State of the Science Literature Review: Nano Titanium Dioxide

Total Page:16

File Type:pdf, Size:1020Kb

State of the Science Literature Review: Nano Titanium Dioxide Scientific, Technical, Research, Engineering and Modeling Support (STREAMS) Final Report State of the Science Literature Review: Nano Titanium Dioxide Environmental Matters R E S E A R C H A N D D E V E L O P M E N T EPA/600/R-10/089 August 2010 www.epa.gov Scientific, Technical, Research, Engineering and Modeling Support (STREAMS) Final Report Contract No. EP-C-05-059 Task Order No. 94 State of the Science Literature Review: Nano Titanium Dioxide Environmental Matters Prepared for Katrina Varner, Task Order Manager U.S. Environmental Protection Agency National Exposure Research Laboratory Environmental Sciences Division Las Vegas, NV 89119 Prepared by Eastern Research Group 10200 Alliance Road, Suite 190 Cincinnati, OH 45242 Although this work was reviewed by EPA and approved for publication, it may not necessarily reflect official Agency policy. Mention of trade names and commercial products does not constitute endorsement or recommendation for use. U.S. Environmental Protection Agency Office of Research and Development Washington, DC 20460 CONTENTS Page 1. EXECUTIVE SUMMARY......................................................................................................1-1 2. PURPOSE OF REPORT.........................................................................................................2-1 3. LITERATURE AND GRAY INFORMATION SEARCH STRATEGY.............................................3-1 3.1 Dialog® Search Strategy and Results..................................................................3-1 3.1.1 Dialog® Search Parameters.....................................................................3-2 3.1.2 Dialog® Search Procedure and Results...................................................3-4 3.2 Targeted Search of Databases, Journals, and Conference Proceedings and Results..................................................................................................................3-7 3.2.1 Nano-specific Journals.............................................................................3-7 3.2.2 Conference Proceedings...........................................................................3-7 3.2.3 Databases of Nanotechnology Research..................................................3-8 3.3 Contacts with Industry and Academic Experts....................................................3-9 3.4 Results and Areas for Future Work ...................................................................3-10 4. BACKGROUND OF TITANIUM DIOXIDE AND ITS USE ..........................................................4-1 4.1 Titanium Dioxide Physical and Chemical Properties ..........................................4-1 4.2 Overview of Applications of Titanium Dioxide ..................................................4-2 4.2.1 Historical Applications of Titanium Dioxide ..........................................4-2 4.2.2 Applications of Nanoscale Titanium Dioxide..........................................4-4 5. LIFE CYCLE OVERVIEW ....................................................................................................5-1 5.1 Manufacture of Nano-TiO2 ..................................................................................5-3 5.1.1 Manufacture of Nano-TiO2 for Sunscreens ...........................................5-10 5.1.2 Manufacture of Nano-TiO2 for Other UV Stabilizers............................5-11 5.1.3 Manufacture of Nano-TiO2 for Photocatalysts ......................................5-11 5.2 Processing of Nano-TiO2 ...................................................................................5-11 5.2.1 Processing of Nano-TiO2 for Sunscreens ..............................................5-12 5.2.2 Processing of Nano-TiO2 for Other UV Stabilizers...............................5-12 5.2.3 Processing of Nano-TiO2 for Photocatalysts .........................................5-13 5.3 Use of Nano-TiO2 ..............................................................................................5-13 5.3.1 Use of Nano-TiO2 in Sunscreens ...........................................................5-13 5.3.2 Use of Nano-TiO2 as Other UV Stabilizers ...........................................5-14 5.3.3 Use of Nano-TiO2 as Photocatalysts......................................................5-14 5.4 End of Life .........................................................................................................5-15 5.4.1 End-of-Life of Sunscreens .....................................................................5-15 5.4.2 End-of-Life of Other UV Stabilizers .....................................................5-16 5.4.3 End-of-Life of Photocatalysts................................................................5-16 6. EXPOSURE PATHWAYS......................................................................................................6-1 6.1 Exposure Sources.................................................................................................6-1 6.1.1 Manufacturing..........................................................................................6-1 6.1.2 Processing ................................................................................................6-3 6.1.3 Use ...........................................................................................................6-4 6.1.4 End-of-Life of Consumer Products..........................................................6-6 i CONTENTS (Continued) Page 6.2 Transport Mechanisms.........................................................................................6-8 6.2.1 Transport Mechanisms in Surface