DOCSLIB.ORG

Boring Tools Cutting Tools Drain Cleaning Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Boring Tools Cutting Tools Drain Cleaning Tools toolstools Plumbing maintenance electrical hardware CONSTRUCTION & bUILDING sUPPLIES Tools lawn & garden janitorial BORING TOOLS automotive CUTTING TOOLS DRAIN CLEANING TOOLS FASTENING TOOLS Paint & sundries New Items FINISHING TOOLS In Red LAYOUT TOOLS MEASURING TOOLS INDUSTRIAL POWER TOOLS STRIKING TOOLS safety equipment Page 187 tools Plumbing maintenance electrical hardware CONSTRUCTION & bUILDING sUPPLIES Tools lawn & garden janitorial automotive Paint & sundries INDUSTRIAL safety equipment Phone (410) 485-3343 Toll Free 1-800-817-8183 Page 188 Fax (410) 325-2240 Online: www.millsupplyco.com tools boring tools Plumbing High Speed Steel Jobber Length Drill Bits : maintenance - General purpose jobber bit - Sold per each - Fractional Size electrical Item # U/M Size Decimal Flute Length Overall Length Quantity Per Pack M29558 Each 1/32” .0312 1/2” 1-3/8” 12 M29560 Each 3/64” .0469 3/4” 1-3/4” 12 M29561 Each 1/16” .0625 7/8” 1-7/8” 12 hardware M29563 Each 5/64” .0781 1-3/4” 2” 12 M29565 Each 3/32” .0938 1-1/4” 2-1/4” 12 M29567 Each 7/64” .1094 1-1/2” 2-5/8” 12 CONSTRUCTION & bUILDING M29569 Each 1/8” .1250 1-5/8” 2-3/4” 12 sUPPLIES M29571 Each 9/64” .1406 1-3/4” 2-7/8” 12 M29573 Each 5/32” .1562 2” 3-1/8” 12 M29575 Each 11/64” .1719 2-1/8” 3-1/4” 12 M29577 Each 3/16” .1875 2-5/16” 3-1/2” 12 Tools M29579 Each 13/64” .2031 2-7/16” 3-5/8” 12 M29581 Each 7/32” .2188 2-1/2” 3-3/4” 12 M29583 Each 15/64” .2344 2-5/8” 3-7/8” 12 lawn & M29585 Each 1/4” .2500 2-3/4” 4” 12 garden M29586 Each 17/64” .2656 2-7/8” 4-1/8” 12 M29587 Each 9/32” .2812 2-15/16” 4-1/4” 6 M29589 Each 19/64” .2969 3-1/16” 4-3/8” 6 M29591 Each 5/16” .3125 3-3/16” 4-1/2” 6 janitorial M29593 Each 21/64” .3281 3-5/16” 4-5/8” 6 M29595 Each 11/32” .3438 3-7/16” 4-3/4” 6 M29597 Each 23/64” .3594 3-1/2” 4-7/8” 6 automotive M29599 Each 3/8” .3750 3-5/8” 5” 6 M29601 Each 25/64” .3906 3-3/4” 5-1/8” 6 M29603 Each 13/32” .4062 3-7/8” 5-1/4” 6 M29605 Each 27/64” .4219 3-15/16” 5-3/8” 6 Paint & M29607 Each 7/16” .4375 4-1/16” 5-1/2” 6 sundries M29609 Each 29/64” .4531 4-3/16” 5-5/8” 6 M29611 Each 15/32” .4688 4-5/16” 5-3/4” 6 M29613 Each 31/64” .4844 4-3/8” 5-7/8” 6 M29615 Each 1/2” .5000 4-1/2” 6” 6 INDUSTRIAL safety equipment Phone (410) 485-3343 Toll Free 1-800-817-8183 Fax (410) 325-2240 Online: www.millsupplyco.com Page 189 tools Plumbing boring tools 29 Piece High Speed Steel 13 Piece High Speed Steel Jobber Length Drill Bit Set : Jobber Length Drill Bit Set : maintenance - With metal index - With plastic storage case - 1/16” to 1/2” by 64ths - 1/16” to 1/4” by 64ths electrical hardware Item # M29213 Item # M29212 U/M - Each U/M - Each CONSTRUCTION & bUILDING sUPPLIES Paddle Spade Bits : Paddle Bit Extension : - Wood Cutting Bit - 1/4” hex w/1/4” round shank - Sold per each - Sold per each Tools - 6” long steel - 12” long steel - 2 set screws hold bit securely - Includes allen wrench lawn & Item # U/M Size garden M29182 Each 1/4”** M29183 Each 5/16”** M29184 Each 3/8”*** M29185 Each 7/16”** janitorial M29186 Each 1/2”*** M29187 Each 9/16”** M29188 Each 5/8”*** M29189 Each 11/16”** automotive M29190 Each 3/4”*** M29191 Each 13/16”** M29192 Each 7/8”*** Paint & M29193 Each 15/16”** sundries M29194 Each 1”*** M29195 Each 1-1/8” M29196 Each 1-1/4” M29197 Each 1-3/8” INDUSTRIAL M29198 Each 1-1/2” M29199 Pack 6pc*** M29200 Pack 13pc** Item # M24793 U/M - Each safety equipment Phone (410) 485-3343 Toll Free 1-800-817-8183 Page 190 Fax (410) 325-2240 Online: www.millsupplyco.com tools boring tools Plumbing Cobalt Drill Bits : - 135 degree split point - Made of high speed cobalt steel maintenance - High abrasion resistance - Web construction adds to long life of these bits. (Used for drilling through metal) - Sold by each electrical - Fractional size Item # U/M Size Decimal Flute Length Overall Length Quantity Per Pack M29383 Each 1/64” .0156 3/16” 3/4” 12 M29384 Each 1/32” .0312 1/2” 1-3/8” 12 hardware M29385 Each 3/64” .0469 3/4” 1-3/4” 12 M29386 Each 1/16” .0625 7/8” 1-7/8” 12 M29387 Each 5/64” .0781 1-3/4” 2” 12 CONSTRUCTION M29388 Each 3/32” .0938 1-1/4” 2-1/4” 12 & bUILDING sUPPLIES M29389 Each 7/64” .1094 1-1/2” 2-5/8” 12 M29390 Each 1/8” .1250 1-5/8” 2-3/4” 12 M29391 Each 9/64” .1406 1-3/4” 2-7/8” 12 M29392 Each 5/32” .1562 2” 3-1/8” 12 Tools M29393 Each 11/64” .1719 2-1/8” 3-1/4” 12 M29394 Each 3/16” .1875 2-5/16” 3-1/2” 12 M29395 Each 13/64” .2031 2-7/16” 3-5/8” 12 lawn & M29396 Each 7/32” .2188 2-1/2” 3-3/4” 12 garden M29397 Each 15/64” .2344 2-5/8” 3-7/8” 12 M29398 Each 1/4” .2500 2-3/4” 4” 12 M29399 Each 17/64” .2656 2-7/8” 4-1/8” 12 M29400 Each 9/32” .2812 2-15/16” 4-1/4” 12 janitorial M29401 Each 19/64” .2969 3-1/16” 4-3/8” 6 M29402 Each 5/16” .3125 3-3/16” 4-1/2” 6 M29403 Each 21/64” .3281 3-5/16” 4-5/8” 6 M29404 Each 11/32” .3438 3-7/16” 4-3/4” 6 automotive M29405 Each 23/64” .3594 3-1/2” 4-7/8” 6 M29406 Each 3/8” .3750 3-5/8” 5” 6 M29407 Each 25/64” .3906 3-3/4” 5-1/8” 6 Paint & M29408 Each 13/32” .4062 3-7/8” 5-1/4” 6 sundries M29409 Each 27/64” .4219 