DOCSLIB.ORG

Volume 3 of the Stormwater Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Volume 3 of the Stormwater Manual Volume 3: Project Stormwater Control CITY OF SEATTLE STORMWATER MANUAL AUGUST 2017 Note: Some pages in this document have been purposely skipped or blank pages inserted so that this document will copy correctly when duplexed. Volume 3 – Project Stormwater Control Table of Contents Table of Contents CHAPTER 1 – Introduction .............................................................................. 1-1 1.1. Purpose of this Volume ..................................................................... 1-1 1.2. How to Use this Volume .................................................................... 1-1 CHAPTER 2 – BMP Categories ........................................................................... 2-1 2.1. Introduction .................................................................................. 2-1 2.2. Soil Amendment ............................................................................. 2-2 2.3. Tree Planting and Retention .............................................................. 2-2 2.4. Dispersion BMPs ............................................................................. 2-2 2.5. Infiltration BMPs ............................................................................. 2-3 2.6. Rainwater Harvesting BMPs ................................................................ 2-3 2.7. Alternative Surface BMPs .................................................................. 2-4 2.8. Detention BMPs .............................................................................. 2-4 2.9. Non-infiltrating BMPs ....................................................................... 2-5 CHAPTER 3 – BMP Selection and Sizing Approach ................................................... 3-1 3.1. Determine Dispersion Feasibility ......................................................... 3-2 3.2. Determine Infiltration Feasibility ......................................................... 3-4 3.3. BMP Selection for On-site Stormwater Management .................................. 3-16 3.3.1. On-site List Approach ........................................................... 3-16 3.3.2. On-site Performance Standard ................................................ 3-18 3.4. BMP Selection for Flow Control .......................................................... 3-19 3.5. BMP Selection for Water Quality Treatment ........................................... 3-21 3.5.1. Selection Steps .................................................................. 3-21 3.5.2. Treatment Performance Goals and BMP Options ........................... 3-25 3.5.2.1. Oil Control Treatment .................................................... 3-25 3.5.2.2. Phosphorus Treatment .................................................... 3-26 3.5.2.3. Enhanced Treatment ...................................................... 3-26 3.5.2.4. Basic Treatment ........................................................... 3-28 CHAPTER 4 – General Design Requirements.......................................................... 4-1 4.1. Sizing Approach ............................................................................. 4-2 4.1.1. On-site List Approach ............................................................ 4-2 4.1.2. Pre-sized Approach .............................................................. 4-3 4.1.2.1. Pre-sized Facilities ......................................................... 4-3 4.1.2.2. Pre-sized Credits, Sizing Factors, and Equations ...................... 4-3 4.1.2.3. Pre-sized Calculator ........................................................ 4-5 4.1.3. Modeling Approach ............................................................... 4-6 4.1.3.1. On-site Performance Standard ........................................... 4-6 4.1.3.2. Flow Control................................................................. 4-6 4.1.3.3. Water Quality Treatment ................................................. 4-7 Stormwater Manual Directors’ Rule 17-2017, DWW-200 August 2017 i Table of Contents Volume 3 – Project Stormwater Control 4.2. Bypass General Design Requirements .................................................... 4-8 4.2.1. On-line vs. Offline Treatment BMPs ........................................... 4-8 4.2.2. Bypassing Flows Entering or Leaving a Site ................................... 4-8 4.2.2.1. Scenario 1 – Managing Flows Entering a Site ........................... 4-8 4.2.2.2. Scenario 2 – Managing Flows Entering a Site ........................... 4-9 4.2.2.3. Scenario 3 – Uncontrolled Flows Leaving the Site ..................... 4-9 4.3. Conveyance General Design Requirements ............................................. 4-10 4.3.1. Conveyance Design and Capacity Analysis ................................... 4-10 4.3.2. Approved Point of Discharge ................................................... 4-11 4.3.2.1. Requirements for Projects with No Off-site Point of Discharge .... 4-11 4.3.3. Conveyance Systems to Point of Discharge .................................. 4-13 4.3.4. Overflow Requirements ........................................................ 4-14 4.4. Presettling and Pretreatment Requirements........................................... 4-15 4.4.1. Description ....................................................................... 4-15 4.4.2. Performance Mechanisms ...................................................... 4-15 4.4.3. Applicability ...................................................................... 4-15 4.4.3.1. Presettling and Pretreatment ........................................... 4-15 4.4.3.2. Pretreatment ............................................................... 