WD40PURX-64GVNY0
Test Report
Initiated by River Lin Approved by Jackie Wang
Page 1 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Revision History：
Date Revision Description Creator 2014/04/28 V1.0 The First version released.
Page 2 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Results Definition：
Criteria Definition
PASS Test result pass and function work perfectly.
Fail Test fail or can not meet the spec requirement.
Limitation There are no plans to fix this function.
N/A Spec not support or driver not ready.
No Test No test tool or device or FW not ready, please write reason to the “Remark”.
Page 3 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Results Summary：
Num. Test Item Result Remark Chapter 1 Function Test 1.01 HDD Function Test PASS 1.02 SATA IDE Mode Test PASS 1.03 SATA AHCI Mode Test PASS 1.04 SATA RAID Mode Test PASS Chapter 2 Software Compatibility Test 2.01 OS and Driver Install Test PASS Chapter 3 Hardware Compatibility Test 3.01 CPU Board Compatibility Test PASS Chapter 3 System Reliability Test 4.01 Power On/Off Test PASS 4.02 Warm Boot Stress Test PASS 4.03 ACPI Cycling Burn-in Test PASS 4.04 Full System, I/O Integrated Stress Test PASS
Page 4 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Table of Contents
Revision History： ...... 2
Test Results Definition： ...... 3
Test Results Summary： ...... 4
Table of Contents ...... 5 Product Information： ...... 6
Platform Configuration: ...... 7 Test Programs： ...... 10
Test Equipments： ...... 11
Chapter 1：Function Test ...... 13
1.01 HDD Function Test...... 13 1.02 SATA IDE Mode Function Test ...... 14 1.03 SATA AHCI Mode Function Test ...... 15 1.04 SATA RAID Mode Function Test ...... 17 Chapter 2：Software Compatibility Test ...... 18
2.01 OS and Driver Install Test ...... 18 Chapter 3：Hardware Compatibility Test ...... 20
3.01 CPU Board Compatibility Test ...... 20 Chapter 4：System Reliability Test ...... 21
4.01 Power On/Off Test...... 21 4.02 Warm Boot Stress Test ...... 22 4.03 ACPI Cycling Burn-in Test ...... 22 4.04 Full System, I/O Integrated Stress Test ...... 23 Chapter 5：System Performance Test ...... 25
5.01 HDD Performance Test ...... 25
Page 5 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Product Information：
Item. Description. Advantech Part Number 96HD4TB-ST-WD5KA Manufacturer Western Digital Model Number WD40PURX-64GVNY0 From Factory 3.5” Interface SATAIII Capacity 4TB Cache Capacity 64MB Rotation Speed(RPM) intellipower Host Transfer Rate 6GB Bytes per Physical Sector 512(Hst)/4096(Physical) Number of Disks 4 Power On Hour(POH) 8760 Annualized Failure Rate (AFR) <0.9%/1000000 hours /MTBF Voltage Tolerance +5.0V ± 5% and +12.0V ± 10%. Operating Temperature 0°C to 65°C Firmware 80.00A80 Country of Origin Thailand Dimension (W x H x D) 26.1mm x 147.0mm x101.6mm RoHS Status (Yes/No) Yes
Page 6 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Platform Configuration: PCE-7128 Item. Description. M/B Name PCE-7128 PCB Version. A101-3 BIOS Version. 7128X006 Backplane Model. PCE-5B06-03 Backplane Verson. A101-2 CPU Model/Info Intel® Xeon® CPU E3-1275 v3 @3.5GHz Memory Type/Info/Size DDR3 1600 4G*2 Apacer 78.B1GCE.AF1 PCH Chipset Intel C226 PCH Graphic Controller Intel HD Graphic GT2 LAN1 Controller Intel® I217 LAN2 Controller Intel® I210
PCE-5127 Item. Description. M/B Name PCE-5127 PCB Version. A101-3 BIOS Version. 5127X020 Backplane Model. PCE-5B06-03 Backplane Verson. A101-2 CPU Model/Info Intel® i7-3770 3.4GHz Memory Type/Info/Size DDR3 1600 4G*2 Apacer 78.B1GCE.AF1 PCH Chipset Intel QM77 PCH Graphic Controller Intel HD Graphic LAN1 Controller Intel® 82579LM LAN2 Controller Intel® 82583V
