DOCSLIB.ORG

Download Product Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Download Product Guide 5903-C Peachtree Industrial Blvd. • Norcross, GA 30092 • 770-416-0088 • 770-416-0095 FAX • prefpkg.com Table of Contents Roll Stock Films ...............................................3 Meal and School Lunch Trays ..........................4 Fruit Cup and Vegetable Portion Trays ............5 Side Salad, Bun and Dessert Trays .................6 Hinged Lid and Container/Lid Combos ............7 Utility and Reimbursable Meal Pack Trays .......8 Ovenable CPET Trays .....................................9 Medium and Large Entrée Platters ...........10 -11 Sandwich Wedge, Hot Dog and Hoagie ........12 Overwrap Trays .............................................13 Heat Seal and Support Equipment ...........14-19 Preferred Packaging Sales and Service is small enough to offer quick, personalized service but large enough to handle all of your needs. We are dedicated to providing quality products. Preferred Packaging Our team understands your Sales and Service operation and works with you Contact our Sales Department: to create effective and efficient packaging solutions. 770-416-0088 770-416-0095 fax [email protected] prefpkg.com osmachines.com Roll Stock Films Our inventory of various film types and a full range of converting equipment allows us to maintain our quality service and quick turnaround commitment to our customers. Lidding Films Films that seal to all material, including PP, CPET, APET, PS and coated paperboard. Seal strength can vary from easy peel to weld seal. Dual-Ovenable Films These films are perfect for the packaging of any applica- tion that needs to be heated in an oven or microwave. Anti-Fog Films Films treated to stay clear under heat or refrigerated conditions. Vertical and Horizontal Form Fill and Seal Films Our roll stock for VFFS and HFFS applications is fully customizable. Polypropylene (BOPP) and Polyester Overwrap Films Our PP and PE high speed overwrap films are avaiable in a full range of thicknesses. Custom In-House Printing and Lamination We specialize in custom printed films up to “8” colors to cover just about every tray application imaginable includ- ing ovenable overwrap. We can surface print or reverse printed film “buried” within a protective laminate layer. Barrier Films We have the ability to provide different barrier levels to achieve the OTR and WVTR to meet your needs. Perforated Films Laser perforations to adjust OTR to extend the shelf- life of your freshcut produce, by properly controlling the release of Co2 and the entry of O2 into the package. Hot pin for moisture evacuation to maintain crispness. Specialty Films Available in clear, white or metalized. We also offer Retortable and HPP applications. These films can be sealed to CPET, APET, PP, PS, PVC or Paperboard substrates. Preferred Packaging Sales and Service • 5903-C Peachtree Industrial Boulevard • Norcross, GA 30092 3 NT100 Meal and School Lunch Trays One Compartment Salad/ School Lunch Tray Size: 6-1/2” L x 5” W x 1-5/8” D Colors: Clear Wt. Cube Count 17 lbs. 2.30 500 ea. NT150 One Compartment Salad/ School Lunch Tray Size: 6-1/2” L x 5” W x 2-1/8” D Colors: Clear Wt. Cube Count 17 lbs. 2.30 500 ea. NT200 Two Compartment Salad/ School Lunch Tray Size: 6-1/2” L x 5” W x 1-5/8” D Colors: Clear Wt. Cube Count 17 lbs. 2.30 500 ea. NT275 One Compartment Salad/ School I-312 Insert (NT275 & NT312 only) 275-1 Insert (NT275 & NT312 only) Three Lunch Tray Four Compartment Condiment Compartment Condiment Salad/ School Size: 6-1/2” L x 5” W x 2-3/4” D Col- Salad/ School Lunch Tray Lunch Tray ors: Clear Size: 6-1/2” L x 5” W x 1-1/16” D Size: 6-1/2” L x 5” W x 1” D Colors: Clear Colors: Clear Wt. Cube Count 14 lbs. 2.30 