SARAWAK ENERGY BERHAD

From: Distribution Procurement & Contract Division Distribution Department 93050

Our Ref.: PUR 17/16/AHA Date: 16 th May 2016

To: UPK Registered Tenderers Head VIIB, Class III or above Sub-Head 2b or above or Sub-Head 7b or above CIDB G3 or above, Category ME (E04 & E05) Menara Sarawak Energy, No. 1, The Isthmus, 93050 Kuching, Sarawak

Dear Sir/Madam,

TENDER FOR OVERHEAD LINES VEGETATION CLEARING AND SUBSTATION COMPOUND GRASS CUTTING IN SERIAN AND , WESTERN REGION TENDER REF.: PUR 17/16

You are cordially invited to tender for services listed in the attached schedule. Please refer to Tender Document for the instructions & conditions to tender. Tenders are to be submitted in sealed plain envelope marked:

1. “CONFIDENTIAL” – TENDER FOR OVERHEAD LINES VEGETATION CLEARING AND SUBSTATION COMPOUND GRASS CUTTING IN SERIAN AND SIBURAN, WESTERN REGION 2. Tender Ref. : PUR 17/16 3. Closing date and time : 29th June 2016 at 3.00 p.m. addressed to:

The Chief Executive Officer, Sarawak Energy Berhad, c/o The Officer-In-Charge, Tender Box, Level 1 (Ground Floor), North Wing No. 1, The Isthmus, Menara Sarawak Energy 93050 Kuching, Sarawak.

or hand-delivered to:

The Officer-In-Charge Tender Box, Level 1 (Ground Floor), North Wing No. 1, The Isthmus, Menara Sarawak Energy 93050 Kuching,Sarawak.

and to reach the Tender Box addressed above on or before : 29th June 2016 at 3.00 p.m.

Yours faithfully,

Leonora Liong Peh Ling for CHIEF EXECUTIVE OFFICER Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

INSTRUCTIONS TO PERSONS TENDERING

1. The Tenderer must be a registered Contractor with the following:-

a) UPK under Works Head VIIB, Class III or above under the following sub-heads; • 2b (for Overhead Lines works up to 33kV) or above or • 7b (for Vegetation Clearing works up to 33kV) or above

b) CIDB Grade G3 or above, Category ME (E04 & E05)

Tenderers are required to submit proof of UPK and CIDB registrations together with their tender submission.

2. This tender is for Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region.

This tender comprises the following different aspects of works includes vegetation clearing for 33kV, 11kV and LV OH lines including bracket type street lighting, vegetation clearing for 33kV tower foundations and access way to pole-mounted apparatus - e.g. switching (ABFI & ABI) poles, pole mounting cut-out poles, AR and platform transformer, etc., and to remove/dispose all debris to approved dumping ground(s).

The specifications for this tender cover the following areas:

Serian Areas

Zone 1 - Mile 24 Kuching - Serian Road up to and including Kakai Round about Kuching – Serian Old Road, all T-Offs and all side lanes road, all T-Offs and all side lanes. Monopole (Tower) lines from Mambong to Serian.

Zone 2 - Serian Town Proper, Serian By-Pass, all T-Offs and side lanes, Serian - Balai Ringin Road up to Samarahan - Boundary including all T-Offs, Gedong Road and all T-Offs.

Zone 3 - Serian - Road, Tebakang, Mongkos, Tebedu, Riih Daso, all T-Offs and side lanes.

Siburan Areas

Zone 1 - 12th Mile Pole No. 1 up to 24th Mile Pole No. 152, Kuching - Serian Road.

Zone 2 - Jalan Padawan, Jalan Mambong after Kpg Sikog start from Pole No.48 Kpg Sikog onward. Jalan Puncak Borneo start from Pole No. 1 Kpg Giam onward.

The above include all other areas defined under the respective station boundary and new RES / projects completed and commissioned during the Contract period.

A minimum of THREE (3) Group/Gang Leader holding relevant valid non-technical Competency certificate(s) issued by the Company, as required for the Contract.

