HUMIDITY HUMIDITY HW31K | P

HUMIDITY HUMIDITY HW31K | p. 532 HS20K | p. 513 KH2 | p. 509 SRH12 | p. 525 Kele Carries Nine Brands to Meet Your Sensing Needs. Sensing to Meet Your Kele Carries Nine Brands

GEH2 | p. 515 HW30K | p. 530 HUMIDITY HUMIDITY

Products manufactured MODEL/SERIES PAGE in the United States Humidistats HUMIDITY VH7200 Series — 3% Humidistats...... 557 Products that are new to the catalog TDC Series — 5% Duct Mount Humidistat...... 558 TCY-BH Series — 5% Wall Mount Humidistat...... 560 TCI Series — 3% Wall and Duct Proportional Controller...... 562 EE46 — Condensation Monitor...... 564 HC-101, HC-201 — Room and Duct Humidistats...... 566 W43A-14 — Room Humidistat ...... 566

RH Transmitters A/RH1 Series — Automation Components BAS/HVAC RH Transmitters. . . . .497 HMW90 Series — Wall-Mounted Humicap® Humidity and Temperature Transmitter. 499 E31 Series — Multifunction Humidity/Temperature Transmitter...... 501 HF5 Series — 1% Room and Duct Multi-Parameter Humidity and A/RH2 | p. 519 Temperature Transmitter...... 503 EE23 Series — Room or Duct Humidity, Temperature, Dew Point Transmitter...... 505 HT829, HT839 — 1% and 2% Wall, Duct and OSA Humidity Transmitters. . . . 507 H_20K Series — 2% Wall, Duct and OSA Humidity Transmitters...... 511 HS20K Series — 2% Room Humidity Transmitter ...... 513 GEH2 Series — 2% Wall, Duct and OSA Humidity Transmitters ...... 515 HMD60, HMD70, and HMK41K — 2% Duct and OSA Humidity Transmitters...... 517 A/RH2 Series — 2% Wall, Duct and OSA Humidity Transmitters...... 519 HT2D, HT2O, HT2S — 2% Wall, Duct and OSA Humidity Transmitters. . . . .521 BA/H200 Series — 2% Wall, Duct and OSA Humidity Transmitters...... 523 HS20K | p. 513 SRH12 Series — 2% Wall, Duct and OSA Humidity Transmitters ...... 525 EHRH — 2% Waterproof / Washdown Humidity Transmitter...... 527 KH3 Series — 3% Room, Duct, and OSA Humidity Transmitters...... 528 H_30K Series — 3% Wall, Duct and OSA Humidity Transmitters...... 530 HD31K, HO31K, HW31K — 3% Humidity Transmitter & Optional Temperature Transmitters...... 532 HMW80 Series — 3% Room Humidity and Temperature Transmitter ...... 534 HMD42, HMD53 — 3% Duct Humidity and Temperature Transmitter ...... 536 A/RH3 Series — 3% Room, Duct, and OSA Humidity Transmitters...... 538 BA/H300 Series — 3% Room, Duct, and OSA Humidity Transmitters...... 540 SRH13 Series — 3%Room, Duct, and OSA Humidity Transmitters...... 542 SRH | p. 525 GEH3 Series — 3% Room, Duct and OSA Humidity Transmitters...... 543 KH5 Series — 5% Room, Duct, and OSA Humidity Transmitters...... 545 GEH5 Series — 5% Room, Duct, and OSA Humidity Transmitters ...... 547 A/RH5 Series — 5% Room, Duct, and OSA Humidity Transmitters...... 549 SRH15 Series — 5% Room, Duct, and OSA Humidity Transmitters ...... 551

Specialty Transmitters KH2 Series — 2% Wall, Duct and OSA Humidity Transmitters...... 509 DP4A, EN4A, WB4A — Dew Point, Enthalpy & Wet Bulb Transmitters . . . . .552 HMD/S/W8XD/H/W Series — Dew Point, Enthalpy and Wet Bulb Transmitters...... 554 9002 — Infrared Dew Point & Grains Transmitter...... 555 kele.com A21 — Outdoor Aspirated Humidity / Temperature Housing...... 567 HUMIDITY AUTOMATION COMPONENTS BAS/HVAC RH TRANSMITTERS A/RH1 SERIES

DESCRIPTION Model A/RH1 Relative Humidity Transmitters provide RH readings at ±1% accuracy using a ceramic resistive sensor offering a 20% to 90% operating range . The transmitters come in wall, duct, and OSA mounting styles . They have multiple field-selectable outputs, including 4-20 mA, 0-10V, and 0-5V signals . The supply power is also selectable as 24 VDC or 24 VAC . A/RH1-O A/RH1-R FEATURES • Accuracy of ±1% • Duct and OSA twist-off weatherproof housing • 24 VDC or 24 VAC power (field-selectable) A/RH1-SP • 4-20 mA, 0-10V, or 0-5V signal (field-selectable) • Field-calibratable • Optional temperature sensor A/RH1-D

SPECIFICATIONS Supply Voltage 12-40 VDC or 24 VAC, selectable Dimensions Accuracy ±1% @ 77°F (25°C) over a Room 3 8"H. x 2 .8"W x 0 .9"D selectable 20% span from 50 to 70%, (9 .8 x 7 x 2 3. cm) 60 to 80%, or 70 to 90% RH Duct 3 6". (9 cm) Ø head with 8 .15"L

Thermal Effect <0 .005% per °F (<0 .01 per °C) (20 cm) probe 0 .75” (1 .9 cm) Ø HUMIDITY Signal Output 4-20 mA, 0-5 VDC, 0-10 VDC OSA 3 6". (9 cm) Ø head with 3 .0"L (field selectable) (7 .6 cm) probe 1 .4" (3 .6 cm) Ø Measurement Range 0% to 100% Weight Sensing Technology Capacitive Room 0 .22 lb (0 1. kg) Operating Temperature Duct 1 .2 lb (0 .54 kg) Room 32° to 122°F (0° to 50°C) OSA 0 .6 lb (0 .27 kg) Duct/OSA -40° to 140°F (-40° to 60°C) Wall Pack 0 .22 lb (0 1. kg) Enclosure Approvals CE, RoHS Room Plastic Delta-style Warranty 5 years Duct/OSA Plastic weatherproof

WIRING

Output Selection Switches (SW 1) 2 Wire Current Output Signal Output Selection Switches (SW 1) 2 Wire Current Output Signal 4-20 mA Output DC Supply Voltage 4-20 mA Output ON ON DC Supply Voltage 4-20 mA Output ON ON OFF 4-20 mA Output 4-20mA VIN COM VOUT 0-10 VDC Output 3 Wire Current Output Signal OFF ON ON Supply4-20mA Ground VIN COM/ Signal VOUT Common 0-10 VDC Output OFF AC or DC Supply Voltage 3 Wire Current Output 4-20Signal mA Output ON ON 0-5 VDC Output ONSupplyON Ground / Signal Common AC or DC Supply Voltage 4-20mA VIN COM VOUT OFF OFF 4-20 mA Output Voltage Output Signal 0-5 VDC Output 0-10 or 0-5 VDC Output Signal ON ON Supply Ground / Signal Common AC or DC Supply Voltage 4-20mA VIN COM VOUT OFF Voltage Output Signal 4-20mA VIN COM VOUT 0-10 or 0-5 VDC Output Signal Supply Ground / Signal Common March 2014 AC or DCWE Supply MAKE Voltag ITe EASY. kele.com 888-397-5353 USA 497

4-20mA VIN COM VOUT HUMIDITY AUTOMATION COMPONENTS BAS/HVAC RH TRANSMITTERS A/RH1 SERIES

DIMENSIONS

4.68 (11.9) 3.84 4.24 (10.8) 0.75 2.25 3.60 (9.1) 3.95 (10.0) (1.9) in (5.7) 0.89 (9.8) (cm) (2.3) 2.69 0.79 (6.8) (2.0) 2.25 0.86 (5.7) (2.2) 1.00 (2.5) 6.10 (4) PG11/0.5" (1.27) NPT Knockouts 3.84 4.51 (15.5) (9.8) (11.5) 3.00 (7.6)

0.60 PG11 Watertight Fitting (1.5) 1.40 (3.6) (Cable Dia. 0.12 to 0.28"/ 2.75 0.92 0.3 to 0.7 cm) (7.0) (2.3)

Room Outside

0.65 (1.7) 0.75 (1.9) 80 Micron Sintered 2.75 (7.0) Stainless Steel Filter 1.40 Plastic (3.6) Washer 80 Micron 1.07 Stainless 0.75 9 (2.7) Steel (1.9) Sintered FIlter 4.5 (1.4) 1.00 0.58 (2.5) 7.15 (1.5) (18.2) 2.70 0.18 (6.9) (0.5) O.D. Ref 0.46 (1.2) Plastic Cover for Stainless Steel Filter to 2.25 Stainless Protect Sensor during (5.7) Plate Wash Down

0.75 (1.9) Duct Stainless Plate

HUMIDITY ORDERING INFORMATION

MODEL DESCRIPTION A/RH1 1% accuracy humidity transmitter (5070) 20% Range 50 to 70% (6080) 20% Range 60 to 80% (7090) 20% Range 70 to 90% AN Type III 10,000Ω thermistor CP Type II 10,000Ω thermistor 20K 20,000Ω thermistor 100 100Ω 385 PT RTD IK 1,000Ω 385 PT RTD R Room D Duct O Outside air SP Wall plate

A/RH1 - (5070) - AN - R Example: A/RH1- (5070) - AN-R Room humidity transmitter with 1% accuracy over 50 to 70% range and Type III 10,000Ω thermistor

RELATED PRODUCTS PAGE DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979

498 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY WALL-MOUNTED HUMICAP® HUMIDITY AND TEMPERATURE TRANSMITTER HMW90 SERIES

DESCRIPTION The Wall-Mounted Vaisala HMW90 Series HUMICAP® Humidity and Temperature Transmitters measure the relative humidity and temperature of indoor environments, where high accuracy, stability, and reliable operation are required . The HMW90 Series includes models for both current and voltage output . These flexible transmitters offer a variety of options and features . Transmitters are available with an optional display . The HMW90 Series humidity transmitters are quick and easy to install . The wiring is connected secured to the wall through the back plate and the electronics with the sensors can then be easily snapped on . Dip switches for transmitter configuration can be accessed when the HMW90 enclosure is open . Series FEATURES • Easy installation, configuration and field adjustment APPLICATION • ±1.7% accuracy • Museums and archive facilities • Data centers • Optional relay (HMW93 only) • Production and warehouse • Laboratories • NIST calibration certificate included • facilities • Testing environments • Long term stability with HUMICAP® 180R sensor

SPECIFICATIONS 9 Accuracy ±1 .7% RH @ 50° to 104°F Impedance VDC (10° to 40°C) from 0 to 90% RH HMW93 10 kΩ minimum Stability ±0 .5% RH/year Measurement Range 0 to 100% RH, 23° to 131°F Supply Voltage (-5° to 55°C) HMW92 10 to 28 VDC Sensing Technology HUMICAP® 180R HMW93 18 to 35 VDC, 24 VAC ±20%, Operating Temperature 23° to 131°F (-5° to 55°C) 50/60 Hz Enclosure ABS/PC Signal Output Enclosure Rating IP30, UL-V0 approved HMW92 4-20 mA Wiring Terminations Screw terminals

HMW93 0 to 5 VDC, 0 to 10 VDC Dimensions 5 22"H. X 3 19"W. X 1 .18"D HUMIDITY Maximum Output (13 .27 X 8 .1 X 3 .0 cm) Impedance mA Approvals CE HMW92 500Ω Weight 0 34. lb (0 .16 kg) Minimum Output Warranty 1 year

DIMENSIONS

59.5 29.8 30 Ø 4.4 5 47.5 27 132.7 9 34 33.5

30.5

HMW90 Series Dimensions HMW90 Series Mounting Base Dimensions

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 499 HUMIDITY WALL-MOUNTED HUMICAP® HUMIDITY AND TEMPERATURE TRANSMITTER HMW90 SERIES

WIRING

HMW92 Wiring (2 Power Supplies) HMW92 (Three-wire connection)

-T +T -RH +RH + Power supply 10 ... 28 VDC -T +T -RH +RH mA - RL = 0 ... 600 Ω + Power supply + Power supply mA - 10 ... 28 VDC 10 ... 28 VDC mA - mA RL = 0 ... 600 Ω RL = 0 ... 600 Ω

9 HMW93 Wiring HMW93 (Three-wire connection)

Relay -RH+RH -T +T -Vs +Vs Power supply Relay -RH+RH -T +T -Vs +Vs + 18 ... 35 VDC - or 24 VAC ±20% V + Power supply 18 ... 35 VDC RL = 10 kΩ min. V V or 24 VAC ±20% V - max. 50 VDC RL = 10 kΩ min. 500 mA HUMIDITY

ORDERING INFORMATION

MODEL DESCRIPTION HMW92 Humidity and Temperature transmitters with two current outputs HMW92D Humidity and Temperature transmitters with two current outputs, with visible display HMW93 Humidity and Temperature transmitters with two voltage outputs HMW93D Humidity and Temperature transmitters with two voltage outputs, with visible display

RELATED PRODUCTS PAGE HTM10 HMW90 series replacement sensor element DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

500 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY MULTIFUNCTION HUMIDITY/TEMPERATURE TRANSMITTER E31 SERIES

DESCRIPTION The E+E E31 Series Multifunction Humidity/Temperature Transmitters offer precise measurement of humidity and temperature with field selectable analog outputs for both parameters . The unit can also be ordered with enthalpy, dew point, and wet bulb . Two-point calibration can be performed using push-buttons on the circuit board-no need for dismounting which makes it ideal for regulatory environments . Built-in LEDs indicate transmitter status and errors . An optional display is available for local indication of measured values and minimum and maximum values .

FEATURES • Accuracy of ±1.3% RH • Derived values for dew point, enthalpy, and wet bulb • Simple calibration • Stainless steel sintered filter • Optional display available • Dual output signals • RS232 output WIRING 9

RxD/B- 1

SPECIFICATIONS TxD/A+ 2 Serial data output Accuracy GNDSer 3 4-20 mA + Out2 4 Humidity ±1 .3% RH, <90% RH, 5° to 104°F - (-15° to 40°C) 4-20 mA + Out1 5 Analog output GND 6 Temperature ±0 .27°F (±0 .14°C) ±0 .06 Power Supply GND 7 Supply Voltage 8-35 VDC Supply 12-30VAC V+ 8 0-5/10 VDC: HUMIDITY 8-35 VDC, 40 mA; 12-30 VAC, 1 .0 VA 4- 20 mA: 8-35 VDC, 80 mA; 12-30 VAC, 1 .9 VA DIMENSIONS Signal Output Field selectable: 4-20 mA, 0-20 mA, in (500Ω max load), 0-5 V, or 0-10 V, (cm) 5.3 (13.5) 2.6 Communication Serial interface RS232C (6.7) Measurement Range Humidity 0 to 100% RH Temperature -40° to 120°F (-40° to 48 .9°C) 3.5 (9.0) Sensing Technology Humidity Capacitive Temperature Pt1000Ω RTD, 385 curve Sensor Protection Stainless steel sintered filter Display Type Optional, two line, alphanumeric LCD, English units Plastic enclosure Display Dewpoint -40° to 120°F (-40° to 48 .9°C) 6.4 (16.3) 2.6 Enthalpy 0-64 Btu/lb (0 to 400 kJ/kg) 5.3 (13.5) (6.7) Wetbulb 0° to 100°F (-17 .8° to 37 .8°C) Operating Temperature 3.5 Display: -40° to 140°F (9.0) (-40° to 60°C) No Display -4° to 122°F (-20° to 50°C) Enclosure NEMA 4, IP65 Wiring Terminations Screw terminals Warranty 1 year Metal enclosure

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 501 HUMIDITY MULTIFUNCTION HUMIDITY/TEMPERATURE TRANSMITTER E31 SERIES

ORDERING INFORMATION

MODEL DESCRIPTION E31* Humidity and temperature transmitter, 8 to 35 VDC, 12 to 30 VAC HOUSING M Humidity and temperature transmitter with metal housing P Humidity and temperature transmitter with polycarbonate housing APPLICATION A Wall mount B Duct mount D Wall mount with remote sensing probe and 6.6' (2m) cable PROBE LENGTH (MODEL “B” ONLY) 5 Probe length, 7.9" (200 mm) 6 Probe length, 15.8" (400 mm) DISPLAY - No display D LCD display ALARM OUTPUT 9 - No alarm relay S With alarm relay

Chart 1 Chart 2 Chart 3 Physical Parameters 2) Output Signals 3) Scaling (T - temperature, A) - RH 2) - 0 to 5 VDC Td - dew point, Tf - frost point) B) - temperature 3) - 0 to 10 VDC 05 0° to 100° C) - dew point 12 -40° to 120° E) - wet bulb I) - speciﬁc enthalpy

Example: E31MA5DS EE31 duct humidity and temperature transmitter with polycarbonate housing, wall HUMIDITY mount, probe length, 7.9", LCD display, with alarm relay.

* Each E31 is shipped with setup software and required cable.

RELATED PRODUCTS PAGE DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 HA010502 EE23/EE31 Radiation Shield HA011101 1/2" conduit connector

502 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 1% ROOM AND DUCT MULTI-PARAMETER HUMIDITY AND TEMPERATURE TRANSMITTER HF5 SERIES

DESCRIPTION The Rotronic HF5 Series High Performance Multi Parameter Humidity and Temperature Transmitters are ideal for all applications where exact measurement of humidity, enthalpy, dry bulb, wet bulb, temperatures plus other psychrometric parameters are critical . This high performance transmitter using air chip technology accurately measures relative humidity to within ±0 8%. RH . The HydroClip2 probe can be individually calibrated and adjusted to increase measurement precision where you need it the most . The HF5 Series is available in a duct mount or wall mount configuration . This unit can be factory configured or software HFxxW HF5xxD is available for field configuration .

FEATURES • Interchangeable probe • Calculates all psychrometric values WIRING • Automatic sensor and drift compensation • Optional DIN rail mounting • Field configurable with software 2 T- OUT K2 9 1 V + APPLICATION 2 H-OUT K1 The HF5 is ideal for high accuracy HVAC applications, 1 V + building management systems, museums, libraries, environmental monitoring systems . The HF5 Series measures dew point, wet bulb, enthalpy, specific humidity, absolute humidity and mixing ratio .

Terminals Description HUMIDITY HydroClip2 K2-2: T-OUT Temperature output (+) OUT-2 K2-1: V+ Power supply: 10…28 VDC (+) The new HygroClip2 is available in various formats: from a simple plug-in probe for handheld instruments and data loggers Terminals Description K1-2: H-OUT Relative humidity or dew point (+) OUT-1 to the highly developed cable probes for high temperature and K1-1: V+ Power supply: 10…28 VDC (+) other special applications . As standard, they all have high accuracy, which can be increased further by specific adjustments Note: Connect the + of the power supply to only one of the V+ terminals. within our patented AirChip, making every HygroClip2 a high- The two terminals marked V+ are internally connected. end product for all applications .

SPECIFICATIONS Supply Voltage Range HF52 10 to 28 VDC, 40 mA Humidity 0-100% HF53 15 to 40 VDC, 50 mA; 12 to 28 VAC, Temperature -148° to 392°F (-100° to 200°C) 1 .2 VA Display Optional: LCD, 1 or 2 decimals Accuracy ±0 .8% RH @ 73°F (23°C) from Operating Humidity 0 to 100% non-condensing 5% to 95% RH Operating Temperature -40° to 140°F (-40° to 60°C) Stability 0 .5% drift per year Enclosure Rating ABS/IP65 conforms to UL94-HB Repeatability 0 .3% RH Wiring Terminations Screw terminals/ M16 cable gland or Long Term Stability <1% RH/year ½" conduit adapter Response Time RH: Typically 10 seconds for 63 % of Dimensions a jump 35 to 80 %RH Case 5 1"H. x 5 .1"W x 1 .8"D (1 m/sec air flow at sensor) (13 x 13 x 4 .5 cm) Temperature: Typically 4 seconds for 63 % of a Wall Plate 0 6". Ø x 3 .5"L (1 .5 x 9 cm) change from 23 to 80 °C Duct Probe 0 6". Ø x 8 .3"L (1 .5 x 21 cm) (1 m/sec air flow at sensor) Approvals CE/EMC: EMC Directive 2004/108/ Signal Output 4-20 mA EC Maximum Output Weight 1 lb (0 45. kg) Impedance 500Ω Warranty 1 year Minimum Output Impedance 1000Ω

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 503 HUMIDITY 1% ROOM AND DUCT MULTI-PARAMETER HUMIDITY AND TEMPERATURE TRANSMITTER HF5 SERIES

ORDERING INFORMATION

MODEL DESCRIPTION HF520 2-wire (loop powered), 4-20 mA HF532 3-wire, 4-20 mA HF534 3-wire, 0-5 V HF535 3-wire, 0-10 V INSTALLATION/MOUNTING D Duct mount (through wall) W Wall mount PSYCHROMETRIC PARAMETERS B Humidity (0 to 100 %RH) and Temperature - see range below A Temperature & Dew / Frost point - see range below 9 C Temperature & Wet Bulb temperature (Tw) - see range below D Temperature & Enthalpy (H) - see range below OUTPUT RANGES 6X 0° to 100°F (-18° to 38°C) OPTIONAL KEYPAD AND DISPLAY D Keypad and display (HF52: no backlight – HF53: w. backlight) X No keypad and display ELECTRICAL CONNECTION 3 1x ½" conduit adapter (horizontal mounting)

HUMIDITY 4 1x ½" conduit adapter (vertical mounting - type D w/o display) DEWPOINT, WETBULB OR ENTHALPY RANGES (optional) 4X 0° to 100°F (-18° to 38°C) S Hydroclip standard climate probe

HF520 D B 6X D 4 S

Example: HF520DB6XD4S 2 Wire psychrometric transmitter, duct mount, humidity and temperature outputs, display and HydroClip Standard Climate probe.