4-17 4.4.4. Site Considerations .............................................................. 4-18 4.4.5. Design Criteria ................................................................... 4-19 4.4.6. Operations and Maintenance Requirements ................................. 4-19 4.5. Infiltration BMPs ............................................................................ 4-20 4.5.1. Infiltration BMP Sizing .......................................................... 4-20 4.5.2. Soil Requirements for Water Quality Treatment ........................... 4-20 4.5.2.1. Underlying Soil Requirements for Infiltration BMPs .................. 4-21 4.5.2.2. Imported Soil and Sand ................................................... 4-21 CHAPTER 5 – BMP Design ................................................................................ 5-1 5.1. Soil Amendment BMP ....................................................................... 5-2 5.1.1. Description ........................................................................ 5-2 5.1.2. Performance Mechanisms ....................................................... 5-2 5.1.3. Applicability ....................................................................... 5-2 5.1.4. Site Considerations ............................................................... 5-3 5.1.5. Design Criteria .................................................................... 5-3 5.1.5.1. Implementation Options ................................................... 5-3 5.1.5.2. Soil Retention ............................................................... 5-4 5.1.5.3. Soil Quality .................................................................. 5-5 5.1.5.4. Soil Management Plan ..................................................... 5-6 5.1.6. BMP Sizing ......................................................................... 5-6 5.1.7. Minimum Construction Requirements ......................................... 5-6 5.1.8. Operations and Maintenance Requirements .................................. 5-6 5.2. Tree Planting and Retention .............................................................. 5-7 5.2.1. Description ........................................................................ 5-7 5.2.2. Performance Mechanisms ....................................................... 5-7 5.2.3. Applicability ....................................................................... 5-7 Directors’ Rule 17-2017, DWW-200 Stormwater Manual ii August 2017 Volume 3 – Project Stormwater Control Table of Contents 5.2.4. Site Considerations ............................................................... 5-7 5.2.4.1. Retained Trees .............................................................. 5-7 5.2.4.2. Newly Planted Trees ....................................................... 5-8 5.2.5. Design Criteria .................................................................... 5-8 5.2.5.1. Retained Trees .............................................................. 5-8 5.2.5.2. Newly Planted Trees ....................................................... 5-9 5.2.6. BMP Credits ...................................................................... 5-10 5.2.6.1. Credit for On-site List Approach ........................................ 5-10 5.2.6.2. Pre-Sized Approach for Flow Control ................................... 5-11 5.2.6.3. Modeling Approach for On-site Performance Standard and Flow Control ....................................................................... 5-11 5.2.7. Minimum Construction Requirements ........................................ 5-11 5.2.8. Operations and Maintenance Requirements ................................. 5-11 5.3. Dispersion BMPs ............................................................................ 5-13 5.3.1. Design Requirements for Dispersion BMPs ................................... 5-13
Load more

Recommended publications
  • Bioretention a Guide for Stormwater Retention & Water Quality Improvement Bioretention: a Guide for Stormwater Retention & Water Quality Improvement
    Bioretention A Guide for Stormwater Retention & Water Quality Improvement Bioretention: A Guide for Stormwater Retention & Water Quality Improvement Table of Contents BIORETENTION OVERVIEW 1 01. INTRODUCTION 3 02. CRITICAL PROCESSES OF BIORETENTION 3 03. BIORETENTION TYPES 4 A. Facility Performance Types 4 B. Commercial Bioretention Area Types 7 C. Residential Bioretention Area Types 8 D. Design Themes 13 04. DESIGN PHASES 13 A. Concept Phase 13 B. Engineering Design Phase 15 C. Engineering Plan Review Phase 20 D. Pre-Construction Phase 21 E. Construction Phase 21 F. Final Closeout Phase 21 G. Maintenance and Operation Phase 22 05. REFERENCES 22 Bioretention: A Guide for Stormwater Retention & Water Quality Improvement 1 Bioretention Overview BIORETENTION: DEFINITION & PURPOSE Suburban and urban development often creates a loss of natural land, negatively impacting natural aquatic systems through an increase of runoff and polluted waters. Bioretention is a regenerative upland-based water quality and quantity control practice that uses the physical, biological and chemical properties of plants, microbes and soils to remove pollutants from stormwater runoff. Bioretention facilities provide several benefits, including water quality improvements, environ- mental stewardship opportunities, aesthetic enrichment and wildlife habitat creation/preserva- tion. There are also various types of bioretention facilities that can be used in an area, and it is important to choose one that suits the particulars of the impacted site. When making a decision on the type of facility to be implemented, the land manager must consider both the aesthetic aspect and stormwater management needs. Bioretention can be used in both residential and industrial settings. The difference between the two is the scale of the design.
