QUALITY MANAGEMENT SYSTEM COMPETENCE CENTER OF ROSTEC STATE CORPORATION
Rostec OUR MISSION IS:
to implement policies, approaches, generalization and transfer of Rostec State Corporation’s experience in building a quality management system of organizations.
OUR PHILOSOPHY AND VALUES: • Competence • Client-oriented approach • Trust OUR OBJECTIVES: • To ensure the implementation of a • To implement and monitor the END unified technical policy, state-of-the-art system of achieving quality-related scientific and technical development, key performance indicators by the PRODUCT to share the best practices, and Corporation’s entities guarantee the effectiveness of • To collect and analyze information standardization in quality assurance on defects and failures, as well as the ASSEMBLY • To develop a methodology to improve effectiveness of measures to eliminate SHOP the quality of military, dual-use, and the causes of their occurrence civilian industry products • To create and develop a single • To develop and coordinate the platform to exchange experience in Corporation’s product quality quality management assurance policy
LADLE, METAL, FULL-CYCLE OPEN-HEARTH CHAIN FURNACE
CONVEYOR, TESTS METAL SLABS CONFORMITY ASSESSMENT IN THE FORM OF QUALITY CONTROL AND BASIC FUNCTIONS OF PRODUCT ACCEPTANCE • Input control of raw materials at RT-TECHPRIEMKA supplier enterprises
• Supervision of technological processes for the manufacture of materials and semifinished products
• Technical acceptance of materials and semifinished products
• Control of certified production processes of materials and semi- finished products
• Quality control of materials and semi- finished products stored at supplier enterprises
• Claim and quality complaint settlement • Supervision of the development of new materials and semi-finished products and the implementation of their production at supplier enterprises
• Quality control of materials and semi-finished products supplied to enterprises to prevent the supply of counterfeit products САНКТ-ПЕТЕРБУРГ
ТВЕРЬ ЯРОСЛАВЛЬ TECHNICAL ACCEPTANCE СМОЛЕНСК СЕРГИЕВ ПОСАД МОСКВА РОСТОВ КОСТРОМА ЛЮБЕРЦЫ ЭЛЕКТРОСТАЛЬ AND REGIONAL МОЗЫРЬ ВЛАДИМИР ТУЛА КИРОВ СОЛИКАМСК REPRESENTATIVE OFFICES НИЖНИЙ НОВГОРОД ГЛАЗОВ ДЗЕРЖИНСК КРИВОЙ РОГ ПЕРМЬ ОРЕЛ АРЗАМАС НИКОПОЛЬ ЧЕБОКСАРЫ НИЖНИЙ ТАГИЛ OF RT-TECHPRIEMKA ИЖЕВСК ДНЕПРОПЕТРОВСК ЗАПОРОЖЬЕ ВОРОНЕЖ КАЗАНЬ ПЕТРОПАВЛОВСК 42 ПЕНЗА ЕКАТЕРИНБУРГ СТАРЫЙ ОСКОЛ УЛЬЯНОВСК СВЕРДЛОВСК БАЛАКОВО ТАГАНРОГ САМАРА УФА ЗЛАТОУСТ КАМЫШИН БЕЛЕБЕЙ АЗОВ ВОЛГОГРАД ЧЕЛЯБИНСК КРАСНОЯРСК БЕЛОРЕЦК КУРГАН
7 INTEGRATED SUPPLY OF PRODUCTS RT-Techpriemka provides a packaged supply of materials, semifinished products, and finished military, dual-use, and civilian industry products.
