VOLUME 13 • ISSUE 1

JOBSITE BOOK

TOOLS, LADDERS, CLEANUP, STORAGE, LIGHTING, SCAFFOLDING, EQUIPMENT, & MUCH MORE!

SERVING THE CONSTRUCTION INDUSTRY SINCE 1968 Visit us at: www.farrellequipment.com Hand Tools FLOOR BROOMS BENCH BRUSH Bench Brush - LB608 Soft Bristle Broom A low cost, high quality wood Indoor brush. block brush for general cleaning. Sweeps fine dust and dirt.

LB0KIT40024 24” Broom with Handle & Brace SYNTHETIC CORN LB0KIT40036 36” Broom with Handle & Brace BROOMS Stiff Inside/Soft Outside Plastic Corn Broom - LB397 Bristle Broom Synthetic bristles. Excellent for heavy sweeping. Indoor/outdoor brush. Works well under wet conditions. Sweeps dust and dirt and heavy debris.

LB0KIT35624 24” Broom with Handle & Brace CORN BROOMS LB0KIT35636 36” Broom with Handle & Brace Corn Broom - LB880 • Indoor Brush. Stiff Bristle Broom • Sweeps dust and dirt.

Outdoors brush. Whisk Brush - LB885

Rough surfaces. • Indoor Brush.

For heavy debris. • Sweeps fine dust and dirt.

LB0KIT87024 24” Broom with Handle & Brace LB0KIT87036 36” Broom with Handle & Brace BARN BROOM 16" Orange Barn Broom - LB592 HANDLES & ACCESSORIES Built for use in rugged conditions and made to last. Will not absorb odors, Tapered handle 5' length mildew, rot or discolor. Will not absorb water and rinses clean. LB1760 Metal threaded handle 5' length LB2460 Spring threads for tapered handles SCRUB BRUSHES LB2000 10" Dual Surface Scrub Brush Metal broom brace LB689 LB812 Unique block design allows for a special two-position bristle trim which makes this an ideal SWEEPING cleaning tool. COMPOUND 12" Floor Scrub Brush For construction cleanup. Out performs Blue Polyester Fill - LB68712 oil based compounds. Environmentally safe wax base. Blue Crimped Polypropylene- Extra Stiff Acid Proof. FA050 50 LB Box Farrell Sweeping Compound FA100 100 LB Box Farrell Sweeping Compound 1-3/4" Trim length. 10" Soft Bristle Vehicle Wash Brush - LB1082 ACID BRUSHES Flagged Nylon Filling material is Utility and staple set in foam plastic block #70C Fender Brushes with protective bumper. #78 #39 A low cost, high quality block brushes for all general cleaning. Moisture WIRE BRUSH #68C and bacteria proof. Wire Brush with Scraper (#4SC) - LB1162 LB6338 Plastic Acid Brush with 8” Wood Handle (#68C) LB63320 Plastic Acid Brush with 20” Wood Handle (#70C) General purpose wire scratch brush LB63420 Fiber Acid Brush with 20” Wood Handle (#39) with scraper is manufactured to withstand LB63520 Tampico Acid Brush with 20” Poly Handle (#78) the tough uses of today's professional.

2 Hand Tools SHOVELS FIBERGLASS HANDLE SHOVELS

® EAGLE Series SRS700 Coated hardwood handle for strength. Open back, SRS700D tempered-steel blade.

SRS701 AS15545 Square Point Shovel AS15546 SRS701D 44" long wood handle AS15543 Round Point Shovel 44" long wood handle AS15544 AS15544 Square Point Shovel Structron Brand 700 Series shovels feature heat-treated, high 29" with “D” wood handle carbon polished steel for ultimate durability. PowerCore™solid AS15546 Round Point Shovel 29" with “D” wood handle AS15545 fiberglass reinforcing rod extends 12.5 inches from the handle into AS15543 the shank for maximum strength at this critical stress point. SRS700 Round Point 48" fiberglass long handle shovel Blue Max SRS700D Round Point 29" fiberglass handle with poly D grip Contractor Shovels SRS701 Square Point 48" fiberglass long handle shovel 48" long wood handle. Blade keeps SRS701D Square Point 29" fiberglass handle with poly D grip debris from sticking, prevents rust corrosion. Edge grind makes it easier to ASBMDLRS dig in harder soils. ASBMDLR FIBERGLASS HANDLE SHOVELS

ASBMDLR Round Point Blue Max Shovel Kraft Shovels ASBMDLRS Square Point Blue Max Shovel 48" Long Fiberglass Handle. 14 Gauge tempered steel blade for strength. Wood handle. Forward-turned step. AS15602 KRGG861F Square Point Kraft Shovel KRGG864F Round Point Kraft Shovel KRGG861F KRGG864F AS15606

AS15605 AS15602 Round Point 48" long handle FIBERGLASS HANDLE AS15605 Square Point 48" wood handle AS15606 Square Point 30" "D" handle SHOVELS

Razor-Back Contractor Shovels Razor-Back Contractor Shovels The supersocket shovel is designed

48" sturdy, stained handle for long life. to offer optimal prying leverage and AS2594400 AS2594500 Industrial gauge open-back blade. Rolled strength. Features a large power step step helps prevent material build-up. maximizing digging force, 48" durable AS44101 fiberglass handle and end cushion grip AS45520 for added comfort.

AS45520 Round Point Razor-Back Shovel AS44101 Square Point Razor-Back Shovel AS2594400 LHRP Razor-back Shovel AS2594500 SHRP Razor-back Shovel

ROLLING MAGNET DRAIN SPADE 30" Rolling Magnet - AKMSM Our most powerful push-type sweeper and has the advantage of a load release bar. Drain Spade - AS15609 14" drain spade with 29" wood/steel "D" handle. Magnet Width: 30" Forward-turned step. Overall Width: 36"

3 Hand Tools BOW RAKES FORM SCRAPERS Ideal for after work clean up. Scraper blades are firm but flexible. Comes with heavy-duty 5' shovel type wood handle. KRCC214 14" Scraper CC218 18" Scraper CC222 22" Scraper KRCC207 14" Replacement blade 16" Bow Rake with 16" Bow Rake with CC208 18" Replacement blade Wood Handle Fiberglass Handle CC209 22" Replacement blade AS18826 SRBR16 One-piece forged 14-tine One-piece forged 16-tine tempered-steel rake head. tempered-steel rake head. SCRAPER Professional grade. Professional grade. T-Handle Floor Scraper Floor scraper has 7" blade that shaves all FIBERGLASS kinds of floor coverings on any type of floor. All steel “T” handle is 54" long. Blades are EXTENSION HANDLE replaceable. KRGG393 7" Scraper KRGG394 7" Replacement blade SREX48 4' to 8' Fiberglass Extension Handle (#STR-SE48) SREX612 6' to 12' Fiberglass Extension Handle (#STR-SE612) SREX816 8' to 16' Fiberglass Extension Handle (#STR-SE816) SREX824 8' to 24' Fiberglass Extension Handle (#STR-SE824) SCRAPERS

ROOFER'S SPADE Form / Floor Scrapers Heavy duty floor scrapers. All steel Long Handle Kodiak construction. Perfect tool for floor Notched Roofer Spade preparation and form scraping. AS15755 The Kodiak Roof Shovel KRFC506 8" Floor Scraper with Adjustable Handle KRFC507 5 Pc. Pack 8" Replacement Blades for KRFC506 with fulcrum is great for KRFC520 Heavy Duty 5" Scraper with 15" Handle professionals who remove KRFC521 5 Pc. Pack 5" Replacement Blades for KRFC520 shingles and other roofing materials. CRACK SQUEEGEE

POST HOLE DIGGER Hinge allows you to switch J-250, Kodiak Dig EZ Post Hole squeegee to push or pull! Digger with Fiberglass Handles AS17151 KRGG814 V-Shaped Crack Squeegee w/ 54” Handle Innovative handle design with KRGG814-02 Replacement Blade for V-Shaped Squeegee shaped fiberglass handles.  Pointed, tempered blades for maximum soil penetration. 40% less handle travel distance. ASPHALT CRACK HOE No knuckle collision.

V-Shaped Asphalt Crack Hoe KRGG812 POST HOLE DIGGER V-shaped 2" x 4" head. Post Hole Digger with Wood Handles Cleans cracks before sealing, ASTPHD 5' handle is attached to head. One-piece high carbon steel blades. 48-inch North American hardwood handles. ASPHALT LUTE Useful tool for digging perfect Magnesium Asphalt Lute deep holes below the frost line. KRGG836 5.5-inch point spread. 36" Magnesium with 7' Handle asphalt lute has standard pointed teeth letting asphalt flow through.

4 Hand Tools

CONSTRUCTION HEAVY-DUTY HEAVY DUTY ACID SPRAYER SPRAYER SPRAYER SPRAYER

Chapin Sprayer CH1949-01 14 in. Heavy duty brass pump with 24" extension wand. The Industry Wide mouth Standard! opening for easy filling and cleaning. Flexible heavy 2 Gallon Industrial Acid Staining Sprayer. Farrell Concrete Sprayer duty hose with Concrete Sprayer no hose assembly required. CH2224 CH1949 CH2279 3-1/2 gallon capacity. 3.0 gallon capacity. ® Tri-Poxy coated. 36" heavy duty hose. 48" heavy-duty 300 psi Wide mouth for no mess 24" CURVED 48" flame resistant hose. filling & cleaning. BRASS WAND REPLACEMENT 24" Brass extension wand. Pressure relief gauge. HOSE

INSULATED HOSE NOZZLE

Heavy-duty brass valve and adjusting nut HSSN75 Hold open clip locks any spray pattern. SPRAYER SPRAYER Handles hot water up to 180° F.

INDUSTRIAL WATER/ GARDEN HOSE

5/8" x 50' Hose HS5001 All Rubber Heavy-Duty Hose with Brass Fittings. Also available in Plastic Sprayer CH20000 48oz. Industrial Viton 3/4" diameter and 25, 75, &100 1-Gallon funnel-top, Cleaner/Degreaser foot lengths. translucent tank for easy Sprayer. filling and cleaning. CH1046

HOSE WASHERS HOSE MENDER HAND SQUEEGEES

12" - KRGG242 18" - KRGG244 22" - KRGG246 Squeegee Trowels Steel Hose Mender 3/4" • Flexible blade is easy to control while Great for concrete providing optimum coverage. restoration, self- HSDM6 leveling material, HSTVW7 Garden Hose Washer 3/4" Not for compressible • Comfortable hand grip has a place for drywall material HSKRW25 Rubber Hose Washer 2" products such as air, threaded broom handle to extend reach. and more. HSKRW35 Rubber Hose Washer 3" nitrogen or steam. • Blade protector extends the life of the blade.

5 Hand Tools SAWHORSE STEEL HANDLE HAMMERS Adjustable Sawhorse MZTS-501 Framing Hammer • Legs have 7 variable height adjustments from 25" to 40". • Assembled and ready to use. • Legs fold into frame for compact easy carrying and storage. • Includes carrying handle. Straight Claw Curved Claw

CLAMPING TABLE ESE3-16C SH 16 oz. Curved Claw Hammer ESE3-16S SH 16 oz. Straight Claw Hammer SuperJaws Portable Clamping System ESE3-20C SH 20 oz. Curved Claw Hammer TRI-SJA200 ESE3-20S SH 20 oz. Straight Claw Hammer ESE3-22S SH 22 oz. Smooth Face Framing Hammer SuperJaws provides fast, hands-free ESE3-24S SH 24 oz. Smooth Face Straight Claw Framing Hammer clamping of material up to 37.5 in. ESE3-24BL 24 oz. Mason's Hammer (#E3-24BLC) Will hold anything from car parts ESE6-22T SH 22 oz. Smooth Face Hammertooth Hammer and bicycles to timber and tubing.

Folds down for easy TITANIUM FRAMER and compact transport! HAMMER Titanium 14 oz. Framer Hits like a 24 oz. steel hammer with 45% less VISE GRIPS weight and 10 times less recoil shock! Features: Shop Vise with Swivel Base • 14 oz. solid milled or smooth face titanium JET04-63302 head with 16" curved axe-style hickory • 360° swivel base with double handle. lockdown for quick and easy positioning. • Straight claw design. • Heavy-duty castings with a 30,000 PSI • Stiletto's signature magnetic nail starter. iron body built for rugged use STITI14MC 14 oz. Framing Hammer - Milled Face and extended life. STITI14SC 14 oz. Framing Hammer - Smooth Face STISTLHDL-C 18” Replacement Curved Hickory Handle Utility Vice with Swivel Base JET04-11128 • 180° swivel base with lockdown TITANIUM FINISH allows for quick and easy positioning. • Heavy-duty castings with a 30,000 PSI iron HAMMER body built for rugged use and extended life. Titanium 10 oz. Finish Hammer STFH10C Multi-Purpose Vice with Swivel Base A perfectly balanced, small, finish hammer. JET04-14500 Hits like a 16 oz. steel hammer with 45% less • 360° swivel base. weight and 10 times less recoil shock! • Jaw opening expands to Features: an 9-3/4" when reversed. • 10 oz. solid smooth face Titanium head. • When jaws are in normal position, • 14.5" curved axe-style Hickory handle. jaw width measures 5-1/2" wide • Straight claw design. Magnetic nail starter. with a 6" opening!

Tradesman Vise with Swivel Base HANDLE WRAP JET04-63200 • Wider jaws provide greater clamping! • Enclosed design keeps lubrication 8" AirGrip "Coldshrink" Handle Grip Wrap Tube in and contaminants out for smooth STIAG102 operation! Our innovative handle grip wrap. 2" x 8" pre-expanded rubber • Large anvil work surface. tube shrinks to fit any handle. Non-slip hand grip increases job safety and reduces hand fatigue at the end of the day.

6 Hand Tools TOOL BELT ROLLER FRAMES

9" Wire Ring Roller Frame DO1001 18" Roller Frame DO2001 17 Pocket - 4 Pc. Pro Framers Leather Tool Belt CLC01-21448 Top grain leather with a double tongue roller buckle belt, our easy-carry pouches, and 15 pockets and sleeves for your favorite nails and tools. PAINT TRAYS

18" Plastic Paint Pan TOOL BELT DO2002 Big roll-off area for 18" frames. One-gallon working capacity saves time. Edge holds brushes and tools. 16" Length x 21" Width x 4" Depth. 17 Pocket - 4 Pc. Carpenters 9" 1/2 Gal. Metal Paint Pan Tool Belt - CLC01-5608 DO1002 5" padded, double-tongue roller buckle belt, and 17 Rust-resistant bright finish steel. removable pockets and sleeves. Sturdy, ribbed roll-off area for even loading. Durable, welded legs keep the tray level. TOOL BELT Working Capacity: 1 Quart.

