DOCSLIB.ORG

DX-4000QVP Func�Ons Control System Computer DX-4000QVP Number of S�Tch Pa�Erns 368 Number of Available Fonts 4 Bu�Onhole Automa�C (Sensor System) with Clamping Plate

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
DX-4000QVP Func�Ons Control System Computer DX-4000QVP Number of S�Tch Pa�Erns 368 Number of Available Fonts 4 Bu�Onhole Automa�C (Sensor System) with Clamping Plate List of Main Func�ons / Specifica�ons Name DX-4000QVP Func�ons Control System Computer DX-4000QVP Number of S�tch Pa�erns 368 Number of Available Fonts 4 Bu�onhole Automa�c (Sensor System) with Clamping Plate Green: Ready to start and/or while sewing. Red: Not ready to start. Start / Stop Bu�on Orange: When the lock s�tch bu�on is pressed while the sewing machine is engaged in pa�ern sewing. Maximum S�tch Speed 1,050s�/min Auto Thread Trimming Yes Automa�c Needle Threader Automa�c Needle Threader Thread Tension System Automa�c Automa�c Lock S�tch Automa�c Lock S�tch and Thread Trimming Feed Mechanism Box Feed Mechanism JUKI Smart Feed (Dual Feed Func�on) Yes Presser Foot Pressure Adjustment Stepless Adjustment (Digital) Drop Feed Yes Easy Bobbin Winding Yes Bobbin Thread Winder Bobbin Winder with Independent Motor Quick Bobbin Prepara�on Yes Bobbin Thread Counter No Feel Comfort and Power Bobbin Thread Run-Out Sensor Yes Light 6 LED Lights Func�on to Straight-Line S�tching Straight Throat Plate, Feed Dogs, and Presser Foot Professional Quality Quilting Micro-Li�er Presser Foot Pressure Se�ngs by Dial Free Arm Yes and Sewing Machine Dial System / LCD Numerical Display Change in the Length/Width of S�tches S�tch Width: Max. 7mm S�tch Length: Max. 5mm Number of Needle Posi�on 37 / According to Pa�ern (Straight S�tch/Other Than Straight S�tch) Pa�ern Reverse Up / Down and Le� / Right Twin Needle Sewing Yes (Twin Needle is Op�on) Elonga�on Pa�ern Yes Adjustable Star�ng / Reverse S�tch Speed Yes Needle Up/Down Bu�on Yes Low-Speed Inching Sewing Yes Needle Stop Posi�on Switching Yes Presser Foot Pivot Func�on Yes Save/Call of Pa�erns 10 pa�erns Horizontal Presser Foot Holder Bu�on Yes Bu�on system: 6・8・10mm / 12mm Height of Li� of Presser Foot Lever system: 6mm / 12mm (1 Step / 2 Steps) Knee-li�ing Lever system: 6・8・10mm / 12mm Lock Mode Yes Opera�on Guide Displayed as Anima�on, Illustra�ons, and Text Standard Accessories Sewing Machine Cover So� Cover with Accessory Storage Auxiliary Bed Yes Knee Li� Lever Yes Wide Table Yes Foot Controller Yes (with Separate Foot Switch) Accessory Box Yes Standard Presser Foot (A) / Straight Presser Foot(S) / Zipper Presser Foot (B) / Overcas�ng Presser Foot (C) / Blind S�tch Presser Foot (D) / Bu�onhole Presser Foot (E) / Manual Bu�onhole Presser Foot (I) / Open Toe Presser Foot (O) / Patchwork Presser Foot (P) / Accessories 1/4” Guide Foot / Quilt Presser Foot (For Ruler) (Q) / Edge Sewing Presser Foot (R) / Zigzag Free Mo�on Quil�ng Set (Quilt presser foot (zigzag type) / Presser Foot Holder Setscrew / Adapter Shank / Needle Setscrew / Straight Throat Plate / Straight Feed Dog / Bobbin (4) / Needle Set HA X 1 # 11 (1): # 14 (1): # 16 (1): for knit # 11 (1) / Quilt Guide / Auxiliary Spool Pin / T-Shape Screwdriver / Ripper / Cleaning Brush / Spool Cap (Large) / Spool Cap (Middle) / Spool Cap (Small) / Foot Controller / Knee Li� Lever / Power Cord / Wide Table / Sewing Machine Cover / Quick Reference Guide / Accessory Box Specifica�ons Dimensions 23.7”(W)×12”(H)×10.4”(D) Arm Size 12”(W)×4.7”(H) Weight 32.8lbs DX-4000QVP Kokochi means “ good feeling “ in Japanese 2009 ser-Focused Operability U Visualization of NEW Adjustment Values Changes in adjustments can be visualized with animations. Adjust the thread tension by sliding your color touch panel can be operated nger over the scale in the touch panel. like a smartphone 7” Thread Tension (Weaker) Just like on a smartphone or tablet, intuitively select and edit patterns, change various settings, and view operation videos. With he most important and frequently used operations available, the layout and user friendliness of icons, etc., are revolutionary. Thread Tension (Stronger) The animation changes according to the adjustment value. Store Recall Stitch Patterns NEW The last 10 stitches are stored in the history. DX-4000QVP Change Color Temperature View illustrations of stitch patterns in the The settings that differ from of Lights NEW history to easily identify and select them the defaults are highlighted with a single touch. in blue. Adjust the Presser Foot Pressure NEW With the Easily Accessible Dial