Step 2: Program your remote 4. Press and hold the device key you want to program. Direct Code Entry Auto Code Search 6. When your device turns off, press The POWER key serves as an indicator light during NOTES CHAN and VOL keys act as channel and volume controllers. Note: All TV codes begin with the number 1; all VCR • There is a possibility that a programmed code may only be Limited Lifetime Warranty While you’re holding down the device key, use your Direct Code Entry lets you enter a code from the The Auto Code Search goes automatically through all the the REVERSE key on the remote programming, giving you feedback at each stage of the Throughout the programming of each key, keep the The CHAN keys also provide skip forward and skip back and DVR codes begin with the number 2; all DVDs, able to control some of your device features (for example, process. only turns a device on and off). To confi rm that the device other hand to press and hold the remote’s POWER key accompanying code list for your brand of device. It’s not as codes for the device you’re trying to control. When you fi nd and wait at least 2 seconds. remote pointed at the IR sensor of the device you are control for DVD players and DVRs that support this the number 3; and all satellite receivers, cable boxes, To use this universal remote with your home entertainment key is programmed with the correct code for maximum at the same time. easy as the other methods, but it’s potentially the fastest the one that operates your device, you can stop the search The remote tries the last of the The Manual Code Search method may take a long time programming the remote to control. functionality. streaming players, and DTV converters, the number 5. functionality, test the device. Attempt to control a variety VOXX Accessories Corporation (the “Company”) warrants to you the system, fi rst you need to program it to control your devices. previous ten codes. because the remote searches through all of the codes in original retail purchaser of this product that should it, under normal use method. and store that code. GO BACK exits remote programming; it also performs the 5. Repeat step 4 until you have retrieved all fi ve numbers of the device’s functions with the remote. If some of the There are four ways you can program the universal remote its memory one-by-one. If your brand is listed in the Brand Test the remote with the device to make sure the and conditions, be proven defective in material or workmanship during Did your device turn on? device key is programmed with the correct code for same functions as on your original remotes. in the code. After the fi fth number is retrieved, the features of your devices don’t work, try programming the Universal Remote Control to operate your devices. Try them in the order listed here: TIP: Each device key is associated with a type of device—the Codes or the Code Lists, fi rst try the Brand Code Search or its lifetime while you own it, such defect(s) will be repaired or replaced TIPS: Each device key is associated with a type maximum functionality. If some features don’t work, try POWER key blinks briefl y, then turns off. remote with a different code in the list using the Direct Code (at the Company’s option) without charge for parts and repair labor. TV is preset to search for TVs, SAT•CBL•STREAM for YES: Press the STOP key. You’re the Direct Code Entry method. • The Brand Code Search searches through the codes of device—the TV is preset to search for TVs, a different code. See the “Testing the Code for Maximum The INPUT and — (dash) key has three functions: (1) it Entry Method, until you fi nd the code that allows the remote To obtain repair or replacement within the terms of this Warranty, the Owner’s Manual satellite receivers, cable boxes, digital TV converters, or done! You’ve programmed this TIP: To exit the Code Retrieval Mode at any time, press for select brands of devices. SAT•CBL•STREAM for satellite receivers, cable boxes, To exit without saving a new code at any point in the Functionality” section below for more information. toggles through all the video sources connected to your TV; to control the majority of your device’s functions. Different product is to be delivered with proof of warranty coverage (e.g. dated bill streaming media players, and DVD•VCR for VCRs or DVD device key. the GO BACK key. RCR314WR / RCR313BR digital TV converters, or streaming media players, and Manual Code Search, press the GO BACK key. (2) when the remote is in VCR mode, this button toggles codes can provide different levels of functionality. of sale), specifi cation of defect(s), transportation prepaid, to the Company • The Direct Code Entry lets you enter a code from the players. During the Manual Code Search, the remote ignores between VCR and the TV input; (3) when you’re entering Note: If you press an invalid key during the Code at the address shown below. Manual del Propietario (parte posterior) DVD•VCR for VCRs or DVD players. keypresses that aren’t part of the search. accompanying code list for your brand of device. The POWER key serves as an indicator light during NO: Press REVERSE again. The remote tests the next digital channel numbers directly, this button lets you Retrieval process, the remote will not respond. If Problem: The POWER key does not light when you press a This Warranty does not cover product purchased, serviced or used 5. Wait until the POWER key comes on and stays on. To exit without saving a new code at any point in the you do not press a valid Code Retrieval key (TV, outside the United States or Canada. This Warranty is not transferable programming, giving you feedback at each stage of the code in the batch. 1. Manually turn on the device you The search times out after two minutes (the POWER key separate the main channel number from the sub-channel key. FCC Statement: • The Auto Code Search goes automatically through all Then release both keys. Auto Code Search, press the GO BACK key. SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), and does not extend to costs incurred for installation, removal or process. want to control. blinks four times and turns off, and the last programmed number (such as 59.1). • You may have pressed an invalid key for the mode the This device complies with part 15 of the FCC Rules. Operation is subject the codes for the device you’re trying to control. Keep pressing REVERSE every 2 seconds until your Code Retrieval times out after 15 seconds. The POWER reinstallation of the product. This Warranty does not apply if in the to the following two conditions: (1) This device may not cause harmful device turns back on. When it does, press STOP. code under that device key is retained). remote is in. Company’s opinion, the product has been damaged through alteration, interference, and (2) this device must accept any interference received, 1. Manually turn on the device you key blinks four times, and then turns off. • The Manual Code Search lets you manually go 6. Look at the number you circled for 1. Manually turn on the device you • Make sure the remote is in the correct mode by pressing improper installation, mishandling, misuse, neglect, accident, or the including interference that may cause undesired operation. want to control. Note: If you accidentally press the REVERSE key after The POWER key blinks four times and turns off when the IMPORTANT Note: This equipment has been tested and found to comply with the through all the codes for the device you’re trying to your device’s brand code number. want to control. the corresponding device key (TV, SAT•CBL•STREAM, simultaneous use of different battery types (e.g. alkaline, standard or your device turns on, press the FORWARD key. Then, wait remote has gone through all the codes. The remote exits rechargeable). limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Press that number on the remote DVD•VCR). This tells the remote which device to operate. These limits are designed to provide reasonable protection against control. the Manual Code Search. If your device hasn’t turned off Because this remote controls more than one device, TV CODE SAT•CBL•STREAM CODE two seconds to see if your device turns off again. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY harmful interference in a residential installation. This equipment keypad. If you’re programming the TV or yet, try a different search method. • Make sure the batteries are fresh and are properly installed. generates, uses and can radiate radio frequency energy and, if not 2. you must fi rst “tell” the remote which device you wish IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE Replace the batteries with two new AA batteries, if necessary installed and used in accordance with the instructions, may cause NOTES SAT•CBL•STREAM key, go to step 3. to operate. That means, if you wish to operate your TV, 1 5 AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE harmful interference to radio communications. However, there is no Brand Code Search (see the Battery Installation section). Admiral ...... PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. Advent ...... Aiko ...... you must fi rst press the TV key to put the remote in the Akai ...... 10812, 11675, 10060, Albatrona Action ...... If you’re programming the TV or Americ...... 2. guarantee that interference will not occur in a particular installation. If ...... 10156, 107 Anam AOC ...... If you’re programming the DVD•VCR key, you need Find the Code List that came with Apex Digital The Brand Code Search goes through only the codes for one 2. Code Lists Audiovox ...... 10451, 10180, 10 ...... 10875, 1 Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... this equipment does cause harmful interference to radio or television Brand Codes are used for programming using the Brand Code Search ...... Throughout the programming of each key, be sure to BenQ ...... TV Mode. The remote stays in that device mode until This Warranty is in lieu of all other express warranties or liabilities. ANY Bradford ...... arcas son utilizados para programar utilizando SAT•CBL•STREAM key, go to step 3. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... to tell the remote which kind of device you want this Testing the Code for Maximum Functionality SAT CABLE DTV CONVERTER Los códigos de las m Carver Point the remote directly at the io the remote. Locate the section for los métodos de búsqueda y entrada de códigos de marcas, resaltado Celera ...... of the select brands listed in the accompanying code list. If anghong ...... reception, which can be determined by turning the equipment off and 7. Ch Citizen ...... Problem: The remote will not change channels on device. TV ony Toshiba Viz Brand Code List/Lista de Códigos de Marcas Clarion Commercial Solutions ...... IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF Concerto ...... keep the remote pointed at the IR sensor of the device you press a different device key. For example, if your Contec ...... STREAMING PLAYER Panasonic Samsung Sharp S Magnavox Craig ...... Philips Crosleyn ...... s ...... JVC w on, the user is encouraged to try to correct the interference by one or Cro RCA Insignia Curtis Mathe key to control, VCR or DVD. GE ...... front panel of the device you want CAN 1. Try a variety of the device’s functions with the remote. the type of device you’re trying to PROS ymphonic ...... your brand of device is listed, this search can be very quick S CXC ...... If you’re programming the DVD•VCR key, you need VCR Cytron o...... o ...... MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 0123456789 Daew • Make sure the remote is in the correct mode by pressing i Panasonic Sharp Sony Toshiba Dell ...... d Visio more of the following measures: x Mitsubish Denon ...... you are currently programming the remote to control. Magnavo remote is in TV Mode and you want to operate the DVD Diamon Philips JVC Dumont ...... Durabrand...... RCA Samsung a GE Dwin Dynex ..... to control. Press POWER on the PROSCAN Electrogr If some features of your devices don’t work, go to the program, and fi nd your brand in DVD BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL and easy. Electrohrso msung Sharp Sony Toshib 0123456789 Eme to tell the remote which kind of device you want this • Reorient or relocate the receiving antenna...... the corresponding device key (TV, SAT•CBL•STREAM, Panasonic Pioneer Sa Empr Magnavox Env Press and hold the DVD•VCR key. While you’re holding ips Phil VC ESA player, you must press the DVD•VCR key to change Fi Apex J RCA F GE DVD•VCR CODE Panasonic PROSCAN AMNIO ADB THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL Magnavox • Increase the separation between the equipment and receiver. Philips remote and wait 2 seconds. The Scientific 0123456789ta next step to try a different code. that section. Circle the codes for SAT/CABLE Hughes Atlan Network key to control, VCR or DVD. Test the remote with the device to make sure the General Systems DVD•VCR). This tells the remote which device to operate. Dish Network Instruments Systems/ Echostar down the DVD•VCR key, use your other hand to press device modes. RCA Motorola DirecTV GE DAMAGES WHATSOEVER. No person or representative is authorized • Connect the equipment into an outlet on a circuit different from that TIPS: Each device key is associated with a type of device— PROSCAN remote is testing a single code for your brand and keep them handy. 0123456789 device key is programmed with the correct code for to which the receiver is connected. the TV is preset to search for TVs, SAT•CBL•STREAM for Press and hold the DVD•VCR key. While you’re holding the number key for the type of device you want to 2. Repeat the Manual Code Search from the beginning. • Press the OK key after you enter a channel number. to assume for the Company any liability other than expressed herein in • Consult the dealer or an experienced radio/TV technician for help. your device’s brand. maximum functionality. If some features don’t work, try satellite receivers, cable boxes, digital TV converters, or down the DVD•VCR key, use your other hand to press control with this key: 2 for VCR, 3 for DVD. When the device turns off for the fi rst time, don’t • Remove any obstacles between the remote and the device. connection with the sale of this product. Caution: Any Changes or modifi cations not expressly approved by the a different code. See the “Testing the Code for Maximum press the STOP key, which would store the same code. Backlighting party responsible for compliance could void the user’s authority to streaming media players and DVD•VCR for VCRs or DVD Did your device turn off? 3. Press and hold the device key you want to program the number key for the type of device you want to Make sure to aim the remote at the IR sensor on the device. Some states/provinces do not allow limitations on how long an implied operate this equipment. Functionality” section below for more information. Instead, with the unit now off, continue to press the DVD VCR warranty lasts or the exclusion or limitation of incidental or consequential players. (the POWER key comes on). control with this key: 2 for VCR, 3 for DVD. Backlight illumination helps you see the remote control YES: Press the STOP key to store the code. You’re POWER key repeatedly until the unit turns back on. damage so the above limitations or exclusions may not apply to you. During the Auto Code Search, the remote ignores keys better in the dark. You can turn backlight illumination Problem: The device’s menu does not appear on the TV Industry Canada Regulatory Information The POWER key serves as an indicator light during done! You’ve programmed this device key. This Warranty gives you specifi c legal rights and you may also have This class B digital apparatus complies with Canadian ICES-003 While you’re holding down the device key, use your 3. Once the unit turns back on, you have found another on or off by pressing the LIGHT key ( ). Backlighting screen. programming, giving you feedback at each stage of the keypresses that aren’t part of the search. other rights, which vary from state/province to state/province. Avis d’Industrie Canada other hand enter the fi rst fi ve-digit code for your brand code that operates the device. Press the STOP key. stays on as long as keys are being pressed and turns off six process. NO: Press POWER again. The remote tests the next • Make sure you have connected the device to your TV properly U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New Cet appareil numérique de la classe B est conforme a la nome in the code list (the POWER key goes off after the fi rst The search times out after two minutes (the POWER key seconds after the last keypress. Once the backlight time has Troubleshooting NMB-003du Canada code for your brand. 4. Test the key’s functionality again by trying a variety and selected the correct input. (See your devices’ Owner’s York 11788 digit). blinks four times and turns off, and the last programmed timed out, any keypress will reactivate it. If the backlight To exit without saving a new code at any point in the Brand of functions. If the code controls the majority of the Manuals for proper connection procedures.) CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, SAVE THIS MANUAL AND THE CODE LISTS! Code Search, press the GO BACK key. Keep pressing POWER every 2 seconds until your code under that device key is retained). illumination is on, and you press the backlight key, the Problem: The remote does not operate your device. Unit 3, Door 16, Mississauga, Ontario L5T 3A5 Remote controls can sometimes lose their programming when device turns off. When it does, press STOP. device’s functions, programming is complete. If the • Make sure the remote is in the correct mode by pressing backlight turns off. • Make sure the remote is in the correct mode by pressing you change the batteries. Make sure you keep the manual and The POWER key blinks four times and turns off when the code stored does not give maximum functionality, try the corresponding device key (TV, SAT•CBL•STREAM, code lists in a safe place so that you can reprogram the remote the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate. remote has gone through all the codes. The remote exits another code. if you need to. 1. Manually turn on the device NOTES DVD•VCR). This tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to you want to control. Throughout the programming of each key, be sure to the Auto Code Search. If your device hasn’t turned off Congratulations on your purchase of this 3-device RCA yet, try a different search method. Advanced Functions • Remove any obstacles between the remote and the device. use your original remote control to access menu functions Universal Remote Control. This remote features a library keep the remote pointed at the IR sensor of the device Tour of the Remote Make sure you’re aiming the remote at the device’s IR for some devices. of codes with the latest devices of all major brands, with you are currently programming the remote to control. sensor. support for streaming media players as well. The navigation Code Retrieval For more information, please visit Test the remote with the device to make sure the • Make sure the batteries are fresh and are properly installed. keys have been redesigned to function seamlessly with the 2. If you’re programming the TV or 3. Press and hold the device key you want to program. Once you’ve programmed the remote to control your www.RCAAudioVideo.com device key is programmed with the correct code for Testing the Code for Maximum Functionality In most cases, the keys Replace the batteries with two new AA batteries, if necessary more sophisticated menu and guide systems found in today’s SAT•CBL•STREAM key, go to step 3. While you’re holding down the device key, use your devices, you may want to record the codes for future Consumer Help Line: 1-800-420-7968 maximum functionality. If some features don’t work, try 3. Press and hold the device key you want to program. 1. Try a variety of the device’s functions with the remote. on this remote perform (see the Battery Installation section). home entertainment devices. other hand to press and hold the remote’s POWER key reference. If you used the Direct Code Entry method, this If you’re programming the DVD•VCR key, you need a different code. See the “Testing the Code for Maximum While you’re holding down the device key, use your If some device features don’t work, go to next step to the same functions at the same time. is easy. Just fi nd the codes you entered and make a note to tell the remote which kind of device you want this Functionality” section below for more information. other hand to press and hold the remote’s POWER key try a different code. as the keys on your Problem: The remote can’t be programmed to operate Care and Maintenance of them in the boxes below. If you used one of the Code key to control, VCR or DVD. During the Brand Code Search, the remote ignores at the same time. original remotes once your device. • Keep the remote dry. If it gets wet, wipe it dry Step 1: Install your batteries 2. Repeat the Auto Code Search Method from the Search methods to program your remote or if you used the keypresses that aren’t part of the search. you’ve programmed this • If you are testing the remote while programming it, you may immediately. Press and hold the DVD•VCR key. While you’re holding beginning. When your device turns off, do not stop Direct Entry method but don’t remember the code, you will The search times out after two minutes (the POWER key remote to operate your be too far away from the device or at a wrong angle. There • Use and store the remote only in normal temperature Your universal remote requires two AA alkaline batteries down the DVD•VCR key, use your other hand to press 4. When you’ve fi nished entering the fi ve-digit code, keep searching. Instead, with the unit now off, continue to need to retrieve each device’s fi ve-digit code. Retrieving (batteries may or may not be included, depending on model). blinks four times and turns off, and the last programmed components. Many keys must be an unobstructed path between the remote and the environments. the number key for the type of device you want to holding down the device key and look at the POWER press the PLAY key every 5 seconds until the unit turns the actual code and writing it down will save you time code under that device key is retained). key. on this remote have other IR sensor on the device. Move closer and make sure you • Handle the remote gently and carefully. Don’t drop it. To install the batteries: control with this key: 2 for VCR, 3 for DVD. back on. if you ever need to program the remote again (e.g., if point the remote at the device you’re trying to control. The POWER key blinks four times and turns off when the functions as well. Is the POWER key on? 3. Once the unit turns back on, press the REVERSE key programming is lost when you change the batteries). If the • Keep the remote away from dust and dirt. 1. Remove the battery compartment remote has gone through all the codes. The remote exits • If you’re using the Direct Entry programming method cover. YES: You’re done! You’ve programmed this device key. on the remote every 2 seconds until your device turns Illuminated POWER key codes are recorded, you can use the Direct Entry method • Wipe the remote with a damp cloth occasionally to keep it the Brand Code Search. If your device hasn’t turned off to enter the codes for your brand and the unit is still not off again. When your device turns off again, press the 4. Wait until the POWER key comes on and stays on. serves as an indicator to reprogram your remote to control your devices, which is looking new. 2. Insert the batteries, matching the yet, try a different search method. NO, it blinked four times and turned off: You have functioning properly, try the auto, brand, or manual search Then release both keys. light to provide feedback. quick and easy. • Modifying or tampering with the remote’s internal devices batteries to the (+) and (–) marks either entered a code number that is not in the code lists 4. Wait until the POWER key comes on and stays on. STOP key. method. inside the battery compartment. can cause malfunction and invalidate its warranty. or missed a step in the code entry procedure. Try step 3 Then release both keys. 4. Test the key’s functionality again by attempting to Device keys (TV, • To control combo units, like TV/VCRs or TV/DVDs, you must Testing the Code for Maximum Functionality 5. Point the remote directly at the front panel of the device POWER key 3. Push the battery cover back into again. control a variety of the device’s functions. If the code SAT•CBL•STREAM, 1. Press and hold the device program the individual corresponding device keys to control place. you want to control. Press POWER on the remote and 1. Try a variety of the device’s functions with the remote. that has been stored controls the majority of the DVD•VCR) put the remote key (TV, SAT•CBL•STREAM, each part of the combo unit. Once programmed successfully, NOTES 5. Point the remote directly at the wait 2 seconds. The remote is testing a single code for the TV key controls the TV functions, and the DVD•VCR key If some device features don’t work, go to the next step device’s functions, programming is complete. If the in the right mode to DVD•VCR) whose code you front panel of the device you your device. controls the VCR or DVD functions. Battery Precautions: to try a different code. Remember to enter the code for future reference in the code stored does not give maximum functionality, try control your device. wish to retrieve. The POWER • Do not mix old and new batteries. want to control. Press PLAY on another code. Did your device turn off? key turns on. Keep pressing • Make sure the batteries are fresh and are properly installed. 