AIMB-581 Item. Description. M/B Name AIMB-581
Page 7 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
PCB Version. A101-3 BIOS Version. A581X057 CPU Model/Info Intel® i7-2600 3.4GHz Memory Type/Info/Size DDR3 1600 4G*2 Apacer 78.B1GCE.AF1 PCH Chipset Intel QM67 PCH Graphic Controller Intel HD Graphic Audio Codec ALC892 LAN1 Controller Intel® 82579LM LAN2 Controller Intel® 82583V
MIO-5271 Item. Description. Project Name. MI0-5271 PCB Version. A101-3 BIOS Version. 5271X017 EC Version I2865X0101 CPU Model/Info Intel® Celenron® 2980U@ 1.60GHz Memory Type/Info/Size DDR3L-1600 4GB Apacer 78.B2GCR.AF10C PCH Chipset Lynx Point-LP PCH QM87 Graphic Controller GT3 Graphics, Generation 7.5 graphics core architecture Audio Codec ALC888S LAN1 Controller Intel i218 LAN2 Controller Intal i210
MIO-5290 Item. Description. Project Name. MIO-5290 PCB Version. A101-2 BIOS Version. 5290X015. EC Code Version. I1809X0100 CPU Model/Info Intel i3-3217UE @ 1.70GHz Memory Type/Info DDR3 1333 2GB Apacer 78.A2GC9.4200C
Page 8 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Total Memory Size 8GB PCH Chipset QM77 Graphic Controller VGA Function was supported intel PCH Audio Codec ALC892 LAN1 Controller Intel® 82579LM LAN2Controller Intel® 82583V
Page 9 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Programs：
Test Program Version HD Tach V3.0.4.0 HD Tune Pro V5.5 CrystalDiskMake V3.0.3 ATTO Disk V2.46 PassMark Burn-In Test Pro V7.1 build 1017 PassMark Rebooter V1.3 build 1004 PassMark Sleeper V2.3 build 1009 Power on/off V3.3
Page 10 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Equipments：
Model Description
Power on/off test equipment (ATX/AT)
Page 11 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Page 12 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 1：Function Test 1.01 HDD Function Test 1.01.01.01 Test Purpose： The purpose of SATA test is to analyze and validate the functional、performance capabilities、quality and stability. 1.01.01.02 Test Standard： Please refer to the Project Hardware and BIOS specification. 1.01.01.03 Test Tool： 1. SATA cable 2. SATA HDD 3. SATA DVD-ROM 1.01.01.04 Test Criteria： 1. The BIOS must detect SATA devices information. 2. The SATA function can install OS and work well on OS without hang, restart, or blue screen or any problems. 3. The Device Management can not have any exclamation point and question mark. 4. Mark sure pass w/program without any error ocurrs. 1.01.01.05 Test Procedure： 1. Insert SATA HDD and DVD-ROM into the DUT 2. The BIOS detect SATA port HD correct information. 3. Install OS and all drivers. 4. SATA HDD can be copy/del/read/write file. 5. Install the PassMark BurnIn Pro program, and setting : (a) Select tests to perform and their duty cycle: Select Disk(s) and Optical Drive(s)/ 100% Loading/Auto Stop After : 30Minutes. (b) Set test preferences: Select “Disk”-> Select Test this drive/ set File size: 15(% of disk), other setting value keep defaults Preference. (c) Then Press “Start selected tests” for test. 6. After finished testing, the test result will show on screen. 7. Change other port, and repeat 1~6. 1.01.01.06 Test Data：
Page 13 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Item Description Result Remark Post information POST should show the correct model name PASS BIOS information BIOS detect correct information PASS Device Management can not have any exclamation Device Manager PASS point and question mark, and detect correct information Install OS &driver Can install OS and driver PASS Mark should all SATA port can detect and reboot SATA Port PASS shutdown BurnIn Running passmark 30mins PASS
