WAXING GUIDE 2019–2020 TABLE OF CONTENTS performance has already been improved for standing of that thin layer between the ski and the hundreds of years, at the beginning with natural ma- , where the ski’s performance is optimized in all terials for example by using tar. In the 1910s, the possible weather conditions. Vauhti brand was established and its Salaisuus WORLD’S LEADING WAX TECHNOLOGY FOR OVER ONE HUNDRED YEARS ...... 3 We want waxing to be easy and that does not nec- was revolutionary at the time, and a technological in- essarily need separate waxing facilities. Vauhti’s Liq- WAX SAFELY ...... 3 novation that significantly improved ski’s glide. The uid products are developed with the same accuracy development work that begun from Salaisuus wax FC POWDERS ...... 4 as the wax combinations used by the world’s top ski- laid the foundation for the world’s oldest ski wax ers. Waxing is no longer a barrier to , and you FC BLOCKS ...... 6 company that continues to operate, and which has can enjoy cross-country skiing, downhill skiing, in always been a pioneer in its industry. FC LIQUIDS ...... 8 forests, on mountains and fells. Our products and the technology behind them is Finnish culture, will to win, passion, perseverance, in- FOX LIQUIDS ...... 8 based on rigorous and long term testing in both lab- tegrity, and the newest technology in the industry - oratory as well as field conditions. We utilize Finn- HARDENING POWDERS ...... 10 these are the values and starting points from which ish university excellence and laboratories in our re- the Vauhti products that are used by the world’s top ULTRA GLIDE (UF) ...... 10 search work. Our product development team have a skiers, are created. HIGH FLUOROCARBON GLIDE WAXES (HF)...... 11 passion to achieve complete knowledge and under- LF RACE FLUORINATED GLIDE WAXES (LFR) ...... 12 LF FLUORINATED GLIDE WAXES (LF) ...... 13 GLIDE WAXES (GW) ...... 14 INSTRUCTIONS FOR PARAFFIN WAXES ...... 15 YEARS ONE HUNDRED FOR OVER LIQUID PRODUCTS ...... 16 LIQUID BASE WAXES FOR GLIDE ZONE ...... 20 WORLD’S LEADING WAX TECHNOLOGY TECHNOLOGY WORLD’S LEADING WAX LIQUID GRIP WAXES ...... 22 CROWN & ZERO MAINTENANCE AGENTS ...... 23 SKIN-SKI PRODUCTS ...... 24 GS SYNTHETIC GRIP WAXES ...... 25 GT TAR GRIP WAXES ...... 25 GF FLUORINATED GRIP WAXES ...... 26 GRIP WAX RECOMMENDATIONS FOR RACING & ACTIVE SKIERS ...... 27 GRIP WAX RECOMMENDATION FOR ACTIVE AND RECREATIONAL SKIERS ...... 28 • Avoid breathing dust / fume / gas / mist / vapors / Vauhti Products and Air Travel FLUORINATED KLISTERS (KF) ...... 29 spray from the waxes. Bringing the following products on board an air- plane is not allowed due to their flammable SYNTHETIC KLISTERS (KS) ...... 30 o Use waxes only in a well-ventilated area. content. o Wear appropriate respiratory protection GRIP POWDER ...... 30 • Wax removers equipped with correct filters: CLEANING AGENTS ...... 31 • Cleaning and base preparation fluids - P3 type mask should be used when waxed TOOLS ...... 32 with solid paraffins or top coatings. • Liquid products ALPINE TOOLS ...... 35 WAX SAFELY WAX - A2 type mask should be used when waxed with liquid waxes and cleaners The safety regulations and limitations of the airline • Must not be exposed to open flame or tempera- must be complied with when transporting the fol- ture above 200 °C / 400 °F. lowing liquid products. The products do not contain flammable compounds, but the restrictions applied • Protect hands with category V (standard EN420 by airlines concern all liquids. and EN374) work gloves, such as nitrile rubber. • FC-liquids o Wash your hands after waxing. If there are klis- ter stains on your hands, for example, use ordi- • Fox-liquids nary hand cream or grease, which will conven- iently remove the klister. • Dispose of contents and container in accord- ance with local and national regulations.

3 Package size: 30G FC POWDERS FC POWDERS PULVERIVOITELU

Vauhti product development team makes continuous innovations and has improved the FC products to a Base preparation for Vauhti FC powders: high level. These products have superb characteristics. They minimize the surface energy of the ski base, making it super-hydrophobic and dirt-repelling. At the same time, they are excellent in cold conditions to • Clean the ski base thoroughly with Vauhti Clean & Glide cleaning and maintenance agent. reduce dry . • Use an UF, HF, LFrace or Liquid product suitable for the snow type and humidity as the base wax. The speed, glide sensitivity, and durability of the FC-powders are excellent in all weather conditions. With versatile application methods every skier will benefit, even the lightweight skiers. • Scrape and brush the base wax layer carefully, start with roster or brass brush and polish with nylon brush.

Preparation for Powders: FCPWFC WET +10/-3°C | 50/25°F FCPLDRFC LDR +5/-20°C | 41/-4°F All snow types in wet, dirty and moist snow condi- Vauhti’s LDR powder, is designed specifically for • Iron the powder approx. 170–180 °C temperature.. Move the iron against the base of the ski with speed tions. long distance races (LDR) and events. During long that melts the powder perfectly. events temperatures can vary dramatically. For ex- • Cool the thoroughly and carefully scrape away excess powder FCPMFC MID 0/-6°C | 32/21°F ample, the morning subfreezing conditions can • Brush by horsehair brush. Continue with nylon brush until the surface is even and glossy. You can also use Works best on new and damp snow. change to above freezing. LDR powder’s ability to react to wide temperature fluctuations is phenom- analogous roto brushes. NOTE: Open the base structure of the ski with metal brush if needed. FCPC enal, along with its resistance to abrasion, makes it FC COLD -6/-20°C | 21/-4°F a trendsetter. All snow types, excellent in cold conditions to re- duce dry friction. This coating’s ability to react to wide variations in conditions puts it in a class of its own. LDR glides exceptionally well at slower speeds, but reaches its best performance as the pace and distance increase.

• All snow types, especially in old and man-made snow from cold to humid conditions. Many World Championship and World Cup starts in these con- ditions tell something about the performance of this product! • Excellent powder for all kinds of general use, whatever the conditions or distances. • Suitable for recreational skiers and juniors as all- purpose powder to be used through winter.

Note:

• Three powders will cover all weather conditions. • Vauhti LDR is an excellent all-purpose powder and high-end product on old and man-made snow. • FC powders have superior glide as compared to mere fluorinated waxes. The wetter or dirtier is the snow, the bigger is the difference • Remember to use respiratory mask with filter P3.

4 4 5 Package size: 20G FC BLOCKS FC BLOCKS

Instructions: FC blocks are based on the corresponding fluorocarbon powders. FC blocks can be used on top of quick glides, base waxes, fluorinated waxes or fluorocarbon powders. Apply into the base with either • Clean the ski base thoroughly with Vauhti Clean & Glide cleaning and maintenance agent. an iron or cork. • Use solid wax or liquid glide suitable for the snow type and humidity as the base wax. 320-FCBW 320-FCBC FC WET +10/-3°C | 50/25°F FC COLD -6/-20°C | 21/-4°F • Scrape and brush the base wax layer carefully, start with roster or brass brush and polish with nylon brush. All snow types in wet, dirty and moist snow condi- All snow types, excellent in cold conditions to re- • Apply some product onto the glide surfaces; adhere by roto cork or by natural cork. tions duce dry friction. • Let the skis cool down and scrape lightly 320-FCBMFC MID 0/-6°C | 32/21°F 320-FCBLDRFC LDR +5/-20°C | 50/25°F • Start brushing with a few roster brush strokes and brush thoroughly with a nylon brush. Works best on new and damp snow. All snow types, especially in old and man-made o When using roto brushes brush thoroughly with roto nylon if required use horsehair roto brush first. snow from cold to humid conditions.Excellent block for all kinds of general use, whatever the conditions • If the snow is wet, after nylon brushing, finalise slightly by fine roster brush or horsehair brush (matt sur- or distances. Suitable for recreational skiers and jun- face improves hydrophobicity). iors as all-purpose block to be used through winter. • In case of longer distances, iron the bottom layer slightly, cool down the skis, scrape carefully, brush the A good choice to mix with quick glides as a block glide surfaces, add another layer, adhere it by cold rubbing, and brush as above. porridge.