"The Tenderer must tender for the whole work by filling GENUINE unit rates in the Schedule(s) of Rates and the Tenderer is not allowed to submit the unit rates in the Schedule of Rates which is considered as manipulative to the Company. The Company reserves the right to reject, any tender submission for any acts of fraud or considered as manipulative”.

2 PUR17/16/AHA

Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

3. The Tender must be made on the accompanying Form of Tender with all the blanks therein and all the Schedules of Rates duly filled in ink and signed . Tender rates must include all incidental and contingent expenses.

4. No alteration is to be made in the Form of Tender or in the Schedules thereto except in filling up the blanks as directed. Any amendments in filling up the blanks must be made with the Tenderer’s authorised signature/initial and the Tenderer’s Company stamp. If these instructions were not fully complied with, the tender shall be rejected.

5. Any erasures, alteration or correction to the Tender Documents shall be done in pen and initialled by the person authorized to sign the Tender. Correction using correction fluid/tape will be rejected.

6. The Tenderer, however is at liberty to add any further details that he may deem desirable and, in the event of his so doing, must print or type such details and annex the added matter to the tender submitted by him. Such additional details shall not be binding upon the Company unless they are approved by the Company and incorporated in the contract.

7. Incomplete tender submission will be rejected.

8. If the Tenderer has any doubt as to the meaning of any portion of the General Conditions or of the Specifications, he shall when submitting his tender, set out in his covering letter, the interpretation on which he relies.

9. The Tenderer is to submit with his tender in order of the relevant clauses, a statement of any departures from the Specifications.

10. The rates offered in the tender should be without consideration of the details/departures from the Specifications. If there is addition or deduction of the tender rates by virtue of the Company adopting those details/departures, then such additional/reduced sum should be stated in the annexed documents.

11. The Company will not be responsible for any expenses or losses, which may be incurred by any Tenderer in the preparation of his tender.

12. Bond/Securities

a) All Bonds, i.e. Tender Bond and/or Performance Bond shall be secured in Ringgit Malaysia for all International Tenderers and some Local Tenderers. The Bonds shall be furnished in any one of the following form and issued to the Company:-

i. Cash/Cheque; ii. Bank Draft issued by a bank licensed to operate in Malaysia/Cashier Order; iii. Bankers Guarantee must be unconditional and irrevocable and issued by a bank licensed to operate in Malaysia or in the case of a foreign Tenderer, bonded by a foreign bank;

b) In the case whereby, the Bonds are issued by a bank that is not licensed to operate in Malaysia, measures should be taken to ensure that the financial institution is reputable and credible. For example, a foreign bank with ‘AAA’ rating accredited by Moody’s Corporation would be an acceptable bank even though it is not licensed to operate in Malaysia. A list of Licensed Banking Institution in Malaysia can be found in Bank Negara Malaysia’s web portal.

3 PUR17/16/AHA

Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

c) All Bonds shall be submitted in the format provided by the Company and acceptable by a bank licensed to operate in Malaysia.

13. Tender Bond

a) For local tenders with estimated tender sum of above RM 2,000,000.00, the amount of Bid Bond/ Earnest Money, required to accompany the tender, shall be 2% of the tender sum subject to a maximum of RM 100,000.00 (Ringgit Malaysia One Hundred Thousand).

b) Any Tender offer not accompanied by a Tender Bond, if it is required, shall be rejected.

c) Tender Bond must be valid for a period of four (4) months from the date of the Tender closing.

d) Tender Bond shall be issued in accordance with the Company’s standard format (Form PUR/4) by a bank licensed to operate in Malaysia or such other format as approved by the Company.

e) Should it become necessary to extend the validity period of the Tender and the Tender Bond, the Company will request in writing to all those who submitted the Tenders for such extension before the expiry date thereof. Tenderers shall have the right to refuse to grant such extension without forfeiting their Tender Bond. The Tender Bond of Tenderers who refuses to grant the Company’s request for an extension of the validity of their respective Tender Bond will have the Tender Bond returned to them. However, they are deemed to have waived their right to further participate in the Tender.

