Wood Tech Industries, Inc. Catalog 18B

Price List & Product Specification Catalog

1095 EAST GLENBROOK DRIVE • PULASKI, WISCONSIN 54162 PHONE (920) 822-4772 • FAX (920) 822-4336 WWW.WTIDOORS.COM • WWW.WOODTECHINDUSTRIES.COM

Method of Payment We accept cash, check or credit card as payment . Down payment and balance due before pick-up is required for customers without credit approval. An open account is available to approved customers. Terms are net 30 days. Past due accounts are subject to a 2% monthly service charge. Return checks will have a $50.00 service charge. Ordering Ordering can be done by faxing your order to 920-822-4336. To order by phone, call 920-822-4772. Or you can visit our website at www.wtidoors.com or www.woodtechindustries.com. Click on the order form link, fillout your order and click submit. Shipping Shipping is done by our truck within our delivery area. A drop charge is applied to each delivery. The distance determines the drop charge amount. Please contact us to find out what your drop charge would be. Orders are also shipped by Spee-Dee Delivery, Parcel Post, and common carrier. When boxed and shipped Spee-Dee and Parcel Post add an additional 7% ($6.00 minimum) packaging fee to the shipping charges. Common carrier and Spee-Dee LTLs add an additional $15.00 pallet charge to the shipping charges. Calculating Door Costs To find the cost of a door, you must first find the square footage of the door. To do this first round up to the nearest inch. (Example: 12 ¼ X 15 ½ door would be 13 X 16). Then multiply the length X width and divide by 144. Round that answer to the nearest 1/100 of a foot. (Example: 13 X 16 = 208 ÷ 144 = 1.44). Multiply that answer by the wood cost. Now find the style costs located in the charts on the following pages and add this to the wood cost total. This is the cost of the door. Repeat this for each door to find the total cost. An easy to use pricing program is available, see page 2.

STANDARD DOOR SPECIFICATIONS CUSTOM DOOR UP CHARGE • The maximum width is 24”. A 30% up charge is added to any door that falls • The maximum height is 72”. into the following specifications: • To find the minimum width refer to the 1) Wider or higher than the maximum sizes. style chart. 2) Smaller than the minimums. • A center rail is added to all doors over 40” 3) Ordering doors without standards stiles unless specified. This then changes the or rails. door to a different style and will be priced accordingly. Sales Help Brochures and sales flyers are available to you at no cost. These flyers and brochures can be displayed in your showroom or taken to any shows you may attend. Free Samples Up to $500.00 of free samples are available for your showroom. Samples are priced out as a regular order. You then receive a 5% discount on future orders until your samples are reimbursed.

Matching Your Profiles Profiles are always added to our list. Many of our current profiles have come from current customers looking to match their doors. If you would like to purchase doors from Wood Tech and need to match profiles, we will check with our supplier to see if we can match your profile. If we can match it, and it is feasible, we will add it to our line. Stile and Rail Width Options Our standard width for cope and stick doors are 2 ¼”. All other widths will have a 20% up charge. For doors with multiple stile and rail widths, the doors will be considered as a custom door and will have a 30% up charge. Pricing Program We offer an easy to use program for estimating the cost of doors, fronts, and dovetail drawer boxes. The program is designed in Microsoft Excel. The CD comes with a pricing spread sheet and extra backup spread sheets. Cost is $29.50. Glass Doors To calculate the price of a glass frame door, figure the door as a raised panel door. Then multiply that answer by 75% (.75). The price includes the glass retainer. Retainer colors available are brown, black, off-white, and clear. Unless specified you will receive brown retainer. For standard wood mullions add $3.60 per lite. Prairie Style is priced as a 6 lite door. For molded wood mullions add $6.00 per lite. Unless specified you will receive standard lites. Prairie style is only available in standard lites. Finger Pulls A 45º finger pull can be cut on one or more sides at a cost of $1.85 per door. Please note, our edges L, M, U, F, and T are finger pull profiles and there is no extra charge for these profiles. Concealed Hinges Predrilling for concealed hinges are available. Only the 35mm hole for the hinge is drilled, no pilot holes or plug holes are drilled. Cost is $1.95 per door. Maple Bread Boards Bread boards are glued with water resistant glue. Wood cost is $5.95 per square foot plus a style cost of $19.75. Wenge Plugs Round corner plugs can be added to doors. Plugs are made from dark Wenge wood. Both single and double plugged corners are available. Add $5.50 per door. Custom Work Special pieces or projects are priced out on a per order basis. Please contact our customer service for a quote on these items. Solid MDF Doors Solid MDF doors are priced out as a square foot price. There is a 2 square foot minimum for doors. Solid MDF drawer fronts with no inside profile will have a 1 square foot minimum. Doors are available in our style 11 and 81. Square foot price is $6.60.