1.02 SATA IDE Mode Function Test Page 14 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
1.03.01.01 Test Purpose： The purpose of this test is to ensure the functional of the SATA IDE Mode. 1.03.01.02 Test Standard： Please refer to the Project Hardware and BIOS specification 1.03.01.03 Test Tools： 1. SATA HDD 2. SATA DVD-ROM 3. PassMark Burn In test Pro 1.03.01.04 Test Criteria： 1. The BIOS Setting IDE mode for DUT. 2. DUT must install OS and all drivers forIDE mode without any problems or error occurs. 1.03.01.05 Test Procedure： 1. Plug SATA HDD and DVD-ROM into DUT. 2. Setting IDE mode of SATA Mode on BIOS. 3. To install OS and drivers. 4. Install PassMark BurnIn Pro program and run 30min. After finished testing, the result will show on screen. 5. Enter S1 mode, the system should be resume from S1 mode. This can work properly, and repeat 3times. 6. Enter S3 mode, the system should be resume from S3 mode. This can work properly, and repeat 3times. 7. Enter S4 mode, the system should be resume from S4 mode. This can work properly, and repeat 3times. 8. Enter Start-> shutdown on OS, then press power button turn on and boot into OS of DUT. This can work properly, and repeat 3times. 9. Enter Start-> restart on OS, then boot into OS of DUT. This can work properly, and repeat 3times. 1.03.01.06 Test Data： Test Item Description Result Remark Win7 Ultimate SP1_X86 Installation Test. PASS Win8.1 Pro_X86 Installation Test. PASS SATA IDE Mode ACPI S4 Mode PASS OS shut dowm PASS Warm Boot Test. PASS
1.03 SATA AHCI Mode Function Test
Page 15 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
1.03.01.07 Test Purpose： The purpose of this test is to ensure the functional of the SATA AHCI Mode. 1.03.01.08 Test Standard： Please refer to the Project Hardware and BIOS specification 1.03.01.09 Test Tools： 4. SATA HDD 5. SATA DVD-ROM 6. PassMark Burn In test Pro 7. Intel F6 Install Floppy Driver or AHCI driver on USB flash disk. 1.03.01.10 Test Criteria： 3. The BIOS Setting AHCI mode for DUT. 4. DUT must install OS and all drivers for AHCI mode without any problems or error occurs. 1.03.01.11 Test Procedure： 10. Plug SATA HDD and DVD-ROM into DUT. 11. Setting AHCI mode of SATA Mode on BIOS. 12. To install OS and drivers, during install process, need to upload AHCI driver from Floppy or USB flash disk. 13. Install PassMark BurnIn Pro program and run 30min. After finished testing, the result will show on screen. 14. Enter S1 mode, the system should be resume from S1 mode. This can work properly, and repeat 3times. 15. Enter S3 mode, the system should be resume from S3 mode. This can work properly, and repeat 3times. 16. Enter S4 mode, the system should be resume from S4 mode. This can work properly, and repeat 3times. 17. Enter Start-> shutdown on OS, then press power button turn on and boot into OS of DUT. This can work properly, and repeat 3times. 18. Enter Start-> restart on OS, then boot into OS of DUT. This can work properly, and repeat 3times. 19. Setting Enabled Hot Plug SATA Port on BIOS. 20. The DUT SATA should be Hot Plug and work properly, and repeat 3times. 1.03.01.12 Test Data： Test Item Description Result Remark Win7 Ultimate SP1_X64 Installation Test. PASS SATA AHCI Mode Win8.1 Pro_X64 Installation Test. PASS ACPI S4 Mode PASS
Page 16 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
OS shut dowm PASS Warm Boot Test. PASS Hot Plug PASS