3-15/16” 5-3/8” 6 M29410 Each 7/16” .4375 4-1/16” 5-1/2” 6 M29411 Each 29/64” .4531 4-3/16” 5-5/8” 6 M29412 Each 15/32” .4688 4-5/16” 5-3/4” 6 INDUSTRIAL M29413 Each 31/64” .4844 4-3/8” 5-7/8” 6 M29414 Each 1/2” .5000 4-1/2” 6” 6 safety equipment Phone (410) 485-3343 Toll Free 1-800-817-8183 Fax (410) 325-2240 Online: www.millsupplyco.com Page 191 tools Plumbing boring tools * Many other drill bits are available that are Masonry Bits : not pictured in this catalog. (Contact your sales representative for more information). maintenance - Wide Spiral - Carbide tipped - For use on brick, block, tile, stone, cement and mortar, marble and electrical fiberglass - Sold per each Item # U/M Size Length hardware 5pc Masonry Bit Set : M29701 Each 1/8” 3” M29706 Each 3/16” 4” - For rotary drilling in dry concrete, masonry, brick M29710 Each 1/4” 4” and tile CONSTRUCTION M29711 Each 1/4” 6” - Carbide tipped for long & bUILDING life sUPPLIES M29712 Each 5/16” 4” - Includes; 3/16”x3”, M29713 Each 5/16” 6” 1/4”x4”, 5/16”x4”, M29714 Each 3/8” 4” 3/8”x4”, 1/2”x4” M29715 Each 3/8” 6” Item # M29207 Tools M29718 Each 1/2” 6” U/M - Each lawn & Percussion Masonry garden “Hammer” Bits : - Carbide tipped for cement, block, brick, and mortar janitorial - Sold per each automotive Item # U/M Size Drilling Depth Item # U/M Size Drilling Depth Shank Dia. M29498 Each 1/8” x 3” 1-1/2” M29511 Each 5/16” x 4” 1-1/2” 9/32” M29499 Each 1/8” x 6” 4-1/2” M29512 Each 5/16” x 6” 4-1/2” 9/32” M29500 Each 5/32” x 3” 1-1/2” M29513 Each 3/8” x 4” 1-1/2” 11/32” Paint & M29501 Each 5/32” x 6” 4-1/2” M29514 Each 3/8” x 6” 4-1/2” 11/32” sundries M29502 Each 11/64” x 3” 1-1/2” M29515 Each 7/16” x 6” 4-1/2” 3/8” M29503 Each 3/16” x 4” 2-1/2” M29516 Each 15/32” x 6” 4-1/2” 3/8” M29504 Each 3/16” x 6” 4-1/2” M29517 Each 1/2” x 6” 4-1/2” 3/8” M29505 Each 7/32” x 3” 1-1/2” M29518 Each 9/16” x 6” 4-1/2” 3/8” M29506 Each 7/32” x 6” 4-1/2” M29519 Each 5/8” x 6” 4-1/2” 1/2” M29507 Each 1/4” x 4” 2-1/2” M29520 Each 11/16” x 6” 4-1/2” 1/2” INDUSTRIAL M29508 Each 1/4” x 6” 4-1/2” M29521 Each 3/4” x 6” 4-1/2” 1/2” M29509 Each 9/32” x 4” 2-1/2” M29522 Each 7/8” x 6” 4-1/2” 1/2” M29510 Each 9/32” x 6” 4-1/2” M29523 Each 1” x 6” 4-1/2” 1/2” safety equipment Phone (410) 485-3343 Toll Free 1-800-817-8183 Page 192 Fax (410) 325-2240 Online: www.millsupplyco.com tools boring tools Plumbing Hole Saws : Arbor Extension : - Cuts holes in wood, plastic, or any machinable - 12” shank for 7/16” arbors metal including: nail-embedded wood, plywood, - Sold per each maintenance pipe, stainless steel, etc.
