DOCSLIB.ORG

Connectivity and Structured Cabling

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Connectivity and Structured Cabling Connectivity and Structured Cabling Product Catalog cinch.com Table of Contents Table of Contents RF Connectors & Adapters D-Subminiature Connectors & Modular Adapters 75 Ohm BNC Connectors . 5 D-Sub Crimp Kits . 26 Crimp-On 75 Ohm 3-Piece BNC Connectors . 5 D-Sub Hoods with Grommets . 26 Crimp-On 75 Ohm 2-Piece BNC Connectors . 6 98 & 99 Series Crimp Style D-Sub Connectors . 26 Twist-On 75 Ohm BNC Connectors . 6 94 Series Crimp Style High Density D-Sub Connectors . 26 75 Ohm BNC Adapters . 6 D-Sub Pins & Sockets . 27 True 75 Ohm 3-Piece Crimp-On Coinnectors . 7 D-Sub Termination Tools . 27 Twist-On 50 Ohm BNC Connectors . 8 D-Sub Hardware . 27 Chassis Mount 50 Ohm BNC Connectors . 8 D-Sub Stainless Steel Wallplates . 27 BNC Terminators & Attennator Pads . 8 97 & 95 Series Solder Style D-Sub Connectors . 28 2-Piece Crimp-On 50 Ohm BNC Connectors . 9 95 Series Solder Style High Density D-Sub Connectors . 28 3-Piece Crimp-On 50 Ohm BNC Connectors . 9 IDC Headers & D-Sub Connectors . 28 6-Piece Screw-On 50 Ohm BNC Connectors . .9 D-Sub Hoods . 29 50 Ohm BNC Adapters . 10 D-Sub Modular Adapter Kits (1- & 2-Piece Hood) . 29 50 Ohm ‘N’ Connectors, Adapters & Terminators . 11 Centronics Connectors . 29 Mini-UHF Connectors & Adapters . 12 UHF Connectors & Adapters . 13 Computer & LAN Cables Crimp-On 2 & 3 Piece TNC Connectors . 14 Premium Multi-Coax Monitor Cables . 30 Twist-On TNC Connectors . 14 VGA/SVGA Monitor Cables . 30 TNC Terminators & Adapters . 14 Universal Series Bus Cables (USB Ver . 2 .0) . 30 SMA Connectors & Adapters . 15 IEEE 1284 Parallel Printer Cables . 31 Strain Relief Boots & Hoods for Coaxial Connectors . 15 Bi-Directional Parallel Printer Cables . 31 Stainless Steel Wallplates . 15 Serial DB9 Extension Cables . 31 D-Sub Switch Boxes & Cables . 31 ‘F’ Connectors & Adapters Serial Modem Cables . 32 Weatherproof ‘F’ Connectors . 16 AC Power Cables . 32 ‘F’ 56 Series Connectors for RG-6 . 16 D-Sub Gender Changers & Adapters . 32 ‘F’ 59 Series Connectors for RG-59 . 17 ‘F’ Connectors for RG-11 . 17 Coaxial Cables ‘F’ Series Splice Adapters . 18 Deluxe RCA Audio Cables with Gold Connectors . 33 ‘F’ Connector - Chassis & PCB Mount . 18 RCA Audio/Video/Speaker Cables . 33 ‘F’ Series Adapters . 19 Wallplate with Gold RCA Jacks . 33 ‘F’ Voltage Blocks & Attenuator Pads . 19 Audio Cables & Adapters . 34 Quick Selector–Connector to EMERSON Tool Guide . 20, 21 Super VHS Video Cables . 34 HDMI & DVI Cables . 34 Audio/Video Connectors & Adapters 75 Ohm ‘F’ to ‘F’ Hook-Up Cables . 35 RCA Connectors . 22 Silver Satin Flat Cables . 35 RCA Gold Series Adapters . 22 Coaxial LAN & Video Cables . 35 Weatherproof ‘F’ Compression Connectors . 16, 23 Custom Made Coaxial Cables . 36, 37 RCA Standard Series Adapters . 24 3 .5 mm Connectors . 24 Fiber Optic Cables Microphone Connectors . 24 Single & Multi-Mode Fiber Optic Patch Cables . 38 Audio Adapters . 24 1/4” Mono & Stereo Connectors . 25 Network Cable Assemblies Banana Plugs & Jacks . 25 Category 5E & 6 Patch Cables . 39 Bulk Cable Silver Satin Cable . 40 Cat5E & Cat6 Stranded Patch Cable Wire . 40 Table of Contents Modular Plugs & Adapters Modular Plugs . 40 Tools & Test Equipment RJ45 Snagless Boots . 40 Network Installer Kit . 50 Telephone Butt Splices . 41 Cable & Network Test Equipment . 50 Modular Couplers & Adapters . 41 Cable Tester Kits . 50 Modular Termination Tools . 41 Pro-Series 110 & 66 Impact Punch Down Tools . 51 Impact & Non-Impact Punch Down Tools . 51 Voice & Data Structured Cabling Modular Plug Crimping Tools . 52 Category 5E & 3 Keystone Jacks . 