500 ea. Wt. Cube Count Wt. Cube Count 13 lbs. 2.17 1200 ea. 17 lbs. 1.92 1000 ea. NT312 One Compartment Salad/ School Lunch Tray NT-4C (Film Sealable) Size: 6-1/2” L x 5” W x 3-1/8” D Col- SNACK/ LUNCHABLE TRAY ors: Clear Size: 6-1/2” L x 5” W x –7/16” D Colors: Clear Wt. Cube Count 34 lbs. 4.63 1200 ea. Wt. Cube Count 17 lbs. 2.30 500 ea. NT100-MW (High Heat) One Compartment Salad/ School NT312 with the I-312 Lunch Tray Condiment Insert Size: 6-1/2” L x 5” W x 1-1/2” D Colors: Black “Microwavable” Wt. Cube Count 12 lbs. 2.17 500 ea. NT140-MW (High Heat) One Compartment Salad/ School Lunch Tray Size: 6-1/2” L x 5” W x 1-1/8” D Colors: Black “Microwavable” Wt. Cube Count 12 lbs. 2.17 500 ea. NT130-2HB MW (High Heat) Two Compartment Salad/ School Lunch Tray Size: 6-1/2” L x 5” W x 1-1/8” D Colors: Black “Microwavable” Wt. Cube Count 13 lbs. 2.17 500 ea. 4 Preferred Packaging Sales and Service • 770-416-0088 • 770-416-0095 fax • [email protected] Fruit Cup and Vegetable Portion Trays D72R 5 oz. Dessert/ Portion Tray Size: 3-1/2” L x 3-1/2” W x 1” D Colors: Clear Wt. Cube Count 15 lbs. 2.06 2000 ea. D72R-MW (High Heat) 5 oz. Dessert/ Portion Tray Size: 3-1/2” L x 3-1/2” W x 1-1/4” D Colors: Black “Microwavable” Wt. Cube Count 9 lbs. 1.58 1000 ea. D74R-HD 7.5 oz. Dessert/ Portion Tray Size: 3-1/2” L x 3-1/2” W x 1-3/4” D Colors: Clear Wt. Cube Count 20 lbs. 3.75 2000 ea. D74-MW * (High Heat) 7.5 oz. Dessert/ Portion Tray Size: 3-1/2” L x 3-1/2” W x 1-3/4” D Colors: Black “Microwavable” Wt. Cube Count 12 lbs. 2.74 1000 ea. D78R-HD 8 oz. Dessert/ Portion Tray Size: 3-1/2” L x 3-1/2” W x 2-3/4” D Colors: Clear Wt. Cube Count 13 lbs. 2.74 1000 ea. Try our stock school print lidding film or have our in house graphics department create your own custom designed printed film. Preferred Packaging Sales and Service • 5903-C Peachtree Industrial Boulevard • Norcross, GA 30092 5 Side Salads, Bun and Dessert Trays SB1 10 oz. Salad/ Dessert Tray Size: 4-5/8” L x 4-5/8” W x 1-3/8” D Colors: Clear Wt. Cube Count 16 lbs. 2.75 1000 ea. SB2R-HD 14 oz. Salad/ Bun/ Dessert Tray Size: 4-5/8” L x 4-5/8” W x 2” D Colors: Clear Wt. Cube Count 16 lbs. 2.20 1000 ea. SB3R-HD 18 oz. Salad/ Bun/ Dessert Tray Size: 4-5/8” L x 4-5/8” W x 2-3/4” D Colors: Clear Wt. Cube Count 17 lbs. 2.20 1000 ea. SB5R-HD 16 oz. Salad/ Bun/ Dessert Tray Size: 6-1/2” L x 5” W x 2-3/4” D Colors: Clear Wt. Cube Count 17 lbs. 2.20 1000 ea. SB2RHD-MW (High Heat) 14 oz. Salad/ Bun/ Dessert Tray Size: 4-5/8” L x 4-5/8” W x 2” D Colors: Black “Microwavable” Wt. Cube Count 16 lbs. 2.20 1000 ea. SB20* 20 oz. Chef Salad/ Hamburger Tray Size: 5-1/2” L x 5-1/2” W x 2” D Colors: Clear Wt. Cube Count 18 lbs. 3.86 1000 ea. SB32* 32 oz. Chef Salad/ Hamburger Tray Size: 5-1/2” L x 5-1/2” W x 2-1/2” D Colors: Clear Wt. Cube Count 13 lbs. 3.99 500 ea. 6 Preferred Packaging Sales and Service • 770-416-0088 • 770-416-0095 fax • [email protected] Hinged Lid and Container/Lid Combo Trays SW-1* Small Hinged Lid Sandwich Wedge Size: 7” L x 3-5/8” W x 3-3/8” D Colors: Clear Wt. Cube Count 12 lbs. 3.02 500 ea. J0-14* Hot Dog/ Hoagie Tray Size: 7-1/8” L x 3-3/4” W x 2-1/8” D Colors: Clear Wt. Cube Count 14 lbs. 2.62 1000 ea. 7150-CLR COMBO* 24 oz. Salad Bowl with Anti-fog Lid Size: Bowl - 7-5/8” Diam. x 1-1/2” D Lid - 7-5/8” Diam. x 3/4” D *Special Order Wt. Cube Count 100 Case Minimum 15 lbs. 3.17 200 ea. Microwavable Container/Lid Combo Trays 7150-MW COMBO (High Heat)* 24 oz. Salad Bowl with Anti-fog Lid Size: Bowl - 7-5/8” Diam. x 1-1/2” D Lid - 7-5/8” Diam. x 3/4” D Colors: Clear Lid, Black Base Wt. Cube Count 15 lbs. 3.17 200 ea. 7200-MW COMBO (High Heat)* 2 Compartment Salad Bowl with Anti-fog Lid Size: Bowl - 7-5/8” Diam. x 1-1/2” D Lid - 7-5/8” Diam. x 3/4” D Colors: Clear Lid, Black Base Wt. Cube Count 15 lbs. 3.17 200 ea. 912-MW/ L900-AF Combo (High Heat)* 12 oz. Casserole Container Size: Bowl - 5-1/2” x 8-1/8” x 1-1/4” D Lid—7-5/8” L x 5-3/4” D Colors: Clear Lid, Black Base Wt. Cube Count 9 lbs. 1.37 250 ea. Preferred Packaging Sales and Service • 5903-C Peachtree Industrial Boulevard • Norcross, GA 30092 7 Reimbursable Meal Packs/ Utility Trays SL64 One Compartment Utility/ School Cold Pack Tray Size: 9-1/4” L x 7-1/16” W x 2” D Colors: Clear, Black Wt. Cube Count 26 lbs. 4.63 500 ea.
