Lab Equipment List Manufacturer Model Type Description Image Operation Service Qty Manual Manual HP 16500B HP 16500B Logic Analysis System. With Modules: 16517A 4GHz Yes Yes Logic Analysis Timing / 1GHz Synchronous With 2-MasterPod - Note 1- System Cable To MasterPod Damaged; 16532A 1GSa/s ; 16550A 100Mhz State / 500MHz Timing With (3) Data Pods] 1

AGILENT E3610A 30W Power Agilent basic DC power supplies offer essential features for Yes Yes Supply, 8V, 3A a tight budget. The single output, 30-60 W, E3610A-E3617A or 15V, 2A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A). The Agilent 30W, single output E3610A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and 2 enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C) * Range 1: 0 to 8 V, 0 to 3 A * Range 2: 0 to 15 V, 0 to 2 A * Power (max): 30 W

AGILENT 33220A 20MHz Function The Agilent Technologies 33220A is a 20 MHz synthesized Yes Yes Arbitrary with built-in arbitrary waveform and pulse Waveform capabilities. Generator Its combination of bench-top and system features makes this function generator a versatile solution for your testing requirements now and in the future. Convenient bench-top features • 10 standard waveforms • Built-in 14-bit 50 MSa/s arbitrary waveform capability • Precise pulse waveform capabilities with adjustable edge time • LCD display provides numeric and graphical views • Easy-to-use knob and numeric keypad 1 • Instrument state storage with user-defined names • Portable, ruggedized case with non-skid feet Flexible system features • Four downloadable 64K-point arbitrary waveform memories • GPIB (IEEE-488), USB, and LAN remote interfaces are standard • LXI Class C Compliant • SCPI (Standard Commands for Programmable Instruments) compatibility

HP 6621A Powe Supply High Performance DC Power Supply. Two fully isolated Yes Yes power supplies in a 3 U package Dual-range outputs 0 to 20V 0 to 2A; 0 to 50V 0 to 0.8A Fast, low-noise outputs 1 Built-in measurements and advanced programmable features Protection features to ensure DUT safety

HP 4192A Network The 4192A LF Impedance Analyzer performs both network Yes Yes Analyzer analysis and impedance analysis on such devices as telecommunication filters, audio/video electronic circuits, and basic electronic components. Both floating and grounded devices can be tested. • Frequency Range: 5Hz to 13MHz • Frequency Accuracy: ±50 ppm • Impedance Measurement : |Z|, R, X: 0.1 milliohm to 1 Megohm // |Y|, G, B: 1 nS to 10 S // L (*2): 0.01 nH to 1 kH (*1) // C (*2): 0.1 fF to 100 mF (*1) // D: 0.0001 to 10.000 // Q: 0.1 to 1000.0 1 //Phase: -180.00 deg to +180.00 deg // Amplitude-Phase Measurement : B-A: 0 to +/- 100dB (*1), up to 0.001 dB resolution // Phase: -180 to +180 deg, resolution 0.01 deg // A, B,: +0.8 to -100 dBV (*1), +13.8 to -87 dBm (*1), resolution: 0.001 dB // Group Delay: 0.1 ns to 10 s // 50 ohm feed thru terminations (2) •Power Splitter •BNC Cables (2) •BNC Adapter

HP 16047A Test Fixture The Agilent 16047A is designed for impedance evaluation Yes Yes of axial/radial lead type devices of up to 13MHz. The Agilent 16047A employs Kelvin contacts which realize a wide impedance measurement range. The contact tip can be 1 changed according to the device shape.

Kelvin Clip Kelvin Klips allow solid four-terminal, Kelvin Leads connections to leaded components. The jaws are assembled with hardened gold-plated, beryllium copper, which ensures low contact resistance, low 1 thermal emf to copper, high corrosion resistance, and long service life. An alligator clip is provided allowing connection of a passive guard.

ESI 2005B Tweezer Four-terminal tweezers make solid connections to chip components in manual sorting applications. Capacity of jaws is 12.7mm (0.5 in.). The 2005B Tweezers 1 include a 1.5m (5 ft) cable. Contact tips are replaceable.