Notification Before In addition to the popular stitch width and NEW length adjustments, easily adjust the Bobbin Thread Runs Out presser foot pressure with a dial below the Daylight touch panel. Being able to change the An optical sensor will notify you presser foot pressure while sewing allows when the bobbin thread reaches a Have your Favorite Accessories you to immediately respond to unexpected certain amount. Sew with condence Always at Hand NEW fabric feeding issues. without worrying about the remaining amount of bobbin thread. The auxiliary bed with accessory storage is the rst among sewing machines with a 12" workspace. Keep your Soft White most often used accessories in Before Adjustment After Adjustment their place and at your Adjust the color temperature of the bulb between daylight and soft Sew stretchy fabrics evenly like knits, ngertips. white. This eliminates visibility difculties with certain fabric and eece, and more by adjusting the presser thread color combinations. foot pressure. Expanded custom sewing Make Sewing More Pleasant JUKI Smart Feed More convenience with 7" LCD and animations! (Built-In Dual Feed Unit) Explore JUKI’s Online World with JUKI Sewing Net! NEW Using JUKI Smart Feed allows you to reduce uneven feeding and stretched stitching of thin fabric. Feeding Connect to the internet to access JUKI can be stabilized simply by lowering the unit. Sewing Net from your sewing machine! From the Sewing Net, you can access 4.7” (120mm) JUKI's homepage where you may view projects, product information, and 12.0” (305mm) more. In addition, you can watch 13.5” (343mm) 22.4” (570mm) instructional videos of projects and/or sewing machines from JUKI's YouTube channel. With built-in WiFi capabilities, the online JUKI’ s sewing world is yours to explore from your machine screen! Easily Switch to Straight Stitch Sewing View YouTube Videos Browse JUKI’s Website By switching the machines throat plate and feed dogs to straight stitch, you can sew edges and sharp curves. Additionally, with this JUKI Sewing Net allows JUKI Sewing Net allows set up, you can prevent fabrics from being pushed into the needle you to view videos from you to also visit the hole when you begin sewing. your sewing machine! JUKIQuilting.com web Follow step-by-step page to view projects, You can easily change the presser foot, feed dog and throat plate to straight tutorials while sewing to events, the latest JUKI stitch versions. create beautiful projects news, product information or learn a new technique. and more. Straight Throat Plate Straight Feed Dog Enjoy More Variations & Applications with Tapering NEW Increased ranges of the angle and direction settings have expanded the possibilities for sewing tapering. You can select the angle and direction for the sample beginning and end of tapering. You can set a stitch By using the memory and inversion functions, length in advance or star-shaped appliqués can be beautifully nished. store the length of the You can view an instructional video on your smartphone by Select the title of the operating procedure that you want to view stitches that were sewn. scanning the QR code of the operating procedure. and follow the step-by-step instructions show in animated video. Ingenuity to create Various Presser Foot Lift Functions Easily Combine & Recall Patterns Micro-Lift Function Smartphone-like touch panel Create multiple variations Using the presser foot operations make it very easy to from a single pattern, such as pressure dial, you can raise combine one-point patterns and combining vertical and the presser foot slightly to characters. You can also recall horizontal inversions. prevent uneven feeding (up to 10) previously created and achieve a beautiful When micro-lifter patterns after viewing them on nish when sewing function is used the screen. quilts, velvet, and other fabrics. When micro-lifter function is not used Optional Accessories Automatic Lowering of Feed Dog Pivot Function Easy positioning at the beginning of sewing with the cross LED pointer LED Pointer Mounting Base The feed dog lowers automatically when the This allows you to easily change the sewing direction presser foot is raised to the extra lift position with while leaving both hands on the fabric, for example, the knee lifting lever. This prevents the fabric when sewing corners of appliqués. It automatically from getting caught on the feed dog and allows raises the presser foot when sewing is stopped the fabric to be taken in and out smoothly. with the needle in the lower position. With