Industrial Metalworking Tooling &SolutionsSince1965

APR-JUN 2021 4 Pc. Combination Punch & Die Set Square Set Traditional Style FEATURES: • Cuts steel, brass, copper, aluminum, rubber, and plastic up to .025" thick. • Economical way to make washers, shims, and gaskets. • Clear plastic top plate marked with accurate center lines. • Cuts stainless and blue tempered shim up to .010" thick. • Base and punches are made of hardened and ground A-2 tool steel.

FEATURES: SET INCLUDES: • Hardened and tempered • (9) Punches, Sizes: 1/8", 3/16", 1/4", Part No. 1-958-315 $ 41 blade with satin chrome finish. 5/16", 3/8", 7/16", 1/2", 5/8", 3/4". Reg. Net Price $232.25 197 • Square head, center head, and protractor hardened and ground. • Used for layouts, set-ups, checking heights, depths, & setting angles, etc. Stainless Steel • Square head has a level and scriber. Protractors GRADUATIONS: 1.0mm/64ths, .05mm/32nds, 12" Blade FEATURES: • Used for drawing radial • Made of tempered steel Part No. 1-812-001 $ 14 lines, transferring angles, with satin chrome finish. Head Part No. Reg. Style 1-804- Net Price SALE! Reg. Net Price $75.18 60 and setting bevels. • Head Measures: 3-5/16 x 2". • Blade secured firmly by • Measures angles from 0-180O. Rectangle -17SS $27.09 $23.03 lock nut at any angle. • 6" arm and knurled thumb lock nut. Semi-Circle -18SS 27.09 23.03

Chrome Vanadium alloy steel socket base for Bantam System B1 long lasting durability and protection.

Boring Kit 12 Pc. 1/4" SET INCLUDES: • 1/4" Drive: T10, T15, T20, T25, T27, T30 & 3/8" Drive • 3/8" Drive: T40, T45, T47, T50, T55, T60 Torx® Bit • Storage Rack Socket Set Part No. 1-552-CBSS2 $ 73 Reg. Net Price $37.33 31

SPECIFICATIONS: FEATURES: 26" Swing Large Swing Over Bed ...... 26" • .180" minimum bore 4" Bore Engine Lathe Swing Over Cross Slide ...... 16-1/2" • .007" radius inserts Part No. 1-294-071 Swing Over Gap ...... 34" • GP22 grade inserts Reg. Net Distance Between Centers ...... 120" FEATURES: Big 4" Spindle Bore, Spindle Speeds...... (12) 36-1,600 RPM Price $273.02 • Inch dials and leadscrews. INCLUDES: Clutch Spindle Drive & Spindle Nose/ Spindle Bore ...... D1-8/4.12" • Clutch style headstock. Threads Standard ...... 32 (2 to 28) TPI • 1 CSBI-165/187-1/2-7R holder $ 72 • Safety foot brake. 4-Way Rapid Traverse • 10 CDCG-505L inserts 245 Threads Metric Pitch ...... 22 (1 to 14) MM • Jog button, 4-way rapid traverse. Tailstock Quill Travel/Taper ...... 6" / 5 MT • Centralized lube system in headstock. Main Motor ...... 10 HP, 230/460V, 3 PH • Hardened and ground gears and bedways. Shipping Weight ...... 9,180 lbs. Brighter... with Laser! Complete with NEBO The Larry™ 2 Model DP-700 12 LED + Laser Work Light KLS-26120C Digital Readout With Any Online Order $249 or More! (26" x 120") INSTALLED! Part No. 6-273-069 Part No. 6-273-069-N Valid 4/1/21 - 6/30/21. Registered Customers Only. $ 00 $ 00 One Time Use. $ 51 36,250 43,135 22 FINANCE AS LOW AS FINANCE AS LOW AS COUPON CODE: Part No. FREE0421C $773.21/mo. $920.07/mo. 1-541-6052 Value! CALL FOR DETAILS CALL FOR DETAILS

WEB: PHONE: M-F 8am - 8pm, EST FAX: FAX ORDERS 24/7

KBCTools.com 1-888-KBC5 2 2 -T 8 OOL 6 6 5 1-800-668-5615 QUICK INDEX Cutting Tools...... 2, 4-7, 36 Industrial Metalworking Tooling & Solutions Since 1965 Carbide Tooling ...... 1, 3, 8-9, 36 Fluids ...... 32 Flange Workholding Tools ...... 3, 10-13 (Collar) Nuts Deluxe Abrasives ...... 2-3, 14-15, 35 Quick-Lock Measuring & Inspection ...... 1-2, 16-21, 36 Case A “The Abrasive Hardware Specialist” Drum Kit Hardened Toolroom Accessories ...... 1-3, 22-23, 36 Black General Purpose with Shank K B Hand Tools ...... 1, 33 Oxide C Finish Shop Supplies ...... 30-31 Power / Air Tools ...... 34-35 Ref. Thread Part No. No. A B C K 1-903- ONLY! Machinery ...... 1, 24-29 FN-14 1/4-20" 5/8" 5/16" 1/2" -41601 $2.36 FN-56 5/16-18 3/4 3/8 9/16 -41602 2.50 FN-38 3/8-16 7/8 1/2 11/16 -41603 2.69 FN-76 7/16-14 1 9/16 3/4 -41604 3.12 FN-12 1/2-13 1-1/8 11/16 7/8 -41605 3.17 FN-58 5/8-11 1-3/8 13/16 1-1/16 -41606 4.07 100% SATISFACTION FN-34 3/4-10 1-5/8 1 1-1/4 -41607 5.99 FEATURES: GUARANTEED: If you are not 100% • Turn spindle clockwise to expand N rubber for quick-lock, and counter satisfied for any reason just S O Solid Carbide A I clockwise to loosen for quick-change. return the unused item(s) in TIS ACT No tools necessary its original packaging within F Hi-Roc Drill Sets • The rubber spindle is seated directly 30 days, with your receipt for a Series 200 on the drive mandrel (arbor). replacement, exchange, full credit or refund. Designed to SLEEVES KIT INCLUDES: FREE SHIPPING: drill hardened (for ea. drum size): Orders over $375.00 (50 lbs. weight limit per order) steel in the • 1/4" Shank SHIPPED FREE - via our standard shipping method. • (1) Fine (120 grit) Drums: 42-65 Rockwell • (1) Medium (80 grit) Some restrictions mayYe apply.s! We’r We’re KeepinC range. 1/2" x 1/2", e g • (1) Coarse (50 grit) 3/4" x 1", 1" x 1", Nort 1-1/2" x 1-1/2", 99% of All OrdersOPEN SETS INCLUDE:h America 2" x 1-1/2" A selection of more frequently Ship the Same Day... used,W fractionalORKING size drills, Model # QLK-15 Or you can Pick Up at your packed neatly in a plastic case. Local Branch.* Your Choice. Part No. 1-612C-055 $ 64 Reg. Net Price $46.63 * Excludes Machinery & Non-Stock Items. No. of Part No. Reg. 39 Drills Sizes 5-100- Net Price SALE! 5 1/8" to 3/8" by 16ths -20181 $300.83 $255.71 DAMAGED, LOST, OR SHORT SHIPMENTS: It doesn’t happen often, but if it does, call your local 7 1/16" to 1/4" by 32nds -20367 263.96 224.37 courier office immediately, and advise KBC so that COUNT 10 3/64" to 3/16" by 64ths -20526 306.66 260.66 we can reship and place a claim. Please keep dam- aged goods and containers until the claim is closed. onWe’re KBC! Keepin g Yes! We’re North America Linear Height Gage TRUCK SHIPMENTS: KBC is not responsible for merchandiseOPEN damaged WORKING Series 518 - High Performance or lost by motor freight carriers. If the shipment is 2D Measurement System FEATURES: damaged or short one or more packages, please • Data entry from a digimatic tool. have it noted by the truck driver on receipt and • Perpendicularity (frontal) of 5μm & freight bill. If you accept a short or damaged We’re Keepin g straightness of 4μm are guaranteed. Yeshipments! We’r frome the truck driver without proper • COUNTPneumatic full/semi-floating system notation by the driver, youNo rtdoh so America at your own risk. allowson KBC! adjustment of air-cushion height. OPEN WORKING • Basic statistical functions are provided PRICING: & RS-232C/USB data output provides KBC Tools & Machinery traditionally holds prices the option of evaluating measurement Model LH-600EG for the duration of its sales flyers. As industrial data externally w/SPC software on a PC. With Power Grip market conditions continue to change across North • 1-key operation for running a Part No. 1-808-518352 America (tariffs, raw material, and price increases), You semi-automatic can measurement. Reg. Net Price $11,238.00 KBC reserves the right toCOUNT change prices based upon SPECIFICATIONS: $ 20 inventory conditions andon supplier KBC! price increases COUNTRange ...... 0-38" (0-972mm) without notice. BUY NOW! KBC Tools & Machinery onSlider Stroke ...... 24" (600mm) 10,114 strives to be your choice for all your tooling needs. Resolution KBC!...... Switchable AccuracyYou can at 20o...... 000043" MINIMUM ORDER: FloatingCOUNT Method ...... Full/Semi-Floating Only $25.00, to cover processing costs...... on KBC! with Built-In Air Compressor We’re Keepin g Display ...... TFT LCD (Color) YeOOPS!:s! We’r e Errors do occur, so mistakesNorth are America subject OPENto correction. Sorry for WanyORKING inconvenience. You can 24/7 All Tools... COUNTYou can All The Time. You can on COUNT COUNT KBC!on KBC! We’re Keepin g on KBC! Yes! We’re FLAT RATE Contact-FreeCOUNT Service: North America SHIPPING 24/7 PICK-UP - Order Shipmenton KBC! EnsuringOPEN Safety: WORKING LOCKERS - Locker or - Scheduled Cleanings Curbside Pick-up - Social Distancing On All Check out the big You can Online Orders red lockers outside our COUNT COUNTup to 50 lbs. KBC Mississauga location. on Just order during regular Fast Service: KBC! on SomeKBC! restrictions may apply. - Quick Order Turn-Around 99% business hours and pick - Easy Online Ordering of All Orders Ship Same Day* FREE SHIPPING up your order anytime! *Excludes Machinery & Non-Stock Items ORDERS OVER $37500 You can Your tools... your time. COUNT on KBC! 2 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com You can You can COUNT COUNT on KBC! on KBC!

You can COUNT on KBC! Horizontal/Vertical Depressed Center Wheels CNC Tool TYPE 27 Tightening Fixtures 1/8" Cutting/Notching Wheels METAL FEATURES: • Multiple usage on tool holder tapers A24R: Aluminum oxide grain. R-grade bond for fast cutting and long NMTB/NST, ISO, CAT, BT and DIN. life. Works well on steel, cast iron, and welds. • Enables strong gripping Max. Part No. Reg. power of cutting tools in Size RPM 1-602- Net Price SALE! horizontal and vertical positions. 4-1/2" x 1/8"x 7/8" 13,300 -35612 $2.90 $2.47 • Light weight and compact design for 5 x 1/8 x 7/8 12,250 -35675 3.60 3.06 mounting on work table or tool cart. 7 x 1/8 x 7/8 8,600 -35634 5.30 4.51 Weight Part No. Reg Taper (lbs.) 7-189- Net Price NOW! CAT/BT 40 4.2 -740 $246.20 $209.27 CAT/BT 50 8.4 -750 362.24 307.90 1/4" Grinding Wheels METAL A24N Fast Cut Aluminum Oxide Grain: Soft N-grade bond Metric for fast stock removal. Excellent ratio of stock removal/wheel loss. Threaded Economical choice for metal and low-grade stainless. Max. Part No. Reg. Rod Size RPM 1-602- Net Price SALE! 4" x 1/4"x 5/8" 15,300 -35699 $1.95 $1.66 4-1/2 x 1/4 x 7/8 13,300 -35622 2.40 2.04 7 x 1/4 x 7/8 8,600 -35642 4.65 3.95

PLAIN OIL FINISH FEATURES: CAT40 V-Flange • 1 meter lengths. Part No. • Coupling nuts can Size Pitch 1-919- ONLY! Pull Studs or be used to make M6 1.00 -068 $3.69 Retention Knobs longer lengths. M8 1.25 -070 5.39 • High quality M10 1.50 -072 8.05 low carbon steel. M12 1.75 -074 11.94 Although retention knobs often look very similar they are not interchangeable. The use of an incorrect knob or the misuse of a knob may result in injury or property damage. It is the responsibility of the end user to verify the supplied knob is correct for the machine.

Engraver Identify Retention knob failures may and personalize occur for several reasons: your valuables! improper knob configuration, INCLUDES: misaligned machines, metal • Letter/Number Template. Use for decorative engraving. fatigue due to usage, over • Carbide Point (9924). torquing, exceeding • Engraver Tool. the machine’s capability, etc. Retention knobs should periodically FEATURES: be inspected. If there are signs of • Engraves metal, glass, excessive wear or damage, the retention knob should be replaced. wood, plastic, and ceramics. STYLE 1 STYLE 3 STYLE 6 • Holding area allows for extended use. • Soft grip adds extra comfort and control. Coolant Part No. Reg. Style Thread Angle OAL A B C E F Hole 7-081- Net Price NOW! o Model 290 SPECIFICATIONS: 3 5/8-11 45 2.250 .236 .590 1.281 .990 .390 — -C40002 $24.30 $21.87 Voltage ...... 115 AC, 60 Hz 3 5/8-11 45o 2.250 .236 .590 1.281 .990 .390 .156 -C40008 28.13 25.32 Part No. $ 67 Amps ...... 0.2 6 5/8-11 45o 2.125 .120 .590 1.250 .990 .390 — -C40020 25.58 23.02 1-829-290 37 Stroke per Minute ...... 7,200 1 5/8-11 45o 1.500 .120 .740 .625 .440 .490 .250 -C40046 21.74 19.57

RM3 Indexable Versatile milling tool that meets demanding Shoulder Mills performance and capacity requirements. INDEXABLE END MILLS - 4000 TYPE FEATURES: Cutting Cutting Shank • Excellent results in quality Dia. OAL Length Dia. Part No. Reg. Cutting Depth (ap): .315" and high machining stability even (D) (L) (I) (d) 1-244R- Net Price SALE! in the toughest cutting conditions. 1" 7.874" 1.575" 1" -017 $287.18 $244.10 • High rigidity and in clamping operations, 1 4.528 1.575 1 -014 252.14 214.32 such as shouldering, ramping, facing, 1.25 7.874 1.654 1.25 -018 305.99 260.09 slotting, and plunging, even high feed 1.25 4.922 1.654 1.25 -015 268.65 228.35 milling, the RM3 shows no signs of tool failure. 1.50 7.874 1.654 1.25 -019 346.10 294.19 Uses XNKT Style Inserts. 1.50 5.315 1.654 1.25 -016 303.88 258.30

XNKT GRADE PC5300 - Excellent for high speed machining of stainless steel and general machining of alloy steel and Carbide Inserts cast iron. Recommended cutting speed 295~787 SFM. XNKT-ML Part No. Reg. FEATURES: SALE! XNKT-MM • MM Chipbreaker for general shoulder operations. Insert Style r 1-244P- Net Price High rake angle with smooth chip flow. XNKT 080508PNER-ML* .031" -803 $13.66 $11.61 • Step design for good chip evacuation with low cutting force. XNKT 080508PNSR-MM .031 -802 13.66 11.61 DIMENSIONS: • Minor cutting edge wiper action for better surface finish. XNKT 080512PNSR-MM .047 -806 13.66 11.61 • a...... 114" XNKT 080516PNSR-MM .063 -807 13.66 11.61 • d ...... 394" • Major cutting edge has a high rake sharpened XNKT 080520PNSR-MM .079 -808 13.66 11.61 edge with two step clearance for strong • d1...... 177" * Milling Light Chipbreaker: Sharp cutting edge for • t ...... 217" clamping and rigidity improvement. hard-to-cut materials with a low cutting force.

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 3 CUTTING TOOLS PLUG STYLE SHARK LINE Ground No. of Thread Part No. Reg. DIN ANSI Blue Shark Size Flutes Limits 1-351- Net Price SALE! Spiral Pointed Taps 10-24 NC 3 H-3 -7350281 $28.52 $24.24 TAKE A BITE OUT OF THREADING. 10-32 NF 3 H-3 -7350299 28.52 24.24 For Stainless Steel 1/4-20 NC 3 H-3 -7350283 36.89 31.36 1/4-20 NC 3 H-5 -7350282 36.89 31.36 Super-B (TiAlN + WC/C) coating 1/4-28 NF 3 H-3 -7350301 36.89 31.36 with additiona edge treatment. 1/4-28 NF 3 H-5 -7350300 36.89 31.36 Manufactured from a unique powder metallurgy tool steel different from any other HSS-E-PM. 5/16-18 NC 3 H-3 -7350285 40.15 34.13 5/16-18 NC 3 H-5 -7350284 40.15 34.13 This provides an unbeatable combination of toughness and edge strength, allowing the taps to 5/16-24 NF 3 H-3 -7350303 40.15 34.13 perform at higher cutting temperatures while offering excellent performance and longer tool life. 5/16-24 NF 3 H-4 -7350302 40.15 34.13 3/8-16 NC 3 H-3 -7350287 45.26 38.47 FEATURES: 3/8-16 NC 3 H-5 -7350286 45.26 38.47 • Advanced Geometry & Chamfer - Thread geometry with optimized form generates low torque, 3/8-24 NF 3 H-3 -7350305 45.26 38.47 excellent threads at both high and low speeds, and superior surface finish. Significant reduction 3/8-24 NF 3 H-4 -7350304 45.26 38.47 in axial forces and torque compared to conventional taps ensuring problem-free threading of 7/16-14 NC 4 H-5 -7350288 58.59 49.80 blind and through holes in the selected material. 7/16-20 NF 4 H-5 -7350306 58.51 49.73 • Standard ANSI shank and square with DIN overall length, for 1/2-13 NC 4 H-3 -7350290 68.05 57.84 extra reach and compatibility with Inch Standard Tap Holding. More info. & complete listing of 1/2-13 NC 4 H-5 -7350289 68.05 57.84 • Color ring coding: Identify suitability for specific Dormer Shark Taps @ KBCTools.com 1/2-20 NF 4 H-3 -7350308 68.05 57.84 materials and enables quick and easy tool selection. 1/2-20 NF 4 H-5 -7350307 68.05 57.84

Heavy-Duty Premium Steel No. BRIGHT BLUE DIAMOND H of Part No. Reg. Part No. Reg. Spiral Fluted Taps Size Limit Flutes 407VPR- Net Price NOW! 407VPR- Net Price NOW! With Penta Relief CPM-M4 Steel 4-40 NC H-2 2 -86703 $36.64 $31.14 -86705 $38.39 $32.63 5-40 NC H-2 2 -86707 36.64 31.14 -86709 38.39 32.63 LIST NO. 407VPR RIGH HAND 6-32 NC H-3 3 -86711 29.18 24.80 -86713 30.60 26.01 8-32 NC H-3 3 -86715 29.18 24.80 -86717 30.60 26.01 CNC DESIGN - BOTTOM STYLE 10-24 NC H-3 3 -86719 29.18 24.80 -86721 30.64 26.04 10-32 NF H-3 3 -86723 29.18 24.80 -86725 30.64 26.04 R&N Premium taps are manufactured from 1/4-20 NC H-3 3 -86735 32.05 27.24 -86737 33.66 28.61 4% vanadium CPM-M4 steel. The spiral flute 1/4-20 NC H-5 3 -86739 32.05 27.24 -86741 33.66 28.61 taps are for tapping blind-holes and will draw 1/4-28 NF H-3 3 -86743 32.05 27.24 -86745 33.66 28.61 chips out of the hole. Taps have the CNC 5/16-18 NC H-3 3 -86747 35.25 29.96 -86749 37.10 31.54 neck which is smaller than conventional taps 5/16-18 NC H-5 3 -86751 35.25 29.96 -86753 37.10 31.54 to allow for better coolant flow to the teeth of 5/16-24 NF H-3 3 -86755 35.25 29.96 -86757 37.10 31.54 the tap. Taps are designed for tougher, more 3/8-16 NC H-3 3 -86759 41.27 35.08 -86761 43.37 36.86 abrasive materials up to 35 Rc. 3/8-16 NC H-5 3 -86763 41.27 35.08 -86765 43.37 36.86 3/8-24 NF H-3 3 -86767 41.27 35.08 -86769 43.37 36.86 7/16-14 NC H-3 3 -86771 65.71 55.85 -86773 68.64 58.34 BLUE DIAMOND FEATURES: 7/16-14 NC H-5 3 -86775 65.71 55.85 -86777 68.64 58.34 Specially treated electro chemical surface 7/16-20 NF H-3 3 -86779 65.71 55.85 -86781 68.64 58.34 designed to eliminate surface welding 1/2-13 NC H-3 3 -86783 78.38 66.62 -86785 81.85 69.57 1/2-13 NC H-5 3 -86787 78.38 66.62 -86789 81.85 69.57 when tapping soft stringy materials. 9/16-12 NC H-5 3 -86799 88.49 75.22 -86803 92.65 78.75 9/16-18 NF H-3 3 -86805 88.49 75.22 -86807 92.65 78.75 5/8-11 NC H-3 3 -86809 111.88 95.10 -86811 117.12 99.55 Buy In Package Quantity: 5/8-11 NC H-5 3 -86813 111.88 95.10 -86814 117.12 99.55 4-40 to 3/8-24 12 Per Pack 5/8-18 NF H-3 3 -86817 111.88 95.10 -86819 117.12 99.55 3/4-10 NC H-3 3 -86821 157.43 133.82 -86823 164.79 140.07 7/16-14 to 1/2-13 6 Per Pack 3/4-10 NC H-5 3 -86825 157.43 133.82 -86827 164.79 140.07 9/16-12 to 3/4-16 3 Per Pack 3/4-16 NF H-3 3 -86829 157.43 133.82 -86831 164.79 140.07

Thread Repair Kits Metric KITS INCLUDE: • (1) Tap Spiral Pointed • (10) Inserts • (1) Installation Tool Hand Taps • (1) Drill • (1) Tang Break LIST NO. 102M RIGHT HAND PLUG STYLE Thread Part No. Reg. HIGH SPEED STEEL Size 1-842- Net Price SALE! Pitch GROUND THREAD Dia. No. of Part No. Reg. 4-40 x 1.5D -SK20215 $51.64 $43.89 Size Limit Flutes 102M- Net Price SALE! 5-40 x 1.5D -SK20315 51.69 43.94 6-32 x 1.5D -SK20415 48.75 41.44 FEATURES: M2.5X0.45 D3 2 -62814 $18.99 $17.09 8-32 x 1.5D -SK20515 50.45 42.88 • Commonly referred M3X0.5 D3 2 -62818 15.67 14.10 10-24 x 1.5D -SK20615 46.11 39.19 to as "gun" taps. M4X0.7 D4 2 -62826 12.86 11.57 12-24 x 1.5D -SK20715 56.58 48.09 • Production tapping M5X0.8 D4 2 -62834 12.86 11.57 1/4-20 x 1.5D -SK20815 51.18 43.50 of through holes. M6X1 D5 2 -62838 13.75 12.38 5/16-18 x 1.5D -SK20915 55.66 47.31 • Flute design forces the M8X1.25 D5 2 -62850 15.36 13.82 3/8-16 x 1.5D -SK21015 66.34 56.39 evacuation of chips ahead M10X1.5 D6 3 -62854 28.23 25.41 4-48 x 1.5D -SK30215 51.69 43.94 of the cutting action. M12X1.75 D6 3 -62858 35.14 31.63 6-40 x 1.5D -SK30415 48.75 41.44 8-36 x 1.5D -SK30515 50.45 42.88 10-32 x 1.5D -SK30615 46.11 39.19 1/4-28 x 1.5D -SK30815 49.52 42.09 5 Flute NPT Taper Used for pipe fittings and 5/16-24 x 1.5D -SK30915 57.87 49.19 the sizes are determined 3/8-24 x 1.5D -SK31015 66.34 56.39 Pipe Plug Taps by the nominal pipe size. HIGH SPEED STEEL GROUND THREAD 38 Pc. C-6 LIST NO. 120G Carbide Tipped RIGHT HAND Toolbit NPT - For tapping tapered Sets pipe threads. This is the most Part No. Reg. common of all pipe tap styles. Size 120G- Net Price SALE! SET INCLUDES: The tapered thread form • 8 each AR & AL creates a pressure-tight joint 1/8-27 -18NPT-50P $31.20 $24.96 • 4 each BR & BL when used with a sealant. 1/4-18 -14NPT-50P 34.99 27.99 • 4 each C & D 3/8-18 -38NPT-50P 44.74 35.79 Dimensions Part No. Reg. • 6 each E Square Length 1-425B- Net Price NOW! Buy In Package Quantity: 1/2-14 -12NPT-50P 74.48 59.58 3/4-14 -34NPT-50P 108.00 86.40 C-6 Grade Use: 1/4" 2" -4SET $98.45 $78.76 1/8-27 to 3/8-18 6 Per Pack 1-11-1/2 -1NPT-50P 153.41 122.73 3/8 2-1/2 -6SET 104.65 83.72 1/2-14 to 1-1/4-11½ 3 Per Pack General purpose 1-1/4-11-1/2 -114NPT-50P 218.37 174.70 carbide grade for steel & steel alloys. 1/2 3-1/2 -8SET 144.95 115.96

4 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com CUTTING TOOLS Metric Chucking 5 Pc. Solid Reamers Carbide Burr Set

STRAIGHT FLUTE STRAIGHT SHANK HIGH SPEED STEEL 1/4" Head Diameter, 1/4" Shank Diameter.