2. Repeat the Brand Code Search from the beginning. box provided in the Code Retrieval section of this manual. • Do not mix alkaline, standard (carbon-zinc) or the remote and wait 5 seconds. LIGHT key ( ) turns the device key. When the device turns off for the fi rst time, don’t If your brand isn’t listed in the code list, use one of the YES: Press the STOP key to store rechargeable (nickel-cadmium) batteries. The remote is testing a batch of backlighting on/off. Problem: The remote doesn’t perform commands properly. • Always remove old, weak or worn-out batteries promptly press the STOP key, which would store the same code. Code Search methods to program the remote control. 10 codes on your device. the code. You’re done! You’ve • Make sure the remote is in the correct mode by pressing and recycle or dispose of them in accordance with Local Instead, with the unit now off, continue to press the (Refer to the Auto and Manual Code Search methods.) programmed this device key. GUIDE/HOME and MENU and National Regulations. Manual Code Search 2. While holding the device key down, press and hold the the corresponding device key (TV, SAT•CBL•STREAM, POWER key repeatedly until the unit turns back on. access the same features If you release the device key any time during the Direct The Manual Code Search lets you go one-by-one through NO: Press POWER again. The INFO-OPTIONS key. The POWER key turns off. After DVD•VCR). This tells the remote which device to operate. Did your device turn off? all the codes for the device you’re trying to control. When as the keys on your 3. Once the unit turns back on, you have found another Code Entry procedure, the POWER key blinks four times, remote tests the next code for holding down both keys for three seconds, the POWER • Make sure device is ready (for example, the DVD player has Admiral ...... Battery Saver Advent ...... Aiko ...... original remotes. Akai ...... 10812, 11675, 10060, Albatron you fi nd the one that operates your device, you can stop the America...... Action ...... key turns back on. Anam ...... 10156, 107 your device. AOC ...... code that operates the device. Press the STOP key. Apex Digital and the process is exited. The last programmed code a disc loaded). Code Lists Audiovox ...... 10451, 10180, 100 YES: Go to step 6. Find your device’s brand in the ...... 10875, 1 Your universal remote control saves battery power by 3. Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... Brand Codes are used for programming using the Brand Code Search ...... BenQ ...... Bradford search and store that code. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... Los códigos de las marcas son utilizados para programar utilizando Carver under the device key is retained. Celera ...... 3. Release both keys. The POWER key remains on. automatically turning off if any key is pressed for more than los métodos de búsqueda y entrada de códigos de marcas, resaltado Arrow keys act as Brand Code list section of the Changhong ...... Citizen ...... • You may have pressed an invalid key for the mode the remote is TV Clarion 4. Test the key’s functionality again by attempting to Keep pressing POWER every 2 Brand Code List/Lista de Códigos de Marcas Commercial Solutions ...... Concerto ...... Contec ...... NO: Press PLAY again. The remote tests the next batch Panasonic Samsung Sharp Sony Toshiba Vizio Magnavox Craig ...... Philips Crosley ...... JVC 60 seconds. This saves your battery life should your remote Crown ...... RCA Insignia Curtis Mathes ...... accompanying code list. Circle GE ...... navigation keys for PROSCAN Symphonic ...... in. VCR CXC ...... Cytron ...... control a variety of the device’s functions. If the code seconds until your device turns off. 0123456789 4. Starting with the number 1 key, press and release each Daewoo ...... Dell ...... TIPS: Each device key is associated with a type of device— Mitsubishi Panasonic Sharp Sony Toshiba of 10 codes. Denon ...... Magnavox Test the remote with the device to make sure the device Diamond Visio get stuck in a place where the keys remain depressed, such Philips JVC Dumont ...... Durabrand...... RCA Samsung GE Dwin Dynex ..... streaming media players the number for your brand and PROSCAN DVD Electrogr ©2013 Voxx Accessories Corp. Electroh When it does, press STOP. 0123456789 Emerso that has been stored controls the majority of the number key on the keypad in the following order: 1-9, ...... the TV is preset to search for TVs, SAT•CBL•STREAM for • If you’re trying to enter a channel number directly, try as between sofa cushions. Panasonic Pioneer Samsung Sharp Sony Toshiba Empr Magnavox Env Philips key is programmed with the correct code for maximum ESA Fi Apex JVC RCA F GE Panasonic PROSCAN AMNIO Keep pressing PLAY every 5 seconds until your device as well as in menu and keep the list handy. ADB Magnavox Philips 3502 Woodview Trace, Suite 220 0123456789SAT/CABLE Scientific Hughes Atlanta device’s functions, programming is complete. If the then 0. The number that causes the POWER key to pressing the OK key after entering the channel number as Network satellite receivers, cable boxes, digital TV converters, or General Systems Dish Network Instruments TIP: Because there are so many codes, you may have to Systems/tar functionality. If some features don’t work, try a different Echos RCA Motorola DirecTV Actual model may vary from GE PROSCAN turns off. guide systems for other Indianapolis, IN 46268 0123456789 code stored does not give maximum functionality, try code in the list. streaming media players, and DVD•VCR for VCRs or DVD press the POWER key many times—possibly hundreds of blink is the fi rst number of the code. As you fi nd each this is a requirement of certain models and brands. devices. illustration another code. players. times. number of the code, write it down for future reference. Trademark(s) ® Registered RCR314WR US 04 Step 2: Program your remote 4. Press and hold the device key you want to program. Direct Code Entry Auto Code Search 6. When your device turns off, press The POWER key serves as an indicator light during NOTES CHAN and VOL keys act as channel and volume controllers. Note: All TV codes begin with the number 1; all VCR • There is a possibility that a programmed code may only be Limited Lifetime Warranty While you’re holding down the device key, use your Direct Code Entry lets you enter a code from the The Auto Code Search goes automatically through all the the REVERSE key on the remote programming, giving you feedback at each stage of the Throughout the programming of each key, keep the The CHAN keys also provide skip forward and skip back and DVR codes begin with the number 2; all DVDs, able to control some of your device features (for example, process. only turns a device on and off). To confi rm that the device other hand to press and hold the remote’s POWER key accompanying code list for your brand of device. It’s not as codes for the device you’re trying to control. When you fi nd and wait at least 2 seconds. remote pointed at the IR sensor of the device you are control for DVD players and DVRs that support this the number 3; and all satellite receivers, cable boxes, To use this universal remote with your home entertainment key is programmed with the correct code for maximum at the same time. easy as the other methods, but it’s potentially the fastest the one that operates your device, you can stop the search The remote tries the last of the The Manual Code Search method may take a long time programming the remote to control. functionality. streaming players, and DTV converters, the number 5. functionality, test the device. Attempt to control a variety VOXX Accessories Corporation (the “Company”) warrants to you the system, fi rst you need to program it to control your devices. previous ten codes. because the remote searches through all of the codes in original retail purchaser of this product that should it, under normal use method. and store that code. GO BACK exits remote programming; it also performs the 5. Repeat step 4 until you have retrieved all fi ve numbers of the device’s functions with the remote. If some of the There are four ways you can program the universal remote its memory one-by-one. If your brand is listed in the Brand Test the remote with the device to make sure the and conditions, be proven defective in material or workmanship during Did your device turn on? device key is programmed with the correct code for same functions as on your original remotes. in the code. After the fi fth number is retrieved, the features of your devices don’t work, try programming the Universal Remote Control to operate your devices. Try them in the order listed here: TIP: Each device key is associated with a type of device—the Codes or the Code Lists, fi rst try the Brand Code Search or its lifetime while you own it, such defect(s) will be repaired or replaced TIPS: Each device key is associated with a type maximum functionality. If some features don’t work, try POWER key blinks briefl y, then turns off. remote with a different code in the list using the Direct Code (at the Company’s option) without charge for parts and repair labor. TV is preset to search for TVs, SAT•CBL•STREAM for YES: Press the STOP key. You’re the Direct Code Entry method. • The Brand Code Search searches through the codes of device—the TV is preset to search for TVs, a different code. See the “Testing the Code for Maximum The INPUT and — (dash) key has three functions: (1) it Entry Method, until you fi nd the code that allows the remote To obtain repair or replacement within the terms of this Warranty, the Owner’s Manual satellite receivers, cable boxes, digital TV converters, or done! You’ve programmed this TIP: To exit the Code Retrieval Mode at any time, press for select brands of devices. SAT•CBL•STREAM for satellite receivers, cable boxes, To exit without saving a new code at any point in the Functionality” section below for more information. toggles through all the video sources connected to your TV; to control the majority of your device’s functions. Different product is to be delivered with proof of warranty coverage (e.g. dated bill streaming media players, and DVD•VCR for VCRs or DVD device key. the GO BACK key. RCR314WR / RCR313BR digital TV converters, or streaming media players, and Manual Code Search, press the GO BACK key. (2) when the remote is in VCR mode, this button toggles codes can provide different levels of functionality. of sale), specifi cation of defect(s), transportation prepaid, to the Company • The Direct Code Entry lets you enter a code from the players. During the Manual Code Search, the remote ignores between VCR and the TV input; (3) when you’re entering Note: If you press an invalid key during the Code at the address shown below. Manual del Propietario (parte posterior) DVD•VCR for VCRs or DVD players. keypresses that aren’t part of the search. accompanying code list for your brand of device. The POWER key serves as an indicator light during NO: Press REVERSE again. The remote tests the next digital channel numbers directly, this button lets you Retrieval process, the remote will not respond. If Problem: The POWER key does not light when you press a This Warranty does not cover product purchased, serviced or used 5. Wait until the POWER key comes on and stays on. To exit without saving a new code at any point in the you do not press a valid Code Retrieval key (TV, outside the United States or Canada. This Warranty is not transferable programming, giving you feedback at each stage of the code in the batch. 1. Manually turn on the device you The search times out after two minutes (the POWER key separate the main channel number from the sub-channel key. FCC Statement: • The Auto Code Search goes automatically through all Then release both keys. Auto Code Search, press the GO BACK key. SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), and does not extend to costs incurred for installation, removal or process. want to control. blinks four times and turns off, and the last programmed number (such as 59.1). • You may have pressed an invalid key for the mode the This device complies with part 15 of the FCC Rules. Operation is subject the codes for the device you’re trying to control. Keep pressing REVERSE every 2 seconds until your Code Retrieval times out after 15 seconds. The POWER reinstallation of the product. This Warranty does not apply if in the to the following two conditions: (1) This device may not cause harmful device turns back on. When it does, press STOP. code under that device key is retained). remote is in. Company’s opinion, the product has been damaged through alteration, interference, and (2) this device must accept any interference received, 1. Manually turn on the device you key blinks four times, and then turns off. • The Manual Code Search lets you manually go 6. Look at the number you circled for 1. Manually turn on the device you • Make sure the remote is in the correct mode by pressing improper installation, mishandling, misuse, neglect, accident, or the including interference that may cause undesired operation. want to control. Note: If you accidentally press the REVERSE key after The POWER key blinks four times and turns off when the IMPORTANT Note: This equipment has been tested and found to comply with the through all the codes for the device you’re trying to your device’s brand code number. want to control. the corresponding device key (TV, SAT•CBL•STREAM, simultaneous use of different battery types (e.g. alkaline, standard or your device turns on, press the FORWARD key. Then, wait remote has gone through all the codes. The remote exits rechargeable). limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Press that number on the remote DVD•VCR). This tells the remote which device to operate. These limits are designed to provide reasonable protection against control. the Manual Code Search. If your device hasn’t turned off Because this remote controls more than one device, TV CODE SAT•CBL•STREAM CODE two seconds to see if your device turns off again. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY harmful interference in a residential installation. This equipment keypad. If you’re programming the TV or yet, try a different search method. • Make sure the batteries are fresh and are properly installed. generates, uses and can radiate radio frequency energy and, if not 2. you must fi rst “tell” the remote which device you wish IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE Replace the batteries with two new AA batteries, if necessary installed and used in accordance with the instructions, may cause NOTES SAT•CBL•STREAM key, go to step 3. to operate. That means, if you wish to operate your TV, 1 5 AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE harmful interference to radio communications. However, there is no Brand Code Search (see the Battery Installation section). Admiral ...... PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. Advent ...... Aiko ...... you must fi rst press the TV key to put the remote in the Akai ...... 10812, 11675, 10060, Albatrona Action ...... If you’re programming the TV or Americ...... 2. guarantee that interference will not occur in a particular installation. If ...... 10156, 107 Anam AOC ...... If you’re programming the DVD•VCR key, you need Find the Code List that came with Apex Digital The Brand Code Search goes through only the codes for one 2. Code Lists Audiovox ...... 10451, 10180, 10 ...... 10875, 1 Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... this equipment does cause harmful interference to radio or television Brand Codes are used for programming using the Brand Code Search ...... Throughout the programming of each key, be sure to BenQ ...... TV Mode. The remote stays in that device mode until This Warranty is in lieu of all other express warranties or liabilities. ANY Bradford ...... arcas son utilizados para programar utilizando SAT•CBL•STREAM key, go to step 3. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... to tell the remote which kind of device you want this Testing the Code for Maximum Functionality SAT CABLE DTV CONVERTER Los códigos de las m Carver Point the remote directly at the io the remote. Locate the section for los métodos de búsqueda y entrada de códigos de marcas, resaltado Celera ...... of the select brands listed in the accompanying code list. If anghong ...... reception, which can be determined by turning the equipment off and 7. Ch Citizen ...... Problem: The remote will not change channels on device. TV ony Toshiba Viz Brand Code List/Lista de Códigos de Marcas Clarion Commercial Solutions ...... IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF Concerto ...... keep the remote pointed at the IR sensor of the device you press a different device key. For example, if your Contec ...... STREAMING PLAYER Panasonic Samsung Sharp S Magnavox Craig ...... Philips Crosleyn ...... s ...... JVC w on, the user is encouraged to try to correct the interference by one or Cro RCA Insignia Curtis Mathe key to control, VCR or DVD. GE ...... front panel of the device you want CAN 1. Try a variety of the device’s functions with the remote. the type of device you’re trying to PROS ymphonic ...... your brand of device is listed, this search can be very quick S CXC ...... If you’re programming the DVD•VCR key, you need VCR Cytron o...... o ...... MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 0123456789 Daew • Make sure the remote is in the correct mode by pressing i Panasonic Sharp Sony Toshiba Dell ...... d Visio more of the following measures: x Mitsubish Denon ...... you are currently programming the remote to control. Magnavo remote is in TV Mode and you want to operate the DVD Diamon Philips JVC Dumont ...... Durabrand...... RCA Samsung a GE Dwin Dynex ..... to control. Press POWER on the PROSCAN Electrogr If some features of your devices don’t work, go to the program, and fi nd your brand in DVD BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL and easy. Electrohrso msung Sharp Sony Toshib 0123456789 Eme to tell the remote which kind of device you want this • Reorient or relocate the receiving antenna...... the corresponding device key (TV, SAT•CBL•STREAM, Panasonic Pioneer Sa Empr Magnavox Env Press and hold the DVD•VCR key. While you’re holding ips Phil VC ESA player, you must press the DVD•VCR key to change Fi Apex J RCA F GE DVD•VCR CODE Panasonic PROSCAN AMNIO ADB THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL Magnavox • Increase the separation between the equipment and receiver. Philips remote and wait 2 seconds. The Scientific 0123456789ta next step to try a different code. that section. Circle the codes for SAT/CABLE Hughes Atlan Network key to control, VCR or DVD. Test the remote with the device to make sure the General Systems DVD•VCR). This tells the remote which device to operate. Dish Network Instruments Systems/ Echostar down the DVD•VCR key, use your other hand to press device modes. RCA Motorola DirecTV GE DAMAGES WHATSOEVER. No person or representative is authorized • Connect the equipment into an outlet on a circuit different from that TIPS: Each device key is associated with a type of device— PROSCAN remote is testing a single code for your brand and keep them handy. 0123456789 device key is programmed with the correct code for to which the receiver is connected. the TV is preset to search for TVs, SAT•CBL•STREAM for Press and hold the DVD•VCR key. While you’re holding the number key for the type of device you want to 2. Repeat the Manual Code Search from the beginning. • Press the OK key after you enter a channel number. to assume for the Company any liability other than expressed herein in • Consult the dealer or an experienced radio/TV technician for help. your device’s brand. maximum functionality. If some features don’t work, try satellite receivers, cable boxes, digital TV converters, or down the DVD•VCR key, use your other hand to press control with this key: 2 for VCR, 3 for DVD. When the device turns off for the fi rst time, don’t • Remove any obstacles between the remote and the device. connection with the sale of this product. Caution: Any Changes or modifi cations not expressly approved by the a different code. See the “Testing the Code for Maximum press the STOP key, which would store the same code. Backlighting party responsible for compliance could void the user’s authority to streaming media players and DVD•VCR for VCRs or DVD Did your device turn off? 3. Press and hold the device key you want to program the number key for the type of device you want to Make sure to aim the remote at the IR sensor on the device. Some states/provinces do not allow limitations on how long an implied operate this equipment. Functionality” section below for more information. Instead, with the unit now off, continue to press the DVD VCR warranty lasts or the exclusion or limitation of incidental or consequential players. (the POWER key comes on). control with this key: 2 for VCR, 3 for DVD. Backlight illumination helps you see the remote control YES: Press the STOP key to store the code. You’re POWER key repeatedly until the unit turns back on. damage so the above limitations or exclusions may not apply to you. During the Auto Code Search, the remote ignores keys better in the dark. You can turn backlight illumination Problem: The device’s menu does not appear on the TV Industry Canada Regulatory Information The POWER key serves as an indicator light during done! You’ve programmed this device key. This Warranty gives you specifi c legal rights and you may also have This class B digital apparatus complies with Canadian ICES-003 While you’re holding down the device key, use your 3. Once the unit turns back on, you have found another on or off by pressing the LIGHT key ( ). Backlighting screen. programming, giving you feedback at each stage of the keypresses that aren’t part of the search. other rights, which vary from state/province to state/province. Avis d’Industrie Canada other hand enter the fi rst fi ve-digit code for your brand code that operates the device. Press the STOP key. stays on as long as keys are being pressed and turns off six process. NO: Press POWER again. The remote tests the next • Make sure you have connected the device to your TV properly U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New Cet appareil numérique de la classe B est conforme a la nome in the code list (the POWER key goes off after the fi rst The search times out after two minutes (the POWER key seconds after the last keypress. Once the backlight time has Troubleshooting NMB-003du Canada code for your brand. 