Intermittent motion Continuous motion Intermittent motion Intermittent motion Intermittent motion STYLE BUTLER4 LIMA NEWTON NEWTON TX ATLA

R R R R R

Pillow

R R R R R

Gusseted

R R R R R

Standard Block Bottom

R R R R R

B. Bottom with corner seal Intermittent motion Continuous motion Intermittent motion Intermittent motion Intermittent motion BAG STYLE BUTLER4 LIMA NEWTON NEWTON TX ATLA

R R R R R

Stand up pouch

T T T R R

SUP Press to close zipper

T T T R R

SUP Slider Zipper

R R R R R

Push Pop Intermittent motion Continuous motion Intermittent motion Intermittent motion Intermittent motion BAG STYLE BUTLER4 LIMA NEWTON NEWTON TX ATLA

T R T T T

Tetrahedron

T T R R R

Multi-bag

T T R T T

Air Deflated Block Bottom

R R R R R

Peg Hole Intermittent motion Continuous motion Intermittent motion Intermittent motion Intermittent motion BAG STYLE BUTLER4 LIMA NEWTON NEWTON TX ATLA

T T R T T

Carry Handle

R R R R R

Top and bottom Tear notch

R R R R R

Side Tear notch

R R R R R

Transverse Press to Close Intermittent motion Continuous motion Intermittent motion Intermittent motion Intermittent motion BAG STYLE BUTLER4 LIMA NEWTON NEWTON TX ATLA

R T R R R

Transverse Slider Zipper

R R R R R

Transverse Zip 360

R R R R R

Pour & Lok®

Series Intermittent Motion Packaging Machine Packaging Solutions and Technology

series

Multi Brand Former Adapter Accepts former sets from all brands Most economic packaging machine Accepts low cost Flexi Former

Split Frame Design Divisible into a packaging sections and unwind section Packaging section separate obtainable Packaging section easy connectable to an UVA-Autosplicer or an UVA-Cornersealer

Green Technology Low CO2 footprint Runs at 4 bar airpressure Low energy sealing jaws Low weight

Compact Design Small footprint and height Allows easy replacement of any packaging machine

World Service Program 24/7 technical support Service contract including maintenance

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

series Machine Design } Hygenic design: “easy to clean” } Easy height configuration due to unique “bridge concept” } Sanitary easy clean

Controls } Machine control by Allen-Bradley } 10” colour touch screen for production information and fault display } 100 production program memory for quick changeovers } Slip compensation for exact bag length } Servo loop controlled machine, reduces wear at high performance

Efficiency Management Machine } Low energy sealing jaws Butler-4-220 Butler-4-320 } Production counter with reset button at control panel Specification } Easy and quick change of sealing jaws and sealing system Technology Intermittent Motion } Program selectable cross jaw opening for maximum output with different bag sizes Bag width 50-220 mm 120-320 mm } Extra inputs for synchronisation Bag width, block bottom 40-160 mm 80-290 mm

Front to back, block bottom 45-110 mm 45-120 mm Ease of Use Bag length 400 mm 480 mm } Temperature controllers with precise, separate control for front, rear and long seal jaws Power consumption 1,2 kVA Air requirements 4 bar After Sales Service Maximum film roll width 470 mm 680 mm } Low cost on maintenance, uptime guaranteed Maximum film reel diameter (D) 550 mm } Global and service network contract possibilities Core diameter 76 mm

Easy Upgrades Maximum machine output 120 /min.

} Efficiency upgrades Machine weight approximately 650 kg + Dimensions (stand.) HxWxL in mm 1650 x 1350 x 2100

Bag Styles max. Speed + Pillow 120 bpm

Block Bottom 70 bpm

} Flexibility upgrades Gusseted 70 bpm + Ease of Use Easy opening

+ Euro log

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Lima-C Series Continuous Motion Packaging Machine Packaging Solutions and Technology

LIMA-C series

Highest Packaging Speeds All motions by servo technology Pillow bags up to 200 bpm Block bottom bags up to 140 bpm Guaranteed output

Highest Flexibility Seven bag styles on one machine Multiple film types per machine

Highest Quality and Efficiency Design and manufacturing by UVA Packaging All parts and components from A-brands

World Service Program 24/7 technical support Optional service contract including maintenance

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

LIMA-C series Machine Design } Anti-corrosive execution with solid stainless steel housing } Stainless steel frame; height to application } Sanitary, stainless steel, closed housing, low profile machine design } Easy floor clean up due to unique design and concept

Controls } Machine control by Siemens or Allen-Bradley } Colour touch screen for production information and fault display } 200 production program memory for quick changeovers } Servo motors for cross seal unit and film draw off belts Machine } Slip compensation for film transport through film encoder Specification Lima 250 Lima 320 Lima 400 } Continuous motion power film reel unwind motor; controlled by dancer unit Technology Continuous Motion