SET INCLUDES: SA-1, SC-1, SD-1, SG-1, and SM-1.

Size Flute Part No. Reg. Part No. 1-338-001 $ 52 Supplied in a MM Length OAL 1-136A- Net Price SALE! Reg. Net Price $78.26 66 fitted plastic case. 1 1/2" 2-1/2" -20012 $25.63 $21.79 2 3/4 3 -20031 19.96 16.97 3 7/8 3-1/2 -20050 21.48 18.26 DIAMETER 4 1 4 -20069 25.57 21.73 TOLERANCES: 5 1-1/4 5 -20090 29.11 24.74 7 Pc. 3 Flute Solid Cap +.0002"/-.0000" 6 1-1/2 6 -20104 32.22 27.39 7 1-1/2 6 -20119 33.69 28.64 Screw Counterbore Set Designed for use 8 1-1/2 6 -20133 33.69 28.64 9 1-3/4 7 -20142 39.49 33.57 in turret lathes, 10 1-3/4 7 -20155 41.07 34.91 FEATURES: screw machines, • Designed to create a recess for socket 11 1-3/4 7 -20162 45.53 38.70 drill presses and 12 2 8 -20171 46.32 39.37 head cap screws and shoulder screws. all types of machine 13 2 8 -20179 55.36 47.06 • Also used for spot facing smaller tool equipment. 14 2 8 -20182 58.77 49.95 spots, enlarging, or cleaning holes. Ground with 15 2 8 -20185 61.46 52.24 • Solid pilot will not score a 45O chamfer. 16 2-1/4 9 -20189 83.25 70.76 or damage pilot hole. • Cutting action is chatterless.

SET INCLUDES: HIGH SPEED 14 Pc. Sizes - 6, 8, 10, 1/4", 5/16", 3/8", 1/2" STEEL Part No. 1-166-400 STRAIGHT Carbide-Tipped $ 10 SHANK Reg. Net Price $168.87 Supplied in General Purpose 135 wood stand. Hole Saw Kit

FEATURES: Uniflute Carbide • High performance triple chip tungsten Countersinks carbide tipped saws. Series 60 • Provides superior performance on materials too hard or abrasive for conventional FEATURES: For use on abrasive, • Easily resharpened. high speed steel saws. non-metallic • Features extended life • May be used on hardened steel and work hardening alloys. and non-ferrous • Rigid set-ups and good machinery maintenance are a must. when used to cut wood, materials. PVC, man-made building Supplied in materials and fiberglass. a carry case. Body Shank Part No. 5-100- Reg. Dia. OAL Dia. 60O 82O 90O Net Price SALE! KIT INCLUDES: 1/8" 1-1/2" 1/8" -60001 -60006 -60011 $21.26 $18.07 • (9) Hole Saws: 3/4", 7/8", 1-1/8", Starrett #KCT090501-N 3/16 1-1/2 3/16 -60021 -60026 -60031 26.62 22.63 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2" Part No. 1-856-69971 1/4 2 1/4 -60041 -60046 -60051 32.16 27.34 • (2) Arbors: XA1 & XA2. Reg. Net Price $284.43 3/8 2 1/4 -60061 -60066 -60071 62.55 53.17 • (1) Carbide Tipped Pilot Bit: XA014C. Not recommended 1/2 2-3/8 1/4 -60081 -60086 -60091 86.79 73.77 • (1) A15 12" Extension 3/4 3 1/2 -60101 -60106 -60111 161.42 137.21 $ 77 for use in 1 3 1/2 -60121 -60126 -60131 264.02 224.42 • (1) A7 Ejector Spring. 241 hand-held tools.

Long Series Combined 5 Pc. M-42 Cobalt 6 Flute 82o Drills & Countersinks Combined Drill & Chatterless Countersink Set Countersinks

Plain type combined drills HIGH SPEED and countersinks are used STEEL 60° INCLUDED ANGLE for producing center holes in components or workpieces HIGH SPEED STEEL which require machining Used for producing center holes in between centers. components or workpieces with the extra length allowing access to difficult-to-reach areas. RIGHT HAND Designed for general purpose 60° INCLUDED ANGLE countersinking, chamfering and Body Drill Part No. Reg. deburring. Multiflute design reduces Size Dia. Dia. OAL 1-047A- Net Price SALE! chip load and chatter even at high speeds. 1 1/8" 3/64" 3" -130 $20.35 $18.32 Body Part No. Reg. 1 1/8 3/64 4 -140 21.24 19.12 Dia. Shank OAL 1-160A- Net Price NOW! 1 1/8 3/64 5 -150 29.50 26.55 1 1/8 3/64 6 -160 38.63 34.77 3/16" 3/16" 1-1/2" -81050 $8.63 $7.34 2 3/16 5/64 4 -240 23.28 20.95 1/4 1/4 2 -81051 9.41 8.00 2 3/16 5/64 5 -250 29.82 26.84 5/16 1/4 2 -81052 10.71 9.10 2 3/16 5/64 6 -260 38.78 34.90 3/8 1/4 2 -81053 12.45 10.58 1/2 1/4 2 -81054 15.75 13.39 3 1/4 7/64 4 -340 24.52 22.07 5/8 1/2 2-3/4 -81055 22.55 19.17 3 1/4 7/64 5 -350 32.26 29.03 3 1/4 7/64 6 -360 39.14 35.23 3/4 1/2 2-3/4 -81056 30.23 25.70 7/8 1/2 2-3/4 -81057 37.98 32.28 4 5/16 1/8 4 -440 27.16 24.44 1 1/2 2-3/4 -81058 46.58 39.59 4 5/16 1/8 5 -450 34.72 31.25 1-1/4 3/4 3-3/8 -81059 67.22 57.14 4 5/16 1/8 6 -460 40.08 36.07 1-1/2 3/4 3-1/2 -81060 92.98 79.03 5 7/16 3/16 4 -540 35.70 32.13 1-3/4 1 4-1/4 -81061 125.83 106.96 5 7/16 3/16 5 -550 41.34 37.21 No. 1 - No. 5 2 1 4-3/8 -81062 150.29 127.75 5 7/16 3/16 6 -560 46.41 41.77 Part No. 1-033-100 6 1/2 7/32 5 -650 44.41 39.97 $ 86 Buy In Package Quantity: Up to 1/2" 3 Per Pack 6 1/2 7/32 6 -660 53.68 48.31 Reg. Net Price $46.89 39

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 5 CUTTING TOOLS

o 3 Flute 35 Helix Solid Carbide For Stainless Steel and Buy In Package Quantity: Center Cutting Single End Mills High Temperature Alloys. Up to 1/4" 3 Per Pack LIST NO. S335 AlTiN Coated Mill Shank Length Part No. Reg. CORNER RADIUS Dia. Dia. of Cut OAL Radius 5-303C- Net Price NOW! 1/8" 1/8" 1/4" 1-1/2" .010" -61802 $43.87 $37.29 1/8 1/8 1/2 1-1/2 .010 -61803 48.98 41.63 3/16 3/16 5/16 2 .010 -61806 47.28 40.19 3/16 3/16 9/16 2 .010 -61807 52.70 44.80 1/4 1/4 3/8 2 .020 -61810 50.69 43.09 MICROSHIELD™ AITiN - 1/4 1/4 3/4 2-1/2 .020 -61811 56.73 48.22 AluminumTitanium Nitride: FEATURES: 5/16 5/16 7/16 2 .020 -61814 64.02 54.42 • Advanced flute geometries. 5/16 5/16 13/16 2-1/2 .020 -61815 71.15 60.48 Increased thermal stability when milling • Eccentric primary relief. 3/8 3/8 1/2 2 .020 -61818 79.21 67.33 high temp alloys and Die/Mold steels with • Extra fine grain carbide. 3/8 3/8 1 2-1/2 .020 -61819 88.20 74.97 a hardness of 52 HRc and above. Excellent • Ideal for slotting. 7/16 7/16 9/16 2-1/2 .020 -61820 99.20 84.32 for HSM applications. HSS & HSCO end • Ultra high transverse 7/16 7/16 1 2-3/4 .020 -61821 110.21 93.68 rupture strength. 1/2 1/2 5/8 2-1/2 .030 -61822 121.99 103.69 mills can not be coated with AlTiN. 1/2 1/2 1-1/4 3 .030 -61823 135.63 115.29

4 Flute Extra Length Solid Carbide Center Cutting Single End Mills

TiAIN Coated Mill Shank Length Part No. Reg. Mill Shank Length Part No. Reg. LIST C430 Dia. Dia. of Cut OAL 1-3244T- Net Price SALE! Dia. Dia. of Cut OAL 1-3244T- Net Price SALE! Longer flute length 1/8" 1/8" 5/8" 2" -001 $28.83 $24.51 5/16" 5/16" 1-5/8" 4" -013 $76.57 $65.08 to allow deeper cuts. 1/8 1/8 3/4 3 -002 43.87 37.29 5/16 5/16 1-1/2 6 -014 118.73 100.92 1/8 1/8 1 3 -003 43.87 37.29 3/8 3/8 1 3 -015 80.76 68.65 3/16 3/16 1 3 -004 49.14 41.77 3/8 3/8 1 4 -016 88.66 75.36 MICROSHIELD™ TiAIN - 3/16 3/16 1-1/8 3 -005 48.67 41.37 3/8 3/8 2 4 -017 88.66 75.36 Titanium Aluminum Nitride: 3/16 3/16 1 4 -006 53.79 45.72 3/8 3/8 1-1/2 6 -018 129.12 109.75 3/8 3/8 3 6 -019 129.12 109.75 TiAlN offers a higher level of thermal stability 1/4 1/4 1 3 -007 56.58 48.09 1/4 1/4 1 4 -008 59.83 50.86 1/2 1/2 1 4 -024 130.20 110.67 above TiN & TiCN with abrasion resistance. 1/4 1/4 1-1/2 4 -009 59.83 50.86 1/2 1/2 2 4 -025 130.20 110.67 Ideal for high heat applications found in 1/4 1/4 1-1/2 6 -010 80.76 68.65 1/2 1/2 1-1/2 6 -026 187.55 159.42 milling steels, stainless steels and high temp 5/16 5/16 1 3 -011 72.08 61.27 1/2 1/2 3 6 -027 187.55 159.42 alloys with a hardness of 52 HRC and below. 5/16 5/16 1 4 -012 80.29 68.25

2 & 3 Flute Standard Single end mills are designed Length Solid Carbide for general milling operations. The spiral multi-flute design permits Single End Mills a faster and smoother cutting action.

2 FLUTE 3 FLUTE Flute Shank Flute Part No. Reg. Flute Shank Flute Part No. Reg. Dia. Dia. Length OAL 1-325- Net Price NOW! Dia. Dia. Length OAL 1-330- Net Price NOW! 1/16" 1/8" 3/16" 1-1/2" -004 $8.99 $7.19 1/16" 1/8" 3/16" 1-1/2" -004 $12.40 $9.92 3/32 1/8 3/8 1-1/2 -006 8.99 7.19 3/32 1/8 3/8 1-1/2 -006 12.40 9.92 1/8 1/8 1/2 1-1/2 -008 8.99 7.19 1/8 1/8 1/2 1-1/2 -008 12.40 9.92 5/32 3/16 9/16 2 -010 14.90 11.92 5/32 3/16 9/16 2 -010 14.90 11.92 3/16 3/16 5/8 2 -012 14.38 11.50 3/16 3/16 5/8 2 -012 14.88 11.90 7/32 1/4 5/8 2-1/2 -014 17.41 13.93 7/32 1/4 5/8 2-1/2 -014 17.41 13.93 1/4 1/4 3/4 2-1/2 -016 16.28 13.02 1/4 1/4 3/4 2-1/2 -016 18.91 15.13 9/32 5/16 7/8 2-1/2 -018 21.59 17.27 9/32 5/16 3/4 2-1/2 -018 26.35 21.08 5/16 5/16 7/8 2-1/2 -020 20.00 16.00 5/16 5/16 7/8 2-1/2 -020 24.18 19.34 3/8 3/8 7/8 2-1/2 -024 27.13 21.70 3/8 3/8 1 2-1/2 -024 29.45 23.56 7/16 7/16 1 2-1/2 -028 35.15 28.12 7/16 7/16 1 2-3/4 -028 44.95 35.96 1/2 1/2 1 3 -032 42.63 34.10 1/2 1/2 1 3 -032 49.60 39.68

4 Flute Center 2 & 4 Flute Drill Point TiAIN Cutting Single Solid Carbide End Mills Coated End Mills APPLICATIONS: MICROSHIELD™ TiAIN - • Countersinking 90° INCLUDED POINT ANGLE TOLERANCES: Titanium Aluminum Nitride: Mill Diameter +.001,-.000 • Chamfering Shank Diameter -.0001, -.0005 TiAlN offers a higher level of • Drilling thermal stability above TiN and • Milling Single end mills are designed for general milling operations. TiCN with abrasion resistance. • Spotting The spiral multi-flute design permits a faster and smoother cutting Ideal for high heat applications action. The end cutting edges are ground to permit center cutting. found in milling steels, stainless steels and high temp alloys with a hardness of 52 HRC and below. HIGH SPEED STEEL 2 Flute 4 Flute Shank Flute Part No. Reg. Part No. Reg. Size Dia. Length OAL 1-325DT- Net Price SALE! 1-326DT- Net Price SALE! Mill Shank Length Part No. Reg. 1/8" 1/8" 1/2" 1-1/2" -008 $19.75 $16.79 -008 $19.75 $16.79 Dia. Dia. Of Cut OAL 5-307A- Net Price SALE! 3/16 3/16 5/8 2 -012 25.11 21.34 -012 25.11 21.34 1/8" 3/8" 3/8" 2-5/16" -26004 $19.44 $16.52 1/4 1/4 3/4 2-1/2 -016 32.74 27.83 -016 32.74 27.83 3/16 3/8 1/2 2-3/8 -26010 19.44 16.52 5/16 5/16 13/16 2-1/2 -020 44.36 37.71 -020 44.36 37.71 1/4 3/8 5/8 2-1/2 -26014 18.65 15.85 3/8 3/8 1 2-1/2 -024 48.14 40.92 -024 48.14 40.92 5/16 3/8 3/4 2-1/2 -26018 18.65 15.85 7/16 7/16 1 2-1/2 -028 76.34 64.89 -028 76.34 64.89 3/8 3/8 3/4 2-1/2 -26022 19.00 16.15 1/2 1/2 1 3 -032 82.03 69.73 -032 82.03 69.73 1/2 1/2 1-1/4 3-1/4 -26026 27.39 23.28 5/8 5/8 1-1/4 3-1/2 -040 132.25 112.41 -040 132.25 112.41 5/8 5/8 1-5/8 3-3/4 -26030 34.38 29.22 3/4 3/4 1-1/2 4 -048 196.70 167.20 -048 196.70 167.20

6 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com CUTTING TOOLS Screw Solid Carbide Machine Hi-Tuff Drills Drills Series 205 Designed for drilling 135° POINT Part No. Reg. stainless steel, tool Size OAL 1-050AX- Net Price SALE! FEATURES: steels, titanium, nickel • Fine grain 6% cobalt C-2 grade. base alloys & other high 1/16" 1-5/8" -004 $1.91 $1.53 strength ferrous metals. 5/64 1-11/16 -005 1.98 1.58 • Screw machine lengths and a heavy 3/32 1-3/4 -006 2.05 1.64 web provide extra rigidity and strength. 7/64 1-13/16 -007 2.08 1.66 • Web-thinned drill point reduces power requirements, 1/8 1-7/8 -008 2.12 1.70 lowers drilling temperatures and extends tool life. 9/64 1-15/16 -009 2.28 1.82 5/32 2-1/16 -010 2.49 1.99 135O SPLIT Flute Part No. Reg. 11/64 2-1/8 -011 2.69 2.15 POINT Size Dia. Length OAL 5-100- Net Price NOW! 3/16 2-3/16 -012 2.83 2.26 13/64 2-1/4 -013 3.14 2.51 RIGHT HAND 1/64" .0156" 3/16" 3/4" -25013 $21.38 $18.17 7/32 2-3/8 -014 3.39 2.71 1/32 .0312 3/8 1-1/8 -25073 20.41 17.35 15/64 2-7/16 -015 3.55 2.84 3/64 .0469 1/2 1-1/2 -25136 22.88 19.45 1/4 2-1/8 -016 3.68 2.94 BLACK OXIDE 1/16 .0625 5/8 1-5/8 -25169 22.88 19.45 SURFACE 5/64 .0781 11/16 1-11/16 -25199 24.06 20.45 17/64 2-5/8 -017 4.40 3.52 3/32 .0938 3/4 1-3/4 -25232 24.06 20.45 9/32 2-11/16 -018 4.54 3.63 TREATED 19/64 2-3/4 -019 5.05 4.04 Increases 7/64 .1094 13/16 1-13/16 -25265 25.06 21.30 abrasion 1/8 .1250 7/8 1-7/8 -25295 27.18 23.10 5/16 2-13/16 -020 5.18 4.14 9/64 .1406 15/16 1-15/16 -25319 33.19 28.21 21/64 2-15/16 -021 6.27 5.02 resistance, 11/64 .1719 1-1/16 2-1/8 -25379 39.20 33.32 11/32 3 -022 6.75 5.40 reduces the 3/16 .1875 1-1/8 2-3/16 -25406 42.70 36.30 23/64 3-1/16 -023 7.33 5.86 amount of chip 3/8 3-1/8 -024 7.67 6.14 13/64 .2031 1-3/16 2-1/4 -25439 52.01 44.21 welding and 7/32 .2187 1-1/4 2-3/8 -25466 53.78 45.71 25/64 3-1/4 -025 8.73 6.98 improves 13/32 3-5/16 -026 8.97 7.18 15/64 .2344 1-5/16 2-7/16 -25490 57.46 48.84 27/64 3-3/8 -027 9.75 7.80 the chip flow. 1/4 .2500 1-3/8 2-1/2 -25514 59.96 50.97 7/16 3-7/16 -028 10.03 8.02 17/64 .2656 1-7/16 2-5/8 -25535 86.94 73.90 29/64 3-9/16 -029 11.66 9.33 9/32 .2812 1-1/2 2-11/16 -25562 90.50 76.93 15/32 3-5/8 -030 12.41 9.93 Buy In Package Quantity: 19/64 .2969 1-9/16 2-3/4 -25583 90.65 77.05 31/64 3-11/16 -031 12.86 10.29 Up to 5/16" 12 Per Pack 5/16 .3125 1-5/8 2-13/16 -25601 90.65 77.05 1/2 3-3/4 -032 12.99 10.39 21/64" to 1/2" 6 Per Pack 21/64 .3281 1-11/16 2-15/16 -25622 105.58 89.74 11/32 .3438 1-11/16 2-15/16 -25643 117.45 99.83 23/64 .3594 1-3/4 3-1/16 -25664 134.67 114.47 3/8 .3750 1-13/16 3-1/8 -25682 146.34 124.39 Cobalt Silver & Cobalt HSS is used for drilling in tough, high Deming Drills tensile strength materials. High Performance Solid Carbide 1/2" Shank, 6" OAL NC Spotting Drills HIGH SPEED 142O POINT ANGLE STEEL 118O POINT Spotting drills are FEATURES: designed with a narrow • Expands the size range capacity Part No. Reg. chisel edge for quick of a 1/2" portable drill chuck. Size 1-060C- Net Price NOW! starting and constant • Common flute and overall 9/16" -036 $36.24 $30.80 web to allow for length for minimal adjustment 5/8 -040 40.98 34.83 Flute Part No. Reg. resharpening without the during tool changes. 3/4 -048 49.41 42.00 Size Length OAL 1-090A- Net Price SALE! need for web thinning. • Made of heat resistant, 8% 13/16 -052 56.58 48.09 1/8" 5/8" 1-1/2" -34184 $27.02 $22.97 cobalt HSS, with heavy-duty 7/8 -056 60.93 51.79 3/16 13/16 2 -34189 35.51 30.18 flute construction. 15/16 -060 68.11 57.89 1/4 13/16 2-1/2 -34144 45.31 38.51 • Precision ground for high 1 -100 80.12 68.10 5/16 7/8 2-1/2 -34314 54.65 46.45 degree of concentricity between 1-1/4 -116 110.05 93.54 3/8 7/8 2-1/2 -34384 62.56 53.18 shank & body diameter. 1-1/2 -132 149.78 127.31 1/2 1-1/8 3 -34124 97.82 83.15

29 Pc. Screw Cobalt Machine Drill Set Jobbers Drills For drilling tough, high FEATURES: tensile strength materials. HIGH SPEED STEEL • Primarily for use in screw machines. 1/16" to 1/2" by 64ths 135° SPLIT POINT • Performs well in limited access areas Heat resistant 8% cobalt and or where extra rigidity is required. HIGH SPEED STEEL heavy-duty flute construction. RIGHT HAND • Short length provides increased 118° POINT rigidity in machine drilling. Part No. Reg. • Also referred to as "stub drills". RIGHT HAND Size OAL 1-011A- Net Price NOW! 1/16" 1-7/8" -004 $3.42 $2.91 Part No. 1-050A-000 5/64 2 -005 3.42 2.91 $ 70 3/32 2-1/4 -006 3.42 2.91 Reg. Net Price $214.94 182 7/64 2-5/8 -007 3.61 3.07 1/8 2-3/4 -008 4.34 3.69 9/64 2-7/8 -009 4.39 3.73 5/32 3-1/8 -010 4.94 4.20 11/64 3-1/4 -011 5.21 4.43 3-In-1 Jobbers 3/16 3-1/2 -012 5.80 4.93 13/64 3-5/8 -013 7.00 5.95 Drill Set 7/32 3-3/4 -014 7.68 6.53 15/64 3-7/8 -015 8.14 6.92 HIGH SPEED STEEL 1/4 4 -016 8.60 7.31 118° POINT RIGHT HAND 17/64 4-1/8 -017 9.85 8.37 9/32 4-1/4 -018 10.31 8.76 Designed to perform in a wide 19/64 4-3/8 -019 12.61 10.72 variety of normal conditions and 5/16 4-1/2 -020 13.35 11.35 in a broad range of materials in 21/64 4-5/8 -021 14.81 12.59 11/32 4-3/4 -022 16.17 13.74 both machine and portable drilling. 23/64 4-7/8 -023 18.77 15.95 1/16" to 1/2" by 64ths, 3/8 5 -024 18.47 15.70 No. 1 to No. 60 & A to Z 25/64 5-1/8 -025 21.24 18.05 13/32 5-1/4 -026 22.05 18.74 Part No. 27/64 5-3/8 -027 24.47 20.80 7/16 5-1/2 -028 24.98 21.23 1-001A-0115 29/64 5-5/8 -029 30.19 25.66 Reg. Net 15/32 5-3/4 -030 30.73 26.12 $ 86 31/64 5-7/8 -031 31.65 26.90 Price $666.08 532 1/2 6 -032 31.14 26.47

