Buckaroos Tool catalog
SADDLES, SUPPORTS, & INSULATOR TOOLS | Since 1990
1 Buckaroos,Buckaroos, Inc. Inc.| www.buckaroos.com | www.buckaroos.com | 800-969-3113 | 800-969-3113 4-2018 NEW PRODUCTS
Mini Pan Brake pg. 20
Plastic Glue Dispensers Gloves pg. 6 pg. 12
Ladder Carrier pg. 22
Digaroo pg. 24
Buckaroos® Tape Dispenser pg. 22
Pipe Calipers pg. 24
Hardened Replacement Door pg. 34
Depth Gauge Malco® Mini Offset pg. 38 Aviation Snips pg. 28
2 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 WELCOME TO BUCKAROOS!
Dear Buckaroos Tool Customers, Welcome to the 2018 Buckaroos Tool Catalog! Since our first catalog in 1995, we have strived to bring you the very best quality, selection, and most innovative tools for the mechanical insulation and HVAC trades. Those priorities combined with our passion for superior customer service has made us fortunate to be your #1 source of tools. This catalog features over 25 new products. In fact, the following products are all Buckaroos innovations: • Buckaroos Tool Display (pg. 3) • Buckaroos Digaroo™ (pg. 24) • Red Aluminum Pipe Caliper (pg. 24) • Buckaroos Cinch (pg. 8) • White Plastic Pipe Caliper (pg. 24) • Dial-A-Miter (pg. 24) Buckaroos is pleased to introduce with this catalog edition a new, colorful, “Buckaroos Tool Center” wall display as shown below. The 32” height by 16” width and two metal shelves provide the perfect amount of space to promote top selling tools with limited available space. Additionally, our patented Roundup Plus™ Saddles and CoolDry™ Insulated Saddles for chilled water and cold piping systems have created unique value that can help our distributor network stand out from the competition. We truly appreciate your continued support for Buckaroos Tools and hope this catalog contributes additional value to your business and dollars to your bottom line.
Sincerely,
Jeffrey A. Rebholz President
Tool center includes: T-13G Buckaroos® Aluminum Pipe Caliper T-1B Buckaroos® 1 pt. Metal Adhesive Gun T-1C Black Brush Tip for Metal Adhesive Gun T-1P Buckaroos® Gray 5 oz. PVC Glue Gun T-36A1 Scalloped 6” Utility Knife T-36B1 Scalloped 8” Utility Knife T-36HB Dexter® #1376-HB 6” Flexible Ham Boning Knife T-36LL SofGrip Scalloped 9” All-Purpose Knife T-45B Channellock® 8” End Cut Nippers T-4H Economy Pusher Bar Tensioner T-56DG Buckaroos® Insulation Depth Gauge T-62C Accusharp® Knife Sharpener T-63K Clauss® 8” High Leverage Sure Set Shears T-68AA Buckaroos® Red G-26 Outward Clinch Tacker T-68V4 Buckaroos® STCR 2619-1/2” Staples-Pocket Packs T-6A White Chinese Bristle Wood Brush-1” T-6C White Chinese Bristle Wood Brush-2” T-76B General® 12” Flat Leg Wing Divider T-76E Malco® Model #24 Rad Divider
Tool Center components include: 36 x 16 White Pegboard, Standard Hooks - 14, Medium Hooks - 6, 1 x 1 “C” Bracket, 6” Deep Blue Shelf, 9” Deep Blue Shelf, Buckaroos Tool Center Banner.
3 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 TABLE OF CONTENTS
Adhesive Guns ...... 6 Banding & Tensioning ...... 7 Brushes ...... 8 Books & Manuals ...... 12 Brakes ...... 20 Bungee Cords & Strapping ...... 8 Calipers ...... 24 Caulk Guns ...... 24 Circumference/Diameter Tapes & Rules ...... 22 Code Blue Pliers & Wrenches ...... 20 Crimpers ...... 10 Crimping & Beading Machines ...... 10 Dividers ...... 38 Duct Board Tools ...... 31 End Cut Nippers ...... 20 File Stones ...... 24 Flashlights ...... 12 Gloves ...... 12 Hammers ...... 12-14 Hog Ring Pliers ...... 34 Knife & Scissor Sharpeners ...... 26 Knives ...... 16-18 Ladder Accessories ...... 22 Notchers ...... 20 Rulers ...... 22 Safety Glasses ...... 12
4 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Saws ...... 14 Scribes & Gauges ...... 36 Scratch Awls ...... 24 Seamers ...... 14 Shears ...... 26 Snips ...... 26-28 Staples ...... 32-34 Tackers (Outward Clinch) ...... 32 Tackers (Stapling Pliers) ...... 34 Tape Measures ...... 22 Tongs ...... 14 Tool Carriers ...... 8 Trammel Points ...... 36 Trowels ...... 36
P OUR SHO BESTSELLERS pg. 6
pg. 7 pg. 10
pg. 16
pg. 24 pg. 28 pg. 32
5 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Adhesive guns
GrAy 5 oz. PVC Glue Gun Part # T-1P Mfg. ID 600S
• Plastic container, gray color 5 oz. oiler with straight spout • Ideal for sealing PVC jacketing and use with PVC adhesives
buckaroos® 1 PT. buckaroos® 6 oz. metal Adhesive Gun with 4” Spout adhesive gun w/rigid spout T-1B T-1G Mfg. ID 30-955 Mfg. ID 50-509CC
T-1C
buckaroos® PVC Buckaroos® Red 5 oz. Glue Dispenser PVC glue gun T-1K T-1L Mfg. ID P303A Mfg. ID P203A
buckaroos® Clear Plastic buckaroos® OVAL Clear Plastic Adhesive Dispenser Adhesive Dispenser 8 oz. T-1R 8 oz. T-1T Mfg. ID 0077-06 Mfg. ID 0136-43 12 oz. T-1S 16 oz. T-1U Mfg. ID 0077-08 Mfg. ID 00560160-02
Part # Product Name Product Description Buckaroos® 1 pt. Adhesive Gun • Ideal for rubber insulation adhesives T-1B with 4” Spout • Steel and brass internal components T-1C Black Brush Tip (sold separately) • Made exclusively to fit on the T-1B Buckaroos Adhesive Guns Buckaroos® 6 oz. Metal Adhesive • Drawn steel body with rugged epoxy finish resists rust T-1G Gun w/Rigid 6” Spout • For use with PVC adhesives for sealing PVC jacketing • Tough HDPE oil can, 350 cc (11.8 fl. oz.) capacity T-1K Buckaroos® PVC Glue Dispenser • All metal pump mechanism with 5” brass tipped metal spout/used to dispense adhesives Buckaroos® Red, 5 oz. • Tough HDPE oil can, 5 oz. capacity T-1L PVC Glue Gun • All metal pump mechanism with 5” brass tipped metal spout/used to dispense adhesives Buckaroos® Gray 5 oz. PVC Glue • Plastic container, gray color 5 oz. oiler with straight spout T-1P Gun • Ideal for sealing PVC jacketing and use with PVC adhesives Buckaroos® 8 oz & 12 oz. T-1R / T-1S • Clear plastic adhesive dispensers Clear Plastic Adhesive Dispensers Buckaroos® 8 oz & 16 oz. Oval T-1T / T-1U • Clear plastic oval adhesive dispensers Clear Plastic Adhesive Dispensers
6 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 banding & tensioning
Pistol grip tensioner Part # T-4D Mfg. ID MIP-1800
• Replacement for the Gerrard #1902-D • Strap gauge range - .015 to .023 • Strap width range - 3/8” to 3/4”
Windlass pusher tensioner coil dispenser T-4A T-4E Mfg. ID MIP-1900 Mfg. ID 400
Markwell® economy pusher bar Markwell® economy windlass tensioner tensioner T-4H T-4J Mfg. ID S-210 Mfg. ID S-240
Bandit® Hand tensioner T-4P Mfg. ID CO7569
Part # Product Name Product Description
• Replacement for the Gerrard #101 Ratchet Tensioner T-4A Windlass Pusher Tensioner • Strap gauge range-.015 to .031 - Strap width range-1/4” to 3/4” • Recommended for tank application
• Portable dispenser for 3/8” to 3/4” wide ribbon type steel binder strapping coils T-4E Coil Dispenser • Bracket holds tensioning and cutting tools and includes compartment for seals • Handle is provided for easy portability - Weighs only 15 lbs.