RELATED PRODUCTS PAGE 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994

504 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM OR DUCT HUMIDITY, TEMPERATURE, DEW POINT TRANSMITTER EE23 SERIES

DESCRIPTION The E+E EE23 series Humidity and Temperature Transmitter has been developed for high-precision measurement of relative humidity and temperature .

EE23 Series transmitters are available for wall and duct mounting with or without the snap inmounting kit, which allows a quick and easy exchange of the transmitter . Outputs can be selected between voltage and current .

A special protection coating for the sensing element permits the permanent use in very polluted environments .

FEATURES • Humidity and temperature calibration • NEMA 4 housing • Stainless steel sintered filter • Optional alarm switch • Optional display APPLICATION 9 • Green houses WIRING • Storage rooms • Swimming halls Output and Supply • Meteorology with active temperature output with passive temperature output

SPECIFICATIONS Accuracy Analog Humidity ±1 .3%, ≤90% RH, 5° to 104°F outputs Analog HUMIDITY (-15° to 40°C) output Temperature ±0 .27°F (±0 .14°C) Hysteresis < 2% RH Supply Voltage 0-5 VDC: 10 .5 - 35 VDC, 35 mA; Alarm Output 12 - 28 VAC, 0 8. VA 0-10 VDC: 15 - 35 VDC, 35 mA; 15 - 28 VAC, 1 4. VA 4-20 mA: 15 to 35 VDC, 60 mA; 15 to 28 VAC, 2 .6 VA Signal Output 4-20 mA, 0-5 VDC, 0-10 VDC Maximum Output DIMENSIONS Impedance 470Ω Minimum Output in Metal: 5.3 (13.5) Impedance 5000Ω (cm) Measurement Range Humdity: 0-100% Sensing Technology Humidity: Capacitive, HC1000-200 3.5 Temperature: 1000Ω Platinum (9.0) (class A, DIN EN 60751) Sensor Protection sintered stainless steel filter Operating Temperature Non-display -40° to 140°F (-40° to 60°C) Plastic: 3.5 (9.0) With display -22° to 140°F (-30° to 60°C) Display LCD, English units Enclosure Polycarbonate or Aluminum alloy 2.6 Enclosure Rating NEMA 4 (IP65) (6.7) Wiring Terminations Screw terminals maximum size wire AWG 16 (1 .5 mm2) Approvals CE Both metal and plastic casings are 2.6" (6.7 cm) deep Warranty 1 year March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 505 HUMIDITY ROOM OR DUCT HUMIDITY, TEMPERATURE, DEW POINT TRANSMITTER EE23 SERIES

ORDERING INFORMATION

MODEL DESCRIPTION EE23 Humidity and temperature transmitter, 8 to 35 VDC, 12 to 30 VAC HOUSING M Humidity and temperature transmitter with metal housing P Humidity and temperature transmitter with polycarbonate housing APPLICATION A Wall mount B Duct mount PROBE LENGTH (MODEL “B” ONLY) 5 Duct probe length, 7.9" (20.0 cm) 6 Duct probe length, 15.8" (40.0 cm) DISPLAY 9 – No display D LCD display ALARM OUTPUT – No alarm relay S With alarm relay AB RH and temperature OUTPUT 2 0-5 VDC 3 0-10 VDC 6 4-20 mA HUMIDITY RANGE FOR TEMPERATURE 05 0° to 100°F (-17° to 37.8°C) 10 -20° to 120°F (-28.9° to 48.9°C) 12 -40° to 120°F (-40° to 48.9°C) 15 20° to 120°F (-6.7° to 48.9°C)

EE23 P B 6X D S AB 2 12

Example: EE223PB6DSAB212 EE23 duct humidity and temperature transmitter with plastic case, 15.8" (40.0 cm) probe, LCD display, 0-5 VDC outputs for RH and temperature (0-100%; -40° to 120°F (-40° to 120°C)

506 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 1% AND 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS HT829, HT839

DESCRIPTION The Minco Model HT829 Relative Humidity Transmitter measures 0% to 100% RH over a range of -10° to 185°F (-23° to 85°C) . The standard two-wire, 4-20 mA output Room provides low-cost space, duct, and outdoor monitoring Housing or process and industrial building control . A temperature (S) sensor built into the integrated circuit provides temperature compensation over the full temperature range .The HT839 Series has temperature transmitter output .

FEATURES Duct • Temperature-compensated IC sensor Housing • One-point field calibration, RH or temperature (D) • Weatherproof housing for OSA and duct • 1% or 2% RH accuracy • Sintered filter OSA / Wall Housing (O) FM 9

APPROVED

SPECIFICATIONS Accuracy Wiring Terminations Nonpolar terminals, connect either 1% units ±1% from 10% to 80% RH way (22-14 AWG wire) 2% units ±2% from 0% to 90% RH Dimensions

Time Constant 60 sec in slow-moving air Room 4 5"H. x 2 .8"W x 1 .5"D HUMIDITY Supply Voltage 9 .4 VDC min to 35 VDC max (11 x 7 x 4 cm) Signal Output Two-wire, 4-20 mA over 0% to 100% Duct 4 6"L. x 2 .9"W x 2 3"D. RH and temperature (HT839) (22 x 7 3. x 5 .7 cm), 4 6". (11 .8 cm) Maximum Output probe length 0 .38" (0 .95 cm) Ø Impedance 730Ω @ 24 VDC (Power supply - 9 .4) OSA 10 .2"L x 2 .7"W x 2 .3"D / 0 02. A = Ω (26x 7 x 5 .7 cm), 8" (20 cm) probe Sensing Technology Capacitive monolithic IC (Humidity) length 1 .25" (3 .2 cm) Ø Sensor Protection Sintered filter (Humidity) Weight Calibration One-point adjustment Room 0 3. lb (0 .13 kg) Adjustments Zero, noninteracting Duct 1 1. lb (0 .5 kg) Operating Temperature OSA 1 16. lb (0 .53 kg) Room -10° to 150°F (-23° to 66°C) Warranty 3 years Duct/OSA -10° to 185°F (-23° to 85°C),

WIRING — HT829, RH ONLY WIRING — HT839, RH AND TEMPERATURE

24VDC 24VDC + - + -

Z S H T Z S Z S Hum* * Non-polar connections RH + Hum RH Signal – Hum* 4-20mA + Hum ** Need humidity connection 4-20mA to output temperature **Temp Signal – Temp* Signal – + Temp signal properly 4-20mA *Non-polar connections

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 507 HUMIDITY 1% AND 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS HT829, HT839

ORDERING INFORMATION

MODEL DESCRIPTION HT829 Relative humidity transmitter only HT839 Relative humidity transmitter and temperature transmitter D Duct mount, weather resistant box, 8" probe O Outside air mounting, weather resistant box with weather shield S Space room/office mounting 1 4-20 mA DC output N1 1% RH from 10/80% @ 25°C, temperature matched at 0°C with NIST certificate N2 2% accuracy from 0/90% @ 25°C, temperature matched at 0°C with NIST certificate S2 2% accuracy from 0/90% @ 25°C, no calibration data EN Range codes per Minco letter ranges (-20°/140°F) or (-29°/60°C) (HT839 only) S Range codes per Minco letter ranges (0°/100°F) or (-18°/38°C) (HT839 only) A Range codes per Minco letter ranges (20°/120°F) or (-7°/49°C) (HT839 only) BI Range codes per Minco letter ranges (30°/130°F) or (-1°/54°C) (HT839 only) N Range codes per Minco letter ranges (32°/122°F) or (0°/50°C) (HT839 only) H Range codes per Minco letter ranges (40°/90°F) or (4°/32°C) (HT839 only) 9 -- Range codes per Minco letter ranges in the catalog (HT839 only) SX Special range on next item line, -xxx/-yyyE, i.e., -20°/120°F (HT839 only) Example: HT839D1S2A HT839 D 1 S2 A 2% RH and temperature duct transmitter with 8" probe, temperature ranged for 20°/120°F

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 HUMIDITY

508 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS KH2 SERIES

DESCRIPTION The Kele KHR, KHD, and KHO Series Humidity Transmitters are specifically designed for use in HVAC/BAS applications . These instruments measure relative humidity from 0% to 100% . The standard two-wire, 4-20 mA output provides low-cost humidity monitoring for building control . The RH transmitters are available with thermistor or RTD temperature sensors . They come in room (KHR), KHR duct (KHD), and OSA (KHO) mounting styles .

OPERATION The transmitter converts the relative humidity into a 4-20 mA signal with the latest microprocessor capacitive design . Multipoint factoryautomated calibration improves accuracy and repeatability . The optional temperature sensors, thermistor or RTD, offer direct connections to most automation systems . FEATURES • Calibration-free interchangeable sensors KHD • Twelve-point computerized calibration • ±2% accuracy (5% to 95% RH) • Replaceable sensor probe (no re-calibration) • No need to remove box to replace sensor probe • Attractive room enclosure design KHO • Two-wire, 4-20 mA output, 0% to 100% RH 9

SPECIFICATIONS Accuracy 2% RH @ 73°F (23°C) from 5% to KHD Metal handy box 90%; (0-5% & 90%-100%) add 3% KHO NEMA 3R plastic box Drift <±0 .5% per year Probe Thermal Effect 0 .05% / °F Duct Probe: 1/2" aluminum tube with Supply Voltage 9 .5-28 VDC expanded Teflon® filter

Signal Output 4-20 mA two-wire, loop-powered OSA Probe: 1/2" aluminum tube with 40 HUMIDITY Maximum Output micron stainless steel sintered filter Impedance 725Ω @ 24 VDC Wiring Terminations Screw terminals (Supply voltage - 9 .5 VDC) / 0 .02 Weight (Without Options) Sensing Technology Precon HS-2000 capacitive KHR 0 21. lb (0 .09 kg) Operating Humidity 0-100% Non-condensing KHD 1 2. lb (0 .59 kg) Operating Temperature -20° to 158°F (-29° to 70°C) KHO 0 52. lb (0 .24 kg) Enclosure Approvals RoHS KHR White plastic, UL94HB Warranty 18 months

WIRING

24 VDC Power Supply

J5 12-28 +V 4-20mA VDC RH Temperature RH Signal SENSOR LOOP sensor output to BAS Controller

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 509 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS KH2 SERIES

DIMENSIONS Plug-in Replaceable Sensor

3.20 (8.12) Removeable Sensor Cover

2.50 1.30 (3.30) (6.35)

3.31 4.5 (8.40) (11.43) 1/2" Conduit Hole* (face down) Mounting Tabs (2) 4.10 (10.4) 2.50 (6.35)

Mounting Box

PC Board Clips 2.75 0.94 (6.98) (2.38) * Must face down 3.30 to maintain water- (8.38) Back Plate Front Side tight integrity 1/2" Conduit Hole* 9 (face down)

ORDERING INFORMATION

MODEL DESCRIPTION KHD2 Duct mounted 2% humidity transmitter KHO2 Outside air 2% humidity transmitter KHR2 Wall mounted room/space 2% humidity transmitter OPTIONAL TEMPERATURE RANGES T3 10,000Ω thermistor @ 77˚F (26˚C), Type III T21 2252Ω thermistor @ 77˚F (26˚C), Type II T22 3000Ω thermistor @ 77˚F (26˚C), Type II T24 10,000Ω thermistor @ 77˚F (26˚C), Type II T27 100,000Ω thermistor @ 77˚F (26˚C), Type II HUMIDITY T42 20,000Ω thermistor @ 77˚F (26˚C), Type IV T81 100Ω RTD @ 32˚F (0˚C), 385 platinum curve T85 1000Ω RTD @32˚F (0˚C), 385 platinum curve T91 1000Ω RTD @ 32˚F (0˚C), 375 platinum curve OPTIONS CL1 Custom one color logo, KHR2 only WP Weatherproof housing, KHD2 only XJ1 RJ11 externally-accessible communication jack (CCRJ11AD required), KHR2 only XJ2 Internal RJ11 communication jack, KHR2 only XLED LED indicator lamp 24V AC/DC green, KHR2 only XMB Momentary pushbutton switch, jumpered across sensor or pot (JP1), KHR2 only

KHD2 T3 WP Example: KHD2-T3-WP Duct mounted 2% humidity transmitter with 10,000Ω thermistor @ 77˚F (26˚C), Type III and weatherproof housing

ACCESSORIES HSR Replacement 2% humidity sensor for wall HSD Replacement 2% humidity sensor HSO Replacement 2% humidity sensor

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

510 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS H_20K SERIES

DESCRIPTION The Kele Series H_20K Humidity Transmitters have been specifically designed for use in HVAC/BAS applications . These instruments measure relative humidity from 5% to 90% RH with 2% accuracy and produce a two wire 4-20 mA linear output . All are available with an optional passive RTD or thermistor . The duct and OSA versions may also be fitted with a 4-20mA temperature transmitter .

APPLICATION The temperature compensated circuitry converts the relative humidity into a 4-20 mA signal . The optional temperature FEATURES sensors, RTDs or thermistors, offer direct connection to most • 2% accuracy (5% to 90%) automation systems . On duct and OSA units, an optional 4-20 • Two-wire, 4-20 mA RH output mA temperature transmitter may also be employed and is • Optional temperature thermistor rangeable from -30° to 250°F (-34° to 121°C) . • Optional temperature RTD • Optional temperature 4-20mA (duct or OSA)

DIMENSIONS 9

in (cm) 2.13 2.875 (5.4) (7.3) 4.43 (11.3) 5.25 0.25 (13.3) 4.50 (0.64) (11.43) 4.625 2.88 (11.7) 1.25 (7.30) (3.18) 7.0

(17.8) 2.125 HUMIDITY (5.4) Foam gasket 3.23 (8.20) HW20K HD20K HO20K

SPECIFICATIONS Accuracy 2% RH @ 73°F (23°C) from 5% to Sensor Protection 90% RH; (0-5% & 90%-100%) (Duct and OSA) Sintered filter add 3% Operating Humidity 0-100% RH non-condensing Stability 0 .5% drift per year Operating Temperature -20° to 158°F (-29° to 70°C) Thermal Effect 0 .05% per °F Enclosure Supply Voltage 9 .5-28 VDC Room White plastic Signal Output 4-20 mA, thermistor, RTD Duct Weather resistant cast aluminum Maximum Output Wiring Terminations Terminal block (22 to 16 AWG) Impedance 725Ω @ 24VDC Weight (Supply voltage - 9 .5V) / 0 02. Room 0 3. lb (0 .09 kg) Measurement Range Duct 1 14. lb (0 .52 kg) RH 0-100% OSA 1 2. lb (0 .54 kg) Temperature -20° to 140°F (-29° to 60°C) Approvals RoHs (see ordering information) Warranty 1 5. year

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 511 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS H_20K SERIES

WIRING FOR RH ONLY AND "T" TEMPERATURE OPTION WIRING OR RH AND "TT" TEMPERATURE OPTION

Optional temperature sensor Power supply 24 VDC Temperature T 4-20 mA RH Humidity T signal V+ 4-20 mA RH Humidity signal V+ 4-20 mA Power Supply signal 24 VDC

Room, Duct, OSA (RH or RH-T) Duct and OSA with TT option only

MOUNTING ROOM AND DUCT SENSOR MOUNTING OSA SENSOR

DIAGRAM 1: The transmitter should be mounted so that the 9" (22.86 cm) probe is in the center of the The transmitter should be mounted duct. The transmitter should be duct mounted away from fans, corners, heating and cooling coils, and other preferably on the north side (Northern Hemisphere) of a building under the eave, equipment that will affect the measurement of relative humidity . not above windows or doors . The transmitter Optional Customer- Supplied Handy Box should be mounted vertically with the sensor Wire Access slots pointing down . Hole Plate 9 Mounting Screws

White Faceplate (standard) Cover Diagram 1 Mounting 1/16 Allen Screws Diagram 2 North Diagram 2: The sensor should be mounted approximately 5' (12.7 cm) above the floor, on an interior wall, away from any heating or cooling generating devices. Basic model comes with screw terminal block, two #6-32 screws for handybox mounting, and two #6 x 1" screws for direct wall mounting. Cover screws are #6-32 with a 1/16 allen key head. Precautions should be taken to prevent air infiltration from inside the wall. HUMIDITY

ORDERING INFORMATION

MODEL DESCRIPTION HW20K 2% beige room humidity transmitter, 4-20 mA output HW21K 2% white room humidity transmitter, 4-20 mA output HD20K 2% duct-mount humidity transmitter, 4-20 mA output HO20K 2% OSA-mount humidity transmitter, 4-20 mA output OPTIONS (Temperature Sensors or Transmitters) -- No temperature sensor T3 10,000Ω thermistor @ 77°F (25°C), Type III T21 2252Ω thermistor @ 77˚F (26˚C), Type II T22 3000Ω thermistor @ 77˚F (26˚C), Type II T24 10,000Ω thermistor @ 77°F (25°C), Type II T27 100,000Ω thermistor @ 77˚F (26˚C), Type II T42 20,000Ω thermistor @ 77˚F (26˚C), Type IV T63 1000Ω nickel SS flush mounted plate RTD @ 70˚F (26˚C), Type III (yellow leads) T71 100Ω SS flush mounted plate RTD @ 32˚F (0˚C), Type III (blue leads) T81 100Ω RTD @ 32˚F (0˚C), 385 platinum curve T85 1000Ω 385 platinum RTD T91 1000Ω 375 platinum RTD TT-2 -20° to 140°F (-29° to 60°C) transmitter, 4-20 mA (duct and OSA only) TT-3 0° to 100°F (-18° to 38°C) transmitter, 4-20 mA (duct and OSA only)

HD20K T3 Example: HD20K-T3 Duct-mount humidity sensor with 10 kΩ Type III temperature sensor

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

512 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% ROOM HUMIDITY TRANSMITTER HS20K SERIES

DESCRIPTION The Kele Model HS20K-C and HS20K-V Humidity Transmitters has been specifically designed for use with HVAC/BAS applications and, with its unique low- profile design, is perfect for museums, institutions or other architecturally challenging locations . The HS20K will monitor humidity from 5% to 95% with 2% accuracy with an 4-20 mA analog current output or a 0-5 VDC voltage output . The HS20K Series is available with optional passive temperature sensors . FEATURES • 2% accuracy • 4-20mA or 0-5 VDC analog outputs • Passive temperature sensors output optional • Stainless steel plate mounted HS20K

SPECIFICATIONS DIMENSIONS Accuracy 2% RH @ 73°F (23°C) from 5% to in 90%; (0-5% & 90-100%) add 3% 2.75 Thermal Effect 0 .05% per °F (cm) (6.99) 9 Supply Voltage HS20K-C 9 .5-28VDC HS20K-V 5 VDC Signal Output HS20K-C 4-20 mA, two wire loop powered, passive thermistor or RTD 4.50 3.25 HS20K-V 0 to 5 VDC, passive thermistor or (11.43) (8.25) RTD HUMIDITY Maximum Output Impedance 725Ω @ 24VDC (Supply voltage – 9 5V). / 0 .02 Sensing Technology Precon HS-2000 capacitive Operating Humidity 0-100% RH non-condensing Operating Temperature -20° to 158°F (-29° to 70°C) Enclosure Flush mounted stainless steel plate Wiring Terminations Terminal block (22 to 16 AWG) Weight 0 .34 lb (0 15. kg) Approvals RoHS Warranty 18 months WIRING

Power Supply 24 VDC

VOLTAGE WIRING + –

(DCP-524 power supply 4-20 mA recommended) Signal

Temperature (optional)

Pin 1 - not used Pin 2 - Power (5 VDC) Pin 3 - RH Out (5 VDC) HS20K-C 4-20mA Current Output 4 3 2 1 Pin 4 - Ground

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 513 HUMIDITY 2% ROOM HUMIDITY TRANSMITTER HS20K SERIES

ORDERING INFORMATION

MODEL DESCRIPTION HS20K-V Stainless steel wall plate humidity sensor with 0-5 VDC output HS20K-C Stainless steel wall plate humidity sensor with 4-20 mA output OPTIONS T3 10,000Ω thermistor @ 77˚F (26˚C), Type III (gray leads) T21 2252Ω thermistor @ 77˚F (26˚C), Type II (green leads) T22 3000Ω thermistor @ 77˚F (26˚C), Type II (blue leads) T24 10,000Ω thermistor @ 77˚F (26˚C), Type II (yellow leads) T27 100,000Ω thermistor @ 77˚F (26˚C), Type II (gray leads) T42 20,000Ω thermistor @ 77˚F (26˚C), Type IV(green leads) T63 1000Ω nickel RTD @ 70˚F (26˚C) (yellow leads) T71 100Ω RTD @ 32˚F (0˚C) (blue leads) T81 100Ω RTD @ 32˚F (0˚C), 385 curve (yellow leads) T85 1000Ω RTD @32˚F (0˚C), 385 curve (blue leads) T91 1000Ω RTD @ 32˚F (0˚C), 375 curve (green leads)

HS20K-V T3 Example: HS20K-V-T3 2% SS wall plate humidity transmitter with 9 0-5 VDC output with Type III 10,000Ω thermistor

RELATED PRODUCTS PAGE DCP-1.5-W-C Power supply, 24 VAC In to special DC output (Specify output voltage when ordering, 1.5-24 VDC) 995 DCP-524 Power supply, 24 VAC IN to 24 VDC and 5 VDC OUT 997 DCPA-1.2-C Power supply, 120 VAC In to 24 VAC/ Special DC output (Specify output voltage when ordering, 1.3-27 VDC) 994 HUMIDITY

514 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS GEH2 SERIES

DESCRIPTION The Amphenol Advanced Sensors Model GEH2 Series 2% Accuracy Humidity Transmitters are designed specifically for commercial building automation systems (BAS) . The room, duct and OSA transmitters use replaceable sensor tips and switch selectable transmission including 4-20mA, 0-5V or 0-10VDC . The GEH also has an optional temperature transmitter output with selectable outputs(RH&T must be the same type) . All duct and OSA enclosures are rated for IP42 or NEMA 3R applications .