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 7 CARBIDE TOOLING MWLN R 5˚ A Indexable F NIKCOLE MINI-SYSTEMS Toolholders Grooving & For Grooving STYLE L 7˚ NE G RAKE 5˚ C Cut-Off Set 7˚ NEG & Cut-Off Under FEATURES: .078" Width • Negative 5O end or B RIGHT HAND SHOWN B side cutting edge angle. LEFT HAND OPPOSITE • For use with negative 80° trigon WNMG inserts. E

Shank Shank WNMG Tool Height Width OAL Insert Part No. Reg. Style A B C E F Series 1-285R- Net Price NOW! MWLNR 12-3B 3/4" 3/4" 4-1/2" 1" 1" 332 -129 $110.11 $93.59 MWLNR 12-4B 3/4 3/4 4-1/2 1-1/4 1 -065 110.11 93.59 MWLNR 16-4D 1 1 6 1-1/4 1-1/4 432 -070 117.13 99.56

H =H MTGN R 1 FEATURES: SET INCLUDES: • The only system that • (1) Right Hand H Indexable 1 MTGNR H provides youwith two Toolholder Toolholders cutting edges in one 1/2" SQ x 4-1/2" L. insert in extremely • (5) TiN Coated MTGNR B narrow widths. Standard Grooving FEATURES: F • Positive locking insert Inserts: • 0° side cutting edge angle. screw and unique insert • .035" W x .100" T • For use with 60° triangular 90o pocket design assures • .043" W x .235" T negative clearance TNMG inserts. L a repeatable cutting • .051" W x .235" T Right Hand Shown, Left Hand Opposite edge location. • .063" W x .235" T TNMG • .073" W x .235" T Tool Width Height Length Insert Part No. Reg. • (1) Screw & Torx Key. Style B H L F Series 6-742R- Net Price SALE! Supplied with a fitted case. MTGNR 12-3B 3/4" 3/4" 4-1/2" 1" -012 $120.72 $102.61 MTGNR 16-3D 1 1 6 1-1/4 33 -016 125.44 106.62 Part No. 1-293-015 $ 91 MTGNR 16-4D 1 1 6 1-1/4 -216 141.98 120.68 Reg. Net Price $244.60 207 MTGNR 20-4D 1-1/4 1-1/4 6 1-1/2 43 -220 146.84 124.81

Tool Blocks Style WNMG-GM 1-Piece Flexible Clamp Carbide Inserts Grade TG-320 Coated FEATURES: • Double sided. • 0° relief angle. • GM chip control. • Pin and clamp insert. • Depth of Cut: .028" ~ .157". • Feed Rate: .004" ~ .020"/rev. • Use for medium to light cuts. 80o TRIGON Block Blade Part No. Reg. ASA Insert Hole Corner Part No. Reg. No. Size C H H1 E B G 6-895- Net Price NOW! Code IC Size Dia. Thick. Radius 1-2443- Net Price SALE! 19-5 1.02" .79" 1.02" .830" 1.50" .315" 3.5" -6195 $203.75 $173.19 WNMG-332-GM 3/8" .150" 3/16" 1/32" -915 $12.25 $9.80 19-6 1.26 .79 1.26 .970 1.89 .512 4.0 -6196 212.45 180.58 WNMG-432-GM 1/2 .203 3/16 1/32 -921 14.50 11.60 25-6 1.00 1.26 .970 1.89 .315 4.3 -6256 212.45 180.58

Grade TG-320 - Excellent coated grade Buy In for general purpose cuts in steel & steel Package Quantity: alloys. Equivalent to P10-P30 grade. 10 Per Pack Recommended Cutting Speed: 500-1,000 SFM. Style TNMG Carbide Inserts Grade TG-320 Coated FEATURES: • Double sided. • Pin and clamp insert. • 0° relief angle. • Use for medium cuts. • Standard chip control. • Depth of Cut: 5/64" ~ 15/64". • Feed Rate: .010" ~ .020"/rev. TRIANGULAR ASA Insert Hole Corner Part No. Reg. Code IC Size Dia. Thick. Radius 1-2443- Net Price SALE! TNMG-222 1/4" .090" 1/8" 1/32" -621 $10.40 $8.32 TNMG-321 3/8 .150 1/8 1/64 -622 11.70 5.85 TNMG-322 3/8 .150 1/8 1/32 -623 11.70 9.36 TNMG-323 3/8 .150 1/8 3/64 -624 11.70 9.36 TNMG-324 3/8 .150 1/8 1/16 -625 11.70 9.36 TNMG-331 3/8 .150 3/16 1/64 -626 12.75 10.20 TNMG-332 3/8 .150 3/16 1/32 -627 12.75 10.20 TNMG-431 1/2 .203 3/16 1/64 -628 18.10 14.48 TNMG-432 1/2 .203 3/16 1/32 -629 18.10 14.48 TNMG-433 1/2 .203 3/16 3/64 -630 18.10 14.48 TNMG-434 1/2 .203 3/16 1/16 -631 18.10 14.48 TNMG-438 1/2 .203 3/16 1/8 -632 18.10 14.48 TNMG-542 5/8 .253 1/4 1/32 -633 29.00 23.20 TNMG-543 5/8 .253 1/4 3/64 -634 29.00 23.20

8 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com CARBIDE TOOLING SPBA-S Cut-Off Blades SP Carbide Inserts GRADE NC-3030: Excellent coated grade for rough cuts in steel & steel alloys. Equivalent to P20-P40 & M20-M40 grade. Recommended Cutting Speed: 250-650 SFM.

Insert Part No. Reg. Style W l r 1-244X- Net Price SALE! Block Part No. Reg. SP200 .087" .366" .008" -SP2 $18.15 $15.43 No. H W L h 1-244- Net Price NOW! SP200R .087 .366 .008 -SP2R 18.15 15.43 SP200L .087 .366 .008 -SP2L 18.15 15.43 100-S-2 1" 1/16" 4-3/8" .827" -009 $156.80 $133.28 100-S-3 1 3/32 4-3/8 .827 -010 156.80 133.28 SP300 .122 .445 .008 -SP3 18.30 15.56 100-S-4 1 1/8 4-3/8 .827 -011 156.80 133.28 SP300R .122 .445 .008 -SP3R 18.30 15.56 100-S-5 1 5/32 4-3/8 .827 -012 156.80 133.28 SP300L .122 .445 .008 -SP3L 18.30 15.56 125-S-2 1-1/4 1/16 6 .984 -013 156.80 133.28 SP400 .161 .445 .010 -SP4 18.95 16.11 125-S-3 1-1/4 3/32 6 .984 -014 156.80 133.28 SP400R .161 .445 .010 -SP4R 18.95 16.11 125-S-4 1-1/4 1/8 6 .984 -015 156.80 133.28 SP400L .161 .445 .010 -SP4L 18.95 16.11 125-S-5 1-1/4 5/32 6 .984 -016 156.80 133.28 SP500 .201 .449 .012 -SP5 19.85 16.87

Indexable 4 Pc. Boring Bar SCLCR Sets Coolant-Thru FEATURES: Boring Bar Set • New cutting edge by o o simply indexing the insert. 90 Boring & Facing 95 Approach

• Chip breaker eliminates O long stringer chips. For use with 80 diamond Round shanks allow positive clearance CCMT inserts. positive or negative rake. SET INCLUDES: Supplied in a fitted wooden case. • All tools take one size • (4) Boring Bars: 1/4", 5/16", 3/8", 1/2". insert and screw. • 4-Layer Coated Carbide Inserts. Part No. 1-428-400100 $ 23 • Torx Screws & Torx Key. Reg. Net Price $444.70 Set #1 400 Part No. 1-512-720 Shank Bore Min. Description Dia. OAL Depth Bore Reg. Net Price $214.83 Buy In Package Quantity: 10 Per Pack 2-3/4" 1-1/4" 7/16" TNMC Threading $ 35 3-5/8 2-1/8 7/16 Set #1 .500" o 193 3 1-1/2 1/2 Inserts 5o 0o 60 4 2-1/2 1/2 O 60 ‘V’ .003 FLAT Set #2 3 1-1/4 7/16 .005 Part No. 1-512-725 3-7/8 2-1/8 7/16 SCREW 3-1/4 1-1/2 1/2 D 6-1/2o RELIEF Reg. Net Price $368.05 Set #2 .625 4-1/4 2-1/2 1/2 ON INSERT 3-1/2 1-3/4 9/16 BOTH SIDES $ 25 4-5/8 2-7/8 9/16 On edge style 0° rake precision I.C. 331 3-3/8 1-3/8 7/16 ground with double countersinks. T 4-1/4 2-1/4 7/16 Set #3 3-5/8 1-5/8 1/2 C-2 C-5 Coated Part No. 1-2442- Part No. 1-2445- Part No. 1-2448- Part No.1-512-730 Set #3 .750 4-5/8 2-5/8 1/2 Reg. Net Price $555.43 3-7/8 1-7/8 9/16 Insert Part Reg. Reg. Reg. 5 3 9/16 Style I.C. No. Net Price NOW! Net Price NOW! Net Price NOW! 4-1/4 2-1/4 11/16 $ 89 5-1/2 3-1/2 11/16 TNMC-32-NV 3/8" -754 $13.76 $11.70 $14.99 $12.74 $16.75 $14.24 499 NP TNMC-43-NV 1/2 -756 15.42 13.11 16.37 13.91 17.47 14.85 Negative / Positive Frustroconical Land SmoothGrind® ® Freedom Cutter PS 4" SDNCN Indexable Carbide Power Power Shear Threading Toolholders Medium Dish ® O Shear Inserts IC SmoothGrind 55 ‘V’ Turning Power Shear: This blade has a medium dish SS grind compared to the Super Shear blade. The TSuper Shear stronger cutting edge allows for heavier chip load + High Dish ® per blade; up to .010" on metals under 28 RC C SmoothGrind and up to .008" on materials up to 34 RC. R F INSERT SPECIFICATIONS: Shape I.C. T C R FEATURES: 62.5 • For use with DCMT 55O Octagon .062" diamond positive Square .625" .187" 20O .032 Round .312 clearance style inserts. • Each holder includes high GRADE SELECTIONS: precision M2.5 x T8 Torx Type of Screw and Torx key. MTC No. ANSI No. Coating Applications A good all around tool for all MTC-51 C-5 None types of steels and continous DCMT 21.51 INSERT chip materials under 28 Rc. 55o Diamond This advanced PVD coating allows Part No. 1-428-501200 MTC-357 C-5/C-7 PVD TiAlN for elevated SFPM on all types of NOW ONLY! $14.16 steel and cast materials. SDNCN

Uncoated (MTC-51) Coated (MTC-357) Over DCMT Tool Square Insert Insert Part No. Reg. Part No. Reg. Part No. Reg. Style Shank F Series 1-428- Net Price SALE! Insert No. Shape 1-2655- Net Price NOW! 1-2658- Net Price NOW! SDNCN 0505 H2 5/16" .157" -103761 $70.45 $63.41 PS-45L Octagon -020 $22.48 $20.23 -020 $24.03 $21.63 SDNCN 0606 H2 3/8 .189 -103762 82.46 74.21 PS-032 Square -025 22.48 20.23 -025 24.03 21.63 SDNCN 0808 H2 1/2 .250 21.51 -103763 86.80 78.12 PS-312 Round -030 22.48 20.23 -030 24.03 21.63 SDNCN 1010 H2 5/8 .313 -103764 96.33 86.70

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 9 WORK HOLDING Vise Jaw Toolmakers The most advanced Precision Stop jaw stop to date! Steel Vise FEATURES: • Fits all milling machine FEATURES: vises with 1/2"-7/8" thick jaws • Single piece construction and 1/8" minimum protrusion. with V-grooved jaws. • 8-32 non-marring flat point set • All surface including jaws screws are used to secure stop rod. and base are precision • The stop pin is positioned completely ground square and parallel. below the top surface of vise jaw. • Clamping slots at bottom • 1/8" x 2" hardened, adjustable easily affix to angle plates, etc. side-to-side stop pin is used to SPECIFICATIONS: accurately locate workpieces. Made from Jaw Width ...... 2-3/8" • Body is made from anodized aluminum. hardened alloy steel. Jaw Depth ...... 1" • 1-1/8" wide body with 2 hardened steel Max. Jaw Opening ...... 2-1/8" guide pins and large #10 clamp screw. Part No. 2-466-000 $ 64 Body Length ...... 4-3/8" Reg. Net Price $115.80 92 Weight ...... 3.3 lbs. Part No. 1-811-14000 $ 86 Reg. Net Price $38.73 34 More Information @ KBCTools.com

Pro Mill Stop Traditional Drill Table Mount Press Vise FEATURES: FEATURES: • Fixed jaw is grooved. • Table Slot Width: 5/8" • Replaceable jaw plates. For drilling, grinding, • Versatile design rod to be quickly • Machined 4 sides so it can tapping, reaming & More! and accurately positioned. be used on sides or end. • Stop rod stays parallel to Includes SPECIFICATIONS: the milling machine table T-Nut. Model No. 14 Jaw Width ...... 4" • Lever arm can be rotated for cutter clearance Jaw Depth ...... 1-3/4" and accurately relocated for repeat setup. Part No. 1-549-14 $ 96 Jaw Opening ...... 4" (loosening & retightening of screw is required) Reg. Net Price $395.25 Weight...... 19 lbs. • Large 1/2"-13 bolt used to 335 rigidly attach lever arm to base. • Base of unit is keyed to T-slot in table. • Non-marring 1/4"-20 nylon tip set screw. • Non-marring 1/4"-20 flat point set screw. Low Profile Part No. 1-811-16000 $ 68 More Info. @ Drill Press Reg. Net Price $92.98 83 KBCTools.com Model Vises DPL40 FEATURES: 12" Horizontal/Vertical • Replaceable jaws. • Movable jaw on the DPL30 & 40 Rotary Table has a vertical andhorizontal V-groove. Low Profile • DPL60 smooth jaw; DPL80 stepped jaw. • Base has four 1/2" shoulder slots for quick, FEATURES: HUGE SAVINGS! easy positioning on drill press tables. • Rigid, low profile, compact design Quantities Limited. provides for three types of dividing: Model Jaw Jaw Jaw Weight Part No. Reg. 1.) Angular Indexing can be performed No. Width Depth Opening Height (lbs.) 1-549- Net Price SALE! through the graduated ring from 0 to 360° in increments of 1°. DPL30 3" 1-1/8" 3" 2-7/16" 10 -DPL30 $82.15 $69.83 2.) Rapid indexing is done by means DPL40 4 1-1/2 4 2-7/8 15 -DPL40 125.55 106.72 DPL60 6 2 6 3-9/16 34 -DPL60 285.20 242.42 of a special dividing mechanism in DPL80 8 2 8 3-9/16 54 -DPL80 430.90 366.27 divisions 2, 3, 4, 6, 8, 12 & 24 without any disassembly operations. 3.) Indexing with the set of special dividing plates. • Disengageable worm gear 6" Single permits direct & rapid indexing. • The table body is made of semi-steel. Station • Table can be used horizontally & vertically. Machine Vise Part No. 7-621-012 Reg. Net Price $9,236.99 LIFETIME $4,61850 WARRANTY INCLUDES: LARGEST OPENING IN • (2) Mounting ITS CLASS OF 9"! Bolts with Nuts. FEATURES: • (3) Dividing • The angled slide and Plates with Handle. Table with Mounted locking jaw design prevents Dividing Plate & Handle lifting of the moveable jaw. Part No. 1-903-PWS6900 SPECIFICATIONS: • Up to 8,200 lbs. of clamping force. Reg. Net Price $804.45 Diameter...... 12" • Bed height matched to size 2-7/8" Center Hole...... 3MT (73.025mm) +/- 0.0005". $ 01 Worm Ratio...... 1:90 • Stationary jaw has machined keyway 724 Flatness of for alignment of the vise and Clamping Surface ...... 0008" includes alignment rail for quick setups. SPECIFICATIONS: Parallelism of • Hardened vise bed and jaw plates. Clamping Surface to Base...... 0008" Max. Jaw Opening ...... 9" • Outside rail edges of the body are machined. Jaw Width ...... 5.94" Squareness of • More robust main screw that can handle higher Clamping Surface to Base...... 0008" Jaw Depth ...... 1.75" torque loads and transmit higher clamping pressure. Vise Length ...... 17.206" True Running of MT Center Hole ...... 0004" Table with • Footprint and distance from keyway to Indexing Accuracy ...... 1’ Mounted Vise Width ...... 8.77" stationary jaw same as major competitor. Weight ...... 81 lbs. Weight...... 176 lbs. Crank Wheel • Sealed bearing systemreduces clamping pressure and increases bearing life. REPEATABILITY 0.001"

10 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com WORK HOLDING

Model SDW35 SIDEWINDER™ Vises The Kurt SideWinder™ is a vise for doing 2nd op work holding the part vertically rather than horizontally. Mounts vertically to the back of any Kurt 6" or 8" vise with an integral bracket. The bracket will include a stabilization leg that will Model SDW25II mount to the table on the movable end of the vise and a workstop to position the height of the part. FEATURES: • For doing 2nd op vertical work. • Does not interfere Patent Pending. • Machining can be done on with the host vise. both vises in the same setup. • Pull type vise. Model Fits Jaw Max. Jaw Max. Clamp Adj. Range Weight Part No. Reg. • Vise is at an elevated position • AngLock® design. Number Vises Width Open Height Force (lbs.) of Workstop (lbs.) 1-5721- Net Price NOW! which is more conducive to • Has a stabilizer foot SDW25II 6" 2.5" 2.5" 1.06" 2,450 0-5" 20 -025 $596.44 $536.80 longer reach machining. for vibration control. SDW35 6" or 8" 3.47 3.75 1.235 4,000 0-5.75 45 -035 938.18 844.36

FEATURES: • 80,000 PSI ductile iron • DX6™ CrossOver™ vise is a body, nut & movable jaw. combination of AngLock®, Pull-Type • Repeatability within .001". DX6™ Crossover™ Vise and 4 bolt stationary jaw design. • Chip evacuation straight – AngLock® design reduces through the body. stress on body during clamping. • Large 9" jaw opening. – Pull-type design reduces • GrooveLock jaw plate stress on body during clamping. and workstop included. – 4 bolt design reduces stationary jaw • New brush seal design deflection & alleviates body stress. makes it easier to replace. • Bed height matched to size • Fits on D50-4-SA swivel base. 2.875" (73.025mm) ±.0005". • Hardened vise bed/jaw plates.

Max. Max. Model Jaw Jaw Jaw Vise Vise Clamping Weight Part No. Reg. No. Width Opening Depth Length Width Force (lbs.) (lbs.) 1-5721- Net Price SALE! DX6 6" 9.08" 1.735" 16.810" 7.391" 7,342 65 -DX6 $1055.86 $897.48

1. Workstop assembly, suitable to use with 2"-6" jawplates. Part No. 1-5721-WSRL46 $ 57 GrooveLock™ Reg. Net Price $30.63 27 WSRL46 WSRLE46 Workstop 2. Extended length workstop Jaw Plates assembly, suitable to use with 4" & 6" jaw on outside. FEATURES: Part No. 1-5721-WSRLE46 $ 27 • Does not interfere Reg. Net Price $40.30 with part or spindle. 36 • Single bolt design for tightening workstop. 3. 6" groove-lock jaw plate 5. Replacement • Simple, functional, (not reversible). clamp assembly. integral workstop system. Part No. 1-5721-D60-315 $ 48 Part No. 1-5721-WSRL4686S $ 86 • Multiple parts can be located Reg. Net Price $66.09 59 Reg. Net Price $20.96 18 on the same jaw plate.

Compound Angle Plates Slide FEATURES: Table • Hardened to RC 58-62. • Ground flat, square & parallel within 0.0002". Part No. • Solid 1-piece steel construction for longer life. 8-400-310 Reg. Net Weight Part No. Reg. Price $308.45 Dimensions (lbs. - oz.) 1-814- Net Price NOW! SPECIFICATIONS: 3" x 3" x 4" x 1" 4.8 -105 $178.65 $151.85 $ 76 Table ...... 12" 4 x 4 x 4 x 1 7.8 -106 214.85 182.62 246 Height ...... 4-1/2" 4 x 4 x 6 x 1-1/4 10 -108 279.35 237.45 Travel ...... 6-1/2" longitudinal, A heavy, rugged slide used in all ...... 4-1/2" transverse kinds of positioning, milling, drilling, T-Slot Size ...... 9/16" microscope viewing and staging. Weight ...... 36 lbs. Soft Top Jaws American Standard For Bergman, Bison, Cushman, Huron, Rohm, Forkhardt, Pratt Burnerd America, SCA, SP, W&S, Nobel and Yuasa Tongue & Groove (A.S.T.G.) chucks. All Jaws are made from 1018 Mild Steel.

STANDARD HEIGHT Chuck H&R Part No. Reg. Net Size Reference # A B C D E F Bolt J 7-905- Price Ea. NOW! 6" HR-459-P 3-3/16" 1-5/8" 1-1/4" 5/16" 1/2" 1.50" 3/8" 1-11/16" -002 $38.45 $34.61 8 HR-450 3-1/2 1-5/8 1-1/4 5/16 1/2 1.75 3/8 1-5/8 -003 29.89 26.90 8 HR-462-P 3-15/16 1-5/8 1-1/4 5/16 1/2 1.75 3/8 2-1/4 -004 42.01 37.81 10 HR-452 4-1/4 1-7/8 1-1/2 1/2 3/4 2.12 1/2 1-15/16 -005 38.45 34.61 MEDIUM DUTY 10 HR-464-P 4-13/16 1-7/8 1-1/2 1/2 3/4 2.12 1/2 2-11/16 -006 49.84 44.86 12 HR-454 4-7/8 2-3/8 1-3/4 1/2 3/4 2.50 1/2 2-5/16 -007 42.71 38.44 1/8" TONGUE HEIGHT P=Pointed Jaw

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 11 WORK HOLDING 6 Pc. Quick Change Tool Post Set Mini Horizontal/Vertical Lathe Swing 10 to 15" Rotary Tables

All toolholders are More Information interchangeable @ KBCTools.com FEATURES: with Aloris type • Table clamping toolholders. surface are precision ground and cylindrical SET INCLUDES: center bore concentric. • Piston Type Tool • Dual position tables used for Post Series 200 (200). circular cutting, angle setting, • Turning & Facing boring & spot facing operations. Holder #1 (201). • Horizontal and vertical rotary • Boring, Turning & tables come with 360° graduations. Face Holder #2 (202). • Features dual positive action locks • Heavy-Duty Boring Bar with extra deep coolant channel. Indexing plate Holder #4 (204). • Complete with a pair of mounting clamps. not included. • Universal Parting Blade Holder (207). Center Worm Weight Part No. Reg. • Knurling, Turning Part No. 1-459-600 $ 08 Diameter Hole Ratio (lbs.) 1-397- Net Price NOW! & Facing Holder (210). Reg. Net Price $449.50 382 3" 1 MT 1:60 8.9 -5566 $244.13 $195.30 4 2 MT 1:72 14.5 -5561 348.75 279.00 Magnetic Adjustable Link

FOR WELDING AND HOLDING CAT40 V-Flange STEEL PLATES IN POSITION. End Mill

Holders Part No. Reg. Two heavy-duty Alnico magnetic blocks Bore Proj. Dia. 7-520- Net Price SALE! 2" long x 1" square, linked together with 1/8" 2.37" .69" -22907 $131.75 $111.99 two nickel plated bars with wing nuts for Part No. 1-397-375 $ 25 FEATURES: 3/16 2-1/2 .69 -22909 131.75 111.99 easy angle adjustment. Reg. Net Price $42.65 1/4 3 .78 -22911 131.75 111.99 36 • High precision 3/8 3 1 -22915 131.75 111.99 bore (H ) is 5 1/2 1-3/4 1-1/2 -22917175 131.75 111.99 best in industry. 1/2 2-1/2 1-1/4 -22917212 131.75 111.99 • Taper ground to 1/2 3 1-1/4 -22917 131.75 111.99 Demagnetizer AT3 for maximum 1/2 4.63 1-3/4 -22918 171.28 145.59 ® 110V, 1 Phase spindle contact. 5/8 1-3/4 1-1/2 -22919175 131.75 111.99 • Individually 3/4 1-3/4 1-3/4 -22921175 148.88 126.55 inspected, tested & 3/4 3 1-3/4 -229213 131.75 111.99 MADE IN certified for accuracy. ENGLAND 1 1-3/4 2 -22925175 148.88 126.55 FEATURES: • Balanced to 15,000 1 4 2 -22925 148.88 126.55 • 60 Watt / 60 Cycle. RPM at G6.3. 1-1/2 4-1/2 2-1/2 -22929 187.09 159.03 • Furnished with 6' of flexible cable and built in buzzer. MOST Table Size: 4-5/8" x 6-1/4" x 3-5/8" 4MT POPULAR LIVE CENTERS Heavy Duty IN THE Model 956 Precision USA! Part No. 1-544-956 $ 09 Reg. Net Price $550.69 468 Live Center FEATURES: • A heavy-duty ball thrust

bearing takes all axial thrust. O D Boring Head & Carbide d 60 Ø • The rotating spindle is extended Ø Tipped Boring Bar Sets right through the tapered shank.