Cope and Stick Doors STYLE COSTS – DOORS

Group Group Style Numbers Style Numbers Letter Letter A 11 F 412 21, 31, 41, 51, 61, 71, 81, B G 413, 414 212L, 212R, 213L, 213R H 11SP, 11 SPB, 11 LSG C 12, 13 I 11SPG, 11 LSPG 22, 23, 32, 33, 42, 43, 52, 53, D 62, 63, 72, 82 J 11FPB, 11FPG Solid Panel E 24, 34, 44, 54, 64, 74, 84 K 11FPG (¼” MDF Panel)

GROUP A B C D E F G MINIMUM WIDTH 7 ¾ 8 ¾ 8 ¾ 8 ¾ 8 ¾ 13 ½ 13 ½ MINIMUM LENGTH 7 ¾ 9 ¾ 18 18 12 13 ½ 23

STYLE COSTS: Raised Panel Doors $13.70 $15.35 $16.35 $17.85 $16.60 $17.60 $21.60 Flat Panel Doors $9.85 $11.10 $12.35 $13.85 $12.55 $14.10 $17.35 Solid Slab N/A N/A N/A N/A N/A N/A N/A Paint Grade MDF Panel $11.90 $13.35 $14.55 $16.05 $14.80 $15.80 $19.80 Doors

GROUP H I J K MINIMUM WIDTH 6 6 7 ¾ 7 ¾ MINIMUM LENGTH 6 6 7 ¾ 7 ¾

STYLE COSTS: Raised Panel Doors N/A N/A N/A N/A Flat Panel Doors N/A N/A $19.50 $15.00 Solid Slab $17.30 $19.70 N/A N/A

Cope and Stick Doors WOOD COSTS Raised Panels Select woods are available. Add 25% to the total order. Wood Type Cost Wood Type Cost Alder $8.25 Rustic Hard Maple $7.00 Rustic Alder $6.60 Natural Hard Maple Ash $6.50 (Heartwood and Sapwood Mix) $7.00 Yellow Birch $6.95 Soft Maple $7.00 Natural Yellow Birch Natural Soft Maple (Heartwood and Sapwood Mix) $6.55 (Heartwood and Sapwood Mix) $6.65 White Birch $7.45 Red Oak $6.60 Natural White Birch Rustic Red Oak $6.45 (Heartwood and Sapwood Mix) $7.00 Rift Cut Red Oak $8.35 Butternut $6.70 Quarter Sawn Red Oak $8.40 Rustic Butternut $6.70 Paint Grade $6.50 Cherry $8.25 Paint Grade with MDF Panel $6.00 Rustic Cherry $7.80 Knotty Pine $6.40 Hickory $7.20 Clear Pine $8.30 Rustic Hickory $7.20 Poplar $6.60 Hard Maple $7.20 Quarter Sawn White Oak $8.70 Flat Panels (¼” Veneer MDF Panel) Wood Type Veneer Type Wood Cost Alder Plain sliced veneer $7.70 Ash Plain sliced veneer $5.95 Birch Rotary cut with whole piece face veneer $6.50 Natural Birch Rotary cut veneer $6.50 Cherry Plain sliced veneer $7.70 Hickory Plain sliced veneer $6.65 Knotty Pine Plain sliced veneer $6.65 Maple Rotary cut with whole piece face veneer $6.65 MDF Paint Grade ¼ MDF Panel $5.75 MDF Paint Grade ½ MDF Panel (for reverse raised doors) $5.90 Red Oak Rotary cut veneer $6.05 Red Oak Plain sliced veneer $6.45 Rift Cut Red Oak Plain sliced veneer (Rotary cut veneer on back) $8.20 Quarter Sawn Red Oak Plain sliced veneer (Rotary cut veneer on back) $8.20 Quarter Sawn White Oak Plain sliced veneer (Rotary cut veneer on back) $8.25 All other wood species are available in a reverse raised panel to create a flat panel door. The door will then be priced out as a raised panel door. 4