Water.................................................6-8 6.2.2 Transport Mechanisms in Groundwater...................................................6-9 6.2.3 Transport Mechanisms in Soil ...............................................................6-10 6.2.4 Transport Mechanisms in Air ................................................................6-11 6.3 Points and Routes of Exposure ..........................................................................6-11 6.3.1 Dermal Exposures..................................................................................6-11 6.3.2 Inhalation Exposures..............................................................................6-11 6.3.3 Ingestion Exposures...............................................................................6-11 6.4 Receptor Populations .........................................................................................6-12 7. TOXIC EFFECTS.................................................................................................................7-1 7.1 Health Effects.......................................................................................................7-1 7.1.1 Inhalation Studies or Effects....................................................................7-3 7.1.2 Dermal Studies or Effects ........................................................................7-4 7.1.3 Oral Administration Studies or Effects....................................................7-4 7.2 Ecological Effects ................................................................................................7-4 7.2.1 Aquatic Life .............................................................................................7-4 7.2.2 Terrestrial Life .........................................................................................7-5 7.3 Additional Literature............................................................................................7-5 8. SAMPLING AND ANALYSIS ................................................................................................8-1 8.1 Sampling Techniques...........................................................................................8-1 8.1.1 Sampling Techniques Suited for Surface Waters ....................................8-2 8.1.2 Sampling Techniques Suited for Sediments ............................................8-2 8.1.3 Sampling Techniques Suited for Soil ......................................................8-3 8.1.4 Sampling Techniques Suited for Groundwater........................................8-3 8.1.5 Sampling Techniques Suited for Air........................................................8-3 8.2 Analytical Techniques .........................................................................................8-3 8.2.1 Analytical Techniques for Size Fractionation..........................................8-4 8.2.2 Analytical Techniques for Size Distribution............................................8-5 8.2.3 Analytical Techniques for Surface Area..................................................8-8 8.2.4 Analytical Techniques for Chemical Analysis ........................................8-8 8.2.5 Analytical Techniques for Direct Visualization ......................................8-8 8.2.6 Analytical Techniques for Mineral Phase/Internal Structure...................8-9 9. REFERENCES .....................................................................................................................9-1 APPENDIX A DIALOG® SEARCH RESULTS A-1 Potentially Applicable Titles for Production, Use, Distribution, and Disposal of Nano-TiO2 A-2 Potentially Applicable Titles for Exposure Pathways and Transport Mechanisms A-3 Potentially Applicable Titles for Toxicological and Ecological Effects of Nano­ TiO2 A-4 Potentially Applicable Titles for Sampling and Analysis of Nano-TiO2 in the Environment ii CONTENTS (Continued) Page A-5 Non-applicable Titles iii LIST OF TABLES Page Table 3-1.
Recommended publications
  • Contents Part a Nanocarbons
    Contents Foreword by Claes-Goran Granqvist V Foreword by Neal Lane VII List of Abbreviations XXIX 1 Science and Engineering of Nanomaterials Robert Vajtai 1 1.1 History and Definition of Nanomaterials 2 1.2 Formation of Nanomaterials 6 1.3 Properties of Nanomaterials 10 1.k Typical Applications of Nanomaterials 22 1.5 Concluding Remarks 31 1.6 About the Contents of the Handbook 31 References 31 Part A NanoCarbons 2 Graphene - Properties and Characterization Aravind Vijayaraghavan 39 2.1 Methods of Production k2 2.2 Properties 50 2.3 Characterization 58 2.k Applications 69 2.5 Conclusions and Outlook 1W References 74 3 Fullerenes and Beyond: Complexity, Morphology, and Functionality in Closed Carbon Nanostructures Humberto Terrones 83 3.1 Geometry and Structural Features of Fullerenes 85 3.2 Methods of Synthesis of Fullerenes and Proposed Growth Models.... 88 3.3 Physicochemical Properties of Fullerenes 90 3.4 Applications of Fullerenes and Beyond 92 3.5 Conclusions 99 References 99 k Single-Walled Carbon Nanotubes Sebastien Nanot, Nicholas A. Thompson, Ji-Hee Kim, Xucin Wang, William D. Rice, Erik H. Haroz, Yogeeswaran Ganesan, Cary L. Pint, Junichiro Kono 105 4.1 History 106 4.2 Crystallographic and Electronic Structure 106 http://d-nb.info/1012138798 4.3 Synthesis Ill 4.4 Optical Properties 115 4.5 Transport Properties 123 4.6 Thermal and Mechanical Properties 128 4.7 Concluding Remarks 135 References 135 5 Multi-Walled Carbon Nanotubes Akos Kukovecz, Gabor Kozma, Zoltan Kdnya 147 5.1 Synthesis 148 5.2 Chemistry of MWCNTs 153 5.3 Properties 157 5.4 Selected Applications 163 References 169 6 Modified Carbon Nanotubes Aaron Morelos-Gomez, Ferdinando Tristan Lopez, Rodolfo Cruz-Silva, Sofia M.