With R8 Removable Shank • Complete protection of bearings l Mk from the ingress of coolant, L dirt and dust is provided by 3" Dia. Boring Head (1-1/2"-18 Mount) the built-in oil-seal, which also w/ 12 Pc. C-6 Boring Bar Set prevents loss of lubricant. SPECIFICATIONS: Part No. 1-800-923B $ 42 • Two specially designed adjustable D...... 2.17" needle-roller bearings carry all radial loads. d ...... 1.38" Reg. Net Price $299.35 269 L ...... 7.64" 12 PC. C-6 BORING BAR SET INCLUDES: MADE IN CZECH REPUBLIC l ...... 1.48" Taper ...... 4MT Shank Min. Bore Shank Min. Bore Max. Speed ...... 4,000 RPM Dia. Bore Depth Dia. Bore Depth Part No. 1-506-400 $ 19 Max. Workpiece Weight..... 1,800 lbs. 7/16" 1-1/4" 11/16" 1-7/8" Reg. Net Price $401.40 Net Weight of Center ...... 3 lbs. 7/16 1-11/16 11/16 2-13/16 341 3/4" 7/16 2-1/4 3/4" 11/16 3-3/4 9/16 1-1/2 13/16 2-1/4 9/16 2-1/4 13/16 3-3/8 9/16 3 13/16 4-1/2 3 Pc. Fly Cutter Sets With Wooden Stand 9 PC. C-6 BORING BAR SET INCLUDES: Shank Min. Bore JUNIOR SET 2" Dia. Boring Head Dia. Bore Depth 1/2" Shank (7/8"-20 Mount) 5/16" 3/4" Part No. 1-512-12 $ 16 w/ 9 Pc. C-6 5/16 1-1/8 Reg. Net Price $36.45 Boring Bar Set 5/16 1-1/2 29 7/16 1-1/8 Part No. 1/2" 7/16 1-11/16 SENIOR SET 1-800-922B 7/16 2-1/4 3/4" Shank 9/16 1-1/2 Reg. Net $ 21 9/16 2-1/4 Counter Part No. 1-512-34 $ 80 Price $213.57 192 9/16 3 balanced. Uses standard toolbits. Reg. Net Price $53.50 42

12 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com WORK HOLDING Chuck Stop Set

Designed to locate shorter parts beyond the chuck jaws to provide clearance for facing operations.

FEATURES: 3-Jaw Lathe • The chuck stop includes 10 sets of different height parallel bars to Chucks achieve the required spacing. Parallel Semi-Steel Body bar heights from 1/2" to 1-5/8" in 1/8" increments. 0.0002" parallelism accuracy. FEATURES: • A centering plug is used to keep the unit • High value centered to the ID of the chuck and strong & lower cost. neodymium magnets secure it to the face • Maximum .003" TIR of the chuck. The included centering plug using nominating pinion. diameters are 1.4", 2", 2-1/2", 3", 3-1/2", & 4". • .001" repeatability using • The chuck stop is 6" in diameter. For use nominating pinion. on 6" diameter chucks and larger. Series 342 • Hardened scroll. Medium Duty • Three hardened pinions. Supplied in a case. • 1 year warranty. Value Line Part No. 1-811-30000 $ 00 PLAIN BACK w/ 2-Piece Reversible Jaws Reg. Net Price $310.00 279 Chuck Weight Part No. Reg. Dia. (lbs.) 1-495- Net Price SALE! 5" 11 -0500 $449.50 $382.08 Standard 6 25 -0600 503.75 428.19 8 34 -0800 658.75 559.94 Drill Sleeves 10 55 -1000 813.75 691.69 Morse Morse FEATURES: Taper Taper Part No. Reg. • Hardened and Hole Outside 1-5142- Net Price NOW! precision ground 1 3 -010 $11.80 $10.03 for high concentricity. 2 3 -015 11.80 10.03 4-Jaw • Designed to be used 2 4 -025 20.40 17.34 Independent with taper shank 3 4 -030 20.40 17.34 tools, providing 3 5 -045 27.70 23.55 Lathe Chucks accurate alignment 4 5 -050 27.70 23.55 Semi-Steel Body between the members. 5 6 -060 71.80 61.03 FEATURES: • Made of cast iron. • The solid reversible Supra-SK E Keyless jaws and operation screw Drill Chuck are made of high quality carbon steel jaws and are Keyless self-tightening drill chuck suitable hardened precision ground. for percussion drilling on hand-operated power tools. PLAIN BACK w/ Solid Reversible Jaws FEATURES: • Robust design. Chuck Weight Part No. Reg. Stressed components made from steel. Dia. (lbs.) 6-318- Net Price SALE! • No throughhole. Chuck must be 6" 9 -004 $239.32 $203.42 tightened onto spindle with high torque. 8 32 -005 306.90 260.87 • Retention of the clamping force even 10 55 -010 337.13 286.56 when used under difficult conditions. • Lightweight design for powerful SPECIFICATIONS: cordless and corded power tools. Size Capacity...... 1/32-1/2" • Clamping and radial locking Thread Mount ...... 1/2"-20 possible in one single movement. 5" 5C Collet Part No. 1-507-1193005 $ 00 Chuck MADE IN GERMANY Reg. Net Price $125.55 113 FEATURES: • Forged steel chuck used for turning, facing, boring, 13 Pc. R8 Round grinding and milling operations. Collet Set • Designed for use with all 5C collets. • Maximum Speed: 6,000 RPM. FEATURES: • Made of high grade steel. • Internal Thread: 7/16"-20. • Hardened & precision ground. Sizes: 1/8" to 7/8" by 16ths Part No. 1-519-020 2 YEAR QUALITY AND MADE IN Reg. Net Price $144.54 PERFORMANCE WARRANTY POLAND $ 86 Part No. 3-862-0501P $ 83 122 Reg. Net Price $740.98 629

R8 Shank ER32 Collet Chuck R8 FEATURES: Collet • Round nut. Rack • Collet changes minimized due to large holding range of each collet. Hi-impact plastic holder accommodates • Concentricity guaranteed to 0.0004". 14 larger tool holders. Holds a full set • Exclusive self-releasing system reduces sticking. and emergency collets in an angled seat area - with a more secure hold. SPECIFICATIONS: Part No. Gage Length ...... 2.28" Model R8-52 Diameter ...... 1.97" 7-171-3008 Overall Length ...... 6-1/4" Reg. Net $ 66 Part No. 1-588-R852 $ 54 TOOLS NOT Drawbar Thread...... 7/16"-20 Price $223.13 189 Reg. Net Price $50.05 42 INCLUDED.

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 13 ABRASIVES Surface Grinding Flap Wheels Wheels Premium Aluminum Oxide PREMIUM WHITE White Aluminum Oxide 1/4" SHANK GRAIN FEATURES: FEATURES: 7" x 1/2" x 1-1/4" - 3,600 RPM • Premium quality aluminum • For grinding oxide on a flexible hardened tool steel. Part No. X-weight cotton backing • Porous composition Grit 1-704- ONLY! for long working life. resists wheel loading; 46-H -002 $22.30 • Use on ferrous and cooler, free grinding. 46-I -052 22.30 non-ferrous metals. • Best for grinding hard 46-J -082 22.30 • Flexible, yet strong materials or thin, heat- 46-K -112 22.30 flaps for easy working sensitive workpieces. 60-H -142 22.30 on hard-to-reach places. 60-I -174 22.30 Balanced • Fast and cool-cutting action. 60-J -206 22.30 Cool Cutting 60-K -238 22.30 Vitrified Face Max. Part No. Reg. fully 80-K -272 22.30 Bond Dia. Width RPM Grit 1-619- Net Price NOW! guaranteed 100-K -278 22.30 3/4" 3/4" 30,000 60 -71000 $3.35 $3.02 3/4 3/4 30,000 80 -71001 3.35 3.02 3/4 3/4 30,000 120 -71002 3.35 3.02 1 1 30,000 60 -71034 2.90 2.61 Bench & Pedestal 1 1 30,000 80 -71035 2.90 2.61 Grinding Wheels 1 1 30,000 120 -71036 2.90 2.61 1-1/2 1 25,000 60 -71041 3.75 3.38 Brown Aluminum Oxide 1-1/2 1 25,000 80 -71042 3.75 3.38 1-1/2 1 25,000 120 -71043 3.75 3.38 General purpose off-hand work. 2 1 25,000 60 -71089 4.15 3.74 2 1 25,000 80 -71090 4.15 3.74 Part No. 1-595- 2 1 25,000 120 -71091 4.20 3.78 Max. 24-Q 36-M 36-O 46-M 60-M 80-M Reg. Size RPM Grit Grit Grit Grit Grit Grit Net Price SALE! 6" x 3/4"x H 4,456 — -38007 — -38008 -38009 -38010 $21.85 $18.57 6 x 1 x H 4,456 — — -38012 -38013 -38014 -38015 25.15 21.38 7 x 1 x H 3,760 -38016 -38017 — -38018 -38019 -38020 29.85 25.37 8 x 1 x H4 3,600 -38021 — -38022 -38023 -38024 -38025 38.00 32.30

Grinding Wheels EXPANDED LISTING! Scotch-BriteTM SIGMA∑ GREEN is an aggressive grinding wheel manufactured Clean & Strip Disc with a specialty grain and bond combination resulting in a better Silicon Carbide finish. This is achieved by constructing SIGMA∑ GREEN with a FEATURES: layer of coarse grain and a second layer of finer grain. • Aggressive, coarse grade, open-web disc engineered to effectively clean welds, remove rust and strip paint. FEATURES: TYPE 27 • The open construction and aggressive • 36 Grit, fast stock removal. abrasive properties provide a smooth • Grinds smooth and quiet. running wheel that resists loading • Reduces labor rates. when removing soft coatings. • Controlled grinding. Max. Arbor Part No. • Max. RPM: 4,000 • Superior finish. Size RPM Hole 1-603- ONLY! • Cool cutting. Angle Grinder 4-1/2" 13,300 7/8" -045 $9.52 Extra Coarse 6" Dia. x 1/2" Hole • High performance grain. 13,300 5/8-11 -050 11.96 Part No. 1-630-00948 12,200 7/8 -053 12.37 • Minimizes operator fatigue. 5" Reg. Net Price $26.63 • For aluminum, stainless steel, 12,200 5/8-11 -054 14.78 8,500 7/8 -055 14.94 mild steel, hard face, titanium, alloys. 7" $ 64 • Won't discolor or warp stainless. 8,500 5/8-11 -060 17.45 22 2" Turn-On 1/4" SHANK SHUR-KUT® Quick Disc Holder Medium Density Change Discs Type "S" with Mandrel Part No. 1-613-11173 Type "S" Interchangeable with 3M Roloc TS discs, $ 83 Merit Type II Twist-On, Norton Speed-Lok. PREMIUM 9 ALUMINUM OXIDE FEATURES: SHUR-BRITE® Surface Type "S" • General purpose grinding aid Conditioning Discs and aggressive stock removal. Finish Duty (F.D.) products enable FD Quick Change Discs • Mold and the operator to prepare the work cavity grinding. piece with a required surface finish. APPLICATIONS: • Deburring, edge breaking, surface Equal to SocAtt®, • Blending ® ® FEATURES: • Deburring leveling. PowerLock II , & Roloc TSM • Added flexibility. • Scale Removal APPLICATIONS: Part No. ONLY! • Maintain a repeatable • Rust Removal Size Grit 1-613- (per disc) measured finish. • Stock Removal • Weld removal - 24 -11110 $.93 • Provides a consistent cut rate. • Weld Splatter Removal Use grits 36-60. • Blending of pits, 36 -11111 .89 Part No. Reg. 40 -11112 .86 gouges, & surface 50 -11113 .86 Size Grit Color 1-613- Net Price NOW! imperfections - 2" 100/box 60 -11114 .80 Coarse Brown -10544 $1.64 $1.48 Use grits 80-120. 80 -11115 .69 2" Medium Red -10545 1.58 1.42 • Achieve various 100 -11116 .69 50/box Very Fine Blue -10546 1.58 1.42 STRONGER - QUICKER finish gradients - 120 -11117 .69 Super Fine Gray -38457 1.58 1.42 RELIABLE - LONGEVITY Use grit 180. 180 -11119 .69

14 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com ABRASIVES Bench Stones For multiple types of work including CRYSTALON (Silicon Carbide) cleaning, deburring, & polishing. 1" Shop Rolls Combination Grit Part No. Reg. Premium silicon Grit 1-622- Net Price NOW! carbide abrasive. 50 YARD LENGTHS 40 -040 $26.45 $22.48 Fast cutting stone; ALUMINUM OXIDE 60 -060 23.64 20.09 ideal for general 80 -080 20.85 17.72 sharpening of cutting FEATURES: 100 -100 18.45 15.68 120 -120 17.65 15.00 tools. Fast stock 6" x 2" x 1" Coarse/Fine. • Material is easily removal for quick 150 -150 17.65 15.00 torn to the length 180 -180 17.65 15.00 edge sharpening Part No. 1-632-85450 $ 79 and/or shape needed. with minimal loading. Reg. Net Price $35.05 220 -220 17.65 15.00 29 • Flexible backing for 240 -240 17.65 15.00 longer working life. 320 -320 17.65 15.00 • High quality friable grain. 400 -400 17.65 15.00 Machine Knife Stone Offers both coarse and fine sides for sharpening and honing paper and cloth-cutting knives and planer BASTARD CUT knives on the machine. The groove 6 Pc. 4" American around the middle of the stone protects Pattern File Set fingers and provides a secure hold. 4" Dia. x 1-1/2" Thick. SET Six of the Most Popular INCLUDES (1 EA.): 4" Files Packaged Part No. 1-632-87570 $ 65 • Warding File. Reg. Net Price $49.00 in Plastic Pouch. 41 • Half-Round File. Part No. • Round File. • Hand File. 1-552-22062 ® • Square File. Reg. Net $ 62 SHUR-BRITE 6" x 9" • Slim-Taper File. Price $81.90 69 Stainless Finishing Hand Pad Mill Files BASTARD CUT FEATURES: • Designed to impart grain finish on FEATURES: stainless steel. • Two square edges. • Great to reorient • Single cut on edge and sides. scratch patterns. • File tapers toward the point for detail. • Cleans discoloration from stainless steel. Per Part No. Reg. Net • Removes residue. Size Box 1-552- Price Ea. SALE! • Blend tool marks. 6" 12 -08354 $9.24 $7.85 8 12 -08497 11.14 9.47 10 12 -08642 14.28 12.14 Part No. $ 87 12 6 -08737 23.30 19.81 1-613-40754 3

3 Pc. Diamond Four of the Most Popular Hone & Multi-Purpose Blades in Stone Set MultiBurr One Innovative Tool Set. FEATURES: • 3/4" x 2" diamond pat on a This handy universal deburring set 6" x 3/4" plastic handle. with multi-purpose blades will help • Very effective in hard to get places you produce a perfect finish for a wide variety of jobs. The four folding SET INCLUDES: shafts can be locked into position • (1) Super Fine - 1200. during use and then folded neatly • (1) Fine - 600. back into handle, allowing the tool • (1) Medium - 400. to be carried simply anywhere. Model RG1000 Part No. 1-457-400 Part No. 1-609-LPAK3 $ 23 SET INCLUDES: Reg. Net Price $24.98 21 • S10 Blade - Works best on steel, aluminum and plastic. Reg. Net Price $86.10 • D50 Scraper Blade - Ideal for tool and die makers. • N2 Blade - Works best on brass and cast iron. $ 27 • Rotodrive Countersink Blade - Range 1-10.4mm, 90° angle. 60

External Deburrer FEATURES: S Promo N Tele • Quickly repairs damaged threads on steel bolts Set Set including stainless steel and hardened steel, SET INCLUDES: SET INCLUDES: threaded rod, copper, • Grip 1 Handle • NogaGrip 3 Handle. brass, aluminum, • (10) S10 Blades • N Holder, plastics, and wood. (5) N1 Blades, • Works with most power drills Model NG8150 (5) N2 Blades. on materials ranging from Part No. 5/16-7/8" (8-22mm). 1-457-742 Model NG8300 • Made from hardened steel. Reg. Net Part No. Price $18.20 1-457-552 Part No. 1-909-51950 Deburrs steel, Reg. Net Price $66.42 $ 47 Reg. Net $ 47 aluminum, plastic, 15 Deburrs steel, aluminum & plastic. Price $20.55 17 brass and cast iron. $5314

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 15 MEASURING & INSPECTION 6" Precision Dial Caliper Shockproof Dial Calipers With Thumb Roll with Thumb Roll

Supplied in a shop-hardened case. Part No. FEATURES: • Revolution: .100" 8-100-006 • Easily used, accurate - Reg. Net read directly to .001" Price $51.15 on large clear dial. Supplied in a • 4-way measurement. plastic case. $ 95 • Stainless steel with satin chrome finish. Range: 0-6" FEATURES: 34 • Stainless Steel. Part No. 1-815-105 $ 83 • 4-Way measuring. Reg. Net Price $77.45 65 • Tough shockproof design. • .001" (.02mm) reading dial face. 6" Fractional Electronic Caliper Range: 0-12" • .100" (2mm) range per revolution. Part No. 1-815-115 • Silky smooth movement throughout. $ 76 • Accuracy/Resolution/Grad.: .001" Reg. Net Price $143.25 121 • 1 Year Warranty.

Economy Digital Calipers Range: 0-6" (0-150mm) FEATURES: • SPC output. Part No. 1-812-650 • ON/OFF Button, inch/mm Reg. Net Price $69.67 conversion, and Zero Set • Resolution: .0005" (.01mm) FEATURES: $ 95 • Fractions by 1/64" increments. • Direct inch/metric • Resolution: 44 • Auto OFF after 4 mins. of inactivity. conversion. .0005" (.01mm) • Stainless steel frame. • ABS/INC • Large easy-to-read measurement. LCD display. • Includes molded case. • Patented ceramic IP54 Large Display capacitive sensor. Electronic Calipers Jaw Length Part No. Reg. INCH - METRIC - FRACTIONAL Range External Internal Thickness 54-100- Net Price SALE! 0-4" (0-100mm) 1.56" .635" .117" -001 $140.20 $112.16 0-6" (0-150mm) 1.56 .635 .117 -000 160.31 128.25 0-8" (0-200mm) 1.955 .700 .125 -008 206.55 165.24 0-12" (0-300mm) 2.40 .930 .125 -112 250.28 200.22

Poly-CalTM Electronic Caliper

FEATURES: Range: 0-6" (0-150mm) • Resolution: .0005" Part No. 1-815-100 $ 07 (.01mm / 1/128" fractional). Reg. Net Price $77.42 58 • Hardened stainless steel body. FEATURES: • Precision lapped finish for • Resolution: .0005" (.01mm) smooth travel. Range: 0-12" (0-300mm) • Fractions by 1/64" increments. • IP54 - Splash water, oil, and • Accuracy: +/-.008" dust resistant. Part No.1-815-120 $ 55 Reg. Net Price $167.40 • Polycarbonate frame. • 1 Year Warranty. 125 • 4-way measurement. Range: 0-6" (0-150mm) • Large easy-to-read display. Part No. 54-101-175 • Absolute/incremental measurement. $ 04 • Direct inch/metric/fraction conversion. ABSOLUTE Reg. Net Price $34.16 29 • Supplied with clip-on vinyl pouch. Digimatic Caliper Series 500 - With SPC Output Electronic Calipers

Range: 0-8" (0-200mm) Part No. 1-808-500172 FEATURES: Reg. Net Price $306.00 • Internal Measuring Nibs: .500" • RS232C Direct output. • Resolution: .0005" (.01mm) • All sizes feature fine $ 10 • Preset mode now includes adjustment screw. FEATURES: 260 offset for inside jaws. • Hold feature. • Resolution: .0005" (.01mm) • Inch/metric conversion. • Includes wooden case. • Large and clear LCD readout. • The ZERO/ABS key allows the display to be Zero-Set at any slider Jaw Part No. Reg. position along the scale for incremental comparison measurements. This Range Depth 54-100- Net Price SALE! switch will also allow return to the absolute (ABS) coordinate and display 0-12" (0-300mm) 3.5" -312 $288.77 $245.45 of the true position from the origin point (usually jaws-closed point). 0-24" (0-600mm) 4 -024 438.75 372.94 • Thumb roller included. 0-40" (0-1000mm) 4.9 -042 1343.25 1141.76 • Supplied in fitted case.

16 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com MEASURING & INSPECTION ­3" Feeler Precision Gages Radius Gage with Handle FEATURES: • Number of Blades: 26 • Blades made of finest feeler gage FEATURES: stock, hardened and tempered. • Range: 1/64" - 17/64" by 64ths • Each blade marked with thickness. & 9/32" to 1/2" by 32nds. • Steel case protects blades. • Number of Gages: 25 Tool No. RG1 • Lock nut holds blades • Satin chrome finish. Part No. securely in place. Straight Tapered • Five measuring surfaces for 8-410-009 THICKNESSES 1/2" Wide At Tip 1/4" Wide At Tip both convex and concave radii. • Designed for checking or laying Reg. Net INCLUDED: Part No. 1-804-519 Part No. 1-804-520 Price $51.15 .0015, .002, .0025, .003, .004, out concave or convex radii. Reg. Net Reg. Net • Used for inspection, layout, .005, .006, .007, .008, .009, Price $29.35 Price $29.35 $ 92 .010, .011, .012, .013, .014, pattern making and all 40 .015, .016, .017, .018, .019, $ 95 $ 95 other machining jobs. .020, .021, .022, .023, .024, .025" • Each gage is marked 24 24 clearly with its size. Supplied in a fitted case.