    [Show full text]
  • Bioretention Fact Sheet
    BIORETENTION FACT SHEET Bioretention is a shallow basin or landscaped depression designed to store, infiltrate and treat stormwater runoff. It is excavated and backfilled with well-draining, engineered soil media and planted with native vegetation, grasses or sod. Bioretention systems can also enhance habitat, mitigate for heat island effects and improve water quality. They are designed to temporarily hold (24 hours post rain event) BIORETENTION POLLUTANT REMOVAL1 and slowly infiltrate stormwater runoff. Bioretention systems use many pollutant removal mechanisms (i.e., infiltration, absorption, of suspended adsorption, evapotranspiration, microbial and biological 85% solids decomposition, plant uptake, sedimentation and filtration) to of phosphorus improve stormwater quality prior to it leaving the system. Filtered 80% runoff can exfiltrate into surrounding native soils, or these of nitrogen systems can be designed to use an underdrain to collect and return 60% filtered runoff to the conveyance system. Bioretention systems are of fecal coliform most effective when used to treat small to moderate quantities of 90% stormwater. 95% of metals As with any type of infrastructure, bioretention and other green infrastructure practices require maintenance to ensure continued functionality. Key maintenance activities include stabilizing erosion and removal of sediment, trash and debris, particularly if inlet or outlet structure openings are impeded. General inspections and assessment of five critical features can keep the practice operational. Visual clues for inspection can be used at any time, but it is ideal to inspect the bioretention system shortly after a moderately-sized rainfall event (~ 1 inch) and, again, 24-hours later to ensure runoff is entering the bioretention cell and infiltrating.
    [Show full text]
  • Design Standards for Stormwater Detention and Retention for Pima County
    Pima County Regional Flood Control District Design Standards for Stormwater Detention and Retention Supplement to Title 16, Chapter 16.48, Runoff Detention Systems Floodplain and Erosion Hazard Management Ordinance Pima County Regional Flood Control District 97 E. Congress St., 3rd Floor Tucson, AZ 85701-1791 (520) 724 -4600 June 2014 _________________ Design Standards for Stormwater Detention and Retention for Pima County REVISIONS Because of ongoing regulatory and technical changes in the fields of floodplain and stormwater management, revisions to this manual will be required from time to time. Such revisions will be approved by the Floodplain Administrator. Hard copy (printed) revisions will not be distributed. It is the holder’s responsibility to keep the document current by periodically checking the Regional Flood Control District’s web page for new digital versions. The revision history of the document is listed below. Chronology of Publication, Updates and Revisions Description Date First Edition June 2014 Chapter 6 Revised to Include Benefits of February 2015 Multiple-Use Basins I _________________ Design Standards for Stormwater Detention and Retention for Pima County TABLE OF CONTENTS No. Description Page No. 1. INTRODUCTION ................................................................................................. 1 1.1 Purpose ......................................................................................................................1 1.2 Ordinance Overview and Detention Requirements ..................................................2
    [Show full text]
  • Urban Water Management (ESRM 311 & SEFS 507)
    Urban Water Management (ESRM 311 & SEFS 507) Cougar Mtn Regional Wildland Park & Lakemont Blvd, Bellevue WA Lecture Today • Urban Water management terms • Examples of water management in urban areas • Field trip sites Urban Water Management terms • A retention basin is used to manage stormwater runoff to prevent flooding and downstream erosion, and improve water quality in an adjacent river, stream, lake or bay. Sometimes called a wet pond or wet detention basin, it is an artificial lake with vegetation around the perimeter, and includes a permanent pool of water in its design • A detention basin, sometimes called a "dry pond," which temporarily stores water after a storm, but eventually empties out at a controlled rate to a downstream water body. • Infiltration basin which is designed to direct stormwater to groundwater through permeable soils 3 Urban Water Management terms • Stormwater management pond is an artificial pond that is designed to collect and retain urban stormwater. They are frequently built into urban areas in North America to also retain sediments and other materials • Stormwater detention vault is an underground structure designed to manage excess stormwater runoff on a developed site, often in an urban setting. This type of best management practice may be selected when there is insufficient space on the site to infiltrate the runoff or build a surface facility such as a detention basin or retention basin.[1] Detention vaults manage stormwater quantity flowing to nearby surface waters. They help prevent flooding and can reduce erosion in rivers and streams. They do not provide treatment to improve water quality, though some are attached to a media filter bank to remove pollutants 4 Bioretention Basins Bioretention basins are landscaped depressions or shallow basins used to slow and treat on-site stormwater runoff.