Room FEATURES OSA Duct • ±2% accuracy • Temperature compensated APPLICATIONS • Field-selectable 4-20 mA, 0-10V, or 0-5V outputs • Hospitals/pharmaceuticals • Replaceable sensor • HVAC building controls • Swimming pools • Optional temperature transmitter • Clean rooms • Museums / archives • Animal rooms 9

SPECIFICATIONS WIRING Accuracy 2% (10% to 90%) Supply Voltage 18-30 VDC, 100mA VOLTAGE MODE CURRENT MODE Signal Output 4-20 mA/0-5V/0-10V selectable; 0-100% RH VI VI VI VI HUMIDITY Maximum Output SW1 SW3 SW1 SW3 Impedance 700Ω maximum @ 24 VDC Switch Positions for Voltage Mode Switch Positions for Current Mode Minimum Output Switch Selectable 0-5 V or 0-10 V Output Impedance 10 kΩ minimum 10V 24 VDC I1RH/P+ Sensing Technology Capacitive and replaceable V-TMP + Temp – Input 4-20 mA/RH I2RH/P– Operating Humidity 0% to 99%, non-condensing GND

2 – RH 4-20 mA/Temp I2-TMP Operating Temperature -40° to 140°F (-40° to 60°C) V-RH + Input SW TH Not Enclosure Rating I2RH/P– – used 24 VDC TH Room ABS plastic, UL94V Room Installed 5V I1RH/P+ + IP20, NEMA 1 J7 J8 Duct/OSA IP42, NEMA 3R Stainless steel RH and Temperature - Voltage RH and Temperature - Current Loop with removable tip, PTFE Teflon® shield, Wiring Terminations 16 to 22 AWG terminals VI Weight SW3

Room 0 .34 lb (0 .15 Kg) VI Duct 0 .96 lb (0 .44 Kg) SW1 3K OSA 1 .22 lb (0 .55 Kg) JPR1 Current Warranty 2 years 10K 10V Voltage 2 SW

J7 J8 5V

Connector and Switch Locations

Only one terminal block provided; move for either voltage or current.

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 515 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS GEH2 SERIES

DIMENSIONS

2.75 in (7.0) (cm) 2.75 8.80 (22.37) 1/2'' (7.0) 3.80 Cover Base (1.27) (9.63) 4.70 knockout (11.92) (each side)

4.70 4.70 Wiring 4.70 (11.92) (11.92) Access (11.92) 0.5 (1.27)

1.28 6.38 (3.24) (16.2)

Outside Air Cover (all mounts) Space (Wall) Mount Mount Duct Mount 2.37 (6.03)

9 ORDERING INFORMATION

MODEL DESCRIPTION GEH2 RH transmitter 2% accuracy RH MOUNTING ENCLOSURE S Decorative room mounting enclosure D Duct mounting with ABS plastic IP42 enclosure O OSA mounting with ABS plastic IP42 enclosure and weather shield SN Decorative room mounting enclosure with NIST certificate DN Duct mounting with ABS plastic IP42 enclosure with NIST certificate ON OSA mounting with ABS plastic IP42 enclosure and weather shield with NIST certificate HUMIDITY TEMPERATURE OPTION TT0 Transmitter, 40° to 90°F (4.4° to 32.2°C) (S, D, SN, and DN only) TT2 Transmitter, -20° to 140°F (-29° to 60°C) (D, O, DN, and ON only) TT3 Transmitter, 0° to 100°F (-18° to 38°C) (All enclosure mounts)

Example: GEH2-SN 2% room RH transmitter with NIST certificate GEH2-D 2% duct RH transmitter

RELATED PRODUCTS PAGE GEH2-RH Replaceable 25% humidity sensor for room, duct, and OSA GEH2-RHTT Replaceable 2% humidity and temperature sensor for room, duct and OSA transmitters DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

516 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% DUCT AND OSA HUMIDITY TRANSMITTERS HMD60, HMD70, AND HMK41K

DESCRIPTION Vaisala’s Models HMD60 and HMD70 Duct Mount Relative Humidity Transmitters have been specifically designed for use in HVAC/BAS and pharmaceutical applications . These instruments measure relative humidity from 0% to 100% . They are easily installed and meet the European CE standards .

Five-minute field calibration is possible using theModel HMK41K Humidity Calibrator . When accuracy adjustment or sensor replacement is necessary, the transmitter can be HMD 60 or calibrated in seconds with a single potentiometer without HMD 70 disturbing operation . This saves hours of maintenance time and assures high accuracy .

FEATURES • Comes with NIST certificate • Full 0% to 100% RH measurement • State-of-the-art replaceable sensor technology 9

SPECIFICATIONS HMD60, HMD70 Enclosure Rating Cast aluminum NEMA 4 (IP55), Accuracy ABS plastic Humidity ±2% RH (0% to 90% RH) @68°F Wiring Terminations Screw terminals (20-16 AWG) (20°C) Approvals CE Temperature ±0 .2°C Weight HUMIDITY Supply Voltage Duct 1 68. lb (0 .76 kg) 60 Series 10 to 35 VDC Warranty 1 year 70 Series 10 to 35 VDC, 9 to 24 VAC @ 0 .3 VA (signal dependant) HM41K Maximum Output Sensor Capacitive and replaceable Impedance 500Ω @ 24 VDC Operation Handheld, onsite calibrator Minimum Output Reference Probe Impedance 3000Ω min Accuracy ±1% RH (0% to 90% RH) Measurement Range ±2% RH (90% to 100% RH) Humidity Measuring range 0% to 100% RH, Duct Mount 0% to 100% -40° to 140°F (-22° to 78°C) Temperature Operating temperature -40° to 140°F (-40° to 60°C) Duct Mount -4° to 176°F (-20° to 80°C) Storage temperature -4° to 140°F (-20° to 60°C) Sensing Technology Capacative and replaceable, Vaisala Temperature coefficient HUMICAP® 180 +0 .04% RH/°C typical Operating Temperature Agency approvals CE, NIST certificate Electronics 23° to 131°F (-5° to 55°C) Weight 2 1. lb (0 .95 kg) Sensor Head (Duct) -4° to 176°F (-20° to 80°C), Warranty 1 year

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 517 HUMIDITY 2% DUCT AND OSA HUMIDITY TRANSMITTERS HMD60, HMD70, AND HMK41K

DIMENSIONS

Outside Wall 3.94 (10.01) Northern Exposure in 3.23 (8.20) (Northern Hemisphere) (cm) End View into Sensor 3.23 3.94 (8.20) (10.01) Mounting Bracket 2.50 (6.35) 4.50 (11.43)

0.47 1.75 (1.19) 3.50 (8.89) (4.45) Sun/Rain Shield

2.44 (6.20) 9.85 (25.01) Side View 10.0 (25.40) HMD 60/70 Duct RH WMK-20 Outside Air Bracket

WIRING

T RH Test RH 9 gain RH gain RH offset 1 2 3 4 5 offset 1 2 3 4 5

T T T T gain offset gain offset HMD 60U or HMD 60Y HMD 70U or HMD 70Y Us RH T GND +RH-RH +T -T Output Selections Y Option Power out out Y Option 4-20 mA 0-1V T Supply Voltage Temperature Signal RH Power Temperature Signal 0-5V T Supply RH 4-20 mA Voltage RH Signal T RH Signal Duct Current Output 0-10V RH Duct Voltage Output

ORDERING INFORMATION HUMIDITY

MODEL DESCRIPTION HMD60U Duct RH transmitter, 4-20 mA output HMD60Y Duct RH and temperature transmitter, 4-20 mA output HMD70U Duct RH transmitter 0-1V, 0-5V, 0-10V output HMD70Y Duct RH and temperature transmitter, 0-1V, 0-5V, 0-10V output HMW60U Wall mount, RH transmitter, 4-20 mA output HMW60Y Wall mount, humidity with 4-20 mA output , temperature with 4-20 mA output HMW70U Wall mount, RH transmitter, 0-1 VDC, 0-5 VDC, 0-10 VDC outputs HMW70Y Wall mount, humidity, and temperature, 0-1 VDC, 0-5 VDC, 0-10 VDC outputs

RELATED PRODUCTS PAGE HMK41K 2% handheld calibrator with calibration cable HUMICAP180 Replacement humidity sensor (replaces 0062HM) WMK-20 OSA/Wall-mount bracket DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

518 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS A/RH2 SERIES

DESCRIPTION The ACI A/RH2 Series Relative Humidity Transmitters utilize a capacitive sensing element to deliver a proportional 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC output . It is available for room, duct, outside, and stainless steel wall plate applications . The A/RH2 Series has on board DIP switches which allow the user to select the desired output signal and can be powered by AC or DC power sources . A/RH2-O Each A/RH2 Series humidity transmitter is calibrated using a NIST Traceable Temperature/Humidity Chamber . Three and five A/RH2-R point NIST calibration certificates are available and optional .

FEATURES A/RH2-SP • Popular room housing • Accuracies of 2%, 3% or 5% • Three-year warranty • Duct and OSA twist-off NEMA 4 housing • 24 VDC or 24 VAC power (field-selectable) A/RH2-D • 4-20 mA, 0-10V, or 0-5V signal (field-selectable) • Field calibratable • Digital display option • Optional temperature sensor 9 SPECIFICATIONS Accuracy ±2% @ 77°F (25°C) from 10% to 95% Dimensions Thermal Effect <0 .005% per °F (<0 .01 per °C) Room 3 .8"H x 2 .8"W x 0 .9"D Supply Voltage 12-40 VDC or 24 VAC, selectable (9 .8 x 7 x 2 .3 cm) Signal Output 4-20 mA, 0-5 VDC, 0-10 VDC (field Duct 3 .6" (9 cm) Ø head with 8 15"L. selectable) (20 cm) probe 0 .75" (1 .9 cm) Ø Measurement Range 0% to 100% OSA 3 .6" (9 cm) Ø head with 3 0"L. (7 .6 cm)

Sensing Technology Capacitive probe 1 .4" (3 6. cm) Ø HUMIDITY Operating Temperature Weight Room 32° to 122°F (0° to 50°C) Room 0 .22 lb (0 .1 kg) Duct/OSA -40° to 140°F (-40° to 60°C) Duct 1 .21 lb (0 .54 kg) Enclosure OSA 0 .6 lb (0 .27 kg) Room Plastic Delta-style SP 0 .2 lb (0 .09 kg) Duct/OSA Plastic weatherproof Approvals CE, RoHS Warranty 5 years

WIRING

2 Wire Current Output Signal

Output Selection Switches (SW 1) DC Supply Voltage 4-20 mA Output 4-20 mA Output ON ON 4-20mA VIN COM VOUT 3 Wire Current Output Signal OFF Supply Ground / Signal Common 0-10 VDC Output AC or DC Supply Voltage 4-20 mA Output ON ON

4-20mA VIN COM VOUT OFF Voltage Output Signal 0-5 VDC Output 0-10 or 0-5 VDC Output Signal ON Supply Ground / Signal Common ON AC or DC Supply Voltage OFF 4-20mA VIN COM VOUT

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 519 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS A/RH2 SERIES

DIMENSIONS

0.60 PG11 Watertight Fitting (1.5) 1.40 (3.6) (Cable Dia. 0.12 to 0.28"/ 2.75 0.92 0.3 to 0.7 cm) (7.0) (2.3)

Room Outside

0.75 (1.9) Duct Stainless Plate HUMIDITY ORDERING INFORMATION

MODEL DESCRIPTION A/RH2 2% accuracy humidity transmitter AN Type III 10,000Ω thermistor CP Type II 10,000Ω thermistor 20K 20,000Ω thermistor 100 100Ω 385 PT RTD 1K 1,000Ω 385 PT RTD R Room D Duct O Outside air SP Stainless steel plate passive sensors only A/RH2 --100 R Example: A/RH2-100-R A 2% accuracy room humidity transmitter with 100Ω RTD

RELATED PRODUCTS PAGE DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979

520 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 2% HUMIDITY TRANSMITTERS HT2D, HT2O, HT2S

DESCRIPTION The Minco Model HT relative humidity transmitters are full-range, high-accuracy building automation transmitters . Model HT covers 0% to 100% RH over a wide temperature . The standard two-wire, 4-20 mA output provides low cost space, duct, and outdoor monitoring for building control .

OPERATION HT2D The transmitter converts the relative humidity into a 4-20 mA signal . The HT transmitters have a microprocessor that performs the temperature compensation calculations from an onboard RTD . The microprocessor maintains both high accuracy and low cost with a wide humidity and operational temperature span .

An added optional temperature output is available in the same enclosure . It comes with a 4-20 mA signal and a large selection of temperature ranges . HT2S HT2O The housings for the duct- and OSA-mount configurations are 9 suitable for outdoor use . The aluminum cast box is gasketed to maintain a rain-tight environment for the transmitter . FM C US APPROVED FEATURES • 100% replacement for discontinued Hycal transmitters • Advanced wall-mount design

• Weather-resistant housing for duct and OSA use HUMIDITY • Dual output option (humidity and temperature)

SPECIFICATIONS Accuracy Sensing Technology Humidity ±2% (5 to 90% RH) Humidity Capacitive monolithic IC Temperature ±0 .5°F (0 .27°C) Temperature Platinum 1000Ω RTD 385 curve Supply Voltage 9 .4-35 VDC (24V nominal) Operating Temperature Signal Output 4-20 mA Room -10° to 150°F (-23° to 65°C) Maximum Output Duct/OSA -10° to 185°F (-23° to 85°C) Impedance (Power supply – 9 4V). / 0 .02 = load, Wiring Terminations Nonpolar terminals i .e ., (24V – 9 .4V) / 0 02. = 730Ω (22-14 AWG wire) Measurement Range Weight Humidity 0 to 100% RH Room 0 3. lb (0 .13 kg) Temperature Duct 1 1. lb (0 .50 kg) “EN” Range -20° to 140°F (-29° to 60°C) OSA 1 16. lb (0 .53 kg) “S” Range -0° to 100°F (-18° to 38°C) Warranty 3 years “H” Range 40° to 90°F (4° to 32°C)

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 521 HUMIDITY ROOM, DUCT, AND OSA 2% HUMIDITY TRANSMITTERS HT2D, HT2O, HT2S

DIMENSIONS

2.75 (6.99)

2.75 (6.98) 4.63 4.0 (11.75) (10.16) 4.5 (11.43) 2.25 Housing Bottom View (5.72) 2.88 1.25 (7.30) 4.50 (3.18) (11.43) 0.38 (0.953)

1.58 (4.01) 2.0 Foam Gasket (5.08) 8.0 (20.32) Housing Top View HT2S HT2O HT2D

WIRING 9 24 VDC Power Supply

Hum* Hum

Temp* Temp * Non-polar connection 4-20 mA 4-20 mA ** Needs humidity connection Humidity Optional HT2S to output temperature Signal Temperature signal properly Signal** HUMIDITY ORDERING INFORMATION

ODE DESTON HT2 2% relative humidity transmitter D Duct mount, weather resistant box, 8" probe O Outside air mounting, weather resistant box with weather shield S Space room/office mounting 1 4-20 mA DC output NT No temperature transmitter EN Range codes per Minco letter ranges (-20°/140°F) or (-29°/60°C) S Range codes per Minco letter ranges (0°/100°F) or (-18°/38°C) H Range codes per Minco letter ranges (40°/90°F) or (4°/32°C)

HT2 D 1 NT Example: HT2D1NT 2% RH duct transmitter with 8" probe, no temperature output

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

522 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS BA/H200 SERIES

DESCRIPTION The BAPI BA/H200 Series ±2% Accuracy Humidity Transmitters from BAPI are designed specifically for HVAC systems . Room sensors are available in the traditional Delta style enclosure or the new BAPI STAT 4 . All Duct Units feature medical-grade closed cell foam to seal the probe insertion hole and to absorb vibration . All Outside Air Units have etched Teflon leadwires and are built to withstand high humidity and condensation and perform under real world conditions . Duct and OSA units are available in weatherproof enclosures selectable from IP66 or NEMA 3R . RH transmitter outputs include 4-20 mA, 0-5V, and 0-10V with replaceable Delta-Style BAPIStat 4 Enclosure Enclosure sensor tips . BAPIBox 2 Enclosure FEATURES • Popular room housing • 2% Accuracy • Three-year warranty • Duct and OSA twist-off NEMA 4 housing • 24 VDC or 24 VAC power (field-selectable) • 4-20 mA, 0-10V, or 0-5V signal (field-selectable) 9 • Field calibratable • Optional temperature sensor NEMA 4 Weatherproof (BB) Duct Unit (WP) Duct Unit

SPECIFICATIONS Accuracy 2% from 20% to 95% RH Enclosure Supply Voltage 15-26 VAC/VDC Room BAPI STAT 4: ABS Plastic, UL94V-0

Signal Output 4-20 mA, 0-5 VDC Duct/OSA HUMIDITY Maximum Output BAPIBox (BB) IP66, UV resistant polycarbonate Impedance 700Ω maximum @24 VDC BAPIBox II (BB2) IP66, UV resistant polycarbonate Minimum Output WP Weatherproof, NEMA 3R cast Impedance 10 kΩ minimum aluminum Sensing Technology Resistive with ceramic substrate Wiring Terminations Four wire, 16 to 22 AWG terminals Sensor Protection Weight Room Room Gore-Tex® Room 0 .25 lb (0 11kg). Duct/OSA 100 micron stainless steel sintered OSA/Duct filter BB/BB2 1 0. lb (0 .45 kg) Operating Humidity 0-100%, non-condensing WP 1 3. lb (0 .59 kg) Operating Temperature Approvals CE, RoHS Room 32° to 122°F (0° to 50°C) Warranty 2 years Duct/OSA -22° to 158°F (-30° to 70°C)