ROLLER COVERS 20 Pocket Pro Framers For latex or oil paints on smooth and semi smooth surfaces. Tool Belt with Yoke Suspenders CLC01-DG5617 DO1000 - 9" x 3/8" Nap 9 Main pockets with 20 smaller pockets and sleeves. DO2000 - 18" x 3/8" Nap Large, gusset-style pockets provide extra capacity. Zippered pocket to secure valuables, plus carabiner. PURE BRISTLE BRUSHES TOOL BELT Our lowest priced line is suitable for applying fiberglass epoxies, paint removers, and general industrial uses. DO2372 - 2" Brush 16 Pocket Deluxe DO2371 - 3" Brush Carpenters Tool Belt DO2440 - 4" Brush CLC01-DG5640 9 main pockets with 7 smaller pockets and sleeves. Large, gusset-style pockets provide extra capacity. POWER MIXER Pouch handle allows for simple belt adjustments and easy one-hand carrying. Professional Hand-Held Power Mixer COL-X01 APPLICATOR Optimum performance and perfect ergonomics. BRUSH Easy to operate with a straight back and ergonomically shaped grip handles. State-of- Pro-Stain 10” Flagged the-art motor and gear unit components for long tip applicator brush. service and safety while working. 0 - 650 rpm. PRO95-BROOM-FT-10 We carry a wide CEMENT COATER BRUSH Best Grade White variety of mixers! Tampico - LB561 6-3/4" red handle attached. Block size: 6-1/2" L x 2" W. Length of Trim: 4".

7 Hand Tools SLEDGE HAMMERS PINCH POINT BAR WILTON® Unbreakable Ames 60" Pinch Point Crow Bar Handle Sledge Hammers AS11601 • Unbreakable handle is made with tempered steel, and surrounded by heavy-duty The #18 pinch point crow bar is a 60-inch long steel bar. This molded rubber. long hand tool is utilized to pry and lever heavy objects such • Ergonomic handle absorbs shock as breaking up clay, concrete, and other hard materials. and has a slip-resistant grip. JET02-20416 4 Lb. BASH Sledge Hammer w/ 16” Unbreakable Handle DIGGING BAR JET02-20624 6 Lb. BASH Sledge Hammer w/ 24” Unbreakable Handle JET02-20636 6 Lb. BASH Sledge Hammer w/ 36” Unbreakable Hammer 17 Lb. Digging Bar with 69" Handle JET02-20824 8 Lb. BASH Sledge Hammer w/ 24” Unbreakable Handle AS11600 JET02-20836 8 Lb. BASH Sledge Hammer w/ 36” Unbreakable Hammer JET02-21036 10 Lb. BASH Sledge Hammer w/ 36” Unbreakable Hammer JET02-21236 12 Lb. BASH Sledge Hammer w/ 36” Unbreakable Hammer Used for digging and prying of dirt and large rocks and tamping soil. SLEDGE HAMMERS Drop forged high carbon steel heads, heat treated with hardwood hickory or CROW BAR fiberglass handles. AS11063 3# Fiberglass 16" Sledge Hammer AS11070 4# Wood 16" Sledge Hammer AS11072 4# Fiberglass 16" Sledge Hammer AS11082 6# Wood Handle Sledge Hammer 55-1/2” Grizzly Crow Bar AS11085 6# Fiberglass Handle Sledge Hammer AS11600 AS11099 8# Sledge Hammer w/ Wood Handle A heavy, strong, multi-purpose tool that AS11101 8# Sledge Hammer w/ Fiberglass Handle saves time and effort on the job. Its 3" AS11203 10# Sledge Hammer w/ Wood Handle AS11204 10# Fiberglass Handle Sledge Hammer width protects concrete when stripping AS11219 12# Sledge Hammer w/ Wood Handle forms. Its efficient blade provides high AS11220 12# Fiberglass Handle Sledge Hammer leverage as a crow bar and nail and spike AS11234 16# Wood Handle Sledge Hammer puller. Blade is hardened alloy with keyhole AS3111000 4 Lb. RAZOR-BACK w/Fiberglass Handle nail-pulling slot in center and V-notch in a tapered edge. AS3116000 12 Lb. RAZOR-BACK w/Fiberglass Handle Replacement Handles American hickory (supplied with wood PRY BARS & metal wedges where applicable) Heavy Duty 11401 36" Hickory Handle For 6-16 lb. Sledges Little John Pry Bar 11407 36" Hickory Handle For 20 lb. Sledges 62-314 14" Hickory Handle For 16 oz. Nail Hammer Ideal all purpose tool for prying forms and other construction jobs. Specially designed 3" wide blade angle and hardened steel claw.

WRECKING BARS KRGG631 46” Heavy Duty Little John Pry Bar KRGG630 56” Heavy Duty Big John Pry Bar

This Gooseneck Wrecking Bar is made of quality 3/4" bar stock. It also has a single curved end PICKAXE and flattened points with a small slot on both ends for removing nails. 6LB. Pick Head - AS11387 Size 6 eye. Best for digging ditches. AS11716 36” Gooseneck Wrecking Bar AS11730 48” Gooseneck Wrecking Bar 36" Handle - AS11436 Fits use for a 5 to 9 pound clay pick head. No epoxy or wood wedges are needed to WRECKING attach clay pick to handle. BARS This bar has a push/pull action making even NAIL PULLER the toughest job simple. 7/8" hex shank. 12" Titanium Clawbar MZTW36WB 36" Wrecking Bar Nail Puller - STITICLW12 MZTW48WB 48" Wrecking Bar Solid titanium framing nail puller with a dimpler feature.

8 Hand Tools

LITTLE GIANT MEASURING CHALK LINE REEL TAPES Doesn't stretch like nylon, and doesn't rust like steel! Little Giant Chalk Line - KSG100 Long 100 ft heavy duty cord and pull ring. NR - Nylon-Reinforced Steel Blade Hooks easily to a utility belt and holds almost Tough, double nylon-coated steel. 1 lb. of chalk. One-piece steel crank for Break-resistant under severe use in the extra long life. 15 oz. capacity. field. 3/8-inch wide blade reduces wind drift and tape weight. Metal-reinforced GIANT CHALK crank handle for durability. LINE REEL Model Length Units. Zero Pt. Attachment NR18100 100 ft. ft., in.,1/8 Hook end Hook NR10100 100 ft. ft., 1/10, 1/100 Tape end + 1 ft. Ring NR10100E 100 ft. ft., 1/10, 1/100 Tape end Ring ® Proline Giant Chalk Line Reel NR10100H 100 ft. ft., 1/10, 1/100 Hook end Hook KSG130 NR10200H 200 ft. ft., 1/10, 1/100 Hook end Hook Extra long 130 ft. heavy duty cord and pull ring. NR18200 200 ft. ft., in.,1/8 Hook end Hook Holds 1 lb. of chalk for less refills. MEASURING TAPES HIGH SPEED CHALK Doesn't stretch like nylon, and doesn't rust like steel! LINE REEL SNR - Steel Housing, Proline® High Speed Nylon-Reinforced Steel Blade Chalk Line - KSG130 The world’s best steel long tape in a housing 100' polyester line rewinds 3-1/2 times faster. Quick fill rubber that’s built to last! grommet. Free wheeling disengage gear for ease of use. Features: • Stainless steel housing. • Tough, double nylon-coated steel blade assures long life under field abuse. MARKING CHALK • Rubber-grip shovel handle for comfortable, ProChalk & Glo Marking Chalks rapid reeling. Ultra-Fine chalk is formulated to • Metal-reinforced crank handle for durability. achieve a perfect line every time. Model Length Units. Zero Pt. Attachment Brilliant color tones provide strong, SNR10200 200 ft. ft., 1/10, 1/100 Tape end + 1 ft Ring sharp lines. From the brightest SNR10200H 200 ft. ft., 1/10, 1/100 Hook end Hook pigments in the industry, we produce SNR18300 300 ft. ft., in., 1/8 Hook end Hook standard colors plus our unique, SNR10300 300 ft. ft., 1/10, 1/100 Tape end + 1 ft Ring fluorescent “Glo-Orange” for SNR10300E 300 ft. ft., 1/10, 1/100 Tape end Ring improved visibility. SNR10300H 300 ft. ft., 1/10, 1/100 Hook end Hook

KS8B 8 oz Blue KS105B 5 LB Blue KS8GO 8 oz Glo-Orange KS105GO 5 LB Glo-Orange MEASURING TAPE KS8R 8 oz Red KS105R 5 LB Red Chalk KS105W 5 LB White Doesn't stretch like nylon, and doesn't rust like steel! 300’ - Inches Steel Tape MEASURING TAPES with Nylon Coating Extra Wide Tape Rule KSNRS18300 Extra wide blade. Magnetic hook. Nylon-reinforced steel blade, speed rewind. True zero hook. Positive locking 3 x 1 rewind, high-visibility housing! button. Chrome plated case. Metal, planetary gearing for super-fast rewind. KSPG1025 25' ft., 1/10, 1/100 KSPG181025 25' ft., in., 1/8, 1/16 & ft., 1/10, 1/100 KSPG1825 25' ft., in., 1/8, 1/16 MEASURING TAPE

100’ - Inches MEASURING Steel Tape Measure - KSST181003X 3 to 1 gearing for quick rewinding. TAPE High-impact-resistant case with a full rubber, non-slip grip. Folding steel hook 25' Tape Measure - KSPG25FAR for a great hold on measuring Features sturdy construction and rubber grip. surfaces. Closed housing.

9 Hand Tools

Hand Tools Designed for Professionals!

7/8" x 30" Connecting Bar Broad Head Bull Pin KL3248 Erection Wrench  Large striking surface. Provides extra for Heavy Duty Nut  13-3/4 in. pin length. leverage when positioning steel Select alloy steel. Metal Wire Reel 1-1/4" KL3255 members and Extra heavy-duty head. aligning bolt holes. KL27400 1-1/16" KL3256 3/4" HD. Nut KL3212 Feeds pre-coiled wire 7/8" HD. Nut KL3213 smoothly, easily, and quickly. 3/4" Reg. Nut KR3222 Handles all types of tie-wire. Hammer Holder KL5706 Drift Pin  Tough, forged steel, heat treated for strength. 13/16" KL3261 1/2" Drive Ratcheting 15/16" KL3262 1/4" X 10" Flat Head 2" Heavy-Duty Construction Wrench Screw Driver Tie-Wire Belt KL3238 KL605-10 Accepts 1/2 in. square- Features a reel connection  Narrow cabinet tip permits drive hex socket. strap. blade access where space 32"-40" KL5420S is limited. 40"-48" KL5420L

16" Adjustable Head Construction Wrench KL3239 Select alloy steel. Allen Wrench Set KL70570 - INCHES Max Capacity 1-1/2".  3/16'' (5 mm), 7/32'' (6 mm), 1/4'' (6 mm), Wrench Holder 5/16'' (8 mm) and 3/8'' KL5118PRS (10 mm) Two slot for erection Canvas Bull Pin/Bolt wrenches or adjustable Bag - KL5416T construction wrench.  5" x 9" x 10".

Electrode Bag KL5471 Tool Holder KL5118PRS 2-1/2" diameter. Allen Wrench Set Resists high heat. 3 pockets for pliers Leather Drift/Bull Pin KL70580 - METRIC folding rule and Holder - KL5417T  3 mm, 4 mm, 5 mm, screwdriver.  3-1/4" x 12-1/4". 6 mm, 8 mm, 10 mm.

10 Hand Tools VISE GRIP PLIERS Straight Jaw Locking Pliers • Straight jaws provide maximum contact on flat, 9" Side Cutting Pliers square, or hex work. 9" Ironworkers Pliers KLD213-09NE IRW-302L3 7R 7” Locking Pliers KLD2000-07CST  Durable and reliable 9-inch IRW-102L3 10R 10” Locking Pliers  Twists and cuts soft side cutting pliers.  High-leverage design. annealed rebar tie wire, Long Nose Locking Pliers bolts, and nails. • Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter.

IRW-1402L3 6LN 6" / 150 mm Locking Pliers IRW-1502L3 9LN 9" / 225 mm Locking Pliers

8" Diagonal Cut Pliers 9" Ironworkers Pliers - Curved Jaw Locking Pliers KLD2000-28 High Leverage • Curved jaw with built-in wire cutter  Cuts ACSR, screws, nails KLD213-09ST great for a variety of applications and most hardened wire. and material shapes.  Cuts ACSR, screws, nails  High leverage, heavy duty. and most hardened wire. • Classic trigger release provides maximum locking force.  Handform handles for full gripping and cutting power. • Convenient wire cutter included. IRW-702L3 7WR 7” Locking Pliers IRW-502L3 10WR 10” Locking Pliers

DRILL BIT SETS 9" Rebar Work Pliers KLD2000-9ST 29 Piece Drill Bit Set 9" High-Leverage NM44150  Cuts ACSR, screws, nails Type 190 Jobber Length and most hardened Diagonal Pliers KLD248-9ST 135° Split Point. (1/16” through wire. Twists and cuts soft 1/2” by 64ths) annealed rebar tie wire.  Angled-head design eases work in confined spaces.  Cuts hardened wire, screws 29 Pc. Drill Bit Set and nails. NM44190 Black/Gold Type 190-AG Blaze Orange Case

29 Pc. Drill Bit Set Black NM66820 Gold Type 175-AG (3 Flats On Shank) Straight-Hand Seamer KL86553 29 Pc. Cryo / Nitride Red  Easily and accurately Ultra Dex Set bends, seams and flattens NM47462 5 Blade Crimper • Drill sizes: 1/16", 1/2" by 64ths sheet metal and non- KL70580 - METRIC • Exceptional corrosion resistance ferrous metals.  Make indentations in stove and heat!  Crimps 24 ga. CSRM and pipe and round ducts. 28 ga. SSSM.  Crimps 24 ga. CSRM and MANY MORE SIZES  Jaw marked in 1/4'' 28 ga. SSSM. AND STYLES IN STOCK! (6 mm) increments.  All steel construction.

11 Jobsite Supply

BOLT CUTTERS STRAPPING KIT JET® Bolt Cutters incorporate high- carbon alloy tool steel jaws for cutting concrete-reinforcing rods, medium tensile and soft bolts, rods, rivets, bars and chains. JET03-587818 18" Bolt Cutter EZ Strapping Starter Kit JET03-587824 24" Bolt Cutter Ideal for contractors, foremen, JET03-587830 30" Bolt Cutter yard workers, truck drivers or just about anyone who needs to bundle heavy items. The kit contains 250 feet of ¾ in. 2900 lb. break strength strap, a bag heavy duty buckles, a ratchet tool GEAR BAG and instructions. 24" Pro Contractors Gear KUBEZKIT EZ Safety Strapping Kit Bag - CLC04-DG5511 KUB270034250 3/4” x 250’ Coil 2,950 Lb. Strapping • 4 exterior pockets Include KUB19MM-06-DRK 100 Pc. Box Phosphate Coated Buckles 3 flap-covered pockets KUB2040-34 3/4” x 1650’ Coil 2,950 Lb. Strapping plus one drawstring pocket to keep small parts from spilling out. STEEL BANDING • Extra-large interior. TOOLS & SUPPLIES • Heavy-duty poly construction.

Steel Banding HITCHES & ACCESSORIES CARSTRAPMIP1300

Band Clamps CARSTRAPDO-5 RIG17-B 2" Chrome Ball with 1" Shank CARSTRAPMIP1100-12 RIGUB-208-B Utility Hitch with 2" Drop & 1" Hole (Fits 2" x 2" Receiver) RIGHP1020-10 Hitch Pin & Clip RIGRM5P Receiver Mounted Pintle Hitch CARSTRAPDO-5 Portable Strapping Cart (MIP5200) CARSTRAPMIP1100-12 1/2" Steel Crimper CARSTRAPMIP1100-34 3/4" Steel Crimper CARSTRAPMIP1300 3/8" to 3/4" Steel Tensioner CORROSION PROTECTION CARSTRAP12X020-SD 1/2" x .020 Roll Steel Banding (110 lb. Roll) Fluid Film CARSTRAP34X020-CC 3/4" x .020 Roll Steel Banding (Approx. 1960 LF) CARSTRAPSC3-34 3/4" x 300' Box Steel Banding Provides corrosion control, penetra- CARSTRAPOP-12-1M 1,000 Pc Box 1/2" Band Clamps tion, metal wetting and water dis- CARSTRAPOP-34-5M 5,000 Pc. Box 3/4" Band Clamps placement. Heavily corroded and/or frozen parts can be salvaged.

