THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered As a Newspaper at the G.P.O.)

SPECIAL ISSUE

THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered as a Newspaper at the G.P.O.)

Vol. CXXII—No. 65 NAIROBI, 9th April, 2020 Price Sh. 60

GAZETTE NOTICE NO. 3095 KS ISO 385:2005 Kenya Standard — Laboratory glassware — Burettes, First Edition THE STANDARDS ACT KS ISO 7086-1:2019 Kenya Standard — Glass hollowware in contact (Cap. 496) with food — Release of lead and cadmium — Part 1: Test method, Second Edition DECLARATION OF KENYA STANDARDS KS ISO 4796-1:2016 Laboratory glassware — Bottles — Part 1: PURSUANT to section 9 (1) of the Standards Act, the National Screw-neck bottles, Second Edition Standards Council declares the specifications or codes of practice appearing in the schedule hereto to be Kenya Standards with effect Electrotechnical from the date of publication of this notice. KS IEC 60598-2-17:2017 Kenya Standard — Luminaires — Part 2- Number Title of Specification or Code of Practice 17: Particular requirements — Luminaires for stage lighting, television and film studios Chemical (outdoor and indoor), Second Edition KS ISO 10545-15:1995 Kenya Standard — Ceramic tiles — Part 15: KS IEC 60598-2-20:2014 Kenya Standard — Luminaires — Part 2- Determination of lead and cadmium given off 20: Particular requirements — Lighting chains, by glazed tiles, First Edition Second Edition KS ISO 10545-16:2010 Kenya Standard — Ceramic tiles — Part 16: KS IEC 60598-2-2:2011 Kenya Standard — Luminaires — Part 2-2: Determination of small colour differences, First Particular requirements — Recessed luminaires, Edition Second Edition KS ISO 10545-14:2015 Kenya Standard — Ceramic tiles — Part 14: KS IEC 60598-2-3:2011 Kenya Standard — Luminaires — Part 2-3: Determination of resistance to stains, Second Particular requirements — Luminaires for road Edition and street lighting, Second Edition KS ISO 10545-13:2016 Kenya Standard — Ceramic tiles — Part 13: KS IEC 60598-2-22: 2017 Kenya Standard — Luminaires — Part 2- Determination of chemical resistance, Second 22: Particular requirements — Luminaires for Edition emergency lighting, Second Edition KS ISO 10545-8:2014 Kenya Standard — Ceramic tiles — Part 8: KS IEC 60598-2-4:2017 Kenya Standard — Luminaires — Part 2-4: Determination of linear thermal expansion, Particular requirements — Portable general Second Edition purpose luminaires, Second Edition KS ISO 10545-9:2013 Kenya Standard — Ceramic tiles — Part 9: KS IEC 60598-2-5:2015 Kenya Standard — Luminaires — Part 2-5: Determination of resistance to thermal shock, Particular requirements — Floodlights, Second Second Edition Edition KS ISO 14644-3:2019 Kenya Standard — Cleanrooms and associated KS IEC 60598-2-8:2013 Kenya Standard — Luminaires — Part 2-8: controlled environments — Part 3: Test Particular requirements — Handlamps, Second methods, First Edition Edition KS ISO 14644-16:2019 Kenya Standard — Cleanrooms and KS IEC 60598-2-24:2013 Kenya Standard — Luminaires — Part 2- 24: Particular requirements — Luminaires with associated controlled environments — Part 16: limited surface temperatures, Second Edition Energy efficiency in cleanrooms and separative devices, First Edition KS IEC 62612:2018 Kenya Standard — Self-ballasted LED lamps for general lighting services with supply voltages > KS ISO 3819:2015 Kenya Standard — Laboratory glassware — 50 V — Performance requirements, Second Beakers, Second Edition Edition

[1683 168416841:40 PM THE KENYA GAZETTE 9th April, 2020

KS IEC 61000-3-2:2018 Kenya Standard — Electromagnetic KS IEC 60335-2-36:2017 Kenya Standard — Household and similar compatibility (EMC) — Part 3-2: Limits — electrical appliances — Safety — Part 2-36: Limits for harmonic current emissions Particular requirements for commercial electric (equipment input current ≤16 A per phase), First cooking ranges, ovens, hobs and hob elements, Edition First Edition KS IEC 62504:2018 Kenya Standard — General lighting — Light KS IEC 60335-2-39:2017 Kenya Standard — Household and similar emitting diode (LED) products and related electrical appliances — Safety — Part 2-39: equipment — Terms and definitions, First Particular requirements for commercial electric Edition multi-purpose cooking pans, First Edition KS IEC 62321-1:2013 Kenya Standard — Determination of certain KS IEC 60335-2-9:2019 Kenya Standard — Household and similar substances in electrotechnical products — Part electrical appliances — Safety — Part 2-9: 1: Introduction and overview, First Edition Particular requirements for grills, toasters and similar portable cooking appliances, First KS IEC 62321-3-1:2013 Kenya Standard — Determination of certain Edition substances in electrotechnical products — Part 3-1: Screening — Lead, mercury, cadmium, KS IEC 60335-2-35:2016 Kenya Standard — Household and similar total chromium and total bromine by X-ray electrical appliances — Safety — Part 2-35: fluorescence spectrometry, First Edition Particular requirements for instantaneous water heaters, First Edition KS IEC 60335-1:2016 Kenya Standard — Household and similar electrical appliances — Safety — Part 1: KS IEC 60335-2-4:2017 Kenya Standard — Household and similar General requirements, First Edition electrical appliances — Safety — Part 2-4: Particular requirements for spin extractors, First KS IEC 60335-2-88:2002 Kenya Standard — Household and similar Edition electrical appliances — Safety — Part 2-88: KS IEC 60335-2-24:2017 Kenya Standard — Household and similar Particular requirements for humidifiers intended electrical appliances — Safety — Part 2-24: for use with heating, ventilation, or air- Particular requirements for refrigerating conditioning systems, First Edition appliances, ice-cream appliances and ice- KS IEC 60335-2-8:2015 Kenya Standard — Household and similar makers, First Edition electrical appliances — Safety — Part 2-8: KS IEC 60335-2-89:2019 Kenya Standard — Household and similar Particular requirements for shavers, hair clippers electrical appliances — Safety — Part 2-89: and similar appliances, First Edition Particular requirements for commercial KS IEC 60335-2-26:2008 Kenya Standard — Household and similar refrigerating appliances and ice-makers with an electrical appliances — Safety — Part 2-26: incorporated or remote refrigerant unit or Particular requirements for clocks, First Edition motor-compressor, First Edition KS IEC 60335-2-80:2015 Kenya Standard — Household and similar KS IEC 60335-2-31:2018 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-80: electrical appliances — Safety — Part 2-31: Particular requirements for fans, First Edition Particular requirements for range hoods and other cooking fume extractors, First Edition KS IEC 60335-2-13:2016 Kenya Standard — Household and similar KS IEC 60335-2-15:2016 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-13: electrical appliances — Safety — Part 2-15: Particular requirements for deep fat fryers, Particular requirements for appliances for frying pans and similar appliances, First Edition heating liquids, First Edition KS IEC 60335-2-28:2008 Kenya Standard — Household and similar KS IEC 60335-2-47:2017 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-28: electrical appliances — Safety — Part 2-47: Particular requirements for sewing machines, Particular requirements for commercial electric First Edition boiling pans, First Edition KS IEC 60335-2-38:2017 Kenya Standard — Household and similar KS IEC 60335-2-49:2017 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-38: electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric Particular requirements for commercial electric griddles and griddle grills, First Edition appliances for keeping food and crockery warm, KS IEC 60335-2-42:2017 Kenya Standard — Household and similar First Edition electrical appliances — Safety - Part 2-42: KS IEC 60335-2-53:2017 Kenya Standard — Household and similar Particular requirements for commercial electric electrical appliances — Safety — Part 2-53: forced convection ovens, steam cookers and Particular requirements for sauna heating steam-convection ovens, First Edition appliances and infrared cabins, First Edition KS IEC 60335-2-2:2019 Kenya Standard — Household and similar KS IEC 60335-2-56:2014 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-2: electrical appliances — Safety — Part 2-56: Particular requirements for vacuum cleaners and Particular requirements for projectors and water-suction cleaning appliances, First Edition similar appliances, First Edition KS IEC 60335-2-30:2016 Kenya Standard — Household and similar KS IEC 60335-2-59:2009 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-30: electrical appliances — Safety — Part 2-59: Particular requirements for room heaters, First Particular requirements for insect killers, First Edition Edition KS IEC 60335-2-5:2018 Kenya Standard — Household and similar KS IEC 60335-2-67:2016 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-5: electrical appliances — Safety — Part 2-67: Particular requirements for dishwashers, First Particular requirements for floor treatment Edition machines, for commercial use, First Edition KS IEC 60335-2-11:2019 Kenya Standard — Household and similar KS IEC 60335-2-74:2009 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-11: electrical appliances — Safety — Part 2-74: Particular requirements for tumble dryers, First Particular requirements for portable immersion Edition heaters, First Edition

