DOCSLIB.ORG

228 Subpart D—Thermoplastic Resins

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
228 Subpart D—Thermoplastic Resins § 414.36 40 CFR Ch. I (7–1–09 Edition) § 414.36 Pretreatment standards for *Polyethylene—Polyvinyl Acetate Copoly- new sources (PSNS). mers Polyethylene Resin (HDPE) Except as provided in 40 CFR 403.7 Polyethylene Resin (LPDE) any new source subject to this subpart Polyethylene Resin, Scrap which introduces pollutants into a pub- Polyethylene Resin, Wax (Low M.W.) licly owned treatment works must Polyethylene Resin, Latex comply with 40 CFR part 403 and Polyethylene Resins achieve discharges in accordance with *Polyethylene Resins, Compounded § 414.111. *Polyethylene, Chlorinated *Polyimides [58 FR 36892, July 9, 1993] *Polypropylene Resins Polystyrene (Crystal) Subpart D—Thermoplastic Resins Polystyrene (Crystal) Modified *Polystyrene—Copolymers § 414.40 Applicability; description of *Polystyrene—Acrylic Latexes the thermoplastic resins sub- Polystyrene Impact Resins category. Polystyrene Latex Polystyrene, Expandable The provisions of this subpart are ap- Polystyrene, Expanded plicable to the process wastewater dis- *Polysulfone Resins charges resulting from the manufac- Polyvinyl Acetate ture of the products classified under *Polyvinyl Acetate—PVC Copolymers SIC 28213 thermoplastic resins includ- *Polyvinyl Acetate Copolymers ing those resins and resin groups listed *Polyvinyl Acetate Resins below. Product groups are indicated Polyvinyl Alcohol Resin Polyvinyl Chloride with an asterisk (*). Polyvinyl Chloride, Chlorinated *Abietic Acid—Derivatives *Polyvinyl Ether-Maleic Anhydride *ABS Resins *Polyvinyl Formal Resins *ABS-SAN Resins *Polyvinylacetate—Methacrylic Copolymers *Acrylate-Methacrylate Latexes *Polyvinylacetate Acrylic Copolymers *Acrylic Latex *Polyvinylacetate-2-Ethylhexylacrylate Co- *Acrylic Resins polymers *Cellulose Acetate Butyrates Polyvinylidene Chloride Cellulose Acetate Resin *Polyvinylidene Chloride Copolymers *Cellulose Acetates *Polyvinylidene-Vinyl Chloride Resins *Cellulose Acetates Propionates *PVC Copolymers, Acrylates (Latex) Cellulose Nitrate *PVC Copolymers, Ethylene-Vinyl Chloride *Ethylene-Methacrylic Acid Copolymers *Rosin Derivative Resins *Ethylene-Vinyl Acetate Copolymers *Rosin Modified Resins *Fatty Acid Resins *Rosin Resins *Fluorocarbon Polymers *SAN Resins Nylon 11 Resin *Silicones: Silicone Resins *Nylon 6–66 Copolymers *Silicones: Silicone Rubbers *Nylon 6—Nylon 11 Blends *Styrene Maleic Anhydride Resins Nylon 6 Resin Styrene Polymeric Residue Nylon 612 Resin *Styrene-Acrylic Copolymer Resins Nylon 66 Resin *Styrene-Acrylonitrile-Acrylates Copoly- *Nylons mers *Petroleum Hydrocarbon Resins *Styrene-Butadiene Resins *Polyvinyl Pyrrolidone—Copolymers *Styrene-Butadiene Resins (<50% Butadiene) *Poly(Alpha)Olefins *Styrene-Butadiene Resins (latex) Polyacrylic Acid *Styrene-Divinyl Benzene Resins (Ion Ex- *Polyamides change) *Polyarylamides *Styrene-Methacrylate Terpolymer Resins Polybutadiene *Styrene-Methyl Methacrylate Copolymers *Polybutenes *Styrene, Butadiene, Vinyl Toluene Polybutenyl Succinic Anhydride Terpolymers *Polycarbonates *Sulfonated Styrene-Maleic Anhydride Res- *Polyester Resins ins *Polyester Resins, Polybutylene *Unsaturated Polyester Resins Terephthalate *Vinyl Toluene Resins *Polyester Resins, Polyoxybenzoate *Vinyl Toluene-Acrylate Resins Polyethylene *Vinyl Toluene-Butadiene Resins *Polyethylene—Ethyl Acrylate Resins *Vinyl Toluene-Methacrylate Resins 228 VerDate Nov<24>2008 11:46 Aug 17, 2009 Jkt 217170 PO 00000 Frm 00238 Fmt 8010 Sfmt 8010 Y:\SGML\217170.XXX 217170 erowe on DSK5CLS3C1PROD with CFR.