Markwell® Economy Pusher • Capable of banding 3/8” to 3/4” width, .020 strapping T-4H Bar Tensioner • Used for insulated piping up to a 36” diameter Markwell® Economy • Capable of banding 3/8” to 1” width, .032 strapping T-4J Windlass Tensioner • Used on larger tanks, vessels and piping • Bantam low torque tensioning tool T-4P Band-It® Hand Tensioner • For band widths ranging from 3/16” to 3/4” • Made to work in Pistol Grip, Straight or Angle Positions
7 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 brushes, tool carriers, Bungee Cords & Cinch, Strapping
brushes • Ideal for adhesives on rubber and polyethylene insulations • Economically priced, with excellent quality - plain wooden handles
T-6A White Bristle Chip Brush 1” T-6E White Bristle Chip Brush 4” T-6B White Bristle Chip Brush 1 1/2” T-6F White Tampico Paste Brush 6” T-6C White Bristle Chip Brush 2” T-6G Chip and Dope Brush 7” T-6D White Bristle Chip Brush 3”
Workhorse® 35 Pocket Workhorse® 55 pocket Tool Carrier Tool carrier T-9D T-9E Mfg. ID 235 Mfg. ID 255
workhorse® 75 pocket General® Cotter Pin PUller Tool carrier T-19A T-9F Mfg. ID 64 Mfg. ID 275
Bungee Cords T-12A Bungee Cord - 5/16” x 500’ Roll • Holds insulation in place prior to jacketing T-12C Bungee Cord - 1/2” x 100’ Roll • Ideal for work with flanges T-12L Bungee Cord - 3/8” x 300’ Roll
Bungee cinch & Cords • Perfect as a metal jacketing tie down on both pipe and tank applications • Adjust length and tension of the bungee cord in a matter of seconds • The Buckaroos Bungee Cinch can be ordered individually or with precut bungee cord lengths • For use with 3/8” Bungee Cord only
T-12FRP Buckaroos® Bungee Cinch (Only) T-12FRP-4 Buckaroos® Bungee Cinch with 4’ Bungee Cord T-12FRP-8 Buckaroos® Bungee Cinch with 8’ Bungee Cord T-12FRP-6 Buckaroos® Bungee Cinch with 6’ Bungee Cord T-12FRP-10 Buckaroos® Bungee Cinch with 10’ Bungee Cord
Poly Web 1” Strapping • Red polypropylene strapping for use as a temporary tie down on tank and pipe metal and PVC jacketing • Strapping and buckles can be purchased separately or in pre-cut lengths
T-12S-2 Poly Web Strapping with Buckles - 2’ Long T-12S-8 Poly Web Strapping with Buckles - 8’ Long T-12S-4 Poly Web Strapping with Buckles - 4’ Long T-12S-10 Poly Web Strapping with Buckles - 10’ Long T-12S-6 Poly Web Strapping with Buckles - 6’ Long T-12T Side Release Buckles for 1” Poly Web Strap
8 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 brushes, tool carriers, Bungee Cords & Cinch, Strapping
Product Name Part # Size Product Description T-6A 1” T-6B 1 1/2” White Bristle T-6C 2” • Economically priced, popular for applying adhesive to rubber and Chip Brush T-6D 3” polyethylene insulations T-6E 4” T-6F 6”
Chip and Dope • Economically priced-great for adhesives for rubber and polyethylene T-6G 7” Brush insulations
T-9D 35 Pocket • 8 interior and 27 exterior pockets
Workhorse™ • Features a large reinforced pocket w/flap for extra wrenches, keys, etc. T-9E 55 Pocket Tool Carrier Also includes a cordless drill pocket and hammer holder (Tools Sold Separately) • Features a cordless drill pocket, tape clip and webbing chain for tape, T-9F 75 Pocket elastic loops that are perfect for screwdriver sets, and “V” pockets are designed to carry pliers
T-12A 5/16” x 500’ Roll
• Holds insulation in place prior to jacketing and works great with T-12C 1/2” x 100’ Roll Bungee Cord flanges installs
T-12L 3/8” x 300’ Roll
T-12FRP Cinch Only
T-12FRP-4 4’ Cord • Perfect as a metal jacketing tie down on both pipe and tank applications Bungee Cinch • Adjust length and tension of the bungee cord in a matter of seconds w/Cord T-12FRP-6 6’ Cord • The Buckaroos® Bungee Cinch can be ordered individually or with precut Attached bungee cord lengths T-12FRP-8 8’ Cord • For use with 3/8” Bungee Cord only
T-12FRP-10 10’ Cord
T-12S-2 2’
T-12S-4 4’
Polyweb T-12S-6 6’ • Red polypropylene strapping for use as a temporary tie down on tank and Strapping with pipe metal and PVC jacketing (strapping and buckles can be purchased Buckles T-12S-8 8’ separately or in pre-cut lengths) T-12S-10 10’
T-12T Buckle Only
General® • Four inch heat-treated high carbon steel shaft and point, T-19A Cotter Pin overall length 7 1/2” Puller
9 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 crimping & Beading
combination crimper & beader machine Part # T-20H Mfg. ID T-20H
• Performs both beading and crimping operations sequentially with one setup - both 1/4 inch and 1/8 inch bead sizes are available • The two sizes are field interchangeable with the purchase of additional tooling • Reference scales and markable surfaces for the bead edge guides - the crimp depth adjustment assists the operator in repeating setups • Each unit is set up and marked at the factory for rolling an edge bead using .016 thick aluminum • Machine specifications available upon request
roper whitney® “pexto” crimping & beading machine T-20A Mfg. ID 0581
direct drive beading extensions T-20B Mfg. ID 17/18
wiss® 5-blade hand crimper Klenk® 5-Blade Hand crimper T-18B T-18C Mfg. ID WC5S Mfg. ID MA71250
Wiss® 3-Blade hand crimper Klenk® 5-Blade offset T-18D hand crimper Mfg. ID WC3S T-18E Mfg. ID MA71260
Malco® 5-Blade hand crimper T-18F Mfg. ID C5R
10 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 crimping & Beading
Part # Product Name Product Description
• For crimping round metal pipe to create a male fitting end Wiss® 5-Blade • Crimps heavier gauge pipe up to 22 gauge galvanized steel T-18B Crimper • Optimal handle span for maximum power and comfortable operating range • Non-slip cushion grips for superior comfort and control
• Ideal for round duct, sheet metal pipe & downspouts Klenk® 5-Blade • Five blade crimper makes perfect and uniform crimps on sheet metal up to 20 T-18C Crimper gauge • Crimps up to 1 1/4” back from end for a good overlap connection
Wiss® 3-Blade • Crimps male fitting end to connect guttering, downspouts or metal pipe T-18D • Optimal handle span for maximum power and comfortable operating range Hand Crimper • Non-slip cushion grips for superior comfort and control
• Ideal for reducing diameter of round duct, sheet metal pipe, and downspouts Klenk® 5-Blade Offset for insertion into other pipes T-18E Hand Crimper • Five blades make uniform crimps on sheet metal up to 20 gauge • Crimps up to 1 5/8” back from end for good overlap connection
• Quickly downsize ends of round duct and stove pipe Malco® 5-Blade Hand • Creates a tight fitting, more self-supporting crimp connection T-18F Crimper • Compound leverage produces 7 to 1 mechanical advantage • Ergonomic Redline Handles won’t wear you down
• Furnished with ogee bead rolls and crimping rolls for one pass combined Roper Whitney® “Pexto” crimping and beading operation • Adjustable for deep or shallow beading and for fade away crimping T-20A Crimping and Beading • Maximum capacity crimping beading-24 gauge metal Machine • Portable 32 lb machine comes complete with clamp-on base • Parts and accessories available through special order
Direct Drive Beading • Feeds metal through while beading T-20B Extensions • No more pulling metal through manually (sold separately)
• Performs both beading and crimping operations sequentially with one setup - both 1/4 inch and 1/8 inch bead sizes are available Gardner Bully® • The two sizes are field interchangeable with the purchase of additional tooling • Reference scales and markable surfaces for the bead edge guides - the crimp T-20H Combination depth adjustment assists the operator in repeating setups Crimper & Beader Machine • Each unit is set up and marked at the factory for rolling an edge bead using .016 thick aluminum • Machine specifications available upon request
11 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 handbooks, safety glasses, gloves, Flashlights, hammers
Insulator’s Handbook Part # T-24A Mfg. ID T-24A Also known as the “Insulator’s Bible”, this handbook is the standard instructional aid for professional insulators across North America. Detailed layouts and best practices are provided by the late Daniel Middaugh, who spent many years on the Alaskan Pipeline.