FLU00107 2.25 oz. Spray Can STRAP CADDY Complete: FLU00207 11.75 oz. Spray Can A complete portable FLU12207 1 Gal. Can Ready-To-Use! FLU12208 5 Gal. Pail steel strap system. Ready-to-use with steel strap, tools, seals and carry-all dispenser. FIRE EXTINGUISHERS Includes: Strap caddy, 5 Lb. ABC Fire Extinguisher tensioner, sealer, cutter, (For Trucks) - FEXAMX-B402 2-300' coils of 3/4" steel strap and a box of 10 Lb. ABC Fire Extinguisher FEXAMX-B456 100 seals. Providing performance quality CARSTRAPSCFK34WT Strap Caddy Complete Kit in your time of need. CARSTRAPSC3-34 Additional 3/4" x 300' Box Steel Banding CARSTRAPOP34-100 Additional 100 Pc. Box 3/4" Seals SPILL KIT CABLE TIES 5 Gallon Spill Kit - OUT-942-0060 A convenient kit to keep your project Multi-Purpose. Made of nylon. compliant. For hydraulic oil, fuel and radiator spills. It is compact and AM804MS0050 8" length - 100 count conveniently stores behind, or under, the AM804MS0070 11" length - 100 count seat of your truck. AM804MS0108 15" length - 100 count

12 Jobsite Supply

POLYESTER SLINGS ROUND SLINGS

Additional Lengths Additional Lengths Available! Available! Endless-Type Roundslings The most basic roundsling, yet they offer great versatility. Endless roundslings may be used in a vertical, chocker or Polyester Web Slings basket type hitch. Easier Handling: Weighs 85% less than equivalent wire rope or chain sling. Better Grip: Wider bearing surface LA506 6’ Round Sling Green (SR-2X06) on load and easily takes contour of material being lifted. LA508 8’ Round Sling Green (SR-2X08) Low Stretch Factor: Polyester slings have lower elongation LA510 10’ Round Sling Green (SR-2X10) characteristics than nylon slings (depending on sling type, LA512 12’ Round Sling Green (SR-2X12) age and use). Good Chemical Resistance. Water resistant.

BINDERS

Tiedown Chain Binders Load Binders LA104 1” x 4’ Polyester Sling (EE1-901X04) PN91010 PNLDR-38 LA106 1” x 6’ Polyester Sling (EE1-901X06) Grab hook at each end. Grab hook at each end. LA204 2” x 4’ Polyester Sling (EE1-902X04) 5/16 - 3/8" Lever Style. 5/16 - 3/8" Ratchet Style. LA206 2” x 6’ Polyester Sling (EE1-902X06) LA208 2” x 8’ Polyester Sling (EE1-902X08) LA210 2” x 10’ Polyester Sling (EE1-902X10) RACK STRAP Rack Strap (Pair) LA212 2” x 12’ Polyester Sling (EE1-902X12) RSR-S1C2 LA216 2” x 16’ Polyester Sling (EE1-902X16) The most LA220 2” x 20’ Polyester Sling (EE1-902X20) advanced LA408 4” x 8’ Polyester Sling (EE1-904X08) patented tie down system LA410 4” x 10’ Polyester Sling (EE1-904X10) available! LA412 4” x 12’ Polyester Sling (EE1-904X12) Tie down: lumber, LA420 4” x 20’ Polyester Sling (EE1-904X20) pipe, ladders and most materials. Warnings: Use of all synthetic slings should be in accordance with regulations and standards for sling use issued by both the Occupational Safety and Health Administration, which can be found at www.osha.gov (search: slings), and the American Society of Mechanical Engineers. Always consult manufacturer’s literature for rated capacities. RATCHET STRAP ASSEMBLIES RATCHET STYLE Load Hugger - LA60106 LOAD HUGGERS 1" x 10' with wire hooks. 3000 lbs. 2" x 27'. 10,000 lb. capacity

DRBRS-2-27-LW-FH With Flat End Your choice of flat or wire DRBRS-2-27-W-WH With Wire Hook hook ends PALLET JACK 27" x 48" Pallet Truck JE140075 PALLET PULLER • Capacity: 6,000 pounds. • Turning Radius: 200 degrees. Jet Pallet Puller - PAPL-1 • Overload protection ball valve Designed to lend a hand in pulling heavy prevents lifting loads past pallets at ground level across a smooth floor. maximum capacity. Dimensions: • Top-stroke release valve L x W (in.): 21-3/4" x 12-3/16" prevents cylinder extension Jaw Height (in.): 8-1/4" beyond maximum height. Jaw Opening (in.): 6-1/2" • Chrome-plated pump piston Jaw Width (in.): 6-1/2" and ram provide corrosion resistance in any industrial Carbon steel teeth! environment.

13 Jobsite Supply

HAND TRUCK CABLE HOISTS Hand Truck with 10" Solid Puncture Proof Tires - MCA47107 Designed for reliability, durability and versatility. • 8-Inch puncture proof tires with steel Get a grip on Little Mule’s Cable Hoists. Recent hub never go flat. refinements in design and construction make • 600-Pound load capacity. this the best portable cable hoist in the market. • Wheel guards protect the load from A great investment in lasting and dependable the tires. service plus value. • Wheel gussets give truck extra strength and durability. YL100A Cable Hoist 29-14 FT 1/2 to 1 Ton • Easily converts from 2 wheel vertical YL404WN Cable Hoist 20 Ft. @ 2000 Lb. or 10 Ft. @ 4000 Lb. truck to 4 wheel platform position. • 8-Inch puncture proof tires with steel hub never go flat. LEVER HOISTS

Rated the number 1 selling lever hoist in the U.S.! APPLIANCE TRUCK Harrington's LB lever hoists combine easy operation with a compact, low headroom design Appliance Truck with Manual that easily handles tough demands. Can be used Belt Tightener - MCA40710 horizontally, vertically, inverted or at any other • Ratchet belt tightened helps secure large load angle. appliances. • Capacities 3/4 Ton through 9 Ton. • Duo Durometer protective pads to protect • Compact design makes it a perfect fit for the load. use in tight quarters. • 800-Pound load capacity. • Steel body is more durable yet lighter in • Automotive seat belt used for strength. weight than die cast aluminum models. • Non-marking wheels. • Revolutionary freewheeling offers one handed operation. • 360 degree handle rotation and pivot & DRUM CRADLE swivel top hook for easy rigging. 55 Gal. Drum Cradle - MCA40158 • Simplifies storage, loading, unloading HAR-CF005-10 1/2 Ton w/10 Ft. Lift and on the job dispensing of 55 gallon HAR-CF005-20 1/2 Ton w/20 Ft. Lift steel drums. HAR-CF010-10 1 Ton w/10 Ft. Lift • 600-Pound load capacity. HAR-CF010-20 1 Ton w/20 Ft. Lift • Non-sparking oil and chemical-resistant wheels mounted on inside of frame. CHAIN HOISTS DOT CHAIN WITH • Designed with fewer parts to simplify maintenance. GRAB HOOKS • Rugged die-cast aluminum body provides Grade 70 Transport exceptional strength. Transport Tow & Binder Chains with • Pre-lubricated sealed ball bearings for long life and low maintenance. Clevis Hooks. Never exceed working load limit. Not for overhead lifting. HAR-L5LB008-10 3/4 Ton w/ 10 Ft. Lift HAR-L5LB008-20 3/4 Ton w/ 20 Ft. Lift PN8000 5/16” X 20’ Gold DOT Chain with Grab Hooks HAR-L5LB015-10 1-1/2 Ton w/ 10 Ft. Lift PN8100 3/8” X 20’ Gold DOT Chain with Grab Hooks HAR-L5LB015-20 1-1/2 Ton w/ 20 Ft. Lift

PN01404 5/16" Clevis w/ Screw Pin WIRE ROPE SLINGS CHAIN PN01405 3/8" Clevis w/ Screw Pin PN01406 7/16" Clevis w/ Screw Pin ACCESSORIES PN01407 1/2" Clevis w/ Screw Pin PN01408 5/8 " Clevis w/ Screw Pin PN01409 3/4" Clevis w/ Screw Pin PN01410 7/8" Clevis w/ Screw Pin PN01411 1" Clevis w/ Screw Pin PN31403 1/4" Grade 70 Clevis Grab Hook Rugged and reliable, the flemish eye spliced with carbon PN31404 5/16" Grade 70 Clevis Grab Hook steel sleeve of­fers the great­est safety in a wire rope choker. PN31405 3/8" Grade 70 Clevis Grab Hook This construction offers 100% wire rope efficiency. PN35403 1/4" Grade 70 Clevis Slip Hook PN35404 5/16" Grade 70 Clevis Slip Hook LAIWRC12 1/2” x 6’ Wire Rope Sling (W.500X06SW1) PN35405 3/8" Grade 70 Clevis Slip Hook LAIWRC38 3/8” x 6’ Wire Rope Sling (W.375X06SW1)

14 Jobsite Supply

MASKING TAPE COLORED ELECTRICAL TAPE 1” General Purpose Masking Tape - 3M01-58036 A 7 mil colored vinyl tape. General purpose masking tape for light U.L. approved. duty bundling, attaching, and labeling. Used primarily for color coding electrical wiring. 3/4" x 66'. PAINTERS TAPE

Scotch-Blue™ Painters Tape Assured Equipment Grounding Color Coding Scheme 2090 for Multi-Surfaces This tape removes cleanly without January, February & March July, August & September adhesive transfer or surface damage for up to 14 days, even in direct sunlight. It is a April, May, June October, November & December medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal.

3M01-03681 1” x 60 yd. Blue Painters Tape UT34-W 66 White Tape UT34-R 66 Red Tape 3M01-03683 2” x 60 yd. Blue Painters Tape UT34-GR 66 Green Tape UT34-OR 66 Orange Tape

PRE-TAPED DROP CLOTH ELECTRICAL TAPE Roll Pre-Taped Film & Dispenser 3M01-12071 3/4” x 60’ #1700 Black 24-inch-by-30-yard scotch pre-taped Electrical Tape - 3M01-69764 plastic drop cloth is a convenient, pre- 3M™ Temflex™ General Use Vinyl taped plastic film that unfolds to cover Electrical Tape 1700 is used for and protect a variety of surfaces. This protective jacketing and harnessing. specially treated film clings to surfaces Flame retardant, abrasive- and cold- and is easy to clean-up. This drop cloth resistant. UL Listed and CSA Certified is preloaded into an included dispenser for 176°F. along with 3M long-mask masking tape 2090, which is sunlight stable and gives you up to a 7-day clean removal. FILAMENT TAPE

DUCT TAPE 1” x 60 Yd. Roll 2” Utility Duct Tape #2929 Tartan™ Filament Tape 3M01-24883 3M01-86520 Resists moisture to prolong General purpose strapping tape its bond. Ideal for temporary designed for light-duty strapping repairs, sealing, holding and applications such as reinforcing boxes marking. Polyethylene with and bundling light items. rubber adhesive. Performs in temperatures up to 200°F. TARPS Extra Heavy Duty Vinyl Tarp With Grommets and Hemmed Edges. APMT1015 10 x 15 foot POLY REPAIR TAPE APMT1216 12 x 16 foot 2" X 108' Poly Repair Tape APMT1220 12 x 20 foot UT82702 APMT1620 16 x 20 foot Great for seaming Plastic Film. APMT2020 20 x 20 foot Excellent for splicing polyethylene sheeting and weather stripping More Sizes Available! Give us a call! windows and doors. 2" x 36 yards. TARP STRAPS Features tear drop ends with 2-1/2" S-Hooks pre-inserted. They will BOX TAPE meet the requirements of even the 2” x 60 yd. Scotch® Clear Box most demanding tie-down user. Sealing Tape - 3M01-13679 Conforms around edges and over MU14979-15 15" Tarp Straps MU14979-31 31" Tarp Straps rough surfaces for a tight seal. MU14979-21 21" Tarp Straps MU14979-41 41" Tarp Straps

15 Jobsite Supply

DISPOSABLE COVERALLS SHOE COVERS Cloth-like fabric that is easy and Shoe Covers Box 10 of Pair comfortable to wear. Especially SURSC3001PB suited for non-toxic liquid and • Protect floors from dirt, spray hazards. Provides a true scuffs and heel marks. aerosol and liquid proof barrier. • Surface Shields offers shoe All garments feature serged JAC06-44344 Size XL covers for any type of seams and a zipper front. JAC06-44345 Size XXL jobsite.

ADHESIVE FLOOR DUST BARRIER MATS Protects your jobsite 24” x 36” Adhesive Floor Mat- 30 Sheet Mat from dust! FILFTM24X36BLUE Versatile, easy-to-use, and A polyethylene film mat with a cost efficient. Telescopic, tacky surface to remove dust twist-lock ZipWall Poles and dirt from footwear. This unique product features a topped with the patented sturdy, reusable platform constructed of rigid polystyrene. spring-loaded ZipWall Jack enables you to screen off your work area with plastic CARPET sheeting, light canvas, or PROTECTION drop cloth. FILM 36” x 200’ Clear Carpet WALAZ2 7’ (2 per Pack) Protection Film - FILFTC36X200S WALSLP6 Zipwall 12 Ft. Spring Loaded Pole Non-slip surface is a special blend of polyethylene which is highly resistant to tears or punctures. Ideal during remodeling, painting and moving, it minimizes clean-up time POLY and damage claims.

TEMPORARY FLOORING PROTECTION Plastic Sheeting • Insulation 38" X 100' Construction Board Floor Thousands of uses! • Paint Protection Protection - FILFTRB38X100 • Equipment Cover • Moisture Barrier For floors and other surfaces acts as a protective • Vapor Barrier layer to prevent costly mistakes happening on-site. This product protects wood, tile, concrete, colored 042002 2 Mil - 4'2" x 200' 201006 6 Mil - 20' x 100' concrete, vinyl and other floor surfaces from heavy 061004 4 Mil - 6' x 100' 201006FR traffic during construction and maintenance. 061006 6 Mil - 6' x 100' Flame Retardant 6 Mil - 20’ x 100’ 081004 4 Mil - 8' x 100' 201006B 6 Mil - 20' x 100' Black 081004FR 201008 8 Mil - 20' x 100' Flame Retardant 4 Mil - 8’ x 100’ 201010 10 Mil - 20' x 100' RED ROSIN 081006 6 Mil - 8' x 100' 202001.5 1.5 Mil - 20' x 200' BUILDING PAPER 082001.5 1.5 Mil - 8'4" x 200' 202002 2 Mil - 20' x 200' 094007 .7 Mil - 9' x 400' 241004 4 Mil - 24' x 100' Multi-purpose Building Paper 101004 4 Mil - 10' x 100' 241006 6 Mil - 24' x 100' MD4836 101006 6 Mil - 10' x 100' 281004 4 Mil - 28' x 100' A high-quality, “made in America” single 121004 4 Mil - 12' x 100' 281006 6 Mil - 28' x 100' ply sheathing paper. Red Rosin Paper is 121006 6 Mil - 12' x 100' 321004 4 Mil - 32' x 100' manufactured from kraft paper and is saturated 161004 4 Mil - 16' x 100' 321006 6 Mil - 32' x 100' with rosin. It is useful in a wide variety of 161006 Mil - 16' x 100' 401004 4 Mil - 40' x 100' construction applications. 36” wide x 167’ long roll. 201004 4 Mil - 20' x 100' 401006 6 Mil - 40' x 100'

RUBBER GLOVES RUBBER GLOVES Black Rubber Gloves - VP63B Sol-Vex Gloves - VP7000 Unlined Natural Rubber, Heavy Duty, Unsupported, premium-quality, 40-Mil Thick. 18" long. Rolled cuff. nitrile. 11 mil, 13” embossed straight cuff glove.

