SELECT VEHICLE PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
2 Print only the pages for your vehicle using the advanced options in the Print menu.
3 Install your Maestro RR according to the guide for your vehicle.
WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners. INSTALL GUIDE Acura CSX with NAV 2009-2011 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Acura CSX with NAV 2009-2011
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Acura CSX with NAV 2009-2011
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER CENTER DASH
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 E- LOCATED AT NAVIGATION UNIT UNDER CENTER DASH
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6
7 8 9 10 11 12 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION. STEP 5 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 6 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 3
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Acura CSX with NAV 2009-2011
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 Blue (DATA) Bluetooth unit, under center dash
SWI 3 E ~ 12 pin 01 Green (DATA) Nav unit, under center dash
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Acura ILX 2013-2015 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Acura ILX 2013-2015
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Acura ILX 2013-2015
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
2 1 14 13 12 11 10 9 8 7 6 5
4 24 23 22 21 20 19 18 17 16 15 3
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 C- LOCATED AT BLUETOOTH UNIT UNDER CENTER CONSOLE
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 14
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Acura ILX 2013-2015
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 22 Pink (DATA) Behind radio
SWI 2 C ~ 32 pin 15 Blue (DATA) Bluetooth unit, under center console
SWI Feed B ~ 24 pin 11 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Acura TSX 2009-2014 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Acura TSX 2009-2014
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Acura TSX 2009-2014
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT BELOW CENTER CONSOLE
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 15
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Acura TSX 2009-2014
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 C ~ 32 pin 02 Purple (DATA) Bluetooth unit, under dash passenger side
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Accord 2008-2009 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Accord 2008-2009
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Accord 2008-2009
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER DASH PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 12
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Accord 2008-2009
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 LtBlue (DATA) Bluetooth unit, under center dash
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Accord 2010-2012 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Accord 2010-2012
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Accord 2010-2012
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER DASH PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 12
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Accord 2010-2012
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 LtBlue (DATA) Bluetooth unit, under driver side dash
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Accord 2013-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Accord 2013-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Accord 2013-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
2 1 14 13 12 11 10 9 8 7 6 5
4 24 23 22 21 20 19 18 17 16 15 3
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 C- LOCATED AT BLUETOOTH UNIT UNDER CENTER CONSOLE
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 14
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Accord 2013-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 22 Pink (DATA) Behind radio
SWI 2 C ~ 32 pin 15 Blue (DATA) Bluetooth unit, under center console
SWI Feed B ~ 24 pin 11 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Accord Crosstour 2010-2012 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Accord Crosstour 2010-2012
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Accord Crosstour 2010-2012
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER DASH PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 12
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Accord Crosstour 2010-2012
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 LtBlue (DATA) Bluetooth unit, under driver side dash
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Accord Crosstour 2013-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Accord Crosstour 2013-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Accord Crosstour 2013-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
2 1 14 13 12 11 10 9 8 7 6 5
4 24 23 22 21 20 19 18 17 16 15 3
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 C- LOCATED AT BLUETOOTH UNIT UNDER CENTER CONSOLE
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 14
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Accord Crosstour 2013-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 22 Pink (DATA) Behind radio
SWI 2 C ~ 32 pin 15 Blue (DATA) Bluetooth unit, under center console