Industrial PIPE INSULATION & Buckaroos® pocket METAL LAYOUT HANDBOOK reference guide T-25A T-25C Mfg. ID T-25A Mfg. ID T-25C
Starlite Safety Glasses Buckaroos® with gray lenses goatskin gloves T-27E Medium: T-29A-1 Mfg. ID 4483M Mfg. ID 3611-MED Large: T-29A-2 Mfg. ID 3611-LG
Dotted kevlar gloves Spartacus cut Large: T-29B-L resistant gloves Mfg. ID K20DD Large: T-29C-L X-Large: T-29B-XL Mfg. ID SPARTACUS Mfg. ID K20DD X-Large: T-29C-XL Mfg. ID SPARTACUS
taeki 5 sheet metal Klenk® Telescoping Flashlight gloves T-129 Large: T-29D-L Mfg. ID DA76570 Mfg. ID GBNC5 X-Large: T-29D-X-L Mfg. ID GBNC5
wood handled 21 oz. tinners hammer fiberglass handled 21 oz. tinners hammer T-30F T-30G Mfg. ID 21THW Mfg. ID 21THF
12 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 handbooks, safety glasses, gloves, Flashlights, hammers
Part # Product Name Product Description
• Known in Alaska as the “Insulation Bible” Buckaroos® Insulator’s • Written by insulators of the Alaskan pipeline T-24A Handbook • Easy step-by-step instructions make this the perfect manual for new or experienced insulators
• Great learning guide for new insulators Industrial Pipe Insulation & T-25A • Simplified instructions, drawings, charts, math facts and an in depth glossary Metal Layout Handbook • A great reference guide for all insulators
Buckaroos® Pocket • This great little book is a concise all-purpose reference featuring hundreds of tables, T-25C Reference Guide maps, formulas, constants & conversions
Starlite Safety Glasses • Snug and comfortable fit helps minimize slippage and provide full brow protection. T-27E with Gray Lenses • Scratch Resistant, hardcoated 100% polycarbonate lens
• The Gloves used by the pros T-29A-1 Buckaroos® Goatskin • High quality and long lasting T-29A-2 Gloves - Medium/Large • Great for working with insulation
• Dupont Kevlar is a lightweight synthetic material and is five times stronger than steel T-29B-L Dotted Kevlar Gloves - • Provides outstanding cut, slash and heat resistance T-29B-XL Large/X-Large • Great for automotive, glass handling, sheet metal work and many cutting application
• Comfortable to with breathable coating T-29C-L Spartacus Cut Resistant • Gray PU coated palm with gray and black 13 gauge HPPE liner T-29C-XL Gloves - Large/X-Large • Superior resistance to abrasions and tears • ANSI cut level 2
• Taeki 5 is a revolutionary cut resistant engineered yarn, that offers the highest standard T-29D-L Taeki 5 Sheet Metal Gloves EN Cut Level 5 T-29D-XL - Large/X-Large • Offers superior dexterity and tactile sensitivity • Perfect for automotive, glass handling, sheet metal work & cutting applications
• Extends out to 20” (7 1/2” when collapsed) Klenk® Telescoping T-129 • Super bright 5 LED flashlight with magnetic tip that has up to a 2 lb. pick up power Flashlight • Uses 3 LR44 batteries (included)
Wood Handled 21 oz. • The 21 oz. sheet metal hammer has long been the standard in the fabrication trades T-30F Tinners Hammer • Made in the United States
Fiberglass Handled 21 oz. • The 21 oz. sheet metal hammer has long been the standard in the fabrication trades T-30G Tinners Hammer • Made in the United States
13 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 hammers, hand seamers, tongs, Saws
Klenk® 16 oz. fiberglass tinners hammer Klenk® 20 oz. square head tinners hammer T-30H T-30J Mfg. ID DA70500 Mfg. ID DA70510
Malco® 18 oz. setting hammer wiss® hand seamer T-30K T-32E Mfg. ID SH3 Mfg. ID WS3
wiss® offset hand seamer Klenk® straight 9 1/2” T-32F fairmont tongs Mfg. ID WS4 T-32G Mfg. ID MT14020
Klenk® 9 1/2” offset tongs midwest snips® 6” wide hand seamer T-32H T-32J Mfg. ID MT14030 Mfg. ID MWT-S6
Malco® 3” hand seamer stanley® wallboard saw T-32K T-58B Mfg. ID S2 Mfg. ID 15-206
Stanley® Contractor grade stanley® “Shortcut” Tool box saw cushion grip wallboard saw T-58E T-58BB Mfg. ID 15-334 Mfg. ID 15-556
Marshalltown® rockwarrior utility saw nicholson® #420 tuttle tooth pruning saw T-58K T-58L Mfg. ID RW426 Mfg. ID 80309
14 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 hammers, hand seamers, tongs, Saws
Part # Product Name Product Description
Klenk® 16 oz. Fiberglass • Features a balanced head for user comfort and a true swing T-30H Tinners Hammer • Strong fiberglass handle
Klenk® 20 oz. Square Head • Features a balanced head for user comfort and a true swing T-30J Tinners Hammer • Full polished finish and a rubber-grip handle for less fatigue
• One piece forged, I-beam construction Malco® 18 oz. T-30K • Leather gripped grip is protected with a durable lacquer coating Setting Hammer • Leather grip conforms to hand over time and use
• Used to bend and flatten sheet metal • Optimal handle span for maximum power and comfortable operating range T-32E Wiss® Hand Seamer • Non-slip cushion grips for superior comfort and control • 3-1/4” jaw width, 1-1/4” maximum seam depth, 1/4” depth markings
• Used to bend and flatten sheet metal • Ideal for working in confined areas Wiss® Offset T-32F • Optimal handle span for maximum power and comfortable operating range Hand Seamer • Non-slip cushion grips for superior comfort and control • 3-1/4” jaw width, 1-1/4” maximum seam depth, 1/4” depth markings
• Used in HVACR, metal roofing, and other sheet metal applications • Forged and plated tongs have bending depth marks on jaws Klenk® Straight T-32G • Regular or offset handle models 9 1/2” Fairmont Tongs • Available with cushion grip handles, providing a softer, more comfortable grip • Made in USA
• Used in HVACR, metal roofing, and other sheet metal applications • Forged and plated tongs have bending depth marks on jaws Klenk® T-32H • Regular or offset handle models 9 1/2” Offset Tongs • Available with cushion grip handles, providing a softer, more comfortable grip • Made in USA
• Seamer blades 6” long by 1-/4” wide with a 1-7/16” throat depth Midwest Snips® • Blades are forged T-32J 6” Wide Hand Seamer • Kush’n power grips comfort users hands and reduces fatigue • Made in the USA
• Bend, fold, flatten, straighten sheet metal on the job • Depth markings graduated in 1/4 inch (6.35 mm) increments to a full 1-1/4 inch (31.75 mm) jaw depth T-32K Malco® 3” Hand Seamer • 24 gauge (0.71 mm) capacity in galvanized steel • Compound leverage produces 7 to 1 mechanical advantage • Ergonomic Redline Handles won’t wear you down
• Lightweight all purpose saw T-58B Stanley® Wallboard Saw • Non-clogging teeth • Pointed blade for starting holes
Stanley® Contractor Grade • Fully hardened, tempered blade is designed to be strong and durable T-58BB Cushion Grip • Teeth are designed to cut fast and won’t clog Wallboard Saw • Sharp tip for plunge cuts
• Features a new revolutionary tooth configuration that delivers clean cuts much faster than Stanley® “Shortcut” Tool conventional handsaws T-58E Box Saw • Compact blade for easier storage and handling • Comfortable hardwood handle with special square/miter feature built in
• Tempered high carbon steel blade with beveled point Marshalltown® T-58K • Blade cuts in both directions RockWarrior Utility Saw • Intended for drywall but will cut most any non-metallic material
Nicholson® #420 Tuttle • Blade length 24” - Teeth designed for fast cutting T-58L Tooth Pruning Saw • Great all-purpose saw
15 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Serrated KNIVES
Serrated Knives Part # Product Recommended Blade Handle Recommended Handle Type Blade Type Description Use Length Color Knife Sheath Fiberglass Serrated - T-36A1 Scalloped 6” Utility Knife 6” Polypropylene Black T-35A Rigid Foam Scalloped Fiberglass Serrated - T-35B T-36B1 Scalloped 8” Utility Knife 8” Polypropylene Black Rigid Foam Scalloped T-35D SofGrip Scalloped 9” Fiberglass Serrated - T-36LL 9” Rubber White T-35D All-Purpose Knife Rigid Foam Scalloped Fiberglass OXO® Serrated 6” T-36OXO Elastomeric 6” Rubber Black Serrated T-35A All-Purpose Knife Rigid Foam Russell International® Fiberglass Serrated - T-36SC-6 Scalloped Blade Elastomeric 6” Polypropylene White T-35A Scalloped 6” Utility Knife Rigid Foam Fiberglass Scalloped 5 1/2” Serrated - T-36SGL Elastomeric 5 1/2” Rubber White T-35A Utility Slicer Scalloped Rigid Foam V-Lo 9” Scalloped Fiberglass Rubber - Serrated - T-36VL4 9” Gray/Black T-35D Utility Knife Elastomeric Textured Scalloped Fiberglass V-Lo 6” Scalloped Rubber - Serrated - T-36VL5 Elastomeric 6” Gray/Black T-35A Utility Knife Textured Scalloped Rigid Foam SofGrip 8” Tiger Edge Fiberglass Serrated - Tiger T-35B T-36VV 8” Rubber White Utility Knife Elastomeric Edge T-35D Fiberglass SofGrip 6” Scalloped Serrated - T-36WW Elastomeric 6” Rubber White T-35A Utility Knife Scalloped Rigid Foam
T-36A1 T-36B1 T-36LL Mfg. ID 31627B Mfg. ID 31628B Mfg. ID 24263
T-36OXO T-36SC-6 Mfg. ID 89151V1 Mfg. ID 31627
T-36SGL T-36VL4 T-36VL5 Mfg. ID 24303 Mfg. ID 29363 Mfg. ID 29373
T-36VV T-36WW Mfg. ID 24293 Mfg. ID 24213
16 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Double-Sided & Miscellaneous KNIVES
double-sided Knives Part # Product Recommended Blade Handle Recommended Handle Type Blade Type Description Use Length Color Knife Sheath Double Sided Klenk® Double Sided T-36DK Duct Board 6” Rosewood Brown - Smooth/ Included Duct Knife with Sheath Serrated Double Sided Klenk® Ergo Handled T-36DK-2 Duct Board 6” Rubber Black - Smooth/ Included Double Sided Knife Serrated Double Sided Malco® Double Edge T-36DK-6 Duct Board 6” Rubber Black - Smooth/ Included Smooth Blade Duct Knife Serrated
T-36DK T-36DK2 T-36DK-6 Mfg. ID DA71000 Mfg. ID DA71010 Mfg. ID DK6S
miscellaneous Knives & Sheaths Part # Product Recommended Blade Handle Recommended Handle Type Blade Type Description Use Length Color Knife Sheath T-36C Easy Grip Hole Cutter Fiberglass n/a Rubber Black n/a n/a
T-36JK Klenk® Utility Jack Knife Utility Knife used in multiple cutting applications
T-36UK Wiss® Utility Knife Utility Knife used in multiple cutting applications
T-36C T-36JK T-36UK Mfg. ID 20181 Mfg. ID DA84140 Mfg. ID WK8V