WIRING

Humidity Transmitter 4 TO 20 mA TERMINATION Sintered J6 Module Blue wire (3%); GND V+ V OUT TEMP TEMP + Terminal Legend Function Sensor Tip J7 Blue with Black stripe (2%) GND...... 4 to 20 mA signal (to analog input of controller) YELLOW V+...... +15 to +26 VDC YELLOW TEMP...... Optional temperature sensor BLUE BLUE POT 1 POT 2 TEMP...... Optional temperature sensor WHITE or GREEN RH ZERO Display Cycle BLACK J1 – in Seconds RED % RH ADJUST 10 0 TO 5 VDC TERMINATION J2 3 20 Optional Temperature Sensor Wires T H Terminal Legend Function F/ C 12 GND...... To controller ground Voltage Output: 0-5V (white) or ON DEG F (GND or common) 0 to 10V (green) OFF DEG C V+...... +15 to +26 VAC/VDC Ground: 4-20 mA output (two-wire loop) V OUT...... 0 to 5 VDC or 0 to 10V signal to controller or voltage output RTH1 RTH2 (to analog input of controller) Duct and OSA ground TEMP...... Optional temperature sensor Power: 15 to 26 VDC Room Humidity Circuit Board TEMP...... Optional temperature sensor March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 523 HUMIDITY BAPI ROOM DUCT, AND OSA HUMIDITY TRANSMITTERS BA/H200 SERIES

ORDERING INFORMATION

BAPI ROOM HUMIDITY TRANSMITTER MODEL DESCRIPTION BA/H200R 2% Humidity Transmitter, 4-20 mA output, Delta enclosure BA/H210R 2% Humidity Transmitter, 0-10 VDC output, Delta Enclosure BA/H220B4XZCG 2% Humidity Transmitter, 4-20 mA output, BAPI STAT 4 BA/H205B4XZCG 2% Humidity Transmitter, 0-5 VDC output, BAPI STAT 4 BA/H210B4XZCG 2% Humidity Transmitter, 0-10 VDC output, BAPI STAT 4 BA/H212B4XZCG 2% Humidity Transmitter, 2-10 VDC output, BAPI STAT 4 DISPLAY OPTION (optional) D LCD Display F Delta (BAPI STAT 4) Example: BA/H220B4XZCGDF 2% Room humidity transmitter, 4-20 mA output, BAPI STAT 4 with LCD display

BAPI DUCT HUMIDITY SENSOR MODEL DESCRIPTION 9 BA/H200 2% Humidity w/ Interchangeable Output of 0-5 VDC or 4-20 mA output BA/H210 2% Humidity, 0-10 VDC output BA/H212 2% Humidity, 2-10 VDC output ENCLOSURE OPTION (Must choose one) DBB BapiBox Enclosure, IP66 Rated, UV Resistant Polycarbonate DBB2 BapiBox2 Enclosure, IP66 Rated, UV Resistant Polycarbonate DWP Weatherproof Enclosure, NEMA 3R Rated Metal Enclosure Example: BA/H200DBB2 2% Duct mount humidity transmitter, 4-20 mA output, BB2 enclosure

BAPI OSA HUMIDITY SENSOR MODEL DESCRIPTION

HUMIDITY BA/H200 2% Humidity w/ Interchangeable Output of 0-5 VDC or 4-20 mA output BA/H210 2% Humidity, 0-10 VDC output BA/H212 2% Humidity, 2-10 VDC output ENCLOSURE OPTION (Must choose one) OBB BapiBox Enclosure, IP66 Rated, UV Resistant Polycarbonate OBB2 BapiBox2 Enclosure, IP66 Rated, UV Resistant Polycarbonate OWP Weatherproof Enclosure, NEMA 3R Rated Metal Enclosure

Example: BA/H200OWP 2% OSA mount humidity transmitter, 4-20 mA output, weather proof housing

RELATED PRODUCTS PAGE BA/ADP-525-7-CPW Copla white 7" x 5.25" adaptor plate 1391 BA/ADP-525-7-OFW Off white 7" x 5.25" adaptor plate 1391 BA/ADP-525-7-WMW Warm white 7" x 5.25" adaptor plate 1391 BA/FOAMBACK White foam back insulator 1391 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC In to 24 VAC/24 VDC Out 994 UR Moisture-resistant three-wire butt splice

524 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 2% HUMIDITY TRANSMITTERS SRH12 SERIES

DESCRIPTION Designed for the HVAC control system, the Setra SRH12 Series of humidity transmitters offer reliable measurement of RH levels from 0 to 100% with an accuracy of 2% . Available in wall, duct, and outside air configurations, theSRH12 Series is easy to install and service if necessary . The transmitters utilize a field replaceable sensor tip that allows the end user to replace sensors on-site . This eliminates factory calibration and downtime .

FEATURES • ±2% RH accuracy Outside Air • No recalibration required • Replaceable sensor • Capacitive sensor technology • Reverse polarity protection

APPLICATION • HVAC/R building controls 9 • Indoor air quality Duct • Laboratories • Antiquities preservation • Swimming pools • Clean rooms

WIRING HUMIDITY Shield 6 Ground connection 5 (not used) 4 (not used) 3 (not used) RTN/COM 2 RH (4 to 20 mA) output +EXC 1 Vin Wall

SPECIFICATIONS Accuracy 2% RH (0-100% RH) @ 73°F (23°C) Dimensions Drift <1% RH/yr @ 73°F (23°C), 50% RH Room 4 7"H. x 2 .8"W x 1 .0"D Supply Voltage 12-30 VDC (12 x 7 x 2 .5 cm) Signal Output 4-20 mA, 2-wire Duct 5 1"L. x 2 .7"W x 2 4"D. Maximum Output (13 x 6 8. x 7 cm) Impedance 700Ω @ 24 VDC Ω = (supply - 10) / 8 5". (21 .6 cm) probe length 1/2" 0 .02 probe Ø Sensing Technology Replaceable capacitive OSA 6 1"L. x 4"W x 12 .5"D Sensor Protection Porous Polyethylene (15 .5 x 10 x 32 cm) Protection Reverse polarity protection Approvals CE, RoHS Operating Humidity 0 to100% Weight Operating Temperature -40° to 140°F (-40° to 60°C) Room 0 5. lb (0 .23 kg) Enclosure Duct 1 3. lb (0 .59 kg) Room ABS plastic (flammability, 94V-0) OSA 2 6. lb (1 .2 kg) Duct Polycarbonate (flammability, 94V-0), Warranty 1 year (sensor) 3 years NEMA 4 (IP65), (electronics only) Wiring Terminations Pluggable terminal block

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 525 HUMIDITY ROOM, DUCT, AND OSA 2% HUMIDITY TRANSMITTERS SRH12 SERIES

DIMENSIONS 4.04 2.81 5.60 (14.22) 6.10 (15.49) (10.26) (7.15) 5.10 (12.95) 2.68 (6.8)

2.68 2.38 (6.81) (6.04)

4.50 (11.44) 2.38 4.69 (6.04) (11.9) 4.05 (10.27) 12.52 Conduit (31.8) Knockouts 8.56 Both Sides (21.75) Universal Wall/Pipe Security Duct Mounting Lock Probe Flange

0.98 Porous 9 (2.47) Weather Shield

Security Latch Wall Mount Duct Mount Outside Air

ORDERING INFORMATION MODEL DESCRIPTION

HUMIDITY SRH2PO11T0N 2% Outside air humidity transmitter, 4-20 mA output SRH12PD11T0N 2% Duct mount humidity transmitter, 4-20 mA output SRH12PW11T0N 2% Wall mount humidity transmitter, 4-20 mA output

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

ACCESSORIES SRH32PT0 Replacement 2% humidity sensor

526 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 2% WATERPROOF / WASHDOWN HUMIDITY TRANSMITTER EHRH

DESCRIPTION The Amphenol Advance Systems EHRH Series Humidity Transmitters are specifically designed for washdown areas and condensing atmospheres and offer thermistor or 4-20 mA temperature output . The EHRH Series measures relative humidity with a 2% resistive sensor and can withstand 100% saturation . It is made to be surface mounted to a single-gang outlet box or mounted directly to the wall . The EHRH Series are furnished with a waterproof case, connector, and stainless steel cover with leads for termination inside the wall . FEATURES • Wash down waterproof design • 4-20 mA output • Easy one-point field calibration APPLICATION • Hospital suites • Rugged metal cover • Swimming pools • Food processing • Temperature output: thermistor or 4-20 mA • Green houses • Gymnasium

SPECIFICATIONS Accuracy Adjustments Humidity 2% (30% to 95%) Zero ±20% Temperature (EHRHT) ±0 .5°F (±0 .3°C) Span ±10% 9 Supply Voltage 24 VDC ±20% (loop powered) Sensitivity 0 1%. RH Signal Output 4-20 mA Operating Temperature -4° to 129°F (-20° to 54°C) Maximum Output Enclosure Rating Epoxy-hardened waterproof case Impedance 700Ω @ 24 VDC Cover: Stainless steel Measurement Range Wiring Terminations Flying leads Humidity 0% to 100% Weight 0 98. lb (0 .44 kg) Temperature -20° to 140°F (-29° to 60°C) Warranty 1 year Sensing Technology Humidity Bulk polymer resistive HUMIDITY Temperature Platinum 1000Ω 385 RTD (EHRHT) Type III 10 kΩ

DIMENSIONS WIRING

in 2.75 (cm) (6.98) 1.25 1.12 O (2.86) Shown with customer- (3.17) supplied wiring box Power Supply F F G S A E I (red/white) T N 4-20 mA 5.37 Signal (13.64) 3.30 2.75 (green/yellow) (8.25) (6.98) ZS (white/brown) Type 3 Thermistor (white/brown)

Front view Side View Top View EHRH

ORDERING INFORMATION O Power Supply F MODEL DESCRIPTION F G S A EHRH Waterproof/Washdown 2% RH transmitter E I EHRHT Waterproof/Washdown 2% RH temperature 4-20 mA (red/white) T N Signal transmitter RH (green/yellow) ZS (white/orange) RELATED PRODUCTS PAGE 4-20 mA DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 Temp (white/brown) DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 EHRHT March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 527 HUMIDITY ROOM, DUCT, AND OSA 3% HUMIDITY TRANSMITTERS KH3 SERIES

DESCRIPTION The Kele Model KHR, KHD, and KHO Humidity Transmitters are specifically designed for use in HVAC/BAS applications . These instruments measure relative humidity from 0% to 100% . The standard two-wire, 4-20 mA output provides low cost humidity monitoring for building control . The RH transmitter is available with thermistor or RTD temperature sensors or a 4-20 mA rangeable temperature transmitter . They are available in room, duct, and OSA mounting styles .

FEATURES KHR • Packaged for Price and Performance KHO • Calibration free Interchangeable sensors • Twelve point computerized calibration • 0% to 100% RH measurement • ±3% accuracy (5% to 95% RH) • Temperature compensated KHD • No need to remove mounting box to replace sensor • Attractive new room enclosure design • Two-wire, 4-20 mA output 9 • Custom Logo's • Optional push button, LED and comm. jack • Optional temperature sensor (Thermistor or RTD) WIRING - KHR

WIRING - KHD AND KHR 24 VDC Power 24 VDC Supply Power supply J5 12-28 +V 4-20mA J1 VDC RH

V+ Temperature RH Signal 12-28 SENSOR LOOP 4-20 mA sensor output to VDC RH BAS Controller RH signal

TT J4 HUMIDITY Optional THRM temperature sensor to THRM controller

SPECIFICATIONS Accuracy 3% RH @ 73°F from 5% to 90% RH; Probe (0%-5% & 90%-100%) add 4% KHR 1/2" aluminum tube with expanded Drift <±0 .5% per year Teflon® filter Thermal Effect 0 .05% per °F KHD 1/2" aluminum tube with 40 micron Supply Voltage 9 .5-28VDC stainless steel sintered filter Signal Output 4-20 mA two-wire, loop-powered Wiring Terminations Screw terminals Maximum Output Weight Impedance mA 725Ω @ 24 VDC (Supply voltage - KHR 0 2. lb (0 .09 kg) 9 .5 VDC) / 0 02. KHD 1 2. lb (0 .54 kg) Sensing Technology Precon HS-2000 capacitive KHO 0 52. lb (0 .24 kg) Operating Humidity 0-100% non-condensing Approvals RoHS Operating Temperature -20° to 158°F (-29° to 70°C) Warranty 18 months Enclosure KHR White plastic, UL94HB KHD Metal handy box KHO NEMA 3R plastic box

528 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 3% HUMIDITY TRANSMITTERS KH3 SERIES

ORDERING INFORMATION

MODEL DESCRIPTION KHD3 Duct mounted 3% humidity transmitter KHO3 Outside air 3% humidity transmitter KHR3 Wall mounted room/space 3% humidity transmitter Optional temperature ranges T3 10,000Ω thermistor @ 77°F (26°C), Type III T21 2252Ω thermistor @ 77°F (26°C), Type II T22 3000Ω thermistor @ 77°F (26°C), Type II T24 10,000Ω thermistor @ 77°F (26°C), Type II T27 100,000Ω thermistor @ 77°F (26°C), Type II T42 20,000Ω thermistor @ 77°F (26°C), Type IV T81 100Ω RTD @ 32°F (0°C), 385 platinum curve T85 1000Ω RTD @32°F (0°C), 385 platinum curve T91 1000Ω RTD @ 32°F (0°C), 375 platinum curve OPTIONS CL1 Custom one color logo, KHR3 only WP Weatherproof housing, KHD3 only XJ1 RJ11 externally-accessible communication jack (CCRJ11AD required), KHR3 only XJ2 Internal RJ11 communication jack, KHR3 only XLED LED indicator lamp 24 VAC/VDC green, KHR3 only XMB Momentary pushbutton switch, jumpered across sensor or pot (JP1), KHR3 only 9 XN1 NIST certificate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C)

KHD3 T3 WP Example: KHD3-T3-WP Duct mounted 3% humidity transmitter with 10,000Ω thermistor @ 77°F (26°C), Type III and weatherproof housing

RELATED PRODUCTS PAGE HUMIDITY DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 HSD3 Replaceable 3% humidity sensor for KHD3 HSO3 Replaceable 3% humidity sensor for KHO3 HSR3 Replaceable 3% humidity sensor for KHR3

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 529 HUMIDITY 3% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS H_30K SERIES

DESCRIPTION The Kele Series H_30K Humidity Transmitters have been specifically designed for use with HVAC/BAS applications . These instruments measure relative humidity from 5 to 90% with 3% accuracy and produce a two wire, 4-20mA linear output . All can come equipped with an optional passive RTD or thermistor . The duct and OSA versions may also be fitted with a 4-20mA temperature transmitter .

HO30K HD30K HW30K OPERATION The temperature compensated circuitry converts the relative FEATURES humidity into a 4-20 mA signal . The optional temperature • 3% accuracy (5% to 90%) sensors, RTDs or thermistors, offer direct connection to most • Two wire, 4-20mA RH output automation systems . On duct and OSA units, an optional 4-20 • Optional temperature thermistor mA temperature transmitter may also be employed and is • Optional temperature RTD rangeable from -30° to 250°F (-34° to 121°C) . • Optional temperature 4-20mA (Duct or OSA)

9 DIMENSIONS

in 2.13 2.875 (cm) (5.4) (7.3) 4.43 (11.3) 5.25 (13.3) 0.25 (0.64) 4.50 2.88 1.25 (11.43) 4.625 (7.30) (11.7) (3.18)

7.0 2.125 (17.8) (5.4) Foam gasket

3.23 (8.20) HD30K HW30K HO30K HUMIDITY

SPECIFICATIONS Accuracy 3% RH @ 73°F (23°C) from 5% to Sensor Protection Sintered filter (duct and OSA) 90%; (0-5% & 90%-100%) add 4% Operating Humidity 0-100% RH non-condensing Stability typically <0 .5% drift per year Operating Temperature -20° to 158°F (-29° to 70°C) Thermal Effect 0 .05% per °F Enclosure Beige plastic (room), weather Supply Voltage 9 .5-28 VDC resistant cast aluminum (duct and Signal Output RH: 4-20 mA OSA) Temperature: 4-20 mA, optional Wiring Terminations Terminal block (22 to 16 AWG) thermistor, RTD Weight Maximum Output Wall 0 3. lb (0 .09 kg) Impedance 725Ω @ 24VDC (Supply voltage - Duct 1 14. lb (0 .52 kg) 9 .5V) / 0 02). OSA 1 2. lb (0 .54 kg) Measurement Range Approvals RoHs RH 0-100% Warranty 18 months Temperature -20° to 140°F (-29° to 60°C) (see ordering information)

530 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 3% WALL, DUCT AND OSA HUMIDITY TRANSMITTERS H_30K SERIES

WIRING FOR RH ONLY AND "T" TEMPERATURE OPTION WIRING FOR RH AND "TT" TEMPERATURE OPTION

Optional temperature sensor Power supply 24 VDC Temperature T 4-20 mA RH Humidity T signal V+ 4-20 mA RH Humidity signal V+ 4-20 mA Power Supply signal 24 VDC

Room, Duct, OSA (RH or RH-T) Duct and OSA with TT option only

MOUNTING ROOM SENSOR MOUNTING OSA SENSOR

DIAGRAM 1: The transmitter should be mounted so that the 9" (22 .86 cm) probe is in The transmitter should be mounted preferably the center of the duct . The transmitter should be duct mounted away from fans, corners, on the north side (Northern Hemisphere) of a heating and cooling coils, and other equipment that will affect the measurement of building under the eave, not above windows relative humidity . Optional Customer- or doors . The transmitter should be mounted Supplied Handy Box Wire Access vertically with the sensor slots pointing down . Hole Plate Mounting Screws 9

White Faceplate (standard) Cover DIAGRAM 1 Mounting 1/16 Allen Screws DIAGRAM 2

DIAGRAM 2: The sensor should be mounted approximately 5' (12 .7 cm) above the floor, North HUMIDITY on an interior wall, away from any heating or cooling generating devices . Basic model comes with screw terminal block, two #6-32 screws for handybox mounting, and two #6 x 1" screws for direct wall mounting . Cover screws are #6-32 with a 1/16 allen key head . Precautions should be taken to prevent air infiltration from inside the wall .

ORDERING INFORMATION

MODEL DESCRIPTION HW30K 3% beige room humidity transmitter, 4-20 mA output HD30K 3% duct-mount humidity transmitter, 4-20 mA output HO30K 3% OSA-mount humidity transmitter, 4-20 mA output OPTIONS (Temperature Sensors or Transmitters) -- No temperature sensor T3 10,000Ω thermistor @ 77°F (25°C), Type III T21 2252Ω thermistor @ 77˚F (26˚C), Type II T22 3000Ω thermistor @ 77˚F (26˚C), Type II T24 10,000Ω thermistor @ 77°F (25°C), Type II T27 100,000Ω thermistor @ 77˚F (26˚C), Type II T42 20,000Ω thermistor @ 77˚F (26˚C), Type IV T63 1000Ω nickel SS flush mounted plate RTD @ 70˚F (26˚C), Type III (yellow leads) T81 100Ω RTD @ 32˚F (0˚C), 385 platinum curve T85 1000Ω 385 platinum RTD T91 1000Ω 375 platinum RTD TT-2 -20° to 140°F (-29° to 60°C) transmitter, 4-20 mA (duct and OSA only) TT-3 0° to 100°F (-18° to 38°C) transmitter, 4-20 mA (duct and OSA only) XN1 NIST 1 point, 30% (Humidity only) XN2 NIST 2 point, 30% and 50% (Humidity only) XN3 NIST 3 point, 30%, 50% and 70% (Humidity only)

HD30K T3 Example: HD30K-T3 Duct-mount humidity sensor with 10 kΩ Type III temperature sensor

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 531 HUMIDITY 3% HUMIDITY TRANSMITTER & OPTIONAL TEMPERATURE TRANSMITTERS HD31K, HO31K, HW31K

DESCRIPTION The Kele Models HW31K, HD31K, and HO31K 3% Humidity Transmitters are specifically designed for use in HVAC/BAS applications . These instruments measure relative humidity from 0% to 100% . The standard twowire, 4-20 mA output provides low-cost humidity monitoring for building control . The RH transmitters are available with thermistor or RTD temperature sensors or a 4-20 mA rangeable temperature transmitter . They are available in room, duct, and OSA mounting styles .