Dial Bore Gages Screw Pitch Gages Series 511 w/ 2923SB-10 Indicator

FEATURES: FEATURES: • Interchangeable anvils and necessary • 28 Blades included are both V, American accessories to perform close National & U.S. Standard 60O threads. tolerance I.D. measurements. • Narrow leaf blade for internal and external thread. • A Digimatic Indicator can be attached • Locking device at each end secures blades. in place of the dial gage. • Each blade clearly marked with proper thread size. • Accuracy: .0002" (5µm) • Carbide ball contact No. Of Part No. Reg. point for durability. INDICATOR FEATURES: Type Groups Blades Included 1-804- Net Price SALE! • Optional extension Range: .05" rods can be attached. Graduation: .0001" 1. 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 16 inch -511 $34.07 $28.96 Dial Reading: 0-5-0 English 2 2. 18, 20, 24, 27, 28, 32, 36, 40, 44, 48, 56, 64, 72, 80 inch No. of No. of Probe Part No. Reg. English/ 2 1. 4, 6, 8, 10, 11, 11-1/2, 12, 13, 16, 20, 28, 32, 40, 58 inch -513 34.07 28.96 Range Anvils Spacers Depth 1-808- Net Price SALE! Metric 2. .5, .75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 mm 2.0-6.0" 11 4 6" -511753 $472.00 $401.20 Metric 2 1. .25, .3, .35, .4, .45, .5, .55, .6, .65, .7, .75, .8, .85, .9 mm -515 34.07 28.96 6.5-10.0 6 7 10 -511755 822.00 698.70 2. 1, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2, 2.5 mm

IP54 ABSOLUTE Electronic Digital Bore Gage Set Extended Range Set With SPC Output

SET INCLUDES: • (3) Interchangeable Measuring Heads: - 0.7 to 1.5", 1.5 to 2", 2 to 6". FEATURES: • (3) Sets of Anvils with Carbide Points: • Extended Range Set from 0.7-6". - 0.7, 0.8, 0.9, 1, 1.1, 1.2, 1.3, 1.4" • Absolute Electronic Indicator: Replacement Battery - 1.4, 1.6, 1.8, 2" Range: 0-0.5" (0-12.7mm). 3-Volt Type CR2032 - 2, 2.2, 2.4, 2.8, 3, 3.2, 3.4, 3.6, 3.8, 4". Resolution: .00005" (.001mm). Part No. 1-541-358 • (1) 2" Extender. • Indicator is fully protected $3.84 • (3) Spacers/Washers: 0.02, 0.05, 0.1". by rugged cover IP54 rated. • Extended 2 Year Warranty. Part No. 1-815-405 $ 09 Supplied in a fitted plastic case. Reg. Net Price $401.45 301

Economy 81 Pc. Grade "B" Gage Pin Sets Rectangular Class ZZ Gage Block Set Supplied in high-quality FEATURES: fitted wooden case. • Measuring Range: Part No. - .100-12 in Steps of .001" 1-855-99923 - .200-12 in Steps of .0001" • Tolerance of ±50 µ in. Reg. Net • Etched, unique serial numbers Price $628.71 FEATURES: are included on each block. $ 40 • Uniform 2" length. • Includes a certificate of calibration*. • All gages within 0.0002". 534 • Sizes marked on storage case. SET INCLUDES: • Smooth finish 10 micro or better. • (9) Blocks .1001" - .1009" (Steps of .0001") • A must for checking hole diameter and • (49) Blocks .101" - .149" (Steps of .001") distance between holes and hole location. • (19) Blocks .05" - .95" (Steps of .05") • Heat treated to a hardness of 60/62 RC. • (4) Blocks 1" - 4" (Steps of 1")

Plus Minus * Calibration performed at Webber Gage in Cleveland, OH. Certificate Gage No. of Part No. Part No. Reg. of Calibration with NVLAP accreditation. Calibration in accordance Range Pieces 1-812- 1-812- Net Price SALE! with ISO 17025 with dated calibration certificate and NIST traceability number. Uncertainty of measurement (k=2): µ = 6+L where L is in .011-0.060" 50 -579 -580 $48.75 $39.00 inches, but µ not less than 7 µ in. .061-0.250 190 -589 -590 107.73 86.18 .251-0.500 250 -594 -595 174.15 139.32

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 17 MEASURING & INSPECTION 0-1" Dial Indicator MACHINIST’S MATE Continuous Dial, Jeweled with Lug Back Electronic Edge FEATURES: Finder • Satin-finish chrome plated • Contact point is made of FEATURES: forged brass case. hardened, ground and chrome • Finder lights up instantly • Precision ground hard plated tool steel. when stylus .200" dia. x 1/2" chrome plated stem. • Spindle rack, pinions and pivots length reaches the work edge. • Exact reading off any electrically Self-Contained Visual • Accuracy meets Federal of hardened stainless steel. For Machine Set-Up. Specifications. conductive metal with clean surface. • 1/2" dia. shank, 3-15/16" length. AGD Group 2 • Accurate to within .0005". Part No. 1-275-98315 SPECIFICATIONS: Part No. 1-808-2416S10 • Includes: (1) "AAA" Alkaline Battery, $ 39 Per Revolution ...... 10" Reg. Net Price $149.00 (1) Bulb in protective tube. Reg. Net Price $41.64 35 Graduation ...... 0010" Dial Reading ...... 0-100 $ 65 Dial Face Diameter:...... 2-1/4" 126 Water Resistant Indicator Set ABSOLUTE Digimatic IP54 X -PROOF INDICATOR FEATURES: ID-SX Indicator • Travel: 1". Series 543 - Simple Design • Reading: .001" • Sealed back plate. FEATURES: • Tolerance markers. • Dust/water protection level:IP42. • Rubber bellows on stem. • After the initial zero-setting with the ORIGIN • AGD Group 2, 2-1/4" dia. button, the repeated absolute positioning is • O-Ring seal on safety cap. no longer necessary over the entire battery life. • Lug back and carbide point. • Employing the ABSOLUTE linear encoder, • Robust, shockproof design. the ID-S always displays the spindle "Absolute • O-Ring protection Position" from the origin at power-on. Also, for bezel & rotating dial. unlimited response speed eliminates over-speed errors. • Continuous Reading: 0-100. • As compact as standard Series 2 dial indicators. • One battery (SR44) provides approx. 20,000 hrs. MAGNETIC BASE FEATURES: of continuous use. • 85 lb. pull. • Fine adjustment. SPC OUTPUT, STEM DIA. 3/8", #4-48 UNF THREAD, LUG BACK • V-base for placing Meas. Part No. Reg on round surfaces. Range Resolution Accuracy Force 1-808- Net Price SALE! • Also mounts test indicators with 1/4" post. 0-.5" (0-12.7mm) .0005" (.01mm) .0010" 1.5N -543783 $224.00 $190.40 or less • Base Dimensions: 2" x 2-11/32" x 1-13/16" • On/off lever release magnet.

"QUICK-SET" Part No. 52-585-155 $ 50 All packed in a Horizontal Dial Reg. Net Price $131.87 105 shop-hardened case! Test Indicator Series 513 IP65 Extended The most direct gear train design ever applied to test Range Test indicators means higher level of sensitivity, reliability, repeatability and accuracy throughout tool life. Indicator INCLUDES: FEATURES: FULL SET INCLUDES: • (2) Dovetail Stems. • Anti-magnetic. • Indicator • (3) Tungsten Carbide Part No. 1-815-355 • Jeweled bearings. • Holding Bar Points: .080", .040", .120". Reg. Net • No-clutch structure. • Knurled Clamp Ring • 1 Year Warranty. • Water and dust resistant. • (3) Carbide Contact Price $124.00 • Glare-free crystal with Points: .039", .079" .118" scratch-resistant coating. • Swivel Clamp For: .157" & 3/8" FEATURES: $ 20 • (2) Stems: .157" & 3/8" • Automatic reversal. 99 • Revolution counter. SPECIFICATIONS: • Jeweled movement. Range ...... 030" • Easy-to-read tilted dial. SPECIFICATIONS: Part No. 1-808-513402T Range ...... 060" Graduation ...... 0001" $ 70 • IP65 Protective Rating. o Dial Reading ...... 0-15-0 Reg. Net Price $162.00 137 Swivel Arc ...... 210 Supplied with a molded case. Dial Reading ...... 0-15-0 Horizontal Dial Test Indicator Set Universal Test Indicator Holder with KBC Dial Test Indicator

NOGA HOLDER FEATURES: SET INCLUDES: • Test indicator holder arm. • Test Indicator. • Holds indicators with • Height Gage Bar. 3/8" stem or dovetail. • (2) Contact Points. • Most useful for centering • Contact Point Wrench. holes on milling machine. • Universal Dovetail Clamp. • Dovetail Stems: 3/8" & 1/4" KBC HORIZONTAL • Supplied in fitted plastic case. DIAL TEST INDICATOR MODEL NF1018 FEATURES: (Part No. 8-100-055) • .030" Range, White Face • 1-3/16" dial face. SPECIFICATIONS: White Face Range ...... 030" • Graduation: .0005" Graduation ...... 0005" Part No. 8-100-4707 $ 22 • Dial Reading: 0-15-0 Part No. 1-457-908F Dial Reading ...... 0-15-0 Reg. Net Price $82.77 • Supplied with 2 stems $ 20 66 (5/32" & 3/8"). Reg. Net Price $146.50 117

18 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com MEASURING & INSPECTION IP65 Absolute Probe Indicators Edge & Center Finders with Remote Readout Single Head Type

FEATURES: FEATURES: • Accurately locate working • IP65 rating edges, shoulders, grooves, • Resolution: 0.00005"/0.001mm center points, and scribed lines. • Easy to read large • Time-saving positioning Remote access LCD display. tools for jig borers, milling • Spring load movement and other machines. with a push button. Tip Part No. Reg. • Indicator can be flat or Part No. Reg. • Hardened and Range Accuracy 1-815- Net Price SALE! centerless ground to Shank Dia. 1-805- Net Price SALE! lug back with included parts. • Standard 4-48 thread precision tolerance. 1/2" 1/2" -260 $23.30 $19.81 0-1" (0-25.4mm) .00020" -495 $234.05 $187.24 • All sizes are 3" long. 3/8" .2000" -263 24.45 20.78 with ceramic contact point. 0-2" (0-50.8mm) .00035 -501 327.05 261.64 • (2) 3V CR 2032 battery. 0-4" (0-100.6mm) .00040 -505 385.95 308.76

Fat & Fab Double Thread Detective® Thread Identifier Fine Adjustment Standard Combination Unit FEATURES: Precise & • Five axis holder. FEATURES: easy-to-use • Double Fine Adjustment: • Distinguish inch & metric threads. - Top: Universal Swivel Clamp • 6-32 to 1/2"-20 inch and M4x0.7 to M12x1.75 for nuts - Bottom: Unique Single Direction metric steel indentifiers on a wire lanyard. and bolts. • Powerful ON/OFF magnetic base (176 lbs./ft.). • Shatterproof, color coded gauge dividers. • Holds 6mm, 8mm, 3/8", dovetail and back lug. • Easy-to-read size markings laser • Instant fixation in any position. etched on each stand off. • Fast and easy to set up gauges into required position. • Unique central locking mechanism with Part No. 1-842-405 $ 53 NOGA designed spring loaded bearing. Reg. Net Price $64.15 • Black finished arms. 54 SPECIFICATIONS: Bottom Arm ...... 4.33" Top Arm ...... 3.98" Machinists’ Improved Levels Model No. DG6160 Series 98 with Ground & Graduated Vials Part No. 1-457-917 $ 64 FEATURES: Reg. Net Price $204.85 153 • Ground and graduated main vials. • Adjustable to a positive setting. • Base of the levels feature an involute groove running the Universal length of base, providing a reliable seat for round work. Adjustment Arm • With the cross test level, it’s with Magnetic Base possible to simultaneously level in both directions. FEATURES: • Case not included. • Easy on/off switch. • Magnetic base with Size 125 lbs. of pulling power. Starrett Part No. Reg. • Strong central locking mechanism. Part No. Inch mm Description No. 1-855- Net Price SALE! • Fine adjustment universal swivel clamp. 1-815-245 6" 150 With Cross Test Vial 98-6 -50441 $177.10 $150.54 • Anti-corrosive universal chrome arms. With Ground Single Plumb Vial • Adjustable arms with easy positioning Reg. Net 12 300 and Cross Test Vial 98-12 -50443 304.87 259.14 to retain required position. Price $65.88 • Holds 3/8" stem and dovetail (holds both ADG and test indicators). $ 95 • Top arm: 4.8", bottom arm: 5.8". 53 4 Pc. 12" Combination Series 9 • Total Reachable Length: 14". Square Set FEATURES: • With reversible lock bolts, Electronic scriber, spirit level in both Height Gage square head and protractor head, direct reading FEATURES: double 180O protractor • Range: 0-6" (0-150mm) • Manual on/off with auto scale, hardened steel, • Resolution: .0005" (.01mm) off after 5 min. of non-use. machine-divided blade. • Linear Accuracy: ±.001" • Scriber can reference zero Cast iron heads with black wrinkle finish. (±.02mm) from the base bottom. • Square head, center head and non- • Easy-to-read LCD with • Long life hardened, reversible protractor head and blade. .32" high characters. stainless steel bar. Starrett #9-12-4R • Rounded nose scriber • Slide lock and fine GRADUATIONS: cuts clean, sharp lines. adjustment thumb roll. Part No. 1-855-50042 $ 69 No. 4R - 8ths, 16ths, • Inch/millimeter conversion • Hardened, ground, Reg. Net Price $297.28 Quick Reading 32nds, 64ths and zero at any position. and lapped base. 252 Starrett #3751AZ Part No. 1-855-12221 $ 73 Supplied in Full Flexible Steel Rules Reg. Net Price $382.03 324 a case. Series 182

Center GRADUATIONS: Gage 16R: 32nds, 64ths, 50ths & 100ths Made of tempered steel Series 950 M2: 50ths, 100ths, 1mm &1/2mm and satin-chrome finish. M5: 1mm, 1/2mm, 1mm & 1/2mm Extremely durable for FEATURES: everyday use. Graduations • Hardened with lapped edges and notches. Part No. 1-808-950201 Part No. Reg. are marked on glare-free • Meets requirements of the American Reg. Net Price $20.00 Size (Grad.) Width 1-808- Net Price SALE! satin-chrome surface, National and US 60° Standards. 6"x 150mm (M2) 1/2" -182206 $17.00 $14.45 and deeply photoengraved • Scales with 14ths and 20ths graduations provided $ 00 150mm (M5) 1/2 -182211 26.00 22.10 for longer tool life. on one side, 24ths and 32nds on reverse side. 17 12" (16R) 1/2 -182222 35.00 29.75 Thickness: 1/64".

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 19 MEASURING & INSPECTION V-Blocks Set 10X LED Measuring with Clamps Magnifier Loupe FEATURES: LED LIGHT • Chrome & hardened steel. FEATURES: • Ground to 0.0005". • Adjustable focus. • Parallel on all sides. • Distortion free • Supplied complete with with fine resolution. zinc die cast clamps. • Seven powerful LED • 90O V with 45O even on lights with an on/off switch. each side. • Super high precision laser etched angle and length glass scales. SET INCLUDES: Part No. 1-815-700 • (1) "AG9" Battery included. • (2) 1-1/2 x 1-1/2 x 1-1/4" • (2) 2" x 1-1/2 x 1-1/2" Reg. Net Price $142.45 SPECIFICATIONS: • Compltete with heavy duty Viewing Area ...... 1-1/4" fitted case. $ 84 Reticle Diameter...... 34mm 106

Part No. 1-815-610 $ 08 Supplied with a Reg. Net Price $96.10 72 protective padded leather case. For Tire Tread Wear QuickCheck Electronic Measurement Supplied in a vinyl holster. Snap Thickness Gage FEATURES: FEATURES: • Super-large display. • Easy to read large LCD display. • Fractions in 1/64" increments. • Hold function. • Resolution: .0005" (.01mm) • Range: 1" (25mm) • Spring load movement with a push button. Part No. 54-225-500 • Perfect handhold design for easy usage. • Spring-loaded and hold measurement $ 86 • Interchangeable measuring anvils button for ease-of-use. Reg. Net Price $32.78 27 (includes 2 flat anvils & 1 ball anvil).

SPECIFICATIONS: 1-2-3 Block Range...... 0-1" Pairs Reading...... 0-1"/ .01mm/1/64ths Accuracy ...... ±0.0015" FEATURES: Battery...... 3V CR 2032 • Parallelism: ±.0002" • Precision ground and hardened on all sides. Part No. 1-815-605 $ 64 • Hardness HRC 56-60. Reg. Net Price $61.93 52 • Ideal for mounting work for precision grinding and layout. YOUR CHOICE $ 95 Magnetic Digital 19 1" x 2" x 3" Angle Protractor w/ 1 Hole Per Block Part No. 1-806-003H

FEATURES: 1" x 2" x 3" • Large LCD display. w/ 23 Holes Per Block. • Reversible reading. Five 3/8"-16 Tapped Holes • 3-side magnets Part No. 1-806-003T (bottom & 2 side walls). • Precision digital level sensor. • Hold and ZERO functions. • (1) 9V Battery Included. Toolmakers 3 Pc. Toolmakers’ • 1 Year Warranty. Surface 6" Spring Dividers SPECIFICATIONS: Gage & Calipers Set Part No. 1-815-200 Measuring Range ...... 360° (4 x 90°) With Reg. Net Price $75.56 Resolution...... 05° 9" & 12" Accuracy ...... ±.2° Spindles $ 67 Repeatability ...... 1° 56 Dimensions ...... 2.2" x 2.2" x 1.2" Part No. 1-397-121 Reg. Net Price $52.35 IP66 Electric Digital $ 88 Tool Setting Gage 41

FEATURES: • Range: 1/2" FEATURES: • Accuracy: ±.0015" • Solid nut and washer • Repeatability: ±.0001" FEATURES: permits fast and positive adjustment. • IP66 Protective Reading. • Bottom • Heat treated points to give • Alert back lite will light-up grooved for accurate measurement. when setting to zero. cylindrical work. • Spring is hardened & tempered. • 5 strong magnets on base. • Base has 2 • Legs are well finished & balanced. • Resolution: .00005" (.001mm). retractable • All dividers and calipers are made • Uses CR2032 gage pins to set of high grade polished steel. replacement battery. against edge of a surface plate. Part No. 1-812-106 Supplied in a strong Part No. 1-815-215 $ 81 • Has fine adjustment. Reg. Net Price $20.00 protective case. Reg. Net Price $131.75 98 • Front recessed for depressing spindle below base level. $ 00 • Base & scriber hardened. 17

20 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com MEASURING & INSPECTION IP65 Twin-Force 0-1" Coolant Proof Digital Micrometer Digimatic Micrometer Series 293 - with FEATURES: Ratchet Stop • Range: 0- 1"/0-25mm. • Resolution: 0.00005"/0.001mm. • Accuracy: ±0.00015". • IP65 Water & Dust Protective Reading. Part No. • TwinForce Movements: Friction and Ratchet. 1-808-293340 • Black anodized friction tube for easy Reg. Net grip and easy clean. Price $224.00 • Micro USB data output. • Ball attachment included. $ 40 • Protective case included. • (1) 3V CR 2032 battery. 190

Part No. 1-815-531 $ 88 FEATURES: Reg. Net Price $154.85 123 • Range: 0-1" (0-25mm) • IP65 protection level, enabling • Graduation: .00005" (.001mm) use in environments exposed • Auto power ON/OFF function. to cutting oil, etc. Anti-corrosion • Measurement data output treatment is required after use. Economy function is available with a water- • Certificate of inspection included. Micrometers resistant connection cable. • Supplied in fitted plastic case. FEATURES: • Carbide measuring faces. • Sizes over 1" include standard. • .0001" reading microfine graduations. • Meets or exceeds Federal specifications. • Ratchet thimble and locking nut. 0-3" Outside • Complete in case. Micrometer Set Series 103 Part No. Reg. Range 52-229- Net Price SALE! 0-1" -201 $54.00 $45.90 FEATURES: 1-2 -202 66.69 56.69 • Carbide faces. 2-3 -203 83.90 71.32 • Baked-enamel finished frame. • Ratchet stop or friction 0-3" Set thimble for exact Set Includes Part No. 52-229-213 $ 44 repetitive readings. Mitutoyo Part No. Reg Reg. Net Price $193.46 164 • Clear graduations Range Grad. No. Remarks 1-808- Net Price SALE! on satin-chrome finish. 0-1" .0001" 103135 Friction • Positive locking clamp. 1-2 .0001 103136 Thimble Ratchet -103922 $459.00 $390.15 Supplied with a 2-3 .0001 103217 Stop w/ Electronic Depth fitted carrying case. Standard Micrometer Individual Outside Series 103 Part No. Inch Micrometer 54-225-456 FEATURES: Reg. Net • Range: 0-1" FEATURES: Price $310.50 • Graduation: .0001" • Large LCD display. • Remarks: Friction Thimble. • Direct RS232 output. $ 93 • Carbide faces. • Rod Diameter: 0.176" 263 • Positive locking clamp. Part No. 1-808-103135 • Automatic switch OFF. • Friction thimble for exact Reg. Net Price $134.00 • Range: 0-6" (0-150mm) repetitive readings. • Resolution: .00005" (.001mm) • Baked-enamel-finished frame. $ 90 • Protected to IP54 Standards. • Complete with fitted carrying case. 113 • 4" Base: Hardened tool steel, • Clear graduations on satin-chrome finish. precision ground & microlapped. • Uses (1) SR44 battery.

Depth Micrometers 6 Pc. Telescoping Series 129 - Interchangeable Gage Set Rod Type

FEATURES: • Satin chrome finish. Supplied • Plungers are locked with at any desired setting. fitted case. • Measures the true size of holes, slots, & recesses from 5/16"-6". FEATURES: • Contact ends are hardened and • Satin-chromed .157" diameter interchangeable rods, with radius ground providing clearance finished throughout. lapped measuring end, are calibrated and for insertion into a smaller hole. • Ratchet stop for consistent & tested at the factory. Rods are adjustable • Locking mechanism consists of a repetitive measurements. length, to compensate wear on the measuring tip, with 2 supplied wrenches. knurled screw at the end of the handle. • Crisp, clear graduations • Contact plungers automatically self on the thimble. center at all times and in all positions.

Base Part No. Reg. Range: 5/16" to 6" Range Grad. Length Remarks 1-808- Net Price SALE! Part No. 1-804-508 w/ Interchangeable -129131 $257.00 $218.45 $ 65 0-4" .001" 2.5" Rods: 4 pcs. Reg. Net Price $157.23 133 w/ Interchangeable 0-6 .001 2.5 Rods: 6 pcs. -129132 290.00 246.50

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 21 TOOLROOM ACCESSORIES Industrial FEATURES: • Steel screw, swivel and handle. C-Clamps • Drop-forged steel frame. Horizontal Manufacturers of • Conform to U.S. Gov’t specs. Quality "C" Clamps! • Copper plated screw. Clamp

Throat Screw Approx. Part No. Reg. Capacity Depth Dia. Wgt. (lbs.) 1-532- Net Price SALE! 0-2" 2" 1/2" 1-1/4 -402 $44.00 $37.40 0-3 2-3/8 1/2 2 -403 55.44 47.12 0-4 2-3/4 3/4 3-1/2 -404 71.07 60.41 0-6 3-5/8 3/4 5 -406 90.60 77.01 0-8 4-1/2 3/4 7 -408 133.73 113.67 SUPPLIED WITH SPINDLE ASSEMBLY. High Visibility Safety Clamps FEATURES: • Most suitable for holding down sheet metal or circuit boards. FEATURES: Series 400CS • Many spindle bar and base combination • Drop forged frame c-clamp with an anti-spatter, copper available to suit your application. Regular Duty plated spindle, swivel pad, and cross-pin handle. Extra Deep Throat • Acme roll spindle threads provide user Height Holding Drop Forged with maximum strength and clamping force. Under Overall Capacity Part No. Reg. Base Length (lbs.) 1-990- Net Price NOW! Throat Spindle Min. Proof Ship Wgt. Part No. Reg. Capacity Depth Diameter Test (lbs.) (lbs.) 1-550- Net Price SALE! 5/16" 3-1/16" 60 -201* $9.25 $7.86 3/8 3-3/16 60 -201A** 9.25 7.86 0 - 2" 2" 1/2" 3,500 1-1/2 -H402CS $24.30 $20.66 1 5-7/16 200 -201B* 12.61 10.72 0 - 3 2-3/8 5/8 3,500 1-3/4 -H403CS 34.08 28.97 1-3/8 6-19/32 500 -225D* 15.62 13.28 0 - 4 2-3/4 3/4 6,500 2-3/4 -H404CS 46.48 39.51 1-3/4 10-3/8 750 -20235* 22.93 19.49 0 - 6 3-5/8 3/4 6,900 4-3/4 -H406CS 72.83 61.91 0 - 8 4-1/2 3/4 6,900 8-1/2 -H408CS 91.43 77.72 * U-Bar, Flanged Base ** Fixed Bar, Flanged Base 0 - 10 5-3/8 7/8 8,000 10-1/2 -H4010CS 128.77 109.45 0 - 12 5-3/4 7/8 9,500 14 -H4012CS 210.78 179.16

This handy shim stock comes ready packaged in dispenser cartons for easy use. Packaged Shim Saves time, waste, and bother. Precision-gauged for accuracy. Stock 15 Pc. 6" x 12" 6" x 100" Brass Rolls Packaged Part No. Reg. Shim Stock Thickness 1-953- Net Price NOW! .001" -S1 $28.90 $24.57 Brass Shim Stock .0015 -S1X 29.05 24.69 Sizes (1 Each): .001", .0015", .002", .002 -S2 30.00 25.50 .003", .004", .005", .006", .007", .008", .003 -S3 31.00 26.35 .004 -S4 32.60 27.71 .010", .012", .015", .020", .025", .031" .005 -S5 33.80 28.73 Part No. 1-953-SF15 $ 83 .006 -S6 34.75 29.54 Reg. Net Price $79.80 .007 -S7 36.40 30.94 67 .008 -S8 38.40 32.64 .009 -S9 41.25 35.06 Steel Shim Stock .010 -S10 44.95 38.21 Sizes (1 Each): .001", .0015", .002", .003", .004", .012 -S12 48.65 41.35 A half hard, cold rolled, .005", .006", .007", .008", .010", .012", .015", .015 -S15 56.20 47.77 .020 -S20 63.40 53.89 260 Alloy Branded™ shim. Part No. 1-955-AF15 $ 51 .025 -S25 75.85 64.47 Reg. Net Price $57.07 48 More Info. @ KBCTools.com .031 -S31 89.70 76.25 More Info. @ KBCTools.com

