Residence Time Distribution Software Analysis
XA0101453 IAEA-CMS-11 No.11 Residence Time Distribution Software Analysis User's Manual International Atomic Energy Agency, 1996 PLEASE BE AWARE THAT ALL OF THE MISSING PAGES IN THIS DOCUMENT WERE ORIGINALLY BLANK COMPUTER MANUAL SERIES No. 11 Residence Time Distribution Software Analysis User's Manual INTERNATIONAL ATOMIC ENERGY AGENCY, VIENNA, 1996 The originating Section of this publication in the IAEA was: Industrial Applications and Chemistry Section International Atomic Energy Agency Wagramerstrasse 5 P.O. Box 100 A-1400 Vienna, Austria RESIDENCE TIME DISTRIBUTION SOFTWARE ANALYSIS USER'S MANUAL IAEA, VIENNA, 1996 IAEA-CMS-11 ©IAEA, 1996 Printed by the IAEA in Austria December 1996 FOREWORD Since its introduction into chemical engineering by Danckwerts in 1953, the concept of residence time distribution (RTD) has become an important tool for the analysis of industrial units (chemical reactors, mixers, mills, fluidized beds, rotary kilns, shaft furnaces, flotation cells, dust cleaning systems, etc.). In spite of its "old age", the general and practical aspects of RTDs are still discussed in leading chemical engineering journals. Radiotracers are widely used in analysing the operation of industrial units to eliminate problems and improve the economic performance. Radiotracer applications cover a wide range of industrial activities in chemical and metallurgical processes, water treatment, mineral processing, environmental protection and civil engineering. Experiment design, data acquisition, treatment and interpretation are the basic elements of tracer methodology. The application of radiotracers to determine impulse response as RTD as well as the technical conditions for conducting experiments in industry and in the environment create a need for data processing using special software.
[Show full text]