Tavor Sear Pack The World’s Finest Triggers SEAR PACK INSTALLATION INSTRUCTIONS

Hammer Hammer Cocked Released Position PosiƟon Pins out with open bolt carrier lever

***Please note – Be sure the hammer is in the COCKED position before attempting to remove the Sear Housing Mechanism***

ThankThank you you for purchasing for purchasing this Timney . this It hasTimney been designed Trigger. and manufactured It has to been provide you with a lifetime of dependable service. Each trigger is hand tested and calibrated on a before leaving designedthe factory. Please and read manufactured these instructions fully to before provide you begin you installing with the trigger, a lifetime you’ll be gladof you dependabledid. service. Each trigger is hand tested and calibrated on a rifle1. Unload before the rifle leaving and remove the the magazine,factory. visually Please and physically read ensure these that theinstructions rifle is unloaded before beginning trigger installation fully2. beforePress the TWOyou (2) beginlocking pins installing on the RIGHT theside and trigger, pull them throughyou’ll the be rifle glad to the LEFTyou did. side of the rifle until they stop. (Please note the pins have detents to prevent them from being pulled out completely) 1. 3.UnloadPull the sear the pack rifle out of theand housing remove the magazine, visually and 4. With the stock sear pack removed place the TIMNEY sear pack into the housing and reinsert the physicallylocking pins into ensure the housing that the rifle isunloaded before beginning 5. Close the bolt carrier stop lever and dry fire the weapon unloaded to make sure everything is triggerworking properlyinstallation

2. Press the TWO (2) locking pins on the RIGHT side and pull them through the rifle to theLEFT side of the rifle until they

PHONEstop. – 623-223-1111 (Please note the pins have detents to prevent them from FAX – 623-223-1112 2020 W QUAIL AVE, PHOENIX AZ. 85027 [email protected] being pulled out completely) www.timneytriggers.com

3. Pull the sear pack out of the housing

4. With the stock sear pack removed place the TIMNEY sear pack into the housing and reinsert the locking pins into the housing

5. Close the bolt carrier stop lever and dry fire the weapon unloaded to make sure everything is working properly Function and Check – (Do all function testing with an UNLOADED Rifle) 1. FunctionalTAVOR Testing SAR SEAR PACK INSTALLATION INSTRUCTION a. Verify the sear pack is inserted correctly and the bolt carrier is closed and the retaining pins inserted b. Verify the selector switch moves from fire to safe freely 2. Safety Testing Functiona. Verifyand Safety the Check safety – (Do allis function working testing properly with an UNLOADED when the Rifle) selector 1. Functionalswitch Testingis set on safe. i. Witha. Verify the the safety sear pack engaged is inserted correctly and the and thetrigger bolt carrier is pulled is closed doesand the theretaining pins inserted b.hammerVerify the release?selector switch moves from fire to safe freely 2. Safetyii. When Testing the safety is released does the hammer release? 3. Pull Weighta. Verify the safety is working properly when the selector switch is set on safe. i. With the safety engaged and the trigger is pulled does the hammer release? a. The pullii. weightWhen the is safety preset is released from does the the factory hammer release?at 3.5-4 lbs. This 3. Pullcan’t Weight be adjusted on the sear pack. a. The pull weight is preset from the factory at 3.5-4 lbs. This can’t be adjusted on the sear pack.

QR Codes

Step 3 - Final installation Release bolt carrier stop lever, insert pins and pull the action several times making sure the is working properly. Next dry fire the rifle several time Timney before Webpage inserting Instructions any ammo to establish the rifle is working properly

TIMNEY TRIGGER GUARANTEE

Material and workmanship: This Timney trigger has been carefully inspected, tested and adjusted to give a Nowlifetime go of outdependable and enjoy service. Everyyour possible new TIMNEYcare has been TRIGGER! exercised in its design and construction. If any defect in workmanship or material should develop under conditions of normal use and service, any necessary repairs, including parts and labor willTIMNEY be made atTRIGGER NO CHARGE GUARANTEE to the purchaser providing that our inspection reveals parts were not damaged through accident, alteration, misuse, abuse or other causes beyond our control.Material We and neither workmanship: assume nor This imply Timney any trigger oral or hasstatutory been carefullywarranties, inspected, and we neithertested and assume adjusted nor authorize to give a anylifetime person of dependableto assume us service. for any Everyobligation possible or liability care has in connectionbeen exercised with in this its trigger.design and Repairs construction. or disassembly If any ofdefect this trigger in workmanship in any manner or material without should specific develop authorization, under conditions voids the guarantee.of normal use and service, any necessary repairs, including parts and labor will be made at NO CHARGE to the purchaser providing that our inspection www.timneytriggers.comreveals parts were not damaged through accident, 2020 alteration, W. Quail misuse, Ave abuse or other causesPhone beyond - 623-223-1111 our [email protected]. We neither assume nor imply any oral orPhoenix statutory AZ warranties,85027 and we neither assumeFax - 623-223-1112nor authorize any person to assume us for any obligation or liability in connection with this trigger. Repairs or disassembly of this trigger in any manner without specific authorization, voids the guarantee.

PHONE – 623-223-1111 FAX – 623-223-1112 2020 W QUAIL AVE, PHOENIX AZ. 85027 [email protected] www.timneytriggers.com