Contents Wireless Display ...... 28 Safety Information ‡ Do not place any heat sources such as electric heaters, radiators, etc. near the TV set. Safety Information ...... 2 Connecting Other Wireless Devices ...... 28 ‡ Do not place the TV on the floor and inclined Connectivity Troubleshooting ...... 28 Markings on the Product...... 2 CAUTION surfaces. Using Audio Video Sharing Network Service ...... 29 Environmental Information...... 3 RISK OF ELECTRIC SHOCK ‡ To avoid danger of suffocation, keep plastic bags Features ...... 3 Apps ...... 29 DO NOT OPEN out of the reach of the babies, children and domestic animals. Accessories Included...... 4 Freeview Play Platform...... 30 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO ‡ Carefully attach the stand to the TV. If the stand is Standby Notifications ...... 4 Internet Browser ...... 30 NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER provided with screws, tighten the screws firmly to TV Control Button & Operation ...... 4 HBBTV System...... 30 SERVICING TO QUALIFIED SERVICE PERSONNEL. prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly. Using Main TV Menu ...... 5 Smart Center ...... 31 In extreme weather (storms, lightning) and long inactivity ‡ Do not dispose of the batteries in fire or with Inserting the Batteries into the Remote ...... 6 DVB functionality information ...... 32 periods (going on holiday) disconnect the TV set from the mains. hazardous or flammable materials. Power Connection ...... 6 The mains plug is used to disconnect TV set from the mains WARNING - Batteries must not be exposed to Antenna Connection ...... 6 and therefore it must remain readily operable. If the TV set is excessive heat such as sunshine, fire or the like. License Notification ...... 7 not disconnected electrically from the mains, the device will WARNING - Excessive sound pressure from earphones still draw power for all situations even if the TV is in standby or headphones can cause hearing loss. Disposal Information ...... 7 mode or switched off. ABOVE ALL - NEVER let anyone, especially Specification ...... 8 Note: Follow the on screen instructions for operating the related children, push or hit the screen, push anything Remote Control ...... 9 features. into holes, slots or any other openings in the case. Connections...... 10 IMPORTANT - Please read these instructions Serious injury or death risk Switching On/Off ...... 11 fully before installing or operating Caution WARNING: This device is intended to be used First Time Installation...... 11 Dangerous voltage risk by persons (including children) who are Risk of electric shock Using Satellite Channel Table Feature ...... 12 capable / experienced of operating such a device Important maintenance Media Playback via USB Input ...... 12 unsupervised, unless they have been given Maintenance component USB Recording ...... 13 supervision or instruction concerning the use of Media Browser...... 14 the device by a person responsible for their safety. Markings on the Product FollowMe TV ...... 14 ‡ Use this TV set at an altitude of less than 2000 meters The following symbols are used on the product as above the sea level, in dry locations and in regions CEC ...... 14 a marker for restrictions and precautions and safety with moderate or tropical climates. instructions. Each explanation shall be considered E-Manual ...... 15 ‡ The TV set is intended for household and similar where the product bears related marking only. Note Settings Menu Contents ...... 16 general use but may also be used in public places. such information for security reasons. General TV Operation ...... 21 ‡ For ventilation purposes, leave at least 5cm of free Class II Equipment: This appliance is Using the Channel List ...... 21 space around the TV. designed in such a way that it does not require a safety connection to electrical earth. Configuring Parental Settings ...... 21 ‡ The ventilation should not be impeded by covering or blocking the ventilation openings with items, such Hazardous Live Terminal: The marked Electronic Programme Guide ...... 21 as newspapers, table-cloths, curtains, etc. terminal(s) is/are hazardous live under normal Teletext Services ...... 22 ‡ The power cord plug should be easily accessible. Do operating conditions. Software Upgrade...... 22 not place the TV, furniture, etc. on the power cord. Caution, See Operating Instructions: The Troubleshooting & Tips ...... 22 A damaged power cord/plug can cause fire or give  marked area(s) contain(s) user replaceable PC Input Typical Display Modes ...... 23 you an electric shock. Handle the power cord by the coin or button cell batteries. plug, do not unplug the TV by pulling the power cord. Class 1 Laser Product: This AV and HDMI Signal Compatibility ...... 23 Never touch the power cord/plug with wet hands as product contains Class 1 Supported File Formats for USB Mode ...... 24 this could cause a short circuit or electric shock.     laser source that is safe under Video File Formats ...... 24 Never make a knot in the power cord or tie it with reasonably foreseeable Picture File Formats ...... 24 other cords. When damaged it must be replaced, this conditions of operation. should only be done by qualified personnel. Audio File Formats ...... 24 ‡ Do not expose the TV to dripping or splashing of Subtitle File Formats...... 25 liquids and do not place objects filled with liquids, Supported DVI Resolutions ...... 25 such as vases, cups, etc. on or over the TV (e.g., Connectivity ...... 26 on shelves above the unit). Wired Connectivity...... 26 ‡ Do not expose the TV to direct sunlight or do not place open flames such as lit candles on the top of Wireless Connectivity ...... 26 or near the TV. Wake ON ...... 27