Mitered and Applied Molding Doors STYLE COSTS

GROUP STYLES GROUP STYLES MA M101, M102, M103, M131, M104, M105, M108, M181, M109, M191, M112 MB M201, M202, M203, M231, M204, M205, M208, M281, M209, M291, M212, M501, M502, M503, M531, M504, M505, M508, M581, M509, M591, M512 MC M106, M107, M110, M111, M120, M206, M207, M210, M211, M220, M506, M507, M510, M511, M520 MD M314, M338, M300A, M300B, M300C, S301A, S301B, S301C ME M401, M402, M403, M404, M405, M411, M412, M413 • Groups MC, MD and ME cannot have a center style or rail in door.

GROUP PRICING GROUP MA MB MC MD ME Minimum Width 7 ¾ 7 ¾ 7 ¾ 7 ¾ 9 ¼ Minimum Length 7 ¾ 7 ¾ 7 ¾ 7 ¾ 9 ¼ STYLE COSTS GROUP MA MB MC MD ME Raised Panel Doors $17.20 $18.20 $19.20 $20.70 $19.80 Flat Panel Doors $13.35 $14.35 $15.35 $15.85 $15.95

• Groups MA, MB, MC and MD come with standard 2 ¼” stile and rails. For other custom widths up to 4” add 20% to the order total. Changing the rail width will also change the minimum specifications.

• Group MD also has a linear molding cost, please call for molding cost.

• Mitered drawer fronts (style M111) come with 1 ¾” stile and rails. The minimum length and height is 6 ½”. Mitered fronts with stile and rails to match the doors are available. This would change the minimum measurements.

Mitered and Applied Molding Doors WOOD COSTS

Raised Panels Select woods are available. Add 25% to the total order. Wood Type Cost Wood Type Cost Alder $8.75 Rustic Hard Maple $7.50 Rustic Alder $7.10 Natural Hard Maple Ash $7.00 (Heartwood and Sapwood Mix) $7.50 Yellow Birch $7.45 Soft Maple $7.50 Natural Yellow Birch Natural Soft Maple (Heartwood and Sapwood Mix) $7.05 (Heartwood and Sapwood Mix) $7.15 White Birch $7.95 Red Oak $7.10 Natural White Birch Rustic Red Oak $6.95 (Heartwood and Sapwood Mix) $7.50 Rift Cut Red Oak $8.85 Butternut $7.20 Quarter Sawn Red Oak $8.90 Rustic Butternut $7.20 Paint Grade $7.00 Cherry $8.75 Paint Grade with MDF Panel $6.50 Rustic Cherry $8.30 Knotty Pine $6.90 Hickory $7.70 Clear Pine $8.80 Rustic Hickory $7.70 Poplar $7.10 Hard Maple $7.70 Quarter Sawn White Oak $9.20 Flat Panels (¼” Veneer MDF Panel) Wood Type Veneer Type Wood Cost Alder Plain sliced veneer $8.20 Ash Plain sliced veneer $6.45 Birch Rotary cut with whole piece face veneer $7.00 Natural Birch Rotary cut veneer $7.00 Cherry Plain sliced veneer $8.20 Hickory Plain sliced veneer $7.15 Knotty Pine Plain sliced veneer $7.15 Maple Rotary cut with whole piece face veneer $7.15 MDF Paint Grade ¼ MDF Panel $6.25 MDF Paint Grade ½ MDF Panel (for reverse raised doors) $6.40 Red Oak Rotary cut veneer $6.55 Red Oak Plain sliced veneer $6.95 Rift Cut Red Oak Plain sliced veneer (Rotary cut veneer on back) $8.70 Quarter Sawn Red Oak Plain sliced veneer (Rotary cut veneer on back) $8.70 Quarter Sawn White Oak Plain sliced veneer (Rotary cut veneer on back) $8.75 All other wood species are available in a reverse raised panel to create a flat panel door. The door will then be priced out as a raised panel door. 6

