Pandora FMS feature map

/ Gran Vía 62 8º Izqda Madrid, España.

(+34) 91 559 72 22 [email protected] www.pandorafms.com features

Traffic monitoring Through sFlow, NetFlow or JFlow method.

Supports IPv4 and IPv6 Supports IP versions IPv4 and IPv6.

The information shows a history with a minimum Traffic information detail granularity of one minute and a history of several years. The graphics zoom in and keep the highest level of detail.

Monitoring network interfaces, bandwidth, Communication link consumption, maximum occupancy, availability, performance errors, discards, packet losses, real speed, etc.

Presentations in active network diagrams. These Map and network network diagrams will be updated automatically diagram creation with the new network nodes, identifying new elements.

Discovered equipment Brand, model and firmware are automatically features specified.

Equipment usage CPU, memory, disk and communication equipment buffer usage.

Compatibility with the SNMP and ICMP standard Compatibility for obtaining information from devices, for versions with SNMP 1, 2, 2c and 3.

Use of physical and logical Open and in-use physical and logical ports are ports shown for routers and switches.

Log collection parallel to monitoring. No Log and event collection megabyte limit. Log collection via syslog (remote) and local agents ( and Windows).

If the information is available, Pandora FMS is able Relationship between ne- to show the relationships at network level and twork devices at network the link level between the different ports of the and link level routers / switches and the connected equipment.

pandorafms.com 2 Scans and generates monitoring information Detection of active devices of physical and virtual equipment, servers, workstations, routers, switches, firewalls, band- to monitor width administrators, load balancers, access point and printers.

Application server Verifies OAS, JBoss, Tomcat, WebSphere, GlassFish performance services and equivalents.

Remote connection to Allows remote connection to communications equipment centrally in the solution itself, network equipment through SSH or .

Distribution of Allows the use of intermediate probes to be able intermediate probes for to monitor the network in a distributed way. information collection

Possibility of high Rates network monitoring times at intervals of frequency polling minimum frequency up to five seconds.

Allows the tool administrator to define their own Custom remote queries complex (multi-step) remote checks based on dialogue / response over a TCP port.

Self-increase of test retries Increases checking attempts intervals in case of in case of failure failure.

Scheduled Schedules check-ups on specific dates and times. monitoring

Checks Windows computers remotely, using a WMI remote queries WMI interface to add your own WML statements.

Queries Linux and Unix computers remotely, SSH Remote Queries using remote commands on SSH.

Collects traps and alert assignments to these values. Collects numerical and / or alphanumeric values to enrich the alerts with data obtained SNMP trap receiving from traps: critical system temperature, name of the down interface, filesystem alert, critical-state memory / CPU, etc.

pandorafms.com 3 Packet loss Monitors network interface packet loss.

Show the exact position of each device (GPS) Real-time geographic and, if it is updated, that movement is shown maps (GIS) on the map. You can save a movement history of each element and see it on the map.

Integrated reports

Monitors business processes in real time in a BAM monitoring single console (dashboard).

Report scheduling allows filtering informa- tion in time periods, reporting equipment Reports failures (falls), warnings, displaying descriptive problem statistics and simple or combined graphs (multiseries).

SLA Reports Daily, weekly and monthly SLA reports, in addition to global reports (by time periods).

Indicate, in a given period, the total number Availability reports of tests performed, the success and failure percentages in that time for each test performed.

Top-N type custom The operator can define a set of data that the reports application shows according to applied filters.

Planned stops and Excludes from all types of reports the periods exclusion defined as maintenance windows.

End users can easily create reports from Report templates templates defined by the administrator.

Sending scheduled The administrator can define report scheduled reports sending by email (in PDF).

pandorafms.com 4 They allow the operator to create their own graphic panels where to include monitoring Graphic views data: graphics, status icons and real-time values. These screens can relate to each other.

Graphs and reports show real-time data at all Real-time data times, not pre-calculated data.

Pandora FMS is managed in real time from a Information web application for modern standard browsers availability (Edge, Firefox, Safari, Chrome).

Information is presented centrally in a single Information interface, using graphics, screens, dashboards display and information lists in different views.

Alert System

Alarm generation and sending are available as Alarm generation on-screen alerts and allow immediate sending by and sending text message to mobile phones or email.

Filters the alarm sending by maximum number Alarm filtering of repetitions, minimum number of repetitions and scaling and consecutive failure concurrency.

Event auto-validation Recovered events will allow auto-validation when the problem that triggered them is solved.

Allows performing manual actions on the Manual corrective events using the information available to actions launch diagnostic tools, open incidents, add notes or leave the event in work mode.

