DOCSLIB.ORG

Ductile Iron Valves Product Range

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ductile Iron Valves Product Range Ductile Iron Valves Product Range Please note that all products within this catalogue are subject to availabilty. Contact Vinidex for stock availability. Ductile Iron Valves VALVES PAGE VALVES GATE VALVES GATE VALVE: RESILIENT SEATED FL - FL PN16 1 GATE VALVE: RESILIENT SEATED FL - FL PN16 T/E 1 GATE VALVE: RESILIENT SEATED FL - FL PN25 2 GATE VALVE: METAL SEATED FL - FL PN35 2 GATE VALVE: RESILIENT SEATED SOCKET - SOCKET 3 GATE VALVE: RESILIENT SEATED SPIGOT - SPIGOT 3 GATE VALVE: - SERVICE CONNECTION - PE-PE 3 GATE VALVE: SOCKET - FLANGE RS 4 GATE VALVE: RESILIENT SEATED FL-FL C/W MOUNT FLANGE 4 GATE VALVE ACTUATOR 4 GATE VALVE: RESILIENT SEATED FL-FL OS&Y PN16 4 GATE VALVE: PE-PE RESILIENT SEATED 5 GATE VALVE: RESILIENT SEATED PE-PE 5 BRASS GATE VALVES - F&F - APPROVED 6 BRASS GATE VALVES - F&F - NON CERTIFIED - GENERAL PURPOSE 6 STAINLESS STEEL 316 - F&F - CERTIFIED 6 CHECK VALVES CHECK VALVES - SWING CHECK 7 CHECK VALVES - SWING CHECK C/W COUNTERWEIGHT 7 CHECK VALVES - FLEX CHECK 7 PROXIMITY SWITCH -MECHANICAL 7 CHECK VALVES - DUO/WAFER CHECK 8 CHECK VALVES - TILTING DISC 8 CHECK VALVES - BALL 8 ENGINEERED VALVES REDUCED PRESSURE ZONE ASSEMBLY 9 FLOWMETER - ABB WATERMASTER 9 WATER METER - DOMESTIC 9 WATER METER KITS - DOMESTIC SINGLE SERVICE 9 PRESSURE REDUCING VALVE 10 PRESSURE SUSTAINING & RELIEF VALVE 10 FLOW CONTROL VALVE 10 RESERVOIR LEVEL CONTROL VALVE 10 "Y" STRAINER - DI 11 "Y" STRAINER - BRASS 11 BUTTERFLY VALVES BUTTERFLY VALVE-WAFER-LEVER OPERATOR 12 BUTTERFLY VALVE-LUGGED-LEVER OPERATOR 12 BUTTERFLY VALVE-LUGGED-GEARBOX OPERATOR AB30L - AB10L 12 BUTTERFLY VALVE-FLANGED-LEVER OPERATOR AB13F 12 BUTTERFLY VALVE-FLANGED-GEARBOX OPERATOR - Seal On Body 13 BUTTERFLY VALVE-FLANGED-GEARBOX OPERATOR - Series 2000 Seal On Disc 13 PE SPACERS BUTTERFLY FLANGE TO SDR11 PE STUB 13 GEAR BOXES FOR BUTTERFLY VALVES - ROTORK MODEL AB-W 14 KNIFEGATE VALVES KNIFEGATE VALVE -CAST IRON BODY/SS BLADE 15 KNIFEGATE VALVE - SS316 BODY & BLADE 15 41 Ductile Iron Valves VALVES PAGE BALL VALVES BALL VALVE - SS316 - F&F - 1 PIECE 16 BALL VALVE - SS316 - F&F - 2 PIECE 16 BALL VALVE - SS316 - F&F - 3 PIECE 16 BALL VALVE - SS316 - FLANGED 16 BRASS BODIED BALL VALVES - INLINE 17 BRASS BODY BALL VALVES - INLINE - PLASSON NUT 17 BRASS BODY BALL VALVES - INLINE - ZETCO 17 BRASS BODY BALL VALVES METER CONNECTION KIT - ZETCO 17 BRASS BALL VALVES - RIGHT ANGLE 18 VALVES - MISC HANDWHEEL FOR NON RISING STEM GATE VALVE 19 ANCHOR LEGS FOR GATE VALVES 19 THRUST RESTRAINT STRAPS FOR SOC GATE VALVE 19 SHUT-OFF PADDLE SS316 19 STEM CAP FOR GATE VALVE 20 FLOODGATE FLAP VALVE - RING MOUNT 20 FLOODGATE/SCOUR FLAP VALVE - FLANGE MOUNT 20 VALVE SPINDLE EXTENSION FOR GATE VALVE - DI KEY AND CAP 21 5 VALVES Ductile Iron Valves GATE VALVE: RESILIENT SEATED FL - FL PN16 PRODUCT NOMINAL CODE SIZE CLOSING JOINT TYPE PRICE 81449 50 