Office 2007 – Word – Inserting Filename and Path

Office 2007 – Word – Inserting Filename and Path Often times when working with documents, users may want to include the file path in the header or footer of documents. Insert file path using template Using a template provided by a Microsoft Word 2007 user, it is easy to install the building blocks necessary to insert file name and path into a document easily. Below are directions to install the building blocks using the template: 1. Click on the following link: http://office.microsoft.com/en-us/templates/TC300002951033.aspx?pid=CT101446261033 2. You may be prompted to validate your Office 2007 installation. Follow the on-screen directions and complete this procedure. Once finished you will be able to download the template file. Click download now to retrieve and open the file on your computer. 3. Upon opening the file, you will be provided instructions to complete the process. The next few lines will include screen shots of the process to aid in installation. 4. On the Insert tab, click Header 5. Locate the building block named File and Path 6. Right click the building block and click Edit Properties 7. In the Save In list select Building Blocks.dotx, and then click OK 8. Repeat steps 2 through 4 for the File Name And Path Building Blocks located in the Footer gallery. After you do all this close out of Word and click Yes until you get out of the document. Open a Word document that you would like to insert a file path for and go to the Insert tab and click on Header. Choose Filename and Path. This should insert the filename and path for the document you are working in. .

Copy Link

Recommended publications

Configuring UNIX-Specific Settings: Creating Symbolic Links : Snap
Configuring UNIX-specific settings: Creating symbolic links Snap Creator Framework NetApp September 23, 2021 This PDF was generated from https://docs.netapp.com/us-en/snap-creator- framework/installation/task_creating_symbolic_links_for_domino_plug_in_on_linux_and_solaris_hosts.ht ml on September 23, 2021. Always check docs.netapp.com for the latest. Table of Contents Configuring UNIX-specific settings: Creating symbolic links . 1 Creating symbolic links for the Domino plug-in on Linux and Solaris hosts. 1 Creating symbolic links for the Domino plug-in on AIX hosts. 2 Configuring UNIX-specific settings: Creating symbolic links If you are going to install the Snap Creator Agent on a UNIX operating system (AIX, Linux, and Solaris), for the IBM Domino plug-in to work properly, three symbolic links (symlinks) must be created to link to Domino’s shared object files. Installation procedures vary slightly depending on the operating system. Refer to the appropriate procedure for your operating system. Domino does not support the HP-UX operating system. Creating symbolic links for the Domino plug-in on Linux and Solaris hosts You need to perform this procedure if you want to create symbolic links for the Domino plug-in on Linux and Solaris hosts. You should not copy and paste commands directly from this document; errors (such as incorrectly transferred characters caused by line breaks and hard returns) might result. Copy and paste the commands into a text editor, verify the commands, and then enter them in the CLI console. The paths provided in the following steps refer to the 32-bit systems; 64-bit systems must create simlinks to /usr/lib64 instead of /usr/lib.
[Show full text]
Mac Keyboard Shortcuts Cut, Copy, Paste, and Other Common Shortcuts
Mac keyboard shortcuts By pressing a combination of keys, you can do things that normally need a mouse, trackpad, or other input device. To use a keyboard shortcut, hold down one or more modifier keys while pressing the last key of the shortcut. For example, to use the shortcut Command-C (copy), hold down Command, press C, then release both keys. Mac menus and keyboards often use symbols for certain keys, including the modifier keys: Command ⌘ Option ⌥ Caps Lock ⇪ Shift ⇧ Control ⌃ Fn If you're using a keyboard made for Windows PCs, use the Alt key instead of Option, and the Windows logo key instead of Command. Some Mac keyboards and shortcuts use special keys in the top row, which include icons for volume, display brightness, and other functions. Press the icon key to perform that function, or combine it with the Fn key to use it as an F1, F2, F3, or other standard function key. To learn more shortcuts, check the menus of the app you're using. Every app can have its own shortcuts, and shortcuts that work in one app may not work in another. Cut, copy, paste, and other common shortcuts Shortcut Description Command-X Cut: Remove the selected item and copy it to the Clipboard. Command-C Copy the selected item to the Clipboard. This also works for files in the Finder. Command-V Paste the contents of the Clipboard into the current document or app. This also works for files in the Finder. Command-Z Undo the previous command. You can then press Command-Shift-Z to Redo, reversing the undo command.