Load more

Recommended publications
  • Tape-Unyte High Density Ptfe Tape
    TAPE-UNYTE® HIGH DENSITY PTFE TAPE T-TAPE-SPEC PRODUCT DESCRIPTION COLOR/CONSISTENCY TENSILE STRENGTH - LONGITUDINAL 3000 PSI max - ASTM D882 (mod) PRODUCT The tape is white in color. It shall be free of visible voids, cracks, folds, ELONGATION TAPE-UNYTE® High Density PTFE Tape contamination and has consistent physical properties. TAPE-UNYTE® has an 50% min - ASTM D882 (mod) TYPE indefinite shelf life. THICKNESS ® TAPE-UNYTE is a heavy duty, all TEMPERATURE RANGE USE purpose, non-seizing, PTFE thread sealing .0040 ± .0005 Inches - ASTM D374-42 -A compound in tape form that produces a Gases: PACKAGING leakproof seal on all types of metal and -450EF (-268EC) to 500EF (260EC) plastic threaded connections. TAPE- UNYTE® is a high density, 4 MIL PTFE Liquids: U.S. Measure: (polytetrafluoroethylene) Tape supplied on -450EF (-268EC) to 500EF (260EC) finished spools. Stock Code Size PRESSURE RANGE USE F520 ¼" x 520" (.63 cm x 13.2 m) RECOMMENDED USES T260 ½" x 260" (1.27 cm x 6.6 m) Gases: T520 ½” x 520" (1.27 cm x 13.2 m) TAPE-UNYTE® will not transfer any taste up to 10,000 PSI (1450 kPa) T1296 ½” x 1296" (1.27 cm x 32.9 m) or odor to the system being sealed. Liquids: W260 ¾" x 260" (1.9 cm x 6.6 m) Excellent for food and water systems. up to 3,000 PSI (435 kPa) W520 ¾" x 520" (1.9 cm x 13.2 m) TAPE-UNYTE® will never harden, and is an X260 1" x 260" (1.9 cm x 6.6 m) anti-galling tape making it possible to The system may be pressurized disassemble pipes and bolts easily after immediately after assembly.
    [Show full text]
  • Analysis of Trace Hydrocarbon Impurities in 1,3-Butadiene Using Optimized Rt®-Alumina BOND/MAPD PLOT Columns by Rick Morehead, Jan Pijpelink, Jaap De Zeeuw, Tom Vezza
    Petroleum & Petrochemical Applications Analysis of Trace Hydrocarbon Impurities in 1,3-Butadiene Using Optimized Rt®-Alumina BOND/MAPD PLOT Columns By Rick Morehead, Jan Pijpelink, Jaap de Zeeuw, Tom Vezza Abstract Identifying and quantifying trace impurities in 1,3-butadiene is critical in producing high quality synthetic rubber products. Stan- dard analytical methods employ alumina PLOT columns which yield good resolution for low molecular weight hydrocarbons, but suffer from irreproducibility and poor sensitivity for polar hydrocarbons. In this study, Rt®-Alumina BOND/MAPD PLOT columns were used to separate both common light polar contaminants, including methyl acetylene and propadiene, as well as 4-vinylcy- clohexene, which is a high molecular weight impurity that normally requires a second test on an alternative column. By using an extended temperature program that employs the full thermal range of the column, 4-vinylcyclohexene, as well as all of the typical low molecular weight impurities in 1,3-butadiene, can be analyzed in a single test. Introduction 1,3-butadiene is typically isolated from products of the naphtha steam cracking process. Prior to purification, 1,3-butadiene can be contaminated with significant amounts of isobutene as well as other C4 isomers. In addition to removing these C4 isomeric contaminants during purification, it is also important that 1,3-butadiene be free of propadiene and methyl acetylene, which can interfere with catalytic polymerization. Alumina PLOT columns are the most commonly used GC column for this application, but the determination of polar hydrocarbon impurities at trace levels can be quite challenging and is highly dependent on the deactiva- tion of the alumina surface.