SUPPLY NOMENCLATURE: KEY PARTNERS:
• High-quality rolled stock: strip, sheet, round bar, hexagonal bar, etc. • Russian Helicopters (Stupino Machine-Building Production Enterprise JSC, Progress Arsenyev Aviation Company PJSC, • Rolled tubular products: pipes of various diameters and wall thickness Rostvertol PJSC, Ulan-Ude Aviation Plant JSC, Kumertau Aviation Production Enterprise JSC) • Ferrous and non-ferrous metallurgy: materials, semi-finished products, billets made of special kinds of steel and alloys • Uralvagonzavod Research and Production Corporation JSC
• Vessel and heat-exchange equipment: nonstandard equipment • RSK MiG JSC according to customer drawings or technical specifications • Rosatom State Corporation (FSUE NITI named after A.P. Alexandrov) • Forging: products according to customer drawings or technical specifications • United Engine Corporation (Kuznetsov PJSC, UEC-Klimov JSC)
• Technodinamika Holding (Aviaagregat JSC, Machine-Building Production Association named after I. Rumyantsev JSC)
• Engineering Technologies Research and Production Concern (Verkhneturinsky Machine-Building Plant) PRODUCTION AUTOMATION
High competition in various production areas is driving also helps to eliminate the human factor and reduce the many enterprises to introduce new technologies. Modern number of common errors, which makes it possible to industry requires a radical improvement of labour efficiency improve the process quality. Driven by the development of and production process safety using highlevel automation new technologies, production automation contributes to technologies. RT-Techpriemka offers new ways to improve the storage and processing of more data than that allowed labour efficiency and reduce financial costs. by the manual method. Through the use of this method of production engineering, several tasks can be performed in Our experience has proved that the introduction of parallel without any loss in quality and accuracy. automation in production can significantly improve labour efficiency, ensure a stable quality of products, and reduce the share of workers employed in various areas of production. Automation of various production processes boosts the speed of task performance. Additionally, it ROSTEC-CERTIFICATE CERTIFICATION CENTER
Established in 2015 by the decision of Rostec State Corporation as part of RT-Techpriemka (known as Aviatechpriemka until 2016), the Rostec-Certificate Certification Center carries out management system certification as per national and international standards and provides advanced training certificate programs in quality management, metrology, standardization, and certification. Based on the results of management system certification for compliance with national standards, the Rostec-Certificate Certification Center issues Rostec Voluntary Certification System certificate.
Based on the results of management system certification for compliance with international standards, the Rostec-Certificate Certification Center, under a licensing agreement, issues the internationally recognized Quality Austria certificate and the IQNet (International Quality Network) certificates. The Certification Center is licensed to carry out educational activities, it regularly holds both public and corporate seminars and webinars. When applying for certification services to the Rostec-Certificate Certification Center, any chief executive officer is sure to receive independent and professional evaluation of the enterprise operation, which will contribute to the enterprise achieving a higher level of development. CORPORATE HISTORY aviation materials. depended ontheuseofnew assetsdirectly military these The possibilityofcreating of new combataircraft. through the introduction improve aviation military 1999 needto qualitatively aviation faced industry the In thelate 1930s, theUSSR 1930 Acceptance”. 69-42 “On theAIPCTechnical USSR adopted Resolution No. People’s Commissars ofthe Council undertheof 11, 1940, theEconomic aircraft factories, onJanuary finished products to the quality materials andsemi- To prevent thesupplyoflow- 1940 Space Agency. the Russian Aviation and 1999, was transformed into Federation dated May 25, of thePresident oftheRussian which, basedontheDecree the Russian SpaceAgency, Enterprise was transferred to the Aviatechpriemka State No. 461 dated April23, 1999, of theRussian Federation Decree of theGovernment Organizations, approved by Enterprises and Industry of State-OwnedAviation In accordance withtheList Aviation Industry”. of theUSSR of Ministry as the“Technical Acceptance becameknownacceptance transformations, technical Later, asaresult offurther ofAviationMinistry Industry”. Acceptance oftheUSSR on thebasisof“Technical Enterprise was established the Aviatechpriemka State No. 742 dated July26, 1991, of Aviation Industry’s Order As pertheUSSR Ministry 1999 1991 products. materials andsemifinished ofaviationacceptance to thequalitycontrol and Enterprise with respect the Aviatechpriemka State thefunctionsof maintaining (FSUE Aviatechpriemka) while EnterpriseState Unitary Aviatechpriemka Federal transformed into the State Enterprise was In 2002, theAviatechpriemka 2002 requirements.certification semi-finished products to of batches of materials and confirming theconformance and actsasathird party and semi-finished products manufacturing materials technological processes of monitors compliance with the principalenterprise that of FSUE Aviatechpriemka as 16, 2006, provides for therole Supervision,” dated February Enterprises underRosprom’s Finished Products Supplied to Control ofMaterials andSemi- “On Strengthening Quality Industry’s Order No. 48 The Federal Agency for 2006 the basisofRTTechpriemka. Corporation was created on System under Rostec State for QualityManagement The Competence Center 2017 Company. RT-Techpriemka Joint-Stock company was renamed to August 30, 2016. The 2016 State Corporation. Federation to Rostechnologies transferred by theRussian Aviatechpriemka OJSC were 10, 2008, 100% oftheshares of Federation No. 1052 dated July the President oftheRussian In accordance with Decree of 2008 set. clarified andqualitytargets to qualityassurance were withrespectcompanies their holding supervising of theparent organizations The obligationsandpowers 2018 anniversary. will celebrate its 80th In 2020, RT-Techpriemka 2020