[Show full text]
Powershell Integration with Vmware View 5.0
PowerShell Integration with VMware® View™ 5.0 TECHNICAL WHITE PAPER PowerShell Integration with VMware View 5.0 Table of Contents Introduction . 3 VMware View. 3 Windows PowerShell . 3 Architecture . 4 Cmdlet dll. 4 Communication with Broker . 4 VMware View PowerCLI Integration . 5 VMware View PowerCLI Prerequisites . 5 Using VMware View PowerCLI . 5 VMware View PowerCLI cmdlets . 6 vSphere PowerCLI Integration . 7 Examples of VMware View PowerCLI and VMware vSphere PowerCLI Integration . 7 Passing VMs from Get-VM to VMware View PowerCLI cmdlets . 7 Registering a vCenter Server . .. 7 Using Other VMware vSphere Objects . 7 Advanced Usage . 7 Integrating VMware View PowerCLI into Your Own Scripts . 8 Scheduling PowerShell Scripts . 8 Workflow with VMware View PowerCLI and VMware vSphere PowerCLI . 9 Sample Scripts . 10 Add or Remove Datastores in Automatic Pools . 10 Add or Remove Virtual Machines . 11 Inventory Path Manipulation . 15 Poll Pool Usage . 16 Basic Troubleshooting . 18 About the Authors . 18 TECHNICAL WHITE PAPER / 2 PowerShell Integration with VMware View 5.0 Introduction VMware View VMware® View™ is a best-in-class enterprise desktop virtualization platform. VMware View separates the personal desktop environment from the physical system by moving desktops to a datacenter, where users can access them using a client-server computing model. VMware View delivers a rich set of features required for any enterprise deployment by providing a robust platform for hosting virtual desktops from VMware vSphere™. Windows PowerShell Windows PowerShell is Microsoft’s command line shell and scripting language. PowerShell is built on the Microsoft .NET Framework and helps in system administration. By providing full access to COM (Component Object Model) and WMI (Windows Management Instrumentation), PowerShell enables administrators to perform administrative tasks on both local and remote Windows systems.
[Show full text]
Where Do You Want to Go Today? Escalating
Where Do You Want to Go Today? ∗ Escalating Privileges by Pathname Manipulation Suresh Chari Shai Halevi Wietse Venema IBM T.J. Watson Research Center, Hawthorne, New York, USA Abstract 1. Introduction We analyze filename-based privilege escalation attacks, In this work we take another look at the problem of where an attacker creates filesystem links, thereby “trick- privilege escalation via manipulation of filesystem names. ing” a victim program into opening unintended files. Historically, attention has focused on attacks against priv- We develop primitives for a POSIX environment, provid- ileged processes that open files in directories that are ing assurance that files in “safe directories” (such as writable by an attacker. One classical example is email /etc/passwd) cannot be opened by looking up a file by delivery in the UNIX environment (e.g., [9]). Here, an “unsafe pathname” (such as a pathname that resolves the mail-delivery directory (e.g., /var/mail) is often through a symbolic link in a world-writable directory). In group or world writable. An adversarial user may use today's UNIX systems, solutions to this problem are typ- its write permission to create a hard link or symlink at ically built into (some) applications and use application- /var/mail/root that resolves to /etc/passwd. A specific knowledge about (un)safety of certain directories. simple-minded mail-delivery program that appends mail to In contrast, we seek solutions that can be implemented in the file /var/mail/root can have disastrous implica- the filesystem itself (or a library on top of it), thus providing tions for system security.
[Show full text]
An Incremental Path Towards a Safer OS Kernel
An Incremental Path Towards a Safer OS Kernel Jialin Li Samantha Miller Danyang Zhuo University of Washington University of Washington Duke University Ang Chen Jon Howell Thomas Anderson Rice University VMware Research University of Washington LoC Abstract Incremental Progress Tens of Linux Safe Linux Linux has become the de-facto operating system of our age, Millions FreeBSD but its vulnerabilities are a constant threat to service availabil- Hundreds of Singularity ity, user privacy, and data integrity. While one might scrap Thousands Biscuit Linux and start over, the cost of that would be prohibitive due Theseus Thousands RedLeaf seL4 to Linux’s ubiquitous deployment. In this paper, we propose Hyperkernel Safety an alternative, incremental route to a safer Linux through No Type Ownership Functional proper modularization and gradual replacement module by Guarantees Safety Safety Verification module. We lay out the research challenges and potential Figure 1: Our vision and the current state of systems. solutions for this route, and discuss the open questions ahead. security vulnerabilities are reported each year, and lifetime CCS Concepts analysis suggests that the new code added this year has intro- duced tens of thousands of more bugs. ! • Software and its engineering Software verification; While operating systems are far from the only source of se- ! • Computer systems organization Reliability. curity vulnerabilities, it is hard to envision building trustwor- Keywords thy computer systems without addressing operating system correctness. kernel safety, verified systems, reliable systems One attractive option is to scrap Linux and start over. Many ACM Reference Format: past works focus on building more secure and correct op- Jialin Li, Samantha Miller, Danyang Zhuo, Ang Chen, Jon Howell, erating systems from the ground up: ones based on strong and Thomas Anderson.