1.04 SATA RAID Mode Function Test 1.04.01.01 Test Purpose： The purpose of this test is to ensure the functional of the SATA RAID Mode. 1.04.01.02 Test Standard： Please refer to the Project Hardware and BIOS specification 1.04.01.03 Test Tools： 1. SATA HDD 2. SATA DVD-ROM 3. PassMark Burn In test Pro 4. Intel F6 Install Floppy Driver or RAID driver on USB flash disk. 1.04.01.04 Test Criteria： 1. The BIOS Setting RAID mode for DUT on BIOS. 2. DUT must install OS and all drivers for SATA mode without any problems or error occurs. 1.04.01.05 Test Procedure： 1. Setting RAID mode of SATA Mode on BIOS. 2. During boot, Press
Page 17 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 2：Software Compatibility Test
2.01 OS and Driver Install Test 2.01.01.01 Test Purpose： The purpose of this test is to ensure the OS compatibility of the DUT. 2.01.01.02 Test Standard： Please refer to the Project Hardware and BIOS specification 2.01.01.03 Test Tools： 1. Microsoft OS installation DVD depends on X86/X64. 2.01.01.04 Test Criteria： 1. The OS X86/X64 installation process must complete without any error occurs. 2. The Server OS X86/X64 installation process must complete without any error occurs. 3. Device Management can not have any exclamation point and question mark. 2.01.01.05 Test Procedure： 1. Plug OS DVD or Server OS into DVD-ROM, and start install follow installation process. 2. After finish OS install, install all drivers for the DUT. 3. Make sure drivers of the DUT can install, and device management can not have any unknown device. 2.01.01.06 Test Data： Test Item Description Result Remake OS Installation – English. PASS Win7 Ultimate SP1 x86 Driver Installation. PASS Device Management Check. PASS OS Installation – English. PASS Win7 Ultimate SP1 x64 Driver Installation. PASS Device Management Check. PASS OS Installation – English. PASS Win8.1 Pro x86 Driver Installation. PASS Device Management Check. PASS OS Installation – English. PASS Win8.1 Pro x64 Driver Installation. PASS Device Management Check. PASS Win Server_2008 R2 OS Installation – English. PASS
Page 18 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Test Item Description Result Remake SP1 Enterprise_x64 Driver Installation. PASS Device Management Check. PASS OS Installation – English. PASS Win Server 2012 Driver Installation. PASS Standard_x64 Device Management Check. PASS
Page 19 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 3：Hardware Compatibility Test 3.01 CPU Board Compatibility Test 3.01.01.01 Test Purpose： The purpose of this test is to validate and ensure the CPU Board compatibility of the DUT. 3.01.01.02 Test Standard： Please refer to the Project Hardware specification and BIOS specification. 3.01.01.03 Test Tools： 1. Different Chipsets of CPU Board 3.01.01.04 Test Criteria： 1. With a different CPU board connected. The DUT must PASS without any error occurs. 2. BIOS must detect current information 3. Device Management can not have any exclamation point and question mark. 3.01.01.05 Test Procedure： 1. Connect to CPU board and power on. 2. The system should be detected HDD, then install OS and drivers for this. 3. Confirm the all kinds of CPU board should work properly. 3.01.01.06 Test Data：
Test Item Description Result Remark CPU board BIOS version PCB Version OS install
MIO-5271 5271X018 A101-2 Win7/Win8.1/2012 PASS
MIO-5290 5290X015 A101-2 Win7/Win8.1 PASS
AIMB-581 A581X057 A101-3 Win7/Win8.1 PASS
PCE-5127 5127X030 A101-3 Win7/Win8.1/ Server2008R2 PASS
PCE-7128 7128X006 A101-3 Win7/Win8.1/Server2008R2/2012 PASS
