CPT-386 Manual

1. Introduction 3. Hardware Description 3.4. Side Panel This is a scan converter box to convert a variety of computer image to The following sections describe the hardware components. Switch between 480i and 576i resolution output. Component signal. It support input resolution up to UXGA (1600x1200@60Hz) 3.1. Top Panel and output resolution supports 480i or 576i. This is ideal for use in applications like video conference, home theater, business presentation, lecturing room

or viewing PC image on TV. 480 i 576 i 2. Features CPT-386 PC to ● Scale down the input PC image and convert it to Component signal. ● Supports high resolution PC input up to UXGA (1600x1200@60Hz). ● Supports output resolution: 480i or 576i. PC to Component Component ● Easy to carry with palm size design. POWER 4. Connection and Installation

TABLE OF CONTENTS Scan Converter 1 1. Introduction...... 1 1 Power switch and LED Indicator: When power is turned on the LED will Y/Cb/Cr 2. Features...... 1 illuminate in green color. When press power switch once to turn the system Operation Manual in standby mode and the LED will illuminate in red color. 3. Hardware Description...... 2 Note: The factory setting is in power on mode. PC LCD TV 3.1 Top Panel...... 2 3.2. Front Panel 3.3. Rear Panel 3.2 Front Panel...... 2 5. Specifications Cr Cb Y Input Resolutions VGA up to 140Hz refresh rate 3.3 Rear Panel...... 2 DC PC SVGA up to 120Hz refresh rate INPUT 5V OUTPUT 3.4 Side Panel...... 3 XGA up to 85Hz refresh rate SXGA up to 60Hz refresh rate 4. Connection and Installation...... 3 UXGA at 60Hz refresh rate 1 2 3 Output Resolutions Y/Cb/Cr of 480i or 576i 5. Specifications...... 3 Input Port 1 x D-Sub 15-pin (Female R/G/B/H/V) 1 PC Input: Connect the PC input port to the output port of your computer Output Port Component (3 RCA Jack) (desktop, notebook/laptop, or device providing PC resolution output), Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified) using D-Sub 15-pin cable. Dimensions (mm) 100(W) x 64(D) x 18.5(H) 2 Power Supply: Plug the 5V DC 1A power supply into the unit and connect Weight(g) 100 the adaptor to AC wall outlet. Chassis Material Plastic 3 Component Output: Connect the component output port to the input port Silkscreen Color Gray of your display, using 3 RCA cable. Operating Temperature 0°C ~ 40°C

CPT-386

or viewing PC image on TV. 480 i 576 i 2. Features ● Scale down the input PC image and convert it to Component signal. ● Supports high resolution PC input up to UXGA (1600x1200@60Hz). ● Supports output resolution: 480i or 576i. PC to Component ● Easy to carry with palm size design.

POWER

1 Power switch and LED Indicator: When power is turned on the LED will illuminate in green color. When press power switch once to turn the system in standby mode and the LED will illuminate in red color. Note: The factory setting is in power on mode.

3.2. Front Panel 3.3. Rear Panel

Cr Cb Y PC DC INPUT 5V OUTPUT

1 2 3

1 PC Input: Connect the PC input port to the output port of your computer (desktop, notebook/laptop, or device providing PC resolution output), using D-Sub 15-pin cable. 2 Power Supply: Plug the 5V DC 1A power supply into the unit and connect the adaptor to AC wall outlet. 3 Component Output: Connect the component output port to the input port of your display, using 3 RCA cable.

1 2 2008.3.7 MPM-CPT386 1. Introduction 3. Hardware Description 3.4. Side Panel This is a scan converter box to convert a variety of computer image to The following sections describe the hardware components. Switch between 480i and 576i resolution output. Component signal. It support input resolution up to UXGA (1600x1200@60Hz) 3.1. Top Panel and output resolution supports 480i or 576i. This is ideal for use in applications like video conference, home theater, business presentation, lecturing room

POWER

TABLE OF CONTENTS 1 1. Introduction...... 1 1 Power switch and LED Indicator: When power is turned on the LED will 2. Features...... 1 illuminate in green color. When press power switch once to turn the system in standby mode and the LED will illuminate in red color. 3. Hardware Description...... 2 Note: The factory setting is in power on mode. 3.1 Top Panel...... 2 3.2. Front Panel 3.3. Rear Panel 3.2 Front Panel...... 2 Cr Cb Y 3.3 Rear Panel...... 2 PC DC INPUT 5V OUTPUT 3.4 Side Panel...... 3 4. Connection and Installation...... 3 1 2 3 5. Specifications...... 3 1 PC Input: Connect the PC input port to the output port of your computer (desktop, notebook/laptop, or device providing PC resolution output), using D-Sub 15-pin cable. 2 Power Supply: Plug the 5V DC 1A power supply into the unit and connect the adaptor to AC wall outlet. 3 Component Output: Connect the component output port to the input port of your display, using 3 RCA cable.