4. Test the key’s functionality again by trying a variety and selected the correct input. (See your devices’ Owner’s York 11788 digit). blinks four times and turns off, and the last programmed timed out, any keypress will reactivate it. If the backlight To exit without saving a new code at any point in the Brand of functions. If the code controls the majority of the Manuals for proper connection procedures.) CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, SAVE THIS MANUAL AND THE CODE LISTS! Code Search, press the GO BACK key. Keep pressing POWER every 2 seconds until your code under that device key is retained). illumination is on, and you press the backlight key, the Problem: The remote does not operate your device. Unit 3, Door 16, Mississauga, Ontario L5T 3A5 Remote controls can sometimes lose their programming when device turns off. When it does, press STOP. device’s functions, programming is complete. If the • Make sure the remote is in the correct mode by pressing backlight turns off. • Make sure the remote is in the correct mode by pressing you change the batteries. Make sure you keep the manual and The POWER key blinks four times and turns off when the code stored does not give maximum functionality, try the corresponding device key (TV, SAT•CBL•STREAM, code lists in a safe place so that you can reprogram the remote the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate. remote has gone through all the codes. The remote exits another code. if you need to. 1. Manually turn on the device NOTES DVD•VCR). This tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to you want to control. Throughout the programming of each key, be sure to the Auto Code Search. If your device hasn’t turned off Congratulations on your purchase of this 3-device RCA yet, try a different search method. Advanced Functions • Remove any obstacles between the remote and the device. use your original remote control to access menu functions Universal Remote Control. This remote features a library keep the remote pointed at the IR sensor of the device Tour of the Remote Make sure you’re aiming the remote at the device’s IR for some devices. of codes with the latest devices of all major brands, with you are currently programming the remote to control. sensor. support for streaming media players as well. The navigation Code Retrieval For more information, please visit Test the remote with the device to make sure the • Make sure the batteries are fresh and are properly installed. keys have been redesigned to function seamlessly with the 2. If you’re programming the TV or 3. Press and hold the device key you want to program. Once you’ve programmed the remote to control your www.RCAAudioVideo.com device key is programmed with the correct code for Testing the Code for Maximum Functionality In most cases, the keys Replace the batteries with two new AA batteries, if necessary more sophisticated menu and guide systems found in today’s SAT•CBL•STREAM key, go to step 3. While you’re holding down the device key, use your devices, you may want to record the codes for future Consumer Help Line: 1-800-420-7968 maximum functionality. If some features don’t work, try 3. Press and hold the device key you want to program. 1. Try a variety of the device’s functions with the remote. on this remote perform (see the Battery Installation section). home entertainment devices. other hand to press and hold the remote’s POWER key reference. If you used the Direct Code Entry method, this If you’re programming the DVD•VCR key, you need a different code. See the “Testing the Code for Maximum While you’re holding down the device key, use your If some device features don’t work, go to next step to the same functions at the same time. is easy. Just fi nd the codes you entered and make a note to tell the remote which kind of device you want this Functionality” section below for more information. other hand to press and hold the remote’s POWER key try a different code. as the keys on your Problem: The remote can’t be programmed to operate Care and Maintenance of them in the boxes below. If you used one of the Code key to control, VCR or DVD. During the Brand Code Search, the remote ignores at the same time. original remotes once your device. • Keep the remote dry. If it gets wet, wipe it dry Step 1: Install your batteries 2. Repeat the Auto Code Search Method from the Search methods to program your remote or if you used the keypresses that aren’t part of the search. you’ve programmed this • If you are testing the remote while programming it, you may immediately. Press and hold the DVD•VCR key. While you’re holding beginning. When your device turns off, do not stop Direct Entry method but don’t remember the code, you will The search times out after two minutes (the POWER key remote to operate your be too far away from the device or at a wrong angle. There • Use and store the remote only in normal temperature Your universal remote requires two AA alkaline batteries down the DVD•VCR key, use your other hand to press 4. When you’ve fi nished entering the fi ve-digit code, keep searching. Instead, with the unit now off, continue to need to retrieve each device’s fi ve-digit code. Retrieving (batteries may or may not be included, depending on model). blinks four times and turns off, and the last programmed components. Many keys must be an unobstructed path between the remote and the environments. the number key for the type of device you want to holding down the device key and look at the POWER press the PLAY key every 5 seconds until the unit turns the actual code and writing it down will save you time code under that device key is retained). key. on this remote have other IR sensor on the device. Move closer and make sure you • Handle the remote gently and carefully. Don’t drop it. To install the batteries: control with this key: 2 for VCR, 3 for DVD. back on. if you ever need to program the remote again (e.g., if point the remote at the device you’re trying to control. The POWER key blinks four times and turns off when the functions as well. Is the POWER key on? 3. Once the unit turns back on, press the REVERSE key programming is lost when you change the batteries). If the • Keep the remote away from dust and dirt. 1. Remove the battery compartment remote has gone through all the codes. The remote exits • If you’re using the Direct Entry programming method cover. YES: You’re done! You’ve programmed this device key. on the remote every 2 seconds until your device turns Illuminated POWER key codes are recorded, you can use the Direct Entry method • Wipe the remote with a damp cloth occasionally to keep it the Brand Code Search. If your device hasn’t turned off to enter the codes for your brand and the unit is still not off again. When your device turns off again, press the 4. Wait until the POWER key comes on and stays on. serves as an indicator to reprogram your remote to control your devices, which is looking new. 2. Insert the batteries, matching the yet, try a different search method. NO, it blinked four times and turned off: You have functioning properly, try the auto, brand, or manual search Then release both keys. light to provide feedback. quick and easy. • Modifying or tampering with the remote’s internal devices batteries to the (+) and (–) marks either entered a code number that is not in the code lists 4. Wait until the POWER key comes on and stays on. STOP key. method. inside the battery compartment. can cause malfunction and invalidate its warranty. or missed a step in the code entry procedure. Try step 3 Then release both keys. 4. Test the key’s functionality again by attempting to Device keys (TV, • To control combo units, like TV/VCRs or TV/DVDs, you must Testing the Code for Maximum Functionality 5. Point the remote directly at the front panel of the device POWER key 3. Push the battery cover back into again. control a variety of the device’s functions. If the code SAT•CBL•STREAM, 1. Press and hold the device program the individual corresponding device keys to control place. you want to control. Press POWER on the remote and 1. Try a variety of the device’s functions with the remote. that has been stored controls the majority of the DVD•VCR) put the remote key (TV, SAT•CBL•STREAM, each part of the combo unit. Once programmed successfully, NOTES 5. Point the remote directly at the wait 2 seconds. The remote is testing a single code for the TV key controls the TV functions, and the DVD•VCR key If some device features don’t work, go to the next step device’s functions, programming is complete. If the in the right mode to DVD•VCR) whose code you front panel of the device you your device. controls the VCR or DVD functions. Battery Precautions: to try a different code. Remember to enter the code for future reference in the code stored does not give maximum functionality, try control your device. wish to retrieve. The POWER • Do not mix old and new batteries. want to control. Press PLAY on another code. Did your device turn off? key turns on. Keep pressing • Make sure the batteries are fresh and are properly installed. 2. Repeat the Brand Code Search from the beginning. box provided in the Code Retrieval section of this manual. • Do not mix alkaline, standard (carbon-zinc) or the remote and wait 5 seconds. LIGHT key ( ) turns the device key. When the device turns off for the fi rst time, don’t If your brand isn’t listed in the code list, use one of the YES: Press the STOP key to store rechargeable (nickel-cadmium) batteries. The remote is testing a batch of backlighting on/off. Problem: The remote doesn’t perform commands properly. • Always remove old, weak or worn-out batteries promptly press the STOP key, which would store the same code. Code Search methods to program the remote control. 10 codes on your device. the code. You’re done! You’ve • Make sure the remote is in the correct mode by pressing and recycle or dispose of them in accordance with Local Instead, with the unit now off, continue to press the (Refer to the Auto and Manual Code Search methods.) programmed this device key. GUIDE/HOME and MENU and National Regulations. Manual Code Search 2. While holding the device key down, press and hold the the corresponding device key (TV, SAT•CBL•STREAM, POWER key repeatedly until the unit turns back on. access the same features If you release the device key any time during the Direct The Manual Code Search lets you go one-by-one through NO: Press POWER again. The INFO-OPTIONS key. The POWER key turns off. After DVD•VCR). This tells the remote which device to operate. Did your device turn off? all the codes for the device you’re trying to control. When as the keys on your 3. Once the unit turns back on, you have found another Code Entry procedure, the POWER key blinks four times, remote tests the next code for holding down both keys for three seconds, the POWER • Make sure device is ready (for example, the DVD player has Admiral ...... Battery Saver Advent ...... Aiko ...... original remotes. Akai ...... 10812, 11675, 10060, Albatron you fi nd the one that operates your device, you can stop the America...... Action ...... key turns back on. Anam ...... 10156, 107 your device. AOC ...... code that operates the device. Press the STOP key. Apex Digital and the process is exited. The last programmed code a disc loaded). Code Lists Audiovox ...... 10451, 10180, 100 YES: Go to step 6. Find your device’s brand in the ...... 10875, 1 Your universal remote control saves battery power by 3. Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... Brand Codes are used for programming using the Brand Code Search ...... BenQ ...... Bradford search and store that code. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... Los códigos de las marcas son utilizados para programar utilizando Carver under the device key is retained. Celera ...... 3. Release both keys. The POWER key remains on. automatically turning off if any key is pressed for more than los métodos de búsqueda y entrada de códigos de marcas, resaltado Arrow keys act as Brand Code list section of the Changhong ...... Citizen ...... • You may have pressed an invalid key for the mode the remote is TV Clarion 4. Test the key’s functionality again by attempting to Keep pressing POWER every 2 Brand Code List/Lista de Códigos de Marcas Commercial Solutions ...... Concerto ...... Contec ...... NO: Press PLAY again. The remote tests the next batch Panasonic Samsung Sharp Sony Toshiba Vizio Magnavox Craig ...... Philips Crosley ...... JVC 60 seconds. This saves your battery life should your remote Crown ...... RCA Insignia Curtis Mathes ...... accompanying code list. Circle GE ...... navigation keys for PROSCAN Symphonic ...... in. VCR CXC ...... Cytron ...... control a variety of the device’s functions. If the code seconds until your device turns off. 0123456789 4. Starting with the number 1 key, press and release each Daewoo ...... Dell ...... TIPS: Each device key is associated with a type of device— Mitsubishi Panasonic Sharp Sony Toshiba of 10 codes. Denon ...... Magnavox Test the remote with the device to make sure the device Diamond Visio get stuck in a place where the keys remain depressed, such Philips JVC Dumont ...... Durabrand...... RCA Samsung GE Dwin Dynex ..... streaming media players the number for your brand and PROSCAN DVD Electrogr ©2013 Voxx Accessories Corp. Electroh When it does, press STOP. 0123456789 Emerso that has been stored controls the majority of the number key on the keypad in the following order: 1-9, ...... the TV is preset to search for TVs, SAT•CBL•STREAM for • If you’re trying to enter a channel number directly, try as between sofa cushions. Panasonic Pioneer Samsung Sharp Sony Toshiba Empr Magnavox Env Philips key is programmed with the correct code for maximum ESA Fi Apex JVC RCA F GE Panasonic PROSCAN AMNIO Keep pressing PLAY every 5 seconds until your device as well as in menu and keep the list handy. ADB Magnavox Philips 3502 Woodview Trace, Suite 220 0123456789SAT/CABLE Scientific Hughes Atlanta device’s functions, programming is complete. If the then 0. The number that causes the POWER key to pressing the OK key after entering the channel number as Network satellite receivers, cable boxes, digital TV converters, or General Systems Dish Network Instruments TIP: Because there are so many codes, you may have to Systems/tar functionality. If some features don’t work, try a different Echos RCA Motorola DirecTV Actual model may vary from GE PROSCAN turns off. guide systems for other Indianapolis, IN 46268 0123456789 code stored does not give maximum functionality, try code in the list. streaming media players, and DVD•VCR for VCRs or DVD press the POWER key many times—possibly hundreds of blink is the fi rst number of the code. As you fi nd each this is a requirement of certain models and brands. devices. illustration another code. players. times. number of the code, write it down for future reference. Trademark(s) ® Registered RCR314WR US 04 Step 2: Program your remote 4. Press and hold the device key you want to program. Direct Code Entry Auto Code Search 6. When your device turns off, press The POWER key serves as an indicator light during NOTES CHAN and VOL keys act as channel and volume controllers. Note: All TV codes begin with the number 1; all VCR • There is a possibility that a programmed code may only be Limited Lifetime Warranty While you’re holding down the device key, use your Direct Code Entry lets you enter a code from the The Auto Code Search goes automatically through all the the REVERSE key on the remote programming, giving you feedback at each stage of the Throughout the programming of each key, keep the The CHAN keys also provide skip forward and skip back and DVR codes begin with the number 2; all DVDs, able to control some of your device features (for example, process. only turns a device on and off). To confi rm that the device other hand to press and hold the remote’s POWER key accompanying code list for your brand of device. It’s not as codes for the device you’re trying to control. When you fi nd and wait at least 2 seconds. remote pointed at the IR sensor of the device you are control for DVD players and DVRs that support this the number 3; and all satellite receivers, cable boxes, To use this universal remote with your home entertainment key is programmed with the correct code for maximum at the same time. easy as the other methods, but it’s potentially the fastest the one that operates your device, you can stop the search The remote tries the last of the The Manual Code Search method may take a long time programming the remote to control. functionality. streaming players, and DTV converters, the number 5. functionality, test the device. Attempt to control a variety VOXX Accessories Corporation (the “Company”) warrants to you the system, fi rst you need to program it to control your devices. previous ten codes. because the remote searches through all of the codes in original retail purchaser of this product that should it, under normal use method. and store that code. GO BACK exits remote programming; it also performs the 5. Repeat step 4 until you have retrieved all fi ve numbers of the device’s functions with the remote. If some of the There are four ways you can program the universal remote its memory one-by-one. If your brand is listed in the Brand Test the remote with the device to make sure the and conditions, be proven defective in material or workmanship during Did your device turn on? device key is programmed with the correct code for same functions as on your original remotes. in the code. After the fi fth number is retrieved, the features of your devices don’t work, try programming the Universal Remote Control to operate your devices. Try them in the order listed here: TIP: Each device key is associated with a type of device—the Codes or the Code Lists, fi rst try the Brand Code Search or its lifetime while you own it, such defect(s) will be repaired or replaced TIPS: Each device key is associated with a type maximum functionality. If some features don’t work, try POWER key blinks briefl y, then turns off. remote with a different code in the list using the Direct Code (at the Company’s option) without charge for parts and repair labor. TV is preset to search for TVs, SAT•CBL•STREAM for YES: Press the STOP key. You’re the Direct Code Entry method. • The Brand Code Search searches through the codes of device—the TV is preset to search for TVs, a different code. See the “Testing the Code for Maximum The INPUT and — (dash) key has three functions: (1) it Entry Method, until you fi nd the code that allows the remote To obtain repair or replacement within the terms of this Warranty, the Owner’s Manual satellite receivers, cable boxes, digital TV converters, or done! You’ve programmed this TIP: To exit the Code Retrieval Mode at any time, press for select brands of devices. SAT•CBL•STREAM for satellite receivers, cable boxes, To exit without saving a new code at any point in the Functionality” section below for more information. toggles through all the video sources connected to your TV; to control the majority of your device’s functions. Different product is to be delivered with proof of warranty coverage (e.g. dated bill streaming media players, and DVD•VCR for VCRs or DVD device key. the GO BACK key. RCR314WR / RCR313BR digital TV converters, or streaming media players, and Manual Code Search, press the GO BACK key. (2) when the remote is in VCR mode, this button toggles codes can provide different levels of functionality. of sale), specifi cation of defect(s), transportation prepaid, to the Company • The Direct Code Entry lets you enter a code from the players. During the Manual Code Search, the remote ignores between VCR and the TV input; (3) when you’re entering Note: If you press an invalid key during the Code at the address shown below. Manual del Propietario (parte posterior) DVD•VCR for VCRs or DVD players. keypresses that aren’t part of the search. accompanying code list for your brand of device. The POWER key serves as an indicator light during NO: Press REVERSE again. The remote tests the next digital channel numbers directly, this button lets you Retrieval process, the remote will not respond. If Problem: The POWER key does not light when you press a This Warranty does not cover product purchased, serviced or used 5. Wait until the POWER key comes on and stays on. To exit without saving a new code at any point in the you do not press a valid Code Retrieval key (TV, outside the United States or Canada. This Warranty is not transferable programming, giving you feedback at each stage of the code in the batch. 1. Manually turn on the device you The search times out after two minutes (the POWER key separate the main channel number from the sub-channel key. FCC Statement: • The Auto Code Search goes automatically through all Then release both keys. Auto Code Search, press the GO BACK key. SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), and does not extend to costs incurred for installation, removal or process. want to control. blinks four times and turns off, and the last programmed number (such as 59.1). • You may have pressed an invalid key for the mode the This device complies with part 15 of the FCC Rules. Operation is subject the codes for the device you’re trying to control. Keep pressing REVERSE every 2 seconds until your Code Retrieval times out after 15 seconds. The POWER reinstallation of the product. This Warranty does not apply if in the to the following two conditions: (1) This device may not cause harmful device turns back on. When it does, press STOP. code under that device key is retained). remote is in. Company’s opinion, the product has been damaged through alteration, interference, and (2) this device must accept any interference received, 1. Manually turn on the device you key blinks four times, and then turns off. • The Manual Code Search lets you manually go 6. Look at the number you circled for 1. Manually turn on the device you • Make sure the remote is in the correct mode by pressing improper installation, mishandling, misuse, neglect, accident, or the including interference that may cause undesired operation. want to control. Note: If you accidentally press the REVERSE key after The POWER key blinks four times and turns off when the IMPORTANT Note: This equipment has been tested and found to comply with the through all the codes for the device you’re trying to your device’s brand code number. want to control. the corresponding device key (TV, SAT•CBL•STREAM, simultaneous use of different battery types (e.g. alkaline, standard or your device turns on, press the FORWARD key. Then, wait remote has gone through all the codes. The remote exits rechargeable). limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Press that number on the remote DVD•VCR). This tells the remote which device to operate. These limits are designed to provide reasonable protection against control. the Manual Code Search. If your device hasn’t turned off Because this remote controls more than one device, TV CODE SAT•CBL•STREAM CODE two seconds to see if your device turns off again. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY harmful interference in a residential installation. This equipment keypad. If you’re programming the TV or yet, try a different search method. • Make sure the batteries are fresh and are properly installed. generates, uses and can radiate radio frequency energy and, if not 2. you must fi rst “tell” the remote which device you wish IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE Replace the batteries with two new AA batteries, if necessary installed and used in accordance with the instructions, may cause NOTES SAT•CBL•STREAM key, go to step 3. to operate. That means, if you wish to operate your TV, 1 5 AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE harmful interference to radio communications. However, there is no Brand Code Search (see the Battery Installation section). Admiral ...... PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. Advent ...... Aiko ...... you must fi rst press the TV key to put the remote in the Akai ...... 10812, 11675, 10060, Albatrona Action ...... If you’re programming the TV or Americ...... 2. guarantee that interference will not occur in a particular installation. If ...... 10156, 107 Anam AOC ...... If you’re programming the DVD•VCR key, you need Find the Code List that came with Apex Digital The Brand Code Search goes through only the codes for one 2. Code Lists Audiovox ...... 10451, 10180, 10 ...... 10875, 1 Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... this equipment does cause harmful interference to radio or television Brand Codes are used for programming using the Brand Code Search ...... Throughout the programming of each key, be sure to BenQ ...... TV Mode. The remote stays in that device mode until This Warranty is in lieu of all other express warranties or liabilities. ANY Bradford ...... arcas son utilizados para programar utilizando SAT•CBL•STREAM key, go to step 3. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... to tell the remote which kind of device you want this Testing the Code for Maximum Functionality SAT CABLE DTV CONVERTER Los códigos de las m Carver Point the remote directly at the io the remote. Locate the section for los métodos de búsqueda y entrada de códigos de marcas, resaltado Celera ...... of the select brands listed in the accompanying code list. If anghong ...... reception, which can be determined by turning the equipment off and 7. Ch Citizen ...... Problem: The remote will not change channels on device. TV ony Toshiba Viz Brand Code List/Lista de Códigos de Marcas Clarion Commercial Solutions ...... IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF Concerto ...... keep the remote pointed at the IR sensor of the device you press a different device key. For example, if your Contec ...... STREAMING PLAYER Panasonic Samsung Sharp S Magnavox Craig ...... Philips Crosleyn ...... s ...... JVC w on, the user is encouraged to try to correct the interference by one or Cro RCA Insignia Curtis Mathe key to control, VCR or DVD. GE ...... front panel of the device you want CAN 1. Try a variety of the device’s functions with the remote. the type of device you’re trying to PROS ymphonic ...... your brand of device is listed, this search can be very quick S CXC ...... If you’re programming the DVD•VCR key, you need VCR Cytron o...... o ...... MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 0123456789 Daew • Make sure the remote is in the correct mode by pressing i Panasonic Sharp Sony Toshiba Dell ...... d Visio more of the following measures: x Mitsubish Denon ...... you are currently programming the remote to control. Magnavo remote is in TV Mode and you want to operate the DVD Diamon Philips JVC Dumont ...... Durabrand...... RCA Samsung a GE Dwin Dynex ..... to control. Press POWER on the PROSCAN Electrogr If some features of your devices don’t work, go to the program, and fi nd your brand in DVD BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL and easy. Electrohrso msung Sharp Sony Toshib 0123456789 Eme to tell the remote which kind of device you want this • Reorient or relocate the receiving antenna...... the corresponding device key (TV, SAT•CBL•STREAM, Panasonic Pioneer Sa Empr Magnavox Env Press and hold the DVD•VCR key. While you’re holding ips Phil VC ESA player, you must press the DVD•VCR key to change Fi Apex J RCA F GE DVD•VCR CODE Panasonic PROSCAN AMNIO ADB THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL Magnavox • Increase the separation between the equipment and receiver. Philips remote and wait 2 seconds. The Scientific 0123456789ta next step to try a different code. that section. Circle the codes for SAT/CABLE Hughes Atlan Network key to control, VCR or DVD. Test the remote with the device to make sure the General Systems DVD•VCR). This tells the remote which device to operate. Dish Network Instruments Systems/ Echostar down the DVD•VCR key, use your other hand to press device modes. RCA Motorola DirecTV GE DAMAGES WHATSOEVER. No person or representative is authorized • Connect the equipment into an outlet on a circuit different from that TIPS: Each device key is associated with a type of device— PROSCAN remote is testing a single code for your brand and keep them handy. 0123456789 device key is programmed with the correct code for to which the receiver is connected. the TV is preset to search for TVs, SAT•CBL•STREAM for Press and hold the DVD•VCR key. While you’re holding the number key for the type of device you want to 2. Repeat the Manual Code Search from the beginning. • Press the OK key after you enter a channel number. to assume for the Company any liability other than expressed herein in • Consult the dealer or an experienced radio/TV technician for help. your device’s brand. maximum functionality. If some features don’t work, try satellite receivers, cable boxes, digital TV converters, or down the DVD•VCR key, use your other hand to press control with this key: 2 for VCR, 3 for DVD. When the device turns off for the fi rst time, don’t • Remove any obstacles between the remote and the device. connection with the sale of this product. Caution: Any Changes or modifi cations not expressly approved by the a different code. See the “Testing the Code for Maximum press the STOP key, which would store the same code. Backlighting party responsible for compliance could void the user’s authority to streaming media players and DVD•VCR for VCRs or DVD Did your device turn off? 3. Press and hold the device key you want to program the number key for the type of device you want to Make sure to aim the remote at the IR sensor on the device. Some states/provinces do not allow limitations on how long an implied operate this equipment. Functionality” section below for more information. Instead, with the unit now off, continue to press the DVD VCR warranty lasts or the exclusion or limitation of incidental or consequential players. (the POWER key comes on). control with this key: 2 for VCR, 3 for DVD. Backlight illumination helps you see the remote control YES: Press the STOP key to store the code. You’re POWER key repeatedly until the unit turns back on. damage so the above limitations or exclusions may not apply to you. During the Auto Code Search, the remote ignores keys better in the dark. You can turn backlight illumination Problem: The device’s menu does not appear on the TV Industry Canada Regulatory Information The POWER key serves as an indicator light during done! You’ve programmed this device key. This Warranty gives you specifi c legal rights and you may also have This class B digital apparatus complies with Canadian ICES-003 While you’re holding down the device key, use your 3. Once the unit turns back on, you have found another on or off by pressing the LIGHT key ( ). Backlighting screen. programming, giving you feedback at each stage of the keypresses that aren’t part of the search. other rights, which vary from state/province to state/province. Avis d’Industrie Canada other hand enter the fi rst fi ve-digit code for your brand code that operates the device. Press the STOP key. stays on as long as keys are being pressed and turns off six process. NO: Press POWER again. The remote tests the next • Make sure you have connected the device to your TV properly U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New Cet appareil numérique de la classe B est conforme a la nome in the code list (the POWER key goes off after the fi rst The search times out after two minutes (the POWER key seconds after the last keypress. Once the backlight time has Troubleshooting NMB-003du Canada code for your brand. 4. Test the key’s functionality again by trying a variety and selected the correct input. (See your devices’ Owner’s York 11788 digit). blinks four times and turns off, and the last programmed timed out, any keypress will reactivate it. If the backlight To exit without saving a new code at any point in the Brand of functions. If the code controls the majority of the Manuals for proper connection procedures.) CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, SAVE THIS MANUAL AND THE CODE LISTS! Code Search, press the GO BACK key. Keep pressing POWER every 2 seconds until your code under that device key is retained). illumination is on, and you press the backlight key, the Problem: The remote does not operate your device. Unit 3, Door 16, Mississauga, Ontario L5T 3A5 Remote controls can sometimes lose their programming when device turns off. When it does, press STOP. device’s functions, programming is complete. If the • Make sure the remote is in the correct mode by pressing backlight turns off. • Make sure the remote is in the correct mode by pressing you change the batteries. Make sure you keep the manual and The POWER key blinks four times and turns off when the code stored does not give maximum functionality, try the corresponding device key (TV, SAT•CBL•STREAM, code lists in a safe place so that you can reprogram the remote the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate. remote has gone through all the codes. The remote exits another code. if you need to. 1. Manually turn on the device NOTES DVD•VCR). This tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to you want to control. Throughout the programming of each key, be sure to the Auto Code Search. If your device hasn’t turned off Congratulations on your purchase of this 3-device RCA yet, try a different search method. Advanced Functions • Remove any obstacles between the remote and the device. use your original remote control to access menu functions Universal Remote Control. This remote features a library keep the remote pointed at the IR sensor of the device Tour of the Remote Make sure you’re aiming the remote at the device’s IR for some devices. of codes with the latest devices of all major brands, with you are currently programming the remote to control. sensor. support for streaming media players as well. The navigation Code Retrieval For more information, please visit Test the remote with the device to make sure the • Make sure the batteries are fresh and are properly installed. keys have been redesigned to function seamlessly with the 2. If you’re programming the TV or 3. Press and hold the device key you want to program. Once you’ve programmed the remote to control your www.RCAAudioVideo.com device key is programmed with the correct code for Testing the Code for Maximum Functionality In most cases, the keys Replace the batteries with two new AA batteries, if necessary more sophisticated menu and guide systems found in today’s SAT•CBL•STREAM key, go to step 3. While you’re holding down the device key, use your devices, you may want to record the codes for future Consumer Help Line: 1-800-420-7968 maximum functionality. If some features don’t work, try 3. Press and hold the device key you want to program. 1. Try a variety of the device’s functions with the remote. on this remote perform (see the Battery Installation section). home entertainment devices. other hand to press and hold the remote’s POWER key reference. If you used the Direct Code Entry method, this If you’re programming the DVD•VCR key, you need a different code. See the “Testing the Code for Maximum While you’re holding down the device key, use your If some device features don’t work, go to next step to the same functions at the same time. is easy. Just fi nd the codes you entered and make a note to tell the remote which kind of device you want this Functionality” section below for more information. other hand to press and hold the remote’s POWER key try a different code. as the keys on your Problem: The remote can’t be programmed to operate Care and Maintenance of them in the boxes below. If you used one of the Code key to control, VCR or DVD. During the Brand Code Search, the remote ignores at the same time. original remotes once your device. • Keep the remote dry. If it gets wet, wipe it dry Step 1: Install your batteries 2. Repeat the Auto Code Search Method from the Search methods to program your remote or if you used the keypresses that aren’t part of the search. you’ve programmed this • If you are testing the remote while programming it, you may immediately. Press and hold the DVD•VCR key. While you’re holding beginning. When your device turns off, do not stop Direct Entry method but don’t remember the code, you will The search times out after two minutes (the POWER key remote to operate your be too far away from the device or at a wrong angle. There • Use and store the remote only in normal temperature Your universal remote requires two AA alkaline batteries down the DVD•VCR key, use your other hand to press 4. When you’ve fi nished entering the fi ve-digit code, keep searching. Instead, with the unit now off, continue to need to retrieve each device’s fi ve-digit code. Retrieving (batteries may or may not be included, depending on model). blinks four times and turns off, and the last programmed components. Many keys must be an unobstructed path between the remote and the environments. the number key for the type of device you want to holding down the device key and look at the POWER press the PLAY key every 5 seconds until the unit turns the actual code and writing it down will save you time code under that device key is retained). key. on this remote have other IR sensor on the device. Move closer and make sure you • Handle the remote gently and carefully. Don’t drop it. To install the batteries: control with this key: 2 for VCR, 3 for DVD. back on. if you ever need to program the remote again (e.g., if point the remote at the device you’re trying to control. The POWER key blinks four times and turns off when the functions as well. Is the POWER key on? 3. Once the unit turns back on, press the REVERSE key programming is lost when you change the batteries). If the • Keep the remote away from dust and dirt. 1. Remove the battery compartment remote has gone through all the codes. The remote exits • If you’re using the Direct Entry programming method cover. YES: You’re done! You’ve programmed this device key. on the remote every 2 seconds until your device turns Illuminated POWER key codes are recorded, you can use the Direct Entry method • Wipe the remote with a damp cloth occasionally to keep it the Brand Code Search. If your device hasn’t turned off to enter the codes for your brand and the unit is still not off again. When your device turns off again, press the 4. Wait until the POWER key comes on and stays on. serves as an indicator to reprogram your remote to control your devices, which is looking new. 2. Insert the batteries, matching the yet, try a different search method. NO, it blinked four times and turned off: You have functioning properly, try the auto, brand, or manual search Then release both keys. light to provide feedback. quick and easy. • Modifying or tampering with the remote’s internal devices batteries to the (+) and (–) marks either entered a code number that is not in the code lists 4. Wait until the POWER key comes on and stays on. STOP key. method. inside the battery compartment. can cause malfunction and invalidate its warranty. or missed a step in the code entry procedure. Try step 3 Then release both keys. 4. Test the key’s functionality again by attempting to Device keys (TV, • To control combo units, like TV/VCRs or TV/DVDs, you must Testing the Code for Maximum Functionality 5. Point the remote directly at the front panel of the device POWER key 3. Push the battery cover back into again. control a variety of the device’s functions. If the code SAT•CBL•STREAM, 1. Press and hold the device program the individual corresponding device keys to control place. you want to control. Press POWER on the remote and 1. Try a variety of the device’s functions with the remote. that has been stored controls the majority of the DVD•VCR) put the remote key (TV, SAT•CBL•STREAM, each part of the combo unit. Once programmed successfully, NOTES 5. Point the remote directly at the wait 2 seconds. The remote is testing a single code for the TV key controls the TV functions, and the DVD•VCR key If some device features don’t work, go to the next step device’s functions, programming is complete. If the in the right mode to DVD•VCR) whose code you front panel of the device you your device. controls the VCR or DVD functions. Battery Precautions: to try a different code. Remember to enter the code for future reference in the code stored does not give maximum functionality, try control your device. wish to retrieve. The POWER • Do not mix old and new batteries. want to control. Press PLAY on another code. Did your device turn off? key turns on. Keep pressing • Make sure the batteries are fresh and are properly installed. 2. Repeat the Brand Code Search from the beginning. box provided in the Code Retrieval section of this manual. • Do not mix alkaline, standard (carbon-zinc) or the remote and wait 5 seconds. LIGHT key ( ) turns the device key. When the device turns off for the fi rst time, don’t If your brand isn’t listed in the code list, use one of the YES: Press the STOP key to store rechargeable (nickel-cadmium) batteries. The remote is testing a batch of backlighting on/off. Problem: The remote doesn’t perform commands properly. • Always remove old, weak or worn-out batteries promptly press the STOP key, which would store the same code. Code Search methods to program the remote control. 10 codes on your device. the code. You’re done! You’ve • Make sure the remote is in the correct mode by pressing and recycle or dispose of them in accordance with Local Instead, with the unit now off, continue to press the (Refer to the Auto and Manual Code Search methods.) programmed this device key. GUIDE/HOME and MENU and National Regulations. Manual Code Search 2. While holding the device key down, press and hold the the corresponding device key (TV, SAT•CBL•STREAM, POWER key repeatedly until the unit turns back on. access the same features If you release the device key any time during the Direct The Manual Code Search lets you go one-by-one through NO: Press POWER again. The INFO-OPTIONS key. The POWER key turns off. After DVD•VCR). This tells the remote which device to operate. Did your device turn off? all the codes for the device you’re trying to control. When as the keys on your 3. Once the unit turns back on, you have found another Code Entry procedure, the POWER key blinks four times, remote tests the next code for holding down both keys for three seconds, the POWER • Make sure device is ready (for example, the DVD player has Admiral ...... Battery Saver Advent ...... Aiko ...... original remotes. Akai ...... 10812, 11675, 10060, Albatron you fi nd the one that operates your device, you can stop the America...... Action ...... key turns back on. Anam ...... 10156, 107 your device. AOC ...... code that operates the device. Press the STOP key. Apex Digital and the process is exited. The last programmed code a disc loaded). Code Lists Audiovox ...... 10451, 10180, 100 YES: Go to step 6. Find your device’s brand in the ...... 10875, 1 Your universal remote control saves battery power by 3. Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... Brand Codes are used for programming using the Brand Code Search ...... BenQ ...... Bradford search and store that code. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... Los códigos de las marcas son utilizados para programar utilizando Carver under the device key is retained. Celera ...... 