f) Tender Bond submitted by the unsuccessful Tenderer shall be returned as promptly as possible upon the successful Tenderer being awarded with the contract and furnished the Performance Bond to the Company.

g) Tender Bond of the successful Tenderer shall be returned as promptly as possible upon the successful Tenderer furnished the Performance Bond to the Company and signed the Contract Documents. Failure of the successful Tenderer furnishing the Performance Bond to the Company and signed the Contract Documents within the specified period, the Company may immediately encash the Tender Bond.

14. Performance Bond

a) Performance Bond is required for all contracts exceeding RM 100,000.00 (Ringgit Malaysia One Hundred Thousand) and the amount of the Performance Bond to be obtained is as follows:

No. Value of Contracts Performance Bond a Above RM 100,000 to RM 500,000 2.5% of the Contract Sum b Above RM 500,000 to RM 1,000,000 5% of the Contract Sum c Above RM 1,000,000 10% of the Contract Sum

b) Performance Bond shall be valid for the whole duration of the Contract Period including Defect Liability/Maintenance Period, if any.

c) The successful Tenderers must furnish the Performance Bond within twenty-eight (28) days of receipt of the Notification of Award from the Company.

4 PUR17/16/AHA

Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

d) Failure of the successful Tenderers to submit the Performance Bond will constitute sufficient grounds for the annulment of the award of contract and forfeiture of the Tender Bond.

e) The Performance Bond will be returned to the Tenderer upon the Company satisfied that the Tenderer has completed the performance of the Contract. If the Tenderer fails to performance the Contract, the Company may without further notice and subject to any other rights under the Contract, encash the Performance Bond and the terminate the Contract with immediate effect.

15. Penalty For Non-Tally Online and Hard Copy Tender Submission Bid Values

Tenderer is required to submit the hard copy tender document before the tender closing date, as in the usual manner. Tenderer is also reminded to ensure that his online bid value and Form of Tender value are tallied . If these 2 values differ from one another, the tender submission will be disqualified.

Should the tenderer repeatedly submit hard copy tender submissions with Form of Tender values different from the corresponding online bid values, or does not submit the hard copy tender document at all after the on-line bidding was done, his tender submission will be disqualified and the following actions will be taken against him for the offences committed.

(a) First offence – a reminder letter will be given. (b) Second and third offences – a warning letter each will be given. (c) Three consecutive offences – the tenderer will be barred from taking part in the Company’s tenders for three consecutive months. (d) Any additional offence after the third offence – the tenderer will be barred from taking part in the Company’s tenders for three consecutive months for each offence committed

16. Modification and Withdrawal

Tenderer may not modify or withdraw its Tender Offer after the date of Tender closing. If the Tenderer withdraws or modifies his Tender Offer during the Tender validity period or after having been awarded the contract, the Company is entitled to:

a) Encash and forfeit the Tender Bond (if any) and

b) The Tenderer will be blacklisted and may not be eligible to participate in any tender or RFP issued by the Company as follow.

i. For a period of one (1) year for the first time. ii. For a period of three (3) years, for the second time. iii. De-registered and disqualified for the third time.

17. The validity period for the Tender shall not be less than four (4) months from the date of the Tender closing, during which period the Tenderer’s Tender Offer must remain fixed, valid, irrevocable and open for acceptance by the Company. Tenderers who submit Tender Offer with a shorter validity period may be and will run the risk of being rejected.

18. The Contract shall be for one-year period and can be renewed on annual basis up to a maximum of three years depending on the performance of the Contractor. However, please take note that the total tender sum (i.e. total contract value) shall also be used to determine the expiry of the Contract as provided under Clause 23 of the “General Conditions of Contract”. Should the Contract expire upon reaching the total contract value, the Contract can be renewed for another year up to a maximum of two (2) times depending on the performance of the Contractor. 5 PUR17/16/AHA

Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

19. Bumiputra Tenderers are required to submit certified copies of Trade Registrations showing the proportion of Bumiputra participation in the companies and the names of the directors of the companies.

