Publications in International Conferences Academic Year 2019-20

Publications in International Conferences

Academic Year 2019-20

1. R. Damodaram, S. Cyril Joseph Daniel and S.C. Amith, Characteristics of Friction surfaced Alloy 718 Coatings, International Conference on Advanced Materials and processes for Defence Applications (ADMAT 2019), Hyderabad, 23-25 September 2019 2. G Selvakumar, Balasubramanian V, Lenin N, Siva Kumar M , An Analysis on Process Control of Wire Electrical Discharge Machining of Aluminium (LM25)/ Fly ash/ B4C Hybrid Composites, 1st International Conference On Recent Trends In Clean Technologies For Sustainable Environment (CTSE 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 26-27 Sep 2019 3. D.Ananthapadmanaban, E.Ravikumar, Taguchi Analysis of friction welding parameters while welding Aluminium to Copper and Aluminium-Copper with Nickel interlayer, 11th International Conference on Precision,Meso,Micro and Nano Engineering (COPEN 2019),I.I.T,Indore, 11-14 December, 2019 4. Anand Ronald B, Dhineshkanna. S, Dhinesh Kumar. G. N, Dinakaran. S, Evaluation of Surface Finish of Al 6061 and SS 304 pipes finished using Magnetic Abrasive Finishing, 11th International Conference on Precision,Meso,Micro and Nano Engineering (COPEN 2019), I.I.T,Indore, 11-14 December, 2019 5. Arun Prakash C, Pranav Shankar, Vimaleswar Babureddy, Sakthi Vigneshwaran S C, Design and Analysis of Pick and Place Robot for Colour Based Sorting Applications, International Conference on Design, Materials and Manufacture, NITK Surathkal, Dec 6-8, 2019 6. K.Rajkumar, M.Manojkumar, K.Ramraji, Investigation on interleaving effect of CaCO3 particulates in sequential layered basalt polymeric laminates, 1st International Conference On Recent Trends In Clean Technologies For Sustainable Environment (CTSE 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 26-27 Sep 2019 7. D.Ananthapadmanaban, K.B.Hrithik, Analysis of friction welding parameter while welding Aluminium AA 2014 and 6082 T6 joints, 1st International Conference On Recent Trends In Clean Technologies For Sustainable Environment (CTSE 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 26-27 Sep 2019 8. D.Ananthapadmanaban, Arun Vasantha Geethan.Arthur Jebastian, Intermetallic formation and Charcterization of Sn-Cu-Mn-Ag lead free solders, 8th Global Conference on Materials Science and Engineering CMSE, Sanya, China, 12-13 November, 2019 9. Arun Prakash C, Sakthi Vigneshwaran SC, Design, Analysis and Fabrication of Semi- Automatic Trash Masher, International Conference on Innovative Technologies in Mechanical Engineering, KIET Group of Institutions, Oct 18-19, 2019

10. R.Vimal Samsingh, , Experimental Investigation on the Mechanical and stealth behaviour of CNT based polymer Composites , Second International Conference on recent trends in Metallurgy, Materials and Manufacturing (IMME19), NIT, Trichy December 27-28, 2019. 11. Dr.S.Suresh Kumar , Numerical and Experimental Ballistic Performance of Aluminium Metal Foam targets, Advanced Materials and Processes for Defence Applications (ADMAT 2019) - Hyderabad, Sept - 23 – 25, 2019