9th April, 2020 THE KENYA GAZETTE 1685

KS IEC 60335-2-85:2017 Kenya Standard — Household and similar KS ISO 9849:2017 Kenya Standard — Optics and optical electrical appliances — Safety — Part 2-85: instruments — Geodetic and surveying Particular requirements for fabric steamers, First instruments — Vocabulary, Second Edition Edition KS ISO 12858-1:2014 Kenya Standard — Optics and optical KS IEC 60335-2-91:2008 Kenya Standard — Household and similar instruments — Ancillary devices for geodetic electrical appliances — Safety — Part 2-91: instruments — Part 1: Invar levelling staffs, Particular requirements for walk-behind and Second Edition hand-held lawn trimmers and lawn edge KS ISO 12858-3:2005 Kenya Standard — Optics and optical trimmers, First Edition instruments — Ancillary devices for geodetic KS IEC 60335-2-94:2008 Kenya Standard — Household and similar instruments — Part 3: Tribrachs, First Edition electrical appliances — Safety — Part 2-94: KS ISO 17123-1:2014 Kenya Standard — Optics and optical Particular requirements for scissors type grass instruments — Field procedures for testing shears, First Edition geodetic and surveying instruments — Part 1: Theory, Second Edition KS IEC 60335-2-95:2019 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-95: KS ISO 17123-4:2012 Kenya Standard — Optics and optical Particular requirements for drives for vertically instruments — Field procedures for testing moving garage doors for residential use, First geodetic and surveying instruments — Part 4: Edition Electro-optical distance meters (EDM measurements to reflectors), Second Edition KS IEC 60335-2-98:2008 Kenya Standard — Household and similar electrical appliances — Safety — Part 2-98: KS ISO 17123-5:2018 Kenya Standard — Optics and optical Particular requirements for humidifiers, First instruments — Field procedures for testing Edition geodetic and surveying instruments — Part 5: Total stations, First Edition KS ISO 20785-4:2019 Kenya Standard — Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 4: KS ISO 17123-6:2012 Kenya Standard — Optics and optical instruments — Field procedures for testing Validation of codes, First Edition geodetic and surveying instruments — Part 6: KS ISO 16637:2016 Kenya Standard — Radiological protection — Rotating lasers, First Edition Monitoring and internal dosimetry for staff KS ISO 17123-7:2005 Kenya Standard — Optics and optical members exposed to medical radionuclides as instruments — Field procedures for testing unsealed sources, First Edition geodetic and surveying instruments — Part 7: KS ISO 16645:2016 Kenya Standard — Radiological protection — Optical plumbing instruments, First Edition Medical electron accelerators — Requirements KS ISO 17123-8:2015, Optics and optical instruments — Field and recommendations for shielding design and procedures for testing geodetic and surveying evaluation, First Edition instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK), First KS ISO 20553:2006 Kenya Standard — Radiation protection — Edition Monitoring of workers, occupationally exposed to a risk of internal contamination with KS ISO 17123-9:2018 Kenya Standard — Optics and optical radioactive material, First Edition instruments — Field procedures for testing geodetic and surveying instruments — Part 9: KS ISO 18310-1:2017 Kenya Standard — Measurement and Terrestrial laser scanners, First Edition prediction of the ambient dose equivalent from patients receiving iodine 131 administration KS ISO/CIE 11664-1:2019 Kenya Standard — Colorimetry — Part 1: after thyroid ablation — Part 1: During the CIE standard colorimetric observers, Second hospitalization, First Edition Edition KS 1954:2020 Kenya Standard — Medical research — KS ISO 11664-2:2007 Kenya Standard — CIE standard illuminants Administration of ionizing radiation to human for colorimetry, First Edition subjects — Requirements, Second Edition KS ISO/CIE 11664-3:2019 Kenya Standard — Colorimetry — Part 3: KS 2029:2020 Kenya Standard — Corpses containing CIE tristimulus values, First Edition radioactive materials — Safe handling — Code KS ISO/CIE 11664-4:2019 Kenya Standard — Colorimetry — Part 4: of practice, Second Edition CIE 1976 L*a*b* colour space, First Edition KS 2030:2020 Kenya Standard — Discharge of patients KS ISO/CIE 11664-5:2016 Kenya Standard — Colorimetry — Part 5: undergoing treatment with radioactive CIE 1976 L*u*v* colour space and u', v' substances — Code of practice, Second Edition uniform chromaticity scale diagram, First Edition KS ISO 7944:1998 Cor 1:2009 Kenya Standard — Optics and optical instruments — Reference wavelengths, F KS 2896-1:2020 Kenya Standard — Software and Systems Edition Engineering Processes — Requirements and Evaluation — Part 1: Agreement processes — KS ISO 9334:2012 Kenya Standard — Optics and optical instruments Acquisition and supply, First Edition — Optical transfer function — Definitions and mathematical relationships, Second Edition KS 2896-2-1:2020 Kenya Standard — Software and Systems Engineering Processes — Requirements and KS ISO 15529:2010 Kenya Standard — Optics and optical Evaluation — Part 2-1: Technical processes, instruments — Optical transfer function — First Edition Principles of measurement of modulation transfer function (MTF) of sampled imaging KS 2896-2-2:2020 Kenya Standard — Software and Systems systems, Second Edition Engineering Processes — Requirements and Evaluation — Part 2 - 2: Technical evaluation, KS ISO 13653:2019 Kenya Standard — Optics and optical First Edition instruments — General optical test methods — KS 2896-3-1:2020 Kenya Standard — Software Engineering Measurement of relative irradiance in the image processes — Software product quality — Part field, First Edition 3-1: Requirements, First Edition