FEATURES: 0-1 Oil Hardening • Thickness: ±.001" • Width: + .000/.005" Precision • Soft, ready to machine. • Quality oil hardening, non-distorting alloy steel. Ground Nominal Analysis Carbon ...... 90 18" Part No. 36" Part No. 1-951- 1-965- Flatstock FOR KBC’S EXTENSIVE LISTING OF Chromium ...... 50 Part FLAT STOCK VISIT: KBCTOOLS.COM Manganese .... 1.20 Thickness Width No. ONLY! ONLY! Packed Individually. Tungsten ...... 50 5/16" -256 $29.10 $57.10 Vanadium ...... 20 1/2 -258 27.88 53.94 3/4 -260 33.82 64.36 18" Part No. 36" Part No. 1 -262 39.56 74.70 1-951- 1-965- 18" Part No. 36" Part No. 5/16" 1-1/4 -264 44.92 84.16 Part 1-951- 1-965- 1-1/2 -266 50.76 94.66 Thickness Width No. ONLY! ONLY! Part 2 -268 62.34 115.28 3/8" -638 $17.10 $49.01 Thickness Width No. ONLY! ONLY! 2-1/2 -270 73.98 135.98 1/2 -054 10.72 21.02 3/16" -168 $28.08 $76.56 3 -272 85.60 156.56 3/4 -056 13.70 26.70 1/2 -170 20.54 38.38 3/8" -286 34.48 67.24 1 -058 16.46 32.12 3/4 -172 24.00 46.06 1/2 -288 31.78 61.44 1-1/4 -060 19.30 37.42 1 -174 28.32 53.94 3/4 -290 38.44 73.28 1-1/2 -062 22.12 43.12 1-1/4 -176 28.62 61.36 1 -292 44.92 84.98 1/16" 2 -064 27.88 53.96 3/16" 1-1/2 -178 36.68 69.18 1-1/4 -294 50.96 95.68 2-1/2 -066 33.56 64.94 2 -180 45.32 85.00 1-1/2 -296 57.60 107.44 3 -068 39.30 75.78 2-1/2 -182 53.88 100.54 3/8" 2 -298 70.76 130.86 3-1/2 -070 45.04 86.92 3 -184 62.58 116.32 2-1/2 -300 83.76 154.10 4 -072 50.68 97.66 3-1/2 -186 71.28 132.16 3 -302 96.90 177.46 5 -076 62.10 119.58 4 -188 79.90 147.74 3-1/2 -304 109.98 200.98 6 -078 111.72 141.56 1/4" -226 26.78 52.86 4 -306 123.04 224.30 1/8" -110 31.28 62.70 1/2 -228 23.24 45.10 5 -310 149.22 270.92 1/2 -112 14.60 28.64 3/4 -230 28.12 53.78 6 -312 175.36 317.76 3/4 -114 18.20 35.10 1 -232 33.12 62.68 1/2" -344 39.88 76.92 1 -116 21.60 41.60 1-1/4 -234 37.60 70.70 3/4 -346 48.02 91.30 1-1/4 -118 24.76 47.64 1-1/2 -236 42.76 79.66 1 -348 56.04 105.62 1-1/2 -120 28.32 54.04 2 -238 52.34 97.28 1-1/4 -350 63.98 119.50 1/8" 2 -122 35.30 66.96 1/4" 2-1/2 -240 62.10 114.76 1-1/2 -352 72.06 133.80 2-1/2 -124 42.16 79.70 3 -242 71.90 132.30 1/2" 2 -354 88.24 162.48 3 -126 49.08 92.58 3-1/2 -244 81.64 149.94 2-1/2 -356 103.80 191.22 4 -130 62.88 118.32 4 -246 91.40 167.50 3 -358 121.08 220.02 5 -134 76.72 143.94 5 -250 110.96 202.62 3-1/2 -360 136.86 248.58 6 -136 90.58 169.64 6 -252 130.52 247.42 4 -362 153.08 277.44

22 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com TOOLROOM ACCESSORIES One-Handed Machinist Part No. 52-104-025 EZS Clamps Jack Set Reg. Net Price $26.33 $ 38 Throat Depth 3-1/2" 22 FEATURES: FEATURES: • Set consists of 2 machinist jacks • Single-handed clamping and supplied in a shop hardened case. spreading of workpieces with • Individual jacks consist of a heavy, up to 445 lbs. clamping force. steel cast base with adjustable steel • EZS extend throat depth right screw and tilting swivel head, with to the outside edge of the pads - a lock nut for permanent positioning. power spread across the entire pad. • 1-1/2" jack base for added stability. • The upper section can • Range: Min: 3", Max: 4" quickly convert from clamping • Lifting capacity: 1,000 lbs. to spreading without tools. • Ergonomic handle positioned behind the rail, enabling a powerful grip. • Soft pressure caps optimize material protection and secure clamping.

Approx. T-Slot Toe Clamping Weight Part No. Reg. Capacity Spreading (lbs.) 1-820B- Net Price NOW! Clamp 6" 6-1/2" - 14" 1.20 -EZS15 $32.40 $27.54 1.12 12 6-1/2 - 20 1.80 -EZS30 35.57 30.23 1.00 18 6-1/2 - 25-3/4 2.00 -EZS45 40.40 34.34 24 6-1/2 - 31-3/4 2.30 -EZS60 45.26 38.47 .62 36 6-1/2 - 43-1/2 2.50 -EZS90 53.35 45.35 .38

1.94 FEATURES: ® Great for Machinists, • Low profile cam action Machinist Calc Pro 2 Tool & Die Makers, clamp with positive downforce. Advanced Machining Setters, Supervisors, • Clamp is mounted in the T-Slots Math + Materials and Shop Owners. of machine tables by sliding the T-Slot Part No. Reg. clamp to the workpiece and Size 1-904- Net Price NOW! tightening the locking screw. 9/16 -24128 $62.31 $52.96 FEATURES: • Two Clamping Edges: 5/8 -24148 62.31 52.96 • For face, end or slot milling - Smooth for Machined Surfaces 11/16 -24168 62.31 52.96 plus turning, drilling, and boring. - Serrated for Rough Cut Material 3/4 -24188 65.95 56.06 • Includes materials and tool settings combined with DOC & WOC to solve all your speed and feed calculations. • It gives you step-saving drill and thread T-Slot A B chart look-ups, right triangle solutions, bolt-circle patterns, a larger 2-line Nuts LCD display, and much more. C • Portable, rugged, and cost-effective Last thread is incomplete to prevent D handheld calculator. stud from turning through bottom of nut into machine table. T-Slot Nuts INCLUDES: are undersized to fit machine table slot. F E • Armadillo gear protective hard case. • Long-life battery (CR2025). Table • Quick Reference Guide and Ref. No Thread Slot Part No. Easy-to-Follow User’s Guide. TN A B C D E F 1-903- ONLY! CASE 437 3/8-16 7/16" 1/2" 7/32" 11/16" 7/8" -41404 $3.28 HARDENED Model 4088 500 3/8-16 1/2 1/2 9/32 7/8 7/8 -41405 3.28 Part No. 1-961-004 562 3/8-16 9/16 5/8 11/32 7/8 1-1/8 -41406 3.63 BLACK $ 71 563 1/2-13 9/16 5/8 11/32 7/8 1-1/8 -41409 3.96 OXIDE Reg. Net Price $154.95 131 625 1/2-13 5/8 5/8 11/32 1 1-1/8 -41410 4.04 FINISH 626 1/2-13 5/8 3/4 3/8 1-1/8 1-1/8 -41411 5.48 687 1/2-13 11/16 3/4 7/16 1-1/8 1-1/4 -41412 4.61 Machinery’s Handbook 30th Edition T-Slot TABLE OF CONTENTS: • Tooling & Toolmaking Bolts • Mathematics • Machining Operations FEATURES: • Mechanics & • Manufacturing Processes C • Medium Strength of Materials • Fasteners A F carbon steel. • Properties, Treatment, • Threads & Threading • Threads Class & Testing of Materials • Gears, Splines, & Cams E 2A UNC. • Dimensioning, • Machine Elements G • Black finish. Gaging, & Measuring • Measuring Units L D

Toolbox Edition (4.6" x 7") Thread Length Table Part No. Reg. Part No. 1-961-05530 Size A L Slot C D E F G 1-903- Net Price SALE! $ 82 1-1/2" 1/2" -45203 $7.35 $6.25 Reg. Net Price $170.42 127 2 3/4 -45205 7.49 6.37 2-1/2 1 -45207 7.92 6.73 Large Print (7" x 10") 3 1-1/8 -45209 8.19 6.96 3/8"-16 3-1/2 3/8" 3/8" 3/16" 11/16" 13/16" 1-1/4 -45210 8.60 7.31 Part No. 1-961-06530 $ 07 4 1-1/4 -45211 8.87 7.54 Reg. Net Price $201.42 4-1/2 1-1/4 -45212 9.20 7.82 151 5 1-1/4 -45213 9.60 8.16 5-1/2 1-1/4 -45214 10.04 8.53 For more than 100 years. Machinery's 6 1-1/4 -45215 10.09 8.58 Handbook has been the most popular reference 1-1/2 1/2 -45402 8.76 7.45 work in metalworking, design, engineering and 2 3/4 -45404 9.03 7.68 manufacturing facilities, and technical schools and colleges 2-1/2 1 -45406 9.60 8.16 through-out the world. The 30th edition of the "Bible of the Metal 3 1-1/8 -45408 10.04 8.53 1/2"-13 3-1/2 1/2" 9/16" 1/4" 7/8" 1-3/16" 1-3/8 -45409 10.63 9.04 Working Industries" contains major revisions of existing content, 4 1-1/2 -45410 11.04 9.38 as well as new material on a variety of topics. It is the essential 4-1/2 1-1/2 -45411 11.42 9.71 reference for mechanical, manufacturing, and industrial engineers, 5 1-1/2 -45412 11.50 9.78 designers, draftsmen, toolmakers, machinists, engineering and 5-1/2 1-1/2 -45413 11.69 9.94 technology students, and the serious home hobbyist. 2,896 pp. 6 1-1/2 -45414 12.18 10.35

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 23 MACHINERY Heavy-Duty Step Pulley 13" Drill Drill Presses Presses With Dual Laser Palmgren’s heavy duty 16-speed drill presses Guide System are designed and built for drilling a wide array of materials.They have the weight and rigidity to maintain the built-in tight tolerances required for FEATURES: metalworking applications. The oversized, massive • 5/8" drill chuck drill heads have widely spaced bearing surfaces that and key included. provide full quill support throughout its travel. • 45° tilting table A wider rangeof operation speeds for drilling for angular drilling. both large and small holes. • Cast-iron pulleys reduce vibrations. • Comes with non-slip FEATURES: rubber feed handles. • Maximum spindle run out of 0.0005". • Light socket incorporated • Rack and pinion table raiser. into drill press head. • Heavy cast metal 3 spoke quill feed • Spindle is supported by handle with ergonomic speed feed handle. high quality ball bearings. • LED readout of spindle speed and quill travel. • Locking depth stop for • Front mounted industrial paddle-type power switch. repetitive blind hold drilling. • Precision ground t-slotted work table with coolant trough. • Fully enclosed spindle for accurate drilling operations. • Extended quill/spindle travel ideal for deep hole applications. Model KC-116N • Table tilts 45O right and left and rotates 360O around the column. Part No. 6-125-020 • Quick change vertical depth stop for accurate, repeatable feed length. • Includes chuck with key and arbor. $ 99 329 full 17" Model 80177 20" Model 80209 Year Part No. 1-549-80177 Part No. 1-549-80209 Model KC-116FN 2 Part No. 6-125-021 Warranty $ 70 $ 50 1,726 2,402 $37999 SPECIFICATIONS: Model 80177 Model 80209 SPECIFICATIONS: KC-116C KC-116FC Swing ...... 17"...... 20" Swing ...... 13" ...... 13" Spindle Travel ...... 5"...... 5" Spindle Travel ...... 3-1/8" ...... 3-1/8" Spindle Taper ...... 2 MT...... 3 MT" Spindle Taper ...... 2 MT ...... 2 MT Table Size ...... 14-3/8" x 14-3/8"...... 19-1/4" x 18-3/4" Table Size (Round) ...... 12-13/16" ...... 12-13/16" Speed Range (16) ...... 138-3,476 RPM ...... 120-3,605 RPM Speed Range (16) ...... 210-3,670 RPM ...... 210-3,670 RPM Motor ...... 1 HP, 120/240V, 1 PH...... 1-1/2 HP, 120/240V, 1 PH Motor ...... 1/2 HP, 115V, 1 PH ..... 1/2 HP, 115V, 1 PH Shipping Weight ...... 216 lbs...... 352 lbs. Shipping Weight ...... 145 lbs...... 175 lbs.

Milling Drilling full 10" x 54" CNC Vertical Machine Year Milling Machine W2arranty With 3-Axis Acu-Rite G2 CNC Control

SPECIFICATIONS: FEATURES: Swing ...... 16-1/2" Model • 10" x 54" hardened and • Acu-Rite G2 CNC control is Drilling Capacity ...... 1-1/4" ground table with precision easy to learn & simple to use. Max. Spindle Nose to Table ...... 18-7/8" PDM-30 Part No. hardened ground ways. • Reliable mechanical V.S. Spindle Taper / Stroke...... R8 / 5" • Control features canned cycles Mill head delivers full torque Diameter of Column...... 4-3/4" 6-125-030 for all regular milling and drilling over entire speed range. Speed Range (12) ...... 150-2,500 RPM $ 00 jobs, just fill-in the blanks to • Heavy-duty box ways on Face Mill / End Mill Capacity ...... 3" / 3/4" 2,299 complete a program. knee and column with extra Max. Longitudinal Travel ...... 17" wide saddle for added rigidity. Cross Travel ...... 7-1/4" • 3 HP, 3 PH Motor Working Area of Table ...... 8-1/4" x 28-3/4" • Shipping Weight: 3,200 lbs. Size of T-Slot on Table ...... 5/8" Motor...... 11 Amp @ 220V Voltage / Pre-Wired.... 220V, 1 PH, 60 Hz. / 220V Dimensions (L x W x H) ...... 43" x 39" x 42" Shipping Weight ...... 675 lbs. Optional Floor Stand $ 99 More Information Available @ KBCTools.com Part No. 6-125-030S 279

Variable Speed Bench Mill PRICE REDUCED With Digital Spindle Speed Indicator SAVE $ FEATURES: 2,500! • Variable spindle speeds with Was $43,495.00 digital spindle speed indicator. • Four heavy-duty taper roller bearings. • Micrometer dials graduated in .001" increments. Model COMPLETE WITH: Model KC-20VS KBC-3VS-G23 • 1/2" Chuck. Part No. 6-125-035 (230V) Part No. • Safety Guard. MODEL • R8 Chuck Arbor. $ 00 full TUM-3VS 6-265-006-G23 1,999 Year Shown with (575V) Part No. SPECIFICATIONS: 2 Newall 6-265-006C-G23 Swing ...... 13" Warranty DP-500 Drilling Cap. (cast-iron/steel) .... 3/4" / 5/8" and KBC $ 00 Max. Spindle Nose to Table ...... 13" Table Feed. 40,995 Spindle Taper / Stroke ...... R8 / 2" FINANCE AS LOW AS Speed Range (Var. 2) ...... 50-1,125 / 100-2,250 RPM/tr/min $874.42/mo. Motor / Voltage ...... 1 HP, 110V, 1 PH 1 Year warranty from Acu-Rite CALL FOR DETAILS Max. Travel ...... 18-7/8" x 6-7/8" on the G2 CNC control system. Shipping Weight ...... 285 lbs. 1 Year parts replacement warranty on machine.

24 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com MACHINERY 10" Bench Drill Press 21" Gear Head Heavy-Duty Palmgren's practical light to medium duty drilling machine 28" Variable Drill/Mill Machine combines performance and Speed Gear economy into one. It's an ideal FEATURES: choice when working with metal, Head Drill • Heavy-duty t-slot work composite, plastic, or wood. table with coolant trough. Designed for general Press • Rapid and fine manually purpose intermittent use. operated quill feeds. FEATURES: • 2-speed instant reversing FEATURES: • Heavy-duty t-slot work motor for tapping. • Durable cast iron table with coolant through • Four heavy-duty head, table, and base. and built-in coolant system. tapered roller bearings. • Spindle supported by high • Power quill feeds • Gear head direct- quality ball bearings and disengages at drive of spindle. has a spindle depth stop. preset depth. • Rack and pinion table raiser. Table tilts 45O to the right and Model KC50 Model left while being able to swivel Part No. 6-125-025C KC-40HC 360O around the column. (220V, 1PH) • Laser alignment. $ 00 Part No. 6-125-024 • Front mounted safety, 5,299 paddle on/off switch. FINANCE AS LOW AS (575V, 3PH) Part No. 6-125-024C • Drill chuck & key included. $119.70/mo. CALL FOR DETAILS $ 00 Model 80110 4,999 Part No. 1-549-80110 full FINANCE AS LOW AS full $ 35 Year $119.15/mo. Year CALL FOR DETAILS 336 2Warranty 2Warranty SPECIFICATIONS: Swing ...... 10" SPECIFICATIONS: SPECIFICATIONS: Capacity Cast Iron ...... 1/2" Swing ...... 27-1/2" Swing ...... 20-7/16" Spindle Travel ...... 2-1/2" Drilling Capacity...... 1-1/2" Drilling Capacity...... 1-1/4" Spindle Taper...... JT #33 Spindle Taper / Travel ...... 4 MT / 7" Spindle Taper / Travel ...... R8 / 5" Table Size ...... 7-13/16" x 7-13/16" Table Size ...... 22" x 22" Table Size ...... 23" x 7-1/2" Table Slots ...... 1/2" x 4-11/16" Speed Range (Var. 2) ...... 60-1,870 / 120-1,740 RPM Speed Range (6) ...... 60-1,500 RPM Speed Range (5)...... 620-3,100 RPM Spindle to Table ...... 26" Spindle to Table ...... Up to 26-1/2" Motor...... 1/3 HP, 115V, 6.8 Amps Motor...... 2 HP, 575V, 3 PH Motor ...... 1-1/2 HP, 575V, 3 PH Weight...... 50 lbs. Shipping Weight ...... 1,310 lbs. Diameter of Column...... 4-1/2" Shipping Weight ...... 690 lbs.

with Purchase 9" x 49" Turret FREE of any KBC Milling Machines 3 HP Variable Mill / DRO Speed Head! TOOLING Package

• 13 Pc. Collet Set (1-519-020) SPECIFICATIONS: • 52 Pc. Clamp Kit (1-904-20402) Table Size ...... 9" x 49" • 10 Pc. End Mill Set (5-300T-050) $314.57 Value! Longitudinal Travel Manual Model ...... 35" Longitudinal Travel w/Power Feed ...... 31" Cross Travel / Knee Travel ...... 12" / 16" SPECIFICATIONS: TUM-3VS TUM-40VS Table To Spindle min-max...... 0-18-3/4" 10" x 54" Table Size ...... 10" x 54" ...... 10" x 54" Spindle To Column at 90°..... 6-3/4"-18-3/4" Heavy-Duty Longitudinal Travel Manual ...... 32" ...... 32" Spindle Speed (Var.) ...... 70-4,200 RPM with Power Feed ...... 28" ...... 28" Spindle Taper ...... R8 Milling Machines Cross/Knee Travel ...... 16"/16" ...... 16"/16" Power Quill Feeds Spindle Speeds ...... 70-4,200 RPM ...... 70-4,200 RPM (per rev.) ...... 0017"/.0032"/.0053" Spindle Taper ...... R8 ...... NST40 Quill Travel ...... 5" Quill Travel ...... 5" ...... 5" Shown Spindle Motor Motor...... 3 HP, 3 PH ...... 5 HP, 3 PH with Newall Step Pulley . 3 HP, 230V or 575V, 3 PH Voltage ...... 230/460V or 575V ..... 230/460V or 575V DP-500 Shipping Weight ...... 2,700 lbs. Shipping Weight ...... 3,500 lbs...... 3,500 lbs. & KBC Table Feed Model Complete with TUM-1VS NMS-300 (230V, 3 PH) 2-Axis Digital Readout Part No. 6-265-007 & Table Feed (575V, 3 PH) INSTALLED! Part No. 6-265-007C (230V, 3 PH) $ 00 Model TUM-3VS Part No. 6-265-006-N3 (230V, 3 PH) Part No. 6-265-006 10,995 (575V, 3 PH) FINANCE AS LOW AS (575V, 3 PH) Part No. 6-265-006C Part No. 6-265-006C-N3 $241.88/mo. $ 00 $ 00 CALL FOR DETAILS 12,495 14,250 FINANCE AS LOW AS FINANCE AS LOW AS (230V, 3 PH) $274.88/mo. $313.49/mo. Part No. 6-265-007-N3 (230V, 3 PH) Complete (575V, 3 PH) Model TUM-40VS Part No. 6-265-009-N3 with Part No. 6-265-007C-N3 (230V, 3 PH) Part No. 6-265-009 (575V, 3 PH) $12,99500 (575V, 3 PH) Part No. 6-265-009C Part No. 6-265-009C-N3 NMS-300 2-Axis Digital FINANCE AS LOW AS $ 00 $ 00 Readout & Table Feed 13,995 15,750 $285.88/mo. FINANCE AS LOW AS FINANCE AS LOW AS INSTALLED! CALL FOR DETAILS $307.88/mo. $343.04/mo. CALL FOR DETAILS CALL FOR DETAILS

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 25 MACHINERY 12" Slow Speed 12" Blade Cold Cut Saw Not Included. FEATURES: • Powerful 4.5 HP motor, wired 220V, 1 PH • Quick action clamping vice secures workpiece. 14-1/2" Capacity • Control handle with integrated safety trigger. • Low 52 RPM blade speed is Gravity Feed ideal for cutting ferrous metals. • Mitering head pivots to the right Vertical Saw or left positive stops at 45˚ & 90˚. Model EF-1459 Model KC-315CS Part No. 6-398-005 Part No. 6-125-036 $ 00 $ 00 full 8,295 2,799 Year FINANCE AS LOW AS W2arranty $187.38/mo. SPECIFICATIONS: CALL FOR DETAILS Cutting Capacity Solid Round...... 2-3/8" / 2" FEATURES: Hollow Round ...... 4" / 3-1/2" • 1 HP, 230V,1 PH motor. Square .... 3-1/4" / 3-1/4" / 3" x 3" • Accepts blades from Spindle Speed ...... 52 RPM 1/4"-3/4" wide. Max. Vise Opening ...... 4-3/4" • Speeds (4): 70-525 SFPM Shipping Weight ...... 385 lbs. • Accurate gravity feed with hydraulic speed control and depth stop. Model KM-1200 COMPLETE WITH: • Rugged simple construction Optional 12" Cold • Sider Roller for easy maintenance Cut Saw Blade • Anti-Splash Guards and long service life. Part No. • Coolant System • Shipping Weight: 700 lbs. $ 00 • Workshop Assembly 6-125-KM1200 299 17" Variable Speed Metal/Wood Cutting Automatic Cycle Bandsaw Bandsaws FEATURES: • (2) 4" dust chute for dust collector hook-up. • Variable frequency drive speed control and digital display for blade speed in feet/min. • Solid cast-iron table tilts 5o left/45o right. COMPLETE WITH: • 1/2" x 6 TPI Wood Cutting Blade. • 1/2" x 10 TPI Metal Cutting Blade. Model BS-12A • Laser Guide. (12" Round Cap.) • Work Lamp. (230/460V, 3PH) • Miter Gauge. Part No. 6-275-007 • Precision "TRU-RIP" Aluminum Rip Fence with Resaw Guide. (575V, 3PH) MODEL Part No. 6-275-007C BS-15A SHOWN Model $ 00 KC-1700WM-VS 16,750 Part No. 6-125-169 FINANCE AS LOW AS FINANCE AS LOW AS $ 00 $90.55/mo. $364.82/mo. 3,799 CALL FOR DETAILS CALL FOR DETAILS FEATURES: • Cast iron construction. SPECIFICATIONS: Model BS-15A (15" Round Cap.) • Full auto cycle. Cutting Capacity • 3 HP drive motor. Frame to Blade ...... 16-1/4" (230/460V, 3PH) Part No. 6-275-009 • 1" Bi-metal blade. Table Size ...... 23-1/2" x 17" (575V, 3PH) Part No. 6-275-009C • Net Weight: Blade Size ...... 131-5/8" x (1/8"-1") x .025" 1,800 or 2,200 lbs. Height to Cut...... 12" $ 00 • Shipping Weight: Motor ...... 2 HP, 220V, 3 PH, 7 Amp 2,000 or 2,500 lbs. Voltage (input power) .... 220V, 1 PH, 60 Hz 19,895 full Speeds (Variable) FINANCE AS LOW AS Year Wood ...... 540-3,600 SFPM $433.31/mo. 2 Metal ...... 100-650 SFPM CALL FOR DETAILS Warranty Weight ...... 440 lbs.