English - 1 - English - 2 - ‡ OSD menu system of about 5 minutes. You can highlight Yes and press WARNING WALL MOUNTING WARNINGS ‡ Back AV inputs for external devices (such as DVD OK to switch the TV into standby mode immediately. If you highlight No and press OK, the TV will remain Do not ingest the battery, Chemical Burn Hazard ‡ Read the instructions before mounting your TV Players, PVR, video games, etc.) This product or the accessories supplied with the on. You can also choose to cancel the Auto TV OFF on the wall. ‡ Stereo sound system product may contain a coin/button cell battery. If the function from this dialogue. Highlight Disable and coin/button cell battery is swallowed, it can cause ‡ The wall mount kit is optional. You can obtain from ‡ Teletext press OK, the TV will remain on and the function will your local dealer, if not supplied with your TV. severe internal burns in just 2 hours and can lead ‡ Headphone connection be cancelled. You can enable this function again by to death. ‡ Do not install the TV on a ceiling or on an inclined changing the setting of the Auto TV OFF option from ‡ Automatic programming system Keep new and used batteries away from children. wall. the Settings>System>More menu. If the battery compartment does not close secure- ‡ Manual tuning ‡ Use the specified wall mounting screws and other TV Control Button & Operation ly, stop using the product and keep it away from accessories. ‡ Automatic power down after up to eight hours children. If you think batteries might have been swallowed or ‡ Tighten the wall mounting screws firmly to prevent ‡ Sleep timer placed inside any part of the body, seek immediate the TV from fall. Do not over-tighten the screws. ‡ Child lock medical attention. ‡ Automatic sound mute when no transmission – – – – – – – – – – – – Figures and illustrations in this user manual are ‡ NTSC playback A television may fall, causing serious personal injury provided for reference only and may differ from the or death. Many injuries, particularly to children, can actual product appearance. Product design and ‡ AVL (Automatic Volume Limiting) be avoided by taking simple precautions such as: specifications may be changed without notice. ‡ PLL (Frequency Search) ‡ ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of Environmental Information ‡ PC input the television set. This television is designed to be environment friendly. ‡ Game Mode (Optional) ‡ ALWAYS use furniture that can safely support the To reduce energy consumption, you can follow these ‡ Picture off function Note: The position of the control button may differ depending television set. steps: on the model. ‡ ALWAYS ensure the television set is not overhang- ‡ Programme recording Your TV has a single control button. This button allows ing the edge of the supporting furniture. If you set the Energy Saving to Minimum, Medium, ‡ Programme timeshifting ‡ ALWAYS educate children about the dangers of Maximum or Auto the TV will reduce the energy you to control the Standby-On / Source / Programme ‡ Ethernet (LAN) for Internet connectivity and service climbing on furniture to reach the television set consumption accordingly. If you like to set the and Volume functions of the TV. or its controls. Backlight to a fixed value set as Custom and adjust ‡ 802.11 a/b/g/n built in WLAN Support Operating with the Control Button the Backlight (located under the Energy Saving ‡ ALWAYS route cords and cables connected to ‡ Press the control button to display the function setting) manually using Left or Right buttons on the ‡ Audio Video Sharing your television so they cannot be tripped over, options menu. pulled or grabbed. remote. Set as Off to turn this setting off. ‡ HbbTV ‡ NEVER place a television set in an unstable Note: Available Energy Saving options may differ depending Accessories Included ‡ Then press the button consecutively to move the location. on the selected Mode in the Settings>Picture menu. focus to the desired option if needed. ‡ Remote Control ‡ NEVER place the television set on tall furniture The Energy Saving settings can be found in the Set- ‡ Press and hold the button for about 2 seconds to ‡ Batteries: 2 x AAA (for example, cupboards or bookcases) without tings>Picture menu. Note that some picture settings activate the selected option. The icon colour of the anchoring both the furniture and the television set will be unavailable to be changed. ‡ Instruction Book option changes when activated. to a suitable support. ‡ Quick Start Guide ‡ Press the button once again to use the function or ‡ NEVER place the television set on cloth or other If pressed Right button or Left button consecutively, enter the sub menu. materials that may be located between the televi- “6FUHHQZඈOOEHRIIඈQVHFRQGV´PHVVDJHZඈOOEH Standby Notifications GඈVSOD\HGRQWKHVFUHHQ6HOHFWProceed and press sion set and supporting furniture. If the TV does not receive any input signal (e.g. from ‡ To select another function option, you will need to OK to turn the screen off immediately. If you don’t ‡ NEVER place items that might tempt children an aerial or HDMI source) for 3 minutes, it will go deactivate the last activated option first. Press and press any button, the screen will be off in 15 seconds. to climb, such as toys and remote controls, on into standby. When you next switch-on, the following hold the button to deactivate it. The icon colour of Press any button on the remote or on the TV to turn the top of the television or furniture on which the message will be displayed: “TV switched to stand-by the option changes when deactivated. the screen on again. television is placed. mode automatically because there was no signal ‡ To close the function options menu do not press the If the existing television set is going to be retained Note: Screen Off option is not available if the Mode is set for a long time.” button for a period of about 5 seconds. The function and relocated, the same considerations as above to Game. The Auto TV OFF option(in the Settings>System options menu will disappear. should be applied. When the TV is not in use, please switch off or – – – – – – – – – – – – >More menu) could have been set to a value between To turn the TV off: Press the control button to display disconnect the TV from the mains plug. This will also 1 and 8 hours by default. If this setting is not set as Off the function options menu, the focus will be on the Apparatus connected to the protective earthing of the reduce energy consumption. building installation through the MAINS connection or and the TV has been left on and not been operated Standby option. Press and hold the button for about through other apparatus with a connection to protec- Features during the set time, it will switch into standby mode 2 seconds to activate this option. The icon colour of tive earthing – and to a television distribution system ‡ Remote controlled colour TV after the set time has expired. When you next switch-on the option changes when activated. Then press the the TV, the following message will be displayed. “TV button once again to turn the TV off. using coaxial cable, may in some circumstances ‡ Fully integrated digital terrestrial/cable/satellite TV switched to stand-by mode automatically because create a fire hazard. Connection to a television dis- (DVB-T-T2/C/S-S2) To turn on the TV: Press the control button, the TV tribution system has therefore to be provided through no operation was made for a long time.” Before the will turn on. ‡ HDMI inputs to connect other devices with HDMI TV switches into standby mode a dialogue window will a device providing electrical isolation below a certain To change volume: Press the control button to display sockets be displayed. If you do not press any button the TV frequency range (galvanic isolator) the function options menu and then press the button ‡ USB input will switch into the standby mode after a waiting period English - 3 - English - 4 - consecutively to move the focus to Volume + or 1. Home Recording Settings Sources Volume - option. Press and hold the button for about When main menu is opened Home menu bar will You can also configure your recording preferences You can manage your input source references using 2 seconds to activate the selected option. The icon be highlighted. The content of the Home menu can using the Settings tab in the Recordings menu. the options of this menu. To change the current source colour of the option changes when activated. Then be customised by adding options from other menus. Highlight Settings tab by using Left or Right button highlight one of the options and press OK. press the button to increase or decrease the volume. Just highlight an option and press the Down direction and press OK. Then select the desired item in the Source Settings To change channel: Press the control button to button on the remote. If you see Add to Home option sub-menu and set by using Left or Right button. display the function options menu and then press the you can add it to the Home menu. Same way you (GඈW WKH QDPHV HQDEOH RU GඈVDEOH VHOHFWHG VRXUFH Start early: You can set recording timer’s starting RSWඈRQV button consecutively to move the focus to Programme can delete or change the position of any item in the time to start earlier by using this setting. + or Programme - option. Press and hold the button Home menu. Press the Down direction button and Inserting the Batteries into the Remote End late: You can set recording timer’s end time to for about 2 seconds to activate the selected option. select Delete or Move option and press OK. In order Remove the screw that secure the battery compart- end later by using this setting. The icon colour of the option changes when activated. to move a menu item use the Right and Left direction ment cover on the back side of the remote control Then press the button to switch to the next or previous buttons to select the position that you want the item Max Timeshift: This setting allows you to set the first. Insert two size AAA batteries. Make sure the (+) channel in the channel list. to move to and press OK. maximum duration for the timeshift recording. and (-) signs match (observe correct polarity). Do not To change source: Press the control button to display 2. TV Available options are approximate and the actual mix old and new batteries. Replace only with same or recording time may change in practice depending on the function options menu and then press the button 2.1. Guide equivalent type. Place the cover back on. Then screw consecutively to move the focus to Source option. the broadcast. The reserved and free storage space the cover back on again. You can access the electronic programme guide menu values will change according to this setting. Make Press and hold the button for about 2 seconds to A message will be displayed on the screen when the using this option. Refer to Electronic Programme sure that you have enough free space otherwise activate this option. The icon colour of the option batteries are low and must be replaced. Note that when Guide section for more information. instant recording may not be possible. changes when activated. Then press the button once the batteries are low, the performance of the remote again to display the sources list. Scroll through the 2.2. Channels Auto discard: You can set the Discard type as control may be impaired. available sources by pressing the button. TV will None, Oldest, Longest or Shortest. If it is not You can access the Channels menu using this option. Batteries should not be exposed to excessive heat automatically switch to the highlighted source. set to None, you can set the Unplayed option as Refer to Using the Channel List section for more such as sunshine, fire or the like. Note: Main menu OSD cannot be displayed via the control information. Included or Excluded. These options determine the preferences for deleting the recordings in order Power Connection button. 2.3. Timers to obtain more storage space for ongoing records. IMPORTANT: The TV set is designed to operate on a Operation with the Remote Control You can set timers for future events using the options of Hard disk information: You can view detailed 9$&+] supply. After unpacking, allow the Press the Menu button on your remote control to this menu. You can also review the previously created information about the USB storage device connected TV set to reach the ambient room temperature before display main menu. Use the directional buttons and timers under this menu. to your TV. Highlight and press OK to see and press you connect the set to the mains. Plug the power cable OK button to navigate and set. Press Return/Back To add a new timer select the Add Timer tab using the Back/Return to close. to the mains socket outlet. or Menu button to quit a menu screen. Left/Right buttons and press OK. Set the sub-menu Format Disk: If you want to delete all files on the Antenna Connection Input Selection options as desired and when finished press OK. A new timer will be created. connected USB storage device and convert the disk Connect the aerial or cable TV plug to the AERIAL Once you have connected external systems to your format to FAT32, you can use this option. Press OK INPUT (ANT-TV) socket or satellite plug to the To edit a previously created timer, highlight that timer, TV, you can switch to different input sources. Press the button while the Format Disk option is highlighted. SATELLITE INPUT (ANT SAT) socket located on the select the Edit Selected Timer tab and press OK. Source button on your remote control consecutively A menu will appear on the screen, requiring you rear side of the TV. to select the different sources. Change the sub-menu options as desired and press to enter the PIN(*). After you enter the PIN, a OK to save your settings. Rear side of the TV Changing Channels and Volume confirmation message will be displayed. Select Yes To cancel an already set timer, highlight that timer, and press OK to start formatting the USB storage You can change the channel and adjust the volume select Delete Selected Timer tab and press OK. A device. Select No and press OK to cancel. by using the Programme +/- and Volume +/- buttons confirmation message will be displayed. Highlight Yes  on the remote. (*) Default PIN could have been set to 0000 or 1234. If you and press OK to proceed. The timer will be cancelled. have defined the PIN(is requested depending on the country Using Main TV Menu It is not possible to set timers for two or more events selection) during the First Time Installation use the PIN that you have defined. When the Menu button is pressed, the main TV menu that will broadcasted in different channels at the same $176$7 will appear at the bottom of the screen. You can time interval. In this case you will be asked to choose 3. Settings navigate through the menu items using the directional one of these timers and cancel others. Highlight the You can manage the settings of your TV using the op- buttons on the remote. To select an item or see the timer you want to cancel and press OK, Options menu tions of this menu. Refer to Settings Menu Contents $1779 will be displayed. Then highlight Set/Cancel and press sub-menu options of the highlighted menu press OK section for more information.  button. When you highlight a menu option some of the OK to cancel that timer. You will have to save changes 4. Apps sub-menu items of this menu may appear on the upper after that. In order to do that press OK, highlight Save side of the menu bar for quick access. To use a quick Changes and press OK again. When your TV is connected to the Internet related contents will also be available, including Apps related 1. Satellite access item highlight it, press OK and set as desired 2.4. Recordings using the Left/Right directional buttons. When finished contents. Using the Apps menu you can access and 2. Aerial or cable You can manage your recordings using the options press OK or Back/Return button to exit. manage your applications. You can add new apps from of this menu. You can playback, edit, delete or sort the market or delete the existing ones. Refer to Apps If you want to connect a device to the TV, make Press Exit button to close the main menu. previously recorded events. Highlight a tab by using section for more information. sure that both the TV and the device are turned off the Left or Right direction button and press OK to see before making any connection. After the connection available options. is done, you can turn on the units and use them.

English - 5 - English - 6 - License Notification For more information about collection points and Specification Wireless LAN Transmitter Specifications recycling of these products, please contact your The terms HDMI, HDMI High-Definition Multimedia Frequency Ranges Max Output Power local municipal office, your household waste disposal PAL BG/I/DK TV Broadcasting Interface, and the HDMI Logo are trademarks or service or the shop where you purchased the product. SECAM BG/DK registered trademarks of HDMI Licensing Administrator, 2400 - 2483,5 MHz (CH1-CH13) < 100 mW Penalties may be applicable for incorrect disposal of VHF (BAND I/III) - UHF Inc. Receiving Channels 5150 - 5250 MHz (CH36 - CH48) < 200 mW this waste, in accordance with national legislation. (BAND U) - HYPERBAND 5250 - 5350 MHz (CH52 - CH64) < 200 mW [Business users] )XOO\ඈQWHJUDWHGGඈJඈWDO WHUUHVWUඈDOFDEOHVDWHOOඈWH If you wish to dispose of this product, please contact Digital Reception 5470 - 5725 MHz (CH100 - Manufactured under license from Dolby Laboratories. TV(DVB-T-C-S) < 200 mW your supplier and check the terms and conditions of CH140) Dolby, Dolby Audio and the double-D symbol are '9%7'9%6FRPSOඈDQW the purchase contract. Country Restrictions trademarks of Dolby Laboratories. Number of Preset [Other Countries outside the European Union] 11 000 YouTube and the YouTube logo are trademarks of Channels This device is intended for home and office use in all EU countries (and other countries following the rele- Google Inc. These symbols are only valid in the European Union. Channel Indicator On Screen Display vant EU directive) without any limitation except for the Contact your local authority to learn about disposal This product contains technology subject to certain RF Aerial Input 75 Ohm (unbalanced) countries mentioned below. intellectual property rights of Microsoft. Use or and recycling. Operating Voltage 220-240V AC, 50Hz. distribution of this technology outside of this product The product and packaging should be taken to your Country Restriction Audio German+Nicam Stereo is prohibited without the appropriate license(s) from local collection point for recycling. General authorization required for outdoor Bulgaria Microsoft. Audio Output Power use and public service Some collection points accept products free of charge. 2 x 6 Content owners use Microsoft PlayReady™ content (WRMS.) (10% THD) If used outside of own premises, general Note: The sign Pb below the symbol for batteries indicates Italy access technology to protect their intellectual property, that this battery contains lead. Power Consumption (W) 65 authorization is required including copyrighted content. This device uses In-door use only for 5470 MHz to 5725 Networked Standby Greece < 2 MHz band PlayReady technology to access PlayReady-protected Power Consumption (W) content and/or WMDRM-protected content. If the General authorization required for network TV Dimensions DxLxH Luxembourg device fails to properly enforce restrictions on content   184 x 732 x 476 and service supply(not for spectrum) (with stand) (mm) usage, content owners may require Microsoft to revoke Radio transmission is prohibited for the TV Dimensions DxLxH the device’s ability to consume PlayReady-protected 53/94 x 732 x 435 Norway geographical area within a radius of 20 km content. Revocation should not affect unprotected (without stand) (mm) from the centre of Ny-Ålesund content or content protected by other content access 'ඈVSOD\ 32” Russian Fed- In-door use only technologies. Content owners may require you to 1. Products eration Operation temperature 0ºC up to 40ºC, 85% upgrade PlayReady to access their content. If you 2. Battery 5 GHz band only for 5180 MHz-5320 and operation humidity humidity max Israel decline an upgrade, you will not be able to access MHz range content that requires the upgrade. The requirements for any country may change at any The “CI Plus” Logo is a trademark of CI Plus LLP. time. It’s recommended that user checks with local This product is protected by certain intellectual property authorities for the current status of their national reg- rights of Microsoft Corporation. Use or distribution of ulations for 5 GHz wireless LAN’s. such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Disposal Information [European Union] These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of-life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with your national legislation and the Directive 2012/19/EU and 2013/56/EU. By disposing of these products correctly, you will help to conserve natural resources and will help to prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of these products.