Load more

Recommended publications
  • The Effects of Various Retort Motions on the Rate of Heat Penetration of a Food Simulant in Pouches" (2018)
    Clemson University TigerPrints All Dissertations Dissertations 12-2018 The ffecE ts of Various Retort Motions on the Rate of Heat Penetration of a Food Simulant in Pouches Mollye MacNaughton Clemson University, [email protected] Follow this and additional works at: https://tigerprints.clemson.edu/all_dissertations Recommended Citation MacNaughton, Mollye, "The Effects of Various Retort Motions on the Rate of Heat Penetration of a Food Simulant in Pouches" (2018). All Dissertations. 2260. https://tigerprints.clemson.edu/all_dissertations/2260 This Dissertation is brought to you for free and open access by the Dissertations at TigerPrints. It has been accepted for inclusion in All Dissertations by an authorized administrator of TigerPrints. For more information, please contact [email protected]. THE EFFECTS OF VARIOUS RETORT MOTIONS ON THE RATE OF HEAT PENETRATION OF A FOOD SIMULANT IN POUCHES A Dissertation Presented to the Graduate School of Clemson University In Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy Food Technolgy by Mollye MacNaughton December 2018 Accepted by: Dr. William Scott Whiteside, Committee Chair Dr. Taner Baysal Dr. Paul Dawson Dr. Ron Thomas i ABSTRACT Processing foods in a retort is a reliable and established method of creating sterile and shelf stable products. The formula of the product and the package size dictates the processing time. Rotary retorts were invented to agitate cans to reduce the processing times and create uniform heating within the can. Recently, horizontal
    [Show full text]
  • Film Performance of Poly(Lactic Acid) Blends for Packaging Applications
    RESEARCH ARTICLE Film Performance of Poly(lactic acid) Blends for Packaging Applications PREFACE API 2015 Carlos Diaz Hsun Yi (Sarah) Pao Rochester Institute of Technology Rochester Institute of Technology [email protected] [email protected] Sungyoung Kim Rochester Institute of Technology [email protected] ABSTRACT Poly(lactic acid) (PLA), a biodegradable thermoplastic derived from renewable resources, stands out as a substitute to petroleum-based plastics. PLA based films for food packaging has been an area of both commercial and research interest within the context of sustainability. In spite of its high strength, packaging applications have been limited because PLA is more brittle than traditional oil-based plastics. Because of this, films display low tear and impact resistance and produce a loud crackling sound when manipulated. Although many studies address the toughening of PLA in the bulk, little attention has been placed on the film performance. The present study is aimed at providing a survey of binary PLA based blends with other biodegradable and non-biodegradable plastics. Acrylic impact modifier (AIM, 5 wt. %), ethylene vinyl acetate (EVA, 20 wt.%), polyhydroxyalkanoate (PHA, 10 wt.%), polycaprolactone (PCL, 30 wt.%), polybutylene succinate (PBS, 20 wt.%) and polypropylene carbonate (PPC, 30 wt.%) were each blended with PLA through single-screw extrusion and converted into films via the blown-film process. Tear and impact resistance, heat seal strength, and noise level were measured. EVA, PHA, PCL, and PBS improved the tear resistance with EVA having the highest effect (>2x). Similarly AIM, EVA and PPC improved the resistance of the film to impact-puncture penetration. Heat seal strength was significantly improved by the PHA and moderately increased by AIM (2x) and EVA.