the LED pointer, you can Expand your The mounting base allows start sewing without lowering creativity with the you to attach the LED the needle to check the sewing LED pointer as a pointer, scope, and Beautiful Buttonholes Smooth Free Motion Sewing start position.You can also guide when aligning magnifying lens attach a borescope camera rows of patterns for Easily share images and videos you attachment to the sewing instead of the LED pointer. sewing. are sewing to social media machine. *Please purchase a commercially Part No. 40247205 Part No.40247204 available borescope camera. Thick Thread Decoration Enjoy more Specialty/Low Tension Bobbin Case three-dimensiona Optimize your bobbin tension for bobbin l decorations with work, free motion quilting and/or thread thick threads or painting with our specialty/low tension ribbons. bobbin case. Part No. 40247203 Buttonhole sewing with clamping plate and sensor Transparent quilt presser foot makes the needle visible.
Load more

Recommended publications
  • G Machines BERNINA®/Bernette® Sewing Machines Mastering Your BERNINA® Table of Contents
    BERNINA®/bernette® Sewing Machines BERNINA®/bernette® Sewing Machines Mastering Your BERNINA® Table of Contents Class 1 - General Information ..................................................................3 Introduction ...................................................................... ................................. 4 Meet Your Feet .............................................................................. ................... 5 Sewing Machine Needles ........................................................................... ...... 6 Thread ............................................................................ .................................. 8 Stabilizers & Interfacings ...................................................................... ........... 10 Samples............................................................................ ............................... 12 Product Reference List .............................................................................. ...... 30 Class 2 - Practical Stitching ....................................................................31 Seam Samples ........................................................................... ..................... 32 Hem and Edging Samples ........................................................................... .... 40 Product Reference List .............................................................................. ...... 52 Class 3 - More Practical Stitching...........................................................53 Elastic Samples
    [Show full text]
  • GXT Series Catalog
    GXT3200 : DRY-HEAD type, variable top feed, safety stitch machine GXT5200 : DRY-HEAD type, variable top feed, overedger To Feed Machine and TopTopp FeedFeed MachineMachine andand Dr Head Technolo gy DryDryy HeadHead TechnologyTechnology 1 GXT3200 series common specifications DRY-HEAD type,variable top feed, safety stitch machine Stitch length adjustment ： Push-button Differential feed ratio adjustment ： Lever with micro-adjustment Maximum speed ： 6,000 sti/min※ Lubrication ： Grease and automatic GXT5200 series common specifications DRY-HEAD type,variable top feed, overedger Stitch length adjustment ： Push-button Differential feed ratio adjustment ： Lever with micro-adjustment Maximum speed ： 6,000 sti/min※ Lubrication ： Grease and automatic ※Depends on subclasses and sewing conditions Grease lubrication State-of-the-art grease lubrication technology has been employed for the “needle bar mechanism” , “upper looper mechanism” and “top feed mechanism” . A dry-head type machine protects your important sewn products against oil stains. The dry head system has been employed for the “top feed mechanism” for the first time in the industry. eco This feature reduces oil stains on sewn products, decreasing the use of stain remover. The The GXT series is a reliable sewing machine that creates a industry's clean work environment and contributes to global environmental first protection. Max speed 6,000 sti/min A dry-head type machine reaches a maximum machine speed of 6,000 sti/min※. The machine that contributes to increases in production. Top feed mechanism ※Depends on subclasses and sewing conditions 2 CloseCloce up up High quality products achieved High quality by accurate top and bottom feeding The top and bottom feed dogs feed the fabric accurately, producing high-quality products with no plyshift and/or twist.
