9-10: Imaging Device Control Protocol - External Wide Area Network Common Interface Configuration Activity Service Service ISO/IEC 29341-9-11:2008 ISO/IEC 29341-8-16:2008 Information technology - UPnP Device Architecture - Information technology - UPnP Device Architecture - Part 9-11: Imaging Device Control Protocol - Feeder Part 8-16: Internet Gateway Device Control Protocol - Service Wide Area Network Digital Subscriber Line Configuration Service ISO/IEC 29341-9-12:2008 Information technology - UPnP Device Architecture - ISO/IEC 29341-8-17:2008 Part 9-12: Imaging Device Control Protocol - Print Basic Information technology - UPnP Device Architecture - Service Part 8-17: Internet Gateway Device Control Protocol - Wide Area Network Link Configuration Service ISO/IEC 29341-9-13:2008 Information technology - UPnP Device Architecture - ISO/IEC 29341-8-18:2008 Part 9-13: Imaging Device Control Protocol - Scan Information technology - UPnP Device Architecture - Service Part 8-18: Internet Gateway Device Control Protocol - Wide Area Network Internet Protocol Connection ISO/IEC 29341-9-2:2008 Service Information technology - UPnP Device Architecture - Part 9-2: Imaging Device Control Protocol - Scanner ISO/IEC 29341-8-19:2008 Device Information technology - UPnP Device Architecture - Part 8-19: Internet Gateway Device Control Protocol - ISO/IEC 29361:2008 Wide Area Network Plain Old Telephone Service Link Information technology - Web Services Interoperability - Configuration Service WS-I Basic Profile Version 1.1 ISO/IEC 29341-8-2:2008 ISO/IEC 29362:2008 Information technology - UPnP Device Architecture - Information technology - Web Services Interoperability - Part 8-2: Internet Gateway Device Control Protocol - WS-I Attachments Profile Version 1.0 Local Area Network Device ISO/IEC 29363:2008 ISO/IEC 29341-8-20:2008 Information technology - Web Services Interoperability - Information technology - UPnP Device Architecture - WS-I Simple SOAP Binding Profile Version 1.0 Part 8-20: Internet Gateway Device Control Protocol - Wide Area Network Point-to-Point Protocol Connection ISO/IEC 29642:2009 Service Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW DL format - ISO/IEC 29341-8-21:2008 Capacity: 8,55 Gbytes and 2,66 Gbytes per side Information technology - UPnP Device Architecture - (recording speed 2,4X) Part 8-21: Internet Gateway Device Control Protocol - Wireless Local Area Network Configuration Service ISO/IEC 29881:2010 Information technology - Systems and software ISO/IEC 29341-8-3:2008 engineering - FiSMA 1.1 functional size measurement Information technology - UPnP Device Architecture - method Part 8-3: Internet Gateway Device Control Protocol - Wide Area Network Device ISO/IEC 30115:2018 Information technology - scalable platforms management API specification

16 ISO/IEC 30118-1:2018 ISO/IEC 40314:2016 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - Open Connectivity Foundation Information technology - Mathematical Markup (OCF) Specification - Part 1: Core specification Language (MathML) Version 3.0 2nd Edition ISO/IEC 30118-2:2018 ISO/IEC 40500:2012 Information technology - Open Connectivity Foundation Information technology - W3C Web Content (OCF) Specification - Part 2: Security specification Accessibility Guidelines (WCAG) 2.0 ISO/IEC 30118-3:2018 ISO/IEC 7498-1:1994 Information technology - Open Connectivity Foundation Information technology - Open Systems Interconnection (OCF) Specification - Part 3: Bridging specification - Basic Reference Model: The Basic Model ISO/IEC 30118-4:2018 ISO/IEC 7498-3:1997 Information technology - Open Connectivity Foundation Information technology - Open Systems Interconnection (OCF) Specification - Part 4: Resource type - Basic Reference Model: Naming and addressing specification ISO/IEC 7498-4:1989 ISO/IEC 30118-5:2018 Information processing systems - Open Systems Information technology - Open Connectivity Foundation Interconnection - Basic Reference Model - Part 4: (OCF) Specification - Part 5: Smart home device Management framework specification ISO/IEC 8211:1994 ISO/IEC 30118-6:2018 Information technology - Specification for a data Information technology - Open Connectivity Foundation descriptive file for information interchange (OCF) Specification - Part 6: Resource to AllJoyn interface mapping specification ISO/IEC 8326:1996 Information technology - Open Systems Interconnection ISO/IEC 30182:2017 - Session service