DOCSLIB.ORG

MDS) in All Specialty of Dentistry

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
MDS) in All Specialty of Dentistry SUMANDEEP VIDYAPEETH (Declared as Deemed to be University Under Section 3 of UGC Act, 1956) Village: Piparia, Taluka: Waghodia, Dist: Vadodara, State - GUJARAT. Pin - 391760 Phone: 02668-245262 / 64 / 66, Telefax: 02668-245292 E-mail: [email protected] Website: www.sumandeepuniversity.co.in REVISED REGULATIONS AND CURRICULUM FOR MASTER OF DENTAL SURGERY COURSE 1 Our Vision: SUMANDEEP VIDYAPEETH should be a world class centre of excellence for learning and innovation, driven by social sensitivity and state-of-the-art technology. The University is amongst the top rated Educational Institute offering contemporary education, high quality research, and training and consultancy services in Health sciences to suit the ever changing needs of society. Our Philosophy: • To train the students through Evidence Based Education System • To encourage Research in all the disciplines in health sciences • To set the Benchmark in Educational Standards, Policies and Practice • To function with spirit of humanity, liberty, integrity, responsibility and togetherness • To encourage new ideas and inculcate spirit of Entrepreneurship • To create and maintain National as well as Global identity • To create a rewarding sense of belonging for mutual growth • To develop a sense of partnership amongst all • To strive hard towards creating human centered development and building knowledge-centered society and nation Our Strength: • First Largest and Recognized Deemed Health University of Gujarat State. 2 • First University in India to introduce Evidence Based Education System in Dental Curriculum. • First deemed university of Gujarat State to start Dental Postgraduate courses (MDS) in all specialty of Dentistry. • Largest Dental Hospital of Gujarat state having 400 hi-tech dental chairs. 3 SECTION CONTENT PG NO. SECTION I Master of Dental Surgery 5 Rules and Regulations SECTION II Goals and objectives of MDS course 27 SECTION III Teaching and learning activities 31 SECTION IV M. D.S Course Syllabus: Branch I – Prosthodontics and Crown & Bridge 37 Branch II – Periodontology 84 Branch III – Oral & Maxillofacial Surgery 109 Branch IV – Conservative Dentistry and 146 Endodontics Branch V – Orthodontics & Dentofacial 173 Orthopedics Branch VI – Oral and Maxillofacial 211 Pathology and Oral Microbiology Branch VII – Public Health Dentistry 234 Branch VIII – Pediatric Dentistry 254 Branch IX – Oral Medicine & Radiology 278 SECTION V ETHICS IN DENTISTRY 214 4 MASTER OF DENTAL SURGERY COURSE RULES & REGULATIONS 1. SHORT TITLE AND COMMENCEMENT: 1.1 These Regulations shall be called “THE REGULATIONS FOR THE MASTER OF DENTAL SURGERY PROGRAMS OF THE SUMANDEEP VIDYAPEETH, PIPARIAVADODARA”. 1.2 The Regulations and the Syllabus are as prescribed in these Regulations and are subject to modifications by the Academic Council of Sumandeep Vidyapeeth from time to time. 2. ELIGIBILITY: To be Eligible for Admission for the Degree of Master of Dental Surgery, the Candidate shall – 2.1 Hold a Degree of Bachelor of Dental Surgery (B.D.S.) of Sumandeep Vidyapeeth or of any other University duly recognized by the Dental Council of India. 2.2 Be registered with the State Dental Council and must have obtained provisional or permanent registration. 2.3 Have undergone compulsory rotatory internship of a year in an approved/recognised dental college. 2.4 Qualify in Merit the NEET Qualifying examination for the said academic year and be granted admission by the common counselling procedure. 2.5 In the case of a foreign national who has qualified the said NEET examination, the candidate shall obtain on payment of the prescribed fee for registration to the Dental Council of India, a temporary registration for the duration of the post-graduate training restricted to the dental college/institution to which he or she is admitted for the time being exclusively for postgraduate studies, provided further that temporary registration to such foreign national shall be subject to the condition that such person is duly registered as medical practitioner in his/her own country from which he/she has obtained his/her basics dental qualification and that his/her degree is recognized by the corresponding state dental council or concerned authority. 2.6 NEET eligibility percentile SELECTION OF CANDIDATE FOR POST-GRADUATE COURSES – 5 2.6.1 The candidate has to secure the following category wise minimum percentile* in NEET for admission to postgraduate courses held in a particular academic year. General 50th Percentile Person with locomotory disability of 45th Percentile lower limbs Scheduled castes, Scheduled 40th Percentile Tribes, Other Backward Classes *It can vary as declared by National Board of Examination for THAT particular year. 2.6.2 A candidate who has failed to secure the minimum percentile as prescribed in these regulations, shall not be admitted to any post-graduate courses in any academic year. 6 2.6.3 Minimum 5% seats of the annual sanctioned intake capacity shall be filled up by candidates with locomotory disability of lower limbs between 50% to 70%: A. Provided that in case any seat in this quota remains unfilled on account of unavailability of candidates with locomotory disability of lower limbs between 50% to 70% then any such unfilled seat shall be filled up by persons with locomotory disability of lower limbs between 40% to 50% – before they are included in the annual sanctioned seats for general category candidates: B. Provided further that this entire exercise shall be completed by each dental college/institution as per the statutory time schedule for admissions. 