DOCSLIB.ORG

Innovation on the Line: GM Manufacturing Milestones

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Innovation on the Line: GM Manufacturing Milestones Innovation on the Line: GM Manufacturing Milestones Many of General Motors’ most important innovations have occurred behind the scenes, in its manufacturing facilities. Concepts such as changeover, flexible assembly, automation, computer simulation, machine vision and robotics were developed at GM. Over the decades these innovations have helped enable improvements in vehicle quality, efficiency and competitiveness. 1901: Ransom Olds’ famous Curved Dash Oldsmobile, designed with simplicity, reliability and value in mind, was the first American car built in a factory designed specifically for automobiles and in standardized volume production. GM acquired Oldsmobile in 1908. 1908: Cadillac wins the Dewar Trophy, Europe’s most prestigious award for precision and excellence in manufacturing, by demonstrating the auto industry’s highest standards for precision and interchangeability of parts by disassembling three Cadillacs and mixing the parts randomly before reassembling and driving them before a contingent of judges. 1922: GM hires William Knudsen to lead Chevrolet’s turnaround. Knudsen implements flexible mass production, which helps Chevrolet incorporate annual styling changes and take market share from Ford. 1923: To provide Chevrolets to customers in Scandinavia, GM opens its first assembly plant outside North America, in Copenhagen, Denmark. 1924: Duco, a new, durable and quick-drying paint developed by GM and DuPont, is introduced, giving customers a wider array of color choices and cost savings for GM. By 1926, Chevrolet used it on all of its cars, a competitive advantage over Ford. 1926: Buick’s “unified assembly line” opens in Flint, Mich. It was hailed as the largest and most efficient car assembly system in the world and brought all final vehicle assembly into one factory. 1928: GM opens the Sao Caetano do Sul plant in Brazil, as well as India’s first automobile assembly plant. Chevrolet switches from a four- to a six-cylinder engine in just three weeks thanks to sequence lines, the forerunner to conveyors. 1936: GM Fisher Body introduces the Unisteel Turret Top Body, formed by welding the steel inner and outer panels into a permanent, shock-resistant structure designed for greater comfort and durability. Page 1 of 3 1953: Buick opens a new V-8 engine plant in Flint, Mich., featuring the “world’s most modern engine assembly line.” Two, 600-foot-long lines turn out 1,200 engines a day. 1961: The world’s first industrial robot is used at GM’s Ternstedt components plant in Trenton, N.J. The Unimate’s 4,000-pound arm positions extremely hot diecast metal parts into cooling pools. 1969: The world’s first programmable logic controller (PLC) application occurs at the Hydra-Matic Transmission plant in Ypsilanti, Mich. This digital controller was used to automotive machinery on assembly lines, replacing the labor-intensive use of relays. 1966: Lordstown (Ohio) Assembly opens, and is touted as the most automated automotive plant in the world. 1971: GM engineers develop a pneumatic tool control system at the Fairfax (Kansas) Assembly plant. The computer-based device guarantees the correct torque value is applied to 30 critical fastened joints on Buick, Oldsmobile and Pontiac sedans. 1976: The world’s first automotive laser welding application occurs at GM’s Moraine (Ohio) plant. It uses two, 1.25-kW CO2 lasers to join valve assemblies for emission control systems. 1977: SIGHT-I, the first industrial computer vision system on a U.S. automotive production line, is installed at the Delco Electronics Division plant in Kokomo, Ind. 1978: The world’s first programmable universal machine for assembly (PUMA) robot is used at GM’s Rochester Products division. 1980: GM unveils a standardized computer language called Manufacturing Automation Protocol (MAP) to communicate with PLCs, robots, conveyors and other plant-floor equipment. Within two years GM Truck and Bus in Pontiac, Mich. truck begins installing MAP. The result is better control over the manufacturing process because proprietary data systems are eliminated. 