168616861:40 PM THE KENYA GAZETTE 9th April, 2020

KS 2896-3-2:2020 Kenya Standard — Software Engineering KS ISO 12966-4:2015 Kenya Standard — Animal and vegetable fats processes — Software product quality — Part 3- and oils — Gas chromatography of fatty acid 2: Requirements, First Edition methyl esters — Part 4: Determination by capillary gas chromatography, First Edition KS ISO/IEC TR 25021:2012 Kenya Standard — Systems and software engineering -- Systems and software Quality KS ISO 7305:2019 Kenya Standard — Specification for milled Requirements and Evaluation (Square) — cereal products — Determination of fat acidity, Quality measure elements, First Edition Second Edition KS ISO/IEC 25022: 2016 Kenya Standard — Software engineering — KS ISO 5530-1:2013 Kenya Standard — Wheat flour — Physical Software Product Quality Requirements and characteristics of doughs — Part 1: Evaluation (Square) — Measurement of quality Determination of water absorption and in use, First Edition rheological properties using a farinograph, Second Edition KS ISO/IEC 25023:2016 Kenya Standard — Systems and Software Quality Requirements and Evaluation (Square) Agriculture — Measurement of system and software product quality, First Edition KS 2077:2020 Kenya Standard — Seed potato — Specification, Second Edition KS ISO/IEC 25024:2016 Kenya Standard — Systems and software engineering — Systems and software Quality KS 2422:2020 Kenya Standard — Potassium sulphate Requirements and Evaluation (Square) — fertilizer, technical grade — Specification, Measurement of data quality, First Edition Second Edition KS ISO/IEC/IEEE 29119-4:2015 Kenya Standard — Software and KS 2423:2020 Kenya Standard — Magnesium nitrate fertilizer, systems engineering — Software testing — Part technical grade — Specification, Second Edition 4: Test techniques, First Edition KS 2897:2020 Kenya Standard — Propolis — Code of KS ISO/IEC 38505-1:2017 Kenya Standard — Information practice, First Edition technology — Governance of IT — Governance of data — Part 1: Application of ISO/IEC 38500 KS 2898:2020 Kenya Standard — Pollen — Code of practice, to the governance of data, First Edition First Edition KS ISO/IEC TR 38505-2:2018 Kenya Standard — Information KS 2424:2020 Kenya Standard — Monoammonium Phosphate technology — Governance of IT — Governance (MAP) and Diammonium Phosphate (DAP) of data — Part 2: Implications of ISO/IEC fertilizer, technical grade — Specification, 38505-1 for data management, First Edition Second Edition KS ISO/IEC/IEEE 15288:2015 Kenya Standard — Systems and KS 2426:2020 Kenya Standard — Monopotassium phosphate Software engineering — Systems and software fertilizer, technical grade — Specification, engineering — System life cycle processes, Second Edition First Edition KS 2427:2020 Kenya Standard — Soluble compound fertilizer KS ISO/IEC/IEEE 12207:2017 Kenya Standard — Systems and — Specification, Second Edition software engineering — Software life cycle KS 157:2020 Kenya Standard — Monoammonium Phosphate processes, First Edition (MAP) and Diammonium Phosphate (DAP) Food fertilizers — Specification, Sixth Edition KS ISO 9936:2016 Kenya Standard — Animal and vegetable fats Engineering and oils — Determination of tocopherol and KS ISO 13061-1:2014 Kenya Standard — Physical and mechanical tocotrienol contents by high-performance liquid properties of wood — Test methods for small chromatography, Second Edition clear wood specimens — Part 1: determination KS ISO 662:2016 Kenya Standard — Animal and vegetable fats of moisture content for physical and mechanical and oils — Determination of moisture and tests, First Edition volatile matter content, Second Edition KS ISO 13061-2:2014 Kenya Standard — Physical and mechanical KS ISO 15774:2017 Kenya Standard — Animal and vegetable fats and properties of wood — test methods for small oils — Determination of cadmium content by clear wood specimens — Part 2: determination direct graphite furnace atomic absorption of density for physical and mechanical tests, spectrometry, Second Edition First Edition KS ISO 3961:2018 Kenya Standard — Animal and vegetable fats KS ISO 13061-3:2014 Kenya Standard — Physical and mechanical and oils — Determination of iodine value, properties of wood — test methods for small Second Edition clear wood specimens — Part 3: determination of ultimate strength in static bending, First KS ISO 6320:2017 Kenya Standard — Animal and vegetable fats Edition and oils — Determination of refractive index, Second Edition KS ISO 30500:2018 Kenya Standard — Non-sewered sanitation systems — Prefabricated integrated treatment KS ISO 6883:2017 Kenya Standard — Animal and vegetable fats units — General safety and performance and oils — Determination of conventional mass requirements for design and testing, First per volume (litre weight in air), Second Edition Edition KS ISO 6884:2008 Kenya Standard — Animal and vegetable fats KS ISO 630-1:2011 Kenya Standard — Structural steels — Part 1: and oils — Determination of ash, Second General technical delivery conditions for hot- Edition rolled products, First Edition KS ISO 6885:2016 Kenya Standard — Animal and vegetable fats KS ISO 630-2:2011 Kenya Standard — Structural steels — Part 2: and oils — Determination of anisidine value, Technical delivery conditions for structural Second Edition steels for general purposes, First Edition KS ISO 8534:2017 Kenya Standard — Animal and vegetable fats KS ISO 630-3: 2012 Kenya Standard — Structural steels — Part 3: and oils — Determination of water content — Technical delivery conditions for fine-grain Karl Fisscer method, Second Edition structural steels, First Edition

9th April, 2020 THE KENYA GAZETTE 1687

KS 2464-2:2020 Kenya Standard — Performance of household KS ISO 80601-2-74:2017 Kenya Standard — Medical electrical electrical appliances — Refrigerating appliances equipment — Part 2-74: Particular requirements — Part 2: Minimum energy performance for basic safety and essential performance of standard requirements, Second Edition respiratory humidifying equipment, Second Edition Leather and Textile KS 2901:2020 Kenya Standard — Sports balls — Netballs — KS ISO 80369-7:2016 Kenya Standard — Small-bore connectors for Specification, First Edition liquids and gases in healthcare applications — Part 7: Connectors for intravascular or KS 2883-1:2020 Kenya Standard — Leather — Code of practice hypodermic applications, Second Edition — Grading of fish skin on basis of defects and size — Part 1: Nile perch First Edition KS ISO 8362-1:2018 Kenya Standard — Injection containers and accessories — Part 1: Injection vials made of KS 2888:2020 Kenya Standard — Fleece jacket — glass tubing, Second Edition Specification. First Edition KS ISO 8362-2:2015 Kenya Standard — Injection containers and KS ISO 20471:2013 Kenya Standard — High visibility clothing — accessories — Part 2: Closures for injection Test methods and requirements. First Edition vials, Second Edition KS ISO 1419:2019 Kenya Standard — Rubber- or plastics-coated KS ISO 8362-5:2016 Kenya Standard — Injection containers and fabrics — Accelerated-ageing tests, First accessories — Part 5: Freeze drying closures for Edition injection vials, Second Edition KS ISO 1420:2016 Kenya Standard — Rubber-or plastics-coated KS ISO 10651-5:2006 Kenya Standard — Lung ventilators for fabrics — Determination of resistance to medical use — Particular requirements for basic penetration by water. First Edition safety and essential performance — Part 5: Gas- KS ISO 1421:2016 Kenya Standard — Rubber- or plastics-coated powered emergency resuscitators, Second fabrics — Determination of tensile strength and Edition elongation at break, First Edition KS ISO 7864:2016 Kenya Standard — Sterile hypodermic needles KS ISO 2411:2017 Kenya Standard Rubber- or plastics-coated for single use — Requirements and test fabrics — Determination of coating adhesion. methods, Second Edition First Edition KS ISO 5832-11:2014 Kenya Standard — Implants for surgery — KS ISO 3011:1997 Kenya Standard — Rubber- or plastics-coated Metallic materials — Part 11: Wrought titanium fabrics — Determination of resistance to ozone 6-aluminium 7-niobium alloy, Second Edition cracking under static conditions, First Edition KS ISO 5832-7:2016 Kenya Standard — Implants for surgery — KS ISO 5470-1:2016 Kenya Standard — Rubber- or plastics-coated Metallic materials — Part 7: Forgeable and fabrics — Determination of abrasion resistance cold-formed cobalt-chromium-nickel- — Part 1: Taber abrader. First Edition molybdenum-iron alloy, Second Edition KS ISO 5470-2:2003 Kenya Standard — Rubber- or plastics-coated KS ISO 11737-1:2018 Kenya Standard — Sterilization of health care fabrics — Determination of abrasion resistance products — Microbiological methods — Part 1: — Part 2: Martindale Abrader. First Edition Determination of a population of KS 2625:2016 Amd 1:2020 Kenya Standard — Footballs — microorganisms on products, Second Edition Specification AMENDMENT 1, First Edition KS ISO 11737-2:2019 Kenya Standard — Sterilization of health care KS 2662:2016 Amd 2:2020 Kenya Standard — Disposable adult products — Microbiological methods — Part 2: diapers — Specification AMENDMENT 2, First Tests of sterility performed in the definition, Edition validation and maintenance of a sterilization process, Second Edition Trade KS EAS 786:2013 Kenya Standard — Skin care creams, lotions KS ISO 10555-4:2013 Kenya Standard — Intravascular catheters — and gels — Specification, First Edition Sterile and single-use catheters — Part 4: Balloon dilatation catheters, Second Edition Services KS ISO 15223-2:2010 Kenya Standard — Medical devices — KS ISO 23500-2:2019 Kenya Standard — Preparation and quality Symbols to be used with medical device labels, management of fluids for haemodialysis and labelling, and information to be supplied — Part related therapies — Part 2: Water treatment 2: Symbol development, selection and equipment for haemodialysis applications and validation, Second Edition related therapies, First Edition KS ISO 6710:2017 Kenya Standard — Single-use containers for KS ISO 23500-3:2019 Kenya Standard — Preparation and quality human venous blood specimen collection, management of fluids for haemodialysis and Second Edition related therapies — Part 3: Water for haemodialysis and related therapies, First KS ISO 11193-1:2008 Kenya Standard — Single-use medical Edition examination gloves — Part 1: Specification for gloves made from rubber latex or rubber KS ISO 23500-4:2019 Kenya Standard — Preparation and quality solution, Second Edition management of fluids for haemodialysis and related therapies — Part 4: Concentrates for KS ISO 11193-1:2008 Amd 1:2012 Kenya Standard — Single-use hemodialysis and related therapies, First Edition medical examination gloves — Part 1: KS ISO 23500-5:2019 Kenya Standard — Preparation and quality Specification for gloves made from rubber latex management of fluids for haemodialysis and or rubber solution, AMENDMENT 1, First related therapies — Part 5: Quality of dialysis Edition fluid for haemodialysis and related therapies, KS ISO 10282:2014 Kenya Standard — Single-use sterile rubber First Edition surgical gloves — Specification, Second Edition KS ISO 8637-1:2017 Kenya Standard — Extracorporeal systems for KS ISO 14155:2011 Kenya Standard — Clinical investigation of blood purification — Part 1: Haemodialysers, haemodiafilters, haemofilters and medical devices for human subjects — Good haemoconcentrators, Second Edition clinical practice, Second Edition