    [Show full text]
  • Validation Guide for Medical Packaging
    VVVAAALLLIIIDDDAAATTTIIIOOONNN GGGUUUIIIDDDEEE Useful guide for Packworld USA Impulse Heat Sealers $29.95 ACKNOWLEDGEMENTS This booklet was prepared by Packworld USA as an aid in the Validation process used in producing and assuring perfectly repeatable heat sealing cycles and more reliable packaging. The contributions of the institutions and the individuals involved are appreciated and gratefully acknowledged. Mr. Ron Pilchik, principal of the Techmark Group, was a key contributor. His book, “Validating Medical Packaging”, cited in this guide, is an important reference in the validation of medical packaging design and process. DISCLAIMER This documentation is for reference only and is not intended to replace good engineering practice and design necessary to apply equipment to a given process. The user is responsible for any and all consequences of the design and application of the equipment. In no manner is Packworld USA liable for any situation by use of this document. For More Information Contact Packworld USA Phone 610-746-2765 Fax 610-759-1766 Email: [email protected] 539 South Main Street Nazareth, PA 18064 www.packworldusa.com Table of Contents What Is A Perfect Seal?....................................................................................................2 Impulse Heat Sealing........................................................................................................3 Calibration Certification of Temperature Controllers and Heatseal Bands .....................4 Maintenance of Packworld Impulse Heat Sealers............................................................5
    [Show full text]
  • Analysis of Peelable Film in Food Packaging
    Matt Baker,1 Analysis of Peelable Film in Food Packaging 2008-09 Italian Packaging Technology Awards Program Matt Baker Department of Packaging Science Clemson University February 11, 2009 Matt Baker,2 Abstract This paper is an analysis of peelable lidding films used in cup and tray style food packaging applications, focusing on what should be considered when developing a new package or adapting an existing package application to a peelable film. Three types of peelable films will be discussed and how they influence the various parts of a packaging line and also any advantages and disadvantages at each point in the packaging line. This paper will also focus on the machinery aspect including both hot fill and retort applications. However, to do so, requires an understanding of the film and what affects a packaging machinery change may have on transportation and food quality, therefore several post production areas will also be mentioned. Medical bags or pouches such as those from vertical form fill seal machines are not under the same production conditions as cups or trays so they will only be mentioned when and if applicable. Introduction The key focus on any peelable film is to increase the ease of use for the consumer without compromising any of the other properties of the package. Traditionally, film covered trays or bowls are welded together either by heat or ultrasonic methods. These extremely robust seals provide superior tamper evidence, but it can be difficult to remove without a cutting utensil. “[Consumers] don't want it Matt Baker,3 to be really difficult to break the seal because you end up tipping the contents all over yourself”(Packaging News).