42 Wire Stripping Tools & Cutters . 52 Keystone Inserts . 42 D-Sub Crimping & Termination Tools . 53 Keystone Wallplates . 42 D-Sub Insertion Tools . 53 Category 5E Patch Panels . 43 ‘F’ Coaxial Crimping Tools . 54 110 Blocks & Connectors . 43 Economy ‘F’ Series Crimping Tools . 54 66 Block & Bracket . 43 Heavy Duty ‘F’ Hex Crimping Tools . 54 Wire Management Systems . 43 Universal Coaxial Crimping Tools . 54 Hinged Patch Panel Brackets . 43 Standard Series Ratchet Crimping Tools . 55 Modular Surface Mount Boxes . 44 Offset Ratchet Crimping Tools . 55 Modular Telephone Wallpates . 44 Self-Adjusting Coax Strippers . 56 TV/CATV Devices 3-Step & 2-Step Coax Strippers . 56 CATV Splitters - 5 MHz to 900 MHz . 45 Nylon Cable Ties . 57 Tool & Work Bench Accessories . 57 CATV Power Passing Splitters - 5 MHz to 900Mhz . 45 Power Supplies & Adapters CATV Drop Taps - 5 MHz to 1000 MHz . 45 AC Surge Protectors . 58 Power Passing Drop Taps - 5 MHz to 900 MHz . 46 AC/DC Power Supplies . 58 Blocking Coupler . 46 AC Power Converters for Foreign Travel . 58 Digital Couplers/Drop Taps by Viewsonics® . 46 AC/DC Power Adapters . 58 CATV 12 & 16-Way Splitters - 5 MHz to 1 GHz by Viewsonics® . 47 CATV Digital Splitters - 5 MHz to 1 GHz by Viewsonics® . 47 Index . 59-64 CATV Digital Amplifiers - 54 MHz to 1 GHz by Viewsonics® . 47 CATV Coaxial Amplifiers - 54 MHz to 900 MHz, 5 MHz to 500 MHz 48 Aim & Cambridge Cross-Reference . 64, 65 ‘F’ Attenuator Pads . 48 CATV Modulator & Combiner . 48 Coaxial Connector Termination Instructions . 66 TV/CATV/Satellite - F-81 Wallplates . 49 TV/CATV/VCR - Matching Transformers . 49 CATV/SATV Accessories . 49 4 RF Connectors & Adapters We have been offering a complete line of quality RF connectors for over 25 years. Available in 50 and 75 ohm versions, these connectors are designed to offer the highest quality data transmission for audio, video and data applica- tions, and are available in BNC, ‘N’ UHF, Mini-UHF, TNC, SMA and ‘F’ versions. If you are looking for preassembled RF cables, our custom cable department offers the capability to build any assembled or molded cable to your custom length or configuration using any of these connectors and more. 75 Ohm BNC Connectors Crimp-On 75 Ohm 3-Piece BNC Connectors Electrical Characteristics Impedance 75 Ohm Working voltage 500 volts, RMS at sea level Frequency range 0-2 GHz with low reflection Contact resistance Outer-0.2 milliohms Crimp BNC (M) Center-2.1 milliohms 3 Piece (.000050 gold) Insulation resistance 5,000 megohms minimum Dielectric withstanding voltage 1,500 volts, RMS at sea level Corona Level 375 volts minimum at 70,000 ft. Part No . Compatible Cable Crimper Stripper 28-91007 (CPMC782) Belden 1505A, 24-9959P 24-7732P Environmental Characteristics RG-59, RG-62 Recommended 28-91027 (CPMC785) Belden RG-6 24-8856P 24-7733P temperature range -55 C to +85 C 28-91037 (CPMC7810) Belden 1506A, 24-9958P 24-7733P Vibration MIL-Std. 202 RG-59TFE & RG-62TFE Shock MIL-Std. 202, 100Gs 28-91047 (CPMC783) Belden 8281, 9141, 9231 24-8859P 24-7733P Moisture resistance MIL-Std. 202 28-91057 (CPMC7818) Belden 8218, 1855A, 735A 24-9912P 24-7734P 28-91457 Belden 9248, 1694A 24-8856P 24-7733P Mechanical Characteristics 28-91477 Belden 8221, 8241, 24-8789P 24-7736P Durability 500 Cycles (.000050 gold) 8263, 8279, 9244 Force to engage/disengage 3 lbs. maximum 28-91507 Belden 82259, 89259 24-8789P 24-7736P Coupling nut retention 60 lbs. maximum CPMC7820 RG-179, RG-187 24-9912P 24-7733P Cable retention 60 lbs. with 95% braid coverage - RG58c/u cable Materials Body Zinc Contact.
Load more

Recommended publications
  • XO2 and XO3: Low Jitter CD Clock Oscillators