Establishes sets of logical rules (AND, OR, NOT) Alarm correlation that allow to refine alarms based on the events collected in the monitored systems.

pandorafms.com 5 Alarm sending is user definable, so that it can be Programmable alarm integrated with new platforms, such as Telegram, sending format via API Rest

Allows audible messages to be received by an Sound warning console operator, based on filters by origin and severity. This system is complementary to the others

Mobile application for Enables notice reception and their real-time receiving messages checking for Android and iOS

Transactional WEB monitoring

Scan and generate information on Java application Application and web (OAS-Oracle, JBoss-Redhat, WebLogic), IIS software servers and Apache monitoring.

Verifies the proper operation of each step of an Transactional monitoring application from the user’s point of view, being and user experience able to replicate each one, measuring success and total time.

Access via Checks application availability through user authentication login and password.

Checks the availability of a request in the application following a navigation flow (trace); Application traceability each independent request is monitored indi- vidually, in addition to the entire transaction.

Scans application services to evaluate operation Application availability by URL and IP.

Breaks down in time periods each of the key Transaction time transaction steps (server connection time, first breakdown iteration response time, application downloading time, etc).

pandorafms.com 6 Remote web application monitoring is possible Navigation with from different geographically distributed points, distributed probes synchronized by a central manager.

Makes screenshots to use them as informs in Screenshots case of failure and thus to analyze the problem as it looks like for a real user.

Database monitoring

Commercial relational Supports Oracle, Sybase, Informix, DB2, Microsoft engines SQL Server, MySQL and PostgreSQL. supported

Commercial NoSQL database Supports MongoDB, RavenDB, HBase and engines supported Cassandra engines.

Storage system Hard disk physical storage, disk groups, tablespace monitoring -datafiles-.

Reports availability by opening and closing a Availability connection and services at level.

Reports database locks, number of open Transactions sessions, number of open cursors.

Logs errors, warnings, user and session status, Log relation of events and checks replication processes; updates data outside warning applications; generates and verifies backups.

Identify the database usage percentage on the CPU usage server that contains it.

Cache usage Shows cache usage by the database.

Total number of connections Shows connection real-time movement. and their status

pandorafms.com 7 Job failures Reports any errors in job execution.

Fragmentation Identifies fragmentation level in data stores.

Generates manual and programmed alarms for Backup errors failures in backup.

Monitors the result of custom SQL (or equivalent) Custom SQL queries queries.

Monitoring Servers and Equipment

It has the local and remote agent feature, so that Agents the equipment can be monitored in both ways, as appropriate.

Allows distributing and installing agents Remote agent unattended from the administration console; installation Windows and Linux systems.

Agents are configured when contacting for the Automatic agent first time the central server, and a configuration provision determined by a set of rules is applied.

In 32-bit and 64-bit architectures, information Support to different is obtained from Windows, Linux and Unix platforms operating systems (Solaris, HP-UX, AIX), Mac OS X and BSD systems.

CPU, RAM, physical memory, virtual memory, ca- Server hardware che and paging are monitored. Open processes, operation zombies, swap, access to the environment, etc.

Operation Fans and internal temperature. Information

Availability, available space per partition and Storage mounting points.

pandorafms.com 8 New storage system hot Monitoring new mounting points automatically. detection

Network card Availability and charging by network card.

Operating System Describes operating systems and equipment and general configuration configuration.

Allows monitoring based on whether certain Conditional monitoring criteria are met, evaluating it in each execution.

Local corrective They run on agents, based on a given condition actions

Screen Allows taking “screenshots” of the output of monitoring certain commands

Service and Process Allows restart in case of failure, and monitors it Watchdog automatically (Windows).

Use of intermediate proxies to send If agents cannot contact the central server. information

The information will be stored locally if the Local data collection in network falls down, so that, when it can con- case of disconnection nect again with the central server, it sends the information for that period.

Execution of agents with So that they cannot access inside information. users without privileges

Valid for any manufacturer and any cluster Cluster monitoring model, A / P or A / A, and also for application or network clusters.

Remote Agent Individually or collectively for configuration bulk Configuration changes.

VMware, HypeErV, HPVM, RHEL VM, Nutanix, Virtual environments OpenNebula, IBM, HMC, LPAR, KVM and XenServer monitoring.

pandorafms.com 9 Environment monitoring

UPS Compatibility with the main manufacturers.

Air conditioning History of use and air conditioning sensors, generation of reports and alarms.

Access control Historical of access control to the computer center, generation of reports and alarms.

IoT / Sensors Possibility of integration with different IoT systems through direct connection (SNMP) or Rest API.

Inventory

Obtaining the inventory Inventory is obtained both by remote network probes or agents.

Inventory systems Network equipment (routers,switches), as well as Linux or Windows servers.

Network equipment Periodically collects remote configurations of network equipment and stores their different remote configuration versions over time

Detection of inventory Allows the operator to be notified in case of detecting changes changes from one inventory review to another.