3. AGE LIMIT: There is No Upper Age Limit. 4. PHYSICAL FITNESS CERTIFICATE: 4.1 Every candidate before admission to the course shall submit to the Principal of the Institution a Certificate of Medical Fitness from an authorized Medical Officer that the Candidate is physically fit to undergo the M.D.S course and does not suffer from any contagious disease or Psychiatric problems. 4.2 Students with locomotory disability of lower limbs between 50% to 70% should produce the Disability Certificate issued by the duly constituted District Medical Board. 4.3 Disabled students should also produce FITNESS CERTIFICATE as described in 4.1. 5. ELIGIBILITY CERTIFICATE: The candidate who has passed the NEET qualifying examination conducted by the National Board of Examinations, before seeking admission to KMSDCH, shall obtain an Eligibility Certificate from the Sumandeep Vidyapeeth by remitting the prescribed fees along with the filled application form and required documents. 6. CUT OFF DATES FOR ADMISSION: The academic session shall commence from 1st of May and the cut-off date for admission, even for stray vacancies, in the Master of Dental Surgery course shall be 31st of May, every year. 7 The Candidates admitted up to 31st May, shall be registered for the MDS Course in that academic year. 7. ENROLLMENT: A candidate admitted to the Master of Dental Surgery Course (M.D.S.) in any one of the affiliated institutions of the Sumandeep Vidyapeeth, Piparia shall submit the prescribed application form for Enrollment, duly filled along with prescribed fee and filled in Declaration Form to the Registrar of this University through the Principal of the affiliated institution within 15 days from the joining to the Master of Dental Surgery course. The candidate who fails to submit the Enrollment form in stipulated time period will get an Extension of One term i.e. Six months. 8. DURATION OF THE COURSE: 8.1 The Period of certified study & training of the Master of Dental Surgery Postgraduate Degree Course shall be three complete years including period of examination. 8.2 Time period required for passing out MDS course shall be a maximum of six years from the date of admission in the said course. 8.3 No exemption shall be given from this period of study and training for any other experience gained prior to the admission to the MDS course, except PG diploma holders in the same specialty 8.4 Provided further that the duration of the post-graduate course for the post-graduate Diploma holders shall be of two years in the respective specialty. The syllabus and curriculum shall be the same as MDS Course in the concerned specialty except that they are not required (i) to undergo study and training in Basic Sciences and (ii) pass the PART – I examination of MDS Course. However, they have to submit the dissertation work, as part of the post- graduate programme. 8.5 A candidate who wishes to study in a second specialty shall have to undergo the full course of three years duration in that specialty. 9. COMMENCEMENT OF THE COURSE: Academic year for the Master of Dental Surgery course shall commence from 1st May of each year. 10. POST GRADUATE GUIDE: 8 10.1 The qualifications required to be a postgraduate teacher are as laid down by the Dental council of India. 10.2 The postgraduate teacher will be a registered post graduate teacher of Sumandeep Vidyapeeth. 10.3 A Professor who is a recognized postgraduate teacher can register maximum two post graduate students in each academic year of MDS course. 10.4 Not more than 6 active postgraduate students should be registered under each Professor who is a post graduate teacher during the 3 years MDS course. 10.5 A Reader who is a recognized postgraduate teacher can register maximum of one post graduate students in each academic year of MDS course. 10.6 Not more than 3 active postgraduate students should be registered under each Reader who is a post graduate Teacher during the 3 years MDS course. 10.7 The post graduate teacher will register the post graduate student in the same specialty in which he/she is trained. 10.8 The postgraduate teacher shall always certify the clinical/ practical work, library and main Dissertation, research project and any other activities conducted by post graduate student under them. 10.9 No postgraduate teacher shall enroll candidates for a discipline other than the subject of his/her Specialty for the post-graduate programme and no teacher shall be recognized as Postgraduate teacher for more than one specialty.
