SELECT VEHICLE PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
2 Print only the pages for your vehicle using the advanced options in the Print menu.
3 Install your Maestro RR according to the guide for your vehicle.
WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners. INSTALL GUIDE Toyota Avalon 2006-2012 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Avalon 2006-2012
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Avalon 2006-2012
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 1
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Avalon 2006-2012
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 Pink (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White or Orange (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Orange (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Violet (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Black (-) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4 INSTALL GUIDE Toyota Avalon 2013-2014 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Avalon 2013-2014
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Avalon 2013-2014
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 C- LOCATED BEHIND RADIO
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1 PINK/RED - SWI CIRCUIT 2 INPUT SWI 2 BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED ORANGE/RED - SWI CIRCUIT 3 INPUT SWI 3
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 2
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Avalon 2013-2014
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Black (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Yellow (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Blue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Pink (-) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4 INSTALL GUIDE Toyota Landcruiser Base 2008-2015 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Landcruiser Base 2008-2015
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Landcruiser Base 2008-2015
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 1
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Landcruiser Base 2008-2015
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Black (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Blue (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Pink (DATA) Behind radio
SWI Feed B ~ 20 pin 06 White (-) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4 INSTALL GUIDE Toyota Prius 2010-2011 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Prius 2010-2011
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Prius 2010-2011
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 B- LOCATED BEHIND RADIO
PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 1
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Prius 2010-2011
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Red (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Green (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Pink (-) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4 INSTALL GUIDE Toyota Prius 2012-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Prius 2012-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Prius 2012-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 C- LOCATED BEHIND RADIO
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1 PINK/RED - SWI CIRCUIT 2 INPUT SWI 2 BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 6
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Prius 2012-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Red (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Green (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Pink (-) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4 INSTALL GUIDE Toyota Prius C 2012-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Prius C 2012-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Prius C 2012-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 C- LOCATED BEHIND RADIO
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1 PINK/RED - SWI CIRCUIT 2 INPUT SWI 2
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 5
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Prius C 2012-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 Gray (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Blue (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Pink (DATA) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4 INSTALL GUIDE Toyota Prius V 2012-2014 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Prius V 2012-2014
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Prius V 2012-2014
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 C- LOCATED BEHIND RADIO
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1 PINK/RED - SWI CIRCUIT 2 INPUT SWI 2 BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 6
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Prius V 2012-2014
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Violet (DATA) Behind radio
SWI 2 B ~ 28 pin 22 LtBlue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Pink (-) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4 INSTALL GUIDE Toyota Prius V 2015-2016 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-TOY01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Toyota Prius V 2015-2016
WELCOME TABLE OF CONTENTS
Congratulations on the purchase Wiring Diagram 3 of your iDatalink Maestro RR Radio replacement solution. You are Vehicle Wire Reference Chart 4 now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 2 Toyota Prius V 2015-2016
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/RED - CANH CANH
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 WIRES FROM VEHICLE BROWN/YELLOW - CANL CANL
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
STEP 2 C- LOCATED BEHIND RADIO
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1 PINK/RED - SWI CIRCUIT 2 INPUT SWI 2 BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
STEP 3 CONNECT TO AFTERMARKET RADIO
RED GRAY/RED - ACCESSORY (+) INPUT YELLOW YELLOW - 12V (+) INPUT BLACK BLACK - GROUND
STEP 4 MAESTRO RR MODULE NOT CONNECTED G
H
A H G A
NOT CONNECTED 6
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 3 Toyota Prius V 2015-2016
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Wire Position Wire Color Polarity Description Name Color Type Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Pink (DATA) Behind radio
SWI 2 B ~ 28 pin 22 LtBlue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 White/Black (-) Behind radio
Automotive Data Solutions Inc. © 2016 ADS-RR(SI)-TOY01-DS maestro.idatalink.com 4