1. Supplied Items 2. Locating Parts and Controls

‰‰AC adapter Charging the external device via ‰‰Power cord the USB port on the AC adapter Tablet Keyboard unit 1 Make sure that your external device supports ‰‰Digitizer stylus (pen) 1 2 3 4 1 Camera/Hello Camera USB charging. 2 Dual microphones 2 Connect the USB port on the AC adapter and the s s external device with a USB power cable, such as 3 IR LED d ‰‰LR8D425 (SIZE AAAA) alkaline battery the one supplied with your device. 4 LCD screen (touch screen) l (for the pen) LED 5 5 Power button/ Power indicator USB Port 6 Battery off button ; ‰‰SIM tray pin 6 7 Volume buttons i o u p a i The SIM tray pin has a sharp tip. Handle it z Bottom surface of with care to avoid unexpected injuries. When 8 Fingerprint sensor the keyboard unit Start-up Guide you store the pin, keep it safely out of reach of 7 9 microSIM card slot x small children to prevent accidental ingestion. 8 q Stereo speakers f User’s Manual ! Attention w Charge indicator c When current consumption of the connected e USB Type-C™ port (USB 3.1 Gen 1) ‰‰Cleaning cloth device exceeds the rated current of the AC adapter, This port supports the following standards. h power supply to the USB port stops. The power 9 • USB charging (BC 1.2 IN/OUT) ‰‰User’s manuals supply restarts when the current consumption of v b t • DisplayPort Alternate Mode g (See .) the connected device is reduced. Supplied User’s Manuals • USB Power Delivery (IN) Specifications: USB output, 5.0 VDC, 1.0 A The USB port on the AC adapter may not work with r Headset compatible headphone jack some of the USB charging enabled devices. q q t Rear camera (On models with the rear camera)

! Notice y Holder • Remove all components from the packaging and w remove the packaging material, including the e protective film. Check to ensure that the delivery j k is complete. If you find that there are missing or damaged components, contact customer service r immediately. u Docking connector s Flap ; Charge indicator • The supplied accessories were tested and found

functional solely with your VAIO computer. y i Guide pin d Security lock slot z LAN port

• Your VAIO computer can be recovered with the o Release switch f USB ports (USB 2.0) x Monitor port built-in hard disk or SSD and does not come with • Keep your hand away from the docking connector on the keyboard unit p Wireless keyboard status indicator g SD memory card slot c HDMI output port any recovery media. In case you could not recover to avoid unintentional direct contact. (On models with the wireless keyboard h Caps Lock indicator v USB port (USB 3.1 Gen 1) VJA121C12M the computer using the built-in hard disk or SSD, u • The HDMI output port and the monitor port on the keyboard unit are not function) This port can be used for USB charging. however, be sure to create your own recovery j Left/Right button ! Caution designed for concurrent use. a Wireless keyboard on/off button (BC 1.2 OUT) media with a USB flash drive before you first use k Touch pad your VAIO computer following your purchase. For • The battery packs of the tablet and the keyboard unit are not designed • While the IR LED is lit, heat may build up in the LED housing. Keep your (On models with the wireless keyboard b Battery off button l DC IN port detailed instructions on creating your own for removal. hand away from the LED. function) (On models with the keyboard unit recovery media or recovering the computer, refer • The tablet and the keyboard unit have built-in magnets around the • While your VAIO computer is turned on, pressing the battery off button containing the battery pack) © 2019 TREKSTOR GmbH to Data Backup/Computer Recovery in the docking connector. Keep magnet-sensitive objects (credit cards, etc.) may cause loss of unsaved data. Before pressing the battery off button, Recovery and Troubleshooting Guide. away from the connector to avoid possible data corruption. be sure to save all unsaved data and turn off the computer.