ACC FL-FL GATE VALVE - RS POA 81467 80 ACC FL-FL GATE VALVE - RS POA 81500 100 ACC FL-FL GATE VALVE - RS POA 81531 150 ACC FL-FL GATE VALVE - RS POA 81572 200 ACC FL-FL GATE VALVE - RS POA 81559 225 ACC FL-FL GATE VALVE - RS POA 81560 250 ACC FL-FL GATE VALVE - RS POA 81561 300 ACC FL-FL GATE VALVE - RS POA 81726 375 ACC FL-FL GATE VALVE - RS POA 78874 450 ACC FL-FL GATE VALVE - RS POA 64565 500 ACC FL-FL GATE VALVE - RS POA 78030 600 ACC FL-FL GATE VALVE - RS POA 81452 80 CC FL-FL GATE VALVE - RS POA 81502 100 CC FL-FL GATE VALVE - RS POA 81532 150 CC FL-FL GATE VALVE - RS POA 81573 200 CC FL-FL GATE VALVE - RS POA 81708 225 CC FL-FL GATE VALVE - RS POA 81709 250 CC FL-FL GATE VALVE - RS POA 81710 300 CC FL-FL GATE VALVE - RS POA 78876 375 CC FL-FL GATE VALVE - RS POA 78873 450 CC FL-FL GATE VALVE - RS POA 64566 500 CC FL-FL GATE VALVE - RS POA PN16 RESILIENT SEATED GATE VALVE COMPLIANT WITH AS2638.2 C/W STEM CAP OPERATOR FLANGES DRILLED IN ACCORDANCE WITH AS40878 FIG B5 - PN16 GATE VALVE: RESILIENT SEATED FL - FL PN16 T/E PRODUCT NOMINAL CODE SIZE CLOSING JOINT TYPE PRICE 81466 80 ACC FL-FL GATE VALVE - RS POA 81475 100 ACC FL-FL GATE VALVE - RS POA 81481 150 ACC FL-FL GATE VALVE - RS POA 81482 200 ACC FL-FL GATE VALVE - RS POA 81483 225 ACC FL-FL GATE VALVE - RS POA 81484 250 ACC FL-FL GATE VALVE - RS POA 81485 300 ACC FL-FL GATE VALVE - RS POA 81486 375 ACC FL-FL GATE VALVE - RS POA 81487 450 ACC FL-FL GATE VALVE - RS POA 81488 500 ACC FL-FL GATE VALVE - RS POA 81489 600 ACC FL-FL GATE VALVE - RS POA 81530 100 CC FL-FL GATE VALVE - RS POA 81533 150 CC FL-FL GATE VALVE - RS POA 81536 200 CC FL-FL GATE VALVE - RS POA 81534 225 CC FL-FL GATE VALVE - RS POA 81635 250 CC FL-FL GATE VALVE - RS POA 81535 300 CC FL-FL GATE VALVE - RS POA 81537 375 CC FL-FL GATE VALVE - RS POA PN16 RESILIENT SEATED GATE VALVE COMPLIANT WITH AS2638.2 C/W STEM CAP OPERATOR FLANGES DRILLED IN ACCORDANCE WITH AS2129 TABLE "E" 1 VALVES Ductile Iron Valves GATE VALVE: RESILIENT SEATED FL - FL PN25 PRODUCT NOMINAL CODE SIZE CLOSING JOINT TYPE PRICE 81425 50 ACC FL-FL GATE VALVE - RS POA 81426 80 ACC FL-FL GATE VALVE - RS POA 81454 100 ACC FL-FL GATE VALVE - RS POA 81427 150 ACC FL-FL GATE VALVE - RS POA 81428 200 ACC FL-FL GATE VALVE - RS POA 81429 225 ACC FL-FL GATE VALVE - RS POA 81430 250 ACC FL-FL GATE VALVE - RS POA 81431 300 ACC FL-FL GATE VALVE - RS POA 81432 50 CC FL-FL GATE VALVE - RS POA 81433 80 CC FL-FL GATE VALVE - RS POA 81434 100 CC FL-FL GATE VALVE - RS POA 81453 150 CC FL-FL GATE VALVE - RS POA 81435 200 CC FL-FL GATE VALVE - RS POA 81436 225 CC FL-FL GATE VALVE - RS POA 81437 250 CC FL-FL GATE VALVE - RS POA 81438 300 CC FL-FL GATE VALVE - RS POA PN25 RESILIENT SEATED GATE VALVE COMPLIANT WITH AS2638.2 C/W STEM CAP OPERATOR FLANGES DRILLED IN ACCORDANCE WITH AS40878 FIG B6 - PN35 / AS2129 TABLE "F" GATE VALVE: METAL SEATED FL - FL PN35 PRODUCT NOMINAL CODE SIZE CLOSING JOINT TYPE PRICE 81351 80 ACC FL-FL GATE VALVE - MS POA 81352 