Note: • blocks fine-tunes the skis; as compared to mere waxing, the difference is considerable • suitable for coating liquid quick glides, base waxes, fluorine waxes and powders • a reasonable alternative for junior competitive skiers • affordable – one tube can be used to prepare up to 50 pairs of skis • cold rubbing is the quickest way to excellent glide after a busy working day

6 7 Package size: 40G

Note: • liquids fine-tunes the skis; as compared to mere waxing, the difference is considerable • suitable for coating liquid products, base waxes, fluorine waxes, blocks, and powders • a reasonable alternative for junior competitive skiers • affordable and quick way to achieve excellent glide FC LIQUIDS FC LIQUIDS • suitable for coating grip waxes to prevent icing, wetting, dirtying and to improve glide

Instructions: Liquefied versions of the FC powders. Excellent durability, also when applied directly on top of wax. FC liq- uids can be used on top of liquid productss, base waxes, fluorinated waxes or fluorocarbon powders. Waxing • Clean the ski base thoroughly with Vauhti Clean & Glide cleaning and maintenance agent. is quick and easy, result is very good even on top of base waxes. Suitable for coating grip waxes and klisters. • Use solid wax or liquid glide suitable for the snow type and humidity as the base wax. 50/25°F • Scrape and brush the base wax layer carefully, start with roster or brass brush and polish with nylon brush. 313-FCLW 313-FCL | 41/-20°F FC WET SPRINT +10/-3°C FC LDR +5/-20°C • Spread the gel evenly over the glide surfaces by finger, the ski must be at room temperature. Gel coating for all snow types, suitable for wet and • All snow types, especially in old and man-made • Let dry until the surface turns white. 0 °C conditions. Soft and greasy content guaranties snow from cold to humid conditions. water repellence and high speed. Durability of FC • Brush vigorously with a nylon brush. In wet conditions finalise with a brass, steel, or powder brush. • Excellent 100 % fluorocarbon liquid for all kinds of WET SPRINT is approx. 8 km on clean snow. general use, whatever the conditions or distances. • Longer distances: Rub the dried gel with natural cork (with drill or manually), leave to cool for a moment, brush vigorously with nylon brush. If necessary, use a roster brush first. NOTE! With FC WET SPRINT skip • Suitable for recreational skiers and juniors as all- 313-FCLM | 32/21°F the rubbing; otherwise, the base will be compacted, leading to deterioration of hydrophobic properties FC MID 0/-6°C purpose liquid to be used through winter. under wet conditions. “NEW IMPROVED CONTENT” Gel coating for mild winter temperatures, works best on new and damp 313-FCLB | 28/-4°F snow. FC-BLACK -2/-20°C Liquid fluorine coating with high content. 313-FCLCFC COLD -6/-20°C | 21/-4°F Best at very cold temperatures, also works well in wet conditions and at milder winter temperatures, All snow types, excellent in cold conditions to when the snow is dirty. Creates a very hard, extreme- reduce dry friction. ly durable and dirt-repellent coating. Used mainly to finalise powder or block treatment; can be applied by roto cork onto hard waxes.

Fox liquids are easy-to-apply, pliable liquid fluorocarbon coating products. They are suitable for use as top coats on liquid products, base waxes, fluorinated waxes or fluorocarbon powders as well as grip wax- es and klisters. Package size: 35G

313-FGW FOXGEL WET +10/-2°C | 50/28°F Gel coating for all snow types, suitable for wet and 0 °C conditions.t

FOX LIQUIDS FOX 313-FGM FOXGEL MID 0/-7°C | 32/19°F Gel coating for mild winter temperatures.

313-FGC FOXGEL COLD -5/-15°C | 23/5°F Excellent in cold conditions to reduce dry friction, works best on coarse old and manmade snow.

Instructions: • See FC liquids 8 9 Package size: 35G Package size: 45G / 90G / 180G Fluorocarbon hardening powders are designed for conditions in which the snow is exceptionally abra- sive. For old snow, artificial snow or especially if the snow re-freezes after a long period of thaw.

321-HPCHP COLD -6/-12°C | 32/10°F For cold winter temperatures.

321-HPPHP POLAR -10/-25°C | 14/-13°F For cold winter temperatures.

Note: • Can be applied on its own as paraffin waxes or mix with fluorocarbon coatings on cold, abrasive and dry snow. • On ice snow hardening powders give way better abrasion resistance when compared to waxes or HARDERING POWDERS fluorocarbon powders. Package size: 45G

The series is intended specifically for competitive skiers and demanding recreational skiers. High fluorocar- bon content provides for supreme water and dirt repellence. The entire line is suitable for all snow types, if the air humidity is over 55% and snow is humid or wet. The content of these products is the same as their predecessor Vauhti HF-gliders.

HF WET +10/-1°C | 50/30°F HF MOLY MID +3/-5°C | 37/23°F Excellent choice for new and wet snow or fine Designed in particular for damp artificial and old grained snow. snow conditions. Molybdenum disulphide forms a

HIGH FLUOROCARBON GLIDE WAXES (HF) WAXES GLIDE HIGH FLUOROCARBON hard, dense and wear-resistant surface character- ised by efficient dirt repellence. All new products, where the composition and the content of fluorinated additives is optimized. The com- HF MID 0/-5°C | 32/23°F position of wax raw materials have been selected by precise laboratory analysis and numerous field test. A special product for different snow types can be found from this series. A special product for new and damp snow. HF MOLY COLD -5/-20°C | 23/-4°F A special glide wax for artificial and old snow in cold UF WET +10/-6°C | 50/21°F UF COLD -3/-15°C | 27/5°F | 30/14°F HF COLD -1/-10°C conditions. Molybdenum disulphide forms a hard, UF WET is a special product for wet snow, works in UF COLD is a special product for cold snow, works NEW IMPROVED CONTENT For new or fine grained dense, and wear-resistant surface characterised by all snow types. Due to high fluorocarbon content in all snow types. Optimized fluorocarbon content cold snow. efficient dirt repellence. this wax is very hydrophobic. Hard wax composi- and wax composition make it sensitive and fast but tion makes it durable and dirt resistant. Wide op- at the same time also durable on dry cold snow. erating temperature range as long as the snow has Wide operating temperature range, also on sunny HF POLAR -6/-15°C | 21/5°F Note: high humidity. spring weather and on chemically treated dry snow Extremely hard fluorocarbon glider for very cold • Significantly improved glide properties as even on high air temperatures. winter conditions. compared to LF glides due to high fluorocar- bon content, which are emphasized under wet, UF MID +2/-4°C | 36/25°F UF LDR +5/-10°C | 41/14°F damp and dirty conditions. UF MID is a special product for new and damp snow. UF LDR paraffin glide wax, is designed specifical- Ultra high fluorocarbon content and soft wax com- ly for long distance races (LDR) and events. During position produce excellent gliding properties on long events temperatures and snow conditions can challenging new snow conditions. vary dramatically. Precisely selected wax raw ma- terials and high fluorocarbon content guarantees good hydrophobicity, dirt resistivity and durability.. °C UF GLIDE WAXES 45G UF LDR has a special ability to bind top coatings into