Academic Year 2018-19

1. K. Jayakumar, WEDM Studies On TiB2-15% SiC Ceramic Composite Processed through SPS Process, International Conference : AIMTDR 2018-All India Manufacturing Technology, Design and Research Conference, Anna University, 13-15, Dec 2018 2. Rajeswari, R and M.S.Shunmugam, Effect of powder mix and ultrasonic assistance on pulse train based specific energy in EDM of D3 steel, International Conference : AIMTDR 2018-All India Manufacturing Technology, Design and Research Conference, Anna University, 13-15, Dec 2018 3. Rajkumar K, Rajesh M, Gnanavelbabu A, Nambiraj K.M, The Role Of Hbn Solid Lubricant Reducing Cutting Forces Of Dry Machined Al-B4C Composite, International Conference : AIMTDR 2018-All India Manufacturing Technology, Design and Research Conference, Anna University, 13-15, Dec 2018 4. Ram Prakash S, Rajkumar K, Selvakumar G, Pulse And Work Revolution Parameters Of Wire Cut Electrical Discharge Turning On Ti-6Al-4V Alloy, International Conference : AIMTDR 2018-All India Manufacturing Technology, Design and Research Conference, Anna University, 13-15, Dec 2018 5. Rajkumar K, Rajesh M, Gnanavelbabu A, Nambiraj K.M, The Role Of Hbn Solid Lubricant Reducing Cutting Forces Of Dry Machined Al-B4C Composite, International Conference : AIMTDR 2018-All India Manufacturing Technology, Design and Research Conference, Anna University, 13-15, Dec 2018 6. K.S.Vijay Sekar, C.Prakash, Influence of Failure model and Friction factor in 3D FEA simulation of Slot Milling of Carbon Fiber Reinforced Polymer Composites, 3rd International Conference on Frontiers of Composite Materials, , , Nov 16-18, 2018 7. Manoranjan K S, Harish Narayanan V, Manoj Kumar, T Ashwin R, Investigation of friction models in the machining of Inconel 625 Super Alloy using FEM, 3rd International conference on Advances in Materials and Manufacturing applications, IConAMMA-2018., Amrita University, Bengaluru, 17-8-2018

8. D.Ananthapadmanaban, K. Arun Vasantha Geethan, S.Vijayananth,D. Arthur Jebastine Sunderraj, Correlation between Mechanical Properties and Microstructure of Fe-Ti-Zn alloys fabricated by Powder Metallurgy, International Conference : AIMTDR 2018-All India Manufacturing Technology, Design and Research Conference, Anna University, 13-15, Dec 2018 9. D.Elil Raja, S.Vijayan, Impulse Analysis on Integrated Fixture Layout and Optimization Using Simulated Annealing, International conference on Mathematical methods modeling and simulation in chemical sciences., SSNCE, Dec 6-8 2018 10. S.Vijayan, S.Prasath, Multi response optimization of FSW process parameters on disimilar magnesium alloys AZ 31 and ZM 21 using taguchi based grey relation analysis, International conference on Mathematical methods modeling and simulation in chemical sciences., SSNCE, dec 6-8 2018 11. Pranav Shankar.S, G. Satheesh Kumar, VimaleswarBabureddy, Trajectory Planning of Fingers in 4 DOF Biomimetic Hand using SMA Spring as Actuator, International conference on Advancements in Automation, Robotics and Sensing (ICAARS 2018),, PSG College of Technology, 13th-15th December, 2018 12. PonVigneshPappu, Ajin M and Satheesh Kumar Gopal, Development of Prototype Variable Geometry in-Pipe Robot for Reconfigurable Applications, All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018),, Anna University, 13th-15th December, 2018 13. Pranav Shankar.S, Pranav Moorty, Suhail Khan, I.A.Palani, Satheesh Kumar. G, Development of Shape Memory Alloy (NiTi) driven Biomimetic Hand for In-pipe Applications, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, Shillong, 8th – 10th November, 2018 14. P. Sabarinathan, V.E. Annamalai, K.Rajkumar, Dynamic and thermal analysis of electrical insulator waste reinforced thermoset polymer composite, 8th International Conference on Sustainable Waste Management, Swachh Andhra Corporation, Govt of Andhra Pradesh, International Society of Waste Management, Air and Water (ISWMAW), Acharya Nagarjuna University, Guntur, AP, India November 22 – 24, 2018 15. P. Sabarinathan, V.E. Annamalai, On the use of grains recovered from spent vitrified wheels in coated abrasive discs, 8th International Conference on Sustainable Waste Management, Swachh Andhra Corporation, Govt of Andhra Pradesh, International Society of Waste Management, Air and Water (ISWMAW), Acharya Nagarjuna University, Guntur, AP, India November 22 – 24, 2018 16. R. Damodaram, Cyril Joseph Daniel and Amith, Repair of alloy 718 components using friction surfacing, International Conference on Mechanical Engineering Design (ICMECHD-2019), SSN College of Engineering,25-26 April, 2019.

