WTC 2013 Technical Sessions

TECHNICAL SESSIONS

Monday, September 9TH Connor Myant, Philippa Cann, Imperial College London, London, United Kingdom 1290: Biotribology Simulation System ET - Ecotribology S.N. Xu, Wuhan University of Science & Technology, Wuhan, China, H.Y. Guo, Xi’an Jiaotong University, MO1-ET1 Tribology for Energy Xi’an, China, L.L. Guo, United Manufacturing Group, Conservation I Yinchuan, China, X. Zhang, H. Xu, F.C. Wang, Xi’an Room 1 16:30 – 18:30 Jiaotong University, Xi’an, China 1318 – Keynote: Green Tribology at Sea 938: Effect of Phospholipids on Wear and Fric- Robert J.K. Wood, University of Southampton, tion of Ultra-High Molecular Weight Polyeth- Southampton, United Kingdom ylene 1079: Engine Tribology: From F1 Perform- Ryohei Oide, Takashi Morioka, Yoshinori Sawae, ance on Track to Energy Efficiency on Road Kyushu University, Fukuoka, Japan Louis Mourier, Paul Crofts, Mercedes AMG High Performance Powertrains, Brixworth, United 207: The Effect of Temperature on Tribologi- Kingdom, Mario Motta, Giuseppe Forastiero, Pietro cal Properties of Chemically Modified Salino, Petronas Lubricants International, Biobased Lubricant Villastellone (TO), Italy Nurin W.M. Zulkifli, M.A. Kalam, H.H. Masjuki, 105: New Method to Achieve Superlubricity University of Malaya, Kuala Lumpur, Malaysia, R. with Glycerol and Acid Solutions Yunus, University Putra Malaysia, Serdang, Malaysia Jinjin Li, Chenhui Zhang, Jianbin Luo, Tsinghua University, Beijing, China ST – Surface Tribology 126: Superlubricity: from Phosphoric Acid to Mixture of Acids and Polyhydroxy Alcohols MO1-ST1 Coatings 1 Solutions Room 3 16:30 – 18:30 Chenhui Zhang, Jinjin Li, Jianbin Luo, Tsinghua 634: Study on Metal Doping Effect on Tribo- University, Beijing, China logical Properties of DLC 1311: The Tribology of Elastomeric-Lip Seals – Hirochika Fukuda, Kenta Oshima, Auezhan Amanov, Reducing Emissions, Preventing Leakage, Ryo Tsuboi, Shinya Sasaki, Tokyo University of Saving the Ecology Science, Tokyo, Japan Frank Bauer, Universität Stuttgart, Stuttgart, 1004: MoS2-DLC Nanocomposite Solid Lubri- Germany cant Coated by a PECVD-PVD Hybrid Deposi- 522: Tribological and Economic Assessment of tion Method Hydraulic Oils Refortified Takanori Takeno, Satoshi Yoshida, Kazuyoshi Jianfang Liu, Kali Gu, Yuan Zhao, Jian Li, Wuhan Nishigaki, Hiroyuki Miki, Toshiyuki Takagi, Koshi Research Institute of Materials Protection, Wuhan, Adachi, Tohoku University, Sendai, Japan China 1005: Sliding Contact Analysis between a BT - Biotribology Spherical Particle and DLC Coated Steel Sur- face MO1-BT1 Lubricants and Lubrication in Tae‐Jo Park, Jun‐Hyuk Lee, Gyeongsang National Biotribology University, Jinju, Republic of Korea 1041: A Low Friction Dual-Layer Carbon Film Room 2 16:30 – 18:30 on 6H-SiC Wafer Using Carbide-Derived Car- 188: Injectable Lubricants for Orthopaedic bon Process with Subsequent Chemical Vapor Implants Deposition Kirsi Pakkanen, Seunghwan Lee, Technical Jian Sui, Fuyan Liu, Junyan Zhang, Jinjun Lu, Chinese University of Denmark, Kgs. Lyngby, Denmark Academy of Sciences, Lanzhou, China 1228: Role of Salivary Film Structure in Biolu- 1116: Raman Study of DLC Films Prepared by brication Bipolar PBII&D Deepak H. Veeregowda, University of Groningen, Junho Choi, Takayuki Hibi, Takahisa Kato, University Groningen, Netherlands, Thomas Chudoba, Advanced of Tokyo, Tokyo, Japan, Masahiro Kawaguchi, Tokyo Surface Mechanics GmbH, Radeberg, Germany, Henk Metropolitan Industrial Technology Research J. Busscher, Prashant K. Sharma, Henny C. van der Institute, Tokyo, Japan Mei, University of Groningen, Groningen, Netherlands 1253: The Effect of Coating Characteristics on 691: Lubrication of Artificial Articular Joints the Performance of a-C:H and ta-C Coatings

1 Technical Sessions WTC 2013

Helena Ronkainen, Anssi Laukkanen, Kenneth Cost on the Basis of Agricultural Harvesting Holmberg, VTT Technical Research Centre of Machines Finland, Espoo, Finland, Makoto Kano, T. Horiuchi, Michael Lugbauer, Alois Kröll, Busatis GmbH, Kanagawa Industrial Technology Center, Ebina, Purgstall, Austria Japan, T. Suzuki, Keyo University, Tokyo, Japan 495: High-speed Sliding Wear Behaviour of PEEK Coating MO1-ST2 Contact Mechanics 1 Hifumi Tabata, Masaaki Yamane, Mitsuo Sano, IHI Room 4 16:30 – 18:30 Corporation, Yokohama, Japan 24: Adhesive Contact between a True Rigid 891: Microstructural and Tribological Charac- Sphere and an Elastic Half-Space terization of Gas Oxinitrided and Ion Nitrided Jiunn‐Jong Wu, Chang Gung University, Tao­Yuan, 42CrMo4 Steel Taiwan Massimo Lorusso, Daniele Ugues, Politecnico di 180: Development of an Innovative Adhesion Torino, Torino, Italy, Luigi Cislaghi, TTN SpA, Model for Railway Applications Nerviano (MI), Italy Benedetto Allotta, Enrico Meli, Luca Pugi, 500: Tribological Properties of Ag- and Au- Alessandro Ridolfi, Andrea Rindi, University of doped MoCN Coatings in the Temperature Florence, Florence, Italy Range of 25-700°C 566: Micro Contact Analysis in Hydrodynamic Dmitry V. Shtansky, Andrey V. Bondarev, Philipp V. Joints Kiryukhantsev‐Korneev, National University of Kamel G. Mahmoud, Oliver Knaus, AVL List GmbH, Science and Technology “MISIS”, Moscow, Russian Graz, Austria Federation, Cristina T. Rojas, Vanda Godinho, 829: Adhesive Contact of Transversally- Asuncion Fernandez, Instituto de Ciencia de isotropic and Prestressed Elastic Solids Materiales de Sevilla CSIC­US, Sevilla, Spain Feodor M. Borodich, Cardiff University, Cardiff, United Kingdom, Boris A. Galanov, Institute for LA – Lubricants and Additives Problems in Materials Science of NAS of Ukraine, Kiev, Ukraine, Leon M. Keer, Northwestern MO1-LA1 Lubricants Chemistry and University, Evanston, IL, United States, Maria Suarez‐ Rheology Alvarez, Cardiff University, Cardiff, United Kingdom Room 6 16:30 – 18:30 1033: Three-Dimensional Analysis of Multi- 36: Use of Chemically Activated Polymer as layered Rough Surface Contact Additive in Lubricants for Wire Ropes Jessika T. Nyqvist, Amir Kadiric, Richard.S Sayles, Thorsten Hoffmann, Dieter Lehmann, Leibniz­ Efstathios Ioannides, Imperial College London, Institut für Polymerforschung Dresden, Dresden, London, United Kingdom Germany, Martin Anders, Thorsten Schmidt, 1081: Aspects of Modeling Adhesion with Sur- Technische Universität Dresden, Dresden, Germany face Topography 83: Energy Efficient Industrial Lubricants Simon Medina, Daniele Dini, Imperial College David Blain, Angela Galiano‐Roth, ExxonMobil London, London, United Kingdom Research and Engineering, Paulsboro, NJ, United States, Kevin Harrington, Richard Russo, FW – Dry Friction and Wear ExxonMobil Fuels and Lubricants, Fairfax, VA, United States MO1-FW1 Anti-wear Technology & Case Studies 795: Correlation between Molecular Interac- tion and Traction Property of Polyglycols Room 5 16:30 – 18:30 Koji Takiwatari, Ichinoseki National College of 151: Replacement of Hard Cr on AISI 316l Technology, ichinoseki, Japan, Shinya Sato, Yasushi Steel in Sliding Contacts for the Pharmaceuti- Hoshi, Hidetaka Nanao, Shigeyuki Mori, Iwate cal Industry: Failure Analysis and Dry Sliding University, Morioka, Japan Tests 851: Formation Process of Adsorbed Layer by Lorella Ceschini, Alessandro Marconi, Carla Martini, Additives and Its Viscoelastic Property University of Bologna, Bologna, Italy Kentaro Tanaka, Katsumi Iwamoto, Tokyo University 381: Friction and Wear Behavior of Wear- of Marine Science and Technology, Tokyo, Japan resistant Belt in Drill Joint for Deep and Ul- 865: A Rheological Study of Viscosity Index tra-deep Wells Improvers (VII) in Base Oils Under Severe Kai Zhang, Deguo Wang, Zhenquan Wang, Suhai Liu, Conditions Siwei Zhang, China University of Petroleum, Charlotte Mary, David Philippon, INSA­Lyon, Changping, China Villeurbanne, France, Delphine Laurent, Total 894: Iron-Based Sintered Coatings – Potential Marketing, & Services CReS, Solaize, France, Scott of Minimizing Downtime and Maintenance Bair, Georgia Institute of Technology, Atlanta, GA,

2 WTC 2013 Technical Sessions

United States, Philippe Vergne, INSA­Lyon, VI – VIENNANO’13-Nanotechnology Villeurbanne, France 744: In-situ Surface Chemistry of Lubricant MO1-VI1 Nanostructure and Friction Films Using X-ray Absorption Near Edge Contact - Part A Spectroscopy Room 8 16:30 – 18:30 Ardian Morina, Hongyuan Zhao, University of Leeds, 855: Effect of Molecular Modification on the Leeds, United Kingdom, Fred Mosselmans, Diamond Frictional Property of Nano-patterned Sur- Light Source Ltd., Oxford, United Kingdom face LF – STLE/ASME – Lubrication Koji Miyake, Miki Nakano, Atsushi Korenaga, National Institute of Advanced Industrial Science and Fundamentals Technology, Tsukuba, Japan, Takamasa Ueki, Koji Ikeda, Yasuhisa Ando, Tokyo University of MO1-LF1 EHL Modelling I Agriculture and Technology, Koganei, Japan Room 7 16:30 – 18:30 115: Optimization of Friction and Adhesion 809: Multi-scale Modeling of Lubricated Con- Behavior of Ultrathin Films for Nanotech- tacts: a Study on the Velocity Boundary Con- nological Applications dition at the Wall-fluid Interface Lukasz Ocypa, Marcin Michalowski, Jaroslaw Linke, Daniele Savio, Nicolas Fillot, Philippe Vergne, Dominik Nolbert, Zygmunt Rymuza, Warsaw Université de Lyon, Villeurbanne, France, Hartmut University of Technology, Warsaw, Poland, Wolfgang Hetzler, Wolfgang Seemann, Karlsruhe Institute of Vollnhofer, Christoph Eisenmenger‐Sittner, Technology, Karlsruhe, Germany, Rihard Pasaribu, Technische Universität Wien, Wien, Austria Guillermo Morales‐Espejel, SKF Engineering and 116: Tribological Properties of Ultrathin DLC- Research Centre, Nieuwegein, Netherlands Coated Nanotextured Surface on a PET Film 2: Quantification of Friction Regimes in Elas- Hiroshi Tani, Hideyuki Takahashi, Shinji tohydrodynamic Lubrication Koganezawa, Norio Tagawa, Kansai University, Wassim Habchi, Lebanese American University, Dep. Suita, Japan of Ind. & Mech. Eng., Byblos, Lebanon, Scott Bair, 979: Frictional Behavior of Nanostructured Georgia Institute of Technology, Atlanta, GA, United Carbon Films Fabricated by Electron-Ion Hy- States, Philippe Vergne, Université de Lyon, Lyon, brid Irradiation France Chao Wang, Shenzhen University, Shenzhen, China, 1204: Particle-Laden Flows in Elastohydrody- Xue Fan, Xi’an Jiaotong University, Xi’an, China, Gang namic Lubrication Xu, Dongfeng Diao, Shenzhen University, Shenzhen, Christina Twist, Qian Wang, Chengjiao Yu, China Northwestern University, Evanston, IL, United States 672: Influence of Liquid on the Nanostructura- 237: On the Numerical Accuracy of Rough tion of Powdered Lamellar Tribofilms Surface EHL Solution Georges Minatchy, Laurence Romana, Université des Dong Zhu, Sichuan University, Chengdu, China, Antilles et de la Guyane, Pointe à Pitre, Guadeloupe, Yuchuan Liu, Qian Wang, Northwestern University, France, Nadiège Nomede‐Martyr, Faculté Evanston, IL, United States Universitaire de Notre Dame de la Paix, Namur, 312: Transient Thermal Elastohydrodynamic Belgium, Philippe Bilas, Philippe Thomas, Jean‐louis Simulation of Involute Helical Gears under Mansot, Université des Antilles et de la Guyane, Mixed Friction Conditions Pointe à Pitre, Guadeloupe, France Lars Bobach, Ronny Beilicke, Dirk Bartel, Ludger 558: Coarsened Third Body Grains Alleviate Deters, Otto­von­Guericke Universität, Magdeburg, Sliding Between Pure Nanocrystalline Sur- Germany faces 613: Elastohydrodynamic Simulation of Grease Pedro A. Romero, Tommi T. Järvi, Nils Beckmann, Lubrication Michael Moseler, Fraunhofer Institute for Mechanics Takashi Noda, NSK Ltd., Fujisawa, Japan, Yuchuan of Materials IWM, Freiburg, Germany Liu, GM, Pontiac, MI, United States, Hirotoshi Aramaki, NSK Ltd., Fujisawa, Japan, Q. Jane Wang, BE – Bearings Northwestern University, Evanston, IL, United States MO1-BE1 Fluid-Film Bearings 1 Room 9 16:30 – 18:30 781: Effects of 3D Surface Roughness and Lu- bricant Shear Thinning and Viscoelastic Prop- erties on Transient-Thermohydrodynamic Behavior of a Big-End Bearing

3 Technical Sessions WTC 2013

Tirumalesh Nagaraju, K.M. Jagadeesha, PES college 1274: Basic Tests on Circular Eccentric Cam- of Engineering, Mandya, India follower Pairs 864: Couple Stress and Poro-elasticity Effects Enrico Ciulli, University of Pisa, Pisa, Italy, Francesco on Squeeze Film Behaviour Fazzolari, AMTesting s.r.l., S. Piero a Grado (PI), Italy, Mohamed Nabhani, Mohamed El Khlifi, University Bruno Piccigallo, Accademia Navale, Livorno, Italy Hassan II Mohammedia, Mohammedia, Morocco, 1281: Investigation on the Tribological Behav- Benyebka Bou‐Saïd, INSA­Lyon, Villeurbanne, France ior of Thermal Sprayed Coatings Applied to 450: Evaluation of Numerical Methods for the Cylinder Liners – Influence of Chromium Con- Analysis of Hydrodynamic Bearings tent on Wear Resistance of Plasma Trans- Tomasz Woloszynski, Pawel Podsiadlo, Gwidon W. ferred Wire Arc Coatings Stachowiak, Curtin University, Perth, Australia Alexander Dudás, Mirko Demmler, Kay Schintzel, Széchenyi István University, Győr, Hungary 1101: Sector-pad Thrust Bearings with Rec- tangular Dimples: Comparison between Ex- 1045: Degradation Mechanism of Water Con- periments and CFD Thermohydrodynamic taminated Automatic Transmission Fluid Simulations (ATF) in Wet Clutch System Christos I. Papadopoulos, National Technical Nowshir Fatima, Allan Holmgren, Pär Marklund, Aji University of Athens, Zografos, Greece, Yann Henry, P. Mathew, Roland Larsson, Luleå University of Jean Bouyer, Université de Poitiers, Futuroscope Technology, Luleå, Sweden Chasseneuil, France, Lambros Kaiktsis, National Technical University of Athens, Zografos, Greece, Michel Fillon, Université de Poitiers, Futuroscope Chasseneuil, France 1119: Reflections on Journal Bearings Per- formance with Surface Texturing Azzedine Dadouche, Martin J. Conlon, National Research Council Canada, Ottawa, Canada 983: Experimental Investigation on Hydrody- namic Parallel Surface Thrust Bearings with Textured Pads Yann Henry, Jean Bouyer, Michel Fillon, Université de Poitiers, Futuroscope Chasseneuil, France EC – ECOTRIB 2013 – Tribology of Machine Elements

MO1-EC1 Automotive Tribology 1 Room 10 16:30 – 18:30 814: The Effect of 3D Deformations of a Cylin- der Liner on the Tribological Performance of a Piston Ring-Cylinder Liner System Markus Söderfjäll, Andreas Almqvist, Roland Larsson, Patrik Isaksson, Andrew Spencer, Luleå University of Technology, Luleå, Sweden 1014: Film Thickness Predictions and Meas- urements of a Flexible Piston Skirt Bryn Littlefair, Miguel De La Cruz, Loughborough University, Loughborough, United Kingdom, Robin Mills, University of Sheffield, Sheffield, United Kingdom, Stephanos Theodossiades, Homer Rahnejat, Loughborough University, Loughborough, United Kingdom, Robert Dwyer‐Joyce, University of Sheffield, Sheffield, United Kingdom 1258: Identification of the Limit States of Tri- bological Systems to Estimate Failure Modes of Aviation Turbine Engines Marek Zboiński, Air Force Institute of Technology, Warszawa, Poland

4 WTC 2013 Technical Sessions Tuesday, September 10TH 1096: Nanointerface for Superior Tribological Properties of Silicon Carbide in Water Koshi Adachi, Tohoku University, Sendai, Japan ET - Ecotribology 162: Friction Based Renewable Fuel Technol- ogy TU1-ET2 Tribology for Energy Evgeny Deulin, Bauman Moscow State Technical Conservation II University, Moscow, Russian Federation Room 1 8:30 – 10:30 201: Hydration Lubrication at Solid Surfaces 649 – Keynote: MEMS/NEMS and Liran Ma, Tsinghua University, Beijing, China, BioMEMS/BioNEMS Materials and Devices Anastasia Gaisinskaya, Nir Kampf, Jacob Klein, and Biomimetics Weizmann Institute, Rehovot, Israel Bharat Bhushan, The Ohio State University, Columbus, OH, United States TU3-ET4 Environmentally Compatible Lubricants 1111: Influence of Ethanol on Piston Assembly Lubricant Composition and Friction in an Room 1 14:00 – 16:00 Automotive Gasoline Engine 1182: The Tribological Performance of Bio- Martin Priest, Prashan R. De Silva, Richard C. Coy, Based Room Temperature Ionic Liquid Lubri- University of Leeds, Leeds, United Kingdom, Robert I cants: A Possible Next Step in Biolubricant Taylor, Shell Research Ltd, Chester, United Kingdom Technology 137: Atomic-Scale Friction and Energy Dissi- Carlton J. Reeves, Pradeep L. Menezes, Michael R. pation in Multilayer Graphene Lovell, Tien‐Chien Jen, Sarah L. Garvey, Mark L. Hui Wang, Liang Xu, Yuan‐zhong Hu, Tsinghua Dietz, University of Wisconsin­Milwaukee, University, Beijing, China Milwaukee, WI, United States 127: Global Impact of Friction on Energy Con- 1250: Lubrication and Wear Characteristics of sumption, Environment and Economy Triolein and Tristearin under High Tempera- Kenneth Holmberg, Peter Andersson, Roope ture Condition Siilasto, VTT Technical Research Centre of Finland, Hiroki Mano, Atsushi Korenaga, Yuko Hiibi, Espoo, Finland, Ali Erdemir, Argonne National Tsuguyori Ohana, National Institute of Advanced Laboratory, Argonne, IL, United States Industrial Science & Technology (AIST), Tsukuba, Japan 245: CAE Simulation of IC Engine Friction Ming‐Tang Ma, Jianhong Li, Fuqiang Xu, AVL List 1314: Origins of Extreme Boundary Lubrica- Technical Center Co. LTD, Shanghai, China tion by Phosphatidylcholine Liposomes Raya Sorkin, Jacob Klein, Weizmann Institute of 348: Controllable Superlubricity of Glycerol Science, Rehovot, Israel Solution via Environment Humidity Zhe Chen, Liran Ma, Jinjin Li, Dan Guo, Yuhong Liu, 748: Environmental Problems of Lubricants Jianbin Luo, Tsinghua University, Beijing, China Chemistry Oleg P. Parenago, Russian Academy of Sciences, TU2-ET3 Environmentally Friendly Moscow, Russian Federation Tribology 477: Tribological Properties of Aluminium Al- Room 1 11:00 – 13:00 loys in Environmentally Acceptable Hydraulic Fluids 160: Tribochemistry of Stearic Acid and its Takuya Nakase, Tokyo University of Science, Tokyo, Lubricating Behavior Sensitivity to Base Oil Japan, Mathias Woydt, Federal Institute for Christine Matta, Sophie Loehle, Clotilde Minfray, Materials Research and Testing (BAM), Berlin, Thierry Le Mogne, Jean‐Michel Martin, École Germany, Shinji Kato, KYB Corporation, Kanagawa, Centrale de Lyon, Écully, France, Raphaele Iovine, Japan, Hironobu Oe, Shinya Sasaki, Tokyo University Carine Pizard, TOTAL, Solaize Research Center, of Science, Tokyo, Japan Solaize, France, Akira Miyamoto, Tohoku University, Sendai, Japan 182: Skin-friction Drag Reduction by Trans- verse Micro V-grooves on a Surface 991: Low Friction System Using Carbon Fiber Jiadao Wang, Bao Wang, Beibei Feng, Gang Zhou, Reinforced Plastics Darong Chen, Tsinghua University, Beijing, China Wataru Sato, Takanori Takeno, Koshi Adachi, Tohoku University, Sendai, Japan PS1-ET Posters 995: Surface Texture to Improve Friction Atrium 8:30 – 16:30 Properties by Forming Smoother Surface on Silicon-based Ceramics in Water 291: Direct Observation of Oil Displacement Yuta Nishikawa, Koji Noguchi, Takanori Takeno, by Water Flowing toward an Oil Nanogap Koshi Adachi, Tohoku University, Sendai, Japan Xiang Liu, Dan Guo, Tsinghua University, Beijing, China

5 Technical Sessions WTC 2013

1240: Vibration Energy Harvesting with Pie- Kingdom, Antoni Nargol, University Hospital of North zoelectric Generator Tees, Stockton on Tees, United Kingdom Giorgio Figliolini, Pierluigi Rea, University of Cassino 520: Details of the Wear Scar on Failed Metal- and Southern Lazio, Cassino (FR), Italy, Ruggero on-metal Hip Prostheses Gambatesa, MAD S.r.l., Roma, Italy Thomas Joyce, James Lord, David Langton, Newcastle University, Newcastle upon Tyne, United BT - Biotribology Kingdom, Antoni Nargol, University Hospital of North Tees, Stockton on Tees, United Kingdom TU1-BT2 Artificial Joints: Wear I 529: The Role of Surface Roughness on the Room 2 8:30 – 10:30 Initiation and Propagation of Fretting- 514: Could Tribology Explain Early Femoral corrosion of Cemented Femoral Stems Neck Fracture Following Hip Resurfacing? Michael Bryant, University of Leeds, Leeds, United Thomas Joyce, James Lord, David Langton, Kingdom, Richard Farrar, Robert Freeman, Ken Newcastle University, Newcastle upon Tyne, United Brummitt, DePuy International, Leeds, United Kingdom, Antoni Nargol, University Hospital of North Kingdom, Anne Neville, University of Leeds, Leeds, Tees, Stockton on Tees, United Kingdom, Derek Meek, United Kingdom Southern General Hospital, Glasgow, United Kingdom 751: The Influence of Continuous and Inter- 907: On the Load Transfer Mechanism in MOM mittent Sliding on the Release of Ions from Total Hip Prostheses with Self-directed Balls. Cobalt Chromium Surfaces Virgil Florescu, Institute of Civil Engineering, James Hesketh, Andrew Beadling, Duncan Dowson, Bucharest, Romania, Lucian Capitanu, Institute of Anne Neville, University of Leeds, Leeds, United Solid Mechanics of the Romanian Academy, Kingdom Bucharest, Romania 1205: Study of Innovative Surface Modifica- 1129: Prevent/Limit The Edge Loading in To- tions for Ti-13Nb-13Zr alloy: Assessment of tal Hip Replacement Wear and Corrosion Behavior Ehsanollah Torabi Kachousangi, Reyhaneh Caroline Richard, Université François Rabelais de Asadirad, Ken Mao, University of Warwick, Coventry, Tours, Tours, France, Geetha Manivasagam, Vellore United Kingdom Institute of Technology, Vellore, India, Jessem 272: Surface Wear Analysis of the Polyethyl- Landoulsi, Université Pierre et Marie Curie ­ Paris VI, ene Components of Ex-Vivo Knee Prostheses Paris, France Emma Kennard, Susan C. Scholes, Newcastle 273: Topographical Analysis of Femoral Com- University, Newcastle upon Tyne, United Kingdom, ponents of ex vivo Total Knee Replacements Rajkumar Gangadharan, David Weir, Jim Holland, Susan C. Scholes, Emma Kennard, Newcastle David Deehan, Freeman Hospital, Newcastle upon University, Newcastle upon Tyne, United Kingdom, Tyne, United Kingdom, Thomas J. Joyce, Newcastle Rajkumar Gangadharan, David Weir, Jim Holland, University, Newcastle upon Tyne, United Kingdom David Deehan, Freeman Hospital, Newcastle upon 418: Reciprocal Wear Patterns Reflect Unique Tyne, United Kingdom, Thomas J. Joyce, Newcastle Patient Specific Undersurface Tribological University, Newcastle upon Tyne, United Kingdom Behaviour in Knee Replacement Richard J. Holleyman, Susan Scholes, Emma TU3-BT4 Artificial Joints: Testing Kennard, Martin Bone, David Weir, Jim Holland, Room 2 14:00 – 16:00 Thomas Joyce, David Deehan, University of 163: First Wear Results from a Unique Multi- Newcastle upon Tyne, Newcastle upon Tyne, United Station Shoulder Joint Simulator Kingdom Simon Smith, Lisa Li, Garth Johnson, Thomas Joyce, 579: Boundary Lubrication of Stainless Steel Newcastle University, Newcastle upon Tyne, United and CoCrMo Materials Based on Phosphorous Kingdom or Boron Containing Additives 745: A Biotribo-acoustic Testing Method for Jincan Yan, Xiangqiong Zeng, Emile van der Heide, Ceramic Orthopaedic Biomaterials University of Twente, Twente, Netherlands, Tianhui Zikai Hua, Yongwei Fan, Shanghai University, Ren, Shanghai Jiao Tong University, Shanghai, China Shanghai, China TU2-BT3 Artificial Joints: Wear II 1266: Estimation of Wear Factors of MoM Hip Implants from Simulator Tests Room 2 11:00 – 13:00 Lorenza Mattei, Francesca Di Puccio, Enrico Ciulli, 503 – Keynote: The Correlation between Wear University of Pisa, Pisa, Italy Volumes and Ion Concentrations in Metal-on- 609: Pre-clinical Testing of Total Disc Re- metal Hip Resurfacings placements Using a Stratified Approach Thomas Joyce, James Lord, David Langton, Philip J. Hyde, John Fisher, Richard M. Hall, Newcastle University, Newcastle upon Tyne, United University of Leeds, Leeds, United Kingdom

6 WTC 2013 Technical Sessions

1142: Wear of PEEK and CFR-PEEK against PS1-BT Posters Metallic Counterfaces under Different Contact Atrium 8:30 – 16:30 Pressure Conditions Claire L. Brockett, Louise M. Jennings, John Fisher, 140: Preparation and Tribological Properties University of Leeds, Leeds, United Kingdom of Grafted Polymer Brushes on Anodic Oxi- dized Titanium Alloy 858: Wear Prediction of Acetabulum Inserts Kun Wang, Dangsheng Xiong, Yuanyuan Yang, due to Multiple Human Routine Activities Nanjing University of Science and Technology, Lucian Capitanu, Institute of Solid Mechanics of the Nanjing, China Romanian Academy, Bucharest, Romania, Virgil Florescu, Institute of Civil Engineering, Bucharest, 174: Tribological Properties of UHMWPE Romania Grafted with AA as Artificial Joint Yaling Deng, Dangsheng Xiong, Jiabo Jin, Nanjing TU4-BT5 Artificial Joints: Surfaces, University of Science and Technology, Nanjing, China Structure and Coatings 284: Study of Nanocrystallines on Artificial Room 2 16:30 – 18:50 Hip Implants Surfaces Induced by Bio-tribo- corrosion Processes 607: The Effects of DLC Coatings on Recipro- Yu Yan, Linghe Wang, Yanjing Su, Lijie Qiao, cating Sliding Conditions and Wear of CoCrMo University of Science and Technology Beijing, Beijing, Alloy China Konttinen T. Yrjö, Tiainen Velli‐Matti, ORTON Research Institute, Helsinki, Finland, Eva Zdravecká, 300: The influence of Protein Adsorption on Miroslav Ondáč, Technical University in Košice, Generation of Fretting Wear at the Sem– Košice, Slovakia, Marian Marton, Marian Vojs, cement Interface Marian Veselý, Slovak University of Technology, Hongyu Zhang, Tsinghua University, Beijing, China, Bratislava, Slovakia Shaohua Zhang, State Key Laboratory of Tribology, Beijing, China 1235: Surface Texturing in Artificial Hip Joints for Friction and Wear Control I: Experiments 333: Conformation and Formation Mechanism Patrick S.M. Dougherty, Gagan Srivastava, Recep of Durable Self-assembled HDPA Bilayers on Onler, Burak Ozdoganlar, C. Fred Higgs, Carnegie Titanium Alloy Substrate Mellon University, Pittsburgh, PA, United States Caixia Zhang, Yuhong Liu, Pengxiao Liu, State Key Laboratory of Tribology, Beijing, China, Shizhu Wen, 1237: Surface Texturing in Artificial Hip Joints State Key Laboratory of Tribology, Beijing, China for Friction and Wear Control II: Modeling Gagan Srivastava, Patrick S.M. Dougherty, C. Fred 431: Effect of CPP-ACP on the Remineraliza- Higgs, Carnegie Mellon University, Pittsburgh, PA, tion of Acid-eroded Human Tooth Enamel: United States Nanomechanical Properties and Microtribo- logical Behaviour Study 303: Tribological and Bio-compatible Proper- Liang Zheng, Jing Zheng, Linmao Qian, Zhongrong ties of Combined Micro and Nano Hierarchical Zhou, Southwest Jiaotong University, Chengdu, China Texturing Co-Cr-Mo Surface Liguo Qin, Bin Liu, Ping Lin, Hui Zhang, Guangneng 493: Study of Lubricating Mechanisms in Arti- ficial Hip Joints Dong, Xi’an Jiaotong University, Xi’an, China Martin Vrbka, Ivan Křupka, Martin Hartl, Brno 439: To Increase the Hydrophobicity, Non- University of Technology, Brno, Czech Republic, Jiří stickiness and Wear Resistance of DLC Sur- Gallo, University Hospital Olomouc, Olomouc, Czech face by Surface Texturing Using Laser Abla- Republic tion Process 536: Comparative Friction and Wear Behavior P.W. Shum, Z.F. Zhou, K.Y. Li, City University of Hong between Titanium Alloys Ti-6Al-7Nb and Ti- Kong, Hong Kong 6Al-4V 447: Tribological Properties of UHMWPE Mamoun Fellah, Mohammed Labaïz, Omar Assala, Grafted with PMPC Brushes at High Contact Badji Mokhtar University, Annaba, Algeria, Alain Stress Iost, Laboratory of metallurgy and materials science Dangsheng Xiong, Yaling Deng, Yuanyuan Yang, ENSAM, Lille, France Nanjing University of Science and Technology, 551: Influence of Sn in the Tribocorrosion and Nanjing, China Electrochemical Behavior of β Titanium Bio- 309: Behavior of Adsorbed Albumin Film on medical Alloys Obtained by Powder Metal- CoCrMo Alloy under In-situ Observation lurgy Kazuhiro Nakashima, Yoshinori Sawae, Teruo Virginia Guiñón Pina Pina, Alba Dalmau, Francisco Murakami, Kyushu University, Fukuoka, Japan, Devesa, Vicente Amigó, Anna Igual Muñoz, Stefano Mischler, École Polytechnique Fédérale de Universidad Politécnica de Valencia, Valencia, Spain Lausanne, Lausanne, Switzerland 631: A lamellar-roller-bearings Lubrication Model on the Cartilage Surface

7 Technical Sessions WTC 2013

Zenon Pawlak, Tribochemistry Consulting, Salt Lake Structure of Matter ISM­CNR, Roma, Italy, Santina City, UT, United States, Wieslaw Urbaniak, Kazimierz Battaglia, Saverio Affatato, Istituto Ortopedico Wielki University, Bydgoszcz, Poland, Kehinde Q. Rizzoli, Bologna, Italy, Randa Ishak, University of Yusuf, I.O. Afara, Adekunle Oloyede, Queensland Pisa, Pisa, Italy, Simone Dinarelli, Institute of University of Technology, Brisbane, Australia Structure of Matter ISM­CNR, Roma, Italy, Heinz 655: Critical Squeaking Friction with Ceramic Amenitsch, Academy of Science of Austria, Graz, Bearings Austria N. Fan, M.M. Morlock, N.E. Bishop, G. Huber, N. Hoffman, Michele Ciavarella, TUHH Hamburg BM - Biomimetics University of Technology, Hamburg, Germany, G.X. PS1-BM Posters Chen, Southwest Jiaotong University, Chengdu, China, F. Witt, TUHH Hamburg University of Technology, Atrium 8:30 – 16:30 Hamburg, Germany 1054: Wetting and Tribological Behavior of 685: Measurement of Protein Adsorption in Micro, Nano & Hierarchical Patterned Poly- Thin Film Lubrication of Simulated Synovial Methyl-Metha-Acrylic (PMMA) Surfaces Fluids Shuxue Piao, Nagaraj Chelliah Machavallvan, Il‐Joo Feng Guo, Xia Li, Qingdao Technological University, Cho, Kyung‐Young Jhang, Eui‐Sung Yoon, Republic of Qingdao, China, Patrick Wong, City University of Korea Hong Kong, Hong Kong, China 776: Biolox® Delta-on-Biolox® Delta Ceramic ST – Surface Tribology Hip Retrievals: Raman and Fluorescence TU1-ST3 Coatings 2 Characterization Enrico Modena, Paola Taddei, University of Bologna, Room 3 8:30 – 10:30 Bologna, Italy, Saverio Affatato, Rizzoli Orthopaedic 144: Effect of Intercalated Compounds into Institute, Bologna, Italy MoS2 Matrices on Mechanical and Tribological 835: Sensibility Evaluation Based on the Properties Measurement of Friction between Finger Skin Nathalie M. Renevier, University of Central and Case of Cellular Phone Lancashire, Preston, United Kingdom, Xiaoling Li, Jin‐Hwak Park,, Young‐Ze Lee, Sungkyunkwan University of Birmingham, Birmingham, United University, Suwon, Republic of Korea Kingdom, Xiaoling Zhen‐Teer, Miba, Droitwich, 879: Tribological Tests of Particular Dental United Kingdom Materials 149: The Effect of Coating Characteristics on Anna Dobrowolska, Wojciech Wieleba, Wrocław the Performance of a-c:H And ta-c Coatings University of Technology, Wrocław, Poland, Tomasz Lauri Kilpi, Peter Andersson, Timo J. Hakala, Helena Dabrowa, Wrocław Medical University, Wrocław, Ronkainen, VTT Technical Research Centre of Poland Finland, Espoo, Finland, Sanna Tervakangas, DIARC­ Technology Inc., Espoo, Finland, Jussi Oksanen, Jari 994: The Experimental Methods of Measuring and Calculating Friction in Knee Endoprosthe- Koskinen, Aalto University, Espoo, Finland sis 190: Friction Characteristics between CVD Piotr Kowalewski, Wojciech Wieleba, Dymitry Diamond Film and Stainless Steel under Un- Capanidis, Wrocław University of Technology, lubricated Vacuum Condition Wrocław, Poland Kenta Nakamura, Kenji Tamaoki, Tokyo 1123: Procedural Approach on Using XRD to Metropolitan Industrial Technology Research Qualify the Surface Roughness Institute, Tokyo, Japan, Kazutaka Kanda, Fukui Giovanni Berti, University of Pisa, Pisa, Italy, University of Technology, Fukui, Japan Francesco De Marco, Maria E. Del Seppia, XRD­Tools 195: High Temperature Tribological Behavior s.r.l., Pisa, Italy of ta-C and a-C:H Coatings 1152: Friction Determination between Dental Xingrui Deng, Hiroyuki Kousaka, Takayuki Tokoroyama, Noritsugu Umehara, Nagoya Enamel and Glass in Different Conditions University, Nagoya, Japan Gheorghe Frunza, “Stefan cel Mare” University of Suceava, Suceava, Romania, Mihai C. Frunza, 382: Assessment of the Thermo-Oxidative Stability of Silicon Oxide-Doped Diamond- University of Medicine and Pharmacy “Carol Davila”, Like Carbon by In Situ Environmental X-ray Bucharest, Romania Photoelectron Spectroscopy 1265: Experimental and Numerical Analysis of Filippo Mangolini, James Hilbert, Jennifer R. Lukes, UHMWPE Acetabular Cups after Wear Test: Robert W. Carpick, University of Pennsylvania, a Preliminary Study Philadelphia, PA, United States Francesca Di Puccio, Lorenza Mattei, University of 718: Zirconium Carbonitrides for Tribological Pisa, Pisa, Italy, Mario D'Acunto, Institute of Applications