Bag width 50-250 mm 50-320 mm 50-400 mm

Efficiency Management Bag width, block bottom 40-170 mm 40-270 mm 40-320 mm } Efficiency Statistics monitor with “reason code” interface Front to back, block bottom 30-100 mm 30-130 mm 30-160 mm } Drop time adjustment on screen } Production counter with reset button at control panel Bag length min. 50 mm } Pressure sensor for low air pressure detection with machine stop Power consumption 10/12,5 kVA } Easy and quick change of sealing jaws and sealing system } Program selectable cross jaw opening for maximum output with Air requirements 6 bar different bag sizes Maximum film roll width 840 mm } Optional Integrated Auto Splicer } Vacuum film draw off system with dry vane vacuum pump Maximum film reel diameter (D) 700 mm } Vacuum belts with “gentle” motion film draw off, acceleration / Core diameter 76 mm or 150 mm deceleration of belts } 3 Extra inputs for synchronisation Maximum machine output 200 bags/min. } RTD temperature probes (PT 100) Machine weight approximately 950 kg

Dimensions (stand.) HxWxL in mm 1725x1200x2086 1875x1200x2086 1925x1200x2086 Ease of Use } Hot seal band for long seals Bag Styles max. Speed } Automatic hot seal band retraction by machine stop to avoid heat build up at Pillow 200 bpm } Temperature controllers with precise, separate control for front, rear and long seal Block Bottom 140 bpm } Film reel for easy roll change (expansion shaft), Gusseted 140 bpm Self centering and positioning Corner Crease 120 bpm After Sales Service Corner Seal 100 bpm } Low cost on maintenance, uptime guaranteed Doy-Style 100 bpm } Global and service network contract possibilities Push Pop 100 bpm

Application Options Ease of Use } Machine Heating-Pack for Deep-froozen environment Easy opening } Machine Wet-Pack for extra machine protection in wet enviroment Euro log } Machine Dust-Pack for extra machine protection in dusty environment

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Series Twin Continuous Motion Packaging Machine Packaging Solutions and Technology

LIMA-TWINNER series

Highest Flexibility, Quality and Efficiency Seven bag styles on each machine Two independent operating machines Two film unwinds Multiple film types per machine Designed and manufactured by UVA Packaging standards A-brand components Highest OEE

Benefits Less floor space Lower Capex Reduction in manpower

World Service Program 24/7 technical support Service contract including maintenance

Highest Packaging Speeds Pillow bags up to 400 BPM * (200 per tube) Block Bottom bags up to 280 BPM * Centre line forming tubes at 1080 mm

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

LIMA-TWINNER series Machine Design } Robust stainless steel frame } A-brand components } Single reel per tube } Accessible frames } Modular and ergonomic design } Quick change-over times without tools

Controls } Machine control by Siemens or Allen-Bradley Machine Twin Continous Motion } Large colour touch screens } Servo drives for cross seal, jaw movement and draw off belts Specification 250 320 } Encoder on draw off belts for accurate film transport Bag width pillow 50-250 mm 50-320 mm } Film roll unwind motor Bag width, block bottom 40-170 mm 40-270 mm

Bag depth, block bottom 30-100 mm 30-130 mm

Efficiency Management Bag length min. 50 mm - max. 600 mm } Efficiency Statistics monitor with “reason code” interface Pitch distance filling tubes (P) 1080 mm } Drop time adjustment on screen } Production counter with reset button at control panel Maximum film roll width 700 mm } Low air pressure detection with machine stop Maximum film roll diameter (D) 550 mm } Easy and quick change of sealing jaws and sealing system } Program selectable cross jaw opening for maximum output with Core diameter 76 mm different bag sizes Maximum machine output up to 400 BPM*) } Vacuum film draw off system with dry vane vacuum pump } Vacuum belts with “gentle” motion film draw off, acceleration / Power consumption 20/22 kVA deceleration of belts Air requirements 6 bar } 6 Extra inputs for synchronisation } RTD temperature probes (PT 100) Machine weight approx. 2000 kg 2100 kg

Dimensions (stand.) HxWxL in mm 1600 x 2600 x 2600 mm Ease of Use } Automatic hot seal band retraction by machine stop Bag Styles max. Speed to avoid heat build up at tube Pillow 400 bpm } Temperature controllers with precise, separate control for front, rear and long seal Block Bottom 280 bpm } Film reel for easy roll change (expansion shaft), Self centering and positioning Gusseted 280 bpm Corner Crease 240 bpm

Corner Seal 200 bpm Options Doy-Style 200 bpm } Former change lift (integrated) } Cornerseal unit Push Pop 200 bpm } Gas Flushing } Euroloch } Stripping on sealing jaws Ease of Use } Ceramic sealing jaws Easy opening } Air deflators Euro log } Automatic film track alignment

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Lima-C Monoblock Series Continuous Motion Packaging Machine Packaging Solutions and Technology

LIMA-C Monoblock series

Compact Design Integrated platform Suitable for any dosing system Optimum yield of floor space

Highest Flexibility Seven bag styles on one machine Multiple film types per machine

Highest Packaging Speeds All motions by servo technology Pillow bags up to 200 bpm Block bottom bags up to 140 bpm Guaranteed output

World Service Program 24/7 technical support Optional service contract including maintenance

