DOCSLIB.ORG

Application Lifecycle Management with Rational Products

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Application Lifecycle Management with Rational Products Front cover Collaborative Application Lifecycle Management with IBM Rational Products An IBM blueprint for Collaborative Application Lifecycle Management Green-thread reference scenario showing the Agility-at-Scale approach IBM Jazz products incorporated into an enterprise solution Mats Göthe Carolyn Pampino Philip Monson Khurram Nizami Katur Patel Brianna M. Smith Nail Yuce ibm.com/redbooks International Technical Support Organization Collaborative Application Lifecycle Management with IBM Rational Products December 2008 SG24-7622-00 Note: Before using this information and the product it supports, read the information in “Notices” on page xi. First Edition (December 2008) This edition applies to IBM Rational Build Forge Enterprise Edition 7.1, Rational ClearCase 7.1, Rational ClearQuest 7.1, Rational RequisitePro 7.1, Rational Quality Manager 1.0, Rational Requirements Composer 7.1, Rational Software Analyzer 7.0, and Rational Team Concert 1.0. © Copyright International Business Machines Corporation 2008. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Notices . xi Trademarks . xii Preface . xiii The team that wrote this book . xiv Become a published author . xvii Comments welcome. xvii Part A. Collaborative Application Lifecycle Management defined. 1 Chapter 1. Introduction to Application Lifecycle Management and this book . 3 1.1 The scope of Application Lifecycle Management . 4 1.1.1 People, process, information, and tools that drive the life cycle . 4 1.1.2 The scope of this book . 7 1.2 Using this book . 11 1.2.1 Goals and objectives. 11 1.2.2 How this book is organized . 11 1.2.3 Target audience and chapters of interest . 13 Chapter 2. Collaborative Application Lifecycle Management . 15 2.1 Understanding Collaborative Application Lifecycle Management . 16 2.1.1 Changes in the ALM market . 16 2.1.2 A CALM blueprint to streamline software delivery . 24 2.2 Life-cycle collaboration and management. 30 2.2.1 Success indicators . 30 2.2.2 Cycles of activity in the development organization . 35 2.2.3 Scaling agile methods. 38 2.2.4 Aligning work assignments . 44 2.2.5 Being requirements driven . 45 2.2.6 Striving for build clarity and quality . 46 Chapter 3. A scenario for CALM . 47 3.1 A story telling a tale of integrations . 48 3.1.1 Story objectives. 49 3.1.2 The context for the story . 49 3.2 The project . 49 3.3 The software delivery team . 50 3.3.1 A team of teams . 51 3.3.2 The solution team leads . 53 3.3.3 The agile development team. 54 3.3.4 The solution testing team . 55 3.4 The approach . 55 3.4.1 Phases and iterations for establishing cadence . 56 3.4.2 Frequent builds to drive clarity and quality . 57 3.4.3 Testing to drive quality . 57 3.4.4 Lean governance . 58 3.5 A story told act by act: Completing an iteration. 58 3.5.1 Act 1: Responding to a change request . 60 3.5.2 Act 2: Collaborative development . 61 © Copyright IBM Corp. 2008. All rights reserved. iii 3.5.3 Act 3: Enterprise integration builds . 63 3.5.4 Act 4: Managing quality. 64 3.5.5 Act 5: Delivering the solution . 65 3.6 Life-cycle collaboration . 66 3.6.1 Life-cycle assets in this CALM scenario . 66 3.6.2 Agility at Scale . 67 3.7 Reference architecture and configuration . 69 3.7.1 An enterprise CALM solution . 70 3.7.2 Product integrations for this scenario . 72 3.7.3 Supporting distributed teams . 73 Part B. Act 1: Responding to a change request. 77 Chapter 4. The team responds to a requirement change . 79 4.1 Introduction to change management. 80 4.1.1 The changing change management market . 80 4.1.2 The changing requirements definition and management market . 83 4.1.3 Collaborative development blueprint and change management. 88 4.1.4 Requirements definition and management blueprint. 93 4.2 A reference scenario for responding to a change request . 105 4.2.1 The actors . 106 4.2.2 The workflow. 106 4.2.3 Bob submits a request . 108 4.2.4 Patricia updates the project iteration plan. 108 4.2.5 Marco updates the development iteration plan . 109 4.2.6 Tammy updates the solution test plan . 109 4.2.7 Patricia confirms the project iteration plan . 110 4.2.8 Bob defines and manages the requirements . 111 4.3 Considerations in change management . 112 4.3.1 Analyzing and prioritizing requests . 112 4.3.2 Sizing requests . 113 4.3.3 Rational Team Concert for stakeholder requests . 114 Chapter 5. Rational ClearQuest, Requirements Composer, and RequisitePro to manage stakeholder requests . 115 5.1 Act 1: Responding to a change request . 116 5.2 Rational RequisitePro and Rational Requirements Composer . 117 5.3 Rational ClearQuest ..