1982: GM launches a major campaign to increase productivity through automation. GM forms a joint venture with FANUC Ltd. to create GMFanuc Robotics Corp. 1983: GM’s Orion Township, Mich., assembly plant opens. It features 22 unmanned forklift trucks that follow wires buried in the floor and bring parts to the assembly line. GM embarks on the innovative Buick City experiment in nearby Flint. The $300-million project transforms one of the oldest automotive assembly plants in the world into a state-of-the-art, lean manufacturing facility that opened in 1985. Page 2 of 3 1985: The Detroit-Hamtramck plant opens and begins assembling Buick, Cadillac and Oldsmobile sedans. It features 2,000 programmable devices, including 260 robots. 1995: Annual vehicle sales outside North America exceed 3 million units for the first time. GM establishes a joint venture in China with Shanghai Automotive Industry Corp. The Synchronous Math-Based Process is launched to digitally design vehicles, components and production processes. 1996: GM’s Global Manufacturing System (GMS) debuts. Flexible layouts and production processes are designed around providing support for operators and teams on the plant floor so that all manufacturing facilities globally can build high- quality vehicles at a competitive cost. Expanded to non-manufacturing operations in 2003. 1999: GM’s parts-making operations become Delphi Corp. 2002: The flexible Lansing Grand River factory opens. It is GM’s first plant built in the 21st century and is located on the site of the original, 100-year-old Oldsmobile complex. A new assembly technology called C-Flex is unveiled. The programmable body shop tooling system replaces body style-specific tooling. It allows multiple body panels to be robotically welded with the same set of programmable tools and robots. 2005: GM operates three of the top five vehicle assembly plants in the annual Harbour Report. The Oshawa, Ontario, plant is ranked the most productive plant in North America. 2006: GM’s newest assembly plant, Lansing Delta Township, opens. It is GM’s fastest-built assembly complex. It also is the first manufacturing facility to achieve Leadership in Energy and Environmental Design (LEED) Gold certification. # # # Page 3 of 3 .
Load more

Recommended publications
  • GARRETT MOTION INC. (Exact Name of Registrant As Specified in Its Charter)
    UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 Form 8-K CURRENT REPORT Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 Date of Report (Date of earliest event reported): September 6, 2018 GARRETT MOTION INC. (Exact name of Registrant as specified in its Charter) Delaware 1-38636 82-487189 (State or other jurisdiction (Commission (I.R.S. Employer of incorporation) File Number) Identification Number) La Pièce 16, Rolle, Switzerland 1180 (Address of principal executive offices) (Zip code) Registrant’s telephone number, including area code: +41 21 695 30 00 Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions: ☐ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) ☐ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) ☐ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) ☐ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) Indicate by check mark whether the Registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (17 CFR §230.405) or Rule 12b-2 of the Securities Exchange Act of 1934 (17 CFR §240.12b-2). Emerging growth company ☐ If an emerging growth company, indicate by check mark if the Registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
    [Show full text]
  • Owner's Manual,2000 Oldsmobile Alero
    Bumper-to-Bumper 3-years/36,000 miles (60 000 km) Limited Warranty Every 2000 Alero under warranty is backed with the following 1-800-442-OLDS services: (( ForFor vehiclesvehicles purchasedpurchased inin Canada,Canada, call 1-800-268-6800) that provides in an emergency: Courtesy Free lockout assistance Transportation Free dead-battery assistance Free out-of-fuel assistance Free flat-tire change Emergency towing 2000 Oldsmobile Alero Owner's Manual Litho in U.S.A. © Copyright General Motors Corporation 1999 Part Number 22618959 A First Edition All Rights Reserved i Table of Contents Seats and Restraint Systems Section 1 Seats and Seat Controls Air Bag Systems Safety Belts Child Restraints Features and Controls Section 2 Keys and Door Locks Windshield Wipers Remote Lock Control Cruise Control Trunk Release Interior and Exterior Lamps Automatic Transmission (If Equipped) Mirrors Manual