Supplied User’s Manuals 3. Setting Up Viewing authentication Congratulations on purchasing your VAIO computer! information Your VAIO computer comes with the following user’s manuals: ! Notice Connect to a Power Outlet Turn On Your VAIO Computer Set Up Windows (Initial Setup) Connect to the Internet Get Ready to Use Your VAIO Creating Your Own Recovery • Start-up Guide (this user’s manual) 1 • If your keyboard unit contains a battery pack, a 2 3 4 5 6 You can find the authentication Please read this user’s manual first. You can find basic information, including connecting charging priority will be given to the battery pack Computer Media information on the product name plate. accessories to your VAIO computer, setting up Windows, and connecting your VAIO computer to Connect the AC adapter and a power outlet with of the tablet when you connect the keyboard unit Press the Power button on the tablet. Follow the instructions displayed on the Before connecting to the Internet, you need to the Internet. the supplied power cord, and then plug the AC Windows Setup window to make initial settings. select a connection service, make a contract Close the LCD screen lid of your VAIO to a power outlet. Running Windows Update Your VAIO computer does not come with any • Safety Guide adapter to the DC IN port on the keyboard unit. with an Internet service provider accordingly, computer in Clamshell Mode, turn over the • When a USB AC adapter is plugged to the USB 1 Select (start), (Settings), and Update & recovery media. Be sure to create your own Please be sure to read this user’s manual. You can find information that helps you use your and make the Internet connection settings on computer, and then open the flap on the Type-C™ port on the tablet for battery charging, no security. recovery media with a USB flash drive before VAIO computer safely. ! Notice your VAIO computer. bottom surface of the keyboard unit. charging indication may appear on the LCD screen you first use the computer following your The VAIO computer you purchased may have the 2 Select Windows Update and follow the • Recovery and Troubleshooting Guide of the tablet depending on the USB AC adapter. In With your VAIO computer, you can connect to the latest updates applied. With these onscreen instructions to update the Windows. purchase. For more information, refer to the You can find troubleshooting FAQs as well as instructions on recovering your VAIO computer and such a case, check the charge indicator on the Internet either via a Wi-Fi (wireless LAN) or The product name plate updates applied, some alterations may be required Recovery and Troubleshooting Guide. creating recovery media. tablet for the charging status. The indicator is lit wired LAN network. to the operation procedures on the Windows Setup Features and apps described in these user’s manuals may not be available or preinstalled, while charging is in progress and goes out upon For detailed information on the Internet window described in this document. ! Attention depending on the model of your VAIO computer. Also, illustrations and screenshots used in them completion. Note that it may take some time Please refer to Windows Help or ’s connection settings and required network Before you recover your VAIO computer, be sure to may look different from what you actually see on your VAIO computer. before the charge indicator lights. website for more details. devices, refer to the manual from your service attach the tablet to the keyboard unit and connect it • To charge the battery pack of the tablet by provider and the manual that came with your to a power outlet with the AC adapter. VAIO Support Website connecting the USB port on the supplied AC device. adapter and the USB Type-C™ port on the tablet, Establishing a successful connection to the You can find the latest VAIO support information. When you need any help for using your VAIO follow the steps below to change the setting: Internet completes Windows license Hint computer, visit our VAIO support website first. 1 Select (start), and then select VAIO Control authentication. To turn off your VAIO computer or place it into https://eu.vaio.com/support/ Center from the menu. Sleep mode after the above preparations, select (start), (Power), and or . 2 Select Hardware, and then in USB Type-C Shut down Sleep

Power Delivery, select 1.0A (Output current less than 1.5A). When your VAIO computer is in Clamshell Mode Connecting the tablet directly to a with the keyboard unit attached, be sure to open power outlet the LCD screen lid before pressing the Power button. You can use an AC adapter compliant to the USB Power Delivery standard for connection to a power outlet or a mobile battery pack. ! Attention • When lifting the LCD screen lid, do not grasp the area around the camera as it will cause malfunctions. To USB Type-C™ • Do not turn off your VAIO computer before the port Windows Setup window appears.

IRX-8700 Start Guide 0-V00-000-00(0) 4. Using Your VAIO Computer in Three Modes 5. Using Windows Hello