    Mounting instructions for: XO2 and XO3: low jitter CD clock oscillators Congratulations! You just bought a high quality, low jitter master clock oscillator. This document gives guidance to mounting and connecting it in your CD player. Introduction XO2 and XO3 are equal, except the reclocking option for XO3. XO2 and XO3 S Need to be supplied from a DC voltage of 9 to 35V, approximately 30mA. S Generate a new clock, which needs to be fed to the input of the original oscillator XO3 additionally needs: S to be fed with the original SPDIF signal (generated by the decoder chip) S the newly generated SPDIF signal to be connected to the original, or new digital output Mounting Mounting your XO is not that difficult. However some experience is needed to: S recognise and locate components S find specific connections and IC pin numbers S measure voltages using a multimeter S careful soldering of small parts If you feel lack of skills and or experience in some of the above listed subjects, please ask someone else to support you. Know your connections What is on the PCB XO, heart of the circuit Low noise adjustment - do not touch ! Supply (9-35Vdc/30 mA) SPDIF in Clock out SPDIF outputs The supply and SPDIF in (XO3 only) and clock out (XO2 and XO3) are already equipped with wiring. The supply wire may be extended using normal gauge wire, the others may not. If longer wiring is required, the use of coax is advised. Please contact me. Guido Tent can be contacted for questions and orders at: [email protected] 1 How to connect XO2 or XO3 in your player General Read these full instructions below, before starting any work.
    [Show full text]
  • Ultrasonic Transducers WEDGES, CABLES, TEST BLOCKS
    PANAMETRICS Ultrasonic Transducers WEDGES, CABLES, TEST BLOCKS • Contact • Dual Element • Angle Beam • Shear Wave • Delay Line • Protected Face • Immersion • TOFD • High FrequencyHigh Frequency • Atlas European Standard Atlas European Standard 920-041E-EN The Company Olympus Corporation is an international company operating in industrial, medical and consumer markets, specializing in optics, electronics and precision engineering. Olympus instruments contribute to the quality of products and add to the safety of infrastructure and facilities. Olympus is a world-leading manufacturer of innovative nondestructive testing and measurement instruments that are used in industrial and research applications ranging from aerospace, power generation, petrochemical, civil infrastructure and automotive to consumer products. Leading edge testing technologies include ultrasound, ultrasound phased array, eddy current, eddy current array, microscopy, optical metrology, and X-ray fluorescence. Its products include flaw detectors, thickness gages, industrial NDT systems and scanners, videoscopes, borescopes, high-speed video cameras, microscopes, portable x-ray analyzers, probes, and various accessories. Olympus NDT is based in Waltham, Massachusetts, USA, and has sales and service centers in all principal industrial locations worldwide. Visit www.olympus-ims.com for applications and sales assistance. Panametrics Ultrasonic Transducers Panametrics ultrasonic transducers are available in more than 5000 variations in frequency, element diameter, and connector styles. With more than forty years of transducer experience, Olympus NDT has developed a wide range of custom transducers for special applications in flaw detection, Visit www.olympus-ims.com to receive your free weld inspection, thickness gaging, and materials analysis. Ultrasonic Transducer poster. Table of Contents Transducer Selection . 2 Immersion Transducers .........................20 Part Number Configurations ......................4 Standard................................