    [Show full text]
  • Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder
    polymers Article Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder Tobias Bubmann 1, Andreas Seidel 2 and Volker Altstädt 1,3,* 1 Department of Polymer Engineering, University of Bayreuth, Universitätsstraße 30, Bayreuth 95447, Germany; [email protected] 2 Covestro Deutschland AG, Business Unit Polycarbonates, Research & Development, Development Blends, Leverkusen 51365, Germany; [email protected] 3 Bavarian Polymer Institute and Bayreuth Institute of Macromolecular Research; University of Bayreuth, Universitätsstraße 30, Bayreuth 95447, Germany * Correspondence: [email protected]; Tel.: +49-(0)-921-55-7471 Received: 6 November 2019; Accepted: 7 December 2019; Published: 12 December 2019 Abstract: The effect of different catalysts on reactive compatibilization of 50/50 polycarbonate (PC)/polymethylmethacrylate (PMMA) blends achieved via transesterification that occurs during compounding in a twin-screw extruder was investigated on a phenomenological (optical and mechanical properties), mesoscopic (phase morphology), and molecular level (PC-graft(g)-PMMA-copolymer formation and polymer molecular weight degradation). Formation of PC-(g)-PMMA-copolymer by transesterification resulting in transparent mono-phase PC/PMMA blends with obviously improved compatibility of the two polymer constituents requires use of a suitable catalyst. As a side-effect, PC-(g)-PMMA-copolymer formation by transesterification is always accompanied by a significant simultaneous decomposition of the molecular weight (Mw) of the PC. For the first time, a colorless, transparent (mono-phase) PC/PMMA 50/50 blend was achieved by a twin-screw extrusion process that can be easily transferred into industrial scale. To achieve this milestone, 0.05 wt% of a weakly acidic phosphonium salt catalyst had to be applied.
    [Show full text]
  • Table of Contents
    Table of Contents Page Page Flare & Compression - Nut Assemblies Coupling for use w/ Copper Flare Outlets Connections .................................................................. 3 74755 Series ........................................................ 16-17 74750 Series ..............................................................17 74750S Series ............................................................17 Straight Couplings 74776 Series ..............................................................17 74753 Series ................................................................ 4 74776S Series ............................................................17 74754 Series ................................................................ 5 74758 Series .............................................................6-9 74755 Series ..............................................................15 Di-Electric Unions 74756 Series ..............................................................21 74755DB Series ..........................................................16 74758DB Series ............................................................ 9 3 Part Union w/ Internal Pipe Stop 74759 Series ..............................................................10 Y-Branches 708Y Series ........................................................... 18-19 Tees 74760 Series ........................................................ 10-11 74762, 74763, & 74764 Series..................................12 U-Branches 708U Series .........................................................
    [Show full text]
  • (C4-Naphthalene) Environmental Hazard Summary
    ENVIRONMENTAL CONTAMINANTS ENCYCLOPEDIA C4-NAPHTHALENE ENTRY Note: This entry is for C4 Naphthalenes only. For naphthalene(s) in general, see Naphthalene entry. July 1, 1997 COMPILERS/EDITORS: ROY J. IRWIN, NATIONAL PARK SERVICE WITH ASSISTANCE FROM COLORADO STATE UNIVERSITY STUDENT ASSISTANT CONTAMINANTS SPECIALISTS: MARK VAN MOUWERIK LYNETTE STEVENS MARION DUBLER SEESE WENDY BASHAM NATIONAL PARK SERVICE WATER RESOURCES DIVISIONS, WATER OPERATIONS BRANCH 1201 Oakridge Drive, Suite 250 FORT COLLINS, COLORADO 80525 WARNING/DISCLAIMERS: Where specific products, books, or laboratories are mentioned, no official U.S. government endorsement is intended or implied. Digital format users: No software was independently developed for this project. Technical questions related to software should be directed to the manufacturer of whatever software is being used to read the files. Adobe Acrobat PDF files are supplied to allow use of this product with a wide variety of software, hardware, and operating systems (DOS, Windows, MAC, and UNIX). This document was put together by human beings, mostly by compiling or summarizing what other human beings have written. Therefore, it most likely contains some mistakes and/or potential misinterpretations and should be used primarily as a way to search quickly for basic information and information sources. It should not be viewed as an exhaustive, "last-word" source for critical applications (such as those requiring legally defensible information). For critical applications (such as litigation applications), it is best to use this document to find sources, and then to obtain the original documents and/or talk to the authors before depending too heavily on a particular piece of information. Like a library or many large databases (such as EPA's national STORET water quality database), this document contains information of variable quality from very diverse sources.
