<<

Live Freeview TV on iPad 2, the new iPad and iPhone 4S! Just connect to your new iPad, iPad 2* or iPhone 4S, download our free app, and start watching live Freeview TV. It’s that simple!

Included in the box myTV 2GO-m Freeview DVB-T receiver USB cable (for charging myTV 2GO-m's battery) Quick installation guide

System requirements iPad 2, new iPad or iPhone 4S or newer (iPhone 4S requires iOS 5.1 or later) iTunes store account to download our free TV app myTV 2GO-m specifications DVB-T Freeview TV receiver Built-in DVB-T antenna for use within 10 miles of a DVB-T transmitter. Connects to your iPad and iPhone 4S via the 30-pin connector Built-in battery to extend the operating time of the iPad/ iPhone Dimension 32 x 35.5 x 11.8 mm (WxLxH)

* * myTV 2GO-m is not compatible with the original iPad. iPad not included. Product subject to change. Watch live Freeview TV on the new iPad, iPad 2 and Record Freeview TV programmes on your iPad 2 or iPhone 4S anywhere there is a DVB-T Freeview signal. You can iPhone 4S*! With myTV 2GO-m plugged-in to the new iPad, watch Freeview on your iPad in your home, out and about or in iPad 2 or iPhone 4S, you can record Freeview TV broadcasts on the garden. You just need a Freeview over-the-air TV signal. the iPad/iPhone internal storage. With the free built-in EPG in the No Wi-Fi or / connection is needed! TV application, you can select upcoming digital programmes directly from the guide. You can also pause live TV (Time myTV 2GO-m works exclusively on any model of the new iPad, shifting) at anytime! iPad 2 and iPhone 4S*. myTV 2GO-m is small enough to fit in your pocket yet myTV 2GO-m is simple to install. Just plug myTV 2GO-m into powerful enough to give you the freedom to watch what you the 30-pin docking connector on your iPad/iPhone, download want, where you want. our free app from the Apple and scan for Freeview TV broadcasts in your area. It's that simple! myTV 2GO-m does not require a dataplan to operate. Receive unlimited live Freeview DVB-T TV on the new iPad, myTV 2GO-m built in antenna can receive Freeview TV iPad 2 and iPhone 4S without using your data allowance. channels within approximately 10 miles of a Freeview broadcast transmitter*. * myTV 2GO-m requires a good Freeview TV signal to display TV. In weak transmission areas, you will not be able to watch TV on your iPad/iPhone. myTV 2GO-m includes the latest generation digital * In order to record TV, your iPad/iPhone must be turned on. terrestrial TV tuner for the best possible over-the-air TV reception. With the built-in Model 1390 | EAN 0785 428 01390 9 battery, myTV 2GO-m allows you to watch up to 9 hours of live TV with an iPad 2 in airplane mode.

myTV 2GO-m is easy to setup! iPad 2 1. Connect your myTV 2GO- m directly to your DVB-T iPad 2 or iPhone 4S 2. Install our TV app from the app store (no charge)

3. Follow the simple myTV 2GO-m with setup menus. Then fl exible antenna start watching TV*!

* Where you get sufficient DVB-T (Freeview) reception

Hauppauge Computer Works UK Ltd. Crown House, Home Gardens | Dartford, Kent DA1 1DZ, tel: (+44) 0203 405 1717 | tech support: www.hauppauge.co.uk/contact | e-mail: [email protected] www.hauppauge.co.uk

Trademarks: Hauppauge logo, SoftPVR, HardPVR, MediaMVP, and WinTV are trademarks of Hauppauge Computer Works, Inc. Microsoft, Windows, Windows Vista, the Windows logo and are trademarks or registered trademarks of Microsoft Corporation. Blu-ray Disc is a trademark of the Blu-ray Disc Association. PlayStation 3 is a trademark of Computer Entertainment Inc. Intel, Pentium, and Centrino are trademarks or registered trademarks of Intel Corporation. TitanTV is a trademark of Decision Corp. Dolby Digital is a trademark of Dolby Laboratories. All other trade names are the service mark, trademark, or registered trademark of their respective holders. Hauppauge reserves the right to make improvements and/or changes to the product, software, and/or specifications described in the above information at any time without notice. ©2012 Hauppauge Computer Works, Inc.