Nra Precision Pistol Rules
Total Page:16
File Type:pdf, Size:1020Kb

Load more
Recommended publications
-
Bersa Thunder 9 Pistol
Dope Bag is compiled by Staff and Contributing Editors: David Andrews, Hugh C. Birnbaum, Bruce N. Canfield, Russ Carpenter, O. Reid Coffield, William C. Davis, Jr., Pete Dickey, Charles Fagg, Robert W. Hunnicutt, Mark A. Keefe, IV, Ron Keysor, Angus Laidlaw, Scott E. Mayer, Charles E. Petty, Robert B. Pomeranz, O.D., Charles R. Suydam and A.W.F. Taylerson. CAUTION: Technical data and information contained herein are intended to provide information based on the limited experience of individuals under specific condi- tions and circumstances. They do not detail the compre- hensive training procedures, techniques and safety pre- cautions absolutely necessary to properly carry on simi- lar activity. Read the notice and disclaimer on the con- tents page. Always consult comprehensive reference manuals and bulletins for details of proper training requirements, procedures, techniques and safety pre- cautions before attempting any similar activity. BERSA THUNDER 9 PISTOL RGENTINA probably doesn’t come to Amind when one calls the roll of pistol- making nations, but Bersa, S.A., has been making pocket pistols there for many years. Now the firm has stepped up to the chal- lenge of a full-sized 9 mm with the new Thunder 9. There’s such a glut of 9 mm autoloaders these days that it takes some- thing a bit out of the ordinary to make a splash, and the Thunder 9 provides it, with The Bersa Thunder 9 seems several interesting features. to have been inspired by the When first examining the Thunder 9, we elegant but very expensive Walther P88. The Argentine- immediately were reminded of the Walther made Bersa offers many of P88 (July 1991, p. -
April 30) Regular Price’S: Adult Is $25.00, Children 12 Years of Age and Under Is $10.00
ESCONDIDO FISH & GAME ASSOCIATION A PRIL 2 0 1 8 Affiliated with: National Rifle Association. • Calif. Rifle & Pistol Association. • California Outdoor Heritage Alliance Single Action Shooting Society • San Diego Wildlife Federation & The National Muzzle Loading Rifle Association Civilian Marksmanship Program • National Shooting Sports Foundation MEETINGS Board Meeting 1st Thursday NEXT WORK PARTY IS May 19, 2018 6:30 PM - Meeting Hall Provisional members - This is a good chance to get in your required General Meeting volunteer hours. The next work party will be August 19, 2018 2nd Thursday 7:15 PM Meeting Hall The Presidents’ Corner OFFICERS President - Neil Pisk LM Annual Association BBQ 760.781.1289 The association BBQ will take place on May 20. Early bird tickets are $20.00. [email protected] (Through April 30) Regular price’s: Adult is $25.00, children 12 years of age and under is $10.00. Advance tickets can be purchased through BOD members or the Vice President - Patrick Watson Association clerk. Tickets can be purchased at the event. 760.522.3912 Junior Muzzleloader Our Junior Muzzleloader event was held on March 6, and thanks to Ren Everett Recording Secretary - Geoff Orchin LM it went off smooth as silk. Three (3) young shooters braved the weather and 760.741.3721 participated and all seemed to have had a great day. All of the young shooters [email protected] got to try their hand at caplock and flintlock rifle. One participant had never Board Members fired a firearm at all and still posted an amazing score. I want to thank all of the Darrin Eaton LM 760.630.8339 folks from SPAR (Society of Primitive American Riflemen) and the Black Powder Ren Everett LM 760.432.2089 Silhouette shooters for coming up and taking the time to coach and teach this Linda Linaker LM 760-638-0573 sport to our youngsters. -
Thompson Brochure 9Th Edition.Indd