    [Show full text]
  • BUTADIENE AS a CHEMICAL RAW MATERIAL (September 1998)
    Abstract Process Economics Program Report 35D BUTADIENE AS A CHEMICAL RAW MATERIAL (September 1998) The dominant technology for producing butadiene (BD) is the cracking of naphtha to pro- duce ethylene. BD is obtained as a coproduct. As the growth of ethylene production outpaced the growth of BD demand, an oversupply of BD has been created. This situation provides the incen- tive for developing technologies with BD as the starting material. The objective of this report is to evaluate the economics of BD-based routes and to compare the economics with those of cur- rently commercial technologies. In addition, this report addresses commercial aspects of the butadiene industry such as supply/demand, BD surplus, price projections, pricing history, and BD value in nonchemical applications. We present process economics for two technologies: • Cyclodimerization of BD leading to ethylbenzene (DSM-Chiyoda) • Hydrocyanation of BD leading to caprolactam (BASF). Furthermore, we present updated economics for technologies evaluated earlier by PEP: • Cyclodimerization of BD leading to styrene (Dow) • Carboalkoxylation of BD leading to caprolactam and to adipic acid • Hydrocyanation of BD leading to hexamethylenediamine. We also present a comparison of the DSM-Chiyoda and Dow technologies for producing sty- rene. The Dow technology produces styrene directly and is limited in terms of capacity by the BD available from a world-scale naphtha cracker. The 250 million lb/yr (113,000 t/yr) capacity se- lected for the Dow technology requires the BD output of two world-scale naphtha crackers. The DSM-Chiyoda technology produces ethylbenzene. In our evaluations, we assumed a scheme whereby ethylbenzene from a 266 million lb/yr (121,000 t/yr) DSM-Chiyoda unit is combined with 798 million lb/yr (362,000 t/yr) of ethylbenzene produced by conventional alkylation of benzene with ethylene.
    [Show full text]
  • Tribology of Polymer Blends PBT + PTFE
    materials Article Tribology of Polymer Blends PBT + PTFE Constantin Georgescu 1,* , Lorena Deleanu 1,*, Larisa Chiper Titire 1 and Alina Cantaragiu Ceoromila 2 1 Department of Mechanical Engineering, Faculty of Engineering, “Dunarea de Jos” University of Galati, 800008 Galati, Romania; [email protected] 2 Department of Applied Sciences, Cross-Border Faculty, “Dunarea de Jos” University of Galati, 800008 Galati, Romania; [email protected] * Correspondence: [email protected] (C.G.); [email protected] (L.D.); Tel.: +40-743-105-835 (L.D.) Abstract: This paper presents results on tribological characteristics for polymer blends made of polybutylene terephthalate (PBT) and polytetrafluoroethylene (PTFE). This blend is relatively new in research as PBT has restricted processability because of its processing temperature near the degradation one. Tests were done block-on-ring tribotester, in dry regime, the variables being the PTFE concentration (0%, 5%, 10% and 15% wt) and the sliding regime parameters (load: 1, 2.5 and 5 N, the sliding speed: 0.25, 0.5 and 0.75 m/s, and the sliding distance: 2500, 5000 and 7500 m). Results are encouraging as PBT as neat polymer has very good tribological characteristics in terms of friction coefficient and wear rate. SEM investigation reveals a quite uniform dispersion of PTFE drops in the PBT matrix. Either considered a composite or a blend, the mixture PBT + 15% PTFE exhibits a very good tribological behavior, the resulting material gathering both stable and low friction coefficient and a linear wear rate lower than each component when tested under the same conditions. Keywords: polybutylene terephthalate (PBT); polytetrafluoroethylene (PTFE); blend PBT + PTFE; block-on-ring test; linear wear rate; friction coefficient Citation: Georgescu, C.; Deleanu, L.; Chiper Titire, L.; Ceoromila, A.C.