ULTRA FLUOROCARBON GLIDE WAXES (UF) WAXES GLIDE FLUOROCARBON ULTRA the ski base, which further improves the durability °C HF GLIDE WAXES 45G 90G 180G +10/-6 UF WET 330-UFW45 of the top coatings. All snow types, especially in old +10/-1 HF WET 332-HFW45 333-HFW90 334-HFW180 +2/-4 UF MID 330-UFM45 and man-made snow. Excellent high-performance glide wax for all kinds of general use, whatever the 0/-5 HF MID 332-HFM45 333-HFM90 334-HFM180 -3/-15 UF COLD 330-UFC45 conditions or distances. Improves performance and -1/-12 HF COLD 332-HFC45 333-HFC90 334-HFC180 durability of top coatings. +3/-10 UF LDR 330-UFLDR45 -6/-15 HF POLAR 332-HFP45 333-HFP90 334-HFP180

Note: +3/-5 HF MOLY MID 332-HFMM45 333-HFMM90 334-HFMM180 • Exceptional wax composition and optimized fluo- -5/-20 HF MOLY COLD 332-HFMC45 333-HFMC90 334-HFMC180 rocarbon content give way better gliding proper- +10/-12 HF MIX WET&COLD 332-HFWC45 ties when compared to equivalent HF-waxes. 10 11 Package size: 45G / 90G / 180G / 540G Package size: 60G

The series is intended specifically for active skiers and competitive skiers for training rounds. Fluorinated products are suitable for all snow types and weather conditions. The content of these products is the same The series is intended specifically for recreational skiers. Fluorinated LF glide series have improved glide as their predecessor Vauhti LF RACE-gliders except LF RACE MID. performance compared to basic waxes. The content of these products is the same as Vauhti LF RACE-glid- ers except with lower fluorocarbon content. LF RACE WET +10/-1°C | 50/30°F LF RACE ALL TEMP Comparable by hardness and wax composition to The hard and highly greasy wax absorbs very well HF WET. Operating range of LF RACE WET goes into the ski base. LF RACE ALL TEMP is an excellent LF WET +10/-1°C | 50/30°F LF GRAPHITE -1/-25°C | 30/-13°F down to -3°C on fresh snow and down to -5°C on old multipurpose glide wax for all snow types at mild Wet conditions and mild winter conditions. A glide wax for dry conditions at extremely cold tem- snow. A good choice on sunny spring weather when winter temperatures. Competitive skiers use this for peratures. In this glider, the green wax has been ad- ditionally hardened with graphite, which improves the snow humidity variates for wet to dry. training rounds and ski tests. For base preparation | 32/23°F LF MID 0/-5°C the performance of the wax at low temperatures and of new, stone-ground, or ‘overhauled’ skis. Forms a (LF) WAXES GLIDE LF FLUORINATED A special product for new and damp snow. low air humidity. The wax forms a very dense, shiny 32/23°F ‘greasy’ and shiny surface in 1-2 treatments. LF RACE MID 0/-5°C | surface and we always recommend to finish brush- A special product for new and damp snow, wax LF COLD -1/-10°C | 30/14°F ing with a brass brush. composition is comparable to HF MID. ALPINE BASE MIX A universal glide wax for all snow types at cold win- FLUORINATED ter temperatures. LF ALL TEMP LF RACE FLUORINATED GLIDE WAXES (LFR) WAXES GLIDE FLUORINATED LF RACE | 30/14°F Highly greasy fluorinated wax ab- LF RACE COLD -1/-10°C The hard and highly greasy wax absorbs very well sorbs very well into the ski base. A glide wax for cold winter temperatures; the ex- into the ski base. LF ALL TEMP is an excellent multi- For base preparation of new, LF POLAR -1/-25°C | 30/-13°F cellent adherence to ski base and wide operating purpose glide wax for all snow types at mild winter stone-ground, or ‘overhauled’ al- A wide operating range, good wear resistance – an range have made it an extremely popular choice as temperatures. For base preparation of new, stone- pine skis. Forms a good primer excellent choice for coarse substrate and creaky a base wax for fluorocarbon powders. ground, or ‘overhauled’ skis. Forms a ‘greasy’ and surface for harder waxes in 1-2 snow in cold winter days. shiny surface in 1-2 treatments. treatments and by that prevents | 30/-13F LF RACE POLAR -1/-25°C overheating of the ski base during LF RACE POLAR is for extreme cold conditions. An high speed rides. excellent base wax for fluorocarbon powders and coatings at extremely cold temperatures with hu- midity over 75%. Use on its own at dry snow, when the snow is ‘squeaky’. Also suitable for wet and dirty conditions, when a particularly hard base wax is re- quired under the powders.

LF RACE GRAPHITE -1/-25°C | 30/-13°F A glide wax for dry conditions at extremely cold tem- Note: peratures. In this glider, the green wax has been ad- • LFrace offer better glide than basic glide waxes ditionally hardened with graphite, which improves and they retain the glide better due to improved the performance of the wax at low temperatures and dirt repellence, which is emphasized under humid low air humidity. The wax forms a very dense, shiny conditions (partly cloudy sky already means hu- °C LF GLIDE WAXES 60G surface and we always recommend to finish brush- mid conditions). Note: ing with a brass brush. +10/-1 LF WET 336-LFW60 • LF glide waxes offer better glide than basic 0/-5 LF MID 336-LFM60 glide waxes, which is emphasized under humid °C LF RACE GLIDE WAXES 45G 90G 180G 540G conditions. -1/-10 LF COLD 336-LFC60 +10/-1 LF RACE WET 343-LFRW45 344-LFRW90 354-LFRW180 346-LFRW540 -1/-25 LF POLAR 336-LFP60 • One affordable package size for recreational 0/-5 LF RACE MID 343-LFRM45 344-LFRM90 354-LFRM180 346-LFRM540 skiers. -1/-25 LF RACE GRAPHITE 336-LFG60 -1/-10 LF RACE COLD 343-LFRC45 344-LFRC90 354-LFRC180 346-LFRC540 LF RACE ALL TEMP 336-LFA60 -1/-25 LF RACE POLAR 343-LFRP45 344-LFRP90 354-LFRP180 346-LFRP540 -1/-25 LF RACE GRAPHITE 343-LFRG45 344-LFRG90 354-LFRG180 346-LFRG540 LF RACE ALL TEMP 343-LFRA45 344-LFRA90 354-LFRA180 346-LFRA540 12 13 Package size: 90G / 180G / 540G INSTRUCTIONS FOR PARAFFIN BASE WAXING EXAMPLES WAXES Base waxing example for race skis: • Clean the ski base thoroughly with Vauhti Clean & 1. Clean the ski base thoroughly with Vauhti Clean & Glide cleaning and maintenance agent. Glide cleaning and maintenance agent. • Melt the wax with iron using temperature appro- 2. Melt LFrace All Temp wax with iron carefully over priate for each wax. Use plenty of wax and slow the whole glide zone, let cool down for couple of iron movement to ensure even and sufficient ab- minutes and re-melt with mild temperature. sorption of wax into the ski base. 3. Cool down, scape and brush thoroughly with ny- • Scrape hard waxes (POLAR, MOLY COLD, GRAPH- lon brush. Use metal brush if needed to open the ITE, and Hardening Powders) lightly when they are ski base structure. still warm, cool down and finalize scraping. Scrape other products when they are cooled. 4. Melt LFrace POLAR wax with iron carefully over the whole glide zone, let cool down for couple of GLIDE WAXES (GW) GLIDE WAXES • Brush first with roster or brass brush and finalize minutes and re-melt. carefully with nylon brush. 5. Scape lightly when the wax is still warm. • Ski base structure should be clearly visible after brushing, pay attention to careful brushing. 6. Cool down, scape and brush thoroughly first with metal brush and finalize with nylon brush.