Drawer Pricing Drawer fronts use the same pricing procedure with the below style costs. There is also a ½ (.5) square foot minimum on the wood cost.

Style Cost Style Cost Minimum Minimum Style No. Style Cost Under 6” Over 6” Width Height DFDE N/A $6.00 $7.00 2 ¾” 2 ¾” DFRP N/A $7.10 $8.10 3 ¼” 3 ¼” DFG N/A $10.30 $11.30 3” 3” DFLS N/A $9.30 $10.80 7” 3” 111 $13.60 N/A N/A 7 ¾” 6” 111FP $9.75 N/A N/A 7” 5” 111FPG $12.60 N/A N/A 7” 5” 111FPB $18.55 N/A N/A 7 ¾” 6” M111 $13.70 N/A N/A 7 ¾” 6 ½

Wainscot Panels

To calculate wainscot panels figure it as a door cost using the below style costs: • Panels under 10 square feet –– style cost = $105.00 • Panels 10 - 15 square feet –– style cost = $140.00 • Panels over 15 square feet –– style cost = $205.00 • For wainscot panels over 10 feet long add an extra $170.00 • For arched panels add $7.00 per arch

Dovetail Drawer Boxes Dovetail boxes are priced like our doors, with a wood cost plus a style cost. The formula for pricing is Width + Depth x 2 x Height ÷ 144 x Wood Cost + Style Cost. Any fraction for the width and depth are rounded up to the next inch. Height is actual size. There is a ½ (.5) square foot minimum on wood cost. Price includes assembly, bottoms and sanded ready for finishing. STYLE STYLE COST WOOD COST 100 $14.40 ASH $6.00 101 $16.40 NATURAL BIRCH $5.25 102 $19.15 BUDGET CHERRY $4.90 103 $21.15 CHERRY $9.10 110 $34.40 BROWN SOFT MAPLE $4.85 111 $39.40 SOFT MAPLE $7.95 120 $64.40 OAK $7.15 121 $59.40 POPLAR $5.30 200 $115.00

Maximum height is 14 5/8”. Boxes come standard with ¼” bottoms and are placed ½” up from the bottom of the box. Maximum height of style 200 is 10”. Box sides come 5/8” standard. Boxes are Bottom Choices: Natural Birch, Cherry, Maple, available with 9/16” sides at no additional Oak, White or Almond Melamine. All boxes charge. built in Natural Birch, Budget Cherry or Brown Soft Maple will have natural birch bottoms. Options Bottoms placed ¼” up from the bottom of the box . . NC Notch and bore for under mount slides ...... $1.65 Removable bottoms ...... $1.50 Boxes finished ...... $7.10 ½” Bottoms (available in Birch only) ...... $2.40

Pre-Finished Aspen Price per foot. HEIGHT PRE- FINISHED Drawer Side Material 3” $1.30 4” $1.75 5” $1.95 6” $2.15 7” $2.50 8” $2.90 9” $3.25 10” $3.60 5 ft. to 8 ft. Random Length 8

Refacing Material

1/4” MDF Veneer Sheet Stock Wood Type Full Sheet Precut Sheet Alder $74.00 .05 per sq. in. Ash $58.00 .05 per sq. in. Cherry $74.00 .05 per sq. in. Hard Maple $66.00 .05 per sq. in. Hickory $68.00 .05 per sq. in. Red Oak $46.00 .05 per sq. in. Soft Maple $66.00 .05 per sq. in. White Birch $58.00 .05 per sq. in. Yellow Birch $58.00 .05 per sq. in.