    [Show full text]
  • Brno University of Technology
    BRNO UNIVERSITY OF TECHNOLOGY Faculty of Chemistry DOCTORAL THESIS Brno, 2016 Ing. Tomá Solný BRNO UNIVERSITY OF TECHNOLOGY VYSOKÉ UENÍ TECHNICKÉ V BRN FACULTY OF CHEMISTRY FAKULTA CHEMICKÁ INSTITUTE OF MATERIALS SCIENCE ÚSTAV CHEMIE MATERIÁL SYNTHESIS AND PHOTOCATALYTIC APPLICATIONS OF TITANIUM DIOXIDE PÍPRAVA A APLIKACE FOTOKATALYTICKY AKTIVNÍHO OXIDU TITANIITÉHO DOCTORAL THESIS DIZERTANÍ PRÁCE AUTHOR Ing. Tomá Solný AUTOR PRÁCE SUPERVISOR doc. Ing. Petr Ptáek, Ph.D. KOLITEL BRNO 2016 ABSTRACT Hydrolysis conditions for different Ti-alkoxides were examined considering the impact of water to alkoxide ratio and temperature. The prepared hydrolysates and sintered TiO2 nanoparticles were examined with XRD, DTA – TGA, SEM – EDS, BET and PCCS analysis in order to identify the impact of hydrolysis on properties of prepared anatase particles. Magnetite nanoparticles were synthetized by easy one step precipitation method from Mohr´s salt solution and their crystallinity, size and surface properties were examined investigating the influence of temperature and coating by polycarboxylate ether superplasticizer. For immobilization of TiO2 on surfaces of magnetite combined method using the selected nanoparticles of TiO2 and Ti-alkoxides hydrolysis is performed in order to obtain photocatalytically active core–shell powder catalysator with enhanced adsorptive properties. Also the investigation on the applications of TiO2 on surfaces of Mn-Zn ferrite is done with studying the surface treatment by CVD deposition of C and Au layer. Photocatalytic activity of selected prepared photocatalysators is evaluated upon decomposition of methylene blue and isopropanolic and ethanolic vapors for Mn-Zn ferrite in experimental chemical reactor with magnetically holded powdered photocatalysator beds. KEYWORDS: Titanium oxide, anatase, photocatalytic activity, core-shell powder photocatalysator, magnetite, Mn-Zn ferrite, Ti-alkoxides, hydrolysis, sol-gel, nanoparticles.
    [Show full text]
  • Open Cyphersthesis FINAL.Pdf
    The Pennsylvania State University The Graduate School College of Engineering RESEARCH ON LOW FREQUENCY COMPOSITE TRANSDUCERS FABRICATED USING A SOL-GEL SPRAY-ON METHOD A Thesis in Engineering Science by Robert L. Cyphers c 2012 Robert L. Cyphers Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Science December 2012 The thesis of Robert L. Cyphers was reviewed and approved∗ by the following: Bernhard R. Tittmann Schell Professor of Engineering Science and Mechanics Thesis Advisor Clifford Lissenden Professor of Engineering Science and Mechanics Mark W. Horn Professor of Engineering Science and Mechanics Judith A. Todd Professor of Engineering Science and Mechanics // P. B. Breneman Department Head Head of the Department of Engineering Science and Mechanics ∗Signatures are on file in the Graduate School. Abstract Ultrasonic nondestructive evaluation is currently used in countless applications to maintain a system's operational integrity. Piezoelectric transducers are the devices commonly used in this field to search for defects. A sol-gel fabrication method utilizing a spray-on deposition method has proven to produce ultrasonic transducers useful in harsh environments. This procedure produces thin film transducers, which adhere directly to a substrate making it favorable in use with irregular surface geometries. These transducers operate at relatively high frequencies due to their minute thickness. The objective of this research is to investigate the ability for low frequency operation into the low kilohertz range. Depositing thicker layers of piezoelectric composites, including bismuth titanate and lead zirconate titanate, led to adhesion problems between the metal substrates and ceramic material. Delamination of the piezoelectric elements was determined to be caused by a large mismatch in thermal expansion coefficients.