OPERATION HD31K The transmitter converts the relative humidity into a 4-20 mA signal with 3% accuracy . The optional temperature sensors, thermistor or RTD, offer direct connections to most HW31K automation systems . The optional rangeable temperature transmitter offers a 4-20 mA signal and is rangeable from -30° to 250°F (-34° to 121°C) . 9 HO31K

FEATURES • 0% to 100% RH measurement OPTIONS: • 3% accuracy (5% to 90% RH) • Temperature thermistor • Two-wire, 4-20 mA output • Temperature RTD • White plastic design • Temperature 4-20 mA for duct and OSA

HUMIDITY SPECIFICATIONS Accuracy 3% RH @ 73°F (23°C) from 5% to Operating Humidity 0-100% RH non-condensing 90%; (0-5% & 90%-100%) add 4% Operating Temperature -20° to 158°F (-29° to 70°C) Thermal Effect 0 .05% per °F Enclosure Rating White plastic Stability typically <±1% drift per year Wiring Terminations Screw terminals for loop termination Supply Voltage 9 .5-28 VDC Weight Signal Output RH: 4-20 mA Temperature: 4-20 mA Room 0 3. lb (0 .09 Kg) optional thermistor, RTD Duct 0 58. lb (0 .26 Kg) Maximum Output OSA 0 72. lb (0 .33 Kg) Impedance 725Ω @ 24VDC Approvals RoHs (Supply voltage - 9 .5V) / 0 02). Warranty 18 months Measurement Range RH 0-100% Temperature -20° to 140°F (29° to 60°C) (see ordering information) Sensor Protection Sintered filter (duct and OSA)

532 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 3% HUMIDITY TRANSMITTER & OPTIONAL TEMPERATURE TRANSMITTERS HD31K, HO31K, HW31K

DIMENSIONS

3.25 (8.26)

2.5 (6.35) in 8.38 (21.29) (cm) 0.75 (1.91)

2.3 4.50 (5.84) 0.88 (2.24) (11.43) 4.75 (12.07) 1/2" 5.5 1/8" NPT Conduit Hole (13.98) Mounting Tabs 4.87 Gasket 2.75 1.20 (12.38) (7.0) (3.05) Correct position for mounting outdoor air sensor

Front View Side View 0.25 (0.64)

HW31K HD31K HO31K

MOUNTING WIRING FOR ROOM UNIT MOUNTING OSA SENSOR

The transmitter should be mounted preferably Optional on the north side (Northern Hemisphere) of a Temperature building under the eave, not above windows Cover Hooks Sensor or doors . The transmitter should be mounted 9 vertically with the sensor slots pointing down . 0.75 (1.90) Wire-way T hole RH Humidity V+ 4-20 mA Cover Securing Screws Signal and Back Plate Power Supply 24 VDC Board North Hooks Room, HW31K HUMIDITY (RH or RH-T)

ORDERING INFORMATION

MODEL DESCRIPTION HW31K 3% room-mount humidity transmitter, 4-20 mA output HD31K 3% duct-mount humidity transmitter, 4-20 mA output HO31K 3% OSA-mount humidity transmitter, 4-20 mA output OPTIONS (temperature sensor or transmitter) -- No temperature sensor T3 10,000Ω thermistor @ 77°F (25°C), Type III T21 2252Ω thermistor @ 77˚F (26˚C), Type II T22 3000Ω thermistor @ 77˚F (26˚C), Type II T24 10,000Ω thermistor @ 77°F (25°C), Type II T27 100,000Ω thermistor @ 77˚F (26˚C), Type II T42 20,000Ω thermistor @ 77˚F (26˚C), Type IV T63 1000Ω nickel RTD @ 70˚F (26˚C),T ype III T81 100Ω RTD @ 32˚F (0˚C), 385 platinum curve T85 1000Ω @ 32˚F (0˚C), 385 platinum RTD T91 1000Ω @ 32˚F (0˚C), 375 platinum RTD

HD31K T3 Example: HD31K-T3 Duct-mount humidity transmitter with 10 kΩ Type III temperature sensor

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 533 HUMIDITY 3% ROOM HUMIDITY AND TEMPERATURE TRANSMITTER HMW80 SERIES

DESCRIPTION The Vaisala HMW80 Series Room Humidity and Temperature Transmitter features the interchangeable INTERCAP® sensor and is designed for use in energy management systems in buildings . They combine excellent stability with reliable operation . The HMW80 Series is easy to install, requires no recalibration if the sensor is changed and is insensitive to dust as well as to most chemicals . . This means great savings in overall maintenance costs .

The HMW80 Series transmitters are available in four models: HMW82 and HMW83 transmitters measure both humidity and temperature . The TMW82 and TMW83 measure temperature only . HMW80 Series is available in both 2- and 3-wire and 4-20 mA and voltage analog signals .

FEATURES • 3% accuracy • Easy to replace interchangeable humidity sensor • Two-year warranty 9 • No recalibration required • Low maintenance costs • Temperature and humidity outputs • 2-wire or 3-wire models

WIRING

Power Supply Power Supply -10 to 28 VDC + _ You must connect the RH channel of the + Power supply HUMIDITY _ HMW82, even if you only want to measure 4-20 mA _ 15 to 35 VDC + temperature. Connecting the temperature Power Supply -10 to 28 VDC __ + _ channel is optional. ++ _ 0 to 10 VDC 0 to 10 VDC 4-20 mA +

SPECIFICATIONS Accuracy Measurement Range HMW Series Humidity ±3%, 0 to 70% RH, 50° to Humidity 0 to 100% RH 86°F (10° to 30°C) Temperature 23° to 131°F (-5° to 55°C) TMW Series Temperature ±0 9°F. (± 0 50°C). Sensing Technology Thermal Effect Temperature compensated with less Humidity Replaceable Vaisala Intercap® than 0 005%. per °F (0 .01% per °C) Temperature Digital Temperature Sensor Supply Voltage Operating Humidity 0 to 100% RH non-condensing HMW82/TMW82 20 to 28 VDC Operating Temperature 23° to 131°F (-5° to 55°C) HMW83/TMW83 18 to 35 VDC/24 VAC ±20% Enclosure ABS/ Polycarbonate UL-V0 Signal Output approved, IP30 HMW82/TMW82 4-20 mA (loop powered) Wiring Terminations Terminal block (22 to 16 AWG) HMW83/TMW83 0 to 10 VDC Approvals CE (EN61326-1) Maximum Output Weight 0 25. lb (0 .11 kg) Impedance 600Ω Warranty 2 years Minimum Output Impedance 10 kΩ 534 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 3% ROOM HUMIDITY AND TEMPERATURE TRANSMITTER HMW80 SERIES

DIMENSIONS in 3.2 (8.1) 3.0 (7.7)

(cm) 0.35 (0.9) 0.20 (0.5)

Ø0.17 Ø0.17 (0.44) (0.44)

1.28 5.0 (12.7) 4.9 (12.4) (3.24) 0.79 (0.20)

2.32 (5.9) 9

0.21 (0.55) 3.07 (7.8) 2.37 (6.03)

0.95

(2.4) HUMIDITY

ORDERING INFORMATION

MODEL DESCRIPTION HMW82 3% Room humidity and temperature transmitter, 4-20 mA HMW83 3% Room humidity and temperature transmitter, 0-10 VDC TMW82 Room temperature transmitter, 2-wire 4-20 mA output TMW83 Room temperature transmitter, 3-wire 0-10V output

RELATED PRODUCTS PAGE DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 535 HUMIDITY 3% DUCT HUMIDITY AND TEMPERATURE TRANSMITTER HMD42, HMD53

DESCRIPTION The Vaisala HMD42 and HMD53 Duct Mounted Humidity Transmiitters are designed for building automation applications . They combine reliable operation with excellent stability, providing low cost of ownership to the user . The HMD42 and HMD53 transmitters measure humidity with a ±3% RH accuracy and temperature with a ±0 .54°F (±0 .3°C) accuracy . They feature various selectable analog output signals and they can be powered by either AC or DC voltage .

The HMD42 and HMD53 humidity transmitters use FEATURES the interchangeable Vaisala INTERCAP® Sensor . The • Duct mount transmitters require no recalibration if the sensor is changed . • ±3% RH accuracy The duct mount HMD42 and HMD53 transmitters can be • No recalibration required installed in various measurement environments due to the • Easy to replace interchangeable sensor robust IP65 (NEMA4) rated metal enclosure which protects • Current or selectable voltage output the sensor from dust and splashes of water . PRODUCT DIAGRAM ELECTRONICS SPECIFICATIONS 9 Accuracy Lid Humidity ±3% RH Temperature ±0 .72°F (0 4°C). Stability RH: ±2% RH/2 years Screw terminal Supply Voltage Screws HMD42 10-35 VDC HMD53 10 to 35 VDC, 9 to 24 VAC @ 0 .3 VA (signal dependent) @ 0 3. VA (signal dependent) Signal Output HMD42 4-20 mA HMD53 0 to 1, 0 to 5, 0 to 10 VDC Maximum Output 18941HM Impedance mA 500Ω HUMIDITY Minimum Output Impedance VDC 20 kΩ Glands Measurement Range 10528HM Humidity 0 to 100% Temperature -40° to 140°F (-40° to 60°C) Sensing Technology INTERCAP® sensor Humidity Replaceable Vaisala INTERCAP® part no. 15778HM Temperature Pt 1000Ω RTD Membrane filter Stainless stell Operating Humidity 0 to 100% RH part no. DRW010525 sintered filter Operating Temperature 23° to 131°F (-5° to 55°C) part no. HM46670SP Electronics, Accessories, Spare Parts Enclosure Cast aluminum Enclosure Rating NEMA 4 (IP65) Removing and Reinstalling the Sensor Head Probe Stainless steel 1. Open the lid. Wiring Terminations Screw terminal 2. Disconnect the screw terminal. Approvals CE (EN61326-1, EN55022) 3. Open the screws (2 pcs.) 4. Pull the sensor head out carefully. Weight 0 .6 lb (0 .3 kg) 5. To reinstall, push in the sensor head. Warranty 1 year 6. Reassemble in reverse order.

Replacement of the Intercap Sensor

If the INTERCAP® sensor is damaged, remove it and insert a new one. Recalibration is not needed. If the filter is dirty, replace it to ensure a maximum lifetime and fast response for the sensor. Do not attempt to clean the filter.

536 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 3% DUCT HUMIDITY AND TEMPERATURE TRANSMITTER HMD42, HMD53

DIMENSIONS

2.36 (60) 9.84 (250) 2.36 (60) 9.84 (250)

0.47 0.47 (12) (12) OUTPUT SELECTIONS

3.99 (100) 3.99 (100) INSTALLATION OF THE CURRENT MODULE Take off the jumpers

Connect the module; note the right direction!

3.23 (82) Connect the power supply 3.94 (100 ) 3.23 (82) 3.94 (100)

9 3.23 (82) 3.23 (82) HMD42 Dimensions HMD53 Dimensions

WIRING

HMD 42 HMD 53 HUMIDITY +RH 5 Power GND 5 – DC/AC –RH 4 Supply T 10 - 35 VDC out 4 Power Supply 3 + – 3 + (–) +T 2 VDCout Temp HMD 42 4-20 mA RH RH 2 + + out VDCout RH + –T 1 + HMD 42 4-20 mA Temp Vs 1

ORDERING INFORMATION

MODEL DESCRIPTION HMD42 Duct mount, humidity 4-20 mA output HMD53 Duct mount, humidity and temperature, 0-1 V, 0-5V, and 0-10 V output

RELATED PRODUCTS PAGE 15778HM Replaceable humidity sensor DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 537 HUMIDITY ROOM, DUCT, AND OSA 3% HUMIDITY TRANSMITTERS A/RH3 SERIES

DESCRIPTION The ACI A/RH3 Series Relative Humidity Transmitters utilize a capacitive sensing element to deliver a proportional 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC output . it is available for room, duct, outside, and stainless steel wall plate applications . The A/RH3 Series has on board DIP switches which allow the user to select the desired output signal and can be powered by AC or DC power sources . A/RH3-O Each A/RH3 Series humidity transmitter is calibrated using A/RH3-R a NIST Traceable Temperature/Humidity Chamber . Three and five point NIST calibration certificates are available and optional . A/RH3-SP FEATURES • ±3% accuracy • Three-year warranty • Duct and OSA twist-off weatherproof housing A/RH3-D • 24 VDC or 24 VAC power (field-selectable) • 4-20 mA, 0-10V, or 0-5V signal (field-selectable) 9 • Field-calibratable

SPECIFICATIONS Accuracy ±3% @ 77°F (25°C) from 10% to Dimensions 95% Room 3 8"H. x 2 .8"W x 0 .9"D Thermal Effect <0 .005% per °F (<0 .01 per °C) (9 .8 x 7 x 2 3. cm) Supply Voltage 12-40 VDC or 24 VAC, selectable Duct 3 6". (9 cm) Ø head with 8 .15"L Signal Output 4-20 mA, 0-5 VDC, 0-10 VDC (field (20 cm) probe 0 .75" (1 9. cm) Ø selectable) OSA 3 6". (9 cm) Ø head with 3 .0"L Measurement Range 0% to 100% (7 .6 cm) probe 1 .4" (3 .6 cm) Ø Sensing Technology Capacitive Weight Operating Temperature Room 0 22. lb (0 .1 kg) Room 32° to 122°F (0° to 50°C) Duct 1 21. lb (0 .54 kg) HUMIDITY Duct/OSA -40° to 140°F (-40° to 60°C) OSA 0 6. lb (0 .27 kg) Enclosure SP 0 2. lb (0 .09 kg) Room Plastic Delta-style Approvals CE, RoHS Duct/OSA Plastic weatherproof Warranty 5 years

WIRING

Output Selection Switches (SW 1) 2 Wire Current Output Signal Output Selection Switches (SW 1) 2 Wire Current Output Signal 4-20 mA Output DC Supply Voltage 4-20 mA Output ON ON DC Supply Voltage 4-20 mA Output ON ON OFF 4-20 mA Output 4-20mA VIN COM VOUT 0-10 VDC Output 3 Wire Current Output Signal OFF ON ON Supply4-20mA Ground VIN COM/ Signal VOUT Common 0-10 VDC Output OFF AC or DC Supply Voltage 3 Wire Current Output 4-20Signal mA Output ON ON 0-5 VDC Output ONSupplyON Ground / Signal Common AC or DC Supply Voltage 4-20mA VIN COM VOUT OFF OFF 4-20 mA Output Voltage Output Signal 0-5 VDC Output 0-10 or 0-5 VDC Output Signal ON ON Supply Ground / Signal Common AC or DC Supply Voltage 4-20mA VIN COM VOUT OFF Voltage Output Signal 4-20mA VIN COM VOUT 0-10 or 0-5 VDC Output Signal Supply Ground / Signal Common AC or DC Supply Voltage 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 538 4-20mA VIN COM VOUT HUMIDITY ROOM, DUCT, AND OSA 3% HUMIDITY TRANSMITTERS A/RH3 SERIES

DIMENSIONS

0.60 PG11 Watertight Fitting (1.5) 1.40 (3.6) (Cable Dia. 0.12 to 0.28"/ 2.75 0.92 0.3 to 0.7 cm) (7.0) (2.3)

Room Outside

0.65 (1.7) 0.75 (1.9) 80 Micron Sintered 2.75 (7.0) Stainless Steel Filter 1.40 Plastic (3.6) Washer 80 Micron 1.07 Stainless 0.75 (2.7) Steel (1.9) 9 Sintered FIlter 4.5 (1.4) 1.00 0.58 (2.5) 7.15 (1.5) (18.2) 2.70 0.18 (6.9) (0.5) O.D. Ref 0.46 (1.2) Plastic Cover for Stainless Steel Filter to Stainless Protect Sensor during

2.25 HUMIDITY (5.7) Plate Wash Down

0.75 (1.9) Duct Stainless Plate

ORDERING INFORMATION

MODEL DESCRIPTION A/RH3 3% accuracy humidity transmitter AN Type III 10,000Ω thermistor CP Type II 10,000Ω thermistor 20K 20,000Ω thermistor 100 100Ω 385 PT RTD 1K 1,000Ω 385 PT RTD R Room D Duct O Outside air SP Stainless steel plate passive sensors only A/RH3 --100 R Example: A/RH3-100-R A 3% accuracy room humidity transmitter with 100Ω RTD

RELATED PRODUCTS PAGE DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 539 HUMIDITY 3% ROOM, DUCT, AND OSA HUMIDITY TRANSMITTERS BA/H300 SERIES

DESCRIPTION The BAPI Model BA/H Series 3% Accuracy Humidity Transmitters are designed specifically for HVAC systems . The room transmitters use Delta or BAPI-Stat II enclosures with optional communication jacks . All duct and OSA units come in weatherproof enclosures selectable for NEMA 3R or IP66 applications . All BA/H transmitters have optional temperature sensors or temperature transmitters . Transmitter outputs include 4-20mA, 0-5V ad 0-10V with replaceable sensors .

FEATURES Delta-Style BAPIBox 2 • Popular room housing Enclosure Enclosure • Accuracies of 3% • Three-year warranty • Duct and OSA twist-off NEMA 4 housing • 24 VDC or 24 VAC power (field-selectable) • 4-20 mA, 0-10V, or 0-5V signal (field-selectable) • Field calibratable 9 • Optional temperature sensor

NEMA 4 (BB) Weatherproof (WP) Duct Unit Duct Unit HUMIDITY

SPECIFICATIONS Accuracy 3%, from 20% to 95% RH Enclosure Supply Voltage 15-26 VAC/VDC Room ABS Plastic, UL94V-0 Signal Output 4-20 mA, 0-5 VDC Duct/OSA Maximum Output BAPIBox (BB) IP66 rated UV resistant Impedance 700Ω maximum @24 VDC polycarbonate Minimum Output BAPIBox II (BB2) IP66 rated, UV resistant Impedance 10 kΩ minimum polycarbonate Sensing Technology Resistive with ceramic substrate WP Weather Proof, NEMA 3R, Cast Sensor Protection aluminum Room Room Gore-Tex® Wiring Terminations Four wire, 16 to 22 AWG terminals Duct/OSA 100 micron stainless steel sintered Weight filter Room 0 25. lb (0 .11 Kg) Operating Humidity 0-100%, non-condensing Duct/OSA Operating Temperature BB/BB2 1 0. lb (0 .45 Kg) Room 32° to 122°F (0° to 50°C) WP 1 3. lb (0 .55 Kg) Duct/OSA -22° to 158°F (-30° to 70°C) Approvals CE, RoHS Warranty 2 years

540 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 3% HUMIDITY TRANSMITTERS BA/H300 SERIES

WIRING

ORDERING INFORMATION

BAPI ROOM HUMIDITY TRANSMITTER 9 MODEL DESCRIPTION BA/H300R 3% Humidity Transmitter, 4-20 mA output, Delta enclosure BA/H310R 3% Humidity Transmitter, 0-10 VDC output, Delta Enclosure DISPLAY OPTION D LCD Display Example: BA/H300RD 3% Room humidity transmitter, 4-20 mA output, with LCD display

BAPI DUCT HUMIDITY SENSOR MODEL DESCRIPTION BA/H300 3% Humidity w/ Interchangeable Output of 0-5 VDC or 4-20 mA output HUMIDITY BA/H310 3% Humidity, 0-10 VDC output BA/H312 3% Humidity, 2-10 VDC output ENCLOSURE OPTION DBB BapiBox Enclosure, IP66 Rated, UV Resistant Polycarbonate DBB2 BapiBox2 Enclosure, IP66 Rated, UV Resistant Polycarbonate DWP Weatherproof Enclosure, NEMA 3R Rated Metal Enclosure Example: BA/H300DBB2 3% Duct mount humidity transmitter, 0-10 VDC output, BB2 enclosure

BAPI OSA HUMIDITY SENSOR MODEL DESCRIPTION BA/H300 3% Humidity w/ Interchangeable Output of 0-5 VDC or 4-20 mA output BA/H310 3% Humidity, 0-10 VDC output BA/H312 3% Humidity, 2-10 VDC output ENCLOSURE OPTION OBB BapiBox Enclosure, IP66 Rated, UV Resistant Polycarbonate OBB2 BapiBox2 Enclosure, IP66 Rated, UV Resistant Polycarbonate OWP Weatherproof Enclosure, NEMA 3R Rated Metal Enclosure

Example: BA/H300OWP 3% OSA mount humidity transmitter, 4-20 mA output, weather proof housing

RELATED PRODUCTS PAGE BA/ADP-525-7-CPW Copla white 7" x 5.25" adaptor plate BA/FOAMBACK White foam back insulator BA/FOAMBACK-GRAY Gray foam back insulator UR Moisture-resistant three-wire butt splice DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 BA/ADP-525-7-OFW Off white 7" x 5.25" adaptor plate BA/ADP-525-7-WMW Warm white 7" x 5.25" adaptor plate

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 541 HUMIDITY ROOM, DUCT, AND OSA 3% HUMIDITY TRANSMITTERS SRH13 SERIES

DESCRIPTION Designed for the HVAC control system, the Setra SRH13 Series of humidity transmitters offer reliable measurement of RH levels from 0 to 100% RH with an accuracy of ±3% . Available in wall, duct, and outside air configurations, the SRH13 Series transmitters are easy to install and service if necessary . The transmitters have a field replaceable sensor tip that allows the end user to replace sensors in the field eliminating factory calibration and downtime . FEATURES • ±3% RH accuracy • No recalibration required • Replaceable sensor SRH113PW • Capacitive sensor technology SRH13PD • Reverse polarity protection

WIRING

Shield 6 Ground connection 5 (not used) 4 (not used) 9 3 (not used) RTN/COM 2 RH (4 to 20 mA) output +EXC 1 Vin SRH13P0

SPECIFICATIONS Accuracy 3% RH (0-100% RH) @ 73°F (23°C) Dimensions Stability <1%RH/yr @ 73°F (23°C), 50% RH Room 4 .7"H x 2 .8"W x 1 .0"D Supply Voltage 12-30 VDC (12 x 7 x 2 .5 cm) Signal Output 4-20 mA, 2-wire Duct 5 .1"L x 2 .7"W x 2 .4"D Maximum Output (13 x 6 8. x 7 cm) 8 .5" (21 .6 cm) Impedance 700Ω @ 24 VDC, Ω = (supply - 10) / probe length 1/2" probe Ø 0 .02 OSA 6 1"L. x 4"W x 12 .5"D

HUMIDITY Sensing Technology Replaceable capacitive (15 .5 x 10 x 32 cm) Sensor Protection Porous polyethylene Approvals CE, RoHS Protection Reverse polarity protection Weight Operating Humidity 0 to100% Room 0 5. lb (0 .23 kg) Operating Temperature -40° to 140°F (-40° to 60°C) Duct 1 3. lb (0 .59 kg) Enclosure OSA 2 6. lb (1 .2 kg) Room ABS plastic (flammability 94V-0) Warranty 1 year (sensor) 3 years Duct/OSA Polycarbonate (flammability, 94V-0), (electronics only) NEMA 4 (IP65) Wiring Terminations Pluggable terminal block

ORDERING INFORMATION MODEL DESCRIPTION SRH13PO11T0N 3% Outside air humidity transmitter, 4-20 mA output SRH13PD11T0N 3% Duct mount humidity transmitter, 4-20 mA output SRH13PW11T0N 3% Wall mount humidity transmitter, 4-20 mA output

ACCESSORIES SR33PT0 Replacement 3% humidity sensor

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

542 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT AND OSA 3% HUMIDITY TRANSMITTERS GEH3 SERIES

DESCRIPTION The Amphenol Advance Systems Model GEH3 Series 3% Accuracy Humidity Transmitters are designed specifically for commercial building automation systems (BAS) . The room, duct, and OSA transmitters have replaceable sensor tips and switch-selectable outputs of 4-20 mA, 0-5 VDC or 0-10 VDC . The GEH3 Series also has an optional temperature transmitter, which has the same selectable outputs as humidity . All duct and OSA units come in weather-resistant enclosures rated for IP42 or NEMA 3R applications .