English - 7 - English - 8 - Remote Control Connections See the illustrations on the left 1. Standby: Switches On / Off the TV Connector Type Cables Device side. You can use YPbPr to VGA cable to enable YPbPr signal via 2. Numeric buttons: Switches the channel, enters VGA input. You cannot use VGA a number or a letter in the text box on the screen. VGA Connection and YPbPr at the same time. To 3. Language: Switches among sound modes (an- (back) enable PC/YPbPr audio, you will alogue TV), displays and changes audio/subtitle need to use the back audio inputs language and turns subtitles on or off (digital TV, with a YPbPr/PC audio cable for audio connection. When using where available) PC/YPbPr AUDIO IN the wall mounting kit (available 4. Mute: Completely turns off the volume of the TV Audio from a third party in the market, Connection if not supplied), we recommend  Volume +/- YPbPr/PC Audio Cable (back) that you plug all your cables into 6. Guide: Displays the electronic programme guide the back of the TV before mounting 7. Directional buttons: Helps navigate menus, HDMI on the wall. Insert or remove the content etc. and displays the subpages in TXT Connection CI module only when the TV is mode when pressed Right or Left (side&back) SWITCHED OFF. You should refer to the module instruction manual 8. OK: Confirms user selections, holds the page (in SPDIF SPDIF for details of the settings. The/ TXT mode), views Channels menu (DTV mode) (Optical Out) Each USB input of your TV supports 9. Back/Return: Returns to previous screen, previous Connection devices up to 500mA. Connecting menu, opens index page (in TXT mode). Quickly (back) devices that have current value cycles between previous and current channels above 500mA may damage your TV. When connecting equipment using a or sources Back AV BACK AV (Audio/Video) HDMI cable to your TV, to guarantee 10. Netflix: Launches the Netflix application Connection sufficient immunity against parasitic 11. Freeview Play: Connects to the Freeview Play (back) Audio Video Cable frequency radiation, you have to use a high speed shielded (high grade) platform where you can access available catch-up HDMI cable with ferrites. TV services HEADPHONE 12. Coloured Buttons: Follow the on-screen instruc- Headphone Connection tions for coloured button functions (side) 13. Rewind: Moves frames backwards in media such as movies YPBPR YPbPr Video 14. Record: Records programmes Connection (back)  Play: Starts to play selected media PC to YPbPr Connection Cable

16. Pause: Pauses the media being played, starts USB timeshift recording Connection 17. Stop: Stops the media being played (side) 18. Fast Forward: Moves frames forward in media such as movies CI Connection CAM 19. Prime Video: Launches the Amazon Prime Video (side) module application 20. YouTube: Launches the YouTube application LAN Ethernet 21. Exit: Closes and exits from displayed menus or Connection

returns to previous screen (back) LAN / Ethernet Cable 22. Info: Displays information about on-screen content, shows hidden information (reveal - in TXT mode)

23. Menu: Displays TV menu If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making 24. Source: Shows available broadcast and content any connection. After the connection is done, you can turn on the units and use them. sources  Programme +/- 26. Text: Displays teletext (where available), press again to superimpose the teletext over a normal broadcast picture (mix)

English - 9 - English - 10 - Switching On/Off be able to change your preferences at any time Note: Searching duration will change depending on the Using Satellite Channel Table Feature later from the Settings>System>Privacy Settings selected Search Step. To Switch the TV On You can perform these operations using the Set- menu. If the Internet Connection option is disabled Satellite: If Satellite broadcast search option is turned tings>Installation>Satellite Settings>Satellite Connect the power cord to a power source such as a Network/Internet Settings screen will be skipped on, the TV will search for digital satellite broadcasts Channel Table menu. There are two options regarding wall socket (220-240V AC, 50 Hz). and not displayed. If you have any questions, after other initial settings are completed. Before to this feature. To switch on the TV from standby mode either: complaints or comments regarding this privacy satellite search is performed some settings should be policy or its enforcement, please contact by email at made. Antenna Type menu will be displayed first. You You can download or upload satellite channel table ‡ Press the Standby button, Programme +/- or a [email protected]. can select Antenna Type as Direct, Single Satellite data. In order to perform these functions a USB device numeric button on the remote control. must be connected to the TV. +ඈJKOඈJKW Next and press OK button on the remote Cable or DiSEqC switch by using Left or Right ‡ Press the control button on the TV. control to continue and the Network/Internet Settings buttons. After selecting your antenna type press OK to You can upload current services and related satellites To Switch the TV Off menu will be displayed. Please refer to &RQQHFWඈYඈW\ see the options to proceed. Continue, Transponder & transponders in TV, to a USB device. list and Configure LNB options will be available. You ‡ Press the Standby button on the remote control. VHFWඈRQWRFRQIඈJXUHDZඈUHGRUDZඈUHOHVVFRQQHFWඈRQ Additionally you can download one of the satellite ,I\RXZDQW\RXU79WRFRQVXPHOHVVSRZHUඈQVWDQGE\ can change the transponder and LNB settings using channel table files stored in USB device, to the TV. ‡ Press the control button on the TV, the function PRGH\RXFDQGඈVDEOHWKHWake OnRSWඈRQE\VHWWඈQJඈW the related menu options. options menu will be displayed. The focus will be When you select one of these files, all services and as Off$IWHUWKHVHWWඈQJVDUHFRPSOHWHGKඈJKOඈJKWNext ‡ Direct: If you have a single receiver and a direct on the Standby option. Press and hold the button related satellites and transponders in the selected and press OKEXWWRQWRFRQWඈQXH. satellite dish, select this antenna type. Press OK to for about 2 seconds to activate this option. The icon file will be stored in the TV. If there are any installed FRQWඈQXH Select an available satellite on the next colour of the option will change. Then press the On the next screen you need to agree to the terms terrestrial, cable and/or analogue services, they will screen and press OK to scan for services. button once again, the TV will switch into standby and conditions of Freeview Play to make use of the be kept and only satellite services will be removed. mode. related services. Scroll the page to read the entire text ‡ Single Satellite Cable: If you have multiple Afterwards, check your antenna settings and make using the up/down directional buttons or Programme receivers and a single satellite cable system, select To power down the TV completely, unplug the changes if necessary. An error message stating “No +/- buttons. Highlight Yes and press OK on the remote this antenna type. Press OK to continue. Configure power cord from the mains socket. Signal” may be displayed if the antenna settings are to confirm and proceed. Highlight No and press OK to settings by following instructions on the next screen. not configured properly. Note: When the TV is switched into standby mode, the standby proceed without confirmation. For further requirements Press OK to scan for services. Media Playback via USB Input LED can blink to indicate that features such as Standby for Freeview Play services refer to the Freeview Play Search, Over Air Download or Timer is active. The LED can ‡ DiSEqC switch: If you have multiple satellite dishes Platform section. You can connect 2.5” and 3.5” inch (HDD with external power also blink when you switch on the TV from standby mode. and a DiSEqC switch, select this antenna type. Then supply) external hard disk drives or USB memory stick to your set the DiSEqC version and press OKWRFRQWඈQXH First Time Installation On next screen you can set broadcast types to be TV by using the USB inputs of the TV. searched, set your encrypted channel searching You can set up to four satellites (if available) for IMPORTANT! Back up the files on your storage devices When turned on for the first time, the language and time zone (depending on the country selection) version v1.0 and sixteen satellites for version v1.1 before connecting them to the TV. Manufacturer will selection screen is displayed. Select the desired preferences. Additionally you can set a broadcast on the next screen. Press OK button to scan the first not be responsible for any file damage or data loss. language and press OK. In the following steps of type as your favourite one. Priority will be given to the satellite in the list. Certain types of USB devices (e.g. MP3 Players) the installation guide, set your preferences using the selected broadcast type during the search process Analogue: If Analogue broadcast search option is or USB hard disk drives/memory sticks may not be directional buttons and OK button. and the channels of it will be listed on the top of the turned on, the TV will search for analogue broadcasts compatible with this TV. The TV supports FAT32 and On the second screen set your country preference. channel list. When finished, highlight Next and press after other initial settings are completed. NTFS disk formatting but recording will not be available Depending on the Country selection you may be asked OK to continue. After the initial settings are completed TV will start with NTFS formatted disks. to set and confirm a PIN at this point. The selected PIN About Selecting Broadcast Type to search for available broadcasts of the selected cannot be 0000. You have to enter it if you are asked While formatting USB hard drives which have broadcast types. to enter a PIN for any menu operation later. To turn a search option for a broadcast type highlight more than 1TB (Tera Byte) storage space you may it and press OK. The checkbox next to the selected While the search continues current scan results will experience some problems in the formatting process. You can activate Store Mode option in the next step. option will be checked. To turn the search option off be displayed at the bottom of the screen. After all the Wait a little while before each plugging and unplugging This option will configure your TV’s settings for store clear the checkbox by pressing OK after moving the available stations are stored, Channels menu will be as the player may still be reading files. Failure to do environment and depending on the TV model being focus on the desired broadcast type option. displayed. You can edit the channel list according to used, the supported features of it may be displayed on so may cause physical damage to the USB player Digital Aerial: If D. Aerial broadcast search option your preferences using the Edit tab options or press and the USB device itself. Do not pull out your drive the side of the screen as an info banner. This option the Menu button to quit and watch TV. is intended only for store use. It is recommended to is turned on, the TV will search for digital terrestrial while playing a file. broadcasts after other initial settings are completed. select Home Mode for home use. This option will be While the search continues a message may appear, You can use USB hubs with your TV’s USB inputs. available in Settings>System>More menu and can Digital Cable: If D. Cable broadcast search option asking whether you want to sort channels according External power supplied USB hubs are recommended be turned off/on later. Make your selection and press is turned on, the TV will search for digital cable to the LCN(*). Select Yes and press OK to confirm. in such a case. broadcasts after other initial settings are completed. (*) LCN is the Logical Channel Number system that organizes OK to continue. It is recommended to use the TV’s USB input(s) A message will be displayed before starting to search available broadcasts in accordance with a recognizable Depending on the model of your TV and the country directly, if you are going to connect a USB hard disk. asking if you want to perform cable network search. If channel number sequence (if available). selection Privacy Settings menu may appear at you select Yes and press OK you can select Network Note: Do not turn off the TV while initializing first time Note: When viewing image files the Media Browser menu this point. Using this menu you can set your privacy or set values such as Frequency, Network ID and installation. Note that, some options may not be available can only display 1000 image files stored on the connected privileges. Highlight a feature and use Left and USB device. Search Step on the next screen. If you select No depending on the country selection. Right directional buttons to enable or disable. Read and press OK you can set Start Frequency, Stop the related explanations displayed on the screen Frequency and Search Step on the next screen. for each highlighted feature before making any When finished, highlight Next and press OK button changes. You can use Programme +/- buttons to to continue. scroll up and down to read the entire text. You will