100 ACC FL-FL GATE VALVE - MS POA 81353 150 ACC FL-FL GATE VALVE - MS POA 81354 200 ACC FL-FL GATE VALVE - MS POA 81355 225 ACC FL-FL GATE VALVE - MS POA 81356 250 ACC FL-FL GATE VALVE - MS POA 81357 300 ACC FL-FL GATE VALVE - MS POA 81358 375 ACC FL-FL GATE VALVE - MS POA 81359 80 CC FL-FL GATE VALVE - MS POA 81360 100 CC FL-FL GATE VALVE - MS POA 81361 150 CC FL-FL GATE VALVE - MS POA 81362 200 CC FL-FL GATE VALVE - MS POA 81363 225 CC FL-FL GATE VALVE - MS POA 81364 250 CC FL-FL GATE VALVE - MS POA 81365 300 CC FL-FL GATE VALVE - MS POA 81366 375 CC FL-FL GATE VALVE - MS POA PN35 METAL SEATED GATE VALVE COMPLIANT WITH AS2638.1 C/W STEM CAP OPERATOR FLANGES DRILLED IN ACCORDANCE WITH AS40878 FIG B6 - PN35 / AS2129 TABLE "F" 21 VALVES Ductile Iron Valves GATE VALVE: RESILIENT SEATED SOCKET - SOCKET PRODUCT NOMINAL CODE SIZE CLOSING JOINT TYPE PRICE 81509 100 ACC SOC-SOC GATE VALVE - RS POA 81548 150 ACC SOC-SOC GATE VALVE - RS POA 81553 200 ACC SOC-SOC GATE VALVE - RS POA 81556 225 ACC SOC-SOC GATE VALVE - RS POA 81557 250 ACC SOC-SOC GATE VALVE - RS POA 81558 300 ACC SOC-SOC GATE VALVE - RS POA 81565 375 ACC SOC-SOC GATE VALVE - RS POA 81511 100 CC SOC-SOC GATE VALVE - RS POA 81512 150 CC SOC-SOC GATE VALVE - RS POA 81555 200 CC SOC-SOC GATE VALVE - RS POA 81562 225 CC SOC-SOC GATE VALVE - RS POA 81563 250 CC SOC-SOC GATE VALVE - RS POA 81564 300 CC SOC-SOC GATE VALVE - RS POA 78875 375 CC SOC-SOC GATE VALVE - RS POA AS1477 Type 1 (White) pipes requires S1 adaptor ring GATE VALVE: RESILIENT SEATED SPIGOT - SPIGOT PRODUCT NOMINAL SIZE CODE BODY CLOSING TYPE PRICE 81504 100 ACC SP-SP GATE VALVE - RS POA 81544 150 ACC SP-SP GATE VALVE - RS POA 81552 200 ACC SP-SP GATE VALVE - RS POA 81626 225 ACC SP-SP GATE VALVE - RS POA 81506 100 CC SP-SP GATE VALVE - RS POA 81547 150 CC SP-SP GATE VALVE - RS POA GATE VALVE: - SERVICE CONNECTION - PE-PE PRODUCT NOMINAL PE PIPE CODE SIZE DN CLOSING JOINT TYPE PRICE 81687 20 25 ACC PE-PE GATE VALVE - RS POA 81688 25 32 ACC PE-PE GATE VALVE - RS POA 81689 32 40 ACC PE-PE GATE VALVE - RS POA 81690 40 50 ACC PE-PE GATE VALVE - RS POA 81691 50 63 ACC PE-PE GATE VALVE - RS POA WATER SERVICE CONNECTION VALVE WITH TENSILE RESISTANT SOCKET JOINTS FOR PE PIPES VALVES 3 VALVES Ductile Iron Valves GATE VALVE: SOCKET - FLANGE RS PRODUCT NOMINAL SIZE CODE BODY CLOSING JOINT TYPE PRICE 81451 80 ACC SOC-FL GATE VALVE - RS POA 81576 100 ACC SOC-FL GATE VALVE - RS POA 81577 150 ACC SOC-FL GATE VALVE - RS POA GATE VALVE: RESILIENT SEATED FL-FL C/W MOUNT FLANGE PRODUCT NOMINAL SIZE CODE BODY CLOSING JOINT TYPE PRICE 61825 100 CC FI-FI GATE VALVE - RS POA 61884 150 CC FI-FI GATE VALVE - RS POA 61933 200 CC FI-FI GATE VALVE - RS POA 225 CC FI-FI GATE VALVE - RS POA 250 CC FI-FI GATE VALVE - RS POA 300 CC FI-FI GATE VALVE - RS POA 375 CC FI-FI GATE VALVE - RS POA 61946 450 CC FI-FI GATE VALVE - RS POA 500 CC FI-FI GATE VALVE - RS POA 600 CC FI-FI GATE VALVE - RS POA F10 STD ISO MOUNTING FLANGE, EXCLUDES ACTUATOR.