Delta Omega Sarl 06/12/2010 1/7 Lab Equipment List HP 5328A Universal The 5328A Universal Counter makes frequency, period, Yes Yes Counter multiple point average, time interval, time interval average, totalize, ratio, voltage and electronically controlled totalize measurements. Burst and CW measurements to 100MHz. Resolution of 100 ns single shot time interval measurements. Time interval averaging has a resolution better than 10 ps for repetitive time intervals as short as 100 ps. Marker outputs (operational to 100MHz) shows real time triggering for use with oscilloscope monitoring. Timebase is 1 10MHz with stability <3x10E-07 per month. 9-digit display with 9th digit used only with channel C functions and zero suppression to left of reading. Switchable x1 and x10 attenuators for each of the two inputs. •Option 010 = High Stability Time Base •Option 011 = HP-IB Interface •Option 030 = 512MHz Channel C •Option 041 = Programmable Input Controls Module

HP 5334B Universal Logically laid-out front panel with simple push-button design No No Counter makes the 5334B Universal Counter one of the easiest counters to use?its capabilities make it one of the most usable counters available. High performance starts with two matched 100MHz input channels and displays with 9 digits per second resolution. You'll find the features and abilities of this counter are endless- with the push of a button, automatic rise/fall time, pulse width and AC/DC voltage measurements, auto triggering and auto attenuation, as well as frequency and period measurements, time interval and time interval delay, external arming/gating for synchronizing 1 measurements to external events, plus much more! Of course, all of this power is available via the front panel or automated using the built-in HP-IB interface. Other great features include the ability that enables the operator to store & recall up to 10 front-panel setups. •Option 010 = High Stability Timebase 10MHz with stability <3x10E-07 per month •Option 011 = HPIB •Option 041 = Programmable input module

HP 5335A Universal The 5335A Universal Counter is a high performance Yes Yes Counter 200MHz/2 ns counter with built-in automatic rise time, duty cycle, pulse width, slew rate, and phase measurement capability. Other features include advanced automatic triggering capabilities and the HP-IB plus math & statistics functions are standard. Great counter for the anything from simple frequency measurements to elaborate automated 1 testing applications. Option 010 = Oven Oscillator Option 020 = DVM Option •Option 040 = Expanded HP-IB Control •Option 908 = Rack Flange Kit for Use Without Handles •Option 913 = Rack Flange Kit for Use With Supplied Front Handles

Hitachi V-1100A Oscilloscope 100 MHz Quad Channel Oscilloscope. * 4 Channels * 8- Yes No 100MHz Trace * Delayed Sweep * CRT Readout * Digital Measurement

1

Fluke 8840A Multimètre The 8840A/AF Digital continues to provide an Yes Yes outstanding combination of low price and high performance. The unit features: • 0.005% basic dc accuracy at 1 year • Ease of IEEE-488 system integration • Closed case calibration • Extensive self-test • High reliability • Vacuum fluorescent display •5 1/2 digit display •Ohms and DC current standard •Up to 100 readings per second system 2 speed •1 µV to 1000 V DC, 2000 mA DC, 20 Mohms •AC voltage and current standard - maximum ac input 1000V rms •DC/DC voltage ratio •Enhanced environmental envelope and EMI/RFI protection •Compliance wil MIL-T- 28800C Type 11, Class 3, Style B

Tektronix 7904A Oscilloscope The 7904A Oscilloscope Mainframe has a 500MHz Yes Yes bandwidth at 10 mV/div; 700 pS rise time; 500 pS/div fastest calibrated sweep rate. Accepts 7000-Series amplifiers and specialized plug-ins. 1Dec2004: Power supply problem. Repair in progress. 2

Tektronix 7613 Oscilloscope The Tektronix 7613 is a Digital Storage Oscilloscope Yes No Mainframes that has 3 Slots with a bandwidth of 100 MHz.