9th Edition Own A Piece Of American History Thompson Submachine Gun General John T. Thompson, a graduate of West Point, began his research in 1915 for an automatic weapon to supply the American military. World War I was dragging on and casualties were mounting. Having served in the U.S. Army’s ordnance supplies and logistics, General Thompson understood that greater fi repower was needed to end the war. Thompson was driven to create a lightweight, fully automatic fi rearm that would be effective against the contemporary machine gun. His idea was “a one-man, hand held machine gun. A trench broom!” The fi rst shipment of Thompson prototypes arrived on the dock in New York for shipment to Europe on November 11, 1918 the day that the War ended. In 1919, Thompson directed Auto-Ordnance to modify the gun for nonmilitary use. The gun, classifi ed a “submachine gun” to denote a small, hand-held, fully automatic fi rearm chambered for pistol ammunition, was offi cially named the “Thompson submachine gun” to honor the man most responsible for its creation. With military and police sales low, Auto-Ordnance sold its submachine guns through every legal outlet it could. A Thompson submachine gun could be purchased either by mail order, or from the local hardware or sporting goods store. Trusted Companion for Troops It was, also, in the mid ‘20s that the Thompson submachine gun was adopted for service by an Dillinger’s Choice offi cial military branch of the government. The U.S. Coast Guard issued Thompsons to patrol While Auto-Ordnance was selling the Thompson submachine gun in the open market in the ‘20s, boats along the eastern seaboard. -
Saturday, April 18, 2020
– Large, Grey Eagle/St. Rosa, MN Area – Collectible Tractors and 84 Firearms and Firearms, Collectible Tractors & Equipment Equipment Accessories Sell at 12:00 Noon Lifetime As we are transitioning into retirement, we will sell the following at auction located Collection Collectibles, Shop 1¼ miles north of St. Rosa, MN on County #17 & 35; or being 4 miles north of Melrose, MN on County 13, then 4 miles Equipment, Tools and east on County 17, then ¼ mile north on County 35; or being 1.75 miles south of Grey Eagle, MN on County 33 to the Rock Tavern, Miscellaneous then 4 miles south on County 47 & 35 to home #43311. Follow the Mid-American Auction Co. signs; roads will be plainly marked. Gas Engines, Antique Collectible Tractors & Collectible Items & Farm Equipment 2020 Nice Copper Clad Gas/ Farmall Super Saturday, April 18, Wood Combination C, PTO, Good Kitchen Range, One Metal, Auxiliary Sale Time: 10:30 A.M. Boser’s Lunch Wagon Owner Hydraulics, Sells with Woods 6-Ft. NOTE: The Voits have lived in this area for many years and are well known throughout the community. Don has enjoyed using and Mid-Mount Finishing collecting firearms as well as being an avid hunter and outdoorsman since he was a small boy. Don is also known as a fabricator making Mower, Tractor countless attachments to existing equipment as well as manufacturing many unique new items for customers, friends and neighbors Ser. #122435 1944 John Deere Hand-Crank Styled Model throughout Central Minnesota. After seeing his shop and expertise in many fields, I don’t think there is anything he couldn’t repair Model D Kohler B Tractor, PTO, Cultivator Lift, Good Metal, or make better. -
FIREARM SAFETY CERTIFICATE MANUAL for California Firearms Dealers and DOJ Certified Instructors
F S C Firearm Safety Certificate M A N U A L for California Firearms Dealers and DOJ Certified Instructors California Department of Justice Division of Law Enforcement Bureau of Firearms June 2020 FIREARM SAFETY CERTIFICATE MANUAL For California Firearms Dealers and DOJ Certified Instructors TABLE OF CONTENTS Introduction. 1 Firearms Dealer Responsibilities The Firearm Safety Certificate Law. .2 Verifying and Recording FSC Information on a DROS. 2 Firearm Safety Certificate Exemptions. 3 Safe Handling Demonstration Affidavits. 6 Firearm Safety Certificate Study Guide. 6 DOJ Certified Instructor Responsibilities The Firearm Safety Certificate Law. .7 Firearm Safety Certificate - Certified Instructor Cards. 7 Administering the FSC Test and Issuing FSCs. 7 Firearm Safety Certificate Fees. 7 The Firearm Safety Certificate Test Format. 7 Firearm Safety Certificate Test Guidelines. 8 Scoring the Firearm Safety Certificate Test. .8 Firearm Safety Certificate Issuance. 9 Firearm Safety Certificate Card Replacement. 9 Firearm Safety Certificate Record Keeping. 9 FSC Test Disqualification and Specific Acts of Collusion. 10 Safe Handling Demonstrations. 10 APPENDIX I Safe Handling Demonstration Steps (Conventional Firearms). 