7" x 12" Horizontal Bandsaw

Ideal saw for machine, maintenance and fabricating shops and for limited run production applications. Heavy-duty rigid steel and cast iron construction of the saw Model 83311 head and base provide full blade support and eliminates vibration and deflection. Part No. 1-549-83311 FEATURES: $ 50 • Step pulley drive train with 4 speed 2,123 settings to cover all your sawing applications. • Gear box utilizes a bronze worm gear and SPECIFICATIONS: hardened worm shaft running in an oil bath. Capacity at 45° • Adjustable ball bearing blade guides delivers straight accurate cuts. Rectangle...... 7" x 11-3/4" • Adjustable hydraulic down feed of the saw head. Round...... 7" • Flood coolant system cools and cleans chips from the blade. Square...... 7" • Castors for easy positioning of the saw anywhere in the shop. Speeds (4)..... 96/132/178/260 FPM • Automatic shut off at end of cut. Motor...... 1 HP, 120/240V, 1 PH • Chip brush and rapid acting vise. Blade Size ...... 3/4" x 0.035" x 93" • Adjustable material work stop. Weight...... 330 lbs.

26 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com MACHINERY Jaws 55 Ton Punch Pressure Ironworker Universal Box & Pan Brake with Stand Hydraulic powered TENNSMITH hand brake provides an punching capacity economical means of performing a wide with open tooling range of sheet metal bending and forming station, built-in operations. It is made of all steel welded stations for shearing construction with truss rods for easy plate and angle iron. adjustment, bronze bushings which reduce wear and plastic clamp handle grips. Model 55T F.O.B. FACTORY — TENNESSEE (5 HP, 230V, 3 PH) Part No. 6-700-215 SPECIFICATIONS: Capacity, Mild Steel ...... 16 GA. Price Includes Stand! $ 45 Bending Length ...... 48-1/4" 17,513 Maximum Depth Of Body ...... 4" FINANCE AS LOW AS Maximum Lift Of Beam ...... 1-1/4" Model HBU48-16 $381.43 /mo. Front To Rear Beam Adjustment ...... 5/8" Part No. 6-700-040 CALL FOR DETAILS Minimum Reverse Bend ...... 1/4" Min. Flange In Cap. Material ...... 1" $ 00 (5 HP, 575V, 3 PH) Finger Widths ...... 2, 3 & 4" 2,695 Part No. Shipping Weight...... 580 lbs. 6-700-215C $18,59845 FINANCE AS LOW AS Call us for punches & dies and all 16 Gauge Foot $405.06/mo. the other available accessories CALL FOR DETAILS for these versatile machines. Squaring Metal Shear F.O.B. FACTORY — TENNESSEE SPECIFICATIONS: Max. Capacity...... 1-3/8" Dia. -1/2" Plate SPECIFICATIONS: Largest Standard Punch/Die ...... 1-1/16"/1-1/4" Max. Shearing Capacity, Mild Steel ...... 16 GA. Bar Shear Rounds/Squares ...... 1-1/8" Max. Shearing Capacity, Stainless Steel ... 20 GA. Flat Max. Thickness ...... 3/4" x 4" Maximum Cutting Length ...... 52-1/4" Flat Max. Width ...... 1/2" x 12-3/8" x 14" Back Gauge Range ...... 30" Angle Shear Max. Size ...... 3" x 3" x 3/8" Front Gauge Range ...... 37" Model 52 Shipping Weight ...... 2,100 lbs. Floor Space, Gauges in Position ...... 60" x 80" Part No. 6-700-010 Overall Dimensions, Less Gauges, L x W x H ...... 61" x 36" x 42" $ 00 Shipping Weight ...... 1,100 lbs. 4,495

9" Disc & 6" x 48" Belt 12" Disc & full 6"x 48" Belt 2 Year Combination Finishing Machine Warranty Grind, sand, finish, polish, deburr, and Combination Sander contour all types of materials and parts! With Built-In Dust Collector The direct drive powertrain with a heavy-duty capacitor motor allows the units to work under FEATURES: load without slowing or bogging down. • Powerful 1-1/2 HP, 220V motor. • Two Step activation safety switch with line FEATURES: voltage interruption in case of power failure. • Belt operates in the horizontal or vertical position • Heavy-duty cast iron tilting tables and body. and is designed for fast, easy belt changes. • Sanding belt operates vertically, horizontally • Both the belt and disc come with a tilting or at any set angle in between. work table. The disc table is slotted to • Belt and disc safety guards. accept the standard miter gauge. • Quick-release lever for • Cast base for maximum rigidity. easy belt replacement. Model 81093 Model KC-790FX-DC Part No. Part No. 6-125-006-DC 1-549-81093 $1,69900 $1,04625 SPECIFICATIONS: Belt Speed...... 2,250 SFPM SPECIFICATIONS: Disc Speed ...... 1,750 RPM Belt Speed...... 2,700 SFPM Motor...... 1-1/2 HP, 220V, 1 PH Disc Speed ...... 3,450 RPM Dust Collector Motor...... 1/4 HP, 2/1 Amp Motor...... 1 HP, 120/240V Overall Dimensions..... 35" x 25" x 56-1/4" Weight...... 117 lbs. Shipping Weight...... 280 lbs.

Belt Grinders Model 82401 Palmgren's belt grinders are ideal power tools for all shops. FEATURES: Part No. 1-549-82401 These versatile machines grind, • Belt is adjustable for use in either the vertical or sand, finish, polish, deburr, and horizontal position or any position in-between. $ 00 contour all types of parts on • Front mounted on/off paddle switch. 403 any type of material. Built with • Simple belt tensioning and adjustment. a powerful capacitor motor for • Full belt guard and dust collection port. Model 82404 all day use, every day. SPECIFICATIONS: 82401 82404 Part No. Belt Size...... 1" x 42"...... 4" x 36" 1-549-82404 Belt Speed ...... 1,800 SFPM...... 3,615 SFPM Motor...... 1/2 HP, 120/220V...... 3/4 HP, 120/240V $ 50 Shipping Weight...... 52 lbs...... 64 lbs. 883

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 27 MACHINERY

12" x 36" Gearhead Metal Lathe 14" x 40" 1.5 HP, 220V, 1 PH Motor Gearhead FEATURES: Metal Lathe • Line interruption switch system 2 HP, 240V, 1 PH Motor needs a restart after a power failure. • Guideway and gears in headstock are all hardened and precision ground. FEATURES: • Safety guard with limit switch protection. • Line interruption switch • Complete with 6" 3-jaw chuck, 8" 4-jaw system needs a restart chuck, imperial & metric gears, quick-change after a power failure. tool post, steady rest, follow rest, 10" DI-4 • Guideway and gears in camlock face plate, thread chasing dial headstock are all hardened indicator, 3 MT dead center, 3 MT arbor and precision ground. taper, 1/2" drill chuck, full length splash • Spindle foot brake in guard, tool box, chuck keys & hex keys. the cabinet stand for easy • Shipping Weight: 1,050 lbs. operation and reliable safety. • Safety guard with limit switch protection. full Model KC1236ML • Speeds (8): 70-2,000 RPM. FINANCE AS LOW AS full Year Part No. 6-125-063 Year • Net Weight: 1,150 lbs. 2 $ 00 $119.15mo. 2 • Shipping Weight: 1,375 lbs. Warranty 4,999 CALL FOR DETAILS Warranty

22" & 26" Swing DON'T SEE THE MACHINE YOU NEED? Large 4" Bore 16" x 40" High Engine Lathes Shop KBCTools.com or email us with your specific needs at [email protected]. Precision Toolroom Metal Lathe COMPLETE WITH: FEATURES: • 12" 3-jaw chuck. • Thread chasing dial. Complete with • 16" 4-jaw chuck. • Coolant system. • Bed ways are hardened and precision ground. • 20" Face plate. • Full-Length • Powerful 4 HP drive motor. • 8" Steady rest. splash guard. NMS-300 or DP-700 • Gearhead spindle drive • 1-3" Follow rest. • Work light. with hardened & ground gears. • 4-way tool post. • Standard tools. Digital Readout • Speeds (16): 45-1,800 RPM. INSTALLED! • 4-way power feed of apron and cross-slide. FEATURES: Part No. 6-273-067 Part No. 6-273-067-N3 • Combination inch/metric graduated dials. • 10 HP main spindle motor. Model $ 00 $ 00 • Lathe chuck safety guard automatically • Inch dials and leadscrews. shuts lathe off when lifted. KLS-2260C 27,595 29,595 • Shipping Weight: 3,250 lbs. • Clutch style headstock. FINANCE AS LOW AS FINANCE AS LOW AS • Safety foot brake. (22" x 60") • Jog button, 4-way rapid traverse. $588.60/mo. $631.26/mo. Model KC-1640ML • Centralized lube system in headstock. (230V, 3PH) Part No. 6-125-064 • Hardened and ground gears and bedways. Part No. 6-273-068 Part No. 6-273-068-N3 Model $ 00 $ 00 (575V, 3PH) Part No. 6-125-064C SPECIFICATIONS: KLS-2280C 29,195 31,895 $ 00 Swing Over Bed ...... 22" / 26" (22" x 80") FINANCE AS LOW AS FINANCE AS LOW AS 12,999 full Swing Over Cross Slide ...... 12-1/2" / 16-1/2" FINANCE AS LOW AS Swing Over Gap ...... 30" / 34" $622.73/mo. $680.32/mo. 2 Year Distance Between Centers ...... 60" / 80" / 120" $285.97/mo. Warranty Spindle Speeds...... (12) 36-1,600 RPM Model Part No. 6-273-069 Part No. 6-273-069-N CALL FOR DETAILS Spindle Nose/ Spindle Bore ...... D1-8/4.12" KLS-26120C $ 00 $ 00 Threads Standard ...... 32 (2 to 28) TPI (26" x 120") 34,995 40,995 Threads Metric Pitch ...... 22 (1 to 14) MM FINANCE AS LOW AS FINANCE AS LOW AS Tailstock Quill Travel/Taper ...... 6" / 5 MT Supplied with 17" x 40" Main Motor ...... 10 HP, 230/460V, 3 PH Newall DP-700 $746.44/mo. $874.42/mo. Shipping Weight ...... 7,900 / 8,900 / 9,180 lbs. Digital Readout CALL FOR DETAILS CALL FOR DETAILS High Precision Engine Lathe FEATURES: • Instant feed reverse on apron. • Full-length safety foot brake. • Inch dials & leadscrews. • Thread chasing dial. • Solid 1 piece cast iron base. • Hardened and ground gears and bedways. • Centralized lube system in headstock. Model ML-1740T Part No. 6-273-064 $ 00 Big 4" Spindle Bore, 26,995 Clutch Spindle Drive & FINANCE AS LOW AS 4-Way Rapid Traverse $575.80/mo. CALL FOR DETAILS

28 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com MACHINERY 10" x 20" 3-Axis Auto Feed Surface Grinder

FEATURES: COMPLETE WITH: • 10" x 20" grinding capacity. 8" x 20" Magnetic Chuck, • Automatic lubrication system. Dust-suction Coolant • 3-axis automatic movement with i and Overhead Dresser. cremental downfeed in .0001" steps. • Precision hand scrapped turcite table and saddle ways. • Rapid elevation motor for quick and easy positioning. • High column design with 19" spindle center to table. • Shipping Weight: 3,400 lbs.

Model SGS-1020AHD Model KC1440ML-2 Part No. 6-273-015 Part No. 6-125-062A $ 00 FINANCE AS LOW AS 29,495 $ 00 $158.10/mo. FINANCE AS LOW AS 6,999 CALL FOR DETAILS $629.13/mo. CALL FOR DETAILS

6" x 18" Manual Surface Grinder FEATURES: • 2 HP motor, 230V, 3 PH • Construction gives this machine exceptional rigidity. • Roller ways for smooth effortless table travel. • Ultra-high column with 21" spindle to table. • Cartridge spindle with ABEC-7 precision spindle bearings. • Double "V" saddle ways, H-frame column design and heavyweight. • Oversize spindle housing and flange mount design allows heavier grinds than with other similar size machines. • Shipping Weight: 2,500 lbs. Model KGS-618M COMPLETE WITH: COMPLETE WITH: Part No. 6-273-003 • Coolant System • Work Light • Full-Length Rear Chip Guard $ 00 • 6" x 18" Permanent • Chuck Guard • 12" 4-Jaw Chuck Magnetic Chuck • E-Stop Button • 8" 3-Jaw Chuck with 12,995 • Grinding Wheel • 4-Way Toolpost Inside & Outside Jaws FINANCE AS LOW AS • Wheel Chuck • Coolant System • Thread Dial Indicator $285.88/mo. CALL FOR DETAILS

With Chuck Guard & 2-Speed Tailstock COMPLETE WITH: • Face Plate • Steady Rest & Follow Rest • 4-Way Toolpost FREE • 10" 3-Jaw Chuck • Toolbox with Tools 5 Gallon Pail • Halogen Work Light TM • Coolant System of GRINDZAL with Full Length Pure Synthetic Rear Splash Guard Grinding Coolant • Manual & Parts List Part No. 1-123-065 SPECIFICATIONS: Swing Over Bed...... 17" with Purchase of $154.07 Swing Over Cross Slide...... 11-7/8" Value! Swing Over Gap...... 24-1/2" any Surface Grinder Center Distance...... 40" Spindle Nose/Bore... D1-6 Camlock/3-1/8" Speeds (12) ...... 36-1,800 RPM Thread Cutting Range Standard Whit-worth (45)...... 2-72 TPI DON'T SEE THE MACHINE YOU NEED? Metric Pitch (39)...... 0.2-14 mm Tailstock Taper...... 4 MT Shop KBCTools.com Tailstock Spindle Travel...... 5" or email us with Drive Motor...... 7-1/2 HP, 230/460V, 3 PH Shipping Weight ...... 4,510 lbs. your specific needs at [email protected].

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 29 SHOP SUPPLIES ® Button Thread 0

Quill Stop 1

2 THERE IN JUST

Quick Set

FEATURES: TO 3 Shield Kit • Easily installed. 2 SECONDS! • Turning the nut gives precision 4 micrometer adjustments of .001". FROM HERE KIT INCLUDES: 5 • 14" Adjustable, • Touching button lets nut slide up and down. 3/4" Loc-Line® Arm. • Releasing the push button locks the nut in place. • Magnetic Base. SHIELD YOURSELF FROM • All steel construction with engraved graduations. • Fitting for Fixed Mounting. CHIPS AND COOLANT. Part No. 1-541-QN30 $ 09 For all Bridgeport-type mills 8-1/2" x 12" or any 1/2"-20 stop rod. Quick-Set Shield Kit Reg. Net Price $56.58 48 Part No. 1-836-60527 Reg. Net Price $58.04 "THE BIB" Way Cover Set $ 24 52 For Vertical Milling Machines FEATURES: • Protect ways from chips and oil. • Easily mounted with two screws. • Made of heavy .070 oil and chip-resistant Mig Wire Neoprene rubber. Utility Pliers • Cut clean-up time. Specifically designed Part No. 1-541-400 $ 01 for use with mig welders. Reg. Net Price $92.95 79 Dimensions: 0.7" x 3.3" x 11.4" Part No. 1-701-11448 General Purpose 3" Dia. x 4’ Long $ 68 BUY A BOX Reg. Net Price $25.51 21 Maintenance Socks SAVE MORE! FEATURES: • Absorbs most non-aggressive fluids, oil or water based. ® • Highly absorbent sock for industrial maintenance. Nextera • The sock "skin" allows fluids to pass Over-the-Head Earmuff through quickly to the absorbent fill inside. Individual Socks Box of 40 The most comfortable, highest Part No. Part No. Reg. powered muff type ear protector Model 1-835- ONLY! 1-835- Net Price NOW! in the industry. Heavy weight, high band pressure and AMI-34-GP -706 $4.05 -707 $150.85 $135.77 high cost are no longer necessary to get the best. Part No. 1-700T-3006 Anti-Fatigue Reg. Net Price $38.21 Matting $ 48 DIAMOND FOOT™ Black 32 Durable vinyl surface bonded to a resilient, Ergo FlexTM closed-cell foam, provids anti-fatigue & wear characteristics. FEATURES: • Two point suspension for FEATURES: even pressure distribution. • Beveled edges for safety. • Diamond plate surface 24" x 36" (9 lbs.) • Sewn, foam filled head • 9/16" thick made from 100% Part No. 1-913-442S2436 $ 18 pad for optimal comfort. ultra-comfort foam. recycled materials. ™ Reg. Net Price $54.33 • Soft-Seal ear cushions provide • Industry favorite • Surface resists common 46 maximum acceptance & comfort. diamond plate surface fluids, most chemicals, 36" x 60" (22 lbs.) • NRR = 30, highest rated anywhere. for enhanced traction. and is non-flammable. • Tested at NVLAP accredited laboratory. Part No. 1-913-442S3660 $ 41 • Meets CSA Class AL. Limited 3 year warranty against wear & delamination. Reg. Net Price $135.78 115

NEBO SLYDETM King Rechargeable Portable Flashlight and Work Light The SLYDE KING is equipped Magnetic Base with programmable memory settings for each light mode, a new COB LIGHTING MODES red light function, a 4x adjustable zoom Run Time Viewing FEATURES: Mode Lumens (Hours) Distance • 20o beam spread. and best of all ... it's rechargeable! • 9' grounded cord and plug. Flashlight 330 2 123 M • Dust-free vinyl coated industrial FEATURES: Work Light 250 4.25 22 • Convex lens. Red Light 40 4.75 7 strength flexible gooseneck. Red Flash 40 24 7 • Metal shade with a 22" • Tactical edge. reach magnetic base. • Dimmable beam. • 6 watt, 120V LED lamp • Powerful magnetic base. • Side-positioned ON/OFF button. Part No. 1-541-6434 $ 78 produces 370 lumens. Reg. Net Price $61.98 • Push button on/off • Anodized aircraft-grade aluminum: 55 switch with rubber boot. water and impact-resistant. • Work light automatically SPECIFICATIONS: Model 7842 turns ON when opened. Length Compacted / Extended.... 6-7/8" / 9" • Includes 1 Li-ion rechargeable Diameter Barrel ...... 1-1/4" Part No. 1-541-7842 $ 39 battery (3-4 hr. rechargeable time) Diameter Head ...... 1-3/4" Reg. Net Price $181.63 154 and 1 micro USB to USB cable. Weight ...... 0.8 lbs.

30 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com SHOP SUPPLIES

® Air Guns ® Recoil For High Power Extension Part No. Reg. Air Hose FEATURES: Model No. Length 1-816G- Net Price SALE! • Venturi nozzle delivers 100% more thrust compared to 75LJ 006 AA 6" -LJ006 $44.59 $37.90 conventional air guns. 75LJ 012 AA 12" -LJ012 46.75 39.74 75LJ 018 AA 18" -LJ018 48.92 41.58 • Cleans hard to reach areas. 75LJ 024 AA 24" -LJ024 51.09 43.43 FEATURES: • Spring-type 25' x 1/4" Hose VENTURI NOZZLE SERVES 2 PURPOSES: bend restrictors Part No. 1-397-610 • (1) Main air flow speeds up as it passes • (2) Should the nozzle tip become blocked, relieve the strain through the nozzle drawing in ambient air all of the main air flow exits through the side near hose ends. $ 26 through the two side ports. The increased ports. Under these conditions static pressure • Made of lightweight nylon and 15 velocity and increased volume of air exiting the at the nozzle tip is held to less than 30 PSI, premium brass connectors swivel 360o. nozzle boosts the available thrust up to 250%. thereby satisfying OSHA safety standards. • After each use, the hose naturally springs back into its compact, coiled shape. 30' Flat Hook Tiedown Variable Speed Long Handle Ratchet

Power Table Feed FEATURES: FEATURES: • Meets all DOT, CHP, • Electrical and mechanical and CVSA requirements. parts are made for easy • Flexible, conforms to maintenance. and controls the load. SECURE YOUR LOADS WITH • Design assures • Ratchet assembly THESE QUALITY TIEDOWNS! long trouble-free life. allows fast, easy adjustment. • Special electrical relay protects against damage LiftAll Code: 61002 SPECIFICATIONS: caused by power failure. Part No. 3-003-30001 Strap Width...... 2" $ 62 Breaking Capacity ...... 10,000 lbs. Reg. Net Price $57.20 48 Capacity ...... 3,000 lbs. SMOOTH RUNNING

Part No. 2-011-211 Reg. Net $ 24 Quill Kit Price $696.75 592 With ABSOLUTE Encoder SPECIFICATIONS: Input Voltage ...... 110V, 50/60 Hz., 1PH FEATURES: Speed Range ..... 4-160 MAX 200 RPM • Push button controls for Operating Torque ...... 150 in/lbs. inch/mm, zero-set and on/off. • Easy to read LCD with resolution of .0005" (0.01mm). 0-5" travel inch/mm. • Powered by a single SR-44 battery lasting about 1 year with normal use. • SPC Output for data transmission to data processors or a remote display. Easy installation Pro Lathe fits most vertical Gage Part No. 1-808-053906 $ 80 knee mills. Reg. Net Price $388.00 329 Hand Free Design! FEATURES: • Durable anodized finish. Anti-Scratch Anti-Fog • Ground steel shaft mounted on dual precision ball bearing. Welding Goggles • Made from high strength aluminum. FEATURES: • Set turning, and facing Part No. 1-811-02000 • Designed for gas tools on spindle axis for Reg. Net Price $54.23 welding and plasma cutting. Part No. 1-701-41217 optimum cutting conditions. • Equipped with IR5 lenses • Precision glass vial level $ 81 that are designed to prevent Reg. Net Price $24.49 with 30' (2mm) sensitivity. scratching and fog build up. 48 • Flexible 180o viewing angle. $ 82 • Can be used with glasses. 20 • Vented to eliminate fog. • Frame Material: PVC (Polyvinyl chloride). PERFECT FOR LIGHT TO MEDIUM • Meets ANSI Z87.1 standards. SOLDERING, BRAZING, CUTTING OR WELDING. 1500 Lumen • Lens Dimensions: 8-7/8" x 3-5/16". LED Work Light Law® Over The Glass FEATURES: Clear Safety Glasses • Cool to the touch. • Long lasting, Anti-Fog - Silver Temple Color super bright LED. • Sealed on/off switch. • Adjustable scissor stand. • Tripod mountable. FEATURES: • 5' Cord length. • 5 position ratchet action temple allows lens angle adjustment. Part No. 1-909-36013 • Rugged polycarbonate lens filters 99.9% of harmful UV rays. Reg. Net Price $51.93 • Dielectric design, no metal parts. • Non-slip TPR temples give the user comfort $ 54 and grip and the wrap-around style allow 41 improved angular coverage and peripheral vision. • Exclusive Duramass® scratch resistant coating. Part No. $ 21 • Oversized frame and lens to fit over prescription glasses. 1-711-OG110AF 9

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 31 FLUIDS

Refillable Aluminum Spray Bottle Ideal for Lubricants, Rust Preventatives, & Brake Cleaning Fluids.

