Carpentry MO SkillsUSA 2017 Tool List

Supplied by the contestant: ___ Sawhorses (4’ max) (no lumber will be furnished for sawhorses) ___ Hard hat ___ Safety glasses, goggles or prescription glasses with side shields ___ Work boots ___ 8 pt. crosscut saw (10 pt. or 12 pt. optional) ___ Claw hammer ___ Chisel set ¼” to 1” (optional) ___ Framing square ___ 6’ folding rule and/or 16’ or longer steel tape measure ___ Utility knife with standard and hookbill blades ___ Two pencils ___ 1 Phillips and standard screw driver ___ Wrecking bar or gooseneck pinch bar ___ Cat’s paw (nail puller) ___ Chalk box and line ___ 24” or 30” spirit level ___ Combination wood rasp and file 8” (optional) ___ Carpenter’s tool and nail pouch with belt and/or suspenders ___ Stairs gauges (optional) ___ Combination square and/or speed square ___ 25’ power cord (UL approved grounded) ___ Calculator – no scientific calculators ___ Power circular hand saw with new carbide-tipped blade ___ Sliding T-bevel (optional) ___ Hand plane (optional) ___ Clamps ___ One page, typewritten resume

NO RAFTER BOOKS PERMITTED

Clothing requirement:  Appropriate job-related clothing or  Blue jeans (no rips or tears) and SkillsUSA conference t-shirt  Black or brown leather work shoes or boots  Safety glasses with side shields or goggles Note: No shorts, open-toed shoes or mid-riffs exposed. If a school uniform is worn, the nametag or logo must be removed or covered.

Pre-Contest Meeting and Contest: Date: Friday, April 7 Time: 8:00 a.m. – Completion Pre-Contest Meeting Location: Heavy Equip Ops Building - CAT Classroom - STC (8) Contest Location: Heavy Equip Ops Building - Shop - STC (8)

Remember to prepare for the Professional Development Program (PDP) Knowledge test!