3/32” Solid Wood Veneer Frame Material Price Per Foot 2” 3” 4” Wood Type 72” L 96” L 72” L 96” L 72” L 96” L Adler $1.05 $1.40 $1.30 $1.65 $1.65 $2.15 Ash $0.80 $1.00 $1.05 $1.30 $1.30 $1.65 Cherry $0.80 $1.00 $1.05 $1.30 $1.30 $1.65 Hard Maple $0.80 $1.00 $1.05 $1.30 $1.30 $1.65 Hickory $0.80 $1.00 $1.05 $1.30 $1.30 $1.65 Red Oak $0.80 $1.00 $1.05 $1.30 $1.30 $1.65 Soft Maple $0.80 $1.00 $1.05 $1.30 $1.30 $1.65 White Birch $1.05 $1.40 $1.30 $1.65 $1.65 $2.15 Yellow Birch $0.80 $1.00 $1.05 $1.30 $1.30 $1.65

9 Panel 1 Panel 2

Panel 3 Panel 4

Stile and Rail Profiles The Stile and Rail profile comes with eased edges. With the cutter profile having a slight radius where the panel meets the stile, the stain can work its way under the stile. Thus when movement from panel contraction occurs, it will help to eliminate the unfinished part of the panel from showing as easily as traditional cabinet door cutting.

SR1 SR2 SR4

SR5 SR3 SR31 (Use with raised panels) (Use with flat panels)

SR-8 SR-81 SR-21 45° 45° (Use with flat panels) (Use with flat panels)

SR-9 SR-91 SR-12 SR-12 22.5° 22.5° (Use with flat panels)

SR-820 SR-821 (Use with flat panels)

Edge A Edge B Edge C 3/8” Radius 3/8” Radius Panel Profiles

Edge D Edge E Edge BG

Panel 1 Panel 2

Edge T Panel 1 Edge M Edge B Panel 2

Edge H Panel 3 Edge I Panel 4 Edge

Panel 3 Panel 4

Edge Edge N Panel 5 Reverse Flat Panel Edge T Edge M Edge B Edge T Edge M Edge B

Edge L Flat Panel (MDF Core)

Style DFRP Drawer Front ProfilesEdge G SR1 SR2 SR4

Panel 5 Panel 5 SR1 SR2 SR4 Style 15 Style 1A

Style 11 Style 12 Style 13 SR5 SR3 SR31

SR5 SR3 SR31

Style 15 Style 1A Style 15 Style 16 Style 1A

11 Edge A Edge B Edge C 3/8” Radius 3/8” Radius

Edge D Edge E Edge BG

Edge A Edge B Edge C 3/8” Radius 3/8” Radius

Edge H Edge I Edge Edge A Edge B Edge C Edge A EdgeEdge A A Edge B EdgeEdge B B Edge C EdgeEdge C C 3/8” Radius 3/8” Radius 3/8” Radius 3/8” Radius Edge A EdgeDoor B Edge EdgeProfilesEdge A C Edge B 3/8”3/8” Radius Radius Edge C 3/8”3/8” Radius Radius 3/8” Radius 3/8” Radius 3/8” Radius 3/8” Radius

Edge D Edge E Edge BG Edge Edge N

Edge AEdgeEdge A A Edge BEdgeEdge B B Edge CEdgeEdge C C Edge D Edge E Edge BG Edge D 3/8”Edge RadiusEdge3/8” D 3/8” Radius D Radius Edge E 3/8”Edge RadiusEdge3/8” E 3/8” RadiusE Radius Edge BG EdgeEdge BG BG Edge D Edge E EdgeEdge D BG Edge E Edge BG Edge L