Load more

Recommended publications
  • TOOLS and EQUIPMENT Orthotic 561
    TOOLS AND EQUIPMENT Orthotic 561 Tools Shoe Stretchers............................562 Brannock Measuring Device..................562 Mixing Bowls ..............................562 Aluminum Cast Mandrels ....................562 Laminating Fixtures.........................563 Vises and Yates Clamps.................563-564 Measuring Devices .....................564-567 Hex Sets and Balldrivers.................567-569 Screw and Drill Gages ......................569 Cutting Nippers ............................570 Plastering Tools............................571 Shears and Scissors ....................571-572 Blades, Knives and Surforms .............572-575 Rivets, Punch Sets and Eyelets ...........576-579 Reamers .................................579 Needle Kit ................................579 Deburring Tool.............................579 Rout-A-Burr ...............................579 Precision Oiler.............................580 Countersinks ..............................580 Adjustable Bits.............................580 Tools Ball Set Tool . 580 Micro Torches and Heat Guns ............580-582 Cast Spreaders and Cutters ..............583-584 Alignment Fixtures .........................584 Benders and Contouring Iron .............584-585 Equipment Carvers, Cutters and Routers.............585-588 Sanding Accessories............ 589-591, 601-603 Sewing and Patching Machines ...............592 Drill Press ................................593 Band Saws . .594-595 Dust Collectors ........................596-597
    [Show full text]
  • You Want It... Smiths Hire It! Smithshire.Com • 0800 783 0270
    TOOLS • PLANT • ACCESS • PLATFORMS TRADE CREDIT ACCOUNTS WITHIN HOURS (Subject to satisfactory references) FREE DEMONSTRATIONS & INSTRUCTIONS Advice and safety with every hire DELIVERY SERVICE AVAILABLE Across the Northwest You Want It... Smiths Hire It! smithshire.com • 0800 783 0270 © 2012. Smiths Equipment Hire Ltd. All rights reserved. Information is correct at date of publish and could change at any time without warning. TOOLS • PLANT • ACCESS • PLATFORMS Access Equipment & Ladders & Steps Hydraulic Access Platforms Alloy Towers - One Week Minimum Hire Period Alloy Extension Ladders - 2Sec 3.4m 2.5m, 3.0m, 3.5m 4.4m 4.0m-4.5m 5.4m 5.0m, 5.5m, 6.0m 6.4m 6.0m Rope Operated 7.4m Alloy Towers are Specified by Guardrail Height Alloy Extension Ladders - 3Sec 8.4m Prices apply to 1.8m & 2.7m length in both 2.5m Push Up 9.4m 0.8m Narrow and 1.4m Standard widths 3.0m Push Up 10.4m 3.5m Push Up 11.4m 4.0m Push Up 12.4m [Standard 1.4m Width Only] 4.5m Rope Operated 13.4m [Standard 1.4m Width Only] 6.0m Rope Operated Road Tow Hydraulic Platforms Alloy Extension Ladders - 3Sec Combi 9.0m Hyd. Access Platform Trailer Mtd. 2.2m 12.0m Hyd. Access Platform Trailer Mtd. 2.7m 15.0m Hyd. Access Platform Trailer Mtd. 3.6m 17.0m Hyd. Access Platform Trailer Mtd. Roof Ladders Small Self Propelled Platforms 3.6m 4.5m Power Tower Nano 4.0m 5.0m Power Tower 4.5m 6.0m SP Mast Boom Platform (STAR 6) 5.5m 8.0m SP Mast Boom Platform (Toucan) 6.0m 10.0m SP Mast Boom Platform (STAR 10) Telescopic Ladder - 0.74m To 3.5m Self Propelled Hydraulic Scissor Platforms
    [Show full text]
  • 05/29/18 Tools & Home Improvement Auction
    09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D.
    [Show full text]
  • CONSTRUCTIONCONSTRUCTION && Plumbing
    CONSTRUCTIONCONSTRUCTION && Plumbing BUILDINGBUILDING SUPPLIESSUPPLIES maintenance electrical ACCESS PANELS New Items CAULKING In Red CARPET BARS hardware CEILING TILE CONSTRUCTION ADHESIVES CONSTRUCTION DOORS & bUILDING FASTENERS sUPPLIES HOUSEHOLD GLUES PATCHING & REPAIR POLYETHYLENE Tools ROOF & DRIVEWAY REPAIR WEATHERSTRIP & THRESHOLDS lawn & garden janitorial automotive Paint & sundries INDUSTRIAL safety equipment Page 153 CONSTRUCTION & bUILDING sUPPLIES Plumbing maintenance electrical hardware CONSTRUCTION & bUILDING sUPPLIES Tools lawn & garden janitorial automotive Paint & sundries INDUSTRIAL safety equipment Phone (410) 485-3343 Toll Free 1-800-817-8183 Page 154 Fax (410) 325-2240 Online: www.millsupplyco.com CONSTRUCTION & bUILDING sUPPLIES TAPES & ADHESIVES Plumbing General Purpose Masking Tape : 3M Blue Painter’s Tape : Duct Tape : - General Purpose - Removes cleanly and - Cloth duct tape maintenance - For masking metal, easily for up to 14 days - General Purpose without leaving adhesive - Waterproof coated wood or paper residue - 2” x 60 yd. roll - Can be used on any - For painted walls and - Duct tape is suitable for use on any clean dry surface trim, woodwork, glass surface for permanent or temporary - 60 yd. rolls and metal application electrical - Use with water base and solvent based coatings - 60 yd. rolls Item # U/M Size Item # U/M Size hardware M10084 Roll 1” M10099 Roll 1” M10090 Roll 2” M10101 Roll 1-1/2” Item # M10105 M10096 Roll 3” M10100 Roll 2” U/M - Roll CONSTRUCTION Aluminum Foil Tape : Electrical Tape : 3M Electrical Tape : & bUILDING sUPPLIES - Weatherproof tape for repairing - All purpose tape / .7mil - Scotch Super 33+ rainspouts, gutters and other metal - UL listed Vinyl Electrical Tape products including duct - Suitable for use at not more - UL listed.