English - 11 - English - 12 - USB Recording Timeshift cannot be used while in radio mode. Media Browser image as custom boot logo. A confirmation message will be displayed. Select Yes and press OK again. If Recording a Programme You can use the timeshift rewind feature after resuming You can play back music and movie files and display normal playback or fast forward option. the image is suitable(*) you will see it on the screen IMPORTANT: When using a new USB hard disk photo files stored on a USB storage device by during the TV’s next boot up. drive, it is recommended that you first format the Instant Recording connecting it to your TV. Connect a USB storage device to one of the USB inputs located on the side of the TV. Note: If you perform a First Time Installation the TV will disk using your TV’s Format Disk option in the Press Record button to start recording an event return to using the default logo, if any. TV>Recordings>Settings menu. instantly while watching a programme. You can press After connecting a USB storage device to your TV (*) Images should have an aspect ratio of 16:9 and they should To record a programme, you should first connect a USB Record button on the remote control again to record Media Browser menu will be displayed on the screen. be in .jpg, .jpeg or .jpe file formats. Only files with sizes no disk to your TV while the TV is switched off. You should the next event after selecting the next programme from You can access the content of the connected USB greater then 300KB are supported. The image cannot be set as then switch on the TV to enable the recording feature. within the electronic programme guide. Press Stop device any time later from the Sources menu. Select boot logo, which’s resolution doesn’t appear on the info banner. button to cancel instant recording. To use recording your USB drive should have 2 GB free the related USB input option from this menu and press FollowMe TV space and be USB 2.0 compatible. If the USB drive You can not switch broadcasts during the recording OK. Then select the file of your choice and press OK With your mobile device you can stream the current is not compatible an error message will be displayed. mode. While recording a programme or during the to display or play it back. broadcast from your smart TV using the FollowMe To record long duration programmes such as movies, it timeshifting, a warning message appears on the screen You can set your Media Browser preferences by using TV feature. Install the appropriate Smart Center is recommended to use USB Hard disk drives (HDD’s). if your USB device speed is not sufficient. the Settings menu. Settings menu can be accessed application to your mobile device. Start the application. Recorded programmes are saved into the connected Watching Recorded Programmes via the information bar which is displayed on the USB disk. If desired, you can store/copy recordings bottom of the screen when pressed the Info button For further information on using this feature refer to onto a computer; however, these files will not be Select Recordings from the TV menu. Select a the instructions of the application you use. recorded item from the list (if previously recorded). while playing back a video file or displaying a picture available to be played on a computer. You can play file. Press the Info button, highlight the gear wheel Note: Depending on model, your TV may not support this the recordings only via your TV. Press the OK button to view the Options menu. Select function. The application may not be compatible with all mobile an option then press OK button. symbol positioned on the right side of the information Lip Sync delay may occur during the timeshifting. Radio bar and press OK. Picture Settings, Sound Settings, devices. UHD (4K, Ultra HD) channels are not supported and record is supported. The TV can record programmes Note: Viewing main menu and menu items will not be available both of the devices must be connected to the same network. during the playback. Media Browser Settings and Options menus will be up to ten hours. available. The contents of these menus may change CEC Press the Stop button to stop a playback and return Recorded programmes are split into 4GB partitions. according to the type of the currently open media file. This function allows to control the CEC-enabled to the Recordings. If the writing speed of the connected USB disk is not Only Sound Settings menu will be available while devices, that are connected through HDMI ports by sufficient, the recording may fail and the timeshifting Slow Forward playing back audio files. using the remote control of the TV. feature may not be available. If you press Pause button while watching recorded The CEC option in the Settings>System>More menu It is recommended to use USB hard disk drives for programmes, the slow forward feature will be available. Loop/Shuffle Mode Operation should be set as Enabled at first. Press the Source recording HD programmes. You can use Fast Forward button to slow forward. All files in the list will be button and select the HDMI input of the connected Do not pull out the USB/HDD during a recording. This Pressing Fast Forward button consecutively will Start playback and activate continuously played in CEC device from the Sources List menu. When original order may harm the connected USB/HDD. change slow forwarding speed. new CEC source device is connected, it will be listed If the AC cord is unplugged while there is an active Recording Configuration The same file will be in source menu with its own name instead of the USB-recording timer setting, it will be cancelled. Start playback and activate played continuously Select the Settings tab in the TV>Recordings menu (repeat) connected HDMI ports name(such as DVD Player, Multipartition support is available. A maximum of two to configure the recording settings and press OK. Recorder 1 etc.). different partitions are supported. The first partition All files in the list will be played once in random The TV remote is automatically able to perform the of the USB disk is used for USB Recording ready Format Disk: You can use the Format Disk option for Start playback and activate order main functions after the connected HDMI source has features. It also must be formatted as the primary formatting the connected USB disk. Your PIN will be All files in the list will be been selected. To terminate this operation and control partition to be used for the USB Recording ready required to use the Format Disk feature. Start playback and activate , continuously played in the TV via the remote again, press and hold the “0- features. Note: Default PIN could have been set to 0000 or 1234. If you the same random order Zero” button on the remote control for 3 seconds. Some stream packets may not be recorded because have defined the PIN(is requested depending on the country selection) during the First Time Installation use the PIN that of signal problems, as a result sometimes videos may To use the functions on the information bar highlight the You can disable the CEC functionality by setting the you have defined. freeze during playback. symbol of the function and press OK. To change the related option under the Settings>System>More Record, Play, Pause, Display (for playlist dialogue) keys IMPORTANT: Formatting your USB drive will erase status of a function highlight the symbol of the function menu accordingly. can not be used when teletext is on. If a recording starts ALL the data on it and it’s file system will be converted and press OK as much as needed. If the symbol is The TV supports ARC (Audio Return Channel). This from timer when teletext is on, teletext is automatically to FAT32. In most cases operation errors will be fixed marked with a red cross, that means it is deactivated. feature is an audio link meant to replace other cables after a format but you will lose ALL your data. turned off. Also teletext usage is disabled when there Custom Boot Up Logo between the TV and an audio system (A/V receiver or is an ongoing recording or playback. If “USB disk writing speed too slow to record” You can personalize your TV and see your favourite speaker system). message is displayed on the screen while starting a Timeshift Recording image or photo on the screen each time your TV boots When ARC is active, the TV does not mute its other recording, try restarting the recording. If you still get up. To do this, copy your favourite image files into a audio outputs automatically. You will need to decrease Press Pause button while watching a broadcast to the same error, it is possible that your USB disk does USB disk and open them in the Media Browser. Select TV volume to zero manually if you wish to hear the activate timeshifting mode. In timeshifting mode, the not meet the speed requirements. Try connecting USB input from the Sources menu and press OK. ARC audio only (same as optical or co-axial digital programme is paused and simultaneously recorded to another USB disk. the connected USB disk. When you have chosen the desired image, highlight audio outputs). If you want to change connected it and press OK to view it in full screen. Press the Press Play button again to resume the paused device’s volume level, you should select that device Info button, highlight the gear wheel symbol on the programme from where you stopped. Press the Stop from the source list. In that case volume control keys information bar and press OK. Select Options and button to stop timeshift recording and return to the are directed to connected audio device. press OK to enter. Set Boot Logo option will be live broadcast. Note: ARC is supported only via the HDMI2 input. available. Highlight it and press OK again to choose the

English - 13 - English - 14 - System Audio Control Settings Menu Contents Allows an Audio Amplifier/Receiver to be used with the TV. The volume can be controlled using the re- Picture Menu Contents mote control of the TV. To activate this feature set the You can change the picture mode to suit your preference or requirements. Picture mode can Sound Output option in the Settings>Sound menu Mode be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. as HDMI ARC. When HDMI ARC option is selected, CEC option will be set as Enabled automatically, if it Contrast Adjusts the light and dark values on the screen. is not already set. The TV speakers will be muted and Brightness Adjusts the brightness values on the screen. the sound of the watched source will be provided from the connected sound system. Sharpness Sets the sharpness value for the objects displayed on the screen. Note: The audio device should support System Audio Control Colour Sets the colour value, adjusting the colours. feature. For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, E-Manual Energy Saving Screen Off or Off. You can find instructions for your TV’s features in the Note: Available options may differ depending on the selected Mode. E-Manual. This setting controls the backlight level. The backlight function will be inactive if the Backlight To access the E-Manual, enter Settings menu, select Energy Saving is set to an option other than Custom. Manuals and press OK. For quick access press Menu Advanced Settings button and then Info button. Dynamic By using the directional buttons select a desired You can change the dynamic contrast ratio to desired value. category. Every category includes different topics. Contrast Select a topic and press OK to read instructions. If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce Noise Reduction To close the E-Manual screen press the Exit or Menu the amount of noise. button. Sets the desired colour temperature value. Cool, Normal, Warm and Custom options Colour Temp Note: Depending on model, your TV may not support this are available. function. The contents of the E-Manual may vary according If the Colour Temp option is set as Custom, this setting will be available. Increase the to the model. White Point ‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons. Picture Zoom Sets the desired image size format. This option may be available depending on the Picture Zoom setting. Highlight and Picture Shift press OK, then use directional buttons to shift the picture upwards or downwards. Films are recorded at a different number of frames per second to normal television programmes. Film Mode Turn this feature on when you are watching films to see the fast motion scenes clearly. Skin Tone Skin tone can be changed between -5 and 5. Colour Shift Adjust the desired colour tone. While watching from a HDMI source, this feature will be visible. You can use this feature HDMI Full Range to enhance blackness in the picture. PC Position Appears only when the input source is set to VGA/PC. If the image is not centered in VGA mode use this option to automatically adjust the Autoposition position of the image. Press OK to start the auto adjustment. H Position This item shifts the image horizontally to the right hand side or left hand side of the screen. V Position This item shifts the image vertically towards the top or bottom of the screen. Dot Clock adjustments correct the interference that appear as vertical banding in dot Dot Clock intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Depending on the input source(computer etc.) you may see a hazy or noisy picture on Phase the screen. You can use phase to get a clearer picture by trial and error. Reset Resets the picture settings to factory default settings (except Game mode). While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu while in PC mode.