Load more

Recommended publications
  • Review of Plastic Surgery Biomaterials and Current Progress in Their 3D Manufacturing Technology
    materials Review Review of Plastic Surgery Biomaterials and Current Progress in Their 3D Manufacturing Technology 1,2, 3, 4 5 5 4 Wei Peng y, Zhiyu Peng y , Pei Tang , Huan Sun , Haoyuan Lei , Zhengyong Li , Didi Hui 6 , Colin Du 6, Changchun Zhou 5 and Yongwei Wang 1,2,* 1 Department of Palliative Care, West China School of Public Health and West China Fourth Hospital, Sichuan University, Chengdu 610041, China; [email protected] 2 Occupational Health Emergency Key Laboratory of West China Fourth Hospital, Sichuan University, Chengdu 610041, China 3 Department of Thoracic Surgery, West China School of Medicine, West China Hospital, Sichuan University, Chengdu 610041, China; [email protected] 4 Department of Burn and Plastic Surgery, West China School of Medicine, West China Hospital, Sichuan University, Chengdu 610041, China; [email protected] (P.T.); [email protected] (Z.L.) 5 National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China; [email protected] (H.S.); [email protected] (H.L.); [email protected] (C.Z.) 6 Innovatus Oral Cosmetic & Surgical Institute, Norman, OK 73069, USA; [email protected] (D.H.); [email protected] (C.D.) * Correspondence: [email protected] These authors contributed equally to this paper. y Received: 18 August 2020; Accepted: 14 September 2020; Published: 16 September 2020 Abstract: Plastic surgery is a broad field, including maxillofacial surgery, skin flaps and grafts, liposuction and body contouring, breast surgery, and facial cosmetic procedures. Due to the requirements of plastic surgery for the biological safety of materials, biomaterials are widely used because of its superior biocompatibility and biodegradability.
    [Show full text]
  • Complementing Surgical with Biomedical and Engineering Methods to Evolve Lip and Nose Reconstruction
    Complementing surgical with biomedical and engineering methods to evolve lip and nose reconstruction Inauguraldissertation zur Erlangung der Würde eines Doktors der Philosophie vorgelegt der Medizinischen Fakultät der Universität Basel von Andreas Albert Müller aus Basel (Basel-Stadt), Oftringen (Aargau), Schweiz Basel, 2013 Genehmigt von der Medizinischen Fakultät auf Antrag von Prof. Dr. Dr. Dr.h.c. Hans-Florian Zeilhofer (Fakultätsverantwortlicher und Korreferent) Prof. Dr. Ivan Martin (Dissertationsleiter) Prof. em. Dr. Dr. Dieter Schumann (externer Experte) Basel, den 16. September 2013 Prof. Dr. Christoph Beglinger Dekan der Medizinischen Fakultät Contents Abstract ...................................................................................................................................... 1 1. Introduction ........................................................................................................................... 3 Shape reconstruction of central facial defects ...................................................................... 3 Current standards of microsurgical tissue transfer to the face ............................................. 4 Introducing the functional vascular anatomy to cleft lip surgery .......................................... 4 Combined cleft lip and palate repair to reduce the burden of care ...................................... 5 Umbilical cord stem cells to heal inborn bone defects .......................................................... 5 2. First study: Missing facial parts computed
    [Show full text]
  • Regulations Governing the Classification of Medical Devices (Draft)
    Regulations Governing the Classification of Medical Devices (Draft) Article 1 These Regulations are enacted pursuant to Paragraph 2, Article 3 of the Medical Devices Act (hereinafter “this Act”). Article 2 Medical devices are classified into the following categories according to their function, intended use, operating instructions, and working principle, depending on the applicable medical specialty: 1. Clinical chemistry and clinical toxicology devices 2. Hematology and pathology devices 3. Immunology and microbiology devices 4. Anesthesiology devices 5. Cardiovascular devices 6. Dental devices 7. Ear, nose, and throat devices 8. Gastroenterology and urology devices 9. General and plastic surgery devices 10. General hospital and personal use devices 11. Neurological devices 12. Obstetrical and gynecological devices 13. Ophthalmic devices 14. Orthopedic devices 15. Physical medicine devices 16. Radiology devices Article 3 Medical devices are classified into the following classes according to their risk level: 1. Class I: Low risk 2. Class II: Medium risk 3. Class III: High risk 1 Article 4 Product items of the medical device classification are specified in the Annex. In addition to rules stated in the Annex, medical devices whose function, intended use, or working principle are special may have their classification determined according to the following rules: 1. If two or more categories, classes, or product items are applicable to the same medical device, the highest class of risk level is assigned. 2. The accessory to a medical device, intended specifically by the manufacturer for use with a particular medical device, is classified the same as the particular medical device, unless otherwise specified in the Annex. 3.