16 Jobsite Supply

COATINGS REMOVER CONCRETE BUILDUP & Soy Gel Coating Remover SPLATTER REMOVER With three times the coverage rate of Blast-Off traditional petroleum removers, 600GL Extremely effective at dissolving concrete buildup and splatter without damaging or effectively removes multiple layers of topical corroding exposed steel, chrome, aluminum sealers, acrylics, enamels, urethanes, latex, or electrical components. some epoxies, other single-component Produces a thick, rich foam that clings to coatings, and lead based paint. vertical and overhead surfaces.

FRASG1GWD 1 Gallon Jug NOXBO10L Nox-Crete 2.64 Gal. Box FRASG5GWD 5 Gallon Pail BLAST-OFF SPRAYER MASTIC REMOVER Blast Off Pump Foamer Mastic Remover Sprayer - NOXBOPF Remodel old concrete surfaces covered with For increased effectiveness use Foaming Tip old mastic and adhesives like a pro! this sprayer equipped with the BLUE BEAR Mastic Remover for Concrete blast-off foaming tip. Surfaces is an effective green choice to easily remove old black mastics under tiles and glues NOX8007 Blast-Off Foaming Tip NOX887 Conversion Kit For Foaming Tip To Chapin Sprayer and adhesives under carpet. Home owners can safely restore concrete back to a smooth surface for creative decorating. CONCRETE CLEANER FRAM11GWD 1 Gallon Jug Bio-Clean Ready Cleaner FRAM15GWD 5 Gallon Pail A powerful, ready to use cleaner that deeply penetrates concrete floor surfaces to safely and effectively remove most surface contaminants. CLEANER/DEGREASER 100% biodegradable and non-toxic. Removes dirt, oil, grease, black tire marks, Emerge All Purpose Cleaner D-Greaser bondbreaker And curing compound residue and Cuts through floor tile and carpet mastic on carpet and tile adhesive. hard floor surfaces. This super-concentrated degreaser also works great to clean parts and tools, or to be used as a parts washer solution. Clean oil, grease, dirt and grime. CITRUS CLEANER Citri-Clean FRADF1GWD 1 Gallon Jug Environmentally safe, nontoxic. Dilute with water or use in concentrated form. Removes oil, grease, rubber marks and other contaminants. Also removes cures, sealers BUILDER CLEANER and cure/sealers. Exterior Surface Cleaner (EBC) - 720ES UNX60001 1 Gallon Jug Citri-Clean Degreaser (Formerly Known as EBC Exterior Building UNX60005 5 Gallon Pail Citri-Clean Degreaser Cleaner). Removes efflorescence, cement Also available in 55 Gallon Containers films, and mortar residues. Made from pineapples. Ideal for cleaning concrete and removing efflorescence, cement films, and mortar residues. 720ES is safe to use on all CLEANER DEGREASER natural stone, polished surfaces, stucco, and Citrus Cleaner Degreaser - SP757 concrete surfaces. 100% biodegradable. A heavy duty, multi-purpose cleaner and graffiti FRAEK1GWD 1 Gallon Jug remover. Has pleasant citrus scent. Removes grimy dirt, grease and oil on walls, vinyl, formica, fiberglass, wood, ceramic tile and many plastics. Biodegradable. 20 oz. can (16 oz. net wt.) ADHESIVE REMOVER Ickee Stickee Unstuck Adhesive Remover MURIATIC ACID (Formerly known as: Ickee Stickee Unstuck) Removes glue and adhesive residues quickly. A heavy-duty concrete muriatic acid. Great for building material sticker residue Uses: etching and cleaning concrete. clean-up.

FRAIC1GWD 1 Gallon Jug DO3000 1 gallon container

17 Jobsite Supply

SCRUBS® 25 MAN 72 Count SCRUBS® Bucket - AG422C-072 FIRST AID KIT Premoistened, heavy duty hand cleaner towels 25 MAN Kit - PK06080 that go where you go! Powerful, yet safe, patented Contains: 100 ea. Adhesive Strips (1”x3”), citrus-based formula works together with an 5 ea. Gauze Pads (4”x4”), 1 ea. Large absorbent, nonscratching abrasive hand cleaner Wound Pad, 1 ea. Gauze Bandage (4”), towel for proven performance. 1 ea. Triangular Bandage (40”), 1 roll Adhesive Tape (1/2”x5 yds.), 4 Latex Exam Gloves, 30 ea. Antiseptic Wipes, 6 ea. First Aid/Burn Cream Packets, 1 Cold Pack, 1 pr. Scissors, SHOP TOWELS 1 pr. Forceps, 1 First Aid Instructions. Weatherproof Plastic Case. White Box of Shop Towels - FA1002 200 Count. White shop towels 50 MAN in centerpull dispensing box. FIRST AID KIT 50 Man Kit - PK06450 Contains: Blue Box of Shop Towels - FA1003 100 ea. Adhesive Strips (1”x3”), 200 Count Blue shop towels in 10 ea. Gauze Pads (4”x4”), centerpull dispensing box. 2 ea. Large Wound Pad (5”x9”), 2 ea. Gauze Bandage (4”), 2 ea. Triangular Bandage (40”), 2 rolls Adhesive Tape (1/2”x5 yds.), 4 Latex Exam Gloves, 60 ea. Antiseptic Wipes, 12 ea. First Aid/Burn SHOP Cream Packets, 1 Eyewash (4 oz.), Eye Pads, Strips & Sterile Eye Cup, 2 Cold Packs, 1 Elastic Bandage (2”), 1 pr. Scissors, 1 pr. Forceps, TOWELS 1 First Aid Instructions. Rugged 20 gauge steel weatherproof case.

New Blue Rinsed Huck Towels FA1004 BANDAGES Designed to feel like a cloth and work even better. 80 Sheets per box.

SHOP TOWELS Contains 100 sterile individually wrapped bandages with non-adherent pads. WypAll X-80 Towels in a Box JAC06-05930 PK1000 100 Pc. Box 3/4” x 3” Plastic Adhesive Strips Designed to feel like a cloth and work PK1800 100 Pc. Box 1” x 3” Heavy Woven Fabric Adhesive Strips even better. 80 Sheets per box. PK1900 100 Pc. Box Knuckle Bandages PK1990 100 Pc. Box Fingertip Bandages

SHOP TOWELS EYE FLUSH KIT Eye Flush Kit - PK7600 WypAll X-80 Towels Packaged in a modular box for JAC06-41055 easy removal from the station for Designed to feel like a cloth and work situations where the victim cannot even better. Patented technology allows be moved to where the station is this thick, strong wiper to absorb located. oil and water faster than rags or Contains: 4oz. Flush Bottle 4ea, shop towels. 475 sheets per roll. Sterile Eye Pads 4 sets, Adhesive Eye Strips, 1ea. Sterile Eye Cup. Jumbo Roll Dispenser Floor Model JAC06-80596 A mobile, efficient dispensing reduces waste. Dispenser for WypAll X-80 towels. EYE/FACE WASH eyesaline® Metal with trash bag attachment. Single Bottle Eye Wash Wall Station The Single Wall Stations mount easily with CONTRACTORS peel-off self-adhesive (included) or screws. High visibility in any eye hazard area, GARBAGE BAGS ready for emergency flushing and decontamination of the eyes and face. 42 Gallon Heavy Duty Contractor Garbage Bags (20 per Box) VP42000370 16 oz. Single Wall Station PYGRHDCBAG20 VP42000371 32 oz. Single Wall Station

18 Jobsite Supply

These bound 18" x 18" Mesh Flags BARRICADE MESH FLAGS are made of fluorescent knitted vinyl Plastic A-Frame Barricade mesh material. Recommended to be Cordon off hazardous areas with used on fast moving vehicles. These flags will overcome the problems a highly visible barrier system from “whipping”, such as cracking, consisting of two A-Frame Legs peeling, or fraying. Available with or and one or two I-Beams. without staff. Injection-molded, structural foam SFKV18 A-Frame Leg is extremely SFKV18+27 SASFKV18 Flag Only Mounted on durable. Standard size mounting 3 SASFKV18+27 With Stick ⁄4" x 27" Staff holes accommodate a wide variety of boards. ADA compliant to MUTCD standards. CONSTRUCTION SIGNS Roll-up Signs 48" x 48" Sign Heavy 15 oz. COR-97-01-004-02 Plastic A-Frame Barricade Leg (One End Only) Bright Orange Mesh. All standard COR-97-01-029-02 Plastic Barricade 2” X 8’ Top Rail with Reflective Stickers stock legends – Non stock legends available. Overlays available. Lexan pockets available. BARRICADE IN1020 48" Roll-Up Sign w/Rib - "Men Working" IN1021 48" Roll-Up Sign w/ Rib - "Be Prepared to Stop" 24” Plastic Barricade Type 1 with IN1022 48” Roll-Up Sign w/ Rib - “Flagger Ahead” Reflective Stickers IN1023 48" Roll-Up Sign w/Rib - "Road Work Ahead" COR-97-01-001-05 IN1024 48" Roll-Up Sign w/Rib - "Utility Work Ahead" Type I Plastic barricade 8" length x 24" width x 8" height. Closed-hinge feature Custom Signs Available! Call for more information. prevents pinched fingers during placement and retrieval. L.E.D. Barricade Light SAFETY SIGNS COR-03-10-WAYDC OSHA and ANSI Industrial Operates with 4 D-cell batteries; 3-Way (flashing, 14" x 20" Safety Signs steady burn, off). L.E.D lights located in the Quality indoor/outdoor signs that strongest area of the case for protection. Made in keep you in compliance with OSHA the U.S.A. & ANSI standards.

BARRICADE TAPE LSD151B Danger Hard Hat Area Sign LSD1873B Danger Construction Site- Authorized Personnel Only Sign High visibility 3" wide. Variety of LSD200RC Do Not Enter - Authorized Personnel Only Sign stock and special order legends LSD59RC Keep Out Sign available. Rolls are 3" x 1000'. Available in Heavy Duty 4 Mil or Standard Grade (2 mil). SIGN STANDS Light Duty Tri-Pod Stand For RI1000 “Caution” Tape 4 mil. 48” Signs - COR-07-822 RI1002 “Caution” Tape 2 mil RI2000 “Keep Out” Tape 4 mil. Meets NCHRP-350 requirements with RI3000 “Danger” Tape 4 mil. roll-up sign. Displays 48” roll-up or rigid RI4000 “Caution Wet Concrete” Tape 4 mil. panels without special adaptors. Fabricated from durable, galvanized mechanical tubing. Powder-coated orange metal sign stand. TRAFFIC CONES Offers outstanding visibility. “Slim line” construction decreases wind lift, teamed with rubber base (for underslung center of Heavy Duty Screw Lock Stand gravity) adds up to the most stable cone For 48” Sign - COR-07-801 on the road. Sign stand displays 48” roll-up INTC18 18” Safety Cones panels 14” off the ground. INTC28 28” Safety Cones Durable, lightweight and corrosion- INT2825-5-MM 28” Safety Cone w/ 6” resistant aluminum legs provide & 4” Reflective Stripes longer service life and easier INTC36 36” Safety Cones handling. NCHRP-350 Certified.

19 Ladders, Lifts, and Scaffolding

PODIUM LADDERS STEPLADDERS TWIN STEPLADDERS

Extra-large platform for long standing Fiberglass rails offer safety around Fiberglass construction makes it safe comfort. electricity. for electrical jobs. 4X Work Zone allows you to face any HolsterTop with Lock-In System Heavy-gauge aluminum extruded top direction safely. secures tools w/ thick side plates for solid support. HolsterTop PRO extended guard rail se- Slip-resistant, TRACTION-TRED steps Durable design includes shoulder curely wraps around Work Zone and holds ensure secure footing. bolts, lock nut on top hinge and four an arsenal of tools. solid rivets that attach top to each rail.

3 Ft. Ladder WER08-PD6203 4 Ft. Ladder WER01-6204 4 Ft. Ladder WER02-6204 4 Ft. Ladder WER08-PD6204 5 Ft. Ladder WER01-6205 6 Ft. Ladder WER02-6206 6 Ft. Ladder WER08-PD6206 6 Ft. Ladder WER01-6206 8 Ft. Ladder WER02-6208 7 Ft. Ladder WER01-6207 10 Ft. Ladder WER02-6210 8 Ft. Ladder WER01-6208 12 Ft. Ladder WER02-6212 EXTENSION LADDERS 9 Ft. Ladder WER01-6209 10 Ft. Ladder WER01-6210 12 Ft. Ladder WER01-6212 LEANSAFE® LADDER

SINGLE STRAIGHT NEW! LADDERS

LADDER END CAPS WER06-AC19-2

TRACTION-TRED D-rungs provide secure footing as you climb or stand on ladder. Durable extruded rung locks are spring loaded to operate smoothly. Durable shoe rests flat on slip-resistant pad or is held in spur position with SHU-LOK feature. Slip resistant D-rungs. Mar resistant end caps 20 Ft. Ladder WER03-D6220-2 Twist proof. LEANSAFE® Fiberglass Step Ladder 24 Ft. Ladder WER03-D6224-2 Standard step ladders shouldn't be leaned 28 Ft. Ladder WER03-D6228-2 8 Ft. Ladder WER03-D6208-1 against a wall. The new LEANSAFE® ladder is 32 Ft. Ladder WER03-D6232-2 10 Ft. Ladder WER03-D6210-1 designed to lean against a wall with a ladder 40 Ft. Ladder WER03-D6240-2 12 Ft. Ladder WER03-D6212-1 top that perfectly fits on a wall, corner, or pole.

20 Ladders, Lifts, and Scaffolding

CONTRACTOR LIFT ALUMINUM PUMP JACK SYSTEM Genie® Superlift Contractor® - GEN-SLC-18 Lift, lower, and move loads up to 650 lbs! Legs fold up and attachments are removable for easy storage and pickup truck transport.

Max. Platform Height: 18 ft. 650 lb. Capacity.

• Easy adjustment for multiple working heights. • Strong and durable. • Simple to set up.

12' Aluminum Pole with Base WER05-PJ-12P 24' Aluminum Pole with Base WER05-PJ-24P 22' Safety Net WER05-PJ-SN CONTRACTOR LIFT Aluminum Pump Jack Sumner 18' Contractor Lift Work Bench WER05-PJ-WB WER05-PJ-100 SUM783651 Great all around contractor lift! 650 lb. capacity (300 kg). Ideal for compact storage! 500 lb. Capacity Aluminum Stage - 20" x 16' WER04-2516 Foldable Support Brace Aluminum Stage - 20" x 20' WER05-PJ-SBF WER04-2520

SCISSOR LIFT DRYWALL LIFT PL11C 11' Drywall Lift Electric Scissor Lift - GS1930 MT12421 Ideal for maneuvering in tight spaces, Genie® Lifts sheets of drywall up to 11' ceilings. slab scissor lifts are excellent for indoor and outdoor construction, maintenance and installation applications with firm, level surfaces.

