(3) Installation

M.2 SATA SSD (up to 80mm) a) Remove the front panel from the enclosure and slide out the circuit board from the enclosure.

Window XP or later, Mac OS 10.4 or later

4.3 x 1.6 x 0.35 inches

USB Powered

M.2 enclosure, mini screw driver, Package Includes b) Insert the M.2 SATA SSD into the socket an angle. Press screws, USB 3.0 cable, User Guide down gently and tighten the mounting screw. Note: If installing a 60mm or shorter M.2, move the screw mount to the appropriate hole in the PCB. M.2 SATA to USB 3.0 Enclosure Installation Guide LED indicator: LED OFF = Power OFF Solid = Power ON Flashing = Read/Write Access

(3) Installation (continued) (4) Formatting (6) FAQ a) Slide the circuit board back into the enclosure and install The drive must be formatted before it is accessible. Q: What le system should I use to the drive? the front panel using the included screws. a) Connect the M.2 drive to the host . A: This will depend on how you want to use the drive but in b) Use Disk Management on the PC or Disk Utility on the Mac general, we recommend: to format the drive. • /XP/Vista/7/8 --> NTFS To format using Windows: • Mac OS X --> HFS+ (Mac OS Extended) http://oyendigital.com/windows-reformat.html • For use with both PC and Mac --> FAT32 or exFAT To format using MAC OS: http://oyendigital.com/mac-reformat.html

(5) Safety Information (7) Warranty Information

Location and placing precautions This product includes a one (1) year repair/replacement Do not cover the M.2 enclosure and do not place the unit warranty provided by Oyen Digital. This warranty is non- on other heat-sensitive equipment. Avoid positioning it in the transferable and is limited to the original purchaser. Warranty following places: service may be requested by completing the form at the following link: www.oyendigital.com/rma-request-form.html • Locations with direct sunlight or other sources of heat with high temperatures (over 120° F) or high humidity (over 90%). For our complete warranty policy, visit: www.oyendigital.com/warranty.html • Do not expose the product to water or humid conditions.