8 WTC 2013 Technical Sessions

Javier Barriga, Unai R. de Gopegui, Cristina by Electron Irradiation in Electron Cyclotron Zubizzareta, IK4­Tekniker, Eibar, Spain Resonance Plasma Cheng Chen, Dongfeng Diao, Xi’an Jiaotong TU1-ST4 Contact Mechanics 2 University, Xi’an, China Room 4 8:30 – 10:30 1086: Influence of Loading Rate on Running-in 23: Method of Reduction of Dimensionality. Behavior of Diamond-like Carbon Films Foundations and Case Studies: Rolling Noise, Tomomi Honda, Keitaro Yoshida, Toshiro Miyajima, Friction of Elastomers and Ultrasonic Actua- Yoshiro Iwai, University of Fukui, Fukui, Japan, tors Takatoshi Shinyoshi, Yosio Fuwa, Toyota Motor Co. Valentin L. Popov, Mikhail Popov, Qiang Li, Berlin Ltd., Toyota, Japan University of Technology, Berlin, Germany, Andrey 1322: Design and Preparation of Nanostruc- Dimaki, Russian Academy of Sciences, Tomsk, Russian tured Carbon Films and High-tech Applica- Federation, Ha X. Nguyen, University of Oldenburg, tions Oldemburg, Germany, Elena Teidelt, Berlin Liping Wang, Chinese Academy of Science, Lanzhou, University of Technology, Berlin, Germany China 136: Deterministic Analysis of Contacts - From Roughness to Inhomogeneity TU2-ST6 Contact Mechanics 3 Yuan‐zhong Hu, Tsinghua University, Beijing, China Room 4 11:00 – 13:00 821: The Multifractal Analysis of the Fatigue 387: Measurement of Friction Coefficient In- Fracture under the Process of Friction volved in Cylindrical Gear Teeth Meshing Arif M. Pashayev, Ahad Kh. Janahmadov, Natig G. Vincenzo Solimine, Davide Crivello, Oerlikon Javadov, M.Y. Javadov, Azerbaijan Engineering Graziano, Rivoli (TO), Italy Academy, Baku, Azerbaijan 452: Examination of the Surface of a Ball 909: A Numerical and Experimental Model for Bearing Used in an Automobile Transmission the Tribological Design of a Variable Dis- for a Long Period placement Oil Pump Kenji Matsumoto, Honda R & D Co.,Ltd, Haga, Japan, Andrea Barbetti, Maurizio Moriglia, Matteo Naoaki Yoshida, Kyushu University, Kasuga, Japan, Gasperini, Nicola Novi, Raffaele Squarcini, Pierburg Akira Sasaki, Maintek Consultant of Maintenance Pump Technology SpA, Livorno, Italy Technology, Yokohama, Japan 943: Modeling of Friction in Contact of Viscoe- 586: Tribological Aspects of Diagnosis of lastic Bodies with Textured Surfaces Technical Condition of Aircraft Engines Re- Irina Goryacheva, Russian Academy of Sciences, ducer-drives, Conducted in Long-term Usage Moscow, Russian Federation Lyudmila Shabalinskaya, Valery Zhuk, Central TU2-ST5 Coatings 3 Institute of Aviation Motors ­ P.I. Baranov, Moscow, Russian Federation Room 3 11:00 – 13:00 799: Digital Image Correlation to Analyse 478: Role of Temperature on the Ultra-low Stick-slip Behaviour of Tyre Tread Block Friction and Wear of Diamond-like Carbon Ari Tuononen, Aalto university, Espoo, Finland under Oil Boundary Lubrication 1020: Influence of the Pitch Point Position on Haci A. Tasdemir, Masaharu Wakayama, Takayuki Tooth Flanks Wear Tokoroyama, Hiroyuki Kousaka, Noritsugu Mileta Ristivojevic, Tatjana Lazovic, Aleksandar Umehara, Nagoya University, Nagoya, Japan, Yutaka Vencl, University of Belgrade, Belgrade, Serbia Mabuchi, Tsuyoshi Higuchi, Nissan Motor Co., Japan 1030: Mechanical and Thermal Contact of 853: Load-dependent Friction Behavior of Regular Surfaces with Gas-Filled Interstitial Metal Diamondlike-carbon Nano-composite Gaps Coatings Kostyantyn Chumak, Bogdan Slobodian, Rostyslav Minoru Goto, Ube National College of Technology, Martynyak, National Academy of Sciences of Ukraine, Ube, Japan, Julien Fontaine, Sandrine Bec, École Lviv, Ukraine Centrale de Lyon, Écully, France, Kosuke Ito, Nihon University, Koriyama, Japan, Takanori Takeno, TU3-ST7 Coatings 4 Hiroyuki Miki, Tohoku University, Sendai, Japan Room 3 14:00 – 16:00 887: Molecular Dynamics Simulations of the Growth of Hydrogenated Amorphous Carbon 910: Physical and Chemical Processes Affect- Films ing Performance of Super-low Friction Carbon Yinan Chen, Tianbao Ma, Tsinghua University, Nitride Coatings in Various Gaseous Environ- Beijing, China ments Feodor M. Borodich, Cardiff University, Cardiff, 959: Graphene Nanocrystal Size Effect on United Kingdom Frictional Behavior of Carbon Film Fabricated

9 Technical Sessions WTC 2013

1010: Effect of Relative Humidity on Super- Avio Propulsione Aerospaziale SpA, Rivalta (TO), low Friction of Carbon Nitride Coatings in N2 Italy Gas Environment Naohiro Yamada, Kyosuke Sato, Takanori Takeno, TU4-ST9 Coatings 5 Koshi Adachi, Tohoku University, Sendai, Japan Room 3 16:30 – 18:50 689: PVD Coatings for Automotive & Preci- 18: Super Low Friction of Fullerene Like Car- sion Wear Components bon Films and Application en Engine for En- Ruud Jacobs, Dave Doerwald, Roel Tietema, Thomas ergy Saving and Emission Reduction Krug, Hauzer Techno Coating BV, Venlo, Netherlands Junyan Zhang, Chinese Academy of Sciences, 356: Effect of S/Mo Ratio on Friction and Lanzhou, China Wear Characteristics in Air of Molybdenum 42: Spectroscopic Study of Boundary Lubri- Disulfide Sputtered Films cated WDLC Coatings Kazunari Matsuzaki, Iwao Sasaki, Michiaki Ikeda, Liuquan Yang, Anne Neville, University of Leeds, Kenji Matsuda, Kyushu Institute of Technology, Leeds, United Kingdom, Alisdair Brown, Paul Kitakyushu, Japan Ransom, Afton Chemical Limited, Bracknell, United 403: Tribological Properties of HVOF Sprayed Kingdom, Ardian Morina, University of Leeds, Leeds, WC-Ni Coatings United Kingdom Monika Madej, Dariusz Ozimina, Kielce University of 123: Super Low Friction of DLC Coating with Technology, Kielce, Poland Selected Lubricant 135: Nanoparticle-wall Collision in Fluid Jet Makoto Kano, Kentaro Yoshida, Kanagawa and its Effect on Material Removal Industrial Technology Center, Ebina, Japan, Jean Xuefeng Xu, Beijing Forestry University, Beijing, Michel Martin, Maria Isabel De Barros Bouchet, China, Jianbin Luo, Tsinghua University, Beijing, École Centrale de Lyon, Écully, France China 145: Influence of Hydrogen Content on DLC Tribological Behavior: Tests in Mineral Base TU3-ST8 Surface Evolution and Wear 1 Oil Room 4 14:00 – 16:00 Choumad Ould, Christophe Héau, IREIS­HEF, 122: Quantification of Micro-pitting During Andrézieux­Bouthéon, France, Julien Fontaine, École Running-in Using 3D Surface Parameters Centrale de Lyon, Écully, France, Christophe Donnet, Stephane Tchoundjeu Ngatchou, Francois Robbe‐ Université Jean Monnet, Saint­Etienne, France Valloire, Tony Da Silva Botelho, Supméca, Saint­ 279: Relation between Deposition Parameters Ouen, France, Frederic Jarnias, TOTAL, Research and Properties of DLC Films by Using CVD Centre of Solaize, Solaize, France with Pulsed-DC Plasma 441: Experimental Investigation of the Tri- Hirotaka Ito, Kenji Yamamoto, Kobe Steel LTD., bology of the Dimple/Gimbal Interface Kobe, Japan Youyi Fu, Young Woo Seo, Benjamin Suen, Karcher 485: Characteristics of the Transformed Layer Morris, Frank Talke, University of California, San of DLC after Friction Testing under Boundary Diego, La Jolla, CA, United States Lubrication in Additive-free Mineral Based Oil 702: The Plastic Deformation and Wear of Nor A. B. Masripan, Nagoya University, Nagoya, Copper in Micro-Slurry-jet Erosion Test Japan, Yosuke Tsukiyama, Niigata University, Masayoshi Abo, Masaki Kobayashi, Masaru Higa, Niigata, Japan, Kenji Ohara, Noritsugu Umehara, Satoshi Kakunai, University of Hyogo, Himeji, Japan Hiroyuki Kousaka, Takayuki Tokoroyama, Nagoya University, Nagoya, Japan, Shigeru Inami, Koji Zushi, 888: Improvement of the Cavitation Erosion Daido Metal Co. Ltd, Inuyama, Japan Resistance of an UNS S31803 Duplex Stainless Steel by High Temperature Gas Nitriding 754: Tribological Properties of Microwave As- Luis B. Varela Jiménez, Luis Espitia, André sisted PECVD DLC Coatings Tschiptschin, University of São Paulo, São Paulo, Louise Austin, Anne Neville, Tomasz Liskiewicz, Brazil Leeds University, Leeds, United Kingdom 1105: Fatigue Wear of Elastic Coatings in Con- TU4-ST10 Tribocorrosion tact with Periodic System of sliders: Modeling for Constant and for Time-dependent Load Room 4 16:30 – 18:50 Elena Torskaya, Russian Academy of Sciences, 553: Corrosive Wear Behavior of the Carbon Moscow, Russian Federation Steel in Oil-water System 1209: Design of a Twin Disc Test Machine Deli Duan, Shu Li, Ziyang Hu, Chinese Academy of Paolo Repola, Salvatore Manconi, Michele Amorena, Sciences, Shenyang, China AM Testing srl, San Piero a Grado (PI), Italy, Enrico 720: Tribocorrosion Response of TaN Coat- Ciulli, Università di Pisa, Pisa, Italy, Marco Facchini, ings in Biological Environments

10 WTC 2013 Technical Sessions

Raquel Bayón, Lucía Mendizabal, Unai R. de 70: Development of a New Wear Model for Gopegui, Javier Barriga, IK4­Tekniker, Eibar, Spain the Study of Wheel and Rail Profile Evolution 1008: Study of Sliding Bearing Lubricated in on Complex Railway Nets Ultra Pure Water Mirko Ignesti, Alice Innocenti, Lorenzo Marini, Kenichi Sugiyama, Junya Kawabata, Ebara Enrico Meli, Andrea Rindi, Florence University, corporation, Fujisawa, Japan Florence, Italy 1100: Tribocorrosion of ZrN and TiAlN Hard 72: Generalised Energy Model of Sliding Fric- Coatings against Alumina Reinforced Poly- tion Coefficient and Regularities of Tribosys- mers tem Evolution Josef Brenner, Hakan Gocerler, Manel Rodriguez Sergey V. Fedorov, Kaliningrad State Technical Ripoll, AC2T Research GmbH, Wiener Neustadt, University, Kaliningrad, Russian Federation Austria 86: Adhesive Wear and Static Friction of an 1147: Tribocorrosive Wear Phenomena Oc- Elastic-plastic Cylinder in Contact with a Rigid curring in Oilfield Application Flat Andreas Trausmuth, Ewald Badisch, Fabian Weigel, Xi Shi, Aizhong Wu, Changming Zhu, Shanghai Jiao Rainer Jahn, AC2T Research GmbH, Wiener Neustadt, Tong University, Shanghai, China Austria, Gerald Zehethofer, OMV Exploration & 141: Thermodynamics and Friction Mechanism Production GmbH, Gänserndorf, Austria, Thomas Analysis of DLC Films on H13 Steel under Vogl, Voestalpine Tubulars GmbH & Co KG, Kindberg­ High Temperature Aumühl, Austria Qunfeng Zeng, Xi’an Jiaotong University, Xi’an, China, 488: Corrosion and Tribological Properties of Osman Eryilmaz, Argonne National Laboratory, Compositionally Gradient CrNx Coatings in Argonne, IL, USA, Guangneng Dong, Li Luo, Xi’an Water Solutions Jiaotong University, Xi’an, China Fei Zhou, Qianzhi Wang, Jizhou Kong, Nanjing University of Aeronautics and Astronautics, Nanjing, TU2-FW3 Theory of Friction and Wear, China Numerical Simulation 2 834: Corrosion and Tribological Behavior of Room 5 11:00 – 13:00 DLC Films on Titanium Alloy 214: A Friction Physical Model for the Estima- Tiago Falcade, Federal University of Rio Grande do tion of Hysteretic Dissipations Arising at the Sul, Porto Alegre, Brazil, Viviane Turq, Jean Pierre Contact between Rigid Indenters and Visco- Bonino, Florence Ansart, Université de Toulouse, Elastic Materials Toulouse, France, Célia de Fraga Malfatti, Federal Flavio Farroni, Michele Russo, Riccardo Russo, University of Rio Grande do Sul, Porto Alegre, Brazil Francesco Timpone, University Of Naples Federico II, FW – Dry Friction and Wear Naples, Italy 225: Kinematic Analysis of Particles in Three- TU1-FW2 Theory of Friction and Wear, Body-Contacts Numerical Simulation 1 Kristin M. de Payrebrune, Matthias Kröger, Technische Universität Bergakademie Freiberg, Room 5 8:30 – 10:30 Freiberg, Germany 347 – Keynote: First-Principles and Tight- 271: Development and Accuracy of Ultra- Binding Quantum Chemical Molecular Dynam- Accelerated Quantum Chemical Molecular ics Studies for Low Friction Mechanism of Dynamics Method for a Variety of Tribological Carbon Nitride Coatings Applications Seiichiro Sato, Shandan Bai, Takeshi Ishikawa, Yuji Akira Miyamoto, Ryuji Miura, Ai Suzuki, Nozomu Higuchi, Nobuki Ozawa, Koshi Adachi, Tohoku Hatakeyama, Sumio Kozawa, Mark C. Williams, University, Sendai, Japan, Jean‐Michel Martin, École Tohoku University, Sendai, Japan, Sophie Loehle, Centrale de Lyon, Écully, France, Momoji Kubo, Clotilde Minfray, Jean M. Martin, École Centrale de Tohoku University, Sendai, Japan Lyon, Écully, France 12: Assessment of Sliding Friction of a Nanos- 345: Friction Model for the Counter Surface tructured Solid Lubricant Film by Numerical Design of Pneumatic Cylinder Seals Simulation with the Method of Movable Cellu- Martin Zimmermann, Leibniz Universität Hannover, lar Automata (MCA) Hannover, Germany, Armin Hermann, Matthias Werner Österle, Federal Institute for Materials Wangenheim, Freudenberg Sealing Technologies, Research and Testing, Berlin, Germany, Andrey I. Schwalmstadt, Germany Dmitriev, Institute of Strength Physics and Materials Science, Tomsk, Russian Federation, Heinz Kloß, 389: Wear of Supported Graphene Federal Institute for Materials Research and Testing, Andreas Klemenz, Fraunhofer Institute for Berlin, Germany Mechanics of Materials IWM, Freiburg, Germany, Lars Pastewka, Johns Hopkins University, Baltimore,

11 Technical Sessions WTC 2013

MD, United States, Arnaud Caron, Balakrishna S. Marco Reguzzoni, Università di Modena e Reggio Ganeshamurty, Roland Bennewitz, INM­Leibnitz Emilia, Modena, Italy, Annalisa Fasolino, Radboud Institute for new Materials, Saarbrücken, Germany, University, Nijmegen, Netherlands, Elisa Molinari, Michael Moseler, University of Freiburg, Freiburg, Maria C. Righi, Università di Modena e Reggio Emilia, Germany Modena, Italy 392: Onset and Evolution of the Sliding: Key 665: Ultralow Friction of H and F-terminated Role of the Local Contact Dynamics DLC Films under UHV. A Computational Mariano Di Bartolomeo, ‘‘La Sapienza’’ University of Study Rome, Rome, Italy, Francesco Massi, Université de Shandan Bai, Seiichiro Sato, Takeshi Ishikawa, Yuji Lyon, Villeurbanne, France, Laurent Baillet, Joseph Higuchi, Nobuki Ozawa, Koshi Adachi, Tohoku Fourier University, Grenoble, St. Martin D’Heres, University, Sendai, Japan, Jean Michel Martin, École Centrale de Lyon, Écully, France, Momoji Kubo, France, Annalisa Fregolent, Antonio Culla, ‘‘La Tohoku University, Sendai, Japan Sapienza’’ University of Rome, Rome, Italy, Yves 710: Non-linear Hysteretic Instability in Ro- Berthier, Université de Lyon, Villeurbanne, France tating Machinery TU3-FW4 Theory of Friction and Wear, Francesco Sorge, Università di Palermo, Palermo, Numerical Simulation 3 Italy 866: Modal Dynamic Instabilities Generated by Room 5 14:00 – 16:00 Frictional Contacts 426: Influence of Different Deformation Prop- Jacopo Brunetti, Francesco Massi, Aurélien Saulot, erties of a Friction Pair on the Real Contact INSA­Lyon, Villeurbanne, France, Walter Area under the Thermo- mechanical Coupling D'Ambrogio, Università di Roma "La Sapienza", Jianmeng Huang, Chenghui Gao, Fuzhou University, Roma, Italy Fuzhou, China 886: Role of Damping on Contact Instability 554: Renormalization Group Approach to Dis- Scenarios sipative System Davide Tonazzi, Francesco Massi, Antonio Culla, Shoichi Ichinose, University of Shizuoka, Shizuoka, Annalisa Fregolent, "La Sapienza" University of Japan Rome, Rome, Italy, Yves Berthier, INSA­Lyon, 563: Transient Thermal Diffusion in Elliptic Villeurbanne, France Contacts 588: Table Tennis Rubber: Tribological Char- Elisabetta Fava, Marco Barbieri, Università di acterization Modena e Reggio Emilia, Modena, Italy Michael Varenberg, Technion – IIT, Haifa, Israel, 571: A Mesoscopic Model for the Wear in Tet- Alexander Varenberg, Bateman Litwin Co., Yokneam, rahedral Amorphos Carbon under Shear Israel Julian von Lautz, Lars Pastewka, Michael Moseler, 668: Temperature and Velocity Dependences Fraunhofer Institute for Mechanics of Materials IWM, in the Tomlinson/Prandtl Model for Atomic Freiburg, Germany Sliding Friction 584: Load-dependent Friction Behaviors and Sergio Manzi, Octavio Furlong, Universidad Nacional Structural Transition Kinetics of Amorphous de San Luis, San Luis, Argentina, Wilfred Tysoe, Carbon Films University of Wisconsin­Milwaukee, Milwaukee, WI, Tian‐Bao Ma, Tsinghua University, Beijing, China United States 1036: Effect of Choice of Doping Element on the Sliding Mechanisms of Sputtered WS LA – Lubricants and Additives Coatings – a High Resolution TEM/EELS Study TU1-LA2 Solid Lubricants Fredrik Gustavsson, Uppsala University, Uppsala, Sweden, Matthieu Bugnet, McMaster University, Room 6 8:30 – 10:30 Hamilton, Canada, Tomas Polcar, University of 741: Advances in Novel Nanolubrication Addi- Southampton, Southampton, United Kingdom, tives for Improved Friction and Wear Proper- Albano Cavaleiro, University of Coimbra, Coimbra, ties Portugal, Staffan Jacobson, Uppsala University, Ali Erdemir, Argonne National Laboratory, Argonne, Uppsala, Sweden IL, United States 919: ToF-SIMS Investigation of MoS2 Based TU4-FW5 Theory of Friction and Wear, Coatings after Friction Test under Vacuum Numerical Simulation 4 Guillaume Colas, Aurélien Saulot, David Philippon, Room 5 16:30 – 18:50 Claude Godeau, Yves Berthier, INSA­Lyon, 600: Frictional Properties of Multilayer Gra- Villeurbanne, France, Didier Léonard, Université phene by Ab initio and Classical Molecular Claude Bernard­Lyon 1, Villeurbanne, France Dynamics Calculations

12 WTC 2013 Technical Sessions

1038: Influence of Surface Roughness in MoS2- when Lubricating Ferrous and Aluminium- nanotube-assisted Lubrication of Self-mated Silicon Surfaces DLC and Steel Contacts Michael Burkinshaw, Cummins Turbo Technologies, Janez Kogovšek, University of Ljubljana, Ljubljana, Huddersfield, United Kingdom, Anne Neville, Ardian Slovenia, Maja Remškar, Jožef Stefan Institute, Morina, University of Leeds, Leeds, United Kingdom, Ljubljana, Slovenia, Mitjan Kalin, University of Andrew Greenall, Shell Global Solutions, Hamburg, Ljubljana, Ljubljana, Slovenia Germany, Mike Sutton, Lubrizol Limited, Derby, 952: Characteristics of Electroconductive Solid United Kingdom Lubricant Films for Space Applications 726: New Biofuel for Low Friction in Piston Koji Matsumoto, Japan Aerospace Exploration Ring Cylinder Liner Contact Agency, Chofu, Japan, Ayaka Takahashi, Teikyo Cyrielle Forest, Maria‐Isabel De Barros Bouchet, University, Utsunomiya, Japan, Hiroshi Shiomi, École Centrale Lyon, Écully, France, Michaël Mazarin, Satomi Kawamoto, Japan Aerospace Exploration TOTAL Supply & Marketing, Solaize, France, Jean‐ Agency, Chofu, Japan Michel Martin, École Centrale Lyon, Écully, France 1149: Tribological and Electrical Contact Be- havior of Cu-DLC Nanocomposite Coating on TU3-LA4 Tribochemistry II Copper-based Substrate Room 6 14:00 – 16:00 Ryoichi Hombo, DENSO Corporation, Kariya, Japan, 1023 – Keynote: Decomposition of Hydrocar- Takanori Takeno, Tohoku University, Sendai, Japan, bon Oil on Nascent Steel Surface During Lu- Julien Fontaine, École Centrale de Lyon, Écully, brication France, Hiroyuki Miki, Tohoku University, Sendai, Shigeyuki Mori, I. Tada, Hidetaka Nanao, Kimihiro Japan, Naoki Kato, Takahiro Nozu, Naruhiko Kobayashi, Iwate university, Morioka, Japan Inayoshi, DENSO Corporation, Kariya, Japan, Michel 332: Atomistic Simulations of Tribochemical Belin, École Centrale de Lyon, Écully, France Reactions at Carbon Surfaces 1026: Chemical Characterization of Boundary Gianpietro Moras, Lars Pastewka, Narasimham Films by TOF-SIMS Mulakaluri, Peter Gumbsch, Michael Moseler, Hidetaka Nanao, Shigeyuki Mori, Iwate university, Fraunhofer Institute for Mechanics of Materials IWM, Morioka, Japan Freiburg, Germany TU2-LA3 Tribochemistry I 833: Lubricant Friction Modifier Performance Retention – Tribological Studies Room 6 11:00 – 13:00 Frank J. DeBlase, Faith A. Corbo, Chemtura 971 – Keynote: Three-body Tribocorrosion Corporation, Naugatuck, CT, United States Studies of Multiphase Alloys – Benefits and 706: The Influence of Boundary Lubrication Limitations Film on the Micropitting of Gears Grazyna Stachowiak, Mobin Salasi, Gwidon Takuya Ohno, Yukitoshi Fujinami, Masahiro Stachowiak, Curtin University, Bentley, Australia Kobessho, Idemitsu Kosan Co.,Ltd., Ichihara, Japan 87: Antagonism between Phosphites and Sul- 208: The Application of Quantitative Struc- fides Additives explained by Gas Phase Lubri- ture Tribo-ability Relationship Model cation Xinlei Gao, Wuhan Polytechnic University, Wuhan, Maria Isabel De Barros Bouchet, École Centrale de China, Kang Dai, South­Central University for Lyon, Écully, France, Samuel Mambingo‐Doumbe, Nationalities, Wuhan, China, Wanzhen Gao, Wuhan TOTAL company, Solaize, France, Thierry Le‐Mogne, Research Institute of Materials Protection, Wuhan, École Centrale de Lyon, Écully, France, Alain Bouffet, China, Zhan Wang, Tingting Wang, Wuhan TOTAL company, Solaize, France, Jean‐Michel Polytechnic University, Wuhan, China Martin, École Centrale de Lyon, Écully, France 1034: Viscosity Effects in Wet Clutch Systems 1197: MS Tribometry for the Study of Lubri- Alexander Grafl, Astrid Lebel, AC2T Research GmbH, cants Wiener Neustadt, Austria Edurne Berriozabal, Marcello Conte, Amaya Igartua, IK­4 Tekniker, Eibar, Spain TU4-LA5 Additives I 580: The Tribological Performance, the Tribo- Room 6 16:30 – 18:50 chemical Analysis of Novel Borate Esters as 45: Size Controlled Preparation of Nickel Lubricant Additives in Vegetable Oil Nanoparticles in Base Oil and Evaluation of Jincan Yan, Shanghai Jiao Tong University, Shanghai, their Tribological Properties China, Xiangqiong Zeng, Emile van der Heide, Yanfen Chen, Shengmao Zhang, Guangbin Yang, University of Twente, Twente, Netherlands, Tianhui Pingyu Zhang, Zhijun Zhang, Henan University, Ren, Shanghai Jiao Tong University, Shanghai, China Kaifeng, China 701: The Tribological Characteristics of ZDDP, 364: Participation of Suspended Nanoparticles Detergent and an Organic Antiwear Additive in Tribofilm Formation

13 Technical Sessions WTC 2013

Juozas Padgurskas, Raimondas Kreivaitis, A. 121: Rust Preventing Properties of Amino Ac- Stulginskis University, Kauno Raj, Lithuania, Svajus J. ids and Their 1,3,5-triazine Derivatives Asadauskas, Center for Physical Sciences and Seung‐Hyun Yoo, Young‐Wun Kim, Keunwoo Chung, Technology, Vilnius, Lithuania Nam‐Kyun Kim, Korea Research Institute of 464: Potentiality of MoDTC as Friction Modi- Chemical Technology, Daejeon, Republic of Korea, fier for Diesel Engine Oils Joon‐Seop Kim, Chosun University, Gwangju, Yukiya Moriizumi, Akihiro Kotaka, Kenji Yamamoto, Republic of Korea Kazuhiro Umehara, Noriyoshi Tanaka, ADEKA 297: Effect of Nanoparticles on Wear Proper- Corporation, Arakawaku, Japan ties of Lubricating Oils (Case of Ag, Cu and Ni 773: On the Friction Reduction Mechanism In- Nanoparticles) troduced by Graphene Nanosheets as Addi- Masakazu Nakasako, Hiroki Kakihara, Makoto tive in Oil Lubricated Contacts Kamakura, Nobuhiko Tomioka, Bab­Hitachi Vincenzo D'Agostino, Adolfo Senatore, Vincenzo Industrial Co., Kure, Japan Petrone, Paolo Ciambelli, Maria Sarno, Claudia 298: Application of Nanotechnology for High Cirillo, University of Salerno, Fisciano (SA), Italy Performance Solid Lubricant Coatings 391: Application of Time-of-Flight Secondary Marco Enger, Mannheim University of Applied Ion Mass Spectrometry for the Investigation Sciences, Mannheim, Germany, Pavol Blaškovitš, of Boundary Layers Built up by Gear Oil Addi- Slovak University of Technology, Bratislava, Slovakia, tives under Tribological Stress Paul Feinle, Mannheim University of Applied Dieter Lipinsky, Christoph Mayer, Westfälische Sciences, Mannheim, Germany Wilhelms­Universität, Münster, Germany, Florian 368: Friction and Wear Behavior of TiN/a- Wohlleber, Hermann Pflaum, Karsten Stahl, C:H:W Coatings under Dry Sliding and Lubri- Technische Universität München, Garching, Germany, cation Conditions with an Ionic Liquid as a Lu- Heinrich F. Arlinghaus, Westfälische Wilhelms­ bricant Universität, Münster, Germany Dariusz Ozimina, Monika Madej, Kielce University of 687: The Study on Antiseizure Performance Technology, Kielce, Poland, Krystyna Marczewska – for Al-Si Alloys with ZnDTP-free Engine Oil Boczkowska, Lublin University of Technology, Lublin, Yasunori Shimziu, Junya Iwasaki, Hiroshi Fujita, Poland, Michał Styp‐Rekowski, Maciej Matuszewski, Idemitsu Kosan Co. Ltd., Tokyo, Japan University of Technology and Life Sciences in Bydgoszcz, Bydgoszcz, Poland 737: How Commercial Gear Oils Behave in Rolling-Sliding and Pure Sliding Contacts 463: Investigation of the Production of Good Balasubramaniam Vengudusamy, Alexander Grafl, Quality and High Stability Base Oil from AC2T Research GmbH, Wiener Neustadt, Austria, Fischer-Tropsch Paraffin Mixture Franz Novotny‐Farkas, OMV Refining & Marketing György Pölczmann, Jenő Hancsók, University of GmbH, Vienna, Austria, Werner Schöfmann, Magna Pannonia, Veszprém, Hungary Powertrain AG & Co KG, Lannach, Austria 545: Evaluation of Neat Cutting Oils in Tribo- logical Test Rigs and Their Performance Vali- PS1-LA Posters dation in the Field Atrium 8:30 – 16:30 P.V. Joseph, Simmi Datta, M.K. Dubey, R. Mahapatra, Deepak Saxena, E. Sayanna, B. Basu, Indian Oil 32: Optimizing Lubricant Viscosity Profile for Corporation Limited, Faridabad, India Maximum Fuel Economy Daniella Baxter, Sonia Oberoi, Stuart Briggs, Isabella 587: Development of Multifunctional Addi- Goldmints, Infineum USA, Linden, NJ, United States tives (Based on Fatty Acid Methyl Ester and Polyisobutylene Succinic Anhydride) 53: Graphene-like Molybdenum Diselenide Jenő Hancsók, László Bartha, György Pölczmann, Nanoparticles as High-performance Nanolu- University of Pannonia, Veszprém, Hungary, Ádám bricant Additives Beck, MOL Hungarian Oil and Gas Plc., Kostyantyn E. Grinkevych, Leonid M. Kulikov, Százhalombatta, Hungary, Ákos Nemesnyik, MOL Natalia B. Konig, Institute for Problems of Materials LUB Ltd., Almásfüzitő, Hungary Science of NASU, Kyiv, Ukraine, E. I. Gershman, Russian New University, Moscow, Russian Federation, 610: Influence of Geomaterials on Improve- Ivan V. Tkachenko, Institute for Problems of ment of Tribotekhnichesky Properties of Fric- Materials Science of NASU, Kyiv, Ukraine, I. S. tion Pairs Gershman, Railway Research Institute, Moscow, Margarita A. Skotnikova, Nikolay A. Krylov, Evgeny Russian Federation K. Ivanov, Alexander V. Sokolov, Elena V. Homchenko, St. Petersburg Polytechnical university, 92: Response of Naphthenic Oils to Viscosity St. Petersburg, Russian Federation Index Improvers Luis Bastard‐Zambrano, Linda Malm, Nynas AB, 648: Friction Properties of Fluorinated Car- Nynashamn, Sweden bons

14 WTC 2013 Technical Sessions

Philippe Thomas, Jean‐Louis Mansot, Université des Mehdi Fathi‐Najafi, Rene Abrahams, Linda Malm, Antilles et de la Guyane, Pointe à Pitre, Guadeloupe, Nynas AB, Nynäshamn, Sweden France, Karl Delbé, Équipe Interfaces et Matériaux 1071: Research on Friction Properties be- Fonctionnels, Tarbes, France, Audrey Sauldubois, tween Self-lubricating Al2O3/TiC/CaF2 and Philippe Bilas, Laurence Romana, Université des Al2O3/TiC Ceramic Composites Used as Antilles et de la Guyane, Pointe à Pitre, Guadeloupe, Conical Dies France, Laurent Legras, EDF ­ R&D, Moret sur Loing, Xuefeng Yang, Peilong Song, Jie Gu, Tao Ma, Shouren France, Marc Dubois, Katia Guerin, A. Hamwi, Wang, Yanjun Wang, Liying Yang, University of Jinan, Université Blaise Pascal de Clermont­Ferrand, Jinan, China Aubière, France 1316: The Temperature-viscosity Behavior of 667: Rheological and Tribological Characteri- VI Improvers and Their Influence on the Fuel zation of a New Acylated Chitosan-based Bio- Efficiency of Engine Oil degradable Lubricating Grease Formulation: a Jennifer Holtzinger, Frank Lauterwasser, Christoph Comparative Study with Traditional Lithium Wincierz, Phillip A. Hutchinson, Dmitriy and Calcium Greases Shakhvorostov, Evonik Industries AG, Darmstadt, Rubén Sánchez, Concepción Valencia, José M. Germany Franco, Universidad de Huelva, Huelva, Spain 674: A New Test for the Qualitative and LF – STLE/ASME – Lubrication Quantitative Discrimination between Auto- Fundamentals motive Transmission and Axle Oils Waldemar Tuszynski, Marian Szczerek, Edyta TU1-LF2 Boundary and Thin Film Osuch‐Slomka, Institute for Sustainable Technologies Lubrication – National Research Institute, Radom, Poland Room 7 8:30 – 10:30 750: Evaluation of Oil Drain Interval for Buses 1242: NEMD Simulations of Confined Liquids in Urban Traffic with Respect to Local Oper- under Pressure and Shear ating Conditions Chiara Gattinoni, Imperial College London, London, Zoran Timotijevic, Slavko Bacevac, Petroleum United Kingdom, Chris Lorenz, King's College Industry of Serbia, Belgrade, Serbia, Simona Corsi, London, London, United Kingdom, David M. Heyes, Gazpromneft Lubricants Italia S.p.A., Roma, Italy Daniele Dini, Imperial College London, London, 765: Influence of Calcium Detergent on Wet United Kingdom Clutch Durability 1065: De-mystifying the Load-independent Toshiaki Iwai, Toshihiko Ichihashi, Idemitsu Kosan Derjaguin-offset in Various Boundary- Co. Ltd, Ichihara, Japan, Mitsugu Kudo, Idemitsu Lubricated Nanosystems Kosan Co. Ltd, Tokyo, Japan, Masatoshi Miyagawa, Stefan Eder, András Vernes, Georg Vorlaufer, AC2T Nobuyuki Katayama, F.C.C.Co. Ltd., Hamamatsu, Research GmbH, Wiener Neustadt, Austria, Gerhard Japan, Tomoaki Iwai, Kanazawa University, Betz, Vienna University of Technology, Vienna, Kanazawa, Japan Austria 787: Self-anticorrosion Performance of 644: Lubricant Flow-reflow on the Air Bearing Polyurethane Microcapsule Containing Surface in a Hard Disk Drive Triazole Corrosion Inhibitor Alejandro Rodriguez Mendez, David B. Bogy, Eunjoo Koh, Young‐Wun Kim, Keunwoo Chung, University of California Berkeley, Berkeley, CA, United Nam Kyun Kim, Jihoon Shin, Korea Research States Institute of Chemical Technology, Daejeon, Republic of Korea 630: Probing the Molecularly-thin Lubricated Disk Surface Using Thermal Fly-height Con- 796: Influence of Polymer Structure on Fric- trol Sliders to Study Recording Head Wear tional Properties Yung‐Kan Chen, University of California Berkeley, Kazuo Tagawa, Kohei Masuda, JX Nippon Oil & Berkeley, CA, United States, Aravind N. Murthy, Energy Corporation, Yokohama, Japan, Masayoshi Remmelt Pit, HGST a Western Digital Company, San Muraki, Shonan Institute of Technology, Fujisawa, Jose, CA, United States, David B. Bogy, University of Japan California Berkeley, Berkeley, CA, United States 903: Research on the Kinetics of the Lithium 965: A Novel Approach to Evaluate a Solid- Grease Thixotropic Microstructure Recon- liquid Interfacial Slip in Lubricated Contacts of struction DLC Maciej Paszkowski, Sylwia Olsztyńska‐Janus, Marko Polajnar, Mitjan Kalin, University of Wrocław University of Technology, Wrocław, Poland Ljubljana, Ljubljana, Slovenia 1019: Black is Black …. A Heavy Viscous Oil 1214: In Situ Raman Micro Spectrometry In- for Lubricating Greases vestigation of Boundary Dynamic Tribologic Contacts

15 Technical Sessions WTC 2013

Audrey Molza, A. Sauldubois, P. Bilas, Yves Bercion, 154: The Mechanisms of Load Generation be- J.L. Mansot, Université des Antilles et de la Guyane, tween Parallel Surfaces Pointe à Pitre, France Noel Brunetiere, Bernard Tournerie, University of Poitiers, Futuroscope Chasseneuil, France TU2-LF3 Starved and cavitated 717: Experimental Study on the Effects of Oil lubrication Groove Location on Temperature and Pres- Room 7 11:00 – 13:00 sure Profile in Journal Bearing Lubrication 733: A Model Considering non-fully Filled Mohamad A. Ahmad, Salmiah Kasolang, Universiti Gaps for Systems under Starved Lubrication Teknologi MARA, Shah Alam, Malaysia, Rob Dwyer‐ Michael Müller, Georg‐Peter Ostermeyer, Florian Joyce, University of Sheffield, Sheffield, United Bubser, Braunschweig University of Technology, Kingdom Braunschweig, Germany 716: Experimental Study on the Effects of Oil 768: Occurrence of Starvation: Stationary and Groove Location on Film Thickness and Vis- Transient Approaches cosity Profile in Hydrodynamic Journal Bear- Florian Brémond, Denis Mazuyer, Juliette Cayer‐ ings Barrioz, École Centrale de Lyon, Écully, France Mohamad A. Ahmad, Salmiah Kasolang, Universiti Teknologi MARA, Shah Alam, Malaysia, Rob Dwyer‐ 972: An Analysis of Starved EHL Point Con- Joyce, University of Sheffield, Sheffield, United tacts with Reflow Kingdom Takashi Nogi, Japan Aerospace Exploration Agency, Chofu, Japan 593: Piston Ring Pounding Analysis and Possi- ble Solution 129: CFD Modelling of Cavitation Phenome- Quanbao Zhou, Changan UK R&D Centre Ltd, non in Piston Ring/Cylinder Liner Conjunction Nottingham, United Kingdom Hamed Shahmohamadi, Ramin Rahmani, Homer Rahnejat, Colin Garner, Loughborough University, TU4-LF5 EHL Modelling II Loughborough, United Kingdom Room 7 16:30 – 18:50 831: Preliminary Investigation of the Impact Pressure from a Single Cavitation Water Bub- 397: Prediction of Traction in EHL Contacts ble on a Solid Boundary Wall, Using Experi- Ding Wang, Gerhard Poll, Leibniz University of mental, Analytical and Numerical Methods Hannover, Hannover, Germany Iakovos Tzanakis, Bournemouth University, 396: Theoretical and Experimental Investiga- Bournemouth, United Kingdom, Anastasios tions on EHL Point Contacts with Different Georgoulas, Dimitrios Fytanidis, Democritus Entrainment Velocity Directions University of Thrace, Xanthi, Greece, Mark Hadfield, Karsten Stahl, Klaus Michaelis, Josef Mayer, Bournemouth University, Bournemouth, United Alexander Weigl, Thomas Lohner, Technische Kingdom, Nikolaos Kotsovinos, Democritus Universitaet Muenchen, Garching, Germany, Milan University of Thrace, Xanthi, Greece Omasta, Martin Hartl, Ivan Krupka, Brno University 1212: Surface Roughness Effects in Starved of Technology, Brno, Czech Republic EHL Contacts 407: Prediction of Stribeck and Traction David Kostal, Petr Sperka, Ivan Krupka, Martin Curves for Lubricated Elliptical Contacts In- Hartl, Brno University of Technology, Brno, Czech cluding Frictional Heating Republic Radu I. Popovici, Dirk J. Schipper, University of Twente, Enschede, Netherlands TU3-LF4 Hydrodynamic and Journal 408: Stribeck and Traction Curves for Ellipti- bearings cal Contacts - Model Validation Room 7 14:00 – 16:00 Radu I. Popovici, Dirk J. Schipper, University of Twente, Enschede, Netherlands 1222: Framework for the Fluid-Structure In- teraction Numerical Simulation with Applica- 924: Thermal Conductivity of Lubricating Oil tion to the Generalized Reynolds and Stokes under Elliptical Contact and its Effect on Equations: Compliant-Wall Journal Bearing Shear Stress Distribution of EHL Oil Films (Large Wall Deformations) Toshifumi Mawatari, Bo Zhang, Akira Nakajima, Troy A. Snyder, Minel J. Braun, University of Akron, Nobuyoshi Ohno, Saga University, Saga, Japan, Akron, OH, United States Motohiro Kaneta, Brno University of Technology, 621: Boundary Effect on Hydrodynamic Lubri- Brno, Czech Republic cated Contact 945: The Roller’s Maximum Misaligned Angle L. Guo, P.L. Wong, City University of Hong Kong, in Different EHL Working Conditions Hong Kong, China, F. Guo, Qingdao Technological Zhijian Wang, Xiaoyang Chen, Xuejin Shen, Shanghai University, Qingdao, China University, Shanghai, China