Transmission Storage Compartments Parking Brake Convenience Net (If Equipped) Windows Accessory Power Outlets Tilt Wheel Sunroof (If Equipped) Turn Signal/Multifunction Lever Instrument Panel, Warning Lights and Gages ii Table of Contents (cont'd) Comfort Controls and Audio Systems Section 3 Heating and Air Conditioning Radio/Cassette Player/CD Player Setting the Radio Clock Radio Theft-Deterrent Feature Your Driving and the Road Section 4 Defensive Driving Steering Drunken Driving Driving Tips for Various Road Conditions Control of a Vehicle Recreational Vehicle Towing Braking Loading Your Vehicle Enhanced Traction System Towing a Trailer Problems on the
    [Show full text]
  • Teaching Lean Manufacturing Principles in a Capstone Course with a Simulation Workshop
    Session 2163 Teaching Lean Manufacturing Principles in a Capstone Course with a Simulation Workshop Kenneth W. Stier Department of Technology Illinois State University Mr. John C. Fesler, Mr. Todd Johnson Illinois Manufacturing Extension Center Bradley University/Illinois State University Introduction Traditionally, improvements in manufacturing costs have been achieved by capital investments in new equipment intended to the lower manufactured costs per unit. Often, the new equipment was designed to achieve the lower costs through faster production speeds, more automation, etc. Typical focus was on pieces per minute and often gave inadequate consideration to size of production runs, changeover times and inventory carrying costs. Many times, the new automated, higher speed equipment required lengthy changeovers before a different product could be run, resulting in management believing the most cost-effective practice was long production runs (large batch sizes). In today's manufacturing climate, firms are re-thinking many of the traditional ways of achieving improvements, and exploring new methods. One in particular, lean manufacturing is a practice that is receiving quite a bit of attention today1,2,3,4. Manufacturers have embraced lean manufacturing during the slow down in the economy as one method of remaining profitable5. Having students experience lean manufacturing concepts in the laboratory can have a positive effect on the experiences offered to the students prior to them entering the industrial setting. It is important that faculty provide students with the experiences that develop a strong conceptual framework of how this management practice will benefit the industry in which they work. Many of our students learn best when they are actively engaged in activities that emphasize the concepts that we are trying to teach.
    [Show full text]
  • Warranty Guide,2002 Oldsmobile Warranty and Owner Assistance Information
    or Put in Use: First Delivered Odometer Reading on Date Vehicle Month First Delivered or Put In Use: Date Vehicle Day Identification Number (VIN): Vehicle City & State Street Address Year Owner’s Name IMPORTANT This booklet contains important information about the vehicle’s warranty coverage. It also explains Owner Assistance Information and GM’s Participation in an Alternative Dispute Resolution Program. Keep this booklet with your vehicle and make it available to a Oldsmobile dealer if warranty work is needed. Be sure to keep it with your . X vehicle when you sell it so future owners will have the information. 1 yellowblue Have you purchased the Genuine GM Protection Plan? The GM Protection Plan may be purchased within specific time/mileage limitations. See the information request form on page 31 of this booklet. Remember, if the service contract you are considering to purchase does not have the GM Protection Plan emblem shown above on it, then it is not the Genuine GM Protection Plan from General Motors. E 08/31/01 Oldsmobile Division, General Motors Corporation. All rights reserved. GENERAL MOTORS, GM, OLDSMOBILE, and the OLDSMOBILE emblem are registered trademarks of General Motors Corporation. Part No. 22673546 B 2 2002 Oldsmobile Warranty and Owner Assistance Information An Important Message to Oldsmobile Owners . 4 Warranty Coverage at a Glance . 6 New Vehicle Limited Warranty What Is Covered . 7 What Is Not Covered . 9 Things You Should Know About the New Vehicle Limited Warranty . 12 Emission Control Systems Warranties 1. Federal Emission Control Warranty. 16 2. California Emission Control Warranty. 17 3.