12 Semiautomatic Pistol. 12 Double-Action Revolver. 15 Single-Action Revolver. 17 Pump Action Long Gun. 19 Break-Top Long Gun. 20 Bolt Action Long Gun. 21 Lever Action Long Gun. 22 Semiautomatic Long Gun With a Detachable Magazine. 23 Semiautomatic Long Gun With a Fixed Magazine. 24 Safe Handling Demonstration Steps (Alternative Designs). 25 Semiautomatic Pistol With a Non-Locking Slide. 25 Semiautomatic Pistol With a Fixed Magazine. 26 Semiautomatic Pistol With a Magazine Operated Toggle Lock. 26 Semiautomatic Pistol With a Top-Feeding Magazine. 27 Semiautomatic Pistol With a Tip-Up Barrel. -
Ar15 Semi—Automatic Instruction/ Safety Manual Caution
AR15 SEMI—AUTOMATIC INSTRUCTION/ SAFETY MANUAL CAUTION: USE ONLY CLEAN, DRY, ORIGINAL, HIGH QUALITY COMMERCIALLY MANUFACTURED AMMUNITION IN GOOD CONDITON which is appropriate to the caliber of your firearm. We do not recommend the use of remanufactured or hand loaded ammunition because it may cause severe damage to yourself and/ or your rifle. Page 1 SECTION 1 PRECAUTIONS READ AND UNDERSTAND ALL THE FOLLOWING PRECAUTIONS BEFORE REMOVING THIS FIREARM FROM ITS PACKAGE. ! WARNING: IF THIS FIREARM IS CARELESSLY OR IMPROPERLY HANDLED, UNINTENTIONAL DISCHARGE COULD RESULT AND COULD CAUSE INJURY, DEATH, OR DAMAGE TO PROPERTY. CAUTION: PRIOR TO LOADING AND FIRING, CAREFULLY READ THIS INSTRUCTION MANUAL WHICH GIVES BASIC ADVICE ON THE PROPER HANDLING AND FUNCTIONING OF THIS RADICAL FIREARMS SYSTEM. However, your safety and the safety of others (including your family) depends on your mature compliance with that advice, and your adoption, development and constant employment of safe practices. If unfamiliar with firearms, seek further advice through safe handling courses run by your local gun clubs, NRA approved instructor, or similar qualified organizations. Page 2 NOTICE: Radical Firearms shall not be responsible for injury, death, or damage to property resulting from either intentional or accidental discharge of this firearm, or from its function when used for purposes or subjected to treatment for which it was not designed. Radical Firearms will not honor claims involving this firearm which result from careless or improper handling, unauthorized adjustment or parts replacement, corrosion, neglect, or the use of wrong caliber ammunition, or the use of ammunition other than original high quality commercially manufactured ammunition in good condition, or any combination thereof. -
Protective Force Firearms Qualification Courses
PROTECTIVE FORCE FIREARMS QUALIFICATION COURSES U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security AVAILABLE ONLINE AT: INITIATED BY: http://www.hss.energy.gov Office of Health, Safety and Security Protective Force Firearms Qualification Courses July 2011 i TABLE OF CONTENTS SECTION A – APPROVED FIREARMS QUALIFICATION COURSES .......................... I-1 CHAPTER I . INTRODUCTION ................................................................................... I-1 1. Scope .................................................................................................................. I-1 2. Content ............................................................................................................... I-1 CHAPTER II . DOE FIREARMS QUALIFICATION COURSE DEVELOPMENT PROCESS ................................................................................ II-1 1. Purpose ..............................................................................................................II-1 2. Scope .................................................................................................................II-1 3. Process ..............................................................................................................II-1 4. Roles .................................................................................................................II-2 CHAPTER III . GENERAL INSTRUCTIONS FOR FIREARMS QUALIFICATION COURSES.............................................................................III-1 CHAPTER IV -
National Firearm Trigger Guard Facts