1 2 2008.3.7 MPM-CPT386 1. Introduction This is a scan converter box to convert a variety of computer image to Component signal. It support input resolution up to UXGA (1600x1200@60Hz) and output resolution supports 480i or 576i. This is ideal for use in applications like video conference, home theater, business presentation, lecturing room or viewing PC image on TV.

2. Features ● Scale down the input PC image and convert it to Component signal. ● Supports high resolution PC input up to UXGA (1600x1200@60Hz). ● Supports output resolution: 480i or 576i. ● Easy to carry with palm size design.

1 2008.3.7 MPM-CPT386 3. Hardware Description The following sections describe the hardware components. 3.1. Top Panel

PC to Component

POWER

3.2. Front Panel 3.3. Rear Panel

Cr Cb Y PC DC INPUT 5V OUTPUT

1 2 3

2 2008.3.7 MPM-CPT386 3.4. Side Panel Switch between 480i and 576i resolution output.

480 i 576 i

4. Connection and Installation

Y/Cb/Cr

PC LCD TV

5. Specifications Input Resolutions VGA up to 140Hz refresh rate SVGA up to 120Hz refresh rate XGA up to 85Hz refresh rate SXGA up to 60Hz refresh rate UXGA at 60Hz refresh rate Output Resolutions Y/Cb/Cr of 480i or 576i Input Port 1 x D-Sub 15-pin (Female R/G/B/H/V) Output Port Component (3 RCA Jack) Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified) Dimensions (mm) 100(W) x 64(D) x 18.5(H) Weight(g) 100 Chassis Material Plastic Silkscreen Color Gray Operating Temperature 0°C ~ 40°C

3 1. Introduction 3. Hardware Description 3.4. Side Panel This is a scan converter box to convert a variety of computer image to The following sections describe the hardware components. Switch between 480i and 576i resolution output. Component signal. It support input resolution up to UXGA (1600x1200@60Hz) 3.1. Top Panel and output resolution supports 480i or 576i. This is ideal for use in applications like video conference, home theater, business presentation, lecturing room or viewing PC image on TV. 480 i 576 i 2. Features ● Scale down the input PC image and convert it to Component signal. ● Supports high resolution PC input up to UXGA (1600x1200@60Hz). ● Supports output resolution: 480i or 576i. PC to Component ● Easy to carry with palm size design.

POWER 4. Connection and Installation

TABLE OF CONTENTS 1 1. Introduction...... 1 1 Power switch and LED Indicator: When power is turned on the LED will Y/Cb/Cr 2. Features...... 1 illuminate in green color. When press power switch once to turn the system in standby mode and the LED will illuminate in red color. 3. Hardware Description...... 2 Note: The factory setting is in power on mode. PC LCD TV 3.1 Top Panel...... 2 3.2. Front Panel 3.3. Rear Panel 3.2 Front Panel...... 2 5. Specifications Cr Cb Y Input Resolutions VGA up to 140Hz refresh rate 3.3 Rear Panel...... 2 DC PC SVGA up to 120Hz refresh rate INPUT 5V OUTPUT 3.4 Side Panel...... 3 XGA up to 85Hz refresh rate SXGA up to 60Hz refresh rate 4. Connection and Installation...... 3 UXGA at 60Hz refresh rate 1 2 3 Output Resolutions Y/Cb/Cr of 480i or 576i 5. Specifications...... 3 Input Port 1 x D-Sub 15-pin (Female R/G/B/H/V) 1 PC Input: Connect the PC input port to the output port of your computer Output Port Component (3 RCA Jack) (desktop, notebook/laptop, or device providing PC resolution output), Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified) using D-Sub 15-pin cable. Dimensions (mm) 100(W) x 64(D) x 18.5(H) 2 Power Supply: Plug the 5V DC 1A power supply into the unit and connect Weight(g) 100 the adaptor to AC wall outlet. Chassis Material Plastic 3 Component Output: Connect the component output port to the input port Silkscreen Color Gray of your display, using 3 RCA cable. Operating Temperature 0°C ~ 40°C

1 2 3 2008.3.7 MPM-CPT386 OUTPUT 1. Introduction 3. Hardware Description 3.4. Side Panel This is a scan converter box to convert a variety of computer image to The following sections describe the hardware components. Switch between 480i and 576i resolution output. Component signal. It support input resolution up to UXGA (1600x1200@60Hz) 3.1. Top Panel and output resolution supports 480i or 576i. This is ideal for use in applications like video conference, home theater, business presentation, lecturing room or viewing PC image on TV. 480 i 576 i 2. Features ● Scale down the input PC image and convert it to Component signal. ● Supports high resolution PC input up to UXGA (1600x1200@60Hz). ● Supports output resolution: 480i or 576i. PC to Component ● Easy to carry with palm size design.

POWER 4. Connection and Installation

CYPRESS TECHNOLOGY CO., LTD. 1 2 3 2008.3.7 MPM-CPT386 Home page: http://www.cypress.com.tw OUTPUT