definition Smart city concept model - Guidance for establishing a model for data interoperability ISO/IEC 8326:1996/Amd 1:1998 - Amendment 1: Efficiency enhancements ISO/IEC 33071:2016 Information technology - Process assessment - An ISO/IEC 8326:1996/Amd 2:1998 integrated process capability assessment model for - Amendment 2: Nested Connections Functional Unit Enterprise processes ISO/IEC 8326:1996/Cor 1:2002 ISO/IEC 40210:2011 Corrigendum Information technology - W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition) ISO/IEC 8327-1:1996 Information technology - Open Systems Interconnection ISO/IEC 40220:2011 - Connection-oriented Session protocol: Protocol Information technology - W3C SOAP Version 1.2 Part 2: specification Adjuncts (Second Edition) ISO/IEC 8327-1:1996/Amd 1:1998 ISO/IEC 40230:2011 - Amendment 1: Efficiency enhancements Information technology - W3C SOAP Message Transmission Optimization Mechanism ISO/IEC 8327-1:1996/Amd 2:1998 - Amendment 2: Nested Connections Functional Unit ISO/IEC 40240:2011 Information technology - W3C Web Services Addressing ISO/IEC 8327-1:1996/Cor 1:2002 1.0 - Core Corrigendum ISO/IEC 40250:2011 ISO/IEC 8327-2:1996 Information technology - W3C Web Services Addressing Information technology - Open Systems Interconnection 1.0 - SOAP Binding - Connection-oriented Session protocol: Protocol Implementation Conformance Statement (PICS) ISO/IEC 40260:2011 proforma Information technology - W3C Web Services Addressing 1.0 - Metadata ISO/IEC 8441-1:1991 Information technology - High density digital recording ISO/IEC 40270:2011 (HDDR) - Part 1: Unrecorded magnetic tape for (HDDR) Information technology - W3C Web Services Policy 1.5 - applications Framework ISO/IEC 8441-2:1991 ISO/IEC 40280:2011 Information technology - High density digital recording Information technology - W3C Web Services Policy 1.5 - (HDDR) - Part 2: Guide for interchange practice Attachment

17 ISO/IEC 8571-5:1990 ISO/IEC 8613-5:1994/Cor 2:1998 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information processing systems - Open Systems Corrigendum Interconnection - File Transfer, Access and Management - Part 5: Protocol Implementation ISO/IEC 8613-6:1994 Conformance Statement Proforma Information technology - Open Document Architecture (ODA) and Interchange Format: Character content ISO/IEC 8613-1:1994 architectures Information technology - Open Document Architecture (ODA) and interchange format: Introduction and general ISO/IEC 8613-6:1994/Cor 1:1998 principles Corrigendum ISO/IEC 8613-1:1994/Cor 1:1998 ISO/IEC 8613-7:1994 Corrigendum Information technology - Open Document Architecture (ODA) and Interchange Format: Raster graphics content ISO/IEC 8613-10:1995 architectures Information technology - Open Document Architecture (ODA) and Interchange Format - Part 10: Formal ISO/IEC 8613-7:1994/Amd 1:1998 specifications - Amendment 1 ISO/IEC 8613-11:1995 ISO/IEC 8613-7:1994/Cor 1:1998 Information technology - Open Document Architecture Corrigendum (ODA) and interchange format: Tabular structures and tabular layout ISO/IEC 8613-8:1994 Information technology - Open Document Architecture ISO/IEC 8613-12:1996 (ODA) and Interchange Format: Geometric graphics Information technology - Open Document Architecture content architectures (ODA) and interchange format: Identification of document fragments ISO/IEC 8613-9:1996 Information technology - Open Document Architecture ISO/IEC 8613-14:1997 (ODA) and interchange format: Audio content Information technology - Open Document Architecture architectures (ODA) and interchange format: Temporal relationships and non-linear structures ISO/IEC 8650-2:1997 Information technology - Open Systems Interconnection ISO/IEC 8613-2:1995 - Protocol specification for the Association Control Information technology - Open Document Architecture Service Element: Protocol Implementation Conformance (ODA) and interchange format: Document structures Statement (PICS) proforma ISO/IEC 8613-2:1995/Cor 1:1998 ISO/IEC 8822:1994 Corrigendum Information technology - Open Systems Interconnection - Presentation service definition ISO/IEC 8613-2:1995/Cor 2:1998 Corrigendum ISO/IEC 8822:1994/Amd 1:1998 - Amendment 1: Efficiency enhancements ISO/IEC 8613-3:1995 Information technology - Open Document Architecture ISO/IEC 8822:1994/Amd 2:1998 (ODA) and interchange format: Abstract interface for the - Amendment 2: Nested connections functional unit manipulation