    [Show full text]
  • General Motors Corporation Securities Litigation 06-MD-01749-Third
    Case 2:06-md-01749-GER Document 13 Filed 08/15/2006 Page 1 of 191 UNITED STATES DISTRICT COURT EASTERN DISTRICT OF MICHIGAN SOUTHERN DIVISION MDL No. 1749 IN RE GENERAL MOTORS CORP. Master Case No. 06-md-1749 SECURITIES LITIGATION Hon. Gerald E. Rosen This Document Relates to: 2:06-cv-12258-GER _______________________________________/ 2:06-cv-12259-GER JURY TRIAL DEMANDED THIRD AMENDED COMPLAINT FOR VIOLATION OF THE FEDERAL SECURITIES LAWS LABATON SUCHAROW & RUDOFF LLP 100 Park Avenue New York, NY 10017 Tel: 212 907-0700 Fax: 212 818-0477 MURRAY, FRANK & SAILER LLP 275 Madison Avenue New York, NY 10016 Tel: 212 682-1818 Fax: 212 682-1892 Case 2:06-md-01749-GER Document 13 Filed 08/15/2006 Page 2 of 191 TABLE OF CONTENTS I. SUMMARY OF CLAIMS ..................................................................................................................1 A. PLAINTIFFS’ CLAIMS UNDER THE SECURITIES ACT ............................................2 B. PLAINTIFFS’ CLAIMS UNDER THE EXCHANGE ACT............................................5 II. JURISDICTION AND VENUE......................................................................................................5 III. PARTIES...............................................................................................................................................6 A. LEAD PLAINTIFF ...................................................................................................................6 B. ADDITIONAL NAMED PLAINTIFFS ..............................................................................7
    [Show full text]
  • Teacher Resource Lesson Plan
    TEACHER RESOURCE LESSON PLAN THE AUTOMOBILE AND ITS IMPACT ON DETROIT automobile era in Detroit. • Examine primary sources, including newspaper articles and photographs. • Determine societal concerns, leisure activities, and other cultural habits. • Learn the definitions of primary and secondary sources. BACKGROUND ESSAY In 1890, the residents of Detroit were proud of their city. With its tree-lined boulevards, Detroit General Motors Assmebly Line, 1922 was described as the “Paris of the Midwest.” This Courtesy of the Walter P. Reuther Library, Wayne State University was an exaggeration, but Detroit was a thriving and INTRODUCTION attractive city of 200,000 people. Detroit, however, was typical of a turn of the This lesson was originally published in Telling century American city. Optimism was justified, but Detroit’s Story: Historic Past, Proud People, Shining the same could be said of dozens of American cities Future curriculum unit developed by the Detroit 300 in 1890. The difference is that in the next generation, Commission in 2001. Detroit went on to achieve a distinction unmatched Students in grades three through five will be by any American city. That greatness was due to introduced to Detroit’s early automotive leaders the automobile. It changed the world and Detroit through a brief dramatic reading. Then, using became the hub of that change. primary source articles from newspapers and Detroit contained an ethnically diverse photographs, students will look at Detroit as the population. European immigrants flocked to urban birthplace of the automotive age. areas and Detroit was no exception. Detroit’s population was approximately thirty percent foreign ESSENTIAL QUESTIONS born in 1890.
    [Show full text]
  • Establishing Basic Requirements for Textile and Garment Mass Production Units in the Tanzanian Context
    The University of Manchester Research Establishing basic requirements for textile and garment mass production units in the Tanzanian context DOI: 10.1108/RJTA-11-2019-0054 Document Version Accepted author manuscript Link to publication record in Manchester Research Explorer Citation for published version (APA): Taifa, I. W. R., & Lushaju, G. G. (2020). Establishing basic requirements for textile and garment mass production units in the Tanzanian context. Research Journal of Textiles and Apparel, 24(4), 321-340. https://doi.org/10.1108/RJTA-11-2019-0054 Published in: Research Journal of Textiles and Apparel Citing this paper Please note that where the full-text provided on Manchester Research Explorer is the Author Accepted Manuscript or Proof version this may differ from the final Published version. If citing, it is advised that you check and use the publisher's definitive version. General rights Copyright and moral rights for the publications made accessible in the Research Explorer are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. Takedown policy If you believe that this document breaches copyright please refer to the University of Manchester’s Takedown Procedures [http://man.ac.uk/04Y6Bo] or contact [email protected] providing relevant details, so we can investigate your claim. Download date:26. Sep. 2021 Research Journal of Textile and Apparel Research Journal of