Edge H Edge I Edge

Edge H Edge I Edge Edge G Edge H EdgeEdge H H Edge I EdgeEdge I I Edge EdgeEdge Edge DEdgeEdge D D Edge EEdgeEdge E E Edge BGEdgeEdge BG BG Edge H Edge I Edge HEdge Edge I Edge Edge O Edge AB (1/4” Radius) (3/8” Radius)

Edge Edge N

Edge Edge N Edge HEdgeEdge H H Edge IEdgeEdge I I EdgeEdge Edge Edge Edge Edge Edge N EdgeEdge N N Edge EdgeEdge N TEdge L Edge MEdge Edge N Edge B Style 11 Style 12Edge O Style 13 Edge AB Edge AP Edge P Edge AB (1/4” Radius) (3/8” Radius) (1/4” Radius) (1/4” Radius) (3/8” Radius) Edge L Edge L EdgeEdge L L Edge L Edge L Edge G

Edge EdgeEdge Edge NEdgeEdge N N Edge G SR-Edge5 Edge G SEdgeEdge G G SR-5 Edge AP Edge O Edge P Edge BG EdgeEdge AB ABEdge R Edge G (1/4” Radius) (1/4” Radius) Edge G (1/4” Radius) (3/8”(3/8” Radius) Radius) Edge O Edge AB Edge O Edge AB (1/4” Radius) Edge LEdgeEdge(3/8” L L Radius) (1/4” Radius) (3/8” Radius) Panel 5

Style 11 Style 12 Style 13

Edge GEdgeEdge G G Edge BG Edge R Edge AP SR-5 SR-5 Edge P Edge AB (1/4” Radius) (1/4” Radius) (3/8” Radius) Edge A Edge B Edge C Style 11 Style 12 Style 13 Edge AP Edge TEdge P Edge ABEdge M Edge AP Edge B Edge AT Edge P Edge AB 3/8” Radius 3/8” Radius Style 11 StyleStyle 11 11 Style 12 StyleStyle 12 12 Style 13 StyleStyle 13 13 (1/4” Radius) (1/4” Radius) (3/8” Radius) (1/4” Radius) (1/4” Radius) (3/8” Radius) Style 11 Style 12 Style Style11 13 Style 12 Style 13

Edge BG Edge R SR-5 SR-5

Edge BG Edge R SR-5 SR-5 Edge BG Edge R SR-5 SR-5 Edge D Edge E StyleEdge 11Style BGStyle 11 11 StyleStyle 12Style 15Style 12 12 StyleEdge 13Style V Style 13 13Style 1A Edge U Edge T Edge M Edge B Edge V Edge U M 401

Panel 5 M 402

Edge H Edge I EdgeEdgeEdge BC BC EdgeEdge F F

M 401 12

M 403

Panel 5 M 402

Edge Edge N M 401

Style 15 Style 1A M 401 M 401 M 403 Edge L M 402

M 402 M 402

Edge G

Style 15 M 403Style 1A

M 403 M 403

Style 11 Style 12 Style 13

Mitered Door Profiles M100 Series

M100 series doors come standard with 2 ¼” stile and rails. Other widths are available. Outside profiles on M100 series are found on page 12. When ordering M100 series include outside profile letter in style number (example: M102-A).

M 101 M101 M 102M102

M 103 M 131 M103 M131

MM104 104 M M105105

M108 M181

Mitered Door Profiles M100 Series

M109 M191

M112 M110

M 106 M106 M111

M120 M107

Doors with miter profiles M106, M107, M110, M111 or M120 cannot have a center rail or center stile in door.

Mitered Door Profiles M200 Series

M200 series doors come standard with 2 ¼” stile and rails. Other widths are available.

M201 M202

M203 M231

M204 M205

M208 M281

Mitered Door Profiles M200 Series

M200 series doors come standard with 2 ¼” stile and rails. Other widths are available.

M209 M291

M212 M210

M206 M211

M220 M207

Doors with miter profiles M206, M207, M210, M211 or M220 cannot have a center rail or center stile in door.

Mitered Door Profiles M500 Series

M500 series doors come standard with 2 ¼” stile and rails. Other widths are available.