Page 20 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 4：System Reliability Test 4.01 Power On/Off Test 4.01.01.01 Test Purpose： The purpose of this test is to examine and validate the stability of the Power On/Off and AT mode under Widows OS. 4.01.01.02 Test Standard： Please refer to the Project Hardware specification and BIOS specification 4.01.01.03 Test Tools： 1. Power on/off test equipment. 2. Power on/off Program 4.01.01.04 Test Criteria： 1. The test msut PASS the Power on / off circling test >= 100 times, booting rate＝100% 2. The DUT must maintain a stable condition without any system crash, hang, blue screen or any problems. 3. The system must have no any error w/ Program. 4.01.01.05 Test Procedure： 1. Connect Power on/off test equipment to DUT for Power on/off test 2. Make sure PSON1 or HW Jumper set as ATX Mode. 3. Make sure BIOS item: After AC power Failure MUST set as "Always Off". 4. Install and execute Power on/off Program, and setting Timer ：hr/min/sec on DUT. 5. Setup testing time, and change to zero of run number on Power on/off test equipment. 6. Start power on/off test and pass over100 times. 7. Make sure PSON1 or HW Jumper set as AT Mode 8. Repeat 4~5 and start power on/off test for AT mode and pass over 100 times. 4.01.01.06 Test Data： Test Item Description Result Remark 1. 1. BIOS item: After AC power Failure set as "Always Off" Power On/Off test 2. 2. H/W jumper set as ATX mode PASS (ATX mode) 3. 3. Test at room temperature for 1000 duration cycles 3. Booting rate =100% 1. BIOS item: After AC Power Failure set as "Always Off". Power On/Off test 2. H/W jumper set as AT mode PASS (AT mode) 3. Test at room temperature for 1000 duration cycles 4. Booting rate =100%
Page 21 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
4.02 Warm Boot Stress Test 4.02.01.01 Test Purpose： The purpose of this test is to analyze and validate the functional、performance capabilities、quality and stability of DUT warm boot capability. 4.02.01.02 Test Standard： Please refer to the Project Hardware specification and BIOS specification 4.02.01.03 Test Tools： 1. PassMark Rebooter 4.02.01.04 Test Criteria： 1. The test msut PASS the Reboot circling test >= 100 times, booting rate＝100% 2. The DUT must maintain a stable condition without any system crash, hang, blue screen or any problems. 3. The system must have no any error w/ Program. 4.02.01.05 Test Procedure： 1. Install PassMark Rebooter program. 2. Executing program, and setting (a) Maxiimum reboots 100 cycles. (b) Delay Time Out setting before each reboot: 20~25 sec. (c) Enabled Auto load Rebooter at startup. 3. Then start test Cycle. 4.02.01.06 Test Data： Test Item Description Result Remark 1.Run PassMark Rebooter V1.3 Build1004 Windows 7 Ultimate SP1 2. Must PASS for 100 duration cycles. PASS X64 3.Time Out Before reboot:10-25secs 4. Booting rate =100%
4.03 ACPI Cycling Burn-in Test 4.03.01.01 Test Purpose： The purpose of this test is to examine and validate the quality and stability of the DUT ACPI capability. 4.03.01.02 Test Standard： Please refer to the Project Hardware specification and BIOS specification 4.03.01.03 Test Tools： 1. PassMark Sleeper V2.3 Build1009 4.03.01.04 Test Criteria：
Page 22 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
1. The ACPI function test msut PASS run 100 times 2. The DUT must maintain a stable condition without any system crash, hang, blue screen or any other problems. 4.03.01.05 Test Procedure： 1. Install PassMark Sleeper on the DUT. 2. Setup ACPI support mode. 3. Press Configuration-> Cycles Settings-> Cycle forever, then press ok. 4. Press Sleeper Now and start test 100 times. 4.03.01.06 Test Data： Test Item Description Result Remark 1. Run PassMark Sleeper V2.3 build 1009. Windows 7 Ultimate 2. Select "all supported states". (S4) PASS SP1 X64 3. Run for 100 times. The DUT MUST maintain a stable condition after the test has been completed.