    [Show full text]
  • Photoacoustic Measurements of Porphyrin Triplet-State Quantum Yields and Singlet-Oxygen Efficiencies
    FULL PAPER Photoacoustic Measurements of Porphyrin Triplet-State Quantum Yields and Singlet-Oxygen Efficiencies Marta Pineiro, Ana L. Carvalho, Mariette M. Pereira, A. M. dA. Rocha Gonsalves, Luís G. Arnaut,* and SebastiaÄo J. Formosinho Abstract: Photoacoustic calorimetry was used to measure the quantum yields of singlet molecular oxygen production by the triplet states of tetraphenylporphyrin (TPP), ZnTPP and CuTPP in toluene, yielding values of 0.67 Æ 0.14, 0.68 Æ 0.19 Keywords: metalloporphyrins ´ and 0.03 Æ 0.01, respectively. We show that a novel dichlorophenyl derivative of photoacoustic calorimetry ´ por- ZnTPP is capable of singlet-oxygen production with a 0.90 Æ 0.07 quantum yield. phyrinoids ´ singlet oxygen ´ sensi- The synthesis and characterisation of a new photostable chlorin with high absorptivity tizers in the red that is capable of singlet-oxygen production with 0.54 Æ 0.06 quantum yield is described. Our results suggest that chlorinated chlorins may be interesting new sensitisers for photodynamic therapy. Introduction Type II photooxygenation process in cells.[7, 8] Adequate sensitisers have specific biological and photochemical proper- The ubiquitous tetrapyrrolic macrocycles play highly diverse ties. The desired biological features of the sensitiser are: roles in biological systems.[1±5] The natural roles of these 1) little or no dark toxicity structures stimulated the search for new applications, exploit- 2) selective accumulation and prolonged retention in tumour ing in particular the use of new synthetic porphyrins.[6] One of tissues the more recent and promising applications of porphyrin 3) controlled photofading to reduce the unwanted skin chemistry in medicine is in the detection and cure of photosensitivity side effects and increase light penetration tumours,[7, 8] referred to as photodynamic therapy (PDT).
    [Show full text]
  • High Temperature Ultrasonic Transducers: a Review
    sensors Review High Temperature Ultrasonic Transducers: A Review Rymantas Kazys * and Vaida Vaskeliene Ultrasound Research Institute, Kaunas University of Technology, Barsausko st. 59, LT-51368 Kaunas, Lithuania; [email protected] * Correspondence: [email protected] Abstract: There are many fields such as online monitoring of manufacturing processes, non-destructive testing in nuclear plants, or corrosion rate monitoring techniques of steel pipes in which measure- ments must be performed at elevated temperatures. For that high temperature ultrasonic transducers are necessary. In the presented paper, a literature review on the main types of such transducers, piezoelectric materials, backings, and the bonding techniques of transducers elements suitable for high temperatures, is presented. In this review, the main focus is on ultrasonic transducers with piezoelectric elements suitable for operation at temperatures higher than of the most commercially available transducers, i.e., 150 ◦C. The main types of the ultrasonic transducers that are discussed are the transducers with thin protectors, which may serve as matching layers, transducers with high temperature delay lines, wedges, and waveguide type transducers. The piezoelectric materi- als suitable for high temperature applications such as aluminum nitride, lithium niobate, gallium orthophosphate, bismuth titanate, oxyborate crystals, lead metaniobate, and other piezoceramics are analyzed. Bonding techniques used for joining of the transducer elements such as joining with glue, soldering,
    [Show full text]
  • Electronic Spectroscopy of Free Base Porphyrins and Metalloporphyrins
    Absorption and Fluorescence Spectroscopy of Tetraphenylporphyrin§ and Metallo-Tetraphenylporphyrin Introduction The word porphyrin is derived from the Greek porphura meaning purple, and all porphyrins are intensely coloured1. Porphyrins comprise an important class of molecules that serve nature in a variety of ways. The Metalloporphyrin ring is found in a variety of important biological system where it is the active component of the system or in some ways intimately connected with the activity of the system. Many of these porphyrins synthesized are the basic structure of biological porphyrins which are the active sites of numerous proteins, whose functions range from oxygen transfer and storage (hemoglobin and myoglobin) to electron transfer (cytochrome c, cytochrome oxidase) to energy conversion (chlorophyll). They also have been proven to be efficient sensitizers and catalyst in a number of chemical and photochemical processes especially photodynamic therapy (PDT). The diversity of their functions is due in part to the variety of metals that bind in the “pocket” of the porphyrin ring system (Fig. 1). Figure 1. Metallated Tetraphenylporphyrin Upon metalation the porphyrin ring system deprotonates, forming a dianionic ligand (Fig. 2). The metal ions behave as Lewis acids, accepting lone pairs of electrons ________________________________ § We all need to thank Jay Stephens for synthesizing the H2TPP 2 from the dianionic porphyrin ligand. Unlike most transition metal complexes, their color is due to absorption(s) within the porphyrin ligand involving the excitation of electrons from π to π* porphyrin ring orbitals. Figure 2. Synthesis of Zn(TPP) The electronic absorption spectrum of a typical porphyrin consists of a strong transition to the second excited state (S0 S2) at about 400 nm (the Soret or B band) and a weak transition to the first excited state (S0 S1) at about 550 nm (the Q band).