    [Show full text]
  • Butadiene Bdi
    BUTADIENE BDI CAUTIONARY RESPONSE INFORMATION 4. FIRE HAZARDS 7. SHIPPING INFORMATION 4.1 Flash Point: 7.1 Grades of Purity: Research grade: 99.86 Common Synonyms Liquefied compressed Colorless Gasoline-like odor 105°F (est.) mole% Special purity: 99.5 mole% Rubber Biethylene gas 4.2 Flammable Limits in Air: 2.0%-11.5% grade: 99.0mole% Commercial: 98% Bivinyl 4.3 Fire Extinguishing Agents: Stop flow of 7.2 Storage Temperature: Ambient 1,3-Butadiene Divinyl Floats and boils on water. Flammable visible vapor cloud is produced. gas 7.3 Inert Atmosphere: No requirement Vinyl ethylene 4.4 Fire Extinguishing Agents Not to Be 7.4 Venting: Safety relief Used: Not pertinent 7.5 IMO Pollution Category: Currently not available 4.5 Special Hazards of Combustion Restrict access. 7.6 Ship Type: 2 Avoid contact with liquid and gas. Products: Not pertinent Wear goggles, self-contained breathing apparatus, and rubber overclothing (including gloves). 4.6 Behavior in Fire: Vapors heavier than air 7.7 Barge Hull Type: 2 Shut off ignition sources and call fire department. and may travel a considerable distance Evacuate area in case of large discharge. to a source of ignition and flashback. 8. HAZARD CLASSIFICATIONS Stay upwind and use water spray to ``knock down'' vapor. Containers may explode in a fire due to Notify local health and pollution control agencies. polymerization. 8.1 49 CFR Category: Flammable gas Protect water intakes. 4.7 Auto Ignition Temperature: 788°F 8.2 49 CFR Class: 2.1 4.8 Electrical Hazards: Class 1, Group B 8.3 49 CFR Package Group: Not listed.
    [Show full text]
  • United States Patent (19) 11 Patent Number: 5,318,854 Hamersma Et Al
    US005318854A United States Patent (19) 11 Patent Number: 5,318,854 Hamersma et al. 45) Date of Patent: Jun. 7, 1994 (54) POLYMER MIXTURE BASED ON A 3,644,574 2/1972 Jackson, Jr. et al. ............... 260/873 POLYBUTYLENE TEREPHTHALATE 3,657,389 4/1972 Caldwell ........... ... 525/176 ESTER AND A S-MA COPOLYMER AND 3,728,212 4/1973 Caldwell ... ... 525/176 4,080,354 3/1978 Kramer ..... ... 260/40R FILMS MADE THEREOF 4,126,602 11/1978 Sakee .................... ... 260/40R 75) Inventors: Wilhelmus J. L. A. Hamersma, 4,346,195 8/1982 Hornbaker et al. ................. 52.5/176 Bergen op Zoom, Netherlands; 4,386,186 5/1983 Maresca et al. ... 525/68 4,429,076 l/1984 Saito et al. ... 52.5/57 Roger W. Avakian, Brasschaat, 4,493,919 1/1987 Durbinet al. ... ... 524/505 Belgium 4,497,924 2/1985 Robeson et al. .. ... 524/151 73) Assignee: General Electric Co., Pittsfield, Mass. 4,526,923 7/1985 Hornbaker et al. ... 525/502 4,582,876 4/1986 Weemes ............ ... 525/64 (21) Appl. No.: 1,949 4,665,122 5/1987 Robeson et al. .. ... 524/504 (22 Filed: Jan. 4, 1993 4,717,752 1/1988 Yates, III et al. ................... 52.5/175 FOREIGN PATENT DOCUMENTS Related U.S. Application Data 1029145 4/1978 Canada . 63 Continuation of Ser. No. 671,638, Mar. 20, 1991, aban 004:2724 12/1981 European Pat. Off. doned, which is a continuation of Ser. No. 518,251, 308179 3/1989 European Pat. Off. May 7, 1990, abandoned, which is a continuation of 359565 3/1990 European Pat.
    [Show full text]
  • Fullerene Derivatives and Fullerene Superconductors H
    Digital Commons @ George Fox University Faculty Publications - Department of Biology and Department of Biology and Chemistry Chemistry 1993 Fullerene Derivatives and Fullerene Superconductors H. H. Wang J. A. Schlueter A. C. Cooper J. L. Smart [email protected] M. E. Whitten See next page for additional authors Follow this and additional works at: http://digitalcommons.georgefox.edu/bio_fac Part of the Chemistry Commons, and the Physics Commons Recommended Citation Previously published in Journal of Physics and Chemistry of Solids, 1993, 54(12), 1655-1666. This Article is brought to you for free and open access by the Department of Biology and Chemistry at Digital Commons @ George Fox University. It has been accepted for inclusion in Faculty Publications - Department of Biology and Chemistry by an authorized administrator of Digital Commons @ George Fox University. For more information, please contact [email protected]. Authors H. H. Wang, J. A. Schlueter, A. C. Cooper, J. L. Smart, M. E. Whitten, U. Geiser, K. D. Carlson, J. M. Williams, U. Welp, J. D. Dudek, and M. A. Caleca This article is available at Digital Commons @ George Fox University: http://digitalcommons.georgefox.edu/bio_fac/91 Fullerene Derivatives and Fullerene Superconductors H. H. Wang, J. A. Schlueter, A. C. Cooper, J. L. Smart, M. E. Whitten, U. Geiser, K. D. Carlson, J. M. Williams, U. Welp, J. D. Dudek and M. A. Caleca Chemistry and Materials Science Divisions Argonne National Laboratory 9700 South Cass Avenue Argonne, IL 60439 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government.