FEATURES • ±3% accuracy • Temperature compensated • Field-selectable 4-20 mA, 0-10V, or 0-5V outputs • Replaceable sensor Room • Optional temperature transmitter Duct OSA 9

SPECIFICATIONS WIRING

Accuracy 3% (10% to 90%) VOLTAGE MODE CURRENT MODE Supply Voltage 12-30 VDC, 2 .4 VA Signal Output 4-20 mA/0-5V/0-10V selectable; VI VI VI VI SW1 SW3 SW1 SW3 0-100% RH HUMIDITY Switch Positions for Voltage Mode Switch Positions for Current Mode Maximum Output Impedance mA 700Ω maximum @ 24 VDC Switch Selectable 0-5 V or 0-10 V Output Minimum Output Impedance VDC 10V 24 VDC I1RH/P+ V-TMP + Temp 10 kΩ minimum – Input 4-20 mA/RH I2RH/P– GND

2 – Sensing Technology Capacitive and replaceable RH 4-20 mA/Temp I2-TMP V-RH + Input SW Operating Humidity 0% to 99%, non-condensing TH Not I2RH/P– – used Operating Temperature -40° to 140°F (-40° to 60°C) 24 VDC TH 1RH/P+ + Enclosure Rating 5V I J7 J8 Room ABS plastic, UL94V Room Installed RH and Temperature - Voltage RH and Temperature - Current Loop IP20, NEMA 1 Duct/OSA IP42, NEMA 3R Stainless steel with removable tip, PTFE Teflon® Shield Wiring Terminations 16 to 22 AWG terminals VI SW3 Weight VI Room 0 .5 lb . (0 .23 kg) SW1

Duct/OSA 1 .3 lb . (0 .59 Kg) 3K JPR1 Warranty 2 years Current 10K 10V Voltage 2 SW

J7 J8 5V

Connector and Switch Locations

Only one terminal block provided; move for either voltage or current.

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 543 HUMIDITY ROOM, DUCT AND OSA 3% HUMIDITY TRANSMITTERS GEH3 SERIES

WIRING

2.75 in (7.0) (cm) 2.75 8.80 (22.37) 1/2'' (7.0) 3.80 Cover Base (1.27) (9.63) 4.70 knockout (11.92) (each side)

4.70 4.70 Wiring 4.70 (11.92) (11.92) Access (11.92) 0.5 (1.27)

1.28 6.38 (3.24) (16.2)

Outside Air Cover (all mounts) Space (Wall) Mount Mount Duct Mount 2.37 (6.03)

9 ORDERING INFORMATION

MODEL DESCRIPTION GEH3 RH transmitter 3% accuracy RH MOUNTING ENCLOSURE S Decorative room mounting enclosure D Duct mounting with ABS plastic IP42 enclosure O OSA mounting with ABS plastic IP42 enclosure and weather shield SN Decorative room mounting enclosure with NIST certificate DN Duct mounting with ABS plastic IP42 enclosure with NIST certificate

HUMIDITY ON OSA mounting with ABS plastic IP42 enclosure and weather shield with NIST certificate TEMPERATURE OPTION TT0 Transmitter, 40° to 90°F (4.4° to 32.2°C) (S, D, SN, and DN only) TT2 Transmitter, -20° to 140°F (-29° to 60°C) (D, O, DN, and ON only) TT3 Transmitter, 0° to 100°F (-18° to 38°C) (All enclosure mounts)

Example: GEH3-SN 3% room RH transmitter with NIST certificate GEH3-D 3% duct RH transmitter

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC In to 24 VAC/24 VDC Out 994 GEH3-RH Replaceable 3% humidity sensor for room, duct, and OSA GEH3-RHTT Replaceable 3% humidity and temperature sensor for room, duct and OSA transmitters DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

544 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 5% HUMIDITY TRANSMITTERS KH5 SERIES

FEATURES • Calibration-free interchangeable sensors • Twelve-point computerized calibration

SPECIFICATIONS 9 Accuracy 5% RH @ 73°F (23°C) from 5% to Enclosure Rating 90% RH; (0%-5% & 90%-100%) KHR White plastic, UL94HB add 5% KHD Metal handy box Drift <±0 .5% drift per year KHO NEMA 3R plastic box Thermal Effect 0 .05%/°F Probe Supply Voltage 9 .5- 28 VDC KHD 1/2" aluminum tube with expanded Signal Output 4-20 mA = 0% to 100% RH, two-wire, Teflon® filter loop-powered Passive temperature KHO 1/2" aluminum tube with 40 micron HUMIDITY output: All Kele standard thermistors stainless steel sintered filter and RTDs Wiring Terminations Screw terminals Maximum Output Impedance Weight (without options) (Supply voltage - 9 .5 VDC) / 0 .02, KHR 0 2. lb (0 .09 kg) 725Ω @ 24 VDC KHD 1 2. lb (0 .54 kg) Sensing Technology Precon HS-2000 capacitive KHR 0 5. lb (0 .23 kg) Operating Temperature -20° to 158°F (-29° to 70°C) Approvals RoHS Warranty 18 months

WIRING

24 VDC Power supply J1 V+ 12-28 4-20 mA VDC RH RH signal TT

Optional THRM temperature sensor to THRM controller

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 545 HUMIDITY ROOM, DUCT, AND OSA 5% HUMIDITY TRANSMITTERS KH5 SERIES

INSTALLATION

24 VDC Power Supply

J5 12-28 +V 4-20mA VDC RH Temperature RH Signal SENSOR LOOP sensor output to BAS Controller

ORDERING INFORMATION

MODEL DESCRIPTION KHD5 Duct mounted 5% humidity transmitter KHO5 Outside air 5% humidity transmitter KHR5 Wall mounted room/space 5% humidity transmitter Optional temperature ranges T3 10,000Ω thermistor @ 77˚F (26˚C), Type III T21 2252Ω thermistor @ 77˚F (26˚C), Type II HUMIDITY T22 3000Ω thermistor @ 77˚F (26˚C), Type II T24 10,000Ω thermistor @ 77˚F (26˚C), Type II T27 100,000Ω thermistor @ 77˚F (26˚C), Type II T42 20,000Ω thermistor @ 77˚F (26˚C), Type IV T81 100Ω RTD @ 32˚F (0˚C), 385 platinum curve T85 1000Ω RTD @32˚F (0˚C), 385 platinum curve T91 1000Ω RTD @ 32˚F (0˚C), 375 platinum curve OPTIONS CL1 Custom one color logo, KHR5 only XJ1 RJ11 externally-accessible communication jack (CCRJ11AD required), KHR5 only XJ2 Internal RJ11 communication jack, KHR5 only XLED LED indicator lamp 24V AC/DC green, KHR5 only XMB Momentary pushbutton switch, jumpered across sensor or pot (JP1), KHR5 only WP Weatherproof housing, KHD5 only

KHD5 T3 WP Example: KHD5-T3-WP Duct mounted 5% humidity transmitter with 10,000Ω thermistor @ 77˚F (26˚C), Type III and weatherproof housing

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

546 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 5% HUMIDITY TRANSMITTERS GEH5 SERIES

DESCRIPTION The Amphenol Advanced Sensors Model GEH5 Series 5% Accuracy Humidity Transmitters are designed specifically for commercial building automation systems (BAS) . The room, duct, and OSA transmitters have replaceable sensor tips and switch-selectable outputs of 4-20 mA, 0-5 VDC or 0-10 VDC . The GEH5 Series also has an optional temperature transmitter, which has the same selectable outputs as humidity . All duct and OSA units come in weather-resistant enclosures rated for IP42 or NEMA 3R applications .

FEATURES • ±5% accuracy • Temperature compensated • Field-selectable 4-20 mA, 0-10V, or 0-5V outputs • Replaceable sensor Room • Optional temperature transmitter Duct OSA 9 SPECIFICATIONS WIRING

Accuracy 5% (10% to 90%) VOLTAGE MODE CURRENT MODE Supply Voltage 18-30 VDC, 100 mA Signal Output 4-20 mA/0-5V/0-10V selectable; VI VI VI VI SW1 SW3 SW1 SW3 0-100% RH Switch Positions for Voltage Mode Switch Positions for Current Mode Maximum Output Impedance 700Ω maximum @ 24 VDC Switch Selectable 0-5 V or 0-10 V Output HUMIDITY Minimum Output 10V 24 VDC I1RH/P+ V-TMP + Temp Impedance 10 kΩ minimum – Input 4-20 mA/RH I2RH/P– GND

2 – Sensing Technology Capacitive and replaceable RH 4-20 mA/Temp I2-TMP V-RH + Input Operating Humidity 0% to 99%, non-condensing SW TH Not I2RH/P– – used Operating Temperature -40° to 140°F (-40° to 60°C) 24 VDC TH 1RH/P+ + Enclosure Rating 5V I J7 J8 Room ABS plastic, UL94V Room Installed RH and Temperature - Voltage RH and Temperature - Current Loop IP20, NEMA 1 Duct/OSA IP42, NEMA 3R Stainless steel with removable tip, PTFE Teflon® shield VI SW3 Wiring Terminations 16 to 22 AWG terminals VI Weight SW1

Room 0 .34 lb (0 .15 Kg) 3K JPR1 Duct 0 .96 lb (0 .44 Kg) Current 10K OSA 1 .22 lb (0 .55 Kg) 10V Voltage

Warranty 2 years 2 SW

J7 J8 5V

Connector and Switch Locations

Only one terminal block provided; move for either voltage or current.

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 547 HUMIDITY ROOM, DUCT, AND OSA 5% HUMIDITY TRANSMITTERS GEH5 SERIES

WIRING

2.75 in (7.0) (cm) 2.75 8.80 (22.37) 1/2'' (7.0) 3.80 Cover Base (1.27) (9.63) 4.70 knockout (11.92) (each side)

4.70 4.70 Wiring 4.70 (11.92) (11.92) Access (11.92) 0.5 (1.27)

1.28 6.38 (3.24) (16.2)

Outside Air Cover (all mounts) Space (Wall) Mount Mount Duct Mount 2.37 (6.03)

ORDERING INFORMATION

9 MODEL DESCRIPTION GEH5 RH transmitter 5% accuracy RH MOUNTING ENCLOSURE S Decorative room mounting enclosure D Duct mounting with ABS plastic IP42 enclosure O OSA mounting with ABS plastic IP42 enclosure and weather shield SN Decorative room mounting enclosure with NIST certificate DN Duct mounting with ABS plastic IP42 enclosure with NIST certificate ON OSA mounting with ABS plastic IP42 enclosure and weather shield with NIST certificate TEMPERATURE OPTION TT0 Transmitter, 40° to 90°F (4.4° to 32.2°C) (S, D, SN, and DN only) HUMIDITY TT2 Transmitter, -20° to 140°F (-29° to 60°C) (D, O, DN, and ON only) TT3 Transmitter, 0° to 100°F (-18° to 38°C) (All enclosure mounts)

Example: GEH5-SN 5% room RH transmitter with NIST certificate GEH5-D 5% duct RH transmitter

RELATED PRODUCTS PAGE GEH5-RH Replaceable 5% humidity sensor for room, duct, and OSA transmitters GEH5-RHTT Replaceable 5% humidity and temperature sensor for room, duct and OSA transmitters DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

548 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 5% HUMIDITY TRANSMITTERS A/RH5 SERIES

DESCRIPTION The ACI A/RH5 Series Relative Humidity Transmitters utilize a capacitive sensing element to deliver a proportional 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC output . It is available for room, duct, outside, and stainless steel wall plate applications . The A/RH5 Series has on board DIP switches which allow the user to select the desired output signal and can be powered by AC or DC power sources . A/RH5-O A/RH5-R FEATURES • Popular room housing • Five-year warranty A/RH5-SP • Duct and OSA twist-off NEMA 4 housing • 24 VDC or 24 VAC power • Field selectable current or voltage outputs • Single point field calibration • Digital display option A/RH5-D • Optional temperature sensor

9 SPECIFICATIONS Accuracy ±5% @ 77°F (25°C) from Duct 3 .6" (9 cm) Ø head with 8 .15"L 10% to 95% (20 cm) probe 0 .75" (1 .9 cm) Ø Thermal Effect <0 .005% per °F (<0 .01 per °C) OSA 3 6". (9 cm) Ø head with 3 .0"L Supply Voltage 12-40 VDC or 24 VAC, selectable (7 .6 cm) probe 1 .4" (3 .6 cm) Ø Signal Output 4-20 mA, 0-5 VDC, 0-10 VDC Enclosure (field selectable) Room Plastic Delta-style Measurement Range 0% to 100% Duct/OSA Plastic weatherproof

Sensing Technology Capacitive Weight HUMIDITY Operating Temperature Room 0 .22 lb (0 1. kg) Room 32° to 122°F (0° to 50°C) Duct 1 2. lb (0 .54 kg) Duct/OSA -40° to 140°F (-40° to 60°C) OSA 0 .6 lb (0 .27 kg) Dimensions SP 0 2. lb (0 .09 kg) Room 3 .8"H x 2 .8"W x 0 9"D. Approvals CE, RoHS (9 .8 x 7 x 2 .3 cm) Warranty 5 years

WIRING

2 Wire Current Output Signal Output Selection Switches (SW 1) DC Supply Voltage 4-20 mA Output 4-20 mA Output ON ON 4-20mA VIN COM VOUT OFF 3 Wire Current Output Signal Supply Ground / Signal Common 0-10 VDC Output AC or DC Supply Voltage 4-20 mA Output ON ON

OFF 4-20mA VIN COM VOUT Voltage Output Signal 0-5 VDC Output 0-10 or 0-5 VDC Output Signal ON ON Supply Ground / Signal Common AC or DC Supply Voltage OFF 4-20mA VIN COM VOUT

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 549 HUMIDITY ROOM, DUCT, AND OSA 5% HUMIDITY TRANSMITTERS A/RH5 SERIES

DIMENSIONS

0.60 PG11 Watertight Fitting (1.5) 1.40 (3.6) (Cable Dia. 0.12 to 0.28"/ 2.75 0.92 0.3 to 0.7 cm) (7.0) (2.3)

Room Outside

0.75 (1.9) Duct Stainless Plate HUMIDITY ORDERING INFORMATION

MODEL DESCRIPTION A/RH5 5% accuracy humidity transmitter AN Type III 10,000Ω thermistor CP Type II 10,000Ω thermistor 20K 20,000Ω thermistor 100 100Ω 385 PT RTD 1K 1,000Ω 385 PT RTD R Room D Duct O Outside air SP Stainless steel plate passive sensors only A/RH5 --100 R Example: A/RH5-100-R A 5% accuracy room humidity transmitter with 100Ω RTD

RELATED PRODUCTS PAGE DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979

550 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY ROOM, DUCT, AND OSA 5% HUMIDITY TRANSMITTERS SRH15 SERIES

DESCRIPTION Designed for the HVAC control system, the Setra SRH15 Series Humidity Transmitters offer reliable measurement of RH levels from 0 to 100% with an accuracy of ±5% . Available in wall, duct, and outside air configurations, theSRH Series transmitters are easy to install and service if necessary . The transmitters utilize a field replaceable sensor tip that allows the end user to replace sensors on-site—eliminating factory calibration and downtime .