Max. Platform Height: 19 ft. 500 lb. Capacity.

DRYWALL INSTALLATION TOOL HEAVY DUTY HOPPERS All-welded self dumping hoppers Wood Rokk Pro handle bulk materials and scrap ROK1000 easily. Can be moved with a Trusted for the forklift or rolled on casters. Must installation of drywall, use forklift of proper capacity framing, & sheathing. rating to empty hopper. Install 10' sheets by yourself! 211705  1/3 Cu. Yards Capacity Husky Dumper Increases job speed, 31-1/2”H x 30-3/4”W x 48-1/2”L reduces labor costs, and Do this by yourself! job-related injuries. 211731  1 Cu. Yard Capacity Husky Dumper 37”H x 41-1/2”W x 62”L Engineered for trades people, trusted for 211561 2-1/2 Cu. Yards Capacity Husky Dumper Installation of drywall! 51”H x 59-1/2”W x 64”L

21 Ladders, Lifts, and Scaffolding

SCAFFOLDING Common Scaffolding Set-Ups & Accessories SCAFFOLDING COMPONENTS WC035600 Available for WCO35400 12" Wheel Well SALE OR RENT! Hoist Standard

WC032707 WC032505 7' Guard Rail 5' Top Guard Rail WC020500 WCO32000 1-5/16" Guard Rail Post Coupling Pin WC032555 5' Mid Guard Rail

GB510722 WC020600 7' Aluminum Plank Spring Retainer WCO15606 5' x 6'-7" Walk Thru Frame WC026707 7' Gooser

WCO24407 WCO33220 WC020000 7' Cross Brace 20" Side Bracket Toggle Pin

WCO33224 24' Side Bracket WC195600 Gravity Lock WCO15500 5' x 5' 1" Single WCO30600 Ladder Frame 18" Adjusting Screw with Socket

WCO30000 Base Plate WCPC2008 8" Caster

WCO30518 WC042202 18" Adjusting Screw WC026597 WCB57 Dual Purpose Right with Base Plate Diagonal Brace 7' Straddle Brace Angle Clamp

END FRAMES

WC015500 WC015606 WC012300 WC012500 WC015300 WC012300 29” Wide x 3’ Tall End Frame - Red WC012500 29” Wide x 5’ Tall End Frame - Red ”W” Red Series Scaffolding WC015300 5’ Wide x 3’ Tall End Frames • 1-5/8" Diameter Tube, Holes at 90°, S Locks WC015500 5’ Wide x 5’ Tall End Frames • Coupling Pins included with Spring Retainers WC015606 5’ Wide x 6’6” Tall Walk-Through End Frame

22 Ladders, Lifts, and Scaffolding

CROSS BASE PLATES & BRACES SCREW JACKS

Cross Braces SJB

BP More Sizes SJS Available!

BP Base Plate 2.0 lbs SJS Screw Jack W/ Socket 12.0 lbs Straddle Brace SJBJ Screw Jack W/ Base Plate Jr. 9.5 lbs SJSJ Screw Jack W/ Socket Jr. 9.5 lbs

WC025307 7' x 2' Cross Brace 11.50 lbs WC024407 7' x 4' Cross Brace 12.25 lbs SCAFFOLD WC024410 10' X 4' Cross Brace 16.50 lbs CASTERS WCB57 7' x 4' Straddle Brace 15.00 lbs WCB57 7' x 4' Straddle Brace 15.00 lbs

WCPC2008 8" Scaffold Caster GUARD RAILS & GATES

R5 & R7 WC032000 SIDE & END BRACKETS

W-EB23

WC031000 WC033220 Guard Rail Gate GRG-CLA WC033220 20" Side Bracket R5 5' Guard Rail WC033224 24" Side Bracket R7 7' Guard Rail W-EB20 20" End Bracket WC031000 Guard Rail Gate W-EB23 23" End Bracket WC033221 GRG-CLA Adjustable Guard Rail Gate WC033221 20" - 30" Adjustable Side Bracket WC032000 Guard Rail Post WR-GRPC Guard Rail Post Corner Unit (not shown) WR-GRPTB Guard Rail Post w/Toeboard Clip (not shown) W-SBEG20 20" Side Bracket End Guard (not shown) SCAFFOLD HOIST SA W-SBEG23 23' Side Bracket End Guard (not shown) SYSTEM

WW GOOSERS Heavy-duty professional quality for years of use. HS

G3 3' Gooser 6.0 lbs G5 5' Gooser 9.5 lbs WW Well Wheel G7 7' Gooser 12.0 lbs HS Hoist Standard G10 10' Gooser 19.0 lbs SA Swing Arm G10H 10' Gooser (Heavy Duty) 20.0 lbs HSSA Hoist Standard G75 7' X 5' Gooser 13.0 lbs G105 10 X 5 Gooser 20.0 lbs w/ Swing Arm G105H 10' X 5' Gooser (Heavy Duty) 21.0 lbs Scaffolding is available for Sale or Rent - Give us a call for more information!

23 Ladders, Lifts, and Scaffolding

HOOP CANOPY MOBILE SCAFFOLDING

Easily forms a protective work area with your existing scaffolding. Place on top of scaffold frame with poly sheeting for a dry comfortable jobsite.

WC039218 Hoop Indoor/Outdoor WC039219 Female Leg Mobile Scaffolding WC039220 Male Leg SYSUAB-05 All-Purpose Unit

STAIRWAYS & Ready Roll 4' Compact Scaffold - RR4C S764E ACCESSORIES 4 ft. high unit rated at 400 lb. load capacity. Easy to use unit that folds for storage and handling.

WORK PLATFORM SU764I Aluminum Work Platform WER06-AP-20-MP6 STR5 Platform legs lock securely in place when in use and fold underneath platform for compact storage. 225 lbs load capacity.

SU64C 7' x 6' 4" Stairway w/o Hand Rails S764 7' x 6' 6" Stairway w/ Hand Rails SU764I Interior Hand Rail ALUMINUM RAMPS SU764E Exterior Hand Rail Pair Aluminum Folding STR5 Starter Bar Ramps - WCRAF Folds for easy storage and transportation. Weight capacity 1200 lbs. per ramp. WIND CLIPS Weight 64.0 lbs. Wind Clips work on any poly enclosure material! Full sized, 11" Plastic wind clips placed three feet apart will reduce labor with their easy snap on design, hold poly securely to the scaffolding, reduce noise caused by flapping poly and fit most commercial scaffolding. SHORING POSTS WD1000 100 pc. box of Wind Clips G-Style PS-1G 5' 0" to 9' 0" PS-2G 6' 0" to 11' 0" PS-3G 8' 0" to 13' 0" REINFORCED POLY PS-4G 10' 0" to 15' 0" Max Katz® Blue Stripe™ B-Style Reinforced Poly Film PS-1B 5' 9" to 10' 3" PS-2B 6' 6" to 11' 0" A superior heavy duty film that PS-3B 8' 6" to 13' 0" resists tears in ANY direction. PS-4B 10' 6" to 16' 0" Whenever you need an extra W-Style strong fabric to protect your work sites, PS-2W 6' 0" to 11' 0" materials, equipment, from rain, snow or wind this PS-3W 8' 0" to 13' 0" reinforced poly film is ideal. PS-4W 10' 5" to 15' 6" F-Style MK2012 12' x 100' MK2024 24' x 100' PS-1F 5' 1" to 9' 0" PS-2F 6' 0" to 11' 0" MK2016 16' x 100' MK2032 32' x 100' PS-3F 8' 0" to 13' 0" MK2020 20' x 100' MK2040 40' x 100' PS-4F 10' 0" to 15' 0" G-Style B-Style W-Style F-Style

24 Ladders, Lifts, and Scaffolding

ALUMINUM PLANKS ALUMINUM EXTENSION & RAIL SYSTEMS PLANKS

These scaffold planks offer a 500 pound duty rating and allows for 2 people on one plank. The TWIST-PROOF® stage design is ideal for Ideal for use on stepladders, telescoping multiladders, ladder jack applications, swing stages or catwalks. Individual extension trestle ladders and extension and single straight slip-resistant decking minimizes paint or material build-up. ladders equipped with ladder jacks. Positive stops on the plank Vinyl-coated end caps serve as hand grips and protect from prevent overextending. Molded thermo-plastic spacer guides sharp edges and surface marks. allow for easy open/close action. Made of 2" deep box section extrusions. 250 pound load capacity. WER04-2316 12” X 16’ Aluminum Plank 2- Person 500 Lbs. WER04-2320 12” X 20’ Aluminum Plank 2- Person 500 Lbs. WER04-PA208 8’ to 13’ Aluminum Extension Plank WER04-2324 12” X 24’ Aluminum Plank 2- Person 500 Lbs. WER04-PA210 10’ to 17’ Aluminum Extension Plank WER04-2516 20” X 16’ Aluminum Plank 2- Person 500 Lbs. WER04-2520 20” X 20’ Aluminum Plank 2- Person 500 Lbs.

Stanchion Post Assembly Guard Rail System Square Guard Rail ALUMINUM SCAFFOLD Gives versatility to design a 1, 2, or 3-sided BOARD guardrail system. Select from end rail/toe board assemblies, stanchion Toe Board posts, square guard rails and toe boards in 9' and End Rail and End Toe Board Assembly* *Each Kit includes 2 end rails, 1 toe board 13' foot cut lengths. Heavy gauge heat-treated structural aluminum alloy. Hooks accommodate 1.66" and 2" O.D. pipe. Meets or WALL JACK AND BRACE Exceeds OSHA requirements. Weight Rating: 75lbs. per foot. Pair 16' Tranzsporter GB510722 7’ x 19-1/4 Aluminum Plank Wall Jacks - TIE48581 Designed to safely and efficiently lift preformed walls into a vertical LAMINATED position. Capable of PLANKS lifting 1,000 lbs! TranzSporter Wall Braces - TIE48580 WC1016 16 Foot Laminated Plank After lifting walls, use the new TranzSporter Wall Brace to secure the wall ROOF ANCHOR in the vertical position. Fixed Roof Anchor Bracket 90-Degree for 2" x 6" Board WW-WW03644 HANGING SCAFFOLD Weight Capacity: 175lbs/Bracket. Wall Walker - 6 Foot, Top-Plate Bracket 4 offset nail slots that will not Aluminum Scaffold Set (Pack of 2) allow the bracket to slide up. WW-WW03644 The WallWalker® Hanging Scaffold System provides a safe work platform from tops of SCAFFOLD BRACKET walls, roofs, windows, and other hard-to- reach places. Eliminates the need to construct Steel Wall Scaffold 48" wooden and non-engineered makeshift Scaffold Bracket scaffolding or heavy steel alternatives. PP848SB Meets OSHA Standards! Convenience for residential or commercial roofing projects. Create a safe, convenient walkway for erection of roof trusses, plywood, shingle, fascia, gutters, and under eave covering.

25 Marking Materials

STRIPING MACHINES INVERTED Engineered and designed for easy operation and durability. MARKING PAINTS 18-gauge all-steel construction. 12-can storage. Stripes widths of 2” to 4”. Krylon® Industrial Quik-Mark™ Inverted Marking Paints Athletic Field Striping High solids formulation for bold, bright, visible Machine - SP7080-A markings. Fast-drying, high-solids formula 10” wheels elevate the penetrates and adheres to hot surfaces. carriage to provide an ™ even ride over rough or Convenient Spray-Thru cap and non-clogging uneven surfaces Ideal for spray tip. VOC compliant, free-of-lead hazards. grass, dirt, gravel or any uneven surface. FLUORESCENT Solvent-Based Marking Paints - 17 oz. High-solids formulation for bold, bright, visible markings Fast-drying formula penetrates and adheres to hot and cold surfaces. SP3613 Fluor. Safety Red SP3702 Fluor. Orange SP3614 Fluor. Neon Green SP3722 Fluor. Blue SP3622 Fluor. Hot Pink SP3900 Brilliant White

Paint Striping Machine - SPSL30 APWA Water-Based Marking Paints - 12 oz. 7” wheels provide a smooth ride on hard surfaces, such as concrete, blacktop and metal. Excellent for use in parking SP3401 Brilliant White SP3406 Brilliant Blue lots, warehouses, plants, factories, etc. SP3402 Brilliant Yellow FLUORESCENT Water-Based Marking Paints - 12 oz. MARKING SP3408 Fluorescent Orange WAND

Long Wand Spray Can Holder SPLW40 APWA Inverted Water-Based Constructed of durable, rugged plastic and CLEAR Marking Paint - 17 oz. lightweight steel. Comfortable pistol grip for SP3500 easy handling and marking. Apply a uniform, 1" to 1-1/2" width of paint. Spray clear water based marking paint on chalk and paint lines to extend wear and impede fading.

STRIPING PAINTS Solvent-Based Pavement OSHA COLOR PAINT Striping Paints Fast drying. Long-lasting durability OSHA Paint - 12 oz. on outdoor pavement and indoor Matches OSHA standard colors. surfaces. Non-clogging spray tip. High visibility safety colors. VOC compliant, free-of-lead hazards. Ideal for signs, pipes, safety equipment Uses: Warehouse aisles, parking and more. lots, school grounds, construction and excavation sites, road surfaces, nurseries, apartment complexes, SP1310 OSHA Yellow SP1770 OSHA Black fairgrounds. 18 oz. cans. Case Pack: 12. SP1800 OSHA White SP7140 Highway White SP7141 Highway Yellow PRIMERS White Water-Based Athletic Field Striping Paint Sandable Primers SP7145 Fast drying. Ideal for grass and fields or Use industrial sandable primer to build up short-term striping. Non-clogging spray tip. repaired metal areas to smooth, even surface. VOC compliant, free-of-lead hazards. Dries to the touch in 5 minutes and may be Uses: Athletic fields, golf courses, football, recoated in one hour. soccer and baseball fields. 18 oz. cans. Case Pack: 12. SP0342 12 oz. Can Red Primer SP1314 12 oz. Can Platinum Primer

26 Marking Materials

REBAR GREEN EPOXY MARKING PENS Tough Coat® Rebar Green Epoxy Features a high-solids formula that PM-16 Mighty Marker® Paint Marker resists rust stains in concrete. Adheres Indoor & Outdoors use. Marks on Metal. Works on most to most substrates. surfaces. Permanent. Quick drying. Water proof. Highly visible. Oil based opaque paint. SP1732 12 oz. Can Rebar Green Paint AG84002 Black Mark & Code Pen ARRO-MARK AG84003 White Mark & Code Pen AG84004 Yellow Mark & Code Pen UTILI-COAT PAINT AG84005 Orange Mark & Code Pen AG84006 Red Mark & Code Pen Rust Tough® Utili-Coat™ A rust-preventative acrylic alkyd enamel that offers state-of-the-art corrosion protection. Provides excellent gloss and color retention, superior MARKERS durability and one-coat coverage.

