K2 Keyboard list for K2 V1.4

Key

^ = Press and hold the CTRL key

ALT = Press and hold the

SHIFT = Press and hold the

ENT = Press and release the

= number

= Cuelist number, numbers can be specified up to two decimal places so 1.12 is valid.

= Cue number, numbers can be specified up to two decimal places so 1.12 is valid.

= Preset number, numbers can be specified up to two decimal places so 1.12 is valid.

= Construct number

= Playback letter A to F selected on the PC keyboard

[OPEN] = Button on Playback wing, the text is the text on the button for example this is the “OPEN” key.

[SELECTx] = Choose a Playback select key on the Playback wing

[PARAM] = Parameter button on Wing X Y Z P T R

[DMH] = Press the DMH bar at the bottom of the wing, this is also the CTRL key on the Keyboard

Enter = Press the Enter key either on the wing or the keyboard

When entering commands into the “command line”. Press the first, to clear the command line of any unrecognised input.

Page 1 of 14 V3.29 Notes – K2 WING KEYCAP CHANGES

The following keys on the Wing have been re-used for these new functions

1. The [VIEW] button on the wing is used as the [PRESET] button 2. The [GOTO] button on the wing is used as the [ATTACH] button 3. The [LOAD] button on the wing is used as the [IMPORT] button

Becomes

In the following documentation references to [VIEW], [GOTO] and [LOAD] have been changed to the new designations [PRESET], [ATTACH] and [IMPORT] respectively.

Page 2 of 14 V3.29 Open CueList

CueLists Screen Wing Keyboard Open Cuelists Directory [OPEN] [LIST] ENTER] O L ENT Open Cuelist window on [OPEN] [LIST] [ENTER] O L ENT screen [OPEN] [ENTER] O ENT

Open Cuelist that is ALT ALT currently loaded on a

selected Playback (Double Click on Playback (For example ALT A ALT A, (Playback A Demonstrated) select button) pressed within 1 sec would then open the cuelist currently pressed within 1 sec attached to Playback A)

Open Cue window

Cues Screen Wing Keyboard Open cue in current cuelist [OPEN] [CUE] [ENTER] O Q ENT

Open Cue from specified [OPEN] / O / ENT cuelist [ENTER]

[OPEN] [LIST] [CUE] O L Q [ENTER] ENT

[OPEN] [CUE] [LIST] O Q L [ENTER] ENT

Page 3 of 14 V3.29 Open Preset window

Presets Screen Wing Keyboard Open Presets Directory [OPEN] [PRESET] [ENTER] O P ENT Open Preset window on [OPEN] [PRESET] O P ENT screen [ENTER]

Programmer – Importing existing cues

Programmer – Importing Screen Wing Keyboard cues Import Cue from current [IMPORT] [ENTER] I ENT cuelist into programmer

Enter [IMPORT] [CUE] I Q ENT [ENTER] Import Cue from specific [IMPORT] / I / ENT Cuelist [ENTER]

[IMPORT] [LIST] [CUE] I L Q ENT [ENTER]

[IMPORT] [CUE] [LIST] I Q L ENT [ENTER]

Programmer – Recording cues

Programmer – Recording Screen Wing Keyboard cues Add to end of current [RECORD] [ENTER] R ENT Cuelist Enter Add to Cuelist on selected [RECORD] [SELECTx] R ALT ENT Master, added to the end of the Cuelist on selected

master Record specific Cue number [RECORD] [ENTER] R ENT in current Cuelist Enter R Q ENT Update currently imported [RECORD] [RECORD] R R ENT cue in the programmer, i.e write it back to the Cuelist overwriting the original Record specified cue in [RECORD] / R / ENT specified cuelist [ENTER]

[RECORD] [LIST] [CUE] R L Q [ENTER] ENT

[RECORD] [CUE] [LIST] [ENTER] R Q L ENT

Page 4 of 14 V3.29 Programmer – Importing presets

Programmer – Load Screen Wing Keyboard presets Import preset [IMPORT] [PRESET] I P ENT [ENTER]

Note importing presets is additive, so you can import multiple presets one after the other into the programmer and each import will overwrite any previous settings. If a preset has no settings for a particular construct parameter, then the current settings, if any, are used.

Programmer – Recording presets

Programmer – Recording Screen Wing Keyboard presets Record preset [RECORD] [PRESET] R P ENT [ENTER]

Programmer – Select Constructs

Programmer – Select Screen Wing Keyboard Constructs Select / Deselect single ENT Construct

Select all constructs from [THRU] [ENTER] given number Select range of constructs [THRU] [ENTER]

Page 5 of 14 V3.29 Programmer – Editing

Programmer –Recording Screen Wing Keyboard cues Clear command line [CLEAR] Esc Clear programmer editing [KINESYS] and [CLEAR] ^K (Keys pressed together) Clear one item from the [] Backspace command line Remove just selected Del construct parameter from programmer (Need to select parameter() on screen with mouse) Knockout K Remove all programming for selected constructs in programmer Touch U Get Parameter values from real world for selected constructs Absolute move [PARAM] @ [ENTER] ^Z @ ENT (positive relative move) [PARAM] + [ENTER] ^Z + ENT (negative relative move) [PARAM] – [ENTER] ^Z - ENT (set move time) [PARAM] [TIME] [ENTER] ^Z T ENT (set move speed) [PARAM] [SPEED] ^Z S ENT [ENTER] (set delay time) [PARAM] [TIME] [TIME] ^Z T T ENT [ENTER] (set move acceleration) [PARAM] [SPEED] [SPEED] ^Z S S ENT [ENTER] (set move deceleration) [PARAM] [SPEED] [SPEED] ^Z S S S ENT [SPEED] [ENTER]