    [Show full text]
  • The Buttonhole Attachment the Buttonhole Attachment Is a More Sophisticated Zig-Zag Foot
    Replacing the Feed-dogs: The Buttonhole Attachment The buttonhole attachment is a more sophisticated zig-zag foot. This attachment is also a walking-foot with its own feed-dogs and, like the Singer zig-zag attachment, a cover-plate is needed to stop the sewing machine’s feed-dogs being active on machines that cannot drop their feed-dogs. Figure 28 Figure 29 Figure 28 shows the left side of the attachment; it is complete except that its cover has been removed, and Figure 29 shows the left side of the attachment with the wing-nut 5 and the covering disk removed. The zig-zag cam 1 makes the small zig-zag stitches that form the buttonhole, and the buttonhole cam 2 moves the feed-dogs 3 to form the buttonhole. Because the gap in the feed-dogs is necessarily very large, an additional finger 4 is used to ensure the material does not move. The wing-nut 5 can be used to position the attachment before starting to sew. Under the wing-nut there is a three-tooth wheel 6 that rotates with the buttonhole cam 2. It moves the double-sided rack 7 which is linked to the buttonhole length adjustment 8. The base plate 10 is loose, Figure 30. It is held in position by the plate and screw 11, by the fingers 13 and 14 and by the rod at 8. The slots in the base plate allow it to move backward and forward, and the wide slot allows it to move sideways. As shown in Figure 31, the pieces 7, 8 and 9 (Figure 29) form a lever pivoted to the body 12 at the Figure 30 fulcrum 9.
    [Show full text]
  • Husqvarna Presser Foot Guide
    Husqvarna Presser Foot Guide ShiveringJet-propulsion Erl sometimes and unsicker roup Gary any grapplemonochromes her memberships readdress laughingly.subscribed Shepardor intertangles splays tolerably. restrainedly? Get the feed dogs to match rows of our videos may be a husqvarna presser feet that include sewing You otherwise want to ripple the Pfaff Quilt Binder because it comes with a human foot included in addition box. Make sure you remove the masking tape and clean the foot after use. As an engineer, making seams on caps, remove the bobbin and worse till you see also hook. Husqvarna Viking Sewing Machine Feet jaycottscouk. There its an error. Elna Supermatic Duracel. The links in the PDF are clickable! The manual for the Pfaff Quilt binder does not fit the Viking H class machine. Sometimes you may have to push the button in and out several times to get all the gunk out of the way before it will let you sew in reverse again. A sewing machine is target machine used to sew better and materials together the thread Sewing machines were invented during he first Industrial Revolution to decrease this amount in manual sewing work. And most people associate it with stitch in the ditch quilting. Down to activate the conquest down. Effortlessly creates small tucks in your fabric. Lightweight woven fabric from appletree quilting is easy to various singers i do not fit, there are husqvarna presser foot guide which gives greater visibility for quilting. CLEAR VIEW 14 inch another FOOT STRAIGHT slim Fit most. Husqvarna Viking Sewing Machine can Sew Blessed. Push the Changeable Decorative Guide Foot upwards so that it snaps into place.
    [Show full text]
  • SEWING MACHINE FEATURES What It Is What It Does
    SEWING MACHINE FEATURES What it is What it does Carries lower thread, drops horizontally into machine from an opening in front of needle (amount of Bobbin, thread in bobbin is easily visible), or is loaded into a removable metal bobbin case that is inserted vertically drop-in or vertical into front of machine. It is easier to adjust bobbin tension in a bobbin case than in a drop-in. Some machines feature a low bobbin warning. Adjustable Feed dogs in raised position move fabric under presser foot. Dropped feed dogs give sewer control feed dogs over movement of fabric under the needle; useful for darning and free-motion embroidery. Some machines S (fabric teeth) without adjustable feed dogs provide a cover to prevent teeth from moving the fabric. PART Foot control Supplies power to the machine like a gas pedal does to a car: starts, stops, and sets speed. Some foot (foot pedal) controls have other features like half stitch, full stitch, and needle lift, which are activated by tapping the control. LCD panel Displays stitch selections, settings, and other information applicable to the machine. ACHINE M Sewing surface, The flat area around the needle plate, which supports the fabric. It consists of a free arm (a projecting extension, and arm over which narrow, tubular items can be pulled for easier sewing), and one or more tablelike extensions free arm that snap on around the free arm to increase surface area. Some machines do not include extensions. Metal plate in sewing surface, below presser foot. Contains openings for feed dogs and for needle Throat plate to meet the bobbin hook below.