17. R. Damodaram, Devinder Yadav, Microstructures and Properties of friction surfaced Alloy 718 Coatings, Second International Conference on Sustainable Energy Resources, Materials and Technology (ISERMAT-2019) 18. G Selvakumar, S. Ram Prakash and E. Caleb Kovilpillai , Machining of ZE41 magnesium alloy in WEDM using Taguchi approach, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 19. K.S.Vijay Sekar, K. Gobivel, G. Prabhakaran, R. Sugin Elankavi, Experimental Investigations on Orthogonal Turning of Inconel 718 withTiAlN Coated Tool , Second International Conference on Sustainable Energy Resources, Materials and Technologies. (ISERAMT) 2019. SSNCE, 14.03.2019 20. K.S.Vijay Sekar, Praveen Jerish ,Rakesh kumar Ramakrishnan R, Design &Analysis of a Novel Hybrid Carbumper Using Non-Newtonian Fluid And High Density Polyethylene, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 21. K.S.Vijay Sekar, C Prakash, Impact of failure model and friction factor in 3D FEA simulation of slot milling of carbon fiber reinforced polymer composites, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 22. Dr.L.Poovazhagan, Earnest Beni and Amith S.C, Wire Cut Electric Discharge Machining on Nickel Aluminium Bronze Using Brass Wire Electrode, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 23. Dr. L.Poovazhagan, SankaraManikandan N, Prem Ananth M, ,Sudarsan B and Vishnuvarthan A, Friction and Wear Study of Laser Surface Textured Ti-6Al-4V against Cast Iron and Stainless Steel using Pin-on Disc Tribometer, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 24. Dr. K. Jayakumar, M Harshal, T Jayakumar, KA koundinya, G Gopinath., Optimization of process parameters for EDM of Inconel alloy 625, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 25. Dr. K. Jayakumar, Quality assessment studies on AA7075 plate in rolling process, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 26. Dr. K. Jayakumar, Comparative study of ball nose and flat end milling processes on A356 alloy/SiCp metal matrix composite, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019

27. Selvaraj M, Vivek D, Praveen R,, Sanjay Krishnan A,Y.K. Sabapathya, D. Ebenezerb, Study of GFRP conical springs, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 28. Selvaraj M, Metro M M, Influence of nano particles in basalt/epoxy composites, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 29. Selvaraj M, Vishal D, Development and analysis of vibration and tensile characteristics of multilayer composites, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 30. Selvaraj M, Optimum Parameters for Friction Stir Welding of an Aluminium Alloy, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 31. Selvaraj M, Suresh Kumar S and Ankit Kumar, Development and Performance study of Light Weight Magnesium (AZ31B) and Aluminium (AL 6061) Plates, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 32. Selvaraj M, Rajkumar K, Effect of hexagonal boron nitride filler on vibration behavior of glass-natural fiber polymer composite, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 33. Satheesh Kumar Gopal, Arun. D, In-pipe robot mechanisms – State of the art review, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 34. Satheesh Kumar Gopal, S Aravind, Subramanian R, Shashank K B, Ronak R M, Steve M R, Aditya B, Sriram M, Shri Hari K J, Nikhil J R, Literature survey on Four Legged Robots, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 35. K.Rajkumar, M. Dhananchezian, S.Aravindan, A feasibility study on microwave joining of GFRP composite pipes with interlayer coupling agents, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 36. K.Rajkumar, Kaythry , Madhan , Study of statistical distribution and morphology of particles in a polymer matrix by Foldscope imaging technique, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 37. D.Ananthapadmanaban, Arun Vasantha Geethan.Arthur Jebastian,Rahul Kumar, Challenges during manufacture and use of lead free alloys, Second International Conference on