Base waxing example for recreational skier’s skis: Glide waxes are made of high-quality hydrocarbons and they do not contain . Waxes are ex- 1. Clean the ski base thoroughly with Vauhti Clean & cellent for basic glide waxing, base preparation and maintenance as well as a base wax for racing. Glide cleaning and maintenance agent. 2. Apply a thick layer Vauhti liquid base primer on GW WET +10/-1°C | 50/30°F GW GRAPHITE -1/-25°C | 30/-13°F the gliding surfaces. Allow to absorb and dry per- Wet conditions and mild winter conditions. A glide wax for dry conditions at extremely cold tem- fectly, overnight if possible.

peratures. In this glider, the green wax has been ad- WAXES FOR PARAFFIN INSTRUCTIONS ditionally hardened with graphite, which improves 3. Brush the ski base strongly until they shine. The | 32/23°F GW MID 0/-5°C the performance of the wax at low temperatures and more accurately you brush, the better end result A special product for new and damp snow. low air humidity. The wax forms a very dense, shiny you achieve. surface and we always recommend to finish brush- 4. Apply suitable glide wax for the current weather GW COLD -1/-10°C | 30/14°F ing with a brass brush. on top of the primer. The skis are ready for skiing. A universal glide wax for all snow types at cold win- ter temperatures. GW ALL TEMP The hard and highly greasy wax absorbs very well GW POLAR -8/-25°C | 18/-13°F into the ski base. GW ALL TEMP is an excellent mul- A wide operating range, good wear resistance – an tipurpose glide wax for all snow types at mild winter excellent choice for coarse substrate and creaky temperatures. For base preparation of new, stone- snow in cold winter days. ground, or ‘overhauled’ skis. Forms a ‘greasy’ and shiny surface in 1-2 treatments.

Note: • GW glide waxes are high-quality hydrocarbons waxes without any fluorocarbons. • Affordable glide waxes for recreational skiers, especially in cold conditions.

°C GLIDE WAXES 90G 180G 540G +10/-1 GW WET 325-GWW90 327-GWW180 328-GWW540 0/-5 GW MID 325-GWM90 327-GWM180 328-GWM540 -1/-10 GW COLD 325-GWC90 327-GWC180 328-GWC540 -8/-25 GW POLAR 325-GWP90 327-GWP180 328-GWP540 -1/-25 GW GRAPHITE 325-GWG90 327-GWG180 328-GWG540 GW ALL TEMP 325-GWA90 327-GWA180 328-GWA540

14 15 Package size: 80ML Package size: 80ML

Liquid waxes absorb effectively into the base and retains the performance of the ski base longer than hot melted paraffins. On its best when used on top of Liquid Base or traditional paraffin waxes. LIQUID PRODUCTS LIQUID PRODUCTS

Vauhti RC Speed liquid waxes are outcome of long term product development and testing. They are based on Vauhti UF liquid glide waxes are based on the ingredients used in the Vauhti UF series and high-quality , ingredients from the highest level of chemical research used in UF series combined with top coatings. All these which give excellence performance and good durability to the product. Liquid UF waxes are an excellent product together give the products high speed racing performance, high hydrophobicity, superb durability in all snow to be used as the base wax or mixed together with the fluorocarbon blocks. condititions.

50/30°F 27/5°F 341-LRCSW RC SPEED WET +10/-1°C 341-LRCSC RC SPEED COLD -3/-15°C 341-LUFW UF WET +10/-1°C | 50/30°F 341-LUFC UF COLD -3/-15°C | 27/5°F For all snow types from wet snow to damp snow to Suitable for all snow types on cold conditions. Suitable for all snow types from wet snow to damp Suitable for all snow types on cold conditions. zero degrees. snow down to zero degrees. 36/25°F 41/-4°F 341-LRCSM 341-LUFM RC SPEED MID +2/-4°C 341-LRCSLDR RC SPEED LDR +5/-10°C UF MID +2/-4°C | 36/25°F 341-LUFLDR UF LDR +5/-10°C | 41/-4°F For all snow types, especially on new snow and damp Suitable for all snow types, especially on old and man- Suitable for all snow types, especially on new snow Suitable for all snow types, especially on old and man- snow. made snow. and damp snow. made snow.

16 17 Package size: 80ML Package size: 80ML

Vauhti HF liquid glide waxes are based on the ingredients used in the Vauhti HF series and high-quality Vauhti GW liquid glide waxes are based on the ingredients used in the Vauhti racing paraffins and high- solvents, which give excellence performance and good durability to the product. Liquid HF waxes are an ex- quality solvents, which give excellence performance and good durability to the product. They do not contain cellent product to be used as the base wax or mixed together with the fluorocarbon blocks. fluorocarbons. On its best when used on top of Liquid GW Base wax. LIQUID PRODUCTS LIQUID PRODUCTS 341-QHFW HF WET +10/-1°C | 50/30°F Suitable for all snow types from wet snow to damp snow down to zero degree.

341-QHFM HF MID +1/-8°C | 34/18°F suitable for all snow types on damp snow.

341-QHFC HF COLD -2/-15°C | 34/18°F Suitable for cold and fine grained snow.

341-LGWW GW WET +10/-1°C | 50/30°F 341-LGWC GW GOLD -2/-15°C | 34/18°F Suitable for all snow types from wet snow to damp Suitable for all snow types on cold conditions. snow down to zero degrees. 341-LGWP GW POLAR -2/-20°C | 28/-4°F 341-LGWM GW MID 0/-5°C | 32/23°F Suitable for all snow types on cold and hard snow con- Suitable for all snow types, especially on new snow ditions. and damp snow.

INSTRUCTIONS FOR LIQUID GLIDE WAXES: Tips to improve the durability and glide sensitivity: Vauhti LF liquid glide waxes are based on the ingredients used in the Vauhti racing paraffins and high- Liquid glide waxes can be applied on ski base quick Tip 1. Attach the dried product by rubbing with nat- quality solvents, which give excellence performance and good durability to the product. On its best when and easy. One waxing endures even 40 km depend- ural cork, you can also use roto cork. Using cork will used on top of Liquid Base wax. ing on the snow conditions. Liquid glide waxes can improve the product’s durability. Brush the ski base be used on cross-country skis, alpine skis and snow- thoroughly with a nylon brush; if necessary, use a boards. fine-bristled metal brush first. • Shake the bottle well. Tip 2. Add Vauhti Fluorocarbon Block on ski base waxed with Liquid Glide Waxes. Rub with natural • Press the sponge against the ski base and squeeze cork or Roto cork, and brush thoroughly, using a ny- 341-QLFW the bottle lightly, which makes the bottle valve LF WET +10/-1°C | 50/30°F lon brush. The glide sensitivity of the ski will increase open and the product can trickle onto the sponge. Suitable for all snow types from wet snow to damp significantly. snow down to zero degrees. • Apply a thick layer by rubbing it back and forth on Tip 3. Rub a layer of Vauhti Fluorocarbon Block on the the gliding surfaces. base, and apply a generous amount of liquid glide wax 341-QLFM LF MID +1/-8°C | 34/18°F • Allow to dry completely. on top of this layer, mixing the two products into one ”porridge”. Let dry completely; the longer, the better. Suitable for all snow types, especially on new snow • Brush thoroughly, using a nylon brush. and damp snow. Brush heavily, using a nylon brush. You can also extend durability by rubbing the “porridge” with a natural cork or roto cork. Brush thoroughly with a nylon brush; if 341-QLFP LF POLAR -2/-20°C | 28/-4°F necessary, use a fine-bristled metal brush first. Suitable for all snow types on cold conditions.. INSTRUCTIONS FOR LIQUID WAXES FOR LIQUID INSTRUCTIONS

18 19 Package size: 80ML

Vauhti liquid base waxes contain high quality polyethylene waxes which makes a hard, dirt-resistant and wear-resistant coating on the ski base under the liquid glide waxes or traditional paraffins. LIQUID BASE WAXES FOR GLIDE ZONE WAXES LIQUID BASE 341-LHFBA HF BASE 341-LGWBA GW BASE High fluorocarbon base wax for glide zone. Fluor free base wax for glide zone. 341-LABA ALPINE BASE Fluorinated base wax for alpine skis.