National Firearm Facts: • Firearms are second to motor vehicles as the leading cause of death from injury in the U.S. (Public Health Data Watch, August 2000, Public Health - Seattle & King County) • 60.9% of firearms used in school-associated homicides or suicides came from the perpetrator’s home or from a friend or relative of the perpetrator. (Source of Firearms Used by Students in School - Associated Violent Deaths - United States, 1992-1999, MMWR Weekly, March 7, 2003/52(09); 169-172) • Nearly 170,000 children and youth lived in households with loaded and unlocked firearms in 2002, according to researchers at the Centers for Disease Control and Prevention. “It is important to identify, implement and evaluate effective methods to prevent firearm-related morbidity and mortality – from counseling youth and adults with depressive symptoms, to evaluating firearm safety technologies, to a variety of safe storage options,” the researchers conclude. Safe Storage of Guns & Ammunition Reduces Risk of Firearm Injury Risk to Youth Unloading and locking guns and ammunition in separate locations is associated with a significant decrease in firearm injuries in homes with children and teenagers, according to a study by researchers from the Harborview Injury Prevention and Research Center of the University of Washington. TIPS FOR PARENTS: It is normal for young children to be curious and explore in drawers, cabinets and closets. They are also fascinated with firearms. A recent study showed that three out of four children who are 8 to 12 years old will handle a firearm they find. About half of those will pull the trigger. -
Gordon V. Sig Sauer, Inc
Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 1 of 31 IN THE UNITED STATES DISTRICT COURT FOR THE SOUTHERN DISTRICT OF TEXAS HOUSTON DIVISION DANTÉ GORDON, individually and on behalf of all others similarly situated, CASE NO. _____________ Plaintiff, v. CLASS ACTION COMPLAINT SIG SAUER, INC., JURY TRIAL DEMANDED Defendant. PLAINTIFF’S ORIGINAL COMPLAINT Plaintiff Danté Gordon, individually and on behalf of all others similarly situated as set forth herein, alleges as follows: NATURE OF THE ACTION 1. This is a class action brought by gun owners against Defendant SIG SAUER, Inc. (“SIG” or “SIG SAUER”) for manufacturing, distributing, and selling SIG P320-brand semi- automatic pistols that, due to a defect, can inadvertently discharge a round of ammunition if dropped on the ground (a “drop fire”). SIG repeatedly misrepresented and warranted that the P320 pistols were “drop safe,” “won’t fire unless you want [them] to,” and are “originally manufactured free of defects in material, workmanship and mechanical function.” SIG’s original design and manufacture of the P320 pistol rendered the weapon unreasonably dangerous for its intended uses. 2. The P320 is a popular and commercially successful pistol. It is used by law enforcement agencies all over the country, and owned by hundreds of thousands of civilians. In Case 4:19-cv-00585 Document 1 Filed on 02/20/19 in TXSD Page 2 of 31 2016, the U.S. Army selected the SIG P320 to replace the M9 service pistol as the standard-issue sidearm of U.S. military servicemembers. -
Rimfire Firing-Pin Indent Copper Crusher (Part 1)
NONFERROUSNONFERROUS HEATHEAT TREATING TREATING Rimfire Firing-Pin Indent Copper Crusher (part 1) Daniel H. Herring – The HERRING GROUP, Inc.; Elmhurst, Ill. The Sporting Arms and Ammunition Manufacturers’ Institute Inc., also known as SAAMI, is an association of the nation’s leading manufacturers of rearms, ammunition and components. SAAMI is the American National Standards Institute-accredited standards Fig. 1. Firing-pin indent copper crushers developer for the commercial small arms and ammunition industry. SAAMI was for 22-caliber rimfire ammunition founded in 1926 at the request of the federal government and tasked with: creating and (courtesy of Cox Manufacturing and publishing industry standards for safety, interchangeability, reliability and quality; and Kirby & Associates) coordinating technical data to promote safe and responsible rearms use. he story of SAAMI’s rimfire firing-pin indent copper pressures and increased bullet velocities. crusher describes the reinvention