FEATURES • ±5% RH accuracy • No recalibration required • Replaceable sensor SRH13PD SRH113PW • Capacitive sensor technology • Reverse polarity protection

WIRING

Shield 6 Ground connection 5 (not used) 9 4 (not used) 3 (not used) RTN/COM 2 RH (4 to 20 mA) output +EXC 1 Vin SRH13P0

SPECIFICATIONS Accuracy 5% RH (0-100% RH) @ 73°F (23°C) Wiring Terminations Pluggable terminal block Drift <1% RH/yr @ 73°F (23°C), 50% RH Dimensions HUMIDITY Supply Voltage 12-30 VDC Room 4 7"H. x 2 .8"W x 1 .0"D Signal Output 4-20 mA, 2-wire (12 x 7 x 2 .5 cm) Maximum Output Duct 5 1"L. x 2 .7"W x 2 4"D. Impedance 700Ω @ 24 VDC Ω = (supply - 10) / (13 x 6 8. x 7 cm) 8 .5" (21 .6 cm) 0 .02 probe length 1/2" probe Ø Sensing Technology Replaceable capacitive polymer OSA 6 1"L. x 4"W x 12 .5"D Sensor Protection Porous polyethylene (15 .5 x 10 x 32 cm) Protection Reverse polarity protection Approvals CE, RoHS Operating Humidity 0 to100% Weight Operating Temperature -40° to 140°F (-40° to 60°C) Room 0 5. lb (0 .23 kg) Enclosure Duct 1 3. lb (0 .59 kg) Room ABS plastic (flammability, 94V-0) OSA 2 6. lb (1 .2 kg) Duct/OSA Polycarbonate (flammability, 94V-0), Warranty 1 year (sensor) 3 years NEMA 4 (IP65) (electronics only)

ORDERING INFORMATION MODEL DESCRIPTION SRH5PO11T0N 5% Outside air humidity transmitter, 4-20 mA output SRH5PD11T0N 5% Duct mount humidity transmitter, 4-20 mA output SRH5PW11T0N 5% Wall mount humidity transmitter, 4-20 mA output

ACCESSORIES SR35PT0 Replaceable 5% humidity sensor

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 551 HUMIDITY

DEW POINT, ENTHALPY & WET BULB TRANSMITTERS DP4A, EN4A, WB4A

DESCRIPTION The Amphenol Advanced Sensors Model DP4 Dew Point, WB4 Wet Bulb, and EN4 Enthalpy Transmitters are rugged, compact, and ideally suited for monitoring dew point, wet bulb, or enthalpy in building automation and process applications . Using a capacitive RH sensor and an RTD temperature sensor, the unit’s microprocessor computes the dew point, wet bulb, or enthalpy . Two linear outputs provide a 4-20mA signal for dew point, wet bulb, or enthalpy, and a 4-20 mA signal for dry bulb . temperature . Room Duct OSA

FEATURES APPLICATIONS • Dew point accuracy of ±1.8°F (±1°C) over the specified • DP4 supply air setpoint (condensation prevention) range • EN4 economizer efficiency • Enthalpy accuracy of ±2 BTU/lb over specified range • WB4 evaporative cooling decision potential 9 • Wet bulb accuracy of ±3°F over the specified range • Dry bulb accuracy of ±.05°F (±0.9°C)over the specified range • Two 4-20 mA output signals • Microprocessor-based signal processing • Weather resistant duct/OSA mounting • Temperature compensated

HUMIDITY SPECIFICATIONS Supply Voltage 18-30 VDC, 100 mA Wet Bulb Accuracy Duct/OSA 0° to 100°F (-17 .8° to 37 .8°C) Enthalpy ±2 BTU/lb Space 40° to 90°F (4 .4° to 32 .2°C) Dew Point ±1 .8°F (±1°C) Dry Bulb Wet Bulb ±3°F (±1 .7°C) Duct/OSA -20° to 120°F (-28 8°. to 49°C) Dry Bulb ±0 .5°F (±0 .9°C) Space 40° to 90°F (4 .4° to 32 .2°C) Signal Output Field selectable: 4-20 mA (700Ω max Sensing Technology Capacitive and replaceable load), 0-5 V, or 0-10 V Humidity and Operating Humidity 0 to 99% RH, non-condensing dry bulb temperature Operating Temperature -40° to 140°F (-40° to 60°C) Measurement Range Weight Dew Point Room 0 34. lb (0 .15 Kg) Duct/OSA -20° to 120°F (-28 .8° to 49°C) Duct 0 96. lb (0 .44 Kg) Space 40° to 90°F (4 4°. to 32 .2°C) OSA 1 22. lb (0 .55 Kg) Enthalpy Warranty 1 year Space/Duct/OSA 0-50 BTU/lb

552 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY DEW POINT, ENTHALPY & WET BULB TRANSMITTERS DP4A, EN4A, WB4A

DIMENSIONS

2.75 in (7.0) (cm) 2.75 8.80 (22.37) 1/2'' (7.0) 3.80 Cover Base (1.27) (9.63) 4.70 knockout (11.92) (each side)

4.70 4.70 Wiring 4.70 (11.92) (11.92) Access (11.92) 0.5 (1.27)

1.28 6.38 (3.24) (16.2)

Outside Air Cover (all mounts) Space (Wall) Mount Mount Duct Mount 2.37 (6.03)

WIRING

VOLTAGE MODE CURRENT MODE

VI VI VI VI VI 9 SW1 SW3 SW3 SW1 SW3 Switch Positions for Voltage Mode Switch Positions for Current Mode VI SW1

Switch Selectable 0-5 V or 0-10 V Output 3K JPR1 Current Vin 1XR/P+ 10V I V-TMP + Temp 10K – 10V XR RTN I2XR/P– GND Voltage HUMIDITY 2 – TEMP RTN 2-TMP XR 2 I V-XR + SW SW TH Not I2DP/P– – J7 J8 used 24 VDC 5V TH 5V I1DP/P+ + J7 J8 Connector and Switch Locations XR and Temperature - Voltage XR and Temperature - Current Loop

Only one terminal block provided; move for *XR represents; DP - Dewpoint; either voltage or current. EN-Enthalpy; WB - Wet bulb

ORDERING INFORMATION MODEL DESCRIPTION EN4A-D Duct enthalpy and dry bulb transmitter EN4A-O OSA enthalpy and dry bulb transmitter DP4A-D Duct dew point and dry bulb transmitter EN4A-S Room enthalpy and dry bulb transmitter DP4A-O OSA/Wall dew point and dry bulb transmitter DP4A-S Room dew point and dry bulb transmitter WB4A-D Duct wet bulb and dry bulb transmitter WB4A-O OSA wet bulb and dry bulb transmitter WB4A-S Room wet bulb and dry bulb transmitter

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 553 HUMIDITY DEW POINT, ENTHALPY & WET BULB TRANSMITTERS HMD/S/W8XD/H/W SERIES

DESCRIPTION The Vaisala Model HMX8XD Dew Point, HMX8XW Wet Bulb, and HMX8XH Enthalpy Transmitters are rugged, compact, and ideally suited for monitoring dew point, wet bulb, or enthalpy in building automation and process applications . Using a Vaisala Intercap® RH sensor and an RTD temperature sensor, the unit's microprocessor computes the dew point, wet bulb, or enthalpy . Two linear outputs provide a 4-20mA signal for dew point, wet bulb, or enthalpy, HMD82 and a 4-20 mA signal for dry bulb . temperature . HWM88

FEATURES • Dew point, Wet Bulb and Dry Bulb accuracy of ±1.8°F (±1°C) over the specified range HMS82 • Enthalpy accuracy of ±2 BTU/lb over specified range • Two 4-20 mA output signals • Microprocessor-based signal processing APPLICATION • Weather resistant duct/OSA mounting • Dew point for supply air setpoint (condensation • Temperature compensated prevention) • Enthalpy for economizer efficiency 9 • Wet bulb for evaporative cooling decision potential

SPECIFICATIONS Supply Voltage 10 - 28 VDC Operating Temperature -40° to 140°F (-40° to 60°C) Accuracy Dimensions Dew Point, Wet Bulb & Dry Bulb Duct 5 2". H x 2 .8" W x 11 .5" D ±1 .8°F (1 .0°C) (13 .1 x 7 .2 x 29 1. cm) Enthalpy ±2 BTU/lb OSA 8 1". H x 4 .8" W x 3 .9" D Relative Humidity ±3% RH (20 .7 x 12 2. x 10 cm) Signal Output (2, Dry Bulb Temperature & Model Room 7 6". H x 2 .8" W x 1 .6" D Specific) 4-20 mA @ 600Ω (19 .3 x 7 .2 x 4 .1 cm) Measurement Range Approvals CE Dew Point, Wet Bulb & Dry Bulb Weight -40° to 140°F (-40° to 60°C) Duct 0 65. lb (0 .29 Kg)

HUMIDITY Enthalpy -10 tp 190 BTU/lb (-40 to 460 kj/hg) OSA 1 6. lb (0 .72 Kg) Relative Humidity 0 to 199% Room 0 25. lb (0 .11 Kg) Sensing Technology Viasal Intercap® Warranty 1 year Operating Humidity 0 to 99 % non-condensing

ORDERING INFORMATION

MODEL DESCRIPTION HMD82TD Duct dew point and dry bulb transmitter HMS82TD Outside Air dew point and dry bulb transmitter HMW88TD Room dew point and dry bulb transmitter HMD82H Duct ehtanlpy and dry bulb transmitter HMS82H Outside Air enthalpy and dry bulb transmitter HMW88H Room enthalpy and dry bulb transmitter HMD82W Duct wet bulb and dry bulb transmitter HMS82W Outside Air wet bulb and dry bulb transmitter HMW88W Room wet bulb and dry bulb transmitter HMD82 Duct dry bulb and dry bulb transmitter HMS82 Outside Air dry bulb and dry bulb transmitter HMW88 Room dry bulb and dry bulb transmitter

RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC In to 24 VAC/24 VDC Out 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

554 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY INFRARED DEW POINT & GRAINS TRANSMITTER 9002

DESCRIPTION The Amphenol Advanced Sensors VaporStat Model 9002 is an absolute humidity transmitter that measures the amount of water vapor in the air with adversity to temperature variations . The moisture level is then calculated as dew point and transmitted simultaneously as 0-10 VDC and 4-20 mA . A display and keyboard are incorporated for local indication and parameter adjustment . A contact closure is also incorporated with keyboard entries for set point and differential . The Model 9002 is wall-mounted and available with accessories for duct and OSA applications .

9002 APPLICATION The Model 9002 sampling chamber measures the infrared light absorbed by the moisture in the air and processes 9002 and it as dew point or grains of moisture per pound of dry air . T1508 Enclosure The 0-10 VDC or 4-20 mA output ranges are selected at the keyboard and displayed on the LCD readout . A control FEATURES 9 contact energizes at the set point entered on the keyboard . • Dew point accuracy ±3.6°F (±2°C) The Model 9002 is ideally suited for local alarm and signaling • 0-10V and 4-20 mA output for clean room controls, desiccant system controls, paper mill • Digital display or blank cover controls, and textile process controls as well as condensation • Patented infrared absorption platform prevention . • Gold-plated element for durability • Built-in keyboard for range adjust • Elevation correction via keyboard • Tamper-resistant keyboard cover

• 10-minute field calibration with gas HUMIDITY

SPECIFICATIONS Accuracy Dew point: ±3 .6°F (2 .0°C) @ 77°F Keypads Four-key menu control Supply Voltage 24 VAC, ±25%, 2 .75 VA Life Expectancy 15 years Signal Output simultaneous outputs: Display Two-line, 1/2" (1 .27 cm) LCD 0-10V @ 1000Ω min Output Range Adjust Within 0° to 80°F (-17 to 26°C) 4-20 mA @ 500Ω max Operating Humidity 0% to 98% Relay Output SPDT, 2A @ 24 VAC Operating Temperature 32° to 120°F (0° to 50°C) Measurement Range Dew point: 27° to 80°F (-3° to 27°C) Warranty 18 months Sensing Technology Nondispersive infrared Calibration In field with nitrogen gas Adjustments Setpoint: Adjustable, full range Differential: Adjustable, full range Altitude Limits Correctable to 5000' (1524m)

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 555 HUMIDITY INFRARED DEW POINT & GRAINS TRANSMITTER 9002

DIMENSIONS MOUNTING

3.25 1.37 in (8.26) (3.48) (cm)

5.63 (14.30)

Tamper Set Screw

WIRING CONTROLS

N L1 24 VAC Use either or both 9 outputs below 0-10V Out Signal Common 4-20 mA Out

231 8765 412 + Input NC NO clear set enter AC COM

Mounting Bracket Clear Mode Arrow Enter Button Button Button Button

HUMIDITY SETUP FACTORY OUTPUT SETTINGS CHANGING SETTINGS

Dew point, 0° to 80°F (-22° to 25°C) @ sea level 1 . Press mode and clear at the same time for five seconds Moisture = 0-140 grains per lb of dry air @ sea level to enter the adjust mode . Relay on @ 50°F (10°C), off @ 59°F (15°C) 2 . Press mode key to display item to change: elevation, dew point, grains, or relay . 3 . Use arrow keys to select ranges . 4 . Press enter to confirm selection . 5 . Press clear to finish and return to normal display .

ORDERING INFORMATION MODEL DESCRIPTION 9002 Dew point and grains 0-10 VDC/4-20 mA transmitter and SPDT contact

RELATED PRODUCTS PAGE T1508 Duct-mount accessory enclosure T1551 OSA-mount accessory enclosure 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979

556 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 3% HUMIDISTATS VH7200 SERIES

DESCRIPTION The Viconics VH7200 Series Humidistats are designed for controlling humidification and dehumidification equipment in HVAC and energy management systems . The humidistat utilizes a PI time proportional control algorithm to accurately control relative humidity . The VH7200 Series features adjustable control setpoint, and the ability to set the maximum number of output cycles from 3 to 8 per hour . Units accept a remote outdoor air temperature sensor which can be used to reset the humidity set point-minimizing energy consumption and condensation on windows and building structures . The CUS high limit protection (available only on Model VH7270 when used with a remote humidity sensor) prevents damage due to over-humidification .

FEATURES WIRING • Designer wall mounting 24 VAC Hot 24 VacCom. • 3% RH control accuracy On/Off Humidification On/Off Dehumidification • Two status LEDs On/Off Humidification On/Off Dehumidification

• Proportional high limit override eliminates HUMHUM R C condensation problems DEH DEH VH7270K1000 9 • Sensor failure protection Universal HUM DI1 HS Scom OS HL • Outdoor temperature reset 0-10 • Keypad lockout Analog 0-10 VDC Humidification Supply Humidity High Limit Sensor (0-10 VDC) • Backlit LCD two line display Digitalinput,dry contact to “Scom” Outsideair temperature sensor (thermistor) Remote humidity sensor (0-10 VDC) Sensor(s)and BI inputcommon

SPECIFICATIONS

Accuracy ±5% RH (20-100% RH) @ 50°F° to Resolution Humidity 0 .1% Temperature ± 0 .2°F HUMIDITY 90°F (10°C to 32°C) (±0 .1°C) Supply Voltage 19-30 VAC, 50/60 Hz; 2 VA Operating Humidity 0 to 95% RH non-condensing Signal Output 0-10 VDC, 2 kΩ minimum load Operating Temperature 32° to 122°F (0° to 50°C) impedance Temperature Range Outdoor Air: -40° to 122°F Relay Output 1A continuous, 3A in-rush maximum (-40° to 50°C) @ 30 VAC Enclosure ABS plastic Setpoint Range Humidification 10 to 90% RH Wiring Terminations Screw terminals Dehumidification 15 to 95% RH Dimensions 4 9"H. x 3 .4"W x 1 .1"D Binary Inputs Relay dry contact (12 .4 x 8 .6 x 2 .8 cm) Sensing Technology Bulk polymer Approvals UL File E27734, CSA, CE Display Two line, 16 character LCD Weight 0 5. lb (0 .23 Kg) Warranty 1 year

ORDERING INFORMATION MODEL DESCRIPTION VH7200A1000 Humidistat, on/off (humidify), on/off (dehumidify) VH7270F1000 Humidistat, 0-10 VDC (humidify), on/off (dehumidify) VH7270K1000 Humidistat, 0-10 VDC and on/off (humidify), on/off (dehumidify)

RELATED PRODUCTS PAGE 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 HD20K 2% duct-mount humidity sensor 511 KHD2 2% duct mount humidity transmitter, 4-20 mA output 509 KTO24 OSA thermistor sensor, Type 2, model 24, ±0.5°F (0.28°C) 1216 ST-O24 OSA thermistor sensor, Type 2, model 24, ±0.36°F (0.20°C) 1217

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 557 HUMIDITY 5% DUCT MOUNT HUMIDSTAT TDC SERIES

DESCRIPTION The Vector Model TDC-BH-U Duct Mount Humidistat is a stand-alone programmable electronic humidistat designed for controlling humidification and dehumidification equipment in HVAC and energy management systems . The TDC-BH-U Series features one internal humidity sensor, one external temperature sensor input and two relay outputs . Humidity reset is possible using the ST-O24 outdoor air temperature sensor for cold weather applications to prevent condensation . The TDC-BH-U-D Series comes with all of the features of the base model plus a time clock feature for advanced programming with 48 hour backup .

FEATURES • Humidification and Dehumidification control • External temperature input for set point setback • Programmable user interface • Optional time clock TDC-BH-U • 2 relay outputs 9 • Easy to read display • Replaceable sensor

SPECIFICATIONS Accuracy ±5% RH (10-90%) Operating Temperature 32° to 122°F (0° to 50°C) Supply Voltage 24 VAC ±10%, 50-60 Hz 1 5. VA, Enclosure Rating Polycarbonate PC (UL class V-0) 24 VDC, 63 mA Wiring Terminations Terminal block (12 to 24 AWG Anolog Input 10K Type II (Type 24) thermistor Approvals CE Relay Output 2 NO SPST Relays, 2 Amps @ 24 Weight 0 48. lb (0 .22 kg) HUMIDITY VAC Warranty 2 years Operating Humidity 0% to 95% non-condensing

CONNECTION TERMINALS

Humidify / Fan Dehumidify / Fan Terminal-description: 24 VAC/VDC GND 10kΩ Type II thermistor 1. Connection for power-supply (24 VAC/VDC, ±10%). In case of DC, connect the negative power-terminal. Common connection for analog inputs and outputs. 2. Connection for power-supply (24 VAC/VDC, ±10%). In case of DC, connect the positive power-terminal. 3. Contact “DO 1” Humidify or Fan, 2A maximum 4. Contact “DO 1” Humidify or Fan, 2A maximum 5. Contact “DO 2” Dehumidify or Fan, 2A maximum 6. Contact “DO 2” Dehumidify or Fan, 2A maximum 7. Thermistor input “RT” (10kΩ Type II thermistor) 8. Thermistor input “RT” (10kΩ Type II thermistor)

558 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 5% DUCT MOUNT HUMIDSTAT TDC SERIES

DIMENSIONS in

(cm) 3.0 (7.6) 1.9 (4.7) 3.6 (9.1) 2.7 (6.8) 2.7

WIRING

24 VAC Humidify / Dehumidify, TDC-BH-U (-D) Y Binary output 1: Humidify 0 to 24 VAC or 0 to 30 VDC Y Binary output 2: Dehumidify 0 to 24 VAC or 0 to 30 VDC R Temperature input for setback: 10kΩ Type II thermistor 2 3 5 7 8 9 G Q13 Q23 B1 M Humidify plus fan control, TDC-BH-U (-D) – W04 Y Binary output 1: Humidify 0 to 24 VAC or 0 to 30 VDC Y Binary output 2: Fan 0 to 24 VAC or 0 to 30 VDC 1 4 6 TDC-BH-U G0 Q14 Q24 R Temperature input for setback: 10kΩ Type II thermistor Dehumidify plus fan control, TDC-BH-U (-D) – W05 Y Binary output 1: Fan 0 to 24 VAC or 0 to 30 VDC Y Binary output 2: Dehumidify 0 to 24 VAC or 0 to 30 VDC R Temperature input for setback: 10kΩ Type II thermistor (GND) HUMIDITY

ORDERING INFORMATION

MODEL DESCRIPTION TDC-BH-U-W20 5% duct mount humidistat for humidification and dehumidification with display TDC-BH-U-W24 5% duct mount humidifying humidistat with display and fan control option TDC-BH-U-W25 5% duct mount dehumidifying humidistat with display and fan control option TDC-BH-U-D-W20 5% duct mount humidistat for humidification and dehumidification with display with programmable time clock TDC-BH-U-D-W24 5% duct mount humidifying humidistat with display, fan control option and programmable time clock TDC-BH-U-D-W25 5% duct mount dehumidifying humidistat with display, fan control option and programmable time clock

RELATED PRODUCTS PAGE AES-HT-A5 5% Replacement humidity element AMC-1 Cable gland for SDC-H1 AMC-2 Conduit fitting, 1/2 in NPT for SDC-H ST-R24 Raw temperature sensor with six foot cable, 10kΩ Type II thermistor 1247 ST-D24 Eight inch duct sensor with six foot cable, 10kΩ Type II thermistor 1197 SD-TN10-20-2 Eight inch duct sensor with six foot cable, 10kΩ Type II thermistor SDB-TN10-12-W Five inch duct sensor with housing and six foot cable, 10kΩ Type II thermistor SDB-TN10-20-W Eight inch duct sensor with housing and six foot cable, 10kΩ Type II thermistor ST-O24 Outdoor temperature sensor 1217 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 559 HUMIDITY 5% WALL MOUNT HUMIDISTAT TCY-BH SERIES

DESCRIPTION The Vector Model TCY-BH-U Wall Mount Humidistat is a stand-alone programmable electronic humidistat designed for controlling humidification and dehumidification equipment in HVAC and energy management systems . The TCY-BH-U Series features one internal humidity sensor, one external temperature sensor input and two relay outputs . Humidity reset is possible using the ST-024 outdoor air temperature sensor for cold weather applications to prevent condensation . The TCY-BH-U-D Series comes with all of the features of the base model plus a time clock feature for advanced programming with 48 hour backup .