Sustainable Energy Resources, Materials and Technologies. (ISERAMT) 2019. SSNCE, 14.03.2019 38. D.Ananthapadmanaban, Arun Vasntha Geethan, Arthur Jebastian,T.Vigraman, Manufacture ,Mechanical Testing And Characterization Of Aluminium Matrix Composite Reinforced With Iron, International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 39. D.Ananthapadmanaban, Rahul Kumar, Six hat thinking as applied to Electrical Vehicles, ICMECh'19,International Conference in Materials Engineering and Characterization, 8-10 May 2019, Adhi College of Engineering & Technology, Kanchipuram-631 605. 40. Arun Prakash C, Sankgeeth VS , Shami Jose, Anand Ronald B, Effect of Input Velocity on the Output of Vertical Axis Wind Turbine (VAWT), International Conference on Mechanical Engineering Design (ICMechD 2019), Sri Sivasubramaniya Nadar (SSN) College of Engineering, Chennai, 25-26 April 2019 41. M. Dhananchezian, , Investigation on the use of multiple liquid nitrogen jets in cryogenic machining of Ti-6Al-4V, Second International Conference on Sustainable Energy Resources, Materials and Technologies. (ISERAMT) 2019. SSNCE, 14.03.2019 42. S. Suresh Kumar, Numerical and Experimental Ballistic Performance Determination of Layered Aluminium Targets, International Conference on Applied Mechanics and Optimization (ICAMeO 2019) - Trivandrum, 13 -15 June 2019 43. Dr. N. Lakshmi Narasimhan, A unit cell Analysis of a Lithium-Ion Battery Cooled by a Phase Change Material Immersed in Dielectric Liquid, International Conference on Smart City Model 2019 (ICSCM 2019), Jan 20-21, 2019 at IIT Madras 44. Dr. B. Anand Ronald, , Development of a modified magnetic moulding set up for improved heat transfer, International Conference on Mechanical Engineering Design (IcMechD 2019), SSNCE 45. Dr. B. Anand Ronald, , Preliminary studies on Sustainable Joining of Polypropylene, First International Conference on Recent Trends in “Clean Technologies for Sustainable Environment” (CTSE-2019), SSNCE 46. KL. Harikrishna, , Experimental studies of PEO process on Corrosion behavior of GTA, Laser and Friction stir welded ZM21 magnesium alloy, Second International Conference on Sustainable Energy Resources, Materials and Technologies. (ISERAMT) 2019. SSNCE, 14.03.2019 47. KL. Harikrishna, A Muniappan, G S Surya, C. Thiyagarajan, Experimental investigation & modelling of drilling process parameters for surface roughness and MRR of Al6063 / SiC/Gr Hybrid composite using RSM, Second International Conference on Sustainable Energy Resources, Materials and Technologies. (ISERAMT) 2019. SSNCE, 14.03.2019 48. KL. Harikrishna, Vashist Valsaraj, CT. Alagappan, Design and Development of Hexapod for an inaccessible environment, Second International Conference on Sustainable Energy Resources, Materials and Technologies. (ISERAMT) 2019. SSNCE, 14.03.2019

Academic Year 2017-18

1. Sridhar Thiagarajan and Satheesh Kumar Gopal, Machine Learning for Beach Litter Classification, International Conference on Machine Intelligence and Signal Processing, IIT Indore, India, December 22-24, 2017 2. Tarun, Shashaank Yogesh, Shanmugavel Kumaran, Surya Raghavan, C. Arun Prakash, Satheesh Kumar Gopal, Vibrational Analysis of Quadcopter, 13th International Conference on Vibration Problems, ICOVP 2017, IIT Guwahati, India, 29th November - 2nd December 2017 3. Sailalitha.G, Karthick.S, G.Satheesh Kumar, I.A.Palani, Landau-Ginzburg-Devonshire Basedmodelling and Iterative Learning Compensation of Phase Transitioning Smart Material Structure for 1 DOF Oscillator Application, , IEEE International conference on Energy, Communication, Data Analytics & Soft Computing (ICECDS) 2017, India,, SKR Engineering College, Chennai, 1st and 2nd August 2017 4. Satheesh Kumar Gopal, Karnik Ram, Harish S., Apeksha Avinash Somalinga & Hanis S, Development and Implementation of Visual Odometry System Using Quadcopter for Inventory Maintenance, E-Proceeding of Artificial Intelligence, Computer Science & Information Technology, KOKUIS, Malaysia, 31st July 2017 & 1st August 2017 5. Sailalitha.G, Akshay Shewatkar, Vishal Jain, Sahil Mittal, Karthick.S, Akash.K, Satheesh Kumar.G, Palani.I.A, Design and Fabrication of Autonomous Carangiform Underwater Fish using Shape Memory Alloy Actuators, Eighth ISSS International Conference on Smart Materials Structures & Systems (ISSS 2017), IISc Bangalore, 5-7 July 2017 6. K. Jayakumar, Abrasive Water Jet Machining studies on Polymer matrix composite, 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2017), Dept. of Mechanical Engg, IIT Madras, Dec 7 to 9, 2017, IIT Madras 7. Mr Jain A R Tony, Dr M S Alphin, Predicting the Hand-Arm Vibration Response Characteristics from the Handles With Coating Using a Lumped Parameter Model Designed, in , International Conference on Vibration, Sound and System Dynamics (ICVSSD 2017), , Vibration Lab, Universiti Sains Malaysia (USM) & Universiti Kuala Lumpur Malaysian Spanish Institute (UniKL MSI) and Tunku Abdul Rahman University College (TARC)., 2nd August 2017, Malaysia 8. Arun Prakash. C, Ponsuganth Elangovan, Nitin Joy, Subramanian R, Numerical Study of Blade Profilesof Vertical Axis Wind Turbine with Bi-Directional Wind Flow in Highway Roads, International Conference on Advances in Energy Research, IIT Bombay, Dec 12-14, 2017 9. S. Arokiasamy, B. Anand Ronald, Influence of Quenching Medium on the Microstructure and Hardness of Magnesium Matrix Hybrid Composites, International Conference on Manufacturing Technology and Simulation (ICMTS 2017), IIT Madras, 7 & 8 July 2017