Part # Product Name Product Description Buckaroos® 6” Knife T-35A • Durable leather knife protector Sheath Buckaroos® 8” Knife • Durable leather knife protector T-35B Sheath • T-35B is perfect for the T-36B1 8” Scalloped Utility Knife • Protects both the user and the ultimate edge of Dexter knives Dexter® 9” Knife T-35D • Stitched and riveted leather body with convenient belt loops Scabbard • Fits up to a 9” blade
T-35A T-35B T-35D Mfg. ID KT35A Mfg. ID KT35B Mfg. ID 20450
17 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 non-Serrated KNIVES
6” Flexible ham boning knife Part # T-36HB Mfg. ID 02010
• For cutting fiberglass • Flexible high-carbon steel 6” blade boning knife with beech wood handle
T-36Q T-36R / T-36R8 T-36S Mfg. ID X2T Mfg. ID 60170 Mfg. ID 1880
T-36AA T-36DD T-36EE Mfg. ID 2130 Mfg. ID 75571 Mfg. ID 60130
T-36FF T-36HB T-36HBR Mfg. ID 80520 Mfg. ID 02010 Mfg. ID 2060
T-36MK T-36MM T-36PP Mfg. ID MK4600 Mfg. ID 31615 Mfg. ID 31614
T-36QR T-36RR Mfg. ID 10351 T-36SG Mfg. ID 31620 Mfg. ID 24033
T-36SS T-36TT T-36UU Mfg. ID 3323 Mfg. ID 3223 Mfg. ID 3233
T-36VL1 T-36VL2 T-36VL3 Mfg. ID 29003 Mfg. ID 29013 Mfg. ID 29193
18 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 non-serrated KNIVES Non-Serrated Knives Part # Product Recommended Blade Handle Recommended Handle Type Blade Type Description Use Length Color Knife Sheath Dexter® 4” Tapered Point Elastomeric Smooth - T-36Q 4” Hardwood Brown T-35A Shoe Knife Rigid Foam Tapered Dexter® 10” Rubber Smooth - T-36R Elastomeric 10” Hardwood Brown n/a Knife Curved Smooth - T-36R8 Dexter® 8” Rubber Knife Elastomeric 8” Hardwood Brown n/a Curved Dexter® #1376 Fiberglass Smooth - T-36S 6” Hardwood Brown T-35A Boning Knife Elastomeric Boning Dexter® #1377 Wide Fiberglass Smooth - T-35B T-36AA 7” Hardwood Brown Blade Boning Knife Rigid Foam Wide Boning T-35D Smooth - T-36DD Dexter® #421 Shoe Knife Elastomeric 4” Hardwood Brown T-35A Tapered Smooth - T-36EE Dexter® 6” Rubber Knife Elastomeric 6” Hardwood Brown T-35A Squared Elastomeric Smooth - T-36FF Dexter® Mica Knife 6” Hardwood Black T-35A Rigid Foam Pointed
Dexter® #1376-HB Fiberglass Smooth T-36HB Flexible Ham Boning 6” Hardwood Brown - Flexible T-35A Rigid Foam Knife Boning Smooth Dexter® #1376-HBR Fiberglass T-36HBR 6” Rosewood Brown - Flexible T-35A Ham Boning Knife Rigid Foam Boning Elastomeric Buckaroos® Mini Smooth - T-36MK Rigid Foam 3 5/8” Plastic Black T-35A Insulation Knife 3-Sided Blade Duct Board Dexter® 6” Wide Blade Fiberglass Smooth - T-36MM 6” Polypropylene White T-35A Boning Knife Rigid Foam Boning Dexter® Narrow Flex Fiberglass Smooth - T-36PP 6” Polypropylene White T-35A Blade 6” Boning Knife Rigid Foam Narrow Boning Elastomeric T-35B T-36QR Dexter® Fillet Knife 8” Hardwood Brown Smooth Fiberglass T-35D Dexter® Curved Blade Fiberglass Smooth - T-36RR 6” Polypropylene White T-35A Boning Knife Rigid Foam Curved Boning Dexter® SofGrip White Fiberglass Smooth - T-36SG 6” Rubber White T-35A Handled 6” Boning Knife Rigid Foam Flexible Yellow Handle Limelight- Elastomeric T-36SS 3 3/4” Polypropylene Yellow Smooth T-35A Poultry Knife Fiberglass Yellow Handle Limelight - Fiberglass Smooth - T-36TT Flexible Curved Elastomeric 6” Polypropylene Yellow T-35A Curved Boning Boning Knife Rigid Foam Yellow Handle Limelight - Fiberglass Smooth - T-36UU Curved Blade Elastomeric 6” Polypropylene Yellow Narrow Curved T-35A Boning Knife Rigid Foam Boning Fiberglass V-Lo 6” Flexible Smooth - T-36VL1 Elastomeric 6” Rubber -Textured Gray/Black T-35A Boning Knife Flexible Rigid Foam Fiberglass V-Lo 6” Narrow Blade Smooth - T-36VL2 Elastomeric 6” Rubber -Textured Gray/Black T-35A Boning Knife Flexible Rigid Foam Elastomeric T-35B T-36VL3 V-Lo 8” Fillet Knife 8” Rubber -Textured Gray/Black Smooth Fiberglass T-35D
19 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Mini brake, Miter Tubes, Nippers, NOTCHERS, wrenches, pliers
Metal jacket cutter Malco® mini braKe T-40A T-41H Mfg. ID T-40A Mfg. ID MB48A Malco® mini brake legs T-41J Mfg. ID MBL
Malco® mini Pan braKe channellock® T-41Q 7” End Cut Nippers Mfg. ID MB48B T-45A Mfg. ID 357
channellock® crescent® 8 1/4” end cut nippers 8” End Cut Nippers T-45E T-45B Mfg. ID 728CVN Mfg. ID 358
channellock® code blue wiss® hand notcher 8” end cut nippers T-46E T-45F Mfg. ID WHN1 Mfg. ID 358CB
Malco® hand notcher Channellock® code blue T-46F 8 1/2” long nose pliers Mfg. ID N1 T-53CB-1 Mfg. ID 318CB
Channellock® code blue Channellock® code blue 9 1/2” 8” diagonal cutting pliers Tongue & groove pliers T-53CB-2 T-53CB-3 Mfg. ID 338CB Mfg. ID 420CB
Channellock® code blue 9 1/2” Channellock® code blue 8” extra wide crimping plier w/cutter adjustable wrench T-53CB-4 T-53CB-5 Mfg. ID 909CB Mfg. ID 6WCB
crescent® 7” tongue & groove pliers crescent® 10” tongue & groove pliers T-53J T-53K Mfg. ID R27CV Mfg. ID R210CV
20 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Mini brake, Miter Tubes, Nippers, NOTCHERS, wrenches, pliers
Part # Product Name Product Description • Light weight and easy to use on the jobsite T-40A Metal Jacket Cutter • Save time and money on the job • Super sharp blade is capable of cutting up to .016 metal jacketing • Accommodates sheet metal up to 48” wide in any length • Mini Brake produces bends up to 135º in sheet metals, including aluminum, copper, and T-41H Malco® Mini Brake 22-gauge galvanized steel • Compact size and lightweight (58 lbs.), makes the Mini Brake for use on any jobsite T-41J Malco® Mini Brake Legs • Optional - legs sold separately • On-the-job pans, angled corners, or large components • Fast, easy assembly T-41Q Malco® Mini Pan Brake • One-person Portability • Works on bench, tailgate or leg kit • 135° bends in 22-gauge (0.86 mm) galvanized • Lightweight versus other nippers Channellock® 7” End Cut T-45A • Perfectly mated end cutter, heat treated to holds its edge Nippers • Polished high carbon drop forged steel • Lightweight versus other nippers Channellock® 8” End Cut T-45B • Perfectly mated end cutter, heat treated to holds its edge Nippers • Polished high carbon drop forged steel • Precision manufactured forged from alloy tool steel Crescent® 8 1/4” End Cut T-45E • Handles with carefully designed leverage ratio to blades for easier cutting Nippers • Electronically induction hardened, carefully designed, angled cutting edges and blade sizes • New Code Blue™ designation on handles makes it easier than ever to choose the right tool Channellock® Code Blue for the job T-45F 8” End Cut Nippers • Precision made of fine polished, high carbon drop forged steel • Laser-hardened cutting edges provide longer life and greater ease of cut • Cuts 30 degree V shaped cut in sheet metal T-46E Wiss® Hand Notcher • Gives clean notch without slipping at corners and take-off tabs • Non-slip cushion grips for superior comfort and control • For corner notches and take-off tabs • Make 13/16 inch (20.64 mm) deep, 30° “V” shaped cuts in 24-gauge (20.66 mm) T-46F Malco® Hand Notcher • Galvanized steel • Compound leverage produces 7 to 1 mechanical advantage • Ergonomic Redline Handles won’t wear you down • Cross-hatching on jaws grabs work tightly Channellock® Code Blue T-53CB-1 • Precision made of fine polished, high carbon drop forged steel 8 1/2” Long Nose Pliers • Laser-hardened cutting edges provide longer life and greater ease of cut • High leverage, heavy duty construction Channellock® Code Blue T-53CB-2 • Laser-hardened cutting edges provide for longer life and great ease of cut 8” Diagonal Cutting Pliers • Precision made of fine polished, high carbon drop forged steel Channellock® Code Blue • Right angle teeth grip in all directions for maximum bite and minimum wear T-53CB-3 9 1/2” Tongue & Groove • Patented undercut tongue & groove design assures no slip jaw action Pliers • Patented reinforcing edge minimizes stress breakage Channellock® Code Blue • Precision crimping dies and cutters T-53CB-4 9 1/2” Crimping Plier with • Slim nose shape for tight places Cutter • Perfectly mated cutters, scientifically heat treated to hold their edge Channellock® Code Blue • Greater jaw capacity supports larger nuts and bolts T-53CB-5 8” Extra Wide Adjustable • Longer jaws grip better avoiding slippage or nut round off Wrench • Measurement scales are handy for sizing nuts, pipe and tube diameters • Designed to grip all shapes like rods, pipes and cable connections Crescent® 7” Tongue & T-53J • Straight jaw and self-locking jaw adjustment Groove Pliers • Red non-slip cushion grip handle • Designed to grip all shapes like rods, pipes and cable connections Crescent® 10” Tongue & T-53K • Straight jaw and self-locking jaw adjustment Groove Pliers • Red non-slip cushion grip handle
21 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 TApe Dispenser, circumference tapes & Rules, tape measures
Tape Dispenser Part # T-43B Mfg. ID T-43B
• Can be used under or over the ladder rung and stays secure when moving positions • Ideal for 2 Mil Foil, FSK, and ASJ insulation tapes • Available for 3”,4”, and 5” wide insulation tapes • Fast and easy to do a new roll change-out with wing nuts • Lightweight at 1.5 pounds each • Fabricated from durable 14 gauge steel
Boxtown team® stanley® diameter & ladder carrier Circumference Tape Rule T-37A T-56F Mfg. ID Series 1 Mfg. ID 33-115
Lufkin® 2’ blacksmith’s Folding rule Lufkin® 3’ steel circumference rule T-56AA T-56G Mfg. ID 86 Mfg. ID 953FT
Lufkin® 4’ steel circumference rule Lufkin® 1/2” x 12’ T-56H series 1000 power tape Mfg. ID 954FT T-56HV-1 Mfg. ID PHV1012
Lufkin® 3/4” x 12’ lufkin® 1” x 25’ series 1000 power tape series 1000 power tape T-56HV-2 T-56HV-4 Mfg. ID PHV1312 Mfg. ID PHV1425
lufkin® circumference & Diameter stanley® leverlock tape measure 1” x 25’ Tape T-56W T-56Y Mfg. ID W606P Mfg. ID 30-825
22 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 TApe Dispenser, circumference tapes & Rules, tape measures
Part # Product Name Product Description
• Attaches to 4-8 ft. A-frame fiberglass ladders for a safer and more comfortable Boxtown Team® transport around the jobsite. It also fits some 10-12 ft. ladders, aluminum and older T-37A Ladder Carrier fiberglass extension ladders • Weight Load: 75 lbs.