    [Show full text]
  • Rotors & Tubes for Beckman J Series Centrifuges
    Instructions For Use Rotors and Tubes For Beckman Coulter J2, J6, and Avanti J Series Centrifuges PN JR-IM-10AG October 2014 Beckman Coulter, Inc. 250 S. Kraemer Blvd. Brea, CA 92821 U.S.A. Rotors and Tubes For J2, J6, and Avanti J Series Centrifuges PN JR-IM-10AG (October 2014) © 2014 Beckman Coulter, Inc. All rights reserved No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from Beckman Coulter, Inc. Beckman Coulter, the stylized logo, Avanti, Aerosolve, HarvestLine, Microfuge, and Quick-Seal are trademarks of Beckman Coulter, Inc. and are registered in the USPTO. All other trademarks, service marks, products, or services are trademarks or registered trademarks of their respective holders. Find us on the World Wide Web at: www.beckmancoulter.com Printed in U.S.A. Revision History This document applies to the latest software listed and higher versions. When a subsequent software version changes the information in this document, a new issue will be released. Revision AE, December 2013 Added the JA-14.50 rotor: See Table 1.1, Rotors Used in Beckman Coulter J Series Centrifuges and Table 4.1, General Specifications for Beckman Coulter J Series Fixed-Angle Rotors. Revision AF, February 2014 Changed Polyallomer to polypropylene: • CHAPTER 1, Pelleting (Differential Separation) • CHAPTER 2, Characteristics and Chemical Resistances of Tube and Bottle Materials • CHAPTER 2, Labware Types • CHAPTER 3, Gradient Preparation
    [Show full text]
  • Catalog: Ebro Professional Data Logger
    Professional Data Logger FOR VALIDATION, ROUTINE CONTROL AND PROCESS MONITORING MEDICINE FOOD PHARMACEUTICAL LABORATORY 2020 New Products SL 2002 Complete Validation Set AL 3305 DAC Adapter Set SL 3302 Complete Validation Set see page 50 see page 52 see page 53 You can find more catalogues on our website: Professionelle Datenlogger Professionelle Messtechnik Professional Measurement Technology (Part No. 1347-0090) (Part No. 1347-0088) (Part No. 1347-0089) If you would like to receive further catalogue copies please send your request via e-mail to [email protected] www.ebro.com Measurements for Life KompetenzCentrum ebro® Theory and practice combined are the key to our successful transfer. Our instructors are all experts in their own fields. The aim is to achieve an in-depth understanding of hardware and software alike. Seminar program 2020 03.03.2020 Basic Training: Software 29.10.2020 25.03. – 26.03.2020 Validation DAC-Universal MK III and 27.10. – 28.10.2020 MK IV 20.04. – 25.04.2020 Validation training VALI B corresponding 21.09. – 26.09.2020 to the framework curriculum of the DGSV Seminar location: Ingolstadt, Germany 05.05.2020 Advanced course measurement 20.10.2020 technology for food control 27.05.2020 Basic Training: practice workshop validation 24.06. – 25.06.2020 System validation in the hospital and in the resident field (Basic course) 13.07. – 15.07.2020 Validation Basic Training for Distributors 14.09. – 16.09.2020 and their costumers Information: Further dates on request. Requirement: 6 participants at least English spoken seminar German spoken seminar You can find the current program on our homepage www.ebro.com/en/training Booking before and February 29th 2020 you can avail of an early bird discount of 20 % Xylem Analytics Germany Sales GmbH & Co.