English - 15 - English - 16 - Sound Menu Contents Network Menu Contents Volume Adjusts the volume level. Network Type Disable the network connection or change the connection type. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Scan Wireless Start a search for wireless networks. This option will be available if the Network Type Networks is set as Wireless Device. Balance Adjusts whether the sound comes from the left or right speaker. If your modem/router device has WPS, you can directly connect to it using this option. Sets headphone volume. Press WPS on your Highlight this option and press OK. Go to your modem/router device and press the Headphone Please ensure before using headphones that the headphone volume is set to a low wifi router WPS button on it to make the connection. This option will be available if the Network level, to prevent damage to your hearing. Type is set as Wireless Device. Sound Mode You can select a sound mode (If the viewed channel supports). Start a speed test to check your connection bandwidth. The result will be displayed on Internet Speed Test the screen when finished. Press OK to open the Audio Link menu screen. Using this screen you can discover and Audio Link connect the sound devices to your TV wirelessly. Advanced Settings Change the IP and DNS configurations of your TV. Sets the sound to obtain fixed output level between programmes. Wake On Enable or disable this feature by setting it as On or Off. If the Dolby Audio menu item is set to an option other than Off the AVL setting options Note: For detailed information on the options of this menu refer to the Connectivity section. will change. Auto, Night, Normal and Off options will be available. In Auto mode the TV will switch to Normal or Night mode automatically according to the current time AVL (Automatic Installation Menu Contents information. If no time information is available this option will always function as Normal. Volume Limiting) Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations. When the TV switches to Night mode for the first time after setting this option as Auto, Automatic channel D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores an information bar will pop up on the screen. scan (Retune) analogue stations. 6DWHOOඈWH6HDUFKHVDQGVWRUHVVDWHOOඈWHVWDWඈRQV Please note that compared to Normal mode Night mode provides more aggressive dynamic compression control which is suitable for silent environments. Manual channel This feature can be used for direct broadcast entry. scan When you connect an external amplifier to your TV using the headphone jack, you can Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial select this option as Lineout. If you have connected headphones to the TV, set this Network channel option as Headphone. network channels. D. Cable: Searches for cable network channels. Satellite: Searches Headphone/Lineout scan Please ensure before using headphones that this menu item is set to Headphone. If it for satellite network channels. is set to Lineout, the output from the headphone socket will be set to maximum which You can use this setting for fine tuning analogue channels. This feature is not available could damage your hearing. Analogue fine tune if no analogue channels are stored and if currently watched channel is not an analogue Dynamic Bass Enables or disables the Dynamic Bass. channel. Smart, Movie, Music, News and Off options will be available. Set as Off to disable. Displays satellite settings. Satellite list: Displays available satellites. You can Add, Dolby Audio Delete satellites or Edit satellite settings on the list. Antenna installation: You can Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than Off. Satellite Settings change satellite antenna settings and/or start a satellite scan. Satellite Channel Table: Surround sound Surround sound mode can be changed as On or Off. You can upload or download satellite channel table data using the related options. Sets the sound output preference. TV, S/PDIF and HDMI ARC options will be available. Displays installation settings menu. Standby Search (*): Your TV will search for new or There will be no sound output except through the selected option. If HDMI ARC option missing channels while in standby. Any new found broadcasts will be shown. Dynamic Sound Output is selected, CEC feature will be enabled. Installation Settings Channel Update(*): If this option is set as Enabled, the changes on the broadcasts Note: Depending on the selected option some items in Sound menu will appear as grayed out and will be (optional) such as frequency, channel name, subtitle language etc., will be applied automatically unavailable. while watching. Digital Out Sets digital out audio type. (*) Availability depends on model. Use this setting to clear channels stored. This setting is visible only when the Country Clear Service List option is set to Denmark, Sweden, Norway or Finland. Select Active This setting allows you to select only the broadcasts within the selected network to be Network listed in the channel list. This feature is available only for the country option of Norway. You can use this menu item to monitor signal related information such as signal level/ Signal Information quality, network name etc for available frequencies. First time installation Deletes all stored channels and settings, resets TV to factory settings.

English - 17 - English - 18 - Select this mode for store display purposes. Whilst Store Mode is enabled, some items System Menu Contents Store Mode in the TV menu may not be available. Conditional Access Controls conditional access modules when available. AVS feature allows you to share files stored on your smartphone or tablet pc. If you have AVS (Audio Language You may set a different language depending on the broadcaster and the country. a compatible smartphone or tablet pc and the appropriate software is installed, you can Video Sharing) Manage your privacy privileges for smart TV related applications. Press OK to enter share/play photos on your TV. See instructions of your sharing software for more information. Privacy Settings (*) the menu and set according to your preferences. This setting configures the power up mode preference. Last State and Standby options Power Up Mode Enter correct password to change parental settings. You can easily adjust Menu Lock, are available. Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN Virtual Remote Enable or disable the virtual remote feature. or change the Default CICAM PIN using the related options. Parental With this setting you can enable and disable CEC functionality completely. Press Left Note: Some menu options may not be available depending on the country selection in the First Time CEC Installation. Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested or Right button to enable or disable the feature. depending on the country selection) during the First Time Installation use the PIN that you have defined. This function allows the connected HDMI-CEC compatible device to turn on the TV CEC Auto Power Date/Time Sets date and time. and switch to its input source automatically. Press Left or Right button to enable or On disable the feature. Sources Edit the names, enable or disable selected source options. To hear the TV audio from the connected compatible audio device set as Amplifier. Accessibility Displays accessibility options of the TV. Speakers (*) You can use the remote control of the TV to control the volume of the audio device. Enables any special feature sent from the broadcaster. Hard of Hearing Press OK to open the Smart Remote menu screen. Using this screen you can discover Smart Remote A narration track will be played for the blind or visually impaired audience. Press OK and connect the remote controller devices to your TV wirelessly. Audio to see all available Audio Description menu options. This feature is available only if 6KRZ$OO&RRNඈHV the broadcaster supports it. 'ඈVSOD\VDOOVDYHGFRRNඈHV Description (*) Note: Audio description sound feature is not available in recording or time shifting mode. Delete All Coo- If this feature is supported by your TV, you can view your ESN(*) number and deactivate 'HOHWHVDOOVDYHGFRRNඈHV NඈHV(*) Netflix. (*) ESN number is an unique ID number for Netflix, created especially to identify your TV. OSS Displays Open Source Software license information. Netflix Note:)RU.YਟGHRVWUHDPਟQJDPਟQਟPXP0EVਟQWHUQHWFRQQHFWਟRQVSHHGਟVUHTXਟUHG±)RUDQ (*) These features may not be available depending on the model of your TV and the selected country in the First Time Installation. H[DPSOHRIWKHUHTXਟUHPHQWVIRUVWUHDPਟQJ.FRQWHQW\RXPD\IਟQGPRUHਟQIRUPDWਟRQRQWKH1HWIOਟ[ ZHEVਟWH KWWSVKHOSQHWIOਟ[FRPHQQRGH :KHQ\RXVWDUWWRVWUHDPYਟGHRFRQWHQWYਟDWKH ਟQWHUQHWWKHTXDOਟW\RI\RXUFRQQHFWਟRQZਟOOEHDQDO\VHGDQGWKHIXOO+'RU.TXDOਟW\PD\WDNHD VKRUWWਟPHWREHUHDOਟVHGRUਟQWKHHYHQWRIDVORZFRQQHFWਟRQQRWEHSRVVਟEOH

This option is used to select which subtitle mode will be on the screen (DVB subtitle / Subtitle Mode Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is available only for the country option of Norway. Sets the desired time for the TV to automatically go into standby mode when not being Auto TV OFF operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also disable this option by setting as Off. Biss is a satellite signal scrambling system that is used for some broadcasts. If you %ඈVV.H\ need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key and press OK to enter keys on the desired broadcast.

English - 19 - English - 20 - General TV Operation Default CICAM PIN: This option will appear as greyed Press Back/Return button to use available tab options. will become colour-coded and can be selected by out if no CI module is inserted into the CI slot of the Highlight Filter tab and press OK to see the filtering pressing the coloured buttons. Follow the instructions Using the Channel List TV. You can change the default PIN of the CI CAM options. To change the layout highlight Timeline displayed on the screen. using this option. The TV sorts all stored stations in the channel list. You Schedule and press OK. Digital Teletext can edit this channel list, set favourites or set active Note: Default PIN could have been set to 0000 or 1234. If you Event Options Press the Text button to view digital teletext information. stations to be listed by using the Channels menu have defined the PIN(is requested depending on the country Use the directional buttons to highlight an event options. Press the OK button to open the channel list. Operate it with the coloured buttons, cursor buttons selection) during the First Time Installation use the PIN that and press OK button to display Options menu. The You can filter the listed channels or make advanced you have defined. and the OK button. The operation method may differ changes in the current list using the Filter and Edit following options are available. depending on the contents of the digital teletext. Follow Some options may not be available depending on the model Select Channel: Using this option, you can switch tab options. Highlight the tab you want and press OK and/or on the country selection in the First Time Installation. the instructions displayed on the digital teletext screen. to see available options. to the selected channel in order to watch it. The When the Text button is pressed again, the TV returns Electronic Programme Guide Managing the Favourite Lists programme guide will be closed. to television broadcast. By means of electronic programme guide function of More Info: Display detailed information on the selected You can create four different lists of your favourite Software Upgrade your TV you can browse the event schedule of the event. Use up and down directional buttons to scroll channels. Enter the TV>Channels menu or press currently installed channels on your channel list. It through the text. Your TV is capable of finding and updating the firmware the OK button in order to open the Channels menu. depends on the related broadcast whether this feature Set Timer on Event / Delete Timer on Event: Select automatically via the broadcast signal or via Internet. Highlight the Edit tab and press OK to see the editing is supported or not. options and select the Tag/Untag channel option. Set Timer on Event option and press OK. You can set Software upgrade search via user interface To access the programme guide, press the Guide timers for future events. To cancel an already set timer, Select the desired channel on the list by pressing the On the main menu select Settings>System and then OK button while the channel is highlighted. You can button on your remote. You can also use the Guide highlight that event and press the OK button. Then More. Navigate to Software upgrade and press the make multiple choices. You can also use the Tag/ option under TV menu. select Delete Timer on Event option. The timer will Untag all option to select all channels on the list. There are 2 different types of schedule layouts be cancelled. OK button. Then select Scan for upgrade and press OK button to check for a new software upgrade. Then press Back/Return button to return to the Edit available, Timeline Schedule and Now/Next. To Record / Delete Rec. Timer: Select the Record menu options. Select Add/Remove Favourites option switch between these layouts highlight the tab with option and press the OK button. If the event is going If a new upgrade is found, it starts to download the the name of the alternative layout on the upper side and press the OK button again. Favourite channel list to be broadcasted at a future time, it will be added upgrade. After the download is completed, a warning of the screen and press OK. options will be displayed. Set the desired list option to Timers list to be recorded. If the selected event is will be displayed, press OK button to complete software to On. The selected channel/s will be added to the Use the directional buttons to navigate through the being broadcasted at the moment, recording will start upgrade process and restart TV. list. In order to remove a channel or channels from a programme guide. Use the Back/Return button to immediately. favourite list follow the same steps and set the desired use the tab options on the upper side of the screen. 3 AM search and upgrade mode To cancel an already set record timer, highlight that list option to Off. Your TV will search for new upgrades at 3:00 o’clock Timeline Schedule event and press the OK button and select the option if Automatic scanning option is set to Enabled and if You can use the filtering function in the Channels menu In this layout option, all events of the listed channels will Delete Rec. Timer. The record timer will be cancelled. to filter the channels in the channel list permanently be displayed by timeline. You can use the directional IMPORTANT: Connect a USB disk to your TV while the TV the TV is connected to an aerial signal or to Internet. If according to your preferences. For instance, using the buttons to scroll through the list of the events. Highlight is switched off. You should then switch on the TV to enable a new software is found and downloaded successfully, options of the Filter tab, you can set one of your four an event and press OK to display event options menu. the recording feature. it will be installed at the next power on. favourite lists to be displayed every time the channel Press Back/Return button to use available tab options. Notes: You cannot switch to any other channel while there is Note: Do not unplug the power cord while led is blinking during list is opened. an active recording or timer on the current channel. Highlight Filter tab and press OK to see the filtering the reboot process. If the TV fails to come on after the upgrade, Configuring Parental Settings options. To change the layout highlight Now/Next and It is not possible to set timer or record timer for two or more unplug, wait for two minutes then plug it back in. The Parental menu options can be used to prohibit press OK. You can use the Previous Day and Next individual events at the same time interval. All updates are automatically controlled. If a manual search users from viewing of certain programmes, channels Day options to display the events of the previous and Integrated Catch-Up Services is carried out and no software is found then this is the current and using of menus. These settings are located in the next day. version. You can enjoy Freeview Play catch-up TV services Settings> System>Parental menu. Troubleshooting & Tips Highlight Extras tab and press OK to access below that work directly through the electronic programme To display parental lock menu options, a PIN should be options. guide. Whilst you are on a channel use the directional TV will not turn on entered. After coding the correct PIN, Parental menu Highlight Genre: Displays Highlight Genre menu. will be displayed. buttons to scroll back in time through the timeline- Make sure the power cord is plugged in securely to a Select a genre and press OK. The events in the based guide. You will see contents from last few days. programme guide matching the selected genre will wall outlet. Press the Power button on the TV. Menu Lock: This setting enables or disables access Available catch-up contents may change according to all menus or installation menus of the TV. be highlighted. Poor picture to broadcasters and will be marked with a play icon. Guide Search: Displays searching options. Using Maturity Lock: If this option is set, TV gets the maturity Highlight the content you want to play back and press ‡ Check if you have correctly tuned the TV. information from the broadcast and if this maturity level these options, you can search the programme guide the OK button. ‡ Low signal level can cause picture distortion. Please is disabled, prohibits access to the broadcast. database in accordance with the selected criteria. Matching results will be listed. Make sure that your TV is connected to your home check antenna connections. Note: If the country option in the First Time Installation is Now: Displays current event of the highlighted network in order to use the catch-up services. For set as France, Italy or Austria, Maturity Lock’s value will be ‡ Check if you have entered the correct channel channel. further information regarding this matter and other set to 18 as default. frequency if you have performed manual tuning. Zoom: Highlight and press OK to see events in a requirements for Freeview Play services refer to the No picture Child Lock: If this option is set to On, the TV can only wider time interval. Connectivity and Freeview Play Platform sections. be controlled by the remote control. In this case the ‡ TV is not receiving any signal. Make sure the correct Now/Next Schedule Teletext Services control buttons on the TV will not work. source has been selected. In this layout option, only the current and next events Internet Lock: If this option is set to ON, the internet Press the Text button to enter. Press again to activate of the listed channels will be displayed. You can use ‡ Is the antenna connected properly? using applications will be disabled. Set to OFF to mix mode, which allows you to see the teletext page release these applications again. the directional buttons to scroll through the list of the and the TV broadcast at the same time. Press once ‡ Is the antenna cable damaged? events. Set PIN: Defines a new PIN number. more to exit. If available, sections in the teletext pages ‡ Are suitable plugs used to connect the antenna?