Load more

Recommended publications
  • Forged Steel Valves
    Edward Forged Steel Valves Experience In Motion Table of Contents Figure Number Index 5 Univalve® Stop-Check Valves Class 4500 55 Edward Valves Availability Chart 6 Univalve® Piston Check Valves Class 4500 56 Edward Description of Figure Number System 8 Hydraulic Stop Valves 57 Hydraulic Check Valves 58 Introduction Features and Descriptions of Edward PressurCombo Valves 59 PressurCombo Class 1690 60 High Performance for Critical Service 10 PressurCombo Class 2680 61 A History of Firsts 13 PressurCombo Class 4500 62 Miscellaneous Technical Data 14 Strainers Class 800 and Series 1500 63 Special Application Valves 15 Features and Descriptions of Features and Description of Edward Hermavalve® Hermetically-Sealed Valves 64 Edward Univalve® Globe Valves 16 Part Specification List For Edward Hermavalve® 66 Part Specification List for Edward Univalve® 17 Hermavalve® Hermetically-Sealed Valves 67 Edward Forged Steel Valves Feature Body-Guided Disks 18 Here’s How the Unique Stem-Disk Assembly is Made... 19 Features and Description of Accessories/Actuators Edward Bolted Bonnet Globe Valves 20 Accessories – Forged Steel 68 Part Specification List for Actuators – Forged Steel 69 Edward Bolted Bonnet Globe Valves 21 Required Information for Motor Actuators 70 Forged Steel Valves Reference Blow-Off Valves Class 300 22 Material Chemical Analysis (ASTM) for Edward Valves 72 Blow-Off Valves Class 400 & 600 24 ASME B16.34 – 2009 Pressure/Temperature Ratings 73 Blow-Off Valves Class 1500 & 2500 26 Continuous Blowdown Valves Class 1925 27 Technical Information
    [Show full text]
  • Mueller Water Products, Inc. 2006 Annual Report
    Mueller Water Products, Inc. 2006 Annual Report 1200 Abernathy Road, N.E. Suite 1200 STRONG PAST. STRONGER FUTURE. Atlanta, GA 30328 (770) 206-4200 2006 Annual Report LEADING BRANDS www.muellerwaterproducts.com INTERN AT I O N A L The 2006 Mueller Water Products, Inc. Annual Report saved the following trees water energy solid waste greenhouse gases resources by printing on 100% recycled fiber, 50% post-consumer waste, 30 6,557 14 1,434 2,424 and processed chlorine-free paper. fully grown gallons million BTUs pounds pounds Mueller Water Products, Inc. BOARD OF DIRECTORS OFFICERS SHAREHOLDER INFORMATION GREGORY E. HYLAND GREGORY E. HYLAND ANNUAL MEETING Chairman, President and Chief Executive Chairman, President and The annual meeting of stockholders Officer, Muellerater W Products, Inc. Chief Executive Officer of Mueller Water Products will be held March 22, 2007 at: DONALD N. BOYCE DALE B. SMITH Four Seasons Hotel Atlanta Retired Chairman and CEO, Chief Operating Officer, 75 14th Street IDEX Corporation Mueller Water Products, Inc. Atlanta, GA 30309 BUSINESS DESCRIPTION Chief Executive Officer, HOWARD L. CLARK, JR. Mueller Group CORPORATE OffICES Vice Chairman, Lehman Brothers, Inc. Mueller Water Products is a leading North American manufacturer and marketer of infrastructure Mueller Water Products, Inc. RAY TOROK JERRY W. KOLB 1200 Abernathy Road, N.E. and flow control products for use in water distribution networks and treatment facilities. Its broad President, U.S. Pipe Retired Vice Chairman, Suite 1200 product portfolio includes engineered valves, hydrants, ductile iron pipe and pipe fittings, which Deloitte & Touche LLP ThOMAS E. FISH Atlanta, GA 30328 are utilized by municipalities, as well as the commercial and residential construction, oil and gas, President, Anvil International (770) 206-4200 JOSEPH B.