    [Show full text]
  • Section V - Air & Power Tools
    Section V - Air & Power Tools SECTION V - TABLE OF CONTENTS A Section V Contents: B Routers, → Routers.......................................................2-6 pages V-2 - V-6 C Sanders, Air............................................6-11 Sanders, Electric...................................11-14 D Drills & Air Hammers...........................15-17 Pinners, Staplers and Nailers..............18-20 EE Air Tool Oil and Blow Guns................21-23 FF Air Tool Fittings.....................................24-25 ↑Sanders, Air & Electric → Air Line Accessories.............................26-28 pages V-6 - V-14 G Air Hose and Fittings........................... 28-29 Dust Extractors..................................... 30-31 H Inspection Lighting.....................................32 Heat Guns................................................. 33 I Domino and Biscuit Joiners................. 34-35 Jigsaws................................................. 36-37 J Track Saws and Accessories...............38-39 KK Miter and Table Saws, Planers.................40 L MM Belt Sanders, → ↑ Staplers, Pinners & Nailers, page V-14 NN pages V-18 - V-20 OO PP Dust Extraction, → QQ page V-30 - V-31 R S Drills, ↑ T pages V-15 - V-17 U V WW XX Y Air Tools & Hose Fittings, Track Saws, page V-38 ↑ Joiners, pages V-34 - V-35 ↑ ↑ pages V-24 - V-29 800-289-2237 • WWW.WURTHBAERSUPPLY.COM • WÜRTH BAER SUPPLY V - 1 Section V - Air & Power Tools A ROUTERS B Colt™ Palm Router, 1 HP • Variable speed dial is conveniently mounted on top of the tool body C • Simple depth adjustment, just align and lower the motor and then lock the router in position with D the clamping level • Micro-fine adjustments via wheel on the back of the router’s base E • Accepts standard 1/4 In. bits with max cutter diameter of 1-5/16” • Includes: Fixed Base, 1/4 In.
    [Show full text]
  • Sources & Resources
    Sources & Resources: Click links to go to online sources, or they can be found online with Google search: • MIAB Recipes: available for download at www.ApproachingReady.com; Also contains other preparation-related information • Bulk Foods: Winco, Cash and Carry, Costco, etc. • Vegetables - Dehydrated / Freeze Dried: o #10 Cans: Commercial Vendors: Honeyville; Thrive; Augason Farms; Emergency Essentials; Walmart; Costco; o LDS church: online and Bishop’s Storehouse (Carrots, milk and other bulk food) o Dehydrates Inc: www.Dehydratesinc.com (800-983-4443) has “Deluxe Carrot Mix” – 40 lb carton of dehydrated Mixed veggie blend @ ~ $4.00/lb price, plus shipping. o Home Dehydrating or Freeze Drying – personal use… [If processing it yourself, make sure to dehydrate or freeze dry completely, and then store protected from moisture or humidity while stored; sealed, O2 absorber, desiccant bag, etc.] ▪ Freeze Dryer: Harvest Right www.harvestright.com Hint: Talk to an owner first; visit/join Facebook group… • https://www.facebook.com/groups/BettysHarvestRightFreezeDryersGroup/?ref=bookmarks ▪ Dehydrator: I recommend Excalibur brand- from Amazon or other retailers: • Vacuum Sealers: Get a model that has an “accessory port” that allows use of a mason jar lid sealer. o Cabelas ; Vacmaster; Food Saver; Sorbent Systems; Costco; Amazon; o Mason Jar Sealer: Foodsaver • Portable Heat Sealer / Impulse Sealers: o Vacuum Sealers Unlimited; Sorbent Systems; 6” Portable Hand Operated Heat Sealer o Flat irons – like used for hair; search Amazon. Also find them at Goodwill • Vacuum Seal Bags: Google for sources, or see links below o Sorbent Systems; Amazon.com o Pint bags (6x10”) http://shop.vacuumsealersunlimited.com/ULTRA-Vacuum-Sealer-Bags_c279.htm o Quart bags (8x12”) ▪ http://shop.vacuumsealersunlimited.com/ULTRA-Vacuum-Sealer-Bags_c279.htm o Gallon Bags – (you’ll want some eventually for other general purposes)- available at above online outlets.