of ODA documents ISO/IEC 8823-1:1994 ISO/IEC 8613-4:1994 Information technology - Open Systems Interconnection Information technology - Open Document Architecture - Connection-oriented presentation protocol: Protocol (ODA) and Interchange Format: Document profile specification ISO/IEC 8613-4:1994/Cor 1:1998 ISO/IEC 8823-1:1994/Amd 1:1998 Corrigendum - Amendment 1: Efficiency enhancements ISO/IEC 8613-4:1994/Cor 2:1998 ISO/IEC 8823-1:1994/Amd 2:1998 Corrigendum - Amendment 2: Nested connections functional unit ISO/IEC 8613-5:1994 ISO/IEC 8823-2:1997 Information technology - Open Document Architecture Information technology - Open Systems Interconnection (ODA) and Interchange Format: Open Document - Connection-oriented presentation protocol: Protocol Interchange Format Implementation Conformance Statement (PICS) proforma ISO/IEC 8613-5:1994/Cor 1:1998 Corrigendum ISO/IEC 9040:1997 Information technology - Open Systems Interconnection - Virtual Terminal Basic Class Service

18 ISO/IEC 9041-1:1997 ISO/IEC 9576-2:1995 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Virtual Terminal Basic Class Protocol - Part 1: - Connectionless Presentation protocol: Protocol Specification Implementation Conformance Statement (PICS) proforma ISO/IEC 9041-2:1997 Information technology - Open Systems Interconnection ISO/IEC 9595:1998 - Virtual Terminal Basic Class Protocol - Part 2: Protocol Information technology - Open Systems Interconnection Implementation Conformance Statement (PICS) - Common management information service proforma ISO/IEC 9596-1:1998 ISO/IEC 9066-1:1989 Information technology - Open Systems Interconnection Information processing systems - Text communication - - Common management information protocol - Part 1: Reliable Transfer - Part 1: Model and service definition Specification ISO/IEC 9066-2:1989 ISO/IEC 9596-1:1998/Cor 1:1999 Information processing systems - Text communication - Corrigendum Reliable Transfer - Part 2: Protocol specification ISO/IEC 9596-1:1998/Cor 2:2002 ISO/IEC 9066-3:1996 Corrigendum Information technology - Open Systems Interconnection - Reliable Transfer: Protocol Implementation ISO/IEC 9596-2:1993 Conformance Statement (PICS) proforma Information technology - Open Systems Interconnection - Common management information protocol: Protocol ISO/IEC 9072-1:1989 Implementation Conformance Statement (PICS) Information processing systems - Text communication - proforma Remote Operations - Part 1: Model, notation and service definition ISO/IEC 9596-2:1993/Cor 1:1993 Corrigendum ISO/IEC 9072-2:1989 Information processing systems - Text communication - ISO/IEC 9596-2:1993/Cor 2:1996 Remote Operations - Part 2: Protocol specification Corrigendum ISO/IEC 9072-3:1996 ISO/IEC 9596-2:1993/Cor 3:1998 Information technology - Open Systems Interconnection Corrigendum - Remote Operations: Protocol Implementation Conformance Statement (PICS) proforma ISO/IEC 9646-1:1994 Information technology - Open Systems Interconnection ISO/IEC 9293:1994 - Conformance testing methodology and framework - Information technology - Volume and file structure of Part 1: General concepts disk cartridges for information interchange ISO/IEC 9646-2:1994 ISO/IEC 9545:1994 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Conformance testing methodology and framework - - Application Layer structure Part 2: Abstract Test Suite specification ISO/IEC 9548-1:1996 ISO/IEC 9646-3:1998 Information technology - Open Systems Interconnection Information technology - Open Systems Interconnection - Connectionless Session protocol: Protocol - Conformance testing methodology and framework - specification Part 3: The Tree and Tabular Combined Notation (TTCN) ISO/IEC 9548-1:1996/Amd 1:2000 - Amendment 1: Efficiency enhancements ISO/IEC 9646-4:1994 Information technology - Open Systems Interconnection ISO/IEC 9548-2:1995 - Conformance testing methodology and framework - Information technology - Open Systems Interconnection Part 4: Test realization - Connectionless Session protocol: Protocol Implementation Conformance Statement (PICS) ISO/IEC 9646-5:1994 proforma Information technology - Open Systems Interconnection - Conformance testing methodology and framework - ISO/IEC 9576-1:1995 Part 5: Requirements on test laboratories and clients for Information technology - Open Systems Interconnection the conformance assessment process - Connectionless Presentation protocol: Protocol specification ISO/IEC 9646-6:1994 Information technology - Open Systems Interconnection ISO/IEC 9576-1:1995/Amd 1:2000 - Conformance testing methodology and framework - - Amendment 1: Efficiency enhancements Part 6: Protocol profile test specification