SWI Feed B ~ 24 pin 11 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Civic with NAV 2009-2011 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Civic with NAV 2009-2011
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Civic with NAV 2009-2011
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER CENTER DASH
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 E- LOCATED AT NAVIGATION UNIT UNDER CENTER DASH
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6
7 8 9 10 11 12 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION. STEP 5 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 6 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 3
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Civic with NAV 2009-2011
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 Blue (DATA) Bluetooth unit, under center dash
SWI 3 E ~ 12 pin 01 Green (DATA) Nav unit, under center dash
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Civic with NAV 2012-2015 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Civic with NAV 2012-2015
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Civic with NAV 2012-2015
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
RED/BROWN - CAN2H CAN2H
8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9
YELLOW/BROWN - CAN2L CAN2L
STEP 3 C- LOCATED AT BLUETOOTH UNIT
SWI 2 PINK/RED - SWI CIRCUIT 2 INPUT
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 2
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Civic with NAV 2012-2015
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
Can2H B ~ 20 pin 01 Pink (DATA) Behind radio
Can2L B ~ 20 pin 09 Blue (DATA) Behind radio
SWI 2 C ~ 32 pin 15 Blue (DATA) Bluetooth unit, above glove box
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Civic without NAV 2012-2015 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Civic without NAV 2012-2015
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Civic without NAV 2012-2015
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
YELLOW/BROWN - CAN2L CAN2L
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
RED/BROWN - CAN2H CAN2H
STEP 3 C- LOCATED AT BLUETOOTH UNIT
SWI 2 PINK/RED - SWI CIRCUIT 2 INPUT
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 1
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Civic without NAV 2012-2015
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
Can2H B ~ 20 pin 13 Pink (DATA) Behind radio
Can2L B ~ 20 pin 03 Blue (DATA) Behind radio
SWI 2 C ~ 32 pin 15 Blue (DATA) Bluetooth unit, above glove box
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda CRV with NAV 2010-2012 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda CRV with NAV 2010-2012
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda CRV with NAV 2010-2012
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER CENTER DASH
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 E- LOCATED AT NAVIGATION UNIT UNDER CENTER DASH
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6
7 8 9 10 11 12 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION.
STEP 5 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 6 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 4
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda CRV with NAV 2010-2012
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 Blue (DATA) Bluetooth unit, under center dash
SWI 3 E ~ 12 pin 01 Green (DATA) Nav unit, under center dash
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda CRV with NAV 2013-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda CRV with NAV 2013-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda CRV with NAV 2013-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
RED/BROWN - CAN2H CAN2H
8 7 6 5 4 3 2 1
16 15 14 13 12 11 10 9
YELLOW/BROWN - CAN2L CAN2L
STEP 3 C- LOCATED AT BLUETOOTH UNIT
SWI 2 PINK/RED - SWI CIRCUIT 2 INPUT
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 2
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda CRV with NAV 2013-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
Can2H B ~ 20 pin 01 Pink (DATA) Behind radio
Can2L B ~ 20 pin 09 Blue (DATA) Behind radio
SWI 2 C ~ 32 pin 15 Yellow (DATA) Bluetooth unit, center dash in front of shifter
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda CRV without NAV 2012-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda CRV without NAV 2012-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda CRV without NAV 2012-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
YELLOW/BROWN - CAN2L CAN2L
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
RED/BROWN - CAN2H CAN2H
STEP 3 C- LOCATED AT BLUETOOTH UNIT
SWI 2 PINK/RED - SWI CIRCUIT 2 INPUT
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 1
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda CRV without NAV 2012-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
Can2H B ~ 20 pin 13 Pink (DATA) Behind radio
Can2L B ~ 20 pin 03 Blue (DATA) Behind radio
SWI 2 C ~ 32 pin 15 Yellow (DATA) Bluetooth unit, center dash in front of shifter
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda CRZ 2011-2015 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda CRZ 2011-2015
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda CRZ 2011-2015
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER CENTER DASH
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 E- LOCATED AT NAVIGATION UNIT UNDER CENTER DASH
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6
7 8 9 10 11 12 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION.