    [Show full text]
  • Synergistic Collaboration 30TH ANNUAL EDUCATIONAL CONFERENCE Fort Worth, Texas, USA
    ABSTRACTS International Anaplastology Association Synergistic Collaboration 30TH ANNUAL EDUCATIONAL CONFERENCE Fort Worth, Texas, USA International Anaplastology Association | 1 WELCOME Welcome Dear Colleagues As President of the International Anaplastology Association, I am pleased to welcome you to the 30th Annual Educational Conference that will take place in Fort Worth, Texas. The theme chosen by our Conference Planning Committee for this year will be Synergistic Collaboration, which translates the importance of collaboration among professionals from all areas of expertise involved in the rehabilitation of our patients with a common goal to improve their “Quality of Life”. Many congratulations to my dear friend and Conference Chair Suzanne Verma for her wonderful and endless dedication to organize such a fantastic CONTENTS scientific program. President‘s Welcome 02 Program Chair Welcome 03 To our keynote speakers, invited speakers and colleagues, please accept my warmest regards and be very welcome to this years “IAA Family Reunion”. Conference Sponsors 04 It has been an honor and privilege to serve as President of the IAA this year. At A Glance Schedule 06 Pre-Conference Program 10 I want to thank for the tremendous support from the IAA Board of Directors and our Executive Director Rachel Brooke, who dedicated their time and Conference Day 1 16 expertise to the development of this Conference. Conference Day 2 33 This meeting will be a great opportunity not only to expand our knowledge by Post-Conference Program 48 exchanging our experiences with the most renowned and talented speakers, Poster Presentations 52 some already known by you and some new ones. Notes 54 Our “Anaplastology Family “ is with arms wide open to receive new members and attendants from various specialties involved in the rehabilitation of people suffering from facial and somato disfigurement.
    [Show full text]
  • Classification, History, and Future Prospects of Maxillofacial Prosthesis
    Hindawi International Journal of Dentistry Volume 2019, Article ID 8657619, 7 pages https://doi.org/10.1155/2019/8657619 Review Article Classification, History, and Future Prospects of Maxillofacial Prosthesis Fernanda Pereira de Caxias,1 Daniela Micheline dos Santos,1,2 Lisiane Cristina Bannwart,1 Clovis Lamartine de Moraes Melo Neto,1 and Marcelo Coelho Goiato 1,2 1Department of Dental Materials and Prosthodontics, São Paulo State University (UNESP), School of Dentistry, Araçatuba, São Paulo, Brazil 2Center for Oral Oncology, UNESP, Araçatuba, São Paulo, Brazil Correspondence should be addressed to Marcelo Coelho Goiato; [email protected] Received 12 March 2019; Revised 5 June 2019; Accepted 4 July 2019; Published 18 July 2019 Academic Editor: Carlos A. Munoz-Viveros Copyright © 2019 Fernanda Pereira de Caxias et al. -is is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. -is review presents a classification system for maxillofacial prostheses, while explaining its types. It also aims to describe their origin and development, currently available materials, and techniques, predicts the future requirements, and subsequently discusses its avenues for improvement as a restorative modality. A literature search of the PubMed/Medline database was performed. Articles that discussed the history, types, materials, fabrication techniques, clinical implications, and future ex- pectations related to maxillofacial prostheses and reconstruction were included. Fifty-nine articles were included in this review. Maxillofacial prostheses were classified as restorative or complementary with subclassifications based on the prostheses finality. -e origin of maxillofacial prostheses is unclear; however, fabrication techniques and materials have undergone several changes throughout history.