    [Show full text]
  • Community-Scale Air Toxics Ambient Monitoring Projects (CSATAM) Summary Report
    Community-Scale Air Toxics Ambient Monitoring Projects (CSATAM) Summary Report U.S. Environmental Protection Agency Office of Air Quality, Planning and Standards Air Quality Analysis Division 109 TW Alexander Drive Research Triangle Park, NC 27711 July 2009 DISCLAIMER The information presented in this document is intended as a technical resource to those conducting community-scale monitoring projects. The mention of commercial products, their source, or their use in connection with material reported herein is not to be construed as actual or implied endorsement of such products. This is document and will be updated periodically as additional final reports are delivered. The Environmental Protection Agency welcomes public input on this document at any time. Comments should be sent to Barbara Driscoll ([email protected]). FORWARD In June 2009, Eastern Research Group (ERG) under subcontract to RTI International prepared a final technical report under Contract No. EP-D-08-047, Work Assignment 1-03. The report was prepared for Barbara Driscoll of the Air Quality Assessment Division (AQAD) within the Office of Air Quality Planning and Standards (OAQPS) in Research Triangle Park, North Carolina. The report was written by Regi Ooman and was incorporated into this final report. ii TABLE OF CONTENTS Page List of Figures ................................................................................................................................... v List of Tables....................................................................................................................................
    [Show full text]
  • Type Material Name Abbreviation Plastic Acrylonitrile Butadiene
    Type Material Name Abbreviation Plastic Acrylonitrile butadiene styrene ABS Plastic Acrylonitrile butadiene styrene - High-Temp ABS - high temp Plastic Acrylonitrile butadiene styrene + Polycarbonate ABS + PC Plastic Acrylonitrile butadiene styrene + Polycarbonate + Glass Fill ABS + PC + GF Plastic Acrylonitrile styrene acrylate ASA Plastic Nylon 6-6 + 10% Glass Fill PA66 + 10% GF Plastic Nylon 6-6 + 20% Glass Fill PA66 + 20% GF Plastic Nylon 6-6 + 30% Glass Fill PA66 + 30% GF Plastic Nylon 6-6 + 50% Glass Fill PA66 + 50% GF Plastic Nylon 6-6 Polyamide PA66 Plastic Polyamide 12 PA12 Plastic Polybutylene terephthalate PBT Plastic Polybutylene terephthalate + 30% Glass Fill PBT+ 30% GF Plastic Polycaprolactam PA6 Plastic Polycaprolactam + 20% Glass Fill PA6 + 20% GF Plastic Polycaprolactam + 30% Glass Fill PA6 + 30% GF Plastic Polycaprolactam + 50% Glass Fill PA6 + 50% GF Plastic Polycarbonate PC Plastic Polycarbonate + Glass Fill PC + GF Plastic Polycarbonate + 10% Glass Fill PC + 10% GF Plastic Polycarbonate + Acrylonitrile butadiene styrene + 20% Glass Fill + 10% Stainless Steel fiber PC + ABS + 20% GF + 10% SS Fiber Plastic Polyether ether ketone PEEK Plastic Polyetherimide + 30% Glass Fill Ultem 1000 + 30% GF Plastic Polyetherimide + 40% Glass Fill (Ultem 2410) PEI + 40% GF (Ultem 2410) Plastic Polyetherimide + Ultem 1000 PEI + Ultem 1000 Plastic Polyethylene PE Plastic Polyethylene - High-Density HDPE, PEHD Plastic Polyethylene - Low-Density LDPE Plastic Polyethylene terephthalate PET Plastic Polymethyl methacrylate PMMA Plastic Polyoxymethylene
    [Show full text]