    [Show full text]
  • Janome 525S Manual
    Janome 525S Sewing Machine Instruciton Manual Janome 525S Instruction Manual JanomeFlyer.com Model 525S www.janomeflyer.com 525S Owners Manual/ User Guide Janome 525S Sewing Machine Instruciton Manual IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the followings: Read all instructions before using this appliance. DANGER— To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. 2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 15 Watts. WARNING— To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not allow children to play with the machine. The machine is not intended for use by children or infirmed persons without proper supervision. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. 2. Use this appliance only for its intended use as described in this owner’s manual. Use only attachments recommended by the manufacturer as contained in this owner’s manual. 3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine and foot controller free from accumulation of lint, dust and loose cloth.
    [Show full text]
  • Basic Parts of a Sewing Machine
    PARTS OF A SEWING MACHINE Don't let all the wizbangery of modern sewing machines scare you off. Basic sewing is simple. You'll be surprised at what you can accomplish with just an afternoon of practice. Today's sewing machines maximize your sewing experience with their ease of operation, and professional results. The parts of a sewing machine are easy to identify. I can get out my pointer if you'd like. Models and makes of sewing machines differ in layout and features, but the basic parts are similar. Your machine's manual should show a detailed diagram of your specific model. If you don't have a manual, check the manufacturer's website. Often, manuals can be found online and downloaded. Consult your machine's manual for specific instructions on use and care. PARTS OF A SEWING MACHINE 1. Spool pin: Holds a spool of thread. 2. Bobbin winder spindle: Bobbin is placed here during winding. 3. Bobbin winder stopper: Stops winding the bobbin when it reaches capacity. 4. Stitch width dial: Controls the width your stitch. It is used to create a zigzag stitch. 5. Pattern selector dial: Turn the pattern selector dial to set the symbol of the desired stitch pattern. On computerized machines, stitches are usually selected on a menu screen. 6. Hand wheel: The large knob on the right side of your machine. Manually raises and lowers the needle. 7. Stitch length dial: Controls the length of the stitch. Shorter stitches for finer fabrics, longer for heavier fabrics, basting and gathering. 8. Reverse stitch lever: The machine will sew in reverse while the lever is pushed.
    [Show full text]
  • COMPARISON CHART Innov-Ís 40 Sewing Features INNOV-ÍS 80 INNOV-ÍS 40
    COMPARISON CHART Innov-ís 40 Sewing Features INNOV-ÍS 80 INNOV-ÍS 40 Maximum sewing speed (stitches per minute) 850 850 Needle threading system Super easy Super easy LCD monochrome display Display control panel LCD 1.26" x 3.8" Change pattern length Change pattern length Customized decorative stitch settings and width and width Combine multiple Combining stitch patterns decorative stitch patterns — Number of built-in stitches (includes buttonhole styles) 80 40 Buttonhole styles 10 5 Built-in alphabets 10 Stitch width Up to 7mm Up to 7mm 40 Stitch, Computerized Stitch length Up to 5mm Up to 5mm Sewing Machine Stitch selection 10-key touch panel Dial Sewing workspace Wide table optional Wide table optional Marked in centimeters Marked in centimeters Needle plate measurements and inches and inches Innov-ís 80 Memory capability 3 memory slots — Feed dogs 77 Stitch selection panel Quick reference stitch guides At-a-glance stitch locator on machine Work lights Bright Bright Upper thread tension system for perfect Manual Manual stitches on any fabric TM Quick-Set bobbin • • Drop the bobbin in and start sewing Needle up/Needle down •• Twin needle •• FPO Needle positions 14 14 Introducing the Project Runway Limited Edition Quilting Features Innov-ís 40 and Innov-ís 80 80 Stitch, Computerized Presser foot leveling for easy stitching over Sewing Machine changing fabric thicknesses •• Drop feed function •• Built-in quilting stitches •• Key: • Feature included — Feature not included The Official SEWING & EMBROIDERY LICENSEE of Project Runway For more information, call 1.800.4.A.BROTHER or visit our website at www.brother.com.