• Can be used under or over the ladder rung and stays secure when moving positions • Ideal for 2 Mil Foil, FSK, and ASJ insulation tapes • Available for 3”,4”, and 5” wide insulation tapes Buckaroos® T-43B • Fast and easy to do a new roll change-out with wing nuts Tape Dispenser • Lightweight at 1.5 pounds each • Fabricated from durable 14 gauge steel • Available in 5-Packs for Distributors
• Riveted joint has large side washer and stop which brings rule to a firm stop when opened straight Lufkin® 2’ Blacksmith’s T-56AA • For converting diameters directly to circumference measurements Folding Rule • Lower edge on one side is graduated to 1/16th of an inch, the upper edge on the other side has a 1/8th inch scale
• Scale on the back of the blade will measure up to 3’ in diameter Stanley® Diameter & T-56F • Spring is heat treated for added durability and protected blade will withstand abrasion Circumference Tape Rule • Tape measure blade is 1/4” x 10’
• The “standard” rule for tinners and other sheet metal workers Lufkin® 3’ Steel T-56G • Made of tempered medium weight steel Circumference Rule • Reverse side has formulas for calculating circumference, diameter and area
• The “standard” rule for tinners and other sheet metal workers Lufkin® 4’ Steel T-56H • Made of tempered medium weight steel Circumference Rule • Reverse side has formulas for calculating circumference, diameter, and area
• Hi-Viz orange case makes tape easy to find on the job Lufkin® 1/2” x 12’ Series T-56HV-1 • Lightweight, high strength case is designed to fit perfectly in the hand 1000 Power Tape • Toggle lock is positioned for convenient operation
• Hi-Viz orange case makes tape easy to find on the job Lufkin® 3/4” x 12’ Series T-56HV-2 • Lightweight, high strength case is designed to fit perfectly in the hand 1000 Power Tape • Toggle lock is positioned for convenient operation
• Hi-Viz orange case makes tape easy to find on the job Lufkin® 1” x 25’ Series T-56HV-4 • Lightweight, high strength case is designed to fit perfectly in the hand 1000 Power Tape • Toggle lock is positioned for convenient operation
• Designed for measuring diameters of pipes, cables, tires or any circular objects Lufkin® Circumference & T-56W • Conversion from diameter to circumference is made by simply turning the blade Diameter Tape Measure • Tape measure is 1/4” x 6’ with a polished chrome case
Stanley® Leverlock • Power return tape rule with automatic bottom lock for easy operation T-56Y 1” x 25’ Tape • Special Tru-Zero hook allows use of nail as pivot to draw circles and arcs
23 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 tape measures, Layout Gore Rule, Tee Master, scratch awls, File Stone
stanley® leverlock Buckaroos® dial-A-Miter 1” x 30’ Tape T-56DM T-56Z Mfg. ID T-56DM Mfg. ID 30-830
Layout gore rule Tee master T-56GR T-56TM Mfg. ID T-56GR Mfg. ID T-56TM
Digaroo™ Fabrication Tool crescent® 3 7/8” scratch awl T-59B T-60D Mfg. ID T-59B Mfg. ID 73
Malco® large grip 3 1/2” scratch awl tapered file stone T-60F T-62A Mfg. ID A1 Mfg. ID JD2
PVC Pipe Caliper Pipe Caliper T-13H T-13A Mfg. ID T-13H Mfg. ID T-13A
Buckaroos® Buckaroos® 10.3 oz. Aluminum Pipe Caliper Caulk Gun T-13G T-14A Mfg. ID T-13G Mfg. ID 77
Buckaroos® 10.3 oz. Skeleton Caulk Gun T-14C Mfg. ID 111
24 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 tape measures, Layout Gore Rule, Tee Master, scratch awls, File Stone
Part # Product Name Product Description
• For measuring iron pipe and copper tubing T-13A Pipe Caliper • For pipe sizes from 1/4” to 12” • Sturdy construction-nickel plated steel, corrosion resistant
• Easily identify pipe size in IPS, CTS, and CPVC measurements up to a 16” Iron Pipe Size O.D. Buckaroos® Aluminum T-13G • Includes a handy IPS to CTS conversion chart and extends to a 14” ruler Pipe Caliper • Rugged and long lasting
• Easily identify pipe size in IPS, CTS, and CPVC measurements up to a 16” Iron Pipe Size O.D. Buckaroos® T-13H • Includes a handy IPS to CTS conversion chart and extends to a 14” ruler PVC Pipe Caliper • Lightweight and flexible Buckaroos® T-14A • Economy ratchet rod caulk gun used for light consistency caulks and sealants 10.3 oz. Caulk Gun Buckaroos® 10.3 oz. T-14C • Smooth rod parallel framed caulk gun with tip cutter, seal punch, and ladder hook Skeleton Caulk Gun • Easily helps you make both Short and Long Radius Elbows • Dial in the pipe size and you see the throat and heel measurements, angle of cut, and number of miters required for each • From 1” iron pipe size to 30” iron pipe sizes T-56DM Buckaroos® Dial-A-Miter • 19 iron pipe sizes on each side • Pocket size (3 1⁄2” diameter) and easy to carry • Made of a durable high gloss plastic film lamination • Used by trainers, insulators, and educators • Easy to read numbers and letters
• This layout tool makes it easy to remember how to layout a 16 point gore • Step by step instructions included with each rule T-56GR Layout Gore Rule • This 6” x 6” square also has a protractor for laying out tee patterns • Made of 16 gauge steel, laser etched with a rust resistant black oxide finish
• Lay out regular equal tee templates for 1” to 12” pipe in seconds • Made of durable ABS thermal plastic. Will not rust or corrode T-56TM Tee Master Layout Rule • Only 7” x 11” and 1/16” thick makes it light weight and easy to carry • The Tee Master has a 1” to 6” scale graduated in 1/8” increments • Comes with complete instructions
Stanley® Leverlock • Power return tape rule with automatic bottom lock for easy operation T-56Z 1” x 30’ Tape • Special Tru-Zero hook allows use of nail as pivot to draw circles and arcs • Simple cutting tool used to fabricate light density foam insulations, like polyisocyanurate, phenolic foam, bead board, and Styrofoam™ • Digs in deep for a nice clean look • Ergonomic 5” long soft red handle T-59B Digaroo™ Fabrication Tool • Sharp 1/2” wide and 1” long stainless steel blades • Lightweight design • Ideal for lightweight foams • Ideal for refrigeration jobs • Can be used to cut out for heat tracing
Crescent® 3 7/8” • 3 7/8” Long Steel Shaft T-60D Scratch Awl • Wood Handle • Use to scribe lines on metal, plastic and a variety of other material Malco® Large Grip T-60F • Pierce holes in wood, plastic, or leather; even light gauge metal 3 1/2” Scratch Awl • Perfect for splitting saddles
• Excellent abrasive surface T-62A Tapered File Stone • 14” in length • Durable red colored wood handle
25 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Knife & Scissor sharpeners, shears, snips
Accusharp® Knife sharpener accusharp® Scissor Sharpener T-62C T-62D Mfg. ID 1C Mfg. ID 2C
clauss® multi-purpose shears clauss® stainless steel 9” bent shears T-63C T-63E Mfg. ID 11100C Mfg. ID 18400
clauss® industrial shears clauss® 8” high leverage T-63F sure-set shears Mfg. ID 11360 T-63K Mfg. ID 11200C
clauss® 7” curved light metal cutting snips wiss® J-7 light metal straight cutting snips T-63H T-63M Mfg. ID 23000 Mfg. ID J7S
Malco® turbo shears clauss® 8” Stainless Steel bent scissors T-63N T-63P Mfg. ID TS1 Mfg. ID 18343
clauss® extrem-edge titanium clauss® 9” true professional bonded shears titanium shear T-63S T-63T Mfg. ID 18091 Mfg. ID 18054
wiss® offset pattern snip T-65D Mfg. ID W7BWN
26 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Knife & Scissor sharpeners, shears, snips
Part # Product Name Product Description
• A razor sharp edge in 10 seconds AccuSharp® Knife T-62C • Diamond honed tungsten carbide blades Sharpener • Reversible blades have a total expected life of 2-3 years in normal commercial use
• Large ergonomic handle fits either hand safely and securely AccuSharp® Scissor T-62D • Full length finger guard protects the user’s fingers during use Sharpener • Sharpening blades are diamond honed, tungsten carbide; providing years of reliable use
• Hot forged, thru-hardened and fully double-plated chrome over nickel Clauss® Multi-Purpose T-63C • Extra leverage for cutting thick, tough materials Shears • Cut length - 2” Overall length - 7 3/4”
• Heavy duty shears with thick Stainless Steel blades Clauss® Stainless Steel T-63E • Long lasting edges will withstand use 9” Bent Shears • Ergonomic nylon handles are designed for comfort
• Blades slice easily through heavy fabrics, rubber roofing, and canvas T-63F Clauss® Industrial Shears • Full chrome with polished handles • Cut length - 5 1/4” Overall length - 12 1/2”