    [Show full text]
  • Rain Garden, Bioswale, Micro-Bioretention
    Rain Garden, Bioswale, Micro-Bioretention What are rain gardens, bioswales, and micro- Basic Maintenance ... bioretention facilities? Regularly inspect for signs of erosion, obstructions, Rain gardens, bioswales, and micro-bioretention areas are or unhealthy vegetation. functional landscaping features that filter rainwater and Remove weeds and invasive plantings. improve water quality. Remove any trash in the bioretention area or the inlet Micro-bioretention areas are typically planted with native channels or pipes. plants and have three layers: mulch, a layer of soil, sand and Check the facility 48 hours after a rain storm to make organic material mixture, and a stone layer. A perforated sure there is no standing water. pipe within the stone layer collects and directs the filtered rainwater from large storms to a storm drain system so the facility drains within 2 days. Micro-bioretention areas are often located in parking lot islands, cul-de-sacs islands, or Seasonal Maintenance … along roads. Cut back dead stems from herbaceous plantings in the beginning of the spring season. Rain gardens are very similar to micro-bioretention. They collect rainwater from roof gutters, driveways, and sidewalks. Water new plantings frequently to promote plant growth Rain gardens are common around homes and townhomes. and also during extreme droughts. Replenish and distribute mulch to a depth of 3 inches. A bioswale is similar to a micro-bioretention area in the way it is designed with layers of vegetation, soil, and a perforated Remove fallen leaves in the fall season. pipe within the bottom stone layer. Bioswales typically are located along a roadway or walkway.
    [Show full text]
  • Bioretention for Infiltration (1004)
    Bioretention For Infiltration (1004) Wisconsin Department of Natural Resources Technical Standard I. Definition IV. Federal, State and Local Laws A bioretention device is an infiltration device1 Users of this standard shall be aware of applicable consisting of an excavated area that is back-filled with federal,state and local laws, rules, regulations or an engineered soil, covered witha mulch layer and permit requirements governingbioretention devices. planted with a diversity of woody and herbaceous This standard does not contain the text of federal, vegetation. Storm water directed to the device state or local laws. percolates through the mulch and engineered soil, where it is treated by a variety of physical, chemical V. Criteria and biological processes before infiltratinginto the native soil. A. Site Criteria II. Purpose 1. A site selected for construction of a bioretention device shall be evaluated in accordance with the A bioretention device may be applied individually or WDNR Technical Standard 1002, "Site as part of a system of stonnwater management Evaluation for Stonnwater Infiltration" and shall practices to support one or more of the following meet the site requirements of that standard. purposes: 2. The followings ite criteria shall also be met: • Enhance stonn water infiltration • Reduce discharge of storm water pollutants to a. Private Onsite Wastewater Treatment System surfacean_d ground waters (POWTS) - The bioretention device shall be • Decrease runoffpeak flowrates and volumes located a minimum of 50 feet from any • Preserve base flowin streams POWTS and shall not be hydraulically • Reduce temperature impacts of storm water connected to the POWTS dispersal cell or runoff cause negative impacts such as cross contamination.