    [Show full text]
  • Great Scott! "An Apple a Day..."
    By Scott Goodman Scott Goodman, owner of Sewing Machine Warehouse & Kneedle.com has been servicing the sewing public since 1976. Fight the urge to put oil on things. With a few exceptions, though quieter, oil rarely makes your machine sew better. Manufacturers are An Apple specific about where to oil and what kinds of lubricants are used in your machine. Some machines use several different lubricants. Generally, machines with a metal bobbin case have races that need lubrication and should a Day... be oiled sparingly. Machines with synthetic bobbin cases An Apple a Day, keeps the doctor away, Stitch in Time should not. saves nine. How are you preventing unexpected repairs on your embroidery machine? Here are Terminology alert: Race, it is the groove or channel some tips that will keep your machine running that rotary or oscillating parts move in. Please smoothly until its next checkup. consult your owner’s guide for specifics. Contrary to an anecdote I heard at a craft show, lint from recent projects will not keep your Sticky Hoops? Over time, spray adhesive machine warm and cozy. So, let’s roll up our sleeves, can build up; turning your hoops into untouchables. If don our safety glasses and perform some between- the sticky buildup is light, use a moist diaper wipe. For service maintenance. heavier gunk, spray your hoops with WD40® or similar lubricant. Let the lubricant work its magic for a few minutes and wipe away the goopy buildup with a rag or Remove the bobbin cover, paper towel. bobbin case and needle plate from your machine in Thread grooves, rough whatever order is right for edges and nicks can trap your model.
    [Show full text]
  • NGOSEW.COM SAMPLE FEED DOGS E-MAIL : [email protected] Http :
    NGOSEW.COM SAMPLE FEED DOGS E-MAIL : [email protected] http : // www.ngosew.com ITEM:12436 ITEM:12481 ITEM:143174 FEED DOG WITH 12 TEETH FEED DOG WITH 17 TEETH FEED DOG WITH 17 TEETH ITEM:149031 ITEM:149057 ITEM:149062 FEED DOG WITH 19 TEETH FEED DOG WITH 22 TEETH FEED DOG WITH 16 TEETH ITEM:149159 ITEM:149165 ITEM:52031 FEED DOG WITH 16 TEETH FEED DOG WITH 18 TEETH FEED DOG WITH 19 TEETH NGOSEW.COM SAMPLE FEED DOGS E-MAIL : [email protected] http : // www.ngosew.com ITEM:240112 ITEM:240147 ITEM:264510 FEED DOG FITS SINGER 111W FEED DOG FITS SINGER 111W FEED DOG FITS SINGER 11W (NO.40 NEEDLE HOLE FOR (NO.38 NEEDLE HOLE FOR (WITH LONG SLOT) SIZE 20 & 22 NEEDLES) SIZE 23 & 24 NEEDLES) ITEM:541647 ITEM:541734 ITEM:18031 FEED DOG FITS SINGER 20U FEED DOG FITS SINGER 20U FEED DOG FITS CONSEW 18 ZIG ZAG STRAIGHT STITCH SINGER 16-188 ITEM:45788 ITEM:2110225-223-D ITEM:417920 FEED DOG FITS SINGER 15-88 FEED DOG FITS TOYOTA FEED DOG FITS SINGER 105L, 15-90, 201, 221 135L NGOSEW.COM SAMPLE FEED DOGS E-MAIL : [email protected] http : // www.ngosew.com ITEM:417919 ITEM:503734-N ITEM:12481-9T FEED DOG FITS SINGER FEED DOG FITS SINGER FEED DOG FITS SINGER,JUKI 457A125L 547G 105, 115, 457U105 BROTHER SEWING MACHINE ITEM:12481-13T ITEM:12481-15T ITEM:12481-17T FEED DOG FITS SINGER,JUKI FEED DOG FITS SINGER,JUKI FEED DOG FITS SINGER,JUKI BROTHER SEWING MACHINE BROTHER SEWING MACHINE BROTHER SEWING MACHINE ITEM:12481-19T ITEM:12481-21T ITEM:12481-22T FEED DOG FITS SINGER,JUKI FEED DOG FITS SINGER,JUKI FEED DOG FITS SINGER,JUKI BROTHER SEWING MACHINE BROTHER SEWING
    [Show full text]
  • Direct-Drive High-Speed Lockstitch Sewing Machine with X-Feed Doppelsteppstich-Schnellnäher Mit Direktantrieb Und X-Feed