168816881:40 PM THE KENYA GAZETTE 9th April, 2020

KS ISO 14155:2011 Cor 1:2011 Kenya Standard — Clinical KS 914:2013 Kenya Standard — Acetone for industrial use investigation of medical devices for human — Specification subjects — Good clinical practice, KS ISO 5280:1979 Kenya Standard — Xylene for industrial use — TECHNICAL CORRIGENDUM 1, First Specification Edition KS 1180:1994 Kenya Standard — Specification for ethyl KS ISO 22882:2016 Kenya Standard — Castors and wheels — methyl ketone (Butanone for industrial use) Requirements for castors for hospital beds, Second Edition KS 1291:2013 Kenya Standard — Specification for butyl acetate for industrial use KS IEC 60601-2-44:2016 Kenya Standard — Medical electrical equipment — Part 2-44: Particular requirements KS ISO 805:1976 Kenya Standard — Aluminium oxide primarily for the basic safety and essential performance of used for the production of aluminium — X-ray equipment for computed tomography, Determination of iron content — 1, 10- Phenanthroline photometric method Second Edition KPAS 2355:2011 Kenya Standard — Powdered diatomaceous earth KS ISO 16069:2017 Kenya Standard — Graphical symbols — Safety (diatomite) — Specification signs — Safety way guidance systems (SWGS), Second Edition KS ISO 6353-1:1982 Kenya Standard — Reagents for chemical analysis — Part 1: Methods of test KS ISO 9241-220:2019 Kenya Standard — Ergonomics of human- system interaction — Part 220: Processes for KS ISO 2227:1972 Kenya Standard — Fomadehyde solutions for enabling, executing and assessing human- industrial use — Determination of formadehyde centered design within organizations, Second content Edition KS 2492:2013 Kenya Standard — Spatula — Specification KS ISO 21127:2014 Kenya Standard — Information and KS 2450:2013 Kenya Standard — Tripod Stand — documentation — A reference ontology for the Specification interchange of cultural heritage information, Second Edition KS ISO 641:1975 Kenya Standard — Laboratory glassware — Interchangeable spherical ground joints EAC/COMESA KS ISO 4142:2002 Kenya Standard — Laboratory glassware — KS 1054-1:2019 Cor 1:2020 Kenya Standard — Energy drinks — Test tubes Specification TECHNICAL CORRIGENDUM KS 924:2012 Kenya Standard — Specification for motor 1, First Edition vehicle chevrons, decals and strips The following standards are confirmed; KS 1815-1:2005 Kenya Standard — Symbolic safety signs — Chemical Part 1: Standard signs and general requirements KS 1293:2013 Kenya Standard — Isobutyl acetate (methyl KS 240:1997 Kenya Standard — Specification for glazed earthenware tiles propyl acetate) for industrial use — Specification KS 84:1978 Kenya Standard — Glossary of terms relating to ceramic ware industry and trade KS 1180:2012 Kenya Standard — Ethyl methyl ketone (butanone for industrial use) — Specification Electrotechnical KS 2436:2013 Kenya Standard — Formldehyde Solution for KS IEC 60598-2-1:1997 Kenya Standard — Luminaires — Part 2: Industrial use — Specification Particular requirements - Section 1: Fixed general purpose luminaires KS 2041:2008 Kenya Standard — Ethanol for industrial use — Specification KS IEC 60598-2-10:2003 Kenya Standard — Luminaires — Part 2: Particular requirements. Section 10: Portable KS 2040:2008 Kenya Standard — Calcium chloride — child-appealing luminaires Specification KS IEC 60598-2-18:1993 Kenya Standard — Luminaires — Part 2: KS 2472:2013 Kenya Standard — Food grade hexane — Particular requirements - Section 18: Specification Luminaires for swimming pools and similar applications. KS 2470:2013 Kenya Standard — Hexane for industrial use — Specification KS IEC 60598-2-19:1997 Kenya Standard — Luminaires — Part 2: Particular requirements. Section 19: Air- KS 1922:2007 Kenya Standard — Liquid iron-based handling luminaires (safety requirements) coagulants — Test methods KS IEC 60598-2-23:2001 Kenya Standard — Luminaires — Part 2: KS ISO 2481:1973 Kenya Standard — Sodium chloride for Particular requirements — Section 23: Extra industrial use — Determination of halogens, low voltage lighting systems for filament lamps expressed as chlorine — Mercurimetric method KS IEC 60598-2-25:1994 Kenya Standard — Luminaires — Part 2: Particular requirements — Section 25: KS ISO 2480:1972 Kenya Standard — Sodium chloride for Luminaires for use in clinical areas of hospitals industrial use — Determination of sulphate and health care buildings content — Barium sulphate gravimetric method KS IEC 60598-2-9:1993 Kenya Standard — Luminaires — Part 2: KS ISO 2479:1972 Kenya Standard — Sodium chloride for Particular requirements — Section 9: Photo and industrial use — Determination of matter film luminaires (non-professional) insoluble in water or in acid and preparation of principal solutions for other determinations KS 2262:2010 Kenya Standard — Fluorescent lamps and other lamps containing mercury — Specifications and KS ISO 6353-2:1983 Kenya Standard — Reagents for chemical disposal requirements analysis — Part 2: Specifications — First series KS 2447-1:2013 Kenya Standard — Performance of electrical KS ISO 2211:1973 Kenya Standard — Liquid chemical products — lighting equipment- Ballasts for fluorescent Measurement of colour in hazen units lamps — Part 1: Energy labeling and minimum (platinum-cobalt scale) energy performance standards requirements.