FEATURES • Humidification and dehumidification control • External temperature input for set point setback • Programmable user interface • Optional time clock 9 • 2 relay outputs • Easy to read display TCY-BH-U • Replaceable sensor

SPECIFICATIONS Supply Voltage 24 VAC ±10%, 50-60 Hz 3 VA, Operating Temperature 32° to 122°F (0° to 50°C) 24 VDC, 125 mA Enclosure Rating ABS plastic (UL94 class V-0) Accuracy ±5% RH (10-90%) Wiring Terminations Terminal block (12 to 24 AWG) Dimensions 4 4"H. x 2 .9"W x 1 .8"D Anolog Input 10k Type II (Type 24) Thermistor (11 .2 x 7 .3 x 4 .7 cm) Relay Output 2 NO SPST Relays, 2 Amps @ Approvals CE HUMIDITY 24 VAC Weight 0 58. lb (0 .26 kg) Operating Humidity 0% to 95% non-condensing Warranty 2 years

CONNECTION TERMINALS

560 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 5% WALL MOUNT HUMIDISTAT TCY-BH SERIES

DIMENSIONS / WIRING

4.45 4.7 in (11.3) (1.8) (cm)

1.69 (4.3)

2.87 (7.3)

9 0...250V AC Humidify/Dehumidify, TCY-BH-U (-D) RT 24V AC YB1 Humidifier 0…24 VAC or 0…30 VDC YB2 De-humidifier 0…24 VAC or 0…30 VDC RT Temperature input for setback: NTC 10kΩ @ 25°C (77°F) 2 3 5 7 8 G Q13 Q23 B1 M Humidify plus fan control, TCY-BH-U (-D) – W04 YB1 Humidifier 0…24 VAC or 0…30 VDC 1 4 6 TCY-BH-U YB2 Fan 0…24 VAC or 0…30 VDC G0 Q14 Q24 RT Temperature input for setback: NTC 10kΩ @ 25°C (77°F) HUMIDITY

YB1 YB2 Dehumidify plus fan control, TCY-BH-U (-D) – W05 YB1 Fan 0…24 VAC or 0…30 VDC OV (GND) YB2 De-humidifier 0…24 VAC or 0…30 VDC RT Temperature input for setback: NTC 10kΩ @ 25°C (77°F)

ORDERING INFORMATION MODEL DESCRIPTION TCY-BH-U-W20 5% wall mount humidistat for humidification and dehumidification with display with programmable time clock TCY-BH-U-W24 5% wall mount humidifying humidistat with display, fan control option and programmable time clock TCY-BH-U-W25 5% wall mount dehumidifying humidistat with display, fan control option and programmable time clock TCY-BH-U-D-W20 5% wall mount humidistat for humidification and dehumidification with display TCY-BH-U-D-W24 5% wall mount humidifying humidistat with display and fan control option TCY-BH-U-D-W25 5% wall mount dehumidifying humidistat with display and fan control option

RELATED PRODUCTS PAGE AES-HT-A5 5% Replacement humidity element AMC-1 Cable gland for SDC-H1 AMC-2 Conduit fitting, 1/2 in NPT for SDC-H S-TN10-2 Raw temperature sensor with six foot cable, 10kΩ Type II thermistor SD-TN10-12-2 Eight inch duct sensor with six foot cable, 10kΩ Type II thermistor SD-TN10-20-2 Eight inch duct sensor with six foot cable, 10kΩ Type II thermistor SDB-TN10-12-W Five inch duct sensor with housing and six foot cable, 10kΩ Type II thermistor SDB-TN10-20-W Eight inch duct sensor with housing and six foot cable, 10kΩ Type II thermistor SOD-TN10 Outdoor temperature sensor DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 561 HUMIDITY 3% WALL AND DUCT PROPORTIONAL CONTROLLER TCI SERIES

DESCRIPTION The Vector Model TCI Wall and Duct Proportional Controller is designed for proportional control of humidification and dehumidification equipment in HVAC and energy management systems . The "23" models comes with a time clock for advanced programming with 48 hour backup and the "13" models do not . The "H" models have internal relative humidity sensors and the others without "H" in model number must use a remote relative humidity sensor (ordered separately) for RH measurement .

FEATURES • Humidification and dehumidification control • External temperature input for set point setback • Programmable user interface • Optional time clock • 2 analog outputs and one digital output • Easy to read display

9 TCI

SPECIFICATIONS Supply Voltage 24 VAC ±10% 3 VA, 50-60 Hz; 24 Operating Temperature 32° to 122°F (-25° to 50°C) VDC, 125 mA Enclosure Rating ABS Plastic Accuracy ±3% RH (20%-80%) Sensing Technology Capacitive sensor Signal Output Wiring Terminations Terminal block (12 to 24 AWG) Analog 0/2-10 VDC or 0/4-20 mA @250Ω Dimensions 4 4". H x 2 .9" W x 1 .8" D Digital 24 VAC/VDC @ 2 A (11 .2 x 7 .3 x 4 .7 cm) Signal Input Approvals CE

HUMIDITY 13 0/2-10 VDC or 0/4-20 mA @ 240Ω Weight 23 0/2-10 VDC or 0/4-20 mA @ 240Ω & 13 0 58. lb (0 .26 Kg) 10kΩ Type II thermistor (24) 23 0 6. LB (0 .27 kG) Measurement Range 0 to 100 % RH Warranty 2 years Operating Humidity 0% to 95% non-condensing

562 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY 3% WALL AND DUCT PROPORTIONAL CONTROLLER TCI SERIES

WIRING

AC/DC AC/DC Power Supply Power Supply +– +– Com Com 1 1

24+ 24+ 2 2

Output Com Output Com 3 3

Digital Output Digital Output 4 4

Analog Output Analog Output 5 5

Analog Output Analog Output 6 6

Univseral Input Univseral Input 7 7 Thermistor Input 9 8 13 Models 23 Models

Logic: Logic: 13 models with "U" in model number 23 models with "U" in model number #7 is Remote Temperature #7 is Remote Humidity or Temperature 13 models with "U" in modle number #8 is Temperature only #7 is Remote Humidity 23 models with "U" in modle number HUMIDITY #7 is Remote Humidity #8 is Temperature only

ORDERING INFORMATION

MODEL DESCRIPTION TCY3-T1102-H-U-W24 3% wall mount proportional humidistat with display for humidification TCY3-T1102-H-U-W25 3% wall mount proportional humidistat with display for dehumidification TCY3-T1102-H-U-D-W24 3% wall mount proportional humidistat with display for humidification plus clock and time schedules TCY3-T1102-H-U-D-W25 3% wall mount proportional humidistat with display for dehumidification plus clock and time schedules TCY3-T1102-U-W26 Wall mount proportional humidistat with display for humidification TCY3-T1102-U-W27 Wall mount proportional humidistat with display for dehumidification TCY3-T1102-U-D-W26 Wall mount proportional humidistat with display for humidification plus clock and time schedules TCY3-T1102-U-D-W27 Wall mount proportional humidistat with display for dehumidification plus clock and time schedules

RELATED PRODUCTS PAGE HD30K AMC-2 Conduit fitting, 1/2 in NPT for SDC-H 530 KHD3 3% Duct mount humidity transmitter, 4-20 mA output 528 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 ST-D24-XH Duct 10KΩ Tpye II thermistor with handi box

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 563 HUMIDITY CONDENSATION MONITOR EE46

DESCRIPTION The E+E EE46 Condensation Monitors are used to monitor the formation of condensation on chilled ceilings or to prevent condensation at critical spots of heating, ventilation and air conditioning systems . It is also used as a dew point monitor for systems operating near the dew point .

The condensation monitor measures the relative humidity near the dew point using its high-quality capacitive sensor . Once a 90% RH condition is reached, a contact will energize signaling an approaching condensation condition and that an appropriate action is required to avoid condensation forming . An additional status light indicates and visually confirms the condensation danger .

The EE46 is highly insensitive to dust and dirt and is ideal for mounting on walls, ducts and pipes up to 2" . Each EE46 EE46 comes with an adjustable and removable cable tie for mounting but also has an adhesive back for added security . 9 FEATURES • Compact design • Fast response time • Dust protection • Easy mounting • Visual status indication

SPECIFICATIONS Supply Voltage 24 VAC ±20% . 0 .1 VA; 24 VDC ±20%, 3 mA Switch Point 90% RH, ±3% Relay Output 24 VAC/VDC, 1A Display Single red LED Operating Humidity 10 to 100% RH

HUMIDITY Operating Temperature 32˚ to 122˚F (0˚ to 50˚C) Materials Of Construction Polycarbonate Enclosure Rating Fire resistant UL94-V0 Dimensions 2 .5" H x 2 .1" W x 0 9". D (6 .4 x 5 .3 x 2 .2 cm) Approvals CE Weight 0 .13 lb (0 .95 Kg) Warranty 1 year

WIRING Connection Diagram Status Indication

V+ Power Supply 24V AC/DC ±20% GND

COM

LED continuous red: Operating < 90% RH LED blinking red: Condensation danger

564 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY CONDENSATION MONITOR EE46

DIMENSIONS

Dimensions - in (mm) Installation

Pipe mounting

(50) heat-conductive film

Maximum 2" (50) Maximum Ø 2"

Wall mounting 1.32 (33.5) 0.87 (22.0) heat-conductive film HUMIDITY 0.18 (4.5) Ø 2.50 (63.5) 0.9 (23)

1.70 (43) 2.09 (53)

ORDERING INFORMATION

MODEL DESCRIPTION EE46 Pipe, wall or duct mounted condensation monitor

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 565 HUMIDITY ROOM AND DUCT HUMIDISTATS HC-101, HC-201

DESCRIPTION The Schneider Electric Models HC-101 and HC-201 Humidistats are used for low or line voltage ON/OFF single-stage control of humidifiers, dehumidifiers, valves, solenoids, compressors, relays, and other electrical components .

FEATURES • 18-month warranty • Economical and reliable humidity control

WIRING HC-101 HC-201 (brown) N .O . MAXIMUM ELECTRICAL RATINGS (red) N .C . VAC FLA LRA RESISTIVE PILOT DUTY Drop in RH MODEL 50/60 Hz AMPS VA Brown makes on drop in humidity . (orange) HC-101 24 —— 860 All units provided with green Common grounding lead ( ) . HC-201 120 7 .2 43 .2 8 345

SPECIFICATIONS / ORDERING INFORMATION AMBIENT LIMITS °F (°C) SCALE 9 MODEL DESCRIPTION DIFF Operating Shipping and CONNECTION WEIGHT COVER DIMENSIONS RANGE Storage in (cm) (HxWxD) HC-101 Room 10% to 90% RH 5% 40 to 125 -40 to 140 6" (15.0 cm) 1.0 lb Beige 4.38 x 2.88 x 1.63 (4 to 52) (-40 to 60) Color-coded leads (0.45 kg) plastic (11.13 x 7.32 x 4.14) HC-201 Duct 15% to 95% RH 5% 40 to 125 -40 to 140 Coded screw 1.5 lb Metal 4.38 x 6.50 x 2.25 (4 to 52) (-40 to 60) terminals (0.68 kg) (11.13 x 16.51 x 5.72) ROOM HUMIDISTAT W43A-14 DESCRIPTION The SPDT contact action of the Johnson Controls Model W43A- 14 Humidistat provides control of humidifying or dehumidifying HUMIDITY equipment . A flush-mounting bracket that fita a standard outlet box is supplied . The Model W43A features field-adjustable high and low W43A-14 stops . Stops can be set for locked setting .

ACCESSORIES The Model W43A-14 includes A faceplate for horizontal mounting . The plate is for on-the-job installation over vertical plate . It can be field DIMENSIONS converted to concealed adjustment . Specify plate kit PLT333-12R (vertical) or PLT333-9R (horizontal) . MODEL SWITCH RANGE DIFF % DIMENSIONS ACTION in (cm) (HxW) FEATURES W43A-14 SPDT 0% to 70% RH 4% RH 4.71 x 2.96 • One-year warranty (12.0 x 7.5) • Horizontal or vertical mounting MAXIMUM ELECTRICAL RATINGS WIRING MOTOR RATINGS VAC 120 208 240 WEIGHT lb (kg) AC full load amps 6 0. 3 5. 3 0. 1 0. (0 .45) H AC locked rotor amps 36 .0 21 .0 18 .0 — Pilot Duty 125 VA, 24-277 VAC (low or line voltage)

L ORDERING INFORMATION

C MODEL DESCRIPTION W43A-14C SPDT switch action, 4% RH Diff % Humidistat Action on increase of humidity

566 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 HUMIDITY OUTDOOR ASPIRATED HUMIDITY / TEMPERATURE HOUSING A21

DESCRIPTION Model A21 Outdoor Aspirated Humidity/Temperature Housing provides powered aspiration for outdoor monitoring of humidity and temperature . The NEMA 3R enclosure is painted white to reduce the effect of radiation, and the enclosure has a lockable latch for security .

OPERATION The fan pulls air in from the lower vent intake and exhausts the air out the upper opposing vent of the enclosure at 12 CFM . The 24 VDC power is supplied for both the fan and transmitters . The transmitter power is internally filtered from any fan motor noise that might affect the transmitter signal .

SPECIFICATIONS Supply Voltage 24 VDC @ 110 mA (plus power Operating Temperature requirements for the humidity/ -40° to 120°F (-40° to 49°C) temperature transmitters) Enclosure Rating NEMA 3R with white enamel paint and 9 Maximum Output latch for padlock Impedance 47Ω added to the 4-20 mA transmitter Hinge Piano-type, left-hand side Fan 12 CFM Weight 6 .31 lb (2 .9 Kg) Filter Type Washable foam filter Warranty 1 year

WIRING DIMENSIONS in Dry Bulb Temperature 0.20 0.5 0.5

To Controller * HUMIDITY (cm) (0.50) 4.7 (1.27) 5.0 (1.27) Input (12.06) (12.7)

- 24VDC Air Exhaust 1.75 1.0 (2.54) + Power 9.0 (4.44) Left Side Supply (22.86) Terminal Strip A B C DEF Fan A C DEF (projected B 10.0 3.65 1.0 (25.40) forward + – + (9.27) (2.54) 3.5 (8.89) for 6.5 Not used easy wiring) (16.51) Front View 5.25 Do not use (13.34) or terminate Right Side Lower Back Plate* Air Intake 3.0 (7.62) 4.25"W x 4.25"H x 3"D - 4-20 mA to 0.5 (1.27) Controller Input + 7.0 (17.78) 0.37 (0.95) 0.25 6.32 (16.05) + – (0.64) Conduit Entry 1/2" & 3/4" Knockouts Installed * Temperature Bottom View Transmitter 0.5" and 0.75" sensors are directly knockouts on *Estimated usable dimensions wired to the controller. centerline and 1.64 3.0 They do not wire to height shown (4.15) (7.62) the terminal strip. A21 Mounting Interior

ORDERING INFORMATION MODEL DESCRIPTION A21 Outdoor aspirated humidity/temperature housing

RELATED PRODUCTS PAGE A21-FAN Replacement fan assembly DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995 DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 HW20K 2% wall-mount humidity sensor 511 HW30K 3% wall-mount humidity sensor 530 KTM* Series KTM* Series raw encapsulated thermistor and RTD sensors 1245 PN-46 Aluminum sensor holder with adhesive backing 1298 ST-R* Series ST-R* Series raw encapsulated thermistor and RTD sensors

March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 567 HUMIDITY HUMIDITY SELECTION CHART HUMIDITY SELECTION CHART

PRODUCT MNFR ACCURACY MOUNTING SIGNAL MEASUREMENT ATTRIBUTES APPLICATION W43A-14 JCI 4% diff. Wall SPDT RH Accuracy Limit control HC-101 Schneider 5% diff. Wall SPDT RH Aesthetics Limit control HC-201 Schneider 5% diff. Duct SPDT RH Duct Limit control GEH5S GE 5% Wall 4-20/0-10 RH/T optional Replaceable sensor Monitoring SHR-5P-W Setra 5% Wall 4-20/0-10 RH Replaceable sensor Monitoring GEH5D GE 5% Duct 4-20/0-10 RH/T optional Replaceable sensor Monitoring SRH-5P-D Setra 5% Duct 4-20/0-10 RH Replaceable sensor Monitoring GEH5O GE 5% OSA 4-20/0-10 RH/T optional Replaceable sensor Monitoring SRH-5P-O Setra 5% OSA 4-20/0-10 RH Replaceable sensor Monitoring KHR3 Kele 3% Wall 4-20 mA RH/T optional Replaceable sensor Monitoring SHR-3P-W Setra 3% Wall 4-20 mA RH Replaceable sensor Monitoring HW30K/HW31K Kele 3% Wall 4-20 mA RH/T optional Executive housing Monitoring HMW40/50 Vaisala 3% Wall 4-20/0-10 RH/T optional Replaceable sensor Monitoring ACI-3-R ACI 3% Wall 4-20/0-10 RH/T optional Delta housing Monitoring BA/H300-B BAPI 3% Wall 4-20/0-5 RH/T optional BAPI housing Monitoring KHD3 Kele 3% Duct 4-20 mA RH/T optional Replaceable sensor Monitoring SHR-3P-D Setra 3% Duct 4-20 mA RH Replaceable sensor Monitoring HD30K/31K Kele 3% Duct 4-20 mA RH/T optional Metal/universal enclosure Monitoring HMD40/50 Vaisala 3% Duct 4-20/0-10 RH/T optional Replaceable sensor Monitoring ACI-3-D ACI 3% Duct 4-20/0-10 RH/T optional 4-20 mA and 0-10V Monitoring BA/H300-D BAPI 3% Duct 4-20/0-5 RH/T optional 4-20 mA and 0-5V Monitoring KHO3 Kele 3% OSA 4-20 mA RH/T optional Replaceable sensor Monitoring SHR-3P-O Setra 3% OSA 4-20 mA RH Replaceable sensor Monitoring 9 HO30K Kele 3% OSA 4-20 mA RH/T optional Metal enclosure Monitoring HO31K Kele 3% OSA 4-20 mA RH/T optional Universal enclosure Monitoring ACI-3-O ACI 3% OSA 4-20/0-10 RH/T optional 4-20 mA and 0-10V Monitoring BA/H300-O BAPI 3% OSA 4-20/0-5 RH/T optional 4-20 mA and 0-5V Monitoring VH7200 Viconics 3% Wall 0-10 V RH Humidistat Limit control KHR2 Kele 2% Wall 4-20 mA RH/T optional Replaceable sensor RH control HW20K Kele 2% Wall 4-20 mA RH/T optional Executive housing RH control ACI-2-R ACI 2% Wall 4-20/0-10 RH/T optional Delta housing RH control GEH2S GE 2% Wall 4-20/0-10 RH/T optional Replaceable sensor RH control EHRH GE 2% Wall 4-20 mA RH/T optional Wash-down housing RH control, pool HT2-S Minco 2% Wall 4-20 mA RH/T optional Minco housing RH control HT829-S Minco 2% Wall 4-20 mA RH, RH/T One-point calibration RH control HMW-60U Vaisala 2% Wall 4-20 mA RH/T optional Vaisala housing RH control HMW-70U Vaisala 2% Wall 0-5 VDC RH/T optional Voltage output RH control BA/H200-B BAPI 2% Wall 4-20/0-5 RH/T optional BAPI housing RH control KHD2 Kele 2% Duct 4-20 mA RH/T optional Replaceable sensor RH control HUMIDITY HD20K Kele 2% Duct 4-20 mA RH/T optional Metal enclosure RH control ACI-2-D ACI 2% Duct 4-20/0-10 RH/T optional 4-20 mA and 0-10V RH control GEH2D GE 2% Duct 4-20/0-10 RH/T optional Replaceable sensor RH control HT2D Minco 2% Duct 4-20 mA RH/T optional Metal enclosure RH control HT829-D Minco 2% Duct 4-20 mA RH, RH/T One-point calibration RH control HMD-60U Vaisala 2% Duct 4-20 mA RH/T optional Metal enclosure RH control HMD-70U Vaisala 2% Duct 0-5 VDC RH/T optional Metal enclosure RH control BA/H200-D BAPI 2% Duct 4-20/0-5 RH/T optional 4-20 mA and 0-5V RH control KHO2 Kele 2% OSA 4-20 mA RH/T optional Replaceable sensor RH control HO20K Kele 2% OSA 4-20 mA RH/T optional Metal enclosure RH control ACI-2-O ACI 2% OSA 4-20/0-10 RH/T optional 4-20 mA and 0-10V RH control GEH2O GE 2% OSA 4-20/0-10 RH/T optional Replaceable sensor RH control HT2O Minco 2% OSA 4-20 mA RH/T optional Metal enclosure RH control HT829-O Minco 2% OSA 4-20 mA RH, RH/T One-point calibration RH control BA/H200-O BAPI 2% OSA 4-20/0-5 RH/T optional 4-20 mA and 0-5V RH control EE29 E&E 1.3% Wall 4-20/0-5/0-10 RH/T Metal or plastic housing Clean room control ACI/RH1-R ACI 1% Wall 4-20 mA RH/T optional Executive housing Clean room control HT829-S1N1 Minco 1% Wall 4-20 mA RH Minco housing Clean room control ACI-RH1-D ACI 1% Duct 4-20 mA RH/T optional Plastic enclosure Clean room control HT829-D1N1 Minco 1% Duct 4-20 mA RH One-point calibration Clean room control ACI-RH1-O ACI 1% OSA 4-20 mA RH/T optional Plastic enclosure Calculation input HT829-O1N1 Minco 1% OSA 4-20 mA RH One-point calibration Calculation input 9002 Telair 1.8F Wall/Duct 4-20 mA DP/T IR measurement Condensation control RH Relative Humidity is the ratio of actual water vapor in the air vs. the water vapor that the air can hold at saturation. DB Dry bulb temperature is the temperature of the air using a dry sensor without any effect from evaporative cooling. WB Wet bulb temperature is the temperature of the air using a wet sensor, which measures the cooling effect from evaporation. DP Dew point temperature is the temperature at which water vapor begins to condense into water liquid, which is at 100% RH. EN Enthalpy is the measure of the heat energy in the air. 568 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014