    [Show full text]
  • The Nanotoxicology of a Newly Developed Zero-Valent Iron
    The nanotoxicology of a newly developed zero-valent iron nanomaterial for groundwater remediation and its remediation efficiency assessment combined with in vitro bioassays for detection of dioxin-like environmental pollutants Von der Fakultät für Mathematik, Informatik und Naturwissenschaften der RWTH Aachen University zur Erlangung des akademischen Grades eines Doktors der Naturwissenschaften genehmigte Dissertation vorgelegt von Diplom-Biologe Andreas Herbert Schiwy aus Tarnowitz (Polen) Berichter: Universitätsprofessor Dr. rer. nat. Henner Hollert Universitätsprofessor Dr. rer. nat. Andreas Schäffer Tag der mündlichen Prüfung 28. Juli 2016 Diese Dissertation ist auf den Internetseiten der Universitätsbibliothek online verfügbar. To my wife and my children Summary Summary The assessment of chemicals and new compounds is an important task of ecotoxicology. In this thesis a newly developed zero-valent iron material for nanoremediation of groundwater contaminations was investigated and in vitro bioassays for high throughput screening were developed. These two elements of the thesis were combined to assess the remediation efficiency of the nanomaterial on the groundwater contaminant acridine. The developed in vitro bioassays were evaluated for quantification of the remediation efficiency. Within the NAPASAN project developed iron based nanomaterial showed in a model field application its nanoremediation capabilities to reduce organic contaminants in a cost effective way. The ecotoxicological evaluation of the nanomaterial in its reduced and oxidized form was conducted with various ecotoxicological test systems. The effects of the reduced nanomaterial with field site resident dechlorinating microorganisms like Dehalococcoides sp., Desulfitobacterium sp., Desulfomonile tiedjei, Dehalobacter sp., Desulfuromonas sp. have been investigated in batch und column experiments. A short-term toxicity of the reduced nanomaterial was shown.
    [Show full text]
  • WO 2017/031289 Al 23 February 2017 (23.02.2017) P O P C T
    (12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT) (19) World Intellectual Property Organization International Bureau (10) International Publication Number (43) International Publication Date WO 2017/031289 Al 23 February 2017 (23.02.2017) P O P C T (51) International Patent Classification: (81) Designated States (unless otherwise indicated, for every A01N 25/04 (2006.01) A01N 25/24 (2006.01) kind of national protection available): AE, AG, AL, AM, A 59/00 (2006.01) AOIN25/26 (2006.01) AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, A0 33/12 (2006.01) BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, (21) International Application Number: HN, HR, HU, ID, IL, IN, IR, IS, JP, KE, KG, KN, KP, KR, PCT/US20 16/047509 KZ, LA, LC, LK, LR, LS, LU, LY, MA, MD, ME, MG, (22) International Filing Date: MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, 18 August 2016 (18.08.2016) PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SA, SC, SD, SE, SG, SK, SL, SM, ST, SV, SY, TH, TJ, TM, TN, (25) Filing Language: English TR, TT, TZ, UA, UG, US, UZ, VC, VN, ZA, ZM, ZW. (26) Publication Language: English (84) Designated States (unless otherwise indicated, for every (30) Priority Data: kind of regional protection available): ARIPO (BW, GH, 62/207,750 20 August 2015 (20.08.2015) US GM, KE, LR, LS, MW, MZ, NA, RW, SD, SL, ST, SZ, TZ, UG, ZM, ZW), Eurasian (AM, AZ, BY, KG, KZ, RU, (71) Applicant: INTEGRICOTE, INC.