English - 21 - English - 22 - ‡ If you are in doubt, consult your dealer. 7 1024x768 60Hz Supported File Formats for USB Mode No sound 8 1024x768 70Hz Video File Formats ‡ Check if the TV sound is muted. Press the Mute 9 1024x768 75Hz button or increase the volume to check. 10 1152x864 75Hz Extension Video Codec Max. Resolution & Frame Rate & Bit Rate ‡ Sound may be coming from only one speaker. Check 11 1280x768 60Hz .mpg, .mpeg, .dat, .vob the balance settings from Sound menu. 12 1360x768 60Hz MPEG1/2, H.264, VC1 .ts, .trp, .m2ts Remote control - no operation 13 1280x960 60Hz .avi MPEG1/2, MPEG4, H.264, MJPEG ‡ The batteries may be exhausted. Replace the 14 1280x1024 60Hz batteries. .mp4, .m4a, .m4v, .mov, .qt,  1280x1024 75Hz MPEG1/2, H.263, MPEG4, H.264 .3gp, .3g2, .3gpp ‡ The batteries maybe inserted incorrectly. Refer to 16 1400x1050 60Hz the section “Inserting the Batteries into the Remote”. .mkv MPEG 1/2, MPEG4, H.264 17 1440x900 60Hz .flv Sorenson Sp, MPEG4, H.264 H.264: 1080Px2@30fps - 50Mbps, 1080P@60fps - No signal on an input source 18 1440x900 75Hz 50Mbps Other: 1080P@60fps - 50Mbps ‡ It is possible that no device is connected. 19 1920x1080 60Hz .ogm, .ogg MPEG1/2, MPEG4 ‡ Check the AV cables and connections from your .asf, .wmv MPEG4, WMV3, VC1 device. AV and HDMI Signal Compatibility .rm, .rmvb RV30, RV40 ‡ Check the device is switched on. Source Supported Signals Available .webm VP9, VP8 The Image is not centered in VGA source PAL O .mp4, .mov, .3gpp, .3gp, To have your TV automatically center the image, enter SECAM O MPEG transport stream, HEVC/H.265 the PC Position menu in Picture menu, highlight Back AV .ts,.trp, .tp, .mkv Autoposition and press OK. Wait for it to finish. In NTSC4.43 O order to set the position of the image manually you NTSC3.58 O Picture File Formats can use H Position and V Position options. Select 480i, 480p 60Hz O the desired option and use Left and Right directional Extension Specification Resolution (width x height) buttons on the remote to set. 576i, 576p 50Hz O YPbPr Baseline 8192 x 8192 Recording unavailable 720p 50Hz,60Hz O .jpg, .jpeg Progressive 3000 x 3000 To record a programme, you should first correctly 1080i 50Hz,60Hz O connect a USB storage device to your TV, while the RGB 1/4/8/16/24/32 bit 480i, 480p 60Hz O .bmp TV is switched off. You should then switch on the TV to RLE 4/8 bit enable recording feature. If you cannot record, check 576i, 576p 50Hz O the storage device is correctly formatted and there is 87a 720p 50Hz,60Hz O .gif sufficient space. 89a (Only 1 picture at animation format) 1080i 50Hz,60Hz O USB is too slow HDMI Grayscale, 24/32 bit per pixel 8192 x 8192 If a “USB disk writing speed too slow to record” .png Interlace format message is displayed on the screen while starting a 24Hz, 25Hz, recording, try restarting the recording. If you still get 1080p 30Hz, 50Hz, O Progressive 60Hz the same error, it is possible that your USB storage .tiff, .tif Tagged image file format device does not meet the speed requirements. Try Lossy compression VP8 key frame version number support 0~3 using a different USB storage device. (X: Not Available, O: Available) .webp Lossless compression PC Input Typical Display Modes In some cases a signal on the TV may not be displayed properly. The problem may be an inconsistency with The following table is an illustration of some of the Audio File Formats typical video display modes. Your TV may not support standards from the source equipment (DVD, Set-top all resolutions. box, etc. ). If you do experience such a problem please Extension Format contact your dealer and also the manufacturer of the Index 5HVROXWඈRQ Frequency source equipment. .mp3 .mp3 1 640x480 60Hz .ac3 .ac3 2 640x480 75Hz .aac .AAC .wma .WMA 3 800x600 56Hz .amr .AMR-NB, .AMR-WB 4 800x600 60Hz .wav . MPEG La, .AAC, .PCM  800x600 72Hz .flac . FLAC 6 800x600 75Hz

English - 23 - English - 24 - Subtitle File Formats Connectivity Internet Speed Test Highlight Internet Speed Test and press the OK Wired Connectivity External Subtitles button. TV will check the internet connection bandwidth To Connect to a Wired Network and display the result when complete. Extension Specification ‡ You must have a modem/router connected to an Advanced Settings .ssa SubStation Alpha DFWඈYHEURDGEDQGFRQQHFWඈRQ Highlight Advanced Settings and press the OK .ass Advanced SubStation Alpha ‡&RQQHFW \RXU79 WR \RXU PRGHPURXWHU YඈD DQ button. On the next screen you can change the IP and .srt Subripper (WKHUQHW FDEOH7KHUH ඈV D /$1 SRUW DW WKH UHDU DNS settings of the TV. Highlight the desired one and (back) of your TV. press Left or Right button to change the setting from .sub Micro DVD / SubViewer Automatic to Manual. Now you can enter the Manual .sub + .idx VOBSub IP and / or Manual DNS values. Select the related item  in the drop down menu and enter the new values using .txt Micro DVD / TMPlayer / MPL2 the numeric buttons of the remote. Highlight Save and .mpl MPL2 press the OK button to save settings when complete. .smi Sami Wireless Connectivity .jss JACOSUB To Connect to a Wireless Network .ttml TTML  The TV cannot connect to the networks with a hidden SSID. To make your modem’s SSID visible, you should .txt / .sub DVDSUBTITLE change your SSID settings via the modem’s software. .lrc -  Internal Subtitles  Extension Specification 1. Broadband ISP connection .mkv VOBSub 2. LAN (Ethernet) cable .mkv ASS / SSA / TEXT .dat, .mpg, .mpeg, .vob DVD Subtitle 3. LAN input on the rear side of the TV .mp4 DVD Subtitle, TEXT 7RFRQIඈJXUHZඈUHGVHWWඈQJVUHIHUWRWKH1HWZRUN VHFWඈRQඈQWKH Settings menu. Supported DVI Resolutions ‡