    [Show full text]
  • Bioretention Basins/Rain Gardens
    Florida Field Guide to Low Impact Development Bioretention Basins/Rain Gardens Depiction of typical bioretention area design illustrating shallow slopes, well drained soil profile and location of plant material along hydrologic gradient. Basins with large catchments should include an over drain or provide a spillway in case of high flow event, and underdrains can be used in areas with low conductivity soils. Definition: Objectives: A bioretention area or rain garden is a shallow Bioretention basins/rain gardens retain, filter, and planted depression designed to retain or detain treat stormwater runoff using a shallow depression stormwater before it is infiltrated or discharged of conditioned soil topped with a layer of mulch downstream. While the terms “rain garden” and or high carbon soil layer and vegetation tolerant “bioretention basin” may be used interchangeably, of short-term flooding. Depending on the design, they can be considered along a continuum of size, they can provide retention or detention of runoff where the term “rain garden” is typically used to water and will trap and remove suspended solids describe a planted depression on an individual and filter or absorb pollutants to soils and plant homeowner’s lot, where the lot comprises the material. extent of the catchment area. Bioretention basins serve the same purpose but that more technical Overview: term typically describes larger projects in Bioretention basins can be installed at various community common areas as well as non- scales, for example, integrated with traffic calming residential applications. measures in suburban parks and in retarding basins. In larger applications, it is considered good practice to have pretreatment measures (e.g.
    [Show full text]
  • How Does Stormwater Biofiltration Work? | I
    Adoption Guidelines for Stormwater Biofiltration Systems Appendix A – How does stormwater biofiltration work? | i Fact Sheet: How does stormwater biofiltration work? What is biofiltration? Compared to undeveloped catchments, urban areas car parks, up to larger regional stormwater treatment systems, generate stormwater runoff that is magnified in flow including in public parks and forested reserves (Figure 2). volume, peak and pollutant load. The poor water quality Further, biofilter design can be tailored to optimise performance and altered hydrology are both highly detrimental to the for local conditions and specific treatment objectives. health of receiving waters (e.g. streams, estuaries, bays). Water biofiltration is the process of improving water quality A typical biofilter consists of a vegetated swale or basin by filtering water through biologically influenced media overlaying a porous, sand-based filter medium with a (Figure 1). Stormwater biofiltration systems (also known drainage pipe at the bottom. Stormwater is diverted from a as biofilters, bioretention systems and rain gardens) are kerb or pipe into the biofilter, where it flows through dense just one of a range of accepted Water Sensitive Urban vegetation and temporarily ponds on the surface before Design (WSUD) elements. They are a low energy treatment slowly filtering down through the filter media (Figure 1). technology with the potential to provide both water quality Depending on the design, treated flows are either infiltrated and quantity benefits. The technology can be applied to to underlying soils, or collected in the underdrain system various catchment sizes and landscape settings, from street for conveyance to downstream waterways or storages for trees and private backyards to street-scale applications and subsequent re-use.
    [Show full text]
  • Constructed Wetlands
    VA DEQ STORMWATER DESIGN SPECIFICATION NO. 13 CONSTRUCTED WETLAND VIRGINIA DEQ STORMWATER DESIGN SPECIFICATION No. 13 CONSTRUCTED WETLANDS VERSION 1.9 March 1, 2011 SECTION 1: DESCRIPTION Constructed wetlands, sometimes called stormwater wetlands, are shallow depressions that receive stormwater inputs for water quality treatment. Wetlands are typically less than 1 foot deep (although they have greater depths at the forebay and in micropools) and possess variable microtopography to promote dense and diverse wetland cover (Figure 13.1). Runoff from each new storm displaces runoff from previous storms, and the long residence time allows multiple pollutant removal processes to operate. The wetland environment provides an ideal environment for gravitational settling, biological uptake, and microbial activity. Constructed wetlands are the final element in the roof-to-stream runoff reduction sequence. They should only be considered for use after all other upland runoff reduction opportunities have been exhausted and there is still a remaining water quality or Channel Protection Volume to manage. Version 1.9, March 1, 2011 Page 1 of 30 VA DEQ STORMWATER DESIGN SPECIFICATION NO. 13 CONSTRUCTED WETLAND SECTION 2: PERFORMANCE The overall stormwater functions of constructed wetlands are summarized in Table 13.1. Table 13.1. Summary of Stormwater Functions Provided by Constructed Wetlands Stormwater Function Level 1 Design Level 2 Design Annual Runoff Volume Reduction (RR) 0% 0% Total Phosphorus (TP) EMC 50% 75% Reduction1 by BMP Treatment Process Total Phosphorus (TP) Mass Load 50% 75% Removal 1 Total Nitrogen (TN) EMC Reduction by 25% 55% BMP Treatment Process Total Nitrogen (TN) Mass Load 25% 55% Removal Yes.