K20879 15 oz. Can Utility Meter Gray Sharpie® Permanent Markers Industrial strength for tough marking jobs! Marks on wet and GALVANIZING oily surfaces. COMPOUND QL801S3000 Fine Point Magic Marker QL972-15001 King Size Black Magic Marker Sprayon® Silver Galvanizing Compound A sacrificial coating that inhibits rust and corrosion to ferrous metals. An excellent fast drying touch-up Industrial Grade Pencils for repair of galvanized substrates. Has the bright CARPENTER with Flat Lead finish of hot-dip galvanized coating. PENCILS Environmentally friendly pencils, SP739 14 oz. Can Metallic Silver Galv. Compound made from natural base wood. 3/16" wide lead resists breakage and lasts longer. Also GALVANIZING sold in 72 count box. COMPOUND KSLP72 72 count box - Black Zinc-Rich Cold Galvanizing Compound KSLP72R 72 count box - Red A fast-drying, high-solids coating that provides maximum protection to steel exposed to severe corrosive environment. This high performance epoxy-based coating fuses zinc to the metal LUMBER CRAYONS substrate to protect against corrosion. Fade and Weather Resistant SP740 14 oz. Aerosol Can Lumber Crayons 74000 1 Quart Container These unique marking crayons can be 74001 1 Gallon Container used practically anywhere on cardboard, 74005 3-1/2 Gallon Container ceramics, concrete, lumber, metal, and paper! Special lead-free formulation provides permanent water-proof marking. Also sold in boxes ACRYLIC of 12 or 108 count. ENAMEL PAINTS

Tough Coat® Acrylic Enamel KSLCR Red Lumber Crayons KSLCW White Lumber Crayons Features a high-solids formula KSLCBL Blue Lumber Crayons that ensures maximum coverage KSLCB Black Lumber Crayons and performance. Delivers the KSLCY Yellow Lumber Crayons ultimate in protection, durability, high gloss and color retention. Specially formulated for a variety Lumber Crayon Holders of industrial applications. Uniquely designed lumber crayon holder permits KSPS100 Walnut Wood advancement of crayon to LCHolder Aluminum Crayon Holder any desired length, and LCH100 Carded Aluminum Crayon Holder with Crayon SP1760 12 oz. Can Aluminum Spray Paint then retracts to prevent PS100C Carded Wooden Holder SP3727 12 oz. Can Flat Black Spray Paint breakage.

27 Storage & Materials Handling

SAFETY CANS SAFETY STORAGE CABINETS Galvanized Steel 30 Gallon Yellow Safety Cabinet Type-I Safety Cans EG1932 These Eagle Safety products meet Keep flammable liquids near OSHA requirements and most are either work areas in Eagle Safety Factory Mutual (FM) approved or listed Storage Cabinets! by Underwriters Laboratories, Inc. (UL), Features: and Underwriters Laboratories Canada • 18-gauge steel. (ULC). Eagle Safety Containers are Sides, top, bottom, and manufactured to exacting standards, doors are double-walled. reflecting sophisticated technology and superior workmanship. • Both vents have fire baffle and cap. Model Capacity Approval • Cabinets come in yellow EGU120S 2 gal. UL, ULC, FM high gloss powder finish EGU125S 2.5 gal. UL, ULC, FM with red warning, plus EGU150S 5 gal. UL, ULC, FM grounding attachment. EAGLE Type-I Safety Cans are available Each shelf is adjustable, supported by 4 brackets, and can in yellow or blue finishes by using support 350 pounds. Meets OSHA Requirements. FM Approved. the model number followed by the Meets NFPA Code 30 Requirements. word yellow or blue. These cans are manufactured to the same exacting standards and quality workmanship as CONTAINERS our standard safety cans. & CARTS All Type-1 EAGLE Safety Cans come BRUTE® Round Containers with a plastic spout. Durable, heavy-duty containers for a variety of uses. Built with its trademark durability EGF-15 Plastic Spout for Safety Can and toughness, they feature the newest innovations to improve productivity and ease-of-use. Type-II Safety Cans SAFETY CANS RUB-FG264300GRAY 44 Gal. Brute Container with out Lid Galvanized Steel construction helps RUB-FG265500GRAY 55 Gal. Brute Container with out Lid reduce the danger of explosion RUB-FG264000BLA SF Brute Dolly while dispensing flammable liquid. Includes flexible 12" metal spout. 2-Shelf Utility Cart with Lipped Brass flame arrestors in filler Shelf - RUB-FG452088BLA opening and pour spout. Both sizes Perfect for transporting materials, available in red, yellow or blue. supplies, and heavy loads in almost Model Capacity Approval any environment. U2-26-S 2 gal. UL, ULC, FM U2-51-S 5 gal. UL, ULC, FM Structural Foam Tilt Truck EGF-25 Spout for Safety Can RUB-FG9T1400BLA Durable molded trucks handle heavy loads with ease. 850 lb. max. SAFETY LABELS

Meets OSHA Requirements. WASTE CAN 10 Gal. Red Poly LS1000 Gasoline Label LS2000 Gasoline Mixture Label Oily Waste Can - RUB-FG9T1400BLA LS3000 Diesel Fuel Label Fire safe temporary storage of solvent rags, LSCL51L Danger Gasoline Label waste rags, shavings and other materials LSCL86L Danger Diesel Fuel Label subject to spontaneous combustion.

CIGARETTE DISPOSAL PLAN BAG Plan / Blue Print Bag SafeSmoker - EG1206GREEN OUT-910-000100 A 5 quart cigarette receptacle is made of green high The Outpak plan bag protects density polyethylene (HDPE) with UV inhibitors, with blueprints from the elements. They are a galvanized steel collection bucket inside. Design made from a durable 20oz. PVC to restricts oxygen to quickly extinguish burning butts. guarantee a long life of the product.

28 Storage & Materials Handling

JOBMASTER CHEST JOBMASTER CHEST FIELD STATION

48"L x 24"W x 26"H KN4824 Versatile, portable. Holds anything from hand and power tools to shovels. JOBMASTER CHEST Features a full length piano hinge, to resist break-in attempts. WITH EASY ACCESS Ideal for a personal box on a jobsite DRAWER or added security inside a trailer.

60"L x 24"W x 24"H KN060 60"L x 24"W x 36"H KN069 60"L x 24"W x 48"H KN089 KN119-01 Think of it as command central, this ROLLING CABINET field station serves as the jobsite of- fice to securely store tools, supplies, documents and more. 48"L x 30"W x 35"H 60" long, 44" wide and has a capac- KN4830-D ity of 120.7 cu ft.

CRANE LIFT KIT SADDLE BOX Set of 4 - KN497

KN100 Provides easy-access shelving storage for tools, equipment and supplies. 14" deep shelf with a 1" hemmed lip. 12-7/8" minimum spacing between shelves. 4 CASTER WHEELS Standard Load capacity of 1,200 lbs. 71.5"L x 20.25W x 18.5"H (2) Rigid, (2) Swivel For commercial electricians with KN127 small hardware and materials. 5" Casters Extra Wide KN505 71.5"L x 27.5W x 18.5"H 6" Casters KN117 TRUCK RACK KN695

LOCKABLE DOOR KIT For the Field Station- KN488 Secure truck storage!

Load Capacity 800 lbs. Also available KN1200 in black.

29 Storage & Materials Handling

POWER BUGGIES CONTRACTOR 6 Cu. Ft. Wheelbarrow BRE-BW6S Their massive WHEELBARROW Professional grade wheel- two-inch thick barrows are built for solid steel tank- masonry, concrete tough frames construction, demolition, provide unparalleled rough job sites. Lacquered strength and durability hardwood handles. along with a lower center UV-resistant .275" thick of gravity and ideal weight HDPE pan. Wheels with distribution. Standard heavy-duty ball bearings features like heavy-duty and grease fitting. hydraulic wheel motors, Cushioned grip handles. steel raceways for hydraulic hose protection and optional foam-filled tires ensure the #AR16 and #AR21 Power Buggies will operate for the duration under tough conditions. CONTRACTOR ALN058801 #AR16 16 Cu. Ft. Power Buggy w/ Foam Filled Tires WHEELBARROWS Also available: 21 Cu. FT. Model Heavy Duty Contractor Wheelbarrows Outlasts and outperforms POWER BUGGY all other brands on the job. Special deep, narrow tray design plus far forward position on undercarriage mean easier lifting, transport and discharge. Carry heavier loads with less effort. ST530-16-42DB Metal Tub with Air Tire ST530-16-42DB-FF Metal Tub with Flat Free Tire STDWB-530-42 Metal Tub with Dual Air Tires AT-16 Track Driven 16 Cu. Ft. Power Buggy ALN056800 The Allen AT16 track drive Power Buggy provides excellent CONTRACTOR traction on grades, inclines, and soft soils. This buggy comes WHEELBARROWS equipped with a 25 hp Kohler engine and a two speed hydrostatic transmission that provide excellent torque and Jackson® wheelbarrows are power to carry payloads up to 2,500 lbs. It is also equipped the professionals' choice for with a 16 cubic foot, easy-to-clean polyethylene bucket. superior quality, value and performance. Heavy duty steel or poly trays, professional grade POWER BUGGY steel undercarriages and strong hardwood handles add up to the toughest, most dependable wheelbarrows on the jobsite. Don't compromise, choose Jackson and get the job done.

ASM6T22BB 6 Cu. Ft. Steel Tub with Air Tire ASMP575T22BB 5 3/4 Cu. Ft. Poly Tray

BRICK AND TILE 16 Cu. Ft. Power Buggy with Foam Filled Tires MQWBH-16F WHEELBARROW • Heavy-duty frame with low center of gravity. Single Wheel Brick and • Powered by a Honda GX390 engine recoil start. Tile Wheelbarrow • Large 5.5-gallon (20.8 liters) fuel tank for extended BON28-7-85 uninterrupted service Increased stability and traction. • Capacity of 16-cubic feet (453 liters).

30 Jobsite Equipment

VIBRATORY PLATE RAMMER COMPACTOR COMPACTOR 19" x 21" Plate Compactor Rammer Compactor MBWGP2000GH MBWR440 Frequency, amplitude, centrifugal Ideally suited for the compaction of force and mass are adjusted to granular, mixed and cohesive soils in provide optimal productivity in the confined areas. The R440 offers highly compaction of sands and gravel. productive percussion rammers at less than The GP2000 is capable of achieving 147 lbs. The contoured fuel tank provides excellent densities on lifts of granular the largest fuel capacity in its class and soils up to 14" *. effectively baffles engine noise. Power 5.5HP Honda. 3250 lb. Force. is supplied by a Honda GX100 engine. Operating weight: 165 lb. 4-cycle engine.

* Clean sand, optimum moisture. MBW recommends that lifts not exceed 12". RAMMER VIBRATORY PLATE COMPACTOR COMPACTOR Multiquip Rammer Plate Compactor - MBWGP3550GH MQMTX60HD The GP3550 is a premium, high production • Cyclonic air cleaners that captures compactor with life expectancy that runs 98% of airborne dust particles. to decades with reasonable maintenance. • Long-lasting laminated wood and The base plate is self-cleaning with an steel shoe. open sided plate design that allows • Low vibration handles for operator material to flow out and away from comfort. the belt/pulley assembly during • Durable guards to protect the operation. Provides reduced engine from damage. hand/arm vibration, full roll cage • Redesigned fuel tank to meet EPA protection, enhanced amplitude, faster standards for evaporative emissions. travel speed and updated yet rugged appearance. 5.5HP Honda. 3500 lb. Force. Operating weight: 226 lb. RAMMER REVERSIBLE PLATE COMPACTOR COMPACTOR

BPR 35/60 Reversible Plate Compactor BT60/4 Rammer with Honda BOMBPR35/60 GX100 Honda Motor & 11” Shoe Working width 23.6”. 4.8hp. BOMBT60/4 Honda GX160 Motor. 423-430lbs. Engine Protection System. Vibration Compaction of granular, cohesive insulated steering bow. Infinitely and mixed soils. Compaction variable frequency. of backfill around footings and foundations. Backfilling trenches. Use for setting of patio block and pavers, asphalt, and compaction RAMMER COMPACTOR in confined areas. BS60-2i Jumping Jack Rammer 11” Shoe - WAC9339 • Integrated fuel valve and gas lever VIBRATORY PLATE provide simple operation and easy COMPACTOR starting. • Unit will shut down if left idling BVP 18/45 Plate for extended period of time which Compactor with 4.8hp reduces emissions. Honda GX160 Motor • A unique four stage air filtration BOMBVP18/45 system provides a virtually dust-free Compaction of a wide variety engine for longer life and improved of sand, gravel and granular durability. The system includes a last base materials. Works with hot chance filter that protects the engine and cold asphalt patching. during air filter maintenance. Weight: 198 - 201 lbs.

31 Jobsite Equipment

RAMMER COMPACTOR RACK CHIPPING RammerRack HAMMER • Lockable clamp to reduce theft. • Maximize bed space. • Attach to bumper rack. • Transports in upright position. • Bolts from under bed.

The CP 413 Chipper with Whip Hose, Fittings and “D” Handle - CHICP4130 Store it upright on Designed to tackle punishing jobs with the hard your vehicle! hitting power that you expect from CP. It is used for RMR-RAMMERRACK-RR1 Type I For Multiquip & Wacker BS50-4 medium-duty to heavy-duty chipping, cutting and RMR-RAMMERRACK-RR2 Type II For Bomag, Weber & Wacker BS60 trimming operations. The four bolt handle provides RMR-RAMMERRACK-RR5 Type V For MBW higher air flow and durability.

POST POUNDER BREAKERS Rhino GPD-30 Gas Powered These demolition tools are designed to Post Driver deliver the power and durability necessary RHIGPD-30 for a variety of construction and plant Drive posts in seconds! maintenance applications such as breaking  Powered by a Honda engine. heavy concrete, reinforced concrete, frozen Weighs only 35 pounds ground, macadam, boulders and pavement. when filled! Alloy steel forgings for excellent durability.

CHICP1230 60 LB Breaker CHICP1240 90 LB Breaker

CHISEL SCALER HEAVY-DUTY AIR HOSE Air-Powered EDCO Chisel Scalers eliminate HS4003 3/4” x 50’ Air Hose with hammers, chisels and hand labor! Universal Couplings. Nitrile blend • Ergonomic design lets operator stand tube reinforced with 2 and 4 spiral upright eliminating back-aches. polyester yarn with neoprene cover. • Removes up to 200 sq. ft. per hour of 4” ceramic tile set in standard thin-set. BRUTE™ BREAKER HAMMERS

3,500 hits 1-1/8” Hex Breaker Hammer per minute! with Cart & Bits - BOS01-BH2760VCB Unmatched Power-to-Weight Ratio - With 60% more impact energy than the original Brute and weighing in at just 65 lbs. Total portability operates on 115/120v AC./DC, 15 Amp outlet CONCRETE LIFTING DEVICE or 6 KwH portable generator.

Brute™ Turbo Breaker Hammer with Deluxe Cart - BOS01-BH2770VCD Providing 1,000 bpm and 43 Ft.-Lbs. of impact energy, this tool can handle heavy-duty applications such as outdoor asphalt work or Monkey Fist - MON5438-00 indoor foundation removal. The breaker Remove concrete slabs without using a breaker! hammer with included deluxe cart is fully Simply core drill a 2 hole in or near the center of the piece to be mobile and doesn’t need a compressor. removed (for balance), insert the Monkey Fist and lift the slab out. Easily reusable! 6500 lb. Limit.