9th April, 2020 THE KENYA GAZETTE 1689

KS 2447-2:2013 Kenya Standard — Performance of electrical Engineering lighting equipment- Ballasts for fluorescent lamps — Part 2: Method of measurement to KS 2476:2013 Kenya Standard — Edge straightness of wooden determine energy consumption and performance board products — Test method of ballast-lamp circuits KS 2477:2013 Kenya Standard — Flatness of wooden board KS 2448-1:2013 Kenya Standard — Double-capped fluorescent products — Test method lamps — Performance specifications — Part 1: Minimum Energy Performance Standards KS 2475:2013 Kenya Standard — Fiberboard — Measurement (MEPS) for dimensions of test specimens —Test methods KS 1111-39:2005 Kenya Standard — Safety of household and similar electrical appliances — Part 39: KS ISO 13059:2011 Kenya Standard — Round timber — Particular requirements for humidifiers intended Requirements for the measurement of for use with heating, ventilation, or air- dimensions and methods for the determination conditioning systems of volume KS 1111-42:2005 Kenya Standard — Safety of household and KS ISO 9086-1:1987 Kenya Standard — Wood — Methods of similar electrical appliances — Part 42: physical and mechanical testing — Vocabulary Particular requirements for pedestrian- — Part 1: General concepts and macrostructure controlled mains-operated lawn scarifiers and aerators KS ISO 8906:1988 Kenya Standard — Sawn timber — Test methods — Determination of resistance to local KS ISO 9039:2008 Kenya Standard — Optics and photonics — transverse compression Quality evaluation of optical systems — Determination of distortion KS ISO 4470:1981 Kenya Standard — Sawn timber — Determination of the average moisture content KS ISO 11421:1997 Kenya Standard — Optics and optical of a lot instruments – Accuracy of optical transfer function (OTF) measurement KS 2513:2014 Kenya Standard — Composite pole for telephone, power and lighting purposes — KS ISO 12858-2:1999 Kenya Standard — Optics and optical Specification instruments — Ancillary devices for geodetic instruments — Part 2: Tripods Trade KS ISO 17123-2:2001 Kenya Standard — Optics and optical KS ISO 1004-1:2013 Kenya Standard — Information processing — instruments — Field procedures for testing Magnetic ink character recognition — Part 1: geodetic and surveying instruments — Part 2: Print specifications for E13 B Levels KS ISO 1004-2:2013 Kenya Standard — Information processing — KS ISO 17123-3:2001 Kenya Standard — Optics and optical Magnetic ink character recognition Part 2: Print instruments — Field procedures for testing specifications for CMC7 geodetic and surveying instruments — Part 3: Theodolites KS ISO 9564-1:2011 Kenya Standard — Financial services — Personal Identification Number (PIN) Food management and security — Part 1: Basic KS ISO 935:1988 Kenya Standard — Animal and vegetable fats principles and requirements for PINs in card- and oils — Determination of titre based systems Agriculture KS ISO IEC 31010:2009 Kenya Standard — Risk management — Risk assessment techniques KS ISO 21569:2005 Amd1:2013 Kenya Standard — Foodstuffs- Methods of analysis for the detection of Leather and Textile genetically modified organisms and derived products — Qualitative nucleic acid based KS ISO 105 E02:2013 Kenya Standard — Tests for colour fastness — methods AMENDMENT 1 Part E02: Colour fastness to sea water KS CAC/GL 68:2008 Kenya Standard — Guideline for the conduct of KS ISO 105 J03:2009 Kenya Standard — Textiles — Tests for food safety assessment of foods derived from colourfastness — Part J03: Calculation of colour recombinant — DNA animals differences KS CAC/GL 45:2003 Kenya Standard — Guideline for the conduct of KS ISO 105 E04:2013 Kenya Standard — Textiles — Tests for colour food safety assessment of foods derived from fastness — Part E04: Colour fastness to recombinant — DNA plants perspiration KS CAC/GL 46:2003 Kenya Standard — Guideline for the conduct of KS ISO 105 A01:2010 Kenya Standard — Textiles — Tests for colour food safety assessment of foods produced using fastness — Part A01: General principles of recombinant — DNA microorganisms. testing KS ISO 21569-2:2012 Kenya Standard — Horizontal methods for KS ISO 105 B08:1995 Kenya Standard — Textiles — Tests for colour molecular biomarker analysis-Methods of fastness — Part B08: Quality control of blue analysis for the detection of genetically wool reference materials 1 to 7 modified organisms and derived products — Part 2: Construct-specific real-time PCR method KS ISO 105 E07:2010 Kenya Standard — Textiles — Tests for colour for detection of GMO fastness — Part E07: Colour fastness to spotting: Water KS ISO 16578:2013 Kenya Standard — Molecular biomarker analysis — General definitions and KS ISO 105 E06:2006 Kenya Standard — Textiles — Tests for colour requirements for microarray detection of fastness — Part E06: Colour fastness to specific nucleic acid sequences spotting: Alkali KS ISO 13495:2013 Kenya Standard — Foodstuffs — Principles of KS ISO 105 E03:2010 Kenya Standard — Textiles — Tests for colour selection and criteria of validation for varietal fastness — Part E03: Colour fastness to identification methods using specific nucleic chlorinated water (swimming pool –water) acid