Clauss® 7” Curved Light • For precise metal cutting and trimming T-63H Metal Cutting Snips • These hot forged cutters are perfect for spurs and jagged edges
• Multi-purpose and specialty high leverage shears Clauss® 8” High Leverage T-63K • Hot forged, thru-hardened, fully double plated chrome over nickel SureSet Shears • One blade serrated to prevent slip-out
Wiss® J-7 Light Metal • Solid steel light metal cutting snips T-63M Straight Cutting Snips • Hot drop forged - Polished blades
• Inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill • Makes straight cuts or is capable of navigating tight curved patterns and squares in heavy T-63N Malco® Turbo Shears 20 gauge galvanized steel • Cutting applications include ferrous and non-ferrous sheet-metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets
• Heavy duty shears with thick Stainless Steel blades Clauss® 8” Stainless Steel T-63P • Long lasting edges will withstand use Bent Scissors • Ergonomic nylon handles are designed for comfort
• Features Titanium Bonded blades that are 3x harder than Stainless Steel so they stay Clauss® ExtremEdge sharper longer T-63S Titanium Bonded Shears • The blades are made to resist corrosion and adhesives • Capable of cutting multiple layers of material
• Features Titanium Bonded blades that are 3x harder than Stainless Steel so they stay Clauss® 9” True sharper longer T-63T Professional Titanium Shear • The blades are made to resist corrosion and adhesives • Comfort RibGrip handles
• Offset handles keep material away from hands for easier cutting and safety T-65D Wiss® Offset Pattern Snip • Blades individually hand edged for maximum cutting efficiency • Cuts up 18 gauge low carbon steel
27 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 snips
offset aviation snips offset aviation snips SPECIAL SERIES snips
T-65E T-65F T-65G Mfg. ID Mfg. ID Mfg. ID T-65M T-65L T-65BB T-65CC MWT-6716B MWT-6710R MWT-6710L Mfg. ID M6R Mfg. ID M7R Mfg. ID M2RS1 Mfg. ID M1RS1
straight cut aviation snips Straight Cut aviation snips
T-65H T-65J T-65K Mfg. ID Mfg. ID Mfg. ID T-65V T-65W T-65X MWT-6716S MWT-6716R MWT-6716L Mfg. ID M3R Mfg. ID M2R Mfg. ID M1R
Left & Right upright aviation snips straight pattern snips
T-65UR-L T-65UR-R Mfg. ID Mfg. ID T-65JJ T-65KK T-65LL MWT-6900L MWT-6900R Mfg. ID A11N Mfg. ID A10N Mfg. ID A9N
snips
T-65-41R T-65-M300 Mfg. ID M4R Mfg. ID M300
28 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 snips
Part # Product Name Product Description
Midwest Snips® • Nominal Length: 9”, Cut Length: 7/8”, Cutting Capacity (CR/SS): 16/18 T-65E Bulldog Snip • Notch cuts
• Nominal Length: 9-3/4”, Cut Length: 1-1/4”, Cutting Capacity (CR/SS): 18/22 Midwest Snips® T-65F • Cuts tight right curves and straight Offset Aviation Snip • Kush’n-Power comfort grips
• Blades are hot drop-forged of molybdenum alloy steel for exceptional strength and durability Midwest Snips® T-65G • Heavy gauge half hard steel handles will not collapse from hand pressure Offset Aviation Snip • Cutting capacity of 18 gauge cold rolled steel or 22 gauge stainless steel sheet metal
Wiss® Metalmaster Offset • Jaws are made of extra tough and wear-resistant special molybdenum steel T-65M Snips - Red Handle • Cutting capacity - 18 gauge low carbon steel
Wiss® Metalmaster Offset • Jaws are made of extra tough and wear-resistant special molybdenum steel T-65L Snips - Green Handle • Cutting capacity - 18 gauge low carbon steel
Wiss® Metalmaster Special • Blades are specially hardened to cut exotic metals T-65BB Series Snip - Right Cut • Cutting Capacity 18 gauge Stainless Steel
Wiss® Metalmaster Special • Blades are specially hardened to cut exotic metals T-65CC Series Snip - Left Cut • Cutting Capacity 18 gauge Stainless Steel
Midwest Snips® Aviation Snip • Nominal Length: 9-3/4”, Cut Length: 1-3/8”, Cutting Capacity (CR/SS): 18/22 T-65H - Yellow Handle • Cuts wide left and right curves and straight
Midwest Snips® Aviation Snip • Nominal Length: 9-3/4”, Cut Length: 1-1/4”, Cutting Capacity (CR/SS): 18/22 T-65J - Green Handle • Cuts wide right curves and straight
Midwest Snips® Aviation Snip • Nominal Length: 9-3/4”, Cut Length: 1-1/4”, Cutting Capacity (CR/SS): 18/22 T-65K - Red Handle • Cuts wide left curves and straight
Wiss® Metalmaster Aviation • Non-Slip serrated jaws are made of extra tough, wear-resistant, special molybdenum steel T-65V Snip - Yellow Handle • Cutting capacity - 18 gauge low carbon steel
Wiss® Metalmaster Aviation • Non-Slip serrated jaws are made of extra tough, wear-resistant, special molybdenum steel T-65W Snip - Green Handle • Cutting capacity - 18 gauge low carbon steel
Wiss® Metalmaster Aviation • Non-Slip serrated jaws are made of extra tough, wear-resistant, special molybdenum steel T-65X Snip - Red Handle • Cutting capacity - 18 gauge low carbon steel
• Right angle blades make cutting easier in tight spaces and overhead Midwest Snips® Upright Snip T-65UR-L • Hot drop-forged blades that are virtually unbreakable and provide the longest edge life - Red Handle • Cutting capacity 24 gauge cold rolled steel and 28 gauge stainless steel
• Right angle blades make cutting easier in tight spaces and overhead Midwest Snips® Upright Snip T-65UR-R • Hot drop-forged blades that are virtually unbreakable and provide the longest edge life - Green Handle • Cutting capacity 24 gauge cold rolled steel and 28 gauge stainless steel
• Cuts straight and wide curves when trimming light gauge stock Wiss® 9 3/4” Straight T-65JJ • Blades are individually hand edged for maximum cutting efficiency Pattern Snips • Cutting Capacity 23 gauge low carbon steel
• Cuts straight and wide curves when trimming light gauge stock Wiss® 11” Straight T-65KK • Blades are individually hand edged for maximum cutting efficiency Pattern Snips • Cutting Capacity 21 gauge low carbon steel
• Cuts straight and wide curves when trimming light gauge stock Wiss® 12 1/2” Straight T-65LL • Blades are individually hand edged for maximum cutting efficiency Pattern Snips • Cutting Capacity 20 gauge low carbon steel
• Cuts curves, straight or any combination in duct work, seams or sheet metal Wiss® Metalmaster T-65-41R • Patented ball-bearing jaw action automatically adjusts blade clearance Pipe and Duct Snip • Cutting capacity 20 gauge low carbon steel
• Combines the cut of tinners snips with the strength of compound action Wiss® 10 1/2” T-65-M300 • Compound action multiplies the force of the hand by 5 times Multimaster Snip • Cutting capacity 20 gauge low carbon steel
29 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 snips
offset snips PIPE cutters
T-65GG T-65HH T-65-PC Mfg. ID M2007 Mfg. ID M2006 Mfg. ID MA71500
mini offset aviation snips
T-65-M6 T-65-M7 Mfg. ID AVM6EV Mfg. ID AVM7EV
Part # Product Name Product Description
• Serrated upper jaw offers solid gripping power with less burring Malco® Max 2000 Offset • A full 1 1/4” cutting length and a cutting plane offset from handles makes trim cuts T-65GG Snips - Green Handle both accessible and efficient • Cutting Capacity 18 gauge galvanized steel and 20 gauge stainless steel
• Serrated upper jaw offers solid gripping power with less burring Malco® Max 2000 Offset • A full 1 1/4” cutting length and a cutting plane offset from handles makes trim cuts T-65HH Snips - Red Handle both accessible and efficient • Cutting Capacity 18 gauge galvanized steel and 20 gauge stainless steel
• Easily goes to work in tight or awkward spaces where full-size aviation snips are Malco® Mini Offset T-65-M6 challenged. Overall Length 7 1/8” Aviation Snip - Red • A 3/4 inch (19 mm) length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels • The Malco Mini Aviation Snips offset design provides superior material flow in 24-gauge (0.61 mm) cold rolled and (0.71 mm) galvanized steel for making sharp Malco® Mini Offset T-65-M7 square cuts, tight 5 inch (125 mm) diameter circles and straight line cuts, even on Aviation Snip - Green curved surfaces
• Cuts round, oval and black pipe downspout Klenk® Pipe Cutter T-65-PC • Maximum opening jaws provide better bite Slot or Double Cut • Made of the finest hardened steel
30 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Fiber Glass & Duct Board Tools
Female shiplap tools T-130 Mfg. ID 2101 Female Shiplap Tool for 2” Ductboard T-138 Mfg. ID 1086 Female Shiplap Tool for 1 1/2” Ductboard T-145 Mfg. ID 1101 Female Shiplap Tool for 1” Ductboard Female Shiplap Tool cuts female slip joint, also cuts seating edge of duct board at longitudinal closure corner. Tool color: Black