16 WTC 2013 Technical Sessions

1286: CFD Modeling and Infrared Measure- Washizu, Toshihide Ohmori, Toyota Central R&D ment of an EHL Line Contact Labs Inc., Nagakute, Japan, Shinichi Shikata, Markus Hartinger, Tom Reddyhoff, Imperial College National Institute of Advanced Industrial Science and London, London, United Kingdom Technology, Tsukuba, Japan 80: Speed Dependence of Atomic Friction: Ex- PS1-LF Posters perimental Measurements and Accelerated Atrium 8:30 – 16:30 Atomistic Simulations 67: Multiobjective Optimum Design of Porous Ashlie Martini, Zhijiang Ye, University of California Air Bearing Using Particle Swarm Optimiza- Merced, Merced, CA, United States, Yalin Dong, tion Method Purdue University, West Lafayette, IN, United States, Nenzi Wang, Chi‐Rou Hsu, Chang Gung University, Xin Liu, Philip Egberts, Robert Carpick, University of Tao­Yuan, Taiwan, Hua‐Chih Huang, Industrial Pennsylvania, Philadelphia, PA, United States Technology Research Institute, Tai­Chung, Taiwan 342: Atomic Scale Exfoliation of Graphene 472: Rheology and Tribology on a Rheometer: Kouji Miura, Makoto Ishikawa, Masaya Ichikawa, Characterization of Lubricants Aichi University of Education, Kariya, Japan, Naruo Frederik Wolf, Anton Paar Germany GmbH, Sasaki, Seikei University, Musashino, Japan Ostfildern, Germany 1218: Adhesion Forces in a Sliding Nano- 806: Impact of Balancing Wedge Action in contact for Rigid and Viscoelastic Materials Textured Hydrodynamic Bearings Olivier Noel, University of Maine, Le Mans, France, Kazuyuki Yagi, Joichi Sugimura, Kyushu University, Pierre‐Emmanuel Mazeran, Université de Fukuoka, Japan Technologie de Compiègne, Compiègne, France, 930: Study on the Transient Elastohydrody- Hussein Nasrallah, Laure Fabié, University of Maine, namic Film Formation by the Artificial Surface Le Mans, France Pattern Structure 611: Effect of Adhesion and Roughness on the Siyoul Jang, Kookmin University, Seoul, Republic of Tribological Contact of micron-sized Glass Korea, Martin Hartl, Ivan Krupka, Brno University of Spheres Technology, Brno, Czech Republic Thorsten Staedler, Regina Fuchs, Jan Meyer, Xin 962: Role of Interactions on Solid-liquid Inter- Jiang, University of Siegen, Siegen, Germany face for Friction Performance of Oil Lubri- TU2-VI3 Nanotribology Modelling and cated Contacts Theoretical Studies Mitjan Kalin, Marko Polajnar, University of Ljubljana, Ljubljana, Slovenia Room 8 11:00 – 13:00 980: A Novel Method to Determine EHL Film 285: First-principles Study on the Atomic- Thickness with Optical Interference scale Tunable Friction in Graphene-based Ma- Qianqian Yang, Yingjun Chen, Tianmao Lai, Ping terials Huang, South China University of Technology, Lin‐Feng Wang, Tian‐Bao Ma, Tsinghua University, Guangzhou, China Beijing, China 306: Low Friction Mechanism of Polyelectro- VI – VIENNANO’13-Nanotechnology lyte Brushes Analyzed by Coarse-Grained Mo- lecular Simulations TU1-VI2 Nanostructure and Friction Hitoshi Washizu, Tomoyuki Kinjo, Hiroaki Yoshida, Contact - Part B Toyota Central R&D Labs., Nagakute, Japan Room 8 8:30 – 10:30 113: Viscosity of Highly Confined PFPE-Z 89: Nano-scale Dissipation of Layered Materi- Nanofilms with Molecular Dynamics als Cristian Pirghie, “Stefan cel Mare” University of Ernst Meyer, Marcin Kisiel, Gregor Fessler, Thilo Suceava, Suceava, Romania, Stfan Eder, Georg Glatzel, Markus Langer, Urs Gysin, Remy Pawlak, Vorlaufer, András Vernes, Friedrich Franek, Shigeki Kawai, Sweetlana Fremy, University of Basel, Austrian Center for Competence of Tribology, Wiener Basel, Switzerland, R. Buzio, A. Gerbi, CNR­SPIN Neustadt, Austria Institute for Superconductors, Innovative Materials 578: Giving Molecules the Squeeze: Molecular and Device, Genova, Italy, T.D. Keene, S.X. Liu, S. Dynamics Study of the Contact Mechanics Lu- Descurtins, University of Berne, Berne, Switzerland bricated Asperity Contacts 289: Friction Change by Isotopic Lattice- Bradley W. Ewers, James D. Batteas, Texas A&M Vibration Shifting of Solid University, College Station, TX, United States Seiji Kajita, Toyota Central R&D Labs Inc., Nagakute, 786: Friction Anisotropy and Asymmetry in Japan, Hideyuki Watanabe, National Institute of Molecularly Thin Films Advanced Industrial Science and Technology, Ahmad Jabbarzadeh, University of Sydney, Sydney, Tsukuba, Japan, Mamoru Tohyama, Hitoshi Australia

17 Technical Sessions WTC 2013

1324: Friction Phase Diagram of Frenkel- 690: Study of Frictional Properties of Epitaxial Kontorova Atomistic Model Graphene on SiC in UHV Motohisa Hirano, Shin Ito, Gifu University, Gifu, Diego Marchetto, Martin Dienwiebel, FhG­KIT Japan MikrotribologieCentrum µTC, Karlsruhe, Germany 929: Reducing Frictions of Carbon Nanotube TU3-VI4 Nano-Particles as Lubricant Film by Normal Modulation -Under mi- Additive cronewton and millinewton Loads- Room 8 14:00 – 16:00 Hiroshi Kinoshita, Masatoshi Kageyama, Yuma 328: Nanomaterials in Lubricants: Myths and Yokoi, Aidil A. Alias, Masahiro Fujii, Okayama Facts University, Okayama, Japan Boris Zhmud, Applied Nano Surfaces Sweden AB, 1130: Self-patterning Functionality of Nanos- Uppsala, Sweden, Bogdan Pasalskiy, Kyiv National tripe Surface During Sliding University of Trade and Economics, Kyiv, Ukraine Yasuhisa Ando, Shigenori Fujisawa, Megumi Fukuta, 1039: Investigation on Tribological Properties Tokyo University of Agriculture and Technology, of Nanolubricants with Carbon Nano-horns as Koganei, Japan, Miki Nakano, Koji Miyake, National Additives at Different Temperatures Institute of Advanced Science and Technology (AIST), Valentina Zin, Filippo Agresti, Simona Barison, Tsukuba, Japan Laura Colla, Cesare Pagura, Monica Fabrizio, 221: Contributions of Mobile and Bonded National Research Council of Italy, Padova, Italy Molecules to Dynamic Friction of Nanometer- 112: Use of Carbon Nano Fiber (CNF) as a Po- Thick Perfluoropolyether Films Coated on tential Additive for Enhanced Tribological Magnetic Disk Surfaces Properties Renguo Lu, Hedong Zhang, Nagoya University, Paul Mathew, Mohandas Nayak, John F. Welch Nagoya, Japan, Yasunaga Mitsuya, Nagoya Industrial Technology Centre, Bangalore, India, Mallikarjun Science Research Institute, Nagoya, Japan, Kenji Karadge, GE Global Research Centre, Niskayuna, NY, Fukuzawa, Shintaro Itoh, Nagoya University, United States, K. Anand, John F. Welch Technology Nagoya, Japan Centre, Bangalore, India 473: TEM Evaluation of Carbon Nitride Coat- 46: Preparation, Characterization and Tribo- ing by S/TEM EELS (Electronic State for Ultra logical Property of Surface-Modified Calcium Low Friction Carbon Nitride) Borate Nanoparticles Used as Lubricating Ad- Hiroshi Inoue, Shunsuke Muto, Takayuki ditives Tokoroyama, Noritsugu Umehara, Nagoya Jiusheng Li, Chinese Academy of Sciences, Shanghai, University, Nagoya, Japan China, Xiaohong Xu, PetroChina Lanzhou Lubricating 240: Study of Nano-burnishing Process on the Oil R&D Institute, Lanzhou, China Base of Atomic and Macro-scale Modeling 294: Investigation of Fullerence C60 Influence Andrey I. Dmitriev, Institute of Strength Physics and on Tribotechnical and Dynamical Mechanical Materials Science, Tomsk, Russian Federation, Viktor Properties of Composite Materials Based on P. Kuznetsov, Kurgan State University, Kurgan, Phenilon Russian Federation, Igor Yu. Smolin, Anton Yu. Alexander I. Burya, Ukrainian Technological Nikonov, Serguei Psakhie, Institute of Strength Academy, Dnepropetrovsk, Ukraine, О.Yu. Physics and Materials Science, Tomsk, Russian Kuznetsova, A.D. Derkach, Dnepropetrovsk State Federation Agrarian University, Dnepropetrovsk, Ukraine, V.P. Sergiyenko, S.N. Bukharov, National Academy of BE – Bearings Science of Belarus, Gomel, Belarus TU1-BE2 Rolling Bearings 1 1069: Improvement of Tribological Properties Room 9 8:30 – 10:30 of a Lubricant Engine Oil by Addition of Cu, TiO2 Nanoparticles and Carbon Nano-horns 592: Fatigue Life Extension of Rolling Element Valentina Zin, Filippo Agresti, Simona Barison, Bearings by Residual Stresses Induced Laura Colla, E. Mercadelli, Monica Fabrizio, National Through Surface Machining Research Council, Padova, Italy Timo Neubauer, Gerhard Poll, Berend Denkena, Oliver Maiß, Leibniz Universität Hannover, TU4-VI5 Nanocontacts and Coatings Hannover, Germany Room 8 16:30 – 18:50 625: CFD Analysis of Drag Loss in High Speed 1320 – Keynote: Toughening Behavior of Solid Bearings Lubricating Films Jun Wang, SKF Engineering & Research Centre, Qunji Xue, Liping Wang, Chinese Academy of Science, Nieuwegein, Netherlands Lanzhou, China 548: Inner Secrets of the Tapered Roller Bear- ing

18 WTC 2013 Technical Sessions

Henrik Strand, Volvo Construction Equipment AB, TU3-BE4 Rolling Bearings 2 Eskilstuna, Sweden Room 9 14:00 – 16:00 1151: A Fully-coupled Finite Volume Solver 1270: Smearing Damage in Rolling Element for Elasto-hydrodynamic Lubrication Prob- Bearings lems with Particular Application to Rolling Mark T. Fowell, Amir Kadiric, Imperial College Element Bearings London, London, United Kingdom, Guillermo Morales Alireza Hajishafiee, Daniele Dini, Amir Kadiric, ‐Espejel, Lars‐Erik Stacke, SKF Engineering and Stathis Ioannides, Imperial College London, London, Research Centre, Nieuwegein, Netherlands, United Kingdom Efstathios Ioannides, Imperial College London, 265: Influence of Grease Bleed Oil on Ball-on- London, United Kingdom disc Lubrication 1183: An Elastic-Plastic Approach on Mis- Tiago Cousseau, Universidade do Porto, Porto, alignment Effects in Cylindrical Roller Bear- Portugal, Markus Björling, Luleå University of ings Technology, Luleå, Sweden, Beatriz Graça, Spiridon Crețu, Marcelin Benchea, Technical Universidade do Porto, Porto, Portugal, Armando University of Iaşi, Iaşi, Romania Campos, Instituto Superior de Engenharia do Porto, Porto, Portugal, Jorge Seabra, Universidade do Porto, 643: An Experimental Investigation of Rolling Porto, Portugal, Roland Larsson, Luleå University of Contact Failure within Silicon Nitride Subject Technology, Luleå, Sweden to Micro Surface Defects Abdul W. Awan, Mark Hadfield, Ben Thomas, TU2-BE3 Fluid-Film Bearings 2 Bournemouth University, Poole, United Kingdom, Charlotte Vieillard, Robin Cundill, SKF Engineering Room 9 11:00 – 13:00 & Research Centre, Nieuwegein, Netherlands 76: Calculation of Heavy-loaded Tribo-unit 1280: Serial Sectioning, FIB and TEM Investi- Dynamics Considering the Thermal State of gations of Butterfly and White Etching Crack Structural Elements and the Rheological (WEC) Formation Properties of the Lubricant Martin H. Evans, Ling Wang, Robert J.K. Wood, Elena Zadorozhnaya, South Ural State University, University of Southampton, Southampton, United Chelyabinsk, Russian Federation Kingdom 256: Tribometric Development Tools for 1118: Rolling Contact Fatigue Test with Journal Bearings – a Novel Test Adapter Greases in Hydrogen Environment Florian Grün, Herbert Krampl, Jürgen Schiffer, Jakob Hiroyoshi Tanaka, Suguru Ikeda, Masaaki Moder, István Gódor, Montanuniversität Leoben, Hashimoto, Joichi Sugimura, Kyushu University, Leoben, Austria, Martin Offenbecher, Miba Bearing Fukuoka, Japan Group, Laakirchen, Austria 1037: Extremely Non-Uniformed Contact Be- 352: Wear Calculation of Conrod Bearings haviors of Ball and Raceway of Pitch Bearing Dirk Bartel, Lars Bobach, Ludger Deters, Otto­von­ of Wind Turbine Guericke Universität, Magdeburg, Germany S.N. Xu, National Research Centre of Bearing 437: Improving the Performances of Hydrody- Technology, Dalian, China, H.Y. Guo, Xi’an Jiaotong namic Journal Bearings by Anisotropic Slip University, Xi’an, China, W. Xu, Y.N. Zhang, National Boundary Chien‐Yu Chen, Hsiang‐Chin Jao, Ming‐Da Chen, Research Centre of Bearing Technology, Dalian, Wang‐Long Li, National Cheng Kung University, China, X. Zhang, Xi’an Jiaotong University, Xi’an, Tainan, Taiwan China, F.C. Wang, National Research Centre of Bearing Technology, Dalian, China 280: Study on Tribological Properties of Ni- trile Butadiene Rubber with Accelerated Ag- TU4-BE5 Rolling Bearings 3 ing under Dry Friction Condition Conglin Dong, Chengqing Yuan, Qing Wu, Wuhan Room 9 16:30 – 18:50 University of Technology, Wuhan, China 41: Pushing the Boundaries for New Chal- 440: Experimental Investigation of the Tem- lenges of Rolling Bearings perature in Micro Gap High Speed Water- Oliver Koch, Florian Böhm, Ernst Masur, Tobias Lubricated Hybrid Journal Bearing Mederer, Schaeffler Technologies AG & Co. KG, Pengju Li, Yongsheng Zhu, Youyun Zhang, Pengfei Herzogenaurach, Germany Yue, Yuping Yan, Xi’an Jiaotong University, Xi’an, 636: Computing Structural Fatigue Damage in China Rolling Bearing Cages Pietro Tesini, SKF Engineering & Research Centre, Göteborg, Sweden, Thierry Adane, Development Centre Ball Bearings SKF, Saint­Cyr sur Loire, France

19 Technical Sessions WTC 2013

641: Advances in Transient Rolling Bearing sis of the Influence of the Main Parameters on Simulation - SKF BEAST the Frictional Map Dag Fritzson, Lars‐Erik Stacke, SKF Engineering & Vincenzo D'Agostino, Adolfo Senatore, Mario Research Centre, Göteborg, Sweden Pisaturo, University of Salerno, Fisciano (SA), Italy 626: Fluid Flow Simulation of Water Lubri- 640: Rolling Contact Fatigue Tests on Wheel cated Ball Bearings at High Rotating Speed and Rail Steels Jun Hyeon Jo, Choong Hyun Kim, Korea Institute of Daniel F.C. Peixoto, Diogo M. Ramos, Paulo M.S.T. de Science and Technology, Seoul, Republic of Korea Castro, Luis A.A. Ferreira, University of Porto, Porto, 729: Detailed Contacts in Dynamic Simula- Portugal tions – a Contradiction? Lars‐Erik Stacke, Dag Fritzson, SKF Engineering & TU2-EC3 Transmissions 2 Research Centre, Göteborg, Sweden, Guillermo Room 10 11:00 – 13:00 Morales‐Espejel, SKF Engineering & Research Centre, 330: Experimental and Analytical Wear Inves- Nieuwegein, Netherlands tigations of Bush- and Roller Chain Drives 1315: Simulation Analysis of the Factors Influ- Daniel Sappok, Alexander Gummer, Bernd Sauer, encing the Lubrication Conditions in a Rolling University of Kaiserslautern, Kaiserslautern, Element Bearing Set for a Gas Turbine Starter Germany Motor 38: Wear Resistance of New Blade for Plane- Fabrizio Mandrile, Guido Moschetto, SKF Industrie tary Concrete Mixer S.p.A., Airasca (TO), Italy, Silvio Vasconi, SKF USA Maria Cristina Valigi, Lorenzo Fabi, University of Inc., Landsale, PA, United States, Francesco Caprioli, Perugia, Perugia, Italy, Ilaria Gasperini, SI.CO.MA. SKF Industrie S.p.A., Airasca (TO), Italy s.r.l., Società Italiana Costruzione Macchine, Perugia, 569: The Analysis of Friction Torque Charac- Italy teristics for Four-point-contact Slewing Bear- 339: Progress of PVD Coated Spur Gear Tooth ings Failure Ming Qiu, Long Chen, Yingchun Li, Chenhui Jia, Boris Kržan, Jože Vižintin, University of Ljubljana, Henan University of Science and Technology, Ljubljana, Slovenia Luoyang, China 106: Interactions between Tribology and Dy- EC – ECOTRIB 2013 – Tribology of namics of Automotive Differential Hypoid Gears Considering Thermal Non-Newtonian Machine Elements Mixed Lubrication Effects Mahdi Mohammadpour, Stephanos Theodossiades, TU1-EC2 Transmissions 1 Homer Rahnejat, Loughborough University, Room 10 8:30 – 10:30 Loughborough, United Kingdom 40: Analysis of Lubrication Supply of Gears 292: Analysis of a High Power Density Gear Lubricated with Greases NLGI 1/2 and the Ef- Transmission Dynamic Behavior in Transient fects on Load Carrying Capacity and Efficiency State Johann‐Paul Stemplinger, Karsten Stahl, Bernd‐ Haisheng Feng, Liqin Wang, Dezhi Zheng, Le Gu, Robert Hoehn, Thomas Tobie, Klaus Michaelis, Harbin Institute of Technology, Harbin, China Technische Universitaet Muenchen, Munich, Germany 411: A Method for Calculating the Thermal 236: The Effect of PVD Coatings on Scuffing Capacity of Planetary Gears and Pitting Resistance of Gears Attila Csobán, Mihály Kozma, Budapest University of Remigiusz Michalczewski, Marian Szczerek, Technology and Economics, Budapest, Hungary Waldemar Tuszyński, National Research Institute, Radom, Poland, Maksim Antonov, Tallinn University TU3-EC4 Transmissions 3 of Technology, Tallinn, Estonia Room 10 14:00 – 16:00 318: Energy-Efficiency Improvement of Tim- 788: Improvement of Lubrication Life of ing Chain Drives Strain Wave Gearing for Space Applications Frederik Krupp, Csaba Fabian, Bernd Sauer, by Surface Carburizing Technical University of Kaiserslautern, Kazuaki Maniwa, Shingo Obara, Japan Aerospace Kaiserslautern, Germany Exploration Agency, Tsukuba, Japan, Jun’ichi Kurogi, 376: On the Significance of Operating Tem- Satoru Kanai, Keiji Ueura, Harmonic Drive Systems perature to the Durability of a Wet Clutch Inc., Azumino, Japan Niklas Lingesten, Pär Marklund, Erik Höglund, Luleå 1059: Influence of Dry Friction on the Irre- University of Technology, Luleå, Sweden versibility of Cycloidal Speed Reducer 774: Improving the Engagement Performance Andrea Tonoli, Nicola Amati, Fabrizio Impinna, of Automated Dry Clutch through the Analy- Joaquim Girardello Detoni, Sanjarbek Ruzimov,

20 WTC 2013 Technical Sessions

Enrico Gasparin, Kamaliddin Abdivakhidov, PS1-EC Posters Politecnico di Torino, Torino, Italy Atrium 8:30 – 16:30 1169: Diagnostics and Prognostics Algorithms 11: Prediction on Friction Characteristics of for an Aircraft Accessory Gearbox Industrial Brakes Using Artificial Neural Net- Aida Rezaei, Queen's University, Kingston, Canada, works Azzedine Dadouche, National Research Council Wojciech Grzegorzek, Stanislaw F. Scieszka, Silesian Canada, Ottawa, Canada University of Technology, Gliwice, Poland 1246: Modelling Lubrication in Gear Pairs 85: Knowledge Integration for Design of Marco Barbieri, Francesco Pellicano, Università di Tribo-systems Modena e Reggio Emilia, Modena, Italy Zhinan Zhang, Shanghai Jiao Tong University, 1289: Load Independent Power Losses of Or- Shanghai, China, Bin Wu, China FAW Group dinary Gears: Numerical and Experimental Corporation R&D Center, Changchun, China, Tonghai Analysis Wu, Xi’an Jiaotong University, Xi’an, China, Xianghui Franco Concli, Carlo Gorla, Politecnico di Milano, Meng, Youbai Xie, Shanghai Jiao Tong University, Milano, Italy, Karsten Stahl, Bernd‐Robert Höhn, Shanghai, China Klaus Michaelis, Hansjörg Schultheiß, Johann‐Paul Stemplinger, FZG Gear Research Center, Garching bei 98: A Study of a Belt-type One-way Clutch München, Germany Keiji Imado, Hironori Nakata, Atsuhiro Shou, Kiyoshi Terada, Oita University, Oita, Japan TU4-EC5 Automotive Tribology 2 104: Experimental and Numerical Investiga- Room 10 16:30 – 18:50 tion of Thermo-mechanical Instability of the Industrial Disc Brakes 820: An investigation about an Automotive DI Stanisław F. Scieszka, Marcel Zolnierz, Silesian Solenoid Injector Dynamic Flow Shift in Dura- University of Technology, Gliwice, Poland bility Roberto Bassani, University of Pisa, Pisa, Italy, 561: Online Wear Monitoring and Working Salvatore Varchetta, Continental Automotive Italy Conditions Recognition of the Piston Rings S.p.A., San Piero a Grado (PI), Italy, Massimo De and Cylinder Liners Using On-Line Visual Fer- Sanctis, University of Pisa, Pisa, Italy rography Wei Cao, Jiaoyi Wu, Wei Chen, Guangneng Dong, 217: Influence of Lubricant Degradation on Youbai Xie, Xi’an Jiaotong University, Xi’an, China Measured Piston Ring Film Thickness in a Fired Gasoline Reciprocating Engine 573: FEM Model of the Moving Seal Based on Rai S Notay, Martin Priest, Malcolm F. Fox, Richard the 3D Analysis of Surface Topography C. Coy, University of Leeds, Leeds, United Kingdom Valery Poroshin, Dmitry Bogomolov, Anna Anosova, 246: Numerical and Experimental Investiga- Moscow State Industrial University, Moscow, Russian tions of the “Piston-Cylinder” Tribosystem of Federation Diesel Engine 581: Mesoscopic LBM Model of Flow in Thin Yury Rojdestvensky, Konstantin Gavrilov, Aleksey 2D Channels of Seals Concerning the Wall Doykin, Igor Levanov, South Ural State University, Roughness Effect Chelyabinsk, Russian Federation Dmitry Bogomolov, Valery Poroshin, Victor 360: Measuring Friction in Automotive En- Radygin, Moscow State Industrial University, gines & Determining the Contributions of the Moscow, Russian Federation Individual Subsystems 664: Failure Analysis of the Ventilation Mills in Hannes Allmaier, David E. Sander, Franz M. Reich, Power Plant and Proposals for their Revitali- Virtual Vehicle Competence Center, Graz, Austria zation 537: Wear Condition Monitoring for Automo- Marko Ristic, Jasmina Perisic, Institute Gosa, tive Engines via OLVF Belgrade, Serbia, Ljiljana Radovanovic, Zivoslav Jiaoyi Wu, Wei Cao, Yali Zhang, Xinyan Mi, Junhong Adamovic, University in Novi Sad, Zrenjanin, Serbia Mao, Youbai Xie, Xi’an Jiaotong University, Xi’an, 837: Wear Monitoring of the Vehicle Brake China Pad by Using Ultrasonic Sensors Jong‐Hyoung Kim, Korea Institute of Industrial 624: A Non-invasive Approach for Piston Ring Technology, Daegu, Republic of Korea, Yong‐Sub Film Thickness Measurement Jung, Dawit Z. Segu, Seock‐Sam Kim, Kyungpook Emin Y. Avan, Robin S. Mills, Rob S. Dwyer‐Joyce, National University, Daegu, Republic of Korea University of Sheffield, Sheffield, United Kingdom 1088: Lubrication Regime Analysis on Sliding 58: Tribological Behavior of a Line Contact Bearing Example between Rubber and Wax (Application to the Aleksandar Marinkovic, Milos Stankovic, Ljubica Wax-removal of Oil Pipeline Pigging) Milovic, University of Belgrade, Belgrade, Serbia Guibin Tan, Shuhai Liu, Deguo Wang, Si‐wei Zhang, China University of Petroleum­Beijing, Beijing, China

21 Technical Sessions WTC 2013 1092: On Friction-drive Model of Metal Belt Wednesday, September 11TH Continuously Variable Transmission Yuanqiang Tan, Xiaoru Zhang, Jingang Liu, Shiping Yang, Yi Cheng, University of Xiangtan, Xiangtan, ET - Ecotribology China WE4-ET5 Tribology for Life - Green MT – Tribology of Materials Tribology TU4-MT1 Metals 1 Room 2 16:10 – 17:30 Room 1 16:30 – 18:50 Panel Moderator: Oliver Futterknecht, Technische Universität Wien, Austria 8: The Transition from EHL to BL Region un- der Friction of Copper with Different Virgin 695: Potential of Banana Leaves as Effective Grain Size Lubricants for High Temperature Applications Alexey Moshkovich, Aleks Laikhtman, Vladislav – A Preliminary Approach Perfilyev, Igor Lapsker, Lev Rapoport, Holon Mariyam J. Ghazali, Jaharah A. Ghani, Syed M.A.H.T. Institute of Technology, Holon, Israel Mazlam, Universiti Kebangsaan Malaysia, Bangi, Malaysia 21: Tribotesting System for Hardmetals Me- chanical Characterization 958: Development and Evaluation of Water Stanislaw F. Scieszka, Wojciech Grzegorzek, Marcel Soluble Green Cutting Fluid Zolnierz, Silesian University of Technology, Gliwice, Chatra Sathwik, Indian Institute of Science, Poland Bangalore, India, Pamarthy Varsha, SASTRA University, Thanjvur, India, Satish V. Kailas, Indian 139: A Study on Sliding Wear Behavior of Ti- Institute of Science, Bangalore, India 6Al-4V against SS316L under Ambient and Vacuum Conditions at Constant Pressure 738 – Keynote: Impulse Talk: Ecotribology – Raj J. Ashok, Anindya Deb, Satish V. Kailas, Indian Development, Prospects and Challenges Institute of Science, Bangalore, India, Bangalore, Ille C. Gebeshuber, Universiti Kebangsaan Malaysia, India Bangi, Malaysia, Jianbin Luo, Tsinghua University, Beijing, China, Braham Prakash, Luleå University of 142: Subsurface Recrystallization Structure Technology, Luleå, Sweden, Zygmunt Rymuza, Controlling Wear Resistance of Metals Warsaw University of Technology, Warsaw, Poland Bin Yao, Zhong Han, Ke Lu, Chinese Academy of Sciences, Shenyang, China Panel discussion on Ecotribology 226: Tribological Study of as Cast and Ex- BT - Biotribology truded A356-SiC Metal Matrix Composites Somanahally L. Ajit Prasad, Kinnarahalli C. WE1-BT6 Lubrication in Natural Joints Mohanakumara, PES College of Engineering, Mandya, India, Madegowda Abhijith, S.C.T. Institute Room 2 8:30 – 10:30 of Technology, Bangalore, India 304 – Keynote: Role of Human Mucinous Gly- 321: Wear Properties of Sub-microcrystalline coprotein Lubricin in the Boundary Lubrica- Pure Iron Produced by Severe Plastic Defor- tion of Articular Joints mation Bruno Zappone, Università della Calabria, Rende, Hirotaka Kato, Fukui National College of Technology, Italy, Jacob Israelachvili, University of California ­ Sabae, Japan, Yoshikazu Todaka, Toyohashi Santa Barbara, Santa Barbara, CA, United States University of Technology, Toyohashi, Japan 1000: Towards Understanding Frictional 133: Metal-Working Friction Influence on Properties of Articular Joints in Beetle Legs: Metal Properties µCT-based 3D Model and Multi-Body Simula- Evgeny A. Deulin, Bauman Moscow State Technical tion of Joint Kinematics University, Moscow, Russian Federation, Ekaterina Steffen Vagts, Henning Haschke, Josef Schlattmann, Ikonnikova, Azov Steel Co, Mariupov, Ukraine Hamburg University of Technology, Hamburg, Germany, Thomas Kleinteich, Philipp Busshardt, Tom Pullwitt, Stanislav N. Gorb, Kiel University, Kiel, Germany 343: Observation of the Transition between Soft-EHL and Biphasic Lubrication Mode Us- ing MEMS Pressure Sensor Nobuo Sakai, Hirotaka Awata, Kyushu Institute of Technology, Kitakyushu, Japan, Tetsuo Yamaguchi, Yoshinori Sawae, Teruo Murakami, Kyushu University, Fukuoka, Japan

22 WTC 2013 Technical Sessions

867: Finite Element Method Simulation in Favier, Christian Gauthier, Université de, Strasbourg, Early Hip Arthritis France Danai I. Karampela, Ken Mao, University of Warwick, Coventry, United Kingdom WE3-BT8 Biotribology General 925: A Strain-Dependent, Linear Viscoelastic Room 2 14:00 – 15:40 Model of Articular Cartilage 798: Nanotribology of Keratin Fibers in Patrick Smyth, Itzhak Green, Georgia Institute of Crossed Geometries Technology, Atlanta, GA, United States, Robert Hiroyasu Mizuno, L'Oréal Recherche, Kawasaki, Jackson, Russell R. Hanson, Auburn University, Japan, Mark Rutland, Royal Institute of Technology, Auburn, AL, United States Stockholm, Sweden, Gustavo S. Luengo, L'Oréal 1109: What Keeps Lubricin (PRG4) at the Slid- Recherche, Aulnay­Sous­Bois, France ing Cartilage-cartilage Interface under 1035: The Effect of Plasma Electrolytic Oxida- Boundary Lubrication? tion on Titanium in the Microstructure, Tri- Sara Ehsani Majd, Roel Kuijer, University of bocorrosion Behavior and Cytotoxicity Groningen, Groningen, Netherlands, Alexander Virginia Sáenz de Viteri, Raquel Bayón, Amaya Köwitsch, Thomas Groth, Martin Luther University Igartua, IK­4 Tekniker, Eibar, Spain, Miren G. Halle–Wittenberg, Halle, Germany, Tannin Schmidt, Barandika, University of Basque Country (UPV/EHU), University of Calgary, Calgary, Canada, Prashant K. Vitoria, Spain Sharma, University of Groningen, Groningen, 681: Micro/nanotribological Properties of Netherlands Natural and Synthetic Fibers WE2-BT7 Tribology of the Mouth Srinath R. Kistampally, Sriram Sundararajan, Iowa State University, Ames, IA, United States Room 2 11:00 – 13:00 153: Sealing Properties of Mechanical Seal for 827: Dinosaur Dentition: Tribology 65 Million Ventricular Assist Device Years Ago (Ma) Koki Kanda, Hirotsuna Sato, Tohoku University, Brandon A. Krick, University of Florida, Gainesville, Sendai, Japan, Keiichiro Kaneshima, Takayuki FL, United States, Gregory M. Erickson, Florida State Miyakoshi, Tomoya Kitano, Hideki Kanebako, Sun University, Tallahassee, FL, United States, W. Gregory Medical Technology Research Corporation, Nagano, Sawyer, University of Florida, Gainesville, FL, United Japan, Koshi Adachi, Tohoku University, Sendai, States Japan 305: Effect of Organic Phase on the Microtri- 998: Friction Properties of Mechanical Seal for bological Behaviour of Human Tooth Enamel Ventricular Assist Device Jing Zheng, Longqing Weng, Ming Wen, Linmao Hirotsuna Sato, Tohoku University, Sendai, Japan, Qian, Zhongrong Zhou, Southwest Jiaotong Koki Kanda, Tohoku University, Sendai, Japan, University, Chengdu, China Keiichiro Kaneshima, Takayuki Miyakoshi, Tomoya 501: Investigations on Two-body Wear of Kitano, Hideki Kanebako, Sun Medical Technology Dental Materials with ABREX Research Corporation, Nagano, Japan, Koshi Adachi, Jürgen Geis‐Gerstorfer, University of Tübingen, Tohoku University, Sendai, Japan Tübingen, Germany, Wolfgang Weinhold, Innowep GmbH, Würzburg, Germany, Christine Schille, BM - Biomimetics University of Tübingen, Tübingen, Germany 1287: Lubrication Study of Artificial Salivas for WE3-BM1 Bioinspiration in Macro- Oral Dryness (Xerostomia) engineering Roberto Vargiolu, Cyril Pailler‐Mattei, Hassan Room 4 14:00 – 15:40 Zahouani, ENISE ­ École Centrale de Lyon, Saint­ 1160: Optimised Design of a Foldable Struc- Etienne, France ture Bio-Inspired by the Structure of Pollen 377: Tribological Properties of Mucins: Influ- Grains ence of Purification, pH, Type and Biochemi- Nicolò Corrado, Cecilia Surace, Politecnico di Torino, cal Degradation Torino, Italy, Nicola Pugno, Università di Trento, Jan B. Madsen, Kirsi I. Pakkanen, Maher Hachem, Trento, Italy Birte Svensson, Seunghwan Lee, Technical 203: The Regulative Tactic of Frictional and University of Denmark, Kgs. Lyngby, Denmark Adhesive Contact of Gecko Foot on Different 1201: Mechanical Behavior of Nanofilled Den- Slopes tal Resins Subjected to Cyclic Wear in Liquid Zhouyi Wang, Aihong Ji, Zhendong Dai, Nanjing Environment University of Aeronautics and Astronautics, Nanjing, Olivier Etienne, Hervé Pelletier, Université de China Strasbourg, Strasbourg, France, Youri Arntz, Université de Strasbourg, Illkirch, France, Damien