    DIRECT-DRIVE HIGH-SPEED LOCKSTITCH SEWING MACHINE WITH X-FEED DOPPELSTEPPSTICH-SCHNELLNÄHER MIT DIREKtaNTRIEB UND X-FEED EN Technical Data GC6760-X DE Technische Daten GC6760-X • Stitch type 301 • Stitchtyp 301 • Max. sewing speed 4,500 spm. (GC6760-X-MD3) • Max. Nähgeschwindigkeit 4.500 Stiche / Min. (GC6760-X-MD3) • Max. stitch length 9 mm • Max. Stichlänge 9 mm • Max. fabric clearance 16 mm with knee lever • Max. Durchgang unter dem Nähfuß 16 mm mit Kniehebel • Adjustable take-up lever (58–62 mm) to optimize the • Verstellbarer Fadenhebel (58–62 mm) zur optimalen stitch quality on different materials (high-flexible) Anpassung an unterschiedliche Materialien (hochflexibel) • X-FEED: • X-FEED: Needle feed & alternating drop feed (patent applied) Nadel- & alternierender Untertransport (zum Patent angemeldet) Automatic enclosed lubrication system Automatisches geschlossenes Schmiersystem Clearance under the arm Durchgangsraum im Nähmaschinenarm 300×136 mm 300×136 mm Carton dimensions and gross weights for sewing head Kartonmaße und Brutto-Gewichte für Nähkopf 70×36×68 cm, 59 kg 70×36×68 cm, 59 kg ° Option: ° Option: Automatic presser foot lift Automatische Nähfüßlüftung Specifications can differ depending on model Angaben können je nach Ausführung abweichen. 301 134/DP×5 6760-X- A • • 4.5 65-80 • 240–140 • • • ° L 4,500 33 MD3- 134/DP×5 B • • 80-120 • 120–80 • • • ° M 6/16 134/DP×5 6760-X- C • • 9 120-140 • 60–50 • • • ° H 3,200 35 HD3- 134/DP×5 D • • 140-160 • 40–30 • • • ° XH Certificate of the international ISO9001 XI´AN TYPICAL EUROPE GmbH Certificate of the Hertelsbrunnenring 9 ISO14001 D-67657 Kaiserslautern Tel.: +49 (0)631 316019-0 Certificate of the international CE Fax: +49 (0)631 316019-11 Certificate for E-mail: [email protected] Ecolabelling Product www.typical-europe.com Certificate for Energy Conservation Product X-FEED – en/de 05-2013 EN The innovation DE Die Innovation The split bottom feed for needle feed machines.
    [Show full text]
  • Hzl-Nx7 Hzl-Nx7
    List of main functions/specifications Name Function explanation HZL-NX7 HZL-NX7 Functions Control System Computer Computer Number of stitch patterns Number of pre-programmed stitch patterns 351 Number of available fonts Number of aiphabetick/numeric fonts 4 Buttonhole Buttonhole sewing system Automatic (sensor system) with clamping plate Green: Ready to start and/or while sewing Red: Not ready to start Start/stop button Variable start/stop button color to indicate the state of the sewing machine Orange: When the lock stitch button is pressed while the sewing machine is engaged in pattern sewing. Maximum stitch speed Maximum number of vertical movements the needle can make per minute 1,050sti/min Auto thread trimming Automatic simultaneous needle thread and bobbin thread cutting X The Next Automatic needle threader Automatic needle-threading Automatic needle threader Thread tension system Needle/bobbin thread tension adjustment system Automatic Automatic lock stitch Automatic reverse stitch/lock stitch at the start/end of sewing Automatic lock stitch and thread trimming Feed mexhanism Number of feed dogs and fabric feeding system Box Feed mechanism Dual feed function For sewing shirring, etc., and preventing bunched stitching X Generation Presser foot pressure adjustment Adjustable presser foot pressure Stepless adjustment (digital) Drop feed Retractable feed dogs for free motion and button-stitching X For bobbin winding simply by winding thread around the bobbin without passing X through the hole in the bobbin Bobbin thread winder Bobbin
    [Show full text]