    [Show full text]
  • Augmenting Realm of 3D Printing in Restorative Dentistry and Endodontics: a Review Nikita Arun Kamat1,*, Saritha Vallabhaneni2, Prahlad Saraf2, Sandhya Khasnis2
    Review Article International Journal of Dental Materials 2020; 2(1) ISSN:2582-2209 Augmenting realm of 3D printing in restorative dentistry and endodontics: a review Nikita Arun Kamat1,*, Saritha Vallabhaneni2, Prahlad Saraf2, Sandhya Khasnis2 1Postgraduate Student, Department of Conservative Dentistry & Endodontics, PMNM Dental College, Bagalkot, Karnataka, India . 2Professor, Department of Conservative Dentistry & Endodontics, PMNM Dental College, Bagalkot, Karnataka, India . INFORMATIO N ABSTRACT The 3D printing is entrenching itself as an advancing forefront in the field of Article History dentistry. The 3D printing technology mostly works on the concept of additive manufacturing, which has its advantages over in contrast to the subtractive Received 2nd February 2020 manufacturing process. Advancement of this technology has improved diag- nostic accuracy, easy treatment delivery and reduced chair side time allowing Received revised the dentist to provide treatment effectively and with high precision. Education- 6th March 2020 al programs which utilise 3D printed models stimulate better training of dental skills in students and trainees. Thus, 3D printing enables to provide a holistic th Accepted 6 March 2020 approach to ameliorate the health and wellbeing of patients. This review arti- cle provides an overview of different methods of 3D Printing and its applica- Available online tions focusing on Restorative dentistry and Endodontics. 9th March 2020 KEYWORDS 1. Introduction Digitalization through 3D printing is a remarkable advancement in the field of 3D printing dentistry which allows precision in treating patients. It is as an emerging tech- nology with its wide variety of applications in the dental field. In the present CAD-CAM Era, this technology ensures quality and quantity in dental care, making it a Fused deposition modelling preferred modality of treatment [1].
    [Show full text]
  • 523 Part 878—General and Plastic Surgery Devices
    Food and Drug Administration, HHS Pt. 878 table. Prior to treatment, the urinary 878.3800 External aesthetic restoration pros- stone is targeted using either an inte- thesis. gral or stand-alone localization/imag- 878.3900 Inflatable extremity splint. ing system. Shock waves are typically 878.3910 Noninflatable extremity splint. 878.3925 Plastic surgery kit and accessories. generated using electrostatic spark dis- charge (spark gap), electromagneti- Subpart E—Surgical Devices cally repelled membranes, or piezo- electric crystal arrays, and focused 878.4010 Tissue adhesive. onto the stone with either a specially 878.4011 Tissue adhesive with adjunct wound designed reflector, dish, or acoustic closure device for topical approximation of skin. lens. The shock waves are created 878.4014 Nonresorbable gauze/sponge for ex- under water within the shock wave ternal use. generator, and are transferred to the 878.4015 Wound dressing with poly (diallyl patient’s body using an appropriate dimethyl ammonium chloride) acoustic interface. After the stone has (pDADMAC) additive. been fragmented by the focused shock 878.4018 Hydrophilic wound dressing. waves, the fragments pass out of the 878.4020 Occlusive wound dressing. body with the patient’s urine. 878.4022 Hydrogel wound dressing and burn dressing. (b) Classification. Class II (special 878.4025 Silicone sheeting. controls) (FDA guidance document: 878.4040 Surgical apparel. ‘‘Guidance for the Content of Pre- 878.4100 Organ bag. market Notifications (510(k)’s) for 878.4160 Surgical camera and accessories. Extracorporeal Shock Wave 878.4165 Wound autofluorescence imaging Lithotripters Indicated for the Frag- device. mentation of Kidney and Ureteral 878.4200 Introduction/drainage catheter and Calculi.’’) accessories.