23 Technical Sessions WTC 2013

1141: Production and Mechanical Behavior of Ich T. Tran, Francois Robbe‐Valloire, Muriel Micro-encapsulated Self-healing Cement: a Quillien, LISMMA, Saint­Ouen, France Case Study 890: Roughness-induced Optical Properties of Paola Antonaci, Politecnico di Torino, Torino, Italy, Tribological Surfaces Nicola M. Pugno, Università di Trento, Trento, Italy, Peter Somkuti, András Vernes, AC2T Research Jean‐Marc C. Tulliani, Politecnico di Torino, Torino, GmbH, Wiener Neustadt, Austria Italy 933: Experiment Study on Friction and Adhe- ST – Surface Tribology sion Behaviors of an Equal Rough Surface by Using an AFM WE1-ST11 Coatings 6 Tianmao Lai, Yanfei Fang, Qianqian Yang, Ping Huang, South China University of Technology, Room 3 8:30 – 10:30 Guangzhou, China 384: Experimental Investigation into the Cavi- 1223: Elastic Contact of Fibrillar Features on tation Phenomena at a Slip/non-slip Surface Rough Surface Evan Thomas, University of Sussex, Brighton, United Peyman Ansari, Bilsay Sümer, Hacettepe University, Kingdom, Mircea Pascovici, Politehnica University, Ankara, Turkey Bucharest, Romania, Karolina Jablonka, Romeo Glovnea, University of Sussex, Brighton, United 743: A New Approach for Rough Surface Gen- Kingdom eration Arthur Francisco, Université de Poitiers, Angoulême, 606: Tribological Behavior of Al2O3/SiO2 France, Noël Brunetière, Université de Poitiers, Mixed Oxide Coatings Deposited by Sol-gel Futuroscope Chasseneuil, France Route on Stainless Steels Alexis Marsal, Florence Ansart, Viviane Turq, Jean‐ WE2-ST13 Contact Mechanics 4 Pierre Bonino, Université de Toulouse, Toulouse, France, Jean‐Michel Sobrino, Yan‐Ming Chen, Julien Room 3 11:00 – 13:00 Garcia, Centre Technique des Industries Mécaniques, 220: A Comparative Study of Fretting Modes I Senlis, France and Ii for Coated Substrates and Plastic Bod- 954: Stick-Slip Friction of Diamond Tip on ies Thibaut Chaise, Benjamin Fulleringer, Daniel Nélias, Cross-Linking Nanostructured Carbon Film Xue Fan, Liwei Yu, Dongfeng Diao, Xi’an Jiaotong Université de Lyon, Villeurbanne, France University, Xi’an, China 614: Fundamental Aspects in Friction and Wear Mechanisms of Hard Amorphous Car- 1061: Wear Behaviour of Nanoporous Alu- bon Coatings mina Coatings from Anodic Oxidation Volker Weihnacht, Stefan Makowski, Andreas Stefanie Hanke, Michael Schymura, Daniel Stickel, Leson, Fraunhofer Institute Material and Beam Alfons Fischer, University of Duisburg­Essen, Technology (IWS), Dresden, Germany Duisburg, Germany 1191: Contact Behavior of the Hard Thin Ce- 639: The Effect of High Sliding Speed on Fric- ramic Coatings under Cyclic Loading tion in Aqueous Conditions Fjodor Sergejev, Liina Lind, Maksim Antonov, Priidu Arnold Ismailov, Erkki Levänen, Tampere University Peetsalu, Eron Adoberg, Tallinn University of of Technology, Tampere, Finland Technology, Tallinn, Estonia 1114: Friction of Ice Sublimating from Rough 338: Nano-tribological and Tribo-chemical Surfaces Properties of Diamond-like Carbon Coatings Siegfried Derler, Valentin Strässle, René M. Rossi, During Sliding Gelu‐Marius Rotaru, Empa ­ Swiss Federal Ming Xu, Longqiu Li, Harbin Institute of Technology, Laboratories for Materials Science and Technology, Harbin, China, Andrey Ovcharenko, Western Digital St. Gallen, Switzerland Corporation, San Jose, CA, United States, Wenping WE1-ST12 Roughness 1 Song, Guangyu Zhangh, Harbin Institute of Technology, Harbin, China Room 4 8:30 – 10:30 752: Molecular Dynamics Study of Tribological 1245: Wear Examination through Measure- Properties of Ultra-thin Diamond-like Carbon ment of Surface Topography Films Deposited on Diamond Substrates Pawel Pawlus, Jaroslaw Sep, Lidia Galda, Andrzej Qingkang Liu, Wenping Song, Longqiu Li, Harbin Dzierwa, Wieslaw Grabon, Waldemar Koszela, Institute of Technology, Harbin, China, Andrey Rzeszow University of Technology, Rzeszow, Poland Ovacharenko, Western Digital Corporation, San Jose, 244: Validity of the Sum Surface Assumption CA, United States, Guangyu Zhang, Zhenxiu Hou, in the Case of Static Contact between Rough Ming Xu, Harbin Institute of Technology, Harbin, Periodic Surfaces China

24 WTC 2013 Technical Sessions

1257: Observation of the Real Contact Area of Toshihiko Ichihashi, Mitsugu Kudo, Idemitsu Kosan Carbon Nanotube Film Co.,Ltd., Tokyo, Japan, Shigeyuki Mori, Iwate Yosuke Tsukiyama, Naoya Fukuda, Isami Nitta, University, Morioka, Japan Niigata University, Niigata, Japan, Wataru 816: In-situ Interface Chemical Characteriza- Norimatsu, Michiko Kusunoki, Nagoya University, tion of a Boundary Lubricated Contact Nagoya, Japan Yugal Rai, Anne Neville, Ardian Morina, University of Leeds, Leeds, United Kingdom WE2-ST14 Surface Evolution and Wear 2 1193: Transfer of Titanium in Sliding Contacts Room 4 11:00 – 13:00 – New Discoveries and Insights Revealed by in 186: Waveforms and Frequency Spectrum Situ Studies in the SEM Analysis of Acoustic Emission Signals from Jannica Heinrichs, Uppsala University, Uppsala, Erosive Wear of Pipeline Materials (X65) Sweden, Mikael Olsson, Dalarna University, Jonathan Ukpai, Richard Barker, Anne Neville, Borlänge, Sweden, Staffan Jacobson, Uppsala University of Leeds, Leeds, United Kingdom University, Uppsala, Sweden 202: Representation of Wear Data by Power Curves WE4-ST16 Roughness 2 Abhro Choudhury, Savio Sebastian, PES Institute Of Room 3 16:10 – 17:30 Technology, Bangalore, India 982: Ultraprecision Chemical-mechanical Pol- 659: Comparison of Tribological Behavior of ishing of GaN with Different Abrasive One-process and Two-process Steel Surfaces Chunli Zou, Guoshun Pan, Xiaolei Shi, Gong Hua, under Ball-on-disc Tests Tsinghua University, Beijing, China Andrzej Dzierwa, Pawel Pawlus, Rzeszow University 469: Investigation on the Acid Final Chemical of Technology, Rzeszow, Poland, Wieslaw Zelasko, Mechanical Polishing of Aluminum Alloy Group of Technical Schools in Lezajsk, Lezajsk, Hua Gong, Guoshun Pan, Zhonghua Gu, Xinchun Lu, Poland Tsinghua University, Beijing, China 238: The Effect of Elastomer Surface Splitting 222: Prediction of the Surface Roughness of on Stick-Slip Motion Shot Peened Surfaces Yuri Kligerman, Michael Varenberg, Technion ­ Mandikizinoyou Taro, Thibaut Chaise, Daniel Nélias, Israel Institute of Technology, Haifa, Israel Université de Lyon, Villeurbanne, France 1161: Atomic Origins of Wear in Ionic Solids 683: Viscoelastic Contact Mechanics: Numeri- Brandon A. Krick, Kellon R. Marchman, Kathryn cal Simulations with Experimental Validation Harris, W. Gregory Sawyer, University of Florida, Carmine Putignano, Politecnico di Bari, Bari, Italy, Gainesville, FL, United States Tom Reddyhoff, Daniele Dini, Imperial College 699: Influence of Surface Dimpling on Tri- London, London, United Kingdom, Giuseppe bology of Lubricated Rolling/Sliding Point Carbone, Politecnico di Bari, Bari, Italy Contacts Subjected to Short Stroke Recipro- cating Motion WE4-ST17 Surface Treatments 1 Ullattil Sudeep, N. Tandon, R.K. Pandey, IIT Delhi, Room 4 16:10 – 17:30 New Delhi, India 524: Nano-multilayered and Nanostructured WE3-ST15 In Situ Formed Tribofilms Hard PVD Coatings for Tool/Dies at Me- dium/High Temperatures Room 3 14:00 – 15:40 Gonzalo G. Fuentes, E. Almandoz, Asociación de la 301: Seeing the Third-body Formation of Me- Industria Navarra, Galar­Pamplona, Spain tallic Tribosystems by Novel on-line Tri- 1093: Wavelet Packet Decomposition for Fail- bometry ure Analysis Monitoring Martin Dienwiebel, Tim Feser, Spyridon Korres, Davide Bianchi, Erwyn Mayhofer, AC2T Research Karlsruhe Institute of Technology, Pfinztal, Germany GmbH, Wiener Neustadt, Austria, Martin Gröschl, 527: Wear Characteristics of Phenolic Resin Andras Vernes, Gerhard Betz, Technische Universität Matrix Composites with Addition of Metal Wien, Wien, Austria Oxide 565: Tribological Characteristics of Self- Katsuya Okayama, Hiroya Kishimoto, ADVICS Co. lubricating Spherical Plain Bearings Treated Ltd., Toyota, Japan, Ken’ichi Hiratsuka, Chiba by the Rare Earth Institute of Technology, Narashino, Japan Ming Qiu, Yingchun Li, Long Chen, Chenhui Jia, 686: Relationship between Friction Character- Henan University of Science and Technology, istics of Wet Clutches and Concentrations of Luoyang, China Additives Obtained by in situ Observation of 963: Scratch Behavior of Re-structured Car- Oil Films bon Coatings for Magnetic Disks by Oxygen Plasma Etching

25 Technical Sessions WTC 2013

Meiling Guo, Dongfeng Diao, Liwei Yu, Xi’an Jiaotong Ronaldo Câmara Cozza, Cláudio Geraldo Schön, University, Xi’an, China Universidade de São Paulo – Escola Politécnica, São Paulo, SP, Brazil FW – Dry Friction and Wear 62: Effect of Sliding Speed and Humidity on the Nanowear of Si/SiO2 Pair WE1-FW6 Theory of Friction and Wear, Linmao Qian, Southwest Jiaotong University, Numerical Simulation 5 Chengdu, China, Seong H. Kim, Pennsylvania State Room 5 8:30 – 10:30 University, University Park, PA, United States, Lei 1068: Modeling Pre-sliding Behaviour of a Chen, Xiaodong Wang, Binjun Yu, Zhongrong Zhou, Multi Asperity Contact Including the Loading Southwest Jiaotong University, Chengdu, China History 65: Generation of Ammonia During Wear Agnieszka Winogrodzka, Matthijn B. de Rooij, Dik J. Processes in Adhesive Wear Schipper, University of Twente, Enschede, Hiroshi Mishina, Kentaro Chiba, Chiba University, Netherlands Chiba, Japan, Alan Hase, Saitama Institute of 1073: Influence of Tribological Parameters on Technology, Fukaya, Japan Wear Behaviour 81: Evaluation and Prediction of the Effect of Claudia Lenauer, Thomas Wopelka, Martin Jech, Load Frequency on the Wear Properties of András Vernes, AC2T Research GmbH, Wiener pre-cracked Nylon 66 Neustadt, Austria Ahmed Abdelbary, Mohamed N. Abouelwafa, 1091: Discrete Elements Models of Heteroge- Ibraheem M. El Ffahham, Alaa H. Hamdy, Alexandria neous Friction Material: a Numerical Study of University, Alexandria, Egypt Wear WE3-FW8 Mechanisms of Wear 2 Matthieu Champagne, INSA­Lyon, Villeurbanne, France, Mathieu Renouf, Université Montpellier 2, Room 5 14:00 – 15:40 Montpellier, France, Yves Berthier, INSA­Lyon, 266: Thermomechanical Wear of Slipper and Villeurbanne, France Rail in Rocket Sled System 1156: Competition between 3rd Body Flows Chang‐Dong Yeo, Texas Tech University, Lubbock, TX, and Local Contact Dynamics United States, Anthony Palazotto, Air Force Institute Aurélien Saulot, INSA­Lyon, Villeurbanne, France, of Technology, WPAFB, OH, United States, Rodolfo Francesco Massi, University of Rome "La Sapienza", Buentello, Air Force Institute of Technology, WPAFB, Rome, Italy, Mathieu Renouf, Université Montpellier OH, United States 2, Montpellier, France, Yves Berthier, INSA­Lyon, 730: Adhesive Transfer and Cutting Wear in Villeurbanne, France Aero-Engine Abradable Lining Contacts 1171: A Numerical Method to Predict Wear Nicola Fois, Jonathan Stringer, Matthew Marshall, Evolution in Wheel-rail Contact under Partial University of Sheffield, Sheffield, United Kingdom Slip Conditions 807: A Particle Shape Definition Related to George Gavrilă, Spiridon Crețu, Technical University Third-body Abrasive Wear "Gheorghe Asachi", Iaşi, Romania Martijn Woldman, Emile van der Heide, University of 1232: The Role of Micro-slip in Static and Ki- Twente, Enschede, Netherlands, Tiedo Tinga, netic Friction Netherlands Defence Academy, Den Helder, Jeffrey Streator, Georgia Institute of Technology, Netherlands, Marc Masen, University of Twente, Atlanta, GA, United States Enschede, Netherlands 897: Study of the Scratch Resistance of a WE2-FW7 Mechanisms of Wear 1 Coated Material with Smoothed or Patterned Room 5 11:00 – 13:00 Interface 1307: New Analytical Limiting Friction Laws Tristan Bourrel, Institut Charles Sadron, Strasbourg, and Universal Tribological Constants of Dry France, Céline D'Orléans, DELPHI France SAS, Static and Kinetic Friction Illkirch Graffenstaden, France, Vincent Le Houérou, Vladimir I. Pozhbelko, South­Ural State University, Joël Krier, Christian Gauthier, Institut Charles Chelyabinsk, Russian Federation Sadron, Strasbourg, France 30: Effects of Slip and Twinning Deformation 966: Observation of Wear Track Generation Systems upon Friction and Wear at Single During Single Asperity Abrasion of Metallic Crystal Faces of Calcite(CaCO3) Coatings Hitoshi Shindo, Mai Kobayashi, Chuo University, Chang‐Lae Kim, Dae‐Eun Kim, Yonsei University, Tokyo, Japan, Kaori Niki, Chiba University, Chiba, Seoul, Republic of Korea Japan 44: Is There a Third Abrasive Wear Mode?

26 WTC 2013 Technical Sessions

WE4-FW9 Mechanisms of Wear 3 James Sweeney, University of Newcastle, Newcastle, Room 5 16:10 – 17:30 Australia, Faiz U. Shah, Luleå University of Technology, Luleå, Sweden, Fredrik Schaufelberger, 1027: Magnetotribology of Sliding Ferromag- Olof Ramström, KTH Royal Institute of Technology, netic Steel / Ferromagnetic Steel Contact in Stockholm, Sweden, Oleg N. Antzutkin, Luleå Magnetic Field University of Technology, Luleå, Sweden, Rob Atkin, Hamid Zaïdi, Adji C. Ba, Université de Poitiers, University of Newcastle, Newcastle, Australia, Sergei Futuroscope Chasseneuil, France, A. Fnidki, Glavatskih, Mark W. Rutland, KTH Royal Institute of Université de Rouen, Rouen, France, Jean Frêne, Technology, Stockholm, Sweden Université de Poitiers, Futuroscope Chasseneuil, France 247: Lubrication of Iron Oxide by Adsorbed C18 Fatty Acids in Vacuum: A Quantum 1051: Influences of Non-friction Time, Tem- Chemistry MD Simulation perature and Humidity on Severe-mild Wear Sophie Loehle, Clotilde Minfray, Christine Matta, Transition of Iron Thierry Le Mogne, Jean‐Michel Martin, École Takaaki Tsutsumi, Ken'ichi Hiratsuka, Yoshihiro Centrale de Lyon, Écully, France, Raphaele Iovine, Nagata, Chiba Institute of Technology, Narashino, TOTAL, Solaize Research Center, Solaize, France, Japan Yukiko Obara, Kenji Inaba, Ryuji Miura, Nozomu 1148: Effect of Varying Load on the Tribologi- Hatakeyama, Akira Miyamoto, Tohoku University, cal Behaviour of a Steel/Al2O3-TiO2 Ceramic Aoba, Japan Coating Mattia Merlin, Chiara Soffritti, Reyna Vazquez, Gian WE2-LA7 Ionic Liquids I Luca Garagnani, University of Ferrara, Ferrara, Italy Room 6 11:00 – 13:00 1260: Competition between Local Fatigue and 189 – Keynote: Influence of Ion Structure and Wear of 7075 Aluminum Alloy Induced by Ro- Surface Potential on Ionic Liquid Lubrication tational Fretting Wear Rob Atkin, University of Newcastle, Newcastle, Ming‐Xue Shen, Zhen‐Bing Cai, Yan Zhou, Ji‐Liang Australia Mo, H.M. Shen, Southwest Jiaotong University, Chengdu, China, Xue‐Dong Peng, Zhejiang University 157: Surface-chemical Characterization of Boundary-layer Lubricant Films Formed in of Technology, Hangzhou, China, Min‐Hao Zhu, Southwest Jiaotong University, Chengdu, China the Presence of Alkyl Sulfate Ionic Liquids Andrea Arcifa, ETH, Zürich, Switzerland, Antonella LA – Lubricants and Additives Rossi, Università degli Studi di Cagliari, Cagliari, Italy, Rosa M. Espinosa‐Marzal, Nicholas D. Spencer, WE1-LA6 Additives II ETH, Zürich, Switzerland Room 6 8:30 – 10:30 1264: Tribological Comparison of Monoca- tionic and Dicationic Pyridinium Ionic Liquids 670 – Keynote: Elementary Steps in The For- Francesco Pagano, IK4­Tekniker, Eibar, Spain, Maria mation of Boundary Films on Copper Mahrova, Universidad de Vigo, Vigo, Spain, Raquel Wilfred Tysoe, University of Wisconsin Milwaukee, Bayon, IK4­Tekniker, Eibar, Spain, Angel Valea, Milwaukee, WI, United States Universidad del País Vasco, Leioa, Spain, Amaya 252: IF-MoS2 Based Lubricants: Influence of Igartua, IK4­Tekniker, Eibar, Spain Shape and Crystal Structure 443: The Effect of Surface Conformation of Fabrice Dassenoy, Imène Lahouij, Béatrice Vacher, Imidazolium-based Ionic Liquids on Friction École Centrale of Lyon, Écully, France Property 650: Comparative Consideration of Micro- Seiya Watanabe, Tokyo University of Science, Tokyo, scopic Friction Characteristic of Tribofilms Japan, Miki Nakano, Koji Miyake, National Institute Produced from Different ZnDTPs of Advanced Industrial Science and Technology, Saiko Aoki, Yoshihiro Nakada, Masabumi Masuko, Tsukuba, Japan, Ryo Tsuboi, Shinya Sasaki, Tokyo Akihito Suzuki, Tokyo Institute of Technology, Tokyo, University of Science, Tokyo, Japan Japan 71: High Pressure Rheology of Ionic Liquids 386: Study on the Behaviour of Polar Addi- Based on Phase Diagram tives in EHD Contacts by Electrical Capaci- Nobuyoshi Ohno, Toshifumi Mawatari, Bo Zhang, tance Akira Nakajima, Saga University, Saga, Japan, Karolina Jablonka, Romeo Glovnea, University of Motohiro Kaneta, Brno University of Technology, Sussex, Brighton, United Kingdom, Jeroen Bongaerts, Brno, Czech Republic SKF Engineering and Research Centre, Nieuwegein, 206: Film Thickness of Ionic Liquids Under Netherlands High Contact Pressures 257: Biodegradable Ionic Liquids as Lubricants Dan Guo, Huaping Xiao, Guoshun Pan, Jianbin Luo, Nicklas Hjalmarsson, Rubén Álvarez Asencio, KTH Tsinghua University, Beijing, China Royal Institute of Technology, Stockholm, Sweden,

27 Technical Sessions WTC 2013

WE3-LA8 Ionic Liquids II LF – STLE/ASME – Lubrication Room 6 14:00 – 15:40 Fundamentals 633: Tribochemical Reaction of Ionic Liquids WE1-LF6 Textured and Rough Surfaces under Vacuum Condition Shouhei Kawada, Seiya Watanabe, Yuriko Kondo, I Ryo Tsuboi, Shinya Sasaki, Tokyo University of Room 7 8:30 – 10:30 Science, Tokyo, Japan 1132: Friction and Lubrication of Textured 315: Lubrication Performance of Ionic Liquids Surfaces in Elasto-Hydrodynamic Contacts as Lubricants for Space Mechanisms under Johan Guégan, Amir Kadiric, Imperial College High Vacuum and Low Temperature London, London, United Kingdom, Tom Reddyhoff, Kenji Kobayashi, Akihito Suzuki, Masabumi Masuko, Guillermo Morales‐Espejel, SKF Engineering and Tokyo Institute of Technology, Tokyo, Japan, Research Centre, Nieuwegein, Netherlands, Hugh Yukitoshi Fujinami, Idemitsu Kosan Co. Ltd., Spikes, Imperial College London, London, United Ichihara, Japan, Takashi Nogi, Shingo Obara, Japan Kingdom Aerospace Exploration Agency, Chofu, Japan 1082: Performance of Transient Surface Tex- 605: Tribological Properties of Imidazolium- ture in Hydrodynamic Bearings based Ionic Liquids and the Influence of Po- Simon Medina, Daniele Dini, Mark Fowell, Andy larization Olver, Imperial College London, London, United Christian Dold, Tobias Amann, Andreas Kailer, Kingdom Fraunhofer Institute for Mechanics of Materials IWM, 740: Effect of Dimples on the Line Contacts Freiburg, Germany Lichun Hao, Yonggang Meng, Tsinghua University, 635: Tribological Properties of Halogen-free Beijing, China, Cheng Chen, Shell Global Solutions, Ionic Liquids against Hard Materials Houston, TX, United States Yuriko Kondo, Ryo Tsuboi, Shinya Sasaki, Tokyo 1050: Increase of Film Thickness by Nano- University of Science, Tokyo, Japan Texturing under Elastohydrodynamic Lubrica- 209: Uncovering the Crucial Properties for IL- tion mediated Lubrication Tomoko Hirayama, Mitsutaka Ikeda, Toshiteru Rosa M. Espinosa‐Marzal, Kim Liu, Andrea Arcifa, Suzuki, Takashi Matsuoka, Doshisha University, ETH Zurich, Zurich, Switzerland, Antonella Rossi, Kyotanabe, Japan, Hiroshi Sawada, Kosuke Università degli Studi di Cagliari, Cagliari, Italy, Kawahara, Shunji Noguchi, Canon Machinery Inc., Nicholas D. Spencer, ETH Zurich, Zurich, Switzerland Kusatsu, Japan 484: Investigating the Impact of Surface WE4-LA9 Greases Roughness on the EHL Film Thickness Using a Room 6 16:10 – 17:30 Homogenization Technique 490: Characterization of Nano Size Thickener Francesco S. Guerrieri Paleotti, Bernhard Scheichl, Fiber in Grease by SAXS AC2T Research GmbH, Wiener Neustadt, Austria Yoshiyuki Suetsugu, Yusuke Nakanishi, Yusuke 1048: Numerical Investigation on the Effects Iseki, Hiroki Sekiguchi, Yukitoshi Fujinami, Idemitsu of Surface Geometry in Transient Flow Condi- Kosan Co.,Ltd., Sodegaura, Japan tions 413: Grease-lubricated Reciprocated Sliding of Andrei Gherca, Aurelian Fatu, Mohamed Hajjam, a ZrO2 - Al2O3 Couple in High Vacuum Patrick Maspeyrot, Université de Poitiers, Emile van der Heide, Bert Dillingh, Norbert Koster, Angoulême, France Edwin Stam, Esther Weltevreden, Edwin Gelinck, TNO, Eindhoven, Netherlands WE2-LF7 Textured and Rough Surfaces II 1089: A Fundamental Study on the Deteriora- tion and the Service Life of Grease in Traction Room 7 11:00 – 13:00 Motor of Railway 128: Effect of Moving Body Mass on Impact Sumiko Hibino, Tetsuya Hosoya, Railway Technical EHL Contacts with Surface Ridges Research Institute, Kokubunji, Japan Motohiro Kaneta, Brno University of Technology, 16: Development of Measuring Method of Brno, Czech Republic, Feng Guo, Jing Wang, Qingdao Grease Base Oil Film Thickness by Using High Technological University, Qingdao, China, Ivan Melting Point Fluorescent Agent on Various Krupka, Martin Hartl, Brno University of Technology, Substance of Ground Brno, Czech Republic Yauyoshi Tozaki, Keiji Nishiwaki, Kinki University, 950: Effect of Surface Ridges on Oil Film Tem- Higashiosaka, Japan perature in EHL Contacts Hiroshi Nishikawa, Takahito Shimada, Satoshi Tsuda, Kyushu Institute of Technology, Kitakyushu,

28 WTC 2013 Technical Sessions

Japan, Motohiro Kaneta, Brno University of 82: Highly Sensitive Normal Force Measure- Technology, Brno, Czech Republic ment with Accurate Sliding Gap Control for 1208: Surface Roughness Effects in Thermal Evaluation of Boundary and Thin-film Lubri- EHL Contacts cation Phenomena Petr Sperka, Ivan Krupka, Martin Hartl, Brno Kenji Fukuzawa, Tomoya Takaba, Shintaro Itoh, University of Technology, Brno, Czech Republic Hedong Zhang, Nagoya University, Nagoya, Japan 901: A Two-Scale Method for Incorporating 466: Nano-scale Measurements of the Energy the Effects of Three-Dimensional Surface To- Dissipation Using a Quartz Crystal Resonator pography in an Elastohydrodynamic Line Con- Daisuke Inoue, Shingo Machida, Junko Taniguchi, tact Masaru Suzuki, University of Electro­Communica­ Greg N. de Boer, L. Gao, Rob W. Hewson, Harvey M. tions, Chofu, Japan, Makoto Ishikawa, Kouji Miura, Thompson, University of Leeds, Leeds, United Aichi University of Education, Kariya, Japan Kingdom WE2-VI7 Special Nanotribological 415: Lubricated Point-contacts Model with Systems the Consideration of Inclusions Wen‐zhong Wang, Sheng‐guang Zhang, Ji‐Bin Hu, Room 8 11:00 – 13:00 Beijing Institute of Technology, Beijing, China, Yuan‐ 159 – Keynote: Nanotribology, Nanomechanics zhong Hu, Tsinghua University, Beijing, China and Materials Characterization Studies and 749: Experimental Validation of a Mixed Lu- Applications to Bio/nanotechnology and brication Model for Contact Between Parallel Biomimetics Rough Surfaces Bharat Bhushan, The Ohio State University, Salima Senhadji, Université d’Oran, Oran, Algeria, Columbus, United States Francois Robbe‐Valloire, Laboratoire d’Ingenierie 1199: A Model of Friction between a CNT and des Sytèmes Mécaniques et des Matériaux, Saint­ a Surface George Adams, Yu‐Chiao Wu, Nick McGruer, Ouen, France, Farid Belarifi, Université d’Oran, Oran, Northeastern University, Boston, MA, United States Algeria 457: Super-Smooth Sliding Pins Processed VI – VIENNANO’13-Nanotechnology with Gas Cluster Ion Beams for Pin-on-Disk Tests of Nanometer-Thick Liquid Lubricant WE1-VI6 Measurement and Testing in Films the Nano-Range Renguo Lu, Hedong Zhang, Nagoya University, Nagoya, Japan, Yasunaga Mitsuya, Nagoya Industrial Room 8 8:30 – 10:30 Science Research Institute, Nagoya, Japan, Kenji 1153: Scanning Probe Microscopy for Rough- Fukuzawa, Shintaro Itoh, Nagoya University, ness Analysis of Complex Shape Samples Nagoya, Japan Francesco Tantussi, Daniele Vella, Francesco Fuso, 862: Analysis of Elastic Contact Due to Menis- Maria Allegrini, Luca Romoli, University di Pisa, Pisa, cus Adhesion Force Acting on Sphere/Flat Italy, Marco Fiaschi, Continental Automotive Italy Geometry S.p.A., Pisa, Italy Kyosuke Ono, Tokyo Institute of Technology, 1173: Atomic Force Microscope Circular Hachioji, Japan Mode: A New Nanoscale Tribometer for Fast 251: Understanding the Deformation of Soot and Accurate Measurements of Friction and Particle/Agglomerates in a Dynamic Contact: Adhesion at the Nanometer Scale TEM in Situ Compression and Shear Experi- Pierre‐Emmanuel Mazeran, Université de ments Technologie de Compiègne, Compiègne, France, Fabrice Dassenoy, Imène Lahouij, Béatrice Vacher, Olivier Noël, Hussein Nasrallah, Université du Maine, École Centrale of Lyon, Écully, France, Kaustav Sinha, Le Mans, France David A. Brass, Maryann Devine, Jai Bansal, 977: Nanoscratching of Multi-layer Graphene INFINEUM US, Linden, NJ, United States by Molecular Dynamics Simulations 170: Effect of Lubricant Materials on Light Qi Zhang, Dongfeng Diao, Xi’an Jiaotong University, Contact between Dynamic Fly Height Control Xi’an, China, Shandan Bai, Yuji Higuchi, Tohoku Sliders and Disk Surfaces in Hard Disk Drives University, Sendai, China, Nobuki Ozawa, Momoji Norio Tagawa, Hiroshi Tani, Kazumi Iwasaki, Kansai Kubo, Shenzhen University, Shenzhen, China University, Suita, Japan 111: Express Test - A Novel Technique for Rapid Acquisition and Mapping of Accurate Mechanical Properties Holger Pfaff, Agilent Technologies, Frankfurt, Germany

29 Technical Sessions WTC 2013

WE3-VI8 Nano-Tribology Lubrication Pengyu Zhang, Lifeng Liu, Yongqiang Zhang, Mechanisms Dongfeng Diao, Xi’an Jiaotong University, Xi’an, China Room 8 14:00 – 15:40 1216: Effects of Annealing on AlTiN Coatings 143: Lubrication Mechanisms of Hollow Core before Machining under Severe Cutting Con- Inorganic Fullerene like WS2 Nanoparticles: in ditions Situ TEM Approach Damien Joly, Caroline Richard, René Leroy, Imène Lahouij, Béatrice Vacher, Fabrice Dassenoy, University of Tours, Tours, France École Centrale de Lyon, Écully, France 1291: Friction Properties of Artificial Turf 711: A Molecular Dynamics Study for Momen- Pitches: Macro and Nano Characterization tum Transport Phenomena in Nanoscale Liq- Elisabetta M. Zanetti, University of Perugia, Perugia, uid Bridge Italy, Cristina Bignardi, Alberto L. Audenino, Takashi Tokumasu, Tohoku University, Sendai, Politecnico di Torino, Torino, Italy Japan, Marie‐Hélène Meurisse, Nicolas Fillot, Philippe Vergne, Université de Lyon, Villeurbanne, BE – Bearings France 371: Synthesis of Nano Carbon Onion Thin WE1-BE6 Gas Bearings 1 Film by Plasma-Based Ion Implantation Room 9 8:30 – 10:30 Method and Its Tribological Properties Shu Sawai, Yuya Nakahara, Naohiro Matsumoto, 986: Dynamic Characteristics and Nonlinear Junho Choi, Takahisa Kato, University of Tokyo, Stability of Rotor-aerostatic Bearing System Bunkyo, Japan Jianjun Du, Jie Shan, Harbin Institute of Technology, Shenzhen, China 1043: Nanotribological “Zero-Wear” Effect Alexander S. Kuzharov, Andrey A. Kuzharov, Don 1009: Experimental Verification of Slot Re- State Technical University, Rostov­on­Don, Russian strictor Shape Influence on Gas Bearing Char- Federation, Huynh Nguyen, Tuyen Nguyen, Vietnam acteristics Academy of Science & Technology, Ha Noi, Viet Nam Tomohiko Ise, Akira Inoue, Toshihiko Asami, Fumiyoshi Kimura, Yoshiyuki Yamaguchi, University 1213: Examining the Role of Load Dependent of Hyogo, Himeji, Japan Bond Strain on Atomic Scale Defect Nuclea- tion in Nanoscopic Contacts 1115: Investigation on the Discharge Coeffi- James D. Batteas, Texas A&M University, College cient of Supply Micro Holes for Gas Bearings Station, TX, United States Federico Colombo, Terenziano Raparelli, Andrea Trivella, Vladimir Viktorov, Politecnico di Torino, PS2-VI Posters Torino, Italy Atrium 8:30 – 16:30 1117: Dynamic Characteristics of Air Foil Bearing Produced by Metal Injection Molding 267: Estimation of Triboresistance during Sur- Andy Tirta, Eungryul Baek, Pyung Hwang, face Nanoscanning Yeungnam University, Gyeongsan, Republic of Korea Victor Musalimov, Pavel Kovalenko, Svetlana Perepelkina, National Research University of 1263: High Speed Rotors with Elliptic Gas Information Technologies, Mechanics and Optics, Journal Bearings Saint­Petersburg, Russian Federation Guido Belforte, Federico Colombo, Terenziano Raparelli, Andrea Trivella, Vladimir Viktorov, 322: Theoretical Study of the van der Waals Rodrigo Villavicencio, Politecnico di Torino, Torino, Dispersion Forces Considering Material Dis- Italy tributions Hiroshige Matsuoka, Niki Kitahama, Shigehisa 1015: Numerical Analysis of Hydroinertia Gas Fukui, Tottori University, Tottori, Japan Bearing with Inclined Supply Feed Holes for High Speed Rotary Machines 680: Characterizing Material Transfer onto an Tomohiko Ise, Sayuri Nakano, Toshihiko Asami, Atomic Force Microscope Tip Resulting from University of Hyogo, Himeji, Japan, Yuki Endo, JEOL Nanoscale Dry Sliding Using Atom Probe To- RESONANCE Inc., Akishima, Japan, Fumiyoshi mography Kimura, Yoshiyuki Yamaguchi, Itsuro Honda, Christopher J. Tourek, Sriram Sundararajan, Iowa University of Hyogo, Himeji, Japan State University, Ames, IA, United States 937: Drag Reduction over Superhydrophobic WE2-BE7 Rolling Bearings 4 Surface in Micro-channel Room 9 11:00 – 13:00 Yunle Chang, Huichen Zhang, Dalian Maritime University, Dalian, China 542: Grease Lubrication in super Precision Bearings Operating at High Speed 976: In Situ TEM Investigation of Nanoinden- Feliciano Greco, SKF Industrie S.p.A., Villar Perosa, tation Behavior of Carbon Coated Silicon Sub- Italy, Jun Wang, Albert van den Kommer, SKF strate

30 WTC 2013 Technical Sessions

Engineering & Research Centre, Nieuwegein, Yu Chen, Yongsheng Zhu, Youyun Zhang, Xiaoran Netherlands Zhu, Key Laboratory of Education Ministry for 79: Active Piezoelectric-sensor Based Condi- Modern Design and Rotor­Bearing System, Xi’an, tion Monitoring System for Rolling Element China Bearings 846: Wear Detection by Monitoring Hydraulic Wenqu Chen, Rob S. Dwyer‐Joyce, University of Oil Contamination – an Experimental Com- Sheffield, Sheffield, United Kingdom parison between on-line and off-line Meas- 90: Skidding Analysis of High Speed Rolling urements Bearing in a Whirling Squeeze Film Damper Per‐Oskar Westin, Institute of Applied Hydraulics, Wei Chen, Junning Li, Libo Zhang, Xi’an Jiaotong Örnsködsvik, Sweden, Pär Marklund, Luleå University University, Xi’an, China of technology, Luleå, Sweden, Jon Sandström, Institute of Applied Hydraulics, Örnsködsvik, Sweden 169: Contact Analysis of Blade Bearing in Wind Turbine WE4-BE9 Fluid-Film Bearings 3 Shiyuan Pei, Xiwei Zhou, Hua Xu, Xi’an Jiaotong Univerisity, Xi’an, China, FengCai Wang, Wafangdian Room 9 16:10 – 17:30 Bearing Group Corporation (ZWZ), Wafangdian, 461: Modeling of the Main Bearings of a Multi- China Supporting Crankshaft of the Internal Com- 178: Effect of Oil Film Parameter on Vibration bustion Engine Acceleration and Electrical Pitting in Small Yuriy Rozhdestvensky, Nadezhda Khozeniuk, Ball Bearing Alexander Mylnikov, Igor Levanov, Vyacheslav Shoji Noguchi, Tokyo University of Sciene, Noda, Romanov, South Ural State University, Chelyabinsk, Japan, Tohru Kanada, Norifumi Miyanaga, Kanto Russian Federation Gakuin University, Yokohama, Japan 597: On the Performance of Diamond Bearings 1076: Contact Mechanism of Four Row Cylin- Designed for Boundary, Mixed-mode and Hy- drical Roller Bearing on Mill Roller drodynamic Lubrication Regimes H. Xi, Xi’an Jiaotong University, Xi’an, China, Z.Q. Brent A. Lingwall, Xiaobin Lu, Craig H. Cooley, Tim Wang, Wuhan University of Science & Technology, N. Sexton, US Synthetic Corporation, Orem, UT, Wuhan, China, H.Y. Guo, United Manufacturing United States, Michael M. Khonsari, Louisiana State Group, Yinchuan, China, S.N. Xu, National Research University, Baton Rouge, LA, United States Centre of Bearing Technology, Dalian, China, H. Xu, 533: Experimental Study of the Performance W. Chen, F.C. Wang, Xi’an Jiaotong University, Xi’an, of Tilting-pad Journal Bearings China Chunyang Zang, Shanghai University, Shanghai, China, Qing Ge, Shanghai Electric Power Generation WE3-BE8 Condition Monitoring and Equipment Co, Shanghai, China, Bing Wu, Jian Jin, Diagnostic Xiaojing Wang, Dengfeng Jiang, Gaoan Qi, Shanghai Room 9 14:00 – 15:40 University, Shanghai, China 367: Recognition of Wear State for Early De- 791: Thermo-molecular Gas-film Lubrication tection of Seizure in Slide Bearing Using (t-MGL) Analysis for MEMS Elements (Appli- Acoustic Emission Technique cation to HDD Flying Heads) Alan Hase, Saitama Institute of Technology, Saitama, Shigehisa Fukui, Naoya Kitagawa, Ryo Japan, Hiroshi Mishina, Chiba University, Chiba, Wakabayashi, Tottori University, Tottori, Japan, Japan, Masaki Wada, Polytechnic University, Kiyomi Yamane, Matsue National College of Kanagawa, Japan Technology, Matsue, Japan, Hiroshige Matsuoka, Tottori University, Tottori, Japan 108: Damage detection in Rolling Element Bearings by Acoustic Emission Outlier Analy- EC – ECOTRIB 2013 – Tribology of sis Machine Elements Jack R. Naumann, Rob S. Dwyer‐Joyce, Matt B. Marshall, University of Sheffield, Sheffield, United WE1-EC6 Automotive Tribology 3 Kingdom Room 10 8:30 – 10:30 481: Ferrograph Image Segmentation Using Morphology Watershed and Ant Colony Algo- 57: Using Fluorescence Technique for Lubrica- rithm tion Flow at Soft Contact in Oil Pipeline Pig- Jingqiu Wang, Long Zhang, Fengxia Lu, Xiaolei ging Application Wang, Nanjing University of Aeronautics and Shuhai Liu, Guibin Tan, Deguo Wang, Si‐wei Zhang, Astronautics, Nanjing, China China University of Petroleum­Beijing, Beijing, China 654: A Prediction Method of Mechanical 746: Tribological Analysis of the Piston-Liner Equipment Running Condition Based on System for Cylinder Deactivation Engine Multi-information and Multi-kernel SVR