of one of the most The primary advantage of rimfire ammunition is low cost, important tools in the ammunition and firearms industry typically one-fourth that of center fire. It is less expensive to T(Fig. 1). This article explains the purpose and operation manufacture a thin-walled casing with an integral-rimmed of the rimfire firing-pin indent copper crusher and how an primer than it is to seat a separate primer in the center of the unusual chain of events almost led to the disappearance of this head of the casing. simple but important technology. The most common rimfire ammunition is the 22LR (22-caliber long rif le). It is considered the most popular round Rimfire Ammunition in the world and is commonly used for target shooting, small- In order to discuss the rimfire copper crusher, we need to take a game hunting, competitive rifle shooting and, to a lesser extent, step back and first explain what rimfire ammunition is and how it works. -
Mmr™ Pro Semi-Auto Rifle
MMR ™ PRO SEMI-AUTO RIFLE 7 1 FEATURING THE NEW JERRY MICULEK JM PRO DROP-IN TRIGGER 0 2 | The new MMR Pro delivers the 3-Gun N O features shooters are looking for to gain I T I the competitive edge. T E ™ P MMR PRO M • Mossberg has designed the perfect AR for 3-Gun — 5.56MM NATO/223 REM O C an accurate performer with competition-proven features to ensure peak performance time-after-time. • Key Features: New JM Pro Drop-in Match Trigger; rifle-length direct-impingement gas system; free-floating 18” stainless steel barrel for superior accuracy; SilencerCo muzzlebrake with suppressor- ready ASR mount; 15” slim-profile forend with M-LOK ®; Magpul ® MOE +® grip/trigger guard; Raptor ambidextrous charging handle; and 6-Position stock with interchangeable FLEX ™ pad for length-of-pull flexibility. (See Comparison Chart on Page 2 for a full list of MMR specifications) Mossberg’s 15” slim-profile forend/hand guard uses the • The MMR Pro is chambered in 5.56mm NATO/ M-LOK modular mounting system; the full-length top rail 223 REM, and ships with a 30-Round Magpul accommodates a wide variety of accessories including iron PMAG magazine. sights, optics, etc . (Sights and accessories, not included) Designed in conjunction with 3-Gun Champion Jerry Miculek, A forward assist and ejection 6-Position stock provides 3.25” LOP With the AXTS Raptor™ An 18” AISI 416 Stainless Steel the new JM Pro Drop-In Match Trigger (4 lbs pull) provides a crisp, port dust cover are standard on adjustment by use of the integrated lever. -
GLOCK Pistol Inspection Form
GLOCK Pistol Inspection Form WARNING: NO LIVE AMMUNITION IN INSPECTION AREA; CHECK THAT PISTOLS AND MAGAZINES ARE UNLOADED AND CLEAR. Name: Model: Serial Number Date: INSPECTION OF ASSEMBLED PISTOL (Mark Pass/Fail) 1. External visual inspection ________ 5. Trigger reset check ________ 2. Trigger safety check ________ 6. Does empty magazine lock slide back ________ 3. Trigger pull ________ 7. Are component parts correct ________ 4. “Locking up” and “unlocking” ________ 8. Engagement ________ INSPECTION OF FIELD STRIPPED AND DETAILED STRIPPED PISTOL Component Pass Fail Component Pass Fail I. FIELD STRIPPED EXAM 5. Firing pin spring A. Barrel 6. Spacer sleeve 1. Barrel bulged 7. Firing pin channel liner 2. Cracks at muzzle or chamber C. Extractor depressor plunger assembly 3. Longitudinal cracks 1. Installed properly 4. Condition of lugs 2. Spring straight and undamaged B. Slide 3. Correct spring loaded bearing 1. Sights/Night Sights (inspection) D. Extractor 2. Front Sight pin/screw present 1. Upgrade present 3. Grooves (condition of) 2. Condition of extractor 4. Guide ring E. Firing pin safety 5. Cracks, especially under ejection port 1. Upgrade present 6. Slide “stop” lever notch 2. Firing pin safety spring in place 7. Brass deposits (excessive?) 3. Firing pin safety test 8. Extractor clearance (clean?) F. Locking block pin — upgrade C. Receiver G. Trigger pin 1. Magazine catch H. Locking block 2. Receiver cracks I. Trigger spring — installed correctly 3. Slide stop lever tension 1. With proper connector 4. Correct ejector J. Trigger with trigger bar 5. Condition of rails 1. Correct for the pistol 6. Slide lock (up & to the rear) 2.