1

Tektronix 7903 Oscilloscope The Tektronix 7903 is an Analog Oscilloscope Mainframe Yes No with 3+E9 Slots and a bandwidth of 200 MHz

1

Delta Omega Sarl 06/12/2010 2/7 Lab Equipment List Tektronix 7D01 Logic Analyzer Logic Analyser with DF1 Display Formatter Yes Yes Plug-In

1

Tektronix 7L13 Spectrum Designed for use in the Tek 7000-Series Mainframes, the Yes Yes Analyzer Plug-In 7L13 represents very high performance : RF (1MHz to in an instrument of this frequency range and price. In 1.2GHz) addition to incorporating the standard features of the 7L12, it also has CRT readout of the center frequency, and an UNCAL light to indicate incorrect settings of the sweep rate or resolution controls. The FM stability is 10 Hz, making 30 Hz resolution possible across the entire frequency range of 1 kHz to 1.8 GHz. Resolution bandwidth selections from 30 1 Hz to 3 MHz. Automatic phase locking permits a stability within 2 kHz, after warm-up, over a one hour period. Specifications and features include fully calibrated displays with 70 dB on-screen dynamic range, IM distortion of 70 dB below full screen, spurious free operation, and -128 dBm sensitivity.

Tektronix 7A18 Dual trace The 7A18 Dual-Trace Plug-In Amplifier is the basic building Yes Yes Amplifier block of 3-trace and 4-trace operation. The unit features constant bandwidth for all deflection factors, 5 operating modes (Ch1, Ch2, ALT, CHOP, ADD), trigger source selectivity and color-keyed control grouping. • Bandwidth: 2 DC to 75MHz • Trace Identify Function • Polarity of Channel 2 is selectable • Deflection Factor: 5 mV/div to 5 V/div • Input R and C: 1 Mohm within 2%; approx. 20 pF

Tektronix 7A19 Amplifier The 7A19 High Bandwidth Plug-In Amplifier has a maximum Yes Yes bandwidth of 600MHz and calibrated deflection factors of 10 mV to 1 V/div with an accuracy of ±3%. 50-ohm input impedance and normal or inverted display. • Option 04 = Variable Delay Line 3

Tektronix 7A22 Differential The 7A22 Differential Amplifier Plug-In has a bandwidth Yes Yes Amplifier from DC to 1MHz with calibrated ranges from 10 µV to 10 V/div. Other features include selectable upper and lower -3 dB points, 100,000:1 CMRR, and adjustable DC offset control. 2

Tektronix 7A26 Dual trace The 7A26 Amplifier Plug-In is one of the most popular plug- Yes Yes Amplifier ins used today for the 7000-Series Oscilloscope Mainframes. This dual trace plug-in offers 5 operating modes, trigger-source selectability, and trace identify. Vertical sensitivity of 5 mV/div to 5 V/div and with 5 appropriate mainframe, DC to 200MHz bandwidth is maintained constant over the entire range. Other features include a 20MHz bandwidth limit switch which reduces noise in lower-frequency applications.

Tektronix 7B53A Dual Time Base Easy-to-use 7B53A Dual Time Base Plug-in, compatible Yes Yes with 7000-Series mainframes. This time base will trigger to 100MHz and has normal, intensified delaying, delayed, and mixed sweep modes. Delaying sweep speeds are 50 ns to 5 s/div in 25 steps (calibrated) and at least 2.5 times the calibrated sweep rate, continuously variable between steps (uncalibrated). Other very useful functions are X10 MAG, 2 INT. and EXT. (main & delayed) trigger inputs, single sweep, front-panel Cal and fine/coarse position controls. The unit is recommended for use with 7313 and 7600- Mainframes.

Tektronix 7B85 Dual Time Base The 7B85 Delta Delaying Time Base Plug-In is Yes Yes recommended for use with 7700, 7800, and 7900 Mainframes to provide optimum bandwidth / sweep-speed compatibility, but may also be used in any slower 7000- Series Mainframe. • Delta Time Measurements with CRT Readout • Delay Time Measurements with CRT Readout • 1 Vertical Trace Separation between Two Delayed Sweeps • Calibrated Time Base: 1 ns to 5 s/div with 1.5% accuracy (50 ns to 0.5 s/div) • Triggering to 400MHz • Variable Trigger Holdoff • Peak-to-peak Auto Triggering

Delta Omega Sarl 06/12/2010 3/7 Lab Equipment List Tektronix 7B92A Dual Time Base The 7B92 Dual Time Base Plug-In is designed for use in the Yes Yes 7000-Series , providing Delaying, Dual Time Base functions. Sweep rates available are from 500 ps to 2 s/div with selectable coupling of AC, AC LF Reject, AC HF Reject, and DC. The 7B92 offers four display modes: normal, intensified delaying sweep, delayed sweep, and 2 alternate. Other features include Int/Ext/Ext ÷ 10/Line triggering capabilities (main and delay external triggering), variable time/division, trace separation control, plus much more.