Set Construct to preset value @ [PRESET] [ENTER] @ P ENT Set Construct Parameter [PARAM] @ [PRESET] ^Z @ P ENT value to preset value [ENTER] Example showing setting [PARAM] @ [SPEED] ^Z @ S Speed on Absolute move [ENTER] ENT Example Showing setting [PARAM] + [TIME] ^Z @ T ENT Time on relative move [ENTER]

Programmer – Testing Cues

Programmer – Testing Screen Wing Keyboard Cues Try Cue End

Calc minimum and Home maximum Cue Times

Page 6 of 14 V3.29 Programmer – Movement

Programmer – Movement Screen Wing Keyboard Programmer Output ^ PgDn

Programmer Stop PgUp

Programmer Rewind

Global Stop Spacebar Toggle programmer rate [MANUAL] [PARAM] wheel from “Cue Rate adjustment” to “parameter The Manual button will be joystick” illuminated and the selected Parameter will flash when in joystick mode. Toggle programmer rate [MANUAL] wheel from “parameter joystick” mode to “Cue The Manual button will not be Rate adjustment” mode illuminated Programmer Snap

Page 7 of 14 V3.29 Copy commands

With copy commands the format is “Source” “Destination” i.e. the Source is specified first then C is pressed followed by the destination

Copy Cues Screen Wing Keyboard Copy between specific cues L Q C L in different cue lists Q ENT Copy between specific cues L Q C Q in same cue lists ENT Copy between specific cues Q C Q in the cue list for the ENT currently selected master

Copy Cue List Screen Wing Keyboard Copy cue lists L C L ENT

C ENT

Copy Preset Screen Wing Keyboard Copy preset P C P ENT

Page 8 of 14 V3.29 Playback

Playback Screen Wing Keyboard Playback A Go ^F1

Playback A Stop / Pause F2

Playback B Go ^F3

Playback B Stop / Pause F4

Playback C Go ^F5

Playback C Stop / Pause F6

Playback D Go ^F7

Playback D Stop / Pause F8

Playback E Go ^F9

Playback E Stop / Pause F10

Playback F Go ^F11

Playback F Stop / Pause F12

Select Current Playback ALT (Playback A

demonstrated) (For example ALT A would select playback A)

Release constructs currently locked to selected Playback, to allow another playback to take control of them

Check which Playbacks Playbacks that ALT have locked Constructs, are locking Press the Playback to be construct flash (For example ALT A Run. Playbacks that are blue on Wing would select playback A) locking constructs are shown in red on screen Page 9 of 14 V3.29 Playback Screen Wing Keyboard Global Stop Spacebar Cue Playback rate adjust (Allow adjustment of Rate between x 0.2 and x 2)

Attach Cuelist to currently [ATTACH] [ENTER] A ENT selected playback

Press Attach followed by Cuelist number then Enter Attach Cuelist into [ATTACH] [SELECTx] A ALT selected playback ENT

Press Attach followed by Cuelist number then the desired playback select Unload Cuelist from [ATTACH] [SELECTx] A ALT ENT selected playback

Press Attach followed the desired playback select

Page 10 of 14 V3.29 Playback Screen Wing Keyboard Select next cue to run in [CUE] [ENTER] Q ENT currently selected playback

Switch to Safe Mode

Playback – Snap (Only in Offline mode)

Playback - Pages Screen Wing Keyboard Snap to cue position SHIFT ^ F1 on chosen playback SHIFT F1 = Playback A [KINESYS] and F3 = Playback B (Keys pressed together) Etc … Snap to cue position on current playback

Page 11 of 14 V3.29 Playback - Pages

Playback - Pages Screen Wing Keyboard Next playback page >

Previous playback page <

Select Page number

Page 12 of 14 V3.29 Playback - Pages Screen Wing Keyboard Select Page Bank

Press and hold the Bank button then choose the bank number required.

Banks are selected in groups of 8 there can be up to 8 banks of 8 pages each.

Misc Commands

Misc Commands Screen Wing Keyboard Open Patch Browser B

Followed by

DMC Manual Move Up ^ UPARROW DMC Manual Move Down ^ DOWNARROW Ctrl key on Keyboard [DMH] ^ Substitute for pressing the DMH on wing Open Show Notes window N

Followed by

Page 13 of 14 V3.29 Resetting the K2 wing

To reset the K2 wing press playback buttons 1 and 4 and construct buttons 9 and 16 at the same time. Whilst these four buttons are pressed all the lights on the K2 wing will be illuminated. The action of releasing these four buttons will cause the wing firmware to restart and reconnect to K2.

Page 14 of 14 V3.29