32 Jobsite Equipment

GENERATORS PORTABLE GENERATORS Consistent power output GENERATORS and easy startup! 3600 Watt Camo Series Generator MTMGEN-3600-0DM0 4 Gallon Gas tank, 8.5 Hr. Run time.

Super Quiet Generator 6000 Watt Camo 2000 Watt - HNEU2000I Series Generator MTMGEN-6000-0DM0 Runs up to 8.1 hrs on less 6.6 Gallon Gas tank, than a gallon of fuel. 6.5 Hr. Run time. Ideal for TV/DVD, satellite, fridge, coffee pot, and more. Construction Generator 3000 Watt Super Quiet Generator 8000 Watt Camo HNEB3000CKAG 3000 Watt - HNEU3000IS Series Generator OSHA Worksite Compliant Power your furnace, fridge, MTMGEN-8000-0DM0 Operates 9.4 hrs. at 50% microwave, most 13,500 6.6 Gallon Gas tank, load, using only 2.6gal. BTU AC units, and more. 6.0 Hr. Run time.  Up to 20 hrs on 3.4 gal of gas. GENERATORS More Models Available!

GAS ENGINES The preferred generators of contractors everywhere! Withstands the rough handling on the job site or in the back of a truck. Additional twist-lock receptacles have been added for operator convenience. Hinged

design lays flat when not in use. Construction Generator Low maintenance for years of w/ Wheels - 5000 Watt dependable service. Superior HNEB5000XK2A voltage regulation helps to keep tools and equipment running at Runs up to 11.2 hours on optimal levels and helps them last longer. 6.2 gallon tank. 5.5 HP Honda Motor (#GX160UT2QX2) 7,000 watts for 10 secs to GA-3.6HZ 3,600 watt, Honda Powered, Recoil start HNGX160K1QX2 GA-6HZ 6,000 watt, Honda Powered, Electric and recoil start start larger equipment. GA-9.7HZ 9,700 watt, Honda Powered, Electric and recoil start Lower noise levels, lower 120/240V Selector switch. MQUWK2 Wheel Kit For Multiquip Generators vibration, and lower emissions – without sacrificing power output or performance. DIESEL GENERATORS

Construction Generator w/ Wheels - 6500 Watt 8 HP Honda Tow Behind Generators HNEB6500X Motor (#GX240) Baldor portable generators are designed to meet your demands HNGX240K1QA2 when dependable portable power is required. The performance and Runs up to 10.4 hours on durability of Baldor portables have made them the "generator of 6.2 gallon tank. More power. Quieter choice" for industrial and rental/construction applications. Baldor’s performance. Lower fuel brushless two-pole design is maintenance free and manufactured to 120/240V Selector switch. consumption & emission. the highest quality standards.

33 Jobsite Equipment

AIR COMPRESSORS

CFM @ 90 PSI: 17.2 2700 PSI Cold Water with Honda Engine - MTMJP-2703-OMHB CFM @ 90 PSI: 4.2 9 HP Honda Twin Tank Quick connect nozzles (0 Degree, MTMAC2-PH08-08M (#AM2-PH09-08M) 15 Degree and 25 Degree) 2 HP Electric Hand Carry Quality cast iron two stage compressor MTMAC1-HE02-05M (#AC1-HE02-05M1) 50-foot x 3/8-inch non-marking hose with with venting system. quick connects, swivel and bend restrictors. Quality single stage compressor. 8-gallon twin tank receivers. Stainless-steel braided discharge hose. Oil lubricated aluminum crankcase. 5-gallon powder coated tank assembly.

3000 PSI with Subaru Engine CFM @ 90 PSI: 7.3 MTMCA-3003-1MAS Quick connect nozzles (0 Degree, 15 Degree CFM @ 90 PSI: 9.3 1.5 HP Electric Twin Tank and 25 Degree) MTMAC1-PE15-08M 20 Gal. 2 HP Outdoor Series 50-foot x 3/8-inch non-marking hose with Quality single stage compressor. quick connects, swivel and bend restrictors. Electric - MTMAM1-VE02-20OD Stainless-steel braided discharge hose. Quality cast iron single stage compressor. Oil lubricated aluminum crankcase. Splash lubricated cast iron crankcase to 8-gallon twin tank receivers. extend the hours of performance.

PRESSURE WASHERS

3500 PSI Cold Water with Honda Engine - MTMJCW-3504-0MHB Quick connect nozzles (0 Degree, CFM @ 90 PSI: 13.9 15 Degree, 25 Degree and 40 Degree) 50-foot x 3/8-inch non-marking hose with 6.5 HP Honda Twin Tank 3500 PSI Hot Water w/ Honda quick connects, swivel and bend restrictors. MTMAC1-PH55-08M (#AM1-PH65-08M) Quality cast iron single stage compressor. Engine - MTMHSP-3504-3MGH Stainless-steel braided discharge hose. Quick connect nozzles (0, 15, 25 and Splash lubricated cast iron crankcase to 40-degree). extend the hours of performance. 50-foot x 3/8-inch steel wire-braided Cast iron head for heat dissipation. pressure hose with quick connects, swivel and bend restrictors. 8-gallon twin tank receivers. Temperature rise 150 F. Max 200 F.

34 Jobsite Equipment

COMPRESSORS COMPRESSOR OIL Two-cylinder, high-efficiency single-stage pump includes cast iron cylinders, stainless steel reed valves, oil sight glass, oil drain 34 oz. Synthetic Oil extension, and finned after cooler. ROL-OILBLNDSYN Allows compressor to function in harsh weather. Reduces carbon build-up. Provides 2,000 to 4,000 hours of life in compressor.

1.5 HP 9 Gallon Twin Tank 8 oz. Air Tool Oil ROL-5715K17 ROL-OILTOOL8 Capable of running 3-4 framing guns, 3-5 roofing guns, or 7-9 trim/ 16 oz. Air Tool Oil finish guns. ROL-OILTOOL16 Capable of running on a 20 Amp Nailer oil designed for 1 HP Single Tank Hand Carry breaker. extreme temperature use. Super Quiet - ROL-JC10 AIR HOSE 1/4" 50' Hose ROL-1450NOODLE 1/4" 100' Hose ROL-14100NOODLE

SUBMERSIBLE 2 HP Hand Carry Twin Tank 5.5 HP Honda Twin Tank PUMPS ROL-FC2002 ROL-4090HK17 Stack-tank design with a low amp draw. 9.3 CFM pump capable of 3-5 1/2 HP 2" Submersible High output 4.1CFM pump capable of framing guns or 4-7 roofing guns. Trash Pump running 1-2 framing guns, 1-2 roofing TSUHS24S-62 guns or 3-5 trim/finish guns. A semi-vortex Equipped with cold-start for winter weather. 2 HP 3.2 Gal. submersible trash pump Tank Electric with agitator. 2-inch 1.5 HP, 1.5 Gal with Dolly Cart discharge. 20' cable. "Baby Bull" & Tool Box ROL-FC1500HBP2 ROL-VT20TB 2" Electric Top 4 CFM capable of 4.2 CFM pump Discharge Submersible running 1 framing gun, capable of running Pump - TSULB480-62 1-2 roofing guns, or 1-2 framing guns, Single Phase, compact 1-3 trim/finish guns 1-2 roofing guns, or dewatering pump. 2-inch Small, lightweight, 3-5 trim/finish guns. discharge. 32' cable. only 39 lbs. Built-in tool box for Equipped with storage and easy- cold-start for winter access manifold. weather. Removable handle. HOSES & STRAINERS

2.5 HP, 5.3 Gal. 10 Gal. Air Keg Tank Electric ROL-TNKASYAIRPBT ROL-VT25BIG Gives you more air 6.5 CFM pump power on the jobsite. 2" x 20' Suction Hose - HS1002 capable of running Decrease pressure loss 3" x 20' Suction Hose - HS1003 nail guns and other to drive nails at top 2" x 50' Discharge Hose Blue - HS2002 small tools. efficiency. 3" x 50' Discharge Hose Blue - HS2003 Popular portable Place the auxiliary tank dolly-cart design. closer to this reserve 2" (Large Hole) Pump Strainer - HSSRHS2 Equipped with air tank to decrease 3" (Large Hole) Pump Strainer - HSSRHS3 noise levels. cold-start for winter. 2" (Small Hole) Pump Strainer - HSSHS25 3" (Small Hole) Pump Strainer - HSSHS30

35 Jobsite Equipment

TOW BEHIND DRUM PUMP COMPRESSORS Rotary Hand Pump JE140030 Fits 15 to 55 gallon drum with 2" bung openings Rotary vane type pump for dispensing gasoline, diesel fuel, kerosene, machine oil, lube oil, transmission fluid, hydraulic fluid and similar light petroleum products. 4' PVC discharge hose.

DRUM PUMP SPRAYER A full featured, easy-to-use power sprayer that can be positioned on top of any container you wish to dispense from. Designed to replace the standard pump- up sprayers and will reduce the Ideal for use in heavy-duty construction businesses. time needed for most spray-on Designed to withstand years of use in tough field applications, freeing labor for other tasks. operations. They have power-saving features and heavy- Available in either AC or DC power options that duty industrial diesel engines. easily spray high solids and high viscosity products.

WGWPCS-00100 AC Drum Pump Sprayer PUMPS WGWPCS-00200 DC Drum Pump Sprayer

FORM SPRAYER 27gal. Gas Powered Oiler 5HP Honda -100' Hose DF1000 Duraform’s® 27 Gallon Form sprayer extends the life of your forms. Apply a uniform 2" Centrifugal Pump film of release agent. w/ 4 HP Honda Engine No wasted product. 2" Trash Pump w/ Honda KOSSEH50X Six times faster than by 4.8 HP Motor KOSKTH50X hand. 5HP Honda 9,480 GPH. -100’ Hose. 1" solids pumped through. Impellers and volutes are 185 GPM. Strongest seal on constructed of cast iron. the market.

2" Centrifugal Pump w/ 3" Centrifugal Pump w/ 3" Centrifugal Pump w/ Koshin 4.7 HP Engine 3" Trash Pump w/ Honda 4.7 HP Koshin Engine 7.9 HP Motor 5.5 HP Honda Engine KOSSEV50X KOSSEH80X KOSSEV80X KOSKTH80X 9,480 GPH. 14,760 GPH. 14,760 GPH. 1.5" solids pump through. Cast iron impeller and volute. Cast iron impeller and Cast iron impeller and 354 GPM. Strongest seal on Heavy duty roll cage. volute. Heavy duty roll volute. Heavy duty roll the market. cage. cage.

36 Jobsite Supply & Clean Up

CARPET SWEEPER BIG GREEN COMMERCIAL BIS-BG21 VACUUM Two rows of double brushes for wet messes. BIS-BGU8000 Corner Brushes. 13" wide cleaning head. Great for low carpet and bare floors Weighs only 8 pounds. with a 7.5 in. cleaning path. 40 ft. power cord. 25 Pack Vacuum Bag BIS-U8000-PK25

BIG GREEN CORDLESS EXTRACTOR COMMERCIAL ELECTRIC SWEEPER DEEP CLEANING MACHINE BIS-BG9100NM BIS-BG10 Extra long life, energy saving, geared Large capacity tanks. motor. Adjustable Handle. Titanium bushings for brush roller. 25 foot extension cord and 50 foot (Will not wear out like brass bushing.) cleaning brush. Laser balanced brush roller & wheels for smooth & even operation. Hose & Upholstery Tool Non slip geared belt. Telescoping handle that makes operating BIS-30G3 comfortable. Hose with upholstery tool 10' long Hose Additional Batteries 5.5" wide upholstery tool BIS-BG81KBAT-NM

DELUXE SWEEPERS BACK-PACK VACUUM Battery Powered Push Sweeper BIS-BGPRO6A BIS-BG81KBAT-NM 6 quart capacity. 31" wide, 13.2 gallon debris container Only 10-12 pounds Ergonomic Push Handle. 50 ft. power cord. Sweeps fine & course dirt, wet & dry leaves. Side rollers that make sweep- 10 Pack Vacuum Bags ing along walls easy. BIS-BGPKBP10.6QT Stand up storage design for easy use, comes with lubricant spray.

Battery Powered Features: Maintenance free motor and battery! Manual Push Sweeper Light weight for easy use! Ultra quiet operation! Also Available: BIS-BG477

PRECLEANER SPOT & STAIN CLEANING BIS-19X6 REMOVER FORMULA 32 oz. Heavy duty BIS-97W7 BIS-31B-6 solution penetrating carpet 128 oz. Big Green 32 oz. to remove embedded dirt. oxygen activated Complete acts as a Perfect for deep cleaning. stain remover easily stain protector, de- eliminates deep down odorizer & de-foamer. stains. Great for carpet cleaning machines.

37 Ventilation and Air Flow

AIRMOVER DEHUMIDIFIERS Vortex Axial Fan Powerful and Portable DRIF174-BLU Dri-Eaz® dehumidifiers are designed to deliver maximum Ventilates up to 125 feet of Sto&Go water removal performance and remain extremely portable. ducting. The Vortex uses a 12" axial 1200 Refrigerant Dehumidifier - DRIF203 fan blade to pull musty air out or The DrizAir 1200 dehumidifier has all the propel fresh air in to inaccessible convenient features of its larger cousins areas. It's also an ideal choice for in a compact and extremely portable size. drying large open areas like gyms, Removes up to 15 gallons a day. concrete pads, hallways, etc. Powerful 1.0 hp motor. Operate standalone or Filter for Model 1200 with Sto&Go ducting. Dehumidifier - DRIF276 Easy to carry & stackable!

12” X 25’ Air Duct In A Bag LGR 3500i Dehumidifier - DRIF411 DRI1000 Delivers supersized performance – more • Built-in bag with sturdy handle than any other dehumidifier in its class. contains and protects ducting Dominant performance: 170 pints during transport and storage. (AHAM) and 240 pints (90°/90% • Semi-rigid ducting constructed RH) – leads in the XL category in with spring steel wire. Xactimate. Digital control panel • Made of PVC-coated polyester displays plain English, not codes. fabric. Replacement Filters Available

LGR 7000 XLI Dehumidifier - DRIF412 AIRMOVER Removes more water than any other dehumidifier in its category. Sahara TurboDryer® - DRIF351 Max. water removal at saturation The professional airmover of choice 235 pints | 111 liters / day for top restorers. It has everything you need for effective structural drying, like Filter for Model 1200 low amp draw, high-velocity airflow and Dehumidifier - DRIF276 multiple operating positions. Up to 2700 CFM. Two speeds and four positions. AIR SCRUBBER DefendAir HEPA 500 AIRMOVER Air Scrubber/Negative Air Machine Velo™ Slim-Line Floor High efficiency air filtration with a small Drying Fan footprint! Combines advanced clean DRIF504 air performance with the ultimate, most Powerful airmover delivers functional features to help make the restoration-grade air movement restorer's job easier. Built-in MICROBAN® in a highly portable package. antimicrobial product protection to inhibit Weighs in at only 21 lbs. and growth of bacteria, mold, and mildew stackable up to five high. that can cause stains, odors, and product deterioration. Air movement: 885 CFM. Replacement Filter for 500 Air Scrubber - DRIF271

SPOT AIRMOVER COOLER Ace TurboDryer® - DRIF259 Today's ISDT-compliant airmover

should be versatile, so the Ace Tiltable Model features 7 different positions. It should be powerful, so the Ace Versa-Kool® Mobile Spot Cooler features 2000 CFM (Tested). It Patented design provides more should also be energy-conscious, powerful air flow. Cooling capacity so the Ace draws an amazingly of over 11,000 cfm. Rugged white polyethylene housing. low 1.5 amps. Stackable for Totally enclosed 115/230v ball bearing motor. operation and storage. 7 different positions for SCHVS36VKM 36" Mobile Versa-Kool Spotcooler everyday drying SCHVS36VKT 36" Tiltable Versa-Kool Fan

38 Electrical & Lighting

LED BULBS WOBBLE LIGHT VOL08-00025 400 Watt Metal Halide. 36" Tall. Virtually Save money with energy indestructible. It has an impact-resistant efficiency! 850 lumen, body and counter-weighted hemispherical 10wt, 6,500K. base, that quickly & automatically returns the light upright if knocked over. ROUGH SERVICE BULBS CCI02-05903 100 Watt Rough Service Incandescent Light Bulbs 4-Pack

LIGHT STRING The perfect solution to your temporary lighting needs at locations such as construction sites, parking lots, marinas WOBWL400MH 400 Watt Wobble Light WOBD052197 400 Watt Replacement Bulb and/or auto and tree lots. WL52230 Wobble Light Reflection Shield Heavy-duty metal cage light.