    [Show full text]
  • Bay Country Rentalsbaybay Countrycountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY
    BayBay CountryCountry RentalsBay Country RentalsBayBay CountryCountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY OF PASADENA, INC. 410-437-5660 www.baycountryrentalsofpasadena.com 8017 Ft. Smallwood Road Baltimore, Maryland 21226 8017 Ft. Smallwood Rd. Bay Country Rentals of Pasadena, Inc. (Next to 84 Lumber Co.) Bay Country Rentals Bay Country Rentals 410-437-5660 410-437-5660 Terms and Conditions Ready Mixed Concrete Job Too Small? Rental Period We sell as little as 1/4 yard at a time Minimum: Any 4 hour period during business hours, except where a shorter minimum is indicated. Job Too Big? Overnight: Any weekday after 4 p.m. until 8 a.m. the fol- Take only the amount you can handle at one time lowing morning is considered a 4 hour minimum. Day: Any weekday, 24 hours from the time the item is Hard To Get At? rented. Our special trailer can get into that tight spot. Weekend: Friday – after 4 p.m. until 8 a.m. Monday morning is Ready To Pour? considered a 2 day rate. No mixing -- No messing. Saturday – 7:30 opening until 5:30 p.m. is consid- ered 1 day rate. How Much Do I Need? Saturday – noon until 8 a.m. Monday morning is Call for free estimate 1 considered 1 /2 day rate. Just drive in. Haul it away. We provide a self-dumping Saturday – after 4 p.m. until 8 a.m. Monday morning trailer with manually operated dump system 1-2 yard is considered a 1 day rate. capacity.
    [Show full text]
  • Power Tool Accessories and Hand Tools
    Power Tool Accessories and Hand Tools IVY Classic Industries, Inc. PC1010 40 Plain Avenue • New Rochelle, NY 10801 USA Tel: 914-632-8200 Fax: 914-632-6449 800-435-3867 800-552-2997 www.ivyclassic.com e-mail: [email protected] IVY Classic Industries, Inc. We Meet Your Needs IVY Classic is dedicated to manufacturing a comprehensive, high-quality line of power tool accessories and hand tools for the contracting, industrial and DIY markets. All our tools are subject to strict quality-control procedures From Our to ensure they meet our exacting Humble standardsstandards.. Beginning We continually update our package IVY Wrought Iron Works designs to help you effectively was established in 1929 by promote IVY Classic products. an English blacksmith named We use the latest in packing Albert George Story. Many of his materials, and our product cards original tools are on display at are bar coded and clearly labeled IVY Classic Industries. Originally with valuable information to make the name IVY was chosen as it any job easier. was made up of three letters that were all straight lines. These We are very proud of our straight letters could easily be complete assortment of display cut into any IVY product before merchandisers throughout the the company could afford a product line. Our merchandisers steel letter punch. Today IVY are carefully arranged to include Classic Industries is still the best-selling items in an a family-owned-and-operated organized, space-saving layout. business continuing the traditions of Mr. Albert George Story. We Set Very High Standards 2 IVY Classic Industries, Inc.