    [Show full text]
  • Datapath-Fx4 Spec Sheet
    Fx4 One box. Four outputs. Millions of possibilities. HIGH PERFORMANCE CONTROLLER FEATURES Advancements in digital signage allow much greater freedom in creating Infinite creative configurations and deploying any scale signage projects. At the forefront of this is the UHD / 4K60 input, four HD 1080p outputs Datapath Fx4, a multi-faceted stand alone display controller. The Fx4 Rotates, crops, scales, mirrors and bezel corrects supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in either DisplayPort or HDMI. Multiple inputs for flexible connectivity (Dual HDMI1.4 or single DisplayPort1.2 inputs) The Fx4 features a DisplayPort1.2 main input alongside two HDMI1.4 inputs HDCP1.4 support on all inputs and outputs offering 4K 4096 x 2160p at 60fps. The intuitive user interface allows users to determine which input is used. True stand-alone operation: Fx4 can adapt to changes in inputs by adjusting all scale factors Network or USB interfaces allow platform independent control (MAC OSX 10.6 & later) Pre-load an image for use when signal is not detected Engineering the world’s best visual solutions Next generation display wall controller ADDITIONAL FEATURES WALL DESIGNER Each output monitor can take its input from any region of the input image Datapath’s hugely popular multi-screen design tool, Wall Designer has also as all of the required cropping, scaling, rotation and frame-rate conversion been updated to incorporate Fx4. Wall Designer allows users to add displays is handled by the Fx4 hardware. These regions can overlap to allow any from the ever expanding database of monitors, visualise their content by output to replicate another or can be configured to support any creative adding inputs and adjusting display regions and finally instantly program splice of the source material.
    [Show full text]
  • HDMI/DVI-D SDI Converter/Extender
    HDMI/DVI-D SDI Converter/Extender User Manual English No. 38196 - 3G SDI to DVI-D No. 38197 - DVI-D to 3G SDI No. 38198 - 3G SDI to HDMI No. 38199 - HDMI to 3G SDI www.LINDY.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (July 2012) English User Manual Introduction Thank you for buying one of the products from the LINDY HDMI/DVI-D SDI Converter/Extender range. This range of products gives you the ability to integrate SDI and DVI-D/HDMI equipment or when used in combination, extend DVI-D or HDMI signals up to 100m using low cost coaxial cable. This hardware based solution is ideal for professional use to extend DVI-D or HDMI signals over coaxial cable, display SDI signals on DVI-D/HDMI displays or DVI-D/HDMI signals on SDI displays. Auto-video mode detection for SD/HD/3G and Plug & Play installation make for a simple setup; with the added functionality of being able to use either internal or external audio sources at the flick of switch. Features • Convert SDI signals for use with DVI-D/HDMI displays or DVI-D/HDMI signals with SDI displays. • Automatic video mode detection (3G/SD/HD) • Integrated audio de-embedding for a maximum of 8 channels of 48 kHz audio • Supports input SDI signal transmission distances up to 300m for SD signals / up to 200m for HD signals / up to 100m for 3G signals • Supports SMPTE standards 259M-C, at bitrates of 270 Mbit/s, SMPTE 292M, at bitrates of 1.485 Gbit/s or 1.485/1.001 Gbit/s, 424M/425M-AB, at bitrates of 2.970 Gbit/s and 2.970/1.001 Gbit/s • Up to 100m HDMI/DVI-D signal extension
    [Show full text]
  • Types of BNC Connectors