Load more

Recommended publications
  • Modisco: a Model Driven Reverse Engineering Framework Hugo Bruneliere, Jordi Cabot, Grégoire Dupé, Frédéric Madiot
    MoDisco: a Model Driven Reverse Engineering Framework Hugo Bruneliere, Jordi Cabot, Grégoire Dupé, Frédéric Madiot To cite this version: Hugo Bruneliere, Jordi Cabot, Grégoire Dupé, Frédéric Madiot. MoDisco: a Model Driven Reverse Engineering Framework. Information and Software Technology, Elsevier, 2014, 56 (8), pp.1012-1032. 10.1016/j.infsof.2014.04.007. hal-00972632 HAL Id: hal-00972632 https://hal.inria.fr/hal-00972632 Submitted on 7 Apr 2014 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. MoDisco: a Model Driven Reverse Engineering Framework Hugo Bruneli`erea,1,∗, Jordi Cabota, Gr´egoire Dup´eb, Fr´ed´eric Madiotc aAtlanMod (Inria & LINA), Ecole des Mines de Nantes, 4 rue Alfred Kastler, 44307 Nantes, France bMia-Software, 4 rue du Chateau de l’Eraudi`ere, 44324 Nantes, France cObeo, 7 boulevard Amp`ere, Espace Performance La Fleuriaye, 44481 Carquefou, France Abstract Context: Most companies, independently of their size and activity type, are facing the problem of managing, maintaining and/or replacing (part of) their existing software systems. These legacy systems are often large applications playing a critical role in the company’s information system and with a non-negligible impact on its daily operations.
    [Show full text]
  • Rugby - a Process Model for Continuous Software Engineering
    INSTITUT FUR¨ INFORMATIK DER TECHNISCHEN UNIVERSITAT¨ MUNCHEN¨ Forschungs- und Lehreinheit I Angewandte Softwaretechnik Rugby - A Process Model for Continuous Software Engineering Stephan Tobias Krusche Vollstandiger¨ Abdruck der von der Fakultat¨ fur¨ Informatik der Technischen Universitat¨ Munchen¨ zur Erlangung des akademischen Grades eines Doktors der Naturwissenschaften (Dr. rer. nat.) genehmigten Dissertation. Vorsitzender: Univ.-Prof. Dr. Helmut Seidl Prufer¨ der Dissertation: 1. Univ.-Prof. Bernd Brugge,¨ Ph.D. 2. Prof. Dr. Jurgen¨ Borstler,¨ Blekinge Institute of Technology, Karlskrona, Schweden Die Dissertation wurde am 28.01.2016 bei der Technischen Universitat¨ Munchen¨ eingereicht und durch die Fakultat¨ fur¨ Informatik am 29.02.2016 angenommen. Abstract Software is developed in increasingly dynamic environments. Organizations need the capability to deal with uncertainty and to react to unexpected changes in require- ments and technologies. Agile methods already improve the flexibility towards changes and with the emergence of continuous delivery, regular feedback loops have become possible. The abilities to maintain high code quality through reviews, to regularly re- lease software, and to collect and prioritize user feedback, are necessary for con- tinuous software engineering. However, there exists no uniform process model that handles the increasing number of reviews, releases and feedback reports. In this dissertation, we describe Rugby, a process model for continuous software en- gineering that is based on a meta model, which treats development activities as parallel workflows and which allows tailoring, customization and extension. Rugby includes a change model and treats changes as events that activate workflows. It integrates re- view management, release management, and feedback management as workflows. As a consequence, Rugby handles the increasing number of reviews, releases and feedback and at the same time decreases their size and effort.
    [Show full text]
  • Ewsolutions Enterprise Architecture, Data Architecture, Data
    EWSolutions Enterprise Architecture, Data Architecture, Data Governance, Metadata Management Case Study Leveraging Existing Investments in Systems, Data and Personnel to Improve Logistics and Supply Chain Management for Defense Operations Enterprise architecture planning and development, data architecture, metadata management, data governance, and enterprise data integration combined to ensure the success of the world's largest defense logistics and supply chain. EWSolutions, Inc. 1/25/2017 Developing and Implementing a New Defense Logistics Supply Chain: A Case Study in How EWSolutions Enabled Success for the US Department of Defense The Department of Defense (DoD) is America's oldest and largest government agency. It employs a civilian force of 742,000, along with over 1.3 million men and women on active duty; it is the United State's largest employer. Another 826,000 people serve in the National Guard and Reserve forces. The national security depends on defense installations, people, and facilities being in the right place, at the right time, with the right qualities and capacities to protect the security of the United States and allies. These military service members and civilians operate in every time zone and in every climate. More than 450,000 employees are overseas, both afloat and ashore. This complexity extends to the logistics, communication, and supply chain needed to connect and furnish these employees and dependents with all the required resources (food, clothing, weapons, etc.) The mission of the US Department of Defense is to provide the military forces needed to deter war and to protect the security of the United States. Fulfilling this mission requires a large variety of resources; securing and delivering those resources to the right place at the right time in the right quantities requires accurate information that comes from complete and valid data.