3. Release both keys. The POWER key remains on. automatically turning off if any key is pressed for more than los métodos de búsqueda y entrada de códigos de marcas, resaltado Arrow keys act as Brand Code list section of the Changhong ...... Citizen ...... • You may have pressed an invalid key for the mode the remote is TV Clarion 4. Test the key’s functionality again by attempting to Keep pressing POWER every 2 Brand Code List/Lista de Códigos de Marcas Commercial Solutions ...... Concerto ...... Contec ...... NO: Press PLAY again. The remote tests the next batch Panasonic Samsung Sharp Sony Toshiba Vizio Magnavox Craig ...... Philips Crosley ...... JVC 60 seconds. This saves your battery life should your remote Crown ...... RCA Insignia Curtis Mathes ...... accompanying code list. Circle GE ...... navigation keys for PROSCAN Symphonic ...... in. VCR CXC ...... Cytron ...... control a variety of the device’s functions. If the code seconds until your device turns off. 0123456789 4. Starting with the number 1 key, press and release each Daewoo ...... Dell ...... TIPS: Each device key is associated with a type of device— Mitsubishi Panasonic Sharp Sony Toshiba of 10 codes. Denon ...... Magnavox Test the remote with the device to make sure the device Diamond Visio get stuck in a place where the keys remain depressed, such Philips JVC Dumont ...... Durabrand...... RCA Samsung GE Dwin Dynex ..... streaming media players the number for your brand and PROSCAN DVD Electrogr ©2013 Voxx Accessories Corp. Electroh When it does, press STOP. 0123456789 Emerso that has been stored controls the majority of the number key on the keypad in the following order: 1-9, ...... the TV is preset to search for TVs, SAT•CBL•STREAM for • If you’re trying to enter a channel number directly, try as between sofa cushions. Panasonic Pioneer Samsung Sharp Sony Toshiba Empr Magnavox Env Philips key is programmed with the correct code for maximum ESA Fi Apex JVC RCA F GE Panasonic PROSCAN AMNIO Keep pressing PLAY every 5 seconds until your device as well as in menu and keep the list handy. ADB Magnavox Philips 3502 Woodview Trace, Suite 220 0123456789SAT/CABLE Scientific Hughes Atlanta device’s functions, programming is complete. If the then 0. The number that causes the POWER key to pressing the OK key after entering the channel number as Network satellite receivers, cable boxes, digital TV converters, or General Systems Dish Network Instruments TIP: Because there are so many codes, you may have to Systems/tar functionality. If some features don’t work, try a different Echos RCA Motorola DirecTV Actual model may vary from GE PROSCAN turns off. guide systems for other Indianapolis, IN 46268 0123456789 code stored does not give maximum functionality, try code in the list. streaming media players, and DVD•VCR for VCRs or DVD press the POWER key many times—possibly hundreds of blink is the fi rst number of the code. As you fi nd each this is a requirement of certain models and brands. devices. illustration another code. players. times. number of the code, write it down for future reference. Trademark(s) ® Registered RCR314WR US 04 Step 2: Program your remote 4. Press and hold the device key you want to program. Direct Code Entry Auto Code Search 6. When your device turns off, press The POWER key serves as an indicator light during NOTES CHAN and VOL keys act as channel and volume controllers. Note: All TV codes begin with the number 1; all VCR • There is a possibility that a programmed code may only be Limited Lifetime Warranty While you’re holding down the device key, use your Direct Code Entry lets you enter a code from the The Auto Code Search goes automatically through all the the REVERSE key on the remote programming, giving you feedback at each stage of the Throughout the programming of each key, keep the The CHAN keys also provide skip forward and skip back and DVR codes begin with the number 2; all DVDs, able to control some of your device features (for example, process. only turns a device on and off). To confi rm that the device other hand to press and hold the remote’s POWER key accompanying code list for your brand of device. It’s not as codes for the device you’re trying to control. When you fi nd and wait at least 2 seconds. remote pointed at the IR sensor of the device you are control for DVD players and DVRs that support this the number 3; and all satellite receivers, cable boxes, To use this universal remote with your home entertainment key is programmed with the correct code for maximum at the same time. easy as the other methods, but it’s potentially the fastest the one that operates your device, you can stop the search The remote tries the last of the The Manual Code Search method may take a long time programming the remote to control. functionality. streaming players, and DTV converters, the number 5. functionality, test the device. Attempt to control a variety VOXX Accessories Corporation (the “Company”) warrants to you the system, fi rst you need to program it to control your devices. previous ten codes. because the remote searches through all of the codes in original retail purchaser of this product that should it, under normal use method. and store that code. GO BACK exits remote programming; it also performs the 5. Repeat step 4 until you have retrieved all fi ve numbers of the device’s functions with the remote. If some of the There are four ways you can program the universal remote its memory one-by-one. If your brand is listed in the Brand Test the remote with the device to make sure the and conditions, be proven defective in material or workmanship during Did your device turn on? device key is programmed with the correct code for same functions as on your original remotes. in the code. After the fi fth number is retrieved, the features of your devices don’t work, try programming the Universal Remote Control to operate your devices. Try them in the order listed here: TIP: Each device key is associated with a type of device—the Codes or the Code Lists, fi rst try the Brand Code Search or its lifetime while you own it, such defect(s) will be repaired or replaced TIPS: Each device key is associated with a type maximum functionality. If some features don’t work, try POWER key blinks briefl y, then turns off. remote with a different code in the list using the Direct Code (at the Company’s option) without charge for parts and repair labor. TV is preset to search for TVs, SAT•CBL•STREAM for YES: Press the STOP key. You’re the Direct Code Entry method. • The Brand Code Search searches through the codes of device—the TV is preset to search for TVs, a different code. See the “Testing the Code for Maximum The INPUT and — (dash) key has three functions: (1) it Entry Method, until you fi nd the code that allows the remote To obtain repair or replacement within the terms of this Warranty, the Owner’s Manual satellite receivers, cable boxes, digital TV converters, or done! You’ve programmed this TIP: To exit the Code Retrieval Mode at any time, press for select brands of devices. SAT•CBL•STREAM for satellite receivers, cable boxes, To exit without saving a new code at any point in the Functionality” section below for more information. toggles through all the video sources connected to your TV; to control the majority of your device’s functions. Different product is to be delivered with proof of warranty coverage (e.g. dated bill streaming media players, and DVD•VCR for VCRs or DVD device key. the GO BACK key. RCR314WR / RCR313BR digital TV converters, or streaming media players, and Manual Code Search, press the GO BACK key. (2) when the remote is in VCR mode, this button toggles codes can provide different levels of functionality. of sale), specifi cation of defect(s), transportation prepaid, to the Company • The Direct Code Entry lets you enter a code from the players. During the Manual Code Search, the remote ignores between VCR and the TV input; (3) when you’re entering Note: If you press an invalid key during the Code at the address shown below. Manual del Propietario (parte posterior) DVD•VCR for VCRs or DVD players. keypresses that aren’t part of the search. accompanying code list for your brand of device. The POWER key serves as an indicator light during NO: Press REVERSE again. The remote tests the next digital channel numbers directly, this button lets you Retrieval process, the remote will not respond. If Problem: The POWER key does not light when you press a This Warranty does not cover product purchased, serviced or used 5. Wait until the POWER key comes on and stays on. To exit without saving a new code at any point in the you do not press a valid Code Retrieval key (TV, outside the United States or Canada. This Warranty is not transferable programming, giving you feedback at each stage of the code in the batch. 1. Manually turn on the device you The search times out after two minutes (the POWER key separate the main channel number from the sub-channel key. FCC Statement: • The Auto Code Search goes automatically through all Then release both keys. Auto Code Search, press the GO BACK key. SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), and does not extend to costs incurred for installation, removal or process. want to control. blinks four times and turns off, and the last programmed number (such as 59.1). • You may have pressed an invalid key for the mode the This device complies with part 15 of the FCC Rules. Operation is subject the codes for the device you’re trying to control. Keep pressing REVERSE every 2 seconds until your Code Retrieval times out after 15 seconds. The POWER reinstallation of the product. This Warranty does not apply if in the to the following two conditions: (1) This device may not cause harmful device turns back on. When it does, press STOP. code under that device key is retained). remote is in. Company’s opinion, the product has been damaged through alteration, interference, and (2) this device must accept any interference received, 1. Manually turn on the device you key blinks four times, and then turns off. • The Manual Code Search lets you manually go 6. Look at the number you circled for 1. Manually turn on the device you • Make sure the remote is in the correct mode by pressing improper installation, mishandling, misuse, neglect, accident, or the including interference that may cause undesired operation. want to control. Note: If you accidentally press the REVERSE key after The POWER key blinks four times and turns off when the IMPORTANT Note: This equipment has been tested and found to comply with the through all the codes for the device you’re trying to your device’s brand code number. want to control. the corresponding device key (TV, SAT•CBL•STREAM, simultaneous use of different battery types (e.g. alkaline, standard or your device turns on, press the FORWARD key. Then, wait remote has gone through all the codes. The remote exits rechargeable). limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Press that number on the remote DVD•VCR). This tells the remote which device to operate. These limits are designed to provide reasonable protection against control. the Manual Code Search. If your device hasn’t turned off Because this remote controls more than one device, TV CODE SAT•CBL•STREAM CODE two seconds to see if your device turns off again. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY harmful interference in a residential installation. This equipment keypad. If you’re programming the TV or yet, try a different search method. • Make sure the batteries are fresh and are properly installed. generates, uses and can radiate radio frequency energy and, if not 2. you must fi rst “tell” the remote which device you wish IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE Replace the batteries with two new AA batteries, if necessary installed and used in accordance with the instructions, may cause NOTES SAT•CBL•STREAM key, go to step 3. to operate. That means, if you wish to operate your TV, 1 5 AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE harmful interference to radio communications. However, there is no Brand Code Search (see the Battery Installation section). Admiral ...... PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. Advent ...... Aiko ...... you must fi rst press the TV key to put the remote in the Akai ...... 10812, 11675, 10060, Albatrona Action ...... If you’re programming the TV or Americ...... 2. guarantee that interference will not occur in a particular installation. If ...... 10156, 107 Anam AOC ...... If you’re programming the DVD•VCR key, you need Find the Code List that came with Apex Digital The Brand Code Search goes through only the codes for one 2. Code Lists Audiovox ...... 10451, 10180, 10 ...... 10875, 1 Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... this equipment does cause harmful interference to radio or television Brand Codes are used for programming using the Brand Code Search ...... Throughout the programming of each key, be sure to BenQ ...... TV Mode. The remote stays in that device mode until This Warranty is in lieu of all other express warranties or liabilities. ANY Bradford ...... arcas son utilizados para programar utilizando SAT•CBL•STREAM key, go to step 3. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... to tell the remote which kind of device you want this Testing the Code for Maximum Functionality SAT CABLE DTV CONVERTER Los códigos de las m Carver Point the remote directly at the io the remote. Locate the section for los métodos de búsqueda y entrada de códigos de marcas, resaltado Celera ...... of the select brands listed in the accompanying code list. If anghong ...... reception, which can be determined by turning the equipment off and 7. Ch Citizen ...... Problem: The remote will not change channels on device. TV ony Toshiba Viz Brand Code List/Lista de Códigos de Marcas Clarion Commercial Solutions ...... IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF Concerto ...... keep the remote pointed at the IR sensor of the device you press a different device key. For example, if your Contec ...... STREAMING PLAYER Panasonic Samsung Sharp S Magnavox Craig ...... Philips Crosleyn ...... s ...... JVC w on, the user is encouraged to try to correct the interference by one or Cro RCA Insignia Curtis Mathe key to control, VCR or DVD. GE ...... front panel of the device you want CAN 1. Try a variety of the device’s functions with the remote. the type of device you’re trying to PROS ymphonic ...... your brand of device is listed, this search can be very quick S CXC ...... If you’re programming the DVD•VCR key, you need VCR Cytron o...... o ...... MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 0123456789 Daew • Make sure the remote is in the correct mode by pressing i Panasonic Sharp Sony Toshiba Dell ...... d Visio more of the following measures: x Mitsubish Denon ...... you are currently programming the remote to control. Magnavo remote is in TV Mode and you want to operate the DVD Diamon Philips JVC Dumont ...... Durabrand...... RCA Samsung a GE Dwin Dynex ..... to control. Press POWER on the PROSCAN Electrogr If some features of your devices don’t work, go to the program, and fi nd your brand in DVD BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL and easy. Electrohrso msung Sharp Sony Toshib 0123456789 Eme to tell the remote which kind of device you want this • Reorient or relocate the receiving antenna...... the corresponding device key (TV, SAT•CBL•STREAM, Panasonic Pioneer Sa Empr Magnavox Env Press and hold the DVD•VCR key. While you’re holding ips Phil VC ESA player, you must press the DVD•VCR key to change Fi Apex J RCA F GE DVD•VCR CODE Panasonic PROSCAN AMNIO ADB THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL Magnavox • Increase the separation between the equipment and receiver. Philips remote and wait 2 seconds. The Scientific 0123456789ta next step to try a different code. that section. Circle the codes for SAT/CABLE Hughes Atlan Network key to control, VCR or DVD. Test the remote with the device to make sure the General Systems DVD•VCR). This tells the remote which device to operate. Dish Network Instruments Systems/ Echostar down the DVD•VCR key, use your other hand to press device modes. RCA Motorola DirecTV GE DAMAGES WHATSOEVER. No person or representative is authorized • Connect the equipment into an outlet on a circuit different from that TIPS: Each device key is associated with a type of device— PROSCAN remote is testing a single code for your brand and keep them handy. 0123456789 device key is programmed with the correct code for to which the receiver is connected. the TV is preset to search for TVs, SAT•CBL•STREAM for Press and hold the DVD•VCR key. While you’re holding the number key for the type of device you want to 2. Repeat the Manual Code Search from the beginning. • Press the OK key after you enter a channel number. to assume for the Company any liability other than expressed herein in • Consult the dealer or an experienced radio/TV technician for help. your device’s brand. maximum functionality. If some features don’t work, try satellite receivers, cable boxes, digital TV converters, or down the DVD•VCR key, use your other hand to press control with this key: 2 for VCR, 3 for DVD. When the device turns off for the fi rst time, don’t • Remove any obstacles between the remote and the device. connection with the sale of this product. Caution: Any Changes or modifi cations not expressly approved by the a different code. See the “Testing the Code for Maximum press the STOP key, which would store the same code. Backlighting party responsible for compliance could void the user’s authority to streaming media players and DVD•VCR for VCRs or DVD Did your device turn off? 3. Press and hold the device key you want to program the number key for the type of device you want to Make sure to aim the remote at the IR sensor on the device. Some states/provinces do not allow limitations on how long an implied operate this equipment. Functionality” section below for more information. Instead, with the unit now off, continue to press the DVD VCR warranty lasts or the exclusion or limitation of incidental or consequential players. (the POWER key comes on). control with this key: 2 for VCR, 3 for DVD. Backlight illumination helps you see the remote control YES: Press the STOP key to store the code. You’re POWER key repeatedly until the unit turns back on. damage so the above limitations or exclusions may not apply to you. During the Auto Code Search, the remote ignores keys better in the dark. You can turn backlight illumination Problem: The device’s menu does not appear on the TV Industry Canada Regulatory Information The POWER key serves as an indicator light during done! You’ve programmed this device key. This Warranty gives you specifi c legal rights and you may also have This class B digital apparatus complies with Canadian ICES-003 While you’re holding down the device key, use your 3. Once the unit turns back on, you have found another on or off by pressing the LIGHT key ( ). Backlighting screen. programming, giving you feedback at each stage of the keypresses that aren’t part of the search. other rights, which vary from state/province to state/province. Avis d’Industrie Canada other hand enter the fi rst fi ve-digit code for your brand code that operates the device. Press the STOP key. stays on as long as keys are being pressed and turns off six process. NO: Press POWER again. The remote tests the next • Make sure you have connected the device to your TV properly U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New Cet appareil numérique de la classe B est conforme a la nome in the code list (the POWER key goes off after the fi rst The search times out after two minutes (the POWER key seconds after the last keypress. Once the backlight time has Troubleshooting NMB-003du Canada code for your brand. 4. Test the key’s functionality again by trying a variety and selected the correct input. (See your devices’ Owner’s York 11788 digit). blinks four times and turns off, and the last programmed timed out, any keypress will reactivate it. If the backlight To exit without saving a new code at any point in the Brand of functions. If the code controls the majority of the Manuals for proper connection procedures.) CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, SAVE THIS MANUAL AND THE CODE LISTS! Code Search, press the GO BACK key. Keep pressing POWER every 2 seconds until your code under that device key is retained). illumination is on, and you press the backlight key, the Problem: The remote does not operate your device. Unit 3, Door 16, Mississauga, Ontario L5T 3A5 Remote controls can sometimes lose their programming when device turns off. When it does, press STOP. device’s functions, programming is complete. If the • Make sure the remote is in the correct mode by pressing backlight turns off. • Make sure the remote is in the correct mode by pressing you change the batteries. Make sure you keep the manual and The POWER key blinks four times and turns off when the code stored does not give maximum functionality, try the corresponding device key (TV, SAT•CBL•STREAM, code lists in a safe place so that you can reprogram the remote the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate. remote has gone through all the codes. The remote exits another code. if you need to. 1. Manually turn on the device NOTES DVD•VCR). This tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to you want to control. Throughout the programming of each key, be sure to the Auto Code Search. If your device hasn’t turned off Congratulations on your purchase of this 3-device RCA yet, try a different search method. Advanced Functions • Remove any obstacles between the remote and the device. use your original remote control to access menu functions Universal Remote Control. This remote features a library keep the remote pointed at the IR sensor of the device Tour of the Remote Make sure you’re aiming the remote at the device’s IR for some devices. of codes with the latest devices of all major brands, with you are currently programming the remote to control. sensor. support for streaming media players as well. The navigation Code Retrieval For more information, please visit Test the remote with the device to make sure the • Make sure the batteries are fresh and are properly installed. keys have been redesigned to function seamlessly with the 2. If you’re programming the TV or 3. Press and hold the device key you want to program. Once you’ve programmed the remote to control your www.RCAAudioVideo.com device key is programmed with the correct code for Testing the Code for Maximum Functionality In most cases, the keys Replace the batteries with two new AA batteries, if necessary more sophisticated menu and guide systems found in today’s SAT•CBL•STREAM key, go to step 3. While you’re holding down the device key, use your devices, you may want to record the codes for future Consumer Help Line: 1-800-420-7968 maximum functionality. If some features don’t work, try 3. Press and hold the device key you want to program. 1. Try a variety of the device’s functions with the remote. on this remote perform (see the Battery Installation section). home entertainment devices. other hand to press and hold the remote’s POWER key reference. If you used the Direct Code Entry method, this If you’re programming the DVD•VCR key, you need a different code. See the “Testing the Code for Maximum While you’re holding down the device key, use your If some device features don’t work, go to next step to the same functions at the same time. is easy. Just fi nd the codes you entered and make a note to tell the remote which kind of device you want this Functionality” section below for more information. other hand to press and hold the remote’s POWER key try a different code. as the keys on your Problem: The remote can’t be programmed to operate Care and Maintenance of them in the boxes below. If you used one of the Code key to control, VCR or DVD. During the Brand Code Search, the remote ignores at the same time. original remotes once your device. • Keep the remote dry. If it gets wet, wipe it dry Step 1: Install your batteries 2. Repeat the Auto Code Search Method from the Search methods to program your remote or if you used the keypresses that aren’t part of the search. you’ve programmed this • If you are testing the remote while programming it, you may immediately. Press and hold the DVD•VCR key. While you’re holding beginning. When your device turns off, do not stop Direct Entry method but don’t remember the code, you will The search times out after two minutes (the POWER key remote to operate your be too far away from the device or at a wrong angle. There • Use and store the remote only in normal temperature Your universal remote requires two AA alkaline batteries down the DVD•VCR key, use your other hand to press 4. When you’ve fi nished entering the fi ve-digit code, keep searching. Instead, with the unit now off, continue to need to retrieve each device’s fi ve-digit code. Retrieving (batteries may or may not be included, depending on model). blinks four times and turns off, and the last programmed components. Many keys must be an unobstructed path between the remote and the environments. the number key for the type of device you want to holding down the device key and look at the POWER press the PLAY key every 5 seconds until the unit turns the actual code and writing it down will save you time code under that device key is retained). key. on this remote have other IR sensor on the device. Move closer and make sure you • Handle the remote gently and carefully. Don’t drop it. To install the batteries: control with this key: 2 for VCR, 3 for DVD. back on. if you ever need to program the remote again (e.g., if point the remote at the device you’re trying to control. The POWER key blinks four times and turns off when the functions as well. Is the POWER key on? 3. Once the unit turns back on, press the REVERSE key programming is lost when you change the batteries). If the • Keep the remote away from dust and dirt. 1. Remove the battery compartment remote has gone through all the codes. The remote exits • If you’re using the Direct Entry programming method cover. YES: You’re done! You’ve programmed this device key. on the remote every 2 seconds until your device turns Illuminated POWER key codes are recorded, you can use the Direct Entry method • Wipe the remote with a damp cloth occasionally to keep it the Brand Code Search. If your device hasn’t turned off to enter the codes for your brand and the unit is still not off again. When your device turns off again, press the 4. Wait until the POWER key comes on and stays on. serves as an indicator to reprogram your remote to control your devices, which is looking new. 2. Insert the batteries, matching the yet, try a different search method. NO, it blinked four times and turned off: You have functioning properly, try the auto, brand, or manual search Then release both keys. light to provide feedback. quick and easy. • Modifying or tampering with the remote’s internal devices batteries to the (+) and (–) marks either entered a code number that is not in the code lists 4. Wait until the POWER key comes on and stays on. STOP key. method. inside the battery compartment. can cause malfunction and invalidate its warranty. or missed a step in the code entry procedure. Try step 3 Then release both keys. 4. Test the key’s functionality again by attempting to Device keys (TV, • To control combo units, like TV/VCRs or TV/DVDs, you must Testing the Code for Maximum Functionality 5. Point the remote directly at the front panel of the device POWER key 3. Push the battery cover back into again. control a variety of the device’s functions. If the code SAT•CBL•STREAM, 1. Press and hold the device program the individual corresponding device keys to control place. you want to control. Press POWER on the remote and 1. Try a variety of the device’s functions with the remote. that has been stored controls the majority of the DVD•VCR) put the remote key (TV, SAT•CBL•STREAM, each part of the combo unit. Once programmed successfully, NOTES 5. Point the remote directly at the wait 2 seconds. The remote is testing a single code for the TV key controls the TV functions, and the DVD•VCR key If some device features don’t work, go to the next step device’s functions, programming is complete. If the in the right mode to DVD•VCR) whose code you front panel of the device you your device. controls the VCR or DVD functions. Battery Precautions: to try a different code. Remember to enter the code for future reference in the code stored does not give maximum functionality, try control your device. wish to retrieve. The POWER • Do not mix old and new batteries. want to control. Press PLAY on another code. Did your device turn off? key turns on. Keep pressing • Make sure the batteries are fresh and are properly installed. 