    [Show full text]
  • WO 2015/061786 A2 30 April 2015 (30.04.2015) P O P C T
    (12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT) (19) World Intellectual Property Organization International Bureau (10) International Publication Number (43) International Publication Date WO 2015/061786 A2 30 April 2015 (30.04.2015) P O P C T (51) International Patent Classification: (81) Designated States (unless otherwise indicated, for every E21B 43/26 (2006.01) E21B 47/06 (2006.01) kind of national protection available): AE, AG, AL, AM, AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, (21) International Application Number: BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, PCT/US20 14/062440 DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, (22) International Filing Date: HN, HR, HU, ID, IL, IN, IR, IS, JP, KE, KG, KN, KP, KR, 27 October 2014 (27.10.2014) KZ, LA, LC, LK, LR, LS, LU, LY, MA, MD, ME, MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, (25) Filing Language: English PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SA, SC, (26) Publication Language: English SD, SE, SG, SK, SL, SM, ST, SV, SY, TH, TJ, TM, TN, TR, TT, TZ, UA, UG, US, UZ, VC, VN, ZA, ZM, ZW. (30) Priority Data: 61/895,873 25 October 2013 (25. 10.2013) US (84) Designated States (unless otherwise indicated, for every 61/898, 107 31 October 2013 (3 1. 10.2013) US kind of regional protection available): ARIPO (BW, GH, GM, KE, LR, LS, MW, MZ, NA, RW, SD, SL, ST, SZ, (72) Inventors; and TZ, UG, ZM, ZW), Eurasian (AM, AZ, BY, KG, KZ, RU, (71) Applicants : CONWAY, Andrew, Bryce [US/US]; 1501 TJ, TM), European (AL, AT, BE, BG, CH, CY, CZ, DE, Timbercreek Drive, Weatherford, OK 73096 (US).
    [Show full text]
  • Rational Chemical Design of Solar-Powered Nano Photocatalysts for Environmental Applications
    Rational Chemical Design of Solar-Powered Nano Photocatalysts for Environmental Applications Being a Thesis submitted for the Degree of Doctor of Philosophy degree (PhD) in the University of Hull By Khadijah Mohammedsaleh M Katubi (January 2015) Declaration I, Khadijah Mohammedsaleh M Katubi of Student Number: 200892573, hereby declare that this project, Rational Chemical Design of Solar-Powered Nano Photocatalysts for Environmental Applications being the requirement of the Hull University PhD Faculty of Science of Engineering (FOSE), Chemistry department, Academic Year 2015, is entirely of my own effort and work with the exception of excerpts cited from other works of which the sources were duly noted and acknowledged in the bibliography. Copyright © 2015 by Khadijah Mohammedsaleh M Katubi. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright holder E-mail: [email protected] and [email protected] Acknowledgements Firstly, I would like to express my deepest gratitude to Almighty Allah for the assistance. Allah has given me patience, continued support and guidance without which this work would not be accomplished. Secondly, I owe sincere thanks to my supervisor Dr M. Grazia Francesconi for her continued backing, sincere affection and the assistance given to me throughout my PhD. I would also like to thank Dr Nigel A. Young for his assistance in FT-IR and UV-Vis spectroscopy. Lots of thanks go to Dr M. Grazia Francesconi, Dr Timothy J. Prior, Dr Vincent Rocher and PhD Simon Fellows for the assistance and sharing knowledge in XRD analysis. Many thanks go to Zabeada Aslamb at Leeds University for their help in TEM, SAED and EELS.