169016901:40 PM THE KENYA GAZETTE 9th April, 2020

KS ISO 105 E05:2010 Kenya Standard — Textiles — Tests for colour KS IEC 60598-2-2:1997 Kenya Standard — Luminaires — Part 2: fastness — Part E05: Colour fastness to Particular requirements — Section 2: Recessed spotting: Acid luminaires, to be replaced by KS IEC 60598-2- 2:2011 KS ISO 105 E08:1994 Kenya Standard — Textiles — Tests for colour fastness — Part E08: Colour fastness to hot KS IEC 60598-2-3:2002 Kenya Standard — Luminaires — Part 2: water Particular requirements — Section 3: Luminaires for road and street lighting, to be KS ISO 105 E16:2006 Kenya Standard — Textiles — Tests for color replaced by KS IEC 60598-2-3:2011 fastness — Part E16: Colour fastness to water spotting on upholstery fabrics KS IEC 60598-2-22:1997 Kenya Standard — Luminaires — Part 2: Particular requirements — Section 22: The following standards are withdrawn forthwith; Luminaires for emergency lighting, to be replaced by KS IEC 60598-2-22: 2017 KS ISO 10545-14:1995 Kenya Standard — Ceramic tiles — Part 14: Determination of resistance to stains to be KS IEC 60598-2-4:1997 Kenya Standard — Luminaires — Part 2: replaced by KS ISO 10545-14:2015 Particular requirements — Section 4: Portable general purpose luminaires, to be replaced by KS ISO 10545-13:1995 Kenya Standard — Ceramic tiles — Part 13: KS IEC 60598-2-4:2017 Determination of chemical resistance to be replaced by KS ISO 10545-13:2016 KS IEC 60598-2-5:1998 Kenya Standard — Luminaires — Part 2: Particular requirements — Section 5: KS ISO 10545-8:1994 Kenya Standard — Ceramic tiles — Part 8: Floodlights, to be replaced by KS IEC 60598-2- Determination of linear thermal expansion to be 5:2015 replace by KS ISO 10545-8:2014 KS IEC 60598-2-8:2001 Kenya Standard — Luminaires — Part 2: KS ISO 10545-9:1994 Kenya Standard — Ceramic tiles — Part 9: Particular requirements — Section 8: Determination of resistance to thermal shock to Handlamps, to be replaced by KS IEC 60598-2- be replaced by KS ISO 10545-9:2013 8:2013 KS ISO 3819:1985 Kenya Standard — Laboratory glassware — KS IEC 60598-2-24:1997 Kenya Standard — Luminaires — Part 2: Part 1: Beakers to be replaced by KS ISO Particular requirements — Section 24: 3819:2015 Luminaires with limited surface temperatures, to be replaced by KS IEC 60598-2-24:2013 KS ISO 385-2:1984 Kenya Standard — Laboratory glassware — Burettes — Part 2: Burettes for which no KS IEC/PAS 62612:2009 Kenya Standard — Self-ballasted LED- waiting time is specified to be replaced by KS lamps for general lighting services — ISO 385:2005 Performance requirements, to be replaced by KS IEC 62612:2018 KS ISO 385-1:1984 Kenya Standard — Laboratory glassware- Burettes — Part 1: General requirements to be KS 239:1996 Kenya Standard — Specification for safety replaced by KS ISO 385:2005 requirements for domestic and similar electrical appliances, to be replaced by KS IEC 60335- KS ISO 385-3:1984 Kenya Standard — Laboratory glassware — 1:2016 Burettes — Part 3: Burettes for which a waiting KS 1111-9:1993 Kenya Standard — Specification for safety time of 30 s is specified to be replaced by KS requirements for household electrical appliances ISO 385:2005 — Part 9: Requirements for a.c. electric shavers, KS ISO 7086-1:2000 Kenya Standard — Glass hollowware in contact hair clippers and similar appliances, to be with food — Release of lead and cadmium — replaced by KS IEC 60335-2-8:2018 Part 1: Test method to be replaced by KS ISO KS 1111-5:1991 Kenya Standard — Specification for safety 7086-1:2019 requirements for household electrical appliances KS ISO 4796-1:2000 Kenya Standard — Laboratory glassware — — Part 5: Particular requirements for battery Bottles — Part 1: Screw-neck bottles to be powered shavers, hair clippers and similar replaced by KS ISO 4796-1:2016 appliances and their charging and battery assemblies, to be replaced by KS IEC 60335-2- KS 1310:1996 Kenya Standard — Specification for fuel oils to 8:2018 be replaced by KS 1310:2020 KS 1111-11:1995 Kenya Standard — Specification for household KS IEC 60598-2-6:1996 Kenya Standard — Luminaires — Part 2: and similar electrical appliances — Part 11 Particular requirements — Section 6: Particular requirements for electrical clocks, to Luminaires with built-in transformers for be replaced by KS IEC 60335-2-26:2008 filament lamps, Withdrawn without KS 1111-20:1997 Kenya Standard — Specification for household replacement as the products are deemed electrical appliances — Part 20: Particular obsolete as luminaires are no longer Requirements for electric kitchen machines, to manufactured with inbuilt transformers be replaced by KS IEC 60335-2-14: 2019 KS IEC 60598-2-7:1994 Kenya Standard — Luminaires — Part 2: KS 1111-22:1997 Kenya Standard — Specification for household Particular requirements — Section 7: Portable electrical appliances — Part 22: Particular luminaires for garden use, withdrawn without Requirements for electric fans and regulators, to replacement as the requirements are now be replaced by KS IEC 60335-2-80:2015 covered by the newly adopted KS IEC 60598-2- 4:2017 KS 1111-8:1993 Kenya Standard — Specification for safety requirements for household and similar KS IEC 60598-2-17:1990 Kenya Standard — Luminaires — Part 2- electrical appliances — Part 8: Particular 17: Particular requirements — Luminaires for requirements for frying pans, deep fat fryers and stage lighting, television and film studios similar appliances, to be replaced by KS IEC (outdoor and indoor), to be replaced by KS IEC 60335-2-13:2016 60598-2-17:2017 KS 1111-12:1993 Kenya Standard — Specification for household KS IEC 60598-2-20:2002 Kenya Standard — Luminaires — Part 2- and similar electrical appliances — Part 12: 20: Particular requirements — Lighting chains, Particular requirements for sewing machines, to to be replaced by KS IEC 60598-2-20:2014 be replaced by KS IEC 60335-2-28:2008

9th April, 2020 THE KENYA GAZETTE 1691

KS 1111-17:1998 Kenya Standard — Specification for household KS 1111-27:2005 Kenya Standard — Safety of household and and similar electrical appliances — Part 17: similar electrical appliances — Part 27: Particular requirements for commercial electric Particular requirements for appliances for griddles and griddle grills, to be replaced by KS heating liquids, to be replaced by KS IEC IEC 60335-2-38:2017 60335-2-15:2018 KS 1111-19:1998 Kenya Standard — Specification for household KS 1111-30:2005 Kenya Standard — Safety of household and and similar electrical appliances — Part 19: similar electrical appliances — Part 30: Particular Requirements for commercial electric Particular requirements for commercial electric forced convection ovens, to be replaced by KS boiling pans, to be replaced by KS IEC 60335- IEC 60335-2-42:2017 2-47:2017 KS 1111-32:2005 Kenya Standard — Safety of household and KS 1111-19:1998 Kenya Standard — Specification for household similar electrical appliances — Part 32: and similar electrical appliances — Part 19: Particular requirements for commercial electric Particular Requirements for commercial electric hot cupboards, to be replaced by KS IEC forced convection ovens, to be replaced by KS 60335-2-49:2017 IEC 60335-2-2:2019 KS 1111-33:2005 Kenya Standard — Safety of household and KS 1111-13:1993 Kenya Standard — Specification for household similar electrical appliances — Part 33: and similar electrical appliances — Part 13: Particular requirements for sauna heating Particular requirements for room heaters, to be appliances, to be replaced by KS IEC 60335-2- replaced by KS IEC 60335-2-30:2016 53:2017 KS 1111-3:1994 Kenya Standard — Specification for safety KS 1111-34:2005 Kenya Standard — Safety of household and requirements for household electrical appliances similar electrical appliances — Part 34: — Part 3: Particular requirements for Particular requirements for projectors and dishwashers, to be replaced by KS IEC 60335- similar appliances, to be replaced by KS IEC 2-5:2018 60335-2-56:2014 KS 1111-4:1993 Kenya Standard — Specification for safety KS 1111-35:2005 Kenya Standard — Safety of household and requirements for household electrical appliances similar electrical appliances — Part 35: — Part 4: Particular requirements for washing Particular requirements for insect killers, to be machines, to be replaced by KS IEC 60335-2- replaced by KS IEC 60335-2-59:2009 7:2019 KS 1111-36:2005 Kenya Standard — Safety of household and KS 1111-7:1997 Kenya Standard — Specification for safety similar electrical appliances — Part 36: requirements for domestic and similar electrical Particular requirements for floor-treatment and appliances — Part 7: Particular requirements for floor-cleaning machines, for industrial and commercial use, to be replaced by KS IEC tumbler dryers, to be replaced by KS IEC 60335-2-67:2016 60335-2-11:2019 KS 1111-37:2005 Kenya Standard — Safety of household and KS 1111-15:1993 Kenya Standard — Specification for household similar electrical appliances — Part 37: and similar electrical appliances — Part 15: Particular requirements for portable immersion Particular requirements for commercial electric heaters, to be replaced by KS IEC 60335-2- ranges, ovens and hob elements, to be replaced 74:2009 by KS IEC 60335-2-36:2017 KS 1111-38:2005 Kenya Standard — Safety of household and KS 1111-18:1991 Kenya Standard — Specification for household similar electrical appliances — Part 38: and similar electrical appliances — Part 18: Particular requirements for fabric steamers, to Particular requirements for commercial electric be replaced by KS IEC 60335-2-85:2017 multi-purpose cooking pans, to be replaced by KS IEC 60335-2-39:2017 KS 1111-41:2005 Kenya Standard — Safety of household and similar electrical appliances — Part 41: KS 1111-6:2000 Kenya Standard — Specification for safety Particular requirements for walk-behind and requirements for household and similar hand-held lawn trimmers and lawn edge electrical appliances — Part 6: Particular trimmers, to be replaced by KS IEC 60335-2- requirements for toasters, grills, roasters and 91:2008 similar appliances, to be replaced by KS IEC KS 1111-43:2005 Kenya Standard — Safety of household and 60335-2-9:2019 similar electrical appliances — Part 43: KS 1111-23:2002 Kenya Standard — Safety of household and Particular requirements for scissors type grass similar electrical appliances — Part 23: shears, to be replaced by KS IEC 60335-2- Particular requirements for instantaneous water 94:2008 heaters, to be replaced by KS IEC 60335-2- KS 1111-44:2005 Kenya Standard — Safety of household and 35:2016 similar electrical appliances — Part 44: Particular requirements for drives for vertically KS 1111-24:2005 Kenya Standard — Safety of household and moving garage doors for residential use, to be similar electrical appliances — Part 24: replaced by KS IEC 60335-2-95:2019 Particular requirements for spin extractors, to be replaced by KS IEC 60335-2-4:2017 KS 1111-39:2005 Kenya Standard — Safety of household and similar electrical appliances — Part 39: KS 1111-25:2005 Kenya Standard — Safety of household and Particular requirements for humidifiers intended similar electrical appliances — Part 25: for use with heating, ventilation, or air- Particular requirements for refrigerating conditioning systems, to be replaced by KS IEC appliances, ice-cream appliances and ice- 60335-2-88:2002 makers, to be replaced by KS IEC 60335-2- 24:2017 KS 1111-42:2005 Kenya Standard — Safety of household and similar electrical appliances — Part 42: KS 1111-28:2005 Kenya Standard — Safety of household and Particular requirements for pedestrian- similar electrical appliances — Part 26: controlled mains-operated lawn scarifiers and Particular requirements for ranges hoods, to be aerators, to be replaced by KS IEC 60335-2- replaced by KS IEC 60335-2-31: 2018 92:2002