2. Repeat the Brand Code Search from the beginning. box provided in the Code Retrieval section of this manual. • Do not mix alkaline, standard (carbon-zinc) or the remote and wait 5 seconds. LIGHT key ( ) turns the device key. When the device turns off for the fi rst time, don’t If your brand isn’t listed in the code list, use one of the YES: Press the STOP key to store rechargeable (nickel-cadmium) batteries. The remote is testing a batch of backlighting on/off. Problem: The remote doesn’t perform commands properly. • Always remove old, weak or worn-out batteries promptly press the STOP key, which would store the same code. Code Search methods to program the remote control. 10 codes on your device. the code. You’re done! You’ve • Make sure the remote is in the correct mode by pressing and recycle or dispose of them in accordance with Local Instead, with the unit now off, continue to press the (Refer to the Auto and Manual Code Search methods.) programmed this device key. GUIDE/HOME and MENU and National Regulations. Manual Code Search 2. While holding the device key down, press and hold the the corresponding device key (TV, SAT•CBL•STREAM, POWER key repeatedly until the unit turns back on. access the same features If you release the device key any time during the Direct The Manual Code Search lets you go one-by-one through NO: Press POWER again. The INFO-OPTIONS key. The POWER key turns off. After DVD•VCR). This tells the remote which device to operate. Did your device turn off? all the codes for the device you’re trying to control. When as the keys on your 3. Once the unit turns back on, you have found another Code Entry procedure, the POWER key blinks four times, remote tests the next code for holding down both keys for three seconds, the POWER • Make sure device is ready (for example, the DVD player has Admiral ...... Battery Saver Advent ...... Aiko ...... original remotes. Akai ...... 10812, 11675, 10060, Albatron you fi nd the one that operates your device, you can stop the America...... Action ...... key turns back on. Anam ...... 10156, 107 your device. AOC ...... code that operates the device. Press the STOP key. Apex Digital and the process is exited. The last programmed code a disc loaded). Code Lists Audiovox ...... 10451, 10180, 100 YES: Go to step 6. Find your device’s brand in the ...... 10875, 1 Your universal remote control saves battery power by 3. Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... Brand Codes are used for programming using the Brand Code Search ...... BenQ ...... Bradford search and store that code. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... Los códigos de las marcas son utilizados para programar utilizando Carver under the device key is retained. Celera ...... 3. Release both keys. The POWER key remains on. automatically turning off if any key is pressed for more than los métodos de búsqueda y entrada de códigos de marcas, resaltado Arrow keys act as Brand Code list section of the Changhong ...... Citizen ...... • You may have pressed an invalid key for the mode the remote is TV Clarion 4. Test the key’s functionality again by attempting to Keep pressing POWER every 2 Brand Code List/Lista de Códigos de Marcas Commercial Solutions ...... Concerto ...... Contec ...... NO: Press PLAY again. The remote tests the next batch Panasonic Samsung Sharp Sony Toshiba Vizio Magnavox Craig ...... Philips Crosley ...... JVC 60 seconds. This saves your battery life should your remote Crown ...... RCA Insignia Curtis Mathes ...... accompanying code list. Circle GE ...... navigation keys for PROSCAN Symphonic ...... in. VCR CXC ...... Cytron ...... control a variety of the device’s functions. If the code seconds until your device turns off. 0123456789 4. Starting with the number 1 key, press and release each Daewoo ...... Dell ...... TIPS: Each device key is associated with a type of device— Mitsubishi Panasonic Sharp Sony Toshiba of 10 codes. Denon ...... Magnavox Test the remote with the device to make sure the device Diamond Visio get stuck in a place where the keys remain depressed, such Philips JVC Dumont ...... Durabrand...... RCA Samsung GE Dwin Dynex ..... streaming media players the number for your brand and PROSCAN DVD Electrogr ©2013 Voxx Accessories Corp. Electroh When it does, press STOP. 0123456789 Emerso that has been stored controls the majority of the number key on the keypad in the following order: 1-9, ...... the TV is preset to search for TVs, SAT•CBL•STREAM for • If you’re trying to enter a channel number directly, try as between sofa cushions. Panasonic Pioneer Samsung Sharp Sony Toshiba Empr Magnavox Env Philips key is programmed with the correct code for maximum ESA Fi Apex JVC RCA F GE Panasonic PROSCAN AMNIO Keep pressing PLAY every 5 seconds until your device as well as in menu and keep the list handy. ADB Magnavox Philips 3502 Woodview Trace, Suite 220 0123456789SAT/CABLE Scientific Hughes Atlanta device’s functions, programming is complete. If the then 0. The number that causes the POWER key to pressing the OK key after entering the channel number as Network satellite receivers, cable boxes, digital TV converters, or General Systems Dish Network Instruments TIP: Because there are so many codes, you may have to Systems/tar functionality. If some features don’t work, try a different Echos RCA Motorola DirecTV Actual model may vary from GE PROSCAN turns off. guide systems for other Indianapolis, IN 46268 0123456789 code stored does not give maximum functionality, try code in the list. streaming media players, and DVD•VCR for VCRs or DVD press the POWER key many times—possibly hundreds of blink is the fi rst number of the code. As you fi nd each this is a requirement of certain models and brands. devices. illustration another code. players. times. number of the code, write it down for future reference. Trademark(s) ® Registered RCR314WR US 04 Step 2: Program your remote 4. Press and hold the device key you want to program. Direct Code Entry Auto Code Search 6. When your device turns off, press The POWER key serves as an indicator light during NOTES CHAN and VOL keys act as channel and volume controllers. Note: All TV codes begin with the number 1; all VCR • There is a possibility that a programmed code may only be Limited Lifetime Warranty While you’re holding down the device key, use your Direct Code Entry lets you enter a code from the The Auto Code Search goes automatically through all the the REVERSE key on the remote programming, giving you feedback at each stage of the Throughout the programming of each key, keep the The CHAN keys also provide skip forward and skip back and DVR codes begin with the number 2; all DVDs, able to control some of your device features (for example, process. only turns a device on and off). To confi rm that the device other hand to press and hold the remote’s POWER key accompanying code list for your brand of device. It’s not as codes for the device you’re trying to control. When you fi nd and wait at least 2 seconds. remote pointed at the IR sensor of the device you are control for DVD players and DVRs that support this the number 3; and all satellite receivers, cable boxes, To use this universal remote with your home entertainment key is programmed with the correct code for maximum at the same time. easy as the other methods, but it’s potentially the fastest the one that operates your device, you can stop the search The remote tries the last of the The Manual Code Search method may take a long time programming the remote to control. functionality. streaming players, and DTV converters, the number 5. functionality, test the device. Attempt to control a variety VOXX Accessories Corporation (the “Company”) warrants to you the system, fi rst you need to program it to control your devices. previous ten codes. because the remote searches through all of the codes in original retail purchaser of this product that should it, under normal use method. and store that code. GO BACK exits remote programming; it also performs the 5. Repeat step 4 until you have retrieved all fi ve numbers of the device’s functions with the remote. If some of the There are four ways you can program the universal remote its memory one-by-one. If your brand is listed in the Brand Test the remote with the device to make sure the and conditions, be proven defective in material or workmanship during Did your device turn on? device key is programmed with the correct code for same functions as on your original remotes. in the code. After the fi fth number is retrieved, the features of your devices don’t work, try programming the Universal Remote Control to operate your devices. Try them in the order listed here: TIP: Each device key is associated with a type of device—the Codes or the Code Lists, fi rst try the Brand Code Search or its lifetime while you own it, such defect(s) will be repaired or replaced TIPS: Each device key is associated with a type maximum functionality. If some features don’t work, try POWER key blinks briefl y, then turns off. remote with a different code in the list using the Direct Code (at the Company’s option) without charge for parts and repair labor. TV is preset to search for TVs, SAT•CBL•STREAM for YES: Press the STOP key. You’re the Direct Code Entry method. • The Brand Code Search searches through the codes of device—the TV is preset to search for TVs, a different code. See the “Testing the Code for Maximum The INPUT and — (dash) key has three functions: (1) it Entry Method, until you fi nd the code that allows the remote To obtain repair or replacement within the terms of this Warranty, the Owner’s Manual satellite receivers, cable boxes, digital TV converters, or done! You’ve programmed this TIP: To exit the Code Retrieval Mode at any time, press for select brands of devices. SAT•CBL•STREAM for satellite receivers, cable boxes, To exit without saving a new code at any point in the Functionality” section below for more information. toggles through all the video sources connected to your TV; to control the majority of your device’s functions. Different product is to be delivered with proof of warranty coverage (e.g. dated bill streaming media players, and DVD•VCR for VCRs or DVD device key. the GO BACK key. RCR314WR / RCR313BR digital TV converters, or streaming media players, and Manual Code Search, press the GO BACK key. (2) when the remote is in VCR mode, this button toggles codes can provide different levels of functionality. of sale), specifi cation of defect(s), transportation prepaid, to the Company • The Direct Code Entry lets you enter a code from the players. During the Manual Code Search, the remote ignores between VCR and the TV input; (3) when you’re entering Note: If you press an invalid key during the Code at the address shown below. Manual del Propietario (parte posterior) DVD•VCR for VCRs or DVD players. keypresses that aren’t part of the search. accompanying code list for your brand of device. The POWER key serves as an indicator light during NO: Press REVERSE again. The remote tests the next digital channel numbers directly, this button lets you Retrieval process, the remote will not respond. If Problem: The POWER key does not light when you press a This Warranty does not cover product purchased, serviced or used 5. Wait until the POWER key comes on and stays on. To exit without saving a new code at any point in the you do not press a valid Code Retrieval key (TV, outside the United States or Canada. This Warranty is not transferable programming, giving you feedback at each stage of the code in the batch. 1. Manually turn on the device you The search times out after two minutes (the POWER key separate the main channel number from the sub-channel key. FCC Statement: • The Auto Code Search goes automatically through all Then release both keys. Auto Code Search, press the GO BACK key. SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), and does not extend to costs incurred for installation, removal or process. want to control. blinks four times and turns off, and the last programmed number (such as 59.1). • You may have pressed an invalid key for the mode the This device complies with part 15 of the FCC Rules. Operation is subject the codes for the device you’re trying to control. Keep pressing REVERSE every 2 seconds until your Code Retrieval times out after 15 seconds. The POWER reinstallation of the product. This Warranty does not apply if in the to the following two conditions: (1) This device may not cause harmful device turns back on. When it does, press STOP. code under that device key is retained). remote is in. Company’s opinion, the product has been damaged through alteration, interference, and (2) this device must accept any interference received, 1. Manually turn on the device you key blinks four times, and then turns off. • The Manual Code Search lets you manually go 6. Look at the number you circled for 1. Manually turn on the device you • Make sure the remote is in the correct mode by pressing improper installation, mishandling, misuse, neglect, accident, or the including interference that may cause undesired operation. want to control. Note: If you accidentally press the REVERSE key after The POWER key blinks four times and turns off when the IMPORTANT Note: This equipment has been tested and found to comply with the through all the codes for the device you’re trying to your device’s brand code number. want to control. the corresponding device key (TV, SAT•CBL•STREAM, simultaneous use of different battery types (e.g. alkaline, standard or your device turns on, press the FORWARD key. Then, wait remote has gone through all the codes. The remote exits rechargeable). limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Press that number on the remote DVD•VCR). This tells the remote which device to operate. These limits are designed to provide reasonable protection against control. the Manual Code Search. If your device hasn’t turned off Because this remote controls more than one device, TV CODE SAT•CBL•STREAM CODE two seconds to see if your device turns off again. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY harmful interference in a residential installation. This equipment keypad. If you’re programming the TV or yet, try a different search method. • Make sure the batteries are fresh and are properly installed. generates, uses and can radiate radio frequency energy and, if not 2. you must fi rst “tell” the remote which device you wish IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE Replace the batteries with two new AA batteries, if necessary installed and used in accordance with the instructions, may cause NOTES SAT•CBL•STREAM key, go to step 3. to operate. That means, if you wish to operate your TV, 1 5 AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE harmful interference to radio communications. However, there is no Brand Code Search (see the Battery Installation section). Admiral ...... PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. Advent ...... Aiko ...... you must fi rst press the TV key to put the remote in the Akai ...... 10812, 11675, 10060, Albatrona Action ...... If you’re programming the TV or Americ...... 2. guarantee that interference will not occur in a particular installation. If ...... 10156, 107 Anam AOC ...... If you’re programming the DVD•VCR key, you need Find the Code List that came with Apex Digital The Brand Code Search goes through only the codes for one 2. Code Lists Audiovox ...... 10451, 10180, 10 ...... 10875, 1 Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... this equipment does cause harmful interference to radio or television Brand Codes are used for programming using the Brand Code Search ...... Throughout the programming of each key, be sure to BenQ ...... TV Mode. The remote stays in that device mode until This Warranty is in lieu of all other express warranties or liabilities. ANY Bradford ...... arcas son utilizados para programar utilizando SAT•CBL•STREAM key, go to step 3. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... to tell the remote which kind of device you want this Testing the Code for Maximum Functionality SAT CABLE DTV CONVERTER Los códigos de las m Carver Point the remote directly at the io the remote. Locate the section for los métodos de búsqueda y entrada de códigos de marcas, resaltado Celera ...... of the select brands listed in the accompanying code list. If anghong ...... reception, which can be determined by turning the equipment off and 7. Ch Citizen ...... Problem: The remote will not change channels on device. TV ony Toshiba Viz Brand Code List/Lista de Códigos de Marcas Clarion Commercial Solutions ...... IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF Concerto ...... keep the remote pointed at the IR sensor of the device you press a different device key. For example, if your Contec ...... STREAMING PLAYER Panasonic Samsung Sharp S Magnavox Craig ...... Philips Crosleyn ...... s ...... JVC w on, the user is encouraged to try to correct the interference by one or Cro RCA Insignia Curtis Mathe key to control, VCR or DVD. GE ...... front panel of the device you want CAN 1. Try a variety of the device’s functions with the remote. the type of device you’re trying to PROS ymphonic ...... your brand of device is listed, this search can be very quick S CXC ...... If you’re programming the DVD•VCR key, you need VCR Cytron o...... o ...... MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 0123456789 Daew • Make sure the remote is in the correct mode by pressing i Panasonic Sharp Sony Toshiba Dell ...... d Visio more of the following measures: x Mitsubish Denon ...... you are currently programming the remote to control. Magnavo remote is in TV Mode and you want to operate the DVD Diamon Philips JVC Dumont ...... Durabrand...... RCA Samsung a GE Dwin Dynex ..... to control. Press POWER on the PROSCAN Electrogr If some features of your devices don’t work, go to the program, and fi nd your brand in DVD BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL and easy. Electrohrso msung Sharp Sony Toshib 0123456789 Eme to tell the remote which kind of device you want this • Reorient or relocate the receiving antenna...... the corresponding device key (TV, SAT•CBL•STREAM, Panasonic Pioneer Sa Empr Magnavox Env Press and hold the DVD•VCR key. While you’re holding ips Phil VC ESA player, you must press the DVD•VCR key to change Fi Apex J RCA F GE DVD•VCR CODE Panasonic PROSCAN AMNIO ADB THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL Magnavox • Increase the separation between the equipment and receiver. Philips remote and wait 2 seconds. The Scientific 0123456789ta next step to try a different code. that section. Circle the codes for SAT/CABLE Hughes Atlan Network key to control, VCR or DVD. Test the remote with the device to make sure the General Systems DVD•VCR). This tells the remote which device to operate. Dish Network Instruments Systems/ Echostar down the DVD•VCR key, use your other hand to press device modes. RCA Motorola DirecTV GE DAMAGES WHATSOEVER. No person or representative is authorized • Connect the equipment into an outlet on a circuit different from that TIPS: Each device key is associated with a type of device— PROSCAN remote is testing a single code for your brand and keep them handy. 0123456789 device key is programmed with the correct code for to which the receiver is connected. the TV is preset to search for TVs, SAT•CBL•STREAM for Press and hold the DVD•VCR key. While you’re holding the number key for the type of device you want to 2. Repeat the Manual Code Search from the beginning. • Press the OK key after you enter a channel number. to assume for the Company any liability other than expressed herein in • Consult the dealer or an experienced radio/TV technician for help. your device’s brand. maximum functionality. If some features don’t work, try satellite receivers, cable boxes, digital TV converters, or down the DVD•VCR key, use your other hand to press control with this key: 2 for VCR, 3 for DVD. When the device turns off for the fi rst time, don’t • Remove any obstacles between the remote and the device. connection with the sale of this product. Caution: Any Changes or modifi cations not expressly approved by the a different code. See the “Testing the Code for Maximum press the STOP key, which would store the same code. Backlighting party responsible for compliance could void the user’s authority to streaming media players and DVD•VCR for VCRs or DVD Did your device turn off? 3. Press and hold the device key you want to program the number key for the type of device you want to Make sure to aim the remote at the IR sensor on the device. Some states/provinces do not allow limitations on how long an implied operate this equipment. Functionality” section below for more information. Instead, with the unit now off, continue to press the DVD VCR warranty lasts or the exclusion or limitation of incidental or consequential players. (the POWER key comes on). control with this key: 2 for VCR, 3 for DVD. Backlight illumination helps you see the remote control YES: Press the STOP key to store the code. You’re POWER key repeatedly until the unit turns back on. damage so the above limitations or exclusions may not apply to you. During the Auto Code Search, the remote ignores keys better in the dark. You can turn backlight illumination Problem: The device’s menu does not appear on the TV Industry Canada Regulatory Information The POWER key serves as an indicator light during done! You’ve programmed this device key. This Warranty gives you specifi c legal rights and you may also have This class B digital apparatus complies with Canadian ICES-003 While you’re holding down the device key, use your 3. Once the unit turns back on, you have found another on or off by pressing the LIGHT key ( ). Backlighting screen. programming, giving you feedback at each stage of the keypresses that aren’t part of the search. other rights, which vary from state/province to state/province. Avis d’Industrie Canada other hand enter the fi rst fi ve-digit code for your brand code that operates the device. Press the STOP key. stays on as long as keys are being pressed and turns off six process. NO: Press POWER again. The remote tests the next • Make sure you have connected the device to your TV properly U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New Cet appareil numérique de la classe B est conforme a la nome in the code list (the POWER key goes off after the fi rst The search times out after two minutes (the POWER key seconds after the last keypress. Once the backlight time has Troubleshooting NMB-003du Canada code for your brand. 