Display of equipment Visually displays configuration changes on remo- configuration te computers from which your configuration is differences collected as part of the inventory.

CPU Collects information about CPUs.

Collects information about PC-installed video VIdeo cards.

Collects information about computer-installed Hard drives hard drives.

pandorafms.com 10 Collects information about each of the partitions Partitions on each computer.

Collects information about installed network NIC cards and drivers.

Collects information about computer-installed Patches patches.

Collects information about computer-installed Software software.

Collects information computer-running Processes processes.

Collects information about computer-installed RAM memory modules.

Collects the number of administrator users or Users guests on each computer.

IP addressing management

The tool has IP detection in a subnet, checking Automatic the response of each IP, resolving hostname and discovery operating system.

The tool can configure, enable and disable each IP manually, add events in the IP, comments for IP Administration each IP, reserve IPs and monitor dynamically (IPAM) the use of network IPs by network, subnet and supernet.

Customizing The tool can filter and view different IP groups. IP views

The IPAM system can be integrated with the Integrated IP with Microsoft server through local real-time data Microsoft DHCP Server collection to refresh and update the status of management IPs, including your reservation, lease and each IP lease time.

pandorafms.com 11 It allows the following data: network (address Subnet calculator and bit mask), network mask, network wildcard, compatible with network address, broadcast address, first valid IPv4 and IPV6 IP, last valid IP and network IP number.

Remote control

Integrated into the software, without calling a Computer Remote third tool. Integrated in the interface. Compatible Desktop with Windows, Linux and Mac systems.

Integrated in the tool Interactive access by shell Remote shell to Linux and Windows computers.

Integrated in the main console of the tool, it Copy of allows the user to access the remote filesystem bidirectional files to download, delete and upload files from the PC.

Process and service Allows starting, stopping and restarting remote control processes and services of the managed machine.

Issue manage ment

Creating manual tickets Creates an issue associated with an event on an from an event active problem to closely monitor the issue. or alert

Creation / Update of Creates tickets as an automatic response to a automatic tickets problem detected by monitoring.

Defines a life cycle for each ticket based on the Custom work creator, dates, criticality, work group, etc. This life cycle incorporates flow change notifications workflow by email, automatic scaling and issue closure validation through external users.

pandorafms.com 12 Training and support

Training in a standard way technicians on minimum Official training indicated bases. Said training includes all usage levels and tool implementation.

Official certifications Accreditation, by means of an official certification, certifying the knowledge of the technicians.

To make training easier, it has an online eLearning Online training platform platform to learn about the tool and certifications.

Permission system and profiles

With the same solution you can give service to Multitenant different clients or groups without seeing each other.

Profiling system Different users of the same group can perform according to groups different functions. and accesses

It reflects what operations each user has performed Internal audit and when, including failed access attempts.

Allows forcing a policy of password change, with Password Policy passwords of minimum length, special characters and history of old passwords.

Password Recovery A solution is provided so that the user can recover System a forgotten password.

It has its own system of users, profiles and roles, Authentication and supports Active Directory, LDAP and SAML.

Via Google Auth or equivalent, uses a mobile or Dual authentication external hardware device to perform a double system authentication to enter the system.

pandorafms.com 13 Architecture

Problem scaling system Allows analyzing the information based on the and root cause service as a whole, by grouping information. This makes the analysis of the problem root cause analysis easier.

Distributes the load in case of new node Automatic provisioning registrations on the corresponding servers, or system by load or custom rules.

Long-term data It is able to keep all data history at full resolution storage for at least three years.

Communication between the different components Communication via of the architecture is done through official ports, standard ports listed by the IANA.

A system is provided by which an isolated network Isolated environment can be monitored through a component that monitoring does not have direct connectivity to the central monitoring infrastructure.

Backup Includes an integrated backup system

Creates monitoring, correlation and inventory policies. These policies can be applied by Policies specific groups or users, so that similar machine sets can be managed easily, quickly and evenly.

A single console is available, regardless of the final scaling of the implementation. The same Single console user will work for all the tool features (network, applications, logs, reports) without logging in to different screens.

There is an unlimited chance of growth by Horizontal scalability adding new servers.

HA is integrated in the solution. All system High availability components support high availability without requiring external elements.

pandorafms.com 14 Allows each element of the architecture to be in Distributed elements physical locations (different servers).

Provides REST API and command line tools to API/CLI manage the solution.

The data model of the entire platform is open Open SQL Database and documented, in order to use external queries to retrieve data.

Allows total product rebranding, hiding the name of the manufacturer, the name of the Rebranding product and changing colors and icons by the administrator.

It is licensed based on the total number of devices, Licensing regardless of the total number of metrics collected on each device.

pandorafms.com 15 c/ Gran Vía 62 8º Izqda Madrid, España.

(+34) 91 559 72 22

[email protected] www.pandorafms.com