Case Study VI* - The Upper Tietê Basin,

* This case study was prepared by Roberto Max Hermann and Benedito Pinto Ferreira Braga Jr

VI.1 Introduction

The São Paulo Metropolitan area, located in the Upper Tietê River basin, comprises 38 cities in addition to the city of São Paulo. The spectacular growth that has occurred in this area has been accompanied by an enormous increase in population and associated serious environmental problems related to water pollution. The water supply system provides about 60 m3 s-1 for this area, about 80 per cent of which is returned untreated to the main water courses. Water quality problems are compounded by the fact that the rivers form part of a system designed exclusively for electric power generation. This system requires the flow to be reversed and, consequently, a mixture of untreated wastewater and the natural river flow remain permanently within the boundaries of the metropolitan area.

Public outcry has forced the State of São Paulo government to take action towards improving the environmental quality of its waters. The Tietê Project was launched in 1991 with the ambitious goal of treating 50 per cent of the total wastewater by 1996. This goal would be accomplished with three new wastewater treatment plants, with the expansion of an existing plant and with the implementation of several others accessory works, such as sewer collection networks and interceptors. As part of this project, industries are also required to comply with emission standards set in 1976 and which have never before been enforced.

VI.2 The metropolitan region of São Paulo

The metropolitan region of São Paulo (Figure VI.1), which includes the city of São Paulo and 38 adjacent cities, occupies 8,000 km2 of which 900 km2 is urbanised. The whole area is situated about 700 m above sea level and is mostly part of the Upper Tietê basin. The Tietê River is the largest river in the State. Figure VI.1 Location map of Brazil showing the Upper Tietê basin, State of São Paulo, Brazil

The present population of the area is about 16 million and is estimated to reach about 19 million by the year 2000. In 1880 the population was about 4,000, increasing to 200,000 in 1930, 1 million in 1940 and 6.5 million in 1970. This growth is also reflected in the urbanised area which, in 1880, was 2 km2, growing to 130 km2 in 1940 and 420 km2 in 1954. In addition, the demand for municipal water supply is growing exponentially, from 5 m3 s-1 in 1940 to a projected 65 m3 s-1 by the year 2000 (Figure VI.2).

This region has the largest urban concentration in the whole of and the largest industrial complex in Latin America. The industrial output is 27 per cent of the national total and 62 per cent of the State total. The motivation for this rapid development arose during the 1940s in an effort to substitute imported goods with indigenous products. The consequences of this level of production and the concurrent population increase are a high population density (0.1 per cent of the total country area is occupied by 12 per cent of the total population), a high energy demand of 7,000 MW (25 per cent of the total Brazilian demand) and, especially, through several problems of conflicts over water use. The fast industrial development has resulted in rapid urbanisation, demanding electric power generation, water supply and flood control. A lack of capital resources has induced serious environmental problems. Only 10 per cent of the total sewage is treated at secondary level and, as a consequence, the urban rivers are highly polluted with a variety of industrial and municipal wastes.

Figure VI.2 Past and projected growth in population and water supply in the São Paulo region

VI.3 Pre-intervention situation

Geography and history have been influential in shaping early water resources development in the São Paulo metropolitan area. The first large hydraulic project was conceived purely for the purpose of generating hydroelectricity and stemmed from the need to supply cheap energy for industry. The system was designed to take advantage of a hydraulic head of about 700 m and was completed in the late 1950s (Figure VI.3). It includes several dams, two pumping stations that reverse the flow direction of the Pinheiros river, and two power plants located at the foothills of , at sea level.

The implementation of this system resulted in very low velocities in the Pinheiros and Tietê rivers, which between them receive almost all the sewage generated in the region. Only about 10 per cent of this sewage is treated at the secondary level and, therefore, severe environmental problems were experienced. The complexity of the system grew as the need to increase municipal water supplies resulted in some of the reservoirs (originally planned for hydroelectric generation, e.g. the Guarapiranga reservoir) being used to supply water. The untreated sewage, flowing through the main channels, was then used for power generation. Figure VI.3 Configuration of the first hydroelectricity generation system in the Tietê basin

Several attempts have been made in the past to control water pollution in this river basin. As early as 1953 a plan involving the construction of six wastewater treatment plants at secondary level was proposed by the city of São Paulo. Many other plans have been proposed, but in the late 1980s and early 1990s construction started on the gigantic SANEGRAN Project. This project included, among other features, a wastewater plant with a final treatment capacity of 63 m3 s-1.

At present, the main rivers in the region receive a daily discharge of about 1,200 t organic load and 5 t inorganic load. Of these, about 370 t d-1 organic load and the entire 5 t d-1 inorganic load are believed to be generated by industry.

VI.4 The Tietê Project

Public outcry against the problems caused by the very poor environmental quality of the water bodies in the area reached a climax during the late 1980s. The media played a very important role in organising several objections against the degradation; a petition to the State Government demanding action had over one million signatures.

In September 1991, the State Government launched the Tietê Project, to clean up the rivers and reservoirs of the São Paulo area. Two publicly owned companies are involved in this process: • Companhia de Saneamento Basico de São Paulo (SABESP) which is a utility company responsible for planning, building and operating the water supply and sewage systems in the state of São Paulo, including the São Paulo metropolitan area.