INSTRUCTIONS FOR LIQUID BASE WAXES:

• Shake the bottle well. • Press the sponge against the ski base and squeeze the bottle lightly, which makes the bottle valve open and the product can trickle onto the sponge. • Apply a thick layer by rubbing it back and forth on the gliding surfaces. • Allow to dry completely, the longer the better. • Brush thoroughly, using a nylon brush. • Spread layer for snow conditions suitable wax on top of the base wax, let dry and brush. • Skis are ready for skiing.

Use liquid base waxes regularly for new or machine grinded skis, and now and then during the winter to get the best benefit and durability from liquid glide waxes.

20 21 Package size: 80ML Package size: 80ML Vauhti Crown & Zero skis maintenance agents are developed especially for crown & zero skis. You can Liquid grip waxes are suitable for all snow types and they can be applied on ski base easily without any find products in every snow conditions and they are tools. You get thin and even layer easily with sponge and the waxes are very durable. Apply and let it dry per- easy to use and doesn’t contain any fluorocarbons. fectly.

313-LCGCZ CLEAN & GLIDE Cleaning and maintenance agent for crown & zero skis. Use always when the snow is dirt and wet.

Instructions for CLEAN & GLIDE: • Clean the base with Vauhti Clean & Glide liquid when they become dirty. • Let it dry for approximately 2 minutes.

LIQUID GRIPS WAXES • Brush the base with nylon brush. • Recommended is that you repeat this treatment af- ter every training.

341-LAICZ ANTI-ICE +2/-5°C | 36/23°F Anti-ice agent for crown & zero skis. Use always on 341-LGGCZ new snow close to zero temperature. GRIP & GLIDE -2/-20°C Grip & glide for crown & zero skis in cold snow. Instructions for ANTI-ICE: Instructions for GRIP & GLIDE, when the temperature • Clean the base with Vauhti Clean & Glide liquid is -1°C or colder: when they become dirty. • Clean the base with Vauhti Clean & Glide liquid • Shake, and apply a thin layer from the tip to the when they become dirty. tail. • Shake, and apply a thin layer from the tip to the CROWN & ZERO MAINTENANCE AGENTS CROWN & ZERO MAINTENANCE • Let it dry for approximately 5-10 minutes. tail. • Prevents the base from freezing on new and damp • Let it dry for approximately 5-10 minutes. snow. 341-LGSBAS GS BASE SUPER 341-LKSBA KS BASE • Apply another thin layer if needed after every • Notice: When temperature rises to zero or warmer, training. Liquid base grip wax All temp liquid base klister. Use as base for other grip crown & zero skis are on their best without any Durable all temp liquid base wax. Use as base for waxes or klisters. • Grip & Glide is improving the functionality, both treatment. 20/-4°F all other grip waxes. grip and glide and reduces the risk of icing. 50/30°F • Notice: When temperature rises to zero or warm- 341-LGSV GS VIOLET -1/-7°C | 30/19°F 341-LKSU KS UNIVERSAL +10/-1°C er, crown & zero skis are on their best without any Liquid grip wax for fresh and fine natural snow in Universal liquid klister for wide range of snow condi- treatment. Then remove Grip & Glide from the ski mild winter conditions. tions from wet and damp snow to zero degrees. base with Vauhti grip remover liquid.

341-LGSC GS CARROT -2/-20°C | 28/-4°F Liquid grip wax for cold winter conditions. Especially old 313-FCZ and man-made snow. FC ANTI-ICE +2/-5°C | 36/23°F Instructions on grip wax: A 100 % fluorocarbon product is very effective in re- • Spray a thin, even layer of FC ducing grip zone icing on all types of waxless clas- Anti-Ice from the distance of ap- INSTRUCTIONS FOR QUICK GRIPS: sic skis used for racing or recreational skiing. FC An- prox. 10 cm onto dry grip wax at ti-Ice is packed in a spray bottle. It is an excellent top room temperature or on klister Always apply suitable liquid grip base wax first. coat for klisters and soft grip waxes in wet and 0 °C cooled outside. • Shake the bottle for a few seconds. conditions. • Let it dry for 5 minutes. • Press the sponge against the ski base and press the bottle lightly, which makes the bottle valve open and Instructions: • The product does not reduce the wax will be poured to the sponge. • Clean the grip zone with Vauhti Grip Remover. the grip properties, prevents dirt accumulation and risk of icing. • Spread thin and even layer on the grip zone of the ski base. Let dry perfectly, at least 30min. • Roughen the grip zone with sand paper (# 100), • When the wax has dried, add layer of suitable liquid grip to the grip zone and let it dry perfectly. if necessary. • You can apply another layer of wax if needed, when the first layer is dried out a bit. The wax does not need • Shake well the bottle. to be evened out. ATTENTION! When you apply more than one layer of wax the drying takes more time. • Spray a thin, even layer of FC Anti-Ice onto the Package size: 50ML • Let the skis cool down outside before skiing. grip zone from the distance of approx. 10 cm. You can use traditional grip waxes or klisters on top of liquid grip waxes, but don’t apply liquid grip waxes • Let it dry for 5 minutes. on top of the hard grip waxes or klisters! 22 23 Package size: 80ML Package size: 45G

Basic grip wax series for all snow types.

357-GSR 357-GSBA

SKIN-SKI PRODUCTS SKIN-SKI GS RED +1/-2°C | 34/28°F GS BASE AT Aluminium-containing grip wax for all types of snow. A base wax also suitable for fresh snow conditions. Good durability, excellent glide properties. Can also 357- GSC GS CARROT -1/-6°C | 30/21°F be applied cold, without ironing. Grip wax for a wide range of weather conditions; on 357-GSBAS GS BASE SUPER GS SYNTHETIC GRIP WAXES GRIP GS SYNTHETIC old snow, almost down to 12°C. Excellent durability. Use the Base Wax Super on 357- GSB | 23/5°F coarse and abrasive snow, as well as on artificial GS BLUE -5/-15°C snow or wet fresh snow at temperatures around 0°C. All-purpose grip wax for cold winter conditions. Patented composition of Vauhti Skin Ski Cleaner has been developed especially for cleaning the skin strip of the skin skis from any build-up dirt such as grip waxes from the ski track during ski use. Effective, but gen- tle. The present composition does not comprise aliphatic and aromatic hydrocarbon solvents as their pres- 357- GSG GS GREEN -10/-30°C | 14/-22°F ence even in small amounts could lead to detachment of the skin strip from the base of the ski. Grip wax for very cold winter conditions. Intended for coating of softer grip waxes (Carrot or Blue) at 341-QSC SKIN SKI CLEANER INSTRUCTIONS FOR HF SKIN SKI CARE: temperatures below -10°C. Ainutlaatuinen koostumus puhdistaa pitokarvan • Clean the skin strip with Vauhti Skin Ski Cleaner. tehokkaasti latu-urasta tarttuneista epäpuhtauksista, • Shake well the bottle in position up-side-down kuten suksivoiteista. EI ENGLANNIKSI TÄTÄ (sponge down). INSTRUCTIONS FOR SKIN SKI CLEANER: • Press the sponge lightly against the skin strip and • Shake well the bottle. press the bottle lightly, which makes the bottle valve open and the care product will be poured Package size: 45G • Spread on the skin strip. to the sponge. • Wipe clean with cloth. • Spread an even layer on the skin strip with back and forth movement. This back and forth move- ment spread the care product smoothly. 341-QHFSCHF SKIN SKI CARE RED +10/-5°C | 50/23°F For wet and dirty snow, also damp snow to zero de- grees. It reduces build-up of impurities from the ski tracks to skin strips, and prevents the risk of icing of skin strips, thus maintaining and improving both Among the raw materials used in the Tar Grip waxes is pit tar made from Finnish pine. In addition to the grip and glide of the skin skis. pleasant aroma, tar waxes have a wide operating range and more convenient waxing properties. The waxes are especially suitable for recreational skiers, although their qualities are attractive for even the most demanding racers as well. GT TAR GRIP WAXES TAR GT 341-QHFSCBHF SKIN SKI CARE BLUE 367-GTR GT RED +1/-1°C | 34/30°F 367-GTC GT CARROT -1/-6°C | 30/21°F -5/-20°C | 28/-4°F For fresh snow, at temperatures marked on the Recreational skier’s all-purpose grip for mild winter packaging. If the snow is old or coarse and the conditions. Easy to apply and durable grip wax with For all snow types on cold conditions. It improves track is well-used, the grip wax can be used down a wide operating range; if the ski track is hard and the glide on cold and dry snow. to approx. -3°C. the snow is a few days old, the operating temper- atures range from -1°C all the way down to -12°C.