169216921:40 PM THE KENYA GAZETTE 9th April, 2020

KS ISO 7944:1998 Kenya Standard — Optics and optical KS ISO 6885:1998 Kenya Standard — Animal and vegetable fats instruments — Reference wavelengths, to be and oils — Determination of anisidine value, to replaced by KS ISO 7944:1998/COR 1:2009 be replaced by KS ISO 6885:2016 KS ISO 9334:2007 Kenya Standard — Optics and optical KS ISO 8534:1996 Kenya Standard — Animal and vegetable fats instruments — Optical transfer function — and oils — Determination of water content — Definitions and mathematical relationships, to Karl Fisscer method, to be replaced by KS ISO be replaced by KS ISO 9334:2012 8534:2017 KS ISO 15529:2007 Kenya Standard — Optics and optical KS ISO 5530-1:1997 Kenya Standard — Wheat flour - Physical instruments — Optical transfer function — characteristics of doughs Part 1: Determination Principles of measurement of modulation of water absorption and rheological properties transfer function (MTF) of sampled imaging using a farinograph, to be replaced by KS ISO systems, to be replaced by KS ISO 15529:2010 5530-1:2013 KS ISO 10526:2007 Kenya Standard — standard illuminants for colorimetry, to be replaced by KS ISO/CIE KS ISO 7305:1998 Kenya Standard — Milled cereal products — 11664-2:2007 Determination of fat acidity, to be replaced by KS ISO 7305:2019 KS ISO 9849:2000 Kenya Standard — Optics and optical instruments — Geodetic and surveying KS EAS 351:2004 Kenya Standard — Toffee — Specification, to instruments — Vocabulary, to be replaced by be replaced by KS EAS 351:2019 KS ISO 9849:2017 KS EAS 352:2014 Kenya Standard — Chewing gum and bubble KS ISO 12858-1:1999 Kenya Standard — Optics and optical gum — Specification, to be replaced by KS instruments — Ancillary devices for geodetic EAS 352:2019 instruments — Part 1: Invar levelling staffs, to be replaced by KS ISO 12858-1:2014 KS 2422:2012 Kenya Standard — Potassium sulphate fertilizer, technical grade, to be replaced by KS KS ISO 17123-1:2001 Kenya Standard — Optics and optical 2422:2020 instruments — Field procedures for testing geodetic and surveying instruments — Part 1: KS 2423:2012 Kenya Standard — Magnesium nitrate fertilizer, Theory, to be replaced by KS ISO 17123- technical grade, Specification, to be replaced by 1:2014 KS 2423:2020 KS ISO 17123-4:2001 Kenya Standard — Optics and optical KS 2077:2007 Kenya Standard — Seed potato — instruments — Field procedures for testing Specification, to be replaced by KS 2077:2020 geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM KS 157:2018 Kenya Standard — Monoammonium and measurements to reflectors), to be replaced by diammonium phosphate fertilizer — KS ISO 17123-4:2012 Specification, to be replaced by KS 157:2020 KS ISO 17123-6:2003 Kenya Standard — Optics and optical KS 2424:2012 Kenya Standard — Monoammonium and instruments — Field procedures for testing diammonium phosphate fertilizer, technical geodetic and surveying instruments — Part 6: grade — Specification, to be replaced by KS Rotating lasers, to be replaced by KS ISO 2424:2020 17123-6:2012 KS 2426:2012 Kenya Standard — Monopotassium phosphate KS ISO/IEC 12207:2008 Kenya Standard — Systems and software fertilizer, technical grade — Specification, to be engineering — Software life cycle processes, to replaced by KS 2426:2020 be replaced by KS ISO/IEC/IEEE 12207:2017 KS 2427:2012 Kenya Standard — Soluble compound fertilizer KS ISO 9936:2006 Kenya Standard — Animal and vegetable fats — Specification, to be replaced by KS and oils — Determination of tocopherol and 2427:2020. tocotrienol contents by high-performance liquid chromatography, to be replaced by KS ISO KS ISO 3133:1975 Kenya Standard — Wood — Determination of 9936:2016 ultimate strength in static bending, to be replaced by KS ISO 13061-3:2014 KS ISO 662:1998 Kenya Standard — Animal and Vegetable fats and oils — Determination of moisture and KS ISO 3131:1975 Kenya Standard — Wood — Determination of volatile matter content, to be replaced by KS density for physical and mechanical tests, to be ISO 662:2016 replaced by KS ISO 13061-2:2014 KS ISO 15774:2000 Kenya Standard — Animal and vegetable fats and KS ISO 4859:1982 Kenya Standard — Wood — Determination of oils — Determination of cadmium content by radial and tangential swelling, to be replaced by direct graphite furnace atomic absorption KS ISO 13061-15:2017 spectrometry, to be replaced by KS ISO 15774:2017 KS 4469:1981 Kenya Standard — Wood — Determination of radial and tangential shrinkage, to be replaced KS ISO 3961:1996 Kenya Standard — Animal and vegetable fats by KS ISO 13061-13:2016 and oils — Determination of iodine value, To be replaced by KS ISO 3961:2018 KS ISO 8966:1987 Kenya Standard — Logging industry — Products — Terms and definitions, to be KS ISO 6320:1995 Kenya Standard — Animal and vegetable fats replaced by KS ISO 24294:2013 and oils — Determination of refractive index, to be replaced by KS ISO 6320:2017 KS 2464-2:2013 Kenya Standard — Performance of household KS ISO 6883:2007 Kenya Standard — Animal and vegetable fats electrical appliances — Refrigerating appliances and oils — Determination of conventional mass — Part 2: Minimum energy performance per volume (litre weight in air), to be replaced standard requirements, to be replaced by KS by KS ISO 6883:2017 2464-2:2020 KS ISO 6884:1985 Kenya Standard — Animal and vegetable fats KS 1557:2005 Kenya Standard — Pre-painted metal coated and oils — Determination of ash, to be replaced steel sheets and coils — Specification, to be by KS ISO 6884:2008 replaced by KS EAS 468:2019