    [Show full text]
  • Enterprise Architecture
    Enterprise Architecture Dr. Adnan Albar Faculty of Computing & Information Technology King AbdulAziz University - Jeddah 1 Enterprise Architecture Methods Lecture 5 Week 5 Slides King AbdulAziz University - FCIT 2 Overview . Description Languages for Business & IT Domains . IDEF . BPMN . Testbed . ARIS . Unified Modeling Language . Service-Oriented Architecture (SOA) Slide 3 Description Languages . In domains such as business process design and software development, we find established description languages for modeling these domains. For software modeling, UML is of course, the single dominant language. In organization and process modeling, on the other hand, a multitude of languages are in use: there is no standard for models in this domain. We will focus on languages that either find widespread use or have properties that are interesting from the perspective of our goals in developing an enterprise architecture language. Slide 4 IDEF – Integrated DEFinition Methods .IDEF is a family of languages .Used to perform enterprise modeling and analysis .Currently, there are 16 IDEF methods. Of these methods, IDEF0, IDEF3, and IDEF1X (‘the core’) are the most commonly used. Slide 5 IDEF – The Scope it Covers .Functional modeling, IDEF0: The idea behind IDEF0 is to model the elements controlling the execution of a function, the actors performing the function, the objects or data consumed and produced by the function, and the relationships between business functions (shared resources and dependencies). .Process modeling, IDEF3: IDEF3 captures the workflow of a business process via process flow diagrams. These show the task sequence for processes performed by the organization, the decision logic, describe different scenarios for performing the same business functions, and enable the analysis and improvement of the workflow.
    [Show full text]
  • Writing and Reviewing Use-Case Descriptions
    Bittner/Spence_06.fm Page 145 Tuesday, July 30, 2002 12:04 PM PART II WRITING AND REVIEWING USE-CASE DESCRIPTIONS Part I, Getting Started with Use-Case Modeling, introduced the basic con- cepts of use-case modeling, including defining the basic concepts and understanding how to use these concepts to define the vision, find actors and use cases, and to define the basic concepts the system will use. If we go no further, we have an overview of what the system will do, an under- standing of the stakeholders of the system, and an understanding of the ways the system provides value to those stakeholders. What we do not have, if we stop at this point, is an understanding of exactly what the system does. In short, we lack the details needed to actually develop and test the system. Some people, having only come this far, wonder what use-case model- ing is all about and question its value. If one only comes this far with use- case modeling, we are forced to agree; the real value of use-case modeling comes from the descriptions of the interactions of the actors and the system, and from the descriptions of what the system does in response to the actions of the actors. Surprisingly, and disappointingly, many teams stop after developing little more than simple outlines for their use cases and consider themselves done. These same teams encounter problems because their use cases are vague and lack detail, so they blame the use-case approach for having let them down. The failing in these cases is not with the approach, but with its application.
    [Show full text]
  • The Guide to Succeeding with Use Cases
    USE-CASE 2.0 The Guide to Succeeding with Use Cases Ivar Jacobson Ian Spence Kurt Bittner December 2011 USE-CASE 2.0 The Definitive Guide About this Guide 3 How to read this Guide 3 What is Use-Case 2.0? 4 First Principles 5 Principle 1: Keep it simple by telling stories 5 Principle 2: Understand the big picture 5 Principle 3: Focus on value 7 Principle 4: Build the system in slices 8 Principle 5: Deliver the system in increments 10 Principle 6: Adapt to meet the team’s needs 11 Use-Case 2.0 Content 13 Things to Work With 13 Work Products 18 Things to do 23 Using Use-Case 2.0 30 Use-Case 2.0: Applicable for all types of system 30 Use-Case 2.0: Handling all types of requirement 31 Use-Case 2.0: Applicable for all development approaches 31 Use-Case 2.0: Scaling to meet your needs – scaling in, scaling out and scaling up 39 Conclusion 40 Appendix 1: Work Products 41 Supporting Information 42 Test Case 44 Use-Case Model 46 Use-Case Narrative 47 Use-Case Realization 49 Glossary of Terms 51 Acknowledgements 52 General 52 People 52 Bibliography 53 About the Authors 54 USE-CASE 2.0 The Definitive Guide Page 2 © 2005-2011 IvAr JacobSon InternationAl SA. All rights reserved. About this Guide This guide describes how to apply use cases in an agile and scalable fashion. It builds on the current state of the art to present an evolution of the use-case technique that we call Use-Case 2.0.