    [Show full text]
  • Building Materials
    BUILDING MATERIALS HAND & POWER TOOLS BUILDERS EQUIPMENT & CLEANING ELECTRICAL, LIGHTING & VENTILATION LANDSCAPING & FENCING FLOORING & TILING ROOFING PLUMBING & HEATING PAINTING & DECORATING PLASTICS & DRAINAGE DOOR FURNITURE, IRONMONGERY & LOCKS SCRESealaWS,n NAILSts & A&dhesi FIXINGSves SAFETY WEARBath &rooms CLOTHING SEALANTS & ADHESIVES BATHROOMS om www.800benaa.c call us FREE click & Collect FREE Delivery Within 4Hrs HOW WE CAN HELP YOU ... BUY ONLINE Save time, buy online! Visit 800benaa.com to place orders, and check prices and stock. FREE click & Collect We have made the buying process more easy than ever. you are just few clicks away from your required products. You just have to click on your prod- uct, write down the quantity, click on add to cart, put your billing information and checkout. We will deliver your products at your desktop within 4 hrs FREE Delivery Within 4Hrs We are the first one in the market who provides delivery of ll building materi- als to your doorstep. You can get your products at your site or any location. we also provide customer support for our clients if they have any query call us Get started now at www.800benaa.com www.800benaa.com BUILDING MATERIALS www.800benaa.com BUILDING MATERIALS CONCRETE BLOCKS 0 CEMENT 0 CEMENT ADDITIVES & DYES 0 AGGREGATE 0 PVC & HDPE 0 BLOCK & PLASTER ACCESSORIES 0 0 0 WEATHER & WATERPROOFING BUILDERS METALWORK TONS OF STOCK AT TRADE PRICES CONCRETE BLOCKS 4 INCH HOLLOW BLOCK 6 INCH HOLLOW BLOCK Block dimensions: Block dimensions: 400 mm x 100 mm x 200 mm 400 mm x 150 mm
    [Show full text]
  • Tools and Their Uses NAVEDTRA 14256
    NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. NAVAL EDUCATION AND TRAINING PROGRAM MANAGEMENT SUPPORT ACTIVITY PENSACOLA, FLORIDA 32559-5000 ERRATA NO. 1 May 1993 Specific Instructions and Errata for Nonresident Training Course TOOLS AND THEIR USES 1. TO OBTAIN CREDIT FOR DELETED QUESTIONS, SHOW THIS ERRATA TO YOUR LOCAL-COURSE ADMINISTRATOR (ESO/SCORER). THE LOCAL COURSE ADMINISTRATOR (ESO/SCORER) IS DIRECTED TO CORRECT THE ANSWER KEY FOR THIS COURSE BY INDICATING THE QUESTIONS DELETED. 2. No attempt has been made to issue corrections for errors in typing, punctuation, etc., which will not affect your ability to answer the question. 3. Assignment Booklet Delete the following questions and write "Deleted" across all four of the boxes for that question: Question Question 2-7 5-43 2-54 5-46 PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.
    [Show full text]
  • C a T a L O G 8
    CATALOG 802 THE ING IN D DU A S E T L R Y W I T H S T IN C U N D OV O ATIVE PR www.barwalt.com What’s New at We have great news! Since our last catalog, we have brought EVA technology into our North Idaho factory. EVA is tough waterproof foam that will not deteriorate or compress over time. We are now making three new products using this technology. The most recent one is the SET N SEAL® toilet bowl seal, which seals perfectly yet is repositionable. You’ll find details about this new product on page 34. Another great EVA product we have created is The Kneel Pad. This oversized, comfortable and tough kneel pad will not compress over time and lasts for years. It also makes a great seat cushion, and can be used for work or play. Details are on page 23. In addition, we have revived our lightest, toughest and mega comfortable Megalight Knee Pad also on page 23. These are so lightweight you may even forget you have them on! Great news! We can now offer you an even softer float than the Ultrasoft Float. The Megasoft Float, on page 19, is just as soft as the polyurethane types already on the market, but ours lasts much longer! We also have more options in the spacer and leveling system categories. First, we have added more sizes to the Spin Doctor line, as well as the new Torque Monster to make it even easier to use Spin Doctor.