[Show full text]
Simple File System (SFS) Format
Simple File System (SFS) Format Version SFS-V00.01 The SFS is a simple file system format optimized for writing and for low overhead.. The advantages of this format are: • Event navigation is possible using simple content-independent file system like functions. • Very low overhead. No loss due to block size granularity • Entire valid file system can be created by appending content On the other hand, random access directory navigation is rather slow because there is no built-in indexing or directory hierarchy. For a 500MB file system containing files with 5k bytes this represents an initial search overhead of ~1-2 sec (~100,000 seeks). SFS Structure The structure of a SFS file is as follows VolumeSpec Head File1 File1 Binary Data File2 File2 Binary Data ... ... Tail VolumeSpec: This is simply a 12 byte character string representing filesystem version. For example: “SFS V00.01” Head: This is a short header record. The byte order only applies to the time field of this record. type = “HEAD” byte_order = 0x04030201 time File: The File records are a variable length record containing information about a file. type = “FILE” byte_order = 0x04030201 Sz head_sz attr reserved name.... name (continued).... “byte_order” corresponds only to this header. The endiness of the data is undefined by SFS “sz” corresponds to the datafile size. This may be any number, but the file itself will be padded to take up a multiple of 4 bytes “head_sz” this must be a multiple of 4 “attr” SFS_ATTR_INVALID: file deleted SFS_ATTR_PUSHDIR: push current path to path stack SFS_ATTR_POPDIR: pop current path from path stack SFS_ATTR_NOCD: this record doesn’t reset the basedir “name” the name of the file.
[Show full text]
A Plethora of Paths
A Plethora of Paths Eric Larson Seattle University [email protected] Abstract A common static software bug detection technique is to use path simulation. Each execution path is simulated using symbolic variables to determine if any software errors could occur. The scalability of this and other path-based approaches is dependent on the number of paths in the pro- gram. This paper explores the number of paths in 15 differ- ent programs. Often, there are one or two functions that contribute a large percentage of the paths within a program. A unique aspect in this study is that slicing was used in dif- ferent ways to determine its effect on the path count. In par- ticular, slicing was applied to each interesting statement individually to determine if that statement could be analyzed without suffering from path explosion. Results show that slic- ing is only effective if it can completely slices away a func- tion that suffers from path explosion. While most programs had several statements that resulted in short path counts, slicing was not adequate in eliminating path explosion occurrences. Looking into the tasks that suffer from path explosion, we find that functions that process input, produce stylized output, or parse strings or code often have signifi- Figure 1. Sample Control Flow Graph. cantly more paths than other functions. a reasonable amount of time. One technique to address path 1. Introduction explosion is to use program slicing [11, 20] to remove code not relevant to the property being verified. Static analysis is an important tool in software verifica- Consider the sample control flow graph in Figure 1.
[Show full text]
File Manager
File Manager 2016.12 Rev. 1.0 Contents 1.Introduction....................................................................................1 1-1.Overview .........................................................................................................1 1-2. System Requirements and Restrictions .......................................................1 2.Installation on Windows PC ...........................................................2 2-1.Installation......................................................................................................2 2-2.Uninstallation.................................................................................................4 3.How to use RSD-FDFM ..................................................................5 3-1.How to proceed with format CF media..........................................................6 3-2.How to proceed with writing data to CF media ............................................8 3-3.How to create files/folders at CF media.......................................................11 3-4.How to delete files/folders at CF media.......................................................14 3-5.How to save files/folders at CF media .........................................................15 3-6.A list of error messages of RSD-FDFM .......................................................16 *All trademarks and logos are the properties of their respective holders. *The specifications and pictures are subject to change without notice. 1.Introduction Thank you for purchasing file
[Show full text]
When Powerful SAS Meets Powershell
PharmaSUG 2018 - Paper QT-06 ® TM When Powerful SAS Meets PowerShell Shunbing Zhao, Merck & Co., Inc., Rahway, NJ, USA Jeff Xia, Merck & Co., Inc., Rahway, NJ, USA Chao Su, Merck & Co., Inc., Rahway, NJ, USA ABSTRACT PowerShell is an MS Windows-based command shell for direct interaction with an operating system and its task automation. When combining the powerful SAS programming language and PowerShell commands/scripts, we can greatly improve our efficiency and accuracy by removing many trivial manual steps in our daily routine work as SAS programmers. This paper presents five applications we developed for process automation. 1) Automatically convert RTF files in a folder into PDF files, all files or a selection of them. Installation of Adobe Acrobat printer is not a requirement. 2) Search the specific text of interest in all files in a folder, the file format could be RTF or SAS Source code. It is very handy in situations like meeting urgent FDA requests when there is a need to search required information quickly. 3) Systematically back up all existing files including the ones in subfolders. 4) Update the attributes of a selection of files with ease, i.e., change all SAS code and their corresponding output including RTF tables and SAS log in a production environment to read only after database lock. 5) Remove hidden temporary files in a folder. It can clean up and limit confusion while delivering the whole output folder. Lastly, the SAS macros presented in this paper could be used as a starting point to develop many similar applications for process automation in analysis and reporting activities.