    [Show full text]
  • REO at the MSU Archives REO Motors Inc
    REO and the Automobile Industry A Guide to the Resources in the Michigan State University Archives and Historical Collections Compiled by Ed Busch Michigan State University Archives 101 Conrad Hall East Lansing, MI (517) 355 - 2330 archives.msu.edu January 2012 Updated December 2015 The purpose of this resource guide is to familiarize visitors of the MSU Archives with some of the available resources related to the REO and other automobile company records. Note that this guide is not a comprehensive listing of all the available sources, but is intended to be a starting point from which visitors can begin their research according to their specific needs. Online versions of the finding aids for most collections listed can be accessed by clicking on the collection name. REO at the MSU Archives REO Motors Inc. was incorporated in 1904 by R. E. Olds and other investors as the R. E. Olds Company. It passed through several name changes and permutations until May 30, 1975, when Diamond REO Trucks, Inc., filed for bankruptcy. In its lifetime, the company built passenger cars and trucks, but it was best known for the latter. The company became dependent on government contracts in the 1940s and 1950s, but by 1954 continuing losses led to a takeover by a group of majority stockholders. From 1954 to 1957 the company went through a series of business crises ultimately leading to its purchase by White Motors and the formation of the Diamond REO Truck Division of White Motors in 1957. REO Motors 1. REO Motor Company Records 00036 283 Volumes, 170 cubic feet This collection consists of the business records of REO Motors, Inc.
    [Show full text]
  • The Internet Connected Production Line: Realising the Ambition of Cloud Manufacturing
    The Internet Connected Production Line: Realising the Ambition of Cloud Manufacturing Chris Turner1 and Jörn Mehnen2 1Surrey Business School, University of Surrey, Guildford, Surrey GU2 7XH, U.K. 2Dept. of Design, Manufacture & Engineering Management, University of Strathclyde, Glasgow, G1 1XJ, U.K. Keywords: Cloud Manufacturing, Industry 4.0, Industrial Internet, Cyber Physical Systems, Internet of Things, Cloud Computing, Redistributed Manufacturing. Abstract: This paper outlines a vision for Internet connected production complementary to the Cloud Manufacturing paradigm, reviewing current research and putting forward a generic outline of this form of manufacture. This paper describes the conceptual positioning and practical implementation of the latest developments in manufacturing practice such as Redistributed manufacturing, Cloud Manufacturing and the technologies promoted by Industry 4.0 and Industrial Internet agendas. Existing and future needs for customized production and the manufacturing flexibility required are examined. Future directions for manufacturing, enabled by web based connectivity are then proposed, concluding that the need for humans to remain ‘in the loop’ while automation develops is an essential ingredient of all future manufacturing scenarios. 1 INTRODUCTION variant. Major initiatives that promote Internet connected (or at least network connected) production The Internet and its supporting technologies have had lines, such as Industry 4.0 (Federal German a profound impact on society and business around the Government, 2016) and the Industrial Internet world over the past 20 years. The business models of (Posada et al. 2015), espouse the primacy of companies in service industries such as finance, retail interconnected machines and intelligent software and the media have seen fundamental change in forming cyber physical manufacturing entities.