Tektronix 7B10 Time Base The 7B10 Time Base Plug-In is a horizontal time base Yes Yes designed for use with the 7100-Series mainframes to provide optimum bandwidth/sweep speed compatibility, but may also be used with the 7800 and 7900-Series mainframes. • 0.2 ns to 0.2 s/div calibrated • Triggering to 1 1GHz • Peak-to-peak Auto Triggering

Marconi Adret 103A Voltage/Current Marconi / Adret 103A source continu 1µ V-100V 1nA- Yes Yes Reference 110mA IEEE affichage numérique des consignes 1

Protek 506 Digital The 506 Handheld Digital is a 3 3/4-digit, 4000 Yes No Multimeter count, dual display meter for frequency, AC voltage & temperature measurements. • 10MHz • True RMS AC voltage (to 750V) and current (to 20A) readings • DC Volts to 1000V and DC current to 20A. • RS- 232 interface and software for downloading measurements to a PC • Decibel mesaurement • Analog Bargraph • 10 memory locations • Time and stop watch mode with Alarm • Min., Max., Avg and Relative mode • Capacitance and 1 Inductance measurement • Temperature measurement in Centigrade and Fahrenheit • Pulse generator output • Continuity and Diode test • Logic probe • Auto power off and "keep on" modes • Fused 20A input with warning beeper • Back light • Data hold and run mode • Low battery indicator • All functions have annunciators • Overload protection for all functions • Designed in compliance with UL1244 and VDE-0411

HP 59307A VHF Switch The 59307A Dual VHF Switch provides two single pole 4- Yes Yes throw switches controlled from either the front-panel push buttons or remotely via the HP-IB interface. Covers from DC to 500MHz, this 50-ohms switch is designed to maintain fast 4 pulse transition times. The switches are independent and bi- directional for optimum use in multiplexing 50-ohms signal lines into measuring instruments.

HP 59301A ASCII to Parallel The 59301A ASCII-To-Parallel Converter is a very useful Yes Yes Converter instrument, it allows units which are controlled via BCD input to be operated using the HP-IB. It does this by accepting byte-serial ASCII characters from HP-IB and 2 converts them to parallel output. The 59301A can be used to control other functions using its hexadecimal format.

OLYMPUS StereZoo Binocular Olympus Binocular Stereo Zoom Microscope with 10X No No m Olympus Eyepieces, an Olympus SZ Focus Mount, and a 2X Auxiliary Objective included.

1

PULNIX CV-340E CCD Video Auto IRIS output port, Video output port, operation No No Module voltage: 12V DC.

1

HITACHI VM- VIDEO 10" B & W Monitor 220V No No 900E/K MONITOR

1

Bird 43 RF Wattmeter 50Ohms ; With Heads: 5C = 100-250MHz Yes No 5W / 50A = 25-60MHz 50W / 100A= 25-60MHz 100W

1

Weller VP801EC Soldering station Soldering / Unsoldering station No No

1

Delta Omega Sarl 06/12/2010 4/7 Lab Equipment List Custom design Air/vacuum Air/Vacuum system for instruments calibration

1

HP 1124A Probe DC TO 100 MHZ ACTIVE FET PROBE X10 / X100 Yes Yes SELECTABLE FOR 50 OHM INPUT

26

HP 1122A Probe Power Power supply for active probes. Provides power for up to 4 Supply active probes. Includes 4 each 10131B extender cables. 115/230 V switch; 48-440 Hz.