Three usage modes of your VAIO computer Detaching/attaching the tablet On your VAIO computer, you can use the • Depending on the state of your fingerprint or fingerprint sensor and the Hello Camera to your use of the fingerprint sensor, enrollment Choose from three different usage modes View Open Mode Tablet Mode Detaching the tablet Attaching the tablet ! Caution access the Windows Hello functions. or authentication of the fingerprint may fail. • Before you carry around your VAIO computer in a to suit your needs. Turn around the tablet and attach it to the This mode is suitable for using your VAIO 1 Slide the release switch on the keyboard unit to 1 Align the holders on the tablet with the guide The Windows Hello functions include signing in When fingerprint authentication fails, try the bag, be sure to put it into Clamshell Mode and keyboard unit so that the LCD screen faces computer as a , where touch the left to unlock the tablet. pins on the keyboard unit, and then push in the with fingerprint authentication or face following: close the LCD screen lid. away from the keyboard unit. operations and pen operations with the digitizer tablet. recognition, instead of password, to the Clamshell Mode --Use another finger. This mode is suitable for simply viewing visual stylus are available for working with the Release switch The release switch on the keyboard unit • Do not grasp the flap on the keyboard unit to hold Windows user account for which you have By attaching the tablet to the keyboard unit, you in lock position your VAIO computer for carrying around as it may --Clean the finger. contents, such as videos, or showing the computer. automatically slides to the right to lock enrolled your fingerprint or face. can use your VAIO computer as a notebook cause damage to the flap or disengagement of --Delete the fingerprint already enrolled, and contents on the screen to someone sitting the tablet. For more information about the functions and computer. the tablet, resulting in injuries or malfunctions. then enroll it once again. across from you. Release switch setup of Windows Hello, refer to the Windows in unlock position • When you attach the tablet to the keyboard unit, Hello help. • During a dry season, such as winter, be sure to make sure that nothing, including your fingertip, is touch a metal object to discharge static caught between the keyboard unit and the tablet. Notes on fingerprint authentication and electricity from your body before scanning • While the release switch on the keyboard unit is your fingerprint. Static electricity may cause face recognition in unlock position, the orange marking malfunctions of the fingerprint sensor. underneath the switch is exposed. When you • The fingerprint authentication and face have attached the tablet to the keyboard unit, recognition technologies do not assure • If you have enabled fingerprint authentication make sure that the release switch is in lock complete verification of personal identity, nor for recovery from Sleep mode, your VAIO position to hide the orange marking. If the tablet do they guarantee absolute protection of your computer may recover from Sleep mode is attached but left unlocked, lifting your VAIO data and hardware. TREKSTOR GmbH unintentionally if something touches the computer may cause the tablet to fall off, assumes no liabilities arising out of your use fingerprint sensor, such as while you are resulting in injuries or malfunctions. ! Notice of or inability to use the fingerprint sensor carrying it in a bag. • The backlight of the keyboard unit lights only • While you are working on your data, sliding the and/or the Hello Camera. • For successful face recognition, you need to while your VAIO computer is in Clamshell Mode. release switch may cause loss of unsaved data. 2 Hold the keyboard unit still with one hand and remove a face mask or eye glasses, if any, • You can use the external devices connected to Before you attach/detach the tablet to/from the • The fingerprint and face recognition rates vary lift the tablet away from the keyboard unit with from the face and present your face as it was the ports on the keyboard unit only while your keyboard unit, be sure to save any unsaved data. depending on your use of the fingerprint the other hand. sensor and the Hello Camera. They are not enrolled. VAIO computer is in Clamshell Mode. • While video playback is in progress, changing the usage mode of your VAIO computer may cause consistent among individuals as well. • Face enrollment/recognition may fail under unstable operation of the computer. When you • Keep the fingerprint sensor and the Hello certain circumstances. In such a case, one of want to change the usage mode while you are Camera unscratched and clean to prevent the following may help. playing a video, stop the playback and close the malfunctions. --Delete your enrolled data for face video playback application beforehand. • Please be aware that your enrolled data for recognition and enroll your face once again. ! Notice • If the tablet is detached from the keyboard unit • While your VAIO computer is in View Open Mode, fingerprint authentication and face recognition --If you are in bright sunlight, shade the and your VAIO computer goes into Sleep mode, no power is supplied to the keyboard unit even if may be erased in the course of repair work to sunlight or move away from it and scan you cannot bring it back into Normal mode using it is connected to a power outlet with the AC your face for recognition. any USB device connected to the keyboard unit. your VAIO computer. adapter. In addition, while the tablet is detached from the • When you enroll fingerprints, be sure to enroll --Position the tablet upright and scan your full • While your VAIO computer is in View Open Mode, keyboard unit, you cannot turn on your VAIO more than one finger, in case of injuries. face for recognition. no keyboard operations are available unless the computer using the Wake on LAN function even if keyboard unit is provided with wireless keyboard the computer is connected to a network via the

function. LAN port.