367-GTG | 21/-4°F 367-GTP GT PINK 0/-4°C | 32/25°F GT GREEN -6/-20°C Optimum temperature range between GT RED and General purpose grip wax for cold weather condi- GT CARROT. Especially for fresh snow, but also to tions and all snow types. coat klisters on mixed snow conditions. 24 25 !!

Package size: 45G +3 C or warmer Wet, new or fine Apply thin and even layer of KF Base klister, let it cooldown. grained snow. Apply thin layer of KF Violet klister, let it cooldown. Apply thin layer of KF Universal klister. Apply layer of KF Red klister, let it cooldown. You can adjust the amount of KF Red klister by snow conditions. Use FC Grip powder on top. NOTICE! Don’t use topping in long distance!

+3 C or warmer Old or hard wet snow Apply thin and even layer of KF Base klister, let it cooldown. conditions. Apply thin layer of KF Violet klister, let it cooldown. Apply thin layer of KF Universal klister. Mix and apply layer of KF-universal and KF-Red klisters 50/50 Apply layer of KF Red klister, let it cooldown. NOTICE! Don’t use topping, let it cooldown and get hard. Excellent performance of GF fluorinated grip waxes comes from a revolutionary ingredient that reacts to +3/+1 C New wet snow or old Apply thin and even layer of KF Base klister, let it cooldown. or man-made snow. temperature precisely. Thanks to this innovation, the risk of the grip wax icing in sub-zero temperatures is Apply thin layer of KF Violet klister, let it cooldown. reduced considerably and the grip properties are exceptional. GF grip waxes have wide operation range, Apply thin layer of KF Universal klister. which makes them a good choice also for recreational skiers. Apply layer of KF Red klister, let it cooldown. Apply layer of GF Red grip wax, even by pressing with your thumb. 347-GFR 347-GFC GF RED +2/-1°C | 36/30°F GF CARROT -2/-12°C | 28/10°F Use FC Grip powder or FC Mid liquid. NOTICE! Don’t use topping in long Custom wax for 0°C conditions. Best in damp or A viscous, all-purpose wax that sticks extremely well distance! variable, problematic conditions, at temperatures to your skis at sub-zero temperatures. Works best +1/0 C New moist snow. Apply thin and even layer of KF Base klister, let it cooldown. around 0°C, all snow types. GF RED can be used on old or coarse snow. The best gripping temper- Apply thin layer of KF Violet klister and mix few of drops of KF Universal klister, let GF FLUORINATED GRIP WAXES GRIP GF FLUORINATED for coating klisters; it can also be mixed with oth- atures begin at approx. -2°C and extend down to it cooldown. er grip waxes. approx. -12°C on a hard-packed trail. The wax can Apply 1-2 thin layer of GF Red grip wax, even by pressing with your thumb. be used alone or as a base wax for other GF prod- ucts, for which it is an excellent choice. The wax is ex- Use FC Mid liquid on top. NOTICE! Don’t use topping in long distance! 347-GFS GF SILVER +1/-4°C | 33/25°F tremely durable. +1/0 C Old or man-made Apply thin and even layer of KF Base klister, let it cooldown. A grip wax containing aluminium and usable in a snow. wonderfully wide range of weather conditions. Due Note! GF CARROT is specifically designed for old, Apply thin layer of KF Violet klister, let it cooldown. to its viscosity, it can be used as a base wax for GF coarse snow. For fresh snow, at -2 / -5°C, the best Apply thin layer of KF Universal klister. RED, for example. An excellent choice for condi- option for grip wax is the GF VIOLET developed for Use FC Grip powder on top. NOTICE! Don’t use topping in long distance! tions where the snow temperature clearly varies be- such conditions. -1/-2 C New snow Iron thin layer of GS Base Super, let it cooldown a bit. tween just above and just below 0°C. In case of old Apply 1-2 thin layers of GF Silver grip wax, even by pressing with thumb. snow, the wax can be used at temperatures all the 347-GFB GF BLUE -3/-10°C | 27/14°F way down to -4°C. Apply 2-4 layers of GF Pink grip wax, even with synthetic cork. Complementing grip wax for GF CARROT. Use if the snow is too fine for GF CARROT. Works best on fine -1/-2 C Old, hard or man- Apply thin and even layer of KF Base klister, let it cooldown. 347-GFP made snow. GF PINK 0/-5°C | 32/23°F and old snow, as well as on coarse snow, improv- Apply 2-3 layers of GF Silver grip wax, even with synthetic cork. If snow is moist: A special wax for new snow. Best in dry or variable ing the glide of viscous grip waxes. Works in a wide Apply 1-2 layers of GF Red grip wax on top of base klister, even and let it new snow conditions. Softer content than in GF VIO- range of conditions; on old snow, almost down to cooldown. LET gives better grip properties on soft track. 20°C. Apply 2-3 layer of GF Silver grip wax, even with synthetic cork. -2/-7 C New snow. Iron thin layer of GS Base AT, let it cooldown. 347-GFV 347-GFG !! GF VIOLET -1/-7°C | 30/19°F GF GREEN -4/-20°C | 25/-4°F Apply 2-4 layers of GF Pink grip wax, even with synthetic cork. A wax developed for fresh, fine snow in mild winter An all-purpose wax for winter conditions. The wax When fine grained snow is transformed, use GS Base Super as base wax. can be used at temperatures beginning from ap- conditions. With this grip wax, you will prevail over -2/-7 C Old, hard or man- Iron thin layer of GS Base Super, let it cooldown a bit. the difficult fresh snow (‘Violet’) conditions. The grip prox. -6°C and all the way down to -20°C, if the snow made snow. Apply layer of GF Violet grip wax, even and let it cooldown. properties of GF VIOLET grip wax set in already at is not completely fresh. Suitable for all snow types. If