    [Show full text]
  • No.DCG (I/Misc./2017 (68) Central Drugs Standard Control
    No.DCG (I/Misc./2017 (68) Central Drugs Standard Control Organisation Directorate General of Health Services Office of Drugs Controller General India FDA Bhawan, Kotla Road, New Delhi Dated: 29th June, 2017. Notice The Drugs & Cosmetics Act, 1940 is an Act to regulate import, manufacture, distribution and sale of drugs and cosmetics. It extends to the whole of India. Further, the Drugs & Cosmetics Rules, 1945 have been put in place which are updated from time to time for uniform implementation of the statutory requirements. The devices intended for internal or external use in the diagnosis, treatment, mitigation or prevention of disease or disorder in human beings or animals, as may be specified from time to time by the Central Govt. by notification in official Gazette, after consultation with the Board, fall under the definition of drug. The list of devices notified so far are appended below: S.NO. NAME OF THE DEVICE 1. Disposable Hypodermic Syringes 2. Disposable Hypodermic Needles 3. Disposable Perfusion Sets 4. In vitro Diagnostic Devices for HIV, HbsAg and HCV 5. Cardiac Stents 6. Drug Eluting Stents 7. Catheters 8. Intra Ocular Lenses 9. I.V. Cannulae 10. Bone Cements 11. Heart Valves 12. Scalp Vein Set 13. Orthopedic Implants 14. Internal Prosthetic Replacements 15. Ablation Device The Medical Devices Rules, 2017* have been notified and would come into force with effect from 1stday of January, 2018. Criteriafor Classification of medical Page 1 of 1 Annexure DRAFT LIST OF MEDICAL DEVICES AND IN VITRO DIAGNOSTICS ALONG WITH THEIR RISK CLASS A - LIST OF MEDICAL DEVICES ALONG WITH THEIR RISK CLASS S.N.
    [Show full text]
  • 487 Part 878—General and Plastic Surgery Devices
    Food and Drug Administration, HHS Pt. 878 generated using electrostatic spark dis- 878.3925 Plastic surgery kit and accessories. charge (spark gap), electromagneti- cally repelled membranes, or piezo- Subpart E—Surgical Devices electric crystal arrays, and focused 878.4010 Tissue adhesive. onto the stone with either a specially 878.4011 Tissue adhesive with adjunct wound designed reflector, dish, or acoustic closure device for topical approximation lens. The shock waves are created of skin. under water within the shock wave 878.4014 Nonresorbable gauze/sponge for ex- generator, and are transferred to the ternal use. 878.4015 Wound dressing with poly (diallyl patient’s body using an appropriate dimethyl ammonium chloride) acoustic interface. After the stone has (pDADMAC) additive. been fragmented by the focused shock 878.4018 Hydrophilic wound dressing. waves, the fragments pass out of the 878.4020 Occlusive wound dressing. body with the patient’s urine. 878.4022 Hydrogel wound dressing and burn (b) Classification. Class II (special dressing. controls) (FDA guidance document: 878.4025 Silicone sheeting. ‘‘Guidance for the Content of Pre- 878.4040 Surgical apparel. 878.4100 Organ bag. market Notifications (510(k)’s) for 878.4160 Surgical camera and accessories. Extracorporeal Shock Wave 878.4200 Introduction/drainage catheter and Lithotripters Indicated for the Frag- accessories. mentation of Kidney and Ureteral 878.4300 Implantable clip. Calculi.’’) 878.4320 Removable skin clip. 878.4340 Contact cooling system for aes- [65 FR 48612, Aug. 9, 2000] thetic use. 878.4350 Cryosurgical unit and accessories. PART 878—GENERAL AND PLASTIC 878.4360 Scalp cooling system to reduce the likelihood of chemotherapy-induced alo- SURGERY DEVICES pecia.