31 Technical Sessions WTC 2013

Xianghui Meng, Zhinan Zhang, Youbai Xie, Shanghai Robin Mills, Emin Yusuf Avan, Robert Dwyer‐Joyce, Jiaotong University, Shanghai, China University of Sheffield, Sheffield, United Kingdom 248: The Effects of Lubricants with Additives on the Friction Force of Smooth and Artifi- WE3-EC8 2020 Interface: DLC with Low cially Textured Piston Rings SAPS Additives Anastasios Zavos, Pantelis Nikolakopoulos, Room 10 14:00 – 15:40 University of Patras, Patras, Greece 1298: The Effects of Low SAPS Oils on Cam- 916: The Use of Giant Magneto Resistive shaft / Tappet Tribocouples with Various DLC (Magnetometer) Sensors for Measuring the Coated Tappets in Motored and Fired Engines Performance of Direct Acting Tappets and the John Durham, Adam Kidson, Lubrizol Limited, Effect of Lubricant Rheology Hazelwood, United Kingdom Riaz A. Mufti, Jawad Aslam, Rehan Zahid, National 1299: Ab-initio Investigation of Chemical- University of Sciences and Technology, Islamabad, bond Formation at the DLC Surafce Pakistan, Farrukh Qureshi, The Lubrizol Matej Komelj, Mitjan Kalin, University of Ljubljana, Corporation, Wickliffe, OH, United States Ljubljana, Slovenia, John Durham, Lubrizol Limited, 9: The Impact of Engine and Driveline Lubri- Hazelwood, United Kingdom cants on Vehicle Fuel Consumption 1300: Tribological Behaviour of W -alloyed Neal M. Morgan, Robert Ian Taylor, Robert Carbon-based Coatings in Dry Sliding and Lu- Mainwaring, Shell Global Solutions (UK), Chester, bricated Steel Contact United Kingdom Manuel Evaristo, University of Coimbra, Coimbra, Portugal, Tomas Polcar, University of Southampton, WE2-EC7 Automotive Tribology 4 Southampton, United Kingdom, Albano Cavaleiro, Room 10 11:00 – 13:00 University of Coimbra, Coimbra, Portugal 1002: FGM Materials for Crucial Automotive 1301: Effect of Organic Lubricant Additives on Tribological Components: a Possible Future? the Tribological Performance and Tribofilm Flavia Gili, Davide Mangherini, Centro Ricerche Fiat, Formation in Diamond-Like-Carbon Coatings Orbassano (TO), Italy, Ludwig Weiler, Irene Mieskes, Hongyuan Zhao, Joe Lanigan, Ardian Morina, Anne Technische Universität Darmstadt, Darmstadt, Neville, University of Leeds, Leeds, United Kingdom, Germany, Frantisek Simancik, Juraj Korab, Slovak Thomas Polcar, Albano Cavaleiro, Universidade de Academy of Sciences, Bratislava, Slovakia, Katarzyna Coimbra, Coimbra, Portugal, Frederic Meunier, Pietrzak, Agata Strojny, Institute of Electronic Sulzer SOREVI SAS, Limoges, France Materials Technology, Warsaw, Poland, Stanislaw Stupkiewicz, Institute of Fundamental Technological WE4-EC9 Seals 1 Research (IPPT PAN), Warsaw, Poland Room 10 16:10 – 17:30 10: Friction, Oil Film Thickness, and Wear of 693: Frictional Behaviour of Radial Lip Seals in Piston Rings: Impact of Lubricants Mixed Lubrication Robert Ian Taylor, Neal M. Morgan, Shell Global Hirotaka Mizuta, NOK Corporation, Fujisawa, Japan, Solutions (UK), Chester, United Kingdom Joichi Sugimura, Kyushu University, Fukuoka, Japan 73: Tribology of Cam and Follower for Direct- 732: Numerical Model for Spiral Groove Me- type Valve Train chanical Seal Operating with Compressible Mitsuhiro Soejima, Kyushu Sangyo University, Lubricant in Inertial and Turbulent Regime Fukuoka, Japan, Toshiro Hamatake, Oita University, Jérôme Géhannin, Centre National d’études Oita, Japan Spatiales, Paris, France, Noël Brunetière, Université 97: Mixed Lubrication Analysis on the Piston de Poitiers, Futuroscope Chasseneuil, France Rings in Internal Combustion Engines 1090: A Comprehensive Model for the Simul- Toshiro Hamatake, Oita University, Oita, Japan, taneous Analysis of Temperature, Friction Mitsuhiro Soejime, Kyushu Sangyo University, and Wear in Radial Shaft Seal Rings Fukuoka, Japan Daniel Frölich, Barbara Jennewein, Christian Kaiser, 158: Toward Eco-tribological Design of Honed Bernd Sauer, University of Kaiserslautern, Surface Texture in Vehicle Engines Kaiserslautern, Germany Sabeur Mezghani, Ibrahim Demirci, Mohamed El 354: Mechanical Face Seals Operating in Mixed Mansori, Arts et Métiers ParisTech, Châlons­en­ and Hydrodynamic Regime: Theoretical and Champagne, France, Mohammed Yousfi, Renault Experimental Comparison S.A.S., Paris, France Khouloud Ayadi, Noël Brunetière, Bernard 213: Ultrasonic Mapping of Lubricant Film Tournerie, CNRS­Université de Poitiers, Futuroscope Thickness Along a Piston Skirt and its Use to Chassenuil, France, Didier Fribourg, Abdelaghani Indicate Piston Secondary Motions Maoui, CETIM Pôle Technologies de l’Etanchéité, Nantes, France

32 WTC 2013 Technical Sessions

MF – Tribology in Manufacturing Yating Huang, Chunling Meng, Xiuping Dong, Beijing Technology and Business University, Beijing, China, WE3-MF1 Surface and contact Dan Guo, Tsinghua University, Beijing, China conditions 467: Increased Wear Resistance of Ti6Al4V Room 7 14:00 – 15:40 Components Through Laser Cladded Metal Matrix Composite Coatings 825: Analysis of Morphology Wear Model of Filip Motmans, Marleen Rombouts, Gert Maes, Jo Moulds from Alloys of Copper ISO CuZn39Pb3 Verwimp, Raymond Kemps, Myriam Mertens, Willy in Injection Process Hendrix, Rosita Persoons, Flemish Institute for Alejandro Pereira, University of Vigo, Vigo, Spain, Technological Research (VITO), Mol, Belgium Primo Hernández, Hergome Ltd., Nave, Spain, Javier Martínez, José A. Pérez, University of Vigo, Vigo, 662: Suggestion of a Contact Model for the Spain, M. Wieczorowski, Poznan University of Generation Mechanism of Micro-Scratches in Technology, Poznan, Poland, Thomas Mathia, École Chemical Mechanical Planarization Centrale de Lyon, Écully, France In‐Ha Sung, Soyoung Jung, Hannam University, Daejeon, Republic of Korea, Hong Jin Kim, Samsung 895: Influence of the Rake Surface Texture of Electronics, Hwasung, Republic of Korea, Hosung the Twist Drill when Machining Aluminum Al- Kong, Hung‐Gu Han, Korea Institute of Science and loys Technology, Seoul, Republic of Korea Janaína A. Pereira, Álisson Rocha Machado, Federal University of Uberlândia, Uberlândia, Brazil PS2-MF Posters 942: Computational Study on Chemical Me- Atrium 8:30 – 16:30 chanical Polishing Properties of Perovskite Oxide Abrasive Grain 327: On the Role of Low Melting Point Insert Nobuki Ozawa, Miho Nakamura, Kentaro Materials on Friction During Friction Stir Kawaguchi, Takeshi Ishikawa, Yuji Higuchi, Momoji Welding Kubo, Tohoku University, Sendai, Japan Saurabh Dixit, Satish V. Kailas, Kamanio Chattopadhyay, Indian Institue of Science, 989: Modeling of Abrasive Tool Wear in Ma- Bangalore, India chining Using Statistical and Tribological Ap- proaches 379: On the Fundamental Mechanism of the Faycel Halila, École des Mines de Nancy, Nancy, Within-Wafer Non-Uniformity (WIWNU) in France, Christophe Czarnota, Université de Lorraine, Chemical Mechanical Planarization Metz, France, Mohammed Nouari, École des Mines de In‐Ha Sung, Woo Yul Yang, Hong Jin Kim, Samsung Nancy, Nancy, France Electronics, Hwasung, Republic of Korea 1125: Cost Efficient Tribological Systems in 487: Effect of Micro Texturing at Cutting Tool Steel Production Based on Life Cycle Optimi- Rake Face on Friction Force sation Hiroki Kiyota, Fumihiro Itoigawa, Takashi Markus Varga, M. Buranich, AC2T Research GmbH, Nakamura, Nagoya Institute of Technology, Nagoya, Wiener Neustadt, Austria, Karl Adam, Rudolf Japan Wimberger, Voestalpine Stahl GmbH, Linz, Austria, 526: Effect of Built-up Edges and Transfer Ewald Badisch, AC2T Research GmbH, Wiener Layers on the Wear State During Dry Cutting Neustadt, Austria of Steel With Cemented Carbide Tools Johannes Kümmel, Jens Gibmeier, Erich Müller, WE4-MF2 Wear Reinhard Schneider, Volker Schulze, Alexander Room 7 16:10 – 17:30 Wanner, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany 1178: Influence of High Pressure Jet Coolant During Turning Process of Aisi 316 Stainless 589: Study on Tribological Behavior in Com- Steel on Chip-tool Contact Area of Coated posite Injection Molding Processes of Micro- Cemented Carbide Tools cellular Foam/ in Mold Decoration for Slap-up Vitor T. Guimaraes Naves, Federal University of Plastic Triangulo Mineiro, Uberaba, Brazil, Marcio Bacci da Zhengying Lin, Youxi Lin, Wangli Hou, Fuzhou Silva, Federal University of Uberlândia, Uberlândia, University, Fuzhou, China Brazil, Flavio J. Da Silva, Federal University of 622: Self-Sharpening of Cutting Tool Edges in Espirito Santo, Vitoria, Brazil, Andre L. Beloni dos CFRP Machining Santos, Federal University of Triangulo Mineiro, Satoru Maegawa, Shinya Hayakawa, Fumihiro Uberaba, Brazil Itoigawa, Takashi Nakamura, Nagoya Institute of 295: Non-linear Finite Element Analysis of Technology, Nagoya, Japan Failure in Cu/Low-k Interconnect Megasonic 632: Dynamic Hydrophobicity of Silicone Cleaning Resin/VGCF Composite Sheet with Ultrasonic Vibration

33 Technical Sessions WTC 2013

Kenji Yanagisawa, Manabu Okada, Nagano National 759: Austenite Transformation Induced by College of Technology, Nagano, Japan Abrasion in a Fe-Mn-Al-C Alloy, Investigated 777: Influence of Feed Speed on Surface Qual- by Mössbauer Spectroscopy ity of Several Building Stones Jorge Ramos, Universidad Autónoma de Occidente, Mihai Botan, Catalin Pirvu, Constantin Georgescu, Cali, Colombia, J.F. Piamba, H. Sánchez, Germán A. Lorena Deleanu, "Dunarea de Jos" University of Perez, Universidad Del Valle, Cali, Colombia Galati, Galati, Romania 283: Different Mechanisms of Acoustic Emis- 1229: Controlling Temperature Variations on sion in Sliding Friction of Various Metal Pairs the Disc Surface in Ultra High Temperature Pengyi Tian, Yu Tian, Tsinghua University, Beijing, and High Vacuum Tribometers China Amit Ganguli, Anshuman Dube, Ducom Instruments, WE2-MT3 Polymers 1 Bangalore, India, Deepak H. Veeregowda, Ducom Instruments Europe B.V, Groningen, Netherlands, Room 1 11:00 – 13:00 Rubina Akkoji, Narendra M. Dube, Ducom 49: Design of Molecular Weight on Wear- Instruments, Bangalore, India resistant Materials of Modified UHMWPE 1249: Finite Element Simulations of the Cryo- with Cu (II) chelate of bissalicylaldehyde- genic Static Seal under Severe Environmental ethylenediamine Conditions Li Wu, Wuhan Institute of Technology, Wuhan, China, Soo Yeon Jang, Yong Hwi Kim, In‐Ha Sung, Hannam Xinlei Gao, Wuhan Polytechnic University, Wuhan, University, Daejeon, Republic of Korea China, Wanzhen Gao, Wuhan Research Institute of 1309: Wear Behavior of ISO 1.2738 Steel for Materials Protection, Wuhan, China, Xiuqing Bai, Plastic Molding Chengqing Yuan, Wuhan Unversity of Technology, B. Rivolta, R. Gerosa, Politecnico di Milano, Milano, Wuhan, China Italy, Donato Firrao, Politecnico di Torino, Torino, 156: Tribology of Thermoplastic Nanocompo- Italy, A. Ghidini, LucchiniRS S.p.A., Lovere (BS), Italy sites Nikolai K. Myshkin, Stepan S. Pesetskii, Sergei P. MT – Tribology of Materials Bogdanovich, Belarus National Academy of Sciences, Gomel, Belarus WE1-MT2 Metals 2 366: Stick-slip Behaviour of Polymer Films in Room 1 8:30 – 10:30 LHe 357: Experimental and Numerical Investiga- Géraldine Theiler, BAM Federal Institute for tions of Interfacial Processes in Metallic Con- Materials Research and Testing, Berlin, Germany, tacts Hannah Brice, MR Magnet Technology, Witney, Pantcho Stoyanov, Pedro A. Romero, Tommi T. Järvi, United Kingdom, Thomas Gradt, BAM Federal Matthias Scherge, Michael Moseler, Martin Institute for Materials Research and Testing, Berlin, Dienwiebel, Fraunhofer Institute for Mechanics of Germany Materials IWM, Freiburg, Germany 430: Characteristics of Micro-slip for Various 812: Abrasion Wear Performance of Elastomers on Flat and Sphere Arrayed Sur- Quenched Wear Resistant Steels faces Niko Ojala, Kati Valtonen, Tampere University of Takashi Fujimoto, Yuge National College of Maritime Technology, Tampere, Finland, Marke Kallio, Joonas Technology, Ochi, Japan Aaltonen, Pekka Siitonen, Metso Minerals, Inc., 521: Friction-Induced Vibrations of the Wa- Tampere, Finland, Veli‐Tapani Kuokkala, Tampere ter-Absorbed Thermoplastic Ester Elastom- University of Technology, Tampere, Finland ers 491: Wear-resistance Increase of High Speed Yoshitaka Uchiyama, Kanazawa University, Steel Surface Layer Kanazawa, Japan Mazhyn Skakov, Bauyrzhan Rakhadilov, D. 1302: An Examination of the Role of In-situ Serikbaev East Kazakhstan State Technical HDD Additives on Head-disk Interface Tri- University, Ust­Kamenogorsk, Kazakhstan, Michael bology Sheffler, Otto­von­Guericke Universität, Magdeburg, Vedantham Raman, Thomas Nguyen, Jorge Escobar, Germany Hitachi Global Storage Technologies, San Jose, CA, 619: Iron Based Self-lubricating Composites United States Jose D. Biasoli de Mello, Cristiano Binder, Gisele Hammes, Renan Schroeder, Aloisio N. Klein, WE3-MT4 Ceramics Universidade Federal de Santa Catarina, Room 1 14:00 – 15:40 Florianópolis, Brazil 27: Characterization of the Scratch Behavior of Architectural Glass

34 WTC 2013 Technical Sessions

Sebastian Schula, Jens Schneider, Technische PS2-MT Posters Universität Darmstadt, Darmstadt, Germany Atrium 8:30 – 16:30 228: Research on Green Automotive Brake 99: High velocity impact testing of thermal Materials With High Performance spray hard carbide coatings on steel sub- Chenghui Gao, Fushan He, Fuzhou University, strates Fuzhou, China Richard Waudby, Tommi Varis, Tomi Suhonen, 234: Tribological Behavior of a Silicon Car- Kenneth Holmberg, VTT Technical Research Centre bide/Carbone Dry Contact of Finland, Espoo, Finland, Marian Apostol, Matti Stéphanie Lafon‐Placette, Karl Delbé, Hélène Lindroos, Veli‐Tapani Kuokkala, Tampere University Welemane, Jean Denape, Université de Toulouse, of Technology, Tampere, Finland Tarbes, France, Marc Ferrato, Patrick Chéreau, 103: Estimation of Head Injury Criterion Score BOOSTEC, Bazet, France of Impact Attenuation Material Employed 350: In-situ Investigation of Lateral Junction around Playground Equipment Growth by Nanoindentation Yuji Ohue, Keita Miyoshi, Kagawa University, Yeau‐Ren Jeng, National Chung Cheng University, Takamatsu, Japan Chia­Yi, Taiwan 166: The Temperature Stability of the Subsur- 970: Experimental Investigation of Wear Be- face Zone Induced by Friction in Bismuth De- haviors of Bronze and Carbon Reinforced tected by Positron Lifetime PTFE Alloy Pivot Pin Bearings Jerzy Dryzek, Opole University, Opole, Poland Huseyin Imrek, Seyit M. Demet, Selcuk University, 193: Wear Characteristics of Cermet Coating Konya, Turkey Film under High Temperature WE4-MT5 Involved Phenomena 1 Mafumi Kimiwada, Katsumi Iwamoto, Tokyo University of Marine Science and Technology, Tokyo, Room 1 16:10 – 17:30 Japan, Kazuo Toyama, Tokyo University of Marine 848: Friction of Carbon Black and Silica Rein- Science and Technology, Tokyo, Japan forced Elastomers 241: Influence of Heat Treatment on Abrasion Milad Mokhtari, Dirk J. Schipper, University of Resistance of High-speed Steels Twente, Enschede, Netherlands, Tetyana V. Jan Suchánek, Czech Technical University, Prague, Tolpekina, Apollo Vredestein B.V.Ir., Enschede, Czech Republic Netherlands 269: Improvement of Tool Life of Aluminum 516: Fretting Wear Behaviour of Materials Extrusion Die Tools Used in Gas Turbine Combustor Components Andrés Morelos Zaragoza, Daniel A. Treviño Garza, Sathisha CH, GE Global Research, Bangalore, India, Francisco J. Inzunza Zavala, Zygmunt Haduch, George Ghanime, GE Global Research, Niskayuna, NY, University of Monterrey, San Pedro Garza García, NL, United States, Eugenio Del Puglia, Francesco Mexico Mastromatteo, GE Oil & Gas, Florence, Italy, Srinidhi 290: The Effect of Resin Foam/Rubber Thick- Sampath, GE Oil & Gas, Bangalore, India, Michele ness Ratio on Frictional Behavior of Shoe Sole Provenzale, GE Oil & Gas, Florence, Italy, Anand K, Material GE Energy, Bangalore, India, Marcin Trzcinski, GE Kenta Moriyasu, Tsuyoshi Nishiwaki, ASICS Oil & Gas, Warsaw, India, Filippo Cappuccini, GE Oil Corporation, Kobe, Japan, Kei Shibata, Takeshi & Gas, Florence, Italy Yamaguchi, Kazuo Hokkirigawa, Tohoku University, 968: Erosion Wear Performance of Borax Sendai, Japan Filled Glass Fiber Reinforced Epoxy Compos- 308: Wear Behavior and Self Tribofilm Forma- ites by Using the Taguchi Experimental De- tion of Infiltration-type TiC/FeCrWMoV sign Metal Ceramics Under Dry Sliding Mehmet Bagci, Selcuk University, Konya, Turkey Yanjun Wang, Ying Han, Liying Yang, Shouren 660: The Effect of a Coating-substrate System Wang, University of Jinan, Jinan, China, Zhenhong on the Pitting of Lubricated PVD Coated Ele- Yang, Fans Company of Jinan, Jinan, China ments 317: The Development of Adhesion Reduction Michał Michalak, Marek Kalbarczyk, Witold Method for Thermoplastic CFRP and Mould Piekoszewski, Marian Szczerek, Institute for Motoyuki Murashima, Noritsugu Umehara, Hiroyuki Sustainable Technologies – National Research Kousaka, Takayuki Tokoroyama, Nagoya University, Institute, Radom, Poland Nagoya, Japan 346: Three-body Abrasive Wear of WC-Co Composites Manufactured by Reactive Sinter- ing of Nanocrystalline Powders

35 Technical Sessions WTC 2013

Kristjan Juhani, Renee Joost, Jüri Priso, Sergei 475: Tribological Properties of Nanostruc- Letunovitš, Mart Viljus, Marek Tarraste, Tallinn tured C/C-SiC Composites University of Technology, Tallinn, Estonia Francisco M. Ramos, Mireia Blanes, Anna Amell, 358: Effect of the Surface Treatment of Francisco Albero S.A.U., L’Hospitalet de Llobregat, CaCO3 on the Tribological Properties of Spain, Joseba Esparza, Marta Martínez, José A. PA6/PP/CaCO3 Composites García, Rafael Rodríguez, Centro de Ingeniería de Yosuke Nishitani, Masanori Shitsukawa, Kazuki Superficies, Cordovilla­Pamplona, Spain, Luis A. Díaz, Yamamoto, Kogakuin University, Hachioji, Japan, Universidad de Oviedo, Llanera, Spain Takeshi Kitano, Tomas Bata University in Zlin, Zlin, 543: The Researches of Strain Hardening Czech Republic 30CrMnSiA Steel 361: Influence of Hardness of Polyamide 12 Mazhyn Skakov, Gulzhaz Uazyrkhanova, D. Elastomer on the Tribological Properties of Serikbaev East Kazakhstan State Technical the Polymer Blends of Polyamide 12 Elas- University, Ust­Kamenogorsk, Kazakhstan, Natalya tomer and Thermoplastic Polyurethane Elas- Popova, Tomsk State Architecture and Building tomer University, Tomsk, Russian Federation, Michael Noritada Naruse, Takashi Toba, Yosuke Nishitani, Scheffler, Otto von Guericke University, Magdeburg, Kogakuin University, Hachioji, Japan, Takeshi Kitano, Germany Tomas Bata University in Zlin, Zlin, Czech Republic 557: Tribological Properties of Multiphase Al- 362: Wear Properties of Reactive Sintered loys before and after Laser Treatment WC-TiC-Co Cemented Carbides During Dry Viktor Novytskyi, Vladimir Havryliuk, Vladimir Cutting of Carbon Steel Lakhnenko, National Academy of Sciences of Marek Tarraste, Kristjan Juhani, Jüri Pirso, Mart Ukraine, Kyiv, Ukraine Viljus, Sergei Letunovitš, Tallinn University of 562: The Influence of Hardness of the Steel Technology, Tallin, Estonia Sliding Surfaces on Their Tribological Charac- 363: Influence of Type of PTFE on the Tribo- teristics logical Properties of PTFE Filled Semi- Tadeusz Leśniewski, Wrocław University of Aromatic Polyamide (PA6T) Composites Technology, Wrocław, Poland Yuki Takenaka, Takeshi Miyaji, Yosuke Nishitani, 583: Compressor Airfoil Erosion Coating Kogakuin University, Hachioji, Japan, Takeshi Kitano, Robert W. Bruce, Aaron Gastrich, John Hanify, GE Tomas Bata University in Zlin, Zlin, Czech Republic Aviation, Cincinnati, OH, United States 369: Lubrication Properties of Copper Molyb- 642: Study of the Composite Layers Proper- date Powders under High Temperature Con- ties in the Abrasive Wear Resistance Condi- ditions tions Yoshinori Takeichi, Kentaro Minami, Toyohashi Ingrid Kovaříková, Beáta Šimeková, Erika Hodúlová, University of Technology, Toyohashi, Japan, Masahiro Kristián Šalgó, Pavel Blaškovitš, Slovak University of Kawamura, Kawamura Research Laboratory Co. Ltd, Technology in Bratislava, Trnava, Slovak Republic Meguro, Japan, Marian Dzimko, University of Žilina, 721: Tribology of PTFE-based Polymeric Ma- Žilina, Slovakia terials: Comparison between Pin-on-disc and 419: Friction and Wear Behavior of Rice Bran Sliding Tests Ceramics under Vacuum Environment Giulio Malucelli, Marco Actis Grande, Politecnico di Kei Shibata, Takeshi Yamaguchi, Kazuo Torino, Alessandria, Italy, Luigi Mazza, Roberto Hokkirigawa, Tohoku University, Sendai, Japan Grassi, Andrea Trivella, Politecnico di Torino, Torino, 421: Friction and Wear Behavior of Polyamide Italy 66 Composites Filled with Rice Bran Ceramics 723: Effect of Al2O3 Particle Size on Electrical Slid against Stainless Steel Wear Performance of Al2O3/Cu Composites Kei Shibata, Takeshi Yamaguchi, Ryota Ifuku, Moeko Kexing Song, Xiuhua Guo, Xiaofeng Xu, Yongzhen Kishi, Kazuo Hokkirigawa, Tohoku University, Zhang, Xi’an University of Technology, Xi’an, China Sendai, Japan 734: Scratch and WWear Characteristics of 422: Tribological Properties of PEEK Resin Polyamide Nanocomposites Filled with RB Ceramics Particles under Wa- Luca Andena, Natalia Castro Fajardo, Politecnico di ter Lubrication Milano, Milano, Italy, Francesco Manarini, Loredana Takeshi Yamaguchi, Jingeul Kim, Yohei Fujii, Kazuo Mercante, LATI Industria Termoplastici SpA, Vedano Hokkirigawa, Tohoku University, Sendai, Japan Olona, Italy, Andrea Pavan, Politecnico di Milano, 454: Bearing and Axial Seal Performances for Milano, Italy LH2 Turbopump of Rocket Engine 753: Tribological Performance of Forged Steel Satoshi Takada, Makoto Kojima, Masataka Kikuchi, and Cast Iron Crankshafts on Model Scale Takayuki Sudo, Tomoyuki Takano, Japanese Florian Summer, Florian Grün, Jürgen Schiffer, AeroSpace Technology, Kakuda, Japan István Gódor, Montanuniversität Leoben, Leoben,

36 WTC 2013 Technical Sessions

Austria, Ilias Papadimitriou, Georg Fischer Freiberg, Freiberg, Germany, Kathrin Harre, Automotive AG, Schaffhausen, Switzerland Hochschule für Technik und Wirtschaft Dresden, 830: Nanomechanical Properties of C-Pd films Dresden, Germany, Gert Heinrich, Technische Joanna Rymarczyk, Tele & Radio Research Institute, Universität Dresden, Dresden, Germany Warsaw, Poland, Łukasz Kołodziejczyk, Łódź 1046: High Temperature Friction Response of University of Technology, Łódź, Poland, Elżbieta PECS TiB2-B4C Composite Czerwosz, Tele & Radio Research Institute, Warsaw, Yeczain Perez Delgado, Mariana Staia, Sergei Poland Glavatskih, Koenraad Bonny, Ghent University, Gent, 860: Effects of Cr Content of Steels on Impact Belgium, Oliver Malek, Bert Lauwers, Jozef Vleugels, Fretting Wear in High Temperature Pure Wa- Catholic University of Leuven, Leuven, Belgium, ter Patrick De Baets, Ghent University, Gent, Belgium Yoshiki Sato, Akira Iwabuchi, Michimasa Uchidate, 1083: Contact Behavior of the Hard Thin Ce- Hitoshi Yashiro, Iwate University, Morioka, Japan ramic Coatings under Cyclic Loading 863: Influence of Friction Parameters on the Fjodor Sergejev, Liina Lind, Maksim Antonov, Priidu Mechanical Properties of Surface Layer of Peetsalu, Eron Adoberg, Tallinn University of Some Polymers Technology, Tallinn, Estonia Wojciech Wieleba, Anna Dobrowolska, Piotr 1098: Mechanical Conditions and Infuence of Kowalewski, Anita Ptak, Wrocław University of Oxidation on White Etching Layers Formation Technology, Wrocław, Poland Sarah Zitouni, Aurélien Saulot, Samuel Simon, 868: Friction and Wear Behaviour of Graphite Fabrice Ville, Jerôme Cavoret, INSA­Lyon, Filled Polymer Composites in Hydrogen Envi- Villeurbanne, France, Xavier Quost, Régie Autonome ronment des Transports Parisiens, Fontenay­Sous­Bois, Géraldine Theiler, Thomas Gradt, BAM ‐ Federal France, Yves Berthier, INSA­Lyon, Villeurbanne, Institute for Materials Research and Testing, Berlin, France Germany 1104: Influence of Chemical Composition on 902: Friction and Wear Characteristics of Ad- Friction Behavior of Polymeric Films: Correla- vanced Ceramic Materials tion with Adhesion and Deformability Yeczain Perez Delgado, Mariana Staia, Sergei Adeline Blaise, Céline Picard, Michel Grisel, Glavatskih, Koenraad Bonny, Ghent University, Université du Havre, Le Havre, France Ghent, Belgium, Olivier Malek, Bert Lauwers, Jozef 1128: Tribological Comparative Analysis of Vleugels, Catholic University of Leuven, Leuven, Abrasive Wear between New and Aged Inter- Belgium, Patrick De Baets, Ghent University, Ghent, nal HDPE Liners in Crude Oil Pipelines Belgium Juliana R. de Souza, Nayane Carla M. C. de Sá Leitão, 922: Multi-pass Sub-critical Load Testing of Jarbas S. Medeiros, João M. Sabino, João T. N. de Amorphous Polymeric Surfaces Medeiros, University of Rio Grande do Norte, Natal, Hervé Pelletier, Damien Favier, Leandro Jacomine, Brazil Christian Gauthier, Institut Charles Sadron, 1190: Influence of Deposition Parameters of Strasbourg, France TiO2 Sprayed Films on the Abrasive Wear Re- 955: Influence of Cobalt and Niobium to the sistance Abrasive Wear Characteristics of Multi- Mara Kandeva, Technical University­Sofia, Sofia, component Cast Iron. Bulgaria, Vladimir Blaskov, Irina Stambolova, Hiroya Hara, Kazumichi Shimizu, Kenta Kusumoto, Bulgarian Academy of Sciences, Sofia, Bulgaria, Muroran institute of technology, Muroran, Japan, Konstantin T. Balashev, Sofia University, Sofia, Masahito Tanaka, Sankyo Alloy Casting Co. Ltd, Bulgaria, Nina Kostova, Bulgarian Academy of Osaka, Japan, Jun Ito, R&E Inc., Noboribetsu, Japan, Sciences, Sofia, Bulgaria Vasily Iefremenko, Pryazovskyi State Technical 1224: Phase, Microstructure, Mechanical and University, Mariupol, Ukraine Wear Characteristics of Sintered Rocks Pow- 993: Wear Modes of Resin Materials in Micro ders Scale Abrasion Test Jadna Catafesta, Universidade de Caxias do Sul, Bom Takumi Matsuda, Tohoku University, Sendai, Japan, Princípio, Brazil, María C. Moré Farias, Robinson C. Kenichi Sugiyama, Hiroshi Yakuwa, Ebara Dudley Cruz, Universidade de Caxias do Sul, Caxias corporation, Honfujisawa, Japan, Koshi Adachi, do Sul, RS, Brazil Tohoku University, Sendai, Japan 1231: Effect of Yttria Addition on Mechanical 1003: Measurement of Friction Behaviour of and Tribological Properties of Plasma Ni- Modified NBR and CR Rubbers trided Sintered AISI 316L Jens Klose, Hochschule für Technik und Wirtschaft Michell F. Cano Ordoñez, Israel Krindges, César Dresden, Dresden, Germany, Ringo Nepp, Matthias Aguzzoli, Israel J. Rabin Baumvol, Carlos A. Kröger, Technische Universität Bergakademie Figueroa, María C. Moré Farias, Universidade de Caxias do Sul, Caxias do Sul, RS, Brazil

37 Technical Sessions WTC 2013 1269: Tribological Behavior of Spheroidal Thursday, September 12TH Graphite Cast Irons with Nanoadditives Julieta Kaleicheva, Valentin Mishev, Technical University of Sofia, Sofia, Bulgaria, Georgi Avdeev, BT - Biotribology Zdravka Karaguiozova, Bulgarian Academy of Sciences, Sofia, Bulgaria, Mara Kandeva, Technical TH1-BT9 Tactile Tribology I University of Sofia, Sofia, Bulgaria Room 2 8:30 – 10:30 1277: Friction of Thin Multi-component Oxide 335: Non-uniform Contact Behaviour of Hu- Films: Experiments and Modeling man Skin in Contact with Micro-Textured Pil- Alexey Useinov, Konstantin Kravchuk, Technological lar Surfaces Institute for Superhard and Novel Carbon Materials, Sheng Zhang, Marc Masen, Emile Van der Heide, Troitsk, Russian Federation, Elena Torskaya, Alexey University of Twente, Enschede, Netherlands Mezrin, Russian Academy of Sciences, Moscow, Russian Federation 1206: Preliminary Study of the Mechanical Properties and Frictional Response of Dam- JM – Joint Mechanics aged Skin after Regeneration Joanna Furgala, Wrocław University of Technology, WE4-JM1 Passive and Active Frictional Wrocław, Poland, Jolanta Baranowska, West Joints Pomeranian University of Technology, Szczecin, Poland Room 8 16:10 – 17:30 519: Tactile Friction of Topical Formulations 1165: Contact Mechanics of Frictional Lap Lisa Skedung, Lovisa Ringstad, SP Technical Joint Research Institute of Sweden AB, Stockholm, Sweden, Anothai Thaitirarot, David Hills, University of Izabela Buraczewska‐Norin, KTH Royal Institute of Oxford, Oxford, United Kingdom, Daniele Dini, Technology, Stockholm, Sweden, Mark Rutland, ACO Imperial College London, London, United Kingdom HUD Nordic AB, Upplands Väsby, Sweden 34: Measurement and Modelling of Interface 1272: Haptic Tribology with Human Finger Stiffness in Frictional Contacts Hassan Zahouani, Mehdi Djaghloul, Roberto David Nowell, Daniel Mulvihill, University of Oxford, Vargiolu, ENISE ­ École Centrale de Lyon, Saint­ Oxford, United Kingdom, Henry Brunskill, University Etienne, France of Sheffield, Sheffield, United Kingdom, Mehmet Kartal, University of Oxford, Oxford, United Kingdom, 692: Tactile Device for Textile Fabrics Simula- Rob Dwyer‐Joyce, University of Sheffield, Sheffield, tion and Tactile Perception Study United Kingdom Marie‐Ange Bueno, University of Haute Alsace, Mulhouse, France, Frédéric Giraud, Michel Amberg, 669: Assessment on Control Strategies of Betty Lemaire‐Semail, Université Lille 1, Villeneuve Friction Dampers ’ Marcelo Braga dos Santos, Francisco P. Lepore Neto, d Ascq, France Federal University of Uberlândia, Uberlândia, Brazil 1187: Parameters Influencing the Friction of 3: Semi-active Control of Structures Assem- In Vivo Human Skin bled by Bolted Joints Marc A. Masen, Noor K. Veijgen, T. Wolda, Emile van Lothar Gaul, University of Stuttgart, Stuttgart, der Heide, University of Twente, Enschede, Germany, Jens Becker, Moog GmbH, Böblingen, Netherlands Germany TH2-BT10 Tactile Tribology II Room 2 11:00 – 13:00 410: On the Probability of Skin Damage due to Frictional Heating in Real Asperity Contacts Emile van der Heide, Marc Masen, Sheng Zhang, Julien van Kuilenburg, University of Twente, Enschede, Netherlands, Edwin Gelinck, TNO, Netherlands 826: Friction of Various Polymer Textures against Skin-like Materials Matthew A. Darden, Christian J. Schwartz, Iowa State University, Ames, IA, United States 1167: Dynamic Modelling of Finger-surface Contacts Ramona Fagiani, Università degli studi di Parma, Parma, Italy, Marco Barbieri, Università di Modena e Reggio Emilia, Modena, Italy

38 WTC 2013 Technical Sessions

582: Tribology, Texture and Touch Lorenzo Moroni, Emile van der Heide, University of Lisa Skedung, Mark W. Rutland, SP Technical Twente, Enschede, Netherlands Research Institute of Sweden, Stockholm, Sweden, 1075: Traction Loading on Tissue Surface Martin Arvidsson, Birgitta Berglund, Stockholm Stimulate Cartilage Tissue Development by University, Stockholm, Sweden, Jun Chung Young, Cultured Chondrocytes Christopher M. Stafford, National Institute of Yoshinori Sawae, Keisuke Fukuda, Seiji Omata, Standards and Technology, Gaithersburg, MD, United Kyushu University, Fukuoka, Japan States 1112: Adsorption of Synovial Fluid Proteins on 1238: Tribological Approach of the Contact Biomaterials for Permanent Meniscus Re- Human Skin Synthetic Fabric placement and their Bio-lubrication Jérômre Cavoret, Benyebka Bou‐Saïd, Fabrice Ville, Sara Ehsani Majd, Roel Kuijer, University of INSA­Lyon, Villeurbanne, France Groningen, Groningen, Netherlands, Tannin Schmidt, University of Calgary, Calgary, Canada, Prashant K. TH3-BT11 Hydrogels Sharma, University of Groningen, Groningen, Room 2 14:00 – 16:00 Netherlands 908 – Keynote: Squishy Physics and Slippery 1255: Friction of Medical Materials on PVA Hydrogels Hydrogel in Physiological Lubrication Alison C. Dunn, Juan M. Urueña, Thomas E. Angelini, Hiroyuki Kosukegawa, Vincent Fridrici, W. Gregory Sawyer, University of Florida, Gainesville, Emmanuelle Laurenceau, École Centrale de Lyon, FL, United States Écully, France, Makoto Ohta, Tohoku University, 313: Effect of Synovial Fluid Constituents on Sendai, Japan, Philippe Kapsa, École Centrale de Tribological Performance of Artificial Hydro- Lyon, Écully, France gel Cartilage Material 286: Superior Lubricity in Articular Cartilage Seido Yarimitsu, Kazuhiro Nakashima, Yoshinori and Artificial Hydrogel Cartilage Sawae, Teruo Murakami, Kyushu University, Teruo Murakami, Seido Yarimitsu, Kazuhiro Fukuoka, Japan Nakashima, Tetsuo Yamaguchi, Yoshinori Sawae, 428: Elution and Wear of PVA Hydrogels by Nobuo Sakai, Atsushi Suzuki, Kyushu University, Reciprocating Friction Fukuoka, Japan Atsushi Suzuki, Saori Sasaki, Syouhei Sasaki, Taegu 150: Nanomechnical Characterization of Bio- Noh, Yokohama National University, Yokohama, logical Surfaces Using Combination of Japan, Kazuhiro Nakashima, Seido Yarimitsu, Teruo Nanotribology and Instrumented Indentation Murakami, Kyushu University, Fukuoka, Japan Jiri Nohava, Fanny Ecarla, CSM Instruments, Peseux, 596: Effects of Bulk Transport on Surface Fric- Switzerland, Gilles Weder, CSEM, Neuchâtel, tion of Hydrogels Switzerland Tetsuo Yamaguchi, Teruo Murakami, Kyushu 1323: Ultralow Friction of Soft Matters and University, Fukuoka, Japan Antibiofouling Application 1273: Mechanical and Frictional properties of Feng Zhou, Chinese Academy of Science, Lanzhou, Laminated Alpha-TCP filled Polyvinyl Alcohol China Hydrogel Tomoaki Iwai, Kanae Yamamoto, Keisuke Asahara, ST – Surface Tribology Yutaka Shoukaku, Kanazawa University, Kanazawa, Japan TH1-ST18 Contact Mechanics 5 66: Effecte of Irradiation Dose on Mechanical Room 3 8:30 – 10:30 Properties of PVA/PVP Hydrogels as Articu- 390: Multi-Body Contact Problem for a Non- lar Cartilage homogeneous Elastic Coated Foundation with Dangsheng Xiong, Yan Shi, Jinfeng Zhang, Nanjing Wear University of Science and Technology, Nanjing, China Alexander V. Manzhirov, Russian Acadmy of Sciences, Moscow, Russian Federation TH4-BT12 Hydrogels, Scaffolds and Soft 684: Mechanothermodynamic Analysis of Contacts Volumetric Damage in Complex Systems with Room 2 16:30 – 18:50 Contact Interaction 585: The Effect of Material, Structure and Cell Leonid A. Sosnovskiy, Interdepartmental Laboratory Culture on the Tribological Performance of “TRIBO­FATIGUE”, Gomel, Belarus, Michael M. 3D Porous Scaffold for Functional Tissue Re- Khonsari, Louisiana State University, Baton Rouge, generation LA, United States, Sergei S. Sherbakov, Belarusian Xiangqiong Zeng, Wim Hendrikson, Jincan Yan, State University, Minsk, Belarus Jeroen Rouwkema, Clemens van Blitterswijk,