    [Show full text]
  • Challenges and Opportunities for the Medical Device Industry Meeting the New IEC 62304 Standard 2 Challenges and Opportunities for the Medical Device Industry
    IBM Software Thought Leadership White Paper Life Sciences Challenges and opportunities for the medical device industry Meeting the new IEC 62304 standard 2 Challenges and opportunities for the medical device industry Contents With IEC 62304, the world has changed—country by country— for medical device manufacturers. This doesn’t mean, however, 2 Executive summary that complying with IEC 62304 must slow down your medical 2 Changes in the medical device field device software development. By applying best practices guid- ance and process automation, companies have a new opportunity 3 What is so hard about software? to improve on their fundamental business goals, while getting through regulatory approvals faster, lowering costs and deliver- 4 Disciplined agile delivery: Flexibility with more structure ing safer devices. 4 Meeting the specification: A look at some of the details This paper will explore what IEC 62304 compliance means for manufacturers in some detail, and also describe the larger con- text of systems and software engineering best practices at work 6 Process steps for IEC 62304 compliance in many of today’s most successful companies. 7 Performing the gap analysis Changes in the medical device field 8 Choosing software tools for IEC 62304 The IEC 62304 standard points to the more powerful role that software plays in the medical device industry. Once hardware 11 Conclusion was king. Older systems used software, of course, but it was not the main focus, and there wasn’t much of a user interface. Executive summary Software was primarily used for algorithmic work. Not to overly The recent IEC 62304 standard for medical device software is generalize, but the focus of management was on building causing companies worldwide to step back and examine their hardware that worked correctly; software was just a necessary software development processes with considerable scrutiny.
    [Show full text]
  • Integrating IT Portfolio Management with Enterprise Architecture Management 79
    Enterprise Modelling and Information Systems Architectures Vol. 8, No. 2, December 2013 Integrating IT Portfolio Management with Enterprise Architecture Management 79 Daniel Simon, Kai Fischbach, Detlef Schoder Integrating IT Portfolio Management with Enterprise Architecture Management The management of information technology (IT) as a business has become a crucial factor in today’s complex and dynamic environments. Many firms thus have implemented IT portfolio and enterprise architecture (EA) management practices, and academic research has paid increasing attention to these concepts. However, their integration seems poorly substantiated; this article therefore seeks to answer two main questions: (1) What are differences and common characteristics of IT portfolio and EA management, and in what way can they be integrated? and (2) what factors and types might describe an integrated process design of EA management and project portfolio management in particular? To answer these questions, this study synthesises previous research and surveys EA practitioners to propose an EA management process map, as well as three descriptive factors and four clusters, which provide an integrated process design with project portfolio management. The interrelations with organisational aspects and software tool support are also explored. This article thereby clarifies and systematises the subject area while also offering advice for researchers and practitioners. 1 Introduction structured, business-like approach to IT manage- ment that comprises application, infrastructure, The notion of managing information technology service, and project portfolio management (Ben- (IT) as a business (Lientz and Larssen 2004) has son et al. 2004; Kaplan 2005). attracted significant attention, particularly as IT environments grow steadily more complex and Integration is equally critical to EA management, thus more difficult to manage.
    [Show full text]
  • The Timeboxing Process Model for Iterative Software Development
    The Timeboxing Process Model for Iterative Software Development Pankaj Jalote Department of Computer Science and Engineering Indian Institute of Technology Kanpur – 208016; India Aveejeet Palit, Priya Kurien Infosys Technologies Limited Electronics City Bangalore – 561 229; India Contact: [email protected] ABSTRACT In today’s business where speed is of essence, an iterative development approach that allows the functionality to be delivered in parts has become a necessity and an effective way to manage risks. In an iterative process, the development of a software system is done in increments, each increment forming of an iteration and resulting in a working system. A common iterative approach is to decide what should be developed in an iteration and then plan the iteration accordingly. A somewhat different iterative is approach is to time box different iterations. In this approach, the length of an iteration is fixed and what should be developed in an iteration is adjusted to fit the time box. Generally, the time boxed iterations are executed in sequence, with some overlap where feasible. In this paper we propose the timeboxing process model that takes the concept of time boxed iterations further by adding pipelining concepts to it for permitting overlapped execution of different iterations. In the timeboxing process model, each time boxed iteration is divided into equal length stages, each stage having a defined function and resulting in a clear work product that is handed over to the next stage. With this division into stages, pipelining concepts are employed to have multiple time boxes executing concurrently, leading to a reduction in the delivery time for product releases.