    [Show full text]
  • Drainage Facility Public Works Surface Water Management Maintenance Guide May 2013
    9 Snohomish County Drainage Facility Public Works Surface Water Management Maintenance Guide May 2013 Snohomish County Public Works Surface Water Management Title VI and Americans with Disabilities Act (ADA) Information It is Snohomish County’s policy to assure that no person shall on the grounds of race, color, national origin, or sex as provided by Title VI of the Civil Rights Act of 1964, as amended, be excluded from participation in, be denied the benefits of, or otherwise be discriminated against under any County sponsored program or activity. For questions regarding Snohomish County Public Works’ Title VI Program, or for interpreter or translation services for non- English speakers, or otherwise making materials available in an alternate format, contact the Department Title VI Coordinator via e-mail at [email protected] or phone 425-388-6660. Hearing/speech impaired may call 711. Información sobre el Titulo VI y sobre la Ley de Americanos con Discapacidades (ADA por sus siglas en inglés) Es la política del Condado de Snohomish asegurar que ninguna persona sea excluida de participar, se le nieguen beneficios o se le discrimine de alguna otra manera en cualquier programa o actividad patrocinada por el Condado de Snohomish en razón de raza, color, país de origen o género, conforme al Título VI de la Enmienda a la Ley de Derechos Civiles de 1964. Comuníquese con el Department Title VI Coordinator (Coordinador del Título VI del Departamento) al correo electrónico [email protected], o al teléfono 425-388-6660 si tiene preguntas referentes al Snohomish County Public Works’ Title VI Program (Programa del Título VI de Obras Públicas del Condado de Snohomish), o para servicios de interpretación o traducción para los no angloparlantes, o para pedir que los materiales se hagan disponibles en un formato alternativo.
    [Show full text]
  • 4.5 Bioretention
    4.5. Bioretention (rain gardens) Bioretention Bioretention areas typically are landscaping features adapted to treat storm water runoff. Bioretention systems are also known as Mesic Prairie Depressions, Rain Gardens, Infiltration Basins, Infiltration Swales, bioretention basins, bioretention channels, tree box filters, planter boxes, or streetscapes, to name a few. Bioretention areas typically consist of a flow regulating structure, a pretreatment element, an engineered soil mix planting bed, vegetation, and an outflow regulating structure. Bioretention systems provide both water quality and quantity storm water management opportunities. Bioretention systems are flexible, adaptable and versatile storm water management facilities that are effective for new development as well as highly urban re-development situations. Bioretention can readily adapt to a site by modifying the conventional “mounded landscape” philosophy to that of a shallow landscape “cup” depression. Such landscape depression storage and treatment areas fit readily into: parking lot islands; small pockets of open areas; residential, commercial and industrial campus landscaping; and, urban and suburban green spaces and corridors. Bioretention works by routing storm water runoff into shallow, landscaped depressions. These landscaped depressions are designed to hold and remove many of the pollutants in a manner similar to natural ecosystems. During storms, runoff ponds above the mulch and Engineered Soil Mix in the system. Runoff from larger storms is generally diverted past the facility to the storm drain system. The runoff remaining in the bioretention facility filters through the Engineered Soil Mix. The filtered runoff can either be designed to enhance groundwater infiltration or can be collected in an underdrain and discharged per local storm water management requirements.
    [Show full text]
  • Volume V Runoff Treatment Bmps
    Snohomish County Drainage Manual Volume V Runoff Treatment BMPs September 2010 Table of Contents Chapter 1 - Introduction ................................................................................................... 1 1.1 Purpose of this Volume .................................................................................................. 1 1.2 Content and Organization of this Volume ..................................................................... 1 1.3 How to Use this Volume ................................................................................................ 1 1.4 Runoff Treatment Facilities ........................................................................................... 2 1.4.1 General Considerations ............................................................................................... 2 1.4.2 Maintenance ................................................................................................................ 2 1.4.3 Treatment Methods ..................................................................................................... 2 Chapter 2 - Treatment Facility Selection Process .......................................................... 4 Chapter 3 - Treatment Facility Menus ............................................................................ 5 Chapter 4 - General Requirements for Stormwater Facilities ...................................... 6 4.1 Design Volume and Flow .............................................................................................. 6 4.1.1
    [Show full text]