4. Test the key’s functionality again by trying a variety and selected the correct input. (See your devices’ Owner’s York 11788 digit). blinks four times and turns off, and the last programmed timed out, any keypress will reactivate it. If the backlight To exit without saving a new code at any point in the Brand of functions. If the code controls the majority of the Manuals for proper connection procedures.) CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, SAVE THIS MANUAL AND THE CODE LISTS! Code Search, press the GO BACK key. Keep pressing POWER every 2 seconds until your code under that device key is retained). illumination is on, and you press the backlight key, the Problem: The remote does not operate your device. Unit 3, Door 16, Mississauga, Ontario L5T 3A5 Remote controls can sometimes lose their programming when device turns off. When it does, press STOP. device’s functions, programming is complete. If the • Make sure the remote is in the correct mode by pressing backlight turns off. • Make sure the remote is in the correct mode by pressing you change the batteries. Make sure you keep the manual and The POWER key blinks four times and turns off when the code stored does not give maximum functionality, try the corresponding device key (TV, SAT•CBL•STREAM, code lists in a safe place so that you can reprogram the remote the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate. remote has gone through all the codes. The remote exits another code. if you need to. 1. Manually turn on the device NOTES DVD•VCR). This tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to you want to control. Throughout the programming of each key, be sure to the Auto Code Search. If your device hasn’t turned off Congratulations on your purchase of this 3-device RCA yet, try a different search method. Advanced Functions • Remove any obstacles between the remote and the device. use your original remote control to access menu functions Universal Remote Control. This remote features a library keep the remote pointed at the IR sensor of the device Tour of the Remote Make sure you’re aiming the remote at the device’s IR for some devices. of codes with the latest devices of all major brands, with you are currently programming the remote to control. sensor. support for streaming media players as well. The navigation Code Retrieval For more information, please visit Test the remote with the device to make sure the • Make sure the batteries are fresh and are properly installed. keys have been redesigned to function seamlessly with the 2. If you’re programming the TV or 3. Press and hold the device key you want to program. Once you’ve programmed the remote to control your www.RCAAudioVideo.com device key is programmed with the correct code for Testing the Code for Maximum Functionality In most cases, the keys Replace the batteries with two new AA batteries, if necessary more sophisticated menu and guide systems found in today’s SAT•CBL•STREAM key, go to step 3. While you’re holding down the device key, use your devices, you may want to record the codes for future Consumer Help Line: 1-800-420-7968 maximum functionality. If some features don’t work, try 3. Press and hold the device key you want to program. 1. Try a variety of the device’s functions with the remote. on this remote perform (see the Battery Installation section). home entertainment devices. other hand to press and hold the remote’s POWER key reference. If you used the Direct Code Entry method, this If you’re programming the DVD•VCR key, you need a different code. See the “Testing the Code for Maximum While you’re holding down the device key, use your If some device features don’t work, go to next step to the same functions at the same time. is easy. Just fi nd the codes you entered and make a note to tell the remote which kind of device you want this Functionality” section below for more information. other hand to press and hold the remote’s POWER key try a different code. as the keys on your Problem: The remote can’t be programmed to operate Care and Maintenance of them in the boxes below. If you used one of the Code key to control, VCR or DVD. During the Brand Code Search, the remote ignores at the same time. original remotes once your device. • Keep the remote dry. If it gets wet, wipe it dry Step 1: Install your batteries 2. Repeat the Auto Code Search Method from the Search methods to program your remote or if you used the keypresses that aren’t part of the search. you’ve programmed this • If you are testing the remote while programming it, you may immediately. Press and hold the DVD•VCR key. While you’re holding beginning. When your device turns off, do not stop Direct Entry method but don’t remember the code, you will The search times out after two minutes (the POWER key remote to operate your be too far away from the device or at a wrong angle. There • Use and store the remote only in normal temperature Your universal remote requires two AA alkaline batteries down the DVD•VCR key, use your other hand to press 4. When you’ve fi nished entering the fi ve-digit code, keep searching. Instead, with the unit now off, continue to need to retrieve each device’s fi ve-digit code. Retrieving (batteries may or may not be included, depending on model). blinks four times and turns off, and the last programmed components. Many keys must be an unobstructed path between the remote and the environments. the number key for the type of device you want to holding down the device key and look at the POWER press the PLAY key every 5 seconds until the unit turns the actual code and writing it down will save you time code under that device key is retained). key. on this remote have other IR sensor on the device. Move closer and make sure you • Handle the remote gently and carefully. Don’t drop it. To install the batteries: control with this key: 2 for VCR, 3 for DVD. back on. if you ever need to program the remote again (e.g., if point the remote at the device you’re trying to control. The POWER key blinks four times and turns off when the functions as well. Is the POWER key on? 3. Once the unit turns back on, press the REVERSE key programming is lost when you change the batteries). If the • Keep the remote away from dust and dirt. 1. Remove the battery compartment remote has gone through all the codes. The remote exits • If you’re using the Direct Entry programming method cover. YES: You’re done! You’ve programmed this device key. on the remote every 2 seconds until your device turns Illuminated POWER key codes are recorded, you can use the Direct Entry method • Wipe the remote with a damp cloth occasionally to keep it the Brand Code Search. If your device hasn’t turned off to enter the codes for your brand and the unit is still not off again. When your device turns off again, press the 4. Wait until the POWER key comes on and stays on. serves as an indicator to reprogram your remote to control your devices, which is looking new. 2. Insert the batteries, matching the yet, try a different search method. NO, it blinked four times and turned off: You have functioning properly, try the auto, brand, or manual search Then release both keys. light to provide feedback. quick and easy. • Modifying or tampering with the remote’s internal devices batteries to the (+) and (–) marks either entered a code number that is not in the code lists 4. Wait until the POWER key comes on and stays on. STOP key. method. inside the battery compartment. can cause malfunction and invalidate its warranty. or missed a step in the code entry procedure. Try step 3 Then release both keys. 4. Test the key’s functionality again by attempting to Device keys (TV, • To control combo units, like TV/VCRs or TV/DVDs, you must Testing the Code for Maximum Functionality 5. Point the remote directly at the front panel of the device POWER key 3. Push the battery cover back into again. control a variety of the device’s functions. If the code SAT•CBL•STREAM, 1. Press and hold the device program the individual corresponding device keys to control place. you want to control. Press POWER on the remote and 1. Try a variety of the device’s functions with the remote. that has been stored controls the majority of the DVD•VCR) put the remote key (TV, SAT•CBL•STREAM, each part of the combo unit. Once programmed successfully, NOTES 5. Point the remote directly at the wait 2 seconds. The remote is testing a single code for the TV key controls the TV functions, and the DVD•VCR key If some device features don’t work, go to the next step device’s functions, programming is complete. If the in the right mode to DVD•VCR) whose code you front panel of the device you your device. controls the VCR or DVD functions. Battery Precautions: to try a different code. Remember to enter the code for future reference in the code stored does not give maximum functionality, try control your device. wish to retrieve. The POWER • Do not mix old and new batteries. want to control. Press PLAY on another code. Did your device turn off? key turns on. Keep pressing • Make sure the batteries are fresh and are properly installed. 2. Repeat the Brand Code Search from the beginning. box provided in the Code Retrieval section of this manual. • Do not mix alkaline, standard (carbon-zinc) or the remote and wait 5 seconds. LIGHT key ( ) turns the device key. When the device turns off for the fi rst time, don’t If your brand isn’t listed in the code list, use one of the YES: Press the STOP key to store rechargeable (nickel-cadmium) batteries. The remote is testing a batch of backlighting on/off. Problem: The remote doesn’t perform commands properly. • Always remove old, weak or worn-out batteries promptly press the STOP key, which would store the same code. Code Search methods to program the remote control. 10 codes on your device. the code. You’re done! You’ve • Make sure the remote is in the correct mode by pressing and recycle or dispose of them in accordance with Local Instead, with the unit now off, continue to press the (Refer to the Auto and Manual Code Search methods.) programmed this device key. GUIDE/HOME and MENU and National Regulations. Manual Code Search 2. While holding the device key down, press and hold the the corresponding device key (TV, SAT•CBL•STREAM, POWER key repeatedly until the unit turns back on. access the same features If you release the device key any time during the Direct The Manual Code Search lets you go one-by-one through NO: Press POWER again. The INFO-OPTIONS key. The POWER key turns off. After DVD•VCR). This tells the remote which device to operate. Did your device turn off? all the codes for the device you’re trying to control. When as the keys on your 3. Once the unit turns back on, you have found another Code Entry procedure, the POWER key blinks four times, remote tests the next code for holding down both keys for three seconds, the POWER • Make sure device is ready (for example, the DVD player has Admiral ...... Battery Saver Advent ...... Aiko ...... original remotes. Akai ...... 10812, 11675, 10060, Albatron you fi nd the one that operates your device, you can stop the America...... Action ...... key turns back on. Anam ...... 10156, 107 your device. AOC ...... code that operates the device. Press the STOP key. Apex Digital and the process is exited. The last programmed code a disc loaded). Code Lists Audiovox ...... 10451, 10180, 100 YES: Go to step 6. Find your device’s brand in the ...... 10875, 1 Your universal remote control saves battery power by 3. Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... Brand Codes are used for programming using the Brand Code Search ...... BenQ ...... Bradford search and store that code. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... Los códigos de las marcas son utilizados para programar utilizando Carver under the device key is retained. Celera ...... 3. Release both keys. The POWER key remains on. automatically turning off if any key is pressed for more than los métodos de búsqueda y entrada de códigos de marcas, resaltado Arrow keys act as Brand Code list section of the Changhong ...... Citizen ...... • You may have pressed an invalid key for the mode the remote is TV Clarion 4. Test the key’s functionality again by attempting to Keep pressing POWER every 2 Brand Code List/Lista de Códigos de Marcas Commercial Solutions ...... Concerto ...... Contec ...... NO: Press PLAY again. The remote tests the next batch Panasonic Samsung Sharp Sony Toshiba Vizio Magnavox Craig ...... Philips Crosley ...... JVC 60 seconds. This saves your battery life should your remote Crown ...... RCA Insignia Curtis Mathes ...... accompanying code list. Circle GE ...... navigation keys for PROSCAN Symphonic ...... in. VCR CXC ...... Cytron ...... control a variety of the device’s functions. If the code seconds until your device turns off. 0123456789 4. Starting with the number 1 key, press and release each Daewoo ...... Dell ...... TIPS: Each device key is associated with a type of device— Mitsubishi Panasonic Sharp Sony Toshiba of 10 codes. Denon ...... Magnavox Test the remote with the device to make sure the device Diamond Visio get stuck in a place where the keys remain depressed, such Philips JVC Dumont ...... Durabrand...... RCA Samsung GE Dwin Dynex ..... streaming media players the number for your brand and PROSCAN DVD Electrogr ©2013 Voxx Accessories Corp. Electroh When it does, press STOP. 0123456789 Emerso that has been stored controls the majority of the number key on the keypad in the following order: 1-9, ...... the TV is preset to search for TVs, SAT•CBL•STREAM for • If you’re trying to enter a channel number directly, try as between sofa cushions. Panasonic Pioneer Samsung Sharp Sony Toshiba Empr Magnavox Env Philips key is programmed with the correct code for maximum ESA Fi Apex JVC RCA F GE Panasonic PROSCAN AMNIO Keep pressing PLAY every 5 seconds until your device as well as in menu and keep the list handy. ADB Magnavox Philips 3502 Woodview Trace, Suite 220 0123456789SAT/CABLE Scientific Hughes Atlanta device’s functions, programming is complete. If the then 0. The number that causes the POWER key to pressing the OK key after entering the channel number as Network satellite receivers, cable boxes, digital TV converters, or General Systems Dish Network Instruments TIP: Because there are so many codes, you may have to Systems/tar functionality. If some features don’t work, try a different Echos RCA Motorola DirecTV Actual model may vary from GE PROSCAN turns off. guide systems for other Indianapolis, IN 46268 0123456789 code stored does not give maximum functionality, try code in the list. streaming media players, and DVD•VCR for VCRs or DVD press the POWER key many times—possibly hundreds of blink is the fi rst number of the code. As you fi nd each this is a requirement of certain models and brands. devices. illustration another code. players. times. number of the code, write it down for future reference. Trademark(s) ® Registered RCR314WR US 04 Step 2: Program your remote 4. Press and hold the device key you want to program. Direct Code Entry Auto Code Search 6. When your device turns off, press The POWER key serves as an indicator light during NOTES CHAN and VOL keys act as channel and volume controllers. Note: All TV codes begin with the number 1; all VCR • There is a possibility that a programmed code may only be Limited Lifetime Warranty While you’re holding down the device key, use your Direct Code Entry lets you enter a code from the The Auto Code Search goes automatically through all the the REVERSE key on the remote programming, giving you feedback at each stage of the Throughout the programming of each key, keep the The CHAN keys also provide skip forward and skip back and DVR codes begin with the number 2; all DVDs, able to control some of your device features (for example, process. only turns a device on and off). To confi rm that the device other hand to press and hold the remote’s POWER key accompanying code list for your brand of device. It’s not as codes for the device you’re trying to control. When you fi nd and wait at least 2 seconds. remote pointed at the IR sensor of the device you are control for DVD players and DVRs that support this the number 3; and all satellite receivers, cable boxes, To use this universal remote with your home entertainment key is programmed with the correct code for maximum at the same time. easy as the other methods, but it’s potentially the fastest the one that operates your device, you can stop the search The remote tries the last of the The Manual Code Search method may take a long time programming the remote to control. functionality. streaming players, and DTV converters, the number 5. functionality, test the device. Attempt to control a variety VOXX Accessories Corporation (the “Company”) warrants to you the system, fi rst you need to program it to control your devices. previous ten codes. because the remote searches through all of the codes in original retail purchaser of this product that should it, under normal use method. and store that code. GO BACK exits remote programming; it also performs the 5. Repeat step 4 until you have retrieved all fi ve numbers of the device’s functions with the remote. If some of the There are four ways you can program the universal remote its memory one-by-one. If your brand is listed in the Brand Test the remote with the device to make sure the and conditions, be proven defective in material or workmanship during Did your device turn on? device key is programmed with the correct code for same functions as on your original remotes. in the code. After the fi fth number is retrieved, the features of your devices don’t work, try programming the Universal Remote Control to operate your devices. Try them in the order listed here: TIP: Each device key is associated with a type of device—the Codes or the Code Lists, fi rst try the Brand Code Search or its lifetime while you own it, such defect(s) will be repaired or replaced TIPS: Each device key is associated with a type maximum functionality. If some features don’t work, try POWER key blinks briefl y, then turns off. remote with a different code in the list using the Direct Code (at the Company’s option) without charge for parts and repair labor. TV is preset to search for TVs, SAT•CBL•STREAM for YES: Press the STOP key. You’re the Direct Code Entry method. • The Brand Code Search searches through the codes of device—the TV is preset to search for TVs, a different code. See the “Testing the Code for Maximum The INPUT and — (dash) key has three functions: (1) it Entry Method, until you fi nd the code that allows the remote To obtain repair or replacement within the terms of this Warranty, the Owner’s Manual satellite receivers, cable boxes, digital TV converters, or done! You’ve programmed this TIP: To exit the Code Retrieval Mode at any time, press for select brands of devices. SAT•CBL•STREAM for satellite receivers, cable boxes, To exit without saving a new code at any point in the Functionality” section below for more information. toggles through all the video sources connected to your TV; to control the majority of your device’s functions. Different product is to be delivered with proof of warranty coverage (e.g. dated bill streaming media players, and DVD•VCR for VCRs or DVD device key. the GO BACK key. RCR314WR / RCR313BR digital TV converters, or streaming media players, and Manual Code Search, press the GO BACK key. (2) when the remote is in VCR mode, this button toggles codes can provide different levels of functionality. of sale), specifi cation of defect(s), transportation prepaid, to the Company • The Direct Code Entry lets you enter a code from the players. During the Manual Code Search, the remote ignores between VCR and the TV input; (3) when you’re entering Note: If you press an invalid key during the Code at the address shown below. Manual del Propietario (parte posterior) DVD•VCR for VCRs or DVD players. keypresses that aren’t part of the search. accompanying code list for your brand of device. The POWER key serves as an indicator light during NO: Press REVERSE again. The remote tests the next digital channel numbers directly, this button lets you Retrieval process, the remote will not respond. If Problem: The POWER key does not light when you press a This Warranty does not cover product purchased, serviced or used 5. Wait until the POWER key comes on and stays on. To exit without saving a new code at any point in the you do not press a valid Code Retrieval key (TV, outside the United States or Canada. This Warranty is not transferable programming, giving you feedback at each stage of the code in the batch. 1. Manually turn on the device you The search times out after two minutes (the POWER key separate the main channel number from the sub-channel key. FCC Statement: • The Auto Code Search goes automatically through all Then release both keys. Auto Code Search, press the GO BACK key. SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), and does not extend to costs incurred for installation, removal or process. want to control. blinks four times and turns off, and the last programmed number (such as 59.1). • You may have pressed an invalid key for the mode the This device complies with part 15 of the FCC Rules. Operation is subject the codes for the device you’re trying to control. Keep pressing REVERSE every 2 seconds until your Code Retrieval times out after 15 seconds. The POWER reinstallation of the product. This Warranty does not apply if in the to the following two conditions: (1) This device may not cause harmful device turns back on. When it does, press STOP. code under that device key is retained). remote is in. Company’s opinion, the product has been damaged through alteration, interference, and (2) this device must accept any interference received, 1. Manually turn on the device you key blinks four times, and then turns off. • The Manual Code Search lets you manually go 6. Look at the number you circled for 1. Manually turn on the device you • Make sure the remote is in the correct mode by pressing improper installation, mishandling, misuse, neglect, accident, or the including interference that may cause undesired operation. want to control. Note: If you accidentally press the REVERSE key after The POWER key blinks four times and turns off when the IMPORTANT Note: This equipment has been tested and found to comply with the through all the codes for the device you’re trying to your device’s brand code number. want to control. the corresponding device key (TV, SAT•CBL•STREAM, simultaneous use of different battery types (e.g. alkaline, standard or your device turns on, press the FORWARD key. Then, wait remote has gone through all the codes. The remote exits rechargeable). limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Press that number on the remote DVD•VCR). This tells the remote which device to operate. These limits are designed to provide reasonable protection against control. the Manual Code Search. If your device hasn’t turned off Because this remote controls more than one device, TV CODE SAT•CBL•STREAM CODE two seconds to see if your device turns off again. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY harmful interference in a residential installation. This equipment keypad. If you’re programming the TV or yet, try a different search method. • Make sure the batteries are fresh and are properly installed. generates, uses and can radiate radio frequency energy and, if not 2. you must fi rst “tell” the remote which device you wish IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE Replace the batteries with two new AA batteries, if necessary installed and used in accordance with the instructions, may cause NOTES SAT•CBL•STREAM key, go to step 3. to operate. That means, if you wish to operate your TV, 1 5 AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE harmful interference to radio communications. However, there is no Brand Code Search (see the Battery Installation section). Admiral ...... PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. Advent ...... Aiko ...... you must fi rst press the TV key to put the remote in the Akai ...... 10812, 11675, 10060, Albatrona Action ...... If you’re programming the TV or Americ...... 2. guarantee that interference will not occur in a particular installation. If ...... 10156, 107 Anam AOC ...... If you’re programming the DVD•VCR key, you need Find the Code List that came with Apex Digital The Brand Code Search goes through only the codes for one 2. Code Lists Audiovox ...... 10451, 10180, 10 ...... 10875, 1 Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... this equipment does cause harmful interference to radio or television Brand Codes are used for programming using the Brand Code Search ...... Throughout the programming of each key, be sure to BenQ ...... TV Mode. The remote stays in that device mode until This Warranty is in lieu of all other express warranties or liabilities. ANY Bradford ...... arcas son utilizados para programar utilizando SAT•CBL•STREAM key, go to step 3. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... to tell the remote which kind of device you want this Testing the Code for Maximum Functionality SAT CABLE DTV CONVERTER Los códigos de las m Carver Point the remote directly at the io the remote. Locate the section for los métodos de búsqueda y entrada de códigos de marcas, resaltado Celera ...... of the select brands listed in the accompanying code list. If anghong ...... reception, which can be determined by turning the equipment off and 7. Ch Citizen ...... Problem: The remote will not change channels on device. TV ony Toshiba Viz Brand Code List/Lista de Códigos de Marcas Clarion Commercial Solutions ...... IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF Concerto ...... keep the remote pointed at the IR sensor of the device you press a different device key. For example, if your Contec ...... STREAMING PLAYER Panasonic Samsung Sharp S Magnavox Craig ...... Philips Crosleyn ...... s ...... JVC w on, the user is encouraged to try to correct the interference by one or Cro RCA Insignia Curtis Mathe key to control, VCR or DVD. GE ...... front panel of the device you want CAN 1. Try a variety of the device’s functions with the remote. the type of device you’re trying to PROS ymphonic ...... your brand of device is listed, this search can be very quick S CXC ...... If you’re programming the DVD•VCR key, you need VCR Cytron o...... o ...... MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 0123456789 Daew • Make sure the remote is in the correct mode by pressing i Panasonic Sharp Sony Toshiba Dell ...... d Visio more of the following measures: x Mitsubish Denon ...... you are currently programming the remote to control. Magnavo remote is in TV Mode and you want to operate the DVD Diamon Philips JVC Dumont ...... Durabrand...... RCA Samsung a GE Dwin Dynex ..... to control. Press POWER on the PROSCAN Electrogr If some features of your devices don’t work, go to the program, and fi nd your brand in DVD BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL and easy. Electrohrso msung Sharp Sony Toshib 0123456789 Eme to tell the remote which kind of device you want this • Reorient or relocate the receiving antenna...... the corresponding device key (TV, SAT•CBL•STREAM, Panasonic Pioneer Sa Empr Magnavox Env Press and hold the DVD•VCR key. While you’re holding ips Phil VC ESA player, you must press the DVD•VCR key to change Fi Apex J RCA F GE DVD•VCR CODE Panasonic PROSCAN AMNIO ADB THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL Magnavox • Increase the separation between the equipment and receiver. Philips remote and wait 2 seconds. The Scientific 0123456789ta next step to try a different code. that section. Circle the codes for SAT/CABLE Hughes Atlan Network key to control, VCR or DVD. Test the remote with the device to make sure the General Systems DVD•VCR). This tells the remote which device to operate. Dish Network Instruments Systems/ Echostar down the DVD•VCR key, use your other hand to press device modes. RCA Motorola DirecTV GE DAMAGES WHATSOEVER. No person or representative is authorized • Connect the equipment into an outlet on a circuit different from that TIPS: Each device key is associated with a type of device— PROSCAN remote is testing a single code for your brand and keep them handy. 0123456789 device key is programmed with the correct code for to which the receiver is connected. the TV is preset to search for TVs, SAT•CBL•STREAM for Press and hold the DVD•VCR key. While you’re holding the number key for the type of device you want to 2. Repeat the Manual Code Search from the beginning. • Press the OK key after you enter a channel number. to assume for the Company any liability other than expressed herein in • Consult the dealer or an experienced radio/TV technician for help. your device’s brand. maximum functionality. If some features don’t work, try satellite receivers, cable boxes, digital TV converters, or down the DVD•VCR key, use your other hand to press control with this key: 2 for VCR, 3 for DVD. When the device turns off for the fi rst time, don’t • Remove any obstacles between the remote and the device. connection with the sale of this product. Caution: Any Changes or modifi cations not expressly approved by the a different code. See the “Testing the Code for Maximum press the STOP key, which would store the same code. Backlighting party responsible for compliance could void the user’s authority to streaming media players and DVD•VCR for VCRs or DVD Did your device turn off? 3. Press and hold the device key you want to program the number key for the type of device you want to Make sure to aim the remote at the IR sensor on the device. Some states/provinces do not allow limitations on how long an implied operate this equipment. Functionality” section below for more information. Instead, with the unit now off, continue to press the DVD VCR warranty lasts or the exclusion or limitation of incidental or consequential players. (the POWER key comes on). control with this key: 2 for VCR, 3 for DVD. Backlight illumination helps you see the remote control YES: Press the STOP key to store the code. You’re POWER key repeatedly until the unit turns back on. damage so the above limitations or exclusions may not apply to you. During the Auto Code Search, the remote ignores keys better in the dark. You can turn backlight illumination Problem: The device’s menu does not appear on the TV Industry Canada Regulatory Information The POWER key serves as an indicator light during done! You’ve programmed this device key. This Warranty gives you specifi c legal rights and you may also have This class B digital apparatus complies with Canadian ICES-003 While you’re holding down the device key, use your 3. Once the unit turns back on, you have found another on or off by pressing the LIGHT key ( ). Backlighting screen. programming, giving you feedback at each stage of the keypresses that aren’t part of the search. other rights, which vary from state/province to state/province. Avis d’Industrie Canada other hand enter the fi rst fi ve-digit code for your brand code that operates the device. Press the STOP key. stays on as long as keys are being pressed and turns off six process. NO: Press POWER again. The remote tests the next • Make sure you have connected the device to your TV properly U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New Cet appareil numérique de la classe B est conforme a la nome in the code list (the POWER key goes off after the fi rst The search times out after two minutes (the POWER key seconds after the last keypress. Once the backlight time has Troubleshooting NMB-003du Canada code for your brand. 4. Test the key’s functionality again by trying a variety and selected the correct input. (See your devices’ Owner’s York 11788 digit). blinks four times and turns off, and the last programmed timed out, any keypress will reactivate it. If the backlight To exit without saving a new code at any point in the Brand of functions. If the code controls the majority of the Manuals for proper connection procedures.) CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, SAVE THIS MANUAL AND THE CODE LISTS! Code Search, press the GO BACK key. Keep pressing POWER every 2 seconds until your code under that device key is retained). illumination is on, and you press the backlight key, the Problem: The remote does not operate your device. Unit 3, Door 16, Mississauga, Ontario L5T 3A5 Remote controls can sometimes lose their programming when device turns off. When it does, press STOP. device’s functions, programming is complete. If the • Make sure the remote is in the correct mode by pressing backlight turns off. • Make sure the remote is in the correct mode by pressing you change the batteries. Make sure you keep the manual and The POWER key blinks four times and turns off when the code stored does not give maximum functionality, try the corresponding device key (TV, SAT•CBL•STREAM, code lists in a safe place so that you can reprogram the remote the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate. remote has gone through all the codes. The remote exits another code. if you need to. 1. Manually turn on the device NOTES DVD•VCR). This tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to you want to control. Throughout the programming of each key, be sure to the Auto Code Search. If your device hasn’t turned off Congratulations on your purchase of this 3-device RCA yet, try a different search method. Advanced Functions • Remove any obstacles between the remote and the device. use your original remote control to access menu functions Universal Remote Control. This remote features a library keep the remote pointed at the IR sensor of the device Tour of the Remote Make sure you’re aiming the remote at the device’s IR for some devices. of codes with the latest devices of all major brands, with you are currently programming the remote to control. sensor. support for streaming media players as well. The navigation Code Retrieval For more information, please visit Test the remote with the device to make sure the • Make sure the batteries are fresh and are properly installed. keys have been redesigned to function seamlessly with the 2. If you’re programming the TV or 3. Press and hold the device key you want to program. Once you’ve programmed the remote to control your www.RCAAudioVideo.com device key is programmed with the correct code for Testing the Code for Maximum Functionality In most cases, the keys Replace the batteries with two new AA batteries, if necessary more sophisticated menu and guide systems found in today’s SAT•CBL•STREAM key, go to step 3. While you’re holding down the device key, use your devices, you may want to record the codes for future Consumer Help Line: 1-800-420-7968 maximum functionality. If some features don’t work, try 3. Press and hold the device key you want to program. 1. Try a variety of the device’s functions with the remote. on this remote perform (see the Battery Installation section). home entertainment devices. other hand to press and hold the remote’s POWER key reference. If you used the Direct Code Entry method, this If you’re programming the DVD•VCR key, you need a different code. See the “Testing the Code for Maximum While you’re holding down the device key, use your If some device features don’t work, go to next step to the same functions at the same time. is easy. Just fi nd the codes you entered and make a note to tell the remote which kind of device you want this Functionality” section below for more information. other hand to press and hold the remote’s POWER key try a different code. as the keys on your Problem: The remote can’t be programmed to operate Care and Maintenance of them in the boxes below. If you used one of the Code key to control, VCR or DVD. During the Brand Code Search, the remote ignores at the same time. original remotes once your device. • Keep the remote dry. If it gets wet, wipe it dry Step 1: Install your batteries 2. Repeat the Auto Code Search Method from the Search methods to program your remote or if you used the keypresses that aren’t part of the search. you’ve programmed this • If you are testing the remote while programming it, you may immediately. Press and hold the DVD•VCR key. While you’re holding beginning. When your device turns off, do not stop Direct Entry method but don’t remember the code, you will The search times out after two minutes (the POWER key remote to operate your be too far away from the device or at a wrong angle. There • Use and store the remote only in normal temperature Your universal remote requires two AA alkaline batteries down the DVD•VCR key, use your other hand to press 4. When you’ve fi nished entering the fi ve-digit code, keep searching. Instead, with the unit now off, continue to need to retrieve each device’s fi ve-digit code. Retrieving (batteries may or may not be included, depending on model). blinks four times and turns off, and the last programmed components. Many keys must be an unobstructed path between the remote and the environments. the number key for the type of device you want to holding down the device key and look at the POWER press the PLAY key every 5 seconds until the unit turns the actual code and writing it down will save you time code under that device key is retained). key. on this remote have other IR sensor on the device. Move closer and make sure you • Handle the remote gently and carefully. Don’t drop it. To install the batteries: control with this key: 2 for VCR, 3 for DVD. back on. if you ever need to program the remote again (e.g., if point the remote at the device you’re trying to control. The POWER key blinks four times and turns off when the functions as well. Is the POWER key on? 3. Once the unit turns back on, press the REVERSE key programming is lost when you change the batteries). If the • Keep the remote away from dust and dirt. 1. Remove the battery compartment remote has gone through all the codes. The remote exits • If you’re using the Direct Entry programming method cover. YES: You’re done! You’ve programmed this device key. on the remote every 2 seconds until your device turns Illuminated POWER key codes are recorded, you can use the Direct Entry method • Wipe the remote with a damp cloth occasionally to keep it the Brand Code Search. If your device hasn’t turned off to enter the codes for your brand and the unit is still not off again. When your device turns off again, press the 4. Wait until the POWER key comes on and stays on. serves as an indicator to reprogram your remote to control your devices, which is looking new. 2. Insert the batteries, matching the yet, try a different search method. NO, it blinked four times and turned off: You have functioning properly, try the auto, brand, or manual search Then release both keys. light to provide feedback. quick and easy. • Modifying or tampering with the remote’s internal devices batteries to the (+) and (–) marks either entered a code number that is not in the code lists 4. Wait until the POWER key comes on and stays on. STOP key. method. inside the battery compartment. can cause malfunction and invalidate its warranty. or missed a step in the code entry procedure. Try step 3 Then release both keys. 4. Test the key’s functionality again by attempting to Device keys (TV, • To control combo units, like TV/VCRs or TV/DVDs, you must Testing the Code for Maximum Functionality 5. Point the remote directly at the front panel of the device POWER key 3. Push the battery cover back into again. control a variety of the device’s functions. If the code SAT•CBL•STREAM, 1. Press and hold the device program the individual corresponding device keys to control place. you want to control. Press POWER on the remote and 1. Try a variety of the device’s functions with the remote. that has been stored controls the majority of the DVD•VCR) put the remote key (TV, SAT•CBL•STREAM, each part of the combo unit. Once programmed successfully, NOTES 5. Point the remote directly at the wait 2 seconds. The remote is testing a single code for the TV key controls the TV functions, and the DVD•VCR key If some device features don’t work, go to the next step device’s functions, programming is complete. If the in the right mode to DVD•VCR) whose code you front panel of the device you your device. controls the VCR or DVD functions. Battery Precautions: to try a different code. Remember to enter the code for future reference in the code stored does not give maximum functionality, try control your device. wish to retrieve. The POWER • Do not mix old and new batteries. want to control. Press PLAY on another code. Did your device turn off? key turns on. Keep pressing • Make sure the batteries are fresh and are properly installed. 2. Repeat the Brand Code Search from the beginning. box provided in the Code Retrieval section of this manual. • Do not mix alkaline, standard (carbon-zinc) or the remote and wait 5 seconds. LIGHT key ( ) turns the device key. When the device turns off for the fi rst time, don’t If your brand isn’t listed in the code list, use one of the YES: Press the STOP key to store rechargeable (nickel-cadmium) batteries. The remote is testing a batch of backlighting on/off. Problem: The remote doesn’t perform commands properly. • Always remove old, weak or worn-out batteries promptly press the STOP key, which would store the same code. Code Search methods to program the remote control. 10 codes on your device. the code. You’re done! You’ve • Make sure the remote is in the correct mode by pressing and recycle or dispose of them in accordance with Local Instead, with the unit now off, continue to press the (Refer to the Auto and Manual Code Search methods.) programmed this device key. GUIDE/HOME and MENU and National Regulations. Manual Code Search 2. While holding the device key down, press and hold the the corresponding device key (TV, SAT•CBL•STREAM, POWER key repeatedly until the unit turns back on. access the same features If you release the device key any time during the Direct The Manual Code Search lets you go one-by-one through NO: Press POWER again. The INFO-OPTIONS key. The POWER key turns off. After DVD•VCR). This tells the remote which device to operate. Did your device turn off? all the codes for the device you’re trying to control. When as the keys on your 3. Once the unit turns back on, you have found another Code Entry procedure, the POWER key blinks four times, remote tests the next code for holding down both keys for three seconds, the POWER • Make sure device is ready (for example, the DVD player has Admiral ...... Battery Saver Advent ...... Aiko ...... original remotes. Akai ...... 10812, 11675, 10060, Albatron you fi nd the one that operates your device, you can stop the America...... Action ...... key turns back on. Anam ...... 10156, 107 your device. AOC ...... code that operates the device. Press the STOP key. Apex Digital and the process is exited. The last programmed code a disc loaded). Code Lists Audiovox ...... 10451, 10180, 100 YES: Go to step 6. Find your device’s brand in the ...... 10875, 1 Your universal remote control saves battery power by 3. Aventura...... Axion and Entry method outlined in the User’s Guide. Bell & Howell ...... Brand Codes are used for programming using the Brand Code Search ...... BenQ ...... Bradford search and store that code. Broksonic ...... Lista de Códigos Candle ...... en la guía del usuario. Carnivale...... Los códigos de las marcas son utilizados para programar utilizando Carver under the device key is retained. Celera ...... 3. Release both keys. The POWER key remains on. automatically turning off if any key is pressed for more than los métodos de búsqueda y entrada de códigos de marcas, resaltado Arrow keys act as Brand Code list section of the Changhong ...... Citizen ...... • You may have pressed an invalid key for the mode the remote is TV Clarion 4. Test the key’s functionality again by attempting to Keep pressing POWER every 2 Brand Code List/Lista de Códigos de Marcas Commercial Solutions ...... Concerto ...... Contec ...... NO: Press PLAY again. The remote tests the next batch Panasonic Samsung Sharp Sony Toshiba Vizio Magnavox Craig ...... Philips Crosley ...... JVC 60 seconds. This saves your battery life should your remote Crown ...... RCA Insignia Curtis Mathes ...... accompanying code list. Circle GE ...... navigation keys for PROSCAN Symphonic ...... in. VCR CXC ...... Cytron ...... control a variety of the device’s functions. If the code seconds until your device turns off. 0123456789 4. Starting with the number 1 key, press and release each Daewoo ...... Dell ...... TIPS: Each device key is associated with a type of device— Mitsubishi Panasonic Sharp Sony Toshiba of 10 codes. Denon ...... Magnavox Test the remote with the device to make sure the device Diamond Visio get stuck in a place where the keys remain depressed, such Philips JVC Dumont ...... Durabrand...... RCA Samsung GE Dwin Dynex ..... streaming media players the number for your brand and PROSCAN DVD Electrogr ©2013 Voxx Accessories Corp. Electroh When it does, press STOP. 0123456789 Emerso that has been stored controls the majority of the number key on the keypad in the following order: 1-9, ...... the TV is preset to search for TVs, SAT•CBL•STREAM for • If you’re trying to enter a channel number directly, try as between sofa cushions. Panasonic Pioneer Samsung Sharp Sony Toshiba Empr Magnavox Env Philips key is programmed with the correct code for maximum ESA Fi Apex JVC RCA F GE Panasonic PROSCAN AMNIO Keep pressing PLAY every 5 seconds until your device as well as in menu and keep the list handy. ADB Magnavox Philips 3502 Woodview Trace, Suite 220 0123456789SAT/CABLE Scientific Hughes Atlanta device’s functions, programming is complete. If the then 0. The number that causes the POWER key to pressing the OK key after entering the channel number as Network satellite receivers, cable boxes, digital TV converters, or General Systems Dish Network Instruments TIP: Because there are so many codes, you may have to Systems/tar functionality. If some features don’t work, try a different Echos RCA Motorola DirecTV Actual model may vary from GE PROSCAN turns off. guide systems for other Indianapolis, IN 46268 0123456789 code stored does not give maximum functionality, try code in the list. streaming media players, and DVD•VCR for VCRs or DVD press the POWER key many times—possibly hundreds of blink is the fi rst number of the code. As you fi nd each this is a requirement of certain models and brands. devices. illustration another code. players. times. number of the code, write it down for future reference. Trademark(s) ® Registered RCR314WR US 04