39 Technical Sessions WTC 2013

757: Predictions of the Average Surface Sepa- 836: A Combination Effect of Laser Surface ration and Stiffness between Contacting Elas- Texturing and Solid Lubricant Film on Tribo- tic and Elastic-Plastic Sinusoidal Surfaces logical Properties by Multi-Dimple Pattern Amir Rostami, Robert L. Jackson, Auburn University, Dawit Z. Segu, Kyungpook National University, Auburn, United States Daegu, Republic of Korea, Jong‐Hyoung Kim, Korea 881: Microstructure and Linear Scratch Test Institute of Industrial Technology, Daegu, Republic of of Low Temperature Plasma Nitrided Stain- Korea, Si Geun Choi, Yong‐Sub Jung, Seock‐Sam Kim, less Steels Kyungpook National University, Daegu, Republic of Luis A. Espitia Sanjuán, Luis Varela, Gabriela Korea Tieppo, University of São Paulo, São Paulo, SP, Brazil, 1146: Surface Modification of Hard PVD Coat- Carlos Pinedo, Heat Tech Technology for Heat ings by Laser Texturing to Increase the Sliding Treatment and Surface Engineering Ltd, Mogi das Wear Resistance Cruzes, SP, Brazil, Mario Bocalini, São Paulo Daniele Ugues, Politecnico di Torino, Torino, Italy, Technological Research Institute, São Paulo, SP, Nora Lecis, Ali G. Demir, Barbara Previtali, Brazil, André P. Tschiptschin, University of São Politecnico di Milano, Milano, Italy Paulo, São Paulo, SP, Brazil 1066: Smoothed Particle Applied Mechanics TH2-ST20 Coatings 7 (SPAM) in Tribology: Simulating a Scratch Room 3 11:00 – 13:00 Test 165: Mechanical and Tribological Behaviour of Severin Nugent, Armin Fischer, Sotiraq Ilo, Georg Thin Ceramic Coatings Deposited on PET and Vorlaufer, AC2T Research GmbH, Wiener Neustadt, PEN Substrates Austria Abdul Shah, Nathalie Renevier, Ian Sherrington, 1162: Sliding Contact Problems Involving University of Central Lancashire, Preston, United Multi-layered Elastic Materials Kingdom, David Wickens, Manchester Metropolitan Stewart Chidlow, Oxford Brookes University, Oxford, University, Manchester, United Kingdom, Peter Kelly, United Kingdom, Nick Cramer, Mircea Teodorescu, Manchester Metropolitan University, Manchester, University of California ­ Santa Cruz, Santa Cruz, CA, United Kingdom United States 1295: Comparative Analysis of the Tribologi- cal Bbehaviour of HVOF- and HVAF-sprayed TH1-ST19 Texturing 1 Cermet Coatings Room 4 8:30 – 10:30 Lutz‐Michael Berger, Fraunhofer­Institut für 13: Static and Dynamic Wettability of Multis- Werkstoff­ und Strahltechnik (IWS), Dresden, caled Surfaces Processed with Femtosecond Germany, Giovanni Bolelli, Tim Börner, Università Laser degli Studi di Modena e Reggio Emilia, Modena, Italy, Stéphane Valette, Pavel Bizi‐Bandoki, École Centrale Heli Koivuluoto, Tampere University of Technology, de Lyon, Écully, France, C. Mauclair, Université Jean Tampere, Finland, Luca Lusvarghi, Università degli Monnet, Saint­Etienne, France, Stéphane Benayoun, Studi di Modena e Reggio Emilia, Modena, Italy, École Centrale de Lyon, Écully, France Christophe Lyphout, Nicolaie Markocsan, Per Nylén, University West, Trollhättan, Sweden, Petri Vuoristo, 84: Macro-surface Modification through Ex- Tampere University of Technology, Tampere, Finland, ploitation of Rivets and Dimples - Numerical S. Zimmermann, H.C. Starck GmbH, Laufenburg, and Experimental Germany Mohd Danial Ibrahim, Mohd Shahril Osman, Universiti Malaysia Sarawak, Kota Samarahan, 547: Tribology Behavior under Different Malaysia, Norifumi Miyanaga, Waseda University, Working Conditions and Friction Heat Effect Shinjuku­ku, Japan, Amir Azam Khan, Universiti on Abradability of Abradable Seal Coating Malaysia Sarawak, Kota Samarahan, Malaysia Shu Li, Deli Duan, Siyang Gao, Chinese Academy of Sciences, Shenyang, China 883: Optical Characterisation of Polished Steel Surfaces 981: Effectiveness of Hard Coatings for Vac- M. L. Miranda‐Medina, Peter Somkuti, Bern Steiger, uum Lubrication by Space Liquid Lubricants AC2T Research GmbH, Wiener Neustadt, Austria, D. Masanori Iwaki, Japan Aerospace Exploration Bader, Berndorf Band GmbH, Berndorf, Austria, Agency, Tsukuba, Japan, Takanori Takeno, Hiroyuki Martin Jech, András Vernes, AC2T Research GmbH, Miki, Toshiyuki Takagi, Tohoku University, Sendai, Wiener Neustadt, Austria, Kurt Hingerl, Johannes Japan Kepler University Linz, Linz, Austria 1207: Tribological Behaviour of Ferrous-based 793: Laser Surface Texturing: the Effect of APS Coatings under Dry Sliding Conditions Dimple Diameter and Oil Viscosity Aleksandar Vencl, University of Belgrade, Belgrade, Daniel Braun, Christian Greiner, Johannes Serbia Schneider, Karlsruhe Institute of Technology, 499: Study on the Residual Stress of Si Doped Karlsruhe, Germany CNx Films

40 WTC 2013 Technical Sessions

Tianmin Shao, Shiyu Hu, Xiao Huang, Hui Wang, 1029: Study on Anti-Micropitting Protective Tsinghua University, Beijing, China Mechanisms of Black Oxide Coating Victor Brizmer, Andriy Rychahivskyy, Bo Han, SKF TH2-ST21 Texturing 2 Engineering & Research Centre, Nieuwegein, Room 4 11:00 – 13:00 Netherlands 35: Measurement of Lubricant Film Thickness 1080: PVD Refractory Metal Bbased Coatings in a Gearbox Journal Bearing with Ultrasonic for Tribological Applications Reflection Silvia M. Deambrosis, Enrico Miorin, Francesco Hiroyuki Suzuki, Matt Marshall, Rob Dwyer‐Joyce, Montagner, Valentina Zin, CNR­Institute for University of Sheffield, Sheffield, United Kingdom Energetics and Interphases, Padova, Italy, Marco Sebastiani, University "Roma Tre", Roma, Italy, D. 37: Starved Lubrication of Textured Surfaces Dellasega, M. Passoni, Politecnico di Milano, Milano, Henara L. Costa, Universidade Federal de Uberlândia, Italy, Edoardo Bemporad, University "Roma Tre", Uberlândia, MG, Brazil Roma, Italy, Monica Fabrizio, CNR­Institute for 118: A Homogenization Method of Modeling Energetics and Interphases, Padova, Italy Surface Texturing Effect in Full Film Lubrica- 1200: The Effect of Applied Aoad on Tribo- tion Shiyuan Pei, Lin Wang, Hua Xu, Xi’an Jiaotong logical Behaviour of PVD-CrN Coatings Candida Petrogalli, Lorenzo Montesano, Marcello Univerisity, Xi’an, China Gelfi, Giovina M. La Vecchia, University of Brescia, 423: Improvement of Ffriction Characteristics Brescia, Italy, Paolo Colombi, CSMT Gestione S.c.a.r.l., on Reciprocating Machinery by Surface Tex- Brescia, Italy turing Masaki Oda, Katsumi Iwamoto, Kentaro Tanaka, TH3-ST23 Texturing 3 Tokyo University of Marine Science and Technology, Room 4 14:00 – 16:00 Tokyo, Japan, Toshikazu Fujino, Nagaoka University of Technology, Nagaoka, Japan 191: Investigation on the Load Carrying Ca- pacity of Textured Surface Based on Interfer- 530: Effect of Brush Structure on Friction un- ometry Measurements der Water Lubrication Enyang Zhang, Bo Zhang, Wei Huang, Xiaolei Wang, Shingo Kawara, Noritsugu Umehara, Takayuki Nanjing University of Aeronautics & Astronautics, Tokoroyama, Nagoya University, Nagoya, Japan, Nanjing, China Masahiro Suzuki, Toshiyuki Saito, JTEKT Corporation, Kashiwara, Japan 258: Numerical Analysis of Global and Local Effects of Textures on the Hydrodynamic Per- 420: Friction and Wear Behavior of Textured formance of a Mechanical Seal Cu alloy under Dry and Oil-lubricated Condi- Mohand Adjemout, Noël Brunetière, Jean Bouyer, tions CNRS­Université de Poitiers, Chasseneuil, France Auezhan Amanov, Tokyo University of Science, Tokyo, Japan, Jun Hyong Kim, Young Sik Pyun, Sun 638: CFD Investigation of Influence of Surface Moon University, Asan, Republic of Korea, Shinya Texturing on the Wedge Effect Sasaki, Tokyo University of Science, Tokyo, Japan Yasutsugu Oshima, Akira Nakano, Ryo Tsuboi, Shinya Sasaki, Tokyo University of Science, Tokyo, TH3-ST22 Coatings 8 Japan Room 3 14:00 – 16:00 810: Improving Piston-liner Performance thru Surface Texturation: Coupling Measurement 56: On the Weakening Effect in a Spherical and Theoretical Study to Optimize Friction Contact with Thin Hard Coatings and Oil Consumption R. Goltsberg, I. Etsion, Technion, Haifa, Israel Pierre Charles, Gabriel Cavallaro, PSA Peugeot 666: Effect of Substrate Surface Fin- Citroën, La Garenne­Colombes, France ish/Coating Architecture on the Sliding Wear 873: Investigation of Tribological Properties of Multi-layered/Gradient NCrAlSi Coatings and Vortex Structures in the Texture by using Silviu Victor, Carlos A.S. de Oliveira, Universidade Computational Fluid Dynamics Federal de Santa Catarina, Florianópolis, Brazil, Ryo Tsuboi, Yasutsugu Oshima, Akira Nakano, Mario M. de Oliveira, Jose D. Biasoli de Mello, Shinya Sasaki, Tokyo University of Science, Tokyo, Universidade Federal de Uberlândia, Uberlândia, Japan Brazil 1159: A Numerical and Experimental Ap- 885: Smart Coatings and Green Tribology proach in Understanding the Performance of Emilia Assenova, Society of Bulgarian Tribologists, Textured Surfaces in Sliding Contacts Sofia, Bulgaria, Gottlieb Polzer, Tribology Unit, Nicholas J. Morris, Miguel De La Cruz, Ramin Schönfels, Germany, Dr. Tsermaa, University of Ulan Rahmani, Michael Leighton, Homer Rahnejat, Paul Bator, Ulan Bator, Mongolia, Mara Kandeva, Technical University ­ Sofia, Sofia, Bulgaria

41 Technical Sessions WTC 2013

King, Loughborough University, Loughborough, 780: Optimizing Roughness and Stress United Kingdom Through Isotropic Finishing and Controlled Shot Peening of Surfaces TH4-ST24 Surface Analysis Alessandro Zanini, Metal Improvement Company, Room 3 16:30 – 18:50 Piacenza, Italy 14: Micro-Tribological Characterization of PS3-ST Posters Coated Paper, Influence of Nano Sized Parti- cles Atrium 8:30 – 16:30 Hermann Schmid, PTS Munich, Munich, Germany, 75: Nitriding of AISI 4140 Steel by EDM Wolfgang P. Weinhold, Innowep GmbH, Wurzburg, Rogério F. Santos, Ernane R. Silva, Henara L. Costa, Germany André R. F. Oliveira, Alberto A. Raslan, Universidade 444: Directional Fractal Signature and Optimi- Federal de Uberlândia, Uberlândia, MG, Brazil zation of Surface Textures 167: Choice of Fractal Surface Synthesis Algo- Pawel Podsiadlo, Gwidon Stachowiak, Curtin rithm University, Perth, Australia Chao Zhou, Chenghui Gao, Fuzhou University, 445: Numerical Characterization of AFM Im- Fuzhou, China ages of Self-structured Surface Textures 218: Tribological Behavior of AISI H13 Steel Marcin Wolski, Pawel Podsiadlo, Gwidon W. Subjected to Boriding Thermochemical Stachowiak, Curtin University, Perth, Australia Treatment 953: Reduced Description of Three- Anael Preman Krelling, Julio César Giubilei Milan, dimensional Measured Surface Texture César Edil da Costa, State University of Santa Hagen Lind, Hendrik Kues, Tim Linke, Leibniz Catarina, Joinville, SC, Brazil Universität Hannover, Hannover, Germany, Frank 232: Function-based Geometrical 3D Surface Schmerwitz, Burkhard Wies, Continental Reifen Characterization Deutschland GmbH, Hannover, Germany Saskia Schiefer, Marco Gerlach, Sophie Gröger, 1271: Relaxation of Surface Tension of Aque- Technische Universität Chemnitz, Chemnitz, Germany ous Solutions by Humidification of the Gas 275: Experimental Simulation of Grid-to-Rod Phase Fretting in a Single Nuclear Fuel Rod Marco A. Álvarez‐Valenzuela, Sergio Jiménez‐López, Young‐Ho Lee, Hyung‐Kyu Kim, Kang‐Hee Lee, Juan Sanchez Garcia Casarrubios, Efren Diez‐ Heung‐Seok Kang, Korea Atomic Energy Research Jimenez, Ignacio Valiente‐Blanco, Cristian Cristache, Institute, Daejeon, Republic Of Korea José L. Pérez Díaz, Universidad Carlos III de Madrid, 287: Effect of Slurry Conditions on Perform- Leganes, Spain ance and Abrasive Erosion of Non-clogging Centrifugal Pump Impeller TH4-ST25 Surface Treatments 2 Jeong‐Eui Yun, Joo‐Ho Kim, Kangwon National Room 4 16:30 – 18:50 University, Samcheok, Republic Of Korea 43: Combined Modeling and Experimental 311: Soft-chemo Mechanical Surface Tribology Studies of Interacting Polymer Brushes under Wolfgang P. Weinhold, Innowep GmbH, Würzburg, Shear Germany, Ralph Stengler, University of Applied Manjesh Kumar Singh, Patrick Ilg, Rosa M. Sciences, Darmstadt, Germany, Helen Wang, AMT Espinosa‐Marzal, Martin Kröger, Nicholas D. Advanced Material Technology Inc., Bejing, China, M. Spencer, ETH, Zurich, Switzerland Nuss, University of Würzburg, Würzburg, Germany 211: Evaluation of Strategies in Finishing Cyl- 316: Micromechanical and Microtribological inder Running Surfaces Surface Analysis of Wind Turbine Blades Bernhard Karpuschewski, Florian Welzel, coated with Nanoparticles Konstantin Risse, University of Magdeburg, Wolfgang P. Weinhold, Innowep GmbH, Würzburg, Magdeburg, Germany, Andrea Mura, Politecnico di Germany, Ralph Stengler, University of Applied Torino, Torino, Italy Sciences, Darmstadt, Germany, Helen Wang, AMT 334: Tribological Behaviour of Plasma-treated Advanced Material Technology Inc., Bejing, China, M. PPS Composites with Water Lubrication Nuss, University of Würzburg, Würzburg, Germany Masaaki Yamane, Kumiko Yoshihisa, IHI 319: The Impact of Slider Surface Roughness Corporation, Yokohama, Japan on the Touchdown-Takeoff Hysteresis Phe- 446: Effects of Bamboo Fiber Modifications on nomenon the Tribological Performance of their Rein- Ramida Vithoonsaritsilp, George L. Best, Western forced Brake Composites Digital (Thailand) Co., Bangpa­in, Thailand, Joydeep Fushan He, Chenghui Gao, Kaikui Zheng, Youxi Lin, Dutta, Asian Institue of Technology, Klong Luang, Fuzhou University, Fuzhou, China Thailand

42 WTC 2013 Technical Sessions

402: The Effect of the TiN and CrN Interlay- Sulkhan Iashvili, Slava Mebonia, Maia Iadze, A. ers on the Tribological Behavior of DLC Coat- Suladze, Ts. Iashvili, Institute of Machine Mechanic, ings Tbilisi, Georgia Monika Madej, Kielce University of Technology, 870: Investigation of the Effects of a Micro Kielce, Poland Texturing on the Hydrodynamic Lubrication 404: Stress-Strain State and Damage of the Bora Lee, Suk Man Moon, Yong Joo Cho, Pusan Mutielement System with Complex Contact National University, Busan, Republic of Korea Interactions between its Elements 914: Correlation between the State of the Sergei Sherbakov, Belarusian State University, Metal-polymer Surface and the Friction Pa- Minsk, Belarus, Leonid Sosnovskiy, rameters in (-50 ÷ 0) °C Temperature Range Interdepartmental Laboratory “TRIBO­FATIGUE”, Anita Ptak, Wojciech Wieleba, Wrocław University of Gomel, Belarus Technology, Wrocław, Poland 462: Synergistic Roles of Benzotriazole and 920: Influence of Weather Factors on Seasonal Sodium Dodecyl Sulfonate in CMP of Copper Frictional Possibilities of Coupling of Wheels at a Reduced Down Pressure with Rails and Economic Estimations of Rail- Guoshun Pan, Hua Gong, Zhonghua Gu, Tsinghua way Transport Work University, Beijing, China Yury Luzhnov, Al Russia Railway Research Institute, 486: Friction and Wear Properties by Laser- Moscow, Russian Federation, Alina Romanova, State textured Piston-ring Surfaces University of Railway Transport, Moscow, Russian Yali Zhang, Xiaogang Zhang, Jiaoyi Wu, Tonghai Wu, Federation You‐Bai Xie, Xi’an Jiaotong University, Xi’an, China 921: Abrasive Wear Resistance of Multi- 535: Comparative Tribological Behavior be- layered/Gradient NCrAlSi PVD Coatings tween Stainless Steels AISI 316L W.M. da Silva, V. C. Teles, Universidade Federal de Mamoun Fellah, Mohammed Labaïz, Omar Assala, Uberlândia, Uberlândia, Brazil, S. Victor, C.A.S. de Badji Mokhtar University, Annaba, Algeria, Alain Oliveira, Universidade Federal de Santa Catarina, Iost, Laboratory of metallurgy and materials science Florianópolis, Brazil, J.D.B. de Mello, Universidade ENSAM, Lille, France Federal de Uberlândia, Uberlândia, Brazil 615: Surface Texturing by Making Use of Mi- 964: Contact Stress Induced Micromagnetic croploughing Behavior in Magnetic Recording Disk Jun Shimizu, Takeyuki Yamamoto, Libo Zhou, Lei Yang, Dongfeng Diao, Meiling Guo, Xi’an Jiaotong Teppei Onuki, Hirotaka Ojima, Ibaraki University, University, Xi’an, China Hitachi, Japan 978: Study on Rough Surface Contact Using a 617: Chemical Mechanical Polishing (CMP) of Direct Simulation with Computer Generated SiC Wafer Utilizing Catalyst in Slurry Surfaces Yan Zhou, Guoshun Pan, Guihai Luo, Xiaolei Shi, Michimasa Uchidate, Akira Iwabuchi, Tomoharu Chunli Zou, Tsinghua University in Shenzhen, Shimiu, Iwate University, Morioka, Japan Shenzhen, China, Yuhong Liu, Tsinghua University, 990: Scale Effect on Adhesion of Textured Beijing, China Elastomeric Surfaces 653: Effect of post Oxidation Treatment on Valentin Hisler, Université de Strasbourg, Wear Resistance of Nitrided Plain Carbon Strasbourg, France, Marie Palmieri, Université de Steels Haute Alsace, Mulhouse, France, Vincent Le Davide Mombelli, Nora Lecis, Politecnico di Milano, Houérou, Christian Gauthier, Université de Milano, Italy, Gianluca Mancuso, Colmegna S.p.A, Strasbourg, Strasbourg, France, Michel Nardin, Siziano (PV), Italy Marie‐France Vallat, Laurent Vonna, Université de 656: Fracture of Minerals under Controlled Haute Alsace, Mulhouse, France Environment for a Better Understanding of 1085: Complex Wear Measurement on Thin Dry Grinding PVD Coatings Using a Novel Tribometer Clotilde Minfray, Sandrine Bec, Anton Rusanov, Cesare Di Cesare, Luca Bosio, Marco Bacchereti, Matthieu Guibert, Thierry Le Mogne, École Centrale Massimiliano Cecconi, Scienzia Machinale Srl, de Lyon, Écully, France Navacchio di Cascina (PI), Italy, Vincenzo Mangione, 712: Microtopographic Features of Worn Sur- Edoardo Bemporad, University of Rome “Roma 3”, faces Roma, Italy Árpád Czifra, Béla Palásti Kovács, Óbuda University, 1094: Lubrication Condition Prediction of La- Budapest, Hungary ser Surface Textured Rotary Seal Rings 856: Working and Application of the Com- Yimin Zhao, Chao Wei, Jibin Hu, Shihua Yuan, Beijing bined, non-polluting Methods of a Covering- Institute of Technology, Beijing, China greasing 1122: Friction on Ice: Influence of Surface To- pography

43 Technical Sessions WTC 2013

Alberto Spagni, Enrico Gualtieri, Antonio FW – Dry Friction and Wear Ballestrazzi, Alberto Rota, Sergio Valeri, Università di Modena e Reggio Emilia, Modena, Italy TH1-FW10 Experiment, equipment, test 1170: Cavitation Erosion Behavior of CrN and methods 1 AlCrN Coatings Deposited on 34 CrAlNi 7 Room 5 8:30 – 10:30 Plasma Nitrided Steel 54 – Keynote: Ranking of Particulate Abrasiv- Flávio J. da Silva, Federal University of Espírito Santo, ity Vitória, Brazil, Sinésio D. Franco, Federal University Kenneth G. Budinski, Bud Labs, Rochester, NY, of Uberlândia, Uberlândia, Brazil United States 1177: Experimental Topological Analysis 1261: Impact-sliding Wear Characteristics of Simulating a Wall of the Internal Surface of ° Pipelines by Mechanical Profilometry Nitrided Stainless Steel at 400 C Christiano J. Menezes da Costa, Jarbas Santos de Junichi Yoshihisa, IHI corporation, Yokohama, Japan, Medeiros, Alysson A. Santos da Silva, João T. Jean‐Christophe Abry, Gaeton Bouvard, Philippe Nóbrega de Medeiros, João M. Sabino, Federal Kapsa, Ecole Central de Lyon, Écully, France University of Rio Grande do Norte, Natal, Brazil, 1308: Wear Mechanisms in Polyoxymethylene Claudio S. Camerini, Centro de Pesquisa da Petrobrás (POM) Spur Gears – Petróleo Brasileiro S.A., Brazil Mike Evans, Sam Akehurst, Patrick Keogh, 1185: Corrosive-Cavitative-Erosive Wear of a University of Bath, Bath, United Kingdom Carbon Steel in Aqueous Medium with Salt 95: Dynamic Friction Measurement and Mod- (NaCl), CO2 and Solid Particulates (SiO2) elling - A Review Fractions Shuwen Wang, Zhenning Yang, Kang Chen, Rutao Fernando Nunes da Silva, Jardel Dantas da Cunha, Zhao, Houqi Liu, Harbin Institute of Technology at Fabiana Fernandes de Lima, Djalma Ribeiro da Weihai, Weihai, China Silva, JoãoT. Nóbrega de Medeiros, Federal 117: Experimental Measurement of Friction University of Rio Grande do Norte, Natal, Brazil for Elevator Sliding Guide System 1241: Friction and Wear of Ni Coatings with Xi Shi, Huibo Fang, Lei Qian, Shanghai Jiao Tong Nanosize Particles of SiC University, Shanghai, China, Simo Makimattila, KONE Mara Kandeva, Technical University ­ Sofia, Sofia, Elevator Co., Kunshan, China, Changming Zhu, Bulgaria, Dimitar Karastoyanov, Bulgarian Academy Shanghai Jiao Tong University, Shanghai, China of Sciences, Sofia, Bulgaria, B. Ivanova, Anna 216: Experimental Device to Identify Friction Dimitrova, Yavor Sofronov, Nikolay Nikolov, Levels for Airport Applications Technical University ­ Sofia, Sofia, Bulgaria Enrico Galvagno, Mauro Velardocchia, Alessandro 1262: Tribological Properties of Textured Vigliani, Politecnico di Torino, Torino, Italy Copper Alloy Surface Containing Micro Sized Sulfide Phase TH2-FW11 Experiment, equipment, test Tomohiro Sato, Yoshimasa Hirai, Takehisa Fukui, methods 2 Kurimoto Ltd., Osaka, Japan, Yuma Horiba, Kazuki Room 5 11:00 – 13:00 Tanizawa, Hatsuhiko Usami, Meijo University, 230: Influence Study of Wear Parameters in Nagoya, Japan three-body Abrasion 1304: Effect of Surface Functionalization of Yen The Doan, Kristin M. de Payrebrune, Matthias Friction Materials Fillers on Physical and Tri- Kröger, Technische Universität Bergakademie bological Properties Freiberg, Freiberg, Germany Diego A. Santamaria Razo, Diego Pellerej, Pietro 337: Study on Car Brake Noise Generation by Buonfico, ITT Motion Technologies Italia srl, Barge Friction with Loading Control Tribometer (CN), Italy, Barbara Onida, Politecnico di Torino, Yan‐Ming Chen, David Caze, Jan Brzezinski, Pierre Torino, Italy Chalandon, Cetim ­ Technical Centre of Mechanical 1310: Improving Operational Performances of Industry, Senlis, France, Moussa Diaby, Arnaud Wearing Parts in the Charging Mechanisms of Lucas, Joël Zami, PSA, Peugeot­Citroën Automobile, the HK 33E Infantry Rifles France Ayhan Aytaç, Turkish Military Academy, Ankara, 393: Friction and Adhesion of Rubber Con- Turkey, Uğur Malayoğlu, Dokuz Eylül University, tacts at High Temperatures İzmir, Turkey Christian Berndt, Ringo Nepp, Matthias Kröger, TU 1319: An Integrated Hard- and Soft- ware Bergakademie Freiberg, Freiberg, Germany Triboelectrochemical Test Rig for Tribocorro- 401: Limiting States of Metal/Polymer System sion Experiments under Sliding Friction Marc Bellantonio, TRIBOtechnic, Clichy, France Leonid Sosnovskiy, Interdepartmental Laboratory “TRIBO­FATIGUE”, Gomel, Belarus, Aleksandr

44 WTC 2013 Technical Sessions

Bogdanovich, Yanka Kupala State University of Marek Kalbarczyk, Remigiusz Michalczewski, Grodno, Grodno, Belarus, Sergei Sherbakov, Marian Szczerek, Magdalena Trzos, Jan Wulczyński, Belarusian State University, Minsk, Belarus Institute for Sustainable Technologies – National 629: Contact Fatigue Life Investigations and Research Institute (ITeE­PIB), Radom, Poland Wear Mechanisms of Gears with Different 960: Analysis of Temperature Effect on the Steels and Hardening Process Wear Mechanism of TPU-steel Contact Pair Andreas Trausmuth, Ewald Badisch, AC2T Research F. Javier Martínez, Margarita Canales, Noelia Alcalá, GmbH, Wiener Neustadt, Austria, Istvan Godor, Miguel A. Jiménez, Instituto Tecnológico de Aragón, Michael Stoschka, Florian Grün, Montanuniversität Zaragoza, Spain Leoben, Leoben, Austria, Alexander Dietrich, MAGNA 988: A New Jaw Crusher Design for Testing of Powertrain, Lannach, Austria High Stress Abrasion 1145: Abrasive Wear Mechanisms of Rubber Juuso Terva, Veli‐Tapani Kuokkala, Kati Valtonen, Conveyor Belts in Lab-scale Tests Tampere University of Technology, Tampere, Finland, Wolfgang Molnar, Markus Varga, J. Brenner, AC2T Pekka Siitonen, Metso Minerals Inc., Tampere, Research GmbH, Wiener Neustadt, Austria, Markus Finland Keller, Semperit Technische Produkte GmbH, 1131: Detailed Characterization of Microcrys- Wimpassing im S., Austria, Ewald Badisch, AC2T talline Diamond Coatings, Thanks to the Re- Research GmbH, Wiener Neustadt, Austria laxation Tribometer Technique Michel Belin, École Centrale de Lyon, Écully, France, TH3-FW12 Experiment, equipment, test Hiroyuki Miki, Tohoku University, Sendai, Japan, Fida methods 3 Majdoub, École Centrale de Lyon, Écully, France Room 5 14:00 – 16:00 1194: Studies Friction Behaviour and Wear 427: Generation and Verification of Wear Rate of Poly(methylmethacrylate) by New Load Spectrum Design Reciprocating Test Machine Yuping Yan, Yongsheng Zhu, Youyun Zhang, Sisi Pratip Vongbandit, Benjawan Saengwichien, Qian, Zhao Chen, Key Laboratory of Education Panomrat Somwung, Thailand Institute of Scientific Ministry for Modern Design and Rotor­Bearing and Technological Research, Klongluang, Thailand System, Xi’an, China 679: Influence of Steel Grade and Contact 559: Friction and Wear Characteristics of the Conditions on Initiation of Rail Squat Defects PTFE Braided Composites Samuel Simon, Aurélien Saulot, Université de Lyon, Jian Liu, Northwestern Polytechnical University, Lyon, France, Xavier Quost, Régie Autonome des Xi’an, China, Yongzhen Zhang, Sanming Du, Henan Transports Parisiens (RATP), Fontenay­Sous­Bois, University of Science and Technology, Luoyang, China France, Yves Berthier, Université de Lyon, Lyon, France 677: Study of Adhesion and Evaluation of the Friction Forces Using a Scaled Roller-Rig 61: Experience in Application of the Friction Nicola Bosso, Antonio Gugliotta, Nicolò Zampieri, Pendulum Bearings for Seismic Isolation Politecnico di Torino, Torino, Italy Yuri Drozdov, Academy of Sciences, Moscow, Russian Federation, Vladimir Nadein, OGS 678: A Method to Define the Rail Quality Con- Energodiagnostika, Moscow, Russian Federation, dition due to Wear Vladimir Puchkov, Academy of Sciences, Moscow, Nicola Bosso, Antonio Gugliotta, Nicolò Zampieri, Russian Federation Politecnico di Torino, Torino, Italy 728: Research on Tribological Properties of PS3-FW Posters Cast Iron at High-Speed Dry Sliding Condition Atrium 8:30 – 16:30 Yue Chen, Ying‐yu Huang, Chang‐ling Zhu, Henan University of Science & Technology, Luoyang, China 31: Effects of Slip Systems upon Friction and Wear at (001) Faces of Rock Salt-type Single 900: Numerical Study of the Friction on Soft Crystals Matter: Role of Nature and Size of Surface Erika Kasahara, Chuo University, Tokyo, Japan, Kaori Patterning Niki, Chiba University, Chiba, Japan, Hitoshi Shindo, Vincent Le Houérou, Tristan Bourrel, Joël Krier, Chuo University, Tokyo, Japan Christian Gauthier, Institut Charles Sadron, Strasbourg, France 132: Influence of Test Equipment and Work- ing Conditions on the Coefficient of Friction TH4-FW13 Experiment, equipment, test Values methods 4 Demófilo Maldonado Cortés, University of Monterrey (UDEM), San Pedro Garza García, Mexico Room 5 16:30 – 18:50 187: Complex of Tribological Researches 784: Optimization of Test Parameters Influ- «ITRIB-System» encing the Dry Friction of W-DLC Coated Elements

45 Technical Sessions WTC 2013

Viacheslav Khovanskiy, Moscow Automobile and 1067: Boundary-controlled Barostats for Slab Road Construction State Technical University, Geometries in Molecular Dynamics Simula- Moscow, Russian Federation tions 210: The Global Wear Parameter for Rail- Szymon Maćkowiak, University of Technology, wheel Metro System Poznań, Poland, Chiara Gattinoni, David M. Heyes, Andrei Tudor, Polytechnic University of Bucharest, Imperial College London, London, United Kingdom, Bucharest, Romania, Ilias Tountas, ATTIKO METRO Arkadiusz Brańka, Polish Academy of Sciences, S.A., Athens, Greece, Mircea Sebesan, METROREX S.A., Poznań, Poland, Daniele Dini, Imperial College Bucharest, Romania, Nicolae Sandu, Romanian London, London, United Kingdom Authority of Rail Way, Bucharest, Romania 1102: Transition of Surface Morphology in 219: Role of Surface Mesoscale Deformations Rolling/SLiding of Polymer-metal Contacts on Multi-degradation Mechanisms of Stainless Jacob Sukumaran, Seyfollah Soleimani, Vanessa Steel Exposed to Tribocorrosive Environment Rodriguez, Ghent University, Gent, Belgium, Matyas Amin H. Zavieh, Nuria Espallargas, Norwegian Ando, Szent Istvan University, Godollo, Hungary, University of Science and Technology, Trondheim, Wilfred Philips, Patrick De Baets, Ghent University, Norway Gent, Belgium 243: Energetic Aspects of Scuffing Resistance 1106: Effect of Shaft Corrosion Resistance on Forming of 42CrMo4 Steel Fretting Wear with Composite Bearings Łukasz Wojciechowski, Poznań University of Michael Kim, GGB Bearing Technologies, Thorofare, Technology, Poznań, Poland NJ, United States 249: Tribological Behavior of Ultramid Rein- 1133: High Temperature Wear Phenomena in forced with Cloisite Steel Production Plants on the Example of a Olga Konovalova, Czech Technical University, Coke Quenching Car Prague, Czech Republic, Jan Suchanek, Czech Markus Varga, Ewald Badisch, Horst Winkelmann, Technical University, Prague, Czech Republic AC2T Research GmbH, Wiener Neustadt, Austria, Karl Adam, Voestalpine Stahl GmbH, Linz, Austria 697: Fluorescence Recovery after Patterned Photobleaching Measurements of Sheared 1248: The Influences of a Hydrogen Environ- Confined Polymer: a New Experimental Ap- ment on the Tribological Properties of Pure proach. Metals Li Fu, Anne Rubin, Damien Favier, Thierry Charitat, Kanao Fukuda, Universiti Teknologi Malaysia, Kuala Christian Gauthier, Strasbourg University, Lumpur, Malaysia, Joichi Sugimura, Kyushu Strasbourg, France University, Fukuoka, Japan 961: Effect of Vibration on Friction Reduction 1251: Composite Coatings to Improve Dura- in Dry and Lubricated Sliding Conditions bility of the Working Body of the Drill Shin‐Sung Yoo, Dae‐Eun Kim, Yonsei University, Mara Kandeva, Boryana Ivanova, Technical Seoul, Republic of Korea University­Sofia, Sofia, Bulgaria, Vyara Pozhidaeva, 992: The Friction and Wear Mechanism in University of Mining and Geology “St. Ivan Rilski”, Multi-component Polyoxymethylene-based Sofia, Bulgaria, Dimitar Karastoyanov, Bulgarian Composites when Mating with Steel Academy of Sciences, Sofia, Bulgaria, Juliana Dymitry Capanidis, Wrocław University of Javorova, University of Chemical Technology and Technology, Wrocław, Poland Metallurgy, Sofia, Bulgaria 1012: A Study on Friction Characteristics of LA – Lubricants and Additives Magnetorheological Elastomer Kwang‐Hee Lee, Chenglong Lian, Chul‐Hee Lee, Inha TH1-LA10 Tribochelmistry III University, Incheon, Republic of Korea, Cheolhyun Kim, Won‐Oh Cho, CALS Corporation, Asan, Republic Room 6 8:30 – 10:30 of Korea 372 – Keynote: Friction-reducing Polymeric 1022: Wear Properties of Glass-Ceramic Coatings “for Everyone” Coatings With Plasma Spray Technique Via by Nicholas Spencer, Robert Bielecki, ETH, Zürich, Melted Basalt Glass Powders Switzerland Ediz Ercenk, Gunhan Bayrak, Akin Akinci, Ugur Sen, 1195: Friction and Wear Performance Map- Senol Yilmaz, Sakarya University, Sakarya, Turkey ping of Engine Oils 1055: Sliding Wear Behavior of Cr-Al-N Ksenija Topolovec Miklozic, Powertrib Limited, Coated AISI D2 Steel Oxford, United Kingdom Bulent Kilinc, Sakarya University, Sakarya, Turkey, 155: Prediction of Micropitting Performance Ozkan Cegil, Körfez Technical and Industrial of Oil/Additive Solutions in Rolling and Sliding Vocational High School, Körfez, Turkey, Saduman Contacts Sen, Ugur Sen, Sakarya University, Sakarya, Turkey