• CETESB (Companhia de Tecnologia de Saneamento Ambiental) which is in charge of environmental control at the state level.

To manage the Tietê Project, the government of the State of São Paulo created, by a special decree, a task force with selected professionals from both of these companies and six other State departments. The directive committee is chaired by the State Governor himself.

The Tietê Project began with a master plan for sewage collection and disposal which had been prepared during the period 1983-87. Under this plan, five wastewater treatment plants were considered with a total capacity of 53.2 m3 s-1. This first plan was reviewed and updated to increase the treatment capacity. Three new treatment plants were also designed and one of the existing plants was considerably enlarged. All five plants use the activated sludge treatment method. Sewer collection networks and interceptors were also enlarged. Figure VI.4 shows the Tietê Pollution Abatement plan as it is being implemented.

The Tietê Project is funded by a loan from the InterAmerican Development Bank (IADB) of about US$ 450 million and matching funds provided by the State of São Paulo of US$ 600 million over the three years from 1994 to 1996. During this period, the industries, which are being enforced through a special programme co-ordinated by CETESB, have invested about US$ 200 million in the implementation of treatment systems. The operating costs are also being met by the industries.

VI.5 Industrial wastewater management

Brazilian law requires industries to discharge their wastewater into the public sewer network whenever feasible. With the expansion of the collection system, a large number of new industries connected their sewage outlets to the public network and, as a result, overloaded the treatment plants. To avoid such problems and to preserve the treatment process, all industries are required to comply with permits issued against strict standards. As the agency in charge of environmental control at the state level, CETESB is responsible for enforcing state laws requiring permits for industrial effluent discharges into the collection system. Although this State Law, number 997, was passed in 1976 it was not strictly enforced until 1991. Starting in 1991, CETESB began a major programme to assess the industrial effluents of every industry located in the São Paulo metropolitan area. There are about 40,000 licensed industrial plants in the area but only 1,250 are believed to be responsible for about 90 per cent of the organic and inorganic loads. Based on information provided during the licensing procedure these 1,250 industries were selected for closer investigation. Intense negotiations were undertaken with all the 1,250 main polluters. They were asked to submit plans, and a schedule for implementing treatment plants, that would enable them to comply with the emission standards and permits required by the State Law 997. Figure VI.4 The Tietê Pollution Abatement Project

After collecting all the information, CETESB defined a system called STAR (Sistema de Tratamento de Águas Residuárias, or Wastewater Treatment System) which is an information protocol establishing the treatment processes for each industry together with the schedule for the implementation of the treatment and the permit system, under the agreement signed by CETESB and the industries. The information gathered under STAR was stored in a data bank at the CETESB headquarters.

Industries were supported through loans, which were provided if needed, and were drawn from funds from two different sources: CETESB itself, which was in charge of managing a special line of credit directly from the World Bank (PROCOP), and BNDES, a Brazilian federal agency conceived to help industries to improve their performance. During the implementation of the treatment systems, CETESB monitored the effluent discharges closely using mobile equipment and also the receiving water bodies at fixed points. Industries are gradually introducing self-monitoring and CETESB is establishing a compliance monitoring system, in order to check the results reported from the self- monitoring as an aid to the implementation of enforcement actions. This procedure is followed continuously thereby assuring long-term compliance with legal standards. The process is illustrated schematically in Figure VI.5.

Figure VI.6 shows the number of industries with effluent control at different stages by the end of September 1994 and Figure VI.7 shows the gradual increase in the number of industries which had achieved the effluent treatment targets set by CETESB. Of the 1,250 targeted industries, 1,007 had their treatment systems working satisfactorily. The resulting decrease in pollution loads between 1991 and 1994 are shown in Figure VI.8. The organic load of 370,000 kg BOD d-1 at the outset of the process was reduced to 150,000 kg BOD d-1 in September of 1994. The inorganic load decreased from 4,700 to 1,600 kg d-1.

Figure VI.5 Schematic representation of the pollution control process in the Tietê basin

Figure VI.6 Number of industries with effluent control at different stages by September 1994

Figure VI.7 Progress in the implementation of industrial effluent control, 1992-94

Figure VI.8 Decreases in industrial pollution loads resulting from the installation of effluent control, 1991-94

VI.6 Conclusions

This successful case study of industrial wastewater management and control illustrates the importance of public participation. Elected officials are particularly sensitive to public opinion, in order to satisfy their voters. From the late 1980s onwards, when citizens began protesting against the degradation of local water bodies, the permit system was enforced and compliance action began to take place. This was possible under a State law that was passed in 1976 but had never before been enacted.

In addition, many industries decided to support the programme, by adopting efficient treatment methods to promote pollution control, and also to win a better public image as a result of public pressure. Finally, it should be noted that credit was available, where and when necessary, which made the investment decisions much easier.

VI.7 References

CETESB 1994 Projeto Tietê, Despoluição Industrial. Relatório de Acompanhamento, Setembro 1994. Companhia de Tecnologia de Saneamento Ambiental, São Paulo.

Alonso, L.R. and Serpa, E.L. 1994 O Controle da Poluição Industrial no Projeto Tietê, 1994. Companhia de Tecnologia de Saneamento Ambiental (CETESB), São Paulo.