    Types of BNC Connectors The BNC (Bayonet Neill–Concelman) connector is a miniature quick connect / disconnect radio frequency connector used for coaxial cable. It features two bayonet lugs on the female connector; mating is fully achieved with a quarter turn of the coupling nut. BNC connectors are most commonly made in 50 ohm and 75 ohm versions, matched for use with cables of the same characteristic impedance. The 75 ohm connector is dimensionally slightly different from the 50 ohm variant, but the two nevertheless can be made to mate. The 75 ohm types can sometimes be recognized by the reduced or absent dielectric in the mating ends but this is by no means reliable. There was a proposal in the early 1970s for the dielectric material to be coloured red in 75 ohm connectors, and while this is occasionally implemented, it did not become standard. The 75 ohm connectors are typically specified for use at frequencies up to 2 GHz. 75 ohm BNC connectors are primarily used in Video (particularly HD video signals) and DS3 Telco central office applications. Many VHF receivers use 75 ohm antenna inputs, so they often used 75 ohm BNC connectors. The 50 ohm connectors are typically specified for use at frequencies up to 4 GHz. 50 ohm connectors are used for data and RF. A 95 ohm variant is used within the aerospace sector, but rarely elsewhere. It is used with the 95 ohm video connections for glass cockpit displays on some aircraft. Compatibility The different versions are designed to mate with each other, and a 75 ohm and a 50 ohm BNC connector which both comply with the 1978 standard, IEC 169-8, will mate non-destructively.
    [Show full text]
  • DCH6200 Specification Sheet
    MODEL DCH6200DCH6200 ANALOG/DIGITAL, HDTV, M-CARD™ HOST SET-TOP DCH6200 , M op T - t - t log , HD A l t na Se / ts a dV i ™ Ho g C r i D a The Motorola DCH6200 analog/digital HD Host set-top provides a full set of SDTV, HDTV, and data features and interfaces. In addition to high-definition digital video, the DCH6200 provides superior analog picture quality with dual-channel 3-D comb filters and motion- compensating noise reduction. The DCH6200 supports a wide range of current and future interactive applications running on Motorola’s existing DCT legacy APIs. Features M-Card (Multi-stream CableCARD) Host support for Single-channel MPEG-2 encoder for analog content conditional access Dolby™ Digital 5.1 and PCM audio Compatible with Motorola DCT legacy APIs 32 MB Flash (standard) Standard-definition (SD), enhanced-definition (ED), and high-definition (HD) MPEG-2 video support with output 128 MB DRAM total (standard) scaled to 480i, 480p, 720p, or 1080i DOCSIS® 2.0 cable modem with support for DSG Single 54 to 864 MHz video tuner RF out-of-band (OOB) data transmitter/receiver Digital video (64 QAM/256 QAM) On-screen diagnostics Video scaling (Picture-in-Graphics) Macrovision™, HDCP, 5C DTCP, and CGMS-A content Accelerated graphics protection schemes on the respective interfaces Motion-compensating temporal filter video noise Full-featured front panel display and controls reduction Motion-adaptive de-interlacing Integrated 3-D comb filter for state-of-the-art color and resolution www.amt.com SPECIFICATION SHEET DCH6200 Set-top Box STANDARD
    [Show full text]
  • HDMI® EXTENDER Over Single Coax Cable
    HDMI® EXTENDER over single Coax Cable Vanco Part Number EVEX2004 HDMI® Extender over Single Coax Cable www.vanco1.com • 800.626.6445 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. WARNING 1. Do not expose this unit to water, 6. Only clean unit with a dry cloth. moisture, or excessive humidity. 7. Unplug unit during lightening storms 2. Do not install or place this unit in or when not used for an extended a built-in cabinet, or other confined period of time. A surge protector is space without adequate ventilation. strongly recommended. 3. To prevent risk of electrical shock or 8. Protect the power cord from being fire hazard, due to overheating do not walked on or pinched, particularly at obstruct unit’s ventilation openings. the plugs. 4. Do not install near any source of 9. Use unit only with accessories heat, including other units that may specified by the manufacturer. produce heat. 10. Refer all servicing to qualified 5. Do not place unit near flames. personnel. CAUTION HDMI is a very complex technology requiring continuous authentication of the signal and the same video resolution and audio settings on all electronic equipment in the system. When there are multiple sources and displays, the video resolution and audio setting on all connected units must be adjusted to correspond with that of the display having the lowest video and audio capability.
