SPECIFICATIONS FOR VEHICLES

Tractor Unit for 5000 USG Tank - Quantity 1 Required Specifications Supplier Specifications Supplier Comments

To be specified by the bidder using trade/model name of the 1 Model vehicle on which bid is submitted. (Can be left or right- hand drive.)

Acceptable diesel engines shall be approximately 13 liter engine with a minimum horsepower rating of 400 2 Engine horsepower programme to a governed RPM. (The governed RPM must be stated.) Fuel efficiency as specified by the manufacturer.

Eaton Fuller (max. 13-Speed). It shall also meet minimum 3 Transmission performance requirements for ON/OFF Highway use.

4 Wheels Ten (10) Wheels as specified by manufacturer.

Rear : Shall be heavy-duty tandem axle with automatic 5 Axle differential lock.

20 Tonnes (Pitching type) 5th Wheel 6 Expected Gross Comb. Weight (80,000 lbs) Loading Expected Gross (capacity 46,000 lbs)

Dual Air Brake Package with Anti-Lock Brake System with 7 Brake System Traction Control (shall include engine braking)

Shall be sufficient to meet requirements of the engine, 8 Driveline transmission and rear end ratio

Lockable 100 gal. Aluminium – RH; Lockable 100 gal. 9 Fuel Tanks Aluminium – LH; Fuel/water separator (bright finish).

295R80R22.5 Front; 295R80R22.5 Rear (two (2) spare rim 10 : and req’d) (all bright finish)

(2) Utility light swivel roof mounted (facing rear); Tinted Windows; (2) Amber roof mounted rotating beacons, mud guards, dual outside grab handles, king size mirrors (7” x 11 Cab Exterior: 16” with separate convex mirror); tyre inflation device, air horn, work lights behind the cab; shall be painted in the BWA’s colours

Heavy-duty (factory installed) air conditioner; driver/passenger interior sun visors; air suspension driver seat; 12v negative ground electrical system; (2) cup holders; heavy-duty mid-grade vinyl with cloth insert seats and seat belts; fire extinguisher; low air pressure light and buzzer; air pressure gauges; backup alarm; metric gauges; 12 Cab Interior: diagnostic interface connector; electric fuel level gauge; electric engine oil pressure gauge; tachometer (with engine over-run warning) AM/FM radio; roof/overhead console CB radio provision with electrical supply and face plate. Heavy- duty rubber floor mats; the unit shall have a headline and back panel. Manufacture shall provide a manual battery disconnect switch easily assessable from outside the cab. Tractor Unit for 5000 USG Tank - Quantity 1 Required Specifications Supplier Specifications Supplier Comments Stationary Cab mounted single vertical exhaust (bright 13 Exhaust System: finish). Shall meet at least the 2017 emission control international standards

14 Electrical As specified by manufacturer.

15 Warranty 5 years or 100,000 km One workshop manual (inclusive of mechanical and electrical systems) hard copy and one copy on CD ROM (Microsoft XP compatible). One parts manual (inclusive of mechanical and electrical systems) hard copy and one copy on CD ROM (Microsoft XP compatible). One service manual and one operator manual, hard copy and one copy on CD ROM (Microsoft XP compatible). Diagnostic equipment and accompanying software. 16 Additional On site training (at the customer’s location) for the operator shall be provided before acceptance of the vehicle. The Authority shall consider the date of the completion of the training by the instructor as the start date of the warranty period.