English - 25 - English - 26 - ‡ 7KHORFDWඈRQZKHUHWKHWUDQVPඈVVඈRQඈVPRVWHIIHFWඈYH  &RQQHFW\RXU79WR\RXUURXWHUIROORZඈQJWKHVWHSV Wireless Display Image transfer and audio streaming GඈIIHUVGHSHQGඈQJRQWKHXVDJHHQYඈURQPHQW PHQWඈRQHGඈQWKHVHFWඈRQVDERYH Wireless Display is a standard for streaming video and You can also use this type of connection to transfer ‡ 7KH:ඈUHOHVVIHDWXUHRIWKH79VXSSRUWVDEJ  $IWHUZDUGVFRQQHFW\RXUPREඈOHGHYඈFHWRWKHURXWHU sound content. This feature provides the ability to use images or stream audio from your mobile device to  Q W\SH PRGHPV ,W ඈV KඈJKO\ UHFRPPHQGHG WKDW DQGWKHQDFWඈYDWHWKHVKDUඈQJVRIWZDUHRQ\RXUPREඈOH your TV as wireless display device. your TV. \RX VKRXOG XVH WKH ,((( Q FRPPXQඈFDWඈRQ GHYඈFH7KHQVHOHFWIඈOHVWKDW\RXZDQWWRVKDUHZඈWK Using with mobile devices Pair the mobile device and the TV as described before. SURWRFRO ඈQ RUGHU WR DYRඈG DQ\ SRVVඈEOH SUREOHPV your TV. Start a device search in your hand-held device. Select ZKඈOHZDWFKඈQJYඈGHRV  ,I WKH FRQQHFWඈRQ ඈV HVWDEOඈVKHG FRUUHFWO\\RX ZඈOO There are different standards which enable sharing of your TV from listed devices. Confirm the request for ‡ You must change your modem’s SSID when there EHDEOHWRDFFHVVWKHVKDUHGIඈOHVඈQVWDOOHGRQ\RXU screens including graphical, video and audio content connection on your TV screen and do the same on DUHDQ\RWKHUPRGHPVDURXQGZඈWKWKHVDPH66,' PREඈOH GHYඈFH YඈD WKH$96 DXGඈR YඈGHR VKDUඈQJ  between your mobile device and TV. your hand held device screen. If no pairing is done, Sound menu, for remote controllers the Wake On feature with a better performance, please Smart Remote option in the Settings>System>More ‡ 7U\VHDUFKඈQJIRUZඈUHOHVVQHWZRUNVDJDඈQXVඈQJWKH 2WKHU,QIRUPDWඈRQ make sure that your device has latest firmware version. menu. Select the menu option and press the OK button Network menu screen. 7KH VWDWXV RI WKH FRQQHFWඈRQ ZඈOO EH GඈVSOD\HG DV If you want your TV to consume less power in standby to open the related menu. Using this menu you can If the wireless network does not function properly, try Connected or Not Connected and the current IP mode, you can disable this feature by setting the Wake discover and connect the devices that use the same using the wired network in your home. Refer to the DGGUHVVඈIDFRQQHFWඈRQඈVHVWDEOඈVKHG On option as Off. wireless technology and start to use them. Follow the Wired Connectivity section for more information on &RQQHFWඈQJWR\RXUPREඈOHGHYඈFHYඈDWLAN on-screen instructions. Start the device discovery. A the process. list of available wireless devices will be displayed. ,IWKH79GRHVQRWIXQFWඈRQXVඈQJWKHZඈUHGFRQQHFWඈRQ ‡ ,I\RXUPREඈOHGHYඈFHKDVWLAN feature, you can Select the device you want to connect from the list and check the modem (router). If the router does not have a FRQQHFWඈWWR\RXU79YඈDDURXWHUඈQRUGHUWRDFFHVV press the OK button to connect. If “Device connected” SUREOHPFKHFNWKHඈQWHUQHWFRQQHFWඈRQRI\RXUPRGHP WKH FRQWHQW ඈQ \RXU GHYඈFH )RU WKඈV \RXU PREඈOH message is displayed, the connection is successfully GHYඈFHPXVWKDYHDQDSSURSUඈDWHVKDUඈQJVRIWZDUH established. If the connection fails try it again.

English - 27 - English - 28 - Connection is Slow &RQQHFWWRD:ඈUHGRU:ඈUHOHVV1HWZRUN Freeview Play Platform Name and Address, highlight OK and press the OK See the Wired/Wireless Connectivity chapters for button to add. Whilst you are on the site you wish to 6HHWKHඈQVWUXFWඈRQERRNRI\RXUZඈUHOHVVPRGHPWR Freeview Play platform provides catch-up TV and JHWඈQIRUPDWඈRQRQWKHඈQWHUQDOVHUYඈFHDUHDFRQQHFWඈRQ detailed configuration information. add to the Speed Dial list, highlight the Vewd button On Demand services. Simply press the Freeview and press the OK button. Then highlight Add to Speed VSHHGVඈJQDOTXDOඈW\DQGRWKHUVHWWඈQJVSystem>More menu and Freeview Play platform. again. Name and Address will be filled automatically Disruption during playback or slow reactions enable the AVS option. The Freeview Play platform can also be accessed from according to the site you are visiting. Highlight OK and You could try the following in such a case: 3OD\6KDUHG)ඈOHVYඈD0HGඈD%URZVHU the Home and Apps menus. Press Menu button and press the OK button to add. Keep at least three meters distance from microwave +ඈJKOඈJKWWKHAVSRSWඈRQඈQWKHSources menu by using select Home or Apps. Then highlight Freeview Play You can also use the Vewd menu options to manage ovens, mobile telephones, bluetooth devices or any the directional buttons and press OK. $YDඈODEOHPHGඈD and press the OK button. the browser. Highlight the Vewd button and press the other WLAN compatible devices. Try changing the VHUYHUGHYඈFHVඈQWKHQHWZRUNZඈOOEHOඈVWHG6HOHFWRQH You will have to agree to the terms and conditions for OK button to see available page specific and general active channel on the WLAN router. and press OK WR FRQWඈQXHThe media browser will Freeview Play services first if you did not agree them options. Internet Connection Not Available / $XGඈR9ඈGHR then be displayed. during the First Time Installation. Highlight Yes and 6KDUඈQJ Not Working There are various ways to search or visit websites Refer to the Media Browser menu section for further press OK on the remote to confirm and proceed. using the web browser. ,IWKH0$&DGGUHVV DXQඈTXHඈGHQWඈIඈHUQXPEHU RI\RXU information on file playback. Integrated TV Player applications will be displayed. 3&RUPRGHPKDVEHHQSHUPDQHQWO\UHJඈVWHUHGඈWඈV Enter the address of a website(URL) into the search/ If a problem occurs with the network, switch your Select one and press the OK button. Then select a SRVVඈEOHWKDW\RXU79PඈJKWQRWFRQQHFWWRWKHඈQWHUQHW address bar and highlight the Submit button on the television off at the wall socket and back on again. content that you want to play back and press the OK ,Q VXFK D FDVH WKH 0$& DGGUHVV ඈV DXWKHQWඈFDWHG virtual keyboard and press the OK button to visit the Trick mode and jump are not supported with the $XGඈR button to watch. HDFKWඈPHZKHQ\RXFRQQHFWWRWKHඈQWHUQHW7KඈVඈVD site. 9ඈGHR6KDUඈQJ feature. SUHFDXWඈRQDJDඈQVWXQDXWKRUඈ]HGDFFHVV6ඈQFH\RXU Catch-up contents can also be accessed and played Enter keyword/s into the search/address bar and 79KDVඈWVRZQ0$&DGGUHVV\RXUඈQWHUQHWVHUYඈFH PC/HDD/Media Player or any other devices that are back directly from the TV Guide. Refer to the section highlight the Submit button on the virtual keyboard SURYඈGHUFDQQRWYDOඈGDWHWKH0$&DGGUHVVRI\RXU79 compatible should be used with a wired connection for Electronic Programme Guide for more information. and press the OK button to start a search for the )RUWKඈVUHDVRQ\RXU79FDQQRWFRQQHFWWRWKHඈQWHUQHW higher playback quality. Requirements related websites. &RQWDFW \RXU ඈQWHUQHW VHUYඈFH SURYඈGHU DQG UHTXHVW Use a LAN connection for quicker file sharing between The Freeview Play services may only be used if the Highlight a Speed Dial thumbnail and press the OK ඈQIRUPDWඈRQRQKRZWRFRQQHFWDGඈIIHUHQWGHYඈFHVXFK other devices like computers. following requirements are fulfilled: button to visit the related website. DV\RXU79WRWKHඈQWHUQHW Note: There may be some PC’s which may not be able to ‡ Connecting the TV to the internet. A minimum broad- Your TV is compatible with USB mice. Plug your mouse ,W ඈV DOVR SRVVඈEOH WKDW WKH FRQQHFWඈRQ PD\ QRW EH utilize the $XGਟR9ਟGHR6KDUਟQJ feature due to administrator band speed of 2Mbps is required for proper operation or wireless mouse adaptor into the USB input of your and security settings (such as business PC’s). DYDඈODEOHGXHWRDIඈUHZDOOSUREOHP,I\RXWKඈQNWKඈV of catch up and on demand services. TV for easier and quicker navigation. FDXVHV \RXU SUREOHP FRQWDFW \RXU ඈQWHUQHW VHUYඈFH Apps SURYඈGHU$IඈUHZDOOPඈJKWEHWKHUHDVRQRIDFRQQHFWඈYඈW\ ‡ Agreeing to the terms and conditions of Freeview Some web pages include flash content. These are not You can access the applications installed on your TV DQGGඈVFRYHU\SUREOHPZKඈOHXVඈQJWKH79ඈQ$XGඈR Play supported by the browser. from Apps menu. Highlight an app and press OK to 9ඈGHR6KDUඈQJPRGHRUZKඈOHEURZVඈQJYඈD$XGඈR9ඈGHR Note: Freeview Play platform usage will count towards any Your TV does not support any download processes launch. 6KDUඈQJIHDWXUH monthly broadband data allowance. Only selected channels from the internet via the browser. In order to manage the apps installed on your TV, add provide 7-day catch up. Invalid Domain All sites on the internet might not be supported. new apps from the market or to see all available apps Internet Browser According to the site; content problems may occur. (QVXUHWKDW\RXKDYHDOUHDG\ORJJHGRQWR\RXU3&ZඈWK in full screen mode highlight the Add More option To use the internet browser, enter the AppsPHQXIඈUVW In some circumstances video contents might not be DQDXWKRUඈ]HGXVHUQDPHSDVVZRUGDQGDOVRHQVXUH and press OK. Using this menu option you can add 7KHQ ODXQFK WKH ඈQWHUQHW EURZVHU DSSOඈFDWඈRQ ZKඈFK able to be played. WKDW\RXUGRPDඈQඈVDFWඈYHSUඈRUWRVKDUඈQJDQ\IඈOHVඈQ an installed app to Home menu, launch or remove it. KDVDQRUDQJHFRORXUHGORJRZඈWKHDUWKV\PERORQඈW \RXUPHGඈDVHUYHUSURJUDPRQ\RXU3&,IWKHGRPDඈQ Removed apps will no longer be accessible from Apps HBBTV System In the initial screen of the browser, the thumbnails of ඈVඈQYDOඈGWKඈVPඈJKWFDXVHSUREOHPVZKඈOHEURZVඈQJ menu. You can also add new apps from the market. HbbTV (Hybrid Broadcast Broadband TV) is a new the predefined (if any) links to web sites available will IඈOHVඈQ$XGඈR9ඈGHR6KDUඈQJPRGH In order to enter the market highlight the shopping industry standard that seamlessly combines TV be displayed as Speed Dial options along with the Using Audio Video Sharing Network Service basket logo located on the upper left side of the screen services delivered via broadcast with services delivered and press OK. Available apps in the market will be Edit Speed Dial and the Add to Speed Dial options. $XGඈR 9ඈGHR 6KDUඈQJ IHDWXUH XVHV D VWDQGDUG WKDW via broadband and also enables access to Internet only displayed. Use directional buttons to highlight an app To navigate the web browser, use the directional HDVHVWKHYඈHZඈQJSURFHVVRIGඈJඈWDOHOHFWURQඈFVDQG services for consumers using connected TVs and set- and press OK. Highlight Add to Apps option and press buttons on the remote or a connected mouse. To see PDNHV WKHP PRUH FRQYHQඈHQW WR XVH RQ D KRPH top boxes. Services delivered through HbbTV include OK again to add the selected app to Apps menu. the browser options bar, move the cursor to the top of network. traditional broadcast TV channels, catch-up services, the page or press the Back/Return button. History, video-on-demand, electronic programme guide, 7KඈV VWDQGDUG DOORZV \RX WR YඈHZ DQG SOD\ SKRWRV For quick access to Add More menu you can press the Tabs and Bookmarks options and the browser bar interactive advertising, personalisation, voting, games, PXVඈFDQGYඈGHRVVWRUHGඈQWKHPHGඈDVHUYHUFRQQHFWHG Internet button on the remote, if this button is available. which contains previous/next buttons, the refresh social networking and other multimedia applications. to your home network. Notes: button, the address/search bar, the Speed Dial and HbbTV applications are available on channels where 1. Server Software Installation Possible application dependent problems may be caused by the Vewd buttons are available. the content service provider. they are signalled by the broadcaster (currently various The $XGඈR9ඈGHR6KDUඈQJ feature cannot be used if the To add a desired website to the Speed Dial list for channels on Astra broadcast HbbTV applications). The server programme is not installed onto your PC RUඈI Third party internet services may change, be discontinued or restricted at any time. quick access, move the cursor to the top of the page broadcaster marks one application as “autostart” and WKHUHTXඈUHGPHGඈDVHUYHUVRIWZDUHඈVQRWඈQVWDOOHGRQWR or press the Back/Return button. The browser bar this one is started by the platform automatically. The WKHFRPSDQඈRQGHYඈFH. Prepare your PC with a proper will appear. Highlight the Speed Dial - button and autostart applications are generally launched with a server programme. press the OK button. Then select Add to Speed Dial small red button icon to notify the user that there is option and press the OK button. Fill in the blanks for an HbbTV application on that channel. Press the red