    [Show full text]
  • Owner's Manual,2000 Oldsmobile Silhouette
    Bumper-to-Bumper 3-years/36,000 miles (60 000 km) Limited Warranty Every 2000 Silhouette under warranty is backed with the following 1-800-442-OLDS services: ((For vehicles purchased in Canada, call 1-800-268-6800) that provides in an emergency: Free lockout assistance Courtesy Transportation Free dead-battery assistance Trip Free out-of-fuel assistance Routing Free flat-tire change Emergency towing 2000 Oldsmobile Silhouette Owner's Manual Litho in U.S.A. © Copyright General Motors Corporation 1999 Part Number 10423673 A First Edition All Rights Reserved i Table of Contents Seats and Restraint Systems Section 1 Seats and Seat Controls Air Bag Systems Safety Belts Child Restraints Features and Controls Section 2 Keys and Door Locks Interior and Exterior Lamps Remote Lock Control (Option) Mirrors Automatic Transaxle Storage Compartments Parking Brake Convenience Net (Option) Windows Accessory Power Outlets Tilt Wheel OnStar® System (If Equipped) Turn Signal/Multifunction Lever Instrument Panel, Warning Lights and Gages Windshield Wipers Driver Information Center (Option) Cruise Control ii Table of Contents (cont'd) Comfort Controls and Audio Systems Section 3 Heating and Air Conditioning Radio Theft-Deterrent Feature Setting the Radio Clock Steering Wheel Controls (If Equipped) Radio/Cassette Player/CD Player Your Driving and the Road Section 4 Defensive Driving Driving Tips for Various Road Conditions Drunken Driving Recreational Vehicle Towing Control of a Vehicle Loading Your Vehicle Braking Towing a Trailer Steering Problems on the
    [Show full text]
  • Challenges and Opportunities of Digital Production Technologies for Developing Countries Department of Policy, Research and Statistics Working Paper 7/2019
    Inclusive and Sustainable Industrial Development Working Paper Series WP 7 | 2019 A REVOLUTION IN THE MAKING? CHALLENGES AND OPPORTUNITIES OF DIGITAL PRODUCTION TECHNOLOGIES FOR DEVELOPING COUNTRIES DEPARTMENT OF POLICY, RESEARCH AND STATISTICS WORKING PAPER 7/2019 A revolution in the making? Challenges and opportunities of digital production technologies for developing countries Antonio Andreoni UCL Institute for Innovation and Public Purpose Guendalina Anzolin University of Urbino UNITED NATIONS INDUSTRIAL DEVELOPMENT ORGANIZATION Vienna, 2019 This is a Background Paper for the UNIDO Industrial Development Report 2020: Industrializing in the Digital Age The designations employed, descriptions and classifications of countries, and the presentation of the material in this report do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations Industrial Development Organization (UNIDO) concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries, or its economic system or degree of development. The views expressed in this paper do not necessarily reflect the views of the Secretariat of the UNIDO. The responsibility for opinions expressed rests solely with the authors, and publication does not constitute an endorsement by UNIDO. Although great care has been taken to maintain the accuracy of information herein, neither UNIDO nor its member States assume any responsibility for consequences which may arise from the use of the material. Terms such as “developed”, “industrialized” and “developing” are intended for statistical convenience and do not necessarily express a judgment. Any indication of, or reference to, a country, institution or other legal entity does not constitute an endorsement.
    [Show full text]
  • GM 2007 Annual Report
    General Motors Corporation 2007 Annual Report next 100 YEARS of leadership. 100 YEARS of innovation. General Motors Corporation 1 100 YEARS of putting people on wheels. 2 General Motors Corporation And we’re just getting started. We’re making the best cars and trucks we ever have. And we’re selling them in more parts of the world than ever before. We’re very proud of our past, but even more excited about our future. We’re focused on what’s next: building the best General Motors yet. General Motors Corporation 3 Bob Lutz Vice Chairman, Global Product Development Fritz Henderson Rick Wagoner GM’s senior leadership in the President & Chairman & Cadillac Display at the 2008 Chief Operating Offi cer Chief Executive Offi cer North American International Auto Show in Detroit, Michigan. 4 General Motors Corporation DEAR STOCKHOLDERS: A century is a long time to be in business. For General Motors, it’s been a century of leadership and achievements, of challenges and opportunities. A centennial is a great time to refl ect on and celebrate the past. But for us, it’s more than that…it’s an oppor- tunity to look forward to our next 100 years. GM’s centennial comes at an exciting time for the 2007 YEAR IN REVIEW auto industry, as we move aggressively to realize the 2007 was another year of important progress for GM, potential of two huge trends that are transforming the as we implemented further signifi cant structural cost global auto industry and society itself. The fi rst trend is reductions in North America, grew aggressively in emerg- the rapidly growing role, and importance, of emerging ing markets, negotiated an historic labor contract with markets.
    [Show full text]