46 WTC 2013 Technical Sessions

Victor Brizmer, Henry Rihard Pasaribu, Guillermo TH3-LA12 LUBMAT II Morales‐Espejel, SKF Engineering & Research Centre, Room 6 14:00 – 16:00 Nieuwegein, Netherlands 119: Study on Tribology Performance of Die- 282: Effects of Slide-Roll Ratio on the Behav- sel Engine Oil Using SRV4 Tribometer iors of Grease Fingers, Reservoir and EHL Xiaohong Xu, PetroChina Lanzhou Lubricating Oil Film Thickness R&D Institute, Lanzhou, China, Shuren Sun, Lu Huang, Dan Guo, Shizhu Wen, Tsinghua DongFeng Commercial Vehicle Technical Center, University, Beijing, China Wuhan, China, Ailian Lei, Peng Wang, PetroChina 288: A Study of the Grease with Water Resis- Lanzhou Lubricating Oil R&D Institute, Lanzhou, tance and Low Friction Torque China, Guanghua Peng, DongFeng Commercial Noriyuki Inami, Michita Hokao, Kazuhiro Soga, Vehicle Technical Center, Wuhan, China Atsushi Yokouchi, NSK Ltd., Fujisawa, Japan 262: Friction and Wear Performance of 1186: Q-factor Amplification and Parasitic Ef- MoDTC- and Ester-containing Lubricants over fect Compensation Using a Self-actuated Pie- Steel Surfaces under Reciprocating Conditions zoelectric AlN MEMS Resonator for Viscosity Eduardo D. Trindade, Petrobras S.A., Rio de Janeiro, Measurements RJ, Brazil, Alexander Zuleta Durango, Amilton Martin Kucera, Vienna University of Technology, Sinatora, Universidade de São Paulo, São Paulo, SP, Vienna, Austria, Tomás Manzaneque, José L. Brazil Sánchez‐Rojas, Universidad de Castilla­La Mancha, 594: Functionalized Graphene: Fabrication and 2 Ciudad Real, Spain, Nicole Dörr, AC T Research Tribological Behavior in Ester Oil GmbH, Wiener Neustadt, Austria, Achim Bittner, Bernadette Schlüter, Andreas Kailer, Fraunhofer Ulrich Schmid, Vienna University of Technology, Institute for Mechanics of Materials IWM, Freiburg, Vienna, Austria Germany, Rolf Mülhaupt, Albert‐Ludwigs University, TH2-LA11 LUBMAT I Freiburg, Germany 540: Tribological Performance of DLC/Cast Room 6 11:00 – 13:00 Iron and Steel/Cast Iron System when Lubri- 164 – Keynote: Polyglycol-based Engine Oils– cated in Fully Formulated Oils with Different Has the Industryto Adapt to this Lubricant Concentration of MoDTC-type Friction Modi- Class? fier Stephen Merryweather, Daniel Zweifel, DOW Europe Shahriar Kosarieh, Ardian Morina, University of GmbH, Horgen, Switzerland, Mathias Woydt, BAM Leeds, Leeds, United Kingdom, Jonathan Flemming, Federal Institute for Materials Research and Testing, Emmanuel Lainé, Infineum UK Limited, Abingdon, Berlin, Germany United Kingdom, Anne Neville, University of Leeds, 1239: Understanding of Failure in Lubricated Leeds, United Kingdom Systems by Use of Mass Spectrometry 512: Evaluation of Tribological Property for Nicole Dörr, Andjelka Ristic, Alexander Kassler, Hydraulic Fluid by Roller on Disk Test AC2T Research GmbH, Wiener Neustadt, Austria Yukiko Naka, Japan Lubricating Oil Society, 688: The Study about Ultra Low Ash and No Fuabashi, Japan, Masakazu Otsuka, Japan Phosphorus Engine Oil Lubricating Oil Society, Fuabashi, Japan Hiroshi Fujita, Idemitsu Kosan Co., Ltd., Tokyo, Japan, 946: Effect of Additive on the Tribological Yasunori Shimizu, Junya Iwasaki, Idemitsu Kosan Properties of Nano-stripe Surface Co., Ltd., Ichihara, Japan Miki Nakano, Koji Miyake, Atsushi Korenaga, 416: Surface Influence on Soot Aggregation National Institute of Advanced Science and and Friction in a Lubricated Contact Technology, Tsukuba, Japan, Yasuhisa Ando, Tokyo André Ernesto, Denis Mazuyer, Juliette Cayer‐ University of Agriculture and Technology, Tokio, Barrioz, École Centrale de Lyon, Écully, France Japan 1321: Synthetic Lubricants: from Molecular TH4-LA13 LUBMAT I Design to Engineering Applications Weimin Liu, Feng Zhou, Chinese Academy of Science, Room 6 16:30 – 18:50 Lanzhou, China 1024: Analysis of the Additive Layer Forma- 4: Effect of Water in Engine Oil on Steel Wear tion and Evaluation of Wear Mechanisms of under Boundary Lubrication and the Wear Phosphorous-free and Conventional Engine Mechanism Lubricants on the Surface of Cylinder Liner Takashi Izumi, Hiroshi Moritani, Mamoru Tohyama, and Piston Rings Toshihide Ohmori, Toyota Central R&D Labs., Inc., Hakan Kaleli, Yıldız Technical University, İstanbul, Nagakute, Japan, Kosuke Fujimoto, Hiroyuki Turkey, Yves Berthier, Institut National des Sciences Murase, Toyota Motor Corporation, Toyota, Japan Appliquées de Lyon, Lyon, France, Dogus Özkan,

47 Technical Sessions WTC 2013

Levent Yüksek, Yıldız Technical University, İstanbul, 88: A High-precision, High-speed System for Turkey Measuring Instantaneous Lubricant Film 124: Energetic Investigations of the Structural Thickness Profiles Degradation of Lubricating Greases Caused by Gonzalo Garcia‐Atance Fatjo, Edward H. Smith, Ian Friction Sherrington, University of Central Lancashire, Erik Kuhn, Hamburg University of Appl.Sc., Hamburg, Preston, United Kingdom Germany 50: How Rheology Influences the Interfacial 534: A New Biocompatible Ionic Liquid as an Friction Law of a Circular EHL Oscillating Slid- Antiwear Additive for Biodegradable Lubri- ing Contact cants Emmanuel Rigaud, Denis Mazuyer, Juliette Cayer‐ Bhawna Khemchandani, Indian Oil Corporation Ltd., Barrioz, École Centrale de Lyon, Écully, France Faridabad, India, Anthony Somers, Patrick Howlett, 15: Determination of the Stick-slip Behavior Deakin University, Burwood, Australia, A.K. Jaiswal, of Slideway Oils by Using the SRV Ttribome- Indian Oil Corporation Ltd., Faridabad, India, E. ter Test Rig Sayanna, Indian Oil R&D centre, Faridabad, India, Wilhelm Rehbein, Rhein Chemie Rheinau GmbH, Maria Forsyth, Deakin University, Burwood, Mannheim, Germany, Juergen Rigo, University of Australia Mannheim, Mannheim, Germany, Isabell Lange, 1305: Engine Oil Advanced Technologies For Rhein Chemie Rheinau GmbH, Mannheim, Germany Fuel Economy Targets Achievement In HD 769: Flow-Profile Mapping in Elastohydrody- Engines namic Lubrication Region Flavia Gili, Davide Mangherini, Centro Ricerche Fiat, Janet Wong, Aleks Ponjavic, Imperial College Orbassano (TO), Italy, Andrea Dolfi, Gianni London, London, United Kingdom Cecconello, Andrew Ogley, Petronas Lubricants Italy, Villastellone (TO), Italy, Peter Beyer, FPT TH4-LF9 Lubricants and Additives Motorenforschung AG, Arbon, Switzerland Room 7 16:30 – 18:50 25: Deposition on Bearing Pads by Insoluble 307: A Model to Relate Siloxane Chemical Particulates in Turbine Oils Structure to Tribological Performance Fumihiko Yokoyama, Yuka Iwama, Masahiro Thomas J. Zolper, Northwestern University, Maruyama, Mitsuo Sano, IHI Corporation, Evanston, IL, United States, Manfred Jungk, Dow Yokohama, Japan Corning GmbH, Wiesbaden, Germany, Tobin J. Marks, 130: Experimental Analysis of Anti-wear Per- Yip‐Wah Chung, Qian Wang, Northwestern formance of Marine Engine Lubricants University, Evanston, IL, United States Mayank Anand, Mark Hadfield, Ben Thomas, 456: Friction and Wear Sudies of Si and Ti Bournemouth University, Poole, United Kingdom, Surfaces Lubricated by Aqueous Copolymer Steve Austen, Rob Cantrill, Royal National Lifeboat Bingjing Lin, A Kiet Tieu, Hongtao Zhu, Buyung Institution, Poole, United Kingdom, J. L. Viesca, Kosasih, University of Wollongong, Wollongong, University of Oviedo, Oviedo, Spain, N. Garland, Australia Bournemouth University, Poole, United Kingdom 651: Potential-Controlled Boundary Lubrica- 1317: Meeting the Tribological Challenges of tion at Metal Surfaces in Propylene Carbonate Wind Turbine Gearboxes with a New Formu- Solutions lation Approach Xiaoyong Yang, Yonggang Meng, Yu Tian, Tsinghua Rene Koschabek, Christoph Wincierz, Evonik Oil University, Beijing, China Additives, Darmstadt, Germany 567: On the Effect of DLC Coating on Full Film LF – STLE/ASME – Lubrication EHL Friction Marcus Björling, Pär Marklund, Roland Larsson, Fundamentals Luleå University of Technology, Luleå, Sweden TH1-LF8 EHL measurement 1143: Evaluation of Polymer Wear Assess- ment Methods Room 7 8:30 – 10:30 Sophie Froeland, Ion M. Sivebaek, Technical 506: Dynamic Measurement of EHL Film University of Denmark, Lyngby, Denmark Thickness 823: Ashless Friction Modifier and Lubrication Yingjun Chen, Yazhen Wang, Ping Huang, South Surface: Stribeck Curve Approach China University of Technology, Guangzhou, China Mohamadou B. Diew, Jean Michel Martin, École 510: Localized Boundary Effect on EHL Film Centrale de Lyon, Écully, France, Mehdi El Fassi, Shape Research and Advanced Engineering at Peugeot Z. Fu, P.L. Wong, City University of Hong Kong, Hong Sport, Vélizy Villacoublay, France, Denis Mazuyer, Kong, F. Guo, Qingdao Technological University, École Centrale de Lyon, Écully, France Qingdao, China

48 WTC 2013 Technical Sessions

782: Self-Controlled Viscosity Using Interac- Pyung Hwang, Yeungnam University, Gyeongsan, tion between Liquid Crystals and Boundary Republic of Korea, Polina Khan, Kamchatka State Films Technical University, Petropavlovsk­Kamchatski, Chiharu Tadokoro, Ken Nakano, Yokohama National Russian Federation University, Yokohama, Japan 523: Modeling Method of Aeroengine Bearing Chamber Oil/Air Two-phase Flow BE – Bearings Hengchao Sun, Guoding Chen, Tao Wang, Northwestern Polytechnical University, Xi’an, China TH1-BE10 Rolling Bearings 5 Room 9 8:30 – 10:30 TH3-BE12 Magnetic Levitation 620: Accelerated Life Test for Roller-Ball Room 9 14:00 – 16:00 Type Coaxial Bearing Loaded on Outer Race- 985: Rotational Power Loss on a Rotor Ra- way dially Supported by Electrodynamic Passive Jong‐Won Park, Dong‐Cheon Baek, Byung‐Oh Choi, Magnetic Bearings Korea Institute of Machinery & Materials, Daejeon, Joaquim Girardello Detoni, Fabrizio Impinna, Nicola Republic of Korea, Byoung‐Young Song, GMB Korea Amati, Andrea Tonoli, Politecnico di Torino, Torino, Corp., Changwon, Republic of Korea, Gun‐Tae Jung, Italy GMB Korea Corp., Changwon, Republic of Korea 1095: Characterization and Improvement of 603: Formation of Anti-Wear Films in Rolling Axial and Radial Stiffness of Contactless Bearings due to Run-in Procedures Thrust Superconducting Magnetic Bearings Andreas Stratmann, Christoph Hentschke, Georg Ignacio Valiente‐Blanco, Efren Diez‐Jimenez, Jacobs, RWTH Aachen University, Aachen, Germany Cristian Cristache, Marco A. Alvarez‐Valenzuela, 797: A Novel Skid Damage Test Rig for Rolling Juan Sanchez‐Garcia‐Casarrubios, Jose L. Perez‐ Bearing and Its Experimental Study Diaz, Universidad Carlos III de Madrid, Madrid, Spain Junning Li, Wei Chen, Youbai Xie, Xi’an Jiaotong 1103: Non-hysteretic Passive Magnetic Linear University, Xi’an, China Bearing for Cryogenic Environments 847: Study of the Short Term Effect of Fe3O4 Victor Castro‐Fernandez, Efren Diez‐Jimenez, Particles in Rolling Element Bearings Ignacio Valiente‐Blanco, Jose L. Perez‐Diaz, Stephan Schnabel, Pär Marklund, Roland Larsson, Universidad Carlos III de Madrid, Leganés, Spain Luleå University of technology, Luleå, Sweden 1164: Stability Analysis of an Automated Ma- 877: Multi-body Vibration Modeling of Rolling glev People Mover System Bearing System Roberto Bassani, Massimo Losa, Antonino Musolino, Xing Yuan, Yongsheng Zhu, Youyun Zhang, Xi’an Rocco Rizzo, University of Pisa, Pisa, Italy Jiaotong University, Xi’an, China 1166: Permanent Magnet Bearings 64: Observation of Spherical Surfaces using a Antonino Musolino, Rocco Rizzo, Ernesto Tripodi, Laser Microscope with Wide Field of View University of Pisa, Pisa, Italy Isami Nitta, Yosuke Tsukiyama, Takuya Watanabe, 277: Friction and Wear Behaviors of Poly- Naoyuki Fukushima, Niigata university, Niigata, mer/Steel Laminated Composites at Elevated Japan Temperatures Dongya Zhang, Pengbo Zhang, Guangneng Dong, TH2-BE11 Gas Bearings 2 Xi’an Jiaotong University, Xi’an, China Room 9 11:00 – 13:00 931: Impact Characteristics of Optimized Hy- TH4-BE13 Fluid-Film Bearings 4 drodynamic Thrust Air Bearing Room 9 16:30 – 18:50 Masayuki Ochiai, Yuta Sunami, Hayato Sasaki, 661: Influence of Bush Wear in Water Lubri- Hiromu Hashimoto, Tokai University, Hiratsuka, cated Marine Stern Tube Bearings with Shaft Japan Misalignment 1016: Theoretical and Experimental Analysis Wojciech Litwin, Gdansk University of Technology, of the Pneumatic Hammer Instability in an Gdansk, Poland Aerostatic Bearing 673: Creep Characteristics of White Metal Mihai Arghir, Franck Balducchi, Amine Hassini, Lined Bearings Université de Poitiers, Futuroscope Chasseneuil, Tomoaki Yamashita,, Saburo Usami, Hitachi France, Sébastien Guingo, SNECMA ­ Division Research Labratory, Hitachi, Japan Moteurs Spatiaux, Vernon, France, Emelyne Renard, 700: Sensitivity Analysis of Non-Linear Forces CNES, Paris, France in Oil-Film Journal Bearings 1110: Static Study of the Arc Effect on Annu- Andrea Vania, Paolo Pennacchi, Steven Chatterton, lar-Thrust Aerostatic Porous Bearings Ezio Tanzi, Politecnico di Milano, Milano, Italy

49 Technical Sessions WTC 2013

722: Influences of Journal Rotating Direction Marat A. Bronovets, Russian Academy of Sciences, on Cryogenic Hybrid Journal Bearings Moscow, Russian Federation Mamoru Oike, Ishinomaki Senshu University, 179: Trouble-free Tribo-Design Implementa- Ishinomaki, Japan, Masataka Kikuchi, Satoshi tion from Learning Case Studies Takada, Takayuki Sudo, Tomoyuki Takano, Japan Masato Tanaka, University of Tokyo, Matsudo, Japan, Aerospace Technology, Kakuda, Japan Shojiro Sugimura, Sugimura Planning Corporation, 302: Low Friction, Low Noise, High Normal Okayama, Japan, Minoru Hanahashi, Daido Metal Projected Pressure Water-lubricated Bearing Co., Inuyama, Japan Elastomer 1236: Multi-phase Bit Cutter-on-rock Tri- Xin‐cong Zhou, Zhi‐min Yan, Hong‐ling Qin, Kai Liu, bometry: Understanding the Drilling Process Wuhan University of Technology, Wuhan, China for Renewable Energy Resources 385: Analysis of an Hydrostatic Worm Rack Patrick S.M. Dougherty, Jeremiah N. Mpagazehe, Drive for Large Machine Tools John Shelton, C. Fred Higgs, Carnegie Mellon Alberto Cassinari, Giacomo Bianchi, Mario Poli, University, Pittsburgh, PA, United States CNR­Institute for Industrial Technologies and 1137: Application of Shaft Orbits for Rotordy- Automation, Milano, Italy namic Crack Diagnostics 724: Lubrication Analysis of a Stern Tube Philip Varney, Itzhak Green, Georgia Institute of Bearing Considering Misalignment Technology, Atlanta, GA, United States Tao He, Xiqun Lu, Dequan Zou, Yibin Guo, Wanyou 107: Technical Specifications and PM Proce- Li, Harbin Engineering University, Harbin, China dures Merging, for a More Robust Reliability Approach. PS3-BE Posters Giuseppe Adriani, Matteo Campatelli, Mecoil Atrium 8:30 – 16:30 Diagnosi Meccaniche srl, Florence, Italy, Edoardo 570: Dynamic Behavior Analysis of a Rotor- Bassanini, Vipetrol spa, Vigevano (PV), Italy, Ball Bearing System with Nonlinear Bearing Alessandro Paccagnini, Mecoil Diagnosi Meccaniche Stiffness Characteristics srl, Florence, Italy Pyung Hwang, Van Trang Nguyen, Yeungnam 637: Automated System for On-line Oil Analy- University, Gyeongsan, Republic of Korea sis 747: Influences of Raceway Texture on the Jože Vižintin, José Salgueiro, Gabrijel Peršin, Boris Torque of Needle Roller Thrust Bearing Kržan, University of Ljubljana, Ljubljana, Slovenia Tetsuzo Hatazawa, Takahisa Kawaguchi, Utsunomiya University, Utsunomiya, Japan TH2-EC11 Friction in Machine Components 779: Condition Trend Prediction of Machine Tool Spindle Based on the Multiple-input Room 10 11:00 – 13:00 Multiple-output Support Vector Regression 703: Influences of Friction of Vane Sliding Sur- Xiaoran Zhu, Yongsheng Zhu, Youyun Zhang, Xi’an face on Lubricating Condition between Rolling Jiaotong University, Xi’an, China Piston and Vane Top in Rotary Compressors 872: Stability Analysis of Journal Bearings Lu- Yasutaka Ito, Hitoshi Hattori, Corporate Research & bricated by Viscoelastic Fluids Development Center, Toshiba Corporation, Kawasaki, Jun Tomioka, Hirotsugu Hayashi, Norifumi Japan, Kazuhiko Miura, Toshiba Carrier Corporation, Miyanaga, Waseda University, Tokyo, Japan Fuji, Japan 875: Linear and Nonlinear Stability Analysis of 808: High Speed Friction and Wear Measure- Herringbone-Grooved Aerodynamic Journal ments on Innovative Polymeric Materials for Bearings with Viscoelastic Support Elements Sliding Elements in Reciprocating Compres- Norifumi Miyanaga, Jun Tomioka, Waseda sors University, Tokyo, Japan Luigi Mazza, Roberto Grassi, Andrea Trivella, Giulio 969: Effect of Nanoparticle on Load Capacity Malucelli, Politecnico di Torino, Torino, Italy in Gas Film Lubrication 60: Oil Film Formation in the Sliding Parts of Zhiru Yang, Dongfeng Diao, Hongyan Fan, Xi’an Vane of Multiple Vane Type Compressors Jiaotong University, Xi’an, China Eita Kureha, Yanmar Co. Ltd., Maibara, Japan, Masayoshi Muraki, Shonan Institute of Technology, EC – ECOTRIB 2013 – Tribology of Fujisawa, Japan Machine Elements 492: Static Friction Experiments of Lubricated Sliding Systems on a SRV TH1-EC10 Tribodesign and Maintenance Stefan Klien, Anke Ristow, Florian Ausserer, Room 10 8:30 – 10:30 Alexander Diem, V­Research GmbH, Dornbirn, Austria 152: Tribology Problems in Space

50 WTC 2013 Technical Sessions

1025: Lab-scale Modeling of Rail Damage Phe- Alessandro Tasora, Edzeario Prati, Università degli nomena Studi di Parma, Parma, Italy Thomas Lebersorger, Ewald Badisch, Andreas 460: Experimental Study on Grooved Faces in Trausmuth, AC2T Research GmbH, Wiener Neustadt, a 2-phase Mechanical Seal Austria, Stephan Scheriau, Hans P. Brantner, Tao Wang, Weifeng Huang, Xiangfeng Liu, Yongjian Voestalpine Schienen GmbH, Leoben, Austria, Li, Yuming Wang, Tsinghua University, Beijing, China 2 Friedrich Franek, AC T Research GmbH, Wiener 494: Modeling Radial Lip Seal Friction – A Neustadt, Austria FEM-based Multi-Scale Soft Micro- 813: The Effect of Gaseous Environments on Elastohydrodynamic Lubrication Approach Friction and Wear of Steel-steel Contacts Bengt Wennehorst, Gerhard Poll, Leibniz Universität Florian Ausserer, Igor Velkavrh, Stefan Klien, V­ Hannover, Hannover, Germany Research GmbH, Dornbirn, Austria, Josef Brenner, 949: Evaluation of Lip-Seal Properties against 2 AC T Research GmbH, Wiener Neustadt, Austria, Pressurized Ethanol Flow for Turbopump in Pierre Forêt, Linde AG, Unterschleißheim, Germany, Rocket Engine Alexander Diem, V­Research GmbH, Dornbirn, Manabu Jinno, Hayato Morishita, Tomoko Austria Hirayama, Takashi Matsuoka, Doshisha University, Kyotanabe, Japan, Makoto Yoshida, Satoshi Takada, TH3-EC12 Rolling-based Applications Tomoyuki Takano, Japan Aerospace Exploration Room 10 14:00 – 16:00 Agency, Kakuda, Japan 215: Genetic Algorithm and Artificial Bee Col- 675: The T-Ring Principle: A Sophisticated ony Algorithm for Journal Bearing Optimiza- Approach of Sealing Dynamically tion Gonzalo Barillas, Matthias Wangenheim, Patrick Luca Gorasso, Liqin Wang, Harbin Institute of Kinsch, Jürgen Jäckel, Freudenberg Sealing Technology, Harbin, China Technologies, Schwalmstadt, Germany 1057: 3D Numerical Modeling of Wheel-rail 28: Simulation of Hydraulic Rod Seals with a Contact Dynamics: Application to Straight Plunge-Ground Rod Track Corrugation Yuli Huang, Richard F. Salant, Georgia Institute of Fangfang Duan, Aurélien Saulot Yves Berthier, INSA­ Technology, Atlanta, United States Lyon, Villeurbanne, France 1108: Study of Effects of Wheel Flange/Rail MF – Tribology in Manufacturing Gauge Contact Lubrication Milan Omasta, Josef Frýza, Martin Hartl, Ivan TH2-MF3 Metal forming Křupka, Brno University of Technology, Brno, Czech Room 7 11:00 – 13:00 Republic 29: A Study of Shear Friction Factor in 373: Investigation of Thermoelastic Instabili- FSP/FSW for Developing a Finite Element ties in the Wet Clutch System with an Equiva- Model and Its Importance in the Context of lent Friction Coefficient Formation of Defect Free and Defective Weld Jiaxin Zhao, Heyan Li, Biao Ma, Beijing Institute of Malik Vinayak, K. M. Midhun, Satish V. Kailas, Indian Technology, Beijing, China, Yunbo Yi, University of Institute of Science, Bangalore, Bangalore, India Denver, Denver, CO, United States 39: A Novel Sensor for Lubrication and Con- 704: The Performances Test Results of Finger tact Measurement in Metal Rolling Seal Rob S. Dwyer‐Joyce, Andy K. Hunter, University of Yanchao Zhang, Xi’an University of Technology, Xi’an, Sheffield, Sheffield, United Kingdom China, Guoding Chen, Northwestern Polytechnical 509: Friction Modeling for Sheet Metal Form- University, Xi’an, China, Kai Liu, Xi’an University of ing Processes under Loading and Reloading Technology, Xi’an, China, Lianjie Zhou, Chengdu, Contact Conditions China, Haitao Hu, China Gas Turbine Establishment, Dinesh K. Karupannasamy, Materials innovation Chengdu, China institute (M2i), Delft, Netherlands, Matthijn B. de Rooij, Dirk J. Schipper, University of Twente, TH4-EC13 Seals 2 Enschede, Netherlands Room 10 16:30 – 18:50 694: Friction Characteristic of Palm Olein as 102: New High Performance Test Rig for Seal- Lubricant in Plane Strain Extrusion Process ing Systems Characterization Samion Syahrullail, Universiti Teknologi Malaysia, Bihotz Pinedo, Marcello Conte, Ion Perez, Manex Skudai, Malaysia, Shunpei Kamitani, Kenji San Martin, Eneko Gomez‐Acedo, Amaya Igartua, Nakanishi, Kagoshima University, Kagoshima, Japan IK4­TEKNIKER, Eibar, Spain 727: New Approaches for Lubrication in Steel 233: Effect of Shaft Roughness on Axial and Cold Rolling Radial Seals at Varying Pressure and Velocity

51 Technical Sessions WTC 2013

Tilo Reichardt, VDEh­Betriebsforschungsinstitut MT – Tribology of Materials GmbH, Düsseldorf, Germany, Martin Raulf, ThyssenKrupp Steel AG, Duisburg, Germany, Michael TH1-MT6 Involved Phenomena 2 Herrmann, Chemische Werke Kluthe GmbH, Room 1 8:30 – 10:30 Heidelberg, Germany, Cornelia Mömming, Hydro Aluminium Rolled products GmbH, Bonn, Germany, 707: Tribological Conditions Leading to Igni- Rolf Luther, Fuchs Europe Schmierstoffe GmbH, tion Phenomena of Energetic Materials Mannheim, Germany Rudy Charlery, Aurélien Saulot, LAMCOS ­ INSA­ Lyon, Villeurbanne, France, Nicolas Daly, HERAKLES 1210: Wear Debris Generation During Cold ­ SAFRAN Group, Vert­le­Petit, France, Yves Berthier, Rolling Process LAMCOS ­ INSA­Lyon, Villeurbanne, France Willian Labiapari, Cláudio M. de Alcântara, Aperam South America, Timóteo, MG, Brazil, Henara L. Costa, 794: Effect of Spherical Inclusions on Contact Jose Daniel De Mello, Universidade Federal de Pressure Distribution and Friction Coefficient Uberlândia, Uberlândia, MG, Brazil Koffi E. Koumi, Julien Leroux, Thibaut Chaise, Daniel Nelias, INSA­Lyon, Villeurbanne, France TH3-MF4 Machining and Cutting 842: Tribological Characteristics between Systems Snow and Mechanical Materials and in Snow Room 7 14:00 – 16:00 Toshikazu Fujino, Masajiro Abe, Daiju Okano, Taruho Sen, Nagaoka University of Technology, 175: Nanoindentation Numerical Simulations Nagaoka, Japan, Isao Kamiishi, National Research and Comparison with Experimental Results Institute for Earth Science and Disaster Prevention, for TiN Film Nagaoka, Japan, Katsumi Iwamoto, Tokyo University José D. Bressan, Santa Catarina State University ­ of Marine Science and Technology, Tokyo, Japan UDESC, Joinville, SC, Brazil, Carlos M. Lepienski, Federal University of Paraná – UFPR, Curitiba, PR, 1031: Tribological Behaviour of Carbon Thin Brazil Films against Bearing Steel under Continuous Sliding in Hydrogen Environment 383: Particle-based Simulations of Abrasive Antti Vaajoki, VTT Technical Research Centre of Flow Machining Finland, Espoo, Finland, Hiroyoshi Tanaka, Kyushu Christian Nutto, Fraunhofer Institute for Mechanics University, Fukuoka, Japan, Simo Varjus, Helena of Materials IWM, Freiburg, Germany, Claas Ronkainen, VTT Technical Research Centre of Bierwisch, Hanna Lagger, Michael Moseler, Finland, Espoo, Finland, Joichi Sugimura, Kyushu Fraunhofer Institute for Mechanics of Materials IWM, University, Fukuoka, Japan Freiburg, Germany 1063: Evaluation of the Brake Pads Wear De- 497: Quantum Chemical Molecular Dynamics bris as a Possible Source of Contamination in Simulations of Mechano-Chemical Reactions the Analysis of GSR during Chemical Mechanical Polishing Proc- Federica Bartoli, Gabinetto Polizia Scientifica Arezzo, esses for Semiconductor Devices Arezzo, Italy, Diego Pellerej, Diego Santamaria, Kentaro Kawaguchi, Takeshi Ishikawa, Yuji Higuchi, Elena Alba, Pietro Buonfico, ITT Motion Technology Nobuki Ozawa, Momoji Kubo, Tohoku University, Italia srl, Barge (CN), Italy, Gabriel Ingo, Giuseppina Sendai, Japan Padeletti, ISMN­CNR, Montelibretti (RM), Italy 608: The Study of the Tribological Perform- ance of Ti Based Nitride Coating TH2-MT7 Nano-fluids and Composites Jiesong Tu, Jianhua Xu, Jian Li, Wuhan Research Room 1 11:00 – 13:00 Institute of Materials Protection, Wuhan, China 708 – Keynote: Nanotribology: Tribotronics, 645: Application of MoS2 and (PTFE+graphite) Ionic Liquids and Control of Surface Interac- Coating on End Mill Cutters for Arresting BUE tions During Machining of Pure Aluminium Rubén Á. Asencio, Emily D. Cranston, Deb Suresh Kannan I, Amitava Ghosh, Indian Institute of Wakeham, Petru Niga, KTH Royal Institute of Technology Madras, Chennai, India Technology, Stockholm, Sweden, Oliver Werzer, 817: Investigation of the Reaming Operation James Sweeney, University of Newcastle, Callaghan, of Holes Machined in Sintered Carbon-Iron Australia, Florian Hausen, INM—Leibniz­Institute Pistons for New Materials, Saarbrücken, Germany, Robert Vanessa A. Oliveira Rosa, Márcio Bacci da Silva, Hayes, Grant B. Webber, University of Newcastle, Luciano J. Arantes, Federal University of Uberlândia, Callaghan, Australia, Frank Endres, Clausthal Uberlândia, Brazil University of Technology, Clausthal­Zellerfeld, Germany, Roland Bennewitz, INM—Leibniz­Institute for New Materials, Saarbrücken, Germany, Nicklas Hjalmarsson, Sergei Glavatskih, KTH Royal Institute of Technology, Stockholm, Sweden, Rob Atkin, University of Newcastle, Callaghan, Australia, Mark

52 WTC 2013 Technical Sessions

W. Rutland, KTH Royal Institute of Technology, 893: Why is there Nonlinearity of Deforma- Stockholm, Sweden tion Energy during Mechanism Transitions of 804: Tribological Behavior of Carbon Fibers PTFE Scratching? and Multi-wall Carbon Nanotubes Reinforced Juliana R. de Souza, Nayane C. M. C. Sá Leitão, UHMWPE. Mariana S. P. de Azevedo, Ludimila S.P. de Azevedo, Vanesa Martínez Nogués, University of Southampton, Plínio M. Oliveira, Efrain P. Matamoros, João T.N. de Southampton, United Kingdom, María J. Martínez‐ Medeiros, Federal University of Rio Grande do Norte, Morlanes, Francisco J Pascual, Universidad de Natal, Brazil Zaragoza, Zaragoza, Spain, Steven Kurtz, Drexel 1007: Surface Characterization of Mold Steel University, Philadelphia, PA, United States, José A. in Injection Molding of Glass Fiber-reinforced Puértolas, Universidad de Zaragoza, Zaragoza, Spain Polymers 602: Electro-potential Dependent Frictional Isidoro Martínez‐Mateo, Francisco‐José Carrión‐ Characteristic on Self-organized Metallic Vilches, Maria‐Dolores Bermúdez, Universidad Nanopore Structures Politécnica de Cartagena, Cartagena, Spain Sunghan Kim, Hong Liang, Texas A&M University, 1219: Effect of Ethanol on Lubricated Sliding College Station, TX, United States Wear of Al and Mg Alloys and Composites 657: Tribology of Self-lubricating SU-8 Com- Anindya Banerji, Afsaneh Edrisy, Ahmet T. Alpas, posites for MEMS Applications University of Windsor, Windsor, ON, Canada Prabakaran Saravanan, Nalam Satyanarayana, Hai Minh Duong, National University of Singapore, TH4-MT9 Polymers 2 Singapore, Sujeet K. Sinha, Indian Institute of Room 1 16:30 – 18:50 Technology, Kanpur, India 5: Experimental Study on the Tribological Be- 483: Friction Coefficient Mapping (FCM) and- havior of Bamboo Fiber Reinforced Brake Contact AdhesionMapping (CAM): Surface Mi- Composites under Water Lubrication crostructure and Function Youxi LIN, Wei XIE, Fushan HE, Chenghui GAO, Rubén Álvarez Asencio, Eleonora Bettini, Jinshan Fuzhou University, Fuzhou, China Pan, Esben Thormann, Mark W. Rutland, KTH Royal 6: The Importance of Wall Friction between Institute of Technology, Stockholm, Sweden Particulate Solids and Elastomeric Belt 451: Mixed and Boundary Lubrication Charac- Stanislaw F. Scieszka, Daniel Adamecki, Silesian teristics of Resin Overlay for Plain Bearing University of Technology, Gliwice, Poland Materials 923: Effect of Shaft Roughness and Pressure Hiromitsu Katsuki, Hiroki Kobayakawa, Colin on Friction of Polymer Bearings in Water McAleese, Naohisa Kawakami, Yoshiaki Sato, Daido Arash Golchin, Luleå University of Technology, Luleå, Metal CO. Ltd., Inuyama, Japan Sweden, Tan Dat Nyguyen, Patrick De Baets, Ghent University, Gent, Belgium, Braham Prakash, Luleå TH3-MT8 General Issues University of Technology, Luleå, Sweden, Sergei Room 1 14:00 – 16:00 Glavatskih, Royal Institute of Technology, Stockholm, 967: Characteristics of Erosive Wear with Sweden Multi Component Cast Iron 100: Role of Crystallinity on Wear Behavior of Kenta Kusumoto, Kazumichi Shimizu, Hiroya Hara, PTFE Composites Muroran Institute of Technology, Muroran, Japan, Marcello Conte, Beatriz Fernandez, Amaya Igartua, Masahito Tanaka, Sankyo Alloy Casting Co. Ltd, IK4­TEKNIKER, Eibar, Spain Osaka, Japan, Olecsandr Cheikiakah, Vasily 861: Role of Amount Aramid Fibers on the Iefremenko, Yuliia Chabak, Pryazovskyi State Tribo-Performance Properties of NAO Fric- Technical University, Mariupol, Ukraine tion Materials 857: Advanced Cermets as Tribomaterials Neelamegam Aranganathan, Bijwe Jayashree, Indian Irina Hussainova, Maksim Antonov, Jakob Institute of Technology, New Delhi, India Kübarsepp, Tallinn University of Technology, Tallin, 735: The Tribological Properties of the Pol- Estonia yaryletherketone (PAEK) Family at High 840: Modeling of Wear in Silicon Nitride in Speed and High Temperature Rolling-sliding Contact Christopher J. Dyson, Malcolm F. Fox, University of Iyas Khader, German Jordanian University, Amman, Leeds, Leeds, United Kingdom, Bill Hopkins, ROCOl Jordan, Dominik Kürten, Fraunhofer Institute for Lubricants, Leeds, United Kingdom, Martin Priest, Mechanics of Materials IWM, Freiburg, Germany, University of Leeds, Leeds, United Kingdom Andreas Kailer, Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany

53 Technical Sessions WTC 2013

JM – Joint Mechanics Research and Supervisory Centre of Underground Mining Co.Ltd., Lędziny, Poland, Monika Madej, TH4-JM2 Tribology and Wear within Dariusz Ozimina, Technical University Kielce, Kielce, Frictional Joints Poland Room 8 16:30 – 18:50 NT – Novel Aspects in Tribology 911: Research on the Tribological Reliability of the Piezoelectric Contact TH1-NT1 Novel Tribosystems and Juozas Padgurskas, Raimundas Rukuiža, Lubrication Aleksandras Stulginskis University, Kaunas, Room 8 8:30 – 10:30 Lithuania, Ramutis Bansevičius, Kaunas University of Technology, Kaunas, Lithuania, Audrius Žunda, 91: Tribotronics – The Advent of a New Para- Aleksandras Stulginskis University, Kaunas, digm for Tribological Systems? Lithuania, Valentin Mihailov, Institute of Applied Ian Sherrington, University of Central Lancashire, Physics, Chisinau, Moldova Preston, United Kingdom, Sergei Glavatskikh, KTH Royal Institute of Technology, Stockholm, Sweden 436: High Temperature Comparative Tribo- logical Study of CoCrTaAlY Coatings Rein- 572: Evaluation of Novel Liquid Crystal Lubri- forced with Different Percentages of Alumina cants with Minimum Friction Coefficients in Daniele Botto, Mario Lavella, Muzio Gola, Paolo the Context of Micromechanical Sliding Bear- Zanon, Politecnico di Torino, Torino, Italy ings Susanne Beyer‐Faiss, Werner Stehr, Dr. Tillwich 433: Utilization of Abbott-Firestone Curves to GmbH Werner Stehr, Horb, Germany Characterize the Wear Behavior of Low Wear Rate Coating Layers 1113: Effects of Interfacial Free Energy on Ad- Daniele Botto, Mario Lavella, Muzio Gola, Politecnico hesive Friction Behavior of Elastomer Sur- di Torino, Torino, Italy faces under Wet Condition Satoshi Momozono, Yoji Iguchi, Kazuya Oshikiri, 598: Characterization of Contact Parameters Kenya Nakamura, Keiji Kyogoku, Tokyo Institute of and Fretting Wear Behavior of T-800 Coating Technology, Tokyo, Japan on Inconel 718 Mario Lavella, Daniele Botto, Muzio M. Gola, 424: pH Value Effect on Friction between Sil- Politecnico di Torino, Torino, Italy ica Surfaces and Shear Thickening of Silica Suspensions 1327: Impact of Synergic Interactions between Lei Shan, Yu Tian, Jun Zhang, Yonggang Meng, Sliding Frequency and a Cyclic Variation of Tsinghua University, Beijing, China Normal Force on Ti-6Al-4V/ Ti-6Al-4V Gross Slip Fretting Wear Response 906: Lubrication Issues in Granular Suspension Siegfried Fouvry, Benjamin Van‐Peteghem, Mariana Rheology Mendes, Patricia Neubauer, École Centrale de Lyon, Nicolas Fernandez, Lucio Isa, ETH Zürich, Zürich, Écully, France Switzerland, Juliettte Cayer‐Barrioz, CNRS, Écully, France, Nicholas D. Spencer, ETH Zürich, Zürich, 999: Simulation of Starved Lubrication in Switzerland Spherical Joints Holger Fuchs, Henning Haensel, Ruhr­University 395: Numerical Study of Grain Shape in Bochum, Bochum, Germany, Oliver Habel, Daimler Granular Lubrication AG, Sindelfingen, Germany, Jan Scholten, Ruhr­ Claas Bierwisch, Michael Moseler, Fraunhofer University Bochum, Bochum, Germany Institute for Mechanics of Materials IWM, Freiburg, Germany 253: Development of a Coupling Metric to As- sess the Shakedown Limits for a Contact In- TH2-NT2 Novel Techniques terface Matthew R. Brake, Sandia National Laboratories, Room 8 11:00 – 13:00 Albuquerque, NM, United States, Robert R. Flicek, 380: Analysing Contact Interfaces with the David A. Hills, Anothai Thaitirarot, University of Use of Ultrasonic Rayleigh Waves Oxford, Oxford, United Kingdom Eng Seng Ooi, Robert Dwyer‐Joyce, Sheffield University, Sheffield, United Kingdom PS3-JM Posters 904: The Real-Time Measurement of Wear Atrium 8:30 – 16:30 using Ultrasonic Reflectometry 148: Tribological Aspects of Shaft Hoist Ropes Henry Brunskill, Phil Harper, Tribosonics Ltd, Wear and Durability Sheffield, United Kingdom, Roger Lewis, University of Michał Styp‐Rekowski, University of Technology and Sheffield, Sheffield, United Kingdom Life Sciences, Bydgoszcz, Poland, Maciej 399: High Velocity Particle Impactor – Model- Matuszewski, University of Technology and Life ing and Experimental Verification of Impact Sciences, Bydgoszcz, Poland, Eugeniusz Mańka, Wear Tests