    [Show full text]
  • 392 Part 878—General and Plastic Surgery
    § 876.5990 21 CFR Ch. I (4–1–08 Edition) sterile infant gavage set, gastro- ‘‘Guidance for the Content of Pre- intestinal string and tubes to locate in- market Notifications (510(k)’s) for ternal bleeding, double lumen tube for Extracorporeal Shock Wave intestinal decompression or intubation, Lithotripters Indicated for the Frag- feeding tube, gastroenterostomy tube, mentation of Kidney and Ureteral Levine tube, nasogastric tube, single Calculi.’’) lumen tube with mercury weight bal- loon for intestinal intubation or de- [65 FR 48612, Aug. 9, 2000] compression, and gastro-urological ir- rigation tray (for gastrological use). PART 878—GENERAL AND PLASTIC (b) Classification. (1) Class II (special SURGERY DEVICES controls). The barium enema retention catheter and tip with or without a bag Subpart A—General Provisions that is a gastrointestinal tube and ac- Sec. cessory is exempt from the premarket 878.1 Scope. notification procedures in subpart E of 878.3 Effective dates of requirement for pre- this part subject to the limitations in market approval. § 876.9. 878.9 Limitations of exemptions from sec- (2) Class I (general controls) for the tion 510(k) of the Federal Food, Drug, dissolvable nasogastric feed tube guide and Cosmetic Act (the act). for the nasogastric tube. The class I de- vice is exempt from the premarket no- Subpart B—Diagnostic Devices tification procedures in subpart E of 878.1800 Speculum and accessories. part 807 of this chapter subject to § 876.9. Subpart C [Reserved] [49 FR 573, Jan. 5, 1984, as amended at 65 FR Subpart D—Prosthetic Devices 2317, Jan. 14, 2000; 65 FR 76932, Dec.
    [Show full text]
  • Characterisation of Implant Supported Soft Tissue Prostheses Produced with 3D Colour Printing Technology
    Characterisation of Implant Supported Soft Tissue Prostheses Produced with 3D Colour Printing Technology School of Clinical Dentistry The University of Sheffield A PhD thesis submitted by Faraedon M. M. Zardawi November 2012 i Dedication I lovingly dedicate this thesis to my wife Wasnaa, who has supported me each step of the way. To my parents, who always stood by me, gone now, but never forgotten. I will miss them always and love them forever. To my lovely daughter Farah, my sons Ahmed and Ali, their wives Marwa and Israa and my sweet grand kids Lavin, Lana and Meran; that is my lovely family. ii Acknowledgments I would like to convey my gratitude to my supervisors, Professor Julian Yates and Professor Richard van Noort for providing me with the inspiration and support during my PhD work. Their kind but rigorous oversight of this project constantly gave me the motivation to perform to my maximum ability. I was very fortunate to have been able to work with them; their detailed and constructive comments were vital to the development of this thesis. I would also like to extend my gratitude to Mr. David Wildgoose for his advice and support I am most grateful to the other members of the project team at Sheffield based Industrial Design Company, Fripp Design and Research: Mrs Sue Roberts, Tom Fripp, Neil Frewer and Steve Roberts for their time and expertise throughout this project. Very special thanks to Neil Frewer for his great help in designing the alignment process and producing the magnet boss designs for the prostheses.
    [Show full text]
  • DCGI Notice 2017-68
    No.DCG (I/Misc./2017 (68) Central Drugs Standard Control Organisation Directorate General of Health Services Office of Drugs Controller General India FDA Bhawan, Kotla Road, New Delhi Dated: 29th June, 2017. Notice The Drugs & Cosmetics Act, 1940 is an Act to regulate import, manufacture, distribution and sale of drugs and cosmetics. It extends to the whole of India. Further, the Drugs & Cosmetics Rules, 1945 have been put in place which are updated from time to time for uniform implementation of the statutory requirements. The devices intended for internal or external use in the diagnosis, treatment, mitigation or prevention of disease or disorder in human beings or animals, as may be specified from time to time by the Central Govt. by notification in official Gazette, after consultation with the Board, fall under the definition of drug. The list of devices notified so far are appended below: S.NO. NAME OF THE DEVICE 1. Disposable Hypodermic Syringes 2. Disposable Hypodermic Needles 3. Disposable Perfusion Sets 4. In vitro Diagnostic Devices for HIV, HbsAg and HCV 5. Cardiac Stents 6. Drug Eluting Stents 7. Catheters 8. Intra Ocular Lenses 9. I.V. Cannulae 10. Bone Cements 11. Heart Valves 12. Scalp Vein Set 13. Orthopedic Implants 14. Internal Prosthetic Replacements 15. Ablation Device The Medical Devices Rules, 2017* have been notified and would come into force with effect from 1stday of January, 2018. Criteriafor Classification of medical Page 1 of 1 Annexure DRAFT LIST OF MEDICAL DEVICES AND IN VITRO DIAGNOSTICS ALONG WITH THEIR RISK CLASS A - LIST OF MEDICAL DEVICES ALONG WITH THEIR RISK CLASS S.N.
    [Show full text]