19 ISO/IEC 9646-7:1995 ISO/IEC TR 13233:1995 This is a preview of "ISO Catalog". Click here to purchase the full version from the ANSI store. Information technology - Open Systems Interconnection Information technology - Interpretation of accreditation - Conformance testing methodology and framework - requirements in ISO/IEC Guide 25 - Accreditation of Part 7: Implementation Conformance Statements Information Technology and Telecommunications testing laboratories for software and protocol testing ISO/IEC 9646-7:1995/Cor 1:1997 services Corrigendum ISO/IEC TR 15938-8:2002/Amd 4:2009 ISO/IEC 9804:1998 - Amendment 4: Extraction of audio features from Information technology - Open Systems Interconnection compressed formats - Service definition for the Commitment, Concurrency and Recovery service element ISO/IEC TR 15938-8:2002/Amd 5:2010 - Amendment 5: Extraction and matching of image ISO/IEC 9805-1:1998 signature tools Information technology - Open Systems Interconnection - Protocol for the Commitment, Concurrency and ISO/IEC TR 16166:2010 Recovery service element: Protocol specification Information technology - Telecommunications and information exchange between systems - Next ISO/IEC 9805-2:1996 Generation Corporate Networks (NGCN) - Security of Information technology - Open Systems Interconnection session-based communications - Protocol for the Commitment, Concurrency and Recovery service element: Protocol Implementation ISO/IEC TR 18047-7:2010 Conformance Statement (PICS) proforma Information technology - Radio frequency identification device conformance test methods - Part 7: Test ISO/IEC 9834-2:1993 methods for active air interface communications at 433 Information technology - Open Systems Interconnection MHz - Procedures for the operation of OSI Registration Authorities - Part 2: Registration procedures for OSI ISO/IEC TR 24763:2011 document types Information technology - Learning, education and training - Conceptual Reference Model for Competency ISO/IEC 9834-4:1991 Information and Related Objects Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration ISO/IEC TR 24774:2010 Authorities - Part 4: Register of VTE Profiles Systems and software engineering - Life cycle management - Guidelines for process description ISO/IEC 9834-5:1991 Information technology - Open Systems Interconnection ISO/IEC TR 29110-5-1-2:2011 - Procedures for the operation of OSI Registration Software engineering - Lifecycle profiles for Very Small Authorities - Part 5: Register of VT Control Object Entities (VSEs) - Part 5-1-2: Management and Definitions engineering guide: Generic profile group: Basic profile ISO/IEC TR 10000-2:1998 ISO/IEC TR 29138-2:2009 Information technology - Framework and taxonomy of Information technology - Accessibility considerations for International Standardized Profiles - Part 2: Principles people with disabilities - Part 2: Standards inventory and Taxonomy for OSI Profiles ISO/IEC TR 29138-3:2009 ISO/IEC TR 10000-3:1998 Information technology - Accessibility considerations for Information technology - Framework and taxonomy of people with disabilities - Part 3: Guidance on user needs International Standardized Profiles - Part 3: Principles mapping and Taxonomy for Open System Environment Profiles ISO/IEC TR 29163-1:2009 ISO/IEC TR 10183-1:1993 Information technology - Sharable Content Object Information technology - Text and office systems - Reference Model (SCORM®) 2004 3rd Edition - Part 1: Office Document Architecture (ODA) and interchange Overview Version 1.1 format - Technical Report on ISO 8613 implementation testing - Part 1: Testing methodology ISO/IEC TR 29163-2:2009 Information technology - Sharable Content Object ISO/IEC TR 10183-2:1993 Reference Model (SCORM®) 2004 3rd Edition - Part 2: Information technology - Text and office systems - Content Aggregation Model Version 1.1 Office Document Architecture (ODA) and interchange format - Technical Report on ISO 8613 implementation ISO/IEC TR 29163-3:2009 testing - Part 2: Framework for abstract test cases Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 3: ISO/IEC TR 12382:1992 Run-Time Environment Version 1.1 Permuted index of the vocabulary of information technology

20