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

LIMA-C Monoblock series Machine Design Machine } Anti-corrosive execution with solid stainless steel monoblock housing } Easy floor clean up due to unique design and concept Specification Lima 250 Lima 320 Lima 400 } Easy fit for multihead weigher Technology Continuous Motion } Easy fit for auger doser Bag width 50-250 mm 50-320 mm 50-400 mm } Easy fit for cup dosing system Bag width, block bottom 40-170 mm 40-270 mm 40-320 mm Controls Front to back, block bottom 30-100 mm 30-130 mm 30-160 mm } Machine control by Siemens or Allen-Bradley Bag length min. 50 mm } Colour touch screen for production information and fault display Power consumption 10/12,5 kVA } 200 production program memory for quick changeovers } Servo motors for cross seal unit and film draw off belts Air requirements 6 bar

} Slip compensation for film transport through film encoder Maximum film roll width 840 mm } Continuous motion power film reel unwind motor; controlled by dancer unit Maximum film reel diameter (D) 700 mm

Core diameter 76 mm or 150 mm

Efficiency Management Maximum machine output 200 bags/min. } Optional Integrated Auto Splicer Machine weight approximately 950 kg } Efficiency Statistics monitor with “reason code” interface } Drop time adjustment on screen Dimensions (stand.) HxWxL in mm 1725x1200x2086 1875x1200x2086 1925x1200x2086 } Production counter with reset button at control panel } Pressure sensor for low air pressure detection with machine stop } Easy and quick change of sealing jaws and sealing system } Program selectable cross jaw opening for maximum output with different bag sizes Bag Styles max. Speed } Vacuum film draw off system with dry vane vacuum pump Pillow 200 bpm } Vacuum belts with “gentle” motion film draw off, acceleration / deceleration of belts Block Bottom 140 bpm } 3 Extra inputs for synchronisation Gusseted 140 bpm } RTD temperature probes (PT 100) Corner Crease 120 bpm Ease of Use Corner Seal 100 bpm } Hot seal band for long seals Doy-Style 100 bpm } Automatic hot seal band retraction by machine stop Push Pop 100 bpm to avoid heat build up at tube } Temperature controllers with precise, separate control for front, rear and long seal } Film reel for easy roll change (expansion shaft), Self centering and positioning Ease of Use After Sales Service Easy opening } Low cost on maintenance, uptime guaranteed Euro log } Global and service network contract possibilities

Application Options } Machine Heating-Pack for Deep-froozen environment } Machine Wet-Pack for extra machine protection in wet enviroment } Machine Dust-Pack for extra machine protection in dusty environment

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Lima-C Ultrasonic Series Continuous Motion Packaging Machine Packaging Solutions and Technology LIMA-C Ultrasonic series

Highest Packaging Speeds All motions by servo technology Pillow bags in continuous motion Integrated seal check technology

Best Sealing Solution Fresh Salads Liquids Confectionary Cheese Powders

Highest Efficiency No leaking bags, 100% gas tight seals guaranteed Integrated Auto Splicer (optional) Sonic seal film savings up to 10% Lowest energy consumption

World Service Program 24/7 technical support Optional service contract including maintenance Film savings through seal area reduction 30µ capability

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

LIMA-C Ultrasonic series

Machine Design } Anti-corrosive execution with solid stainless steel housing } Stainless steel frame; height to application } Sanitary, stainless steel, closed housing, low profile machine design } Easy floor clean up due to unique design and concept } Ultrasonic sealing technology (cross seal/long seal)

Controls } Machine control by Siemens or Allen-Bradley } Colour touch screen for production information and fault display } 200 production program memory for quick changeovers } Servo motors for cross seal unit and film draw off belts } Slip compensation for film transport through film encoder } Continuous motion power film reel unwind motor; controlled Machine by dancer unit Specification Lima 320 Ultrasonic

Motion Technology Continuous Motion Efficiency Management Sealing Technology Ultrasonic } Efficiency Statistics monitor with “reason code” interface Filmthickness 30µ - 150µ } Drop time adjustment on screen Bag width 50-300 mm } Production counter with reset button at control panel } Pressure sensor for low air pressure detection with machine stop Bag length min. 50 mm } Program selectable cross jaw opening for maximum output with different bag sizes Power consumption 10/12,5 kVA } Optional Integrated Auto Splicer Air requirements 6 bar } Vacuum film draw off system with dry vane vacuum pump Maximum film roll width 630 mm } Vacuum belts with “gentle” motion film draw off, acceleration / deceleration of belts Maximum film reel diameter (D) 700 mm } 3 Extra inputs for synchronisation Core diameter 76 mm or 150 mm

Maximum machine output 200 bags/min.