STEP 5 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 6 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 5
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda CRZ 2011-2015
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Pink (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 13 Green (DATA) Bluetooth unit, under center dash
SWI 3 E ~ 12 pin 06 Orange (DATA) Nav unit, under center dash
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Element 2007-2011 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Element 2007-2011
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Element 2007-2011
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 F- LOCATED AT THE RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 E- LOCATED AT NAVIGATION UNIT UNDER CENTER DASH
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6
7 8 9 10 11 12 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 11
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Element 2007-2011
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 F ~ 20 pin 03 Green/Red (DATA) At the radio
SWI 3 E ~ 12 pin 01 Green (DATA) Nav unit, under center dash
SWI Feed F ~ 20 pin 14 Brown (-) At the radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Fit 2009-2014 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Fit 2009-2014
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Fit 2009-2014
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEPSTEP 3 3 E- LOCATED AT NAVIGATION UNIT UNDER CENTER DASH
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6
7 8 9 10 11 12 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 6
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Fit 2009-2014
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 3 E ~ 12 pin 01 Green (DATA) Nav unit, under center dash
SWI Feed B ~ 24 pin 05 White (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Insight 2010-2014 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Insight 2010-2014
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Insight 2010-2014
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER DASH PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 12
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Insight 2010-2014
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 Green (DATA) Bluetooth unit, under center dash
SWI Feed B ~ 24 pin 05 White (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Odyssey 2007 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Odyssey 2007
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Odyssey 2007
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 F- LOCATED AT THE RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 G- LOCATED AT NAVIGATION UNIT UNDER DRIVER SEAT
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6
7 8 9 10 11 12 13 14
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 9
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Odyssey 2007
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 F ~ 20 pin 03 White (DATA) At the radio
SWI 3 G ~ 14 pin 10 Gray (DATA) At Nav unit, under driver seat
SWI Feed F ~ 20 pin 11 Brown (-) At the radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Odyssey 2008-2010 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Odyssey 2008-2010
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Odyssey 2008-2010
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 C- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER CENTER DASH PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 H- LOCATED BEHIND NAVIGATION UNIT
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION.
STEP 5 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 6 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 8
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Odyssey 2008-2010
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 07 White (DATA) Behind radio
SWI 2 D ~ 28 pin 02 Blue (DATA) Bluetooth unit, under center dash
SWI 3 H ~ 16 pin 12 Gray (DATA) Behind Nav unit
SWI Feed C ~ 20 pin 06 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Odyssey 2011-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Odyssey 2011-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Odyssey 2011-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
WIRES FROM 9 10 11 12 13 14 15 16 VEHICLE
BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 I- LOCATED AT HANDS FREE UNIT TO THE RIGHT OF RADIO PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH. STEP 4 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 5 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 7
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Odyssey 2011-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Black (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 I ~ 32 pin 15 Green (DATA) Hands free unit, right of radio
SWI Feed B ~ 24 pin 05 Orange (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Pilot 2009-2015 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Pilot 2009-2015
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Pilot 2009-2015
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER CENTER DASH PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 H- LOCATED BEHIND NAVIGATION UNIT
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION.
STEP 5 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 6 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 10
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Pilot 2009-2015
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Pink (DATA) Behind radio
SWI 2 D ~ 28 pin 02 White (DATA) Bluetooth unit, under center dash
SWI 3 H ~ 16 pin 12 Purple (DATA) Behind Nav unit
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4 INSTALL GUIDE Honda Ridgeline 2009-2014 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES Click here for: iDatalink Maestro RR Radio Replacement Interface Radar Integration Installation Guide iDatalink Compatible Radio Radar Integration Owner’s Guide for Kenwood and JVC Radios ELECTRONICS
PROGRAMMED FIRMWARE ADS-RR(SI)-HON01-DS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Ridgeline 2009-2014
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED hELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 2 Honda Ridgeline 2009-2014
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM BROWN/YELLOW - CANL CANL VEHICLE
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 1 11 10 9 8 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 D- LOCATED AT BLUETOOTH UNIT UNDER CENTER DASH PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 H- LOCATED BEHIND NAVIGATION UNIT
ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 CONNECT IF THE VEHICLE IS EQUIPPED WITH NAVIGATION.
STEP 5 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 6 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 10
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 3 Honda Ridgeline 2009-2014
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 16 Green/Red (DATA) Behind radio
SWI 2 D ~ 28 pin 02 Purple (DATA) Bluetooth unit, under center dash
SWI 3 H ~ 16 pin 12 Gray (DATA) Behind Nav unit
SWI Feed B ~ 24 pin 05 Brown (-) Behind radio
Automotive Data Solutions Inc. © 2018 ADS-RR(SI)-HON01-DS maestro.idatalink.com 4