approx. -0.5 / -1°C. The glide properties of GF VIO- you want to maximize the durability and grip condi- SKIERS ACTIVE & FOR RACING RECOMMENDATIONS WAX GRIP Apply another layer of GF Violet grip wax, even with synthetic cork. LET are exellent in new snow -5 C and in old snow till tions, at temperatures between 8°C and -20°C, use Apply 2-3 thin layers of GF Carrot grip wax, even with synthetic cork. GF CARROT as a base wax. -10 C. This is most evident at temperatures -2°C and -6/-12 C New snow. Iron thin layer of GS Base AT, let it cooldown. below. You can use GF VIOLET on fresh snow and on Apply layer of GF Carrot grip wax, even and let it cooldown. old snow, at temperatures down to -5°C and 10°C, respectively, and still enjoy excellent glide proper- Apply on cooled surface 2-3 layers of GF Blue grip wax, even with synthetic cork. ties. -12/-20 C New snow. Iron thin layer of GS Base AT, let it cooldown. Apply layer of GF Blue grip wax onto still warm base wax, even and let it There is no freezing risk regardless of the snow type. cooldown. The performance is optimal in conditions where Apply another layer of GF Blue grip wax, even with synthetic cork. the lower sections of the track are near 0°C and the higher sections are clearly below 0°C. Apply thin layer of GF Green grip wax, even with synthetic cork. -7/-20 C Old, hard or man- Iron thin layer of GS Base Super, let it cooldown. Note! GF VIOLET is at its best on fresh or fine snow. made snow. Apply layer of GF Carrot grip wax onto still warm base wax, even and let it For coarse snow and trails that are packed hard with cooldown. snow (-3°C and colder), we recommend GF CAR- Apply on cooled surface 2-3 layers of GF Blue grip wax, even with synthetic cork. ROT, which has been developed specifically for these conditions. Apply layer of GF Green grip wax, even with synthetic cork.

26 27 !! Package size: 60G

+3 C or warmer Wet, new or fine Apply thin and even layer of KF Base klister, let it cooldown. grained snow. Apply thin layer of KS Violet klister, let it cooldown. Apply thin layer of KS Universal klister. Apply layer of KS Red klister, let it cooldown. You can adjust the amount of KS Red klister by the snow conditions.

+3 C or warmer Old or hard wet Apply thin and even layer of KF Base klister, let it cooldown. snow conditions. Apply thin layer of KS Violet klister, let it cooldown. Apply thin layer of KS Universal klister. Apply layer of KS Red klister, let it cooldown.

+3/+1 C Wet new snow or old Apply thin and even layer of KF Base klister, let it cooldown. or man-made snow. Apply thin layer of KS Violet klister, let it cooldown. Apply thin layer of KS Universal klister. Apply layer of KS Red klister, let it cooldown. Apply GT Red grip wax, even by pressing with your thumb..

+1/0 C New moist snow. Apply thin and even layer of KF Base klister, let it cooldown. Apply thin layer of KS Violet klister, and mix couple of drops KS Universal klister, let it cooldown. (KF) KLISTERS FLUORINATED Apply 1-2 thin layer of GT Red grip wax, even by pressing with your thumb.

+1/0 C Old or man-made Apply thin and even layer of KF Base klister, let it cooldown. snow. Apply thin layer of KS Violet klister, let it cooldown. Apply thin layer of KS Universal klister. 82-K690KF BASE +10/-20°C | 50/-4°F 82-K692KF BLUE +1/-15°C | 34/5°F -1/-2 C New snow. Iron thin layer of GS Base Super, let it cooldown a bit. A base klister for all klisters (and grip waxes, in For coarse conditions, as well as for wet, coarse, and coarse conditions). No gripping properties; a slip- artificial snow. An excellent base wax for KF VIOLET Apply 1-2 thin layer of GS Red grip wax, even by pressing with your thumb and let it pery base wax ensuring proper adherence and max- and K-Universal klisters in wet conditions. Also suit- cooldown. imum durability of the ensuing top wax layers. App- able for base wax when using GF-grip waxes at tem- Apply 1-2 layer of GT Pink grip wax, even with synthetic cork. ly as the bottommost layer when using K-klisters or peratures around 0°C. Clearly better grip properties -1/-2 C Old, hard or man- Apply thin and even layer of KF Base klister, let it cooldown. other klisters. as compared to regular blue klister. made snow. Apply 2-3 layers of GS Red grip wax, even with synthetic cork. 82-K698 KF RED +10/+2°C | 50/36°F 82-K696 -2/-7 C New snow. Iron thin layer of GS Base AT, let it cooldown. KF UNIVERSAL +10/-7°C | 50/19°F Special klister for wet conditions. Excellent grip and For all snow types, from wet snow conditions to tem- Apply layer of GS Carrot grip wax. glide properties even if the snow is soaked with wa- peratures around 0°C. An excellent wax for wet/ic- Apply 2-4 layers of GT Pink grip wax, even with synthetic cork. ter. A convenient product for improving the grip of ing conditions if used together with GF grip waxes. KF UNIVERSAL. -2/-7 C Old, hard or man- Iron thin layer of GS Base Super, let it cooldown a bit. In case of coarse snow, the operating range extends made snow. Apply layer of GS Carrot grip wax onto still little warm base wax, even and let it all the way down to -7°C. Contains aluminium ox- cooldown. 82-K694KF VIOLET +3/-8°C | 37/18°F ide and tar, which extend the operating range of the Apply 2-3 thin layers of GS Carrot grip wax, even with synthetic cork. For coarse wet snow and coarse conditions at var- klister and ensure elasticity of the klister surface at ying temperatures both above and below 0°C. An varying temperatures both above and below 0°C. -6/-12 C New snow Iron thin layer of GS Base AT, let it cooldown a bit. excellent klister for mixtures of artificial and natu- Apply layer of GT Pink grip wax, even and let it cooldown. ral snow. If applied in a thin layer, suitable for dryish Apply on cooled surface 2-3 layer of GT Carrot grip wax. fresh snow as well. In case of coarse snow, the opera- ting range extends all the way down to -10°C. -12/-20 C New snow Iron thin layer of GS Base AT grip wax, let it cooldown a bit. Apply layer of GT Carrot grip wax onto still little warm base wax, even and let it cooldown. !! GRIP WAX RECOMMENDATION FOR ACTIVE AND RECREATIONAL SKIERS AND RECREATIONAL ACTIVE FOR RECOMMENDATION WAX GRIP Apply another layer of GT Carrot grip wax, even with synthetic cork. Apply thin layer of GT Green grip wax, even with synthetic cork..

-7/-20 C Old, hard or man- Iron thin layer of GS Base Super, let it cooldown a bit. made snow. Apply layer of GS Carrot grip wax onto still little warm base wax, even and let it cooldown. Apply on cooled surface 2 layers of GS Blue grip wax, even with synthetic cork. Apply a layer of GS Green grip wax.

28 29 Package size: 60G CLEAN & GLIDE PACKAGE SIZES 80, 200 AND 500 ML and WIPE Effective cleaning and maintenance agent for glide zones. Vauhti Clean & Glide cleans effectively the glide zones from dirt, creates a hard, dirt-resistant coating, and improves the performance of the glide waxes on top of it. Always start a new waxing by cleaning the ski base with Clean & Glide. Ski waxes and fluorocar- CLEAN bon powders adsorbs only to clean ski base.. &GLIDE WIPE

FLUORINATED CLEANING AGENT FOR GLIDE ZONE CLEANING AGENTS

3.

MADE IN FINLAND SYNTHETIC KLISTERS (KS) KLISTERS SYNTHETIC

CLEAN & GLIDE FLUOR FREE PAKKAUSKOKO 80 ML 375-KSR KS RED +10/+2°C | 50/36°F 375-KSB KS BLUE 0/-15°C | 32/5°F For slightly coarse snow and fresh wet snow con- For coarse icy conditions. Extremely well suited as ditions. a base wax for grip waxes on coarse and icy snow. Clean & Glide FF on tehokas fluoriton puhdistus- ja huoltoaine luistopinnoille. Se puhdistaa luistopinnat tehokkaasti ja huoltaa suksen pohjaa jättäen pintaan 375-KSV KS VIOLET +1/-10°C | 34/14°F 375-KSUKS UNIVERSAL +4/-7°C | 39/19°F liukkaan ja kovan vahakerroksen. For coarse wet conditions, just above or below 0°C. For coarse wet snow conditions and variable coarse conditions. TÄTÄ EI TAINUT OLLA WORDISSÄ ENKUKSI... Some tips to determine the right thickness for a klister layer Fresh snow: always thin and even klister layer. Fine-grained snow: thin and even klister layer. Old grainy snow: moderate klister layer; if the ski track is soft, apply a thicker klister layer Käyttöohje: Coarse icy snow: medium klister layer, coated with thin grip wax layer. Aloita uusi luistovoitelu aina puhdistamalla pohjat Clean & Glidella. Tämä parantaa tulevien luistovoiteiden toimintaa, sillä vahat ja fluorituotteet kiinnittyvät vain puhtaisiin pohjiin. Samalla ehkäistään pohjassa olevan hidastavan lian sekoittuminen uuteen voiteluun. Ravista huolellisesti.