Ease of Use Machine weight approximately 950 kg

} Automatic hot seal band retraction by machine stop Dimensions (stand.) HxWxL in mm 1875x1200x2086 to avoid heat build up at tube } Film reel for easy roll change (expansion shaft), Self centering and positioning

After Sales Service } Low cost on maintenance, uptime guaranteed } Global and service network contract possibilities

Application Options } Machine Heating-Pack for Deep-froozen environment } Machine Wet-Pack for extra machine protection in wet enviroment } Machine Dust-Pack for extra machine protection in dusty environment

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Newton-I Series Intermittent Motion Packaging Machine Packaging Solutions and Technology NEWTON-I series

Highest Packaging Speeds All motions by servo technology Pillow bags up to 120 bpm 3 Kg & corner seal & air deflation & zip at 50 bpm Guaranteed output

Highest Packaging Flexibility Ten bag styles on one machine Multiple film types per machine

Highest Quality and Efficiency Design and manufacturing by UVA Packaging All parts and components from A-brands

World Service Program 24/7 technical support Optional service contract including maintenance

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

NEWTON-I series D W Machine Design H } Anti-corrosive execution with solid stainless steel housing } Stainless steel frame; height to application L } Easy floor clean up due to unique design and concept Machine Controls Specification Newton 250 Newton 400 } Machine control by Siemens PLC or Allen-Bradley Technology Intermittent Motion } Touch screen for production information and fault display Bag width 50-250 mm 100-400 mm } 200 production program memory for quick changeovers } Servo motors for cross seal unit and film draw off belts Bag width, block bottom 40-170 mm 60-270 mm } Slip compensation for film transport through film encoder Front to back, block bottom 30-100 mm 50-140 mm } Continuous motion power film reel unwind motor; controlled by dancer unit Bag length 400 mm 600 mm Power consumption 10/12,5 kVA Efficiency Management Air requirements 6 bar } Efficiency Statistics monitor with “reason code” interface Maximum film roll width 530 mm 840 mm (XL 1040) } Drop time adjustment on screen Maximum film reel diameter (D) 450 mm or 700 mm } Production counter with reset button at control panel Core diameter 76 mm or 156 mm } Pressure sensor for low air pressure detection with machine stop } Easy and quick change of sealing jaws and sealing system Maximum machine output 120 bags/min. } Program selectable cross jaw opening for maximum output with different bag sizes Machine weight approximately 950 kg } Optional Integrated Auto Splicer Dimensions (stand.) HxWxL in mm 1745x1000x2390 2165x1000x2530 } Vacuum film draw off system with dry vane vacuum pump } Vacuum belts with “gentle” motion film draw off, acceleration / deceleration of belts Bag Styles max. Speed } 3 Extra inputs for synchronisation Pillow 120 bpm

Block Bottom 80 bpm Ease of Use Gusseted 80 bpm } Hot seal band for long seals Corner Crease 80 bpm } Automatic hot seal band retraction by machine stop to avoid heat build up at tube Corner Seal 80 bpm } Temperature controllers with precise, separate control Doy-Style 80 bpm for front, rear and long seal } Film reel for easy roll change (expansion shaft), Push Pop 70 bpm Self centering and positioning Multi-bag 70 bpm

Cone bag 70 bpm After Sales Service } Low cost on maintenance, uptime guaranteed Ease of Use } Global and service network contract possibilities Easy opening

Slider zipper

Application Options P2C zipper

} Machine Heating-Pack for Deep-froozen environment Carry handle } Machine Wet-Pack for extra machine protection in wet enviroment Euro log } Machine Dust-Pack for extra machine protection in dusty environment

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Newton-C Series Continuous Motion Packaging Machine Packaging Solutions and Technology

NEWTON-C series

Highest Packaging Speeds All motions by servo technology Block bottom bags up to 140 bpm Guaranteed output

Highest Flexibility Seven bag styles on one machine Multiple film types per machine

Highest Quality and Efficiency Design and manufacturing by UVA Packaging All parts and components from A-brands

World Service Program 24/7 technical support Optional service contract including maintenance

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

NEWTON-C series Machine Design } Anti-corrosive execution with solid stainless steel housing } Stainless steel frame; height to application } Sanitary, stainless steel, closed housing, low profile D machine design W } Easy floor clean up due to unique design and concept H

Controls L } Machine control by Siemens or Allen-Bradley } Colour touch screen for production information and fault display } 200 production program memory for quick changeovers Machine } Servo motors for cross seal unit and film draw off belts } Slip compensation for film transport through film encoder Specification Newton 250 Newton 320 Newton 400 } Continuous motion power film reel unwind motor; controlled Technology Continuous Motion by dancer unit Bag width 50-250 mm 50-320 mm 50-400 mm Efficiency Management Bag width, block bottom 40-170 mm 40-270 mm 40-320 mm } Efficiency Statistics monitor with “reason code” interface Front to back, block bottom 30-100 mm 30-130 mm 30-160 mm } Drop time adjustment on screen Bag length min. 50 mm } Production counter with reset button at control panel } Pressure sensor for low air pressure detection with machine stop Power consumption 10/12,5 kVA } Easy and quick change of sealing jaws and sealing system Air requirements 6 bar } Program selectable cross jaw opening for maximum output with different bag sizes Maximum film roll width 840 mm } Optional Integrated Auto Splicer Maximum film reel diameter (D) 700 mm } Vacuum film draw off system with dry vane vacuum pump } Vacuum belts with “gentle” motion film draw off, acceleration / Core diameter 76 mm or 150 mm deceleration of belts Maximum machine output 200 bags/min. } 3 Extra inputs for synchronisation } RTD temperature probes (PT 100) Machine weight approximately 950 kg