54 WTC 2013 Technical Sessions

Marian Apostol, Veli‐Tapani Kuokkala, Tampere Material and Beam Technology, Dresden, Germany, University of Technology, Tampere, Finland, Anssi Johann Schnagl, BMW AG, München, Germany, Rolf Laukkanen, Kenneth Holmberg, Richard Waudby, Luther, Fuchs Europe Schmierstoffe, Mannheim, VTT Technical Research Centre of Finland, Espoo, Germany Finland, Matti Lindroos, Tampere University of Technology, Tampere, Finland PS3-NT Posters 647: Tribological Tests in H2O2 Environment Atrium 8:30 – 16:30 for Components in Packaging Machines 590: Actuality and Perspectives of Triboin- Roberta Valle, Centro Sviluppo Materiali S.p.A., formatics Roma, Italy, Manuela Franchi, Tetra Pak Packaging Lev Evelson, Bryansk State Academy of Engineering Solutions, Modena, Italy and Technologies, Bryansk, Russian Federation, 556: Clarification of the Wear Property of Mayya Rafalovskaya, Bryansk State Technical DLC under Pressurized Hot Water at 30 MPa University, Bryansk, Russian Federation and 300°C 764: Photoelastic Observations of Fast Tran- Yuji Yagi, Haci A. Tasdemir, Takayuki Tokoroyama, sient Behaviors of Contact Area between an Noritsugu Umehara, Nagoya University, Nagoya, Elastic Belt and a Pulley Japan, N. Inayoshi, K. Sasaki, DENSO Corporation, Ken Nakano, Chiharu Tadokoro, Naohiro Kado, Kariya, Japan Yokohama National University, Yokohama, Japan 212: A New Test Rig for Spline Couplings Vincenzo Cuffaro, Francesca Curà, Politecnico di Torino, Torino, Italy, Marco Facchini, Avio s.p.a., Rivalta (TO), Italy

TH3-NT3 Novel Materials and Phenomena Room 8 14:00 – 16:00 1268: Effect of Friction of Catalyst on the Oxi- dation of Ethylene Ken'ichi Hiratsuka, Takaaki Tsutsumi, Chiba Institute of Technology, Narashino, Japan 555: Hydrocarbon Decomposition and Hydro- gen Generation by Reaction of Greases with Nascent Clean Steel Surface Toshiaki Wakabayashi, Kagawa University, Takamatsu, Japan, Yasuha Tokumo, Kentaro Yamaguchi, Kiyomi Sakamoto, Yuji Shitara, JX Nippon Oil & Energy Corporation, Yokohama, Japan 93: Wear Characterization of a Masonry Brick towards the Sudy of its Particle Emission Ten- dency Neeraj Shandilya, Olivier Le Bihan, Christophe Bressot, Institut National de l’Environnement Industriel et des Risques (INERIS), Verneuil­en­ Halatte, France, Martin Morgeneyer, Université de Technologie Compiègne, Compiègne, France 96: Tribological Behaviour of Metallic Glass: the Underlying Mechanism Mohammad L. Rahaman, Liangchi Zhang, Haihui Ruan, The University of New South Wales, Sydney, Australia 388: Superlubricity - Friction and Wear Phe- nomena of Hydrogen-Free Tetrahedral Amorphous Carbon (ta-C) Coatings Stefan Makowski, Fraunhofer Institute for Material and Beam Technology, Dresden, Germany, Lisa Krell, BMW AG, München, Germany, Jürgen Rausch, Fuchs Europe Schmierstoffe, Mannheim, Germany, Frank Schaller, Volker Weihnacht, Fraunhofer Institute for

55 Technical Sessions WTC 2013 Friday, September 13TH Elena Pierro, Università degli Studi della Basilicata, Potenza, Italy, Giuseppe Carbone, Luciano Afferante, Francesco Bottiglione, Politecnico di Bari, Bari, Italy BM - Biomimetics 198: Coupling of Adhesion and Friction of Gecko Setal Array During Sliding FR1-BM2 Superhydrophobic, Self- Yu Tian, Jin Wan, Yonggang Meng, Xiangjun Zhang, cleaning, Low Friction Tsinghua University, Beijing, China, Noshir Pesika, Surfaces Tulane University, New Orleans, LA, USA Room 4 8:30 – 10:30 800: A Bio-inspired Micro-structured Surface 77 – Keynote: Lotus Effect: Surfaces with with Anisotropic Adhesion Roughness-Induced Superhydrophobicity, Self Luciano Afferrante, Francesco Bottiglione, Elena Cleaning and Low Adhesion Pierro, Giuseppe Carbone, Politecnico di Bari, Bari, Bharat Bhushan, Ohio State University, Columbus, Italy OH, United States 874: Dynamic Analysis of an Adhesive Fibrillar 314: Simulation Analysis on Drag Reduction Contact Performance of Shell Surfaces with Antifoul- Turgay Eray, Istanbul Technical University, Istanbul, ing Ability Turkey, Bilsay Sümer, Hacettepe University, Ankara, Xiuqin Bai, Xuan Zhang, Chengqing Yuan, Turkey, İlker M. Koç, Istanbul Technical University, Chengwang Lei, Xinping Yan, Wuhan University of Istanbul, Turkey Technology, Wuhan, China 802: Detachment of Adhering Membranes: 889: Tuning Roughness to Design Robust Su- Double Peeling vs Conical Peeling perhydrophobic Surfaces Luciano Afferrante, Giuseppe Carbone, Politecnico di Francesco Bottiglione, Luciano Afferrante, Bari, Bari, Italy, Nicola M. Pugno, University of Politecnico di Bari, Bari, Italy, Elena Pierro, Trento, Trento, Italy Università degli Studi della Basilicata, Potenza, Italy, Giuseppe Carbone, Politecnico di Bari, Bari, Italy ST – Surface Tribology 705: Controllable Partial Wetting on Microw- FR1-ST26 Texturing 4 rinkle Surfaces Takuya Ohzono, Nanosystem Research Institute, Room 3 8:30 – 10:30 AIST, Tsukuba, Japan 458: Wear Resistant Property of Stainless 325: Aqueous Lubrication of Sliding Contacts Steel Modified by Friction Reforming of Polymeric Surfaces by means of Polymer Han Chen, Masayuki Shima, Takashi Sugawara, Brushes Tatsuhiro Jibiki, Tokyo University of Marine Science Troels Røn, Irakli Javakhishvili, Søren Hvilsted, and Technology, Tokyo, Japan Seunghwan Lee, Technical University of Denmark, 1013: Study of the Film Forming Technology Kgs. Lyngby, Denmark to the Cylindrical Materials Using Friction 623: Bioinspired Solutions for Lubrication Hideki Akita, Hitachi Construction Machinery Co.,Ltd, Tiina Ahlroos, VTT Technical Research Centre of Tsuchiura, Japan, Masayuki Shima, Takashi Finland, Espoo, Finland, Vesa Saikko, Aalto Sugawara, Tatsuhiro Jibiki, Yasuhiro Konda, Tokyo University, Aalto, Finland, Timo Hakala, Päivi University of Marine Science and Technology, Tokyo, Laaksonen, Robert Roozeman, Riitta Mahlberg, Japan Markus Linder, Aino Helle, VTT Technical Research 713: Effects of Surface Texture on the Tribo- Centre of Finland, Espoo, Finland, Petri Kuosmanen, logical Properties of Ti-6Al-4V Sliding against Aalto University, Aalto, Finland, Kenneth Holmberg, Si3N4 Balls in Water Lubrication VTT Technical Research Centre of Finland, Espoo, Fei Zhou, Yuejun Peng, Zhenfu Zhang, Xianliang Finland Wang, Jianning Cheng, Naizhang Yun, Nanjing University of Aeronautics and Astronautics, Nanjing, FR2-BM3 Microstructured Surfaces with China Superior Adhesive 254: Dry Friction between Laser-patterned Performance Surfaces Room 6 11:00 – 13:00 Andreas Rosenkranz, Carsten Gachot, Saarland University, Saarbrücken, Germany, Nikolay 1234 – Keynote: Nanotribology of the Fantastic Prodanov, Martin H. Müser, Jülich Supercomputing 4: Spider-silk Anchorages, Gecko Feet, Lotus Centre, Jülich, Germany, Frank Mücklich, Saarland Leaves and Graphene University, Saarbrücken, Germany Nicola M. Pugno, University of Trento, Trento, Italy 1097: Effects of Periodic Structure on EHL 714: Adhesive Performance of Mushroom- Film Formation under Pure Sliding Condition shaped Micro-pillars with Interfacial Micro- bubbles of Air

56 WTC 2013 Technical Sessions

Hiroshi Shiomi, Kazuaki Maniwa, Takashi Nogi, Italy, Nicholas Spencer, ETH Zürich, Zürich, Shingo Obara, Japan Aerospace Exploration Agency, Switzerland Tsukuba, Japan 185: Tribological Properties and Lifetime of 1087: Study of Run-in Behaviour of Laser- Electrical Contacts patterned Surfaces under Dry Sliding Condi- Jian Song, Eduard Plett, Liangliang Wang, tions Ostwestfalen­Lippe University of Applied Sciences, Björn Lechthaler, Carsten Gachot, Frank Mücklich, Lemgo, Germany Saarland University, Saarbrücken, Germany 658: Effect of Cr3C2 Reinforcement on the Tribological Performance of Inconel 625 Laser FR2-ST27 Texturing 5 Cladding Coatings Room 3 11:00 – 13:00 Davide Verdi, Miguel Á. Garrido‐Maneiro, Claudio J. 172: Fabrication and Tribological Properties of Múnez, Pedro Poza, Universidad Rey Juan Carlos, Patterned Nickel Film with Artificial Mi- Móstoles, Spain cro/Nano Cylinders 898: Multi-probe Scratching Technique as an Ying Wang, Jing Yang, Xia Li, Jianning Ding, Ningyi Interfacial Adhesion Measurement in Coated Yuan, Changzhou University, Changzhou, China Systems 320: The Adhesive and Fictional Properties of Vincent Le Houérou, Leandro Jacomine, Christian Pillar Patterned Surface Gauthier, Institut Charles Sadron, Strasbourg, France Wei Huang, Jingqiu Wang, Xiaolei Wang, Nanjing 987: Tribological Investigation of Laser Clad- University of Aeronautics & Astronautics, Nanjing, ded Ceramic Al2O3 Coatings on Aluminium China Florian Pape, Christian Nölke, Stefan Kaierle, Laser 698: Tribology of Patterned Si Surface from Zentrum Hannover e.V., Hannover, Germany, Ude D. the Nano- to the Micro-scale Hangen, Hysitron, Inc., Aachen, Germany, Rolf Reiter, Alberto Rota, Manoj Tripathi, Università di Modena e Volker Wesling, Technische Universität Clausthal, Reggio Emilia, Modena, Italy, Gian Carlo Gazzadi, Clausthal­Zellerfeld, Germany CNR ­ Istituto di Nanoscienze, Modena, Italy, Sergio 1099: Tribological Characterization of Ther- Valeri, Università di Modena e Reggio Emilia, mally Sprayed Silicon Carbide Coatings Modena, Italy Fahmi Mubarok, Norwegian University of Science 940: Submillimeter Microparts Feeding along and Technology, Trondheim, Norway, Sergio with Asymmetric Surfaces Fabricated by Ani- Armada, SINTEF Material and Chemistry, Trondheim, sotropic Etching Process of Single-Crystal Sili- Norway, Nuria Espallargas, Norwegian University of con Science and Technology, Trondheim, Norway Atsushi Mitani, Sapporo City University, Sapporo, Japan, Yasutaka Matsuo, Hokkaido University, FW – Dry Friction and Wear Sapporo, Japan FR1-FW14 Friction at the Nano, Micro 1053: How to Prevent Surfaces from Inter- and Macro Scales locking-Penrose Inspired Surface Patterns by Laser Interference Room 2 8:30 – 10:30 Carsten Gachot, Frank Mücklich, Saarland 52: Influence of Thermal Excitation in Atomic- University, Saarbrücken, Germany Scale Friction 957: Effect of Textured Interface Layer on Yazhen Wang, Yingjun Chen, Xinping Zhang, Ping Tribological Properties of Electro-deposited Huang, South China University of Technology, Silver Coatings at Room Temperature GuangZhou, China Jianliang Li, Dangsheng Xiong, Yongkun Qin, Heguo 168: Nanoscale Sliding Contacts between Zhu, Nanjing University of Science and Technology, Multi-Asperity Tips and Textured Surfaces Nanjing, China Ruiting Tong, Geng Liu, Tianxiang Liu, Northwestern Polytechnical University, Xi’an, China FR2-ST28 Coatings 9 281: Computational Chemistry Study on Room 4 11:00 – 13:00 Tribo-chemical Reaction Mechanism of 147: Wear and Scratch Resistance of Magne- Polytetrafluoroethylene in Various Environ- sium Alloys Covered by Surface Coatings ments Formed by Reaction with Imidazolium Phos- Tasuku Onodera, Kenji Kawasaki, Takayuki phonate Ionic Liquids Nakakawaji, Hitachi Research Laboratory, Hitachi, Ana‐Eva Jimenez, Tulia Espinosa, Jose Sanes, Maria‐ Japan, Yuji Higuchi, Nobuki Ozawa, Kazue Kurihara, Dolores Bermúdez, Universidad Politecnica de Momoji Kubo, Tohoku University, Sendai, Japan Cartagena, Cartagena, Spain, Antonella Rossi, 365: Stick-slip and Wear Behavior of Ceramic Università degli Studi di Cagliari, Monserrato (CA), and Polymer Materials under Reciprocating Sliding Conditions

57 Technical Sessions WTC 2013

Christian Scholz, Rolf Wäsche, BAM Federal Institute 818: The Wear Behaviors of Basalt Base for Materials Research and Testing, Berlin, Germany Glass-ceramic Coatings by Plasma Spray 528: How Nano-roughness Reduces the Inter- Coating Technique facial Scission of Glassy Polymer in the Vis- Gunhan Bayrak, Senol Yilmaz, Ugur Sen, Ediz coelastic Contact Pressure Range Ercenk, Sakarya University, Sakarya, Turkey Anne Rubin, Strasbourg University, Strasbourg, 880: Sliding Wear Behavior of Chromium France, Christian Gauthier, Strasbourg University, Boride Coated AISI 52100 Steel Strasbourg, France Ugur Sen, Fatih Aydın, İsmail H. Kara, Saduman Sen, 760: Study of Mechanisms Occurring During Sakarya University, Sakarya, Turkey Friction of Textile Surfaces 204: Tribological Behavior of Cr-doped and Michel Tourlonias, Romain Bocquet, Marie‐Ange Non-doped DLC Films Deposited on Ti-6Al- Bueno, Université de Haute­Alsace, Mulhouse, 4V Alloy by Unbalanced Magnetron Sputter- France, Siegfried Derler, René Rossi, EMPA ­ Swiss ing Federal Laboratories for Materials Science and Auezhan Amanov, Tsukasa Watabe, Ryo Tsuboi, Technology, St. Gallen, Switzerland Shinya Sasaki, Tokyo University of Science, Tokyo, Japan FR1-FW15 Control and Modification of Frictional Properties FR2-FW17 Tribology of Materials Room 5 8:30 – 10:30 Room 5 11:00 – 13:00 425: Frictional Behavior of Particulate Anti- 1294: Tribosystems for Dry Running, High Slip Agents for Hands and Fingers Performance Rolling Sliding Contacts Takeshi Yamaguchi, Toshihiro Shimakura, Takahiro Michael Widmann, WITTENSTEIN Bastian GmbH, Kawasaki, Kazuo Hokkirigawa, Tohoku University, Fellbach, Germany Sendai, Japan 1062: The Effect of Pre-sliding in Air on the 574: Effects of Photoageing on the Tribological Tribological Properties of DLC/Cr-DLC Bi- Properties of Engineering Plastics gradient Coating against Stainless Steel in Haitao Duan, Ding Wang, Kali Gu, Wuhan Research Vacuum Institute of Materials Protection, Wuhan, China Kosuke Ito, Nihon University, Koriyama, Japan, Koji 771: Influence of Environmental Factors on Matsumoto, Japan Aerospace Exploration Agency, Slip of Rubber Vulcanizates Chofu, Japan, Takanori Takeno, Tohoku University, Dariusz M. Bieliński, Institute for Engineering of Sendai, Japan, Junichi Takaku, Nihon University, Polymer Materials & Dyes, Piastów, Poland, Mariusz Koriyama, Japan, Koshi Adachi, Tohoku University, Siciński, Joanna Kleczewska, Łódź University of Sendai, Japan Technology, Łódź, Poland, Jan Mężyński, Institute for 489: Validation of a Numerical Model by Engineering of Polymer Materials & Dyes, Piastów, Means of Pin-on-disk Tests for Low Loaded Poland Dry Contacts (Al2O3-Titan Alloy) 789: Effects of Dynamic Behaviors of Asperi- Benoit Lorentz, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany, Andreas Rosenkranz, ties on Friction Coefficients Naohiro Kado, Chiharu Tadokoro, Yokohama Saarland University, Saarbrücken, Germany National University, Yokohama, Japan, Takatoshi 1121: Multi-scale Modeling of Indentation and Shinyoshi, Atsushi Suzuki, Toyota Motor Contact Fatigue: A Coupled CPFE/DD Ap- Corporation, Toyota, Japan, Ken Nakano, Yokohama proach National University, Yokohama, Japan Yilun Xu, Daniel S. Balint, Daniele Dini, Imperial College London, London, United Kingdom 778: Relating Acoustic Emission to Wear of PBT Composites against Steel 324: Tribological Behaviour of MoS2 in Hy- Constantin Georgescu, Iulian G. Birsan, Lorena drogen Environment Deleanu, "Dunarea de Jos" University of Galati, Thomas Schneider, Thomas Gradt, BAM Galati, Romania Bundesanstalt für Materialforschung, Berlin, Germany, Bernd Vierneusel, Stephan Tremmel, FR2-FW16 Surface Tribology – Coatings Sandro Wartzack, Friedrich­Alexander­University Room 2 11:00 – 13:00 Erlangen­Nuremberg, Erlangen, Germany 974: Tribological Properties of CVD Graphene LA – Lubricants and Additives Sheets on Polymer Substrates Kwang‐Seop Kim, Kyungmin Jo, Bongkyun Jang, Jae‐ FR1-LA14 Lubricants Hyun Kim, Hak‐Joo Lee, Korea Institute of Machinery Room 6 8:30 – 10:30 & Materials, Daejong, Republic of Korea 1021: In situ Analysis of Viscosity Modifiers at EHL Contact Using a FT-IR Spectroscopy

58 WTC 2013 Technical Sessions

Yasushi Hoshi, Hidetaka Nanao, Shigeyuki Mori, Zhenhuan Ye, Liqin Wang, Harbin Institute of Iwate University, Morioka, Japan technology, Harbin, China 736: Microencapsulation for Next Generation 984: Refrigerant-Lubricated Gas Foil Bearings Lubricants - A Thermo-Hydrodynamic Study Karen Mitchell, Olivier J. Cayre, Ardian Morina, Mathieu Garcia, Liebherr Aerospace Toulouse SAS, Anne Neville, University of Leeds, Leeds, United Toulouse, France, Benyebka Bou‐Saïd, INSA­Lyon, Kingdom, Gary Walker, Mike Sutton, Lubrizol Lyon, France, Jérôme Rocchi, Gregory Grau, Liebherr Limited, Derby, United Kingdom Aerospace Toulouse SAS, Toulouse, France 785: Oiliness Additive Adsorption onto Metal 448: Analysis of Sliding Friction Moment in Surface Analyzed by Infrared Reflection Ab- Ball-Cage Contact of Instrument Mini-ball sorption Spectroscopy Bearing Undergoing Oscillatory Motion Ryota Kawamura, Masato Nakashima, Takashi Shaona Jiang, Xiaoyang Chen, Shanghai University, Matsuoka, Tomoko Hirayama, Doshisha University, Shanghai, China, Jiaming Gu, Shanghai Tian An Kyotanabe, Japan Bearing Co. Ltd, Shanghai, China 1056: The Development of in Situ Chemical Sensors for Engine Oil Acidity Monitoring FR1-BE15 Fluid-Film Bearings 5 Mostafa Soleimani, Ling Wang, John K. Atkinson, Room 9 8:30 – 10:30 University of Southampton, Southampton, United 926: Experimental Study on a Hydrodynamic Kingdom, Robert I. Taylor, Shell Research Ltd, Centered Pivot Tilting-pad Thrust Bearing Chester, United Kingdom, Robert J K Wood, Jean Bouyer, Université de Poitiers, Futuroscope University of Southampton, Southampton, United Chasseneuil, France, Yuuta Nakano, Mari Nagata, Kingdom Daido Metal Co. Ltd, Inuyama, Japan, Michel Fillon, 775: Flammability of Emulsions on Hot Sur- Université de Poitiers, Futuroscope Chasseneuil, faces France Lorena Deleanu, Constantin Georgescu, Sorin 928: Experimental Identification of a Squeeze Ciortan, Liviu Şolea, "Dunarea de Jos" University of Film Damper Rotordynamic Coefficients Galati, Galati, Romania Ezequiel Trejo, Gustavo Rodríguez, Sergio Diaz, 474: Bis-ammonium Based Halogen Free Ionic Universidad Simón Bolívar, Caracas, Venezuela liquids as Lubricant Additive for Steel-Steel 1047: Development and Validation of Low Contact Friction Guide Shoe Bearing for Large Two- Rashi Gusain, Om P. Khatri, CSIR ­ Indian Institute of stroke Marine Diesel Engines Petroleum, Dehradun, India Anders Vølund, MAN Diesel & Turbo SE, Copenhagen, Denmark BE – Bearings 1313: Experimental Investigation of Innova- FR1-BE14 Rolling Bearings 6 tive Low Viscosity Synthetic Oils for Journal Bearings in Turbomachinery Applications Room 7 8:30 – 10:30 Luigi Barbato, Francesca Tognini, GE Oil & Gas, 336: False Brinelling - Influence of the Pivot- Firenze, Italy, Claudio Barzaghi, Manuela Toscanini, ing Angle on the Contact Mechanics and the Eni S.p.A., San Donato Milanese (MI), Italy Wear Mechanisms in the Contact between 525: Experimental Test of Dynamic Charac- Roller and Raceway teristics of Tilting Pad Thrust Bearing Markus Grebe, Paul Feinle, Mannheim University of Qing Ge, Shanghai Electric Power Generation Applied Sciences, Mannheim, Germany, Pavol Equipment Co., Shanghai, China, Bing Wu, Chunyang Blaškovitš, Slovak University of Technology in Zang, Jian Jin, Xiaojing Wang, Shanghai University, Bratislava, Trnava, Slovakia Shanghai, China 224: Comparison of the EHL Characteristics 761: Comparative Performance Study of Hy- for Different Roller Axial Profiles brid Bearings with Different Structures Tae‐Jo Park, Gyeongsang National University, Jinju, Lin Wang, Shiyuan Pei, Hua Xu, Xi’an Jiaotong Republic Of Korea University, Xi’an, China 192: Radial Stiffness of an Angular Contact Ball Bearing under Cryogenic Temperature FR2-BE16 Fluid- Film and Rolling Tomoya Nakamura, Satoshi Takada, Masataka Bearings Kikuchi, Takayuki Sudou, Japan Aerospace Room 7 11:00 – 13:00 Exploration Agency, Kakuda, Japan, Tomoyuki 375: Performance Test and Development of Takano, Japan Aerospace Technology Foundation, the Test Rig for the Water Lubricated Ball Kakuda, Japan Bearing 296: Cage Instability of High Speed Ball Bear- Choong Hyun Kim, Jun Hyeon Jo, Korea Institute of ing in Starting Process Science and Technology, Seoul, Republic of Korea

59 Technical Sessions WTC 2013

652: Experimental Study on the Power Con- Grzegorz Standziak, Katowice Coal Holding sumption of High-speed Tilting-Pad Journal Company, Katowice, Poland, Stanisław Strzelecki, Bearing Institute of Textile Machinery "Polmatex­Cenaro”, Yongsheng Zhu, Key Laboratory of Education Łódź, Poland, Zygmunt Towarek, Łódź University of Ministry for Modern Design and Rotor­Bearing Technology, Łódź, Poland System, Xi’an, China, Jun Hong, State Key Laboratory 1247: Effect of Lobe Geometry on the Maxi- for Manufacturing Systems Engineering, Xi’an, China, mum Oil Film Temperature of Multilobe Jour- Pengju Li, Youyun Zhang, Key Laboratory of nal Bearings Education Ministry for Modern Design and Rotor­ Sobhy M. Ghoneam, Menoufya University, Shebin El­ Bearing System, Xi’an, China Kom, Egypt, Henryk Kapusta, Zdzisław Socha, 601: Analysis of Diamond Segmented Pads on Stanisław Strzelecki, Research Development Centre both Rotating and Stationary Bearings in Con- of Textile Machinery Polmatex­Cenaro, Łódź, Poland tact Sliding Brent A. Lingwall, US Synthetic Corporation, Orem, EC – ECOTRIB 2013 – Tribology of UT, United States, Joonyoung Jang, Michael M. Machine Elements Khonsari, Louisiana State University, Baton Rouge, LA, United States, Tim N. Sexton, US Synthetic FR2-EC14 Wear Corporation, Orem, UT, United States Room 10 11:00 – 13:00 1325: A Complementarity Formulation for the 326: The Influence of High Toughness Silicon EHL Analysis of a Connecting Rod Big End Steels on Applications Demanding Low Fric- Bearing tion and High Load Carrying Capacity Matteo Giacopini, Luca Bertocchi, Andrea Baldini, Christian Scholz, Dirk Spaltmann, Mathias Woydt, University of Modena and Reggio Emilia, Modena, BAM Federal Institute for Materials Research and Italy, Daniele Dini, Imperial College London, London, Testing, Berlin, Germany United Kingdom 470: Increase Wear Resistance and Micro- 1326: A Complementarity Formulation of the hardness of 18CrNi3Mo Low Carbon Steel by Tangential Velocity Slip Problem in Lubricant Surface Treatment Films Mazhyn Skakov, Lyaila Bayatanova, D. Serikbaev Antonio Strozzi, Matteo Giacopini, Enrico Bertocchi, East Kazakhstan State Technical University, Ust­ University of Modena and Reggio Emilia, Modena, Kamenogorsk, Kazakhstan, Michael Scheffler, Otto­ Italy, Daniele Dini, Imperial College London, London, von­Guericke University, Magdeburg, Germany United Kingdom 505: Contact Modeling of Rough Surfaces 1202: New Methodologies for Rolling Contact Balázs Magyar, Bernd Sauer, University of Fatigue Performance Evaluation of Gear Oils Kaiserslautern, Kaiserslautern, Germany Ksenija Topolovec Miklozic, Powertrib Limited, Oxford, United Kingdom 591: Effects of Wall Roughness on Shear Stress in a Magnetorheological Fluid Shear FR2-BE17 Fluid-Film Bearings 6 Cell Room 9 11:00 – 13:00 Hanna G. Lagger, Claas Bierwisch, Michael Moseler, Fraunhofer Institute for Mechanics of Materials IWM, 845: Friction Model for Water Lubricated Slid- Freiburg, Germany ing Thrust Bearing Including Deformation and Wear 1227: Investigating Seizure Load and Wear Helge Grann, John Frigaard Nielsen, Grundfos Characteristics Holding A/S, Bjerringbro, Denmark Philip De Vaal, Vivian Möller, Jacques Langenhoven, University of Pretoria, Pretoria, South Africa 1155: Tilting Pad Thrust Bearing with Novel Material Selection - Experimental Comparison 1215: Electro-mechanical Contact between of Low and Medium Speed Operation Pantograph Strip and Catenary Contact Wire: Michał Wasilczuk, Michał Wodtke, Gdańsk Laboratory Tests and Wear Model University of Technology, Gdańsk, Poland, Wolfgang Giuseppe Bucca, Andrea Collina, Ezio Tanzi, Braun, Schaeffler Technologies AG & Co KG, Germany Politecnico di Milano, Milano, Italy 1158: Modeling Electrical Pitting on Tilting- MT – Tribology of Materials pad Thrust Bearings Paolo Pennacchi, Pietro Borghesani, Steven FR1-MT10 Surfaces Chatterton, Andrea Vania, Politecnico di Milano, Room 1 8:30 – 10:30 Milano, Italy 1058: Comprehensive Study of ZDDP- 1211: Performance Characteristics of Low tribofilms Formed under Soft Contact Condi- Speed, Heavily Loaded Two Axial Groove Cy- tions lindrical Journal Bearings of Mine Hoisting Machine

60 WTC 2013 Technical Sessions

Kartik S. Pondicherry, Materials Center Leoben 1018: Hydrogen Uptake in Hardened Steels GmbH, Leoben, Austria, Florian Grün, Florian under Repeated Contact Summer, István Gódor, Montanuniversität Leoben, Joichi Sugimura, Takahiro Yamanaka, Hiroyoshi Leoben, Austria, Emmanuel Lainé, Infineum UK Tanaka, Kyushu University, Fukuoka, Japan Limited, Milton Hill, United Kingdom, Martin 939: Experimental Study of Hydrogen Sealing Offenbecher, Miba Bearing Group, Laakirchen, Ability and Wear Characteristics of Polymer Austria Composites 1217: Study of Micro Hardness, Roughness, Hayato Ideguchi, Yoshinori Sawae, Takehiro Morita, Wear and Corrosion behaviour of Ni/CNT Kazuhiro Nakashima, Joichi Sugimura, Kyushu and Ni/GNP Composite Coatings Produced by University, Fukuoka, Japan Electrodeposition Muhammad R. Abdul Karim, Matteo Pavese, Daniele JM – Joint Mechanics Ugues, Azhar Hussain, Andrea G. Pisa, Politecnico di Torino, Torino, Italy, Elisa P. Ambrosio, Italian FR1-JM3 Friction Damping in Institute of Technology, Torino, Italy, Sara Biamino, Aerospace Application Paolo Fino, Claudio F. Badini, Politecnico di Torino, Room 10 8:30 – 10:30 Torino, Italy 255: Reduced Order Modelling of Nonlinear 1259: Wear Prediction from Energy Consid- Structures with Frictional Interfaces erations in Alumina with Different Grain Sizes Matthew R. Brake, Sandia National Laboratories, Álvaro Rico, Felipe Orgaz, Instituto de Cerámica y Albuquerque, NM, United States, Pascall Reuss, Vidrio, Madrid, Spain, Jesús Rodríguez, Universidad Lothar Gaul, University of Stuttgart, Stuttgart, Rey Juan Carlos, Móstoles, Spain Germany, Daniel J. Segalman, Sandia National 1077: Wear of Different Material Pairings for Laboratories, Albuquerque, NM, United States the Piston Ring – Cylinder Liner Contact 1127: Modelling Friction Contacts in Nonlinear Thomas Wopelka, Claudia Lenauer, Johannes Vibration of Bladed Disks Sequard‐Base, Karoline Steinschütz, Lukas Spiller, Loic Salles, Christoph Schwingshackl, Jeff Green, Andreas Pauschitz, Martin Jech, AC2T Research Imperial College London, London, United Kingdom GmbH, Wiener Neustadt, Austria 1032: Dynamic Identfication of Friction Damp- 896: Ultra-Low Wear Nanocomposites ing in the Joints of an Engine-Like Bladed- Angela A. Pitenis, Brandon A. Krick, Jeffrey J. Ewin, Disks W. Gregory Sawyer, University of Florida, Gainesville, Daniele Botto, Christian Firrone, Politecnico di FL, United States Torino, Torino, Italy, Paolo Calza, AVIO Spa, Torino, Italy, Muzio Gola, Politecnico di Torino, Torino, Italy FR2-MT11 Coatings 599: Experimental Investigation on the Damp- Room 1 11:00 – 13:00 ing Effectiveness of Blade Root Joints 1140 – Keynote: New Experimental Findings on Christian M. Firrone, Ilaria Bertino, Stefano Zucca, the Role of Initial Material Transfer in Deter- Muzio Gola, Politecnico di Torino, Torino, Italy mining Friction and Surface Damage 412: The Effect of Friction Contacts on the Staffan Jacobson, Jannica Heinrichs, Uppsala Dynamics of a Rotating Vane Segments Array University, Uppsala, Sweden, Mikael Olsson : Simulation and Comparison with Experimen- 1306: In Situ Detection of Hydrogen Evolution tal Results During Lubricated Sliding Contact Teresa Berruti, Christian M. Firrone, Muzio M. Gola, Dominik Kuerten, Nicholas Winzer, Andreas Kailer, Politecnico di Torino, Torino, Italy, Paolo Calza, AVIO Wulf Pfeiffer, Matthias Scherge, Fraunhofer Institute SpA, Rivalta di Torino (TO), Italy for Mechanics of Materials IWM, Freiburg, Germany 539: Investigation of under-platform Damper 1136: Modeling the Propagation of Rolling Kinematics and its Interaction with Contact Contact Fatigue (RCF) Cracks in the Presence Parameters (Nominal Friction Coefficient) of Lubricant Muzio Gola, Tong Liu, Politecnico di Torino, Torino, Robert Balcombe, Mark T. Fowell, Amir Kadiric, Italy, Marcelo Braga dos Santos, Federal University Daniele Dini, Andrew V. Olver, Imperial College of Uberlândia, Uberlândia, Brazil London, London, United Kingdom 1283: Effects of Hydrogen on Friction and NT – Novel Aspects in Tribology Wear Behavior of DLC Films FR1-NT4 Novel Applications Shinya Sasaki, Kenta Oshima, Ryo Tsuboi, Tokyo University of Science, Tokyo, Japan, Masahiro Room 8 8:30 – 10:30 Kawaguchi, Tokyo Metropolitan Industrial 947: Tribological Behavior of Friction Materi- Technology Research Institute, Tokyo, Japan als in Lubricated Ultrasonic Motors

61 Technical Sessions WTC 2013

Wei Qiu, Yosuke Mizuno, Kentaro Nakamura, Tokyo Institute of Technology, Yokohama, Japan 604: Investigation of Slider Disk Contact Be- havior in Helium-Air Gas Mixtures Zhengqiang Tang, South China University of Technology, Guangzhou, China, Pablo A. Salas Mendez, Frank E. Talke, University of California, San Diego, La Jolla, CA, United States 405: Surface Characterization of Spline Cou- pling Teeth Subjected to Fretting Wear Vincenzo Cuffaro, Francesca Curà, Andrea Mura, Politecnico di Torino, Torino, Italy 627: Microstructuring of Thermo- Mechanically Highly Stressed Surfaces for Ap- plication in Internal Combustion Engines Hubertus Ulmer, Friedrich Dinkelacker, Florian Engelke, Eduard Reithmeier, Leibniz Universität Hannover, Hannover, Germany, Tim Göttsching, Berend Denkena, Christoph Hübsch, Friedrich‐ Wilhelm Bach, Leibniz Universität Hannover, Garbsen, Germany, Hermann Fast, Adrian Rienäcker, Universität Kassel, Kassel, Germany 125: The Effect of Oil Availability on the Op- eration of a Piston-ring in a Large Two-stroke Marine Diesel Engine Graham Calderbank, Edward Smith, Ian Sherrington, University of Central Lancashire, Preston, United Kingdom

FR2-NT5 New Frontiers Room 8 11:00 – 13:00 550: How is Energy Dissipated through Plastic Deformation During Fretting: A Concept of Entropy Generation Yi Song, Zhendong Dai, Nanjing University of Aeronautics and Astronautics, Nanjing, China, Qunji Xue, Lanzhou Institute of Chemical Physics, Lanzhou, China 811: Anisotropic Thermal Conductivity Mod- elling by Discrete Element Method Jérôme Rivière, INSA­Lyon, Villeurbanne, France, Mathieu Renouf, Université Montpellier 2, Montpellier, France, Yves Berthier, INSA­Lyon, Villeurbanne, France 763: Quasi-Stick-Slip Motion Generated by Angular Misalignment Ken Nakano, Chiharu Tadokoro, Naohiro Kado, Yokohama National University, Yokohama, Japan 1017: Novel Tribological Aspects in Space Mechanisms: Dynamic Failure of Metallic Ad- hesion Daniele Bortoluzzi, Matteo Benedetti, Carlo Zanoni, University of Trento, Trento, Italy

62