20. The Tenderer should supply evidence to show the competence to undertake the works specified together with details of competent staff, which is to be provided by completing Schedule B . When the Tenderer intends to employ more competent staff, this should be separately mentioned in the Schedule B .

21. Tender Submission

a) All Tender offers must be addressed to the Company’s address as set out in the Tender Documents and to be deposited immediately in a Tender box at a respective location.

b) The Tenderer must prepared a written advice for the Company’s acknowledgement and filing. A copy of such written advice shall be retained by the Tenderer for filing. However, such written advice shall not imply that the Tenderer’s offer has been admitted for consideration.

c) The Tenderer must submit the original and a photocopy of the Tender Offer i.e. Technical Offer and Commercial Offer.

d) The submission of the Tender offer shall be done in separate sealed envelopes, duly marking each envelope as:

i. “TECHNICAL ” for envelopes containing technical and specifications related matters; and ii. “COMMERCIAL ” for envelopes containing commercial/quotation/prices and any financial related information

e) Both envelopes shall be placed in another envelope, sealed and marked “CONFIDENTIAL ” with “ Tender reference and title ” and “ date and time of the deadline for submission ” but shall bear no writing on the outside of the envelope which would enable the Tenderer to be identified. The warning “ Do not open before the closing date and time ” must also be marked at all the envelopes.

f) If all the envelopes are not sealed and marked as required, the Company will not be responsible for the misplacement or premature opening of the Tender offer. The Tender offer will be rejected if it is opened before the Tender opening date.

g) Tender received prior to the date and time of opening will be securely kept, unopened. Tender received after the closing date and time will be rejected. The Company bears no responsibilities for premature opening of Tenders not properly addressed or identified.

22. Prior to dropping in the Tender Box, the tender must be stamped by the Company’s representative with the date and time of submission.

23. Tenders received prior to the time of opening will be securely kept unopened. Tenders received after the time of opening will be rejected. The Company shall not be held responsible for premature opening of tenders not properly addressed or identified.

24. The Company does not bind itself to accept the lowest or any Tender, in part of in whole nor to assign any reason for the rejection of any Tender.

6 PUR17/16/AHA

Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

25. Tender Briefing

The relevant tenderers will be invited for tender briefing before submission of tender document on closing date. Only tenderers who attended the Tender Briefing shall be allowed to submit and bid their tender offer. The tenderer’s representative must the person named in the Company Registration (Form 24 and 49) or Company’s authorized personnel (through company’s authorization letter) shall be allowed to attend.

All Tenderers MUST bring along Original Copies or Certified true copy by company secretary (for verification) of Company Registration (Form 24 and 49) , Company UPKJ Bumiputera Status certificate, and Company official stamp during the Tender Briefing.

The Company will notify the relevant tenderers on the date and venue of the Tender Briefing.

26. The Tender or any Tenderer who has not conformed with the foregoing instructions may not be considered.

27. The official currency for this Contract shall be the Ringgit Malaysia (RM) and all rates and prices shall be quoted in this currency.

28. Should there be any discrepancies in the offer price in the Schedule of Rates and the Form of Tender, the offer price quoted in the Form of Tender shall prevail.

29. Except as required by the Laws, all Tender Documents and all information relating to the tender and the proposed contract which may have been disclosed to the Tenderer (whether they submit a Tender or not) shall be treated as confidential information and shall not be disclosed to any third party or published without the written consent of the Company.

30. Tenderers who require clarification of the tender document may contact the Company through:

Manager, Distribution Procurement & Contract Division, Sarawak Energy Berhad, 5th Floor, Menara Sarawak Energy, No. 1, The Isthmus, 93050 Kuching, Sarawak.

7 PUR17/16/AHA

Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

TENDER SPECIFICATIONS

1. Scope of Works

This contract is for the Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region.