Dimensions (stand.) HxWxL in mm 1725x1200x2086 1875x1200x2086 1925x1200x2086 Ease of Use } Hot seal band for long seals Bag Styles max. Speed } Automatic hot seal band retraction by machine stop Pillow 200 bpm to avoid heat build up at tube } Temperature controllers with precise, separate control Block Bottom 140 bpm for front, rear and long seal } Film reel for easy roll change (expansion shaft), Gusseted 140 bpm Self centering and positioning Corner Crease 120 bpm

Corner Seal 100 bpm After Sales Service Doy-Style 100 bpm } Low cost on maintenance, uptime guaranteed } Global and service network contract possibilities Push Pop 100 bpm

Application Options Ease of Use } Machine Heating-Pack for Deep-froozen environment Easy opening } Machine Wet-Pack for extra machine protection in wet enviroment Euro log } Machine Dust-Pack for extra machine protection in dusty environment

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Newton-TX Series Intermittent Motion Packaging Machine Packaging Solutions and Technology NEWTON-TX series Economic & Efficient 70% less floor space thanconventional DOY packaging line 30 - 50% lower CAPEX than conventional DOY packing line ZERO losses after machine stops Up to 75 bpm DOY style with zipper

Highest Packaging Flexibility Multiple bagstyle per machine P2C & Slider Zipper Multiple zipper types per machine in one Machine (P2C and Slider Zipper)

World Service Program 24/7 technical support Optional service contract including maintenance

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

NEWTON-TX series Machine Design } Anti-corrosive execution with solid stainless steel housing } Stainless steel frame; height to application D } Sanitary, stainless steel, closed housing, low profile machine design W } Easy floor clean up due to unique design and concept H

Controls L } Machine control by Siemens PLC or Allen-Bradley in Newton NTX } Colour touch screen for production information and fault display } 200 production program memory for quick changeovers } Servo motors for cross seal unit and film draw off belts Machine } Slip compensation for film transport through film encoder Specification Newton TX Newton NTX } Continuous motion power film reel unwind motor; controlled by dancer unit Technology Intermittent Motion Bag width 100-400 mm Efficiency Management Bag width, block bottom 60-270 mm } Efficiency Statistics monitor with “reason code” interface Front to back, block bottom 50-140 mm } Drop time adjustment on screen Bag length 600 mm } Production counter with reset button at control panel } Pressure sensor for low air pressure detection with machine stop Power consumption 10/12,5 kVA } Easy and quick change of sealing jaws and sealing system Air requirements 6 bar } Program selectable cross jaw opening for maximum output with different bag sizes Maximum film roll width 840 mm } Optional Integrated Auto Splicer Maximum film reel diameter (D) 450 mm or 700 mm } Vacuum film draw off system with dry vane vacuum pump } Vacuum belts with “gentle” motion film draw off, acceleration / Core diameter 76 mm or 156 mm deceleration of belts Maximum machine output 100 bags/min. } 3 Extra inputs for synchronisation } RTD temperature probes (PT 100) Machine weight approximately 1350 kg

Dimensions (stand.) HxWxL in mm 2165x1875x3940 2165x3050x2750 Ease of Use } Hot seal band for long seals Bag Styles max. Speed } Automatic hot seal band retraction by machine stop to avoid heat build up at tube Pillow 100 bpm 100 bpm } Temperature controllers with precise, separate control Block Bottom 80 bpm for front, rear and long seal } Film reel for easy roll change (expansion shaft), Gusseted 80 bpm Self centering and positioning Doy-Style 75 bpm 75 bpm

After Sales Service Ease of Use } Low cost on maintenance, uptime guaranteed } Global and service network contract possibilities Easy opening Slider zipper Application Options P2C zipper } Machine Heating-Pack for Deep-froozen environment Carry handle } Machine Wet-Pack for extra machine protection in wet enviroment Euro log } Machine Dust-Pack for extra machine protection in dusty environment

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. UVA-ATLA Series Intermittent motion packaging machine Packaging Solutions and Technology

UVA-ATLA Series

Optimal Hygiene Sanitary design Available in full wash down execution (IP 66 / NEMA 4X) 100 % stainless steel execution available (no aluminium used)

Highest Efficiency & Flexibility Multiple Bag styles Multiple film types A- brand components Multiple zipper types available (slider, press to close/transverse or inline)

Extra specialties Multiple sealing technologies Corner seal technology (on former as well as on film carrier) Automatic splicing technology

Benefits Highest speeds in the market Available for a wide range of products Highest Overall Equipment Effectiveness

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

UVA-ATLA Series Machine Design } Modular design } Sanitary hygienic design } Robust stainless steel frame } Integration of dosing on frame is possible } Pneumatics separated from electronics H } Full wash down version available (IP 66 / NEMA 4X option: no aluminium) } Easy Floor clean up due to design

Controls L } Machine control by Allen-Bradley W } PackML software } Servo motors for cross seal and draw off belts Efficiency Management Machine } Easy and quick change of sealing jaws Specification UVA-ATLA 400 } Optional auto splicer unit } Efficiency statistics monitor with “reason code” interface 0° rotated seal jaws 90° rotated seal jaws } Production counter with reset button at control panel Technology Intermittent Motion } Less waste through high speed centered web guiding Bag width, pillow 50-400 mm