[Show full text]
Apple File System Reference
Apple File System Reference Developer Contents About Apple File System 7 General-Purpose Types 9 paddr_t .................................................. 9 prange_t ................................................. 9 uuid_t ................................................... 9 Objects 10 obj_phys_t ................................................ 10 Supporting Data Types ........................................... 11 Object Identifier Constants ......................................... 12 Object Type Masks ............................................. 13 Object Types ................................................ 14 Object Type Flags .............................................. 20 EFI Jumpstart 22 Booting from an Apple File System Partition ................................. 22 nx_efi_jumpstart_t ........................................... 24 Partition UUIDs ............................................... 25 Container 26 Mounting an Apple File System Partition ................................... 26 nx_superblock_t ............................................. 27 Container Flags ............................................... 36 Optional Container Feature Flags ...................................... 37 Read-Only Compatible Container Feature Flags ............................... 38 Incompatible Container Feature Flags .................................... 38 Block and Container Sizes .......................................... 39 nx_counter_id_t ............................................. 39 checkpoint_mapping_t ........................................
[Show full text]
The OS/2 Warp 4 CID Software Distribution Guide
SG24-2010-00 International Technical Support Organization The OS/2 Warp 4 CID Software Distribution Guide January 1998 Take Note! Before using this information and the product it supports, be sure to read the general information in Appendix D, “Special Notices” on page 513. First Edition (January 1998) This edition applies to OS/2 Warp 4 in a software distribution environment and to NetView Distribution Manager/2 (NVDM/2) with Database 2 (DB2) Version 2.11 for OS/2 and Tivoli TME 10 Software Distribution 3.1.3 for OS/2 (SD4OS2) software distribution managers. This edition also applies to OS/2 Warp 4 subcomponents, such as TCP/IP 4.0, MPTS, NetFinity 4.0, Peer Services, and LAN Distance, and to OS/2- related products, such as eNetwork Personal Communications for OS/2 Warp, eNetwork Communications Server for OS/2 Warp, Transaction Server, Lotus Notes, and Lotus SmartStuite 96 for OS/2 Warp. Comments may be addressed to: IBM Corporation, International Technical Support Organization Dept. DHHB Building 045 Internal Zip 2834 11400 Burnet Road Austin, Texas 78758-3493 When you send information to IBM, you grant IBM a non-exclusive right to use or distribute the information in any way it believes appropriate without incurring any obligation to you. © Copyright International Business Machines Corporation 1998. All rights reserved Note to U.S Government Users – Documentation related to restricted rights – Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp. Contents Figures. .xiii Tables. xvii Preface. .xix How This Redbook in Organized .
[Show full text]
Software Product Description
Software Product Description PRODUCT NAME: PATHWORKS for VMS, Version 4.0 SPD 30.50.07 (Formerly VMS Services for pes) DESCRIPTION • PATHWORKS for DOS (TCP/IP) - Software required for a personal computer running the DOS Operat PATHWORKS for VMS is based on the Personal Com ing System to access services of a PATHWORKS puting Systems Architecture (PCSA), which is an ex for VMS or PATHWORKS for ULTRIX server via tension of Digital Equipment Corporation's systems and the TCP/IP network transport. (Described in SPD networking architecture that merges the VAX, RISC and 33.45.xx.) personal computer environments. The PATHWORKS product family, developed under the PC SA architecture, • DECnetlPCSA Client: VAXmate - Required software provides a framework for integrating personal comput for VAXmates to use the facilities provided by PATH ers into an organization's total information system so WORKS for VMS. (Described in SPD 55.10.xx.) that different types of users can share information and PATH WORKS for VMS software allows VAX, MicroVAX, network services across the entire organization. VAXstation and VAXserver computers to act as applica The PATHWORKS family of software products includes: tion, data and resource servers to groups of personal computers. By using these server systems, personal • PATHWORKS for VMS - Software that allows a VMS computers can share applications, data and resources. based VAX system to act as a file, print, mail and Information can be accessed from local and remote sys disk server to DOS and OS/2® personal computers. tems and that information can be applied in DOS or (Described in this document.) OS/2 applications.
[Show full text]