English - 29 - English - 30 - button to open the application page. After the page is IMPORTANT: Make sure the TV and mobile device Change TV (Only in IOS): Shows the currently Note: Not all image file formats are supported. This function displayed you can go back to the initial red button icon are connected to the same network. connected TV. You can press on this setting to go to will not work if Audio Video Sharing feature is not supported. state by pressing the red button again. You can toggle For media sharing feature Audio Video Sharing option the “TV search” screen and change to a different TV. Smart Remote Feature between the red button icon mode and full UI mode should be enabled(if available). Press the Menu button Edit custom channel list: You can edit your custom You can use your mobile device as a remote control of the application via pressing red button. It should on the remote, select Settings>System>More menu channel list using this setting. for your TV once it has connected to the TV. To use be noted that the red button switching capability is and press OK. Highlight AVS and change as Enabled. Choose channel list source: You can choose the smart remote’s full features tap on the Up-arrow on provided by the application and some application may Your TV is ready to connect to your mobile device now. the bottom left side of the screen. behave differently. channel list source to be used in the application. The Install the Smart Center application onto your mobile options are “TV List” and “Custom List”. Additionally Voice Recognition If you switch to another channel while an HbbTV device. application is active (either in red button icon mode you can activate “Remember my choice” option to You can tap on the Microphone( ) widget and Start the Smart Center application. If all connections or full UI mode), the following scenarios can occur. set the selected channel list source as a constant manage your application, giving voice commands are configured properly, you will see your TV’s name on choice. In this case if the selected source is available ‡ The application can continue running. such as “Volume Up/Down!”, “Programme Up/Down!”. your mobile device. If your TV’s name doesn’t appear it will be used in the application. ‡ The application can be terminated. on the list, wait a while and tap on the Refresh widget. Note: This feature is only for android based devices available. Version No: Displays the current version of the Select your TV from the list. Keyboard Page ‡ The application can be terminated and another application. autostart red button application can be launched. Mobile Device screen The keyboard page can be opened in two ways; by Detail Page HbbTV allows the applications to be retrieved both from On the main screen you can find tabs to access pressing the Keyboard( ) widget on the application To open detail page tap on a programme. On the broadband or broadcast. The broadcaster may enable various features. screen or automatically by receiving a command detail page screen you can get detailed information both ways or one of them. If the platform does not have from the TV. The application retrieves actual channel list from TV of the programmes you select. There are “Details”, an operational broadband connection, the platform Requirements first when it starts. “Cast&Crew” and “Videos” tabs to find on this page. can still launch applications transmitted on broadcast. 1. Smart TV MY CHANNELS: The programmes of first four DETAILS: This tab provides summary and information The autostart red button applications generally provide channels from the channel list retrieved from the TV about the selected programme. Also there are links 2. Network connection links to other applications. The user then can switch are shown. You can change the listed channels. Press to Facebook and twitter pages of the programme to other applications by using the links provided. 3. Mobile Device based on Android or iOS platform on the channel thumbnail and hold. A list of channels selected. (Android OS 4.0 or higher; IOS 6 or higher version) The applications should provide a way to terminate will be displayed and you can choose your desired CAST&CREW: Shows all the people contributed to themselves, usually Exit button is used for this. channel to be replaced. 4. Smart Center app.(to be found on online the current programme. application stores based on Android and iOS HbbTV applications use keys on the remote control to TV: You can watch content through the TV tab. In VIDEOS: Provides videos on YouTube related to the platforms) interact with the user. When an HbbTV application is this mode you can navigate through the channel list selected programme. launched, the control of some keys are owned by the retrieved from your TV and click on thumbnails to view  Router modem application. For example, numeric channel selection the detail pages. Note: For some functions an internet connection may be 6. USB storage device in FAT32 format (required for may not work on a teletext application where the required. USB Recording feature, if available) RECORDINGS: You can view your active recordings(if numbers indicate teletext pages. FollowMe TV Feature (if available) available) and reminders through this tab. To delete Notes:)RU$QGURਟGGHYਟFHV1RUPDO PGSਟ /DUJH KGSਟ DQG HbbTV requires AV streaming capability for the Tap on the FOLLOW ME TV widget located at the any item, simply press on the delete icon found on ([WUD/DUJH [KGSਟ VFUHHQVਟ]HVDUHVXSSRUWHG'HYਟFHVZਟWK platform. There are numerous applications providing bottom left of the screen of your mobile device to each row. ´RUVPDOOHUVFUHHQVਟ]HVDUHQRWVXSSRUWHG VOD (video on demand) and catch-up TV services. change the layout for FollowMe TV feature. The user can use play, pause, stop, forward, and EPG(Electronic programme guide): You can view )RUਟ26GHYਟFHVDOOVFUHHQVਟ]HVDUHVXSSRUWHG the broadcast schedules of selected channel lists Tap the play icon to start streaming of the content from rewind keys on the remote control to interact with the User interface of the Smart Center application is subject to through this tab. You can also navigate through the TV to your mobile device. Available if your device AV content. change according to version installed on your device. channels by pressing on the selected channel on the is in your routers operation range. Note: You can enable or disable this feature from the EPG grid. Please note that updating / refreshing the DVB functionality information More menu in Settings>System menu. Depending on the Mirror Mode EPG information may take a while depending on your This DVB receiver is only suitable for use in the country model of your TV and the selected country option in the This mode of FollowMe TV feature is enabled by network and web service quality. which it was designed to be used in. First Time Installation this feature might be available in the default and allows streaming the content from any other Settings>System>Privacy Settings menu instead of the Note: Internet connection is required for WEB based EPG selected TV sources and Media Browser. Although this DVB receiver conforms to the latest DVB Settings>System>More menu. information. Notes: Note that only digital(DVB-T/C/S) SD and HD channels specifications at the time of manufacture, we cannot Smart Center SETTINGS: Configure the application to your liking. are supported. guarantee compatibility with future DVB transmissions You can change; due to changes that may be implemented in broadcast Smart Center is a mobile application running on iOS Multilanguage audio support and subtitle on/off features are and Android platforms. With your tablet or phone, Auto-lock (Only in IOS): The screen of the device not functional. signals and technologies. you can easily stream your favourite live shows and automatically turns off after a certain amount of The streaming performance may change depending on the Some digital television functions may not be available programmes from your smart TV. Also; you can launch time. Default is off, which means the screen will quality of your connection. in all countries. your applications, use your tablet as a remote control always stay on. We continually strive to improve our products; for your TV and share media files. Media Share Page Auto-enable FollowMeTV: FollowMeTV function (if therefore, specifications may change without prior Note: Being able to use all functions of this application available) will start automatically when this setting To access the Media Share widget tap on the Up- notice. depends on the features of your TV. arrow on the bottom left side of the screen. is enabled. Default is disabled. For advice on where to purchase accessories, Getting Started Auto-connection to TV: When enabled, your If the Media Share widget is pressed, a screen is please contact the store where you purchased your To be able to use internet based features, your modem/ mobile device will automatically connect to last displayed where you can select the media file type to equipment. router must be connected to the internet. connected TV and skips the TV search screen. share with your TV. English - 31 - English - 32 - A VESA WALL MOUNT MEASUREMENTS

,ŽůĞWĂƩĞƌŶ WH B Sizes (mm) 75 75

C ^ĐƌĞǁ^ŝnjĞƐ

min. (mm) 7 D >ĞŶŐƚŚ;yͿ max. (mm) 8

E dŚƌĞĂĚ;zͿ M4

WƌŽĚƵĐƚ&ŝĐŚĞ

ŽŵŵĞƌĐŝĂůƌĂŶĚ͗tĂůŬĞƌ

WƌŽĚƵĐƚEŽ͘ 10129068

DŽĚĞůEŽ͘ 32WPS20PWH

ŶĞƌŐLJĞĸĐŝĞŶĐLJĐůĂƐƐ A+

sŝƐŝďůĞƐĐƌĞĞŶƐŝnjĞ ϯϮŝŶĐŚĞƐ 80 cm ;ĚŝĂŐŽŶĂů͕ĂƉƉƌŽdž͘Ϳ;ŝŶĐŚͬĐŵͿ KŶŵŽĚĞĂǀĞƌĂŐĞƉŽǁĞƌ ϯϭ͕Ϭ ĐŽŶƐƵŵƉƟŽŶ;tĂƩͿ ŶŶƵĂůĞŶĞƌŐLJĐŽŶƐƵŵƉƟŽŶ 45 ;ŬtŚͬĂŶŶƵŵͿ;ΎͿ ^ƚĂŶĚďLJƉŽǁĞƌĐŽŶƐƵŵƉƟŽŶ Ϭ͕ϱϬ ;tĂƩͿ KīŵŽĚĞƉŽǁĞƌĐŽŶƐƵŵƉƟŽŶ Eͬ ;tĂƩͿ

ŝƐƉůĂLJƌĞƐŽůƵƟŽŶ;ƉdžͿ ϭϯϲϲdžϳϲϴ

(*) Energy consumption kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

+HUHE\9(67(/(OHNWURQLN6DQD\LYH7LFDUHW$ùGHFODUHVWKDWWKHUDGLRHTXLSPHQWW\SH7)7 IDTV is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: doc.vosshub.com English - 33 -