Ease of Use Bag width, block bottom 60-270 mm

} Fully independent temperature control of all jaws Front to back, block bottom 40-180 mm } Film reel for easy roll change, self centering and positioning } Quick change on corner seal Bag length Doy Style 400 mm } Quick 90° rotatable sealing jaws Bag length / cut off length 600 mm Options Standard reel width 840 mm } Corner seal unit (on former as well as continuous) Extended max. reel width 940 mm } Transverse zipper Maximum A-symmetry of film 125 mm } Inline zipper } Fully integrated gas flow control Maximum reel diameter 700 mm } Euroloch, Peg hole Reel core diameter 76 mm or 156 mm } Carry handle } Combi execution (ceramic heatseal) Maximum machine output 125 bags/min. } Printer Machine weight approximately 2600 kg } Punch unit } Labeller Dimensions (stand.) HxWxL in mm 1884 x 1717 x 3026 } UL panels } Automatic splicing technology Bag Styles max. speed Safety Pillow 125 bpm } Lock Out Tag Out option } Safety Performance Level D Block Bottom 85 bpm } Interlocking option on doors Gusseted 85 bpm After Sales Service Doy-Style 75 bpm } Low cost on maintenance, uptime guaranteed Doy-Style with inline zip 65 bpm } Global service network Block Bottom with transverse zip 65 bpm } Full spare parts program } Optional service contract including maintenance Note: Speeds depending on product and film.

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. UVA 600-ST Series Intermittent Motion Packaging Machine Packaging Solutions and Technology

UVA 600-ST series

Large Format Bags Pillow up to 25 kg Bag length up to 790 mm Bag width up to 600 mm

World Service Program 24/7 technical support Service contract including maintenance

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

UVA 600-ST series Machine Design } Easy floor clean up due to unique design and concept } Closed housing, vibration free machine design } Maintenance friendly design with less wear and tear parts } Machine guard in sturdy transparent cover

Controls } Double Servo motor for cross seal Machine } Touch screen for production information and fault display Specification UVA 600-ST } 200 production program memory for quick changeovers } Servo on draw off belt Technology Intermittent Motion } Slip compensation for film transport through film encoder Bag width 200-600 mm } Continuous motion power film reel unwind motor; controlled by dancer unit Bag width, block bottom 140-400 mm Front to back, block bottom 50-200 mm

Bag length 790 mm

Power consumption 15 kVA Efficiency Management Air requirements 6 bar } Efficiency Statistics monitor with “reason code” interface } Drop time adjustment on screen Maximum film roll width 1240 mm } Production counter with reset button at control panel Maximum film reel diameter (D) 685 mm } Pressure sensor for low air pressure detection with machine stop } Program selectable cross jaw opening for maximum output with Core diameter 150 mm different bag sizes Maximum machine output 60 bags/min. } Film reel carrier adjustable for instant web track correction } Film reel limit detector with machine stop before end of reel Machine weight approximately 2000 kg } Electronic temperature control for front, rear and long seal jaws Dimensions (stand.) HxWxL in mm 2620x2180x2365

Bag Styles max. Speed Pillow 60 bpm Ease of Use Block Bottom 45 bpm } Hot seal band for long seals Gusseted 45 bpm } Automatic hot seal band retraction by machine stop to avoid heat build up at tube Corner Crease 45 bpm } Temperature controllers with precise, separate control for front, rear and long seal Multi-bag 45 bpm } Film reel for easy roll change (expansion shaft), Self centering and positioning Ease of Use Easy opening

Slider zipper

After Sales Service P2C zipper

} Low cost on maintenance, uptime guaranteed Carry handle } Global and service network contract possibilities

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Series Stand Alone Auto Splicer Packaging Solutions and Technology

series Creative thinking and cutting edge servo technology resulted in a reliable and userfriendly splicer, with a minimum footprint. Efficient 2-5 % higher line output per packaging line 3-5 % less film waste No downtime

Easy to use Seemless installation Easy splicing procedure Automatic reject of spliced bag capability “trigger” Ergonomic design

Economic Return on investment within 6-12 months “On the fly” splicing

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

series Designed to Improve Your Profits Packing has become an integrated part of the processing industry where continuous efficiency improvements require extremely high performance LOADING from machinery and technology. AREA

In the years to come, the processing steps in a 1400 2000 production environment clearly need to be harmonized and “tuned-in” to each other in order to reach higher performance. In depth understanding of

Pack-O-nomicsprocess integration LOADING possibilities and solutions will AREA become an increasingly important topic in the years to 1400

come. 2000 Rather than “selling” machines UVA Packaging offers packaging solutions and has an integral approach on Machine Specification processing and packaging. Type of splice: Lap splice (taped) Our knowledge on the economics behind the pack- Speed: up to 1.6 m/s aging solution is of great value for our customers. Drive: Servo pinch roler UVA Packaging’s highly trained professionals offer Assist: Vacuum market understanding and are equipped with proven Registering: By eye mark detection

tools that can help our customers to determine Trigger: Trailing edge ‘current’, ‘future’ and ‘latent’ packaging needs in the market. Reel exchange: Cantilever Twin Preparation time: < 1 min. Guaranteed Return On Investment Use: Conventional, non training Weight: 150 kg Highly Trained Professionals Dimensions (WxHxD) mm: 1400 x 1490 x 940 Variable Packaging Solutions Max reel diameter mm: 450 Best Value Proposition Frame: Painted (Steel-it)