    [Show full text]
  • Nanomedicine and Medical Nanorobotics - Robert A
    BIOTECHNOLOGY– Vol .XII – Nanomedicine and Medical nanorobotics - Robert A. Freitas Jr. NANOMEDICINE AND MEDICAL NANOROBOTICS Robert A. Freitas Jr. Institute for Molecular Manufacturing, Palo Alto, California, USA Keywords: Assembly, Nanomaterials, Nanomedicine, Nanorobot, Nanorobotics, Nanotechnology Contents 1. Nanotechnology and Nanomedicine 2. Medical Nanomaterials and Nanodevices 2.1. Nanopores 2.2. Artificial Binding Sites and Molecular Imprinting 2.3. Quantum Dots and Nanocrystals 2.4. Fullerenes and Nanotubes 2.5. Nanoshells and Magnetic Nanoprobes 2.6. Targeted Nanoparticles and Smart Drugs 2.7. Dendrimers and Dendrimer-Based Devices 2.8. Radio-Controlled Biomolecules 3. Microscale Biological Robots 4. Medical Nanorobotics 4.1. Early Thinking in Medical Nanorobotics 4.2. Nanorobot Parts and Components 4.3. Self-Assembly and Directed Parts Assembly 4.4. Positional Assembly and Molecular Manufacturing 4.5. Medical Nanorobot Designs and Scaling Studies Acknowledgments Bibliography Biographical Sketch Summary Nanomedicine is the process of diagnosing, treating, and preventing disease and traumatic injury, of relieving pain, and of preserving and improving human health, using molecular tools and molecular knowledge of the human body. UNESCO – EOLSS In the relatively near term, nanomedicine can address many important medical problems by using nanoscale-structured materials and simple nanodevices that can be manufactured SAMPLEtoday, including the interaction CHAPTERS of nanostructured materials with biological systems. In the mid-term, biotechnology will make possible even more remarkable advances in molecular medicine and biobotics, including microbiological biorobots or engineered organisms. In the longer term, perhaps 10-20 years from today, the earliest molecular machine systems and nanorobots may join the medical armamentarium, finally giving physicians the most potent tools imaginable to conquer human disease, ill-health, and aging.
    [Show full text]
  • Redalyc.PHYSICAL-CHEMICAL PROPERTIES of BISMUTH AND
    Dyna ISSN: 0012-7353 [email protected] Universidad Nacional de Colombia Colombia BEDOYA HINCAPIÉ, CLAUDIA MILENA; PINZÓN CÁRDENAS, MANUEL JONATHAN; ALFONSO ORJUELA, JOSE EDGAR; RESTREPO PARRA, ELISABETH; OLAYA FLOREZ, JHON JAIRO PHYSICAL-CHEMICAL PROPERTIES OF BISMUTH AND BISMUTH OXIDES: SYNTHESIS, CHARACTERIZATION AND APPLICATIONS Dyna, vol. 79, núm. 176, diciembre, 2012, pp. 139-148 Universidad Nacional de Colombia Medellín, Colombia Available in: http://www.redalyc.org/articulo.oa?id=49624953018 How to cite Complete issue Scientific Information System More information about this article Network of Scientific Journals from Latin America, the Caribbean, Spain and Portugal Journal's homepage in redalyc.org Non-profit academic project, developed under the open access initiative PHYSICAL-CHEMICAL PROPERTIES OF BISMUTH AND BISMUTH OXIDES: SYNTHESIS, CHARACTERIZATION AND APPLICATIONS PROPIEDADES FÍSICO-QUÍMICAS DEL BISMUTO Y OXIDOS DE BISMUTO: SÍNTESIS, CARACTERIZACIÓN Y APLICACIONES CLAUDIA MILENA BEDOYA HINCAPIÉ Ing. Física, Universidad Nacional de Colombia – Sede Bogotá, [email protected] MANUEL JONATHAN PINZÓN CÁRDENAS Ing. Mecatrónico, Universidad Nacional de Colombia – Sede Bogotá, [email protected] JOSE EDGAR ALFONSO ORJUELA PhD. Física, Universidad Nacional de Colombia – Sede Bogotá, [email protected] ELISABETH RESTREPO PARRA PhD. Ingeniería, Universidad Nacional de Colombia - Sede Manizales, [email protected] JHON JAIRO OLAYA FLOREZ PhD. Materiales, Universidad Nacional de Colombia - Sede Bogotá, [email protected] Received for review March 10 th, 2012, accepted June 29th, 2012, final version July, 9 th, 2012 ABSTRACT: The physical-chemical properties of bismuth and its oxides have been studied over the last two decades. As a result of this research, the growth of these materials with different crystallographic structures, showing micro and nanometric dimensions has been achieved by using several techniques (cathodic pulverization, laser pulsed deposition and hydrothermal method, among others).
    [Show full text]