6

Tektronix P6201 Probe TEK P6201, FET Probe, 900 MHz The P6201 FET Probe is Yes Yes an active FET probe with DC to 900MHz bandwidth and unity gain. The probe features: Low input capacitance DC offset AC to DC coupling switch 0.4 ns risetime The 1101A Power Supply may be needed if the equipment does not provide probe power. Retractable Probe Tip 10X Attenuator Head 100X Attenuator Head 1 3 Probe Tips Miniature Probe Tip Adapter 12" Ground Lead Ground Contact Alligator Clip Electrical Insulating Sleeve Ground Contact Insulator Probe Holder Hard Plastic Carrying Case Instruction Sheet

Tektronix P6022 Probe TEK P6022, P6022 Current Probe Yes Yes With a head size of 0.47 in. x 0.25 in. (10 mm x 6 mm, about half the size of the P6021) and a bandwidth of 935 Hz to 120 MHz, the P6022 is ideal for measuring currents in compact, high-performance circuits. Passive termination output is switchable between 1 mA/mV or 10 mA/mV. 1 For 1 M ohm Input With Passive Termination Clip-on Capability, Shielded Probe Heads, Current Probe - Passive termination output is switchable between 1 mA/mV or 10 mA/mV 6 A Peak, For 1 M ohm Inputs, AC only, Split Core

Tektronix 134 Probe Amplifier TEK 134 Current Probe Amplifier Yes Yes

1

DB 1957 Load 50 watt 50 ohm load, VSWR of 1.1 to 1 up to 1 GHz, No No useable to 1.5 GHz. This unit is fitted with an N male connector and measures 1.5 x 2 x 4 inches long 1

Microlab/FXR HZ-A22 Load 50 MHz - 12 GHz adjustable coupler/signal pick-off unit Yes No made by Microlab, model HZ-A22 General Specifications Frequency Range: 50 to 12,000 MHz. -- Insertion Loss: 0.2 dB max. -- Impedance: 50ohm nominal. -- Main Line VSWR: 1.2:1 max. in the couplingrange, shown in graph. 1 -- Power Rating: 500W avg., 5kW peak. -- Standard Connectors: Main Line: male to female Sample Port: BNC (female) standard -- Temperature Range: -55°C to +150°C -- Finish: Silverplate per QQ-S-365

ERTEC ESS32 Emulator EPROM Simulator Debugger Yes No

1

Delta Omega Sarl 06/12/2010 5/7 Lab Equipment List Heraeus Chambre Temp -70°C to +180°C ; RH 10% to 90% Dimensions: Yes Yes Climatique 152 x 117 x 70 cm

1

Prologix GPIB-USB Use this unique device to download data and control GPIB Yes No Controller bus enabled oscilloscopes, logic analyzers, function generators, power supplies, and any other GPIB instrument seamlessly through USB!

1

Sale Logic USB Logic Powerful logic analyzer in a very small anodized aluminum Yes No Analyzer package. Simplistic, sleek design with light-weight software and a high-quality finish. With USB connectivity, analyze up to 8 digital waveforms and timing information on I2C, SPI, serial, and digital IO lines with ease.Works with signals 5V or lower! 1

USB endoscope The USB Endoscope is a flexible video endoscope with a Yes No USB interface for connection to a computer, waterproof camera head, bright LED lights and easy one-handed operation to allow visual inspection of hard-to-access places with the ability to view, capture and store both video and still images. Lens 14mmØ, F#2.8, 54°angle of view 1 Focal Distance 60mm to infinity Camera 300K Resolution 640 x 480 pixels Picture Rate Up to 30fps VGA

USB microscope The USB Digital Microscope is a fully functional Yes No magnification device which is extremely easy to use. By just plugging directly into your computer you can view objects magnified up to 200 times. An adjustable light control wheel, 6 white LED lights, a 2 megapixel digital camera and USB 2.0 interface ensure the Microscope captures high quality images and videos to your PC or laptop Image Sensor 2 Megapixels Video Capture Resolution 1600 x 1200, 1280 x 1024, 640 x 480, 320 x 240 Still Image Capture Resolution 1600 x 1200, 1280 x 1024, 640 x 480, 320 x 240 Colour 24bit RGB Lens Dual Axis 27X & 100X Microscope Lens 1 Focus Range Manual Focus from 10mm to infinity Flicker Frequency 50Hz/60Hz Frame Rate Max 30f/s under 600 Lux brightness Magnification Ratio 10X to 200X Shutter Speed 1 sec to 1/1000 sec Video Format AVI format White Balance Auto Exposure Auto Light Source 6 LED white lights (adjustable light intensity) PC Interface Mini USB 2.0 with 1.2m cable Operating System Windows 2000/XP/Vista Power supply 5V DC from USB port Size 110mm x 33mm Ø