    [Show full text]
  • Valves in Irrigation Systems1 Dorota Z
    CIR824 Valves in Irrigation Systems1 Dorota Z. Haman and Fedro S. Zazueta2 The term “valve” applies to a variety of devices for control- ling the flow of liquid. Various valves allow for on-off control, modulation of the flow rate through the system, and prevention of back flow. They can also be used for pressure relief or as a safety device. In general, valves can vary from simple manual on-off devices to sophisticated control equipment which act as metering instruments and deliver predetermined amounts of water to the system. On-Off Service Valves For normal on-off control the best choices are gate, ball, and plug valves. The on-off service valves function by slid- ing or by turning a flat, cylindrical or spherical flow control element over an orifice in the valve body. Leakage past the flow control element is prevented by sealing or seating surfaces at the orifice. In the fully open position a passage through a gate, ball or plug valve is unrestricted resulting in a low pressure loss through the valve. Gate Valves Figure 1. Rising stem, solic wedge gate valve. A gate valve is the most common type of on-off service Other types of wedges can be used, such as split wedge, valve (Figure 1). Its flow control element is a disk or wedge double disk parallel wedge, or a combination of disks joined attached to the valve stem. There are various designs of by a ball and socket which are self-aligning to each of the these wedges with a solid wedge being the most common.
    [Show full text]
  • Control Valve Handbook
    CONTROL VALVE HANDBOOK Fifth Edition Emerson Automation Solutions Flow Controls Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Cernay, 68700 France Dubai, United Arab Emirates Singapore 128461 Singapore Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Fisher is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. © 2005, 2019 Fisher Controls International LLC. All rights reserved. D101881X012/ Sept19 Preface Control valves are an increasingly vital component of modern manufacturing around the world. Properly selected and maintained control valves increase efficiency, safety, profitability, and ecology. The Control Valve Handbook has been a primary reference since its first printing in 1965. This fifth edition presents vital information on control valve performance and the latest technologies. Chapter 1 offers an introduction to control valves, including definitions for common control valve and instrumentation terminology.
    [Show full text]
  • Ball Butterfly Check Gate Globe Plug Valves Differences Applications Suitability
    ADELAIDE • BRISBANE • PERTH VALVE TYPES There are a large variety of valves and valve configurations to suit all services and conditions; different uses (on/off, control), different fluids (liquid, gas etc; combustible, toxic, corrosive etc) different materials and different pressure and temperature conditions. Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly,Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc. The following types of valves are used in a variety of applications, these descriptions may provide a basic guideline in the selection of valves. BALL VALVES BUTTERFLY VALVES Because of their excellent operating The butterfly valve derives its name from the characteristics, ball valves are used for the wing-like action of the disc which operates at broadest spectrum of isolation applications and right angles to the flow. It’s main advantage is a are available in a wide range of sizes and seating surface which is not critical. It is materials and are available in full flow and full designed for flow isolation. The disc impinges through conduit. Advantages - quick acting, against a resilient liner to provide bubble straight through flow in either direction, low tightness with low operating torque. Compact pressure drop, bubble tight shut off & operating and with a simple construction, butterfly valves torque, easily actuated. Disadvantages - facilitate easy pipe arrangement. Due to disc, temperature limitations on seating material, long they have slightly reduced flow characteristics. “relative” face to face dimension.