9th April, 2020 THE KENYA GAZETTE 1693

KS 580:2014 Kenya Standard — Cosmetic creams, lotions KS ISO 8362-5:2008 Kenya Standard — Injection containers for and gels for skin care — Specification, to be injectable and accessories — Part 5: Freeze replaced by KS EAS 786:2013 drying closures for injection vials, to be replaced by KS ISO 8362-5:2016 KS 1532-1:1999 Kenya Standard — Code of practice for inspection and acceptance criteria for used KS ISO 11737-1:1995 Kenya Standard — Sterilization of medical textile products (Mitumba) — Part 1: Garments, devices — Microbiological methods — Part 1: to be replaced by KS EAS 356:2019 Estimation of population of microorganisms on products, to be replaced by KS ISO 11737- KS 1739-2:2013 Kenya Standard — Mosquito nets — Part 2: 1:2018 Long lasting insecticidal nets, to be replaced by KS EAS 455:2019 KS ISO 10555-2:1996 Kenya Standard — Sterile, single-use intravascular catheters — Part 2: Angiographic Services catheters, to be replaced by KS ISO 10555- KS ISO 8185:2007 Kenya Standard — Respiratory tract humidifiers 1:2013 for medical use — Particular requirements for KS ISO 10555-4:1996 Kenya Standard — Sterile, single-use respiratory humidification systems, to be intravascular catheters — Part 4: Ballon dilation replaced by KS ISO 80601-2-74:2017 catheters, to be replaced by KS ISO 10555-4: KS ISO 8637:2010 Kenya Standard — Cardiovascular implants and 2013 extracorporeal systems — Haemodialysers, KS ISO 594-1:1986 Kenya Standard — Conical fitting with a 6 haemodiafilters, haemofilters and percent (luer) taper for syringes, needles and haemoconcentrators, to be replaced by KS ISO other medical equipments — Part 1: General 8637-1:2017 requirements, to be replaced by KS ISO 80369- KS ISO 8637:2010/Amd 1:2013 Kenya Standard — Cardiovascular 7:2016 implants and extracorporeal systems — Haemodialysers, haemodiafilters, haemofilters KS ISO 594-2:1998 Kenya Standard — Conical fitting with a 6 and haemoconcentrators AMENDMENT 1, to percent (Luer) taper for syringes, needles and be replaced by KS ISO 8637-1:2017 which has other medical equipments — Part 2: Lock now incorporated it fitting, to be replaced by KS ISO 80369-7:2016 KS ISO/TR 18529:2000 Kenya Standard — Ergonomics of the KS ISO 595-1:1986 Kenya Standard — Reusable all-glass or metal- human-system interaction — Human-centred and-glass syringes for medical use — Part 1: lifecycle processes descriptions, to be replaced Dimensions, withdrawn and not replaced as the by KS ISO 9241-220:2019 content are taken care of in the product standards KS ISO 3864-1:2002 Kenya Standard — Graphical symbols — Safety colours and signs — Design principles for KS ISO 595-2:1987 Kenya Standard — Reusable all-glass or metal- safety signs in work places and public areas, to and-glass syringes for medical use — Part 2: be replaced by KS ISO 3864-1:2011 and KS Design, performance requirements and tests, ISO 3864-4:2011. technologically superseded withdrawn and not replaced KS ISO 16069:2004 Kenya Standard — Graphical symbols — Safety signs — Safety way guidance systems (SWGS), KS ISO 11737-2:2009 Kenya Standard — Sterilization of medical to be replaced by KS ISO 16069:2017 devices — Microbiological methods — Part 2: Test of sterility performed in the validation of a KS ISO 21127:2006 Kenya Standard — Information and sterilization process, to be replaced by KS ISO documentation — A reference ontology for the 11737-2: 2019 interchange of cultural heritage information, to be replaced by KS ISO 21127:2014 KS ISO 1135-1:1987 Kenya Standard — Transfusion equipment for medical use — Part 1: Glass transfusion bottles, KS ISO 8382:1988 Kenya Standard — Resuscitators intended for closures and caps, withdrawn without use with humans, to be replaced by KS ISO replacement 10651-5:2006 KS IEC 60601-1-1:2000 Kenya Standard — Medical electrical KS ISO 15223:2000 Kenya Standard — Medical devices — Symbols equipment — Part 1-1: General requirements for to be used with medical device labels, labelling safety — Collateral standard: Safety and information to be supplied, to be replaced requirements for medical electrical systems, to by KS ISO 15223-2:2010 be replaced by KS IEC 60601-1-1:2007 KS ISO 8362-2:2008 Kenya Standard — Injection containers for KS ISO 6710:2000 Kenya Standard — Single-use containers for injectables and accessories — Part 2: Closures venous blood specimen collection, to be for injection vials, withdrawn, to be replaced by replaced by KS ISO 6710:2017 ISO 8362-2:2015 KS IEC 60601-2-45:2001 Kenya Standard — Medical electrical KS ISO 8362-1:2009 Kenya Standard — Injection containers for equipment — Part 2-45: Particular requirements injectables and accessories — Part 1: Injection for the safety of mammographic X-ray vials made of glass tubing, to be replaced by KS equipment and mammographic stereotactic ISO 8362-1:2018 devices, withdrawn without replacement KS ISO 7864:1993 Kenya Standard — Sterile hypodermic needles KS ISO 11193-1:2002 Kenya Standard — Single-use medical for single-use, to be replaced by KS ISO examination gloves — Part 1: Specification for 7864:2016 gloves made from rubber latex or rubber KS ISO 5832-11:1994 Kenya Standard — Implants for surgery — solution, to be replaced by KS ISO 11193- Metallic materials Part 11: Wrought titanium 6- 1:2008 aluminium 7-nobium alloy, to be replaced by KS ISO 10282:2002 Kenya Standard — Single-use sterile rubber KS ISO 5832-11:2014 surgical gloves — Specification, to be replaced KS ISO 5832-7:1994 Kenya Standard — Implants for surgery - by KS ISO 10282:2014 Metallic materials Part 7: Forgeable and cold- KS ISO 14155-1:2003 Kenya Standard — Clinical investigation of formed cobalt-chromium-nickel-molybdenum- medical devices for human subjects — Part 1: iron alloy, to be replaced by KS ISO 5832- General requirements, to be replaced by KS ISO 7:2016 14155-1:2011

169416941:40 PM THE KENYA GAZETTE 9th April, 2020

KS ISO 22882:2004 Kenya Standard — Castors and wheels equipment for computed tomography, to be Requirements for castors for hospital beds, to be replaced by KS IEC 60601-2-44:2016 replaced by KS ISO 22882:2016 Dated the 9th April, 2020. KS IEC 60601-2-44:2002 Medical electrical equipment — Part 2-44: BERNARD NJIRAINI, Particular requirements for the safety of X-ray Secretary, National Standards Council.

PRINTED AND PUBLISHED BY THE GOVERNMENT PRINTER, NAIROBI