INCLUDES: • 7.7 oz Spray Bottle. • Jet Nozzle: 6.1" (155mm). Valve Action® Paint Markers • Conventional Spray Nozzle. FEATURES: YOUR CHOICE • Economic and ecologically-friendly FEATURES: NOW $ 05 alternative to aerosol spray cans. • For improved mark identification, ONLY! • Durable 2-part construction allows quality control, and parts inspection. 4 for easy filling, maintenance & cleaning. Marks in Reg. Net Price $4.76 • Fast-drying, permanent paint for immediate Real Paint! • Brass air valve allows for easy handling reduces work downtime. maximum pressurization of 116 PSI. • Dura-Nib medium bullet tip resists wear. Part No. • Not recommended for paint, air • Durable metal barrel and clip-cap. Color 1-443- dusting, acids, or corrosive chemicals. • Xylene-free paint reduces user health risks and White -96800 eliminates California Proposition 65, EPA HAPS Yellow -96801 Part No. 1-541-19426 $ 43 and SARA 313 concerns in the U.S.A. Reg. Net Price $105.90 79 • Marking Range: -50oF to 150oF. Red -96802

® Tapmatic 262™ Threadlocker Edge Lube High Strength / Red / Permanent

FEATURES: 60M-12 Excellent for preventing • White, solid, waxy bar. PORTaMIST rust and corrosion. • Extends grinding wheel life. FEATURES: • Excellent for belt, wheel or disc Only • Apply to fasteners up to 3/4" grinding, and sawing applications. in diameter before assembly. • Low toxic, biodegradable, low odor. Includes 1 delivery line. • High lubrication for easy assembly. • Eliminates heat • Solvents will not weaken the adhesive bond. build-up and belt loading. Part No. • Localized heat & tools required to separate. • Does not contain 1-437-565 any hazardous chemicals. Reg. Net Part No. Reg. 13 oz. Tube Price $199.95 Size 1-444- Net Price SALE! Part No. 1-444-43200 $ 56 $ 96 10 ml bottle -26221 $18.82 $16.00 Reg. Net Price $28.40 25 169 50 ml bottle -26231 60.56 51.48

Adjustable Coolant Hose System Kits THE ORIGINAL MODULAR HOSE SYSTEM! FEATURES: • Loc-Line® is electrically non-conductive. KITS INCLUDE: 1/4" Hose Kit 1/2" Hose Kit It is ideal for use as an EDM flushing hose. • Male NPT Part No. 1-836-40413 Part No. 1-836-50813 • Loc-Line® will stay in position without any springback. Connectors: 3/8 & 1/2" Reg. Net Price $13.83 Reg. Net Price $15.59 Creep due to machine vibration is eliminated. • Nozzles: 1/16, 1/8 & 1/4" • Loc-Line® is fully hand-adjustable • 13" Length w/ Fittings: $ 45 $ 03 in both position and length. (2) 5-3/4" Segments 12 14

Flood Type SAWZIT™ 2000 ALL PURPOSE SAWING Coolant Unit LUBRICOOLANT FEATURES: • Tanks are made of oil FEATURES: resistant polyethylene. • New semi-synthetic transparent lubricoolant that WATER SOLUBLE! • Screen and chip collector are will handle your toughest metal working applications. easily removed for fast cleaning. • Cools the work to prevent distortion and • Centrifugal pumps are available discoloration from residual heat on all metals. for all machine tool coolant units. • Low foaming which means exceptional clarity. • The flow of coolant liquids can be • Does not contain sulfurs, chlorine, regulated to any desired amount nitrates or heavy duty salts. without harmful effects to the motor • Less down time cleaning machine (flow cannot be completely shutoff). which means more parts output. • Extended tool life through Model VMC-1 increased lubrication. Performance (GPH @ Head) • Will stay transparent Part No. 1-440-001 $ 96 Water Soluble Oil at any dilution ratio. Reg. Net Price $295.25 • Long sump life. 250 1’ 3’ 6’ 9’ SPECIFICATIONS: 108 100 86 60 1 Gallon 5 Gallon Pail Motor ...... 115V Part No. 1-123-205 Part No. 1-123-210 Shut-Off ...... 11.5' APPLICATIONS: Reg. Net Price $29.68 Reg. Net Price $142.06 Power Cord ...... 4' • Cut-Off Saws • Drill Presses Dimensions ...... 9.38" H x 12" L x 6" W • Bench Mills • Tool Grinders $ 71 $ 96 Weight ...... 6 lbs. • Lathes • Tapping Machines 26 134

32 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com HAND TOOLS ® 22 Pc. ColorGuard™ ® Click Torque Wrenches Ball End L-Wrench Set

FEATURES: • Color-coded to be distinguished at a glance. • Superior rust protection finish. • Sizes are stamped on the tool. • Ball End inserts into screw at a 25° angle. • ColorGuardTM is a color-coded protective finish: durable color-coded finish for superior protection and easy tool identification. 1/4" Drive FEATURES: Torque Range: 20-200"/lbs. • Hear and feel wrench click when torque value is reached. Part No. 1-909-2432 $ 62 Combo Inch / Metric • High-contrast dual range scale Reg. Net Price $88.97 75 #69637 (.050" thru 3/8") & is easy to read in low light. #69699 (1.5mm thru 10mm) • Reversible drive chrome 1/2" Drive Part No. 1-927-69600 $ 04 vanadium steel ratchet head. Torque Range: 10-150 ft./lbs. Reg. Net Price $82.55 • Durable all-steel construction 66 with corrosion-resistant finish. Part No. 1-909-2460 $ 79 • Knurled handle provides a Reg. Net Price $90.34 76 sure, non-slip grip. 148 Pc. Master 3/8" Drive Torque Range: 120-960 inch/lbs. Security Bit Set Supplied with conversion table chart Part No. 1-909-2455 $ 02 Assortment of the most and storage case. Reg. Net Price $80.02 68 popular and hard-to-find bits for many different applications. 12 Pc. Screw Extractor Set SET INCLUDES: • 3-1/2" Magnetic Bit Holder. For removing broken screws, • Quick-Release Bit Holder. bolts, studs, and pipes. • 1/4" Driver Socket Adapter. Siizes: #1 to #6. • Contains Phillips, Slotted, Supplied with injection Square, Star, Pozi, SAE molded storage case. Part No. Hex, Metric Hex, Tamper 1-397-6718 Resistant Star, Tamper Reg. Net Resistant Hex, Clutch, Part No. 1-909-16148 Spline Spanner, Tri-wing $ 95 Price $24.72 and Quad-Wing drive bits. Reg. Net Price $85.34 59 $2225 Supplied in a KLEIN TOOLS plastic case. 10 Pc. 6" T-Handle Hex Key Wrench Set Transfer Punch Set 3/32" to 1/2" by 64ths. PLUS Handy 17/32" Size! FEATURES: Part No. • Soft touch grips for maximum 8-408-001 control and comfort. • Blade-through handle design Reg. Net for high torque applications. Price $22.94 • T-Handle design delivers maximum power. $ 50 • Convenient hang hole. 19 • Treated steel for rust and corrosion resistance. Inch Set Includes: • Tip-Ident sizes marked. 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", • Sizes laser etched on blade. 7/32", 1/4", 5/16" & 3/8" 8 Pc. Drive Pin • Chamfered end. Part No. 1-927-70152 $ 97 • Supplied with a metal stand. Reg. Net Price $90.55 76 Punch Set

Pliers Model 1435 FEATURES: • Striking head and front FEATURES: taper centerless ground. • A flip of the tab and the pliers change • Heavy knurled finger grip. between internal and external applications. • Shiny black oxidized finish. • Adjustable stop on the pliers jaw allows • Single piece made you to turn clockwise to reduce jaw opening from hardened and and counter-clockwise to increase jaw opening. tempered tool steel. • Comfort grip made of low-temp, high- • Tip hardened impact material providing extra durability. to 45-52 HRC. Part No. 1-397-SPC80 5 Color Coded Pairs Of Tips SIZES INCLUDED: Reg. Net 1/16", 3/32", 1/8", 5/32", Straight Sizes: .036", .047", .070". Part No. 1-820-335 Supplied with a Price $19.80 o 3/16", 7/32", 1/4", 5/16" Bent 90 Sizes: .036", .047". Reg. Net Price $40.58 hex wrench in a $ 85 master pouch for Supplied in a plastic case. External Ring Sizes 1/4" thru 2" $ 49 convenient storage. 14 Internal Ring Sizes 3/8" thru 2" 34

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 33 POWER / AIR TOOLS Right Angle Die Grinder Bench Grinders FEATURES: • Angled head makes it ideal Provides 88 plus minutes of for working in tight spaces. continuous use at full load with • Features smooth-action safety lever throttle. less than 1% RPM loss from the • Grinder collet holds most 1/4" shank wheels, stated maximum. Capacitor motors bits and other accessories. Hooks up to any supply the extra current required 1/4" air hose coupling. during start-up and running under • Includes internal regulator load. Large diameter armature to control air pressure. Model PT2412 shaft with shielded ball bearing. Part No. 1-832-PT2412 CSA NRTL/C certified. SPECIFICATIONS: Reg. Net Price $77.19 FEATURES: INCLUDES: Speed ...... 20,000 RPM • Heavy-duty construction with powerful, • Tool Rest Air Consumption ...... 3 CFM $ 31 long-life motor for use all day, everyday. • Eyeshields Overall Length ...... 4-7/8" 46 • Large cast aluminum tool rest tilts for angle grinding. • Spark Arrestors • For general purpose grinding including sharpening, shaping, • (1) 36 Grit & (1) 60 deburring, stock removal and cleaning of rust & scale. Grit Grinding Wheel Micro Air Die Grinder • Dust collection hose on #82081 (2-1/2"). • Power Cord

FEATURES: Wheel Max Arbor Part No. Reg. • Rear exhaust. Dia. H.P. Voltage (Phase) RPM Size 1-549- Net Price NOW! • Slim and comfortable design. 6" 1/3 120/240 (1 PH) 3,450 1/2" -82061 $209.25 $177.86 • Ideal for final cleaning 8" 3/4 120/240 (1 PH) 3,450 5/8" -82081 398.35 338.60 and polishing of dies, jewelry and hobby use too. • Built-in variable speed twist air regulator. • Includes nipple and wrenches. 4-1/2" SPECIFICATIONS: Small Angle Free Speed ...... 56,000 RPM Collet Size ...... 1/8" INCLUDES: Grinder Air Pressure ...... 90 lbs. PSI Part No. 1-829-6200 • Blade wrench. Air Consumption ...... 2 CFM Reg. Net Price $66.57 • 2 position side handle. Hose Size ...... 3/8" • Keyless adjustable guard. Air Inlet ...... 1/4" NPT Overall Length ...... 5-1/4" $ 58 Weight ...... 0.44 lbs. 56 SPECIFICATIONS: Spindle Thread ...... 5/8"-11 No Load Speed...... 11,000 RPM Motor...... 11 AMP 2" Belt Length ...... 11-1/4" Part No. 1-826-D28402 $ 11 Sander Weight ...... 4.6 lbs. Reg. Net Price $203.66 173 FEATURES: FEATURES: • Tilt Table. Part No. • Designed for faster material removal • Quick-ChangeTM Wheel Release • 2" x 48" Belt. 2-002-2FSM and higher overload protection. provides easier and quicker wheel • Direct drive 1/2 HP, 115V, • Dust Ejection SystemTM provides removal without the need for a wrench. 1 PH motor. Reg. Net durability by ejecting dust particles • Auto-off shuts the tool down • Hinged guard for quick Price $901.75 that enter the tool through the when the brushes need replacing belt change. air intake vents. to avoid tool damage. • Shipping Weight $ 58 • Keyless adjustable guard provides • Paddle switch lock-off provides the user (approx.): 55 lbs. 811 tool free guard adjustment. protection from accidental start-up.

1/4" .6 HP Sawzall® Recip Extended Saw Kit Die Grinder

FEATURES: FEATURES: • Maximum cut control. • Four ball-bearing construction. • Powerful motor delivers • Insulating vinyl cover for comfort. high performance cutting SPECIFICATIONS: • Front exhaust design. in a variety of materials. Voltage ...... 120V AC • Counter weighted Motor...... 12 AMP SPECIFICATIONS: Model MG6HDE mechanism provides reduced Collet Size ...... 1/4" No Load Speed...... 0-3,000 SPM vibration for smoother operation. Stroke/Cord Length ...... 3/4"/10' Speed ...... 20,000 RPM Part No. 3-001C-402115 $ 76 • Gear protecting clutch extends Avg. Air Consumption ..... 4.5 CFM Overall Length ...... 19" Reg. Net Price $263.25 223 gear and motor life by absorbing high Tool Weight ...... 7.1 lbs. Air Inlet ...... 1/4" NPT impact forces caused by blade lock-ups. Recomm. Air Pressure ...... 90 PSI • QUIK-LOK blade clamp provides Overall Length ...... 12" fast, tool-free blade changes. Part No. 1-828-6509-31 $ 34 Weight ...... 2.8 lbs. • Supplied with a carrying case. Reg. Net Price $260.40 221

Electromagnetic ELECTROMAGNETIC DRILL STAND ONLY Max. Drill Point Drill Presses Voltage/ Pressure On Drill Dimensions Weight Part No. Reg. AMP 1" Steel Plates Travel (H x W x L) (lbs.) 1-828- Net Price SALE! FEATURES: 120/12.5 1,650 lbs. 9" 15" x 4-1/4" x 11" 41 -4202 $1566.75 $1410.08 • For use on any flat ferrous material 1/2" & thicker. • Line lock-out prevents tool from operating should voltage be restored to an interrupted DRILL line when switch is locked in the "on" position. MOTORS • Forward/reverse & feedback speed control. • Full wave magnetic holding power. • Superior cutting tool performance. DRILL MOTORS FOR STANDS • Solid state electric switching. Drill Tap No Load Chuck Part No. Reg. • Automatic base/chip de-mag. Voltage Cap. Cap. AMPS RPM or Taper 1-828- Net Price SALE! • Automatic electronic soft-start. 120 1/2" 5/8"-18 6.2 600 Chuck -42531 $629.30 $566.37 • Computer controlled reverse. 120 3/4 1"-14 11.5 350 Chuck -42621 1054.65 949.19 120 1-1/4 1"-14 11.5 750/375 #3MT -42921† 1336.75 1203.08 • Motor/magnet interlock. DRILL • Base control panel includes STAND • Two Speed Drills, 5/8"-11 or 1/2"-13 taps not recommended. variable speed adjusting for motor. † Drills except #42531 have dual mount gear case

34 Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com Knife & Tool Precision Adjust Sharpener MK.2 Designed to Knife Sharpener™ sharpen every With Tri-Brasive™ and Pivot Response™ Two speed control with knife you own! precision angle sharpening Makes manual sharpening faster, guides that quickly toggle easier and more precise than ever! between the 25° angle for hunting and outdoor knives and the 20° angle for thinner blades and kitchen knives. FEATURES: • Tri-brasive™ rod quickly indexes between INCLUDES: coarse and fine diamond and fine ceramic stone. • 6 Pc. 1/2" x 12" abrasive belt kit • Tri-Brasive™ includes coarse 320 & fine 600 grit (2) P80 coarse grit, (2) P220 diamond plates and a fine grit ceramic stone. • Removable v-block clamp secures medium grit, (2) 6000 fine grit. Model #WSKTS2 Model #WSBCHPAJ • Adjustable knife sharpening guide with knife safely and consistently. Part No. 1-817-40303 serrated knife guide and scissor guide. Part No. 1-817-40402 $ 68 • Sharpening angle can be easily $ 98 • 3 Year Warranty. Reg. Net Price $154.92 131 adjusted from 15°- 30°, in 1° increments. Reg. Net Price $92.92 78 Precision Drill Bit Sharpener Special Use Files With 180 Grit Wheel

Restore bits 6" x 1/4" x 1/4" Metal Substrate FEATURES: to like-new • E-Z Align SystemTM. sharpness 6" x 1/4" FEATURES: DIAMOND SECTION • Sharpens 3/32-3/4" high-speed steel, in less than • A quick, easy way to masonry, carbide, and TiN-coated bits. 60 seconds! sharpen both cutlery and tools. Part No. • Custom points from 115°-140°. • Tougher, longer lasting, heat Grit 1-609- ONLY! • Adjustable Material Take-Off (MTO). treated diamond sharpening. • Creates split-point bits from standard bits. Model DD750X Fine (600) -11F $9.17 • Unique bonding of diamond Medium (270) -11M 11.15 • Quick change diamond sharpening wheel. Part No. 1-817-DD750X $ 14 surface to the substrate. Coarse (180) -11C 13.13 • 3 Year Warranty. Reg. Net Price $240.17 204

6" x 2" Diamond Credit Double Sided Card Stones 2" x 3-1/4" Diamond Stones Sharpens quickly. For use on hard material and stays flat. FEATURES: Reg. Net Price • A quick, easy way to sharpen Each 79.02 Part No. both cutlery and tools. Part No. Grit 1-609- ONLY! • Tougher, longer lasting, heat NOW ONLY! Grit 1-609- Super Fine (1200) -200 $15.76 treated diamond sharpening. Fine (600) & Medium (400) -DD6FM Fine (600) -201 15.76 • Unique bonding of diamond $ 17 Fine (600) & Coarse (250) -DD6FC Medium (400) -202 19.72 surface to the substrate. 67 Medium (400) & Coarse (250) -DD6MC Coarse (250) -203 23.65

Diamond SETS Part No. Reg. Hone & Stone Qty. Grit 1-609- Net Price SALE! Handle Part No. Grit Color 1-609- ONLY! Set of 3 Super Fine, Fine, -LPAK3 $24.98 $21.23 & Medium FEATURES: Super Fine (1200) Blue -LSF $7.84 • 2" x 3/4" diamond pad on a 6" x 3/4" Fine (600) Red -LF 7.84 Set of 4 Super Fine, Fine, -LPAK4 35.53 30.20 plastic handle. Medium (400) Purple -LM 9.82 Medium, & Coarse • Very effective in hard to get places carbide Coarse (250) Black -LC 11.80 Set of 5 Super Fine, Fine, Med., -LPAK5 46.06 39.15 table saw blades, router bits, deburring. Extra Coarse (150) Green -LXC 14.43 Coarse, Extra Coarse

4" India Abrasive Combination Coarse Fine Grit Files Aluminum Oxide Bench Stones

Smooth cutting and ideal when a close Crystalon (Silicon Carbide): tolerance is more important than the speed of cut. Fast cutting stone; ideal for general sharpening of cutting tools. Fast stock removal for quick edge Triangular sharpening with minimal loading. Abrasive Files Square Abrasive Files India (Aluminum Oxide): Smooth Used for a variety of deburring, cutting stone; ideal for clean deburring, chamfering and radiusing applications. Ideal for dimensioning keyways, generating keen edges and quality fine stoning faces, touching-up edges, finishes. Long lasting cutting edge. Part No and lapping/honing to close tolerance. Width Grit 1-632- ONLY! Crystalon India 1/4" Medium -86235 $12.30 Part No. Part No. Reg. Part No. Reg. 1/4 Fine -86230 12.30 Width Grit 1-632- ONLY! Size 1-632- Net Price NOW! 1-632- Net Price NOW! 3/8 Medium -86250 13.35 1/4" Medium -86070 $9.56 4" x 1" Round -85435 $35.40 $30.09 -85545 $33.55 $28.52 3/8 Fine -86245 13.35 1/4 Fine -86065 9.56 6 x 2 x 1 -85450 35.05 29.79 -85560 32.88 27.95 1/2 Medium -86265 13.58 3/8 Medium -86085 9.82 8 x 2 x 1 -85455 42.11 35.79 -85565 39.39 33.48 1/2 Fine -86260 13.58 3/8 Fine -86080 9.82 1/2 Medium -86100 9.87 1/2 Fine -86095 9.87 India Abrasive 5" x 1" x 3/16" Round Abrasive Files Aluminum Ideal for deburring, chamfering, Knife Blade Files Reamer Stone Oxide radiusing, honing, for cleaning radius tools, Quickly sharpen, hone and and for dimensioning compound curves. Durable, fast cutting maintain the edges and points of cutting tools. stone; ideal for imparting Part No. a professional edge Width Grit 1-632- ONLY! Part No. on reamers, taps Width Grit 1-632- ONLY! and rough rounders Part No. 1/4" Medium -86475 $15.37 $ 37 1/4 Fine -86470 15.37 1" x 1/8" Back Fine -86770 $16.85 on shoe machine tools. 1-632-87425 13

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 35 GET ONE 3 LOCATIONS TO SERVE YOU! TODAY! Showroom Hours: Monday to Friday 8am - 5pm Fast, Easy Product KBC Volume 52 Search and Filtering, Master Catalogue Over 860 Pages of Exclusive Web Offers, our Best Products Mobile Friendly, PLUS thousands of New Items added! Real-time Inventory, Live Chat & More! To Request a Copy NA Toronto Maritimes to Saskatchewan A D Call 1-888-KBC-TOOL or go to KBCTools.com C A 6200 Kennedy Rd., Unit #1 H Mississauga, ON L5T 2Z1 E A Local Calls ...... (905) 564-6600 S D Q R Fax Main Line .. (905) 564-1611 U ART E

Windsor Windsor to London 5080 O’Neil Oldcastle, ON N0R 1L0 6200 KENNEDY ROAD, UNIT #1 Local Calls ...... (519) 737-7000 MISSISSAUGA, ON L5T 2Z1 Fax Main Line .. (519) 737-7682

British Columbia Vancouver & Alberta 108-1538 Cliveden Ave. Delta, BC V3M 6J8 Local Calls ...... (604) 540-4060 Fax Main Line .. (604) 540-4080

ATTN: PURCHASING DEPARTMENT

Solid Carbide Reamers STRAIGHT Carbide SHANK Inserts For general purpose reaming applications in ferrous metals and most non-ferrous materials. Precision ground with straight flutes STRAIGHT MICRO 100 is a space age, micro grain carbide for making smooth, accurate holes while retaining long tool life. FLUTE of excellent quality. It is in a class of its own, resulting from the exclusive treating process. DCMT CCMT Micro grain carbide has superior rupture strength for exceptional machining versatility. It is also highly shock resistant, it will not chip or break ICIC Decimal. Flute Part No. Reg. under normal machining conditions and Size Equiv. Length OAL 5-661- Net Price SALE! is unexcelled in interrupted cutting. 1/16" .0625" 3/8" 1-1/2" -018 $21.48 $18.26 It prolongs tool life in machining 1/8 .1250 5/8 2-1/4 -044 29.20 24.82 all hard stainless steels, and LL 3/16 .1875 7/8 2-3/4 -066 39.25 33.36 4 Flute below also efficiently performing 1/4 .2500 1 3 -087 52.27 44.43 1/4" diameter. in exotic metals. APKT 5/16 .3125 1-1/8 3-1/4 -100 70.31 59.76 6 Flute on FF r r TT 3/8 .3750 1-1/4 3-1/2 -111 84.35 71.70 larger sizes. TCMT 7/16 .4375 1-3/8 3-3/4 -117 109.55 93.12 APKT Inserts 1/2 .5000 1-3/8 4 -121 136.80 116.28 Insert Part No. Reg. Style I.C. L T r F 1-428- Net Price SALE! APKT 1003PDR .264" .413" .137" .020" .047" -502100 $17.44 $14.82

CCMT Inserts - 80o Diamond 6 Pc. Telescoping Insert Hole Corner Part No. Reg. Gage Set Style I.C. Dia. Thickness Radius 1-428- Net Price SALE! CCMT 21.51 1/4" .110" 3/32" 1/64" -501100 $15.73 $13.37 FEATURES: • Rigid handle with DCMT Inserts - 55o Diamond self-centering feature. • Satin chrome finish. Insert Hole Corner Part No. Reg. • Sizes 5/16"- 6" in plastic case. Style I.C. Dia. Thickness Radius 1-428- Net Price SALE! • Made of hardened tool steel. DCMT 21.51 1/4" .110" 3/32" 1/64" -501200 $16.66 $14.16 "DOUBLE ACTION" TCMT Inserts - 60o Triangle Part No. Self-Centering 8-412-004C Insert Hole Corner Part No. Reg. Style I.C. Dia. Thickness Radius 1-428- Net Price SALE! Reg. Net $ 70 Price $30.23 TCMT 21.51 1/4" .110" 3/32" 1/64" -501300 $14.03 $11.93 25

WEB:: PHONE: 5 2 2 8 6 6 5 FAX: KBCTools.com 1-888-KBC-TOOL 1-800-668-5615