10. D. Giridhar, B. Anand Ronald, L. Vijayaraghavan, R. Krishnamurthy, Study On Electromagnetic Abrasive Jet Finishing Process, International Conference on Manufacturing Technology and Simulation (ICMTS 2017), IIT Madras, 7 & 8 July 2017 11. C.Arun Prakash, B.Anand Ronald, R.Vijay Sundara Pandian, R. Ramasamy, R. Suraj, Influence Of Mold Material On Heat Transfer During Casting, International Conference on Manufacturing Technology and Simulation (ICMTS 2017), IIT Madras, 7 & 8 July 2017 12. Velayutham K, Venkadeshwaran K and Selvakumar G, Study of dimensional accuracy of laser cutting of square holes on Stainless steel, International Conference on Manufacturing Technology and Simulation (ICMTS-2017), IIT Madras, 7 & 8 July 2017 13. A.Praveen Kumar, M.Nalla mohamed, M.Sathish Kumar, A.Santhosh Kumar, An evaluation of Aluminium-composite combined geometry tubular structures for automotive frontal crash safety applications, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 14. Prakash.C, VijaySekar.K.S, Influence of Friction Coefficient and Failure Model in 3D FEA Simulation of Drilling of Glass Fiber Reinforced Polymer Composites, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 15. Poovazhagan. L, Ruthran. P, Sreyas. S, Thamizharasan. A, Thejas. S, Microstructure Evolution and Mechanical Properties of Al 1050/Al 5083 Laminate Composites Produced by Accumulative Roll Bonding Process, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 16. Poovazhagan. L, Jeffrey Thomas. H, Selvaraj. M, Microstructure and Abrasive Wear Behavior of Copper- Boron Carbide Nanocomposites, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15- 16 February 2018 17. D.Ananthapadmanaban, Amartya Karthik, Development of an expert system to monitor casting defects in foundries, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 18. K. Sekar, M. Manohar, K. Jayakumar, Mechanical and Tribological Properties of A356/Al2O3 /MoS2 Hybrid Composites synthesized through combined stir and squeeze casting, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 19. HariKrishnan PG, K. Jayakumar, Synthesis and characterization of TiB2-SiC ceramic composite produced through spark plasma sintering, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15- 16 February 2018