    [Show full text]
  • Procom-Marine Antennas
    MARINE ANTENNAS Amphenol Private Networks PROCOM - Making the world smaller www.procom.dk Marine Antennas Table Of Content Home 1 S.M2 4 S.8Y series 7 S.6Y series 10 S.4Y series 13 S.3Y series 16 S.2Y series 20 S.1H series 23 S.1 series 26 RX 5000 29 TWA 1 31 SF 160/... 33 NTA 3E-SHT 36 Marifix 1 / Marifix 2 / ADT / MBS 38 MARCELL 3+ 42 MARCELL 47 MA DAB SC 51 MA 70/GPS 4/... 54 MA 2-1 SC-SHT 59 MA 2-1 SC 62 MA 2-1 MR 65 GPS 2000 68 GPS 100 KT-FME 73 GP 80 B/... 76 GP 80/160 78 GP 80 80 GP 450-3/... 82 HF 7500-3 84 GP 450/... 86 HF 5000 88 GP 40 90 GP 160 B 92 GP 160 5/8 94 GP 160 96 CXL 2400-6LW/... 99 CXL 2400-3/... 102 CXL 2/70C 105 CXL 2-5HD/... 108 CXL 2-3LW/... 111 CXL 2-3C/... 114 CXL 2-3 117 CXL 1800-6/DECT 120 CXL 2-2C 123 CXL 2-1LW/... 126 CXL 2-1/... 129 CXL 108-185C 132 BCL 1-KA 135 Page 2/254 Marine Antennas AAC 1/... 139 CXL VHF/GSM 142 CXL 800-1/... 145 CXL 900-3/... 147 CXL 900/1800/1900/UMTS 150 CXL 450-3LW-SS 153 CXL 450-6HD/T-X/... 156 CXL 70-3C/... 159 G-CXL 2-2C 162 G-CXL 2-1LW/... 165 CXL 5700-6 168 CXL 5700-3 171 CXL 5200-6LW 174 CXL 5700-1/..
    [Show full text]
  • Transducer Catalog
    Transducer Catalog Version 3.1 www.ndtsystems.com Company Introduction For more than 48 years, NDT Systems Inc. has been a leader in designing, manufacturing, and selling high quality, advanced ultrasonic testing and bond testing equipment to the non-destructive testing marketplace. Our wide variety of non-destructive testing equipment includes: • Thickness Gauges • Bond Testers and Probes • Portable Ultrasonic Flaw Detectors • Precision Ultrasonic Transducers • Manual and Automated Scanners NDT Systems manufactures customized solutions, including fully automated inspection systems and specialized transducers. These transducers are available in all frequency domains and upon request. Based in Huntington Beach, California, NDT Systems offers a wide portfolio of products to support the inspection of almost all materials types from metals, ceramics, and plastics to advanced composite materials and laminated structures. NDT Systems products are used in nearly all industries such as Aerospace and Composite Inspection/ Manufacturing, Oil and Gas (pipeline inspection), Power Generation, Military and Transportation, and Metal Forming. Our high-quality equipment offers full functionality at a very competitive price. All products are 100% made in the USA 2 www.ndtsystems.com Ultrasonic Transducers NDT Systems takes pride in its vast transducer offerings. We manufacture and inventory a wide range of transducers, in addition to accessories that support the range. All transducers are certified prior to shipment. A recharacterization service is also available, based upon applicable standards. Our complete range of transducers and accessories includes: • Contact / Delay Line • Dual Element • Angle Beam • Immersion • Bond Testing • Gauge Specific • Scanner Specific • Cables • Test Blocks Custom Design Transducers NDT Systems has the ability to engineer custom design transducers, upon request, to meet your specific needs.