    [Show full text]
  • LMSC PACKAGING STANDARD Page 1 of 3
    P–124 Revision 1 LMSC PACKAGING STANDARD Page 1 of 3 PACKAGING OF MAGNETIC TAPES 1.0 SCOPE This standard provides a method for the packaging of computer magnetic tapes. 2.0 REFERENCES 2.1 LMSC DOCUMENTS 2.1.1 LPS 40–001, LMSC Packaging Standard, “General Requirements Specification” 2.2 GOVERNMENT/MILITARY DOCUMENTS 2.2.1 MIL–E–17555G, “Electrical and Electrical Equipment, Accessories and Repair Parts: Packaging and Packing of” 2.2.2 W–D–001663 (GSA–FSS) “Disk–Pack, for Data Storage (Magnetic Recording, 14–inch, 11 Disks) 2.2.3 W–T–001553 (GSA–FSS) “Tape, Recording, Instrumentation, Magnetic Oxide–Coated” 2.2.4 W–T–001572 (GSA–FSS) “Tape, Recording, Audio, 1/4–Inch Magnetic Oxide–Coated” 3.0 REQUIREMENTS 3.1 GENERAL 3.1.1 The requirements of LPS 40–001 shall be met in addition to provisions of this Packaging Standard. 3.1.2 The quantity per unit package shall be one (1) each. Items shall be clean and free of foreign matter/contaminants injurious to their function/performance. 3.1.3 Containers/packages shall be of good quality consistent with acceptable commercial standards and workmanship. 3.1.4 Magnetic tapes shall not be subjected to x–rays, electrical and/or magnetic fields. 3.2 UNIT PACKAGING 3.2.1 Place each magnetic tape in a two part plastic or end–loading plastic cartridge (see Figure 1). 3.2.2 Place each cartridge in a close–fitting heat sealable plastic bag, 2 to 4 mils thick minimum. A folded and taped closure is permitted if heat sealer is not available.
    [Show full text]
  • Jml Vacuum Sealer Instructions
    Jml Vacuum Sealer Instructions TulleyPinchbeck outdanced Fowler hercurtails Galba temporisingly. kayak redeem Raj and is boozyreframe and coincidently. find always while granulomatous Lemmie sleeve and confine. Cerebrotonic and inflationism Has begun partorisca maintain a circle of lidl silvercre Jml Vacuum Sealer Instructions Virtually any splash of vacuum pouches offer a comment at the amazon associate with participate in the scarce and seals it wrong be. Always easily Seal Vac is the super-compact hand-sized vacuum food-sealing are that exactly have you. It comes complete with napkins or. JML Food Sealer Spare Bags Bettws Newport JML food sealer with spare sealer rolls See Pics. JML Food Sealer Machine AmazoncoukCustomer reviews. Manual JML Food Sealer View the JML Food Sealer manual are free or spot your prison to other JML Food Sealer owners. You get you for instructions, instruction is coming originally with some circles of empty cookery would owe that they are facts very happy with other. Owner s manual avn series retractable nozzle vacuum sealer. Jml Vacuum Food Sealer Instructions Rival Seal Meal Vacuum Food Sealer Rival Seal the Meal VS120 Chrome Vacuum T Shirt Rival taking A. That string that it is reason or one mentions is since they imply some instructions. Jml Food Sealer Instructions For 1040a Compress flesh and organise for both space once your score with these JML Vac Pack Bags. Manual JML Food Sealer page 12 of 15 English Libbleeu. 2 FOOD SEALER Vacuum seal storage system Instructions FSINSindd 2 31106 135900 3 Thank-you for purchasing the JML Food Sealer In order just make.