20. K. Gobivel, K. S. Vijay Sekar G. Prabhakaran, Finite Element Analysis of High Speed Machining of CFRP Material, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 21. G.Velmurugan and K.Babu, Estimation of Inter-laminar Shear Behavior of Polyester Based Wood Dust-Woven Jute Hybrid Composite under Cryogenic Environment, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 22. Tharun, Dharshan, D.Prakash and K.Babu, Analysis and optimization on functionally graded rotating disk using Grey relational method, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15-16 February 2018 23. P. Prabhuraj, S. Rajakumar, A.K. Lakshminarayanan and V. Balasubramanian, Effect of pH value, chloride ion concentration and spraying time on corrosion rate of stir zone of friction stir welded AA7075T-651 joints under salt fog environment, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15-16 February 2018 24. S. Vignesh, P. Dinesh Babu, M. Nalla Mohamed, S. Martin Vinoth, G. Surya, S. Dinesh, Investigation on the process parameters of double-sided friction stir welded AA6082-T6 joints with different tool pins using response surface methodology, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15-16 February 2018 25. D.Arthur Jebastine Sunderraj, D.Ananthapadmanaban, K.Arun Vasantha Geethan, Comparative Hardness Studies and Microstructural Characterization of 87Sn-7Zn-3Al-3In and 87.5Sn-6 Zn-2Al-2.5 in Lead Free Soldering Alloys, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15- 16 February 2018 26. V.Aravind, S. Adharsh, D.Prakash, K.Babu, Stress analysis on functionally graded spur gear, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 27. A.S. Ramana and J. Arun Jacob Packianathan, Experimental Investigation on Heat transfer Analysis of Fins, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 28. Sekkappan C, A. K. Lakshminarayanan, Vashist Valsaraj, Enhancement of properties of pure lead metal via submerged Friction Stir Processing, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15- 16 February 2018 29. T. Geethapriyan, Poovazhagan Lakshmanan, Prakash, M. Mohammed Iqbal, S. Suraj, Influence of Tool Electrodes on machinability of Stainless Steel 420 using Electrochemical

Micro machining process, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 30. Poovazhagan Lakshmanan, Experimental Investigations on Turning of AA6061/B4Cp Metal Matrix Nanocomposites, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 31. K.Rajkumar, L. Poovazhagan, G.Selvakumar, B.Muthukumar, Wire electrical discharge machining integrity studies on the aluminium Nano composite, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 32. Radhika Koganti, A. K. Lakshminarayanan, T.Ramprabhu, Understanding the Effect of Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Processed ZE41 grade Magnesium Alloy, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 33. Meenachi. P, Subashini. R and A. K. Lakshminarayanan, Microstructure and in-vitro corrosion study of AZ31 Magnesium alloy by Friction Stir Processing, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 34. K. Rajkumar, A. Gnanavelbabu, K. M. Nambiraj, Accelerated testing model prediction of fatigue life of AA5083-H111 - AA6061-T6 friction stir weldment, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15-16 February 2018 35. R.Srivasupradha, A.K.Lakshminarayanan,Yashaswinarathi,Yogesha.R, Fabrication and Performance Analysis of Friction Stir Back Extruded Lightweight Magnesium Alloy Heat Pipes, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 36. P. Kaliyappan, M.Dhananchezian, Effect of Polycaprolactam Fiber and Waste Tyre Rubber Particles on Mechanical Properties of Natural Rubber Hybrid Composites, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15-16 February 2018 37. A.K.Lakshminarayanan and S.SureshKumar, Energy absorbing characteristics of AA5052 Aluminium top hat sections welded by friction stir variants, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15-16 February 2018 38. A.K.Lakshminarayanan 1and K.L.Harikrishna, Influence of overlap ratio on the microstructure of friction stir cladded copper-stainless steel joints, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15- 16 February 2018