Right modified shiplap Tools T-132 Mfg. ID 2104 Right Modified Shiplap Tool for 2” Ductboard T-139 Mfg. ID 1412 Right Modified Shiplap Tool for 1 1/2” Ductboard T-146 Mfg. ID 1402 Right Modified Shiplap Tool for 1” Ductboard Modified Shiplap Tool removes insulation for shiplap corner folds. Tool color: Orange
Left modified shiplap Tools T-133 Mfg. ID 2105 Left Modified Shiplap Tool for 2” Ductboard T-140 Mfg. ID 1413 Left Modified Shiplap Tool for 1 1/2” Ductboard T-147 Mfg. ID 1403 Left Modified Shiplap Tool for 1” Ductboard Modified Shiplap Tool removes insulation for shiplap corner folds. Tool color: Orange
Male Shiplap tools
T-134 Mfg. ID 2103 Male Shiplap Tool for 2” Ductboard T-141 Mfg. ID 1106 Male Shiplap Tool for 1 1/2” Ductboard T-148 Mfg. ID 1103 Male Shiplap Tool for 1” Ductboard Male Shiplap Tool cuts male slip joints which mates with female slip joints to connect two duct sections. Tool color: Yellow
Right/Left modified shiplap Tools T-135 Mfg. ID 2106 Right/Left Modified Shiplap Tool for 2” Ductboard T-142 Mfg. ID 1415 Right/Left Modified Shiplap Tool for 1 1/2” Ductboard T-149 Mfg. ID 1400 Right/Left Modified Shiplap Tool for 1” Ductboard Modified Shiplap Tool removes insulation for shiplap corner folds. Reversing the tool allows for both left and right hand shiplaps to be cut. Tool color: Orange
End cut-off tool (4 in 1 cut) T-136 Mfg. ID 2102 End Cut-Off Tool for 2” Ductboard T-143 Mfg. ID 1087 End Cut-Off Tool for 1 1/2” Ductboard T-153 Mfg. ID 1102 End Cut-Off Tool for 1” Ductboard End Cut-Off Tool cuts shiplap on end of board for longitudinal corner closure, plus staple flap. Tool color: Blue
Miter Cut or 90° Vee Groove Tool T-137 Mfg. ID 2100 Miter Cut or 90° Vee Groove Tool for 2” Ductboard T-144 Mfg. ID 1084 Miter Cut or 90° Vee Groove Tool for 1 1/2” Ductboard T-154 Mfg. ID 1100 Miter Cut or 90° Vee Groove Tool for 1” Ductboard Vee Groove Tool cuts 90° Vee Grooves for corner folds when modified shiplap grooving methods are not used. Tool color: Red
31 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Tackers & Staples
Red G-26 Outward Clinch Tacker Part # T-68AA Mfg. ID G-26 RED
• Designed for pipe and duct insulation • Designed to shoot STCR 2619 type fine wire staples to a 1/2” leg length • Outward clinch door is easily removable for front loading of staples or replacement
The G-26 uses the following Buckaroos® Brand Staples T-68V-38 Buckaroos® STCR 2619-3/8” Staples; 5,000 per box T-68V Buckaroos® STCR 2619-1/2” Staples; 5,000 per box T-68V4 Buckaroos® STCR 2619-1/2” Staples; 1 box contains 4 boxes of 1,250 T-68V-SS Buckaroos® STCR 2619-1/2” Stainless Steel Staples; 5,000 per box
Buckaroos® red & black G-26 outward buckaroos® red & Black g-5 outward clinch tackers clinch tackers T-68AA / T-68-BL26 T-68-5 / T-68-BL5 Mfg. ID G-26 Mfg. ID G-5
markwell® l4-cs outward Markwell® L3-CS outward clinch tacker clinch tacker T-68A T-68K Mfg. ID L4 Mfg. ID L3
markwell® pneumatic L3-OCA outward markwell® sc7 pneumatic hog ring gun clinch staple gun T-68-SC7 T-68OCA Mfg. ID SC7 Mfg. ID L3-OCA
32 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Tackers & Staples
Part # Product Name Product Description • Designed for pipe and duct insulation T-68AA Buckaroos® Red & Black G-26 • Designed to shoot Buckaroos STCR 2619 type fine wire staples to a 1/2” leg length T-68-BL26 Outward Clinch Tackers • Outward clinch door is easily removable for front loading of staples or replacement Staples Used in the G-26 Tackers - Buckaroos G-26 Outward Clinch Tackers are for use with Buckaroos Staples only. • Galvanized T-68V4 Buckaroos® STCR 2619-1/2” • Pocket Packs (4 boxes of 1,250) T-68V-SS & • Stainless Steel Buckaroos® STCR 2619-1/2” T-68V-SS-F • Bulk Packs (5,000/box) • Galvanized T-68V-38 Buckaroos® STCR 2619-3/8” • Bulk Packs (5,000/box)
• Designed for pipe and duct insulation T-68-5 Buckaroos® Red & Black G-5 • Similar to the Buckaroos Red G-26 Outward Clinch Tacker, the G-5 is designed to shoot T-68-BL5 Outward Clinch Tackers heavy duty STCR 5019 type staple to a 9/16’’ leg length • Outward clinch door is easily removable for front loading of staples or replacement Staples Used in the G-5 Tackers - Buckaroos G-5 Outward Clinch Tackers are for use with Buckaroos Staples only. • Galvanized T-68-5BQ Buckaroos® STCR 5019-9/16” • Pocket Packs (4 boxes of 1,000) • Galvanized T-68-5A Buckaroos® STCR 5019-1/2” • Bulk Packs (5,000/box) • Galvanized T-685-38 Buckaroos® STCR 5019-3/8” • Bulk Packs (5,000/box)
• Designed for pipe and duct insulation Markwell® L4-CS Outward T-68A • Rugged steel construction with a removable and easily replaceable outward clinch door Clinch Tacker • For use with Markwell’s L4 series fine wire staples up to a 1/2” leg length Staples Used in the L-4-CS Tacker • Galvanized T-68A Markwell® L4-D 1/2” Staple • Bulk Packs (5,000/box)
• Designed for pipe and duct insulation Markwell® L3-CS Outward T-68K • Rugged steel construction with a removable and easily replaceable outward clinch door Clinch Tacker • For use with Markwell’s L3 series heavy gauge staples up to a 9/16” leg length Staples Used in the L-3-CS Tacker • Galvanized T-68X Markwell® L3-D 9/16” Staple • Bulk Packs (5,000/box)
• Features an easily exchangeable patented outward clinch door • Bottom loading for quick staple loading Markwell® Pneumatic L3-OCA T-68OCA • Lightweight only weighs 2 pounds and ships in its own storage case complete with a 1/4” Outward Clinch Staple Gun NPT hose fitting • Designed to shoot Markwell Brand L3 Staples up to a 9/16” leg length Staples Used in the L3-OCA Pneumatic Tacker • Galvanized T-68X Markwell® L3-D 9/16” Staple • Bulk Packs (5,000/box)
• Used for assembling insulated blankets for heated pressure vessels and piping systems Markwell® SC7 Pneumatic • Attaching fabrics and sheet materials to wire in the automotive, upholstery, bedding, and T-68-SC7 Hog Ring Gun furniture industries • Connecting intersecting or parallel wires for cage, trap, and fencing assemblies Hog Rings Used in the SC7 Pneumatic Hog Ring Gun • Galvanized T-68-HR34 Markwell® 15-3/4” Hog Ring • 10,000 Hog Rings per Carton • Stainless Steel T-68-HR-SS Markwell® 15SS-100 Hog Ring • 10,000 Hog Rings per Carton
33 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Tackers & Staples
markwell® MP6-6 and Mp6-8 Bostitch® P6C-6 and P6C-8 stapling pliers Stapling Pliers T-68-MP6 / T-68-MP8 T-93 / T-99 Mfg. ID MP6-6 / MP6-8 Mfg. ID P6C-6 / P6C-8
markwell® HSP-12 Stapling plier Markwell® G-7 Hog ring plier T-68-HSP T-68Y Mfg. ID HSP-12 Mfg. ID G-7
bostitch® P-7 Hog Ring Pliers T-68-P7 Mfg. ID P7
STAPLES Replacement Parts Buckaroos® STCR 5019-1/2” Type Staples T-68-5A Markwell® L4-CS Outward Clinch Replacement Door T-68W Buckaroos® STCR 5019-9/16” Staples T-68-5BQ Markwell® L3-CS Outward Clinch Replacement Door T-68W-3 Buckaroos® STCR 5019-3/8” Type Staples (5M) T-685-38 Markwell® G-5 Outward Clinch Replacement Door T-68W-5 Markwell® L4D-1/2” Staples (5m/box) T-68B Markwell® G-5 Hardened Outward Clinch Replacement Door T-68W5-H Markwell® L3-1/2” Staples (5m/box) T-68M Markwell® G-26 Red Outward Clinch Replacement Door T-68WW Buckaroos® STCR 2619-3/8” Type Staples T-68V-38 Markwell® G-26 Hardened Outward Clinch Replacement Door T-68WWH Buckaroos® STCR 2619-1/2” Pocket Pack Staples T-68V4 Markwell® L3D-9/16” Staples (5m/box) T-68X Bostitch® STCR 2619-3/8” Staples T-92
Hog rings Markwell® 11/16” Galvanized Hog Rings (2,500/box) T-68Z-11/16 Markwell® HR616 11/16” Stainless Steel (2,500/box) T-68Z-11/16SS Markwell® Galvanized 3/4” Pneumatic Hog Rings 10M T-68-HR34
Markwell® Stainless Steel 3/4” Pneumatic Hog Rings 10M T-68-HRSS
34 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Tackers & Staples
Part # Product Name Product Description T-68-MP6 Markwell® MP6-6 & MP6-8 • Manufactured from heavy gauge, hardened steel, epoxy coated T-68-MP8 Stapling Pliers • Features top staple loading, no removable parts, and a deep reach throat depth Staples Used in the MP6-6 Stapling Pliers • Galvanized T-68V-38 Buckaroos® STCR 2619-3/8” • Bulk Packs (5,000/Box)
• Galvanized T-92 Bostitch® STCR 2619-3/8” • Bulk Packs (5,000/Box) Staples Used in the MP6-8 Stapling Pliers • Galvanized T-685-38 Buckaroos® STCR 5019-3/8” • Bulk Packs (5,000/Box)
• Galvanized T-92 Bostitch® STCR 2619-3/8” • Bulk Packs (5,000/Box)
