A619-200MK Munster Koach Instr FRONT

Presents A619-200MK

AUTHENTIC

1/25TH SCALE MODEL

READ THIS BEFORE YOU BEGIN The Munster Koach was custom built by GEORGE BARRIS for that wildest of all TV Families, THE MUNSTERS. The Koach is composed of various roadster and hearse parts. The coffin nose has four casket handles from a famous Hollywood cemetery. Power is supplied by a COBRA engine, sporting 10 (count ‘em!) carbs. We understand that the Koach runs best at night during thunderstorms. Before assembling, a few things you should do. Look over the instructions and CARBS AND MANIFOLD ASSEMBLY (C) identify the parts and their various locations. Now carefully paint all interior parts 6 red; this includes inside roof, the two bucket seats, the firewall, the jump seat and the engine halves. While waiting for the paint to dry you can trim any excess plastic from the other parts. Also scrape the chrome plating from the parts where they are to be joined. 5 This will enable the parts to adhere to each other more easily. The enclosed decal has all the trim details of the actual Munster Koach with VALVE COVERS (C) several optional crests and many extras which may be applied if you desire. By now you should be ready to start assembling your model. Just FOLLOW THE NUMBERS, as the parts are sequenced in order of assembly. Use just enough cement to join plastic parts, and be especially careful not to smear cement on exposed GENERATOR AND PULLEY ASSEMBLY surfaces. 3

1 CEMENT ENGINE HALVES TOGETHER

9 2 REAR TIRES (2 pcs.) 7

ENGINE TO CHASSIS

2 FRONT COVER 4 FAN

2 METAL AXLES (Install in chassis)

10 11 4 WHEELS (C) 2 FRONT TIRES (2 pcs.)

The Munsters is a copyright of Kayro-Vue Productions and a trademark of Universal Studios. Licensed by NBC Universal Television Consumer Products Group 2010. All Rights Reserved. George Barris, Barris Kustom Ind., Dragula are registered trademarks of Barris Kustom Ind. and are used under license to Round 2 LLC. Firestone and F Shield Logo are registered trademarks of BFS Brands, LLC and are used with permission. AMT & design is a registered trademark of Learning Curve Brands, Inc. used under license to Round 2, LLC. ©2010 Learning Curve Brands, Inc. All rights reserved. ©2010 Round 2, LLC, South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved. GEAR SHIFT (C) 2 4

2 BUCKET SEATS STEERING WHEEL 1

5 INTERIOR TO BODY 3 INSTRUMENT PANEL

(Install interior from top rear)

NUMBERS

ARE IN ORDER OF ASSEMBLY

1 NOTE: Apply decal if desired

6 7 2 LANDAU IRONS (C) 2 LANTERNS (C) WINDSHIELD (Clear) 17

18 NOTE: Apply decals to windshield before cementing to body. (See decal)

FRAME 19 2 SEAT BACK 16 RADIATOR (C) JUM P SEAT 20 3 BUL HORN (C)

4 2 SEAT BRACKETS (To rear of body) (See circled drawing for location)

5 REAR LANTERN (C)

24 9 2 REAR FENDERS CRANK (C)

12 2 SMALL STEPS 8 13 4 LARGE STEPS 10 23 Apply rear door and family crest decal now, NOTE: 4 HANDLES (C) and allow to dry. (See decal) 14 FIREWALL 2 LANTERNS (C) (2 Each Side)

11 BODY TO CHASSIS

15 2 EXHAUST HEADERS (C) (To engine through body) 21 2 LENSES (Clear) (To front lanterns)

22 NOTE: Apply decal to lanterns before cementing to chassis. (See decal) AUTHENTIC Presents 1/25TH SCALE MODEL

A619-200GD

READ THIS BEFORE YOU BEGIN

The DRAG-U-LA was built by GEORGE BARRIS for “Grandpa” on that wild While waiting for the paint to dry, you can trim excess plastic from the TV show, THE MUNSTERS. other parts. Also, scrape the chrome plating from parts where they are to be The DRAG-U-LA is composed of a fiberglass body which was actually joined. This will enable the parts to adhere to each other more easily. molded from a real coffin! The body “rests” on a dragster-type tube frame. By now you should be ready to start assembling your model. Just FOLLOW Power is supplied by a WILD 350 h.p. engine. THE NUMBERS, as the parts are sequenced in order of assembly. Use just Before assembling, a few things you should do. Look over the instructions enough cement to join plastic parts, and be especially careful not to smear and identify the parts and their various locations. Now carefully paint the cement on exposed surfaces. body gold before assembling.

Note: Without oil cap

5 2 CARBURETORS 6 (C) INDICATES CHROME PARTS “POWER RAM” INTAKE MANIFOLD 2 2 VALVE COVERS (C)

9 METAL AXLE 3 14

4 FAN BELT SEAT

FAN (C) 8

2 AXLE HOUSINGS

13 CEMENT ENGINE HALVES TOGETHER 2 EXHAUST HAND BRAKE (C) 1 7 HEADERS

CEMENT ENGINE TO CHASSIS 10

FRAME

11 FRONT AXLE (C) 2 RADIUS RODS (C) 12 BUBBLE TOP (Clear) 2 APPLY DECAL INSTRUMENT PANEL (C) 2 HEADLIGHTS (C) 15 17 GAS TANK (C) (2 pcs.) Note: This arm locates 16 AIR SCOOPS (C) (2 pcs.) STEERING WHEEL (C) through hole in body (Locate to carbs) 2 HEADLIGHT LENSES 4 (Clear) 14 DRAG CHUTE 19

3 STEERING ARM (C) 18

TOMBSTONE 7

APPLY DECAL IDLER ARM (C) Note: See detail

STEERING LINKAGE (C)

BODY 6

Steering arm CEMENT BODY TO FRAME SHIFT LEVER (C) 20 1 5 TAILLIGHT BAR (C)

ASSEMBLED FRAME

12 Assembled rear wheels (Cement to metal axle) 2 REAR SLICKS (2 pcs.) (Paint flat black) Assembled front wheels (Cement to axle) 13 2 FRONT TIRES 10 (Paint flat black) 8 2 REAR WHEELS (C) 21 11 9 2 SPOKE WHEELS (C) 2 ORGAN PIPE HEADERS (C) (Cement to exhaust header bottoms)

3 10 4 STEERING ROD 6 EXHAUST PIPE ASSEMBLED 2 REAR LIGHT (C) SURFBOARD 5 FLYWHEEL COVER

FRONT LIGHT (C)

SURFBOARD SUPPORT (Rear) 1 9 SURFBOARD SUPPORT (Front ) SURFBOARD ENGINE 8 (Locate to Taillight bar)

SURFBOARD

PROPELLER