Digital Hanging • Capacity of 10kg Yes No Scale • Measures Kg/lb & oz • Easy-to-use push button operation • Max weight from previous reading on Power On • Tare function • LCD display 1 • Auto power off after 50 secs • Low battery indication

Delta Omega Sarl 06/12/2010 6/7 Lab Equipment List ATMEL STK500 Dev Kit The Atmel AVR® STK500 is a starter kit and development Yes No system for Atmel's AVR Flash microcontrollers. The STK500 gives designers a quick start to develop code on the AVR combined with features for using the starter kit to develop prototypes and test new designs. The STK500 interfaces with AVR Studio®, Atmel's Integrated 1 Development Environment (IDE) for code writing and debugging. Expansion cards are available for the different AVR sub-families and larger devices.

ATMEL DVK90CA Dev Kit This development kit is dedicated to the AT90CAN128 AVR Yes No N1 microcontrollers. The board is designed to allow an easy evaluation of the product using demonstration software. To complement the evaluation and enable additional development capability, the DVK90CAN1 board can be plugged into the Atmel STK500 Starter Kit Board in order to use the AT90CAN128 with advanced features as variable VCC, variable VRef, variable XTAL, ..., and supports all 1 AVR development tools. To increase its demonstrative capabilities, this stand alone board has numerous serial interfaces (dual RS232, CAN, LIN, SPI & TWI) and on-board resources (keyboard, LEDs, voltage reading, light and temperature sensors, and speaker).

OLIMEX AT90CAN Development •MCU: AT90CAN128 - 128Kb Flash, 4Kb EEPROM, 4Kb Yes No 128 Board for SRAM, 53 GPIO, 32 working registers, a CAN controller, AT90CAN128 - Real Time CLock, four Timer/Counters with PWM, 2 AVR-CAN UARTs, Two-wire Serial Interface, an 8-chanel 10-bit ADC, Watchdog Timer, SPI serial port, JTAG interface, five selectable power saving modes •5x2 pin JTAG connector for programming and debugging with AVR-JTAG-L or AVR-JTAG-USB •RS232 DB9 female connector and driver •CAN connector and interface 1 •User button •Status LED •16MHz oscillator circuit •32.768kHz oscillator circuit •Reset button and circuit •On board voltage regulator (+5V) •Power supply LED •Power supply connector •Extension pin headers for each uC pin

OLIMEX AVR- AVR In Circuit AVR-USB-JTAG has all the power of the original AVR- Yes No JTAG- Emulator with JTAG plus the flexibility of a USB interface. This is a low- USB USB Interface priced equivalent of the much more expensive JTAGICE, with a handy and safe optically isolated USB interface. Use it to debug and emulate many of the Atmel processors! This unit has a female USB 'B' connector on it which means you will need a USB A to B Male/Male cable to connect it to a computer 1

Texas C5505 eZDSP USB The TMDX5505eZDSP is a small form factor, very low cost Yes No Instruments Stick USB-powered DSP development tool which includes all the Development hardware and software needed to evaluate the industry's Tool lowest power 16-bit DSP: TMS320VC5504 and TMS320VC5505. The USB port provides enough power to operate the ultra-low-power C5505 so no external power supply is required. This ultra low cost tool allows quick and easy evaluation of the advanced capabilities of the C5505 1 and C5504 processors. This tool has embedded XDS510 emulator for full source level debug capability and supports Code Composer Studio™ Rev. 4.0 integrated development environment (IDE) and eXpressDSP™ software which includes the DSP/BIOSv kernel.

Delta Omega Sarl 06/12/2010 7/7