    [Show full text]
  • Blackbird™ 4K 2X7 Hdbaset™ Splitter Kit User's Manual
    MONOPRICE Blackbird™ 4K 2x7 HDBaseT™ Splitter Kit P/N 24178 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES ....................................................................................................................................... 3 INTRODUCTION ................................................................................................................................................................................................ 4 FEATURES .............................................................................................................................................................................................................. 5 CUSTOMER SERVICE .................................................................................................................................................................................... 5 PACKAGE CONTENTS ................................................................................................................................................................................. 6 PRODUCT OVERVIEW ................................................................................................................................................................................. 6 Splitter ............................................................................................................................................................................................................... 6 Receivers ........................................................................................................................................................................................................
    [Show full text]
  • Desktop Solutions Cables to Go® Desktop Solutions Provide PC Desktop and Laptop Users Increased Functionality, Flexibility and Value from Their Systems
    DESKTOP SOLUTIONS Cables To Go® Desktop Solutions provide PC desktop and laptop users increased functionality, flexibility and value from their systems. From all line cables to UXGA monitor cables and everything in-between, Cables To Go has the right accessories to enhance virtually any computer application. No other manufacturer provides the same product depth, quality and expertise as Cables To Go. Having multiple computers in the home or office is now commonplace, and with TruLink® KVMs from Cables To Go users can control multiple systems with a single keyboard, mouse and monitor. TruLink KVMs eliminate redundant desktop peripherals, conserving space and power while ­­­providing complete control through multiple systems. Built with the finest chip sets and featuring sturdy, all-metal housings, TruLink KVMs are designed for years of hassle-free connectivity. See our full listing of KVM switches and cables starting on page 16. To provide users greater flexibility with their PC’s DVI and VGA video ports, Cables To Go offers a wide range of cables, signal extenders and signal selectors. These cables and devices provide users enhanced control, power and flexibility. See our innovative VGA and DVI solutions starting on page 11. USB has replaced SCSI, parallel and serial connections as the preferred desktop connectivity bus. With USB cables, adapters and hubs from Cables To Go, users gain control and flexibility through the common USB interface. See our complete listing of USB accessories starting on page 17. Cables To Go also provides complete connectivity solutions for FireWire®, parallel, serial, SCSI, IDE, SATA, Cat5e and Cat6, power and cable management.
    [Show full text]
  • Dch3416dch3416 All-Digital, Hdtv, Dual-Tuner Dvr M-Card™ Host Set-Top
    MODEL DCH3416DCH3416 ALL-DIGITAL, HDTV, DUAL-TUNER DVR M-CARD™ HOST SET-TOP V R, M r D op e n - t - u t t Se s d ™ Ho C r a T DCH3416l ua , D - T l A , HD l l - ta V i g i D The Motorola DCH3416 all-digital HD DVR Host set-top provides a full set of SDTV, HDTV, and data features and interfaces. The DCH3416 supports a wide range of current and future interactive applications running on Motorola’s existing DCT legacy APIs. Features M-Card (Multi-stream CableCARD) Host support for Accelerated graphics conditional access Motion-adaptive de-interlacing Digital Video Recording (DVR) with support for dual recording and watch-and-record functionality Dolby™ Digital 5.1 and PCM audio 160 GB hard drive with shock mounting and fan 16 MB Flash (standard) Compatible with Motorola DCT legacy APIs 128 MB DRAM total (standard) Standard-definition (SD), enhanced-definition (ED), and DOCSIS® 2.0 cable modem with support for DSG high-definition (HD) MPEG-2 video support with output scaled to 480i, 480p, 720p, or 1080i RF out-of-band (OOB) data transmitter/receiver Dual 54 to 864 MHz video tuners On-screen diagnostics Digital video (64 QAM/256 QAM) Macrovision™, HDCP, 5C DTCP, and CGMS-A content protection schemes on the respective interfaces Video scaling (Picture-in-Graphics) Full-featured front panel display and controls www.amt.com SPECIFICATION SHEET DCH3416 Set-top Box STANDARD INTERFACES Front Panel On/Standby and Message indicators, output video format indicator, 4-character 7-segment display, 2 recording indicators, IR remote control sensor, USB
    [Show full text]