Integral Approach Web width mm: 600 (standard execution)

Controls: Siemens

Execution: Left and right

Best Value Proposition Option: Tool cutter/web control

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Series Preliminary Specification

Packaging Solutions and Technology

series Producing Corner Seal bags on ANY existing block bottom bagger.

Retrofits to ANY Bagger Can be placed seamless behind any brand packaging machine Easy upgrade from UVA-BUTLER 4 to a complete bagger

High Speed capability Works with intermittent and continuous motion baggers Handles film speeds up to 500 mm/sec

Instant Shelf differentation 4 corner seal bags on your existing bagger

Easy Upgrade after installation Step 1 existing After installation of the UVA-CORNERSEALER behind an Easy implementation of bagger existing bagger it can run for many years. UVA-CORNERSEALER with excisting baggers from any brand When the bagger needs replacement it can be easily replaced with UVA-BUTLER. The UVA-BUTLER can be deliverd without an unwind section and is therefor extremely price competitive. The UVA-BUTLER can be retro-fittet with UVA-CORNERSEALER in a seamless way. Step 2 Replace your old bagger with half UVA-BUTLER and minimize your investment

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

Machine Specification Film transport speeds: upto 500 mm/sec Designed to Improve Your Profits Film requirements: OPP/PE, PET/ PE, OPP/OPP, OPA/ PE, OPP/PET/PE, PET/alu/PE Packing has become an integrated part of the and other laminates processing industry where continuous efficiency Max. reel diameter (mm 550 improvements require extremely high performance from machinery and technology. Dimensions (HxWxD): 1450 x 1300 x 1100 mm Weight: 400 kg

In the years to come, the Air requirements: min. 4 bar processing steps in a production environment Bag Styles clearly need to be harmonized and “tuned-in” to each other Bag Depth (BD): 45-100 mm Min 60 in order to reach higher Bag Height (BH): max as cross seal jaw (Doy)

performance. Corner Seal width (CS): 5 mm typical

In depth understanding Max. FilmMin Width: 60 680 mm

of process integration Min 60 Pack-O-nomics 45 Min possibilities and solutions will become an increasingly important topic in the years to

come. 45 Min

Rather than “selling” machines UVA Packaging offers 45 Min packaging solutions and has an integral approach on processing and packaging.60 Min Our knowledge on the economics behind the packaging solution is of great value for our customers. Min 60 UVA Packaging’s highly trained professionals offer market understandingMin 45 and are equipped with proven tools that can help our customers to determine ‘current’, ‘future’ and ‘latent’ packaging needs in the market. 45 Min

Guaranteed Return On Investment

Highly Trained Professionals Variable Packaging Solutions Best Value Proposition Integral Approach

Best Value Proposition

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV. Series

Packaging Solutions and Technology

series Versatile in reclosability on ANY existing Retrofits to ANY Bagger bagger. This reclosability in your bag will Seamless installation with any brand give you a market benefit. Intermittent and Continuous Motion Easy upgradable from UVA-BUTLER 4 to a complete system

Extreme ease of use Ergonomic and semantic zip film infeed Simple change over by automatic eye- mark control Color coding for easy and fast replacing of change parts Perfect motorised zip registration Automatic web tracking for perfect positioning

Versatile ZIP media The reclosability you need for your market Central and de-central zip placement Easy upgrades is possible to extend the functionality of the UVA-ZIPSEALER with press to close, slider, Aplix or a combination

Step 1 Easy implementation of Easy Upgrade after installation UVA-ZIPSEALER with excisting baggers from any brand After installation of the UVA-ZIPSEALER behind an existing bagger it can run for many years. existing When the bagger needs replacement it can be easily replaced with bagger UVA-BUTLER. The UVA-BUTLER can be deliverd without an unwind Step 2 section and is therefor extremely price competitive. Replace your old bagger with half The UVA-BUTLER can be retro-fittet with UVA-ZIPSEALER UVA-BUTLER and minimize your in a seamless way. investment

Contact Details Head Office • PMB-UVA International B.V. T +31 (0)40 282 5000 • F +31 (0)40 282 5001 • Meerenakkerweg 32 • 5652 AV Eindhoven • The Netherlands • [email protected] • www.uva-packaging.com Northern American Division • UVA Packaging T +1-804 275 8067 • F +1-804 271 3096 • 8111 Virginia Pine Ct. • Richmond, Virginia 23237 • United States of America • [email protected] • www.pmb-uvainc.com Detailed Machine Specifications

seriesseries Designed to Improve Your Profits Packing has become an integrated part of the processing industry where continuous efficiency improvements require extremely high performance from machinery and technology.