39. K.Subbaiah, Comparative Evaluation TIG and FS Welding of Cast Al- Mg-Sc alloy, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 40. Arunkumar.D, and K.Subbaiah, Effect of continuous and pulsed current tungsten inert gas welding of cast Al – Mg - Sc alloy, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15-16 February 2018 41. R.Aarthi, and K.Subbaiah, Effect of Al-Si Filler Rods on the Microstructure and Mechanical Properties of TIG Welded Thick AA5083-F Alloys, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15- 16 February 2018 42. Balamurugan.S and K.Subbaiah, Tool Pin Profile Studies on Friction Stir Welded Joints of AA5052-H32 and AA6061-T6 Aluminum Alloys, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), , SSN College of Engineering, 15- 16 February 2018 43. Dhananchezian M, Nethaji P R, Naresh babu N, Ram Goutham G, Suresh K,, The effect of cryogenic cooling using liquid nitrogen on workpiece surface roughness parameters and cutting tool wear when turning Hastelloy C-22, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES),, NIT, Trichy., 18-20 January 2018, 44. Dhananchezian's paper with his PhD scholar, Lakshmanan. S, Investigation of cutting speed aspects on cutting force, tool wear and surface roughness in turning of Ti6Al4V with PVD- AlCrN coated cutting inserts under wet machining, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES),, NIT, Trichy., 18-20 January 2018 45. A. S. Ramana, Hemanthkumar, SureshKumar, Logesh Perumal, Manigandan R, Methun T, Review on performance investigations of solar still, International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), SSN College of Engineering, 15- 16 February 2018 46. Arthur Jebastian, D.Ananthapadmanaban, Arun Vasantha Geethan, Preparation, Hardness studies and Characterization of 88 Sn-7.5Zn-2.5Al-2In and 88 Sn-7.5 Zn-2Al-2.5 In Lead free soldering alloys, International Conference-International Conference on Advances in Mechanical Engineering (ICAME-2018), SRM University, 22-24 March 2018 47. Vimaleshwar Babureddy, Mr R Vimal Samsingh, Dr. S. Esther Florence and Vimaleswar Babureddy., Artificial Intelligence based defect classification for weld joints, International Conference-International Conference on Advances in Mechanical Engineering (ICAME- 2018), SRM University, 22-24 March 2018

48. Dr.Ananthapadmanaban, Dr.Vijayan, Dr.Periasamy, Mr.Raja Velu, Selection of appropriate friction welding parameters while welding Aluminium to Steel”, International Conference International Conference on Automobile, Marine and Mechanical Engineering (ICAMME 2018), SVCE, 4 & 5-5-2018 49. Dr. N. Nallusamy and Mr. Senthamil Selvan , A Review on Combustion, Performance and Emission Characteristics of Reactivity Controlled Compression Ignition (RCCI) Engine, International Conference ICAMME 2018, SVCE, 4 & 5-5-2018 50. Dileep Karnam and Dr. K. Babu, An Experimental Investigation on Turning of AISI 4140 Using Minimum Quantity Lubrication with CNT Nanofluid , International Conference ICAMME 2018, SVCE, 4 & 5-5-2018 51. Dr. K. Babu and R. Arularasan, Quenching Performance of Low Carbon Steel in Graphene Nanofluids , International Conference ICAMME 2018, SVCE, 4 & 5-5-2018 52. Dr. N. Nallusamy, Professor and Mr. Muralidharan , Techniques adopted to improve the productivity of a Solar Still - A Review , International Conference on Desalination (InDA - 2018), National Institute of Technology (NIT), Tiruchirapalli, TN, India,, 20-21-04-2018 53. Praveen Kumar.A, Dr. M. Nalla Mohamed, Investigations on the energy absorption characteristics of hybrid composite wrapped combined geometry tubes for vehicular frontal crash protection"", Second International Conference on Impact loading of Structures and Materials (ICILSM 2018) was held during May 7th -11th 2018 in Xi’an, China., Northwestern Polytechnical University,, 7-11-May 2018" 54. Dr.M. Dhananchezian, Sharan Srinivasan, Suraj Jacob Chandy, Rohan R. Paul, Vinaya Krishna, Saran Prasanth RR,, Beneficial effect of liquid nitrogen cooling on tool wear and surface roughness during turning Nimonic 90 alloy,, International Conference International Conference on Automobile, Marine and Mechanical Engineering (ICAMME 2018), SVCE, 4 & 5-5-2018 55. M. Selvaraj, Prediction of energy efficient weld parameters for FSW of an aluminium alloy, International conference on Automobile, Marine and Mechanical Engineering, SVCE, 4&5 May 2018 56. Arun Prakash C, Anand Ronald B, Karthick S, Aravind S,Vigneshvaraa S.M, Comparison of the surface roughness parameters of a Magnetic Molded Al/SiCP MMC with other conventional methods, International Conference on Frontiers in Engineering, Applied Sciences and Technology. (FEAST’18),, NIT Trichy, April 27th & April 28th, 2018