    [Show full text]
  • Valves Brass Valves Brass Valves
    (714) 241-7050 Irvine Pipe & Supply, Inc. BRASS VALVES BRASS VALVES BRASS VALVES BRASS BALL VALVE THREADED – FULL PORT BRASS BALL VALVE 1/4” - 2” - 600# CWP SWEAT – FULL PORT BRONZE BALL VALVE 2-1/2”- 4” - 400# CWP THREADED – FULL PORT 1/2” - 2” - 600# CWP THREE PIECE - DOMESTIC 1/4” #TFP2* 2-1/2”- 4” - 400# CWP 3/8” #TFP3* 1/2” #SFP5 600# CWP – 150# STEAM 1/2” #TFP5* 3/4” #TFP7* 3/4” #SFP7 1” #SFP10 1/4” #T5952 1” #TFP10* 1-1/4” #TFP12* 1-1/4” #SFP12 1/2” #T5955 1-1/2” #SFP15 3/4” #T5957 1-1/2” #TFP15* 2” #TFP20* 2” #SFP20 1” #T59510 2-1/2” #SFP25 1-1/4” #T59512 2-1/2” #TFP25 3” #TFP30 3” #SFP30 1-1/2” #T59515 4” #SFP40 2” #T59520 4” #TFP40 2-1/2” #T59025* 3” #T59030* *APPROVED FOR NATURAL GAS *STANDARD PORT BRONZE BALL VALVE THREADED – FULL PORT DOMESTIC BRONZE BALL VALVE 600# CWP SWEAT – FULL PORT DOMESTIC BRONZE BALL VALVE NON- SWEAT – FULL PORT POTABLE POTABLE 600# CWP THREE PIECE - DOMESTIC WATER WATER (150# STEAM RATED) NON- 600# CWP – 150# STEAM POTABLE POTABLE 1/4” #T77C2 #T5852 WATER WATER 1/2” #S5955 3/8” #T77C3 #T5853 (150# STEAM RATED) 3/4” #S5957 1/2” #T77C5 #T5855 1/4” — #S5852 1” #S59510 3/4” #T77C7 #T5857 3/8” — #S5853 1-1/4” #S59512 1” #T77C10 #T58510 1-1/2” #S59515 1/2” #S77C5 #S5855 1-1/4” #T77C12 #T58512 3/4” #S77C7 #S5857 2” #S59520 1-1/2” #T77C15 #T58515 2-1/2” #S59025* 1” #S77C10 #S58510 2” #T77C20 #T58520 3” #S59030* 1-1/4” #S77C12 — 2-1/2” #T7025 (STAND.
    [Show full text]
  • MWEA Maintenance Committee Valves, Gates and Actuators
    MWEA Maintenance Committee Valves, Gates and Actuators 8:20 - 8:25 AM MWEA News and Introductions 8:30 - 9:15 Valves 101-Types, Attributes and Selection, Tim Sullivan 9:15 - 10:00 Valves 201 – Valves, Components and Maintenance, Chuck Bugeja 10:00 - 10:15 Break 10:15 - 11:00 Specialty Valves, John Hunter 11:00 - 11:45 Specialty Valves Maintenance, Paul Marchi 11:45 - 12:30 PM Lunch 12:30 - 1:00 Gates 101-Slide Gate Types, Materials and Components, Chuck Kronk 1:00 - 1:15 Sluice and Slide Gate Maintenance, Chuck Kronk 1:15 - 1:45 Actuator Types, Attributes and Selection, Chuck Bugeja 1:45 - 2:00 Break 2:00 - 3:00 Actuator Maintenance, Chuck Bugeja MWEA Maintenance Committee Valves 101 Tim Sullivan, P.E. Valves 101 Outline • Valve Use • Service Conditions • General Characteristics • Valve Specifics • Vendor / MFR neutral Valve Types Covered (in order of valves sold) • Gate valves • Plug valves • Check valves • Butterfly valves • Ball valves • Knife gate valves • Globe valves Valve Use and Service: • Isolation vs. Throttling / Control • Water vs. Wastewater vs. Air • Valve Characteristics & Materials – Dictate their use Valve Use (in order) • Isolation • Direction check • Throttling/control • Air/vacuum relief Isolation Valves • Gate • Plug (sludge) • Knife gate • Butterfly (cleaner water, air) • Ball (cleaner water and air) Throttling / Control Valves • Globe valve • Diaphragm (specialty valve) • Needle valve (packing / seal water) • Plug (sludge) • Pinch valve (sludge) • Butterfly (air) • Ball valves, V-Port ball valve (chemicals) Wastewater
    [Show full text]
  • Valve Solutions Guide
    BULLETIN 10.00-1 APRIL 2021 VALVE SOLUTIONS GUIDE www.dezurik.com Plug Valves DeZURIK Eccentric Plug Valves (PEC) Eccentric PEC Plug valves comply with AWWA C517 and are capable of handling clean and dirty liquids and gases, sludge and slurries. Eccentric action, low friction bearings and excellent pressure recovery factor make the Eccentric Plug Valve ideal for throttling applications. Resilient plug facings assure lasting bubble-tight shutoff. Heavy-duty stainless steel bearings, welded-in corrosion resistant nickel seat, adjustable packing and a variety of end styles are available. Size Range: ½-72" (15-1800mm) Temperature Range: to 450°F (232°C) Pressure Rating: 125-450 psi (860-3100 kPa) CWP Resilient plug face, bubble-tight shutoff rating to Shutoff Class: 175 psi (1200 kPa), Bi-Directional. Options to 450 psi (3100 kPa) Cast iron, aluminum, carbon steel, 316 Body Materials: stainless steel, Alloy 20, Monel, ductile iron, acid resistant bronze End Connections: Flanged, mechanical joint, grooved, threaded Lever, handwheel, chainwheel, square nut, cylinder, Actuator Type: electric motor DeZURIK 3-Way and 4-Way Plug Valves (PTW/PFW) 3-Way and 4-Way Plug Valves are designed for throttling and diverting of clean, dirty, viscous and corrosive liquids; sludge; abrasive and fibrous slurries; clean and dirty corrosive gases. Single and double plug styles can be arranged in a variety of flow combinations. Features include heavy-duty stainless steel bearings, long-life stem seal, resilient plug facings for dead-tight shutoff and metal plugs for high temperature applications. Size Range: 2-16" (50-400mm) Temperature Range: to 400°F (200°C) Pressure Rating: 125 psi (860 kPa) CWP Body Materials: Cast iron, aluminum, carbon steel, 316 stainless steel End Connections: Flanged Actuator Type: Lever, handwheel, chainwheel, cylinder, electric motor DeZURIK Pump Check Valves Pump Check Valves are specially designed to protect pumps from water hammer, reverse flow and backspin.
    [Show full text]
  • Australian Pipeline Valve Iron Diaphragm Gate Globe Check
    DIAPHRAGM, GATE, GLOBE & CHECK VALVES SHORT VERSION Click here complete version of this catalogue www.australianpipelinevalve.com.au QUALITY VALVE MANUFACTURER QUALITY COMMITMENT Quality is Our First Priority. Consistent product quality and a proven track record makes Australian Pipeline Valve a dependable choice where total reliability is the number one concern. Since its founding, APV’s philosophy has been focused on quality. Our valves are manufactured in full compliance to worldwide standards (such as ASME/ANSI, API, EN, ISO, BS, AS). 70-78 Stanbel Road Salisbury Plain South Australia 5109 Telephone +61 (0)8 8285 0033 Fax +61 (0)8 8285 0044 email: [email protected] www.australianpipelinevalve.com.au CONTENTS Swing Check Cast Iron - Class 125/250 PN10/16/25 Table D/E/F 4~6 * Swing Check Valve with Lever & Counter-weight 7 Swing Check Valve with Fuseable Link - ESDV 8* Combination Sight Glass/Check Valve 9* Uniflo Check Valve (Non-Return) Type APN 10* Uniflo Check Valve (Non-Return) Type APNX 11 Uniflo Tilt Type Check Valve - 500 Series 2~13 * Uniflo Tilt Type Check Valve Rubber Coasted Disc - SC Series 14* Uniflo Tilt Type Check Valve Metal Seated - SC-VAL Series 15* Uniflo Ball Check Valve - BC Series 17* Supercheck Wafer Check Valve - ASG Series 18* Gate Cast Iron - Class 125/250, PN16, PN25 Table D/E/F 19~22* Globe Cast Iron - Class 125/250, PN16, PN25 Table D/E/F 23~24 * Right Angle Globe Valve Cast Iron 25 Swing Check, Globe and Wedge Gate Valve Stainless Steel 26~28 * Diaphragm Valve Weir APA & Straight Through
    [Show full text]
  • Ansi Gate, Globe and Check Valves & Strainers
    Cerdanyola del Vallès (Barcelona) Comercial de Válvulas y Accesorios, S.A. Pol. Industrial Polizur, c/ Bosc Tancat, 6 Nave 2 y 3 08290 Cerdanyola del Vallès (Barcelona) SPAIN T. +34 93 586 36 00 | F. +34 93 586 36 04 | www.cva.es | [email protected] ANSI GATE, GLOBE AND CHECK VALVES GPS: Longitude 2º 8’ 6’‘ E | Latitude 41º 30’ 3’’ N & STRAINERS INDEX 2 THE COMPANY 8 CAST GATE VALVES 16 CAST GATE VALVES PRESSURE SEAL 20 CAST GLOBE VALVES 32 CAST GLOBE VALVES PRESSURE SEAL 36 CAST CHECK VALVES 44 CAST CHECK VALVES PRESSURE SEAL 50 FORGED GATE VALVES 54 FORGED GLOBE VALVES 58 FORGED GLOBE BELLOWS SEALED VALVES 62 FORGED CHECK VALVES 66 STRAINERS & SCREENS 78 TECHNICAL FEATURES GATE, GLOBE AND CHECK VALVES & STRAINERS 1 THE POWER OF EXPERIENCE CVA has built up more than thirty years of professional and business specialisation in the industrial valve sector. It is an organisation fully oriented towards customer satisfaction, and the experience acquired in supplying more than 3,000 users with very different needs and levels of requirements makes CVA a highly efficient and competitive specialised partner. GATE, GLOBE AND CHECK VALVES & STRAINERS 2 COMERCIAL DE VÁLVULAS Y ACCESORIOS THE STRENGHT OF THE ENGINEERING The CVA’s engineering department investigates and tests the valves at limit conditions to optimise their performance and to ensure that they are reliable and last as long as possible under operational conditions, qualities certified by the principal institutions and approved by companies providing a good representation of the industrial sector. THE DYNAMIC OF THE SERVICE CVA’s technical/sales team, with a high level of technical qualifications, co-operates closely with customers, from advice and provision of specific solutions to the design of whole projects.