    [Show full text]
  • Egyptian Glass Mosaic Installation
    Egyptian Glass Mosaic Step 1: Step: 6 Installation Use a white thin-set mortar (2- Apply each subsequent sheet so that component, flexible acrylic thin-set grout joints line up and a consistent mortar system) formulated for interior field is maintained. Before you Begin: and exterior wall installations. Using Prior to setting each sheet, check the Glass Mosaics may be installed on the flat side of a trowel to initiate the setting bed for skinning (slight drying interior or exterior wall areas, in wet or bond coat, firmly apply the setting of the thin set surface). If skinning dry locations (even in hot or cold material to the substrate. occurs, remove thin-set and repeat environments). Glass differs from steps 2 & 3. ceramic products, so extra caution Step 2: and attention to installation With additional setting material, using Step: 7 instructions is recommended. In a 3/16” x ¼” V-Notch trowel, comb To unify the tile surface from one every case glass tiles should not be horizontal, full notches in one direction sheet to the next, use a wooden exposed to high abrasion, high impact to establish the proper depth of the beating block and hammer, again and thermal shock or installed over setting bed. lightly tapping from one sheet to the flexible surfaces. next. Important –Since any crack in a glass Step 3: tile is very visible, the use of a crack Using the flat side of the trowel, flatten Step: 8 suppression membrane is the notches to achieve a smooth, After 15 – 30 minutes (floors can be recommended when installed over a consistent setting bed approximately removed sooner) lightly wet paper mortar bed (except when used as an 1/8” thick.
    [Show full text]
  • Download Manual
    INDUSTRIAL TILE AND PAVER APPLICATIONS TECHNICAL DESIGN MANUAL LATICRETE Technical Services Department Globally Proven Construction Solutions Cover Photo: Vintage copper kettle in brewery - Belgium Photo Courtesy of Tatiana Popova © 1998, 2011, 2020 LATICRETE International, Inc. All rights reserved. No part of this publication (except for previously published articles and industry references) may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the written per- mission of LATICRETE International, Inc. The information and recommendations contained herein are based on the experience of the author and LATICRETE International, Inc. While we believe the information presented in these documents to be correct, LATICRETE International and its employees assume no responsibility for its accuracy or for the opinions expressed herein. The information contained in this publication should not be used or relied upon for any specific application or project without competent examination by qualified professionals and verification of its accuracy, suitability, and applicability. Users of information from this publication assume all liability arising from such use. Industrial Tile and Pavers Applications– Technical Manual ©2020 LATICRETE International, Inc. 2 Industrial Tile and Paver Applications – Technical Design Manual Contents SECTION 1 INTRODUCTION ....................................................................................................................................9 1.1 Preface 1.2 Industrial
    [Show full text]
  • Luxcella Pronto! Porcelain Plank Installation Guidelines
    Luxcella Pronto! Porcelain Plank Installation Guidelines THANK YOU FOR CHOOSING PRONTO FLOORING. When properly installed and cared for, your new flooring will be easy to maintain and will keep its great look for many years. If you have questions or comments, please visit us at www.thematworks.com or call our Customer Relations and Technical Services at 1-800-523-5179. TOOLS REQUIRED: 1.) Ceramic Tile Cutter 2.) Utility Knife w/spare blades 3.) Chalk-line 4.) Carpenter Square & Straight Edge 5.) Tape Measure 6.) Felt-tip marker or pencil 7.) Wet saw or tile cutter with diamond blade for cutting porcelain 8.) Grinder w/stone wheel (for repairs) 9.) Vacuum and spray bottle (for repairs) 10.) Hand Scraper (for repairs) General Information Prior to Installation Recommended Use • Residential and light commercial applications. • Interior use in enclosed, climate controlled areas. • Do not install over ramps, stairs or steps. • You may want to consider glue-down installation if any of these conditions exist in your home: uneven floor surfaces, large temperature changes, heavy traffic, or large floor plan (larger than 750 sq. ft. continuous). In these cases, an approved flooring adhesive should be applied to the surface between the subfloor and the Pronto plank. Storage and Handling • All Pronto flooring shall be stored in a climate controlled, enclosed location protected from the weather. Area shall be clean and dry. Ideal storage temperature shall be between 65°F (18°C) and 100°F (38°C). Humidity shall be maintained between 40% and 70%. • Pronto flooring shall be stored horizontally on a flat, dry level surface.
    [Show full text]