The scope of works is generally listed as follows:

• Vegetation Clearing for 33kV, 11kV and LV OH lines including bracket type street lighting;

• Vegetation Clearing for 33kV tower foundations and access way to pole-mounted apparatus - e.g. switching (ABFI & ABI) poles, pole-mounting cut-out poles, AR and platform transformer, etc.;

• To remove/dispose all debris to approved dumping ground(s)

• Grass cutting at fenced-in substations

2. Coverage Areas under This Contract

The specifications for this tender cover the following areas:

Serian Areas

Zone 1 - Mile 24 Kuc/Ser Rd upto and including Kakai Round about, Kuc/Ser Old Road, all T-Off and all side lanes Road, all T-Off and all side lanes. Monopole(Tower) lines From Mambong to Serian.

Zone 2 - Serian Town Proper, Serian By-Pass, all T Offs and side lanes, Ser/Balai Ringin Road up to Samarahan-Sri Aman Boundary including all Toffs, Gedong Rd and all T-offs

Zone 3 - Serian/Tebedu Rd, Tebakang, Mongkos, Tebedu, Riih Daso, all T- off and side lanes.

Siburan Areas

Zone 1 - 12th Mile Pole No. 1 up to 24th Mile Pole No. 152, Kuching-Serian Road.

Zone 2 - Jalan Padawan, Jalan Mambong after Kpg Sikog start from Pole No.48 Kpg Sikog onward. Jalan Puncak Borneo start from Pole No. 1 Kpg Giam onward

The above include all other areas defined under the respective station boundary and new RES /projects completed and commissioned during the Contract period.

8 PUR17/16/AHA

Overhead Lines Vegetation Clearing and Substation Compound Grass Cutting in Serian and Siburan, Western Region

3. Categories of Substations

The substations are grouped into five categories according to space, area and nature of works to be carried out. They are:

a) 33kV & 11kV Ground-mounted Substation b) 33kV & 11kV Platform-mounted Substation c) 33kV & 11kV Pole Mounted Auto Re-closer and Voltage Regulator with Fencing d) 33kV & 11kV H-pole/pole mounted Substation e) Zone substations plus office compound and quarters compound

A ground-mounted substation may consist of more than one switchgear, transformer or pillar. Likewise it may also consist of only one transformer or switchgear only. In either case, the claim for payment is the same as a standard substation. The 11kV compact substation is considered as 11kV ground-mounted substation. Any new substations commissioned shall be categorized by the Authorized Engineer at the Regional Office.

4. Substation Grass Cutting

This refers to all the substations with fencing. The substations’ areas may vary in size and the contract rates quoted shall be deemed to include all the substations irrespective of the size. Typical dimensions of the fenced up substations are 15’ x 15’, 10’ x 10’, 14’ x 24’.

Appendix (A) indicates the cutting pattern for different location of Substation. The vegetation or grass in the fenced-in area must be fully killed or up-rooted and must be removed from site. Any tree branches or shrubs growing on top of the vicinity must be trimmed or cut. Debris or vegetation growing on top of the switchgear sheds must be removed.

The interval between each cutting must not exceed two (2) calendar months. Request(s) for grass cutting & vegetation clearing BEYOND the specified setback areas (as shown in Appendix “A”) for ground-mounted substations shall be paid separately.

For grass cutting & vegetation clearing outside the ground-mounted substation (or within the specified setback areas) weed killer is NOT allowed .

5. Mode of Instruction

Vegetation cutting shall be carried out according to schedule stated in instructions issued by Company’s Representative; the instruction shall be made vide Purchase Order. Scope of each Purchase Order shall contain sufficient pole-spans of HT lines or LT lines/HV aerial cables.

At any one time there may be up to five Purchase Orders issued to carry out vegetation clearing concurrently. The Contractor shall at all times provide the required number of workers, vehicles, tools and equipment to cut/trim the vegetation in accordance with work schedule.

9 PUR17/16/AHA