6. Using Supplied Digitizer Stylus (Pen) 7. Inserting the SIM Card 8. Technical specifications

Locating Parts 2 Insert the battery into the pen with the + side How to Use the Digitizer Stylus Alternatively, you can perform right-clicking by If your VAIO computer has wireless WAN ! Attention Processor* (CPU): ® Core™ i7-8500Y (4 MB Cache, up to 4.2 GHz), capability, you can insert your SIM card • Do not touch the contacts on the SIM card Intel® Core™ i5-8200Y (4 MB Cache, up to 3.9 GHz) pointing toward the nib. (Pen) keep pressing the tip of the pen gently on the Note on the Declaration Service Information desired point for a few seconds and then taking (microSIM card) into the microSIM card slot on while inserting or removing the SIM card. In Operating system: Windows 10 Professional the meantime, be sure to hold your VAIO it away. the computer for wireless WAN Display: 12.5" anti-glare 10-point multi-touch of Conformity computer firmly. VAIO Support Website To move the pointer on the touch screen communications. Full HD IPS display (1920 x 1080) Put the tip of the pen close the touch screen and • Do not bend the SIM card or exert excessive Graphics unit (GPU): Intel® UHD Graphics 615 The manufacturer hereby confirms that You can find the latest VAIO support To drag (move an item) move the pen around. force on it to avoid damage to the card. RAM*: 16/8 GB LPDDR3 the personal computer VAIO A12 information. When you need any help for Press and hold the tip of the pen gently on the 1 Turn Off Your VAIO Computer • Wireless WAN communications will not be Internal storage* (SSD): 512/256 GB PCle NVMe complies with the requirements and using your VAIO computer, visit our VAIO 1 2 3 desired point on the touch screen and move the support website first. available unless the SIM card is properly Network: WiFi IEEE 802.11a/b/g/n/ac, other relevant provisions of Directive pen around. inserted. Gigabit-LAN, 2014/53/EU. https://eu.vaio.com/support/ 1 Tip-side button 2 Insert Your SIM Card into the Bluetooth® 4.1, Contact service team 2 Tail-side button microSIM Card Slot on the Side To erase text Mobile data (microSIM) The full EU Declaration of Conformity If you still require support beyond this, 3 Tail cap On some apps, you can erase text with the pen. of the Tablet 3 Make Settings for the SIM Card (3G Band: 1, 2, 4, 5, 6, 8, 19) and other device-specific information then please contact our service team Press and hold the tip-side button on the pen, Insert the supplied SIM tray pin straight into (4G Band: 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 18, 19, are available at the following Internet directly. 3 Attach the tail cap back in place. the eject hole on the SIM tray to slide out the For detailed setting instructions, refer to the 20, 21, 25, 26, 28, 29, 30, 38, 39, 40, 41, 66) address: https://eu.vaio.com Getting the pen ready for use put the tip of the pen gently on the first letter of the desired text, and then drag to the last letter. SIM tray. manual that came with your SIM card. Operations in the 5.15-5.35 GHz band are Telephone No.: +44 (0)33-33 36 91 74 ! Attention Face the IC chip surface of the microSIM restricted to indoor usage only. Monday - Friday: 09:00 - 18:00 Inserting a battery makes the pen operational. • Do not insert a commercially available card to the SIM tray, place the card on the Interfaces: USB Type-C 3.1 Gen 1, (local time) rechargeable battery as it may cause battery To click (tap) When the pen seems not working properly, tray, and then push in the tray straight and USB Type-A 3.1 Gen 1, fluid leaks and malfunctions of the pen. replace the battery. Tap the desired point on the touch screen once all the way into the microSIM card slot. 2x USB Type-A 2.0, • When the battery power is running low, replace with the pen. HDMI, VGA, LAN RJ45, 1 Remove the tail cap from the barrel of the pen. the battery with a new one promptly. Keeping a audio out/mic in 3.5mm, depleted battery in the pen may cause battery SD memory card reader To double-click (double-tap) fluid leaks. (SDHC up to 32 GB, SDXC up to 512 GB) Tap the desired point on the touch screen twice Camera (front): 2.07 MP in quick succession with the pen. More: Fingerprint sensor, GPS Replacing the nib (tip) Size: approx. 306 x 212 x 21 mm 1 Grasp the nib with tweezers and pull it straight To right-click (press and hold) Weight: approx. 1100 g out of the barrel of the pen. Press and hold the tail-side button on the pen, Material/Color: Magnesium alloy, aluminum, plastic/Black and then tap the desired point on the touch Battery: Lithium polymer (charging via DC IN) screen once with the pen. A different context * depending on model ! Notice menu appears depending on the tapped point. Be sure to use the supplied digitizer stylus (pen). Operation and storage 2 Check the direction of the new nib and insert it Temperatures: between 5 °C to 30 °C into the barrel of the pen. Relative humidity: of 30 % to 70 %

! Notice No spare nibs are supplied with the pen. For more Power adapter QG-VAIO-A12-V1-30-EN-190221 information about replacement nibs, contact our Input voltage: 100 - 240 V ~ , 50/60 Hz Copyright © 2019 Support Call. Be sure to Input current: 1,2 A max. Copyright laws prohibit copying any data of this product or the contents of this manual (illustrations, related documents etc.) in whole or in parts without the place the Output 1: DC 10.5 V/3800 mA permission of the copyright holder. and “VAIO” are the trademark of Corporation. TREKSTOR is a registered trademark of TREKSTOR Ltd. in the European microSIM card Output 2: DC 5 V/1000 mA Community and other countries. Intel, the Intel logo, the Intel Inside logo and Intel in the correct TREKSTOR GmbH Core are trademarks of Intel Corporation in the U.S. and/or other countries. Berliner Ring 7 Windows and Windows 10 Home are either registered trademarks or trademarks orientation on 64625 Bensheim, of Microsoft Corporation in the and/or other countries. All other Germany trademarks are the property of their respective owners. the SIM tray. The battery in this product cannot be easily replaced by users themselves.

IRX-8700 Start Guide 0-V00-000-00(0)