How to Use and Important Instructions Jiucer Mixer
Total Page:16
File Type:pdf, Size:1020Kb
HOW TO USE AND IMPORTANT INSTRUCTIONS JIUCER MIXER GRINDER_ERA For Juicing: 1. Take the main unit and put juicer body on the main unit. 2. Press fit the Juicing mesh on the motor coupler by slightly rotation until you hear a click sound. 3. Fit the juicer cover on the juicer body. 4. Lock both side swing locks. 5. Fit spout cover by sliding on juicer body. 6. Plug cord into AC outlet and use 1 st Speed for juicing. 7. Insert the fruits into the feeder tube and press them down gently with the help of food pusher. NOTE: • Run the Juicer at 1 st speed, to have maximum juicing efficiency from the juicer. • In addition for soft and citrus fruits it is advisable to insert fruits slowly and not pressing these by food pusher. For Blending: 1. This jar can be used for liquidizing of fruit juices, soups, cocktails, milk shakes, purees etc. 2. Fill the jar with the solids to be liquidized such as tomatoes. Fit the jar on the main unit. 3. Place the lid on the jar. 4. If needed water can be added. 5. Switch ON the mixer for one minute and you will get the finally blended juices and purees. 6. If ingredients need to be stirred during wet grinding of rice and dal batter. Stop mixer, insert spatula and stir. NOTE: • The minimum capacity of the jar is 1/3 jar and maximum capacity is 2/3 jar For Dry Grinding: 1. Small jar can be used for grinding black pepper, roasted coffee seeds, turmeric, coriander, red chilies etc. 2. Ensure that the jar is absolutely clean and dry. 3. Fill the jar with the ingredients. Place the lid on top on the jar and fit the jar on the main unit. NOTE: • Dry grinder jar should not be filled more than ½ of the total capacity. • During turmeric grinding first break it into smaller pieces before starting grinding operation. Over load Protector: The juicer mixer grinder is protected against the sudden overloads. In case such a situation does occur, your juicer mixer grinder will automatically turn off. To start the unit, please wait for 2-3 minutes to allow the motor to cool down and also remove the cause of overload. Press the button (Red) located at the bottom of the juicer mixer grinder to restart the unit. .