4.04 Full System, I/O Integrated Stress Test 4.04.01.01 Test Purpose： The purpose of this test is to examine and validate the quality and stability all IO of the DUT. 4.04.01.02 Test Standard： Please refer to the Project Hardware specification and BIOS specification 4.04.01.03 Test Tools： 1. PassMark BurnIn Pro 4.04.01.04 Test Criteria： 1. The Full loading test msut PASS run over 12hours 2. The DUT must maintain a stable condition without any system crash, hang, blue screen, restart or any other problems. 3. The system must have no any error w/ PassMark BurnIn Pro Program. 4.04.01.05 Test Procedure： 1. Insert tool into all of IO port on DUT. 2. Install PassMark BurnIn Pro program. 3. Executing BurnIn test, and setting : (a) Select tests toperform and their duty cycle: Setp Auto Stop “720” Minutes, select need to test items (b) Set test preferences: setup need to setting items. (c) All setting finish, press “Start selected tests” for test. 4. The DUT run program over 12hours. 4.04.01.06 Test Data： Page 23 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
I/O Integrated Stress Test: Windows 7 Ultimate SP1 X64 Test Item Description Result Remark CPU 100% Loading PASS RAM 100% Loading PASS VIDEO 100% Loading PASS 2D Graphics 100% Loading PASS 3D Graphics 100% Loading PASS SATA HDD WD 40PURX -64GVNY0File system: SATA1 PASS NTFS
Page 24 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
Chapter 5：System Performance Test 5.01 HDD Performance Test 5.01.01.01 Test Purpose： The purpose of this test is to ensure the HDD performance of the DUT. 5.01.01.02 Test Standard： Please refer to the Project Hardware specification and BIOS specification. 5.01.01.03 Test Tools： 1. HD Tach 2. HD Tune Pro 3. CrystalDiskMark 4. AS SSD Benchmark 5. ATTO Disk Benchmark 5.01.01.04 Test Criteria： 1. Executing the BenchmarkTest test item of HD Tach 2. Executing the Benchmark\Read Test of HD Tune Pro. 3. Executing the BenchmarkTest default item of CrystalDiskMark 4. Executing the BenchmarkTest default item of AS AUTO Disk Benchmark 5.01.01.05 Test Procedure： 1. Install HD Tach program. 2. Executing program, then setting “Select Storage Device” and Long bench” (a) Select Storage Device (b) Long bench(32mb zones) (c) Press Run Test. 1. Install and execute HD Tach, setting “Select Storage Device” and Long bench”: (a) Select Storage Device (b) Long bench(32mb zones) 2. Install and execute HD Tune Pro, setting “need to test HDD” and press “Start” for test. 3. Install and execute CrystalDiskMark, setting “need to test HDD” and press “All” start test. 4. Install and execute ATTO Disk Benchmark, setting Drive “need to test HDD” and press “Start” for test. 5. Record all of test results. 5.01.01.06 Test Data：
HDD Performance (OS:) Test Item HD Tach 3.0.4.0 MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark Page 25 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
HDD Performance (OS:) Test Item HD Tach 3.0.4.0 MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark Long bench(32mb zones)-Random access 17.3 17.8 17.3 16.9 17.1 /(smaller is better) Long bench(32mb HDD zones)-CPU utilization / 6 6 0 2 8 (%,+/-2%) (smaller is better) Long bench(32mb 143.3 143.8 143.8 138.7 138.4 zones)-Average read Long bench(32mb 368.8 290.8 332.7 335.3 421 zones)-Burst Speed
HDD Performance (OS:) Test Item HD Tune Pro 5.5 MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark Burst Speed / (MB/s) 323.7 274.5 284.6 299.3 300.5 Transfer Rate - Min. (MB/s) 1.7 66.8 67.8 64.9 3.8 Transfer Rate - Max. (MB/s) 156.8 158.1 156.8 152.6 152.6 HDD Transfer Rate - Average. 113 116.6 116.8 112.1 108.6 (MB/s) Access Time (ms) 22.7 23.3 22.2 21.1 22.4 CPU Utilization (%) 7.1 3.9 1.5 2.2 7.2
HDD Performance (OS:) Comment Test Item Software MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark / (unit) Seq 154 125.5 147.7 138.4 151.0
Read 512K 39.69 30.87 28.6 31.15 40.00 (MB/s) 4K 0.5 0.370 0.291 0.342 0.479 Crystal HDD 4K QD32 1.389 1.202 1.241 1.051 1.357 DiskM Seq 149.6 125.5 144.1 137.0 147.7 ark Write 512K 80.92 73.33 77.89 74.03 89.60 (MB/s) 4K 1.245 1.274 1.287 1.259 1.510 4K QD32 1.222 1.346 1.293 1.264 1.491
Page 26 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.
HDD Performance (OS:) Test Item Software MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark
HDD ATTO Disk Read (MB/s) 159.106 127.875 146.485 151.872 160.496 Benchmark Write (MB/s) 156.410 125.427 143.933 150.594 156.659
Page 27 of 27
Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.