In the years to come, the processing steps in a production environment clearly need to be harmonized and “tuned-in” to each other in order to reach higher performance. In depth understanding Pack-O-nomicsof process integration possibilities and solutions will become an increasingly important topic in the years to come. Rather than “selling” machines UVA Packaging offers packaging solutions and has an integral approach on processing and packaging. Our knowledge on the economics behind the packaging solution is of great value for our customers. UVA Packaging’s highly trained professionals offer market understanding and are equipped with proven tools that can help our customers to determine ‘current’, ‘future’ and ‘latent’ packaging needs in the market. Machine Specification Guaranteed Return On Investment Speed: 60 zippers/min. Weight: 275 kg Highly Trained Professionals Air requirements: 4 bar Variable Packaging Solutions Air consumption with 200 nl/min. clip inserter: Best Value Proposition Air consumption without 75 nl/min. Integral Approach clip inserter:

Power consumption: 4 kVA

Zip length: max. 350 mm

Best Value Proposition Film width: max. 1050 mm

Note: All specification on this leaflet can be subject to change without prior notification from UVA Packaging BV.

VFFS model explanation

The end numbers of each machine model reflects the maximum pillow bag size in millimeters. Larger bags can be produced using a Block Bottom bag style.

The letter after the machine model stands for: - C = Continuous motion - I = Intermittent motion - TT = Twin Tube - TX = Turn table cross seal station - NTX = Non turnable table cross seal station - ST = Servo technology (600ST is intermittent motion)

Bag width Bag length Output Model: min. max. mm max.” max. - BUTLER™4-220I 2” - 8.75” (220) 13.75” 120 - BUTLER™4-320I 2” - 12.5” (320) 23.5” 120 - LIMA 250C 2” - 9.75” (250) 31.5” 200 - LIMA 320C 2” - 12.5” (320) 31.5” 200 - LIMA 400C 2” - 15.75” (400) 31.5” 180 - LIMA 250 Twinner 2” - 9.75” (250) 31.5” 400 - LIMA 320 Twinner 2” - 12.5” (320) 31.5” 400 - LIMA TT 2” - 6” (150) 24” 400 - NEWTON 250I 2” - 9.75” (250) 15.75” 120 - NEWTON 250C 2” - 9.75” (250) 31.5” 200 - NEWTON 400I 4” - 15.75” (400) 23.5” 120 - NEWTON TX 4” - 15.75” (400) 23.5” 100 - ATLA 4” - 15.75” (400) 23.5” 100 - UVA 600ST 8” - 23.5” (600) 31.5” 40

- Stand Alone Splicer 23.5” max. web width 1600 mm/sec - Stand Alone Corner Seal 26.75” max. web width 660 mm/sec

Bag length is stepless adjustable on any UVA Packaging VFFS model.

UVA Packaging for all your flexible packaging needs.

P.O. 550  Chesterfield, VA 23832  804-275-8067  Fax 804-271-3096  E-mail [email protected]

UVA Packaging Vertical Form Fill & Seal Machines

Model Max. output Pillow range Max. web Max. length Bag styles Budgetary Base price

BUTLER™4-220 120 cpm 2” - 8.75” 18.5” 13.75” P/G/BB* $

BUTLER™4-320 120 cpm 2” - 12.5” 33” 23.5” P/G/BB* $

LIMA 250C 200 cpm 2” - 9.75” 20.75” 31.5” P/G/BB/SU/4C* $

LIMA 320C 200 cpm 2” - 12.5” 33” 31.5” P/G/BB/SU/4C* $

LIMA 320 TT 400 cpm 2” - 5” 33” 31.5” Pillow bag only $

LIMA 400C 200 cpm 2” - 15.75” 33” 31.5” P/G/BB/SU/4C* $

NEWTON 250I 120 cpm 2” - 9.75” 21” 15.75” P/G/BB/SU/4C/PTC* $

NEWTON 250C 200 cpm 2” - 9.75” 21” 15.75” P/G/BB/SU/4C/PTC/SZ* $

NEWTON 400I 120 cpm 4” - 15.75” 33” 23.5” P/G/BB//4C/PTC/SZ* $

NEWTON TX 100 (70) cpm 4” - 15.75” 33” 23.5” P/G/BB/SUP/ PTC/SZ* $

ATLA 100 (70) cpm 4” - 15.75” 33” 23.5” P/G/BB/SUP/ PTC/SZ* $

UVA 600ST 40 cpm 8” - 23.5” 55” 31.5” P/G/BB* $

Integrated Auto Film Splicer for non-stop production $

Stand Alone Film Splicer for retrofit to any flexible packaging machine for non-stop production $

Stand Alone Four Corner Seal Unit for added stability on Block bottom/Gable top bags $

Bag Style Description: * P = Pillow, G=Gusseted, BB=Block bottom, SUP= Stand-Up pouch, 4C= four corner bag seal, PTC = Press to close Zipper, SZ = Slider Zipper

Base prices are for heat seal execution. Forming sets and options are application dependent and not included in budgetary base prices. P.O. Box 550  Chesterfield, VA 23832  804-275-8067  Fax 804-271-3096  E-mail [email protected]