    [Show full text]
  • Edward Valves: Quick-Closing Isolation Valves
    Flowserve - Edward Valves Quick Closing Isolation Valves -The Equiwedge Alternative Quick Closing Isolation Valves -The Equiwedge Alternative Problem Uni‐directional Valves Fast isolation of a large bore main steam or Initial quick‐closing valves for main steam feedwater line during a pipe rupture that seals line isolation were required to close with flow flow in both directions. in only one direction (from the reactor toward the turbine). Initial designs relied on simple Solution balanced globe valves using “air‐spring” The Flowserve-Edward Equiwedge gate valve actuators. with the gas-hydraulic Type A actuator. Gate Valve Advantages Nuclear power plants have become The foremost advantage of the gate valve important contributors to the power over the globe valve is that the gate valve requirements of the United States and other offers less pressure drop at normal flow countries worldwide. These plants have an conditions. While Flowserve research on globe excellent record from the standpoint of safety. valve flow passage designs led to flow Nevertheless, there has been increasing optimization in balanced globe valves, similar concern for safety in the event of unlikely, but flow research led to even better flow credible, accidents. One such potential characteristics in Equiwedge valves. The low accident–the rupture of a main steam or pressure drop feature of the gate valve may be feedwater line–has led to demand for large, exploited by users to reduce pumping power quick closing isolation valves. As a result of and increase cycle efficiency or, if desired, it continuous development related to these may be applied to reduce capital investment by difficult applications, the Flowserve Edward using a smaller nominal valve size (a venturi Equiwedge gate valves are available.
    [Show full text]
  • UBW Industrial Valve Catalog
    Engineered by Professionals for Professionals since 1910 INDUSTRIAL VALVES UNITED BRASS WORKS, INC. 714 S. Main St. Randleman, N.C. 27317 Phone: 800/334-3035 Fax: 800/498-4696 Email: [email protected] Web: www.ubw.com N. Las Vegas Office 221 Commerce Park Dr. N. Las Vegas, NV 89032 Phone: 800/423-7353 Fax: 702/628-9904 Catalog 1603 Printed in U.S.A. CONTENTS Terms and Conditions - Page 123 Angle Valves ................................................... 10-13 Gauge Fixtures, Boiler Code Compliant……..65-66 Ball Valves .......................................................... 1-3 Gauge Fixtures, Lower ................................... 71-74 Blow-Down Valves .......................................... 14-19 Gauge Fixtures, Upper ................................... 67-70 Boiler Drains ...................................................... 119 Gauge Fixture Sets ........................................ 75-90 Boiler Gauge Glass ............................................. 56 Gauge Fixture Set, Boiler Code Compliant…...…91 Check Valves, In-Line .......................................... 29 Globe Valves ...................................................... 4-9 Check Valves, Lift .......................................... 30-37 Needle Valves ................................................ 46-47 Check Valves, Swing ...................................... 22-28 Pressure Gauges ........................................... 95-97 Cocks ............................................................ 98-100 Pressure Reducing Valves ........................
    [Show full text]