M501 M502

M503 M531

M504 M505

M508 M581

Mitered Door Profiles M500 Series

M500 series doors come standard with 2 ¼” stile and rails. Other widths are available.

M509 M591

M512 M510

M506 M511

M520 M507

Doors with miter profiles M506, M507, M510, M511 or M520 cannot have a center rail or center stile in door.

18 Edge O Edge AB (1/4” Radius) (3/8” Radius)

Edge O Edge AB (1/4” Radius) (3/8” Radius) Edge AP Edge P Edge AB (1/4” Radius) (1/4” Radius) (3/8” Radius) Edge O Edge AB (1/4” Radius) (3/8” Radius)

Edge AP Edge P Edge AB (1/4” Radius) (1/4” Radius) (3/8” Radius) Edge BG Edge R SR-5 SR-5

Edge AP Edge P Edge AB (1/4” Radius) (1/4” Radius) (3/8” Radius)

Edge BG Edge R SR-5 SR-5 Mitered Door Profiles M400 Series

Edge BG Edge R SR-5 SR-5 M400 series doors cannot have a center stile or rail.

M 3”401 1 3/4” M401 M411

M 402

M 401

MM 3”403401 402 1 3/4” M402 M412

M 402

M 403

M 413 1 3/4” M 3”403 M403 M413

3” 2 5/8” M404 M405 M404 doors come standard with 3” stile and rails. Other widths are available. When ordering M404 doors choose an outside profile on page 12.

Circle Sawn Rustic Doors

Full Circle Sawn Skipped Circle Sawn (Shown in reverse flat panel) (Shown in raised panel)

What to expect with circle sawn doors: These doors are created to mimic old barn board doors. Any dirt marks from the wood drying process are left on the boards. Boards with water stain are used. Some dirt marks and the water stain will not be able to be removed and is considered to be part of the rustic look. Small structurally sound knots may also be present. Glue lines in panels and stile and rail joints may not line up height wise and is considered to be part of the rustic look. Crayon markings are removed or cut out as with large structurally unsound cracks. Wood Tech attempts to remove all glue on doors and fronts.

• Create a barn board look. • Back side sanded flush for a tight cabinet fit. • Available in raised panel or reverse flat panel. • Cabinet stock and random lumber available. • Circle sawn woods available: Red Oak, White Oak, Hard Maple, & Hickory

Circle Sawn Doors Drawer fronts use the same pricing procedure with the below style costs. There is also a ½ (.5) square foot minimum on the wood cost. DRAWER FRONT STYLE COSTS

Style Cost Style Cost Minimum Minimum Style No. Style Cost Under 6” Over 6” Width Height DFDE N/A $7.60 $8.60 2 ¾” 2 ¾” DFRP N/A $8.70 $9.70 3 ¼” 3 ¼” DFLS N/A $10.90 $12.90 7” 3” 111 $16.10 N/A N/A 7 ¾” 6” 111FP $16.10 N/A N/A 7” 5”

DOOR STYLE COSTS WOOD COSTS (Doors and Fronts)

Group Door Style Numbers Letter Wood Type Cost

A 11 Hard Maple $8.60 21, 31, 41, 51, 61, 71, 81, B 212L, 212R, 213L, 213R Hickory $8.60 C 12, 13 Red Oak $7.80 22, 23, 32, 33, 42, 43, 52, 53, D White Oak $8.60 62, 63, 72, 73, 82, 83 E 24, 34, 44, 54, 64, 74, 84 F 412 G 413, 414

Group A B C D E F G

MINIMUM WIDTH 7 ¾” 8 ¾” 8 ¾” 8 ¾” 8 ¾” 13 ½” 13 ½” MINIMUM LENGTH 7 ¾” 9 ¾” 18 18 12 13 ½” 23

Style Cost $16.20 $17.85 $18.85 $20.35 $19.10 $20.10 $24.10

Cabinet stock and random lumber is available. Call for current Circle Sawn random lumber and cabinet stock prices.

21 WOOD COSTS (Doors and Fronts)

Wood Tech Industries, Inc.