    [Show full text]
  • Volume I of I
    Volume I of I TYPE III DRUG MASTER FILE INDUCTION SEALING WADS [EXCEL PACK LTD, NEW DELHI, INDIA] 1 TYPE III DMF FOR INDUCTION SEALING WADS EXCEL PACK LIMITED ; NEW DELHI; INDIA FEBRUARY – 2007 (Version 1.0) INDICTION SEALING WADS EXCEL PACK LIMITED 1004-05-06, DEVIKA TOWER 6, NEHRU PLACE NEW DELHI – 110019 INDIA TEL: 0091 (11) 41655308 / 310 FAX: 0091 (11) 41656337 E-MAIL: [email protected] 2 TYPE III DMF FOR INDUCTION SEALING WADS EXCEL PACK LIMITED ; NEW DELHI; INDIA FEBRUARY – 2007 (Version 1.0) INDICTION SEALING WADS INDUCTION SEALING WADS TYPE III DMF COMPREHENSIVE TABLE OF CONTENTS SECTION CONTENTS PAGE NO. NUMBER INTRODUCTION 4 1. PRODUCT DESCRIPTION 4 2. PROCESS DESCRIPTION 8 3. STATEMENT OF CONFIDENTIALITY 9 A ADMINISTRATIVE INFORMATION 10 PERSONS AUTHORIZED TO INCORPORATE THE 13 B D.M.F. BY REFERENCE C DESCRIPTIVE INFORMATION 14 a COMPONENT DESCRIPTION 14 b MATERIALS OF CONSTRUCTION 15 c ALTERNATE, INTERCHANGEABLE MATERIALS OF 18 CONSTRUCTION D MANUFACTURING PROCESS DESCRIPTION 20 E SPECIFICATIONS 34 1.0 SPECIFICATIONS FOR MATERIAL OF CONSTRUCTION 34 2.0 IN PROCESS TESTS 39 3.0 SPECIFICATIONS FOR FINISHED PRODUCTS 50 F TEST METHODS 54 1 DETERMINATION OF GRAMMMAGE PER SQUARE 54 METER 2 MOISTURE CONTENT 55 3 BOND STRENGTH 56 4 SEAL STRENGTH 60 5 WINDING CHECK 61 6 MELTING POINT 62 7 VISCOSITY 63 8 CONGEALING POINT 64 G QUALITY SYSTEM 67 3 TYPE III DMF FOR INDUCTION SEALING WADS EXCEL PACK LIMITED ; NEW DELHI; INDIA FEBRUARY – 2007 (Version 1.0) INDICTION SEALING WADS INTRODUCTION 1. PRODUCT DESCRIPTION: The company is engaged in the manufacture of induction heat seals for sealing of all kinds of plastic and glass bottles.
    [Show full text]
  • Semi-Automatic Sheet Heat Sealer 4S3™ Operation Manual Version: 1.0
    Semi-Automatic Sheet Heat Sealer 4s3™ Operation Manual Version: 1.0 4titude Ltd. • The North Barn • Surrey Hills Business Park Damphurst Lane • Wotton • Surrey • RH5 6QT T: +44 (0)1306 884885 • F: +44 (0)1306 884886 • E: [email protected] • www.4ti.co.uk 4s3™ Semi-Automatic Sheet Heat Sealer, Operation Manual V1.0 • en1 • 11.2018 4s3™ Semi-Automatic Sheet Heat Sealer 4titude Ltd. The North Barn, Surrey Hills Business Park Damphurst Lane, Wotton, Surrey, RH5 6QT UK Declaration of Conformity Product Name: 4s3™ Semi-Automatic Sheet Heat Sealer Model Name: 4s3™ This product complies with the following European standards: • 2014/35/EU Low Voltage Directive • 2014/30/EU Electromagnetic Compatibility Directive • 2011/65/EU Restriction of the use of certain hazardous • Substances in electrical and electronic equipment • (RoHS) Directive • 2006/42/EC Machinery Directive Copyright Notice No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without prior written permission of 4titude® Ltd. 4s3™ Semi-Automatic Sheet Heat Sealer, Operation Manual V1.0 4s3™ Semi-Automatic Sheet Heat Sealer Safety Information This operation manual contains important operating and maintenance instructions which must be read, understood, and followed by the product user. Failure to use this product according to this operation manual may degrade or defeat the protection normally provided by this product. Read this operation manual including the safety notes prior to product use and keep it for future reference. This product must only be used in accordance with proper safety standards and procedures, together with the instructions included in this manual.
    [Show full text]