41/-4°F • Levitä Vauhti-kiillotusliinaan. 20-GFP7FC GRIP POWDER +5/-20°C Package size: 20G • Pyyhkäise pohjat puhtaaksi. A topcoat of grip waxes made of fluorocarbons and • Harjaa nylonharjalla 1-2 min kuluttua. extremely fine graphite. Grip powder is suitable for all weather conditions and one can coat hard grip waxes and klisters with it. The powder improves glide proper- ties of the grip wax without reducing the grip. The coating improves the elasticity of the grip wax under it and by that it improves the grip and reduced risk of catching. GRIP REMOVER PACKAGE SIZES 80, 500, AND 1000 ML GRIP POWDER Instructions: • For removal of old grip waxes and cleaning of dirty • Spread a thin, even layer either on both ends of the grip zone or along its full length. ski bases. • Apply the powder coating to the grip wax at room temperature or cool down the skis outside before. • Vauhti Grip Remover is especially suitable for cleaning the grip zone of waxless skis. In order to • Adhere the powder to the wax by a few light strokes with synthetic cork or rub it in lightly by the palm of function correctly the grip zone of waxless skis re- your hand. quire regular cleaning to avoid the deposition of • With these different techniques one can adjust the amount and the penetration depth of the powder to the maintenance agents and to remove the dirt the grip wax. picked up from the trail. 30 31 SCRAPERS HARJAT TOOLS TOOLS

115-01010 115-01020 115-01025 115-01035 115-01040 NYLON NYLON NYLON NYLON/ POWDER / SMALL FINISHING BRASS HORSE HAIR

100-00810 100-00820 100-00830 100-00840 100-00870 ACRYL ACRYL ACRYL GROOVE SCRAPER SCRAPER SCRAPER SCRAPER SCRAPER 3MM 5MM SPECIAL

115-01050 115-01060 115-01015 115-01070 115-01071 NYLON/ METAL NYLON/ ROTO/ ROTO/ CLOTHS CORKS BRASS CORK NYLON CORK

115-01072 2000-ABHH 2000-ABN 2000-ABM ROTO/ ALPINE OVAL/ ALPINE OVAL/ ALPINE OVAL/ HORSE HAIR HORSE HAIR / MIX NYLON METAL

105-00910 105-00920 SYNTHETIC CORK NATURAL CORK for leveling grip waxes for rubbing fluorocarbon coatings 110-00960 and liquid glides POLISHING CLOTH 130-01370 20M OR 10M ROLL WAX BOX 115-01703 115-01704 ROTOAKSELI/ ROTOAKSELI • lightweight and durable, with different compartments 100MM COMBI / 200MM • specially treated material that reduces the adhesion of waxes and facilitates cleaning 130-01611 • equipped with a lock APRON

105-00911 105-00924 SYNTHETIC CORK WITH SANDPAPER #80, 3KPL SANDPAPER for waxless skis on wet snow 110-00950 WAX IRONS for roughening the grip zone of wax- FIBERTEX 119-V1400 119-V1000 119-V1600 less skis and waxable skis 105-00921 SANDPAPER #100, 3KPL ECONOMY PROFESSIONAL RACING DIGITAL for waxless skis on cold snow and for • high power, 1000 W • extra thick 35mm bottom waxable skis on wet snow structure with excellent heat • thick double bottom struc- storing capacity 105-00922 ture with excellent heat stor- SANDPAPER #120, 3KPL ing capacity • presice thermometer 110-00970 for waxable skis on cool snow. • accurate thermostat • presice digital control TEFLON SHEET • feels good in your hand, • for professional use a pleasure to use 32 33 SKI HOLDERS

2000-3071 TOOLS ADJUSTABLE 2000-5005N 2000-3090 BASE SHARP PRO SHARP 2000-3091 0,5°–1,5° PRO CLAMP RACING FILE CLAMP 2000-5120 130-01510 130-01511 130-01512 SPARE BLADE SKI CLIPS SKI HOLDER SKI CLIPS ALPINE TOOLS STANDARD ALPINE STRUCTURING TOOL 2000-5125 SPARE BLADE R3

2000-4002N 2000-5130 EASY SHARP (BASIC) SPARE BLADE ROUND

2000-1070 SKI VISE RACE

130-8001 130-8003 NORDIC SHARP STRUCTURING TOOL LINEAR ROLLER MEDIUM 2000-3062 2000-5002 2000-5006 FILE GUIDE ERGO SHARP RACING SHARP BAGS & DRINKBELTS ALUMINIUM 88° 2000-3063 2000-690 FILE GUIDE SKI VISE QUICK ALUMINIUM 87°

2000-3004 SHARP SIDEWALL PLANNER 2000-TPA 2000-RB 130-01531 130-01529 130-01533 130-01527 130-01525 TAPE RUBBER BANDS VAUHTI TRAVEL VAUHTI BAG VAUHTI VAUHTI DRINK-BELT BAG BACKPACK / BACKPACK WITH BOTTLE FILES LARGE 2000-10100 DIAMOND FILE L=100mm GRIT=100 extra coarse 2000-10200 DIAMOND FILE L=100mm GRIT=200 coarse 2000-10400 DIAMOND FILE L=100mm GRIT=400 medium 2000-10600 DIAMOND FILE L=100mm GRIT=600 fine 2000-11000 DIAMOND FILE L=100mm GRIT=1000 extra fine 130-01523 130-01535 130-01537 130-01537 THERMO SKI HARNESS SKI BAG SKI BAG 2000-87010010 PRO RS FILE L=100mm Z/cm=210 coarse DRINKBELT FOR 3 PAIRS FOR ALPINE SKIS 1 PAIR 2000-87010013 PRO RS FILE L=100mm Z/cm=213 medium 2000-87010016 PRO RS FILE L=100mm Z/cm=216 fine WAX BENCH 2000-810100 RACE FILE L=100mm TPI=13 medium 2000-817813 PROFES. FILE Chrome L=200mm Z/cm=13 coarse 400-VVT10 400-670 2000-817816 PROFES. FILE Chrome L=200mm Z/cm=16 medium WAX BENCH WITH ONE PROFILE SKI VICE NORDIC 2000-11000 2000-824620 PROFES. FILE Chrome L=150mm Z/cm=20 fine DIAMOND FILE 2000-82512013 CARVING FILE Chrome L=120mm Z/cm=13 coarse #1000 2000-82512016 CARVING FILE Chrome L=120mm Z/cm=16 medium 2000-82512020 CARVING FILE Chrome L=120mm Z/cm=20 fine 2000-8161008 SUPERCROSS FILE L=100mm Z/cm=8 extra coarse 2000-54130001 SUPERCROSS FILE L=300mm TPI=9 extra coarse 2000-FB910 FILE BRUSH 34 MADE IN FINLAND SINCE 1912

In cooperation with

Vauhti Speed oy | Joensuu, FINLAND | tel +358 (0) 10 3465 310 | fax +358 (0) 10 3465 319 | www.vauhti.fi | vauhti@vauhti.fi 36