• Case hardened steel components for extreme durability T-93 Bostitch® P6C-6 & P6C-8 • Ergonomic design and patented easy squeeze bearing system T-99 Stapling Pliers • Coated top-load magazine permits faster and smoother staple loading Staples Used in the P6C-6 Stapling Pliers • Galvanized T-68V-38 Buckaroos® STCR 2619-3/8” • Bulk Packs (5,000/Box)
• Galvanized T-92 Bostitch® STCR 2619-3/8” • Bulk Packs (5,000/Box) Staples Used in the P6C-8 Stapling Pliers • Galvanized T-685-38 Buckaroos® STCR 5019-3/8” • Bulk Packs (5,000/Box)
• Galvanized T-92 Bostitch® STCR 2619-3/8” • Bulk Packs (5,000/Box)
Markwell® HSP-12 • Heavy duty stapling plier designed for industrial applications T-68-HSP Stapling Plier • Rear loading, lightweight and easy to use / Ideal for duct wrap insulation
Staples Used in the HSP-12 Stapling Pliers • Galvanized T-685-38 Buckaroos® STCR 5019-3/8” • Bulk Packs (5,000/Box)
Markwell® G-7 • Great for removable and reusable insulation / Easy loading T-68Y Hog Ring Plier • Made to use the Ring 616-11/16” Hog Ring
Hog Rings Used in the G-7 Hog Ring Plier • Galvanized T-68Z-11/16 Markwell® 11/16” Hog Ring • 2,500 Hog Rings per Carton
• Stainless Steel T-68Z-11/16SS Markwell® HR616 11/16” • 2,500 Hog Rings per Carton
• Spring loaded magazine feed Bostitch® P-7 T-68-P7 • Case hardened steel components for extreme durability Hog Ring Pliers • Automatic feed system for easy use and productivity Hog Rings Used in the P-7 Hog Ring Plier • Galvanized T-68Z-11/16 Markwell® 11/16” Hog Ring • 2,500 Hog Rings per Carton
• Stainless Steel T-68Z-11/16SS Markwell® HR616 11/16” • 2,500 Hog Rings per Carton
35 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 trammel points, scribes, gauges, trowels
General tools® Trammel Points Malco® TR-18 Trammel Point T-74A T-74B Mfg. ID 523 Mfg. ID TR18
Malco® tr-42 trammel Point Malco® Trammel Replacement points T-74C T-74D Mfg. ID TR42 Mfg. ID TRP
Malco® sheet metal scribe No. 88 double butt gauge T-74F T-74G Mfg. ID A40 Mfg. ID #88
marshalltown® flexible marshalltown® Insulators english pointing trowel pointing trowel T-75A T-75B Mfg. ID 45 6A Mfg. ID 48A
marshalltown® bullnose marshalltown® insulators pointing trowel finishing trowel T-75D T-75E Mfg. ID 47A Mfg. ID MXS91
accu trowel full set Accu Trowel Short Set T-75G T-75H Mfg. ID full set Mfg. ID short set
36 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 trammel points, scribes, gauges, trowels
Part # Product Name Product Description
• Accurately measures, marks distances too great for conventional compasses and dividers General Tools® • For layouts, making templates, and drawing large circles T-74A Trammel Points • Points can be replaced with pencils, ball point pens, crayons, or soap sticks for marking various types of material
• Handles a variety of layout applications • All steel construction Malco® TR-18 T-74B • Points can be sharpened or replaced Trammel Point • Maximum radius of 18” • Replacement points available (T-74D)
• Can handle a variety of layout applications • All steel construction Malco® TR-42 T-74C • Points can be sharpened or replaced Trammel Point • Maximum radius of 42” • Replacement points available (T-74D)
Malco® Trammel T-74D • Replacement points for T-74B and T-74C Trammel Points Replacement Points
• Scribe commonplace trim lines on galvanized sheet metal quickly and accurately Malco® Sheet • Features ten pre-set scribing depths from 1/8” to 1” T-74F Metal Scribe • Each scribing depth features a dual edged point to create clean, readable, and accurate score lines parallel to the edge of the metal sheet
• Allows for scribing two different lines of measurement on any given surface, without No. 88 Double stopping and readjust for the second measurement T-74G Butt Gauge • Feature 6” adjustable bars and quality laser-inscribed measurements • The gauge is securely locked by a knurled clamp screw
• Very flexible blade Marshalltown® Flexible T-75A • Forged high grade steel Pointing Trowel • Hardwood handle with polished steel ferrule
• Forged from a single piece of high grade tool steel Marshalltown® Insulators T-75B • Tempered and carefully taper-ground and polished English Pointing Trowel • Flexible blade specially designed for working with insulation (7” x 3 3/8”)
• Forged from a single piece of high grade tool steel Marshalltown® Bullnose T-75D • Tempered and carefully taper-ground and polished Pointing Trowel • Flexible blade specially designed for working with insulation (5 1/2” x 1 7/8”)
• Highest grade hardened and tempered spring steel blade Marshalltown® Insulators T-75E • Beveled work edges prevent surface aggregate popping Finishing Trowel • Comfortable curved basil wood handle
• Made specifically for applying Polyguard RG-2400 to exposed piping • Saves labor & reduces material waste T-75G Accu Trowel Full Set • Precise coverage that is accurate to 25 mil thickness • Constructed of T304 Stainless Steel • Accutrowel Full Set includes the following sizes: 2”, 2.5”, 3”, 4”, 5”, 6”, 7”, 8”, 10” & 12”
• Made specifically for applying Polyguard RG-2400 to exposed piping • Saves labor & reduces material waste T-75H Accu Trowel Short Set • Precise coverage that is accurate to 25 mil thickness • Constructed of T304 Stainless Steel • Accutrowel Short Set includes the following sizes: 2”, 4”, 6”, 8”, & 12”
37 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 DIVIDERS & Insulation Depth Gauge
General tools® 8” Flat leg General tools® 12” Flat leg wing divider wing divider T-76A T-76B Mfg. ID 450-8 Mfg. ID 450-12
Malco® #18 RAD DIVIDERS Malco® #24 RAD DIVIDERS T-76D T-76E Mfg. ID 18 Mfg. ID 24
Osborne® wing DIVIDER 8” Osborne® wing DIVIDER 12” T-76L T-76M Mfg. ID 106-8 Mfg. ID 106-12
BUCKAROOS® Insulation depth gauge T-56DG Mfg. ID 050-62
Part # Product Name Product Description T-56DG Buckaroos® Insulation Depth Gauge • Measures up to 6” of pipe insulation • Perfect for a variety of uses including tracing contours and scribing circles in metal General Tools® 8” Flat T-76A • Forged from special caliper steel, with hardened points for marking and scribing Leg Wing Divider • Adjusting screw has a self seating washer and nut for quick adjustments • Perfect for a variety of uses including tracing contours and scribing circles in metal General Tools® 12” Flat T-76B • Forged from special caliper steel, with hardened points for marking and scribing Leg Wing Divider • Adjusting screw has a self seating washer and nut for quick adjustments • For circle sizes up to 32” in diameter T-76D Malco® #18 Rad Dividers • Points can be easily sharpened or replaced • Replacement points for the Malco Rad Divider (T-76F) • For circle sizes up to 42” in diameter T-76E Malco® #24 Rad Dividers • Points can be easily sharpened or replaced • Replacement points for the Malco Rad Divider (T-76F) T-76F Rad Dividers Replacement Points • Replacement points for the Malco Rad Dividers (T-76D & T-76E) • The nuts on the wings are made of solid steel, washers are made of turned brass • The springs are carefully tempered and are made for easy adjustment while holding the T-76L Osborne® Wing Divider 8” legs firmly in place • Forged polished steel construction • The nuts on the wings are made of solid steel, washers are made of turned brass • The springs are carefully tempered and are made for easy adjustment while holding the T-76M Osborne® Wing Divider 12” legs firmly in place • Forged polished steel construction
38 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Buckaroos Insulators Starter Kit Part # T-SK Mfg. ID T-SK
Starter Kit includes: T-9D Workhorse® 35 Pocket Tool Carrier T-13A Buckaroos® Red Pipe Caliper T-36RR Russell International® Curved Blade 6” Boning Knife T-36HB Dexter® #1376-HB Flexible Ham Boning Knife T-36UK Wiss® Utility Knife T-62C Accusharp® Knife Sharpener T-58B Stanley® Wallboard Saw T-58E Stanley® Shortcut Tool Box Saw T-45B Channellock® 8” End Cut Nippers T-56F Stanley® Diameter & Circumference Tape Measure T-56HV-1 Lufkin® 1/2” x 12’ Hi-Viz Orange P1000 Tape Measure T-60F Malco® Large Grip 3 1/2” Scratch Awl T-63P Clauss® 8” Stainless Steel Bent Trim Scissor T-65F Midwest Snips® Offset Aviation Snip - Green Handle T-65G Midwest Snips® Offset Aviation Snip - Red Handle T-75A Flexible Pointing Trowel
39 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113 Buckaroos, Inc. | www.buckaroos.com | 800-969-3113