[email protected] www.cetecom.com

eCALL CERTIFICATION eCall is an automatic emergency call system for motor Annex IV - Co-existence of TPS and eCall vehicles postulated by the . Vehicle-mounted Annex V - Automatic triggering (document review) devices are designed to automatically report a traffic Annex VI - Positioning services (GNSS) accident to the single European emergency number 112, Annex VII - Info & warning signal (IVS self-test) and help to reduce the number of traffic jams and reduce Annex VIII - Privacy and data protection the severity of road traffic injuries by means of more rapidly initiated rescue operations. According to Regulation (EU) 2017/78 a declaration of conformity in accordance with the eCall standards listed in eCall will become mandatory for all new models of Regulation (EU) 2015/758 is required. passenger cars (M1) and light commercial vehicles (N1) starting from April 2018. CETECOM is accredited for these and other eCall standards and test specifications according to ISO/IEC 17025: CETECOM IS DESIGNATED AS TECHNICAL SERVICE ∙ CEN EN 16454 / ETSI TS 103 412 – eCall end to end FOR eCALL conformance testing CETECOM was officially designated as a technical ∙ ETSI TS 103 428 – eCall HLAP Interoperability testing service for eCall following an audit by the Federal ∙ ETSI TS 102 936-1, TS 151 010-1 and TS 134 123-1 – Motor Vehicle Authority (KBA). GSM/UMTS conformance ∙ ITU-T P.1140 – Speech communication requirements The designation as a technical service for eCall – for emergency calls according the scope defined by the Regulation (EU) 2017/79 – covers the full scope for an eCall type-approval for motor vehicles, eCall in-vehicle separate technical Thus, we offer our customers units and components: a complete eCall certification Annex I - High-severity deceleration test from a single source. Annex II - Full-scale impact test assessment +49 2054 9519 - 0 Annex III - Crash resistance of audio equipment [email protected]

ABOUT CETECOM For over twenty years, CETECOM has been renowned as an independent provider for test and certification services. With test labs in Europe, North America and Asia, CETECOM provides consulting, testing and certification for wireless technologies such as Cellular, Bluetooth, Wi-Fi, RFID, NFC, WPT and Radar. We furthermore perform a wide range of testing in the areas of EMC, Radio, mobile software applications, OTA, SAR, field trials, electrical safety and acoustics.

ENABLING MARKET ACCESS