CCI02-07538 50’ 12/3 Light String with Metal Cages CCI02-07539 100’ 12/3 Light String with Metal Cages WORK LIGHTS

24 LED Rechargeable Work Light (800 Lumens) IN-LINE GFCI CCI02-L1320 2’ GFCI Adapter - 12 Amp. Features high power SMD LEDs, wide 90 CCI03-14880-023-6 degree angle light distribution, quick head 2’ GFCI Adapter - 15 Amp. adjustment, and low heat. CCI03-14880-023-6 Ground fault circuit interrupters protect from an electrical shock resulting from 500 Watt Work Light an unequal flow of electricity. CCI02-L33 All of our fixtures utilize a 500 watt EXTENSION CORDS quartz halogen light bulb (included) which emits a brighter, whiter, light. Voltec extension cords stay flexible and are UL and UL listed. These outdoor extension cords 500 Watt Work are perfect for outdoor Light with Stand use. Lighted ends. 1000 Watt Twin CCI02-L10 Work Light With Stand CCI02-L14 12 Gauge 10 Gauge CCI01-01687 25’ Rubber 12/3 Blue Ext. Cord w/ Lighted Ends CCI01-01688 50’ Rubber 12/3 Blue Ext. Cord w/ Lighted Ends CCI01-01689 100’ Rubber 12/3 Blue Ext. Cord w/ Lighted Ends CCI01-01788 50’ Ext. Cord 10 Ga. Yellow/Black w/ Lighted Ends HALOGEN BULBS CCI01-01789 100’ Ext. Cord 10 Ga. Yellow/Black w/ Lighted Ends PEL-15-500W 6 Pack of Halogen Bulbs MAGNETIC FLASHLIGHTS 500 Watts with plastic storage case. Magnetic Stick Light SENMSL-1 Extendable Magnetic WORKLIGHT Flashlight Dual Worklight with Belt Holder SENEMF-1 SENDWL-1 Mid section opens up to work light. Super strong base magnet allows for any mounting on walls to tables.

39 Electrical & Lighting

LIGHT LED LIGHT BARS FLOOD TOWER LIGHT

VM Version

LED Mini-Bar Strong LED's with 18 flash patterns. Available for VM model features 15’ cable and 750 Lumen High/ 440 Lumen Low. SALE OR RENT! cigarette plug. Up to 10.5 hours of continuous illu- mination with a 4.0Ah Battery on low. LED Mini-Bar Amber Light ECO5585A LED Mini-Bar With Vacuum ECO5585A-VM LED Flood Light DML805 Tri-pod Stand GM00001381

BEACONS LED EXTENDED LIGHT

Long maintenance free service life and low amp draw. VM model features 15’ cable and cigarette plug.

LED Beacon - Screw Mount ECO7965A LED Beacon with Vacuum ECO7965A-VM Night Light Pro2 Light Tower ALM-NLPRO2 M18 TRUEVIEW LED Stand Light Up to 65 hr. without refueling, 30 Gal fuel. WORK Easy 4 point stabilization design. 2130-20 Four-point design | Remains operational Sets up in five seconds and lasts for hours. LANTERN in wind gusts up to 65 mph. 3 light modes with up to 2000 lumens of light output.

ECOEW2461-NA BLUETOOTH LED High intensity 600 lumen flood beam. (100%, 30% & SOS flashing modes). LIGHT KIT Operates 3-4 hrs before recharging Cigarette socket and AC wall charg- ing leads are supplied.

WORK LAMPS JOBSITE LIGHT

LED work lamp featuring a flood beam.

LED Worklamp - Bolt Mount ECOE92006 LED Worklamp - Magnetic ECOE92007-MG FLEXVOLT 60-Volt MAX Lithium Ion Cordless/Corded BACK UP ALARM DEWDCL070T1 Syslite DUO Light Set W/Tripod Vehicle Back Up Alarm On-board charger with door lock option. FES01-574657 LED MAX Lumens of 7000, with dimming ECO510 Compact size, built in cord wrap and a option as low as 500 lumens. Compact size and universal top handle for an easy carry. Plug in additional lights or corded tools. mounting bracket. Big light output for a small compact light.

40 Winter Jobsite

PORTABLE LP HEATERS DUCTABLE HEATER HEATERS

Available for SALE OR RENT!

Tradesman Forced Air LP Heaters Features a unique 3-trial ignition system, the industry's heaviest gauge 1.5 Mill. BTU Direct Fired Heater combustion chamber & burner plate. Perfect for small, hard to reach areas, with Regulator - AIRRM1/1.5DFG as well as large construction Self Diagnostic Service Saver models applications that require directed heat. for convenient trouble-shooting. Made to withstand harsh environment. Delivers clean, worry-free heat.

170,000 BTU Dual Fuel w/ Thermostat 100,000 BTU LP LBW-TRADESMAN100 LBW-PREMIER 170DF 155,000 BTU LP LBW-TRADESMAN155 12” X 12’ Duct Kit for 170 DF LBW-26346 170,000 BTU LP LBW-TRADESMAN170 350,000 BTU LP/Natural Gas 400,000 BTU LP LBW-TRADESMAN170 LBW-PREMIER 350DF 18” X 12’ Duct Kit for 350DF LBW-22835

THERMOSTAT 400,000 BTU Direct Fired Heater In-Line Electric Thermostat KEROSENE HEATER with Regulator - AIRRM400DFG WH00831 LB White® Gas Fired Industrial Heaters Thermostat Natural gas/propane, low pressure. comes complete with 25' cord. 2 Position quick changeover valve. Remote mount. Frame for stacking & handling. Recommended Available for to use with all LB 1” x 50’ 350# LP Gas Line AIR1000 White® Ag Heaters. SALE OR RENT! 1” x 100’ 350# LP Gas Line AIR2000 LBW-TRADESMAN #K175 Heater 175,000 BTU with Thermostat Kerosene, #1/#2 Diesel, #1 Fuel Oil. Offers the ultimate in efficient, Available for portable construction heat. SALE OR RENT! Features spark ignition for sure starts. Thermostatic control for automatic operation & consistent temperature.

CONVECTION HEATER

HEATING SYSTEM Heat only the areas you want. Great THAWZALL™ HEAT MACHINE is a source of safe & quiet heat at the total heating system on wheels - construction site. Thaws, Cures. and Heats! Emergency Heat Source - can connect directly into down boiler heating An economical way to thaw frozen system. WH341 Norseman 250 LP Gas Salamander Heater with Regulator ground and keep your crews working Safe- No open flame. year ’round. Efficient oil-fired boiler heats Offers easy to use, highly efficient Thaws up to 12 inches of frost per transfer fluid which is pumped through heat with no electricity needed. 24hr period. hydronic hoses. Completely portable. Automatic & consistent temperature.

41 Winter Jobsite

TORCHES ICE MELT SPREADERS

LP Gas Torchman 500 500,000 BTU - WH171 Durable steel construction. Known for their reliability, durability and serviceability in the field. Does not include regulator. Ice-Trax™ Premium Ice Melt 100 Lb. Capacity Spreader with DOW3000 Stainless Steel Frame Specifically formulated to give CH82108 protection and effective melting power Professional stainless steel push to ten below zero. Blue colorant spreader. Enclosed metal gears to Cast Iron Head Torch allows even spreading assuring proper withstand the elements. Solid steel 500,000 BTU - WH169 coverage with less waste. 50 lb. Bag. linkage opens and closes the gate in Ideal for brush burning, thawing incremental steps. Stainless steel grate pipes, roofing applications and more! and rain cover included. Includes Regulator. ROCK SALT SCOOP SHOVEL

12" Aluminum Scoop Shovel AS16812 80 Lb. Capacity Spreader Diamond Crystal CH80088 Full size power D Grip. Winter Melt Rock Salt Auger helps agitate product and Aluminum allow blade for strength. DOW4000 minimize clumping. 26% larger gate Made with pure salt, Winter Melt® Ice opening to allow product to flow Melter is the natural choice to melt smoothly. Adjustable 360˚ salt baffle SNOW PUSHER ice in temperatures as low as 5 °F / system helps spread salt only where -15 °C. Always a cost-effective way to you want it. 12” Fully pneumatic tires maintain your driveways, sidewalks and easily handle rough terrain. Grate and walkways on icy, cold days. 50 lb. Bag. rain cover included.

COLD-WEATHER INSULATED BLANKET PATCH

Power Pusher Snow Shovel SRPP100 Designed to push snow rather than lift. Handle allows user to stand straight.

Usable down to Closed-Cell Insulated Blanket is tough, -20° F. easy to use- built to take abuse, use ICE SCRAPER and re-use. On job after job, the long- Pro-Poxy AWP .45 Cu. Ft. Kit lasting core of soft closed-cell foam UNXAWP with thousands of tiny insulating air A rapid setting, 100% solids, high pockets, prevents fresh concrete’s heat strength, all-weather spall repair and of hydration from escaping too quickly. patching material for concrete. Pro-Poxy AWP uses a unique hybridized MK0700 6’ X 25’ 2 Layer (3/8”) Ice Scraper epoxy urethane system and an MK0700-01 6’ X 25’ 3 Layer (3/8”) AS16463 (#78202) engineered aggregate with a moisture MK0706 6’ x 25’ 3 Layer (5/8”) 48" wood handle, 7" x 6" Blade. scavenger for superior performance in MK0706-01 6’ X 25’ 5 Layer (5/8”) MK0708 6’ x 25’ 5 Layer all conditions.

42 Winter Jobsite

SPREADERS ELECTRIC BLANKET INSULATED BLANKET HEATING ROD

6’ x 25’

Made in U.S.A. Volcano Sand Pile Heater Made in Never delay a project due to cold U.S.A. HEALL16JX2B weather. Heat spreading technology 1) Heat from the ground below the cures concrete quickly. Closed-Cell Insulated Blanket-built to sand pile moves up through the sand Prevents freezing, rapid drying, & take abuse, use and re-use. 2) Heat radiates from the water barrel cracking. Thaw prior to concrete pour. Thousands of tiny insulating air in the center of sand pile. pockets, prevents fresh concrete’s heat 3) heat lost through the top forms a 3’ X 25’ Extra Hot POWEH0325 of hydration from escaping too quickly. heated air shield between the whole 6’ X 12’ Extra Hot POWEH0612 top surface of the sand and the tarp. 3’ X 25’ Multi-Duty POWMD0325NH 1/2" Ins. Blanket - 6' x 25' MK001 Measuring only 16" x 38" x 1" and 6’ X 12’ Multi-Duty POWMD0612NH 3/4" Ins. Blankets - 6' x 25' MK002 weighing less than 5 pounds, it can fit 6’ X 25’ Multi-Duty POWMD0625 behind the seat of a pickup truck.

DRUM WARMER TOTE HEATER CYLINDER HEATER

Made in Made in Made in U.S.A. U.S.A. U.S.A.

POWTH275 Maintains desired temperature through Fits 275 gallon IBC totes and include an evenly heated area. POWGCW100 an adjustable thermostatic controller. 55 Gal. Drum Warmer Keeps chemicals and other industrial Saves money by optimizing the gas with Adjustable Temp POWBH55-PRO materials within customer-defined temperature and increasing the 55 Gal. Drum Warmer POWBH55-RR temperature ranges. vaporization rate.

Farrell Equipment & WARMING BAG WARMING WRAP Supply Co., Inc. - Trade Customs The compilation and checking of a general catalog of supplies and machinery is complicated, involving many thousands of product numbers, dimensions, etc. and absolute perfection is not a commercial 120 VAC, possibility. Every endeavor has been made to have the latest lists, dimensions, descriptions and designs throughout this catalog, but 50 Watts we do not guarantee accuracy. If any errors or misprints have escaped our checkers and printers, we are not responsible for them, and they are subject to our correction. All information contained in this catalog, pertaining to strengths and proper working loads of Caulk Warmer Bag - REA-WB60908 material, tools or machines is derived from information compiled by the manufacturers for the convenience of the buyer. We assume (18" H x 15" W x 3"). Holds: 12 standard 5 Gallon Cylinder - REA-0609-PLWC no responsibility for the accuracy of this information. caulk tubes, 7 quart size caulk tubes, Plugs into 120v ac. Heavy duty Manufacturers are constantly changing designs, specifications and 7 sausage size caulk tubes, 12 grease industrial cord. accessories on many items and these are subject to change without notice. Illustrations are subject to modification. cartridges, 8 cans foam, 12 rolls sealing Velcro closure with cinch straps.  All references in this catalog are for description only and are not tape. Maintains caulk at 80° even if the Internal temperature controlled to representations or warranties of any kind or nature. outside temperature drops to -13°. maintain constant temperature. Copyright © 2017 by Farrell Equipment & Supply, Inc. Printed in U.S.A. 4000-080717

43 Other Available Farrell Catalogs:

Blade & Fastener Book Decorative Concrete Book Concrete Book Erosion Control Book Masonry Book

Equipment & Supply Co., Inc.

Measuring & Marking Book Safety Book Woodworking Book Rental Book Rental Concrete Stamps

Equipment & Supply Co., Inc.

EAU CLAIRE 715-835-4334 800-533-0909 WAUSAU Visit us at any of our Fax: 715-835-4356 715-355-8300 1510 N. Hastings Way 800-933-5939 Eau Claire, WI 54703 Fax: 715-298-1662 Locations! 7405 Commerce Drive 6 Weston, WI 54476 APPLETON All our catalogs are 920-903-1985 available online! Fax: 920-903-8278 1002 Truman Street ROCHESTER Kimberly, WI 54136 507-252-0234 888-533-8909 Fax: 507-252-0222 LA CROSSE MADISON 1635 3rd Avenue S.E. 608-222-5372 Rochester, MN 55904 608-796-9300 888-533-0909 888-533-7909 Fax: 608-796-9435 Fax: 608-222-5405 508 Monitor Street 6809 Mangrove Lane La Crosse, WI 54603 Monona, WI 53713

www.FarrellEquipment.com

For Your Convenience We Accept:

Printed in U.S.A. on recyclable paper with soy-based ink.