    [Show full text]
  • Best Practice of SOA
    JOURNAL OF COMPUTING, VOLUME 2, ISSUE 2, FEBRUARY 2010, ISSN: 2151-9617 38 HTTPS://SITES.GOOGLE.COM/SITE/JOURNALOFCOMPUTING/ Improvement in RUP Project Management via Service Monitoring: Best Practice of SOA Sheikh Muhammad Saqib1, Shakeel Ahmad1, Shahid Hussain 2, Bashir Ahmad 1 and Arjamand Bano3 1Institute of Computing and Information Technology Gomal University, D.I.Khan, Pakistan 2 Namal University, Mianwali , Pakistan 3 Mathematics Department Gomal University, D.I.Khan, Pakistan Abstract-- Management of project planning, monitoring, scheduling, estimation and risk management are critical issues faced by a project manager during development life cycle of software. In RUP, project management is considered as core discipline whose activities are carried in all phases during development of software products. On other side service monitoring is considered as best practice of SOA which leads to availability, auditing, debugging and tracing process. In this paper, authors define a strategy to incorporate the service monitoring of SOA into RUP to improve the artifacts of project management activities. Moreover, the authors define the rules to implement the features of service monitoring, which help the project manager to carry on activities in well define manner. Proposed frame work is implemented on RB (Resuming Bank) application and obtained improved results on PM (Project Management) work. Index Terms—RUP, SOA, Service Monitoring, Availability, auditing, tracing, Project Management NTRODUCTION 1. I 2. RATIONAL UNIFIED PROCESS (RUP) Software projects which are developed through RUP RUP is a software engineering process model, which provides process model are solution oriented and object a disciplined approach to assigning tasks and responsibilities oriented. It provides a disciplined approach to within a development environment.
    [Show full text]
  • Descriptive Approach to Software Development Life Cycle Models
    7797 Shaveta Gupta et al./ Elixir Comp. Sci. & Engg. 45 (2012) 7797-7800 Available online at www.elixirpublishers.com (Elixir International Journal) Computer Science and Engineering Elixir Comp. Sci. & Engg. 45 (2012) 7797-7800 Descriptive approach to software development life cycle models Shaveta Gupta and Sanjana Taya Department of Computer Science and Applications, Seth Jai Parkash Mukand Lal Institute of Engineering & Technology, Radaur, Distt. Yamunanagar (135001), Haryana, India. ARTICLE INFO ABSTRACT Article history: The concept of system lifecycle models came into existence that emphasized on the need to Received: 24 January 2012; follow some structured approach towards building new or improved system. Many models Received in revised form: were suggested like waterfall, prototype, rapid application development, V-shaped, top & 17 March 2012; Bottom model etc. In this paper, we approach towards the traditional as well as recent Accepted: 6 April 2012; software development life cycle models. © 2012 Elixir All rights reserved. Keywords Software Development Life Cycle, Phases and Software Development, Life Cycle Models, Traditional Models, Recent Models. Introduction Software Development Life Cycle Models The Software Development Life Cycle (SDLC) is the entire Software Development Life Cycle Model is an abstract process of formal, logical steps taken to develop a software representation of a development process. SDLC models can be product. Within the broader context of Application Lifecycle categorized as: Management (ALM), the SDLC
    [Show full text]
  • Letter, If Not the Spirit, of One Or the Other Definition
    Producing Open Source Software How to Run a Successful Free Software Project Karl Fogel Producing Open Source Software: How to Run a Successful Free Software Project by Karl Fogel Copyright © 2005-2021 Karl Fogel, under the CreativeCommons Attribution-ShareAlike (4.0) license. Version: 2.3214 Home site: https://producingoss.com/ Dedication This book is dedicated to two dear friends without whom it would not have been possible: Karen Under- hill and Jim Blandy. i Table of Contents Preface ............................................................................................................................. vi Why Write This Book? ............................................................................................... vi Who Should Read This Book? ..................................................................................... vi Sources ................................................................................................................... vii Acknowledgements ................................................................................................... viii For the first edition (2005) ................................................................................ viii For the second edition (2021) .............................................................................. ix Disclaimer .............................................................................................................. xiii 1. Introduction ...................................................................................................................
    [Show full text]